Efficacy of carbonaceous nanocomposites for sorbing ionizable antibiotic sulfamethazine from aqueous solution

Challenges and recent advances in biochar as low-cost biosorbent: From batch assays to continuous-flow systems

Over the past few years, the increasing amount of pollutants and their diversity demand to develop versatile low-cost adsorption systems. The use of biomass feedstock such as agricultural residues, wood chips, manure or municipal solid wastes as source to produce low-cost biosorbent, and the new advances in their synthesis have encouraged remarkable efforts towards the development of biochar "on demand" in which their characteristics can be improved. This new trend opens the potential of biochar application in the removal of pollutants from wastewater, however, its use in environmental management requires the development of full-scale biosorption in engineered systems. Thus, this paper provides a brief review of recent progress in the research and practical application of biochar with a special emphasis on its potential to reduce the pollutants present in wastewater or to render them harmless. Furthermore, research gaps and uncertainties detected in their scale-up in continuous-flow systems are highlighted.

Molecular docking simulation on the interactions of laccase from Trametes versicolor with nonylphenol and octylphenol isomers

The biodegradation of nonylphenol (NP) and octylphenol (OP) isomers by laccase has attracted increasing concerns. However, the interaction mechanism between these isomers and laccase remains unclear, especially for fungal laccase. In this work, molecular docking was employed to study this issue. The results indicated that the structural characteristic of alkyl chain (position and branching degree) affected the interactions between Trametes versicolor (T. versicolor) laccase and isomers. The binding affinity between them was closely related to the position and branching degree of alkyl chain in isomers. The binding affinities between linear isomers and T. versicolor laccase were para-position < meta-position < ortho-position. For selected branched 4-NP, the isomers with bulky α-substituent in alkyl chain had higher binding affinities. In addition, hydrophobic contacts between T. versicolor laccase and NP or OP isomers were necessary, while H-bonds were optional. The isomers with similar structure may have more common residues involved in hydrophobic contacts. The H-bonds of selected NPs and OPs were all connected with phenolic hydroxyl. These findings provide an insight into detailed interaction mechanism between T. versicolor laccase and isomers of NP and OP. It is helpful to broaden the knowledge of degradation technology of NPs and OPs and provide theoretical basis on biological remediation of these contaminants.

Adsorption Behaviors of Organic Micropollutants on Zirconium Metal-Organic Framework UiO-66: Analysis of Surface Interactions

Herein, we studied the adsorption behaviors of organic micropollutants, such as anticonvulsant carbamazepine (CBZ) and antibiotic tetracycline hydrochloride (TC), on zirconium metal-organic framework UiO-66 in water. The maximum adsorption capacities of CBZ and TC on the UiO-66 were 37.2 and 23.1 mg·g^-1 at 25 °C, respectively. The adsorption isotherms and kinetics of CBZ and TC were well described by using the Langmuir model and pseudo-second-order model, respectively, and the adsorptions on UiO-66 are endothermic reactions. The adsorption capacities of CBZ and TC on UiO-66 were decreased with the increase of solution pH. The presence of humic acid could improve the adsorption of CBZ and TC on UiO-66, but K⁺ ion inhibited their adsorption obviously. In addition, Ca²⁺ and Al³⁺ ions also suppressed the adsorption of TC on UiO-66. The competitive adsorption suggested that the adsorption sites for CBZ on UiO-66 were different from those for TC. The surface interactions between UiO-66 and the two micropollutants were demonstrated by powder X-ray diffraction, Fourier transform infrared (FT-IR) spectra, scanning electron microscopy, nitrogen adsorption/desorption isotherms, and X-ray photoelectron (XPS) spectra. The characterizations showed that the adsorption of CBZ on UiO-66 is mainly a physisorption, and the hydrophobic effect played a crucial role during the adsorption of CBZ; meanwhile weak π-π electron donor-acceptor interaction and electrostatic attraction also existed. However, the adsorption of TC on UiO-66 is mainly a chemisorption; in addition to the strong electrostatic attraction and π-π electron donor-acceptor interaction forces, the nitrogenous groups of TC played an important role, which can replace the carboxylic groups coordinated with Zr-O clusters. The obtained results will aid us to comprehend the surface interaction between organic micropollutants and UiO-66 and expand the application of UiO-66 as sorbent for removal of pollutants from water.

