Biofilm on microplastics in aqueous environment: Physicochemical properties and environmental implications

Microplastic sources, formation, toxicity and remediation: a review

Microplastic pollution is becoming a major issue for human health due to the recent discovery of microplastics in most ecosystems. Here, we review the sources, formation, occurrence, toxicity and remediation methods of microplastics. We distinguish ocean-based and land-based sources of microplastics. Microplastics have been found in biological samples such as faeces, sputum, saliva, blood and placenta. Cancer, intestinal, pulmonary, cardiovascular, infectious and inflammatory diseases are induced or mediated by microplastics. Microplastic exposure during pregnancy and maternal period is also discussed. Remediation methods include coagulation, membrane bioreactors, sand filtration, adsorption, photocatalytic degradation, electrocoagulation and magnetic separation. Control strategies comprise reducing plastic usage, behavioural change, and using biodegradable plastics. Global plastic production has risen dramatically over the past 70 years to reach 359 million tonnes. China is the world's top producer, contributing 17.5% to global production, while Turkey generates the most plastic waste in the Mediterranean region, at 144 tonnes per day. Microplastics comprise 75% of marine waste, with land-based sources responsible for 80-90% of pollution, while ocean-based sources account for only 10-20%. Microplastics induce toxic effects on humans and animals, such as cytotoxicity, immune response, oxidative stress, barrier attributes, and genotoxicity, even at minimal dosages of 10 μg/mL. Ingestion of microplastics by marine animals results in alterations in gastrointestinal tract physiology, immune system depression, oxidative stress, cytotoxicity, differential gene expression, and growth inhibition. Furthermore, bioaccumulation of microplastics in the tissues of aquatic organisms can have adverse effects on the aquatic ecosystem, with potential transmission of microplastics to humans and birds. Changing individual behaviours and governmental actions, such as implementing bans, taxes, or pricing on plastic carrier bags, has significantly reduced plastic consumption to 8-85% in various countries worldwide. The microplastic minimisation approach follows an upside-down pyramid, starting with prevention, followed by reducing, reusing, recycling, recovering, and ending with disposal as the least preferable option.

Monitoring of biofilm development and physico-chemical changes of floating microplastics at the air-water interface

Microplastics in the aquatic environment serve as a habitat for microbial life, on which they can form biofilms. However, how the development of the biofilm alters the properties of floating microplastics that are at the air-water interface and, therefore, not fully submerged, is not well understood. In this context, an aging experiment was conducted to monitor biofilm formation and changes in physico-chemical properties of low-density polyethylene (floating) microplastics over time. The growth of the biofilm followed the typical bacterial/biofilm growth phases and reached about 30% of the total mass of the microplastics, while the concentration of extracellular polymeric substances within the biofilm remained stable. Presence of chlorophyll a and urease activity indicated presence of photosynthetic microrganisms within the biofilm which was also confirmed by analysis of the biofilm composition. Chemical characterization by FTIR showed the formation of additional functional groups attributed to the formed biofilm, and SEM imaging showed cracks on the surface of the aged microplastics, indicating incipient degradation of the polyethylene. Moreover, the adsorption capacity of the aged particles for metals (Pb(II)) was 52% higher compared to the pristine ones. Aging increased the density and size of the particles; however, it did not lead to the submersion of the aged particles even after 12 weeks of aging, suggesting that additional environmental processes may influence the transport of microplastics from the air-water interface into the water body.

Aquatic plastisphere: Interactions between plastics and biofilms

Because of the high production rates, low recycling rates, and poor waste management of plastics, an increasing amount of plastic is entering the aquatic environment, where it can provide new ecological niches for microbial communities and form a so-called plastisphere. Recent studies have focused on the one-way impact of plastic substrata or biofilm communities. However, our understanding of the two-way interactions between plastics and biofilms is still limited. This review first summarizes the formation process and the co-occurrence network analysis of the aquatic plastisphere to comprehensively illustrate the succession pattern of biofilm communities and the potential consistency between keystone taxa and specific environmental behavior of the plastisphere. Furthermore, this review sheds light on mutual interactions between plastics and biofilms. Plastic properties, environmental conditions, and colonization time affect biofilm development. Meanwhile, the biofilm communities, in turn, influence the environmental behaviors of plastics, including transport, contaminant accumulation, and especially the fragmentation and degradation of plastics. Based on a systematic literature review and cross-referencing from these disciplines, the current research focus, and future challenges in exploring aquatic plastisphere development and biofilm-plastic interactions are proposed.

Succession of Bacteria Attached to Microplastics After Transferring from a Mariculture Area to a Seagrass Meadow

Microplastics have been recognized as a novel niche for bacteria. However, studies have characterized the plastisphere microbial community in situ without exploring the microbial changes after transferring to other ecosystems. Here we focus on bacterial succession on typical microplastics (polypropylene and expanded polystyrene) and natural substrates (wood) after transferring from mariculture area to seagrass meadows system. Using high-throughput sequencing of 16 S rRNA, we found that alpha diversity significantly reduced after transferring and microplastics especially PP had significant separations on PCoA plots at different succession stages. The abundance and metabolic pathways of potential pathogen-associated microorganisms are significantly decreased. The relative abundance of xenobiotics biodegradation pathways was significantly lower and of energy metabolism pathways was significantly higher by comparing before and after transferring. Main environmental factors affecting microbial communities changed from nutrient characteristics to basic physicochemical properties after transferring. The succession times of the microbial communities of the three materials were different.

Adsorption and desorption mechanisms of oxytetracycline on poly(butylene adipate-co-terephthalate) microplastics after degradation: The effects of biofilms, Cu(II), water pH, and dissolved organic matter

As the application of biodegradable polymers has grown, so has the interest in exploring the environmental behaviors of biodegradable microplastics (MPs). In this study, we investigated the interaction of oxytetracycline (OTC) with poly(butylene adipate-co-terephthalate) (PBAT) MPs after biodegradation, and explored the effect of the coexisting Cu(II) on OTC adsorption and desorption processes. The maximum adsorption amounts of virgin PBAT, biofilm PBAT, and degraded PBAT reached 692.05 μg·g^-1, 1396.21 μg·g^-1, and 1869.93 μg·g^-1, respectively, and the presence of Cu(II) increased the OTC adsorption capacities by 431.16 %, 165.99 %, and 132.94 %, respectively. The enhanced adsorption capacities were attributed to the formation of PBAT-Cu-OTC complexes. The remarkable desorption hysteresis of OTC was observed on the degraded PBAT but not on the biofilm PBAT when Cu(II) was present, due to the complexation between Cu(II) and biofilms. The effect of Cu(II) varied depending on the MP physiochemical properties (e.g., surface areas, zeta potentials, and functional groups) and the environmental factors (e.g., the solution pH and coexisting dissolved organic matter). Fourier transform infrared spectroscopy (FTIR) coupled with X-ray photoelectron spectroscopy (XPS) identified the Cu(II) bridging effect, and various interaction forces between PBAT and OTC, including hydrogen-bonding, π-π, cation-π, and electrostatic interactions.

