Investigating binding characteristics of cadmium and copper to DOM derived from compost and rice straw using EEM-PARAFAC combined with two-dimensional FTIR correlation analyses

UV-based advanced oxidation of dissolved organic matter in reverse osmosis concentrate from a potable water reuse facility: A Parallel-Factor (PARAFAC) analysis approach

Disposal of reverse osmosis concentrate (ROC) from advanced water purification facilities is a challenge associated with the implementation of reverse osmosis-based treatment of municipal wastewater effluent for potable reuse. In particular, the dissolved organic matter (DOM) present in ROC diminishes the quality of the receiving water upon environmental disposal and affects the toxicity, fate, and transport of organic contaminants. This study investigates UV-based advanced oxidation processes (UV-AOPs) for treating DOM in ROC using a Parallel Factor Analysis (PARAFAC) approach. DOM composition and degradation were tested in UV-only and three UV-AOPs using hydrogen peroxide (H₂O₂), free chlorine (Cl₂), and persulfate (S₂O₈^2-). The four-component PARAFAC model consisted of two terrestrial humic-like components (C_UVH and C_VisH), a wastewater/nutrient tracer component (C_NuTr), and a protein-like (tyrosine-like) component (C_PrTy). Based on the observed loss in the maximum fluorescence intensity of the components, DOM degradation was determined to be dependent on UV fluence, oxidant dose, and dilution factor of the ROC (i.e., bulk DOM concentration). C_VisH was most the photolabile component in the UV-only system, followed by C_NuTr, C_PrTy, and C_UVH, respectively. Furthermore, UV-H₂O₂ and UV-S₂O₈^2- displayed faster overall reaction kinetics compared to UV-Cl₂. The degradation trends suggested that C_NuTr and C_PrTy consisted of chemical moieties that were susceptible to reactive oxygen species (HO^•) but not reactive chlorine species; whereas, C_VisH was sensitive to all reactive species generated in the three UV-AOPs. Compared to other components, C_PrTy was recalcitrant in all treatment scenarios tested. Calculations using chemical probe-based analysis also confirmed these trends in the reactivity of DOM components. The outcomes of this study form a foundation for characterizing ROC reactivity in UV-AOP treatment technologies, to ultimately improve the sustainability of water reuse systems.

Effect of soil characteristics on cadmium absorption and plant growth of Theobroma cacao L. seedlings

BACKGROUND

Cadmium uptake by cacao plants can affect plant growth, consumer health and commercialisation. To develop mitigation strategies, it is essential to identify the soil characteristics that could influence this absorption. To determine the relationships between cadmium absorption and the soil characteristics of cacao areas, the responses at concentrations of 0, 2, 5, 10 and 20 μg g^-1 of cadmium in three soils of these areas and an andisol were evaluated, using 120-day-old seedlings of four cultivars of Theobroma cacao L.

RESULTS

In the present study, several relationships were found between chemical and physical soil characteristics and available cadmium, such as real and bulk densities, as well as contents of iron, sand, magnesium, potassium, sodium and copper. Additionally, moderate to strong correlations between potassium (r²  = -0.56) and real density (r²  = 0.42), with foliar cadmium, were found. Moreover, a differential deleterious effect on cacao growth in variables such as biomass was corroborated in cadmium concentrations from 5 μg g^-1 in soils. There were no statistical differences between cultivars with respect to cadmium uptake or plant growth. Finally, a multiple linear regression model is proposed to estimate the foliar cadmium content (r²  = 0.878).

CONCLUSION

Some soil characteristics such as density, as well as sand, clay, aluminium, potassium and iron contents, should be considered before establishing cacao crops to avoid cadmium accumulation. The correlation between potassium with foliar cadmium indicated that potassium could be significant in cadmium uptake mitigation strategies. The high correlation between available cadmium and foliar cadmium indicates that the quantification methodology developed using ethylenediaminetetraacetic acid extractant may be a useful diagnostic tool. © 2021 Society of Chemical Industry.

Novel Insights into the Molecular-Level Mechanism Linking the Chemical Diversity and Copper Binding Heterogeneity of Biochar-Derived Dissolved Black Carbon and Dissolved Organic Matter

Biochar-derived dissolved black carbon (DBC) varies in chemical composition and significantly affects the environmental fate of metal ions. However, the intrinsic molecular composition of DBC fractions and their molecular interaction mechanisms with metal ions remain unclear. We propose a novel, molecular-level covariant binding mechanism to comparatively interpret the heterogeneities, active sites, and sequential responses of copper binding with molecular compounds in DBC and natural dissolved organic matter (DOM). Relatively large proportions of lipid/aliphatic/peptide-like compounds with low mass distributions and lignin-like compounds with oxidized/unsaturated groups existed in acidic- and alkaline-extracted DBC, respectively. A larger percentage of tannin-like/condensed aromatic compounds and higher average conditional stability constants (logK̅_Cu) of visible fluorescent components were found for DOM than for DBC. Overall, 200-320 Da and 320-480 Da molecular components contributed significantly to the logK̅_Cu values of UVA and visible fluorescent components, respectively, in DBC/DOM. Nitrogenous groups likely exhibited stronger binding affinities than phenolic/carboxylic groups. The sequential copper-binding responses of molecular compounds in DBC/DOM generally followed the order lipid/aliphatic/peptide-like compounds → tannin-like compounds → condensed aromatic compounds. These insights will improve the prediction of the potential effects of DBC on various contaminants and the risks of biochar application to ecosystems.

Insight into binding characteristics of copper(II) with water-soluble organic matter emitted from biomass burning at various pH values using EEM-PARAFAC and two-dimensional correlation spectroscopy analysis

The metal-binding characteristics of water-soluble organic matter (WSOM) emitted from biomass burning (BB, i.e., rice straw (RS) and corn straw (CS)) with Cu(II) under various pH conditions (i.e., 3, 4.5, and 6) were comprehensively investigated. Two-dimensional correlation spectroscopy (2D-COS) and excitation-emission matrix (EEM) -PARAFAC analysis were applied to investigate the binding affinity and mechanism of BB WSOM. The results showed that pH was a sensitive factor affecting binding affinities of WSOM, and BB WSOMs were more susceptible to bind with Cu(II) at pH 6.0 than pH 4.5, followed by pH 3.0. Therefore, the Cu(II)-binding behaviors of BB WSOMs at pH 6.0 were then investigated in this study. The 2D-absorption-COS revealed that the preferential binding with Cu(II) was in the order short and long wavelengths (237-239 nm and 307-309 nm) > moderate wavelength (267-269 nm). The 2D-synchronous fluorescence-COS results suggested that protein-like substances generally exhibited a higher susceptibility and preferential interaction with Cu(II) than fulvic-like substances. EEM-PARAFAC analysis demonstrated that protein-like (C1) substances had a greater complexation ability than fulvic-like (C2) and humic-like (C3) substances for both BB WSOM. This indicated that protein-like substances within WSOM played dominant roles in the interaction with Cu(II). As a comparison, RS WSOM generally showed stronger complexation capacity than CS WSOM although they exhibited similar chemical properties and compositions. This suggested the occurrence of heterogeneous active metal-binding sites even within similar chromophores for different WSOM. The results enhanced our understanding of binding behaviors of BB WSOM with Cu(II) in relevant atmospheric environments.

Laboratory and simulation study on the Cd(Ⅱ) adsorption by lake sediment: Mechanism and influencing factors

Sediments are the major sinks for Cd(Ⅱ) in the aquatic environment. Here, the detailed binding mechanisms and effects of environmental factors on Cd(Ⅱ) adsorption onto lake sediment were tested by a batch of adsorption and characteristic experiments. Sediment samples and sediment-Cd complexes were characterized using Scanning electron microscopy, Energy dispersive spectroscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, and X-ray diffraction spectral analyses. The interactive and main effect of parameters such as pH, flow velocity, Cd(II) concentration, sediment particle size, humic acid, fulvic acid and adsorption time involved in the adsorption process were determined using two models based on response surface methodology (RSM) and a back-propagation neural network with genetic algorithm (GABP). Results showed that Cd(II) adsorption onto sediment was mainly achieved through surface complexation with O-containing groups and precipitation with carbonate and sulfide. RSM was favorable for modeling Cd(II) adsorption in lake systems because it intuitively reflected the influence of the factors and had a good fitting precision (R² = 0.8838, RSME = 2.5496) close to that of the GABP model (R² = 0.8959, RSME = 2.5410). pH, sediment particle size, and humic acid exerted strong influences on Cd(II) immobilized by the sediment. Overall, our findings facilitate a better understanding of Cd(II) mobility in lakes and provide a reference for controlling heavy metals derived from both aqueous and sediment sources.

