Nanoparticles - known and unknown health risks

Pure ultra-fine carbon particles do not exert pro-coagulation and inflammatory effects on microvascular endothelial cells

Pro-thrombotic and inflammatory changes play an important role in cardiovascular morbidity and mortality, resulting from short-term exposure to fine particulate air-pollution. Part of those effects has been attributed to the ultra-fine particles (UFPs) that pass through the lung and directly contact blood-exposed and circulating cells. Despite UFP-induced platelet activation, it is unclear whether the penetrated particles exert any direct effect on endothelial cells. While exposure levels are boosting as a result of world-wide increases in economic development and desertification, which create more air-polluted regions, as well as increase in demands for synthetic UFPs in medicine and various industries, further studies on the health effects of these particles are required. In this study, human pulmonary and cardiac microvascular endothelial cells (MECs) have been exposed to 0.1, 1, 10, and 100 μg/ml suspensions of either a natural (carbon black) or a synthetic (multi-walled carbon nano-tubes) type of UFPs, in vitro. As a result, no changes in the levels of coagulation factor VIII, Von Willebrand factor, Interleukin 8, and P-selectin measured in the cells' supernatant were observed prior to and 6, 12, and 24 h after exposure. In parallel, the spatio-temporal effect of UFPs on cardiac MECs was evaluated by Transmission Electron Microscopy. Despite phagocytic uptake of pure UFPs observed on cellular sections of the treated cells, Weibel-Palade bodies remained intact in shape and similar in number when compared with the untreated cells. Our work shows that carbon itself is a non-toxic carrier for endothelial cells.

Health hazards of nanoparticles: understanding the toxicity mechanism of nanosized ZnO in cosmetic products

In recent years, nanoparticles are being used extensively in personal healthcare products such as cosmetics, sunscreens, soaps, and shampoos. Particularly, metal oxide nanoparticles are gaining competence as key industrial constituents, progressing toward a remarkable rise in their applications. Zinc oxide and titanium oxide nanoparticles are the most commonly employed metal oxide nanoparticles in sunscreens, ointments, foot care, and over the counter topical products. Dermal exposure to these metal oxides predominantly occurs through explicit use of cosmetic products and airway exposure to nanoparticle dusts is primarily mediated via occupational exposure. There is a compelling need to understand the toxicity effects of nanoparticles which can easily enter the cells and induce oxidative stress. Consequently, these products have become a direct source of pollution in the environment and thereby greatly impact our ecosystem. A complete understanding of the toxicity mechanism of nano-ZnO is intended to resolve whether and to what extent such nanoparticles may pose a threat to the environment and to human beings. In this review article, we have discussed the characteristics of metal oxide nanoparticles and its applications in the cosmetic industry. We have also highlighted about their toxicity effects and their impact on human health.

Near-Infrared Manipulation of Membrane Ion Channels via Upconversion Optogenetics

Membrane ion channels are ultimately responsible for the propagation and integration of electrical signals in the nervous, muscular, and other systems. Their activation or malfunctioning plays a significant role in physiological and pathophysiological processes. Using optogenetics to dynamically and spatiotemporally control ion channels has recently attracted considerable attention. However, most of the established optogenetic tools (e.g., channelrhodopsins, ChRs) for optical manipulations, are mainly stimulated by UV or visible light, which raises the concerns of potential photodamage, limited tissue penetration, and high-invasive implantation of optical fiber devices. Near-infrared (NIR) upconversion nanoparticle (UCNP)-mediated optogenetic systems provide great opportunities for overcoming the problems encountered in the manipulation of ion channels in deep tissues. Hence, this review focuses on the recent advances in NIR regulation of membrane ion channels via upconversion optogenetics in biomedical research. The engineering and applications of upconversion optogenetic systems by the incorporation multiple emissive UCNPs into various light-gated ChRs/ligands are first elaborated, followed by a detailed discussion of the technical improvements for more precise and efficient control of membrane channels. Finally, the future perspectives for refining and advancing NIR-mediated upconversion optogenetics into in vivo even in clinical applications are proposed.

Toxicity and mechanisms of action of titanium dioxide nanoparticles in living organisms

Titanium dioxide nanoparticles (TiO₂ NPs) are one of the most widely used nanomaterials in the consumer products, agriculture, and energy sectors. Their large demand and widespread applications will inevitably cause damage to organisms and ecosystems. A better understanding of TiO₂ NP toxicity in living organisms may promote risk assessment and safe use practices of these nanomaterials. This review summarizes the toxic effects of TiO₂ NPs on multiple taxa of microorganisms, algae, plants, invertebrates, and vertebrates. The mechanism of TiO₂ NP toxicity to organisms can be outlined in three aspects: The Reactive Oxygen Species (ROS) produced by TiO₂ NPs following the induction of electron-hole pairs; cell wall damage and lipid peroxidation of the cell membrane caused by NP-cell attachment by electrostatic force owing to the large surface area of TiO₂ NPs; and TiO₂ NP attachment to intracellular organelles and biological macromolecules following damage to the cell membranes.

Effect of sulphur and vanadium spiked fuels on particle characteristics and engine performance of auxiliary diesel engines

Particle emission characteristics and engine performance were investigated from an auxiliary, heavy duty, six-cylinder, turbocharged and after-cooled diesel engine with a common rail injection system using spiked fuels with different combinations of sulphur (S) and vanadium (V) spiking. The effect of fuel S content on both particle number (PN) and mass (PM) was clearly observed in this study. Higher PN and PM were observed for fuels with higher S contents at all engine load conditions. This study also found a correlation between fuel S content and nucleation mode particle number concentration which have more harmful impact on human health than larger particles. The highest PN and PM were observed at partial load conditions. In addition, S in fuel resulted in higher viscosity of spiked fuels, which led to lower engine blow-by. Fuel V content was observed in this study, evidencing that it had no clear effect on engine performance and emissions. Increased engine load also resulted in higher engine blow-by. The lower peak of in-cylinder pressure observed at both pre-mixed and diffusion combustion phases with the spiked fuels may be associated with the lower energy content in the fuel blends compared to diesel fuel.

