Marine origin collagens and its potential applications

Applications of Biocompatible Scaffold Materials in Stem Cell-Based Cartilage Tissue Engineering

Cartilage, especially articular cartilage, is a unique connective tissue consisting of chondrocytes and cartilage matrix that covers the surface of joints. It plays a critical role in maintaining joint durability and mobility by providing nearly frictionless articulation for mechanical load transmission between joints. Damage to the articular cartilage frequently results from sport-related injuries, systemic diseases, degeneration, trauma, or tumors. Failure to treat impaired cartilage may lead to osteoarthritis, affecting more than 25% of the adult population globally. Articular cartilage has a very low intrinsic self-repair capacity due to the limited proliferative ability of adult chondrocytes, lack of vascularization and innervation, slow matrix turnover, and low supply of progenitor cells. Furthermore, articular chondrocytes are encapsulated in low-nutrient, low-oxygen environment. While cartilage restoration techniques such as osteochondral transplantation, autologous chondrocyte implantation (ACI), and microfracture have been used to repair certain cartilage defects, the clinical outcomes are often mixed and undesirable. Cartilage tissue engineering (CTE) may hold promise to facilitate cartilage repair. Ideally, the prerequisites for successful CTE should include the use of effective chondrogenic factors, an ample supply of chondrogenic progenitors, and the employment of cell-friendly, biocompatible scaffold materials. Significant progress has been made on the above three fronts in past decade, which has been further facilitated by the advent of 3D bio-printing. In this review, we briefly discuss potential sources of chondrogenic progenitors. We then primarily focus on currently available chondrocyte-friendly scaffold materials, along with 3D bioprinting techniques, for their potential roles in effective CTE. It is hoped that this review will serve as a primer to bring cartilage biologists, synthetic chemists, biomechanical engineers, and 3D-bioprinting technologists together to expedite CTE process for eventual clinical applications.

Collagen from Marine Sources and Skin Wound Healing in Animal Experimental Studies: a Systematic Review

Collagen (Col) from marine organisms has been emerging as an important alternative for commercial Col and it has been considered highly attractive by the industry. Despite the positive effects of Col from marine origin, there is still limited understanding of the effects of this natural biomaterial in the process of wound healing in animal studies. In this context, the purpose of this study was to perform a systematic review of the literature to examine the effects of Col from different marine species in the process of skin tissue healing using experimental models of skin wound. The search was carried out according to the orientations of Preferred Reporting Items for Systematic Reviews and Meta-Analysis (PRISMA), and the descriptors of the Medical Subject Headings (MeSH) were defined: "marine collagen," "spongin," "spongin," "skin," and "wound." A total of 42 articles were retrieved from the databases PubMed and Scopus. After the eligibility analyses, this review covers the different marine sources of Col reported in 10 different papers from the beginning of 2011 through the middle of 2019. The results were based mainly on histological analysis and it demonstrated that Col-based treatment resulted in a higher deposition of granulation tissue, stimulation of re-epitalization and neoangiogenesis and increased amount of Col of the wound, culminating in a more mature morphological aspect. In conclusion, this review demonstrates that marine Col from different species presented positive effects on the process of wound skin healing in experimental models used, demonstrating the huge potential of this biomaterial for tissue engineering proposals.

Novel Marine Organism-Derived Extracellular Vesicles for Control of Anti-Inflammation

BACKGROUND

Extracellular vesicles (EVs) exhibit potential as functional biomolecules for tissue regeneration and immunomodulation as they play important roles in the physiological communication between cells. EV internal cargo contains miRNAs, proteins, lipids, and so on. Osteoarthritis (OA) is a common joint disease causing disability owing to impaired joint function and pain. EVs originating from animal cells and tissue matrices are also being considered for OA, in addition to research involving non-steroidal therapeutic agents. However, there are no studies on EVs from marine organisms. Hence, we focused on sea cucumber-derived EVs and conducted experiments to set up an extraction protocol and to demonstrate their efficacy to modulate the inflammatory environment.

METHODS

Sea cucumber extracellular matrices (SECMs) were prepared by a decellularization process. Lyophilized SECMs were treated with collagenase and filtered to isolate sea cucumber extracellular vesicles (SEVs). After isolation, we conducted physical characterization and cell activation studies including cytotoxicity, proliferation, and anti-inflammation effect assays.

RESULTS

The physical characterization results showed circular SEVs in the size range of 66-480 nm. These SEVs contained large amounts of protein cargo, infiltrated the synoviocyte membrane without damage, and had a suppressive effect on inflammatory cytokines.

CONCLUSION

This study established an extraction process for EVs from sea cucumber and reported the anti-inflammatory ability of SEVs. Isolated SEVs can be further utilized for tissue regeneration studies and can be compared to various marine or animal-derived EVs.

Light Cross-Linkable Marine Collagen for Coaxial Printing of a 3D Model of Neuromuscular Junction Formation

Collagen is a major component of the extracellular matrix (ECM) that modulates cell adhesion, growth, and migration, and has been utilised in tissue engineering applications. However, the common terrestrial sources of collagen carry the risk of zoonotic disease transmission and there are religious barriers to the use of bovine and porcine products in many cultures. Marine based collagens offer an attractive alternative and have so far been under-utilized for use as biomaterials for tissue engineering. Marine collagen can be extracted from fish waste products, therefore industry by-products offer an economical and environmentally sustainable source of collagen. In a handful of studies, marine collagen has successfully been methacrylated to form collagen methacrylate (ColMA). Our work included the extraction, characterization and methacrylation of Red Snapper collagen, optimisation of conditions for neural cell seeding and encapsulation using the unmodified collagen, thermally cross-linked, and the methacrylated collagen with UV-induced cross-linking. Finally, the 3D co-axial printing of neural and skeletal muscle cell cultures as a model for neuromuscular junction (NMJ) formation was investigated. Overall, the results of this study show great potential for a novel NMJ in vitro 3D bioprinted model that, with further development, could provide a low-cost, customizable, scalable and quick-to-print platform for drug screening and to study neuromuscular junction physiology and pathogenesis.

