Pyrene-functionalized poly(methacrylic acid) acts as an efficient stabilizer for graphene nanoplatelets and facilitates their use in waterborne latex formulations

HYPOTHESIS

Pyrene derivatives are effective motifs when designing graphene-philic surfactants, enabling the use of hydrophobic graphene-based nanomaterials in waterborne formulations. Hence, novel pyrene end-functionalized polymeric stabilizers show promise for stabilizing aqueous graphene nanomaterial dispersions, and offer benefits over traditional small molecule surfactants.

EXPERIMENTS

Pyrene end-functionalized poly(methacrylic acid) (Py-PMAAn, where n = 68 to 128) was synthesized by reversible addition-fragmentation chain-transfer (RAFT) polymerization of MAA using a pyrene-containing RAFT chain-transfer agent. These polymers were evaluated as aqueous graphene nanoplatelet (GNP) stabilizers. Subsequently, polymer-stabilized GNPs were formulated into film-forming polymer latex dispersions and the properties of the resulting GNP-containing films measured.

FINDINGS

Py-PMAAn homopolymers with well-defined molecular weights were prepared via RAFT solution polymerization. They served as efficient stabilizers for aqueous GNP dispersions and performed better than a traditional small molecule surfactant and non-functionalized PMAA, especially at higher pH and with higher molecular weight polymers. The use of Py-PMAAn allowed GNPs to be readily formulated into waterborne latex coatings. When compared to controls, the resulting films were significantly reinforced due to the improved homogeneity of dried nanocomposite films and chain entanglement between the polymer matrix and stabilizers. Thus, the ability to readily incorporate GNPs into aqueous formulations and enhance GNP/polymer matrix interfaces was demonstrated for these novel amphiphilic stabilizers.

Boosting electrocatalytic nitrate-to-ammonia of single Fe active sites via coordination engineering: From theory to experiments

Atomically dispersed iron-nitrogen-carbon (Fe-N4-C) catalysts show great promises for the electrocatalytic nitrate (NO3-) reduction to ammonia (NH3). Nevertheless, the microenvironmental engineering of the single Fe active sites for further optimizing the catalytic performance remains a challenge. Herein, we proposed to regulate the coordination environment of single Fe active sites to boost its intrinsic electrocatalytic activity for NO3- -to-NH3 conversion by the incorporation of new heteroatoms, including B, C, O, Si, P, and S. Our results revealed that most of the candidates possess low formation energies, showing great potential for experimental synthesis. Moreover, incorporating heteroatoms effectively modulates the charge redistribution and the d-band center of single Fe active sites, enabling the regulation of the binding strength of nitrogenous intermediates. As a result, the N and C coordinated Fe active site (Fe-N3C) exhibits superior catalytic performance for NO3- electroreduction with a relatively low limiting potential (-0.13 V) due to its optimal adsorption strength with nitrogenous intermediates induced by its moderate charge and d-band center. Importantly, our experimental measures confirmed such theoretical prediction: a maximum NH3 yield rate of 21.07 mg h-1 mgcat.-1 and 95.74 % Faradaic efficiency were achieved for NO3- electroreduction on Fe-N3C catalyst. These findings not only suggest a highly efficient catalyst for nitrate reduction but also provide insight into how to design and prepare electrocatalysts with enhanced catalytic performance.

From graphite of used lithium-ion batteries to holey graphite coated by carbon with enhanced lithium storage capability

The efficient recycling of waste graphite anode from used lithium-ion batteries (LIBs) has attracted considerable concerns mainly owing to the environment protection and reutilization of resources. Herein, we reported a rational and facile strategy for the synthesis of holey graphite coated by carbon (hG0.01@C0.10) through the separation, purification and creation of holey structures of waste graphite by using NaOH and carbon-coating by using phenolic resin. The holey structures facilitate the hG0.01@C0.10 with the quick penetration of electrolytes and rapid diffusion of Li+. The carbon coating is more favorable for hG0.01@C0.10 with improved electronic conductivity and less alleviated volume during the cycles. Benefiting from the synergistic effect of holey structures and carbon coating, the hG0.01@C0.10 as anode for LIBs displays a high reversible capacity of 377.6 mAh g-1 at 0.5 C and superior rate capabilities (e.g., 348.0 and 274.7 mAh g-1 at 1 and 2 C, respectively) and maintains a high reversible capacity of 278.7 mAh g-1 at 1 C after 300 cycles with an initial capacity retention of 80.0 %.