Bioremediation of microplastics in freshwater environments: A systematic review of biofilm culture, degradation mechanisms, and analytical methods

Microplastics, defined as particles <5 mm in diameter, are emerging environmental pollutants that pose a threat to ecosystems and human health. Biofilm degradation of microplastics may be an ecologically friendly approach. This review systematically summarises the factors affecting biofilm degradation of microplastics and proposes feasible methods to improve the efficiency of microplastic biofilm degradation. Environmentally insensitive microorganisms were screened, optimized, and commercially cultured to facilitate the practical application of this technology. For strain screening, technology should focus on microorganisms/strains that can modify the hydrophobicity of microplastics, degrade the crystalline zone of microplastics, and metabolise additives in microplastics. The biodegradation mechanism is also described; microorganisms secreting extracellular oxidases and hydrolases are key factors for degradation. Measuring the changes in molecular weight distribution (MWD) enables better analysis of the biodegradation behaviour of microplastics. Biofilm degradation of microplastics has relatively few applications because of its low efficiency; however, enrichment of microplastics in freshwater environments and wastewater treatment plant tailwater is currently the most effective method for treating microplastics with biofilms.

Mangrove degradation retarded microplastics weathering and affected metabolic activities of microplastics-associated microbes

Currently, information on microplastics (MPs) weathering characteristics and ecological functions driven by MPs-associated microbes in mangrove ecosystems remains unclear, especially in the degraded areas. Herein, we compared the weathering characteristics of MPs in both undegraded and degraded mangrove sediments, and then explored the potential interactions between their weathering characteristics and microbially-driven functions. After 70 days of incubation, different MPs (including polyethylene PE, polystyrene PS, and polylactic acid PLA) were strongly weathered in mangrove sediments, with significant erosion features. Interestingly, more obvious weathering characteristics were found for MPs in the undegraded mangrove sediments. O/C ratio value of MPs in the undegraded sediments was 2.3-3.0 times greater than that in the degraded ones. Besides, mangrove degradation reduced network complexity among MPs-associated microorganisms and affected their metabolic activities. Bacteria involved in carbon cycle process enriched on nondegradable MPs, whereas abundant bacteria responsible for sulphur cycle were observed on PLA-MPs. Moreover, these relevant bacteria were more abundant on MPs in the undegraded mangrove sediments. Mangrove degradation could directly and indirectly affect MPs weathering process and microbially-driven functions through regulating sediment properties and MPs-associated microbes. During weathering, contact angle and roughness of MPs were key factors influencing the colonisation of hydrocarbon degradation bacteria on MPs.

Sediment bacterial and fungal communities exhibit distinct responses to microplastic types and sizes in Taihu lake

Microplastics (MPs) are emerging contaminants in aquatic environments, yet their impact on sediment microbiota and biogeochemical processes were not well reported. Herein, microcosm experiments were performed to investigate the effects of MPs (Polystyrene, PS and Polyethylene, PE) with three size classes (ranging from 100 nm to 150-200 μm) on sediment bacterial and fungal communities over 60-day incubation from Taihu Lake. High-throughput sequencing revealed the alpha diversities of bacterial and fungal communities were reduced by MPs, dependent on MPs' size and type. Bacterial community structures were significantly altered under all MPs treatments, with clustering for the same size class for PS and PE. Fungal community structures were significantly affected for all MPs, with PS and PE exhibiting different effects. Co-occurrence network analysis suggested MPs changed bacterial and fungal network complexities. Proteobacteria and Ascomycota formed strong associations with other phyla and demonstrated tolerance to MPs exposure. Actinobacteria, Firmicutes, and Chytridiomycota were the main respondents to MPs. The enzyme concentrations were stimulated by MPs, indicating carbon and nitrogen uptakes might be increased. Therefore, PS and PE had similar impacts on the microbial community (particularly bacteria), and sizes of MPs were the main influencing factors. MPs shifted community structure and network with distinct responses from bacteria and fungi, likely leading to the alteration of microbial-involved carbon and nitrogen cycling.

The effect of polystyrene microplastic and biosolid application on the toxicity and bioaccumulation of cadmium for Enchytraeus crypticus

Plastics smaller than 5 mm that end up in a soil environment are known as microplastics (MPs). Microplastics have become a common contaminant in agricultural areas in addition to metals. However, the effect of cadmium (Cd) on soil organisms has not been clearly defined in the presence of MPs. In addition to MPs, biosolid application as a soil amendment in agricultural lands is also leading to shifts in soil conditions, such as the concentrations of nutrients and organic matter. Therefore, the aim of this study is to investigate the toxicity and bioaccumulation of Cd for Enchytraeus crypticus in the presence of polystyrene (PS)-MPs and biosolids to provide insight into their possible interactions. The lethal toxic concentration (LC50) for Cd was higher than 650 mg Cd/kg dry soil for all conditions. The presence of PS-MPs increased the toxicity of Cd for which EC50 was 102 and 38 mg Cd/kg dry soil without and with Cd, respectively, which may be the result of an increased exposure rate through adsorption of Cd on PS-MPs. On the contrary, the presence of biosolids decreased the toxicity of Cd where EC50 was 193 and 473 mg Cd/kg dry soil for the sets applied with 0.6 and 0.9 g biosolids, respectively. Coexistence of biosolids and PS-MPs decreased the reproduction toxicity of Cd, which is similar to the biosolid effect (EC50 is 305 mg Cd/kg dry soil). Bioaccumulation of Cd only positively correlated with its initial concentration in soil and was not affected by the presence of PS-MPs or biosolids. Integr Environ Assess Manag 2023;19:489-500. © 2022 SETAC.

