Discovery and quantification of plastic particle pollution in human blood

Polystyrene micro and nano-particles induce metabolic rewiring in normal human colon cells: A risk factor for human health

Polystyrene is a thermoplastic polymer widely used in commercial products. Like all plastics, polystyrene can be degraded into microplastic and nanoplastic particles and ingested via food chain contamination. Although the ecological impact due to plastic contamination is well known, there are no studies indicating a carcinogenic potential of polystyrene microplastics (MPs) and nanoplastics (NPs). Here, we evaluated the effects of the MPs and NPs on normal human intestinal CCD-18Co cells. Our results show that internalization of NPs and MPs induces metabolic changes under both acute and chronic exposure by inducing oxidative stress, increasing glycolysis via lactate to sustain energy metabolism and glutamine metabolism to sustain anabolic processes. We also show that this decoupling of nutrients mirrors the effect of the potent carcinogenic agent azoxymethane and HCT15 colon cancer cells, carrying out the typical strategy of cancer cells to optimize nutrients utilization and allowing metabolic adaptation to environmental stress conditions. Taken together our data provide new evidence that chronic NPs and MPs exposure could act as cancer risk factor for human health.

Will the latest wave of the COVID-19 pandemic be an ecological disaster? There is an urgent need to replace plastic by ecologically virtuous materials

Background and Aims

Direct virological diagnosis of Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS-CoV-2) infectionis based on either viral antigen or viral genome detection. These methods, in addition to the dedicated reagents and transport packaging, require the use of quantities of plastic that may individually appear negligible but which, in the context of a pandemic, are very high. The aim was to estimate the amount of plastic involved in a diagnostic assay whether molecular or antigenic.

Methods

We weighed the plastics used to obtain a diagnostic assay result for SARS-CoV-2 infection in our hospital.

Results

Each ready-to-use antigen assay requires about 20 g of plastic whereas the PCR assay implies the use of 30 g. This unit mass, when compared to our laboratory's SARS-CoV-2 genomic screening activity,represents more than 10 tons of plastic for 2021. At our region level (#6.10 inhabitants), more than 350 tons of plastic were used to carry out more than 7 million declared PCR assays and as many antigenic assays.

Conclusions

The virologic diagnostic activityl inked to the SARS-CoV-2 pandemic has highlighted once more our dependance for plastic use. We must already think about a more environmentally virtuous diagnostic activity by integrating a reasonned use of diagnostic tools and a higher use of ecological friendly material. Parallel the notion of waste management must also be addressed in order to limit their environmental impact.

Uptake, Transport, and Toxicity of Pristine and Weathered Micro- and Nanoplastics in Human Placenta Cells

BACKGROUND

The first evidence of micro- and nanoplastic (MNP) exposure in the human placenta is emerging. However, the toxicokinetics and toxicity of MNPs in the placenta, specifically environmentally relevant particles, remain unclear.

OBJECTIVES

We examined the transport, uptake, and toxicity of pristine and experimentally weathered MNPs in nonsyncytialized and syncytialized BeWo b30 choriocarcinoma cells.

METHODS

We performed untargeted chemical characterization of pristine and weathered MNPs using liquid chromatography high-resolution mass spectrometry to evaluate compositional differences following particle weathering. We investigated cellular internalization of pristine and weathered polystyrene (PS; 0.05-10μm) and high-density polyethylene (HDPE; 0-80μm) particles using high-resolution confocal imaging and three-dimensional rendering. We investigated the influence of particle coating with human plasma on the cellular transport of PS particles using a transwell setup and examined the influence of acute MNP exposure on cell viability, damage to the plasma membrane, and expression of genes involved in steroidogenesis.

RESULTS

Chemical characterization of MNPs showed a significantly higher number of unique features in pristine particles in comparison with weathered particles. Size-dependent placental uptake of pristine and weathered MNPs was observed in both placental cell types after 24 h exposure. Cellular transport was limited and size-dependent and was not influenced by particle coating with human plasma. None of the MNPs affected cell viability. Damage to the plasma membrane was observed only for 0.05μm PS particles in the nonsyncytialized cells at the highest concentration tested (100μg/mL). Modest down-regulation of hsd17b1 was observed in syncytialized cells exposed to pristine MNPs.

DISCUSSION

Our results suggest that pristine and weathered MNPs are internalized and translocated in placental cells in vitro. Effects on gene expression observed upon pristine PS and HDPE particle exposure warrant further examination. More in-depth investigations are needed to better understand the potential health risks of MNP and chemicals associated with them under environmentally relevant exposure scenarios. https://doi.org/10.1289/EHP10873.

Cytotoxicity and Genotoxicity of Polystyrene Micro- and Nanoplastics with Different Size and Surface Modification in A549 Cells

Background

Micro- and nano-sized plastics (MPs and NPs) have become an environmental issue of global concern due to their small size, strong bio-permeability and high specific surface area. However, few studies have assessed the effect of polystyrene MPs and NPs on human lung cells. In this research, we evaluated the cytotoxicity and genotoxicity of polystyrene (PS) MPs and NPs with different sizes (2 μm and 80 nm) and surface modification (carboxy and amino functionalized polystyrene, pristine polystyrene) in A549 cells.

Methods

The zeta potential and hydrodynamic particle size of five types of PS plastic solutions were measured by dynamic light scattering, and their morphology and degree of aggregation were observed by scanning electron microscopy. After incubation of the PS plastics with A549 cells, the uptake and toxicity of the cells were assessed by fluorescence microscopy, laser scanning confocal microscopy, flow cytometry, MTT, micronucleus formation assay, and reactive oxygen species.

Results

The cytotoxicity and genotoxicity of A549 cells caused by nano-level PS is more serious than that of micro-level. Compared with unmodified PS-NPs, more surface-functionalized PS-NPs were found inside the cells, especially the accumulation of PS-NH₂. Cell viability and the induction of micronuclei (MN) are appreciably impacted in a dose-dependent way. Compared with pristine PS-NPs, functionalized PS-NPs showed stronger cell viability inhibitory ability, and induced more MN scores.

Conclusion

This study shows that the intrinsic size properties and surface modification of PS plastics, the interaction between PS plastics and the receiving medium, intracellular accumulation are critical factors for evaluating the toxicological influences of PS plastics on humans.

Microplastics induce immune suppression via S100A8 downregulation

Microplastic (MP) pollution has been largely reported in the daily consumption of water and food, however, the toxicities of MPs to human beings remain largely uncovered. We found that MPs in drinking water significantly impaired mouse immune function by reducing spleen weight, CD8⁺ T cell amount and raising CD4⁺ to CD8⁺ T cell ratio. We performed proteomics and phosphoproteomics by LC-MS/MS and found MPs significantly induced 130 and 57 proteins upregulated in proteome and phosphoproteome, and 191 and 37 proteins downregulated in proteome and phosphoproteome, separately. Bioinformatic analysis show that asthma, mineral absorption, and the IL-17 signaling pathway were significantly enriched and may be involved in MP-induced spleen damage and immune suppression. We verified the top 3 differentially expressed proteins and phosphoproteins by western blot, and we further showed that S100A8 was significantly downregulated by MPs via histochemistry staining. Our results revealed that MPs can induce spleen damage and immune suppression by reducing S100A8 expression, suggesting an underestimated influence and mechanism of MPs on the mammalian immune system.