Synergistic action of rhizospheric fungi with Megathyrsus maximus root speeds up hydrocarbon degradation kinetics in oil polluted soil

This study was aimed at combining the potentials of plant and some rhizospheric fungal strains in remediation of crude-oil polluted soil. Four new rhizospheric fungi were identified from an aged crude-oil polluted site and used with Megathyrsus maximus (guinea grass) for a 90 day synergistic remediation experiment. Cultures of these strains were first mixed with spent mushroom compost (SMC), the mixture was then applied to a sterilized crude oil polluted soil at concentrations of 10%, 20%, 30% and 40% potted in three replicates. Soil with plant alone (0%₁) and soil with fungi-SMC alone (0%₂) served as controls. The soil's initial and final pH, nutrient, 16 EPA PAHs and heavy metal contents were determined, degradation rate, half-life and percentage loss of the total polyaromatic hydrocarbon (TPAH) were also calculated. Finally, the remediated soils were further screened for seed germination supporting index. The fungal strains were identified and registered at NCBI as Aspergillus niger asemoA (KY473958.1), Talaromyces purpurogenus asemoF (KY488463.1), Trichoderma harzianum asemoJ (KY488466.1) and Aspergillus flavus asemoM (KY488467.1). We observed for the first time that the synergistic mechanism improved the soil nutrient, reduced the heavy metal concentration and sped up hydrocarbon degradation rate. Using the initial and final concentrations of the TPAH, we recorded highest biodegradation rates (K₁) and half-life (t_1/2) in 30 and 40% treatments over controls, these treatments also had highest seed germination supporting index. This work suggests that the set-up synergistic remediation could be used to remediate crude oil polluted soil and this could be used in large scale.

Sorptive removal of ionizable antibiotic sulfamethazine from aqueous solution by graphene oxide-coated biochar nanocomposites: Influencing factors and mechanism

Significant concerns have been raised over antibiotics pollution in aquatic environments in recent years. In this study, sorption of sulfamethazine (SMT) by novel graphene oxide-coated biochar nanocomposites (GO-BC) based on graphene oxide (GO) with bamboo sawdust biochar (BC) was investigated. In comparison with the original BC, the sorption capacity of GO-BC for SMT increased by 1.14 times. Sorption of SMT onto GO-BC was proved to be dominantly by chemisorption, and Freundlich isotherm described the sorption adequately. It was found that variation of pH and ionic strength obviously affected the sorption of SMT, and GO-BC had a good sorption effect on SMT at pH 3.0-6.0 and lower ionic strength. Obvious enhancement (by 30%) in sorption of SMT on GO-BC was observed, which might be attributed to the increase of functional groups on the surface of GO-BC. Moreover, the main sorption mechanism for SMT was π-π electron-donor-acceptor interaction, while auxiliary sorption mechanisms were inferred as pore-filling, cation exchange, hydrogen bonding interaction and electrostatic interaction. The results indicated that GO-BC sorption was an efficient way for the removal of SMT.

Comparison of landfarming amendments to improve bioremediation of petroleum hydrocarbons in Niger Delta soils

Large scale landfarming experiments, using an extensive range of treatments, were conducted in the Niger-Delta, Nigeria to study the degradation of oil in contaminated soils. In this work the effect of nutrient addition, biosurfactant, Eisenia fetida (earthworm) enzyme extract, bulking and sorption agents and soil neutralization were tested. It was found that these treatments were successful in removing up to 53% of the total petroleum hydrocarbon in the soil within 16 weeks. A comparison between treatments demonstrated that most were no more effective than agricultural fertilizer addition alone. One strategy that did show better performance was a combination of nutrients, biochar and biosurfactant, which was found to remove 23% more Total Petroleum Hydrocarbons (TPH) than fertilizer alone. However, when performance normalized costs were considered, this treatment became less attractive as a remedial option. Based on this same analysis it was concluded that fertilizer only was the most cost effective treatment. As a consequence, it is recommended that fertilizer is used to enhance the landfarming of hydrocarbon contaminated soils in the Niger Delta. The attenuation rates of both bulk TPH and Total Petroleum Hydrocarbon Criteria Working Group (TPHCWG) fractions are also provided. These values represent one of the first large scale and scientifically tested datasets for treatment of contaminated soil in the Niger Delta region. An inverse correlation between attenuation rates and hydrocarbon molecular weight was observed with heavy fractions showing much slower degradation rates than lighter fractions. Despite this difference, the bioremediation process resulted in significant removal of all TPH compounds independent of carbon number.