Controllable decomposition/recrystallization of water-sensitive CsPbBr3 glass ceramics for dynamic anti-counterfeiting with high security

Due to the sensitivity to water, the all-inorganic CsPbBr3 nanocrystals have been widely applied in information encryption with spatial dimensions. However, the absence of time-dimension information limits the information capacity for the application of CsPbBr3. In this work, the CsPbBr3 nanocrystal was combined with water-sensitive borophosphate glass, achieving decomposing/recrystallization of CsPbBr3 nanocrystal with multi-dimension. The addition of SiO2 confirms that the collapse of the borophosphate glass network structure causes the exposure of the CsPbBr3 nanocrystals. The decomposition and recrystallization mechanism of CsPbBr3 nanocrystals in glass-ceramics upon encountering water has been verified. Finally, an information encryption strategy, using the mixture of CsPbBr3 glass ceramic and sodium carboxymethylcellulose as ink, is designed via adopting screen-printing technology, which not only provides a new idea for the preparation of CsPbBr3 nanocrystals, but also establish a new avenue for the information encryption technology.

Aggregation-induced emission: Application in diagnosis and therapy of hepatocellular carcinoma

Hepatocellular carcinoma (HCC) is a serious health issue due to its low early diagnosis rate, resistance to chemotherapy, and poor five-year survival rate. Therefore, it is crucial to explore novel diagnostic and therapeutic approaches tailored to the characteristics of HCC. Aggregation-induced emission (AIE) is a phenomenon where the luminescence of certain molecules, typically non-luminescent or weakly luminescent in solution, is significantly enhanced upon aggregation. AIE has been extensively applied in bioimaging, biosensors, and therapy. Fluorophore materials based on AIE (AIEgens) have a wide range of application scenarios and potential for clinical translation. This review focuses on recent advances in AIE-based strategies for diagnosing and treating HCC. First, the specific functional mechanism of AIE is described. Next, we summarize recent progress in the application of AIE for multimodal imaging, biosensor detection, and phototherapy. Finally, prospects and challenges for the AIE-based application in the diagnosis and therapy of HCC are discussed.

Ultrasensitive pH-switchablenitrogen doped carbon dots for MnO4- detection and fluorescent anti-counterfeiting

Herein, high-efficiency green fluorescence nitrogen doped CDs (G-CDs) were prepared using acetaminophen and ethylenediamine as precursors. The G-CDs exhibited good anti-photobleaching, salttolerance and low cytotoxicity. Interestingly, the G-CDs revealed excellent fluorescence stability in the pH range of 6-12, however, the intensity of the G-CDs was almost completely quenched in other pH values. The MnO4- demonstrated strong fluorescence quenching capability on our G-CDs with the mechanism involving dynamic quenching caused by energy transfer. G-CDs exhibited a strong linear relationship with MnO4- concentration in the range of 0-75 μmol/L, with a low limit detection of 7.6 nmol/L. What was even more interesting was that the G-CDs displayed bright green solid-state fluorescence, and exhibited potential application in anti-counterfeiting.

Rapid miRNA detection enhanced by exponential hybridization chain reaction in graphene field-effect transistors

Scalable electronic devices that can detect target biomarkers from clinical samples hold great promise for point-of-care nucleic acid testing, but still cannot achieve the detection of target molecules at an attomolar range within a short timeframe (<1 h). To tackle this daunting challenge, we integrate graphene field-effect transistors (GFETs) with exponential target recycling and hybridization chain reaction (TRHCR) to detect oligonucleotides (using miRNA as a model disease biomarker), achieving a detection limit of 100 aM and reducing the sensing time by 30-fold, from 15 h to 30 min. In contrast to traditional linear TRHCR, our exponential TRHCR enables the target miRNA to initiate an autocatalytic system with exponential kinetics, significantly accelerating the reaction speed. The resulting reaction products, long-necked double-stranded polymers with a negative charge, are effectively detected by the GFET through chemical gating, leading to a shift in the Dirac voltage. Therefore, by monitoring the magnitude of this voltage shift, the target miRNA is quantified with high sensitivity. Consequently, our approach successfully detects 22-mer miRNA at concentrations as low as 100 aM in human serum samples, achieving the desired short timeframe of 30 min, which is congruent with point-of-care testing, and demonstrates superior specificity against single-base mismatched interfering oligonucleotides.