Effects of polystyrene micro/nanoplastics on liver cells based on particle size, surface functionalization, concentration and exposure period

Micro/nanoplastics (MP/NP) contaminate our food and drinking water but their impact on human health has not been well-documented. The liver is one of the first organs that ingested MP/NP encounter and it has a major role in the clearance of xenobiotics. Therefore, the effects of polystyrene MP/NP on liver HepG2 cells were studied. Cellular responses to particles of various sizes (50-5000 nm) and surface functionalization (aminated, carboxylated or non-functionalized) were determined at different concentrations (0.1-100 μg/mL) and exposure periods (1-24 h). Smaller sized particles were internalized by HepG2 cells more avidly than larger particles regardless of functionalization; the highest uptake being for 50 and 100 nm aminated particles at lower concentrations. Confocal microscopy images of cells corroborated quantitative uptake results. Aminated particles were more toxic to the cells than carboxylated or non-functionalized particles. Among aminated particles smaller particles (50 and 100 nm) were more detrimental to cell viability compared to larger particles (1000 or 5000 nm) with toxicity increasing with concentration. Treatment with the particles for 4 h increased intracellular concentrations of Caspase-3 by 1.5-2.8 fold, but 24 h exposure to the particles attenuated this increase in Caspase-3 concentrations. A slight trend of higher Caspase-3 concentration in cells treated with larger particles (500-5000 nm) compared to smaller particles (50-200 nm) was observed, indicating that larger particles are more likely to direct cells toward apoptotic cell death upon 4 h exposure. Exposure of cells to large PS particles (500-5000 nm) upregulated interleukin-8 and the effect was enhanced at 24 h. Overall, the study demonstrated that smaller aminated particles were most toxic to hepatocytes, but larger particles induced apoptotic cell death or an inflammatory response depending on the length of exposure.

Bacterial cellulose biopolymers: The sustainable solution to water-polluting microplastics

Microplastics (MPs) pollution has become one of our time's most consequential issue. These micropolymeric particles are ubiquitously distributed across all natural and urban ecosystems. Current filtration systems in wastewater treatment plants (WWTPs) rely on non-biodegradable fossil-based polymeric filters whose maintenance procedures are environmentally damaging and unsustainable. Following the need to develop sustainable filtration frameworks for MPs water removal, years of R&D lead to the conception of bacterial cellulose (BC) biopolymers. These bacterial-based naturally secreted polymers display unique features for biotechnological applications, such as straightforward production, large surface areas, nanoporous structures, biodegradability, and utilitarian circularity. Diligently, techniques such as flow cytometry, scanning electron microscopy and fluorescence microscopy were used to evaluate the feasibility and characterise the removal dynamics of highly concentrated MPs-polluted water by BC biopolymers. Results show that BC biopolymers display removal efficiencies of MPs of up to 99%, maintaining high performance for several continuous cycles. The polymer's characterisation showed that MPs were both adsorbed and incorporated in the 3D nanofibrillar network. The use of more economically- and logistics-favourable dried BC biopolymers preserves their physicochemical properties while maintaining high efficiency (93-96%). These polymers exhibited exceptional structural preservation, conserving a high water uptake capacity which drives microparticle retention. In sum, this study provides clear evidence that BC biopolymers are high performing, multifaceted and genuinely sustainable/circular alternatives to synthetic water treatment MPs-removal technologies.

The exposure to polyvinyl chloride microplastics and chrysene induces multiple changes in the structure and functionality of marine meiobenthic communities

The effects of microplastics and sorbed polycyclic aromatic hydrocarbons at community levels were rarely assessed in laboratory experiments, despite their obvious advantage in reflecting better the natural conditions compared to traditionally single species-focused toxicological experiments. In the current study, the multifaceted effects of polyvinyl chloride and chrysene, acting alone or combined, on general marine meiobenthos, but with a special focus on free-living marine nematode communities were tested in a laboratory experiment carried in microcosms. The meiobenthos was exposed to two polyvinyl chloride (5 and 10 mg.kg^-1 Dry Weight 'DW') and chrysene (37.5 and 75 ng.g^-1 DW) concentrations, respectively, as well as to a mixture of both compounds, for 30 days. The results highlighted a significant decrease in the abundance of all meiobenthic generic groups, including nematodes, directly with increasing dosages of these compounds when added alone. The addition of chrysene adheres to microplastics, making the sediment matrix glueyer, hence inducing greater mortality among generic meiobenthic groups. Moreover, the nematofauna went through a strong restructuring phase following the exposure to both compounds when added alone, leading to the disappearance of sensitive nematodes and their replacement with tolerant taxa. However, the similarity in nematofauna composition between control and polyvinyl chloride and chrysene mixtures suggests that the toxicity of the latter could be attenuated by its physical bonding to the former pollutant. Other changes in the functional traits within the nematode communities were a decline in the fertility of females and an increase of the pharyngeal pumping power following exposure to both pollutants for the dominant species. The latter results were also supported by additional toxicokinetics analyses and in silico modeling.

The forgotten tonsils—does the immune active organ absorb nanoplastics?

Nanoplastics are defined as plastic particles broken down to extremely small sizes (1–100 nm) with unknown effects to the human body and immune system. Air and food exposure scenarios involving blood, lungs and intestine are considered in the literature. The fact that plastics also needs to pass the nose, oral cavity, and throat is so far ignored in the literature. The tonsils are immunologically important tissue in the oral cavity in which ingested and inhaled agents are incorporated through crypts with the capacity to capture agents and start early immunologic reactions. We argue that the tonsil is a very important tissue to study in regard to micro and nanoplastic human exposure and immunologic response. Nano-sized particles are known to be able to travel through the natural barriers and have different effects on biology compared to larger particle and the bulk material. It is therefore, although difficult, important to develop experimental methods to detect and identify nanoplastics in the tonsils. In preliminary experiments we have optimized the breakdown of tonsil tissues and tried to retrieve added polystyrene nanoparticles using density-based separation and concentration. The polystyrene was followed by FTIR spectrometry and could be detected in micro- and nano-size, in the tissue breakdown solution but not after density-based separation. When nanoplastics are incorporated in the human body, it is possible that the small plastic pieces can be detected in the tonsil tissue, in the lymph system and it is of importance for future studies to reveal the immunological effects for humans.

