Photochemistry of Dissolved Black Carbon Released from Biochar: Reactive Oxygen Species Generation and Phototransformation

Pyrogenic dissolved organic matter produced at higher temperature is more photoactive: Insight into molecular changes and reactive oxygen species generation

Pyrogenic dissolved organic matter (pyDOM) is the photolabile fraction in the dissolved organic matter pool. However, the molecular changes and reactive oxygen species generation of pyDOMs under continuous irradiation, and how these vary with feedstock type and pyrolysis temperature, are not well understood. In this study, the soluble fractions of 300 and 450 ºC biochars (pyDOM300 and pyDOM450) were subjected to photo-irradiation. PyDOM450 was of higher aromaticity, molecular variety, but lower unsaturation than pyDOM300. The molecular weight, aromaticity, and double bond equivalents of pyDOMs generally decreased after photo-irradiation. The degradation pattern of pyDOMs can be divided into two stages. In the initial 24 h, pyDOM300 degraded faster than pyDOM450, with the more profound transformation of condensed aromatics and carbohydrate into aliphatic/proteins, lignins, and tannins in pyDOM300. After 720 h irradiation, however, the degradation ratio of pyDOM450 (36.2-43.9%) exceeded that of pyDOM300 (23.7-30.3%), with the initially preserved condensed aromatics in pyDOM450 further transforming into aliphatic/proteins and tannins. This was potentially attributed to the generation of more reactive oxygen species (·OH and ¹O₂) in pyDOM450. This study uncovered the photodegradation mechanisms of pyDOMs at molecular scale and helped to understand their cycling and effects on environment.

Radical chemistry of dissolved black carbon under sunlight irradiation: quantum yield prediction and effects on sulfadiazine photodegradation

Dissolved black carbon (DBC) is regarded as an important part of the natural organic matter pool. However, it is unclear about DBC's photochemical activity and the relationships between reactive intermediates (RIs) and the molecular structure of DBC remain unclear. In this study, we investigate the photochemical formation ability of RIs and spectral parameters (E2/E3, S275-295) of DBC made from five types of plants at five pyrolysis temperatures. The results showed that there were good linear regressions between the RI quantum yields and the spectral parameters (E2/E3, S275-295), and this was indicative of the RI generation prediction from DBC under solar irradiation. The DBC-mediated photochemical experiment of sulfadiazine revealed that 3DBC* was the primary active species for the indirect photodegradation of sulfadiazine. Further studies indicated that a linear relationship was observed between the indirect photodegradation ability of sulfadiazine induced directly by 3DBC* at different pyrolysis temperatures and the 3DBC* quantum yields or E2/E3. These findings indicate that the simple models of the RI quantum yield as a function of spectral parameters can be used to evaluate the degradation of pollutants with known DBC spectral parameters.

Early structural and functional changes in Baikal Sculpin gills exposed to suspended soot microparticles in experiment

The toxic influence of soot microparticles on terrestrial organisms has been well studied, although there is scarce data on how microparticles could affect hydrobionts. We performed a first-ever study of the short-term (5 days) impact of furnace soot (0.005 g/L) on the structural and functional features of gill cells in the Baikal Sculpin species Paracottus knerii, Dybowski, 1874. The soot samples used in the experiment were composed of small (10-100 nm) particles and larger (up to 20 μm) aggregates. The dominant fractions of the polycyclic aromatic hydrocarbons of these microparticles were phenanthrene, fluoranthene, pyrene, benzo[a]anthracene, chrysene, benzofluoranthenes, benzopyrenes, indeno[1,2,3-c,d]pyrenes, and benzo[ghi]perylene. Trace element analysis of the soot detected the presence of C, S, Si, Al, Ca, K, Mg, P, and Fe. The gill condition was assessed with electron scanning, transmission, and laser confocal microscopy. Soot induces degenerative changes in the macrostructure and surface of secondary lamellae and increases mucus production in fish gills. A decrease in mitochondrial activity, an increase in reactive oxygen species production, and an increase in the frequency of programmed cell death in gill epithelium were observed under the influence of soot. In chloride cells, an induction of macroautophagy was detected. In general, the changes in fish gills after the short-term influence of soot microparticles indicate the stress of respiratory and osmotic regulation systems in fish. The data obtained are important for forming a coherent picture of the impact of soot on hydrobionts and for developing bioindication methods for evaluating the risks of their influence on aquatic ecosystems.

Comparing Photoactivities of Dissolved Organic Matter Released from Rice Straw-Pyrolyzed Biochar and Composted Rice Straw

Here, we systematically compared the photoactivity and photobleaching behavior between dissolved black carbon (DBC) from rice straw biochar and leached dissolved organic carbon (LDOC) from rice straw compost using complementary techniques. The Fourier transform-ion cyclotron resonance mass spectrometry (FT-ICR MS) analysis showed that DBC was dominated by polycyclic aromatic (55.1%) and tannin-like molecules (24.1%), while LDOC was dominated by lignin-like (58.9%) and tannin-like molecules (19.7%). Under simulated sunlight conditions, DBC had much higher apparent quantum yields for ³DOM* and ¹O₂ but much lower apparent quantum yields for ^•OH than LDOC. After a 168 h irradiation, the total number of LDOC formulas identified by FT-ICR MS decreased by 40.1% with concurrent increases in O/C and H/C ratios and also decreases in double bond equivalence minus oxygen (DBE - O) and average molecular weight identified by gel permeation chromatography. However, despite the large decreases in UVA₂₅₄ and DOC, the total number of DBC formulas decreased only by 12.0% with nearly unchanged O/C ratio, DBE - O values, molecular weight distribution, and benzenepolycarboxylic aromatic condensation (BACon) index regardless of the decreased percentage of condensed aromatic carbon (ConAC %). Compared with LDOC, the photolysis of DBC was much less oxidative and destructive mainly via breakup of a small portion of the highly condensed aromatic rings, probably accompanied by photodecarboxylation.

Long-term immobilization of soil metalloids under simulated aging: Experimental and modeling approach

Aging is an inevitable natural process, leading to faded performances of soil amendments. Understanding long-term aging features is crucial for the risk management of contaminated soil. In this study, a novel quantitative aging method, namely, the "soil coin" method, was developed, which can simulate the effects of natural aging on metal(loid) immobilization performances. To better depict the aging features, two models on the basis of conditional probability-induced failure were developed. To effectively immobilize soil arsenic (As) and antimony (Sb), magnesium (Mg) and iron (Fe) oxides were simultaneously introduced to either fresh or pre-oxidized biochar via a facile method. Although post-application aging is harmful, pre-aging (i.e., pre-oxidation using H₂O₂) in turn served as an effective means to introduce more metal oxides, thereby rendering better short-term and long-term effectiveness for metalloid immobilization. Experimental and modeling approaches suggested that precipitation accounted for long-term immobilization, while a constant aging rate is the key feature for a promising soil amendment. It is suggested that to further calibrate this method and better understand the immobilization performances in the long run, more evidence from the field is needed.

Design of Z-scheme g-C3N4/BC/Bi25FeO40 photocatalyst with unique electron transfer channels for efficient degradation of tetracycline hydrochloride waste

High electron transfer rates and a higher number of electron transfer active sites play important roles in inhibiting the recombination of photogenerated electron-hole pairs. In the experiments described in this article, the g-C₃N₄/BC/Bi₂₅FeO₄₀ composite material was prepared to use biochar (BC) as the conductive channel. The presence of BC significantly increases the electron transfer rate due to its excellent electrical conductivity and can provide more electron transfer active sites. At the same time, BC provides a larger surface area and has a loose porous structure, which lead to excellent adsorption performance. Based on various characterization results, it was confirmed that the Z-scheme heterojunction was successfully constructed between g-C₃N₄ and Bi₂₅FeO₄₀. The photocatalytic experiment results showed that the degradation efficiency of g-C₃N₄/BC/Bi₂₅FeO₄₀ on the tetracycline hydrochloride (TCH) could reach 92.2% within 60 min. Parameters such as circulation stability, pH value of the solution and the amount of composite materials were studied. The synthesized composite material has good reusability and high efficiency in a wide pH range of 3-11. Its excellent photocatalytic activity is attributed to the formation of an effective Z-scheme heterostructure, as well as the rapid photoelectron transfer and excellent adsorption capacity of BC. This work provides a way to design new photocatalysts using semiconductor composite materials and BC materials.