Organic matters removal from landfill leachate by immobilized Phanerochaete chrysosporium loaded with graphitic carbon nitride under visible light irradiation

This study investigated the technical applicability of a combination of Phanerochaete chrysosporium (P. chrysosporium) with photocatalyst graphitic carbon nitride (g-C₃N₄) for organic matters removal from landfill leachate under visible light irradiation. Photocatalyst g-C₃N₄ was well immobilized on the hyphae surface of P. chrysosporium by calcium alginate. The typical absorption edge in visible light region for g-C₃N₄ was at about 460 nm, and the optical absorption bandgap of g-C₃N₄ was estimated to be 2.70 eV, demonstrating the great photoresponsive ability of g-C₃N₄. An optimized g-C₃N₄ content of 0.10 g in immobilized P. chrysosporium and an optimized immobilized P. chrysosporium dosage of 1.0 g were suitable for organic matters removal. The removal efficiency of total organic carbon (TOC) reached 74.99% in 72 h with the initial TOC concentration of 100 mg L^-1. In addition, the gas chromatography coupled with mass spectrometry (GC-MS) measurements showed that immobilized P. chrysosporium presented an outstanding removal performance for almost all organic compounds in landfill leachate, especially for the volatile fatty acids and long-chain hydrocarbons. The overall results indicate that the combination P. chrysosporium with photocatalyst g-C₃N₄ for organic matters removal from landfill leachate may provide a more comprehensive potential for the landfill leachate treatment.

Assessment on cadmium and lead in soil based on a rhizosphere microbial community

The soil ecosystem is easily polluted by heavy metals. Cadmium (Cd) and lead (Pb), as the main pollutants of heavy metals, cause much harm to the soil ecosystem. However, the impact of the two chemicals on rhizosphere microorganisms remains almost unknown. The change of catalase (CAT) activity was consistent with the microbial biomass. 16S rRNA gene sequencing was performed on soil samples to study the toxic effect of heavy metals. On performing sequence analysis at the phylum and family taxonomic levels, 32 identified phyla and 303 families were observed. The dominant phylum was Proteobacteria followed by Bacteroidetes, Acidobacteria, and Actinobacteria. The relative abundance of the dominant phyla was obviously changed under the stress of Cd and Pb, suggesting that the heavy metal input had affected the microbial community structure. At the Order and Family levels, there was different variation of richness and diversity in Cd and Pb group as compared to those in the control group. Furthermore, abundance and similarity analysis showed the differences between Cd and Pb, indicating different toxicology effect on rhizosphere microbial communities because of the unique properties. This study provided a novel insight into the composition of microbial communities of rhizosphere, which could be used to evaluate the soil environment.

Facile synthesis of Cu(II) impregnated biochar with enhanced adsorption activity for the removal of doxycycline hydrochloride from water

In this study, the effect factors and mechanisms of doxycycline hydrochloride (DOX) adsorption on copper nitrate modified biochar (Cu-BC) was investigated. Cu-BC absorbent was synthesized through calcination of peanut shells biomass at 450°C and then impregnation with copper nitrate. The Cu-BC has exhibited excellent sorption efficiency about 93.22% of doxycycline hydrochloride from aqueous solution, which was double higher than that of the unmodified biochar. The experimental results suggest that the adsorption efficiency of DOX on the Cu-BC is dominated by the strong complexation, electrostatic interactions between DOX molecules and the Cu-BC samples. Comprehensively considering the cost, efficiency and the application to realistic water, the Cu-BC hold the significant potential for enhancing the effectiveness to remove DOX from water.

Removal of antibiotics from piggery wastewater by biological aerated filter system: Treatment efficiency and biodegradation kinetics

This study aimed to investigate the removal efficiency and mechanism for antibiotics in swine wastewater by a biological aerated filter system (BAF system) in combination with laboratory aerobic and anaerobic incubation experiments. Nine antibiotics including sulfamonomethoxine, sulfachloropyridazine, sulfamethazine, trimethoprim, norfloxacin, ofloxacin, lincomycin, leucomycin and oxytetracycline were detected in the wastewater with concentrations up to 192,000ng/L. The results from this pilot study showed efficient removals (>82%) of the conventional wastewater pollutants (BOD₅, COD, TN and NH₃-N) and the detected nine antibiotics by the BAF system. Laboratory simulation experiment showed first-order dissipation kinetics for the nine antibiotics in the wastewater under aerobic and anaerobic conditions. The biodegradation kinetic parameters successfully predicted the fate of the nine antibiotics in the BAF system. This suggests that biodegradation was the dominant process for antibiotic removal in the BAF system.

