Surface and Interface Engineering for Nanocellulosic Advanced Materials

Nanocellulose for Sustainable Water Purification

Nanocelluloses (NC) are nature-based sustainable biomaterials, which not only possess cellulosic properties but also have the important hallmarks of nanomaterials, such as large surface area, versatile reactive sites or functionalities, and scaffolding stability to host inorganic nanoparticles. This class of nanomaterials offers new opportunities for a broad spectrum of applications for clean water production that were once thought impractical. This Review covers substantial discussions based on evaluative judgments of the recent literature and technical advancements in the fields of coagulation/flocculation, adsorption, photocatalysis, and membrane filtration for water decontamination through proper understanding of fundamental knowledge of NC, such as purity, crystallinity, surface chemistry and charge, suspension rheology, morphology, mechanical properties, and film stability. To supplement these, discussions on low-cost and scalable NC extraction, new characterizations including solution small-angle X-ray scattering evaluation, and structure-property relationships of NC are also reviewed. Identifying knowledge gaps and drawing perspectives could generate guidance to overcome uncertainties associated with the adaptation of NC-enabled water purification technologies. Furthermore, the topics of simultaneous removal of multipollutants disposal and proper handling of post/spent NC are discussed. We believe NC-enabled remediation nanomaterials can be integrated into a broad range of water treatments, greatly improving the cost-effectiveness and sustainability of water purification.

Cellulose or chitin nanofibril-stabilized latex for medical adhesion via tailoring colloidal interactions

The objective of this research is to develop a functional medical adhesive from natural nanofibril-stabilized latex through an aqueous process. Surface charged cellulose or chitin nanofibrils are used to form Pickering emulsions of acrylic monomers, followed by in situ polymerization. Charged initiators are selected to tailor the interactions between them and nanofibrils, and it is found that the repulsive electrostatic interactions play a key role in stabilizing the heterogeneous system. As a result, poly(2-ethylhexyl acrylate-co-methyl methacrylate) latexes are successfully prepared for surfactant-free adhesives with a high shear strength of 72.0 ± 6.5 kPa. In addition, drug can be easily incorporated in the nanopaper substrate or adhesive layer to form a medical tape, exhibiting long-term drug release and antibacterial behaviors. We managed developing a facile method to integrate green synthesis, versatile functionalities and excellent adhesion into one adhesive, which remains a great challenge.

Modulation of interfacial interactions toward strong and tough cellulose nanofiber-based transparent thin films with antifogging feature

Cross-linking is often performed to overcome the weak mechanical properties of native polymer films in order to expand their functional properties and applications. While this approach offers enhanced strength to the film, the film also suffers from low flexibility, low toughness and high brittleness. However, in view of the growing demand for strong and tough transparent thin films, this article reported our study to develop films made from cellulose nanofiber (CNF) via tailoring the interfacial bonding interactions through the application of glycerol (Gly) and glutaraldehyde (GA), which functioned as a plasticizer and cross-linking agent, respectively. Among the prepared films, the 10GA-8Gly-CNF film exhibited the best results with regard to the enhancement in the tensile strength (21.1%), Young's modulus (10.6%), elongation at break (100%) and toughness (32.7%), as compared to the native CNF film. Importantly, treating the surface of the film to radiofrequency oxygen plasma endowed the film with antifogging property, without compromising the optical clarity.

Multifunctional bacterial cellulose-based organohydrogels with long-term environmental stability

Sensitive strain sensors have attracted more attention due to their applications in health monitoring and human-computer interaction. However, the problems existing in conventional hydrogels, such as inherent brittleness, freezing at low temperature, low toughness, and water evaporation, have greatly hindered the practical applications. In order to solve the above problems, herein, we designed dual network multifunctionality organohydrogels using polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA) covalent cross-linking polymer as the first network, the bacterial celluloses (BCs) and calcium chloride by ligand binding as the second network. The prepared organohydrogels showed good conductivity and sensitivity over a wide temperature range (-20 ∼ 40 ℃), and maintained long-term stability (>15 days) in the air. In addition, the dynamic combination of BCs-Ca^{2 +} and hydrogen bonds in the binary system further endows the organohydrogels with excellent tensile strength (≈1.0 MPa), tensile strain (≈1300%), toughness (≈6.2 MJ m^-3), conductivity (3.4 S m^-1), gauge factor (≈1.24), adhesion (≈0.3 MPa), and self-healing properties (self-healing tensile strain to 632%). Therefore, this organohydrogel has potential candidates for flexible electronic skin, motion monitoring, and soft robotics.