Collagen membranes for skin wound repair: A systematic review

Membranes or skin dressing are common treatments for skin wound injuries, collagen being one the most effective materials for their manufacturing. Many different sources of collagen with diverse methods of extraction and processing have been used, with evidence of positive effects on the stimulation of skin wound healing. In spite of these factors, there is still limited understanding of the interaction between collagen membranes and biological tissues, especially due to the series of different types of collagen origin. In this context, this study aimed to conduct a systematic review of the available literature examining the effect of various collagen membranes for accelerating skin wound healing in experimental animal models and clinical trials. The present review was performed from March to May of 2020 searching in two databases (PubMed and Scopus). The following Medical Subject Headings (MeSH) descriptors were used: "collagen", "dressing", "membranes", "skin" and "wound". After the eligibility assessment, 16 studies were included and analyzed. The studies demonstrated that collagen was obtained predominantly from bovine and porcine sources, by acetic acid and/or enzyme dissolution. Additionally, most of the studies demonstrated that the membranes were processed mainly by freeze-drying or lyophilization methods. All the in vivo and clinical trial studies evidenced positive outcomes in the wound healing process, thus confirming that collagen membranes are one of the most efficient treatment for skin wounds, highlighting the enormous potential of this biomaterial to be used for skin tissue engineering purposes.

Fundamentals and Current Strategies for Peripheral Nerve Repair and Regeneration

A body of evidence indicates that peripheral nerves have an extraordinary yet limited capacity to regenerate after an injury. Peripheral nerve injuries have confounded professionals in this field, from neuroscientists to neurologists, plastic surgeons, and the scientific community. Despite all the efforts, full functional recovery is still seldom. The inadequate results attained with the "gold standard" autograft procedure still encourage a dynamic and energetic research around the world for establishing good performing tissue-engineered alternative grafts. Resourcing to nerve guidance conduits, a variety of methods have been experimentally used to bridge peripheral nerve gaps of limited size, up to 30-40 mm in length, in humans. Herein, we aim to summarize the fundamentals related to peripheral nerve anatomy and overview the challenges and scientific evidences related to peripheral nerve injury and repair mechanisms. The most relevant reports dealing with the use of both synthetic and natural-based biomaterials used in tissue engineering strategies when treatment of nerve injuries is envisioned are also discussed in depth, along with the state-of-the-art approaches in this field.

Extraction and Characterization of Collagen from Elasmobranch Byproducts for Potential Biomaterial Use

With the worldwide increase of fisheries, fish wastes have had a similar increase, alternatively they can be seen as a source of novel substances for the improvement of society's wellbeing. Elasmobranchs are a subclass fished in high amounts, with some species being mainly bycatch. They possess an endoskeleton composed mainly by cartilage, from which chondroitin sulfate is currently obtained. Their use as a viable source for extraction of type II collagen has been hypothesized with the envisaging of a biomedical application, namely in biomaterials production. In the present work, raw cartilage from shark (Prionace glauca) and ray (Zeachara chilensis and Bathyraja brachyurops) was obtained from a fish processing company and submitted to acidic and enzymatic extractions, to produce acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC). From all the extractions, P. glauca PSC had the highest yield (3.5%), followed by ray ASC (0.92%), ray PSC (0.50%), and P. glauca ASC (0.15%). All the extracts showed similar properties, with the SDS-PAGE profiles being compatible with the presence of both type I and type II collagens. Moreover, the collagen extracts exhibited the competence to maintain their conformation at human basal temperature, presenting a denaturation temperature higher than 37 °C. Hydrogels were produced using P. glauca PSC combined with shark chondroitin sulfate, with the objective of mimicking the human cartilage extracellular matrix. These hydrogels were cohesive and structurally-stable at 37 °C, with rheological measurements exhibiting a conformation of an elastic solid when submitted to shear strain with a frequency up to 4 Hz. This work revealed a sustainable strategy for the valorization of fisheries' by-products, within the concept of a circular economy, consisting of the use of P. glauca, Z. chilensis, and B. brachyurops cartilage for the extraction of collagen, which would be further employed in the development of hydrogels as a proof of concept of its biotechnological potential, ultimately envisaging its use in marine biomaterials to regenerate damaged cartilaginous tissues.

Progress in Modern Marine Biomaterials Research

The growing demand for new, sophisticated, multifunctional materials has brought natural structural composites into focus, since they underwent a substantial optimization during long evolutionary selection pressure and adaptation processes. Marine biological materials are the most important sources of both inspiration for biomimetics and of raw materials for practical applications in technology and biomedicine. The use of marine natural products as multifunctional biomaterials is currently undergoing a renaissance in the modern materials science. The diversity of marine biomaterials, their forms and fields of application are highlighted in this review. We will discuss the challenges, solutions, and future directions of modern marine biomaterialogy using a thorough analysis of scientific sources over the past ten years.

COLLAGEN: STRUCTURE, METABOLISM, PRODUCTION AND INDUSTRIAL APPLICATION

This review presents the current scientific literature data about structure, properties, and functions of collagen, which is known as one of the most abundant human and animal proteins. The building of collagen molecule from the primary structure to submolecular formations, the main stages of its synthesis and biodegradation are briefly described. The information about collagen diversity, its features and metabolic ways in various tissues, including skin, tendons, bones, etc. is presented. The problems of pathologies caused by collagen synthesis and breakdown disorders as well as age-related changes in collagen properties and their causes are discussed. A comparative analysis of the advantages and disadvantages of collagen and its derivatives obtaining from various sources (animals, marine, and recombinant) is given. The most productive methods for collagen extraction from various tissues are shown. The concept of collagen hydrolysis conditions influence on the physicochemical properties and biological activity of the obtained products is described. The applications of collagen and its products in various fields of industrial activity, such as pharmaceutical, cosmetic industry and medicine, are discussed. Further prospective directions of fundamental and applied investigations in this area of research are outlined.

Fish Collagen: Extraction, Characterization, and Applications for Biomaterials Engineering

The utilization of marine-based collagen is growing fast due to its unique properties in comparison with mammalian-based collagen such as no risk of transmitting diseases, a lack of religious constraints, a cost-effective process, low molecular weight, biocompatibility, and its easy absorption by the human body. This article presents an overview of the recent studies from 2014 to 2020 conducted on collagen extraction from marine-based materials, in particular fish by-products. The fish collagen structure, extraction methods, characterization, and biomedical applications are presented. More specifically, acetic acid and deep eutectic solvent (DES) extraction methods for marine collagen isolation are described and compared. In addition, the effect of the extraction parameters (temperature, acid concentration, extraction time, solid-to-liquid ratio) on the yield of collagen is investigated. Moreover, biomaterials engineering and therapeutic applications of marine collagen have been summarized.