Molecular characteristics of biochar-derived organic matter sub-fractions extracted by ultrasonication

Biochar-derived organic matter is key to carbon dynamics and pollutant transport in soils remediated by biochar. A limited understanding of the molecular composition of biochar-derived organic matter limits the ability to accurately predict the chemical cycle within soil and how biochar-derived organic matter will interact with contaminants. To describe the relatively comprehensive structure information of soybean straw biochar-extractable organic matter (BEOM) at the molecular level, we used solvents of different polarities, namely, petroleum ether (PE), carbon disulfide (CS₂), methanol (CH₃OH) and acetone (CH₃COCH₃), to extract organic samples from soybean straw biochar and used Fourier transform ion cyclotron resonance mass spectrometry (FTICR MS) for analysis. We found that a high percentage of unique molecular formulas were extracted by each solvent. This molecular diversity is mainly due to variance in solvent polarity and various intermolecular bonds destroyed by different solvents. The molecular signatures of the sub-fractions reveal that some recalcitrant BEOM sub-fractions will be easily released in the environment and preserved for a long time in the soil environment, while the majority of the labile BEOM sub-fractions tend to be preserved in the biochar itself. In addition, the most readily available organic N and S in biochar will be primarily released. These results reveal that biochar could provide nutrients efficiently and maintain soil organic carbon over the long term, suggesting that biochar is a promising material for soil improvement. By using high-resolution mass spectrometry, we revealed the BEOM signature at the molecular level in various possible environmental processes, which provides a theoretical basis for further research on the interactions between BEOM and organic contaminants.

The photodegradation processes and mechanisms of polyvinyl chloride and polyethylene terephthalate microplastic in aquatic environments: Important role of clay minerals

It is well known that microplastics (MPs) may experience weathering and aging under ultraviolet light (UV) irradiation, but it remains unclear if these processes are impacted by natural components, such as clay minerals. In this study, we systematically investigated the photodegradation behaviors of polyvinyl chloride (PVC) and poly (ethylene terephthalate) (PET), two utmost used plastics, in the presence of clay minerals (kaolinite and montmorillonite). The results demonstrated that the clay minerals, particularly kaolinite, significantly promoted the MPs photodegradation, and the aging of PET was more prominent. The photodegradation was the most distinct at pH 7.0, regardless of the presence or absence of the clay minerals. The results of electron paramagnetic resonance and inhibition experiments of reactive oxygen species indicated that the minerals, particularly kaolinite, remarkably facilitated production of •OH, which was the key species contributing to the photodegradation of MPs. Specifically, UV irradiation facilitated the photo-ionization of MPs, producing hydrated electrons and MP radical cations (MP⁺). The Lewis base sites prevalent on the clay siloxane surfaces could stabilize the MP radical cations and prevent their recombination with hydrated electrons, which promoted the generation of •OH under aerobic conditions, and facilitated the degradation of MP. Two-dimensional (2D) Fourier transformation infrared (FTIR) correlation spectroscopy (COS) analysis and ultra-high-performance liquid chromatography coupled to a Q Exactive Orbitrap HF mass spectrometer were used to identify the sequential changes of functional groups, and the degradation products of the MPs. This study improves our understanding on the aging of MPs in the complex natural environment.

Mechanisms for the dissolved biochar promoted iron dissolution and consequential chromium release

Biochar is widely applied in soil for agricultural and environmental purposes. Soluble fraction of biochar may be released from bulk biochar as dissolved biochar (DBC) after irrigation or rainfall. DBC had been reported to possess high chemical activity in aqueous system, while less attention was paid to the impact of DBC on the soil environmental processes. In this work, the impact of DBC on ferric (hydro) oxides was systematically examined. Our study showed that DBC prepared from rice straw could significantly promote the dissolution of ferric oxides with unstable and metastable crystalline structures, e.g., ferrihydrite under relatively acidic condition. Organic ligand-promoted dissolution was the main mechanism for iron release from ferrihydrite, and the low-molecular-weight DBC component (less than 1000 Da) was the major contributor for this process. Furthermore, the organic carbon content normalized ligand-promoted dissolution capacity for DBC was much higher than common dissolved organic matters. More importantly, DBC could promote the release of Cr from dichromate-adsorbed ferric mineral. Our results suggest that in soils with relatively low pH and high contents of ferric hydroxides, e.g., red soil in southern China, DBC derived from applied biochar could enhance the mobility and bioavailability of iron and other heavy metals. The dissolved metals would play active roles in soil redox cycle and biotic processes. Therefore, it's necessary to evaluate the long-term impact of biochar application on acidic field soils with high iron content.

Estimation of the biogeochemical reactivities of dissolved organic matter from modified biochars using color

Modified biochar is widely used as a soil amendment in agricultural systems to improve crop yields and remove environmental pollutants. The water-soluble fraction of biochar, called biochar-derived dissolved organic matter (DOM_BC), is the most active biochar component. However, the correlation between the optical properties of DOM_BC and its biogeochemical activity remain unclear. In this study, one biochar and six modified derivatives were used to extract DOM_BC and characterize its optical properties. The biogeochemical reactivities of DOM_BC were determined using biodegradation, photodegradation, and electron-donating capacity assays. The results show that modification changes the biochar characteristics, leading to a variety of DOM_BC properties. The DOM_BC from modified biochars degrades more rapidly than the original biochar. On the other hand, modification reduces the redox functional groups in DOM_BC, resulting in a lower electron-donating capacity of DOM samples. However, the modifications did not seem to affect photodegradation. Not all spectral parameters provide information about the correlations between the DOM_BC properties and biogeochemical reactivity. However, two fundamental properties, that is, the specific UV absorbance at 254 nm (SUVA₂₅₄, showing aromaticity) and spectral slopes over the ranges of 275-295 nm of the UV absorbance (S_275-295, showing molecular weight), are the dominant factors affecting the biodegradation and electron-donating capacities of DOM_BC. In this study, a rapid and straightforward method is presented, which can be used to characterize DOM_BC and predict the reactivity of biochar that is used as an environmental amendment to minimize toxic organic compounds.

A critical review on the application of biochar in environmental pollution remediation: Role of persistent free radicals (PFRs)

Biochar as an emerging carbonaceous material has exhibited a great potential in environmental application for its perfect adsorption ability. However, there are abundant persistent free radicals (PFRs) in biochar, so the direct and indirect PFRs-mediated removal of organic and inorganic contaminants by biochar was widely reported. In order to comprehend deeply the formation of PFRs in biochar and their interactions with contaminants, this paper reviews the formation mechanisms of PFRs in biochar and the PFRs-mediated environmental applications of biochar in recent years. Finally, future challenges in this field are also proposed. This review provides a more comprehensive understanding on the emerging applications of biochar from the viewpoint of the catalytic role of PFRs.

Plastic Formulation is an Emerging Control of Its Photochemical Fate in the Ocean

Sunlight exposure is a control of long-term plastic fate in the environment that converts plastic into oxygenated products spanning the polymer, dissolved, and gas phases. However, our understanding of how plastic formulation influences the amount and composition of these photoproducts remains incomplete. Here, we characterized the initial formulations and resulting dissolved photoproducts of four single-use consumer polyethylene (PE) bags from major retailers and one pure PE film. Consumer PE bags contained 15-36% inorganic additives, primarily calcium carbonate (13-34%) and titanium dioxide (TiO₂; 1-2%). Sunlight exposure consistently increased production of dissolved organic carbon (DOC) relative to leaching in the dark (3- to 80-fold). All consumer PE bags produced more DOC during sunlight exposure than the pure PE (1.2- to 2.0-fold). The DOC leached after sunlight exposure increasingly reflected the ¹³C and ¹⁴C isotopic composition of the plastic. Ultrahigh resolution Fourier transform ion cyclotron resonance mass spectrometry revealed that sunlight exposure substantially increased the number of DOC formulas detected (1.1- to 50-fold). TiO₂-containing bags photochemically degraded into the most compositionally similar DOC, with 68-94% of photoproduced formulas in common with at least one other TiO₂-containing bag. Conversely, only 28% of photoproduced formulas from the pure PE were detected in photoproduced DOC from the consumer PE. Overall, these findings suggest that plastic formulation, especially TiO₂, plays a determining role in the amount and composition of DOC generated by sunlight. Consequently, studies on pure, unweathered polymers may not accurately represent the fates and impacts of the plastics entering the ocean.