Double hook-type aptamer-based colorimetric and electrochemical biosensor enables rapid and robust analysis of EpCAM expression

Epithelial cell adhesion molecule (EpCAM), which is overexpressed in breast cancer cells and participates in cell signaling, migration, proliferation, and differentiation, has been utilized as a biomarker for cancer diagnosis and therapeutic prognosis. Here, a dual-signal readout nonenzymatic aptasensor is fabricated for the evaluation of EpCAM at the level of three breast cancer cell lines. The central principle of this enzyme-free aptasensor is the use of double hook-type aptamers (SYL3C and SJ3C2)-functionalized magnetic iron oxide (Fe3O4) as capture probes and quasi-CoFe prussian blue analogs (QCoFe PBAs) as nonenzymatic signal probes for colorimetric and electrochemical analysis. Following ligand detachment, the CoFe PBA was transformed to QCoFe PBA (calcined at 350 °C for 1 h), with its metal active sites exposed by controllable pyrolysis. We found that the enhanced sensitivity was attributed to the resonance effect of QCoFe PBA with the remarkable enzymatic properties. The dual-signal readout nonenzymatic aptasensor exhibited limits of detection for EpCAM as low as 0.89 pg mL-1 and 0.24 pg mL-1, within a wide linear range from 0.001 to 100 ng mL-1, respectively. We successfully employed this nonenzymatic aptasensor for monitoring EpCAM expression in three breast cancer cell lines, which provides an economical and robust alternative to costly and empirical flow cytometry. The dual-signal readout nonenzymatic aptasensor provides rapid, robust, and promising technological support for the accurate management of tumors.

Ultrasensitive detection of contaminants in milk using a novel NMS-Ag modified water-resistant paper substrate

Rapid and precise detection of harmful substances in food products is essential for ensuring public health and safety. This study introduces a novel surface-enhanced Raman spectroscopy (SERS) substrate, composed of a molybdenum disulfide‑silver nanocomposite, applied to flexible, water-resistant filter paper for detecting melamine and bisphenol A (BPA) in milk. Optimized molybdenum disulfide (NMS) nanoflowers (NFs) were synthesized through hydrothermal methods and high-temperature annealing, then modified with silver (Ag) nanoparticles to form the NMS-Ag nanocomposite (NMSA6). This substrate greatly enhances the Raman signal, achieving an enhancement factor of approximately 1.49 × 107 and a detection limit as low as 10-11 M for simultaneous multi-component analysis. Finite-difference time-domain (FDTD) simulations confirm the enhancement mechanism. The NMSA6 substrate demonstrates remarkably low detection limits for BPA and melamine, facilitating the analysis of various hazardous substances. These findings highlight the substrate's potential for highly sensitive, label-free detection, presenting a viable tool for food safety monitoring.

Brain-targeting biomimetic disguised manganese dioxide nanoparticles via hybridization of tumor cell membrane and bacteria vesicles for synergistic chemotherapy/chemodynamic therapy of glioma