Brown carbon aerosols in the Indo-Gangetic Plain outflow: insights from excitation emission matrix (EEM) fluorescence spectroscopy

We report the first characterization of the aerosol brown carbon (BrC) composition in the Indian context using excitation emission matrix (EEM) fluorescence spectroscopy coupled with parallel factor (PARAFAC) analysis. We find that biomass burning (BB)-dominated wintertime aerosols in the Indo-Gangetic Plain (IGP) outflow are characterized by two humic-like (HULIS) (C1_aq and C2_aq) and one protein-like/fossil fuel-derived (C3_aq) component for aqueous-extractable BrC (BrCaq), and by one humic-like (C1_me) and one protein-like (C2_me) component for methanol-extractable BrC (BrCme). Strong correlations of the BB tracer nss-K+ with C1_aq and C2_aq (r = 0.75-0.84, p < 0.01) and C1_me (r = 0.77, p < 0.01) point towards the BB-dominated IGP outflow as the major source. This is also supported by the analysis of fluorescence indices, which suggest extensive humification of BB emissions during atmospheric transport. The HULIS components correlate significantly with BrC absorption (r = 0.85-0.94, p < 0.01), and contribute substantially to the BrC relative radiative forcing of 13-24% vis-à-vis elemental carbon (EC). There is strong evidence that the abundant BB-derived NOX leads to NO3- formation in the IGP plume and drives the formation of water-soluble nitroaromatics (NACs) that constrain BrCaq light absorption (r = 0.56, p < 0.01) to a considerable degree. Overall, the study uncovers complex atmospheric processing of the IGP outflow in winter, which has important implications for regional climate.

Molecular insights into the effects of pyrolysis temperature on composition and copper binding properties of biochar-derived dissolved organic matter

Biochar-derived dissolved organic matter (BDOM), which has a substantial impact on the environmental behavior of heavy metals, is critical for understanding the environmental efficacy of biochar. Here, we used a suite of advanced spectroscopic and mass spectroscopic methods to investigate the relationship among the pyrolysis temperature of biochar, composition of BDOM, and interactions of BDOM with Cu. The binding affinity of BDOM and Cu showed incredibly increase, with the increasing pyrolysis temperature (300-500 °C) which promoted the release of condensed aromatic compounds and oxygen-containing functional groups from biochar into dissolved phase. A notable difference in the sequences binding with Cu was occurred during the changing pyrolysis temperature. The amide only involved in the binding process between Cu and BDOM at low-temperature (300 and 400 °C), whereas phenolic only associated with the such binding process at high-temperature (500 °C). Apart from this, the carboxyl and polysaccharides took part in the binding process of Cu with BDOM, no matter how higher the temperature is. A further analysis by X-ray absorption spectroscopy revealed that bidentate carboxylic-Cu complexes appear to be the predominant binding pattern for Cu to BDOM. Our results might contribute to provide novel information for the environment applications of biochar.

Phosphate hinders the complexation of dissolved organic matter with copper in lake waters

The properties of phosphate in lakes and their ability to cause eutrophication have been well studied; however, the effects of phosphate on the environmental behavior of other substances in lakes have been ignored. Dissolved organic matter (DOM) and heavy metals may coexist with phosphate in lakes. Herein, the mechanisms underlying the influence of phosphate on heavy metals complexation with DOM were investigated using multi-spectroscopic tools. Overall, the amount of DOM-bound Cu(Ⅱ) decreased with the increasing phosphate content. Furthermore, the fluorescence excitation and emission matrix results combined with parallel factor analysis showed that when the Cu(Ⅱ) concentration increased from 0 to 5 mg/L and 50 μM phosphate to the reaction of DOM and copper, the fluorescence intensity of tyrosine (component 1), humic-like (component 2) and tryptophan (component 3) decreased by 36.46%, 57.34%, and 74.70% compared with the treatment with no phosphate addition, respectively. This finding indicates that the binding of different fluorescent components to Cu(Ⅱ) was restricted by phosphate. Furthermore, different functional groups responded differently to Cu(Ⅱ) under different phosphate concentrations. The binding sequence of different functional groups under high concentration of phosphate (phenolic hydroxyl group＞amide (Ⅰ) ＞carbohydrates) was completely opposite to that with no phosphate. These results demonstrated that phosphate could restrict the binding affinity of heavy metals with different fluorescent substances or organic ligands of DOM, suggesting that the comigration of DOM-bound heavy metals in lakes is hindered by phosphate and the risk of heavy metal poisoning in aquatic organisms is therefore diminished.

Effects of hydrophyte decomposition on the binding mechanism between fluorescent DOM and copper

Hydrophyte decomposition caused large amounts of dissolved organic matter (DOM) to enter aquatic environment that influence the migration and transformation of heavy metals (HMs). Six hydrophytes with five dry weight gradients (DWG) were used for the decomposition experiments. The results showed that protein-like materials occupy relatively high content in the hydrophyte-derived DOM. The binding properties of DOM-Cu(II) have been explored by using two-dimensional correlation spectroscopy (2D-COS) in conjunction with synchronous fluorescence spectroscopy (SFS) and log-transformed SFS. The weak signals of binding site can be amplified by the log-transformed 2D-COS analysis. Herein, more binding sites can be identified by the log-transformed 2D-COS analysis. The results reveal that tryptophan-like materials show a preferential sequence of binding Cu(II) in the hydrophyte-derived DOM with a relatively low DWG and sediment DOM, and fulvic-like substances indicate a preferential sequence of binding Cu(II) in the hydrophyte-derived DOM with a relatively high DWG. Meanwhile, the results of binding parameters indicate that the log K is the range of 3.61-4.25, 4.33-4.74, 4.59-4.97, 3.91-4.41, and 4.14-4.78 for D1-D5, respectively, suggesting that hydrophyte decomposition can change the binding affinity between DOM components and Cu(II). The complexes of fluorescent components with Cu(II) showed a high log K value at long wavelength (e.g. humic-like substances), and a relatively low fluorescent ligand proportion (f%) at shorter wavelength in the hydrophyte-derived DOM. However, the log K is the range of 3.08-4.31, 4.09-4.45, 3.93-4.35, 4.39-4.75, and 3.95-4.36 for C1-C5, separately. Protein-like substances with Cu(II) showed a relatively high log K value with the exception of C4. The log-transformed 2D-COS can be an analytical tool to understand the binding heterogeneity of DOM with HMs. The study can provide a guide for managing and controlling the effects of hydrophyte decomposition.

Study on the complexation of heavy metals onto biogas slurry DOM using two-dimensional correlation spectroscopy combined with the log-transformed synchronous fluorescence spectroscopy

The fluorescent components of dissolved organic matter (DOM) in biogas slurry can react with heavy metals (HMs) and affect the migration, transformation, toxicity, and bioavailability of HMs in soil. Fluorescence quenching titration combined with two-dimensional correlation spectroscopy (2D-COS) can reveal the binding mechanism between HMs and different fluorescent components of biogas slurry DOM. The logarithmic-transformed (log-transformed) 2D-COS can be used to decrease the difference in the fluorescence intensity between low-intensity and high-intensity fluorophores that provides a better insight into the binding mechanism between biogas slurry DOM and HMs. Synchronous maps suggest that protein-like substances are more susceptive to the variation of the concentration of metal ions than fulvic-like substances. Asynchronous maps show that the preferential bonding of Cu(II) and Cr(III) to humic-like substances can be found in the biogas slurry DOM, as well as Fe(III) and Pb(II) to protein-like materials. DOM-Cu(II) may lead to an increasing risk of the migration of Cu(II) from soil to water environment due to the low log K values in the range from 2.93 to 3.46. Protein-like substances can also increase the environmental risk of HMs when these low-stable complexes occur migration and transformation. The potential environmental risk of protein-like with HMs follows the order: Pb(II) > Cu(II) > Cr(III). Here we demonstrate that the log-transformed 2D-COS can also identify fluorescence components at longer wavelength with relatively low content and reveals their preferential binding sequence and the number of binding sites. The study on the complexation between biogas slurry DOM and HMs provides a scientific basis for the environmental chemical behavior of HMs after the application of biogas slurry in agricultural soils.

Insight into metal binding properties of biochar-derived DOM using EEM-PARAFAC and differential absorption spectra combined with two-dimensional correlation spectroscopy

A large amount of biochar-derived dissolved organic matter (BDOM) will be released into the environment with biochars application into repairing soil/water, which may alter the fate and transport of contaminants. In this study, four DOM samples were extracted from cauliflower root biochar (CRBC), reed straw biochar (RSBC), corn stalks biochar (CSBC), and potato stalk biochar (PSBC). Excitation-emission matrix combined with parallel factor (EEM-PARAFAC) analysis, differential absorbance spectra (DAS), and two-dimensional correlation spectroscopy (2D-COS) analysis were applied to explore the complexation property of BDOM with metals. DAS showed sites heterogeneity within the DOM pool for metals complexing. Humic-like and fulvic-like substances were main fluorescent components identified by EEM-PARAFAC. 2D-COS analysis revealed that polysaccharides and aliphatic firstly responded to Pb(II) binding with CRBC-derived DOM and three other biochar-derived DOM, respectively. While aliphatic groups, aromatic N=O, and polysaccharides gave the fastest response to Cu(II) binding with CRBC, RSBC, and the other two biochar-derived DOM, respectively.