Carrier type affects anammox community assembly, species interactions and nitrogen conversion

The impacts of carrier type on anammox community assembly, species interactions and nitrogen conversion were studied in this work. It was found that in addition to shared species with higher abundance, different carrier types recruited rare species by imposing selection pressure. Results from co-occurrence networks revealed that carrier type strongly influenced interactions between keystone species inhabiting within anammox biofilm through potentially inducing niche differences. Overall, elastic cubic sponges would lead to closer cooperation between different populations, whereas plastic hollow cylinders would trigger fiercer competition. Meanwhile, the results based on metagenomics sequencing showed carrier type significantly affected nitrogen conversion related genes abundances, and higher reads number was detected on the elastic cubic sponges. The information obtained in this work could provide some valuable information for the selection and optimization of carrier type in the anammox process.

Laser-based techniques: Novel tools for the identification and characterization of aged microplastics with developed biofilm

Microplastics found in the environment are often covered with a biofilm, which makes their analysis difficult. Therefore, the biofilm is usually removed before analysis, which may affect the microplastic particles or lead to their loss during the procedure. In this work, we used laser-based analytical techniques and evaluated their performance in detecting, characterizing, and classifying pristine and aged microplastics with a developed biofilm. Five types of microplastics from different polymers were selected (polyamide, polyethylene, polyethylene terephthalate, polypropylene, and polyvinyl chloride) and aged under controlled conditions in freshwater and wastewater. The development of biofilm and the changes in the properties of the microplastic were evaluated. The pristine and aged microplastics were characterized by standard methods (e.g., optical and scanning electron microscopy, and Raman spectroscopy), and then laser-induced breakdown spectroscopy (LIBS) and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) were used. The results show that LIBS could identify different types of plastics regardless of the ageing and major biotic elements of the biofilm layer. LA-ICP-MS showed a high sensitivity to metals, which can be used as markers for various plastics. In addition, LA-ICP-MS can be employed in studies to monitor the adsorption and desorption (leaching) of metals during the ageing of microplastics. The use of these laser-based analytical techniques was found to be beneficial in the study of environmentally relevant microplastics.

Analysis of microplastics in soils on the high-altitude area of the Tibetan Plateau: Multiple environmental factors

Microplastics (MPs), a class of emerging contaminants, are ubiquitous in the environment, but limited information is known about them in remote terrestrial environment at high-altitude areas with inconvenient traffic and sparsely populated. In this study, 54 soil samples were collected from various land use patterns (greenhouse, ordinary farmland, grassland, and bare land) in western area of the Tibetan Plateau to determine the influence of land use type, altitude, meteorological parameters, and distance from the road edge on MP distribution. The MP abundance ranged from 0 (not detected) to 190 items/kg, with an average number of 64.8 items/kg. The concentration of MPs was slightly negatively correlated with altitude because of less human activities in high-altitude areas (especially agricultural activities). The random forest (RF) models showed that altitude was the most important driving factor that affected the MP distribution. Small-sized MPs were more abundant at higher altitudes than at low ones, and the special natural environment of the high-altitude areas (tall vegetation scarcely, UV, and strong wind speed) may be conducive to the degradation of MPs in surface soils. The special source of MPs in non-agricultural soils was associated with traffic behavior: parking and rest behavior beside roads at high altitude areas, which filled an important source of MPs in the plateau area. This study emphasized the need to investigate the effects of traffic activities on MPs in remote areas at high altitudes.

Microplastics influence the fate of antibiotics in freshwater environments: Biofilm formation and its effect on adsorption behavior

Microplastics (MPs) are substrates available for biofilms colonization in natural water environments. The biofilms formation may enhance the ability of MPs to adsorb harmful contaminants. Herein, we investigated the biofilms formation of three different MPs (PVC, PA and HDPE) in simulated natural environment, and observed the chemical structure, charge property, hydrophobicity and other properties of MPs affect microbial biomass and community composition. More importantly, potential pathogens were found in all three MPs biofilms. Furthermore, the adsorption capacities of original MPs and biological aging MPs for norfloxacin (NOR) was compared. HDPE has the largest adsorption capacity for NOR, while PA has the smallest adsorption capacity for NOR. It was concluded that the formation of biofilms enhanced the adsorption of NOR by 50.60 %, 24.17 % and 46.02 % for PVC, PA and HDPE, respectively. In addition, hydrogen-bond interaction, electrostatic interaction and hydrophobic interaction were found to dominate the adsorption of NOR by MPs. Our study contributed to improve the understanding of the interactions between aging MPs and contaminants in the natural water environments, and provided essential information for ecological risk assessment of MPs.

Microfiber-loaded bacterial community in indoor fallout and air-conditioner filter dust

Microfibers (MFs) are widely existed in indoor air; however, characteristic of microbiota on MFs is largely unknown. In this study, air-borne MFs were collected from fallout or air-conditioner (AC) filter dust in three types of indoor space including living room, dormitory and office. Both plastic and natural MFs were identified by Fourier transform infrared spectroscopy. Ultramicroscopic observation showed dense biofilms adhering on surfaces of MFs. Fallout MFs contained more bacteria but fewer fungi than MFs from AC filter dust. MFs-loaded bacteria were of highest abundance in living rooms, following dormitories and offices. Bacterial community and its diversity were further analyzed by 16S rRNA High-throughput sequencing. Up to 4540 of bacterium OTUs were shared in these MFs samples, unique OTUs in fallout and AC filter samples accounting for 26.3 % and 25.7 % of the total. Compared to MFs fallout, AC filter MFs contained more species of pathogenic bacteria, such as Betaproteobacteriales and Ralstonia, with obviously different β-diversity between two groups. Phenotypic analysis showed that fallout and AC filter MFs bacteria presented high index values of film formation, oxidative stress tolerance and potential pathogenicity. Overall, these results suggest that abundant bacteria including pathogen can be loaded on MFs, and would pose health risks through delivery of indoor MFs.