Widespread Occurrence of Non-Extractable Fluorine in Artificial Turfs from Stockholm, Sweden

Per- and polyfluoroalkyl substances (PFAS) are frequently used in the production of rubber and plastic, but little is known about the identity, concentration, or prevalence of PFAS in these products. In this study, a representative sample of plastic- and rubber-containing artificial turf (AT) fields from Stockholm, Sweden, was subjected to total fluorine (TF), extractable organic fluorine (EOF), and target PFAS analysis. TF was observed in all 51 AT samples (ranges of 16-313, 12-310, and 24-661 μg of F/g in backing, filling, and blades, respectively), while EOF and target PFAS occurred in <42% of all samples (<200 and <1 ng of F/g, respectively). A subset of samples extracted with water confirmed the absence of fluoride. Moreover, application of the total oxidizable precursor assay revealed negligible perfluoroalkyl acid (PFAA) formation across all three sample types, indicating that the fluorinated substances in AT are not low-molecular weight PFAA precursors. Collectively, these results point toward polymeric organofluorine (e.g., fluoroelastomer, polytetrafluoroethylene, and polyvinylidene fluoride), consistent with patent literature. The combination of poor extractability and recalcitrance toward advanced oxidation suggests that the fluorine in AT does not pose an imminent risk to users. However, concerns surrounding the production and end of life of AT, as well as the contribution of filling and blades to environmental microplastic contamination, remain.

Effects of plastic residues and microplastics on soil ecosystems: A global meta-analysis

Plastic pollution is one of the global pressing environmental problems, threatening the health of aquatic and terrestrial ecosystems. However, the influence of plastic residues and microplastics (MPs) in soil ecosystems remains unclear. We conducted a global meta-analysis to quantify the effect of plastic residues and MPs on indicators of global soil ecosystem functioning (i.e. soil physicochemical properties, plant and soil animal health, abundance and diversity of soil microorganisms). Concentrations of plastic residues and MPs were 1-2700 kg ha^-1 and 0.01-600,000 mg kg^-1, respectively, based on 6223 observations. Results show that plastic residues and MPs can decrease soil wetting front vertical and horizontal movement, dissolved organic carbon, and total nitrogen content of soil by 14%, 10%, 9%, and 7%, respectively. Plant height and root biomass were decreased by 13% and 14% in the presence of plastic residues and MPs, while the body mass and reproduction rate of soil animals decreased by 5% and 11%, respectively. However, soil enzyme activity increased by 7%441% in the presence of plastic residues and MPs. For soil microorganisms, plastic residues and MPs can change the abundance of several bacteria phyla and families, but the effects vary between different bacteria.

Identification of Trace Polystyrene Nanoplastics Down to 50 nm by the Hyphenated Method of Filtration and Surface-Enhanced Raman Spectroscopy Based on Silver Nanowire Membranes

Nanoplastics are emerging pollutants that pose potential threats to the environment and organisms. However, in-depth research on nanoplastics has been hindered by the absence of feasible and reliable analytical methods, particularly for trace nanoplastics. Herein, we propose a hyphenated method involving membrane filtration and surface-enhanced Raman spectroscopy (SERS) to analyze trace nanoplastics in water. In this method, a bifunctional Ag nanowire membrane was employed to enrich nanoplastics and enhance their Raman spectra in situ, which omitted sample transfer and avoided losing smaller nanoplastics. Good retention rates (86.7% for 50 nm and approximately 95.0% for 100-1000 nm) and high sensitivity (down to 10^-7 g/L for 50-1000 nm and up to 10⁵ SERS enhancement factor) of standard polystyrene (PS) nanoplastics were achieved using the proposed method. PS nanoplastics with concentrations from 10^-1 to 10^-7 g/L and sizes ranging from 50 to 1000 nm were successfully detected by Raman mapping. Moreover, PS micro- and nanoplastics in environmental water samples collected from the seafood market were also detected at the μg/L level. Consequently, the proposed method provides more possibilities for analyzing low-concentration nanoplastics in aquatic environments with high enrichment efficiency, minimal sample loss, and high sensitivity.

Polystyrene nanoparticles: the mechanism of their genotoxicity in human peripheral blood mononuclear cells

Plastic nanoparticles are widely spread in the biosphere, but health risk associated with their effect on the human organism has not yet been assessed. The purpose of this study was to determine the genotoxic potential of non-functionalized polystyrene nanoparticles (PS-NPs) of different diameters of 29, 44, and 72 nm in human peripheral blood mononuclear cells (PBMCs) (in vitro). To select non-cytotoxic concentrations of tested PS-NPs, we analyzed metabolic activity of PBMCs incubated with these particles in concentrations ranging from 0.001 to 1000 µg/mL. Then, PS-NPs were used in concentrations from 0.0001 to 100 μg/mL and incubated with tested cells for 24 h. Physico-chemical properties of PS-NPs in media and suspension were analyzed using dynamic light scattering (DLS), atomic force microscopy (AFM), scanning electron microscopy (SEM) and zeta potential. For the first time, we investigated the mechanism of genotoxic action of PS-NPs based on detection of single/double DNA strand-breaks and 8-oxo-2'-deoxyguanosine (8-oxodG) formation, as well as determination of oxidative modification of purines and pyrimidines and repair efficiency of DNA damage. Obtained results have shown that PS-NPs caused a decrease in PBMCs metabolic activity, increased single/double-strand break formation, oxidized purines and pyrimidines and increased 8oxodG levels. The resulting damage was completely repaired in the case of the largest PS-NPs. It was also found that extent of genotoxic changes in PBMCs depended on the size of tested particles and their ζ-potential value.

Occurrence, identification, and discharge of microplastics from effluent and sludge of the largest WWTP in Iran-South of Tehran

Microplastic pollution is a serious threat to the biota and humans, and wastewater treatment plants act as a pathway for entering microplastics into the environment. This study discusses the identification and quantification of microplastics in the south of Tehran municipal WWTP. The sampling was repeated three times in a month, overall, nine times for water samples and once a month in total, three times for digested sludge samples by steel bucket with the WPO method. The microplastics from water and digested sludge samples were identified using the micro-Raman microscope. According to this study, 98.9% of microplastic particles in effluent and 99.2% of microplastics particles in the sludge were fibers. The influent contained an average of 180 ± 4.3 MP/L and was reduced to 5.3 ± 0.31 MP/L in the final effluent. Despite this significant reduction, we calculate that this WWTP releases 2.3 × 10⁹ microplastics per day through final effluent and 1.61 × 10¹⁰ particles per day through dried sludge into the environment. We performed micro-Raman analyses and ICP mass to measure the amount of heavy metal absorption of MPs. In addition, SEM analyses were used to study the surface morphology of microplastic particles. PRACTITIONER POINTS: Fourteen different polymers were identified in the influent, effluent, and digested sludge. The main collected shapes obtained were fiber, film, and fragment, which fiber was the predominant polymer in this WWTP. The plant releases 2.3 * 10⁹ MPs per day to its downstream environment. This WWTP has average removal with an efficiency of 99.06%.