Evaluation methods for assessing effectiveness of in situ remediation of soil and sediment contaminated with organic pollutants and heavy metals

Soil and sediment contamination has become a critical issue worldwide due to its great harm to the ecological environment and public health. In recent years, many remediation technologies including physical, chemical, biological, and combined methods have been proposed and adopted for the purpose of solving the problems of soil and sediment contamination. However, current research on evaluation methods for assessing these remediation technologies is scattered and lacks valid and integrated evaluation methods for assessing the remediation effectiveness. This paper provides a comprehensive review with an environmental perspective on the evaluation methods for assessing the effectiveness of in situ remediation of soil and sediment contaminated with organic pollutants and heavy metals. The review systematically summarizes recent exploration and attempts of the remediation effectiveness assessment based on the content of pollutants, soil and sediment characteristics, and ecological risks. Moreover, limitations and future research needs of the practical assessment are discussed. These limitations are not conducive to the implementation of the abatement and control programs for soil and sediment contamination. Therefore, more attention should be paid to the evaluation methods for assessing the remediation effectiveness while developing new in situ remediation technologies in future research.

Role of biochar on composting of organic wastes and remediation of contaminated soils-a review

Biochar is produced by pyrolysis of biomass residues under limited oxygen conditions. In recent years, biochar as an amendment has received increasing attention on composting and soil remediation, due to its unique properties such as chemical recalcitrance, high porosity and sorption capacity, and large surface area. This paper provides an overview on the impact of biochar on the chemical characteristics (greenhouse gas emissions, nitrogen loss, decomposition and humification of organic matter) and microbial community structure during composting of organic wastes. This review also discusses the use of biochar for remediation of soils contaminated with organic pollutants and heavy metals as well as related mechanisms. Besides its aging, the effects of biochar on the environment fate and efficacy of pesticides deserve special attention. Moreover, the combined application of biochar and compost affects synergistically on soil remediation and plant growth. Future research needs are identified to ensure a wide application of biochar in composting and soil remediation. Graphical abstract ᅟ.

Application Method and Biochar Type Affect Petroleum Hydrocarbon Degradation in Northern Landfarms

To integrate biochar as a practical and successful remedial amendment at northern landfarms, components of its formulation and application must be optimized for site-specific environmental conditions. Different biochar amendments were applied to petroleum hydrocarbon (PHC)-contaminated soil at two northern field sites (Iqaluit and Whitehorse) and in a laboratory study at -5°C to determine the effects of application method (injection or incorporation) and biochar type (wood, fishmeal, bonemeal, and/or compost) on PHC degradation and associated soil properties. Incorporation decreased F2 (equivalent C-C) and F3 (equivalent C-C) PHC concentrations in soil after 31 d, whereas injection did not decrease PHC concentrations until Day 334. Bonemeal-derived biochar selectively stimulated F3-PHC degradation in frozen soil over 90 d under controlled laboratory conditions. In the field, there was little difference in PHC degradation between biochar types and the fertilizer control. Incorporation also increased NO availability, and in field trials, all biochars increased NO availability relative to the fertilizer control, whereas the effects of biochars on NH and PO were variable. Aromatic functional gene abundance was enhanced when treatments were incorporated, compared with when injected. In field trials, 6% Zakus wood plus fertilizer inhibited aliphatic and aromatic gene abundance. Liquid water content increased in incorporated treatments, specifically those amended with fishmeal biochar. Incorporation was the most successful application method for these northern soils, and although biochar amendments are not clearly effective in reducing PHC concentrations, there is evidence to suggest it can beneficially influence soil properties and PHC degradation under specific environmental conditions.

Characterization of lignocellulosic compositions' degradation during chicken manure composting with added biochar by phospholipid fatty acid (PLFA) and correlation analysis

Biorefractory high polymer lignocellulosic compositions may limit rapid composting and stable decomposition. Because their degradation during composting is not well understood, the correlation with microbial community profiles was assessed to reveal degradation mechanism of lignocellulosic compositions. Testing of chicken manure aerobic composting with added biochar was performed using phospholipid fatty acid (PLFA) and correlation analysis. Results demonstrated a good composting effect with good dynamic correlation between microbial characteristic (PLFA) and lignocellulosic compositions' degradation ratio. The prediction model for hemicellulose degradation ratio (R²=0.97, SEP=3.24) and the prediction model for cellulose degradation ratio (R³=0.94, SEP=3.09), built using PLFA 16:0-18:2ω6c and PLFA 18:2ω6c-18:3ω3 as the arguments had good predictive ability. Based on microbial analysis and quantitative characterization of the degradation ratio, the prediction models provided methodological support for delineating the mechanism of lignocellulosic compositions' degradation during chicken manure aerobic composting with added biochar.