Effects of environmental and anthropogenic factors on the distribution and abundance of microplastics in freshwater ecosystems

Although microplastics are emerging marine pollutants that have recently attracted increasing attention, it is still difficult to identify their sources. This study reviewed 6487 articles to determine current research trends and found 237 effective concentration points after sorting, which were distributed in four regions and related to freshwater ecosystems. Results found that 15 environmental variables represented natural and anthropogenic environmental characteristics, of which seven environmental variables were selected for experimental modelling. Random forest models fitted sample data, thus facilitating the identification of regional microplastics distribution. The global random forest model had random forest importance scores (RFISs) for gross domestic product, population, and the proportion of agricultural land use were 15.76 %, 15.64 %, and 14.74 %, respectively; these indicate that human activities significantly affected the global distribution of microplastics. In Asia, agriculture and urban activities are the main sources of microplastics, with an RFIS of 11.58 % and 12.24 % for the proportion of agricultural and urban land use, respectively. Activities in urban areas were determined to be the main influencing factors in North America, with an RFIS of 13.92 % for the proportion of urban land use. Agricultural activities were the main influencing factors in Europe, with RFISs for the proportion of agricultural land use of 16.90 %. Our results indicate that region-specific policies are required to control microplastics in different regions, with soil composition being a latency factor that affects microplastics' distribution.

Physicochemical and biological ageing processes of (micro)plastics in the environment: a multi-tiered study on polyethylene

Pollution by plastic and microplastic impacts the environment globally. Knowledge on the ageing mechanisms of plastics in natural settings is needed to understand their environmental fate and their reactivity in the ecosystems. Accordingly, the study of ageing processes is gaining focus in the context of the environmental sciences. However, laboratory-based experimental research has typically assessed individual ageing processes, limiting environmental applicability. In this study, we propose a multi-tiered approach to study the environmental ageing of polyethylene plastic fragments focusing on the combined assessment of physical and biological processes in sequence. The ageing protocol included ultraviolet irradiation in air and in a range of water solutions, followed by a biofouling test. Changes in surface characteristics were assessed by Fourier transform infrared spectroscopy, scanning electron microscopy, and water contact angle. UV radiation both in air and water caused a significant increase in the density of oxidized groups (i.e., hydroxyl and carbonyl) on the plastic surface, whereby water solution chemistry influenced the process both by modulating surface oxidation and morphology. Biofouling, too, was a strong determinant of surface alterations, regardless of the prior irradiation treatments. All biofouled samples present (i) specific infrared bands of new surface functional groups (e.g., amides and polysaccharides), (ii) a further increase in hydroxyl and carbonyl groups, (iii) the diffuse presence of algal biofilm on the plastic surface, and (iv) a significant decrease in surface hydrophobicity. This suggests that biological-driven alterations are not affected by the level of physicochemical ageing and may represent, in real settings, the main driver of alteration of both weathered and pristine plastics. This work highlights the potentially pivotal role of biofouling as the main process of plastic ageing, providing useful technical insights for future experimental works. These results also confirm that a multi-tiered laboratory approach permits a realistic simulation of plastic environmental ageing in controlled conditions.

Microplastic pollution in aquatic environments may facilitate misfeeding by fish

Numerous recent studies have documented ingestion of microplastics (MPs) by many aquatic animals, yet an explanation for misfeeding by fish remains unexplained. Here we tested the hypothesis that biofilm (biofouling) on MP surfaces due to exposure in the aquatic environment facilitates misfeeding in fish. Spherical polystyrene (PS) was cultured for 0-22 weeks in a freshwater environment to grow a biofilm on the MPs. Goldfish were employed in a simple feeding experiment with and without provision of genuine food at ecologically relevant MP concentrations. Absorbance (ABS), which is a proxy for biofilm formation, increased exponentially within three weeks of initiation and reached a plateau after approximately five weeks. Although fish did not swallow the MPs, "capture" occurred when food pellets were in the vicinity and significantly increased in probability with aging. Duration of capture also increased significantly with increasing aging. These results suggest that drifting of MPs in aquatic environments may facilitate fish misidentification of MPs as edible prey.

Plastisphere showing unique microbiome and resistome different from activated sludge

Plastisphere (the biofilm on microplastics) in wastewater treatment plants (WWTPs) may enrich pathogens and antibiotic resistance genes (ARGs) which can cause risks to the ecological environment by discharging into receiving waters. However, the microbiome and resistome of plastisphere in activated sludge (AS) systems remain inconclusive. Here, metagenome was applied to investigate the microbial composition, functions and ARGs of the Polyvinyl chloride (PVC) plastisphere in lab-scale reactors, and revealed the effects of tetracycline (TC) and/or Cu(II) pressures on them. The results indicated that the plastisphere provided a new niche for microbiota showing unique functions distinct from the AS. Particularly, various potentially pathogenic bacteria tended to enrich in PVC plastisphere. Moreover, various ARGs were detected in plastisphere and AS, but the plastisphere had more potential ARGs hosts and a stronger correlation with ARGs. The ARGs abundances increased after exposure to TC and/or Cu(II) pressures, especially tetracycline resistance genes (TRGs), and the results further showed that TRGs with different resistance mechanisms were separately enriched in plastisphere and AS. Furthermore, the exogenous pressures from Cu(II) or/and TC also enhanced the association of potential pathogens with TRGs in PVC plastisphere. The findings contribute to assessing the potential risks of spreading pathogens and ARGs through microplastics in WWTPs.

Combined toxic effects of enrofloxacin and microplastics on submerged plants and epiphytic biofilms in high nitrogen and phosphorus waters

With the wide application of plastic products, microplastic pollution has become a major environmental issue of global concern. Microplastics in aquatic environments can interact with organic pollutants, causing a combined effect on submerged macrophytes. This study investigated the response mechanisms of the submerged plant Myriophyllum verticillatum and epiphytic biofilm to the antibiotic enrofloxacin, microplastics, and their combined exposure in a high nitrogen and phosphorus environment. The results indicated that Myriophyllum verticillatum was not sensitive to enrofloxacin of 1 mg L^-1, while 10 and 50 mg L^-1 enrofloxacin inhibited the uptake of nitrogen and phosphorus by the plants, as well as triggered oxidative stress in the plant leaves, causing irreversible damage to the plant cells. In addition, enrofloxacin altered the structure of the leaf epiphytic biofilm community. Interestingly, 1, 5, and 20 mg L^-1 microplastics had no significant effect on the plant, while they facilitated the aggregation of microorganisms, increasing the abundance of the leaf epiphyte biofilm. The combination of enrofloxacin and microplastics induced a synergistic effect on Myriophyllum verticillatum. Specifically, the rate of nitrogen and phosphorus uptake by the plant was reduced, the content of photosynthetic pigments decreased, and antioxidant enzyme activity was further increased. In addition, the diversity of the leaf epiphytic biofilm community was similar to the single enrofloxacin exposure. These results demonstrated the differences between single and combined exposures and provided a new theoretical basis to evaluate the harmful effects of enrofloxacin and microplastics on submerged macrophytes.