Collagen Based Materials in Cosmetic Applications: A Review

This review provides a report on properties and recent advances in the application of collagen in cosmetics. Collagen is a structural protein found in animal organisms where it provides for the fundamental structural support. Most commonly it is extracted from mammalian and fish skin. Collagen has attracted significant academic interest as well as the attention of the cosmetic industry due to its interesting properties that include being a natural humectant and moisturizer for the skin. This review paper covers the biosynthesis of collagen, the sources of collagen used in the cosmetic industry, and the role played by this protein in cosmetics. Future aspects regarding applications of collagen-based materials in cosmetics have also been mentioned.

Sea Cucumber Derived Type I Collagen: A Comprehensive Review

Collagen is the major fibrillar protein in most living organisms. Among the different types of collagen, type I collagen is the most abundant one in tissues of marine invertebrates. Due to the health-related risk factors and religious constraints, use of mammalian derived collagen has been limited. This triggers the search for alternative sources of collagen for both food and non-food applications. In this regard, numerous studies have been conducted on maximizing the utilization of seafood processing by-products and address the need for collagen. However, less attention has been given to marine invertebrates and their by-products. The present review has focused on identifying sea cucumber as a potential source of collagen and discusses the general scope of collagen extraction, isolation, characterization, and physicochemical properties along with opportunities and challenges for utilizing marine-derived collagen.

Marine collagen-chitosan-fucoidan cryogels as cell-laden biocomposites envisaging tissue engineering

The combination of marine origin biopolymers for tissue engineering (TE) applications is of high interest, due to their similarities with the proteins and polysaccharides present in the extracellular matrix of different human tissues. This manuscript reports on innovative collagen-chitosan-fucoidan cryogels formed by the simultaneous blending of these three marine polymers in a chemical-free crosslinking approach. The physicochemical characterization of marine biopolymers comprised FTIR, amino acid analysis, circular dichroism and SDS-PAGE, and suggested that the jellyfish collagen used in the cryogels was not denatured (preserved the triple helical structure) and had similarities with type II collagen. The chitosan presented a high deacetylation degree (90.1%) that can strongly influence the polymer physicochemical properties and biomaterial formation. By its turn, rheology, and SEM studies confirmed that these novel cryogels present interesting properties for TE purposes, such as effective blending of biopolymers without visible material segregation, mechanical stability (strong viscoelastic character), as well as adequate porosity to support cell proliferation and exchange of nutrients and waste products. Additionally, in vitro cellular assessments of all cryogel formulations revealed a non-cytotoxic behavior. The MTS test, live/dead assay and cell morphology assessment (phalloidin DAPI) showed that cryogels can provide a proper microenvironment for cell culturing, supporting cell viability and promoting cell proliferation. Overall, the obtained results suggest that the novel collagen-chitosan-fucoidan cryogels herein presented are promising scaffolds envisaging tissue engineering purposes, as both acellular biomaterials or cell-laden cryogels.

Marine collagen scaffolds and photobiomodulation on bone healing process in a model of calvaria defects

INTRODUCTION

Collagen from marine esponges has been used as a promising material for tissue engineering proposals. Similarly, photobiomodulation (PBM) is able of modulating inflammatory processes after an injury, accelerating soft and hard tissue healing and stimulating neoangiogenesis. However, the effects of the associated treatments on bone tissue healing have not been studied yet. In this context, the present study aimed to evaluate the biological temporal modifications (using two experimental periods) of marine sponge collagen or sponging (SPG) based scaffold and PBM on newly formed bone using a calvaria bone defect model.

MATERIAL AND METHODS

Wistar rats were distributed into two groups: SPG or SPG/PBM and euthanized into two different experimental periods (15 and 45 days post-surgery). A cranial critical bone defect was used to evaluate the effects of the treatments. Histology, histomorfometry and immunohistological analysis were performed.

RESULTS

Histological findings demonstrated that SPG/PBM-treated animals, 45 days post-surgery, demonstrated a higher amount of connective and newly formed bone tissue at the region of the defect compared to CG. Notwithstanding, no difference among groups were observed in the histomorphometry. Interestingly, for both anti-transforming growth factor-beta (TGF-β) and anti-vascular endothelial growth factor (VEGF) immunostaining, higher values for SPG/PBM, at 45 days post-surgery could be observed.

CONCLUSION

It can be concluded that the associated treatment can be considered as a promising therapeutical intervention.

From Food Waste to Innovative Biomaterial: Sea Urchin-Derived Collagen for Applications in Skin Regenerative Medicine

Collagen-based skin-like scaffolds (CBSS) are promising alternatives to skin grafts to repair wounds and injuries. In this work, we propose that the common marine invertebrate sea urchin represents a promising and eco-friendly source of native collagen to develop innovative CBSS for skin injury treatment. Sea urchin food waste after gonad removal was here used to extract fibrillar glycosaminoglycan (GAG)-rich collagen to produce bilayer (2D + 3D) CBSS. Microstructure, mechanical stability, permeability to water and proteins, ability to exclude bacteria and act as scaffolding for fibroblasts were evaluated. Our data show that the thin and dense 2D collagen membrane strongly reduces water evaporation (less than 5% of water passes through the membrane after 7 days) and protein diffusion (less than 2% of BSA passes after 7 days), and acts as a barrier against bacterial infiltration (more than 99% of the different tested bacterial species is retained by the 2D collagen membrane up to 48 h), thus functionally mimicking the epidermal layer. The thick sponge-like 3D collagen scaffold, structurally and functionally resembling the dermal layer, is mechanically stable in wet conditions, biocompatible in vitro (seeded fibroblasts are viable and proliferate), and efficiently acts as a scaffold for fibroblast infiltration. Thus, thanks to their chemical and biological properties, CBSS derived from sea urchins might represent a promising, eco-friendly, and economically sustainable biomaterial for tissue regenerative medicine.