Effect of the micron-sized silica particles (MSSP) on biogas conversion of sewage sludge

Micron-sized silica particles (MSSP), ranging from 3 μm to 50 μm, have been widely found in the sewage sludge. The inhibition of MSSP to biogas conversion of both excess sludge (ES) and model sludge (MS) are explored in this study. It is observed that with the effect of MSSP, the net cumulative methane production (NCMP) of ES and MS were decreased by 23.5% and 22.3%, respectively, and the apparent activation energy (AAE) of organic solubilisation of ES and MS were increased by 38.7% and 215%, respectively, which implies a crucial role for MSSP in anaerobic sludge digestion. Analysis of physicochemical properties of sludges before and after interaction with MSSP reveals that MSSP can bond with organic matter from sludge on the surface sites to form a larger bioinorganic-floc. Further analysis indicates that MSSP can increase the AAE of sludge organic solubilisation by reducing the surface site density, thus resulting in poor NCMP. Through characterizing the bioinorganic-floc, it is found that the protein in sludge is the main component that bonds with MSSP. Further research show that the interactions between protein and MSSP are mainly enthalpy-driven with exothermic (the enthalpy was about -10.93 ± 0.10 kJ/mol, at 25 °C), indicating that protein is more stable after non-covalent bonding. These findings can provide a new understanding of the characteristics of sludge and important references for the improvement of anaerobic sludge digestion.

Kinetics of soil dehydrogenase in response to exogenous Cd toxicity

Soil dehydrogenase plays a role in the biological oxidation of soil organic matter and can be considered a good measure of the change of microbial oxidative activity under environmental pollutions. However, the kinetic characteristic of soil dehydrogenase under heavy metal stresses has not been investigated thoroughly. In this study, we characterized the kinetic characteristic of soil dehydrogenase in 14 soil types, and investigated how kinetic parameters changed under spiked with different concentrations of cadmium (Cd). The results showed that the K_m and V_max values of soil dehydrogenase was among 1.4-7.3mM and 15.9-235.2μMh^-1 in uncontaminated soils, respectively. In latosolic red soil and brown soil, the inhibitory kinetic mechanism of Cd to soil dehydrogenase was anticompetitive inhibition with inhibition constants (K_i) of 12 and 4.7mM, respectively; in other soils belonged to linear mixed inhibition, the values of K_i were between 0.7-4.2mM. Soil total organic carbon and K_i were the major factors affecting the toxicity of Cd to dehydrogenase activity. In addition, the velocity constant (k) was more sensitive to Cd contamination compared to V_max and K_m, which was established as an early indicator of gross changes in soil microbial oxidative activity caused by Cd contamination.

The effects of rice straw biochar on indigenous microbial community and enzymes activity in heavy metal-contaminated sediment

Owning to the potential in carbon sequestration and other environmental benefits, biochar has been widely used for in-situ environmental remediation. Understanding the biological effects of biochar is essential. The goal of this study was to explore the response of indigenous microbes under the stress of different concentrations of biochar. The results showed that biochar could significantly change physicochemical properties, enzymes activity and microbial community composition depending on biochar concentration and incubation time. When the concentration of biochar was 50 mg kg^-1, the activities of invertase and alkaline phosphatase were obviously inhibited. Meanwhile, bacterial 16S rRNA and fungal 18S rRNA coding gene copies were decreased by 74% and 25%, respectively after 90 days of incubation. Additionally, the bacterial community succession occurred and the relative intensity of dominant species decreased when treated with high concentration of biochar. However, the activity of urease and alkaline phosphatase, as well as bacterial and fungal abundance, were increased when sediment was treated with 10 mg kg^-1 biochar. Relationships among physicochemical properties, heavy metals and microbes were analyzed by correlation analysis and redundancy analysis (RDA). Correlations between invertase activity and pH value in the experiment were significantly negative. Redundancy analysis showed physicochemical properties and heavy metals explained 92% of the variation in the bacterial DGGE profiles and organic matter content explained the majority (45%) of the variation. This study indicated that indigenous microbes could be affected by biochar either directly or indirectly via changing the physicochemical properties and heavy metals of sediment.

Tween 80 surfactant-enhanced bioremediation: toward a solution to the soil contamination by hydrophobic organic compounds

The occurrence of hydrophobic organic compounds (HOCs) in the soil has become a highly significant environmental issue. This problem has been exacerbated by the strong sorption of HOCs to the soils, which makes them unavailable for most remediation processes. More and more works show that surfactant-enhanced biological technologies offer a great potential to clear up HOCs-contaminated soils. This article is a critical review of HOCs removal from soils using Tween 80 (one of the mostly used nonionic surfactants) aided biological remediation technologies. The review begins with a discussion of the fundamentals of Tween 80-enhanced desorption of HOCs from contaminated soils, with special emphasis on the biotoxicity of Tween 80. Successful results obtained by Tween 80-enhanced microbial degradation and phytoremediation are documented and discussed in section 3 and section 4, respectively. Results show Tween 80-enhanced biotechnologies are promising for treating HOCs-contaminated soils. However, considering the fact that most of these scientific studies have only been conducted at the laboratory-scale, many improvements are required before these technologies can be scaled up to the full-scale level. Moreover, further research on mechanisms related to the interaction of Tween 80 with degrading microorganisms and the plants is in high demand.