Microbial community niches on microplastics and prioritized environmental factors under various urban riverine conditions

Microplastics (MPs) provide habitats to microorganisms in aquatic environments; distinct microbial niches have recently been elucidated. However, there is little known about the microbial communities on MPs under urban riverine conditions, in which environmental factors fluctuate. Therefore, this study investigated MP biofilm communities under various urban riverine conditions (i.e., organic content, salinity, and dissolved oxygen (DO) concentration) and evaluated the prioritized factors affecting plastisphere communities. Nine biofilm-forming reactors were operated under various environmental conditions. Under all testing conditions, biofilms grew on MPs with decreasing bacterial diversity. Interestingly, biofilm morphology and bacterial populations were driven by the environmental parameters. We found that plastisphere community structures were grouped according to the environmental conditions; organic content in the water was the most significant factor determining MP biofilm communities, followed by salinity and DO concentration. The principal plastisphere communities were Proteobacteria, Bacteroidetes, Cyanobacteria, and Firmicutes phyla. In-depth analyses of plastisphere communities revealed that biofilm-forming and plastic-degrading bacteria were the predominant microbes. In addition, potential pathogens were majorly discovered in the riverine waters with high organic content. Our results suggest that distinct plastisphere communities coexist with MP particles under certain riverine water conditions, implying that the varied MP biofilm communities may affect urban riverine ecology in a variety of ways.

The distribution and ecological risks of antibiotics in the sediments from a diverging area of the bifurcated river: Effects of hydrological properties

The hydrodynamics in the diverging area become complicated because of the basin hydrological conditions, making the distribution of antibiotics largely uncertain and thus bringing uncertain ecological risks of antibiotics. Through field sampling, experiments and numerical simulations, the distribution of antibiotics, its responses to hydrological conditions were studied. Antibiotics in the bifurcated river sediments was mainly distributed in the branch mouth. The hydrodynamic regions were affected by the hydrological frequency. Notably, the center of the low-velocity area moved upstream and gradually expands to the entire tributary as the hydrological frequency shifted from high to low. ENRO (enrofloxacin) and OFC (ofloxacin) were the key hazardous antibiotics affecting the ecological health in the diverging area, and their concentrations are mainly affected by sediment particle size (D < 0.15 mm) and oxygen content. The ecological risk of antibiotics in the diverging area were gradually decreased with the increase of the distance from the central area. The water physical and chemical properties, altered by the river basin hydrological conditions, play an important role in influencing the distribution of antibiotic concentrations, and ultimately posing great threat to aquatic ecosystem. The research provides a scientific basis for antibiotic risk control in the diverging area under different hydrological conditions.

Ecotoxicological and health implications of microplastic-associated biofilms: a recent review and prospect for turning the hazards into benefits

Microplastics (MPs), over the years, have been regarded as a severe environmental nuisance with adverse effects on our ecosystem as well as human health globally. In recent times, microplastics have been reported to support biofouling by genetically diverse organisms resulting in the formation of biofilms. Biofilms, however, could result in changes in the physicochemical properties of microplastics, such as their buoyancy and roughness. Many scholars perceived the microplastic-biofilm association as having more severe consequences, providing evidence of its effects on the environment, aquatic life, and nutrient cycles. Furthermore, other researchers have shown that microplastic-associated biofilms have severe consequences on human health as they serve as vectors of heavy metals, toxic chemicals, and antibiotic resistance genes. Despite what is already known about their adverse effects, other interesting avenues are yet to be fully explored or developed to turn the perceived negative microplastic-biofilm association to our advantage. The major inclusion criteria for relevant literature were that it must focus on microplastic association biofilms, while we excluded papers solely on biofilms or microplastics. A total of 242 scientific records were obtained. More than 90% focused on explaining the environmental and health impacts of microplastic-biofilm association, whereas only very few studies have reported the possibilities and opportunities in turning the microplastic biofilms association into benefits. In summary, this paper concisely reviews the current knowledge of microplastic-associated biofilms and their adverse consequences and further proposes some approaches that can be developed to turn the negative association into positive.

Microplastisphere may induce the enrichment of antibiotic resistance genes on microplastics in aquatic environments: A review

Microplastics have been proven to be hotspots of bacterial pathogens and antibiotic resistance genes (ARGs). The enrichment of ARGs in microplastisphere, the specific niche for diverse microbial communities attached to the surface of microplastic, has attracted worldwide attention. By collecting 477 pairs of ARG abundance data belonging to 26 ARG types, based on the standardized mean difference (SMD) under the random effect model, we have performed the first meta-analysis of the ARG enrichment on microplastics in aquatic environments in order to quantitatively elucidate the enrichment effect, with comparison of non-microplastic materials. It was found that ARGs enriched on the microplastics were more abundant than that on the inorganic substrates (SMD = 0.26) and natural water environments (SMD = 0.10), but lower abundant than that on the natural organic substrates (SMD = -0.52). Furthermore, microplastics in freshwater tended to have a higher degree of ARG enrichment than those in saline water and sewage. The biofilm formation stage, structure, and component of microplastisphere may play a significant role in the enrichment of ARGs.

Interactions of microplastics with organic, inorganic and bio-pollutants and the ecotoxicological effects on terrestrial and aquatic organisms

As emerging contaminants, microplastics (MPs) have attracted global attention. They are a potential risk to organisms, ecosystems and human health. MPs are characterized by small particle sizes, weak photodegradability, and are good environmental carriers. They can physically adsorb or chemically react with organic, inorganic and bio-pollutants to generate complex binary pollutants or change the environmental behaviors of these pollutants. We systematically reviewed the following aspects of MPs: (i) Adsorption of heavy metals and organic pollutants by MPs and the key environmental factors affecting adsorption behaviors; (ii) Enrichment and release of antibiotic resistance genes (ARGs) on MPs and the effects of MPs on ARG migration in the environment; (iii) Formation of "plastisphere" and interactions between MPs and microorganisms; (iv) Ecotoxicological effects of MPs and their co-exposures with other pollutants. Finally, scientific knowledge gaps and future research areas on MPs are summarized, including standardization of study methodologies, ecological effects and human health risks of MPs and their combination with other pollutants.