The Effect of Depth on the Morphology, Bacterial Clearance, and Respiration of the Mediterranean Sponge Chondrosia reniformis (Nardo, 1847)

To support the successful application of sponges for water purification and collagen production, we evaluated the effect of depth on sponge morphology, growth, physiology, and functioning. Specimens of Eastern Mediterranean populations of the sponge Chondrosia reniformis (Nardo, 1847) (Demospongiae, Chondrosiida, Chondrosiidae) were reciprocally transplanted between 5 and 20 m depth within the Kaş-Kekova Marine Reserve Area. Control sponges at 5 m had fewer but larger oscula than their conspecifics at 20 m, and a significant inverse relationship between the osculum density and size was found in C. reniformis specimens growing along a natural depth gradient. Sponges transplanted from 20 to 5 m altered their morphology to match the 5 m control sponges, producing fewer but larger oscula, whereas explants transplanted from 5 to 20 m did not show a reciprocal morphological plasticity. Despite the changes in morphology, the clearance, respiration, and growth rates were comparable among all the experimental groups. This indicates that depth-induced morphological changes do not affect the overall performance of the sponges. Hence, the potential for the growth and bioremediation of C. reniformis in mariculture is not likely to change with varying culture depth. The collagen content, however, was higher in shallow water C. reniformis compared to deeper-growing sponges, which requires further study to optimize collagen production.

Beneficial effects of food supplements based on hydrolyzed collagen for skin care (Review)

Ageing is a complex, multi-step process which involves, among others loss of collagen and elastin. Collagen is found in large amounts in the body, especially in the dermis layer. These fibers provide the skin's normal strength, hydration and mechanical properties. Collagen is largely available, as it can be extracted from many animal sources, it can be easily absorbed upon topical administration, hence it is largely used in the cosmetic and pharmaceutical industry for the treatment of premature aging. Bioactive peptides, such as collagen hydrolyzate, are among the most used ingredients for the development of nutraceuticals - food or food ingredients that have defined physiological effects. Numerous studies have demonstrated that peptides resulted from ingestion of hydrolysate collagen and detected in the blood stream have chemotactic properties for skin fibroblasts, helping the skin restoration process. The purpose of this minireview is to present an update on the use of hydrolyzed collagen for skin care.

Marine-Derived Polymers in Ionic Liquids: Architectures Development and Biomedical Applications

Marine resources have considerable potential to develop high-value materials for applications in different fields, namely pharmaceutical, environmental, and biomedical. Despite that, the lack of solubility of marine-derived polymers in water and common organic solvents could restrict their applications. In the last years, ionic liquids (ILs) have emerged as platforms able to overcome those drawbacks, opening many routes to enlarge the use of marine-derived polymers as biomaterials, among other applications. From this perspective, ILs can be used as an efficient extraction media for polysaccharides from marine microalgae and wastes (e.g., crab shells, squid, and skeletons) or as solvents to process them in different shapes, such as films, hydrogels, nano/microparticles, and scaffolds. The resulting architectures can be applied in wound repair, bone regeneration, or gene and drug delivery systems. This review is focused on the recent research on the applications of ILs as processing platforms of biomaterials derived from marine polymers.

Structural feature and self-assembly properties of type II collagens from the cartilages of skate and sturgeon

Acid-soluble collagen (ASC) and pepsin-soluble collagen (PSC) were extracted and purified from the cartilages of skate and sturgeon. Their typical structure and physicochemical properties were evaluated by circular dichroism (CD), X-ray diffraction (XRD), and so on. Results showed that the extracted collagen was likely identified as collagen-II composed of three α-chains (135 kDa), with the typical peptide sequence of Gly-X-Y. It showed the collagen retained the native and intact triple helical structure, and its intensity ratio of the positive and negative absorption peaks (Rpn) was 0.19-0.25. In addition, the extracted collagen exhibited obvious self-assembly behavior with the concentration above 0.3 mg/mL, the adjustment of pH 7.4-7.6 and the NaCl concentration of 120 mmol/L. The critical aggregate mass concentrations of pepsin-soluble collagens from skate and sturgeon were 0.93 and 0.86 g/L, respectively. Therefore, collagens from skate and sturgeon cartilages have potential commercial application.

Evaluation of the In Vivo Biological Effects of Marine Collagen and Hydroxyapatite Composite in a Tibial Bone Defect Model in Rats

One of the most promising strategies to improve the biological performance of bone grafts is the combination of different biomaterials. In this context, the aim of this study was to evaluate the effects of the incorporation of marine spongin (SPG) into Hydroxyapatite (HA) for bone tissue engineering proposals. The hypothesis of the current study is that SPG into HA would improve the biocompatibility of material and would have a positive stimulus into bone formation. Thus, HA and HA/SPG materials were produced and scanning electron microscopy (SEM) analysis was performed to characterize the samples. Also, in order to evaluate the in vivo tissue response, samples were implanted into a tibial bone defect in rats. Histopathological, immunohistochemistry, and biomechanical analyses were performed after 2 and 6 weeks of implantation to investigate the effects of the material on bone repair. The histological analysis demonstrated that composite presented an accelerated material degradation and enhanced newly bone formation. Additionally, histomorphometry analysis showed higher values of %BV/TV and N.Ob/T.Ar for HA/SPG. Runx-2 immunolabeling was higher for the composite group and no difference was found for VEGF. Moreover, the biomechanical analysis demonstrated similar values for all groups. These results indicated the potential of SPG to be used as an additive to HA to improve the biological performance for bone regeneration applications. However, further long-term studies should be carried out to provide additional information regarding the material degradation and bone regeneration.

Cell-Laden Biomimetically Mineralized Shark-Skin-Collagen-Based 3D Printed Hydrogels for the Engineering of Hard Tissues

Mineralization processes based on coprecipitation methods have been applied as a promising alternative to the most commonly used methods of polymer-ceramic combination, direct mixing, and incubation in simulated body fluid (SBF) or modified SBF. In the present study, for the first time, the in situ mineralization (ideally hydroxyapatite formation) of blue shark (Prionace glauca (PG)) collagen to fabricate 3D printable cell-laden hydrogels is proposed. In the first part, several parameters for collagen mineralization were tested until optimization. The hydroxyapatite formation was confirmed by FT-IR, XRD, and TEM techniques. In the second part, stable bioinks combining the biomimetically mineralized collagen with alginate (AG) (1:1, 1:2, 1:3, and AG) solution were used for 3D printing of hydrogels. The addition of Ca²⁺ ions into the system did present a synergistic effect: by one side, the in situ mineralization of the collagen occurred, and at same time, they were also useful to ionically cross-link the blends with alginate, avoiding the addition of any cytotoxic chemical cross-linking agent. Mouse fibroblast cell line survival during and after printing was favored by the presence of PG collagen as exhibited by the biological performance of the hydrogels. Inspired in a concept of marine byproduct valorization, 3D bioprinting of in situ mineralized blue shark collagen is thus proposed as a promising approach, envisioning the engineering of mineralized tissues.