Glioma is a prevalent brain malignancy associated with poor prognosis. Although chemotherapy serves as the primary treatment for brain tumors, its effectiveness is hindered by the limited ability of drugs to traverse the blood-brain barrier (BBB) and the development of drug resistance linked to tumor hypoxia. Herein, we report the creation of hybrid camouflaged multifunctional nanovesicles comprising membranes of tumor C6 cells (mT) and bacterial outer membrane vesicles (OMVs) and co-loaded with manganese dioxide nanoparticles (MnO2 NPs) and doxorubicin (DOX) to synergistically enhance the chemotherapy/chemodynamic therapy (CDT) of glioma. Owing to OMV-mediated BBB penetration and mT-inherited tumor-homing properties, MnO2-DOX@mT/OMVs can penetrate the BBB and enhance the tumor cell-specific uptake of DOX via "proton sponge effect"-mediated lysosomal escape. This enhances the apoptotic effect induced by DOX and minimizing DOX-associated cardiotoxicity by facilitating the accumulation of DOX at the tumor site. Furthermore, the MnO2 NPs in MnO2-DOX@mT/OMVs can generate potent CDT by accelerating the Fenton-like reaction with DOX-generated H2O2 and achieving glutathione (GSH)-depletion-induced glutathione peroxidase 4 (GPX4) inactivation. These results showed that MnO2-DOX@mT/OMVs, designed for brain tumor targeting, significantly inhibited tumor growth and exhibited favorable biological safety. This innovative approach offers the augmentation of anticancer treatment efficacy via a potential combination of chemotherapy and CDT.

Rare-earth-free up and down-conversion dual-emission carbon dots for Cu2+ sensing

In this work, up- and down-conversion dual-emission CDs without rare-earth (UD D-CDs) were synthesized using RhB and 1,4-Diaminoanthraquinone as precursors. The synthesized UD D-CDs exhibited dual emissions at 496 and 580 nm under 260 and 865 nm excitation, respectively. The fluorescence emission mechanism, including contributions from carbon nuclei, surface states, molecular states, and internal defect states, was discussed through the separation and purification of UD D-CDs. Based on the interaction between UD D-CDs and copper ions (Cu2+), a dual-mode ratio fluorescence probe was developed to detect and quantify Cu2+. The up-conversion ratio fluorescent probe shows a linear range of 0.0500-15.0 μM, with a detection limit as low as 2.76 nM. This method has been successfully applied to detecting Cu2+ in human serum and has potential applications in biochemical analysis and biological imaging. The successful preparation of up-conversion fluorescent carbon dots without rare earth elements and the ability to perform low-damage detection in high-background biological samples provide a new approach to constructing non-rare earth up-conversion probes.

Near infrared-II photothermal-promoted multi-enzyme activities of gold-platinum to enhance catalytic therapy

Bimetallic nanozymes exhibited multi-enzyme activities, but glutathione (GSH) overexpression and weak catalytic capability restricted their catalytic therapeutic performance. Thus, this study developed a smart nanozyme (AuPt@MnO2) with a core-shell structure by coating manganese dioxide (MnO2) on the gold-platinum (AuPt) nanozyme (AuPt@MnO2) surface to enhance catalytic therapy. In this nanozyme, AuPt possessed triple-enzyme activities, i.e., catalase, peroxidase, and glucose oxidase, which greatly improved oxygen, hydroxyl radicals (·OH), and hydrogen peroxide generation, due to cyclic reactions. Moreover, GSH consumption degraded the MnO2 shell, which then enhanced ·OH generation of Mn2+. More importantly, the near-infrared-II (NIR-II) photothermal performance of AuPt@MnO2 with a high conversion efficiency of 38.7 % further promoted multi-enzyme activities and enhanced catalytic therapy. Moreover, combining NIR-II photothermal therapy and enhancing catalytic therapy decreased the cell viability to 10.8 %, and thereby, the tumors were cleared. Thus, the AuPt@MnO2 smart nanoplatform developed in this study exhibited NIR-II photothermal-promoted multi-enzyme activities and excellent antitumor efficacy, which will be promising for enhancing catalytic therapy.

Revealing oxygen effect on efficiency and stability of quantum dot photovoltaics

Colloidal quantum dot solar cells (CQDSCs) have received great attention in the development of scalable and stable photovoltaic devices. Despite the high power-conversion-efficiency (PCE) reported, stability investigations are still limited and the exact degradation mechanisms of CQDSCs remain unclear under different atmosphere conditions. In this study, the atmospheric influence on the ZnO electron transport layer material (ETL), halide-passivated lead sulfide CQDs (PbS-PbI2) photoactive layer material and 1,2-ethanedithiol-PbS CQDs (PbS-EDT) hole transport material on device stability in PbS CQDSCs is investigated. It was found that O2 had negligible influence on PbS-PbI2, but it did induce the increase in work function of ZnO ETL and PbS-EDT layers. Notably, the increase of the ZnO work function (WFZnO) induces the formation of interface barrier between ZnO and PbS-PbI2, leading to a deterioration in device efficiency. By further replacing ZnO ETL with SnO2, a multi-interface collaborative CQDSC was constructed to realize the PCE with high stability. This study identifies the efficiency evolution that is inherent in CQDSCs under different atmospheric conditions.