Bioaccessibility of Microplastic-Associated Antibiotics in Freshwater Organisms: Highlighting the Impacts of Biofilm Colonization via an In Vitro Protocol

Microplastics in the environment can be colonized by microbes capable of forming biofilms, which may act as reactive coatings to affect the bioaccessibility of pollutants in organisms. This study investigated the dynamic evolution of biofilm colonization on microplastics and its impacts and mechanisms on the bioaccessibility of microplastic-associated sulfamethazine (SMT) via microcosm incubation in surface water and sediment. After 60 days of incubation, the microbial communities formed in microplastics were distinct and more diverse than those untethered in surroundings, and photoaging treatment decreased the affinity of biofilms on microplastics due to decreased hydrophobicity. Biofilm formation further enhanced the desorption and bioaccessibility of microplastic-sorbed SMT in organisms. In vitro experiments indicated that the critical effects were mainly related to the stronger interaction of gastrointestinal components (i.e., pepsin, bovine serum albumin (BSA), and NaT) with biofilm components (e.g., extracellular polymer substances) than with the pure surface of microplastics, which competed for binding sites in microplastics for SMT more significantly. Photoaging decreased the enhancing effects of biofilms due to their lower accumulation in aged microplastics. This study is the first attempt to reveal the role of biofilms in the bioaccessibility of microplastics with associated antibiotics and provide insights into the combined risk of microplastics in the environment.

Ecological responses of coral reef to polyethylene microplastics in community structure and extracellular polymeric substances

The relationships and interactions between extracellular polymeric substances (EPS) and microplastics (MPs) in coral reef ecosystems were symmetrically investigated. The current study aims to investigate the responses of scleractinian coral (Goniopora columna) to exposure of model MPs, exemplified by polyethylene (PE), in the size range of 40-48 μm as affected by MPs concentration of MP in the range between 0 and 300 mg L^-1 for 14 days. The structure of EPS-associated microbial community was studied using a series of techniques including high-throughput sequencing of 16 S rRNA, transmission electron microscopy (TEM), hydrodynamic diameter, surface charge (via zeta potential), X-ray diffraction (XRD), attenuated total reflectance‒Fourier transform infrared (ATR‒FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), and fluorescence excitation-emission matrix (FEEM) spectroscopy. Microbial interactions between PE-MPs and coral caused aggregation and formation of EPS matrix, which resulted in increase and decrease in the relative abundance of Donghicola (Proteobacteria phylum) and Marivita (Proteobacteria phylum) in PE-MP-associated EPS, respectively. Particle size, electrostatic interactions, and complexation with the functional groups of the EPS-based matrix affected the humification index. FEEM spectroscopy analyses suggested the presence of humic- and fulvic-like fluorophores in EPS and dissolved organic matter (DOM) in PE-MP-derived DOM. The findings provided insights into the potential environmental implications of coral-based EPS and co-existing microbial assemblages due to EPS-PE-MP-microbiome interactions throughout the dynamic PE-MP exposure process.

Induced aging, structural change, and adsorption behavior modifications of microplastics by microalgae

The effects of microalgal biofouling on microplastic (MP) may differ from bacterial biofouling. In this study, the influence of microalgae on MP surface alteration, structural change, and adsorption of organic micropollutants was evaluated. Virgin polyethylene (PE), polyvinyl chloride (PVC), and polyamide (PA) were each immersed in algal photobioreactor and river freshwater for 30 days to simulate algal and river microbe biofouling respectively. Consequently, their physicochemical changes and adsorption potential of a mixture of six bisphenol analogues (BPA, BPS, BPE, BPB, BPF, BPAF) and two parabens (propyl-paraben, benzyl-paraben) were investigated. Owing to the algal bioactive compounds, major microalgae-induced biofouling and more MP aging than the river microbe aging were observed through fractures, pits, cracks, and algal attachments. Intrusion of algal organic matter and scission of polymeric functional groups were revealed during microalgal immersion and the potential MP aging pathways were proposed. Algal biofouling considerably altered the intrinsic properties of the MPs, consequently the adsorption capacity of PE and PVC was enhanced by 3.04-6.72 and 2.14-8.72 times, respectively. Adsorption process onto algal-aged MPs was pH-dependent, endothermic, non-spontaneous, and favored by hydrogen bonds. Meanwhile, the amide group in PA structure was conducive to organic micropollutant adsorption, which was likely reduced by algal aging and the erosion of the N-H stretching. Moreover, higher adsorption capacities of organic micropollutants were shown by the algal-biofilm PE and PVC than virgin and river microbial biofilm MPs. This study discloses that, biofouling and aging of MPs by microalgae through their bioactive components would engender more incidences on MP properties, organic micropollutants adsorption with associated environmental and health hazards.

Incubation habitats and aging treatments affect the formation of biofilms on polypropylene microplastics

Microbial colonization and biofilm formation associated with microplastics (MPs) have recently attracted wide attention. However, little is known about the effect of MP aging and different exposed habitats on biofilm formation and associated microbial community characteristics. To obtain a comprehensive understanding, virgin and aged polypropylene MPs were selected as attachment substrates and exposed to different aquatic habitats (marine, estuary, and river). The results showed that the aging process could destroy surface structure and increase oxygen-containing groups of MPs. The total biomass of the biofilms, attached-bacterial OTU numbers, and α diversities increased with exposure time. The biofilms biomass and α diversity of MPs in the river were significantly higher than those in the marine and estuary habitats, and temperature and salinity were primary factors affecting microbial colonization. Bacterial communities in MP-attached biofilms were significantly different from those in surrounding water. Microorganisms tend to adhere to aged MPs, and especially, genes related to human pathogens were significantly expressed on aged MPs, suggesting a potential ecological and health risk of aged MPs in aquatic ecosystems. Our results showed that aged MPs and different habitats have an important influence on microbial colonization, and the weathering process can accelerate biofilm formation on MPs.