Novel Insights into the Molecular-Level Mechanism Linking the Chemical Diversity and Copper Binding Heterogeneity of Biochar-Derived Dissolved Black Carbon and Dissolved Organic Matter

Biochar-derived dissolved black carbon (DBC) varies in chemical composition and significantly affects the environmental fate of metal ions. However, the intrinsic molecular composition of DBC fractions and their molecular interaction mechanisms with metal ions remain unclear. We propose a novel, molecular-level covariant binding mechanism to comparatively interpret the heterogeneities, active sites, and sequential responses of copper binding with molecular compounds in DBC and natural dissolved organic matter (DOM). Relatively large proportions of lipid/aliphatic/peptide-like compounds with low mass distributions and lignin-like compounds with oxidized/unsaturated groups existed in acidic- and alkaline-extracted DBC, respectively. A larger percentage of tannin-like/condensed aromatic compounds and higher average conditional stability constants (logK̅_Cu) of visible fluorescent components were found for DOM than for DBC. Overall, 200-320 Da and 320-480 Da molecular components contributed significantly to the logK̅_Cu values of UVA and visible fluorescent components, respectively, in DBC/DOM. Nitrogenous groups likely exhibited stronger binding affinities than phenolic/carboxylic groups. The sequential copper-binding responses of molecular compounds in DBC/DOM generally followed the order lipid/aliphatic/peptide-like compounds → tannin-like compounds → condensed aromatic compounds. These insights will improve the prediction of the potential effects of DBC on various contaminants and the risks of biochar application to ecosystems.

Interfacial reaction between organic acids and iron-containing clay minerals: Hydroxyl radical generation and phenolic compounds degradation

Reactive oxygen species, especially hydroxyl radicals (OH), exert a distinguished role in the transformation of contaminants, and their in-situ generation attracts wide attentions in environmental and geochemical areas. The present work explored the potential formation of OH during the interactions between iron-containing clay minerals and environmentally prevalent organic acids in dark environments. The results demonstrated that the accumulative OH concentrations were related to the solution pH, the types of clay minerals, and the nature of organic acid species. At pH 5.5, 1.2- 15.2 times of OH were generated from the reduction of Na-nontronite-2 (Na-NAu-2) compared with other clay minerals in the presence of ascorbic acid (AA) at 144 h. X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR) analyses indicated that Fe(III) was reduced to Fe(II) by AA during OH formation. Meanwhile, chemical probe tests coupled with quenching experiments confirmed the generation of H₂O₂ and superoxide radical (O₂^-), which participated in the formation of OH. The produced OH/O₂^- can transform 68.4%, 86.4%, and 50.1% of phenol, p-nitrophenol, and 2,4-dichlorophenol within 168 h in AA-Na-NAu-2 suspension, respectively. This work provides valuable insights into OH production in the mutual interaction between organic acids and iron-bearing clays, which is helpful for the development of a new method for removing organic pollutants from contaminated water and soil environments.

Aggregation kinetics of UV-aged soot nanoparticles in wet environments: Effects of irradiation time and background solution chemistry

Soot nanoparticles (SNPs) undergo aging processes in aqueous systems, altering their physicochemical properties and affecting their fate and transport. This study investigated the aging effects via ultraviolet irradiation on aggregation kinetics of SNPs in water. The results showed that, compared to fresh SNPs, those irradiated for 1 day aggregated more easily in NaCl and CaCl₂ solutions, with reduction of critical coagulation concentrations by 72% and 40%, respectively. Similar phenomena were found in additional six electrolyte solutions, and SNPs irradiated for > 3 days had no measurable difference in aggregation rate. The aggregation-enhancement of irradiated SNPs was more prominent at low electrolyte concentrations and pH > 4. However, in the presence of macromolecules, irradiated SNPs could be stabilized against aggregation via steric hindrance with strength of bovine serum albumin > humic acid > alginate > fulvic acid, whereas alginate further destabilized aged SNPs via calcium bridging. The fitted Hamaker constant increased from 7.8 × 10^-20 (fresh) to 1.2 × 10^-19 J (7-day irradiated), suggesting that decarboxylation during irradiation may weaken electrical repulsion and enhance van der Waals attraction, promoting aggregation. These results demonstrated the vital role of UV-induced aging in fate and transport of SNPs in wet environments.

Photogeneration of Reactive Species from Biochar-Derived Dissolved Black Carbon for the Degradation of Amine and Phenolic Pollutants

Due to agricultural waste combustion and large-scale biochar application, biochar-derived dissolved black carbon (DBC) is largely released into surface waters. The photogeneration of reactive species (RS) from DBC plays an important role in organic pollutant degradation. However, the mechanistic interactions between RS and pollutants are poorly understood. Here, we investigated the formation of DBC triplet states (³DBC*), singlet oxygen (¹O₂), and hydroxyl radical (^•OH) in straw biochar-derived DBC solutions and photodegradation of typical pharmaceuticals and personal care products (PPCPs). Laser flash photolysis and electron spin resonance spectrometry showed that DBC exhibited higher RS quantum yields than some well-studied dissolved organic matter. The RS caused rapid degradation of atenolol, diphenhydramine, and propylparaben, selected as target PPCPs in this study. The ³DBC* contributed primarily to the oxidation of selected PPCPs via one-electron-transfer interaction, with average reaction rate constants of 1.15 × 10⁹, 1.41 × 10⁹, and 0.51 × 10⁹ M^-1 s^-1, respectively. ^•OH also participated in the degradation and accounted for approximately 2.7, 2.5, and 18.0% of the total removal of atenolol, diphenhydramine, and propylparaben, respectively. Moreover, the photodegradation products were identified using high-resolution mass spectrometry, which further confirmed the electron transfer and ^•OH oxidation mechanisms. These findings suggest that DBC from the combustion process of agricultural biomass can efficiently induce the photodegradation of organic pollutants under sunlight in aquatic environments.

Preparation and application of Fe/biochar (Fe-BC) catalysts in wastewater treatment: A review

The removal of organic pollutants from water environments is a challenging problem. Fe-based BC (Fe-BC) composites are promising catalysts for generating reactive oxygen species (ROS) for environmental remediation considering their low costs and excellent physicochemical surface characteristics. The synthesis methods, properties, applications, and the mechanism of Fe-BC for removing pollutants are reviewed. Various methods have been used to prepare Fe-BC composites, and the synthetic methods and conditions used affect the properties of the Fe-BC material, thereby influencing its pollutant removal performance. The mechanisms of pollutant removal by Fe-BC are intricate and include adsorption, degradation and reduction. Fe loading on BC could improve the performance of BC by affecting its surface area, surface functional groups and electron transfer rate. Moreover, research gaps and uncertainties that exist in the use of Fe-BC were identified. Finally, the problems that need to be solved to make Fe-BC suitable for future applications are described.

Bacterial response to soil property changes caused by wood ash from wildfire in forest soils around mining areas: Relevance of bacterial community composition, carbon and nitrogen cycling

The different physical-chemical properties of the black ash (200-500 °C) and white ash (>510 °C) generated by wildfire may result in varied impacts on soil biological and abiotic indicators. Many studies have highlighted the environmental impacts of wood ash application due to its complex mixture of beneficial and detrimental compounds. However, few studies have compared the effect of black ash and white ash on soil, especially for the heavy metal polluted soil. In this study, we used the comparative analysis of parallel microcosm experiments to study the impacts of white ash and black ash on bioavailable heavy metals and metabolic potentials of microbial community. The results indicated that both white ash and black ash increased the concentration of soil bioavailable As and Cr, while the increasing trend of bioavailable As could be limited by Ca in the treatment of white ash. The addition of black ash could enhance the abundance of genes related to the Calvin cycle (CBB). Different kinds of wood ash inputs into soils could cause the differences in the microbial taxa for carbon fixation, as indicated by the dominance of different taxa for carbon fixation in white ash versus black ash treatments. Additionally, both white ash and black ash impaired dissimilatory nitrate reduction to ammonium (DNRA), nitrate assimilation and nitrification, while white ash enhanced denitrification.