Role of Endocrine-Disrupting Engineered Nanomaterials in the Pathogenesis of Type 2 Diabetes Mellitus

Nanotechnology has enabled the development of innovative technologies and products for several industrial sectors. Their unique physicochemical and size-dependent properties make the engineered nanomaterials (ENMs) superior for devising solutions for various research and development sectors, which are otherwise unachievable by their bulk forms. However, the remarkable advantages mediated by ENMs and their applications have also raised concerns regarding their possible toxicological impacts on human health. The actual issue stems from the absence of systematic data on ENM exposure-mediated health hazards. In this direction, a comprehensive exploration on the health-related consequences, especially with respect to endocrine disruption-related metabolic disorders, is largely lacking. The reasons for the rapid increase in diabetes and obesity in the modern world remain largely unclear, and epidemiological studies indicate that the increased presence of endocrine disrupting chemicals (EDCs) in the environment may influence the incidence of metabolic diseases. Functional similarities, such as mimicking natural hormonal actions, have been observed between the endocrine-disrupting chemicals (EDCs) and ENMs, which supports the view that different types of NMs may be capable of altering the physiological activity of the endocrine system. Disruption of the endocrine system leads to hormonal imbalance, which may influence the development and pathogenesis of metabolic disorders, particularly type 2 diabetes mellitus (T2DM). Evidence from many in vitro, in vivo and epidemiological studies, suggests that ENMs generally exert deleterious effects on the molecular/hormonal pathways and the organ systems involved in the pathogenesis of T2DM. However, the available data from several such studies are not congruent, especially because of discrepancies in study design, and therefore need to be carefully examined before drawing meaningful inferences. In this review, we discuss the outcomes of ENM exposure in correlation with the development of T2DM. In particular, the review focuses on the following sub-topics: (1) an overview of the sources of human exposure to NMs, (2) systems involved in the uptake of ENMs into human body, (3) endocrine disrupting engineered nanomaterials (EDENMs) and mechanisms underlying the pathogenesis of T2DM, (4) evidence of the role of EDENMs in the pathogenesis of T2DM from in vitro, in vivo and epidemiological studies, and (5) conclusions and perspectives.

Characterization of fume particles generated during arc welding with various covered electrodes

Arc welding operations are considered to be risky procedures by generating hazardous welding fume for human health. This study focuses on the key characteristics, as well as dispersion models, of welding fumes within a work zone. Commercial and widely used types of electrodes with various types of covering (rutile, basic, acidic and rutile-cellulose) were used in a series of experiments on arc welding operations, under 100 and 150 amps of electric current. According to the results of this study, maximum levels of pollution with particles of PM₁₀ fraction occur in the workspace during arc welding operations. Disregarding the types of electrodes used, the 3D models of dispersion of the РМ₁₀ particles at the floor plane exhibit corrugated morphologies while also demonstrate high concentrations of the РМ₁₀ particles at distances 0–3 m and 4–5 m from the emission source. The morphology of these particles is represented by solid and hollow spheres, ‘nucleus-shell’ structures, perforated spheres, sharp-edged plates, agglomerates of the tree-like (coral) shape. At last the bifractional mechanism of fume particle formation for this type of electrodes is also shown and described. In this article results are reported, which demonstrate the hazards of the arc welding process for human health. The results of the characterization of WFs reported improve our understanding of risks that these operations pose to human health and may strengthen the need for their control and mitigation.

Inhaled nanomaterials and the respiratory microbiome: clinical, immunological and toxicological perspectives

Our development and usage of engineered nanomaterials has grown exponentially despite concerns about their unfavourable cardiorespiratory consequence, one that parallels ambient ultrafine particle exposure from vehicle emissions. Most research in the field has so far focused on airway inflammation in response to nanoparticle inhalation, however, little is known about nanoparticle-microbiome interaction in the human airway and the environment. Emerging evidence illustrates that the airway, even in its healthy state, is not sterile. The resident human airway microbiome is further altered in chronic inflammatory respiratory disease however little is known about the impact of nanoparticle inhalation on this airway microbiome. The composition of the airway microbiome, which is involved in the development and progression of respiratory disease is dynamic, adding further complexity to understanding microbiota-host interaction in the lung, particularly in the context of nanoparticle exposure. This article reviews the size-dependent properties of nanomaterials, their body deposition after inhalation and factors that influence their fate. We evaluate what is currently known about nanoparticle-microbiome interactions in the human airway and summarise the known clinical, immunological and toxicological consequences of this relationship. While associations between inhaled ambient ultrafine particles and host immune-inflammatory response are known, the airway and environmental microbiomes likely act as intermediaries and facilitate individual susceptibility to inhaled nanoparticles and toxicants. Characterising the precise interaction between the environment and airway microbiomes, inhaled nanoparticles and the host immune system is therefore critical and will provide insight into mechanisms promoting nanoparticle induced airway damage.

A review of nanostructured surfaces and materials for dental implants: surface coating, patterning and functionalization for improved performance

The emerging field of nanostructured implants has enormous scope in the areas of medical science and dental implants. Surface nanofeatures provide significant potential solutions to medical problems by the introduction of better biomaterials, improved implant design, and surface engineering techniques such as coating, patterning, functionalization and molecular grafting at the nanoscale. This review is of an interdisciplinary nature, addressing the history and development of dental implants and the emerging area of nanotechnology in dental implants. After a brief introduction to nanotechnology in dental implants and the main classes of dental implants, an overview of different types of nanomaterials (i.e. metals, metal oxides, ceramics, polymers and hydrides) used in dental implant together with their unique properties, the influence of elemental compositions, and surface morphologies and possible applications are presented from a chemical point of view. In the core of this review, the dental implant materials, physical and chemical fabrication techniques and the role of nanotechnology in achieving ideal dental implants have been discussed. Finally, the critical parameters in dental implant design and available data on the current dental implant surfaces that use nanotopography in clinical dentistry have been discussed.

