Chitosan nanoparticles: Preparation, size evolution and stability

Characteristics, Cryoprotection Evaluation and In Vitro Release of BSA-Loaded Chitosan Nanoparticles

Chitosan nanoparticles (CS-NPs) are under increasing investigation for the delivery of therapeutic proteins, such as vaccines, interferons, and biologics. A large number of studies have been taken on the characteristics of CS-NPs, and very few of these studies have focused on the microstructure of protein-loaded NPs. In this study, we prepared the CS-NPs by an ionic gelation method, and bovine serum albumin (BSA) was used as a model protein. Dynamic high pressure microfluidization (DHPM) was utilized to post-treat the nanoparticles so as to improve the uniformity, repeatability and controllability. The BSA-loaded NPs were then characterized for particle size, Zeta potential, morphology, encapsulation efficiency (EE), loading capacity (LC), and subsequent release kinetics. To improve the long-term stability of NPs, trehalose, glucose, sucrose, and mannitol were selected respectively to investigate the performance as a cryoprotectant. Furthermore, trehalose was used to obtain re-dispersible lyophilized NPs that can significantly reduce the dosage of cryoprotectants. Multiple spectroscopic techniques were used to characterize BSA-loaded NPs, in order to explain the release process of the NPs in vitro. The experimental results indicated that CS and Tripolyphosphate pentasodium (TPP) spontaneously formed the basic skeleton of the NPs through electrostatic interactions. BSA was incorporated in the basic skeleton, adsorbed on the surface of the NPs (some of which were inlaid on the NPs), without any change in structure and function. The release profiles of the NPs showed high consistency with the multispectral results.

Production, physicochemical characterization, and anticancer activity of methotrexate-loaded phytic acid-chitosan nanoparticles on HT-29 human colon adenocarcinoma cells

Methotrexate-loaded phytic acid-chitosan nanoparticles were synthesized by ionic gelation assisted by high-intensity sonication. The nanoparticles were characterized by particle size, polydispersity index, zeta potential (ZP) and encapsulation efficiency. Their physical stability was evaluated at 4 °C and 40 °C, whereas the in-vitro methotrexate release was assessed at pH 7.4. The data were heuristically fit to first-order, Higuchi, Peppas-Sahlin and Korsmeyer-Peppas models of release kinetics. Anticancer activity was evaluated using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazoliumbromide (MTT) assay on HT-29 human colon adenocarcinoma cells. Physicochemical analysis showed that the nanoparticles presented positive ZP values, sizes less than <300 nm and low polydispersity, except for systems formed with low amplitude sonication. The nanoparticles exhibited an adequate physical stability and a capability to modify methotrexate release by a non-Fickian mechanism, resulting in a more pronounced cytotoxic effect than the free drug on HT-29 human colon adenocarcinoma cells.

Release mechanisms of bovine serum albumin loaded-PLGA microspheres prepared by ultra-fine particle processing system

The ultra-fine particle processing system (UPPS) previously developed by our lab has been used to prepare various microparticulate formulations. Microspheres prepared by UPPS can achieve sustained release with a reduced initial burst compared to the microspheres prepared by the conventional water-in-oil-in-water (W/O/W) double emulsion technique. However, the in vitro drug release mechanism of the microspheres prepared by UPPS is still uninvestigated. This study aimed to investigate the mechanisms of bovine serum albumin (BSA) released from poly (D,L-lactic-co-glycolic acid) (PLGA) microspheres prepared by UPPS in comparison with microspheres prepared by the W/O/W double emulsion technique. The morphology, in vitro drug release, water uptake, and structural evolution of microspheres prepared by both techniques were evaluated. UPPS microspheres showed solid and compact internal structures without any pores or channels thereby exhibiting a reduced rate of water permeation in the release medium. In addition, the release of BSA in UPPS microspheres was mainly controlled by the erosion of the polymer matrix during the entire process, while BSA was released from W/O/W microspheres by both drug diffusion and matrix erosion. Moreover, the observed surface and internal structural evolution also confirmed their different release mechanisms. This work elaborates the release mechanism of PLGA microspheres prepared by UPPS and facilitates the design of microparticulate formulations. Graphical abstract.

Preparation and Characterization of Chitosan Coated PLGA Nanoparticles of Resveratrol: Improved Stability, Antioxidant and Apoptotic Activities in H1299 Lung Cancer Cells

Resveratrol (RES) is a polyphenolic compound which has shown beneficial pharmacological effects such as anti-inflammatory, antioxidant, and anti-cancer effects. However, poor aqueous solubility, bioavailability, and low stability are the major limitations to the clinical application of RES. Therefore, in the present study, chitosan (CS) coated PLGA nanoparticles of RES (CS-RES-PLGA NPs) was developed, characterized and its anticancer activity was evaluated in the H1299 lung carcinoma cell line. The effects of the increase in CS coating and cryoprotectant concentration on particle size, polydispersity index (PDI) and zeta potential (ZP) were determined. The particle size, PDI, ZP and entrapment efficiency of the optimized CS-RES-PLGA NPs were found to be 341.56 ± 7.90 nm, 0.117 ± 0.01, 26.88 ± 2.69 mV and 75.13% ± 1.02% respectively. The average particle size and ZP showed a steady increase with an increase in CS concentration. The increase in positive zeta potential is evident for higher CS concentrations. The effect of trehalose as cryoprotectant on average particle size was decreased significantly (p < 0.05) when it was increased from 1%−5% w/v. TEM and SEM showed uniform particle distribution with a smooth surface and spherical shape. The CS coating provides modulation of in vitro drug release and showed a sustained release pattern. The stability of RES loaded PLGA NPs was improved by CS coating. CS-coated NPs showed greater cytotoxicity and apoptotic activities compared to free RES. The CS coated NPs had a higher antioxidant effect than the free RES. Therefore, CS coated PLGA NPs could be a potential nanocarrier of RES to improve drug solubility, entrapment, sustain release, stability and therapeutic application.