Fluorescence characteristics of dissolved organic matter in several independent water bodies: possible sources and land-use effects

Dissolved organic matter (DOM) plays an important role in aquatic ecosystems. Most previous works have focused on the source, migration, and transformation of DOM in the same water body at several sampling sites, but few studies have focused on the differences in DOM among numerous independent water bodies. This study aimed to investigate the fluorescence properties of DOM and its relationships with water quality indexes, eutrophication levels, and land use in corresponding water catchments in several independent water bodies. Five fluorescent components were identified by the EEM-PARAFAC method in the current study. The UVC humic-like component C1 (λEx/Em = 255/454 nm) and UVA humic-like component C2 (λEx/Em = 260/474 nm) were derived from terrestrial plant decomposition or soil organic matter. The UVA humic-like component C3 (λEx/Em = 300/382 nm) was produced by microbial decomposition. The tryptophan-like component C4 (λEx/Em = 280/330 nm) and the tyrosine-like component C5 (λEx/Em = 225(280)/298 nm) were caused by the discharge of sewage. Farmland contributed more to DOC concentration, humic-like components (C1-C3), and humification index (HIX) than did forest and grassland. The maximum fluorescence intensities of C1, C2, C3, and lna(254) were positively related to the trophic state index (TSI), suggesting that humic-like components and lna(254) could be used as indicators to reflect the eutrophication levels of several independent water bodies.

Copper-binding properties of microplastic-derived dissolved organic matter revealed by fluorescence spectroscopy and two-dimensional correlation spectroscopy

Despite numerous studies on microplastics (MPs), little attention has been paid to the dissolved organic substances leached from MPs and their environmental fate. In this study, we explored the copper-binding characteristics of MP-derived dissolved organic matter (MP-DOM) leached from several MP types, including commercial polypropylene, polyvinylchloride, and expanded polystyrene, under dark and UV irradiation conditions. The copper-binding affinity of MP-DOM was examined using fluorescence quenching method based on different fluorophores identified via the excitation emission matrix-parallel factor analysis (EEM-PARAFAC). The heterogeneous distribution of binding sites across the functional groups of MP-DOM was further elucidated by utilizing two-dimensional correlation spectroscopy (2D-COS) based on Fourier transform infrared spectroscopy (FTIR). Phenol/protein-like fluorescence prevailed in all MP-DOM samples, whereas humic-like fluorescence was more pronounced in the irradiated MP-DOM. For all tested plastic types, two plastic-derived fluorescent components (C2 and C3) exhibited substantial fluorescence quenching with increasing copper concentrations. The calculated stability constants showed larger differences between the two leaching conditions than between the three MP types with higher log K_M values for the UV-irradiated (4.08-5.36) than dark-treated MP-DOM (1.05-3.60). The binding constants were comparable to those of natural organic matter with aquatic/terrestrial origins. The 2D-COS results further revealed that the oxygen-containing structures in MP-DOM generated by UV irradiation might be responsible for the higher binding affinity of the irradiated MP-DOM. This is the first study demonstrating the environmental reactivity of MP-DOM towards metal binding, highlighting the importance of leaching conditions for the metal-binding behavior of MP-DOM.

Advances in the characterization and monitoring of natural organic matter using spectroscopic approaches

Natural organic matter (NOM) is ubiquitous in environment and plays a fundamental role in the geochemical cycling of elements. It is involved in a wide range of environmental processes and can significantly affect the environmental fates of exogenous contaminants. Understanding the properties and environmental behaviors of NOM is critical to advance water treatment technologies and environmental remediation strategies. NOM is composed of characteristic light-absorbing/emitting functional groups, which are the "identification card" of NOM and susceptive to ambient physiochemical changes. These groups and their variations can be captured through optical sensing. Therefore, spectroscopic techniques are elegant tools to track the sources, features, and environmental behaviors of NOM. In this work, the most recent advances in molecular spectroscopic techniques, including UV-Vis, fluorescence, infrared, and Raman spectroscopy, for the characterization, measurement, and monitoring of NOM are reviewed, and the state-of-the-art innovations are highlighted. Furthermore, the limitations of current spectroscopic approaches for the exploration of NOM-related environmental processesand how these weaknesses/drawbacks can be addressed are explored. Finally, suggestions and directions are proposed to advance the development of spectroscopic methods in analyzing and elucidating the properties and behaviors of NOM in natural and engineered environments.

Effects of C/N ratio variation in swine biogas slurry on soil dissolved organic matter: Content and fluorescence characteristics

Nutrient-rich biogas slurry shows favorable prospects for application as an organic fertilizer in farmland. At the same time, due to differing sources and treatment methods, the C/N ratio of biogas slurry varies greatly. The effect of differences in C/N of biogas slurry on soil organic matter properties remains unclear. In this experiment, pig farm biogas slurry differing in C/N (3, 6, 8.84 and 12) was applied instead of fertilizer. Fluorescence spectroscopy combined with parallel factor analysis and principal component analysis were used to determine dissolved organic carbon (DOC) and fluorescent dissolved organic matter (FDOM) in soil dissolved organic matter (DOM). The experimental results showed that the DOC and FDOM contents of soil could be significantly increased at the initial stage of biogas slurry application. Compared with CK, on the 60th day, biogas slurry with a C/N of 12 exhibited the greatest improvement in DOC, FDOM as well as for Component 1, Component 2 and Component 3 contents in soil FDOM, 40.93%, 66.25%, 65.35%, 40.47%, and 78.42% respectively. However, compared with the 0th day, by the 60th day, biogas slurry with a C/N of 8.84 exhibited the greatest decrease in Component 4 content in soil FDOM, 74.68%. Biogas slurry with a C/N of 8.84 exerted the greatest promotion effect on corn growth, the utilization and transformation of Component 4 by plants and microorganisms in the soil. And it showed the strongest improvement in the degree of FDOM humification in the soil, the humification index increased from 4.16 ± 0.17 to 4.92 ± 0.58, compared with CK. This study provided new insights for the utilization of biogas slurry with respect to soil physical and chemical properties and maize plant growth.

The quality of dissolved organic matter extracted at different times from pig compost and its copper binding capacity based on EEM-PARAFAC

Dissolved organic matter extracted from compost tea, can be regarded as alternatives to inorganic fertilizers as well to be used as a washing agent for heavy metal polluted soil. However, the composition and quality of compost tea produced under different extraction time are still unknown. The objective of the current study was set to explore the influence of different extraction time (i.e., 6, 12, and 24 h) on the composition, quality, and copper binding capacity of compost tea originated from pig manure compost. The results indicated that the extraction time obviously influenced the phenolic, aromatic carboxylic, and polycyclic aromatic groups of compost tea. In addition, the compost tea undergo the shorter extraction time (i.e., 6 and 12 h) contained more protein and humic-like compositions. Among the all treatments tested herein, the compost tea produced from 12 h extraction time obviously exhibited higher aromaticity, molecular weight, and humification degree than other two treatments. The highest stability constant value (log K_M) was observed for the shortest extraction time, i.e., 6.08. According to the quality measures and copper binding capability, shorter extraction times (i.e., 6 and 12 h) would be suggested for compost tea production from pig manure compost.

Diverse molecular compositions of dissolved organic matter derived from different composts using ESI FT-ICR MS

Dissolved organic matter (DOM) derived from various composts can promote significant changes of soil properties. However, little is known about the DOM compositions and their similarities and differences at the molecular level. In this study, the molecular compositions of DOM derived from kitchen waste compost (KWC), green waste compost (GWC), manure waste compost (MWC), and sewage sludge compost (SSC) were characterized by electrospray ionization coupled with Fourier transform ion cyclotron resonance mass spectrometry (ESI FT-ICR MS). The molecular formulas were classified into four subcategories: CHO, CHON, CHOS, and CHONS. The KWC, MWC, and SSC DOM represented the highest fraction (35.8%-47.4%) of CHON subcategory, while the GWC DOM represented the highest fraction (68.4%) of CHO subcategory. The GWC DOM was recognized as the nitrogen- and sulfur-deficient compounds that were less saturated, more aromatic, and more oxidized compared with other samples. Further analysis of the oxygen, nitrogen-containing (N-containing), and sulfur-containing (S-containing) functional groups in the four subcategories revealed higher organic molecular complexity. Comparison of the similarities and differences of the four samples revealed 22.8% ubiquitous formulas and 17.4%, 11.1%, 10.7%, and 6.3% unique formulas of GWC, KWC, SSC, and MWC DOM, respectively, suggesting a large proportion of ubiquitous DOM as well as unique, source-specific molecular signatures. The findings presented herein provide new insight into the molecular characterization of DOM derived from various composts and demonstrated the potential role of these different compounds for agricultural utilization.

Organic amendments potentially stabilize metals in smelter contaminated Arctic soils: An incubation study

The long-term emission impacts of the nickel processing industry in the Kola Peninsula, the largest source of sulfur dioxide and heavy metals emissions in Northern Europe, have created vast technogenic barrens near the mineral industry complexes. The pace of rehabilitation using the improved remediation technologies to enhance sustainable environmental management and regional economic development is of crucial social and economic importance. In a 120-day incubation experiment, we evaluated the prospects for the restoration of two soils at different degradation stages via carbon pool regulation comparing to mineral ameliorants - NPK fertilizer, and liming agent. Organic additives used included a humic preparation based on an alkaline brown coal extract, wood-derived biochar, and peat-derived gel, supplied by mycorrhizae fungi. The results demonstrate that the selected organic amendments are suitable for restoration of acidic metal contaminated soils. Specifically, the treatments provided a measurable increase in soil carbon content, a marked decrease in acidity, a decrease in extractable metal contents, together with an enhanced nutrient uptake and vegetative growth. A stabilization effect increased from biochar to peat-gel, liming agent and humic preparation, with an accompanying increase in soil pH. Although biochar showed a reduced ability to metal stabilization, the associated treatments were the most productive. The most effective amendments in multi-metallic contaminated soils need to be able to stabilize bioavailability of metals, adjust pH to the optimum for plant growth, and regulate nutrient consumption.