Marine spongin incorporation into Biosilicate® for tissue engineering applications: An in vivo study

Biomaterials and bone grafts, with the ability of stimulating tissue growth and bone consolidation, have been emerging as very promising strategies to treat bone fractures. Despite its well-known positive effects of biosilicate (BS) on osteogenesis, its use as bone grafts in critical situations such as bone defects of high dimensions or in non-consolidated fractures may not be sufficient to stimulate tissue repair. Consequently, several approaches have been explored to improve the bioactivity of BS. A promising strategy to reach this aim is the inclusion of an organic part, such as collagen, in order to mimic bone structure. Thus, the present study investigated the biological effects of marine spongin (SPG)-enriched BS composites on the process of healing, using a critical experimental model of cranial bone defect in rats. Histopathological and immunohistochemistry analyzes were performed after two and six weeks of implantation to investigate the effects of the material on bone repair (supplemental material-graphical abstract). Histological analysis demonstrated that for both BS and BS/SPG, similar findings were observed, with signs of material degradation, the presence of granulation tissue along the defect area and newly formed bone into the area of the defect. Additionally, histomorphometry showed that the control group presented higher values for Ob.S/BS (%) and for N.Ob/T.Ar (mm²) (six weeks post-surgery) compared to BS/SPG and higher values of N.Ob/T.Ar (mm²) compared to BS (two weeks post-surgery). Moreover, BS showed higher values for OV/TV (%) compared to BS/SPG (six weeks post-surgery). Also, VEGF immunohistochemistry was increased for BS (two weeks post-surgery) and for BS/SPG (six weeks) compared to CG. TGFb immunostaining was higher for BS compared to CG. The results of this study demonstrated that the BS and BS/SPG scaffolds were biocompatible and able to support bone formation in a critical bone defect in rats. Moreover, an increased VEGF immunostaining was observed in BS/SPG.

A review on recent advances and applications of fish collagen

During the processing of the fishery resources, the significant portion is either discarded or used to produce low-value fish meal and oil. However, the discarded portion is the rich source of valuable proteins such as collagen, vitamins, minerals, and other bioactive compounds. Collagen is a vital protein in the living body as a component of a fibrous structural protein in the extracellular matrix, connective tissue and building block of bones, tendons, skin, hair, nails, cartilage and joints. In recent years, the use of fish collagen as an increasingly valuable biomaterial has drawn considerable attention from biomedical researchers, owing to its enhanced physicochemical properties, stability and mechanical strength, biocompatibility and biodegradability. This review focuses on summarizing the growing role of fish collagen for biomedical applications. Similarly, the recent advances in various biomedical applications of fish collagen, including wound healing, tissue engineering and regeneration, drug delivery, cell culture and other therapeutic applications, are discussed in detail. These applications signify the commercial importance of fish collagen for the fishing industry, food processors and biomedical sector.

Marine Collagen from Alternative and Sustainable Sources: Extraction, Processing and Applications

Due to its unique properties, collagen is used in the growing fields of pharmaceutical and biomedical devices, as well as in the fields of nutraceuticals, cosmeceuticals, food and beverages. Collagen also represents a valid resource for bioplastics and biomaterials, to be used in the emerging health sectors. Recently, marine organisms have been considered as promising sources of collagen, because they do not harbor transmissible disease. In particular, fish biomass as well as by-catch organisms, such as undersized fish, jellyfish, sharks, starfish, and sponges, possess a very high collagen content. The use of discarded and underused biomass could contribute to the development of a sustainable process for collagen extraction, with a significantly reduced environmental impact. This addresses the European zero-waste strategy, which supports all three generally accepted goals of sustainability: sustainable economic well-being, environmental protection, and social well-being. A zero-waste strategy would use far fewer new raw materials and send no waste materials to landfills. In this review, we present an overview of the studies carried out on collagen obtained from by-catch organisms and fish wastes. Additionally, we discuss novel technologies based on thermoplastic processes that could be applied, likewise, as marine collagen treatment.

3D Chitin Scaffolds of Marine Demosponge Origin for Biomimetic Mollusk Hemolymph-Associated Biomineralization Ex-Vivo

Structure-based tissue engineering requires large-scale 3D cell/tissue manufacture technologies, to produce biologically active scaffolds. Special attention is currently paid to naturally pre-designed scaffolds found in skeletons of marine sponges, which represent a renewable resource of biomaterials. Here, an innovative approach to the production of mineralized scaffolds of natural origin is proposed. For the first time, a method to obtain calcium carbonate deposition ex vivo, using living mollusks hemolymph and a marine-sponge-derived template, is specifically described. For this purpose, the marine sponge Aplysin aarcheri and the terrestrial snail Cornu aspersum were selected as appropriate 3D chitinous scaffold and as hemolymph donor, respectively. The formation of calcium-based phase on the surface of chitinous matrix after its immersion into hemolymph was confirmed by Alizarin Red staining. A direct role of mollusks hemocytes is proposed in the creation of fine-tuned microenvironment necessary for calcification ex vivo. The X-ray diffraction pattern of the sample showed a high CaCO3 amorphous content. Raman spectroscopy evidenced also a crystalline component, with spectra corresponding to biogenic calcite. This study resulted in the development of a new biomimetic product based on ex vivo synthetized ACC and calcite tightly bound to the surface of 3D sponge chitin structure.

Aquaculture and its by-products as a source of nutrients and bioactive compounds

Underutilized marine resources (e.g., algae, fish, and shellfish processing by-products), as sustainable alternatives to livestock protein and interesting sources of bioactive compounds, have attracted the attention of the researchers. Aquatic products processing industries are growing globally and producing huge amounts of by-products that often discarded as waste. However, recent studies pointed out that marine waste contains several valuable components including high-quality proteins, lipids, minerals, vitamins, enzymes, and bioactive compounds that can be used against cancer and some cardiovascular disorders. Besides, previously conducted studies on algae have shown the presence of some unique biologically active compounds and valuable proteins. Hence, this chapter points out recent advances in this area of research and discusses the importance of aquaculture and fish processing by-products as alternative sources of proteins and bioactive compounds.