Facile synthesis and characterizations of antibacterial and antioxidant of chitosan monoterpene nanoparticles and their applications in preserving minced meat

Chitosan nanoparticles loaded monoterpenes (ChMNPs) were prepared for preservation of minced meat from oxidative changes and growth of microorganisms. Four monoterpenes (limonene, linalool, menthol and thymol) were used to synthesis of four different types of ChMNPs. The physicochemical characteristics of nanoparticles were analyzed using Scanning electron microscopy (SEM) and Zeta potential. SEM showed that the nanoparticles were nearly uniformly shape and size and the zeta potential values ranged between 0.0346 and -0.1690 mV. In vitro antimicrobial activity of Ch, monoterpenes (M) and ChMNPs against Gram (-) bacteria Escherichia coli (ATCC 8739) and Salmonella typhimurium (ATCC 1402) was analyzed using serial dilution test. E. coli was more susceptible than S. typhimurium to these products. ChMNPs exhibited good in vivo antimicrobial and antioxidant property for the minced meat samples during refrigerated storage. Verification of testing hypothesis was performed by assessing a DPPH radical scavenging activity, peroxide value and E. coli reduction of experimental nanoparticles. Significant effects of ChMNPs were observed at 1000 and 2500 mg/kg on the total number of E. coli in meat samples during storage time. The results indicate that ChMNPs can be used to preserve food as antimicrobial agents and to extend shelf life.

How the Lack of Chitosan Characterization Precludes Implementation of the Safe-by-Design Concept

Efficacy and safety of nanomedicines based on polymeric (bio)materials will benefit from a rational implementation of a Safe-by-Design (SbD) approach throughout their development. In order to achieve this goal, however, a standardization of preparation and characterization methods and their accurate reporting is needed. Focusing on the example of chitosan, a biopolymer derived from chitin and frequently used in drug and vaccine delivery vector preparation, this review discusses the challenges still to be met and overcome prior to a successful implementation of the SbD approach to the preparation of chitosan-based protein drug delivery systems.

Intranasally administered protein coated chitosan nanoparticles encapsulating influenza H9N2 HA2 and M2e mRNA molecules elicit protective immunity against avian influenza viruses in chickens

Chitosan nanoparticles (CNPs) represent an efficient vaccination tool to deliver immunogenic antigens to the antigen-presenting cells (APCs), which subsequently stimulate protective immune responses against infectious diseases. Herein, we prepared CNPs encapsulating mRNA molecules followed by surface coating with conserved H9N2 HA2 and M2e influenza proteins. We demonstrated that CNPs efficiently delivered mRNA molecules into APCs and had effectively penetrated the mucosal barrier to reach to the immune initiation sites. To investigate the potential of CNPs delivering influenza antigens to stimulate protective immunity, we intranasally vaccinated chickens with empty CNPs, CNPs delivering HA2 and M2e in both mRNA and protein formats (CNPs + RNA + Pr) or CNPs delivering antigens in protein format only (CNPs + Pr). Our results demonstrated that chickens vaccinated with CNPs + RNA + Pr elicited significantly (p < 0.05) higher systemic IgG, mucosal IgA antibody responses and cellular immune responses compared to the CNPs + Pr vaccinated group. Consequently, upon challenge with either H7N9 or H9N2 avian influenza viruses (AIVs), efficient protection, in the context of viral load and lung pathology, was observed in chickens vaccinated with CNPs + RNA + Pr than CNPs + Pr vaccinated group. In conclusion, we show that HA2 and M2e antigens elicited a broad spectrum of protection against AIVs and incorporation of mRNAs in vaccine formulation is an effective strategy to induce superior immune responses.

In vitro Antifungal Activity of Olive (Olea europaea) Leaf Extracts Loaded in Chitosan Nanoparticles

Olive leaf extract is characterized by a high content of phenols and flavonoids (oleuropein, luteolin, and their derivatives). These compounds are defined as secondary metabolites and exert such as anti-inflammatory, antioxidant, and antimicrobial activities. We investigated the in vitro antifungal activity of two olive leaf extracts (named EF1 and EF2) against a Fusarium proliferatum (AACC0215) strain that causes diseases to many economically important plants and synthesizing diverse mycotoxins. In this work, we aimed to identify the most appropriate concentration between the tested two olive leaf extracts to develop a safe, stable and efficient drug delivery system. Qualitative and quantitative analyses of the two olive leaf extracts by (HPLC) were performed. Furthermore, we also evaluated the antifungal effects of the two leaf extracts when encapsulated in chitosan-tripolyphosphate nanoparticles. The major compound in both EF1 and EF2 was oleuropein, with 336 and 603 mg/g, respectively, however, high concentrations of flavonoid were also present. EF1 and EF2 showed a concentration depended effect on F. proliferatum (AACC0215) viability. Our results showed a great efficacy of EF1/nanoparticles at the higher concentration tested (12X) against the target species. In this case, we observed an inhibition rate to both germination and growth of 87.96 and 58.13%, respectively. We suggest that EF1 olive leaf extracts, as free or encapsulated in chitosan-tripolyphosphate nanoparticles, could be used as fungicides to control plant diseases. Finally, future application of these findings may allow to reduce the dosage of fungicides potentially harmful to human health.

Nanocrystals of Fusidic Acid for Dual Enhancement of Dermal Delivery and Antibacterial Activity: In Vitro, Ex Vivo and In Vivo Evaluation

With the alarming rise in incidence of antibiotic-resistant bacteria and the scarcity of newly developed antibiotics, it is imperative that we design more effective formulations for already marketed antimicrobial agents. Fusidic acid (FA), one of the most widely used antibiotics in the topical treatment of several skin and eye infections, suffers from poor water-solubility, sub-optimal therapeutic efficacy, and a significant rise in FA-resistant Staphylococcus aureus (FRSA). In this work, the physico-chemical characteristics of FA were modified by nanocrystallization and lyophilization to improve its therapeutic efficacy through the dermal route. FA-nanocrystals (NC) were prepared using a modified nanoprecipitation technique and the influence of several formulation/process variables on the prepared FA-NC characteristics were optimized using full factorial statistical design. The optimized FA-NC formulation was evaluated before and after lyophilization by several in-vitro, ex-vivo, and microbiological tests. Furthermore, the lyophilized FA-NC formulation was incorporated into a cream product and its topical antibacterial efficacy was assessed in vivo using a rat excision wound infection model. Surface morphology of optimized FA-NC showed spherical particles with a mean particle size of 115 nm, span value of 1.6 and zeta potential of −11.6 mV. Differential scanning calorimetry and powder X-ray diffractometry confirmed the crystallinity of FA following nanocrystallization and lyophilization. In-vitro results showed a 10-fold increase in the saturation solubility of FA-NC while ex-vivo skin permeation studies showed a 2-fold increase in FA dermal deposition from FA-NC compared to coarse FA. Microbiological studies revealed a 4-fofd decrease in the MIC against S. aureus and S. epidermidis from FA-NC cream compared to commercial Fucidin cream. In-vivo results showed that FA-NC cream improved FA distribution and enhanced bacterial exposure in the infected wound, resulting in increased therapeutic efficacy when compared to coarse FA marketed as Fucidin cream.