Promoted formation of stereocomplex in enantiomeric poly(lactic acid)s induced by cellulose nanofibers

Stereocomplex (SC) crystallization between enantiomeric poly(_L-lactic acid) (PLLA) and poly(_D-lactic acid) (PDLA) is believed to yield poly(lactic acid) (PLA) with superior physiochemical properties. However, homocrystallization (HC) crystallites are inevitably generated in the PLLA/PDLA blends. Herein, we report a simple approach to fabricate PLLA/PDLA racemic blends with high contents of SC crystallites by introducing cellulose nanofibers (CNFs). The isothermal crystallization results revealed that the half-crystallization time of the PLLA/PDLA blend was significantly decreased by adding CNFs. Additionally, with the incorporation of 3 wt% modified CNFs, the PLLA/PDLA blend was overwhelmingly crystallized into SC crystallites with no HC crystallite formation. Based on Fourier transform infrared spectroscopy findings, it was speculated that the preferred SC crystallization of PLLA/PDLA/CNF was caused by enhanced interchain molecular interactions between CNFs and PLA. This work presents a feasible and efficient method to fabricate PLA with exclusively SC crystallites, which possesses great potential for producing high-performance PLA materials.

Cellulose Nanomaterials as a Future, Sustainable and Renewable Material

Cellulose nanomaterials (CNs) are renewable, bio-derived materials that can address not only technological challenges but also social impacts. This ability results from their unique properties, for example, high mechanical strength, high degree of crystallinity, biodegradable, tunable shape, size, and functional surface chemistry. This minireview provides chemical and physical features of cellulose nanomaterials and recent developments as an adsorbent and an antimicrobial material generated from bio-renewable sources.

Abdalla M, Bechelany M. Review on Natural, Incidental, Bioinspired, and Engineered Nanomaterials: History, Definitions, Classifications, Synthesis, Properties, Market, Toxicities, Risks, and Regulations

Nanomaterials are becoming important materials in several fields and industries thanks to their very reduced size and shape-related features. Scientists think that nanoparticles and nanostructured materials originated during the Big Bang process from meteorites leading to the formation of the universe and Earth. Since 1990, the term nanotechnology became very popular due to advances in imaging technologies that paved the way to specific industrial applications. Currently, nanoparticles and nanostructured materials are synthesized on a large scale and are indispensable for many industries. This fact fosters and supports research in biochemistry, biophysics, and biochemical engineering applications. Recently, nanotechnology has been combined with other sciences to fabricate new forms of nanomaterials that could be used, for instance, for diagnostic tools, drug delivery systems, energy generation/storage, environmental remediation as well as agriculture and food processing. In contrast with traditional materials, specific features can be integrated into nanoparticles, nanostructures, and nanosystems by simply modifying their scale, shape, and composition. This article first summarizes the history of nanomaterials and nanotechnology. Followed by the progress that led to improved synthesis processes to produce different nanoparticles and nanostructures characterized by specific features. The content finally presents various origins and sources of nanomaterials, synthesis strategies, their toxicity, risks, regulations, and self-aggregation.

Robust, Hyper-Permeable Nanomembrane Composites of Poly(dimethylsiloxane) and Cellulose Nanofibers

Robust, nanometer-thick, permselective membranes were developed by composite formation from poly(dimethylsiloxane) (PDMS) and cellulose nanofibers (CNF). Their unique behavior is discussed in relation to that of a single-component PDMS nanomembrane. In the absence of the CNF component, the PDMS nanomembrane with a thickness of 34 nm displays ultrahigh permeability of CO₂ gas, which is only ca. one order of magnitude smaller than that of free-flowing gases through a porous poly(acrylonitrile) support film (PAN, thickness 150 μm). The constant CO₂/N₂ selectivity observed for the whole range of membrane thickness (34 nm-10 μm) suggests that in the single-component membrane, the kinetic process at the membrane surface determines the permselective behavior. Multilayered composite membranes are obtainable by repeated spin coating. The mechanical weakness of the single-component PDMS membrane is improved by complexation with CNF, as confirmed by the bulge test and the ease of macroscopic handling. Such a robust PDMS-CNF nanomembrane gives superior permeation of 50,000 GPU with a defect-free PDMS layer of ca. 17 nm thickness. Interestingly, the permeation characteristics of the composite membrane are strongly affected by the asymmetric arrangement of PDMS and CNF layers, and the gas permeation from the side of the CNF layer is drastically reduced. The PDMS composite membrane is expected to provide practically useful systems as a means of direct air capture.