Cycling of black carbon and black nitrogen in the hydro-geosphere: Insights on the paradigm, pathway, and processes

The provenance, preponderance, mobilization/export potential, and environmental health effects of charred residues have been reviewed and discussed in the context of decoupling of biogeochemical DOC (and DON) cycling. The present review suggests that high anthropogenic inputs and enrichment of marine sediments by bulk terrigenous DOC (δ¹³C ~ -20‰ to -25‰) lead to high DOC/DON ratios (≥10), which correlate with seasonal hydrology and diagenetic events. The stability of refractory residues like pyrrole for black nitrogen (BN) and aromatic hydrocarbons for (BC) under pedogenic and diagenetic processes needs to be addressed, considering time lags between production and resuspension events. A variation in absolute values of δ¹⁵N (2.0 to 7.0‰) in organically sequestered marine sediments indicates complex sources of various nitrogen-enriched organic carbon (OC) and dynamic erosion processes. These natural events are signified by an OC/DBN ratio of 13.3 ± 3.5, often explained by variations in precursor organic materials. Complex biogeochemical evolution at forest and agricultural ecosystem levels, coupled with anthropogenic influences, renders δ¹⁵N values between -10 and 10‰, which are lower than in marine ecosystems (6-10‰). This article focuses on the interrelationship between DBC and DBN, their global features relative to transport and movement to aquatic bodies, and current methodologies that specifically explore aquatic and terrestrial cycling of DBC/DBN. The review also takes into account critical research gaps and highlights the challenges and opportunities for research on BC and BN dynamics in the environment. The quantitative contribution of BC and BN in the DOC of the hydrosphere and the corresponding pathway of DBC may be studied further to have more insight into the distribution of dissolved matter in the global ocean system.

Photochemical reactivity of nitrogen-doped biochars under simulated sunlight irradiation: Generation of singlet oxygen

This study explored the photochemical activity of nitrogen-doped biochars (NCMs) by investigating their role in the degradation of sulfamethazine under simulated sunlight irradiation. NCMs with different doping amounts were prepared from corn straw and urea. Results showed that nitrogen doping can notably enhance the photodegradation of SMT rather than raw char. NCMs are of photochemical activity under visible light, which was confirmed by monochromatic light experiments. Quenching experiments, ESR, pH effect, and the influence of O₂ were carried out to explore the involved oxidation mechanism in this system. Results showed that ¹O₂ was the main reactive oxygen species. ¹O₂ was produced from O₂ by both energy transfer and electron transfer. DFT calculations showed that pyridinic N doping can decrease the energy of intersystem crossing and thus benefit the generation of ¹O₂ by triplet-triplet energy transfer. Results underscore the explicit importance of nitrogen element in photochemical reactivity of chars under simulated light irradiation even when the nitrogen content is low. It is a meaningful reminder for us to pay more attention to the assessment of the fate and transport of contaminants in the soil where it is rich in NCMs as well as the potential use of NCMs for pollutants remediation, since visible light is very abundant near the earth's surface.

Photochemical Transformation and Catalytic Activity of Dissolved Black Nitrogen Released from Environmental Black Carbon

Biomass combustion results in the formation and wide distribution of black carbon (BC) in soils, wherein the dissolved fractions are among the most active components. Although the presence of dissolved black nitrogen (DBN) in BC has been identified, its environmental behavior and implication are not understood. This study investigated the photochemical transformation and catalytic activity of DBN under simulated solar irradiation. DBN is more easily transformed than dissolved BC due to its photoactive heteroaromatic N structure, and the half-life of DBN produced at 500 °C (8.6 h) is two times shorter than that of the dissolved BC counterpart (23 h). Meanwhile, solar irradiation is favorable for the homoaggregation of DBN. During irradiation, DBN generates not only reactive oxygen species (e.g., ¹O₂, O₂^-, and ^•OH) but also reactive nitrogen species (mainly ^•ON), which account for its higher photocatalytic degradation of bisphenol A than dissolved BC. These findings shed new light on the impact of heteroatoms on the phototransformation and activity of BC as well as cycling of N in terrestrial systems.

Insight into chain scission and release profiles from photodegradation of polycarbonate microplastics

Bisphenol A polycarbonate (BPA-PC) is a kind of widely used engineering plastics. However, excessive usage causes the production of plastic wastes, following property changes of polymers and high risks of released chemicals during outdoor weathering. In this study, we systematically investigated the photoaging behavior of PC microplastics (MPs) in aquatic environment and evaluated the potential risk of released intermediates. Light irradiation along with mechanical abrasion facilitated the fragmentation of PC MPs and stimulated photooxidative modification during 640 h of ultraviolet (UV) exposure. Continuous degradation of the polymer was accompanied with dramatic decline of molecular weight. Also, BPA was released from irradiated PC MPs with a trend of an initial rapid increase followed by a decrease versus the irradiation time, and the maximum concentration of dropped BPA was detected up to 652.80 ± 72.89 μg/g (43.39% and 56.61% respectively in particles and leachates). However, the releasing amount of BPA in the leachate merely occupied 2.7% of the total organic carbon (TOC) leached out, suggesting that a great number of unknown organic products were produced other than BPA. Liquid chromatography-time-of-flight-mass spectrometry (LC-TOF-MS) analysis showed that these organic compounds forming MPs-derived dissolved organic matter (MPs DOM) were partly composed of 4,4'-dihydroxybenzophenone (DHB), p-hydroxybenzoic acid (p-HBA) and methyparaben (MeP), which would also contribute to the estrogenic activity. The degradation pathway of PC MPs was elaborated with the photolysis process of PC dimer and BPA, and the remarkable photoaging of PC MPs was mainly dominated by the generated reactive oxygen species (ROS). The findings of this study indicated that understanding the photoaging process of PC MPs was vital to evaluate their integral cumulative estrogenic activity in aquatic environment, and further highlighted the notable possible risks of plastic leachates to exposed biota.

Development of a VUV-UVC/peroxymonosulfate, continuous-flow Advanced Oxidation Process for surface water disinfection and Natural Organic Matter elimination: Application and mechanistic aspects

Surface waters are often charged with high amounts of natural organic matter (NOM), organic contaminants and pathogens. In this work, a Vacuum UV/PMS process (VUV-UVC/PMS) was employed for treating river water, assessing the simultaneous NOM mineralization and bacterial disinfection. The VUV-UVC process (without PMS) decreased TOC concentration from 3.83 to 0.15 mg/L within 20 min, achieving complete disinfection. Adding 5 mg/L PMS increased the rate of TOC removal by 80%; complete removal of TOC was achieved in 15 min and disinfection was attained twice as fast. The mechanism of NOM mineralization was scrutinized; aeration played a considerable role due to oxygen supply, mixing, and inducing in-situ H₂O₂ production. HO^• and SO₄^•- were the main radical species involved, alongside an important contribution of the matrix; sulfate enhanced TOC removal, due to the formation of additional radicals, underlining its importance. Furthermore, over 99% TOC reduction and complete disinfection was achieved in the VUV-UVC/PMS process operated under continuous-flow mode with a 2-min hydraulic retention time. Finally, the use of Atrazine (ATZ) as a probe compound and a series of scavenging tests led to an integrated proposal for the mineralization of NOM. Accordingly, the VUV-UVC/PMS process is evaluated as an efficient and promising technology for surface water treatment.