Weathering-independent differentiation of microplastic polymers by reflectance IR spectrometry and pattern recognition

The presence and effects of microplastics in the environment is being continuously studied, so the need for a reliable approach to ascertain the polymer/s constituting them has increased. To characterize them, infrared (IR) spectrometry is commonly applied, either reflectance or attenuated total reflectance (ATR). A common problem when considering field samples is their weathering and biofouling, which modify their spectra. Hence, relying on spectral matching between the unknown spectrum and spectral databases is largely defective. In this paper, the use of IR spectra combined with pattern recognition techniques (principal components analysis, classification and regression trees and support vector classification) is explored first time to identify a collection of typical polymers regardless of their ageing. Results show that it is possible to identify them using a reduced suite of spectral wavenumbers with coherent chemical meaning. The models were validated using two datasets containing artificially weathered polymers and field samples.

Insights into the impact of polyethylene microplastics on methane recovery from wastewater via bioelectrochemical anaerobic digestion

Bioelectrochemical anaerobic digestion (BEAD) is a promising next-generation technology for simultaneous wastewater treatment and bioenergy recovery. While knowledge on the inhibitory effect of emerging pollutants, such as microplastics, on the conventional wastewater anaerobic digestion processes is increasing, the impact of microplastics on the BEAD process remains unknown. This study shows that methane production decreased by 30.71% when adding 10 mg/L polyethylene microplastics (PE-MP) to the BEAD systems. The morphology of anaerobic granular sludge, which was the biocatalysts in the BEAD, changed with microbes shedding and granule crack when PE-MP existed. Additionally, the presence of PE-MP shifted the microbial communities, leading to a lower diversity but higher richness and tight clustering. Moreover, fewer fermentative bacteria, acetogens, and hydrogenotrophic methanogens (BEAD enhanced) grew under PE-MP stress, suggesting that PE-MP had an inhibitory effect on the methanogenic pathways. Furthermore, the abundance of genes relevant to extracellular electron transfer (omcB and mtrC) and methanogens (hupL and mcrA) decreased. The electron transfer efficiency reduced with extracellular cytochrome c down and a lower electron transfer system activity. Finally, phylogenetic investigation of communities by reconstruction of unobserved states analysis predicted the decrease of key methanogenic enzymes, including EC 1.1.1.1 (Alcohol dehydrogenase), EC 1.2.99.5 (Formylmethanofuran dehydrogenase), and EC 2.8.4.1 (Coenzyme-B sulfoethylthiotransferase). Altogether, these results provide insight into the inhibition mechanism of microplastics in wastewater methane recovery and further optimisation of the BEAD process.

Prenatal di-(2-ethylhexyl) phthalate exposure induced myocardial cytotoxicity via the regulation of the NRG1-dependent ErbB2/ErbB4-PI3K/AKT signaling pathway in fetal mice

Environmental sanitation of maternal contact during pregnancy is extremely important for the development of different fetal tissues and organs. In particular, during early pregnancy, any adverse exposure may cause abnormal fetal growth or inhibit the development of embryogenic organs. The potential risks of phthalate exposure, which affects the development of humans and animals, are becoming a serious concern worldwide. However, the specific molecular mechanism of di-(2-ethylhexyl) phthalate (DEHP)-induced cardiotoxicity in fetal mice remains unclear. In this study, animal models of DEHP gavage at concentrations of 250, 500, and 1000 mg/kg/day within 8.5-18.5 days of pregnancy were established. The cell proliferation, survival, and apoptosis rates were evaluated using CCK8, EdU, TUNEL and flow cytometry. The molecular mechanism was assessed via transcriptome sequencing, immunohistochemistry, immunofluorescence, reverse transcription-quantitative polymerase chain reaction, and Western blot analysis. In vivo, DEHP increased apoptosis, decreased Ki67 and CD31 expression, reduced heart weight and area, slowed down myocardial sarcomere development, and caused cardiac septal defect in fetal mice heart. Transcriptome sequencing showed that DEHP decreased NRG1 expression and downregulated the ErbB2/ErbB4-PI3K/AKT signaling pathway-related target genes. In vitro, primary cardiomyocytes were cultured with DEHP at a concentration of 150 μg/mL combined with ErbB inhibitor (AG1478, 10 μmol/L) and/or NRG1 protein (100 ng/mL) for 72 h. After DEHP intervention, the expression of NRG1 and the phosphorylation level of ErbB2, ErbB4, PI3K, and AKT decreased, and the apoptosis-related protein levels increased. Moreover, the apoptosis rate increased. After adding exogenous NRG1, the phosphorylation level of the NRG1/ERbB2/ERbB4-PI3K/AKT pathway increased, and the apoptosis-related protein levels decreased. Further, the apoptosis rate reduced. Interestingly, after exposure to DEHP and AG1478 + NRG1, the anti-apoptotic effect of NRG1 and cardiomyocyte proliferation decreased by inhibiting the NRG1/ERbB2/ERbB4-PI3K/AKT pathway. Hence, the NRG1-dependent regulation of the ERbB2/ERbB4-PI3K/AKT signaling pathway may be a key mechanism of DEHP-induced myocardial cytotoxicity.

Combined ingestion of polystyrene microplastics and epoxiconazole increases health risk to mice: Based on their synergistic bioaccumulation in vivo

Microplastic and pesticide are two common environmental pollutants whose adverse effects have been widely reported, but it is unclear whether they cause combined toxicity in mammals. In this study, polystyrene microplastics (5 µm, 0.012 or 0.120 mg/kg) or/and epoxiconazole (0.080 mg/kg) were administered orally to mice for 6 weeks, their toxicity to liver and kidney was assessed from changes in histopathology, tissue function, oxidative defense system and metabolic profile. In addition, mechanism of combined toxicity was explored in terms of bioaccumulation levels, intestinal barrier, gut microbiota. Results showed that combined ingestion of polystyrene (0.120 mg/kg) and epoxiconazole caused more severe tissue damage, dysfunction, oxidative stress, and metabolic disorders compared to single exposure sources. Interestingly, occurrence of combined toxicity was associated with their increased accumulation in tissues. In-depth exploration found that epoxiconazole caused intestinal barrier damage by targeting the gut microbiota, leading to massive invasion and accumulation of polystyrene, which in turn interfered with the metabolic clearance of epoxiconazole in liver. In all, findings highlighted that polystyrene and epoxiconazole could cause combined toxicity in mice through the synergistic effect of their bioaccumulation in vivo, which provided new reference for understanding the health risks of microplastics and pesticides and sheds light on the potential risk to humans of their combined ingestion.

Microplastics detected in cirrhotic liver tissue

Background

The contamination of ecosystem compartments by microplastics (MPs) is an ubiquitous problem. MPs have been observed in mice tissues, and recently in human blood, stool and placenta. However, two aspects remain unclear: whether MPs accumulate in peripheral organs, specifically in the liver, and if liver cirrhosis favours this process. We aimed to examine human liver tissue samples to determine whether MPs accumulate in the liver.