Field Evaluation of N95 Filtering Facepiece Respirators on Construction Jobsites for Protection against Airborne Ultrafine Particles

Exposure to high concentrations of airborne ultrafine particles in construction jobsites may play an important role in the adverse health effects among construction workers, therefore adequate respiratory protection is required. The performance of particulate respirators has never been evaluated in field conditions against ultrafine particles on construction jobsites. In this study, respiratory protection levels against ultrafine particles of different size ranges were assessed during three common construction related jobs using a manikin-based set-up at 85 L/min air flow rate. Two NanoScan SMPS nanoparticle counters were utilized for measuring ultrafine particles in two sampling lines of the test filtering facepiece respirator-one from inside the respirator and one from outside the respirator. Particle size distributions were characterized using the NanoScan data collected from outside of the respirator. Two models of N95 respirators were tested-foldable and pleated. Collected data indicate that penetration of all categories of ultrafine particles can exceed 5% and smaller ultrafine particles of <36.5 nm size generally penetrated least. Foldable N95 filtering facepiece respirators were found to be less efficient than pleated N95 respirators in filtering nanoparticles mostly at the soil moving site and the wooden building frameworks construction site. Upon charge neutralization by isopropanol treatment, the ultrafine particles of larger sizes penetrated more compared to particles of smaller sizes. Our findings, therefore, indicate that N95 filtering facepiece respirators may not provide desirable 95% protection for most categories of ultrafine particles and generally, 95% protection is achievable for smaller particles of 11.5 to 20.5 nm sizes. We also conclude that foldable N95 respirators are less efficient than pleated N95 respirators in filtering ultrafine particles, mostly in the soil moving site and the wooden building framework construction site.

Characterization of paint dust aerosol generated from mechanical abrasion of TiO2-containing paints

The purpose of the study was to determine the potential for release of titanium dioxide nanoparticles in paint dust. The coatings aerosol resuspension system was developed and used for testing the generation and physical, chemical, and morphological properties of paint dust particles from mechanical abrasion (i.e., sanding) of coated wood surfaces. The paint dust emissions from bare and coated wood surfaces with multiple coatings using variable sandpaper grits were evaluated. Substantially higher particle number concentrations were measured for paint dust containing particles in the nano range (particles with aerodynamic diameter less than 100 nm) than those measured for wood dust. The variability of particle number concentration and size distribution of paint dust derived under different conditions indicated that considerable quantities of nanoparticles might be released from mechanical abrasion of painted surfaces that may induce unhealthy exposure conditions. Moreover, spectroscopic and microscopic analysis identified the presence of paint and wood components in paint dust, including titanium dioxide agglomerates that were originally embedded in the paint. The agglomerates were mostly attached to particles with sizes <100 nm, enabling them to potentially penetrate into the lower respiratory tract. These results demonstrated that the paint dust exposure generation system can provide qualitative and quantitative information on particle emissions and the abundance of nanoparticles from paint sanding in realistic conditions and they may be used to assess occupational and environmental exposures and risks. Furthermore, the prevalence of titanium dioxide nanoparticles in paint dust highlights the potential for exposures of painters and other occupational groups to hazardous paint dust and the need for protective devices and strategies aiming to reduce exposures to nanoparticles.

Physico-chemical foundations of particle-laden fluid interfaces

Particle-laden interfaces are ubiquitous nowadays. The understanding of their properties and structure is essential for solving different problems of technological and industrial relevance; e.g. stabilization of foams, emulsions and thin films. These rely on the response of the interface to mechanical perturbations. The complex mechanical response appearing in particle-laden interfaces requires deepening on the understanding of physico-chemical mechanisms underlying the assembly of particles at interface which plays a central role in the distribution of particles at the interface, and in the complex interfacial dynamics appearing in these systems. Therefore, the study of particle-laden interfaces deserves attention to provide a comprehensive explanation on the complex relaxation mechanisms involved in the stabilization of fluid interfaces.

Traffic-Related Particulate Matter and Cardiometabolic Syndrome: A Review

Traffic-related particulate matter (PM) is a major source of outdoor air pollution worldwide. It has been recently hypothesized to cause cardiometabolic syndrome, including cardiovascular dysfunction, obesity, and diabetes. The environmental and toxicological factors involved in the processes, and the detailed mechanisms remain to be explored. The objective of this study is to assess the current scientific evidence of traffic-related PM-induced cardiometabolic syndrome. We conducted a literature review by searching the keywords of “traffic related air pollution”, “particulate matter”, “human health”, and “metabolic syndrome” from 1980 to 2018. This resulted in 25 independent research studies for the final review. Both epidemiological and toxicological findings reveal consistent correlations between traffic-related PM exposure and the measured cardiometabolic health endpoints. Smaller sizes of PM, particularly ultrafine particles, are shown to be more harmful due to their greater concentrations, reactive compositions, longer lung retention, and bioavailability. The active components in traffic-related PM could be attributed to metals, black carbon, elemental carbon, polyaromatic hydrocarbons, and diesel exhaust particles. Existing evidence points out that the development of cardiometabolic symptoms can occur through chronic systemic inflammation and increased oxidative stress. The elderly (especially for women), children, genetically susceptible individuals, and people with pre-existing conditions are identified as vulnerable groups. To advance the characterization of the potential health risks of traffic-related PM, additional research is needed to investigate the detailed chemical compositions of PM constituents, atmospheric transformations, and the mode of action to induce adverse health effects. Furthermore, we recommend that future studies could explore the roles of genetic and epigenetic factors in influencing cardiometabolic health outcomes by integrating multi-omics approaches (e.g., genomics, epigenomics, and transcriptomics) to provide a comprehensive assessment of biological perturbations caused by traffic-related PM.

In vivo-induced size transformation of cerium oxide nanoparticles in both lung and liver does not affect long-term hepatic accumulation following pulmonary exposure