Effect of multi-walled carbon nanotubes on phytotoxicity of sediments contaminated by phenanthrene and cadmium

To implement effective control and abatement programs for contaminants accumulating in sediments, strategies are needed for evaluating the quality of amended sediments. In this study, phytotoxicity of the sediments contaminated by cadmium and phenanthrene was evaluated after in situ remediation with multi-walled carbon nanotubes (MWCNTs) as adsorbents. Adsorption experiments and measurement of aqueous concentrations of the contaminants in overlying water were used to investigate the remediation effectiveness from physical and chemical aspects. The results indicated that MWCNTs showed a much better adsorption performance towards phenanthrene and Cd(II) compared with the sediments. The in situ remediation with MWCNTs could distinctly decrease the aqueous concentrations of phenanthrene and Cd(II) released from the sediments, reducing environmental risk towards overlying water. Influences of MWCNTs dose, MWCNTs diameter, and contact time on phtotoxicity of the contaminated sediments were studied. No significant inhibition of the amended sediments on germination of the test species was observed in the experiments, while the root growth was more sensitive than biomass production to the changes of contaminant concentrations. The analysis of Pearson correlation coefficients between evaluation indicators and associated remediation parameters suggested that phytotoxicity of sediments might inaccurately indicate the changes of pollutant content, but it was significant in reflecting the ecotoxicity of sediments after remediation.

Land-use types and soil chemical properties influence soil microbial communities in the semiarid Loess Plateau region in China

Similar land-use types usually have similar soil properties, and, most likely, similar microbial communities. Here, we assessed whether land-use types or soil chemical properties are the primary drivers of soil microbial community composition, and how changes in one part of the ecosystem affect another. We applied Ion Torrent sequencing to the bacterial and fungal communities of five different land-use (vegetation) types in the Loess Plateau of China. We found that the overall trend of soil quality was natural forest > plantation > bare land. Dominant bacterial phyla consisted of Proteobacteria (42.35%), Actinobacteria (15.61%), Acidobacteria (13.32%), Bacteroidetes (8.43%), and Gemmatimonadetes (6.0%). The dominant fungi phyla were Ascomycota (40.39%), Basidiomycota (38.01%), and Zygomycota (16.86%). The results of Canonical Correspondence Analysis (CCA) and Redundancy Analysis (RDA) based on land-use types displayed groups according to the land-use types. Furthermore, the bacterial communities were mainly organized by soil organic carbon (SOC). The fungal communities were mainly related to available phosphorus (P). The results suggested that the changes of land use type generated changes in soil chemical properties, controlling the composition of microbial community in the semiarid Loess Plateau region. The microbial community could be an indicator for soil quality with respect to ecological restoration.

Simultaneous removal of atrazine and copper using polyacrylic acid-functionalized magnetic ordered mesoporous carbon from water: adsorption mechanism

Highly efficient simultaneous removal of atrazine and Cu(II) was accomplished using synthesized polyacrylic acid-functionalized magnetic ordered mesoporous carbon (P-MMC) as compared to magnetic ordered mesoporous carbon (MMC) and ordered mesoporous carbon (OMC). The mutual effects and interactive mechanism of their adsorption onto P-MMC were investigated systematically by binary, preloading and thermodynamic adsorption procedures. In both binary and preloading systems, the adsorption of atrazine was inhibited to some extent by the presence of Cu(II) because of selective recognition and direct competition, but the presence of atrazine had negligible effect on Cu(II) desorption. With the coexistence of humic acid (0–20 mg L⁻¹), both atrazine and Cu(II) sorption increased slightly in sole and binary systems. With the concentration of coexisting NaCl increasing from 0 to 100 mM, the adsorption capacity for Cu(II) slightly decreased, but as for atrazine adsorption, it decreased at first, and then increased slightly in sole and binary systems. P-MMC was applied to treat real environmental samples, and the sorption capacities for atrazine and Cu(II) in real samples were all more than 91.47% and 96.43% of those in lab ultrapure water, respectively. Finally, comprehensively considering the relatively good renewability and the superior behavior in the application to real water samples, P-MMC has potential in removal of atrazine, Cu(II) and possibly other persistent organic pollutants from wastewater.