Marine Collagen Substrates for 2D and 3D Ovarian Cancer Cell Systems

A fundamental structural component of extracellular matrix in all connective and interstitial tissue, collagen is the most abundant protein in the human body. To date, mammalian collagens sources represent the golden standard for multiple biomedical applications, while marine-derived collagens have largely been used in industry (food, pharmaceutical, and cosmetic), with little use in research and clinical applications. Herein we demonstrate the effective use Rhizostoma pulmo jellyfish collagen, a source of biocompatible, sustainable collagen for 2D and 3D cell culture, addressing the global drive for technological developments that result in the replacement of animals and their derived products in research. Jellyfish collagen harbors similar structural features mammalian collagen type I, despite differing slightly in amino acid content. Jellyfish collagen supports ovarian cancer (OvCa) cell line proliferation, cellular morphology and expression of epithelial to mesenchymal transition markers, supporting the use of R. pulmo as a non-mammalian collagen cell culture substrate. Furthermore, R. pulmo collagen is effective in 3D device fabrication such as sponges where it mimics tissue architecture complexity. OvCa cells migrated and differentiated within the R. pulmo collagen 3D scaffolds confirming its suitability for advanced cell culturing applications, providing an excellent alternative to mammalian collagen sources for the culture of human cells.

Innovative Green Technologies of Intensification for Valorization of Seafood and Their by-Products

The activities linked to the fishing sector generate substantial quantities of by-products, which are often discarded or used as low-value ingredients in animal feed. However, these marine by-products are a prominent potential good source of bioactive compounds, with important functional properties that can be isolated or up-concentrated, giving them an added value in higher end markets, as for instance nutraceuticals and cosmetics. This valorization of fish by-products has been boosted by the increasing awareness of consumers regarding the relationship between diet and health, demanding new fish products with enhanced nutritional and functional properties. To obtain fish by-product-derived biocompounds with good, functional and acceptable organoleptic properties, the selection of appropriate extraction methods for each bioactive ingredient is of the outmost importance. In this regard, over the last years, innovative alternative technologies of intensification, such as ultrasound-assisted extraction (UAE) and supercritical fluid extraction (SFE), have become an alternative to the conventional methods in the isolation of valuable compounds from fish and shellfish by-products. Innovative green technologies present great advantages to traditional methods, preserving and even enhancing the quality and the extraction efficiency, as well as minimizing functional properties' losses of the bioactive compounds extracted from marine by-products. Besides their biological activities, bioactive compounds obtained by innovative alternative technologies can enhance several technological properties of food matrices, enabling their use as ingredients in novel foods. This review is focusing on analyzing the principles and the use of UAE and SFE as emerging technologies to valorize seafoods and their by-products.

Fish and fish side streams are valuable sources of high-value components

The current practice of fish processing generates increasing quantities of side streams and waste, such as skin, heads, frames, viscera, and fillet cut offs. These may account for up to 70% of the fish used in industrial processing. Low-value fish catches, and under-utilized fish species comprise another source of side streams. These side streams have been discarded in the environment leading to environmental problems or they have ended up as low commercial value products, such as feed for fur animals and aquaculture. However, several studies have shown that fish side streams contain valuable bioactive ingredients and fractions, such as fish oils, proteins and peptides, collagen, gelatin, enzymes, chitin, and minerals. These compounds and fractions may provide the opportunity to develop novel applications in health promoting foods, special feeds, nutraceuticals, pharmaceuticals, and cosmetic products. Better utilization of side streams and low-value fish would simultaneously improve both the environmental and ecological sustainability of production. This review summarizes the current knowledge on fish and fish side streams as sources of high-value components such as peptides with antimicrobial, antioxidative, antihypertensive, and antihyperglycemic properties, proteins such as fish collagen and gelatin, fish enzymes, fish oils and fatty acids, polysaccharides like glucosaminoglycans, chitin and chitosan, vitamin D, and minerals. Production technologies for recovering the high-value fractions and potential product applications are discussed. Furthermore, safety aspects related to the raw material, technologies, and fractions are considered.

Physicochemical and Biological Properties of Gelatin Extracted from Marine Snail Rapana venosa

In this study, we aimed to obtain gelatin from the marine snail Rapana venosa using acidic and enzymatic extraction methods and to characterize these natural products for cosmetic and pharmaceutical applications. Marine gelatins presented protein values and hydroxyproline content similar to those of commercial mammalian gelatin, but with higher melting temperatures. Their electrophoretic profile and Fourier transform infrared (FTIR) spectra revealed protein and absorption bands situated in the amide region, specific for gelatin molecule. Scanning electron microscopy (SEM) analysis showed significant differences in the structure of the lyophilized samples, depending on the type of gelatin. In vitro studies performed on human keratinocytes showed no cytotoxic effect of acid-extracted gelatin at all tested concentrations and moderate cytotoxicity of enzymatic extracted gelatin at concentrations higher than 0.5 mg/mL. Also, both marine gelatins favored keratinocyte cell adhesion. No irritant potential was recorded as the level of IL-1α and IL-6 proinflammatory cytokines released by HaCaT cells cultivated in the presence of marine gelatins was significantly reduced. Together, these data suggest that marine snails are an alternative source of gelatins with potential use in pharmaceutical and skincare products.

Evaluation of decellularized tilapia skin as a tissue engineering scaffold

Decellularized bovine and porcine tissues have been used as scaffolds to support tissue regeneration but inherit religious restrictions and risks of disease transmission to humans. Decellularized marine tissues are seen as attractive alternatives due to their similarity to mammalian tissues, reduced biological risks, and less religious restrictions. The aim of this study was to derive an acellular scaffold from the skin of tilapia and evaluate its suitability as a tissue engineering scaffold. Tilapia skin was treated with a series of chemical and enzymatic treatments to remove cellular materials. The decellularized tilapia skin (DTS) was then characterized and evaluated in vitro and in vivo to assess its biological compatibility. The results indicated that the decellularization process removed 99.6% of the DNA content from tilapia skin. The resultant DTS was shown to possess a high denaturation temperature of 68.1 ± 1.0°C and a high Young's modulus of 56.2 ± 14.4 MPa. The properties of DTS were also compared against those of crosslinked electrospun tilapia collagen membrane, another form of tilapia-derived collagen scaffold. In vitro studies revealed that both DTS and crosslinked electrospun tilapia collagen promoted cellular metabolic activity, differentiation, and mineralization of murine preosteogenic MC3T3-E1 cells. The rat calvarial defect model was used to evaluate the in vivo performance of the scaffolds, and both scaffolds did not induce hyperacute rejections. Furthermore, they enhanced bone regeneration in the critical defect compared with the sham control. This study suggests that tilapia-derived scaffolds have great potential in tissue engineering applications.