Electrospray Deposition of Cellulose Nanofibers on Paper: Overcoming the Limitations of Conventional Coating

While the potential of cellulose nanofibers to enhance the mechanical and barrier properties of paper is well-known, there are many uncertainties with respect to how to apply them. In this study, we use not only bulk addition of micro-/nanofibers and bar coating with oxidized nanofibers, but also a combination of these and, as a novel element, electrospray deposition of nanofiber dispersions. Characterization involved testing the strength of uncoated and coated paper sheets, their resistance to air flow, their Bendtsen roughness, and their apparent density, plus visualization of their surface and cross-sections by scanning electron microscopy. As expected, bulk addition to the unrefined pulp was sufficient to attain substantial strengthening, but this enhancement was limited to approximately 124%. Following this, surface addition by bar coating improved air resistance, but not strength, since, as applying nanocellulose at high consistency was technically unfeasible, this was performed several times with detrimental drying stages in between. However, replacing bar coating with electrospraying helped us overcome these apparent limitations, producing enhancements in both barrier and tensile properties. It is concluded that electrosprayed nanofibers, owing to their uniform deposition and favorable interactions, operate as an effective binder between fibers (and/or fines).

Inherently Conductive Poly(dimethylsiloxane) Elastomers Synergistically Mediated by Nanocellulose/Carbon Nanotube Nanohybrids toward Highly Sensitive, Stretchable, and Durable Strain Sensors

With the rapid development of soft electronics, flexible and stretchable strain sensors are highly desirable. However, coupling of high sensitivity and stretchability in a single strain sensor remains a challenge. Herein, a kind of conductive elastomer is constructed with poly(dimethylsiloxane) (PDMS) and silylated cellulose nanocrystal (SCNC)/carbon nanotube (CNT) nanohybrids through a facile one-pot solution-casting method. The hydrophobic SCNCs can effectively facilitate the dispersion of CNTs in PDMS and synergistically improve the interfacial compatibility between CNTs and the PDMS matrix, resulting in favorable stress and electron transfer in the polymer network. Due to the outstanding electrical conductivity of CNTs and the excellent dispersity and high mechanical performance of SCNCs, combined with the good compatibility between SCNC-mediated carbon nanotubes (SCNC-CNTs) and PDMS, the resulting composite elastomer (SCNC-CNT/PDMS) shows high electrical conductivity (∼2.77 S m^-1), tensile strength (∼5.72 MPa), and fatigue resistance properties. The strain sensor assembled by SCNC-CNT/PDMS demonstrates a high strain range above 100%, appealing strain sensitivity with a gauge factor of 37.11 at 50-100% strain, and long-term stability and durability, which is capable of monitoring both real-time human motions and acoustic vibrations. This work paves a new way for the design and controllable preparation of flexible and stretchable conductive elastomers, demonstrating promising applications in wearable devices and intelligent electronics.

Engineering Self-Adhesive Polyzwitterionic Hydrogel Electrolytes for Flexible Zinc-Ion Hybrid Capacitors with Superior Low-Temperature Adaptability

Flexible zinc-ion hybrid capacitors (ZIHCs) based on hydrogel electrolytes are an up-and-coming and highly promising candidate for potential large-scale energy storage due to their combined complementary advantages of zinc batteries and capacitors. However, the freezing induces a sharp drop in conductivity and mechanical property with tremendous compromise of the interfacial adhesion, thereby severely impeding the low-temperature application of such flexible ZIHCs. To achieve the flexible ZIHCs with excellent low-temperature adaptability, an antifreezing and self-adhesive polyzwitterionic hydrogel electrolyte (PZHE) is engineered via a self-catalytic nano-reinforced strategy, affording unparalleled conductivity and robust interfacial adhesion, together with superhigh mechanical strength over a broad temperature ranging from 25 to -60 °C. Meanwhile, the water-in-salt-type PZHE filled with ZnCl₂ can provide ion migration channels to enhance the reversibility of Zn metal electrodes, thus greatly reducing side reactions and extending the cycling life. With distinctive integrated merits of the water-in-salt type PZHE, the as-built ZIHCs deliver a high-level energy density of 80.5 Wh kg^-1, a desired specific capacity of 81.5 mAh g^-1, along with a long-duration cycling lifespan (100 000 cycles) with 84.6% capacity retention at -40 °C, even outperforming the state-of-the-art ZIHCs at room temperature. More encouragingly, the extraordinary temperature-adaptability for both electrochemical and mechanical performance under severe mechanical challenges is achieved for the flexible ZIHCs at extremely low temperature. Noticeably, the ZIHC is also capable of operating in an ice-water bath and vacuum. It is believed that this strategy makes contributions to inspire the design and application of high-performance PZHEs in fields of flexible and wearable electronics that can work in extremely cold environments.