Synergistic effect of Na doping and CoSe2 cocatalyst for enhanced photocatalytic hydrogen evolution performance of ZnIn2S4

Element doping has been demonstrated as a useful strategy to regulate the band gap and electronic structure of photocatalyst for improving photocatalytic activity. Herein, ZnIn2S4 (ZIS) nanosheets were doped with alkali metal ions (Li+, Na+ or K+) by a simple solution method. Experimental characterizations reveal that alkali metal ions doping reduce the band gap, raise the conduction band position, and improve surface hydrophilicity of ZIS. In addition, theoretical calculations show that Na doping increases the electron density at valence band maximum and surrounding S atom, which is conducive to produce more electrons and effective utilization of electrons, respectively. Benefited from above factors, Na-doped ZIS (Na-ZIS) shows the highest photocatalytic hydrogen evolution performance. Furthermore, CoSe2 cocatalyst is loaded on the surface of Na-ZIS (CS/Na-ZIS), which further improve the charge separation and prolong the lifetime of charges. As a result, the optimized CS/Na-ZIS shows a H2 evolution rate of 4525 μmol·g-1·h-1 with an apparent quantum efficiency of 27.5 % at 420 nm, which are much higher than that of pure ZIS. This study provides an in-depth understanding of the synergistic effect of Na doping and CoSe2 cocatalyst in ameliorating photocatalytic activity.

High-efficiency electrochemical nitrate reduction to ammonia via boron-doped hydroxyl oxide cobalt induced electron delocalization

Electrochemical nitrate reduction to ammonia is a promising alternative strategy for producing valuable ammonia. This prospective route, however, is subject to a slow electrocatalytic rate, which resulted from the weak adsorption and activation of intermediate species, and the low density electron cloud of active centers. To address this issue, we developed a novel approach by doping boron into metal hydroxyl oxides to adjust the electronic structure of active centers, and consequently, led a significant improvement in the Faraday efficiency upto approaching 100 %, as well as an impressive ammonia yield upto approximately 23 mg/h mgcat-1 at -0.6 V vs. reversible hydrogen electrode (RHE). Experimental data in mechanism demonstrate that the doped boron play a crucial role in modulating the local electronic environment surrounding the active sites Co. In situ Raman and FTIR spectra provide evidences that boron facilitates the formation of deoxidation and hydrogenation intermediates. Additionally, density functional theory (DFT) calculations support the notion that boron doping enhances the adsorption capability of intermediates, reduces the reaction barrier, and facilitates the desorption of NH3.

Engineering electronic structures and oxygen vacancies of manganese-doped nickel molybdate porous nanosheets for efficient oxygen evolution reaction

The design strategy of designing effective local electronic structures of active sites to improve the oxygen evolution reaction (OER) performance is the key to the success of sustainable alkaline water electrolysis processes. Herein, a series of manganese-doped nickel molybdate porous nanosheets with rich oxygen vacancies on the nickel foam (Mn-NiMoO4/NF PNSs) synthesized by the facile hydrothermal and following annealing routes are used as high-efficiency and robust catalysts towards OER. By virtue of unique nanosheets architectures, more exposed active site, rich oxygen vacancies, tailored electronic structures, and improved electrical conductivity induced by Mn incorporation, as predicted, the optimized Mn0.10-NiMoO4/NF PNSs catalyst exhibits superior the OER performance with a low overpotential of 211 mV at 10 mA‧cm-2, a small Tafel slope of 41.7 mV‧dec-1, and an excellent stability for 100 h operated at 100 mA‧cm-2 in 1.0 M KOH electrolyte. The in-situ Raman measurements reveal the surface dynamic reconstruction. Besides, the results of density functional theory (DFT) calculations unveil the reaction mechanism. This study provides an effective design strategy via Mn incorporation to synergistically engineer electronic structures and oxygen vacancies of metal oxides for efficiently boosting the OER performance.