Chrysin-Loaded Chitosan Nanoparticles Potentiates Antibiofilm Activity against Staphylococcus aureus

The application of nanotechnology in medicine is gaining popularity due to its ability to increase the bioavailability and biosorption of numerous drugs. Chrysin, a flavone constituent of Orocylumineicum vent is well-reported for its biological properties. However, its therapeutic potential has not been fully exploited due to its poor solubility and bioavailability. In the present study, chrysin was encapsulated into chitosan nanoparticles using TPP as a linker. The nanoparticles were characterized and investigated for their anti-biofilm activity against Staphylococcus aureus. At sub-Minimum Inhibitory Concentration, the nanoparticles exhibited enhanced anti-biofilm efficacy against S. aureus as compared to its bulk counterparts, chrysin and chitosan. The decrease in the cell surface hydrophobicity and exopolysaccharide production indicated the inhibitory effect of the nanoparticles on the initial stages of biofilm development. The growth curve analysis revealed that at a sub-MIC, the nanoparticles did not exert a bactericidal effect against S. aureus. The findings indicated the anti-biofilm activity of the chrysin-loaded chitosan nanoparticles and their potential application in combating infections associated with S. aureus.

Oral Deliverable Mucoadhesive Chitosan-Salmonella Subunit Nanovaccine for Layer Chickens

PURPOSE

Salmonellosis in poultry is a serious economic burden. A major concern is the public health hazard caused by consumption of Salmonella-contaminated poultry products. Currently used Salmonella vaccines are ineffective in combating poultry Salmonellosis warranting the need of a potent vaccine, especially an oral vaccine that can elicit robust local intestinal immunity.

MATERIALS AND METHODS

A Salmonella subunit chitosan nanoparticles (NPs)-based vaccine was prepared that contained immunogenic outer membrane proteins (OMPs) and -flagellin (F) protein (OMPs-F-CS NPs). OMPs-F-CS NPs were administered as an oral vaccine in layer chickens and the resultant humoral and cell-mediated immune responses and localization of NPs were examined using standard detection methods.

RESULTS

We demonstrated targeting of surface F-protein coated chitosan NPs to immune cells when delivered orally to layer chickens, the particles were localized in ileal Peyer's patches. The OMPs-F-CS NPs vaccinated layer chickens had significantly higher OMPs-specific mucosal IgA production and lymphocyte proliferation response. The candidate vaccine increased the expression of toll-like receptor (TLR)-2, TLR-4, IFN-γ, TGF-ß and IL-4 mRNA expression in chicken cecal tonsils.

CONCLUSION

Our study demonstrated that the chitosan-based oral Salmonella nanovaccine targets immune cells of chickens and induced antigen-specific B and T cell responses. This candidate oral Salmonella nanovaccine has the potential to mitigate Salmonellosis in poultry.

PLGA nanoparticle preparations by emulsification and nanoprecipitation techniques: effects of formulation parameters

This study presents the influence of the primary formulation parameters on the formation of poly-dl-lactic-co-glycolic nanoparticles by the emulsification-solvent evaporation, and the nanoprecipitation techniques. In the emulsification-solvent evaporation technique, the polymer and tensoactive concentrations, the organic solvent fraction, and the sonication amplitude effects were analyzed. Similarly, in the nanoprecipitation technique the polymer and tensoactive concentrations, the organic solvent fraction and the injection speed were varied. Additionally, the agitation speed during solvent evaporation, the centrifugation speeds and the use of cryoprotectants in the freeze-drying process were analyzed. Nanoparticles were characterized by dynamic light scattering, laser Doppler electrophoresis, and scanning electron microscopy, and the results were evaluated by statistical analysis. Nanoparticle physicochemical characteristics can be adjusted by varying the formulation parameters to obtain specific sizes and stable nanoparticles. Also, by adjusting these parameters, the nanoparticle preparation processes have the potential to be tuned to yield nanoparticles with specific characteristics while maintaining reproducible results.

Chitin/chitosan derivatives and their interactions with microorganisms: a comprehensive review and future perspectives

Chitosan, obtained as a result of the deacetylation of chitin, one of the most important naturally occurring polymers, has antimicrobial properties against fungi, and bacteria. It is also useful in other fields, including: food, biomedicine, biotechnology, agriculture, and the pharmaceutical industries. A literature survey shows that its antimicrobial activity depends upon several factors such as: the pH, temperature, molecular weight, ability to chelate metals, degree of deacetylation, source of chitosan, and the type of microorganism involved. This review will focus on the in vitro and in vivo antimicrobial properties of chitosan and its derivatives, along with a discussion on its mechanism of action during the treatment of infectious animal diseases, as well as its importance in food safety. We conclude with a summary of the challenges associated with the uses of chitosan and its derivatives.