Recent findings show that cerium oxide (CeO2) nanoparticles may undergo in vivo-induced size transformation with the formation of smaller particles that could result in a higher translocation following pulmonary exposure compared to virtually insoluble particles, like titanium dioxide (TiO2). Therefore, we compared liver deposition of CeO2 and TiO2 nanoparticles of similar primary sizes 1, 28 or 180 days after intratracheal instillation of 162 μg of NPs in female C57BL/6 mice. Mice exposed to 162 μg CeO2 or TiO2 nanoparticles by intravenous injection or oral gavage were included as reference groups to assess the amount of NPs that reach the liver bypassing the lungs and the translocation of NPs from the gastrointestinal tract to the liver, respectively. Pulmonary deposited CeO2 nanoparticles were detected in the liver 28 and 180 days post-exposure and TiO2 nanoparticles 180 days post-exposure as determined by darkfield imaging and by the quantification of Ce and Ti mass concentration by inductively coupled plasma-mass spectrometry (ICP-MS). Ce and Ti concentrations increased over time and 180 days post-exposure the translocation to the liver was 2.87 ± 3.37% and 1.24 ± 1.98% of the initial pulmonary dose, respectively. Single particle ICP-MS showed that the size of CeO2 nanoparticles in both lung and liver tissue decreased over time. No nanoparticles were detected in the liver following oral gavage. Our results suggest that pulmonary deposited CeO2 and TiO2 nanoparticles translocate to the liver with similar calculated translocation rates despite their different chemical composition and shape. The observed particle size distributions of CeO2 nanoparticles indicate in vivo processing over time both in lung and liver. The fact that no particles were detected in the liver following oral exposure showed that direct translocation of nanoparticles from lung to the systemic circulation was the most important route of translocation for pulmonary deposited particles.

Nanoencapsulation of Polyphenols towards Dairy Beverage Incorporation

Phenolic compounds, while widely recognized for their biological potential, when added into food matrixes may interact with food constituents. One example of this is the interaction between phenolic compounds and proteins, that may result in the formation of complexes and alter the bioavailability of both phenolic compounds and the nutrient availability. Moreover, when adding compounds to improve the functionality of a food matrix, these interactions may compromise the perceived benefits of the additions. Nanoencapsulation has been considered one of the means to circumvent these interactions, as they may function as a physical barrier between the phenolic compounds and the matrix (preventing not only the loss of bioactivity, but eventual sensorial alterations of the foods), protect phenolic compounds through the gastrointestinal tract, and may enhance phenolic absorption through cellular endocytosis. However, despite these advantages the food industry is still limited in its nanotechnological solutions, as special care must be taken to use food-grade encapsulants which will not pose any deleterious effect towards human health. Therefore, this review aims to provide an encompassing view of the existing advantages and limitations of nanotechnology, associated with the inclusion of phenolic compounds in dairy beverages.

Effect of copper nanoparticles on the mineral content of tissues and droppings, and growth of chickens

We hypothesised that copper nanoparticles (NanoCu), because of their high physicochemical reactivity and bioavailability, could be used in much smaller quantities than bulk Cu, consequently reducing excretion of Cu into the environment. The objective of the study was to evaluate the effects of various levels of NanoCu on the development and growth of broiler chickens, in order to establish an optimum level of NanoCu dietary supplementation. Broiler chickens were randomly divided into five groups of 10 birds each. The control group received 7.5 mg Cu/kg feed (standard level) as CuSO₄, while groups fed with complexes of NanoCu and starch received 25%, 50%, 75% and 100% of the standard level of Cu used in the control group. Chicken growth and excretion of Cu, Fe and Zn were measured during the growth period from d 7 to 42. At d 42, the slaughter characteristics, the content of Cu, Fe and Zn in the breast muscle and liver, and the oxidative status were analysed. The results indicate that using NanoCu can reduce the standard level of Cu from CuSO₄ supplementation by 75% without jeopardising animal growth, and at the same time significantly decreasing Cu excretion into the environment.

Effects and Mechanism of Nano-Copper Exposure on Hepatic Cytochrome P450 Enzymes in Rats

Although nano-copper is currently used extensively, the adverse effects on liver cytochrome P450 (CYP450) enzymes after oral exposure are not clear. In this study, we determined the effects and mechanisms of action of nano- and micro-copper on the expression and activity of CYP450 enzymes in rat liver. Rats were orally exposed to micro-copper (400 mg/kg), Cu ion (100 mg/kg), or nano-copper (100, 200 and 400 mg/kg) daily for seven consecutive days. Histopathological, inflammatory and oxidative stress were measured in the livers of all rats. The mRNA levels and activity of CYP450 enzymes, as well as the mRNA levels of select nuclear receptors, were determined. Exposure to nano-copper (400 mg/kg) induced significant oxidative stress and inflammation relative to the controls, indicated by increased levels of interleukin (IL)-2, IL-6, interferon (IFN)-γ, macrophage inflammatory protein (MIP-1), total antioxidant capacity (T-AOC), malondialdehyde (MDA), inducible nitric oxide synthase (iNOS) and nitric oxide (NO) after exposure. The levels of mRNA expression of pregnane X receptor (PXR), constitutive androstane receptor (CAR) and aryl hydrocarbon receptor (AHR) were significantly decreased in 400 mg/kg nano-copper treated rats. Nano-copper activated the expression of the NF-kappa B (NF-κB), mitogen-activated protein kinase (MAPK) and signal transducer and activator of transcription (STAT)3 signaling pathways. Nano-copper decreased the mRNA expression and activity of CYP 1A2, 2C11, 2D6, 2E1 and 3A4 in a dose-dependent manner. The adverse effects of micro-copper are less severe than those of nano-copper on the CYP450 enzymes of rats after oral exposure. Ingestion of large amounts of nano-copper in animals severely affects the drug metabolism of the liver by inhibiting the expression of various CYP450 enzymes, which increases the risk of drug-drug interactions in animals.

Toxicological status of nanoparticles: What we know and what we don't know

The field of nanotechnology has grown exponentially during the last few decades, due in part to the use of nanoparticles in many manufacturing processes, as well as their potential as clinical agents for treatment of diseases and for drug delivery. This has created several new avenues by which humans can be exposed to nanoparticles. Unfortunately, investigations assessing the toxicological impacts of nanoparticles (i.e. nanotoxicity), as well as their possible risks to human health and the environment, have not kept pace with the rapid rise in their use. This has created a gap-in-knowledge and a substantial need for more research. Studies are needed to help complete our understanding of the mechanisms of toxicity of nanoparticles, as well as the mechanisms mediating their distribution and accumulation in cells and tissues and their elimination from the body. This review summarizes our knowledge on nanoparticles, including their various applications, routes of exposure, their potential toxicity and risks to human health.