Photochemistry of biochar during ageing process: Reactive oxygen species generation and benzoic acid degradation

In this study, the photogeneration of OH and ¹O₂ and the degradation mechanism of organic pollutants in biochar suspension under the simulated solar light irradiations were investigated. Biochar derived from rice husk with 550 °C of charring temperature (R550) was selected to degrade benzoic acid. It was found that 10 g/L of R550 could degrade 78.7% of benzoic acid within 360 min at pH 3, and the degradation efficiency was promoted to 95.2% as ultraviolet (UV) presented. By checking the production of p-hydroxybenzoic acid, UV accelerated the production of OH, which was confirmed by the enhanced degradation efficiency of 59.2% caused by the evaluated OH as UV appeared. The furfuryl alcohol loss in the R550 suspension under light irradiations testified to the production of ¹O₂, which contributed to 9.3% of benzoic acid degradation. Oxidization treatment using gradient concentrations of H₂O₂ was employed to enhance the ageing process of biochar. As the ageing processed, the biochar possessed a declined performance towards OH production from O₂ activation and the radical degradation of organic pollutants. As a contrast, the evaluated content of ¹O₂ and enhanced non-radical degradation of organic pollutants was reached as UV presented. The further study indicated that phenolic hydroxyl groups on biochar facilitated the production of OH via the electron transfer, and quinone like structures (C=O) on biochar boosted the generation of ¹O₂ via the energy transfer. Moreover, upon eliminating the BA degradation, persistent free radicals were formed on biochar, which was enhanced owing to the presence of UV.

Visible-LED-light-driven photocatalytic degradation of ofloxacin and ciprofloxacin by magnetic biochar modified flower-like Bi2WO6: The synergistic effects, mechanism insights and degradation pathways

Bi₂WO₆ possesses good stability but poor photocatalytic activity under visible light. Herein, the coupling of Bi₂WO₆, Fe₃O₄ and biochar (Bi₂WO₆/Fe₃O₄/BC) was investigated to enhance the photocatalytic performance of Bi₂WO₆ through facile hydrothermal method, which almost completely degraded ofloxacin (OFL) and ciprofloxacin (CIP) within 30 min under energy-saving visible LED irradiation. The superior photocatalytic activity of Bi₂WO₆/Fe₃O₄/BC was ascribed to the stronger visible light adsorption capacity and the lower recombination of electron-hole pairs. O₂^- played a major role during the photocatalytic reaction. The characterization results suggested that the introduction of biochar avoided the agglomeration of Bi₂WO₆ microspheres and Fe₃O₄ nanoparticles, at the same time, the biochar participated in OFL and CIP photodegradation by consuming different oxygen-containing functional groups. In order to further evaluate the application potential of Bi₂WO₆/Fe₃O₄/BC, the effects of environment factors and the application in different actual water were carefully investigated. Various transformation products and the possible degradation pathways of OFL and CIP were analyzed based on high resolution mass spectrometry (HRMS) results, moreover, the toxicity evaluation results of Escherichia coli indicated these intermediates products were less toxic compared OFL and CIP. Overall, Bi₂WO₆/Fe₃O₄/BC can provide a potential way for the application of photocatalytic technology in ambient wastewater purification.

Application of biochars in the remediation of chromium contamination: Fabrication, mechanisms, and interfering species

Chromium (Cr) is one of the most toxic pollutants that has accumulated in terrestrial and aqueous systems, posing serious risks towards living beings on a worldwide scale. The immobilization, removal, and detoxification of active Cr from natural environment can be accomplished using multiple advanced materials. Biochar, a carbonaceous pyrolytic product made from biomass waste, is considered as a promising material for the elimination of Cr contamination. The preparation and properties of biochar as well as its remediation process for Cr ions have been well investigated. However, the distinct correlation of the manufacturing, characteristics, and mechanisms involved in the remediation of Cr contamination by various designed biochars is not summarized. Herein, this review provides information about the production, modification, and characteristics of biochars along with their corresponding effects on Cr stabilization. Biochar could be modified via physical, hybrid, chemical, and biological methods. The remediating mechanisms of Cr contamination using biochars involve adsorption, reduction, electron shuttle, and photocatalysis. Moreover, the coexisting ions and organic pollutants change the pattern of the remediating process of biochar in actual Cr contaminated water and soil. Finally, the present limitations and future perspectives are proposed.

Singlet Oxygen Quantum Yields in Environmental Waters

Singlet oxygen (¹O₂) is a reactive oxygen species produced in sunlit waters via energy transfer from the triplet states of natural sensitizers. There has been an increasing interest in measuring apparent ¹O₂ quantum yields (Φ_Δ) of aquatic and atmospheric organic matter samples, driven in part by the fact that this parameter can be used for environmental fate modeling of organic contaminants and to advance our understanding of dissolved organic matter photophysics. However, the lack of reproducibility across research groups and publications remains a challenge that significantly limits the usability of literature data. In the first part of this review, we critically evaluate the experimental techniques that have been used to determine Φ_Δ values of natural organic matter, we identify and quantify sources of errors that potentially explain the large variability in the literature, and we provide general experimental recommendations for future studies. In the second part, we provide a qualitative overview of known Φ_Δ trends as a function of organic matter type, isolation and extraction procedures, bulk water chemistry parameters, molecular and spectroscopic organic matter features, chemical treatments, wavelength, season, and location. This review is supplemented with a comprehensive database of Φ_Δ values of environmental samples.

Urban Ground-Level O3 Trends: Lessons from Portuguese Cities, 2010–2018

Big datasets of air-quality pollutants and weather data allow us to review trends of NO2, NO, O3, and global radiation (GR), for Lisbon, Porto and Coimbra, with regard to the historical period of 2010–2018. GR is expected to have a considerable impact on photochemical reactions of the O3 formation mechanism. We aim to characterize daily, monthly, and yearly trends. We explore Weekday (WD) versus weekend (WE), and seasonality of O3 and NO2. We are interested to know these pollutant peak concentration variations over the years and investigate if parallels can be drawn between urban mobility indicators and these pollutants. For this purpose, economic data, European emission standards, and car stock data (fuel, age, and number of vehicles) are cross-analyzed. How are they correlated? Has it impacted NO2 and O3 variations? How do different air-quality monitoring stations (AQMS), traffic and non-traffic, compare? How is Lisbon NOx-O3 correlated? What are its implications for future scenarios? Results show that urban mobility trends and economic events are correlated with NO2 and O3 variability. Weekend effect has a partial relationship with urban mobility trends and economy as it is relatively well correlated for Lisbon but not for Porto and Coimbra. Nonetheless, weekend effect for the period of 2010–2018 is overall trending upwards for all cities. In Lisbon and Coimbra, O3 concentrations also trend upwards during the same 2010–2018 period but for Porto they do not. Regardless, for the period of 2015–2018, after the economic recession, the upwards trends of both weekend effect and overall O3 concentrations are clear for all AQMS. For AQMS peak values comparison, Lisbon traffic AQMS registered an annual averaged 8-hour daily max O3 concentration of 34.4 ppb while Lisbon non-traffic AQMS presented 39.1 ppb. Altogether, annual 8-hour daily maximum values for 2010–2018 traffic AQMS in Lisbon show an inverse relationship with fuel sales, and have concentrations fluctuating between 28–35 ppb, which is slightly higher than the 2001–2010 historical European range of 27–31 ppb. Lastly, for the 8 years data in Lisbon, it has been shown that a negative NOx-O3 correlation exists, and the study location might be VOC–sensitive. This means that as NOx concentrations decrease, O3 concentrations become exponentially higher. Further research into VOCs with better data availability is required to make more concise claims. Regardless, it can be inferred that in a future scenario where mitigation continues to escalate, through O3 emission standards and an aggressive shift of car stock to electric vehicles, achieving unprecedented rises in O3 concentrations could be observed.

Elevated Temperatures Decrease the Photodegradation Rate of Pyrethroid Insecticides on Spinach Leaves: Implications for the Effect of Climate Warming

Climate warming is seldom considered in the transformation of pesticides on a plant leaf. This study investigated the effects of photodegradation temperature and spinach growth temperature from 15 to 21 °C on the photodegradation of bifenthrin, cypermethrin, fenvalerate, and deltamethrin on spinach leaves under xenon lamp irradiation in climate incubators. The photodegradation temperature had minor effects on pyrethroid photodegradation. Interestingly, the photodegradation rates decreased with increasing spinach growth temperature. For example, the photodegradation rate constant of bifenthrin on a spinach cultivated at 15 °C (3.73 (±0.59, 95% confidence level) × 10^-2 h^-1) was 1.9 times higher than that at 21 °C (1.96 (±0.17) × 10^-2 h^-1). Hydroxyl radicals (·OH) played a dominant role in the photodegradation. We speculate that ·OH originated from the degradation of hydroperoxide that was formed by oxidation of phenolic CH═CH, aliphatic CH₃ and aromatic C-O-C, and subsequent hydrogen abstraction. The contents of these functional groups decreased with increasing growth temperature, which resulted in lower photodegradation rates at higher growth temperatures. A possible photodegradation pathway including ester bond cleavage, decyanation, and phenyl group removal was proposed. This work provides new insight into the effects of climate warming on the generation of reactive oxygen species and the transformation of pesticides on a plant leaf.