Chitosan-modified hyaluronic acid-based nanosized drug carriers

Fabrication possibilities, detailed size and structural characterization of biodegradable chitosan (Chit) polysaccharide-modified hyaluronic acid (HyA)-based colloidal carriers are demonstrated. The negatively charged and highly hydrophilic HyA polymer chains have been ionically modified by positively charged pure Chit and crosslinked Chit macromolecules at various Chit/HyA weight ratios, which resulted in the formation of carrier nanoparticles (NPs) having three different nanostructures depending on the polymer concentrations. Electrostatically-compensated Chit/HyA polymer coils with loose colloidal structure, tripolyphosphate (TPP)-crosslinked Chit-TPP/HyA NPs having interpenetrating polymer network and well-defined Chit-TPP_core-HyA_shell NPs with diameters of 100-300 nm were also prepared and were loaded with tocopherol (TCP) and cholecalciferol (D3) having Vitamin E and D activity, respectively. By using rheological, particle charge titration and conductivity studies we first confirmed that the expected 1:1 Chit/HyA monomer molar ratio is strongly influenced by the pH of the polymer solutions as well as the deacetylation degree of Chit which are crucial factors for the solubility, purity and the quality of the commercially available biocompatible Chit in aqueous medium. Encapsulation studies revealed that D3 could be better incorporated in every system, especially in Chit-TPP/HyA NPs, while for TCP the simple Chit/HyA polymer coils were the most promising carriers.

Optimized immobilization of endoglucanase Cel9A onto glutaraldehyde activated chitosan nanoparticles by response surface methodology: The study of kinetic behaviors

Immobilization of enzyme onto nanoparticles such as chitosan can have biotechnological importance. In this study, chitosan nanoparticles (ChNPs) were prepared by Ionic gelation method and Endoglucanase Cel9A from Alicyclobacillus acidocaldariius (AaCel9A) immobilized on the nanoparticles. The FTIR results showed that the enzymes were immobilized on the ChNPs. The dynamic light scattering and scanning electron microscope (SEM) results illustrated that the AaCel9A-ChNPs approximately had 40 nm diameters. For optimizing enzyme immobilization, response surface methodology was employed using different variables (pH, enzyme immobilization time, and enzyme to ChNPs ratio [E/Cs]). The results showed that the high immobilization efficiency was achieved in pH 7, E/Cs of 0.4 in 2.63 hr. The enzyme activity results showed that, immobilization increased optimum pH for activity (from 6.5 to 7.5) and the enzyme K_m (from 3.703 to 12.195 [mg/ml]), which make it suitable to use in some industries such as detergents.

Production and Characterization of Chitosan-Polyanion Nanoparticles by Polyelectrolyte Complexation Assisted by High-Intensity Sonication for the Modified Release of Methotrexate

A promising strategy to improve the effectivity of anticancer treatment and decrease its side effects is to modulate drug release by using nanoparticulates (NPs) as carriers. In this study, methotrexate-loaded chitosan-polyanion nanoparticles were produced by polyelectrolyte complexation assisted by high-intensity sonication, using several anionic polymers, such as the sodium and potassium salts of poly(maleic acid-alt-ethylene) and poly(maleic acid-alt-octadecene), here named PAM-2 and PAM-18, respectively. Such NPs were analyzed and characterized according to particle size, polydispersity index, zeta potential and encapsulation efficiency. Likewise, their physical stability was tested at 4 °C and 40 °C in order to evaluate any change in the previously mentioned particle parameters. The in vitro methotrexate release was assessed at a pH of 7.4, which simulated physiological conditions, and the data were fitted to the heuristic models of order one, Higuchi, Peppas-Sahlin and Korsmeyer-Peppas. The results revealed that most of the MTX-chitosan-polyanion NPs have positive zeta potential values, sizes <280 nm and monodisperse populations, except for the NPs formed with PAM-18 polyanions. Further, the NPs showed adequate physical stability, preventing NP-NP aggregation. Likewise, these carriers modified the MTX release by an anomalous mechanism, where the NPs formed with PAM-2 polymer led to a release mechanism controlled by diffusion and relaxation, whereas the NPs formed with PAM-18 led to a mainly diffusion-controlled release mechanism.

Globular protein stabilized nanoparticles for delivery of disulfiram: fabrication, characterization, in vitro toxicity, and cellular uptake

Disulfiram (DSF), an FDA-approved anti-alcoholic drug, has recently shown that it possesses anti-cancer effects. However, DSF is hydrophobic in nature with less stability. Therefore, new approaches are required for the effective delivery of DSF to treat cancers. Herein, we prepared DSF loaded soy protein isolate (SPI) nanosuspension (Ns) for enhancing the anti-cancer delivery of DSF. The optimized DSF-SPI-Ns had an average particle size of 164.28 ± 2.07 nm with a narrow size distribution of 0.217 ± 0.035 and zeta potential around −22.30 ± 2.11 mV, respectively. The highest drug loading and entrapment efficiency achieved was 5.516 ± 1.98%, and 91.61 ± 1.15%, respectively. The surface morphology of Ns was revealed by TEM, and the FTIR DSC, PXRD, and TGA were used for physicochemical characterization. Further, fluorescence spectroscopy and molecular docking studies were carried out to understand the interactions between (SPI and DSF) and binding sites of DSF on the surface of SPI, respectively. In vitro release studies showed a sustained release pattern and followed a Fickian diffusion release from the Ns. The in vitro cytotoxicity of SPI indicated the excellent biocompatibility, and DSF-SPI-Ns were found to be more cytotoxic compared to the free DSF solution. Moreover, the cellular uptake studies also indicated the effective delivery of the formulation to the cancer cells. Results of the current study suggested that the SPI coated Ns might be a promising drug delivery system for hydrophobic DSF, and the potential application of SPI as a coating/stabilizing agent for the delivery of hydrophobic/hydrophilic cancer therapeutics.

Disulfiram (DSF), an FDA-approved anti-alcoholic drug, has recently shown that it possesses anti-cancer effects.

Stabilization of chitosan-based polyelectrolyte nanoparticle cargo delivery biomaterials by a multiple ionic cross-linking strategy

PolyElectrolyte Nanoparticles (PENs) obtained by layer-by-layer self-assembly of polycations/polyanions suffer from a lack of colloidal stability in physiological conditions. We report a simple innovative approach for increasing their stability by multiple ionic cross-linkers. Herein, a chitosan-based core was stabilized by polyanions such as tripolyphosphate and dextran sulfate at pHs of 3 (aPENs) and 8 (bPENs) to improve the quality of electrostatic interactions in the core and manage self-assembly of polyethyleneimine shell onto the core. The physicochemical properties of the particles were characterized by DLS, SEM, TEM, FT-IR, and TGA. TEM micrographs showed visible core/shell structures of bPENs. From particle size and polydispersity indices, the bPENs stability was salt concentration-dependent. The release profiles of PENs using nicotinic acid demonstrated sustained release in a pH-independent manner with a good fit of Korsmeyer-Peppas model. These results suggest that multiple ionic cross-linkers can be an efficient approach to increase the colloidal stability of PENs.