Ecological indication based on source, content, and structure characteristics of dissolved organic matter in surface sediment from Dagu River estuary, China

Dissolved organic matter (DOM) controls the fate of a variety of nutrients and trace metals in river estuary systems. The aim of our study is to explore the sources, structure characteristics of sediment DOM, and potential ecological release risk (heavy metal, N and P) under the environmental conditions of Dagu River estuary. The relative contribution of DOM source was calculated by carbon stable isotope (combining δ¹³C_DOM and C/N ratios). The structural characteristics of sediment DOM in Dagu River estuary were determined by ultraviolet-visible spectroscopy (UV-vis) absorbance and fluorescence spectroscopy. The potential ecological risks of heavy metals and N and P release were also assessed. Results show that the relative contributions of rural area and aquaculture are high in Dagu River estuary. The humification degree of DOM in downstream river is higher than that in the estuary, and the sediment DOM in Dagu River estuary is influenced by both terrestrial input and biological metabolism. The potential risk of eutrophication in the estuary is high. Moreover, under the effect of aquaculture and rural area, there is higher potential ecological release risk of heavy metal in the estuary. And samples in the middle transect have the highest potential ecological risks of heavy metal. Therefore, a framework has been proposed to predict the ecological status of the estuary by analyzing the sources, content, and structural characteristics of sediment DOM. These results provide a new insight on ecological indication of DOM in Dagu River estuary.

An untargeted metabolomic approach for the putative characterization of metabolites from Scenedesmus obliquus in response to cadmium stress

Cadmium (Cd) is a widespread contaminant in aquatic systems and has a variety of toxicological implications on freshwater microorganisms. In this study, the green algae Scenedesmus obliquus was exposed to increasing Cd concentrations that inhibited growth by 20% (12.6 μmol L^-1), 30% (39.8 μmol L^-1) and 40% (83.2 μmol L^-1) and the metabolite profiles of released and cellular biomolecules were explored using an untargeted direct infusion high resolution Fourier transform ion cyclotron resonance mass spectrometry approach. In Cd untreated cultures, intrinsic differences in composition existed between released biomolecules and freeze-dried cells. Based on putatively characterized compound groups, a greater proportion of Cys-GSH isomers and carboxyamides were present in exudates whereas sugar isomers and phosphonic acids comprised most cellular metabolites. In cultures exposed to 83.2 μmol L^-1 Cd, an overall shift in metabolomic response across both released biomolecules and cellular components resulted in an increase of lipid-based esters, and Cys-GSH isomers. These two important metabolites are used in antioxidant defense mechanisms and reactive oxygen species prevention during cellular stress. The diversity of metabolites also decreased as Cd concentrations increased when compared to untreated cultures, suggesting that overall metabolites specialize upon metal stress. We show systemic shifts from sugar and carboxylic isomers to specialized proteins and lipid isomers to help S. obliquus cope with stress. These findings highlight the potential use of this green algae as a potential biosorbent and sheds light into the metabolomics of Cd toxicology and insights into microbial metal adaptation.

The application of two-dimensional correlation spectroscopy for the binding properties of heavy metals onto digestate-derived DOM from anaerobic digestion of chicken manure

Anaerobic digestate has been widely used for agricultural activities as an organic fertilizer product. Dissolved organic matter (DOM) derived from anaerobic digestate plays a key role in the speciation, bioavailability and ultimate fate of metals that is related to agriculture and food safety as well as the soil environment. Hence, the binding properties of Cu, Pb and Zn with digestate DOM are investigated using two-dimensional correlation spectroscopy (2D-COS) in combination with ultraviolet absorption, synchronous fluorescence spectra (SFS) and Fourier transform infrared (FTIR) spectroscopy. The 2D absorption COS shows that the DOM at 200 nm is most susceptive with the addition of Pb, followed by Zn and Cu. The log-transformed absorption spectra can also obtain more valuable signals than that from conventional absorption spectra. The 2D-SFS-COS indicates that protein-like peak is more sensitive to the variation of the concentration of metal ions, and fulvic-like substances can preferentially interact with the three heavy metals (HMs). The 2D-FTIR-COS reveals that Cu(II) and Zn(II) ions can be bonded preferentially to the N-H of secondary amide (II), and phenolic OH groups shows a favorable binding with Pb(II). Humic-like peaks with Cu(II) and Zn(II) obtains relatively higher log K_M values than fulvic- and protein-like substances. However, the proportion of initial fluorescence (f) for DOM-Cu(II) and DOM-Zn(II) decreased with an increase in wavelength. Protein-like materials have more fluorescent substances that can combine with Cu(II) and Zn(II). This study provides a guide for understanding the geochemical behavior of metal ions in agricultural soils when anaerobic digestate is applied as an organic fertilizer product.

Dissolved organic matter released from rice straw and straw biochar: Contrasting molecular composition and lead binding behaviors

It remains debatable whether carbonized straw reapplying is a better solution than direct straw reapplying. Comparison of the characteristics and complexation behaviors of dissolved organic matter (DOM) derived from straw (ST) and biochar (BC) may offer new insights, but little current information exists. Herein, DOM samples were characterized by Fourier transform ion cyclotron resonance mass spectrometry (FTICR-MS), revealing that the molecular weight and condensed aromatic components of BCDOM (457.70 Da and 71.16%, respectively) were higher than those of STDOM (433.48 Da and 3.13%, respectively). In particular, the N-containing compounds of BCDOM was more aromatic than STDOM. By combining spectroscopic techniques, complexation modeling, and chemometric analysis, BCDOM was shown to exhibit higher binding parameters (log K_M) and more binding sites for Pb than STDOM. Noteworthily, the two binding sites, aromatic NO and aromatic NO₂, existed only in the interaction of BCDOM with Pb. Furthermore, while phenol-OH displayed the fastest response to Pb in both STDOM and BCDOM, the binding sequences were not exactly the same. These differences may be related to the variations in the aromaticity and N-containing structures of DOM detected by FTICR-MS. These findings have implications on the stewardship of straw- and biochar-amended soil.

Humic extracts from hydrochar and Amazonian Anthrosol: Molecular features and metal binding properties using EEM-PARAFAC and 2D FTIR correlation analyses

Organic matter plays many roles in the soil ecosystem. One property of the substance concerns the metal complexation and interaction with organic contaminants. In this sense, the humic substances (HS), a heterogeneous mixture of compounds, naturally derived from degradation of biomass, have been widely studied in environmental sciences. Recent advances showed a new way to produce humic-like substances (HLS) through hydrothermal carbonization of biomass. Thus, this study aimed to evaluate the HLS of hydrochars, produced by using a mixture of sugarcane bagasse and vinasse with sulfuric acid added (1 and 4% v/v), and to assess their interactions with metal ions, (Fe(III), Al(III), Cu(II) and Co(II)) using EEM-PARAFAC and a two-dimensional FTIR correlation analysis. The results were compared to the humic substances extracted from the Amazonian Anthrosol, as a model of anthropogenic organic matter. NMR analysis showed that humic-like extracts from hydrochar are mainly hydrophobic, while the soil has a greater contribution of polar moieties. The HLS and HS showed similar complexation capacities for Fe(III), Al(III) and Cu(II) assays. For Co(II) HLS exhibited larger affinities than HS. Two-dimensional correlation analysis FTIR showed that chemical groups may undergo conformational alteration with metal additions to achieve more stable arrangements (higher stability constant). Therefore, these results contribute more knowledge about the mechanism of HS and metal ion interaction, as well as showing that HTC can be an interesting option for HLS production, to be used as humic based materials.

Effects of soil particle size on the adsorption, distribution, and migration behaviors of heavy metal(loid)s in soil: a review

In recent years, toxic pollution from heavy metal(loid)s in soil has become a severe environmental problem worldwide. The migration and transformation of heavy metal(loid)s in soil have become hot topics in the field of environmental research. Soil particle size plays an important role in influencing the environmental behavior of heavy metal(loid)s in soil. This review collates and synthesizes the research on the adsorption, distribution, and migration of heavy metal(loid)s in soil particles. There is no unified method for soil particle separation, since the purposes of different studies are different. Regardless of adsorption or distribution characteristics, fine soil particles generally exhibit a higher capacity to combine heavy metal(loid)s; however, certain studies have also observed a contrary phenomenon, according to which heavy metal(loid)s were more enriched in coarser particles. The adsorption and distribution of heavy metal(loid)s in soil particles were essentially determined by the physicochemical properties of the soil particles. Land use obviously affected the distribution of heavy metal(loid)s in the soil particles. Organic matter had an important influence on the distribution and availability of heavy metal(loid)s in agricultural and forest soils, while for urban soils and sediments, clay minerals or metal (hydr)oxides may play the dominant role. Preferential surface migration of fine particles during erosion processes did not always lead to the enrichment of heavy metal(loid)s in the lost soil. Further research should be conducted to explore the relationships among the soil aggregates, organic matter, heavy metal(loid)s, and soil microorganisms; the association between the distribution and availability of heavy metal(loid)s and the properties of soil particles; and the migration patterns of heavy metal(loid)s in soil particles at different scales.