Plant Cellulose Nanofiber-Derived Structural Material with High-Density Reversible Interaction Networks for Plastic Substitute

Ubiquitous petrochemical-based plastics pose a potential threat to ecosystems. In response, bioderived and degradable polymeric materials are being developed, but their mechanical and thermal properties cannot compete with those of existing petrochemical-based plastics, especially those used as structural materials. Herein, we report a biodegradable plant cellulose nanofiber (CNF)-derived polymeric structural material with high-density reversible interaction networks between nanofibers, exhibiting mechanical and thermal properties better than those of existing petrochemical-based plastics. This all-green material has substantially improved flexural strength (∼300 MPa) and modulus (∼16 GPa) compared with those of existing petrochemical-based plastics. Its average thermal expansion coefficient is only 7 × 10^-6 K^-1, which is more than 10 times lower than those of petrochemical-based plastics, indicating its dimension is almost unchanged when heated, and thus, it has a thermal dimensional stability that is better than those of plastics. As a fully bioderived and degradable material, the all-green material offers a more sustainable high-performance alternative to petrochemical-based plastics.

Self-Recovery, Fatigue-Resistant, and Multifunctional Sensor Assembled by a Nanocellulose/Carbon Nanotube Nanocomplex-Mediated Hydrogel

Flexible sensors have attracted great research interest due to their applications in artificial intelligence, wearable electronics, and personal health management. However, due to the inherent brittleness of common hydrogels, preparing a hydrogel-based sensor integrated with excellent flexibility, self-recovery, and antifatigue properties still remains a challenge to date. In this study, a type of physically and chemically dual-cross-linked conductive hydrogels based on 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO)-oxidized cellulose nanofiber (TOCN)-carrying carbon nanotubes (CNTs) and polyacrylamide (PAAM) matrix via a facial one-pot free-radical polymerization is developed for multifunctional wearable sensing application. Inside the hierarchical gel network, TOCNs not only serve as the nanoreinforcement with a toughening effect but also efficiently assist the homogeneous distribution of CNTs in the hydrogel matrix. The optimized TOCN-CNT/PAAM hydrogel integrates high compressive (∼2.55 MPa at 60% strain) and tensile (∼0.15 MPa) strength, excellent intrinsic self-recovery property (recovery efficiency >92%), and antifatigue capacity under both cyclic stretching and pressing. The multifunctional sensors assembled by the hydrogel exhibit both high strain sensitivity (gauge factor ≈11.8 at 100-200% strain) and good pressure sensing ability over a large pressure range (0-140 kPa), which can effectively detect the subtle and large-scale human motions through repeatable and stable electrical signals even after 100 loading-unloading cycles. The comprehensive performance of the TOCN-CNT/PAAM hydrogel-based sensor is superior to those of most gel-based sensors previously reported, indicating its potential applications in multifunctional sensing devices for healthcare systems and human motion monitoring.

Lightweight, strong, moldable wood via cell wall engineering as a sustainable structural material

[Figure: see text].

Engineering cellulose nanopaper with water resistant, antibacterial, and improved barrier properties by impregnation of chitosan and the followed halogenation

This work demonstrated a facile and sustainable approach to functionalize cellulose nanopaper (CNP) by impregnation of chitosan (CS) and the followed halogenation. It was found that the tensile strength of the functionalized CNP (CNP/CS-Cl) was enhanced by 38.3% and 512.6% at dry and wet conditions, respectively. Meanwhile, the total transmittance (at 550 nm) of CNP/CS-Cl was increased from 75% of pure CNP to 85%, with 35% decrease in optical haze. Moreover, the CNP/CS-Cl exhibited significant enhancement in barrier properties. Importantly, part of the amino groups on CS were transformed into N-halamines during the halogenation process, which endowed the CNP/CS-Cl with excellent antibacterial performance against both S. aureus and E. coli with 100% bacterial reduction after 10 min of contact. Thus, this work provides a simple and efficient approach to functionalize CNP with water resistance, high transparency, excellent antibacterial and barrier properties, which will expand the potential applications of CNP.