Influence of biofilms on the adsorption behavior of nine organic emerging contaminants on microplastics in field-laboratory exposure experiments

Microplastics (MPs) are ubiquitous in aquatic environments, which are important carriers of emerging contaminants (ECs). Biofilms can be attached to the surface of MPs in a natural aquatic environment, which may influence chemical adsorption; however, knowledge of its impact is still limited. This study investigated the effect of biofilms on MPs on the adsorption of ECs through field-laboratory exposure experiments. Three types of MPs were naturally colonized with biofilms in lake. Then, biofilm-absent/biofilm-attached MPs were exposed to nine EC solutions at a concentration of 8 μg/L of each compound in laboratory. Most compounds exhibited 3.8 times lower concentrations on biofilm-attached MPs than on biofilm-absent MPs; only a few compounds showed enhanced adsorption. Pseudo-equilibrium was achieved within 72 h based on adsorption kinetics, implying fast adsorption of ECs on biofilm-attached MPs. The partition coefficients (K_d) for biofilm-attached MPs were 0.14 (diclofenac) to 535 (miconazole) L/kg and were positively correlated with octanol/water partition coefficients (K_ow). This indicated that chemical properties (such as K_ow) of the compounds determined their final adsorption amounts on MPs, although these were influenced by the presence of the biofilm. Hence, multiple influencing factors should be considered when evaluating the carrier potential of MPs for ECs in aquatic environments.

Alteration in microbial community and antibiotic resistance genes mediated by microplastics during wastewater ultraviolet disinfection

Microplastics (MPs) could be as a vector to colonize microorganisms and antibiotic resistance gene (ARGs) in surface water. However, little information is known regarding their changes by the presence of MPs in wastewater treatment. Here, the effects of different concentrations and sizes of polystyrene microplastics (PSMPs) on the distribution and removal of microbial communities and ARGs under ultraviolet disinfection of urban sewage have been systematically studied. Results showed that the presence of MPs altered abundance and functions of microorganisms in wastewater, despite different effects on different types of microorganisms. The most abundant ARGs in original disinfection tank sewage was rpoB2 (6.34%). A certain concentration range of MPs can improve the ability of specific types of ARGs in the UV disinfection process. Compared to the system without PSMPs, the content of Deinococcus-Thermus and Bacteroidetes phylum increased, while Actinobacteria and Proteobacteria phylum decreased in the presence of MPs. The microbial functions, especially the genetic information processing and metabolism were altered by the presence of PSMPs. In addition, PSMPs altered the content of ARGs, where the contents of OXA-182 and ErmH were increased, while adeF and ANT3-Iic were decreased. PSMPs also decreased the free ARB content in wastewater by providing colonization sites. The UV disinfection efficiency of microorganisms and ARGs was also intervened by PSMPs since they provided colonization sites and increased the water turbidity. The findings indicated that PSMPs altered the distribution and removal of microbial community and ARGs in ultraviolet disinfection of wastewater, highlighting the combined risks.

Plastic Interactions with Pollutants and Consequences to Aquatic Ecosystems: What We Know and What We Do Not Know

Plastics are a group of synthetic materials made of organic polymers and some additives with special characteristics. Plastics have become part of our daily life due to their many applications and uses. However, inappropriately managed plastic waste has raised concern regarding their ecotoxicological and human health risks in the long term. Due to the non-biodegradable nature of plastics, their waste may take several thousands of years to partially degrade in natural environments. Plastic fragments/particles can be very minute in size and are mistaken easily for prey or food by aquatic organisms (e.g., invertebrates, fishes). The surface properties of plastic particles, including large surface area, functional groups, surface topography, point zero charge, influence the sorption of various contaminants, including heavy metals, oil spills, PAHs, PCBs and DDT. Despite the fact that the number of studies on the biological effects of plastic particles on biota and humans has been increasing in recent years, studies on mixtures of plastics and other chemical contaminants in the aquatic environment are still limited. This review aims to gather information about the main characteristics of plastic particles that allow different types of contaminants to adsorb on their surfaces, the consequences of this adsorption, and the interactions of plastic particles with aquatic biota. Additionally, some missing links and potential solutions are presented to boost more research on this topic and achieve a holistic view on the effects of micro- and nanoplastics to biological systems in aquatic environments. It is urgent to implement measures to deal with plastic pollution that include improving waste management, monitoring key plastic particles, their hotspots, and developing their assessment techniques, using alternative products, determining concentrations of micro- and nanoplastics and the contaminants in freshwater and marine food-species consumed by humans, applying clean-up and remediation strategies, and biodegradation strategies.

Microplastics benefit bacteria colonization and induce microcystin degradation

Microplastics (MPs) can sorb toxic substances and be colonized by microorganisms. However, the interactions between the adsorbed toxic substances and the MPs biofilm remains inadequately understood. Here, a 37-days microcosm experiment was conducted to investigate the influence of polystyrene microplastics (PS-MPs) on microcystin (MC-LR) behavior in turbulent scenarios. The results revealed that adsorption by PS-MPs was the primary process that led to a quick reduction of aquatic MC-LR concentrations. With the colonization of microorganisms on the PS-MPs, the attached biofilm altered the surface properties of PS-MPs, which enhanced the bio-adsorption of MC-LR. Meanwhile, microcystins degrading bacteria, such as Sphingomonadaceae and Methylophilaceae, inhabited in the biofilm, which facilitated the MC-LR biodegradation; this was also demonstrated by the identified MC-LR degradation products. Thus, the MC-LR concentration in water was constantly decreased, with a maximum removal capability of 35.8% in PS-MPs added groups. In addition, a 25% reduction of MC-LR was recorded in PS-MPs added static water. This suggested that the interaction between PS-MPs, biofilm, and MC-LR may be prevalent in natural waters. Our results indicate MPs as vectors for toxic substances could be a double-edged sword (adsorption and biodegradation), which provides new insights for understanding the ecological risks of microplastics.