Effects of digestate DOM on chemical behavior of soil heavy metals in an abandoned copper mining areas

The influence of digestate dissolved organic matter (DOM) on chemical behavior of soil heavy metals (HMs) in an abandoned copper mining areas was explored by fluorescence quenching titration and heavy metal extracting experiment. Five fluorescent components were obtained from digestate DOM by PARAFAC model combined with the EEM data. The stability constant (log K_M) values were in the range of 4.95-5.53, 5.05-5.29, 5.21-6.00, and 4.12-4.75 for DOM-Cr(III), DOM-Cu(II), DOM-Fe(III) and DOM-Pb(II) complexes, respectively. Alcohols, ethers and esters in digestate DOM were preferentially combined with Fe(III), Cu(II) and Zn(II). However, phenolic hydroxyl groups were more likely to combine with Cr(III) and Pb(II). The speciation distribution of HMs indicated that mining resulted in a higher concentration of Cu(II) in the grassland soil (GS) than those in the agricultural soil (AS) and forest land soil (FS). Fe-Mn oxides and organic forms of Pb(II) increased dramatically due to mining. Digestate DOM extraction can increase the content of Cr(III), Fe(III) and Pb(II), and decrease the content of Cu(II) and Zn(II) in the AS, GS, and FS. However, the contents of HMs in the mining soil (MS) and slag soil (SS) decreased due to the application of digestate DOM, except for Cu(II) in the SS.

Spectroscopic response of soil organic matter in mining area to Pb/Cd heavy metal interaction: A mirror of coherent structural variation

Understanding the interaction between heavy metals and soil organic matter (SOM) in mining area is important for the clarification of the environmental behaviors of heavy metals. In this work, the coherence of structural changes of SOM during interaction with Pb²⁺ and Cd²⁺ ions were examined by using UV-vis/fluorescence spectroscopy coupled with correlation analyses. The result showed that phenolic- and carboxylic-like groups of SOM were engaged in the complexation of heavy metals (Pb²⁺ and Cd²⁺) with SOM, resulting in the formation of highly conjugated macromolecules/aggregates and an increase in molecular weight/size. Fluorescent humic-like, fulvic-like, and protein-like species were involved in the binding with Pb²⁺/Cd²⁺ ions, which were closely correlated with phenolic-like and carboxylic-like constitutes. SOM was more favorable to bind with Pb²⁺ ions than Cd²⁺ ions, with a less susceptive of SOM structure to Pb²⁺/Cd²⁺ ions in the mining area compared to those off the mining area under heavy metal stress. These results may provide a new insight for the treatment and remediation of heavy metal-polluted soil in mining area.

Analysis of the complexation behaviors of Cu(II) with DOM from sludge-based biochars and agricultural soil: Effect of pyrolysis temperature

Pyrolysis temperature is one of the important factors that affect the structure and composition of biochar-derived dissolved organic matter (DOM), which may impact interaction between biochar-derived DOM and Cu(II). Moreover, soil application of biochars pyrolyzed at different temperatures is supposed to cause different complexation behaviors between soils-derived DOM and Cu(II). However, little is known about these aspects. Here, incubation experiments and quenching titration experiments were conducted to explore such pyrolysis temperatures-dependent changes in sludge and sludge-based biochars (SSBA). Two-dimension correlation spectroscopy (2D-COS) indicated humic-like fraction had stronger affinities with Cu(II) in DOM from both sewage sludge (SS) and 500 °C sludge-based biochars (SSB5) while protein-like fraction showed the fastest response to Cu(II) binding in DOM from 300 °C sludge-based biochars (SSB3). One protein-like substance (Component 1) and two humic-like substances (Component 2 and 3) were identified in the DOM derived from SSBA through excitation-emission matrix-parallel factor (EEM-PARAFAC) analysis. Moreover, the Cu(II) complexation affinities of component 1, 2 and 3 decreased from 4.43, 4.53 and 4.86 to 3.26, 3.50 and 3.39 with increasing pyrolysis temperatures, respectively. The addition of 10% SS evidently increased the complexation affinities of humic-like substances in soil-derived DOM from 4.43 to 4.68 to 4.60-6.86, while the complexation affinities of humic-like substances decreased from 4.52 to 4.78 to 3.82-4.50 at a 10% amendment of sludge-based biochars. Compared with sewage sludge, agricultural soil amended with 10% sludge-based biochars had better performance in the aspect of Cu(II) mobility, but had weaker detoxication effect on Cu(II).

XPS and two-dimensional FTIR correlation analysis on the binding characteristics of humic acid onto kaolinite surface

The stabilization and preservation of soil organic matter have been attributed to the strong reactive sites of mineral surfaces that cause physical isolation and chemical stabilization due to the organic-mineral interface. However, much of the micro-scale knowledge about interactions between organic ligands and minerals largely remains at the qualitative level, and neglects the heterogeneity of functional groups of organic matter. Here, we report the use of molecular-scale technologies of two-dimensional FTIR Correlation Spectroscopy (2D-FTIR-CoS) and X-ray Photoelectron Spectroscopy (XPS) to directly measure the binding processes of humic acid (JGHA) groups onto kaolinite surface. The spectroscopy results showed that the carboxylate groups, aliphatic OH and aromatic structure participate in the binding of JGHA on kaolinite surface. The carboxylic and phenolic hydroxyl interact with kaolinite surface through the interfacial COAl/Si bonds. Kaolinite prefers to adsorb C-groups at pH 4.0 and O-groups at pH 8.0. The interaction of COO^- group at 1566 cm^-1 of JGHA leads to the formation of inner-sphere complex first and then outer-sphere complex with increasing contact time. The interaction of COOH group at 1261 cm^-1 with the AlOH²⁺ of kaolinite was could be ascribed to ligand exchange and/or electrostatic attraction, whose contribution was evaluated to be 13.90%, 7.65% and 0% at pH 4.0, 6.0 and 8.0, respectively. These results of molecular binding provide quantitative mechanistic insights into organic-mineral interactions and expound the effect of functional groups of HA on binding mechanisms, and thus bring important clues for better understanding the mobility and transformation of land‑carbon including mineral-bound carbon.

Comparison of copper binding properties of DOM derived from fresh and pyrolyzed biomaterials: Insights from multi-spectroscopic investigation

The binding of dissolved organic matter (DOM) with metals affects the latter's biogeochemical processing in the environment. This study used multi-spectroscopic analyses to compare the heterogeneities of the Cu(II) binding properties of DOM derived from fresh and pyrolyzed biomaterials. The results showed that the DOM derived from fresh macrophyte (MDOM) and their corresponding biochar (BDOM) consisted mostly of protein-like and humic-like substances, respectively. The stability constant (log K_M) of protein-like matter in the MDOM was 5.27, and the values of humic-like components in the BDOM were 4.32-5.15. Compared with the MDOM, the BDOM exhibited lower affinities and active binding sites for Cu(II). In addition, the BDOM contents decreased after pyrolysis. Therefore, the pyrolysis of fresh biomaterials into biochar is a promising method for reducing the potential migration risk posed by Cu(II) due to the MDOM being a positive carrier for Cu(II) contamination. Polysaccharide was the only functional group that participated in the binding of Cu(II) in both MDOM and BDOM. Aliphatic groups and amides associated with protein-like matter were responsible for the Cu(II) binding to MDOM, whereas phenolic and aromatic groups mainly participated in the complexation of BDOM-Cu(II). The CO group of amide I in the MDOM, and polysaccharide in the BDOM, showed the fastest response to Cu(II). This study was helpful for elucidating the effects of fresh and pyrolyzed biomaterials (biochars) on the environmental behavior of Cu(II) at the molecular level.

The comparison of dissolved organic matter in hydrochars and biochars from pig manure

Dissolved organic matter (DOM) has an important effect on soil fertility, activity of microorganisms and transport of contaminants. In this study, DOM released by the hydrochar and biochar prepared under various conditions from pig manure, was assessed using a combination of UV-Visible spectroscopy, fluorescence excitation-emission (EEM) spectrophotometry and ¹H-nuclear magnetic resonance (¹H NMR). The dissolved organic carbon (DOC) extracted from the hydrochar and biochar ranged from 3.34-11.96% and 0.38-0.48%, respectively, and the highest DOM was released by HCK0.5 (180 °C and 0.5% KOH). The aliphatic compounds were most common in DOM which mainly included three humic acid-like and one protein-like substance. The hydrochar-DOM had a larger molecular weight and lower aromaticity than biochar-DOM, but the effect of temperature on the DOM characteristics of hydrochar and biochar was opposite. The acidic treatment increased the content of functional groups containing oxygen and nitrogen in hydrochar-DOM, and alkaline treatment increased the content of aliphatic compounds. The results obtained are beneficial to select carbonation process and guide the rational application of hydrochar and biochar from pig manure in soil remediation field.