Nanocellulose Based Filtration Membrane in Industrial Waste Water Treatment: A Review

In the field of industrial wastewater treatment, membrane separation technology, as an emerging separation technology, compared with traditional separation technology such as precipitation, adsorption, and ion exchange, has advantages in separation efficiency, low energy consumption, low cost, simple operation, and no secondary pollution. The application has been expanding in recent years, but membrane fouling and other problems have seriously restricted the development of membrane technology. Natural cellulose is one of the most abundant resources in nature. In addition, nanocellulose has characteristics of high strength and specific surface area, surface activity groups, as well as being pollution-free and renewable, giving it a very wide development prospect in many fields, including membrane separation technology. This paper reviews the current status of nanocellulose filtration membrane, combs the widespread types of nanocellulose and its derivatives, and summarizes the current application of cellulose in membrane separation. In addition, for the purpose of nanocellulose filtration membrane in wastewater treatment, nanocellulose membranes are divided into two categories according to the role in filtration membrane: the application of nanocellulose as membrane matrix material and as a modified additive in composite membrane in wastewater treatment. Finally, the advantages and disadvantages of inorganic ceramic filtrations and nanocellulose filtrations are compared, and the application trend of nanocellulose in the filtration membrane direction is summarized and discussed.

A multifunctional nanocellulose-based hydrogel for strain sensing and self-powering applications

Ionic conductive hydrogel with multifunctional properties have shown promising application potential in various fields, including electronic skin, wearable devices and sensors. Herein, a highly stretchable (up to 2800% strain), tough, adhesive ionic conductive hydrogel are prepared using cationic nanocellulose (CCNC) to disperse/stabilize graphitic carbon nitride (g-C₃N₄), forming CCNC-g-C₃N₄ complexes and in situ radical polymerization process. The ionic interactions between CNCC and g-C₃N₄ acted as sacrificial bonds enabled highly stretchability of the hydrogel. The hydrogel showed high sensitivity (gauge factor≈5.6, 0-1.6% strain), enabling the detection of human body motion, speech and exhalation. Furthermore, the hydrogel based self-powered device can charge 2.2 μF capacitor up to 15 V from human motion. This multifunctional hydrogel presents potential applications in self-powered wearable electronics.

Self-Healing, Self-Adhesive Silk Fibroin Conductive Hydrogel as a Flexible Strain Sensor

Flexible and wearable hydrogel strain sensors have attracted tremendous attention for applications in human motion and physiological signal monitoring. However, it is still a great challenge to develop a hydrogel strain sensor with certain mechanical properties and tensile deformation capabilities, which can be in conformal contact with the target organ and also have self-healing properties, self-adhesive capability, biocompatibility, antibacterial properties, high strain sensitivity, and stable electrical performance. In this paper, an ionic conductive hydrogel (named PBST) is rationally designed by proportionally mixing polyvinyl alcohol (PVA), borax, silk fibroin (SF), and tannic acid (TA). SF can not only be a reinforcement to introduce an energy dissipation mechanism into the dynamically cross-linked hydrogel network to stabilize the non-Newtonian behavior of PVA and borax but it can also act as a cross-linking agent to combine with TA to reduce the dissociation of TA on the hydrogel network, improving the mechanical properties and viscoelasticity of the hydrogel. The combination of SF and TA can improve the self-healing ability of the hydrogel and realize the adjustable viscoelasticity of the hydrogel without sacrificing other properties. The obtained hydrogel has excellent stretchability (strain > 1000%) and shows good conformal contact with human skin. When the hydrogel is damaged by external strain, it can rapidly self-repair (mechanical and electrical properties) without external stimuli. It shows adhesiveness and repeatable adhesiveness to different materials (steel, wood, PTFE, glass, iron, and cotton fabric) and biological tissues (pigskin) and is easy to peel off without residue. The obtained PBST conductive hydrogel also has a wide strain-sensing range (>650%) and reliable stability. The hydrogel adhered to the skin surface can monitor large strain movements such as in finger joints, wrist joints, knee joints, and so on and detect swallowing, smiling, facial bulging and calming, and other micro-deformation behaviors. It can also distinguish physical signals such as light smile, big laugh, fast and slow breathing, and deep and shallow breathing. Therefore, the PBST conductive hydrogel material with multiple synergistic functions has great potential as a flexible wearable strain sensor. The PBST hydrogel has antibacterial properties and good biocompatibility at the same time, which provides a safety guarantee for it as a flexible wearable strain sensor. This work is expected to provide a new way for people to develop ideal wearable strain sensors.