Formation and transformation of manganese(III) intermediates in the photochemical generation of manganese(IV) oxide minerals

As important natural oxidants and adsorbents, manganese (Mn) oxide minerals affect the speciation, bioavailability and fate of pollutants and nutrient elements. It was found that birnessite-type Mn(IV) oxide minerals can be formed in the presence of NO₃^- and solar irradiation. However, the photochemical formation and transformation processes from Mn²⁺ to Mn(IV) oxide minerals remain unclear. In this work, the Mn(IV) oxide minerals were confirmed to be photochemically formed mainly due to the disproportionation of Mn(III) intermediates generated from the oxidation of Mn²⁺ in the presence of NO₃^- under UV light irradiation. The oxidation rate of Mn²⁺ to Mn(IV) oxide minerals decreased with increasing initial Mn²⁺ concentration due to the lower disproportionation rate. The increase in NO₃^- concentration, pH and temperature promoted Mn²⁺ photochemical oxidation. The photochemical formation rate of Mn(IV) oxide minerals increased with increasing ligand concentrations at low ligand concentrations. Ligands affected the formation of Mn(IV) oxide minerals by promoting the formation and reducing the reactivity of Mn(III) intermediates. Overall, this work reveals the important role of Mn(III) intermediates in the formation of natural Mn oxide minerals.

Photo aging and fragmentation of polypropylene food packaging materials in artificial seawater

Plastic litters in marine environment usually contain varied types and contents of additives that can significantly affect the photochemical aging and fragmentation process of microplastics (MPs). This study investigated the photo aging process of two common polypropylene (PP) food packaging materials (i.e., meal box and tea cup) in artificial seawater within 12 d of ultraviolet (UV) irradiation. Results revealed that the aging of both plastic materials were critically inhibited compared with pure PP, indicating that PP food packaging materials in natural seawater may share longer aging time than pure ones. GC-MS analysis revealed that antioxidant Irgafos 168 (tris (2,4-di-tert-butylphenyl) phosphite) was the dominant additive in these plastic materials. Photo reaction between Irgafos 168 and hydroperoxide species on the surface of MPs to prevent the formation of hydroxyl radical was the possible mechanism for the inhibiting effects. After antioxidant was exhausted, its photo degradation products could become the dominant contributor to influence the aging process of MPs. This is the first work exploring the role of antioxidant on the aging process of PP MPs in simulated ocean environment. The findings could be of great help for unraveling the effect of antioxidants on the aging-related environmental risk of hydrocarbon plastics in ocean environment.

Sulfide-induced reduction of nitrobenzene mediated by different size fractions of rice straw-derived black carbon: A key role played by reactive polysulfide species

Here we investigated the mediation efficiency of different size fractions of rice straw-derived black carbon (BC) using sulfide-induced nitrobenzene reduction as a model system. The bulk BC was divided into three size fractions: dissolved BC (size <0.45 μm), colloidal BC (0.45 μm < size < 1 μm), and particulate BC (size > 1 μm). With the presence of BC fractions (250 mg/L) nitrobenzene reduction by Na₂S was significantly facilitated, wherein the mediation efficiency was positively correlated with the BC fraction's oxygen group content in an order of particulate BC < colloidal BC ≪ dissolved BC. Consistently, the oxidation treatment of particulate BC with O₃ or HNO₃ improved the mediation efficiency, whereas the reduction treatment with NaBH₄ reduced the mediation efficiency. The supernatant collected with dialysis or filtration of suspension of BC materials pre-reacted with Na₂S could effectively reduce nitrobenzene, suggesting that reactive reducing sulfur species were produced in aqueous solutions by reacting sulfide only with BC materials. This was evidenced by the fact that polysulfides and polysulfide radicals were both detected in the supernatant. As demonstrated by electron paramagnetic resonance analysis, the quinone moieties at the surface of BC materials accepted electrons from sulfide and turned into semiquinone free radicals, consequently leading to formation of reactive reducing sulfur species and thus enhanced nitrobenzene reduction. The strong mediation efficiency on redox reactions observed for colloidal BC and dissolved BC combined with their significant mobility in subsurface environments indicate that these carbonaceous materials may play an important role in the fate process of organic contaminants as both carriers and catalysts. CAPSULE: The surface quinone moieties of BC induce the formation of reactive reducing sulfur species by acting as one-electron acceptors and facilitate nitrobenzene reduction by sulfide.

Production, properties, and catalytic applications of sludge derived biochar for environmental remediation

Environment-friendly and cost-effective disposal and reutilization of sludge wastes are essential in wastewater treatment processes (WWTPs). Converting activated sludge into biochar via thermochemical treatment is a promising technology for waste management in WWTPs. This review summarizes the compositions of sludge, the dewatering methods, and the thermochemical methods whichinfluence the structures, chemistry, and catalytic performances of the derived biochar. Moreover, the physiochemical characteristics and chemical stability of sludge biochar are discussed. Catalytic applications of biochar are highlighted, including the reaction mechanisms and feasibility for catalytic removal of organic contaminants. High-temperature carbonized sludge biochar exhibits excellent performance for persulfate activation in advanced oxidation processes due to the graphitic carbon structure, newly-created active sites, and fine-tuned metal species. Therefore, the sludge biochar can be produced via cost-effective and eco-friendly approaches to immobilize harmful components from sludge and remediate organic pollution in wastewater, offering a sustainable route toward sludge reutilization into value-added products for water purification.

Biochar Aging: Mechanisms, Physicochemical Changes, Assessment, And Implications for Field Applications

Biochar has triggered a black gold rush in environmental studies as a carbon-rich material with well-developed porous structure and tunable functionality. While much attention has been placed on its apparent ability to store carbon in the ground, immobilize soil pollutants, and improve soil fertility, its temporally evolving in situ performance in these roles must not be overlooked. After field application, various environmental factors, such as temperature variations, precipitation events and microbial activities, can lead to its fragmentation, dissolution, and oxidation, thus causing drastic changes to the physicochemical properties. Direct monitoring of biochar-amended soils can provide good evidence of its temporal evolution, but this requires long-term field trials. Various artificial aging methods, such as chemical oxidation, wet-dry cycling and mineral modification, have therefore been designed to mimic natural aging mechanisms. Here we evaluate the science of biochar aging, critically summarize aging-induced changes to biochar properties, and offer a state-of-the-art for artificial aging simulation approaches. In addition, the implications of biochar aging are also considered regarding its potential development and deployment as a soil amendment. We suggest that for improved simulation and prediction, artificial aging methods must shift from qualitative to quantitative approaches. Furthermore, artificial preaging may serve to synthesize engineered biochars for green and sustainable environmental applications.

Enhancing peroxymonosulfate activation of Fe-Al layered double hydroxide by dissolved organic matter: Performance and mechanism

In this study, peroxymonosulfate (PMS) activation of FeAl layered double hydroxide (FeAl-LDH) was enhanced by compounding dissolved organic matter (DOM). The characterization and catalytic performance of FeAl-LDH and DOM-LDH were investigated. The results revealed that the physicochemical properties of DOM-LDH were superior to FeAl-LDH: (i) The higher proportion of Fe(II) was found in DOM-LDH, mainly existed in the form of trans-coordinated octahedral Fe(II); (ii) DOM-LDH showed a flower-like morphology with larger specific surface area, pore width and pore volume; (iii) More functional groups and surface oxygen vacancies were found in DOM-LDH. Moreover, DOM promoted the process of PMS activation by accelerating Fe(III) reduction with humic acid-like compounds. The results of electron paramagnetic resonance (EPR) and quenching experiments indicated that more reactive oxygen species (ROS) were generated in DOM-LDH/PMS system, •OH was considered as the dominant ROS for Bisphenol A (BPA) degradation. As a result, the degradation efficiency for BPA (20 mg L^-1) in FeAl-LDH/PMS system was increased from 60% to 93% within 60 min after the introduction of DOM. This work is expected to facilitate the design and application of Fe(II)/PMS system for environmental protection.