Incineration of Nanoclay Composites Leads to Byproducts with Reduced Cellular Reactivity

Addition of nanoclays into a polymer matrix leads to nanocomposites with enhanced properties to be used in plastics for food packaging applications. Because of the plastics' high stored energy value, such nanocomposites make good candidates for disposal via municipal solid waste plants. However, upon disposal, increased concerns related to nanocomposites' byproducts potential toxicity arise, especially considering that such byproducts could escape disposal filters to cause inhalation hazards. Herein, we investigated the effects that byproducts of a polymer polylactic acid-based nanocomposite containing a functionalized montmorillonite nanoclay (Cloisite 30B) could pose to human lung epithelial cells, used as a model for inhalation exposure. Analysis showed that the byproducts induced toxic responses, including reductions in cellular viability, changes in cellular morphology, and cytoskeletal alterations, however only at high doses of exposure. The degree of dispersion of nanoclays in the polymer matrix appeared to influence the material characteristics, degradation, and ultimately toxicity. With toxicity of the byproduct occurring at high doses, safety protocols should be considered, along with deleterious effects investigations to thus help aid in safer, yet still effective products and disposal strategies.

Intracellular Transport of Silver and Gold Nanoparticles and Biological Responses: An Update

Medicine, food, and cosmetics represent the new promising applications for silver (Ag) and gold (Au) nanoparticles (NPs). AgNPs are most commonly used in food and cosmetics; conversely, the main applications of gold NPs (AuNPs) are in the medical field. Thus, in view of the risk of accidentally or non-intended uptake of NPs deriving from the use of cosmetics, drugs, and food, the study of NPs⁻cell interactions represents a key question that puzzles researchers in both the nanomedicine and nanotoxicology fields. The response of cells starts when the NPs bind to the cell surface or when they are internalized. The amount and modality of their uptake depend on many and diverse parameters, such as NPs and cell types. Here, we discuss the state of the art of the knowledge and the uncertainties regarding the biological consequences of AgNPs and AuNPs, focusing on NPs cell uptake, location, and translocation. Finally, a section will be dedicated to the most currently available methods for qualitative and quantitative analysis of intracellular transport of metal NPs.

Nanoparticle wrapping at small non-spherical vesicles: curvatures at play

Nanoparticles in biological systems encounter lipid-bilayer membranes as barriers. They interact with plasma membranes, membranous organelles, such as the endoplasmic reticulum and the Golgi apparatus, the nucleus, and intracellular and extracellular vesicles, such as autophagosomes, lysosomes, and exosomes. Extracellular vesicles have recently attracted particular attention, as they are involved in the transmission of biological signals and as regulators for biological processes. For example, exosomes, small vesicles containing proteins, mRNA, and miRNA, that are released by cells into the extracellular environment, have been suggested to participate in tumor metastasis. Furthermore, vesicles can be applied as targeted-drug-delivery systems. We systematically characterize wrapping of spherical nanoparticles that enter and exit vesicles, depending on particle size, vesicle size, vesicle reduced volume, and membrane spontaneous curvature. We predict the complex wrapping behavior, in particular for large particle-to-vesicle size ratios, where the shape changes of the free membrane contribute significantly to the deformation energy and where nanoparticle wrapping transitions and vesicle shape transitions are coupled. Partial-wrapped membrane-bound particles impose boundary conditions on the membrane that stabilise oblates and stomatocytes for particle entry, and prolates and stomatocytes for particle exit. Our results suggest that nanoparticles may stimulate autophagocytic engulfment, which would facilitate transport of the nanoparticles into lysosomes and would lead to subsequent degradation of nanoparticle-attached proteins.

Identification of polystyrene nanoparticle penetration across intact skin barrier as rare event at sites of focal particle aggregations

The question whether nanoparticles can cross the skin barrier is highly debated. Even in intact skin rare events of deeper penetration have been reported, but technical limitations and possible artifacts require careful interpretation. In this study, horizontal scanning by 2-photon microscopy (2 PM) of full-thickness human skin samples placed in a lateral position yielded highly informative images for skin penetration studies of fluorescently tagged nanoparticles. Scanning of large fields of view allowed for detailed information on interfollicular and follicular penetration in tissue blocks without damaging the sample. Images in histomorphological correlation showed that 2P-excited fluorescence signals of fluorescently tagged 20 and 200 nm polystyrene nanoparticles preferentially accumulated in the stratum corneum (SC) and in the upper part of vellus hair follicles (HFs). Rare events of deeper penetration in the SC and in the infundibulum of vellus HFs were observed at sites of high focal particle aggregations. Wide-field 2 PM allows for imaging of nanoparticle penetration in large tissue blocks, whereas total internal reflection microscopy (TIRFM) enables selective detection of individual nanoparticles as well as clusters of nanoparticles in the SC and within the epidermal layer directly beneath the SC, thus confirming barrier crossing with high sensitivity.

Horizon scanning implanted biosensors in personalising breast cancer management: First pilot study of breast cancer patients views

AIMS

This study aimed to explore breast cancer patients' understanding and acceptability of implanted biosensors (BS) within the primary tumour to personalise adjuvant radiotherapy, and to determine optimal design and number of BS, and evaluate potential clinical benefits as well as concerns about tolerance, toxicity, dwell time, and confidentiality of data.

PATIENTS AND METHODS

A total of 32 patients treated by surgery (29 breast conserving, 3 mastectomy), postoperative radiotherapy and systemic therapy for early breast cancer, were recruited from a posttreatment radiotherapy clinic at a cancer centre. Patients participated in semistructured interviews. Interview transcripts were analysed using qualitative methods.

RESULTS

Participants were aged 39 to 87 years, with a median age of 62 years. Most (N = 23[72%]) were unfamiliar with biosensors. The majority (N = 29[90.6%]) were supportive of the technology's potential use in future breast cancer treatment and were willing to accept biosensors (N = 28[88%]) if they were endorsed by their breast cancer consultant. Only 3 patients expressed concerns, predominantly about uncertainties on their role in the diagnostic and treatment pathway. Patients were flexible about the size and shape of BS, but had a preference for small size (N = 28 [87.5%]). Most (N = 22[69%]) would accept implantation of more than 5 BS and were flexible (N = 22[69%]) about indefinite dwell time. Patients had a strong preference for wireless powering of the BS (N = 28[87.5%]). Few had concerns about loss of confidentiality of data collected. All patients considered biosensors to be potentially of important clinical benefit.