Preparation of self-healing hydrogel toward improving electromagnetic interference shielding and energy efficiency

In this study, a self-healing hydrogel was prepared that is transparent to visible (Vis) light while absorbing ultraviolet (UV), infrared (IR), and microwave. The optothermal features of the hydrogel were explored by monitoring temperature using an IR thermometer under an IR source. The hydrogel was synthesized using sodium tetraborate decahydrate (borax) and polyvinyl alcohol (PVA) as raw materials based on a facile thermal route. More significantly, graphene oxide (GO) and graphite-like carbon nitride (g-C3N4) nanostructures as well as carbon microsphere (CMS) were applied as guests to more dissect their influence on the microwave and optical characteristics. The morphology of the fillers was evaluated using field emission scanning electron microscopy (FE-SEM). Fourier transform infrared (FTIR) attested that the chemical functional groups of the hydrogel have been formed and the result of diffuse reflection spectroscopy (DRS) confirmed that the hydrogel absorbs UV while is transparent in Vis light. The achieved result implied that the hydrogel acts as an essential IR absorber due to its functional groups desirable for energy efficiency and harvesting. Interestingly, the achieved results have testified that the self-healing hydrogels had the proper self-healing efficiency and self-healing time. Eventually, microwave absorbing properties and shielding efficiency of the hydrogel, hydrogel/GO, g-C3N4, or CMS were investigated, demonstrating the salient microwave characteristics, originated from the established ionic conductive networks and dipole polarizations. The efficient bandwidth of the hydrogel was as wide as 3.5 GHz with a thickness of 0.65 mm meanwhile its maximum reflection loss was 75.10 dB at 14.50 GHz with 4.55 mm in thickness. Particularly, the hydrogel illustrated total shielding efficiency (SET) > 10 dB from 1.19 to 18 and > 20 dB from 4.37 to 18 GHz with 10.00 mm in thickness. The results open new windows toward improving the shielding and energy efficiency using practical ways.

Recent Advances in Design and Fabrication of Nanocomposites for Electromagnetic Wave Shielding and Absorbing

Electromagnetic (EM) pollution has raised significant concerns to human health with the rapid development of electronic devices and wireless information technologies, and created adverse effects on the normal operation of the sensitive electronic apparatus. Notably, the EM absorbers with either dielectric loss or magnetic loss can hardly perform efficient absorption, which thereby limits their applications in the coming 5G era. In such a context, the hotspot materials reported recently, such as graphene, MXenes, and metal-organic frameworks (MOF)-derived materials, etc., have been explored and applied as EM absorbing and shielding materials owing to their tunable heterostructures, as well as the facile incorporation of both dielectric and magnetic components. In this review, we deliver a comprehensive literature survey according to the types of EM absorbing and shielding materials, and interpret the connectivity and regularity among them on the basis of absorbing mechanisms and microstructures. Finally, the challenges and the future prospects of the EM dissipating materials are also discussed accordingly.

Cellulose-based special wetting materials for oil/water separation: A review

Oil spill accidents and oily wastewater discharged by petrochemical industries have severely wasted water resources and damaged the environment. The use of special wetting materials to separate oil and water is efficient and environment-friendly. Cellulose is the most abundant renewable resource and has natural advantages in removing pollutants from oily wastewater. The application and modification of cellulose as special wetting materials have attracted considerable research attention. Therefore, we summarized cellulose-based superlipophilic/superhydrophobic and superhydrophilic/superoleophobic materials exhibiting special wetting properties for oil/water separation. The treatment mechanism, preparation technology, treatment effect, and representative projects of oil-bearing wastewater are discussed. Moreover, cellulose-based intelligent-responsive materials for application to oil/water separation and the removal of other pollutants from oily wastewater have also been summarized. The prospects and potential challenges of all the materials have been highlighted.