Enhancing copper binding property of compost-derived humic substances by biochar amendment: Further insight from two-dimensional correlation spectroscopy

Little is known about the environmental impacts of biochar (BC) amendment on the immobilization of heavy metals in compost-treated fields. In consequence, this study was designed to explore the effects of BC amendment on the copper (Cu) binding properties of compost-derived humic substances (HS). To this end, unamended and 4.7% (by wet weight) BC-amended compost were incubated in parallel with regular wetting for 6 months. The stability constants for Cu binding, calculated based on the fluorescence quenching technique, were higher for the compost-derived HS with versus without BC amendment. The result suggests that BC addition to compost may intensify the immobilization of heavy metals in a compost-treated field. Copper binding efficacy increased after the incubation with or without BC amendment. However, the enhanced Cu binding efficacy of the BC-amended HS was preserved even after the long-term incubation. Two-dimensional correlation spectroscopy revealed that the short wavelength fulvic-like fluorescence followed by humic-like fluorescence were preferentially associated with Cu binding. However, the range of wavelengths that tracked the binding of Cu were modified after BC amendment. This study evidenced beneficial and synergetic effects of BC amendment on the abatement of the potential environmental risk from heavy metal polluted field on a long-term basis.

DOM derivations determine the distribution and bioavailability of DOM-Se in selenate applied soil and mechanisms

Straw amendment and plant root exudates modify the quality and quantities of soil dissolved organic matter (DOM) and then manipulate the fractions of soil selenium (Se) and its bioavailability. Two typical soils with distinct pH were selected to investigate the effect of different contributors on DOM-Se in soil. The mechanisms relying on the variation in DOM characteristics (quality, quantity and composition) were explored by UV-Vis, ATR-FTIR and 3D-EEM. Straw amendment significantly (p < 0.05) suppressed the selenate bioavailability. The reduction in wheat Se content was greater in krasnozems than in Lou soil, as more HA fraction appeared in krasnozems. The root exudates of wheat mainly elevated the low molecular hydrophilic compounds (Hy) in soil, which contributed to the SOL-Hy-Se fractions and thus grain Se in soils (p < 0.01). However, straw amendment promoted DOM transforming from small molecules (Hy and FA) to aromatic large molecules (HA), when accompanied with the reduction and retention of Se associated with these molecules. As a result, selenium bioavailability and toxicity reduced with DOM amendment and DOM-Se transformation.

Humic extracts of hydrochar and Amazonian Dark Earth: Molecular characteristics and effects on maize seed germination

Inspired by the presence of anthropogenic organic matter in highly fertile Amazonian Dark Earth (ADE), which is attributed to the transformation of organic matter over thousands of years, we explored hydrothermal carbonization as an alternative for humic-like substances (HLS) production. Hydrothermal carbonization of sugarcane industry byproducts (bagasse and vinasse) in the presence and absence of H₃PO₄ afforded HLS, which were isolated and compared with humic substances (HS) isolated from ADE in terms of molecular composition and maize seed germination activity. HLS isolated from sugarcane bagasse hydrochar produced in the presence or absence of H₃PO₄ comprised both hydrophobic and hydrophilic moieties, differing from other HLS mainly in terms of phenolic content, while HLS isolated from vinasse hydrochar featured hydrophobic structures mainly comprising aliphatic moieties. Compared to that of HLS, the structure of soil-derived HS reflected an increased contribution of fresh organic matter input and, hence, featured a higher content of O-alkyl moieties. HLS derived from lignocellulosic biomass were rich in phenolics and promoted maize seed germination more effectively than HLS comprising alkyl moieties. Thus, HLS isolated from bagasse hydrochar had the highest bioactivity, as the presence of amphiphilic moieties therein seemed to facilitate the release of bioactive molecules from supramolecular structures and stimulate seed germination. Based on the above results, the hydrothermal carbonization of lignocellulosic biomass was concluded to be a viable method of producing amphiphilic HLS for use as plant growth promoters.

Insight into the cadmium and zinc binding potential of humic acids derived from composts by EEM spectra combined with PARAFAC analysis

To investigate the characteristics of humic acids (HAs) and the combined effects of HAs on heavy metals, three HAs derived from kitchen waste compost (KW), pig manure compost (PM), and green waste compost (GW) were exposed to Cd(II) and Zn(II). The elemental contents and functional groups of HAs were different due to different raw materials. Fulvic-, humic-like content C1, humic-like content C4, and two protein-like contents C2 and C3 were identified in three HAs by EEM-PARAFAC analysis. The effects of HAs on heavy metals were associated with the metal species and HA source. Our results reveal that titrating Cd(II) caused stronger fluorescence quenching compared to titrating Zn(II) for all HAs. C1 and C4 of KW-HAs and PM-HAs showed fluorescence quenching after Cd(II) was added, whereas negligible fluorescence quenching was found when Zn(II) was added. In addition, C1 and C4 in the GW-HAs did not show obvious fluorescence quenching regardless of whether Cd(II) or Zn(II) was added. C3 in all HAs caused significant fluorescence quenching, suggesting that C3 plays an important role affecting the mobility of heavy metals. Consequently, these results suggest that HAs from KW and PM have greater potential for Cd-contaminated soil remediation than those from GW.

Cultivation substrata differentiate the properties of river biofilm EPS and their binding of heavy metals: A spectroscopic insight

River biofilms inevitably serve as recipients of heavy metals including copper (Cu) and cadmium (Cd) following their introduction in fluvial systems. Nevertheless, the effects of cultivation substrata on the characteristics of river biofilm extracellular polymeric substances (EPS) and the binding behaviors of heavy metals on biofilms remain unclear. Integrating spectroscopic methods with chemometric analyses, we explored the binding behaviors of Cu(II) and Cd(II) onto biofilm EPS cultivated from two representative substrata at the molecular level. Chemical analysis revealed that biofilm cultivated on polyethylene (PE) pieces contained more non-fluorescent protein fractions, whereas EPS from periphyton grown on mineral, i.e., cobblestones was richer in aromatic fractions and polysaccharides. Excitation-emmision matrix combined with parallel factor analysis suggested a stronger interaction between fluorophores in periphytic EPS with Cu(II) compared to fluorophores in plastic biofilm EPS. Integrated use of infrared spectroscopy and two-dimensional correlation analyses revealed that, during the heavy metal binding processes, the amines and phenolics in plastic biofilm EPS gave the fastest responses to metal binding. While the amides and the aliphatic fractions in periphytic EPS showed a preferential binding to heavy metals. This study differentiates the effects of cultivation substrata on structuring the biofilm EPS characteristics and offers new insights into the environmental behaviors of heavy metal discharge into fluvial systems in river biofilm matrix.

The composition difference of macrophyte litter-derived dissolved organic matter by photodegradation and biodegradation: Role of reactive oxygen species on refractory component

The overgrowth of macrophytes has become serious due to increasing eutrophication in shallow lakes. The primary degradation processes of macrophytes litter, including photodegradation and biodegradation, induce considerable patchiness in the concentration and bioavailability of dissolved organic matter (DOM). In this study we investigated the composition evolution of DOM derived from emergent aquatic plant litter, Phragmites australis, in microbial degradation, photodegradation, and the combination of bio- and photo-degradation. Results revealed that the effects of photo- and biodegradation on the composition difference of macrophyte litter-derived DOM during short- and long-term degradation phase were different. Although large changes in DOM were observed after five days of incubation, the abundance and chemical composition were similar in the three treatments. However, more concentration of DOM was produced by combined photo- and biodegradation at the long-term degradation phase, and the composition of DOM showed less lignin-like formulae, as well as less condensed aromatic and aromatic compounds when compared to sole treatments. More reactive oxygen species (ROS) were found under the combined treatments, thus the contents of refractory components (condensed aromatic- and aromatic compound groups) were reduced. This study provide deeper insight into the fate of DOM and relevant biogeochemical processes in eutrophic lakes.

Interactions between Imidacloprid and Thiamethoxam and Dissolved Organic Matter Characterized by Two-Dimensional Correlation Spectroscopy Analysis, Molecular Modeling, and Density Functional Theory Calculations

The heavy application of neonicotinoid insecticides in agricultural production has burdened the environment. In the present study, interactions of two neonicotinoid insecticides imidacloprid and thiamethoxam with dissolved organic matter (DOM) were investigated by spectroscopic techniques, molecular modeling, and density functional theory (DFT) calculations. The static mechanism of imidacloprid and thiamethoxam quenching the endogenous fluorescence of DOM was assessed through time-resolved analyses. During the binding process, a protein-like substance binds imidacloprid and thiamethoxam later than a humic-like substance, as analyzed by two-dimensional correlation spectroscopy, but more strongly than the humic-like substance, as suggested by molecular modeling and DFT calculations. The conformational changes of DOM are attributed to imidacloprid and thiamethoxam, as assessed with three-dimensional spectra. Fourier transform infrared spectroscopy indicated that DOM binds imidacloprid and thiamethoxam by hydroxyl, aliphatic C-H, amide I, and carboxyl to form stable DOM-imidacloprid and DOM-thiamethoxam complexes. Understanding the changes in the structural conformation of humic-like and protein-like substances with imidacloprid and thiamethoxam helps further understand the fate of the neonicotinoids in the environment.