CONCLUSIONS

While knowledge of biosensors was limited, patients were generally supportive of biosensors implanted within the primary tumour to collect data that might personalise and improve breast cancer radiotherapy in future.

Role of Nanotechnology in Cosmeceuticals: A Review of Recent Advances

Nanotechnology manifests the progression in the arena of research and development, by increasing the efficacy of the product through delivery of innovative solutions. To overcome certain drawbacks associated with the traditional products, application of nanotechnology is escalating in the area of cosmeceuticals. Cosmeceuticals are regarded as the fastest growing segment of the personal care industry and the use has risen drastically over the years. Nanocosmeceuticals used for skin, hair, nail, and lip care, for conditions like wrinkles, photoaging, hyperpigmentation, dandruff, and hair damage, have come into widespread use. Novel nanocarriers like liposomes, niosomes, nanoemulsions, microemulsion, solid lipid nanoparticles, nanostructured lipid carrier, and nanospheres have replaced the usage of conventional delivery system. These novel nanocarriers have advantages of enhanced skin penetration, controlled and sustained drug release, higher stability, site specific targeting, and high entrapment efficiency. However, nanotoxicological researches have indicated concern regarding the impact of increased use of nanoparticles in cosmeceuticals as there are possibilities of nanoparticles to penetrate through skin and cause health hazards. This review on nanotechnology used in cosmeceuticals highlights the various novel carriers used for the delivery of cosmeceuticals, their positive and negative aspects, marketed formulations, toxicity, and regulations of nanocosmeceuticals.

Water treatment by new-generation graphene materials: hope for bright future

Water is the most important and essential component of earth's ecosystem playing a vital role in the proper functioning of flora and fauna. But, our water resources are contaminating continuously. The whole world may be in great water scarcity after few decades. Graphene, a single-atom thick carbon nanosheet, and graphene nanomaterials have bright future in water treatment technologies due to their extraordinary properties. Only few papers describe the use of these materials in water treatment by adsorption, filtration, and photodegradation methods. This article presents a critical evaluation of the contribution of graphene nanomaterials in water treatment. Attempts have been made to discuss the future perspectives of these materials in water treatment. Besides, the efforts are made to discuss the nanotoxicity and hazards of graphene-based materials. The suggestions are given to explore the full potential of these materials along with precautions of nanotoxicity and its hazards. It was concluded that the future of graphene-based materials is quite bright.

Magnetic Nanoparticles Interact and Pass an In Vitro Co-Culture Blood-Placenta Barrier Model

Magnetic nanoparticles are interesting tools for biomedicine. Before application, critical prerequisites have to be fulfilled. An important issue is the contact and interaction with biological barriers such as the blood-placenta barrier. In order to study these processes in detail, suitable in vitro models are needed. For that purpose a blood-placenta barrier model based on the trophoblast-like cell line BeWo and primary placenta-derived pericytes was established. This model was characterized by molecular permeability, transepithelial electrical resistance and cell-cell-contact markers. Superparamagnetic iron oxide nanoparticles (SPIONs) with cationic, anionic or neutral surface charge were applied. The localization of the nanoparticles within the cells was illustrated by histochemistry. The time-dependent passage of the nanoparticles through the BeWo/pericyte barrier was measured by magnetic particle spectroscopy and atomic absorption spectroscopy. Cationically coated SPIONs exhibited the most extensive interaction with the BeWo cells and remained primarily in the BeWo/pericyte cell layer. In contrast, SPIONs with neutral and anionic surface charge were able to pass the cell layer to a higher extent and could be detected beyond the barrier after 24 h. This study showed that the mode of SPION interaction with and passage through the in vitro blood-placenta barrier model depends on the surface charge and the duration of treatment.

Dependence of Nanoparticle Toxicity on Their Physical and Chemical Properties

Studies on the methods of nanoparticle (NP) synthesis, analysis of their characteristics, and exploration of new fields of their applications are at the forefront of modern nanotechnology. The possibility of engineering water-soluble NPs has paved the way to their use in various basic and applied biomedical researches. At present, NPs are used in diagnosis for imaging of numerous molecular markers of genetic and autoimmune diseases, malignant tumors, and many other disorders. NPs are also used for targeted delivery of drugs to tissues and organs, with controllable parameters of drug release and accumulation. In addition, there are examples of the use of NPs as active components, e.g., photosensitizers in photodynamic therapy and in hyperthermic tumor destruction through NP incorporation and heating. However, a high toxicity of NPs for living organisms is a strong limiting factor that hinders their use in vivo. Current studies on toxic effects of NPs aimed at identifying the targets and mechanisms of their harmful effects are carried out in cell culture models; studies on the patterns of NP transport, accumulation, degradation, and elimination, in animal models. This review systematizes and summarizes available data on how the mechanisms of NP toxicity for living systems are related to their physical and chemical properties.

Copper oxide nanoparticles induce collagen deposition via TGF-β1/Smad3 signaling in human airway epithelial cells

Use and application of nanoparticles has increased in recent years. Copper oxide nanoparticles (CuONPs) are one of the most common types of nanoparticles, and they are mainly used as catalysts and preservatives. However, limited toxicity data are available on the toxicity of CuONPs to the respiratory system. We investigated fibrotic responses induced by CuONPs in the respiratory tract and elucidated its underlying mechanism of action in vivo and in vitro experiments. In the mouse model, CuONPs exposure markedly increased transforming growth factor-β1 (TGF-β1) and collagen I expression and Smad3 phosphorylation, combined with elevation of inflammatory mediators including interleukin (IL)-1β, IL-6, and tumor necrosis factor-α (TNF-α). These alterations were also observed in histological analysis of lung tissue. CuONPs markedly increased inflammatory responses and collagen deposition, accompanied by the elevation of TGF-β1 and collagen I expression in lung tissue. In addition, CuONPs-treated H292 cells showed significantly increased mRNA and protein production of TGF-β1, collagen I, IL-6, and TNF-α; this response was markedly decreased by treatment of a TGF-β1 inhibitor (SB-431542). Taken together, CuONPs induced fibrotic responses in the respiratory tract, closely related to TGF-β1/Smad3 signaling. Therefore, our results raise the necessity of further investigation for the present state of its risk by providing useful information of the toxicity of CuONPs.