Methods

This proof-of-concept case series, conducted in Germany, Europe, analyzed tissue samples of 6 patients with liver cirrhosis and 5 individuals without underlying liver disease. A total of 17 samples (11 liver, 3 kidney and 3 spleen samples) were analyzed according to the final protocol. A reliable method for detection of MP particles from 4 to 30 µm in human tissue was developed. Chemical digestion of tissue samples, staining with Nile red, subsequent fluorescent microscopy and Raman spectroscopy were performed. Morphology, size and composition of MP polymers were assessed.

Findings

Considering the limit of detection, all liver, kidney and spleen samples from patients without underlying liver disease tested negative for MPs. In contrast, MP concentrations in cirrhotic liver tissues tested positive and showed significantly higher concentrations compared to liver samples of individuals without underlying liver disease. Six different microplastic polymers ranging from 4 to 30 µm in size were detected.

Interpretation

This proof-of-concept case series assessed the presence of MPs in human liver tissue and found six different MP polymers in the liver of individuals with liver cirrhosis, but not in those without underlying liver disease. Future studies are needed to evaluate whether hepatic MP accumulation represents a potential cause in the pathogenesis of fibrosis, or a consequence of cirrhosis and portal hypertension.

Funding

No funding was received for conducting this investigator driven study.

Implementing a GIS-Based Digital Atlas of Agricultural Plastics to Reduce Their Environmental Footprint: Part II, an Inductive Approach

Plastic pollution, largely perceived by the public as a major risk factor that strongly impacts sea life and preservation, has an even higher negative impact on terrestrial ecosystems. Indeed, quantitative data about plastic contamination on agricultural soils are progressively emerging in alarming ways. One of the main contributors to this pollution involves the mismanagement of agricultural plastic waste (APW), i.e., the residues from plastic material used to improve the productivity of agricultural crops, such as greenhouse covers, mulching films, irrigation pipes, etc. Wrong management of agricultural plastics during and after their working lives may pollute the agricultural soil and aquifers by releasing macro-, micro-, and nanoplastics, which could also enter into the human food chain. In this study, we aimed to develop a methodology for the spatial quantification of agricultural plastics to achieve sustainable post-consumer management. Through an inductive approach, based on statistical data from the agricultural census of the administrative areas of the Italian provinces, an agricultural plastic coefficient (APC) was proposed, implemented, and spatialized in a GIS environment, to produce a database of APW for each type of crop. The proposed methodology can be exported to other countries. It represents valuable support that could realize, in integration with other tools, an atlas of agricultural plastics, which may be a starting point to plan strategies and actions targeted to the reduction of the plastic footprint of agriculture.

Multiple anthropogenic stressors in the Galápagos Islands' complex social-ecological system: Interactions of marine pollution, fishing pressure, and climate change with management recommendations

For decades, multiple anthropogenic stressors have threatened the Galápagos Islands. Widespread marine pollution such as oil spills, persistent organic pollutants, metals, and ocean plastic pollution has been linked to concerning changes in the ecophysiology and health of Galápagos species. Simultaneously, illegal, unreported, and unregulated fishing are reshaping the composition and structure of endemic and native Galápagos pelagic communities. In this novel review, we discuss the impact of anthropogenic pollutants and their associated ecotoxicological implications for Galápagos species in the face of climate change stressors. We emphasize the importance of considering fishing pressure and marine pollution, in combination with climate-change impacts, when assessing the evolutionary fitness of species inhabiting the Galápagos. For example, the survival of endemic marine iguanas has been negatively affected by organic hydrocarbons introduced via oil spills, and endangered Galápagos sea lions exhibit detectable concentrations of DDT, triggering potential feminization effects and compromising the species' survival. During periods of ocean warming (El Niño events) when endemic species undergo nutritional stress, climate change may increase the vulnerability of these species to the impacts of pollutants, resulting in the species reaching its population tipping point. Marine plastics are emerging as a deleterious and widespread threat to endemic species. The Galápagos is treasured for its historical significance and its unparalleled living laboratory and display of evolutionary processes; however, this unique and iconic paradise will remain in jeopardy until multidisciplinary and comprehensive preventative management plans are put in place to mitigate and eliminate the effects of anthropogenic stressors facing the islands today. We present a critical analysis and synthesis of anthropogenic stressors with some progress from local and international institutional efforts and call to action more precautionary measures along with new management philosophies focused on understanding the processes of change through research to champion the conservation of the Galápagos. Integr Environ Assess Manag 2022;00:1-26. © 2022 SETAC.

Merging Plastics, Microbes, and Enzymes: Highlights from an International Workshop

In the Anthropocene, plastic pollution is a worldwide concern that must be tackled from different viewpoints, bringing together different areas of science. Microbial transformation of polymers is a broad-spectrum research topic that has become a keystone in the circular economy of fossil-based and biobased plastics. To have an open discussion about these themes, experts in the synthesis of polymers and biodegradation of lignocellulose and plastics convened within the framework of The Transnational Network for Research and Innovation in Microbial Biodiversity, Enzymes Technology and Polymer Science (MENZYPOL-NET), which was recently created by early-stage scientists from Colombia and Germany. In this context, the international workshop "Microbial Synthesis and Degradation of Polymers: Toward a Sustainable Bioeconomy" was held on 27 September 2021 via Zoom. The workshop was divided into two sections, and questions were raised for discussion with panelists and expert guests. Several key points and relevant perspectives were delivered, mainly related to (i) the microbial evolution driven by plastic pollution; (ii) the relevance of and interplay between polymer structure/composition, enzymatic mechanisms, and assessment methods in plastic biodegradation; (iii) the recycling and valorization of plastic waste; (iv) engineered plastic-degrading enzymes; (v) the impact of (micro)plastics on environmental microbiomes; (vi) the isolation of plastic-degrading (PD) microbes and design of PD microbial consortia; and (vii) the synthesis and applications of biobased plastics. Finally, research priorities from these key points were identified within the microbial, enzyme, and polymer sciences.

Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective

The abundance of synthetic polymers has increased due to their uncontrolled utilization and disposal in the environment. The recalcitrant nature of plastics leads to accumulation and saturation in the environment, which is a matter of great concern. An exponential rise has been reported in plastic pollution during the corona pandemic because of PPE kits, gloves, and face masks made up of single-use plastics. The physicochemical methods have been employed to degrade synthetic polymers, but these methods have limited efficiency and cause the release of hazardous metabolites or by-products in the environment. Microbial species, isolated from landfills and dumpsites, have utilized plastics as the sole source of carbon, energy, and biomass production. The involvement of microbial strains in plastic degradation is evident as a substantial amount of mineralization has been observed. However, the complete removal of plastic could not be achieved, but it is still effective compared to the preexisting traditional methods. Therefore, microbial species and the enzymes involved in plastic waste degradation could be utilized as eco-friendly alternatives. Thus, microbial biodegradation approaches have a profound scope to cope with the plastic waste problem in a cost-effective and environmental-friendly manner. Further, microbial degradation can be optimized and combined with physicochemical methods to achieve substantial results. This review summarizes the different microbial species, their genes, biochemical pathways, and enzymes involved in plastic biodegradation.