Impact of Crystalline Structural Differences Between α- and β-Chitosan on Their Nanoparticle Formation Via Ionic Gelation and Superoxide Radical Scavenging Activities

α- and β-Chitosan nanoparticles were obtained from shrimp shell and squid pen chitosan with different set of deacetylation degree (%DD) and molecular weight (MW) combinations. After nanoparticle formation via ionic gelation with sodium tripolyphosphate (TPP), the % crystallinity index (%CI) of the α- and β-chitosan nanoparticles were reduced to approximately 33% and 43% of the initial %CI of the corresponding α- and βchitosan raw samples, respectively. Both forms of chitosan and chitosan nanoparticles scavenged superoxide radicals in a dose-dependent manner. The %CI of α- and β-chitosan and chitosan nanoparticles was significantly negatively correlated with superoxide radical scavenging abilities over the range of concentration (0.5, 1, 2 and 3 mg/mL) studied. High %DD, and low MW β-chitosan exhibited the highest superoxide radical scavenging activity (p < 0.05). α- and β-Chitosan nanoparticles prepared from high %DD and low MW chitosan demonstrated the highest abilities to scavenge superoxide radicals at 2.0-3.0 mg/mL (p < 0.05), whereas α-chitosan nanoparticles, with the lowest %CI, and smallest particle size (p < 0.05), prepared from medium %DD, and medium MW chitosan showed the highest abilities to scavenge superoxide radicals at 0.5-1.0 mg/mL (p < 0.05). It could be concluded that α- and β-chitosan nanoparticles had superior superoxide radical scavenging abilities than raw chitosan samples.

Preparation, in vitro and in vivo evaluation of PLGA/Chitosan based nano-complex as a novel insulin delivery formulation

The smart self-regulated drug delivery systems for insulin administration are desirable to achieve glycemic control, and decrease the long-term micro- and macro vascular complications. In this study, we developed an injectable nano-complex formulation for closed-loop insulin delivery after subcutaneous administration and release of insulin in response to increased blood glucose levels. The nano-complex was prepared by mixing oppositely charged chitosan and PLGA nanoparticles. PLGA nanoparticles were prepared using double-emulsion solvent diffusion method, and were loaded with glucose oxidase (GOx) and catalase (CAT) enzymes. These negatively charged particles decrease micro-environmental pH, by gluconic acid production in the glucose molecules presence. Positively charged chitosan nanoparticles were prepared using ionic gelation method, and were loaded with insulin. These nanoparticles (NPs) released insulin by dissociation in acidic pH caused by the GOx activity. Following in vitro studies, in vivo evaluation of nano-complex formulations in streptozocin induced diabetic rats showed significant glycemic regulation up to 98 h after subcutaneous administration.

Effect of Polysaccharide Sources on the Physicochemical Properties of Bromelain-Chitosan Nanoparticles

Bromelain, a set of proteolytic enzymes potential pharmaceutical applications, was encapsulated in chitosan nanoparticles to enhance enzyme stability, and the effect of different chitosan sources was evaluated. Chitosan types (i.e., low molecular weight chitosan, chitosan oligosaccharide lactate, and chitosan from shrimp shells) produced nanoparticles with different physicochemical properties, however in all cases, particle size and zeta potential decreased, and polydispersity index increased after bromelain addition. Bromelain encapsulation was higher than 84% and 79% for protein content and enzymatic activity, respectively, with low molecular weight chitosan presenting the highest encapsulation efficiency. Nanoparticle suspension was also tested for accelerated stability and rheological behavior. For the chitosan-bromelain nanoparticles, an instability index below 0.3 was recorded and, in general, the loading of bromelain in chitosan nanoparticles decreased the cohesiveness of the final suspension.

Recent progress in biomedical applications of chitosan and its nanocomposites in aquaculture: A review

Chitosan nanoparticles (CSNPs) are the nanostructures of chitosan biopolymer which is derived from chitin polysaccharide, the main component of crustacean shells. Chitosan is a biocompatible, nontoxic and biodegradable polymer soluble in acidic solutions and easily excreted from kidneys. It is widely used in medical and pharmaceutical applications including artificial matrices for tissue engineering, drug transport, targeted drug delivery and protein or gene delivery. The antimicrobial activities of chitosan and CSNPS against different bacterial, fungal and viral pathogens made them valuable for several biological applications including food preservation purposes. In addition, they have immunomodulatory effects on fish and crustaceans providing direct positive impact on aquaculture and fish farming industry. Sustained release of some bioactive ingredients such as hormones, vitamins, nutrients and antioxidants has improved the biological activities of fish. Furthermore, CSNPs have recently been employed to diagnose fish diseases. In this review, we present the medical and biological applications of chitosan and CSNPs on aquatics to provide an update on recent advances and the potential for further advanced applications for aquaculture in the future.

Modified chitosan-based nanoadjuvants enhance immunogenicity of protein antigens after mucosal vaccination

Nasal vaccination is considered to be an effective and convenient way of increasing immune responses both systemically and locally. Although various nanovaccine carriers have been introduced as potential immune adjuvants, further improvements are still needed before they can be taken to clinical usage. Chitosan-based nanovaccine carriers are one of the most widely studiedadjuvants, owing to the abilityof chitosan toopen tight junctions between nasal epithelial cells and enhance particle uptake as well as its inherent immune activating role. In present study, bovine serum albumin (BSA) loaded nanoparticles were prepared using novel aminated (aChi) and aminated plus thiolated chitosan (atChi) polymers, to further enhance mucoadhesiveness and adjuvanticity of the vaccine system by improving electrostatic interactions of polymers with negatively charged glycoproteins. Nanocarriers with optimum size and surface charge, high encapsulation efficiency of model antigen and good stability were developed. Negligible toxicity was observed in Calu-3 and A549 cell lines. In vivo studies, revealed high levels of systemic antibodies (IgG, IgG₁ and IgG_2a) throughout the study and presence of sIgA in vaginal washes showed that common mucosal system was successfully stimulated. Cytokine levels indicated a mixed Th1/Th2 immune response. A shift towards cellular immune responses was observed after nasal immunisation with antigen loaded nanoparticle formulations. These nanoparticles exhibit great potential for nasal application of vaccines.