Application of biochar in advanced oxidation processes: supportive, adsorptive, and catalytic role

The advanced oxidation processes (AOPs), especially sulphate radical (SO₄^•-)-based AOPs (SR-AOPs), have been considered more effective, selective, and prominent technologies for the removal of highly toxic emerging contaminants (ECs) due to wide operational pH range and relatively higher oxidation potential (2.5-3.1 V). Recently, biochar (BC)-based composite materials have been introduced in AOPs due to the dual benefits of adsorption and catalytic degradation, but the scientific review of BC-based catalysts for the generation of reactive oxygen species (ROSs) through radical- and non-radical-oriented routes for EC removal was rarely reported. The chemical treatments, such as acid/base treatment, chemical oxidation, surfactant incorporation, and coating and impregnation of minerals, were applied to make BC suitable as supporting materials (SMs) for the loading of Fenton catalysts to boost up peroxymonosulphate/persulphate/H₂O₂ activation to get ROSs including ^•OH, SO₄^•-, ¹O₂, and O₂^•- for targeted pollutant degradation. In this review, all the possible merits of BC-based catalysts including supportive, adsorptive, and catalytic role are summarised along with the possible route for the development prospects of BC properties. The limitations of SR-AOPs especially on production of non-desired oxyanions, as well as disinfection intermediates and their potential solutions, have been identified. Lastly, the knowledge gap and future-oriented research needs are highlighted.

The synergetic role of rice straw in enhancing the process of Cr(VI) photoreduction by oxalic acid

Based on the goal of green and effective removal of chromium (Cr(VI)) pollution in water and the idea of treating waste with waste, rice straw (RS) was firstly and successfully used in enhancing the photoreduction of highly toxic Cr(VI) to less toxic Cr(III) by oxalic acid (Ox). Batch experiments (the effect of Ox concentration, initial Cr(VI) concentration, RS dosage and coexisting ions) in Ox + RS + UV photoreduction system were designed to investigate the reaction process. Through studying the effect of initial pH in the solution, the change of pH during the photoreduction process and the free radical scavenging test, the Cr(VI) photoreduction mechanism in Ox + RS + UV system was revealed. The role of RS in Ox + RS + UV system was also deduced by the analysis of FT-IR, XRD, Mott-Schottky and the verification test of the role of -OH and SiO₂ on RS. The results showed that RS could significantly synergize Ox to reduce Cr(VI) under UV, 1 mM Cr(VI) in aqueous solution was completely removed in 60 min by Ox + RS + UV system. The Cr(VI) photoreduction mechanism in Ox + RS + UV system consisted of multiple parts: the chemical reduction by Ox(few part), the photoreduction by Ox(some part), and the synergistic photoreduction by RS with Ox(large part). The synergism of RS in Ox + RS + UV system was mainly attributed to its components of SiO₂ and -OH of cellulose.

Effects of aging and weathering on immobilization of trace metals/metalloids in soils amended with biochar

Biochar is an effective amendment for trace metal/metalloid (TMs) immobilization in soils. The capacity of biochar to immobilize TMs in soil can be positively or negatively altered due to the changes in the surface and structural chemistry of biochar after soil application. Biochar surfaces are oxidized in soils and induce structural changes through physical and biochemical weathering processes. These changes in the biochar surface and structural chemistry generally increase its ability to immobilize TMs, although the generation of dissolved black carbon during weathering may increase TM mobility. Moreover, biochar modification can improve its capacity to immobilize TMs in soils. Over the short-term, engineered/modified biochar exhibited increased TM immobilization capacity compared with unmodified biochar. In the long-term, no large distinctions in such capacities were seen between modified and unmodified biochars due to weathering. In addition, artificial weathering at laboratories also revealed increased TM immobilization in soils. Continued collection of mechanistic evidence will help evaluate the effect of natural and artificial weathering, and biochar modification on the long-term TM immobilization capacity of biochar with respect to feedstock and synthesis conditions in contaminated soils.

Degradation of organic pollutants by ferrate/biochar: Enhanced formation of strong intermediate oxidative iron species

Biochar draws increasing attention as soil amendment, carbon sink, slow-release fertilizer, and adsorbent. Herein, it was interesting to find out that among 11 kinds of commercial biochar, 3 of them facilitated ferrate oxidation of sulfamethoxazole (SMX). With the addition of biochar, oxidation rates of 5 kinds of organic pollutants (including antibiotics, pharmaceuticals, and personal care product) increased by 3-14 times, and the total organic carbon (TOC) removal ratio increased by 2.4-8 times. Radical scavenging experiment, electron spin resonance (ESR) analysis, and probe compound (sulfoxide) oxidation experiment showed that no radical but intermediate iron species [Fe(IV) and Fe(V)] participated in the oxidation reactions. Redox-active moieties (phenolic hydroxyl) on biochar interact with ferrate as electron shuttle and enhance the formation of intermediate iron species through electron transfer. The intermediate iron species not only interacted with organic pollutants and accelerated their transformation, but also corrupted (oxidized) the physical structure of biochar and expanded its surface area and pore volume. Increase of surface area and pore volume of the spent biochar in turn resulted in the improved adsorption capacity. In addition to eliminating emerging organic pollutants, ferrate/biochar removed 8.7%-31.6% of TOC in authentic water and decreased the formation potential of 20 kinds of chlorinated disinfection by-products (DBPs) by 9.2%-23.9%.

Dissolved Black Carbon Facilitates Photoreduction of Hg(II) to Hg(0) and Reduces Mercury Uptake by Lettuce (Lactuca sativa L.)

Here, we investigated the photoreduction of Hg(II) (Hg(NO3)2) mediated by dissolved black carbon (DBC, <0.45 μm size fraction) collected from water extracts of biochar derived by pyrolyzing crop residues (rice, soybean, and peanut). Under simulated sunlight conditions, the presence of 5 mg C/L DBC significantly facilitated the production of Hg(0) from Hg(II) (initially at 10 nmol/L) with a reduction ratio of 73 ± 4% in 5.3 h. Inhibition of photolysis-induced reactive oxygen species by a quencher or removal of dissolved oxygen indicated that Hg(II) was mainly reduced by superoxide anion (O2•-). Reduction by electrons transferred from photoexcited DBC components or by organic free radicals produced from photo-Fenton-like reactions was also proposed to play a role. Contrary to dissolved humic substances, the DBC-mediated photoreduction of Hg(II) led to unique positive mass-independent isotopic fractionation (MIF) of Hg(0) (Δ199Hg = 1.8 ± 0.3‰), which was attributed to the dominance of secondary Hg(II) reduction by O2•-. The leachate from soil amended with rice biochar at 1-5% mass ratios exhibited significantly higher photocatalytic efficiency than that from unamended soil (wherein the reduced Hg(0) increased from 27 ± 1 to 63 ± 2% in maximum), and the efficiency positively correlated with the percentage of amended biochar. Under natural illumination conditions, the total mercury and/or methylmercury uptake by roots, shoots, and leaves of lettuce (Lactuca sativa L.) grown in water extracts of rice biochar-amended soil was consistently lower (up to 70 ± 20%) than that without the biochar amendment. The findings highlight that DBC might play an important and previously unrecognized role in the biogeochemical cycle and the environmental impact of mercury.