Parallel faction analysis combined with two-dimensional correlation spectroscopy reveal the characteristics of mercury-composting-derived dissolved organic matter interactions

Dissolved organic matter (DOM) is regarded as the environmentally friendly substance. Strong complexes could be formed between DOM and heavy metals. Thus, the distribution, bioavailability, toxicity, and fate of heavy metals could be controlled in the environment. The widely spread method for characterizing metal-organic interactions is restricted to combine parallel faction analysis (PARAFAC) with the complexation model. However, a DOM PARAFAC component always contains two or more peaks. Therefore, the traditional method cannot reveal the inner changes of PARAFAC components or whether all the DOM peaks in one PARAFAC component are bound with metal during the metal-organic binding process. In this work, two-dimensional correlation spectroscopy (2DCOS) combined with PARAFAC and the complexation model were employed to reveal the binding speed and ability of different fluorescent peaks from DOM PARAFAC components during the binding process of mercury (Hg²⁺) to DOM. The results in this study showed that during the Hg²⁺-DOM binding process, fluorescent peaks in tryptophan-like component all presented Hg²⁺-binding ability. However, only humic-like component ligands showed Hg²⁺-binding ability. With these promising results, the true Hg²⁺ binding rate and ability of different DOM ligands can be revealed, which is helpful for addressing environmental pollution.

Modeling the quenching of fluorescence from organic matter in Amazonian soils

Knowledge of the interactions of soil organic matter (SOM) with metal species is important in order to obtain information concerning the fates of the metals in environment, whose reactive functional groups present in SOM can provide high complexation capacity. The aim of this study was to evaluate the interactions involving humic acids (HA) and fulvic acids (FA), extracted from Amazonian soils, with Cu(II) and Al(III) ions, using fluorescence quenching spectroscopy. The obtained results showed that the data for the humic fractions of the Amazonian Spodosols could be fitted with one to one complexation model, which provided the best representation of the changes in fluorescence quenching after addition of Cu(II) or Al(III) ions. It was found that the HA presented fewer complexation sites and lower stability constants, compared to the FA samples. Furthermore, the FA showed selective interaction with the metals, while the HA fraction was less selective and could be associated its homogeneous structure. The results showed that the humic acids required 10 times more carbon in their structures than fulvic acids for complexing a metal atom. This behavior can be associated to the fact that the Fulvic Acid fraction has higher mobility and greater interaction during the profile when compare humic acids. Hence, given the diversity of metals to which the HA has affinity, this soil fraction appears to be mainly responsible for soil fertility, while the FA fraction has higher mobility and greater interaction with water.

Biochar-induced metal immobilization and soil biogeochemical process: An integrated mechanistic approach

The nature of biochar-derived dissolved organic matter (DOM) has a crucial role in the interactions between biochar and metal immobilization, carbon dynamics, and microbial communities in soil. This study utilized excitation-emission matrix coupled with parallel factor analysis (EEM-PARAFAC) modeling to provide mechanistic evidence of biochar-induced influences on main soil biogeochemical processes. Three biochars produced from rice straw, wood, and grass residues were added to sandy and sandy loam soils and incubated for 473 d. Microbial and terrestrial humic-like fluorescent components were identified in the soils after incubation. The sandy loam soil exhibited a higher DOM with microbial sources than did the sandy soil. All biochars reduced Pb bioavailability, whereas the rice straw biochar enhanced the As bioavailability in the sandy loam soil. The biochar-derived aliphatic-DOM positively correlated with As bioavailability (r = 0.82) in the sandy loam soil and enhanced the cumulative CO₂-C (r = 0.59) in the sandy soil. The promoted cumulative CO₂-C in the sandy soil with all biochars correlated with the enhanced microbial communities, in particular, gram-positive (r = 0.59) and gram-negative (r = 0.59) bacteria. Our results suggest that the integration of EEM-PARAFAC with spectroscopic indices could be useful for a comprehensive interpretation of the soil quality changes in response to the application of biochar.

Impact of drying/wetting conditions on the binding characteristics of Cu(ii) and Cd(ii) with sediment dissolved organic matter

The biogeochemical processing of dissolved organic matter (DOM) in bottomland sediment under drying/wetting conditions regulates the environmental behavior of heavy metals. Although moisture is a critical factor, the structural characteristics of DOM and its reactivity with heavy metals under drying/wetting conditions are not well known. Herein, the response of DOM to drying/wetting conditions and its influence on the binding of Cu(ii) and Cd(ii) onto DOM were clarified via various multi-spectroscopic techniques. Ultraviolet-visible spectra (UV-Vis) showed that higher aromatic, hydrophobic, and molecular weight fractions were observed in sediment DOM under drying conditions than those under wetting conditions. The binding abilities for Cd(ii) with DOM under drying/wetting conditions are lower than those for Cu(ii). The stability constants between Cu(ii) and DOM were found to decrease under drying/wetting conditions; however, the binding capacities for Cu(ii) increased, especially under wetting conditions. Two-dimensional correlation spectroscopy based on Fourier-transform infrared (FTIR) and synchronous fluorescence spectra (SFS) showed that Cu(ii) and Cd(ii) have different binding sequences and binding sites and that Cu(ii) has more binding sites under drying and wetting conditions; however, Cd(ii) shows the opposite behavior. These results clearly demonstrate that the binding of sediment DOM with Cu(ii) is more prevalent and stable compared with Cd(ii) under drying and wetting conditions. Because of its relatively low binding capacity and binding stability, Cd(ii) can exhibit a high environmental hazard for migration and transformation with DOM due to water flow under wetting conditions. This study helps reveal the impact of drying/wetting conditions on the environmental behavior of heavy metals in bottomland wetlands.

The biogeochemical processing of dissolved organic matter (DOM) in bottomland sediment under drying/wetting conditions regulates the environmental behavior of heavy metals.

Experimental and modeling study of proton and copper binding properties onto fulvic acid fractions using spectroscopic techniques combined with two-dimensional correlation analysis

Fulvic acid (FA) significantly influences the bioavailability and fate of heavy metals in environments, while its acid-base characters and metal binding processes are still unclear. Here, spectroscopic techniques combined with multiple models (e.g., NICA-Donnan model) and two-dimensional correlation spectroscopy (2D COS) were applied to explore the proton and copper binding properties of FA sub-fractions (FA₃-FA₁₃). The charge densities, average contents of carboxylic and phenolic groups, average dissociation constants pKa₁ and pKa₂ of sub-fractions ranged 0-16 meq∙g∙C^-1, 5.03-9.58 meq∙g∙C^-1, 2.52-4.67 meq∙g∙C^-1, 4.15-4.33 and 8.52-9.72, respectively. FA sub-fractions had a relatively narrow distribution of carboxyl group and a broad distribution of phenolic group. FA sub-fractions also exhibited roughly two phenolic hydroxyl groups per every 1-3 phenyl rings. Differential absorbance spectra (DAS) derived Gaussian bands were associated to the inter-chromophore interactions, the changes of molecular conformations and functional groups with copper addition. Differential spectra slopes (DSlope_{275-295&325-375}) were more significant with higher copper concentration and copper amounts bonded to carboxylic groups. UV-Vis and fluorescence spectra with 2D heterospectral COS revealed the copper binding heterogeneities and sequential orders of chromophores and fluorophores, quantitatively confirming by the order of conditional stability constants (log K_Cu: 4.64-5.56). Salicylic-/polyhydroxyphenolic, hydroxyl and amino groups were strongly associated to the basic units for fluorophores. Sequential changes followed the order of humic-like→fulvic-like materials for FA₃/FA₅, humic-like→fulvic-like→tryptophan-like materials for FA₇, and humic-like→tryptophan-like→fulvic-like→tyrosine-like materials for FA₉/FA₁₃. Spectroscopic techniques combined with various models (especially for 2D COS) are beneficial to elucidate the binding heterogeneity and sensitivity for metal-organic matters at the functional group level.

Sulfide and arsenic compounds removal from liquid digestate by ferric coagulation and toxicity evaluation

The liquid digestate has been regarded as a potential organic fertilizer for its benefit in nutrients recovery. However, the potential risk of hazardous substances remaining in the wastewater was still one of the main obstacles for the wastewater application in the circular agriculture. The pretreatment is important to remove pollutants with relatively satisfied results. Ferric coagulation was a feasible way to simultaneously remove various contaminants in the wastewater with few residuals of ferric ions under alkaline and neutral conditions. In special, it could reduce the residues of sulfide and arsenic compounds. We gained insights into the mechanism of ferric coagulation in removing sulfide and arsenic compounds. Redox reaction and precipitation were the reasons resulting in removing sulfide. The formation of precipitate by combining with iron(III) contributes to the removal of arsenic compounds. Toxicity tests using Scenedesmus obliquus and Chlorella pyrenoidosa showed an obvious reduction of toxicity for the liquid digestate after ferric coagulation. Besides, ferric coagulation could efficiently remove turbidity, reduce COD, and eliminate dissolved organic matters correlated with the fate of heavy metal and antibiotics. Therefore, this paper could give basic data and technique supports for the secure utilization and pollution control of liquid digestate. PRACTITIONER POINTS: Most sulfide and arsenic compounds were removed by 0.01 M ferric coagulation. Mechanisms on removing hazardous substances by ferric coagulation were discussed based on analysis of X-ray photoelectron spectroscopy and FTIR. The evaluation by two algae showed the toxicity of liquid digestate could be reduced obviously after ferric coagulation.