Toxicity Evaluation of Graphene Oxide and Titania Loaded Nafion Membranes in Zebrafish

The use of nanomaterials in several application fields has received in the last decades a great attention due to their peculiar properties, but also raised many doubts about possible toxicity when these materials are used for some specific applications, such as water purification. Indeed a careful investigation is needed in order to exclude possible harmful side effects related to the use of nanotechnology. Nanoparticles effects on the marine organisms may depend on their chemical composition, size, surface structure, solubility, shape and how the individual nanoparticles aggregate together. In order to make the most of their potential, without polluting the environment, many researchers are trying to trap them into some kind of matrix that keeps them active but avoids their dispersion in the environment. In this study we have tested nanocomposite membranes prepared using Nafion polymer combined with various fillers, such as anatase-type TiO2 nanoparticles and graphene oxide. The non-toxicity of these nanocomposites, already shown to be effective for water purification applications in our previous studies, was recognized by testing the effect of the different materials on zebrafish embryos. Zebrafish was considered an excellent model for ecotoxicological studies and for this motivation zebrafish embryos were exposed to different concentrations of free nanoparticles and to the nanocomposite membranes. As biomarkers of exposure, we evaluated the expression of heme-oxygenase 1 and inducible Nitric Oxide Synthases by immunohistochemistry and gene expression. Embryo toxicity test showed that nor sublethal effects neither mortality were caused by the different nanoparticles and nano-systems tested. Only zebrafish larvae exposed to free nanoparticles have shown a different response to antibodies anti-heme-oxygenase 1 and anti- inducible Nitric Oxide Synthases. The immunolocalization analysis in fact has highlighted an increase in the synthesis of these biomarkers.

Review of measurement techniques and methods for assessing personal exposure to airborne nanomaterials in workplaces

Exposure to airborne agents needs to be assessed in the personal breathing zone by the use of personal measurement equipment. Specific measurement devices for assessing personal exposure to airborne nanomaterials have only become available in the recent years. They can be differentiated into direct-reading personal monitors and personal samplers that collect the airborne nanomaterials for subsequent analyses. This article presents a review of the available personal monitors and samplers and summarizes the available literature regarding their accuracy, comparability and field applicability. Due to the novelty of the instruments, the number of published studies is still relatively low. Where applicable, literature data is therefore complemented with published and unpublished results from the recently finished nanoIndEx project. The presented data show that the samplers and monitors are robust and ready for field use with sufficient accuracy and comparability. However, several limitations apply, e.g. regarding the particle size range of the personal monitors and their in general lower accuracy and comparability compared with their stationary counterparts. The decision whether a personal monitor or a personal sampler shall be preferred depends strongly on the question to tackle. In many cases, a combination of a personal monitor and a personal sampler may be the best choice to obtain conclusive results.

Nanopyroxene Grafting with β-Cyclodextrin Monomer for Wastewater Applications

Emerging nanoparticle technology provides opportunities for environmentally friendly wastewater treatment applications, including those in the large liquid tailings containments in the Alberta oil sands. In this study, we synthesize β-cyclodextrin grafted nanopyroxenes to offer an ecofriendly platform for the selective removal of organic compounds typically present in these types of applications. We carry out computational modeling at the micro level through molecular mechanics and molecular dynamics simulations and laboratory experiments at the macro level to understand the interactions between the synthesized nanomaterials and two-model naphthenic acid molecules (cyclopentanecarboxylic and trans-4-pentylcyclohexanecarboxylic acids) typically existing in tailing ponds. The proof-of-concept computational modeling and experiments demonstrate that monomer grafted nanopyroxene  or nano-AE of the sodium iron-silicate aegirine are found to be promising candidates for the removal of polar organic compounds from wastewater, among other applications. These nano-AE offer new possibilities for treating tailing ponds generated by the oil sands industry.

Dosimetric Quantification of Coating-Related Uptake of Silver Nanoparticles

The elucidation of mechanisms underlying the cellular uptake of nanoparticles (NPs) is an important topic in nanotoxicological research. Most studies dealing with silver NP uptake provide only qualitative data about internalization efficiency and do not consider NP-specific dosimetry. Therefore, we performed a comprehensive comparison of the cellular uptake of differently coated silver NPs of comparable size in different human intestinal Caco-2 cell-derived models to cover also the influence of the intestinal mucus barrier and uptake-specialized M-cells. We used a combination of the Transwell system, transmission electron microscopy, atomic absorption spectroscopy, and ion beam microscopy techniques. The computational in vitro sedimentation, diffusion, and dosimetry (ISDD) model was used to determine the effective dose of the particles in vitro based on their individual physicochemical characteristics. Data indicate that silver NPs with a similar size and shape show coating-dependent differences in their uptake into Caco-2 cells. The internalization of silver NPs was enhanced in uptake-specialized M-cells while the mucus did not provide a substantial barrier for NP internalization. ISDD modeling revealed a fivefold underestimation of dose-response relationships of NPs in in vitro assays. In summary, the present study provides dosimetry-adjusted quantitative data about the influence of NP coating materials in cellular uptake into human intestinal cells. Underestimation of particle effects in vitro might be prevented by using dosimetry models and by considering cell models with greater proximity to the in vivo situation, such as the M-cell model.

Therapeutic nanomedicine surmounts the limitations of pharmacotherapy

Science always strives to find an improved way of doing things and nanoscience is one such approach. Nanomaterials are suitable for pharmaceutical applications mostly because of their size which facilitates absorption, distribution, metabolism and excretion of the nanoparticles. Whether labile or insoluble nanoparticles, their cytotoxic effect on malignant cells has moved the use of nanomedicine into focus. Since nanomedicine can be described as the science and technology of diagnosing, treating and preventing diseases towards ultimately improving human health, a lot of nanotechnology options have received approval by various regulatory agencies. Nanodrugs also have been discovered to be more precise in targeting the desired site, hence maximizing the therapeutic effects, while minimizing side-effects on the rest of the body. This unique property and more has made nanomedicine popular in therapeutic medicine employing nanotechnology in genetic therapy, drug encapsulation, enzyme manipulation and control, tissue engineering, target drug delivery, pharmacogenomics, stem cell and cloning, and even virus-based hybrids. This review highlights nanoproducts that are in development and have gained approval through one clinical trial stage or the other.