Improved culture of fastidious Gemmata spp. bacteria using marine sponge skeletons

Gemmata are Planctomycetes bacteria recalcitrant to traditional cultivation in the clinical microbiology laboratory and they have been seldom documented in patients. Based on previously known relationships of Planctomycetes with marine sponges, we designed a new culture medium A incorporating marine sponge skeleton of Spongia sp. to the standard culture medium; and culture medium B incorporating Spongia sp. skeleton heat aqueous filtrate into medium A; and inoculating the three culture media (standard, A and B) with Gemmata obscuriglobus DSM 5831^T and Gemmata massiliana DSM 26013^T in the presence of negative controls. Cultures were observed by naked eyes for 7 days and bacterial growth was quantified by microscopic observations and culture-based enumerations. Macroscopic observations at day-3 revealed a pink bacterial pellet in medium B tubes while standard medium tubes remained limpid until day-8. Growing Gemmata spp. bacteria in medium A yielded air bubbles released by bacterial respiration, whereas control tubes remained bubble-free. The number of colonies in standard medium (1.363 ± 115 for G. obscuriglobus, 1.288 ± 83 for G. massiliana) was significantly lower than those counted from medium B (2.552 ± 128 for G. obscuriglobus, 1.870 ± 112 for G. massiliana) and from medium A (2.851 ± 137 for G. obscuriglobus, 2.035 ± 163 for G. massiliana) (p < 0.10^-4) at day-2 incubation. At day-3 incubation, the number of colonies counted from supplemented media A and B increased up to one log than those counted from the control medium (p < 0.10^-4). Along the following day-4-7 incubation, the number of colonies counted from media A and B remained significantly higher compared to standard medium (p < 0.10^-4). These data indicate that incorporation of spongin-based marine sponge skeleton and heat aqueous filtrate of sponge skeleton significantly improved growth of Gemmata spp. bacteria. These observations pave the way towards improved isolation and culture of Gemmata spp. from environmental and clinical specimens.

Marine Collagen as A Promising Biomaterial for Biomedical Applications

This review focuses on the expanding role of marine collagen (MC)-based scaffolds for biomedical applications. A scaffold-a three-dimensional (3D) structure fabricated from biomaterials-is a key supporting element for cell attachment, growth, and maintenance in 3D cell culture and tissue engineering. The mechanical and biological properties of the scaffolds influence cell morphology, behavior, and function. MC, collagen derived from marine organisms, offers advantages over mammalian collagen due to its biocompatibility, biodegradability, easy extractability, water solubility, safety, low immunogenicity, and low production costs. In recent years, the use of MC as an increasingly valuable scaffold biomaterial has drawn considerable attention from biomedical researchers. The characteristics, isolation, physical, and biochemical properties of MC are discussed as an understanding of MC in optimizing the subsequent modification and the chemistries behind important tissue engineering applications. The latest technologies behind scaffold processing are assessed and the biomedical applications of MC and MC-based scaffolds, including tissue engineering and regeneration, wound dressing, drug delivery, and therapeutic approach for diseases, especially those associated with metabolic disturbances such as obesity and diabetes, are discussed. Despite all the challenges, MC holds great promise as a biomaterial for developing medical products and therapeutics.

Identification and Structure-Activity Relationship of Intestinal Epithelial Barrier Function Protective Collagen Peptides from Alaska Pollock Skin

The effect of collagen peptides (CPs) in intestinal mucosal protection has been approved in both cell and animal models. However, its structure–activity relationship and efficient peptide sequences are unclear, which hinders the in-depth study of its action mechanism and relative nutraceuticals and pharmaceuticals development. In this work, size exclusion chromatography, cation-exchange chromatography, and RP-HPLC were used to separate Alaska pollock skin-derived collagen hydrolysates based on their molecular weight, charge property, and hydrophobicity. The intestinal epithelial barrier function (IEBF) protective effect of separated peptide fractions were evaluated by tumor necrosis factor (TNF)-α-induced Caco-2 cell model. Results indicated that lower molecular weight (500–1000 Da) and higher hydrophilicity of CPs were related to better IEBF protective effect. Two high-efficiency IEBF protective peptide sequences, GPSGPQGSR and GPSGLLGPK with the corresponding molecular weights of 841.41 Da and 824.38 Da, were subsequently identified by UPLC-QToF-MS/MS. Their IEBF protective ability are comparable or even better than the currently used intestinal health supplements glutamine and arginine. The present findings suggested that the hydrophilic CPs, with molecular weight between 500 Da to 1000 Da, should be preferred in IEBF protective peptides preparation. GPSGPQGSR and GPSGLLGPK might have the potential of being IEBF protective ingredients used in intestinal health supplements and drugs.

Natural composite dressings based on collagen, gelatin and plant bioactive compounds for wound healing: A review

Skin wound dressings are commonly used to stimulate and enhance skin tissue repair. Even if wounds seem easy to repair for clinicians and to replicate in an in vitro set-up for scientists, chronic wounds remain currently an open challenge in skin tissue engineering for patients with complementary diseases. The seemingly simple process of skin healing hides a heterogenous sequence of events, specific timing, and high level of organization and coordination among the involved cell types. Taken together, all these aspects make wound healing a unique process, but we are not yet able to completely repair the chronic wounds or to reproduce them in vitro with high fidelity. This review highlights the main characteristics and properties of a natural polymer, which is widely used as biomaterial, namely collagen and of its denatured form, gelatin. Available wound dressings based on collagen/gelatin and proposed variants loaded with bioactive compounds derived from plants are presented. Applications of these composite biomaterials are discussed with emphasis on skin wound healing. A perspective on current issues is given in the light of future research. The emerging technologies support the development of innovative dressings based exclusively on natural constituents, either polymeric or bioactive compounds.

Formulation and characterization of some oil in water cosmetic emulsions based on collagen hydrolysate and vegetable oils mixtures

The present study was focused on the preparation and characterization of different topical oil in water emulsions based on natural ingredients such as collagen hydrolysate and vegetable oils mixtures. As oil phases, mixtures of coconut, almond, jojoba, avocado oils (in different ratios) were used while the water phase consisted in lavender water. As emulsifier, a plant based product containing glyceryl stearate and potassium stearate was incorporated (in the concentration range 4–5 %), while as rheology modifier xanthan gum was used (in the concentration range 0.2–1 %). As preservatives, Cosgard (containing benzyl alcohol, salicylic acid, glycerol, ascorbic acid) and mixtures of two essential oils (lemon and lavender) were selected. The designed formulations were assessed by means of their physico-chemical properties (pH, viscosity, thixotropic behavior), optical microscopy analysis and sensorial characteristics. The obtained emulsions were found to present pseudoplastic and thixotropic behaviors, adequate for cosmetic skin care product formulations.