Endocrine-Disrupting Effects of Bisphenol A on the Cardiovascular System: A Review

Currently, the plastic monomer and plasticizer bisphenol A (BPA) is one of the most widely used chemicals. BPA is present in polycarbonate plastics and epoxy resins, commonly used in food storage and industrial or medical products. However, the use of this synthetic compound is a growing concern, as BPA is an endocrine-disrupting compound and can bind mainly to estrogen receptors, interfering with different functions at the cardiovascular level. Several studies have investigated the disruptive effects of BPA; however, its cardiotoxicity remains unclear. Therefore, this review’s purpose is to address the most recent studies on the implications of BPA on the cardiovascular system. Our findings suggest that BPA impairs cardiac excitability through intracellular mechanisms, involving the inhibition of the main ion channels, changes in Ca²⁺ handling, the induction of oxidative stress, and epigenetic modifications. Our data support that BPA exposure increases the risk of developing cardiovascular diseases (CVDs) including atherosclerosis and its risk factors such as hypertension and diabetes. Furthermore, BPA exposure is also particularly harmful in pregnancy, promoting the development of hypertensive disorders during pregnancy. In summary, BPA exposure compromises human health, promoting the development and progression of CVDs and risk factors. Further studies are needed to clarify the human health effects of BPA-induced cardiotoxicity.

Nanoplastic-Induced Nanostructural, Nanomechanical, and Antioxidant Response of Marine Diatom Cylindrotheca closterium

The aim of this study was to examine the effect of positively charged (amine-modified) and negatively charged (carboxyl-modified) polystyrene nanoplastics (PS NPs) on the nanostructural, nanomechanical, and antioxidant responses of the marine diatom Cylindrotheca closterium. The results showed that both types of PS NPs, regardless of surface charge, significantly inhibited the growth of C. closterium during short-term exposure (3 and 4 days). However, longer exposure (14 days) to both PS NPs types did not significantly inhibit growth, which might be related to the detoxifying effect of the microalgal extracellular polymers (EPS) and the higher cell abundance per PS NPs concentration. The exposure of C. closterium to both types of PS NPs at concentrations above the corresponding concentrations that resulted in a 50% reduction of growth (EC50) demonstrated phytotoxic effects, mainly due to the excessive production of reactive oxygen species, resulting in increased oxidative damage to lipids and changes to antioxidant enzyme activities. Diatoms exposed to nanoplastics also showed a significant decrease in cell wall rigidity, which could make the cells more vulnerable. Atomic force microscopy images showed that positively charged PS NPs were mainly adsorbed on the cell surface, while both types of PS NPs were incorporated into the EPS that serves to protect the cells. Since microalgal EPS are an important food source for phytoplankton grazers and higher trophic levels, the incorporation of NPs into the EPS and interactions with the cell walls themselves may pose a major threat to marine microalgae and higher trophic levels and, consequently, to the health and stability of the marine ecosystem.

Impact of waste of COVID-19 protective equipment on the environment, animals and human health: a review

During the Corona Virus Disease 2019 (COVID-19) pandemic, protective equipment, such as masks, gloves and shields, has become mandatory to prevent person-to-person transmission of coronavirus. However, the excessive use and abandoned protective equipment is aggravating the world's growing plastic problem. Moreover, above protective equipment can eventually break down into microplastics and enter the environment. Here we review the threat of protective equipment associated plastic and microplastic wastes to environments, animals and human health, and reveal the protective equipment associated microplastic cycle. The major points are the following:1) COVID-19 protective equipment is the emerging source of plastic and microplastic wastes in the environment. 2) protective equipment associated plastic and microplastic wastes are polluting aquatic, terrestrial, and atmospheric environments. 3) Discarded protective equipment can harm animals by entrapment, entanglement and ingestion, and derived microplastics can also cause adverse implications on animals and human health. 4) We also provide several recommendations and future research priority for the sustainable environment. Therefore, much importance should be attached to potential protective equipment associated plastic and microplastic pollution to protect the environment, animals and humans.

Raman Microspectroscopy Detection and Characterisation of Microplastics in Human Breastmilk

The widespread use of plastics determines the inevitable human exposure to its by-products, including microplastics (MPs), which enter the human organism mainly by ingestion, inhalation, and dermal contact. Once internalised, MPs may pass across cell membranes and translocate to different body sites, triggering specific cellular mechanisms. Hence, the potential health impairment caused by the internalisation and accumulation of MPs is of prime concern, as confirmed by numerous studies reporting evident toxic effects in various animal models, marine organisms, and human cell lines. In this pilot single-centre observational prospective study, human breastmilk samples collected from N. 34 women were analysed by Raman Microspectroscopy, and, for the first time, MP contamination was found in 26 out of 34 samples. The detected microparticles were classified according to their shape, colour, dimensions, and chemical composition. The most abundant MPs were composed of polyethylene, polyvinyl chloride, and polypropylene, with sizes ranging from 2 to 12 µm. MP data were statistically analysed in relation to specific patients’ data (age, use of personal care products containing plastic compounds, and consumption of fish/shellfish, beverages, and food in plastic packaging), but no significant relationship was found, suggesting that the ubiquitous MP presence makes human exposure inevitable.

Scientific Evidence about the Risks of Micro and Nanoplastics (MNPLs) to Human Health and Their Exposure Routes through the Environment

Nowadays, a large amount and variety of plastic is being produced and consumed by human beings on an enormous scale. Microplastics and nanoplastics (MNPLs) have become ubiquitous since they can be found in many ecosystem components. Plastic particles can be found in soil, water, and air. The routes of human exposure are numerous, mainly involving ingestion and inhalation. Once ingested, these particles interact with the gastrointestinal tract and digestive fluids. They can adsorb substances such as additives, heavy metals, proteins, or even microorganisms on their surface, which can cause toxicity. During inhalation, they can be inhaled according to their respective sizes. Studies have reported that exposure to MNPLs can cause damage to the respiratory tract, creating problems such as bronchitis, asthma, fibrosis, and pneumothorax. The reports of boards and committees indicate that there is little data published and available on the toxicity of MNPLs as well as the exposure levels in humans. Despite the well-established concept of MNPLs, their characteristics, and presence in the environment, little is known about their real effects on human health and the environment.