Sequestration of HCHs and DDTs in sediments in Dongting Lake of China with multiwalled carbon nanotubes: implication for in situ sequestration

Organochlorine pesticides (OCPs) in sediments could be released into water, posing great threats to human health and organisms. In this study, the treatment effectiveness of in situ sequestration of hexachlorocyclohexanes (HCHs) and dichlorodiphenyltrichloroethane (DDTs) in sediments was explored using multiwalled carbon nanotubes (MWCNTs) as adsorbents. Physicochemical tests (aqueous equilibrium concentrations, semipermeable membrane device (SPMD) uptake, and quiescent flux to overlying water) were conducted to evaluate the sequestration effectiveness of MWCNTs. Compared to the control, the MWCNT-treated sediments showed great reductions of HCHs and DDTs in aqueous equilibrium concentrations, SPMD uptake, and quiescent flux to overlying water. And the effects of dose of MWCNTs, diameter of MWCNTs, and contact time between MWCNTs and sediments on sequestration effectiveness were studied. Increased dose, decreased MWCNT diameter, and prolonged contact time resulted in a better sequestration effectiveness. The results indicated that the addition of MWCNTs to sediment could reduce the content of HCHs and DDTs released from sediments, reducing bioavailability of HCHs and DDTs and minimizing risks to ecosystem and human. MWCNTs have potential applications as adsorbents for in situ treatment of OCP-contaminated sediments.

Cadmium-containing quantum dots: properties, applications, and toxicity

The marriage of biology with nanomaterials has significantly accelerated advancement of biological techniques, profoundly facilitating practical applications in biomedical fields. With unique optical properties (e.g., tunable broad excitation, narrow emission spectra, robust photostability, and high quantum yield), fluorescent quantum dots (QDs) have been reasonably functionalized with controllable interfaces and extensively used as a new class of optical probe in biological researches. In this review, we summarize the recent progress in synthesis and properties of QDs. Moreover, we provide an overview of the outstanding potential of QDs for biomedical research and innovative methods of drug delivery. Specifically, the applications of QDs as novel fluorescent nanomaterials for biomedical sensing and imaging have been detailedly highlighted and discussed. In addition, recent concerns on potential toxicity of QDs are also introduced, ranging from cell researches to animal models.

Bioremediation mechanisms of combined pollution of PAHs and heavy metals by bacteria and fungi: A mini review

In recent years, knowledge in regard to bioremediation of combined pollution of polycyclic aromatic hydrocarbons (PAHs) and heavy metals by bacteria and fungi has been widely developed. This paper reviews the species of bacteria and fungi which can tackle with various types of PAHs and heavy metals entering into environment simultaneously or successively. Microbial activity, pollutants bioavailability and environmental factors (e.g. pH, temperature, low molecular weight organic acids and humic acids) can all affect the bioremediation of PAHs and heavy metals. Moreover, this paper summarizes the remediation mechanisms of PAHs and heavy metals by microbes via elucidating the interaction mechanisms of heavy metals with heavy metals, PAHs/PAHs metabolites with PAHs and PAHs with heavy metals. Based on the above reviews, this paper also discusses the potential research needs for this field.

Synthesis and evaluation of a new class of stabilized nano-chlorapatite for Pb immobilization in sediment

During the past years, efforts have been made to deal with the Pb contaminated sediment in Xiawangang River in Hunan province, China, but it remains a serious problem since the smelting pollutants were accumulated. According to previous studies, phosphate showed an effective ability to transfer labile Pb to pyromorphite (Pb₅(PO₄)₃X, X=F, Cl, Br, OH) but its application was limited by its solubility and deliverability. Hence a new class of nano-chlorapatite was synthesized by using sodium dodecyl sulfate (SDS) as a stabilizer and characterized by TEM, FESEM, DLS, FTIR, and EDAX. Results demonstrated that the SDS stabilized nano-chlorapatite (SDS-nClAP) was in spherical or spheroidal shape with a hydrodynamic diameter of 40.4nm. Experimental data suggested that SDS-nClAP was effective in transforming labile Pb to stable fraction with a maximum increase of 38.3%, also the reduction of TCLP-leachable Pb from 0.30 to 0mg/L after 45-d treatment. The increase of available phosphorus in both SDS-nClAP and ClAP treated sediment samples verified dissolution-precipitation mechanism involved in Pb immobilization. Additionally, the increment of organic matter in 10:1 treated samples was approximately 5-fold than that in 2:1 treated samples, which revealed that the micro-organisms may play an important role in it.