Investigation on the effects of sediment resuspension on the binding of colloidal organic matter to copper using fluorescence techniques

Colloidal organic matter (COM), an important component of dissolved organic matter (DOM), plays a significant role in the transport and cycling process of the heavy metals. In this study, COM was fractionated from DOM using 0.2 μm, 100 kDa, and 2 kDa ultrafiltration membranes and the fluorescence spectra of the COM fractions were obtained. Excitation and emission matrix-parallel factor analysis and two-dimensional fluorescence correlation spectroscopy were applied to investigate the effect of sediment resuspension on the heavy metal binding characteristics of COM fractions with different molecular weights. Compared with the DOM fractions, COM exhibited stronger binding affinities and more binding sites for Cu(II), which was attributed to the significant binding effects of the components of COM. Our results suggested that the protein-like components were mainly responsible for binding heavy metals in the high-molecular-weight fraction (>100 kDa), whereas the humic-like components were responsible in the low-molecular-weight fraction (<100 kDa). Furthermore, sediment resuspension significantly influenced the composition and heavy metal binding characteristics of COM. Following resuspension, the binding affinity of COM decreased significantly, which might be attributed to the binding competition from inorganic colloids. Thus, COM plays an important role in the binding and transportation behavior of heavy metals, which is an important consideration in shallow lake ecosystems.

Effect of swine biogas slurry application on soil dissolved organic matter (DOM) content and fluorescence characteristics

The application of biogas slurry as an organic fertilizer is a promising method for utilizing breeding manure wastewater. At present, the impact of biogas slurry on the properties of organic matter in soil is not clear. In this study, a pot experiment in which chemical fertilizers were replaced with biogas slurry from a swine farm was performed. The fluorescence spectra combined with parallel factor (PARAFAC) analysis and principal component analysis (PCA) were used to explore the influence of biogas slurry on the protein and humic substance contents in the dissolved organic matter (DOM) in soil. The results showed that there were two proteins (component 3 (C3) and component 4 (C4)) and two humic substances ( component 1 (C1) and component 2 (C2)) in the DOM of the experimental soil. The application of swine biogas slurry can significantly increase the content of DOM in soil, but the increase was weakened with extended time. Compared with the CKA, the biogas slurry significantly increased the C1, C2, C3 and C4 contents in the initial stage by 116.17%, 76.41%, 578.71% and 278.13%, respectively. Within 28 days of planting corn, proteins with simple molecular structure in the DOM in the soil began to be transformed into humic substances with high molecular weight and more complex molecular structures. On the 60th day, the contents of C1 and C2 in the DOM of the treated treatments soil increased by 13.72%-34.40% and 5.05%-17.78% respectively, and tyrosine content decreased by 90.11%-94.41%. This study provides a new perspective on the effects of biogas slurry application on soil properties and sustainable utilization of soil.

Molecular insights into the transformation of dissolved organic matter during hyperthermophilic composting using ESI FT-ICR MS

The aim of this work was to study the molecular compositional changes of dissolved organic matter (DOM) during hyperthermophilic composting (HTC) using electrospray ionization coupled with Fourier transform ion cyclotron resonance mass spectrometry. Our results reveal that DOM in hyperthermophilic compost mainly consisted of lignins/carboxylic-rich alicyclic molecules (72%) with relatively lower H/C (1.24), and the higher double bound equivalent (5.98) and aromaticity index (0.22) when compared with the DOM in composting materials, suggesting that HTC led to an increase in carboxyl-rich, unsaturated, and aromatic compounds. Profiles of the DOM's transformation indicated that low O/C (O/C < 0.3) and high H/C (H/C < 1.5) compounds were preferentially decomposed in the hyperthermophilic phase of HTC. Abundant produced intermediates, such as lignin phenols and amino sugars, were further transformed to refractory humic substances. This investigation extends the current understanding of the molecular mechanisms on humification of HTC, and reveals further applications for hyperthermophilic compost.

Investigating the binding properties between antimony(V) and dissolved organic matter (DOM) under different pH conditions during the soil sorption process using fluorescence and FTIR spectroscopy

Antimony (Sb) is listed as a priority pollutant by European Union and U.S. Environmental Protection Agency. However, reports on its environmental behavior, particularly the sorption process in soil are still limited. In this paper, Sb(V) was selected as the sorbate and the black soil as the sorbent. The initial sorption rate (k₂q_e,cal²) was calculated to be 0.1254 mg g^-1∙min^-1 and the maximum sorption amount (q_m) 57.33 mg g^-1. Once the dissolved organic matter (DOM) was removed from the soil, the values of k₂q_e,cal² and q_m went down to 0.1066 mg g^-1∙min^-1 and 19.01 mg g^-1, respectively. These results suggested that the existence of DOM significantly influenced the mass transfer rate and sorption amount of Sb(V) in soil. In order to find out the reason why DOM exerted such an influence, the binding interaction mechanism between Sb(V) and DOM was investigated under different pH values. The protein-like and humic-like substances as well as the functional groups of CO, phenol hydroxyl, C-O, C-H, C-X and sulfur/phosphorus contributed to the formation of DOM-Sb(V)-complexes under pH of 7.0, in which the humic-like substance and the functional groups containing oxygen showed higher binding affinity for Sb(V) than protein-like substance and other functional groups, respectively. The protein-like substance and some functional groups disappeared under pH of 4.0 and 10.0. Alkaline condition resulted in a bigger impact on reducing the number of functional groups than acid condition. It can be concluded that the strongest binding interaction occurred at pH of 7.0 then followed by 4.0 and 10.0. This paper might be helpful to further studying the environmental behavior of Sb(V) in soil.

In situ investigation of intrinsic relationship between protonation behavior and HA characteristics in sediments

Proton-binding study of humic acid (HA) is critical for describing and modeling the binding mechanism of HA with heavy metals. However, little is known about the intrinsic relationship between protonation behavior and HA characteristics, especially in sediments. In this study, HA was extracted from sediments and combination of spectrographic titration with parallel factor analysis, Gaussian fitting model and two-dimensional correlation spectroscopy analysis was developed as a novel in-situ tool. Results indicated that the intensity changes of fluorophores of sediment HA might be dependent on the structure characteristics (fused or non-fused ring) of phenolic species in the protonation process. Compared with phenolic groups (A1, 5.27 ± 0.05 eV; A3, 3.91 ± 0.02 eV), the carboxyl groups (A2, 4.65 ± 0.03 eV) exhibited greater contribution in the response of chromophores to the protonation process of sediment HA. Furthermore, proton binding to sediment HA first occurred in carboxyl groups and then in phenolic groups. The combined technique is a promising approach for the examination of the binding sites, binding capacities, and binding order in proton-HA binding process under environmental concentrations. Importantly, this method is a sensitive, effective and non-destructive technique without any need pre-concentrate.

Development of correlation spectroscopy (COS) method for analyzing fluorescence excitation emission matrix (EEM): A case study of effluent organic matter (EfOM) ozonation

Two-dimensional correlation spectroscopy (2DCOS) has been used as a powerful tool for analyzing spectral features, but it has never been applied to fluorescence excitation-emission matrix (EEM) data due to the incompatible dimensions. This study first investigated EEM-COS by reducing the dimensions of the EEM (using parallel factor analysis, PARAFAC) for fitting to 2DCOS (EEM-PARAFAC-COS). The fluorescence changes of effluent organic matter (EfOM) during ozonation were studied using EEM-COS and synchronous fluorescence (SF)-2DCOS. The conventionally used SF-2DCOS proved to be biased due to the intrinsic drawback of SF, while the EEM-PARAFAC-COS gave accurate and trustworthy results. Homo-EEM-PARAFAC-COS indicated that the fluorescence protein-like and fulvic-like substances in EfOM were preferentially ozonated compared to humic-like substances. Hetero-EEM-PARAFAC-COS analyses on the EEM, FTIR, UV-vis absorbance, and size-exclusion chromatography showed that the fluorescence protein-like and fulvic-like substances in EfOM were associated with lower molecular weight (MW, ∼0.95 kDa), UV absorbance at ∼280 nm, and more electron-enriched aromatics (with amide and phenolic groups), which explained their ozonation preference, while humic-like substances were related to carboxylic groups, UV absorbance at ∼255 nm, and organics at MW of ∼4.50 kDa. This work demonstrated the great potential of EEM-PARAFAC-COS in studying fluorescence change and correlating fluorescence with other spectra.