Recent Progress on the Characterization of Cellulose Nanomaterials by Nanoscale Infrared Spectroscopy

Researches of cellulose nanomaterials have seen nearly exponential growth over the past several decades for versatile applications. The characterization of nanostructural arrangement and local chemical distribution is critical to understand their role when developing cellulose materials. However, with the development of current characterization methods, the simultaneous morphological and chemical characterization of cellulose materials at nanoscale resolution is still challenging. Two fundamentally different nanoscale infrared spectroscopic techniques, namely atomic force microscope based infrared spectroscopy (AFM-IR) and infrared scattering scanning near field optical microscopy (IR s-SNOM), have been established by the integration of AFM with IR spectroscopy to realize nanoscale spatially resolved imaging for both morphological and chemical information. This review aims to summarize and highlight the recent developments in the applications of current state-of-the-art nanoscale IR spectroscopy and imaging to cellulose materials. It briefly outlines the basic principles of AFM-IR and IR s-SNOM, as well as their advantages and limitations to characterize cellulose materials. The uses of AFM-IR and IR s-SNOM for the understanding and development of cellulose materials, including cellulose nanomaterials, cellulose nanocomposites, and plant cell walls, are extensively summarized and discussed. The prospects of future developments in cellulose materials characterization are provided in the final part.

Enzymatic Preparation and Characterization of Spherical Microparticles Composed of Artificial Lignin and TEMPO-Oxidized Cellulose Nanofiber

A one-pot and one-step enzymatic synthesis of submicron-order spherical microparticles composed of dehydrogenative polymers (DHPs) of coniferyl alcohol as a typical lignin precursor and TEMPO-oxidized cellulose nanofibers (TOCNFs) was investigated. Horseradish peroxidase enzymatically catalyzed the radical coupling of coniferyl alcohol in an aqueous suspension of TOCNFs, resulting in the formation of spherical microparticles with a diameter and sphericity index of approximately 0.8 μm and 0.95, respectively. The ζ-potential of TOCNF-functionalized DHP microspheres was about -40 mV, indicating that the colloidal systems had good stability. Nanofibrous components were clearly observed on the microparticle surface by scanning electron microscopy, while some TOCNFs were confirmed to be inside the microparticles by confocal laser scanning microscopy with Calcofluor white staining. As both cellulose and lignin are natural polymers known to biodegrade, even in the sea, these woody TOCNF-DHP microparticle nanocomposites were expected to be promising alternatives to fossil resource-derived microbeads in cosmetic applications.

Integrated Conductive Hybrid Electrode Materials Based on PPy@ZIF-67-Derived Oxyhydroxide@CFs Composites for Energy Storage

Due to excellent flexibility and hydrophilicity, cellulose fibers (CFs) have become one of the most potential substrate materials in flexible and wearable electronics. In previous work, we prepared cobalt oxyhydroxide with crystal defects modified polypyrrole (PPy)@CFs composites with good electrochemical performance. In this work, we redesigned the crystalline and nanoscale cobalt oxyhydroxide with zeolitic imidazolate frameworks-67 (ZIF-67) as precursor. The results showed that the PPy@ZIF-67 derived cobalt oxyhydroxide@CFs (PZCC) hybrid electrode materials possess far better capacitance of 696.65 F·g⁻¹ than those of PPy@CFs (308.75 F·g⁻¹) and previous PPy@cobalt oxyhydroxide@CFs (571.3 F·g⁻¹) at a current density of 0.2 A·g⁻¹. The PZCC delivers an excellent cyclic stability (capacitance retention of 92.56%). Moreover, the PZCC-supercapacitors (SCs) can provide an energy density of 45.51 mWh cm⁻³ at a power density of 174.67 mWh·cm⁻³, suggesting the potential application in energy storage area.

Molecular Dynamics Simulation of Nanocellulose-Stabilized Pickering Emulsions

While the economy is rapidly expanding in most emerging countries, issues coupled with a higher population has created foreseeable tension among food, water, and energy. It is crucial for more sustainable valorization of resources, for instance, nanocellulose, to address the core challenges in environmental sustainability. As the complexity of the system evolved, the timescale of project development has increased exponentially. However, research on the design and operation of integrated nanomaterials, along with energy supply, monitoring, and control infrastructure, has seriously lagged. The development cost of new materials can be significantly reduced by utilizing molecular simulation technology in the design of nanostructured materials. To realize its potential, nanocellulose, an amphiphilic biopolymer with the presence of rich -OH and -CH structural groups, was investigated via molecular dynamics simulation to reveal its full potential as Pickering emulsion stabilizer at the molecular level. This work has successfully quantified the Pickering stabilization mechanism profiles by nanocellulose, and the phenomenon could be visualized in three stages, namely the initial homogenous phase, rapid formation of micelles and coalescence, and lastly the thermodynamic equilibrium of the system. It was also observed that the high bead order was always coupled with a high volume of phase separation activities, through a coarse-grained model within 20,000 time steps. The outcome of this work would be helpful to provide an important perspective for the future design and development of nanocellulose-based emulsion products, which cater for food, cosmeceutical, and pharmaceutical industries.