Influence of the incorporation of marine spongin into a Biosilicate®: an in vitro study

The combination of different biomaterials can be a promising intervention for the composites manufacture, mainly by adding functional and structural characteristics of each material and guarantee the advantages of the use of these composites. In this context, the aim of this study was to develop and evaluated the influence of the incorporation of marine spongin (SPG) into Biosilicate® (BS) in different proportions be used during bone repair. For this purpose, it was to develop and investigate different BS/SPG formulations for physico-chemical and morphological characteristics by pH, loss mass, Fourier transform infrared spectrometer (FTIR) and scanning electron microscope (SEM) analysis. Additionally, the influence of these composites on cell viability, proliferation, and alkaline phosphatase (ALP) activity were investigated. The results revealed that the pH values of all BS groups (with or without SPG) increased over time. A significant mass loss was observed in all composites, mainly with higher SPG percentages. Additionaly, SEM micrographies demonstrated fibers of SPG into BS and material degradation over time. Moreover, FTIR spectral analysis revealed characteristic peaks of PMMA, BS, and SPG in BS/SPG composites. BS/SPG groups demonstrated a positive effect for fibroblast proliferation after 3 and 7 days of culture. Additionally, BS and BS/SPG formulations (at 10% and 20% of SPG) presented similar values of osteoblasts viability and proliferation after 7 days of culture. Furthermore, ALP activity demonstrated no significant difference between BS and BS/SPG scaffolds, at any composition. Based on the present in vitro results, it can be concluded that the incorporation of SPG into BS was possible and produced an improvement in the physical-chemical characteristics and in the biological performance of the graft especially the formulation with 80/20 and 90/10. Future research should focus on in vivo evaluations of this novel composite.

Dietary l-tryptophan alleviated LPS-induced intestinal barrier injury by regulating tight junctions in a Caco-2 cell monolayer model

The intestinal epithelial layer forms a barrier through cell-cell tight junctions and breaking or even slightly disrupting this barrier can lead to serious pathological consequences, including infection and inflammation. Various amino acids have been shown to improve the intestinal tract, but the effect of tryptophan on the intestinal barrier has been controversial. Here, an in vitro Caco-2 cell model was built to investigate the protective and reparative effects of different concentrations of dietary l-Tryptophan (l-Trp) on lipopolysaccharide (LPS)-induced intestinal tight junction injury. Lower concentrations (40 μM) of dietary l-Trp protected and repaired the integrity and permeability injury of the intestinal tight junction induced by LPS, while high concentrations (80 μM) may not have a positive effect. LPS-induced injury led to increased (P < 0.05) mRNA expression of Nuclear factor-kappa B (NFκB) and Myosin light-chain kinase (MLCK), and decreased (P < 0.05) the mRNA expression of extracellular regulated protein kinase 1/2 (ERK1/2) and Mitogen-activated protein (MAP), and the treatment of dietary l-Trp alleviated those regulations in different concentrations, which suggests that dietary l-Trp may attenuate LPS-induced injury to tight junctions via inhibiting the NFκB-MLCK signaling pathway and activating the ERK1/2-MAP signaling pathway. And the mRNA and protein expressions of claudin-1, occludin and ZO-1 in LPS-induced injury were all down-regulated to varying degrees, and dietary l-Trp weakened the down-regulation of claudin-1 (P < 0.05) with no significant regulation of the protein expression of occludin and ZO-1 (P > 0.05).

Collagen Extracted from Bigeye Tuna (Thunnus obesus) Skin by Isoelectric Precipitation: Physicochemical Properties, Proliferation, and Migration Activities

Collagen was extracted from bigeye tuna (Thunnus obesus) skins by salting-out (PSC-SO) and isoelectric precipitation (PSC-IP) methods. The yield of the PSC-IP product was approximately 17.17% (dry weight), which was greater than the yield obtained from PSC-SO (14.14% dry weight). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis indicated that collagen from bigeye tuna skin belongs to collagen type I. Inductively coupled plasma mass spectrometry results indicate that the heavy metal abundance in PSC-IP was lower than the maximum acceptable amounts according to Chinese regulatory standards. In addition, results from a methylthiazolyldiphenyl-tetrazolium bromide assay and an in vitro scratch assay demonstrated that PSC-IP could promote the proliferation and migration of NIH-3T3 fibroblasts. Overall, results suggest PSC-IP could be used to rapidly extract collagen from marine by-products instead of traditional salting-out methods. Collagen from bigeye tuna skin may also have strong potential for cosmetic and biomedical applications.

Collagen-based bioinks for hard tissue engineering applications: a comprehensive review

In the last few years, additive manufacturing (AM) has been gaining great interest in the fabrication of complex structures for soft-to-hard tissues regeneration, with tailored porosity, and boosted structural, mechanical, and biological properties. 3D printing is one of the most known AM techniques in the field of biofabrication of tissues and organs. This technique opened up opportunities over the conventional ones, with the capability of creating replicable, customized, and functional structures that can ultimately promote effectively different tissues regeneration. The uppermost component of 3D printing is the bioink, i.e. a mixture of biomaterials that can also been laden with different cell types, and bioactive molecules. Important factors of the fabrication process include printing fidelity, stability, time, shear-thinning properties, mechanical strength and elasticity, as well as cell encapsulation and cell-compatible conditions. Collagen-based materials have been recognized as a promising choice to accomplish an ideal mimetic bioink for regeneration of several tissues with high cell-activating properties. This review presents the state-of-art of the current achievements on 3D printing using collagen-based materials for hard tissue engineering, particularly on the development of scaffolds for bone and cartilage repair/regeneration. The ultimate aim is to shed light on the requirements to successfully print collagen-based inks and the most relevant properties exhibited by the so fabricated scaffolds. In this regard, the adequate bioprinting parameters are addressed, as well as the main materials properties, namely physicochemical and mechanical properties, cell compatibility and commercial availability, covering hydrogels, microcarriers and decellularized matrix components. Furthermore, the fabrication of these bioinks with and without cells used in inkjet printing, laser-assisted printing, and direct in writing technologies are also overviewed. Finally, some future perspectives of novel bioinks are given.