Immobilization of Cd in river sediments by sodium alginate modified nanoscale zero-valent iron: Impact on enzyme activities and microbial community diversity

This paper investigated how sodium alginate (SA)-modified nanoscale zero-valent iron (NZVI), play a constructive role in the remediation of cadmium (Cd) contaminated river sediments. The changes of the fraction of Cd, enzyme activities (urease, catalase, dehydrogenase) and bacterial community structures with the treatment by SNZVI were observed. The sequential extraction experiments demonstrated that most mobile fractions of Cd were transformed into residues (the maximum residual percentage of Cd increases from 15.49% to 57.28% after 30 days of incubation at 0.1 wt% SA), with the decrease of bioavailability of Cd. Exclusive of dehydrogenase, the activities of the other two enzymes tested were enhanced with the increase of incubation time, which indicated that dehydrogenase might be inhibited by ferric ions formed from SNZVI whereas no obvious inhibition was found for other enzymes. Polymerase chain reaction denaturing gradient gel electrophoresis (PCR-DGGE) analyses were used for the detection of microbial community changes, and the results showed that SNZVI and NZVI could increase bacterial taxa and improve bacterial abundance. All the experimental findings of this study provide new insights into the potential consequences of SNZVI treatments on the metal Cd immobilization in contaminated river sediments.

Quantitative relationships between the adsorptivity of carbonaceous materials in soil for Pb(II) and soil organic matter content

Strong adsorptivity of manufactured carbonaceous materials (MCMs) mediates the behavior of heavy metals in soil. Laboratory-reported adsorptivity of MCMs often deviates from their actual abilities in soil, because soil organic matter (SOM) can change the adsorptive abilities of MCMs by coating dissolved organic matter (DOM) on the surface of the MCMs. It was considered that the influence of SOM on the adsorptivity of MCMs in soil follows a sequential pathway of SOM releasing DOM in soil solution and subsequent DOM binding onto MCMs, thereby altering MCM surface acidity and hence changing MCM adsorptivity for heavy metals. In this study, we first extracted DOM from ten topsoils collected over a broad region of China with a wide range of SOM. The DOM solutions were then used to load DOM onto four MCMs including activated carbon (AC), multiwalled carbon nanotube (MWCNT), and two biochars (BC400 and BC700), respectively, obtaining a total of 44 MCM-DOM complex samples with known amounts of bound DOM. These MCM-DOM complex samples were then determined for their surface acidities and adsorptive abilities for Pb(II). We found that there were significant correlations between DOM concentration and SOM content, between DOM binding onto MCMs and DOM concentration, between surface acidity of MCM-DOM complexes and DOM binding onto MCMs, as well as between Pb(II) adsorption on MCM-DOM complexes and surface acidity of MCM-DOM complexes. With understanding of these individual linear correlations, linear relationships between the Pb(II) adsorption and SOM content were established by combining individual correlations and by directly plotting the former against the latter. These relationships may be used to accurately predict the adsorptive abilities of MCMs for heavy metals in soils via simply determining SOM.

Advanced nitrogen removal from landfill leachate via Anammox system based on Sequencing Biofilm Batch Reactor (SBBR): Effective protection of biofilm

High levels of organics negatively affect Anammox for treating landfill leachate. To enhance the ability of Anammox to survive against adverse environments, a lab-scale two-stage Anammox system using a Sequencing Biofilm Batch Reactor was applied to treat mature landfill leachate under 35°C. Over 107days, with influent total nitrogen (TN) and chemical oxygen demand (COD) concentrations of 3000±100 and 3000±100mg/L, effluent TN was below 20mg/L. For extracellular polymeric substance (EPS) of Anammox, slime-EPS and loosely-bound-EPS of floccules were both higher than biofilm, while tight-bound-EPS of biofilm was significantly higher, contributing to biofilm formation. Quantitative microbial analysis showed that as influent COD increased, Anammox gene ratios of biofilm increased from 1.34% to 13.28%; the gene ratios of floccule first increased, then decreased to 3.88%. This indicated that Anammox and heterotrophic bacteria could coexist because of the biofilm, leading to stable nitrogen removal performance, even when organics were present.

The adsorption mechanisms of ClO4− onto highly graphited and hydrophobic porous carbonaceous materials from biomass

Biomass activated carbons were activated and pyrolyzed at 300–800 °C under nitrogen circumstance (named as CAC300–CAC800).

Influence of morphological and chemical features of biochar on hydrogen peroxide activation: implications on sulfamethazine degradation

This paper investigated how morphological and chemical features of biochars influenced hydroxyl radical generation and sulfamethazine degradation in the presence of hydrogen peroxide.