Recent advances in nanotherapeutic strategies for spinal cord injury repair

Spinal cord injury (SCI) is a devastating and complicated condition with no cure available. The initial mechanical trauma is followed by a secondary injury characterized by inflammatory cell infiltration and inhibitory glial scar formation. Due to the limitations posed by the blood-spinal cord barrier, systemic delivery of therapeutics is challenging. Recent development of various nanoscale strategies provides exciting and promising new means of treating SCI by crossing the blood-spinal cord barrier and delivering therapeutics. As such, we discuss different nanomaterial fabrication methods and provide an overview of recent studies where nanomaterials were developed to modulate inflammatory signals, target inhibitory factors in the lesion, and promote axonal regeneration after SCI. We also review emerging areas of research such as optogenetics, immunotherapy and CRISPR-mediated genome editing where nanomaterials can provide synergistic effects in developing novel SCI therapy regimens, as well as current efforts and barriers to clinical translation of nanomaterials.

Development, characterization, and in vitro-in vivo evaluation of polymeric nanoparticles containing miconazole and farnesol for treatment of vulvovaginal candidiasis

Vulvovaginal candidiasis (VVC) is caused mainly by the opportunistic fungus Candida albicans, and its yeast to hyphae transition is considered a major virulence factor. Farnesol is a molecule that inhibits yeast to hyphae transition. The increased incidence of VVC has influenced a need for developing new therapeutic strategies. The objective was to develop a mucoadhesive nanostructured system composed of miconazole and farnesol co-encapsulated within chitosan nanoparticles. The miconazole presented a minimal inhibitory concentration (MIC) of 1 μg/ml against C. albicans. The farnesol was capable of inhibiting yeast to hyphae transition at levels greater or equal to 300 μM. The combination of miconazole and farnesol showed no change in miconazole MIC. Chitosan nanoparticles containing miconazole and farnesol were prepared by ionic gelation and showed favorable characteristics for use on mucous membranes. They showed size variation and polydispersion index (PDI) after 30 days, but the efficiency of drug encapsulation was maintained. Regarding toxicity in cultured fibroblasts (BALB/c 3T3) the nanoparticles were considered nontoxic. The nanoparticles showed antifungal activity against the C. albicans strain used with MICs of 2.5 μg/ml and 2 μg/ml for nanoparticles containing miconazole or miconazole/farnesol, respectively. Nanoparticles containing farnesol inhibited yeast to hyphae transition at concentrations greater than or equal to 240 μM. The in vivo antifungal activity was assessed in the murine model for VVC. The results suggested that chitosan nanoparticles containing miconazole and farnesol were effective at inhibiting fungal proliferation. Additionally, chitosan nanoparticles containing farnesol were capable of decreasing the pathogenicity of infection, demonstrated through the absence of inflammation.

Crosstalk between chitosan and cell signaling pathways

The field of tissue engineering (TE) experiences its most exciting time in the current decade. Recent progresses in TE have made it able to translate into clinical applications. To regenerate damaged tissues, TE uses biomaterial scaffolds to prepare a suitable backbone for tissue regeneration. It is well proven that the cell-biomaterial crosstalk impacts tremendously on cell biological activities such as differentiation, proliferation, migration, and others. Clarification of exact biological effects and mechanisms of a certain material on various cell types promises to have a profound impact on clinical applications of TE. Chitosan (CS) is one of the most commonly used biomaterials with many promising characteristics such as biocompatibility, antibacterial activity, biodegradability, and others. In this review, we discuss crosstalk between CS and various cell types to provide a roadmap for more effective applications of this polymer for future uses in tissue engineering and regenerative medicine.

Immobilization of endoglucanase Cel9A on chitosan nanoparticles leads to its stabilization against organic solvents: the use of polyols to improve the stability

The immobilization of enzymes improves their stability in non-conventional media such as organic solvents. In this work, the effects of solvents (DMSO, methanol, ethanol, and n-propanol) on the endoglucanase Cel9A activity and stability were studied. Then, the enzymes were stabilized by its immobilization on chitosan nanoparticles and also using polyols (sorbitol and glycerol) against organic solvents. The SEM results illustrated that the chitosan nanoparticles had about 40 nm diameter. The results indicated that the organic solvents, especially n-propanol, decreased the activity of the free and immobilized enzymes. The reduced activity of the immobilized enzyme was less than that of the free enzyme. Our studies about the enzymes' stability showed that the free and immobilized enzymes in hydrophobic solvents (with high log P) had the lowest stability compared to other solvents as we observed the half-life of the free enzyme in n-propanol solvent was 2.84 min, and the half-life of the immobilized enzyme was 4.98 min in n-propanol and ethanol solvents 4.50 min. Analysis of the combinatory effects of polyols (sorbitol and glycerol) and the solvents on the stability revealed that sorbitol and glycerol had the most stabilizing effect on the free enzyme in hydrophilic (DMSO) and hydrophobic (n-propanol) solvents, respectively. However, the stabilizing effects of polyols in the immobilized enzyme were independent of the solvents' hydrophobicity (or log P) due to the hydrophilic properties of chitosan nanoparticles. Therefore, one can conclude that the physiochemical properties of nanoparticles (such as hydrophilicity) influence the stabilizing effects of polyols on immobilized enzyme.