Effects of polystyrene nanoplastics on endothelium senescence and its underlying mechanism

Global plastic use has increased rapidly, and environmental pollution associated with nanoplastics (NPs) has been a growing concern recently. However, the impact and biological mechanism of NPs on the cardiovascular system are not well characterized. This study aimed to assess the possibility that NPs exposure promotes premature endothelial cell (EC) senescence in porcine coronary artery ECs and, if so, to elucidate the underlying mechanism. Treatment of ECs with NPs promoted the acquisition of senescence markers, senescence-associated β-galactosidase activity, and p53, p21, and p16 protein expression, resulting in the inhibition of proliferation. In addition, NPs impaired endothelium-dependent vasorelaxation associated with decreased endothelial nitric oxide synthase (eNOS) expression. NPs enhanced reactive oxygen species formation in ECs, and increased oxidative stress levels were associated with the induction of NADPH oxidases expression, followed by the subsequent downregulation of Sirt1 expression. The characteristics of EC senescence and dysfunction caused by NPs are prevented by an antioxidant (N-acetylcysteine), an NADPH oxidase inhibitor (apocynin), and a Sirt1 activator (resveratrol). These findings indicate that NPs induced premature EC senescence, at least in part, through the redox-sensitive eNOS/Sirt1 signaling pathway. This study suggested the effects and underlying mechanism of NPs on the cardiovascular system, which may provide pharmacological targets to prevent NPs-associated cardiovascular diseases.

Biotechnological potentials of halophilic microorganisms and their impact on mankind

Background

Halophiles are extremophilic organisms represented by archaea, bacteria and eukaryotes that thrive in hypersaline environment. They apply different osmoadaptation strategies to survive in hostile conditions. Habitat diversity of halophilic microorganisms in hypersaline system provides information pertaining the evolution of life on Earth.

Main body

The microbiome-gut-brain axis interaction contributes greatly to the neurodegenerative diseases. Gut resident halophilic bacteria are used as alternative medication for chronic brain diseases. Halophiles can be used in pharmaceuticals, drug delivery, agriculture, saline waste water treatment, biodegradable plastic production, metal recovery, biofuel energy generation, concrete crack repair and other sectors. Furthermore, versatile biomolecules, mainly enzymes characterized by broad range of pH and thermostability, are suitable candidate for industrial purposes. Reflectance pattern of halophilic archaeal pigment rhodopsin is considered as potential biosignature for Earth-like planets.

Short conclusions

This review represents important osmoadaptation strategies acquired by halophilic archaea and bacteria and their potential biotechnological applications to resolve present day challenges.

Graphical Abstract

Nanosafety: An Evolving Concept to Bring the Safest Possible Nanomaterials to Society and Environment

The use of nanomaterials has been increasing in recent times, and they are widely used in industries such as cosmetics, drugs, food, water treatment, and agriculture. The rapid development of new nanomaterials demands a set of approaches to evaluate the potential toxicity and risks related to them. In this regard, nanosafety has been using and adapting already existing methods (toxicological approach), but the unique characteristics of nanomaterials demand new approaches (nanotoxicology) to fully understand the potential toxicity, immunotoxicity, and (epi)genotoxicity. In addition, new technologies, such as organs-on-chips and sophisticated sensors, are under development and/or adaptation. All the information generated is used to develop new in silico approaches trying to predict the potential effects of newly developed materials. The overall evaluation of nanomaterials from their production to their final disposal chain is completed using the life cycle assessment (LCA), which is becoming an important element of nanosafety considering sustainability and environmental impact. In this review, we give an overview of all these elements of nanosafety.

A gold nanoparticle doped flexible substrate for microplastics SERS detection

Due to overuse of plastic products, decomposed microplastics (MPs) are widely spread in aquatic ecosystems, and will cause irreparable harm to the human body through the food chain. Traditional MP detection methods require cumbersome sample pre-processing procedures and complex instruments, so there is an urgent demand to develop methods to achieve simple on-site detection. Herein, a simple, sensitive, accurate, and stable MP detection method based on surface-enhanced Raman scattering (SERS) is investigated. Considering the hydrophobic problems of MPs, gold nanoparticle (AuNP) doped filter paper as a flexible SERS substrate is applied to capture MPs in the fiber pores. Benefitting from the electromagnetic (EM) hot spots generated by AuNPs, the Raman signal of MPs can be effectively enhanced. Meanwhile, the flexible SERS substrate has good sensitivity to a minimum detectable concentration of 0.1 g L^-1 for polyethylene terephthalate (PET) in water, and the maximum enhancement factor (EF) can reach 360.5. Furthermore, the practicability of the developed method has been proved by the successful detection of MPs in tap water and pond water. This research provides an easy process, high sensitivity, and good reproducibility method for MP detection.

Microplastic Pollution Focused on Sources, Distribution, Contaminant Interactions, Analytical Methods, and Wastewater Removal Strategies: A Review

Plastics have been one of the most useful materials in the world, due to their distinguishing characteristics: light weight, strength, flexibility, and good durability. In recent years, the growing consumption of plastics in industries and domestic applications has revealed a serious problem in plastic waste treatments. Pollution by microplastics has been recognized as a serious threat since it may contaminate all ecosystems, including oceans, terrestrial compartments, and the atmosphere. This micropollutant is spread in all types of environments and is serving as a "minor but efficient" vector for carrier contaminants such as pesticides, pharmaceuticals, metals, polychlorinated biphenyls (PCBs), and polycyclic aromatic hydrocarbons (PAHs). The need to deeply study and update the evolution of microplastic sources, toxicology, extraction and analysis, and behavior is imperative. This review presents an actual state of microplastics, addressing their presence in the environment, the toxicological effects and the need to understand their extent, their interactions with toxic pollutants, the problems that arise in the definition of analytical methods, and the possible alternatives of treatments.

Autofluorescence of Model Polyethylene Terephthalate Nanoplastics for Cell Interaction Studies

This work contributes to fill one of the gaps regarding nanoplastic interactions with biological systems by producing polyethylene terephthalate (PET) model nanoplastics, similar to those found in the marine environment, by means of a fast top-down approach based on mechanical fragmentation. Their size distribution and morphology were characterized by laser diffraction and atomic force microscopy (AFM). Their autofluorescence was studied by spectrofluorimetry and fluorescence imaging, being a key property for the evaluation of their interaction with biota. The emission spectra of label-free nanoplastics were comparable with those of PET nanoplastics labeled with Nile red. Finally, the suitability of label-free nanoplastics for biological studies was assessed by in vitro exposure with Mytilus galloprovincialis hemolymphatic cells in a time interval up to 6 h. The nanoplastic internalization into these cells, known to be provided with phagocytic activity, was assessed by fluorescence microscopy. The obtained results underlined that the autofluorescence of the model PET nanoplastics produced in the laboratory was adequate for biological studies having the potential to overcome the disadvantages commonly associated with several fluorescent dyes, such as the tendency to also stain other organic materials different from plastics, to form aggregates due to intermolecular interactions at high concentrations with a consequent decrease in fluorescence intensity, and to dye desorption from nanoparticles. The results of the autofluorescence study provide an innovative approach for plastic risk assessment.