Photolability of pyrogenic dissolved organic matter from a thermal series of laboratory-prepared chars

While pyrogenic dissolved organic matter (pyDOM) is known to be photolabile, the rates and components of pyDOM that are lost via photochemical degradation, and how these vary with pyrogenic source, are poorly understood. Thus, pyDOM was leached from an oak thermal series and a grass chars (250-650 °C) and photoirradiated in a solar simulator. About 10-20% of oak char leachate organic C was mineralized over five days, with greater proportions lost from leachates of higher temperature parent chars. Ultraviolet and fluorescence spectroscopy suggested that mainly aromatic components (e.g., fulvic-, humic-, aromatic-like) were lost. Quantification of benzenepolycarboxylic acids (BPCAs), molecular markers indicated that 75-94% of condensed aromatic C was lost during the first five days of photoincubation, with preferential loss of larger aromatic clusters. Using a 2-component exponential decay model, this most photolabile fraction was calculated to have experimental half-lives of about 1 day. It represented 16 to 23% of the dissolved C, was primarily condensed aromatics, and was likely lost through primary photoreactions. A non-condensed component was lost at half-lives of about 1-2 d, likely through radical-driven propagation reactions. Using the same model, about 43% of pyrogenic C was predicted to be photomineralized over the course of 1 year. These results highlight the contrasting reactivity of condensed and non-condensed portions of pyDOM, and both should be considered when evaluating the potential of pyDOM to alter aquatic ecology and the environmental mobility of priority pollutants.

Phototransformation of biochar-derived dissolved organic matter and the effects on photodegradation of imidacloprid in aqueous solution under ultraviolet light

Dissolved organic matter (DOM) strongly influences the photodegradation of organic pollutants, varying depending on the structure of DOM. With the wide application of biochar, increasing amounts of DOM is released from biochar to the environment, which has different structural characteristics compared to natural DOM. In this study, DOM was derived from maize straw (MS) and pig manure (PM) and biochars by pyrolyzing MS and PM at 300 °C and 500 °C and the optical characteristics of DOM before and after phototransformation were explored via ultraviolet-visible spectroscopy and excitation-emission matrix fluorescence. Photodegradation of an insecticide, imidacloprid (IMI) in the presence of DOM was examined. The results showed that DOM derived from biochar obtained by pyrolyzing MS and PM mainly contained two identified fluorescent components and high pyrolysis temperature (500 °C) was associated with low molecular weight, small light-screening effects and great aromaticity of the DOM. After exposure to UV light, the aromaticity and molecular weight of the DOM declined due to phototransformation. Significant enhancement was observed in IMI photodegradation in the presence of biochar-derived DOM, and the enhancement was the greatest with DOM derived from pig manure biochar pyrolyzed at 500 °C. In addition to the light shielding effect, the ¹O₂ generated from DOM played an important role in the phototransformation of IMI and DOM. The loss of the nitro group and oxidation at the imidazolidine ring were the main photodegradation pathways for IMI. This study expands our understanding of the fate of biochar-derived DOM and its effects on the fate of coexisting organic pollutants.

Insights on photochemical activities of organic components and minerals in dissolved state biochar in the degradation of atorvastatin in aqueous solution

This study systematically investigated the photocatalytic activity of dissolved state biochar (DSB) with different pyrolysis temperature to the degradation of atorvastatin (ATV), a medicine widely used to combat hyperlipidemia. It was found that the photocatalytic efficiency of DSB increased with the decrease of pyrolysis temperature, that is, DSB300 (DSB with 300 °C of pyrolysis temperature) had the greatest photocatalytic activity in same condition, which was attributed to the dual role of DSB300 as heterogeneous photocatalyst and photosensitizer. The mineral components were responsible for the heterogeneous photocatalytic activity of DSB300. Organic carbon components could synergistically enhance the heterogeneous photocatalytic activity by enhancement of electron-hole separation, and contribute to the formation of singlet oxygen (¹O₂) and triplet-excited state (³DSB*) as well. The identification of intermediate products and X-ray photoelectron spectroscopy (XPS) analysis of irradiated DSB300/ATV revealed that cross-coupling reaction between ATV and DSB existed in the photodegradation process of ATV. The detailed photodegradation pathways of ATV were proposed, which was triggered by oxygen insertion of pyrrole ring and hydroxyl addition. Meanwhile, the modification of DSB300 under irradiation was evidently attenuated with ATV as shown by multiple characterizations, which helped to keep the stability of DSB300 in photochemical reaction process.

Role of coke-bounded environmentally persistent free radicals in phenanthrene degradation by hydrogen peroxide

Emission of polycyclic aromatic hydrocarbons (PAHs) is accompanied with the discharge of carbonaceous particles during the coke production. To degrade the adsorbed PAHs, hydrogen peroxide (H₂O₂) was applied as an oxidising agent, which might be activated by the inherent environmentally persistent free radicals (EPFRs) on coke particles. The transformation of phenanthrene (PHE), selected as model molecule, was achieved in H₂O₂/coke particle system without the addition of additional activating agent. This process consumed the particle-bounded EPFRs, inducing the decreasing of spin density from 1.92 × 10¹⁸ to 4.4 × 10¹⁷ spins g^-1 in 30 min of reaction time. Electron paramagnetic resonance (EPR) technique coupled with spin-trapping agent 5, 5-dimethyl-1-pyrroline-N-oxide (DMPO) was used to probe the potential formation of reactive oxygen species. A higher capture [[Formula: see text]] concentration was observed with larger decreases in EPFRs concentration, indicating that EPFRs were the main contributor to the formation of [Formula: see text]. The obtained results suggested that the activation of H₂O₂ by EPFRs on coke particles resulted in the generation of hydroxyl radical ([Formula: see text]), which then back-reacted with adsorbed PHE. The finding of this study shed light on a new remediation technology for toxic carbonaceous byproducts discharged during the coke production.

Effects of biochar on soil microbial community and functional genes of a landfill cover three years after ecological restoration

Landfills, as the most common approach to disposing of municipal solid waste worldwide, disturb native ecosystems and create a need for ecological restoration. The restoration of landfill cover with biochar has shown immediate potential to improve soil microbial functions within one year. However, such characteristics could change after a longer period of time. Here, soil properties, microbial communities, and microbial functional genes related to nutrient cycling were investigated three years after the biochar amendment of the topsoil of a subtropical landfill cover. The results showed that the levels of soil organic matter, water content, total carbon (C), total nitrogen (N) and total phosphorus (P) of biochar-amended soils were higher than those of control soil. Different soil microbial community structures were observed in the biochar-amended and control soils. Nine phyla, including Proteobacteria and Acidobacteria, but not Actinobacteria or Chloroflexi, were enriched in the biochar-amended soil. Although the impact of biochar on shaping microbial communities increased after a longer period of restoration, no differences were observed in soils that were amended using different biochar:soil ratios. The abundances of functional genes related to C and N cycling decreased, whereas those of genes related to P cycling were higher in soils that received biochar amendment. This finding suggests that compared with the control soil, biochar-amended soils were less active in processes involved in C and N cycling but enhanced in processes related to P cycling. This study can serve as a reference for future ecological restoration of degraded lands using biochar.

Triplet Photochemistry of Dissolved Black Carbon and Its Effects on the Photochemical Formation of Reactive Oxygen Species

Dissolved black carbon (DBC) is an important component of dissolved organic matter pool; however, its photochemical properties are not fully understood. In this study, we determined the excited triplet-state quantum yields of DBC (³DBC*) and ¹O₂ quantum yields (Φ_¹O2) of six diverse DBCs using sorbic alcohol, 2,4,6-trimethylphenol (TMP), and furfuryl alcohol and compared the results with quantum yields of reference natural organic matters (NOMs). The average Φ_¹O2 of six DBCs (4.2 ± 1.5%) was greater than that of terrestrial NOM (2.4 ± 0.3%) and comparable to autochthonous NOM (5.3 ± 0.2%). Using TMP as a probe for oxidizing triplets, DBC presented significantly higher apparent quantum yield coefficients for degrading TMP (f_TMP) than the reference NOM, reflecting that the f_TMP values of low-energy ³DBC* were approximately 12-fold greater than those of low-energy ³NOM*. The differences in the f_TMP and Φ_¹O2 trends among the DBCs indicated that the ³DBC* responsible for these reactions may be from different sources. In addition, DBC was much more effective than NOM, on a carbon-normalized basis, during photodegradation of pharmaceutically active compounds. This result confirms that the presence of DBC can accelerate the photodegradation of contaminants that are susceptible to one-electron oxidation by triplets.