Apoptosis-mediated neurotoxicity and altered gene expression induced by silver nanoparticles

Although not fully recognized, the neurotoxic effects of silver nanoparticles (Ag-NPs) are thought to occur through induction of oxidative stress and apoptosis. To investigate the exact underlying molecular mechanism, we aimed to explore the apoptotic effects of intraperitoneal injection of Ag-NPs and investigated the possible attributed changes in the mRNA expression of Bcl-2 and Bax genes in the rat hippocampus. Two in vivo sets of experiments, one to demonstrate apoptosis and the other to assess gene expression, were conducted on male Wistar rats. In each set, the first group, acting as control, received saline and the other three groups received Ag-NP at doses of 100, 200, and 400 ppm for five successive days. Ten days after the last injection, hippocampal tissue of the first set of rats was assessed for apoptosis using terminal deoxynucleotidyl transferase-mediated deoxy uridine triphosphate nick-end labeling staining. In the second set of experiments, mRNA expression of Bcl-2 and Bax genes was evaluated using real-time polymerase chain reaction. Ag-NP treatment was shown to induce apoptosis in a dose-dependent manner. Furthermore, Ag-NP reduced mRNA level of Bcl-2 in the rat hippocampal cells at all investigated doses compared to the control group ( p < 0.001). The mRNA level of Bax, on the other hand, was increased in these cells. The increase was significant compared to the control group at the doses of 200 ppm ( p < 0.05) and 400 ppm ( p < 0.001). Our results show that Ag-NPs reduce Bcl-2 and increase Bax genes expression, resulting in increased Bax/Bcl-2 ratios in rat hippocampal cells. This altered gene expression induces cell apoptosis and contributes to the neurotoxicity of Ag-NPs.

Emerging Challenges and Opportunities for Education and Research in Weed Science

In modern agriculture, with more emphasis on high input systems, weed problems are likely to increase and become more complex. With heightened awareness of adverse effects of herbicide residues on human health and environment and the evolution of herbicide-resistant weed biotypes, a significant focus within weed science has now shifted to the development of eco-friendly technologies with reduced reliance on herbicides. Further, with the large-scale adoption of herbicide-resistant crops, and uncertain climatic optima under climate change, the problems for weed science have become multi-faceted. To handle these complex weed problems, a holistic line of action with multi-disciplinary approaches is required, including adjustments to technology, management practices, and legislation. Improved knowledge of weed ecology, biology, genetics, and molecular biology is essential for developing sustainable weed control practices. Additionally, judicious use of advanced technologies, such as site-specific weed management systems and decision support modeling, will play a significant role in reducing costs associated with weed control. Further, effective linkages between farmers and weed researchers will be necessary to facilitate the adoption of technological developments. To meet these challenges, priorities in research need to be determined and the education system for weed science needs to be reoriented. In respect of the latter imperative, closer collaboration between weed scientists and other disciplines can help in defining and solving the complex weed management challenges of the 21st century. This consensus will provide more versatile and diverse approaches to innovative teaching and training practices, which will be needed to prepare future weed science graduates who are capable of handling the anticipated challenges of weed science facing in contemporary agriculture. To build this capacity, mobilizing additional funding for both weed research and weed management education is essential.

Impact of copper oxide nanomaterials on differentiated and undifferentiated Caco-2 intestinal epithelial cells; assessment of cytotoxicity, barrier integrity, cytokine production and nanomaterial penetration

BACKGROUND

Copper oxide nanomaterials (CuO NMs) are exploited in a diverse array of products including antimicrobials, inks, cosmetics, textiles and food contact materials. There is therefore a need to assess the toxicity of CuO NMs to the gastrointestinal (GI) tract since exposure could occur via direct oral ingestion, mucocillary clearance (following inhalation) or hand to mouth contact.

METHODS

Undifferentiated Caco-2 intestinal cells were exposed to CuO NMs (10 nm) at concentrations ranging from 0.37 to 78.13 μg/cm2 Cu (equivalent to 1.95 to 250 μg/ml) and cell viability assessed 24 h post exposure using the alamar blue assay. The benchmark dose (BMD 20), determined using PROAST software, was identified as 4.44 μg/cm2 for CuO NMs, and 4.25 μg/cm2 for copper sulphate (CuSO4), which informed the selection of concentrations for further studies. The differentiation status of cells and the impact of CuO NMs and CuSO4 on the integrity of the differentiated Caco-2 cell monolayer were assessed by measurement of trans-epithelial electrical resistance (TEER), staining for Zonula occludens-1 (ZO-1) and imaging of cell morphology using scanning electron microscopy (SEM). The impact of CuO NMs and CuSO4 on the viability of differentiated cells was performed via assessment of cell number (DAPI staining), and visualisation of cell morphology (light microscopy). Interleukin-8 (IL-8) production by undifferentiated and differentiated Caco-2 cells following exposure to CuO NMs and CuSO4 was determined using an ELISA. The copper concentration in the cell lysate, apical and basolateral compartments were measured with Inductive Coupled Plasma Optical Emission Spectrometry (ICP-OES) and used to calculate the apparent permeability coefficient (Papp); a measure of barrier permeability to CuO NMs. For all experiments, CuSO4 was used as an ionic control.

RESULTS

CuO NMs and CuSO4 caused a concentration dependent decrease in cell viability in undifferentiated cells. CuO NMs and CuSO4 translocated across the differentiated Caco-2 cell monolayer. CuO NM mediated IL-8 production was over 2-fold higher in undifferentiated cells. A reduction in cell viability in differentiated cells was not responsible for the lower level of cytokine production observed. Both CuO NMs and CuSO4 decreased TEER values to a similar extent, and caused tight junction dysfunction (ZO-1 staining), suggesting that barrier integrity was disrupted.

CONCLUSIONS

CuO NMs and CuSO4 stimulated IL-8 production by Caco-2 cells, decreased barrier integrity and thereby increased the Papp and translocation of Cu. There was no significant enhancement in potency of the CuO NMs compared to CuSO4. Differentiated Caco-2 cells were identified as a powerful model to assess the impacts of ingested NMs on the GI tract.