Microplastics in the Deep: Comparing Dietary and Plastic Ingestion Data between Two Mediterranean Bathyal Opportunistic Feeder Species, Galeus melastomus, Rafinesque, 1810 and Coelorinchus caelorhincus (Risso, 1810), through Stomach Content Analysis

Marine plastic pollution is currently an issue of mounting concern around the world. Stomach content of marine fish has been increasingly used as a valid proxy for detecting the presence of such a pollutant in marine biota, both for coastal and deep-water environments. Although ingestion of microplastics has been reported in an increasing number of species, the patterns of ingestion still remain unclear, depending closely on the interaction between the species and types of microplastics involved. In this context, we analysed and compared the stomach contents of two bathyal dwelling opportunistic feeder species namely Galeus melastomus and Coelorinchus caelorhincus. In particular, we analysed microplastic items according to their dimension, morphology and colour, and diet’s variation with size obtained through prey identification. Both species showed a higher frequency of occurrence of the blue filament-like middle-sized microplastics (1.01–4.75 mm) compared with the other categories, although this pattern was much more marked in C. caelorhincus than in G. melastomus. The latter conversely showed a larger array of ingested plastic items in terms of shape and colour. Matching plastic ingestion with dietary data suggested potential predator confusion occurring in C. caelorhincus through active mis-selection of a defined type of microplastic instead of some particular family of polychaetes, which resemble in shape, size, and color to that type. Otherwise, G. melastomus appeared more prone to a random ingestion of a larger array of microplastic items because of a more generalistic and less selective feeding strategy. Although further validation is needed, stomach contents of the two species showed evidence strong enough to be considered as potential bioindicator species of microplastic pollution, as required by the Marine Strategy Framework Directive for monitoring this pollutant in the marine environment.

Occurrence of Microplastics in Tap and Bottled Water: Current Knowledge

A narrative review was carried out to describe the current knowledge related to the occurrence of MPs in drinking water. The reviewed studies (n = 21) showed the presence of microplastics (MPs) in tap (TW) and bottled (BW) water, increasing concerns for public health due to the possible toxicity associated with their polymeric composition, additives, and other compounds or microorganism adsorbed on their surface. The MP concentration increase by decreasing particles size and was higher in BW than in TW. Among BW, reusable PET and glass bottles showed a higher MP contamination than other packages. The lower MP abundance in TW than in natural sources indicates a high removal rate of MPs in drinking water treatment plants. This evidence should encourage the consumers to drink TW instead of BW, in order to limit their exposure to MPS and produce less plastic waste. The high variability in the results makes it difficult to compare the findings of different studies and build up a general hypothesis on human health risk. A globally shared protocol is needed to harmonize results also in view of the monitoring plans for the emerging contaminants, including MPs, introduced by the new European regulation.

Microplastics Risk into a Three-Link Food Chain Inside European Hake

Microplastics (MPs) are increasing in the marine environment as well as inside marine organisms, having an important effect on biological diversity. The trophic transfer of MPs was demonstrated under laboratory conditions, but this study is based on the analysis of preys found in stomach contents. MPs from Merluccius merluccius individuals caught in the Cantabrian Sea and preys inside their guts (blue whiting, and northern krill inside blue whiting) were analyzed. MPs with different chemical composition occurred inside every hake and their preys, with different damages, from aquatic life hazards with long lasting effects, to allergic skin reactions and respiratory irritation, not only for aquatic species and fishing resources, but also for humans through hake consumption. The similarity of MPs profiles from gills and seawater samples would support seawater as the main source of gill microplastics. The MPs profile of hake GIT was similar to that of hake preys inside. Despite the small sample size, the presence of MPs in all the tissues analyzed of hakes and their preys, together with the evidence of hazard compositions of some of them, highlights the need for policies and actions to reduce plastic and microplastic production and consumption.

OUP accepted manuscript

Healthy soil is foundational to human health. Healthy soil is needed to grow crops, provides food, and sustains populations. It supports diverse ecosystems and critical ecological services such as pollination. It stores water and prevents floods. It captures carbon and slows global climate change. Soil pollution is a great and growing threat to human health. Soil may be polluted by heavy metals, organic chemicals such as pesticides, biological pathogens, and micro/nanoplastic particles. Pollution reduces soil's ability to yield food. It results in food crop contamination and disease. Soil pollutants wash into rivers causing water pollution. Deforestation causes soil erosion, liberates sequestered pollutants, and generates airborne dust. Pollution of air, water, and soil is responsible for at least 9 million deaths each year. More than 60% of pollution-related disease and death is due to cardiovascular disease. Recognizing the importance of pollution to human health, the European Commission and the EU Action Plan for 2050: A Healthy Planet for All, have determined that air, water, and soil pollution must be reduced to levels that cause no harm to human or ecosystem health. We are thus required to create a toxic-free environment, respect the concept of a safe operating space for humanity, and sustain the health of our planet for future generations. This review article summarizes current knowledge of the links between soil health and human health and discusses the more important soil pollutants and their health effects.

Microbial nanocellulose biotextiles for a circular materials economy

The synthesis and bottom-up assembly of nanocellulose by microbes offers unique advantages to tune and meet key design criteria—rapid renewability, low toxicity, scalability, performance, and degradability—for multi-functional, circular economy textiles. However, development of green processing methods that meet these criteria remains a major research challenge. Here, we harness microbial biofabrication of nanocellulose and draw inspiration from ancient textile techniques to engineer sustainable biotextiles with a circular life cycle. The unique molecular self-organization of microbial nanocellulose (MC) combined with bio-phosphorylation with a lecithin treatment yields a compostable material with superior mechanical and flame-retardant properties. Specifically, treatment of MC with a lecithin-phosphocholine emulsion makes sites available to modulate cellulose cross-linking through hydroxyl, phosphate and methylene groups, increasing the interaction between cellulose chains. The resultant bioleather exhibits enhanced tensile strength and high ductility. Bio-phosphorylation with lecithin also redirects the combustion pathway from levoglucosan production towards the formation of foaming char as an insulating oxygen barrier, for outstanding flame retardance. Controlled color modulation is demonstrated with natural dyes. Life cycle impact assessment reveals that MC bioleather has up to an order of magnitude lower carbon footprint than conventional textiles, and a thousandfold reduction in the carcinogenic impact of leather production. Eliminating the use of hazardous substances, these high performance materials disrupt linear production models and strategically eliminate its toxicity and negative climate impacts, with widespread application in fashion, interiors and construction. Importantly, the biotextile approach developed in this study demonstrates the potential of biofabrication coupled with green chemistry for a circular materials economy.

Harnessing microbial biofabrication coupled to a protocol inspired by indigenous textile processes, we engineer high-performance biotextiles with a sustainable circular life cycle, including the plant and mineral dyed bioleather sneakers shown.