Development of CS-TPP-dsRNA nanoparticles to enhance RNAi efficiency in the yellow fever mosquito, Aedes aegypti

Mosquito-borne diseases are a major threat to human health and are responsible for millions of deaths globally each year. Vector control is one of the most important approaches used in reducing the incidence of these diseases. However, increasing mosquito resistance to chemical insecticides presents challenges to this approach. Therefore, new strategies are necessary to develop the next generation vector control methods. Because of the target specificity of dsRNA, RNAi-based control measures are an attractive alternative to current insecticides used to control disease vectors. In this study, Chitosan (CS) was cross-linked to sodium tripolyphosphate (TPP) to produce nano-sized polyelectrolyte complexes with dsRNA. CS-TPP-dsRNA nanoparticles were prepared by ionic gelation method. The encapsulation efficiency, protection of dsRNA from nucleases, cellular uptake, in vivo biodistribution, larval mortality and gene knockdown efficiency of CS-TPP-dsRNA nanoparticles were determined. The results showed that at a 5:1 weight ratio of CS-TPP to dsRNA, nanoparticles of less than 200 nm mean diameter and a positive surface charge were formed. Confocal microscopy revealed the distribution of the fed CS-TPP-dsRNA nanoparticles in midgut, fat body and epidermis of yellow fever mosquito, Aedes aegypti larvae. Bioassays showed significant mortality of larvae fed on CS-TPP-dsRNA nanoparticles. These assays also showed knockdown of a target gene in CS-TPP-dsRNA nanoparticle fed larvae. These data suggest that CS-TPP nanoparticles may be used for delivery of dsRNA to mosquito larvae.

Biodegradable cross-linked chitosan nanoparticles improve anti-Candida and anti-biofilm activity of TistH, a peptide identified in the venom gland of the Tityus stigmurus scorpion

Among several bioactive peptides identified from the venom glands of the Tityus stigmurus scorpion, one peptide with hypotensive action (TistH, Tityus stigmurus Hypotensin) showed multifunctional and biotechnological applications. The maximum efficacy of this class of compounds can be achieved by immobilizing it in specific and suitable biomaterials or suitable carriers. In this study, distinct entrapment methods of TistH in chitosan nanoparticles was tested using its incorporation (CN-TistH-Inc) or adsorption (CN-TistH-Ads) methods by ionotropic gelification. Physico-chemical properties as well as biocompatibility and antifungal efficacy were assessed for different samples. Atomic force microscopy and field emission gun scanning electronic microscopy images associated with particle size measurements demonstrated that the two methods induced cationic spherical, small (< 160 nm), and narrow-sized (PdI about 0.3) nanoparticles, even after peptide loading greater than 96.5%, which was confirmed using Fourier transform infrared spectroscopy. The colloidal suspensions showed to be stable for 8 weeks and were able to induce the desired slow in vitro peptide release. Cytotoxicity assays performed in normal cells originated from murine macrophages (RAW 264.7) and kidneys of African green monkeys (Vero E6) suggested biocompatibility of samples. The CN-TistH-Inc and CN-TistH-Ads showed a minimal inhibitory concentration of 89.2 μg.mL^-1 against Candida albicans, 11.1 μg.mL^-1 for C. parapsilosis and C. tropicalis, confirmed by minimum fungicidal concentrations assay. Moreover, the TistH-loaded cross-linked chitosan nanoparticles significantly reduced the biofilm formation of clinical yeast sepsis of C. tropicalis and C. krusei, as well as clinical yeasts of vulvovaginal candidiasis of C. albicans. In this approach, biodegradable nanocarriers prepared using simple and reproducible methods demonstrated the ability to deliver the TistH peptide from T. stigmurus and improve its antifungal efficacy.

Efficient therapeutic effect of Nigella sativa aqueous extract and chitosan nanoparticles against experimentally induced Acanthamoeba keratitis

Acanthamoeba keratitis (AK) is a devastating, painful corneal infection, which may lead to loss of vision. The development of resistance and failure of the currently used drugs represent a therapeutic predicament. Thus, novel therapies with lethal effects on resistant Acanthamoeba are necessary to combat AK. In the present study, the curative effect of Nigella sativa aqueous extract (N. sativa) and chitosan nanoparticles (nCs) and both agents combined were assessed in experimentally induced AK. All inoculated corneas developed varying grades of AK. The study medications were applied on the 5th day postinoculation and were evaluated by clinical examination of the cornea and cultivation of corneal scraps. On the 10th day posttreatment, a 100% cure of AK was obtained with nCs (100 μg/ml) in grades 1 and 2 of corneal opacity as well as with N. sativa 60 mg/ml-nCs 100 μg/ml in grades 1, 2, and 3 of corneal opacity, highlighting a possible synergistic effect. On the 15th day posttreatment, a 100% cure was reached with N. sativa aqueous extract (60 mg/ml). Moreover, on the 20th day posttreatment, N. sativa (30 mg/ml) provided a cure rate of 87.5%, while nCs (50 μg/ml) as well as N. sativa 30 mg/ml-nCs 50 μg/ml yielded a cure rate of 75%; the lowest percentage of cure (25%) was obtained with chlorhexidine (0.02%), showing a non-significant difference compared to the parasite control. The clinical outcomes were in agreement with the results of corneal scrap cultivation. The results of the present study demonstrate the effectiveness of N. sativa aqueous extract and nCs (singly or combined) when used against AK, and these agents show potential for the development of new, effective, and safe therapeutic alternatives.

Pectin/Chitosan/Tripolyphosphate Nanoparticles: Efficient Carriers for Reducing Soil Sorption, Cytotoxicity, and Mutagenicity of Paraquat and Enhancing Its Herbicide Activity

As a potent herbicide capable of contaminating water and soil environments, paraquat, which is still widely used worldwide, is toxic to mammals, algae, aquatic animals, etc. Paraquat was loaded on novel nanoparticles composed of pectin, chitosan, and sodium tripolyphosphate (PEC/CS/TPP). The size, polydispersity index, and ζ potential of nanoparticles were characterized. Further assessments were carried out by SEM, AFM, FT-IR, and DSC. The encapsulation was highly efficient, and there was a delayed release pattern of paraquat. The encapsulated herbicide was less toxic to alveolar and mouth cell lines. Moreover, the mutagenicity of the formulation was significantly lower than those of pure or commercial forms of paraquat in a Salmonella typhimurium strain model. The soil sorption of paraquat and the deep soil penetration of the nanoparticle-associated herbicide were also decreased. The herbicidal activity of paraquat for maize or mustard was not only preserved but also enhanced after encapsulation. It was concluded that paraquat encapsulation with PEC/CS/TPP nanoparticles is highly efficient and the formulation has significant herbicide activity. It is less toxic to human environment and cells, as was evidenced by less soil sorption, cytotoxicity, and mutagenicity. Hence, paraquat-loaded PEC/CS/TPP nanoparticles have potential advantages for future use in agriculture.