Robust versatile nanocellulose/polyvinyl alcohol/carbon dot hydrogels for biomechanical sensing

A new type of nanocellulose/poly(vinyl alcohol)/carbon dot (NPC) multifunctional hydrogel was successfully fabricated by an one-step in-situ hydrothermal method. The one-pot strategy led to the formation of a complex hydrogen bonding/dynamic boric acid ester/nitrogen-doped carbon dots network, and endowed the hydrogel with multifunctionality. The hydrogel underwent self-healing at room temperature (25 °C) and exhibited double-emission fluorescence and high mechanical strength (tensile strength of up to 2.98 MPa). An NPC hydrogel-based capacitive sensor exhibited remarkable linear capacitance responsiveness toward pressure, strain, and glucose concentration, and enabled real-time synchronous quantitative pressure/glucose sensing with multiple linear correlations, which was a key performance criteria for biomechanical sensors. The versatility and multiple advantages of the as-prepared hydrogel demonstrate the potential of biological-mechanical sensing materials using natural cellulosic biomass.

Tannic Acid-Silver Dual Catalysis Induced Rapid Polymerization of Conductive Hydrogel Sensors with Excellent Stretchability, Self-Adhesion, and Strain-Sensitivity Properties

The application of conductive hydrogels in intelligent biomimetic electronics is a hot topic in recent years, but it is still a great challenge to develop the conductive hydrogels through a rapid fabrication process at ambient temperature. In this work, a versatile poly(acrylamide) @cellulose nanocrystal/tannic acid-silver nanocomposite (NC) hydrogel integrated with excellent stretchability, repeatable self-adhesion, high strain sensitivity, and antibacterial property, was synthesized via radical polymerization within 30 s at ambient temperature. Notably, this rapid polymerization was realized through a tannic acid-silver (TA-Ag) mediated dynamic catalysis system that was capable of activating ammonium persulfate and then initiated the free-radical polymerization of the acrylamide monomer. Benefiting from the incorporation of TA-Ag metal ion nanocomplexes and cellulose nanocrystals, which acted as dynamic connecting bridges by hydrogen bonds to efficiently dissipate energy, the obtained NC hydrogels exhibited prominent tensile strain (up to 4000%), flexibility, self-recovery, and antifatigue properties. In addition, the hydrogels showed repeatable adhesiveness to different substrates (e.g., glass, wood, bone, metal, and skin) and significant antibacterial properties, which were merits for the hydrogels to be assembled into a flexible epidermal sensor for long-term human-machine interfacial contact without concerns about the use of external adhesive tapes and bacterial breeding. Moreover, the remarkable conductivity (σ ∼ 5.6 ms cm^-1) and strain sensitivity (gauge factor = 1.02) allowed the flexible epidermal sensors to monitor various human motions in real time, including huge movement of deformations (e.g., wrist, elbow, neck, shoulder) and subtle motions. It is envisioned that this work would provide a promising strategy for the rapid preparation of conductive hydrogels in the application of flexible electronic skin, biomedical devices, and soft robotics.

Optimized Loading of Carboxymethyl Cellulose (CMC) in Tri-component Electrospun Nanofibers Having Uniform Morphology

Cellulose is one of the most hydrophilic polymers with sufficient water holding capacity but it is unstable in aqueous conditions and it swells. Cellulose itself is not suitable for electrospun nanofibers' formation due to high swelling, viscosity, and lower conductivity. Carboxymethyl cellulose (CMC) is also super hydrophilic polymer, however it has the same trend for nanofibers formation as that of cellulose. Due to the above-stated reasons, applications of CMC are quite limited in nanotechnology. In recent research, loading of CMC was optimized for electrospun tri-component polyvinyl alcohol (PVA), polyvinylpyrrolidone (PVP), and carboxymethyl cellulose (CMC) nanofibers aim at widening its area of applications. PVA is a water-soluble polymer with a wide range of applications in water filtration, biomedical, and environmental engineering, and with the advantage of easy process ability. However, it was observed that only PVA was not sufficient to produce PVA/CMC nanofibers via electrospinning. To increase spinnability of PVA/CMC nanofibers, PVP was selected as the best available option because of its higher conductivity and water solubility. Weight ratios of CMC and PVP were optimized to produce uniform nanofibers with continuous production as well. It was observed that at a weight ratio of PVP 12 and CMC 3 was at the highest possible loading to produce smooth nanofibers.