What Are Lake Beaches Made of? An Assessment of Plastic Beach Litter on the Shores of Como Bay (Italy)

Plastic waste dispersion is a well-recognized environmental threat, despite continuous efforts towards improving waste disposal management over the last few decades. Plastic litter is known to strongly impact upon water bodies and shorelines, affecting the health of ecosystems and impacting upon the aesthetic value of sites. Moreover, plastic waste that is abandoned on beaches contributes towards different degradation processes that potentially lead to the formation of secondary microplastics (MPs), with likely cascade effects upon the whole ecosystem. In this view, this study aims to characterize the plastic beach litter found on the shores of the western basin of Como Lake (Italy) to better understand the origin of MPs in littoral sediments, including the recognition of object typologies and the chemical characterization of polymers using Fourier-transformed infrared analysis (FTIR). The results highlighted that the most abundant polymers on beaches are polypropylene (PP) and polyethylene (PE), representing 73% of the collected polymers. This confirms that floating, low-density polymers are more likely to accumulate on beaches. Moreover, almost 66% of litter is represented by commonly used manufactured items (disposable objects, packaging, and everyday items). This evidence, combined with the analysis of the main environmental features of the sampling sites (the main winds, distance to urban areas, and the presence of tributaries) indicate that abundance of beached litter is mainly linked to beach accessibility and the local winds. These results highlight that multiple factors affect the environmental fate of plastic litter and give insights into the assessment of secondary microplastics in beach sediments.

Effect of particle size on the colonization of biofilms and the potential of biofilm-covered microplastics as metal carriers

Upon release into the aquatic environment, the surface of microplastics (MPs) can be readily colonized by biofilms, which may enhance the adsorption of contaminants. In this study, industrial-grade polystyrene (PS) of about 4 mm in size (MP4000-1), food-grade PS of about 4 mm in size (MP4000-2), and Powder PS of about 75 μm in size (MP75) were co-cultured with a model freshwater fungus, namely Acremonium strictum strain KR21-2, for seven days to form biofilms on their surface. We also determined the changes in surface physicochemical properties of the biofilm-covered MPs (BMPs) and the heavy metal adsorption capacity of the original MPs and BMPs. The results revealed that the biofilms improve the adsorption of heavy metals on MPs, and the particle size of MPs plays a crucial role in biofilm colonization and adsorption of heavy metals by BMPs. MP75 can carry more biofilm on its surface than that of the two MP4000s and form heteroaggregates with biofilms. In addition, there were more functional groups on the surface of BMP75 than on the surface of the two BMP4000s, which could promote the electrostatic interaction and chemical association of heavy metals. Moreover, BMP75 exhibited a higher capacity to adsorb Cu and reduce Cr (VI), which may be related to the functional groups in its biofilm. Overall, this study showed that after biofilms colonization, BMPs of smaller size have more significant potential as a metal vector, and the particle size deserves more scientific attention during the risk assessment.

Association of zoonotic protozoan parasites with microplastics in seawater and implications for human and wildlife health

Plastics are widely recognized as a pervasive marine pollutant. Microplastics have been garnering increasing attention due to reports documenting their ingestion by animals, including those intended for human consumption. Their accumulation in the marine food chain may also pose a threat to wildlife that consume species that can accumulate microplastic particles. Microplastic contamination in marine ecosystems has thus raised concerns for both human and wildlife health. Our study addresses an unexplored area of research targeting the interaction between plastic and pathogen pollution of coastal waters. We investigated the association of the zoonotic protozoan parasites Toxoplasma gondii, Cryptosporidium parvum, and Giardia enterica with polyethylene microbeads and polyester microfibers. These pathogens were chosen because they have been recognized by the World Health Organization as underestimated causes of illness from shellfish consumption, and due to their persistence in the marine environment. We show that pathogens are capable of associating with microplastics in contaminated seawater, with more parasites adhering to microfiber surfaces as compared with microbeads. Given the global presence of microplastics in fish and shellfish, this study demonstrates a novel pathway by which anthropogenic pollutants may be mediating pathogen transmission in the marine environment, with important ramifications for wildlife and human health.

Identification and Quantification of Microplastics in Effluents of Wastewater Treatment Plant by Differential Scanning Calorimetry (DSC)

In this research, the presence of microplastics was detected through a differential scanning calorimetry (DSC) analysis of three wastewater treatment plants. One of these plants applied only a preliminary treatment stage while the others applied up to a secondary treatment stage to evaluate their effectiveness. The results showed the presence of polyethylene (PE), polystyrene (PS), polypropylene (PP) and polyethylene terephthalate (PET), which were classified as fragments, fibers or granules. During the evaluation of the plants, it was determined that the preliminary treatment did not remove more than 58% of the microplastics, while the plants applying up to a secondary treatment with activated sludge achieved microplastic removal effectiveness between 90% and 96.9%.

Degradation of plastics associated with the COVID-19 pandemic

The ongoing COVID-19 pandemic has resulted in an unprecedented form of plastic pollution: personal protective equipment (PPE). Numerous studies have reported the occurrence of PPE in the marine environment. However, their degradation in the environment and consequences are poorly understood. Studies have reported that face masks, the most abundant type of PPE, are significant sources of microplastics due to their fibrous microstructure. The fibrous material (mostly consisting of polypropylene) exhibits physical changes in the environment, leading to its fracture and detachment of microfibers. Most studies have evaluated PPE degradation under controlled laboratory conditions. However, in situ degradation experiments, including the colonization of PPE, are largely lacking. Although ecotoxicological studies are largely lacking, the first attempts to understand the impact of MPs released from face masks showed various types of impacts, such as fertility and reproduction deficiencies in both aquatic and terrestrial organisms.

Negative food dilution and positive biofilm carrier effects of microplastic ingestion by D. magna cause tipping points at the population level

Ingestion of microplastics by aquatic organisms is often harmful due to the dilution of their regular food with low-calorie microplastic particles, but can also be beneficial if nutritious biofilms are present on the microplastic surface. This begs the question: is ingestion of microplastic harmful or beneficial and can the net effect of the two mechanisms be quantified? Here, we quantified these harmful and beneficial effects on Daphnia magna, using dose-response tests with clean and biofouled microplastic respectively, and determined the trade-off between these counteracting effects. A population model was developed to calculate the isoclines for zero population growth, separating the regime where adverse food dilution dominated from that where the beneficial biofilm vector mechanism dominated. Our results show that the organisms grew better when exposed to biofouled microplastic compared to pristine microplastic. Very good model predictions (R² = 0.868-0.991) of the effects of biofouled microplastic were obtained based on literature parameter values, with optimization required only for the two sub-model parameters driving the dose-effect relationships for pristine microplastic. These results contradict previous sudies were only pristine microplastic were used and demonstrate that the ruling paradigm of unambiguously adverse microplastic effects is not ecologically justifiable.