Formulation and characterization of glibenclamide and quercetin-loaded chitosan nanogels targeting skin permeation

Aim: Our aim was to develop and characterize a nanogel formulation containing both glibenclamide and quercetin and to explore the permeation profile of this combination. Methods: Drug-loaded nanogel was prepared by ionic gelation. In addition, optimum encapsulation efficiencies of glibenclamide and quercetin were also obtained. The average nanoparticle size at optimum conditions was determined by Zetasizer. Results: The particle size of the nanogel was found to be 370.4 ± 4.78 nm with a polydispersity index of 0.528 ± 0.04, while the λ potential was positive in a range of 17.6 to 24.8 mV. The percentage cumulative drug release also showed favorable findings. Conclusion: The chitosan nanogel could be a potential alternative for delivering glibenclamide and quercetin through skin.

Chitosan Nanoparticles Rescue Rotenone-Mediated Cell Death

The aim of the present investigation was to study the anti-oxidant effect of chitosan nanoparticles on a human SH-SY5Y neuroblastoma cell line using a rotenone model to generate reactive oxygen species. Chitosan nanoparticles were synthesized using an ionotropic gelation method. The obtained nanoparticles were characterized using various analytical techniques such as Dynamic Light Scattering, Scanning Electron Microscopy, Transmission Electron Microscopy, Fourier Transmission Infrared spectroscopy and Atomic Force Microscopy. Incubation of SH-SY5Y cells with 50 µM rotenone resulted in 35-50% cell death within 24 h of incubation time. Annexin V/Propidium iodide dual staining verified that the majority of neuronal cell death occurred via the apoptotic pathway. The incubation of cells with chitosan nanoparticles reduced rotenone-initiated cytotoxicity and apoptotic cell death. Given that rotenone insult to cells causes oxidative stress, our results suggest that Chitosan nanoparticles have antioxidant and anti-apoptotic properties. Chitosan can not only serve as a novel therapeutic drug in the near future but also as a carrier for combo-therapy.

Carbamide peroxide nanoparticles for dental whitening application: Characterization, stability and in vivo/in situ evaluation

Carbamide peroxide is the popular home dental whitening agent. However, it has critical stability. Nanoparticles have been applied to develop products with advantages properties as better efficacy and stability increase. The aim of this study was the characterization of carbamide peroxide polymeric nanoparticles, their bleaching efficacy, effects on pulp damage and stability evaluation. Particle size demonstrated a spherical morphology and bimodal distribution (11 and 398 nm). Nanoparticles presented high entrapment efficiency (98.94%) and the zeta potential value was slightly positive (+10.26 mV). Regardless of the zeta potential, the steric effect may contribute to carbamide peroxide nanoparticle stabilization. The stability studies conducted at room temperature suggested that carbamide peroxide nanoparticles could maintain all the parameters evaluated (size, polydispersity index, zeta potential, entrapment efficiency, pH and content) for at least 90 days. Instability index was determined by dispersion analyzer (LUMiSizer ^®), was 0.018, and the light transmission profile did not present sedimentation. Carbamide peroxide nanoparticles were able to prevent thermal degradation and photostability. Clinical efficacy of the whitening gels was obtained by color change in the spectrophotometer and the results showed that all the evaluated gels containing the nanoparticles (0, 1, 2 and 5% of real carbamide peroxide) were effective at bleaching after 2 h of home whitening treatment (during 30 days). After the treatment, the extracted teeth showed no in situ pulp damage by histological evaluation. The nanotechnology strategy of converting carbamide peroxide into polymeric nanoparticles revealed a new product with improved stability, a good approach for carbamide peroxide delivery.

Towards a clinical application of freeze-dried squalene-based nanomedicines

Squalene-adenosine (SQAd) nanoparticles (NPs) were found to display promising pharmacological activity similar to many other nanomedicines, but their long-term stability was still limited, and their preparation required specific know-how and material. These drawbacks represented important restrictions for their potential use in the clinic. Freeze-drying nanoparticles is commonly presented as a solution to allow colloidal stability, but this process needs to be adapted to each nanoformulation. Hence, we aimed at developing a specific protocol for freeze-drying SQAd NPs while preserving their structural features. NPs were lyophilised, resuspended and analysed by dynamic light scattering, atomic force microscopy and small-angle scattering. Among four different cryoprotectants, trehalose was found to be the most efficient in preserving NPs physico-chemical characteristics. Interestingly, we identified residual ethanol in NP suspensions as a key parameter which could severely affect the freeze-drying outcome, leading to NPs aggregation. Long-term stability was also assessed. No significant change in size distribution or zeta potential could be detected after three-month storage at 4 °C. Finally, freeze-dried NPs innocuity was checked in vitro on cultured hepatocytes and in vivo on mice. In conclusion, optimisation of freeze-drying conditions resulted in safe lyophilised SQAd NPs that can be easily stored, shipped and simply reconstituted into an injectable form.

Chitosan Plus Compound 48/80: Formulation and Preliminary Evaluation as a Hepatitis B Vaccine Adjuvant

Current vaccine research is mostly based on subunit antigens. Despite the better toxicity profile of these antigens they are often poorly immunogenic, so adjuvant association has been explored as a strategy to obtain a potent vaccine formulation. Recently, mast cell activators were recognized as a new class of vaccine adjuvants capable of potentiating mucosal and systemic immune responses. In this study, a co-adjuvanted delivery system was developed and characterized, combining the mast cell activator C48/80 with chitosan nanoparticles (Chi-C48/80 NPs), and the results were compared with plain chitosan nanoparticles. The adsorption of model antigens onto the NP surface as well as the biocompatibility of the system was not affected by the incorporation of C48/80 in the formulation. The stability of the nanoparticles was demonstrated by studying the variation of size and zeta potential at different times, and the ability to be internalized by antigen presenting cells was confirmed by confocal microscopy. Vaccination studies with hepatitis B surface antigen loaded Chi-C48/80 NPs validated the adjuvanticity of the delivery system, demonstrating for the first time a successful association between a mast cell activator and chitosan nanoparticles as a vaccine adjuvant for hepatitis B virus, applied to a nasal vaccination strategy.