High aspect ratio cellulose nanofibrils with low crystallinity for strong and tough films

Cellulose nanofibril (CNF) films with both high strength and high toughness are attractive for applications in energy, packaging, and flexible electronics. However, simultaneously achieving these mechanical properties remains a significant challenge. Herein, a multiscale structural optimization strategy is proposed to prepare high aspect ratio CNFs with reduced crystallinity for strong and tough films. Carboxymethylation coupled with mild mechanical disintegration is employed to modulate the multiscale structure of CNFs. The as-prepared CNFs feature an aspect ratio of >800 and a crystallinity of <60 %. The film prepared using CNFs with a high aspect ratio (~1100) and reduced crystallinity (~54 %) exhibits a tensile strength of 229.9 ± 9.9 MPa and toughness of 22.2 ± 1.4 MJ/m3. The underlying mechanism for balancing these mechanical properties is unveiled. The high aspect ratio of the CNFs facilitates the transfer and distribution of local stress, thus endowing the corresponding film with high strength and toughness. Moreover, the low crystallinity of the CNFs permits the movement of the cellulose chains in the amorphous regions, thereby dissipating energy and finally increasing the film toughness. This work introduces an innovative and straightforward method for producing strong and tough CNF films, paving the way for their broader applications.

Copper doped carbon dots modified bacterial cellulose with enhanced antibacterial and immune regulatory functions for accelerating wound healing

The microenvironment of wound healing is susceptible to bacterial infection, chronic inflammation, oxidative stress, and inadequate angiogenesis, requiring the development of innovative wound dressings with antibacterial, anti-inflammatory, antioxidant, and angiogenic capabilities. This research crafted a new multifunctional bacterial cellulose composite membrane infused with copper-doped carbon dots (BC/Cu(II)-RCDs). Findings validated the successful loading of copper-doped carbon dots onto the BC membrane via hydrogen bonding interactions. Compared to the pure BC membrane, the BC/Cu(II)-RCDs composite membrane exhibited significantly enhanced hydrophilicity, tensile properties, and thermal stability. Diverse in vitro assays demonstrated excellent biocompatibility and antibacterial activity of BC/Cu(II)-RCDs composite membranes, alongside their ability to expedite the inflammatory phase and stimulate angiogenesis. In vivo trials corroborated the membrane's ability to foster epithelial regeneration, collagen deposition, and tissue regrowth in full-thickness skin wounds in rats while also curbing inflammation in infected full-thickness skin wounds. More importantly, the treatment of the BC/Cu(II)-RCDs composite membrane may result in the activation of VEGF and MAPK signaling proteins, which are key players in cell migration, angiogenesis, and skin tissue development. In essence, the developed BC/Cu(II)-RCDs composite membrane shows promise for treating infected wounds and serves as a viable alternative material for medicinal bandages.

Ferrous sulfate remodels the properties of sodium alginate-based hydrogel and facilitates the healing of wound infection caused by MRSA

Frequent occurrence of wound infection caused by multiple-resistant bacteria (MRB) has posed a serious challenge to the current healthcare system relying on antibiotics. The development of novel antimicrobial materials with high safety and efficacy to heal wound infection is of great importance in combating this crisis. Herein, we prepared a promising antibacterial hydrogel by cross-linking ferrous ions (Fe2+) with the deprotonated carboxyl anion in sodium alginate (Na-ALG) to cure wound infections caused by methicillin-resistant Staphylococcus aureus (MRSA). Interestingly, ferrous-modified Na-ALG (Fe-ALG) hydrogel demonstrated better properties compared to the traditional Na-ALG-based hydrogels, including injectability, self-healing, appropriate fluidity, high-water retention, potent MRSA-killing efficacy, and excellent biocompatibility. Importantly, the addition of Fe2+ enhances the antibacterial efficacy of the Na-ALG hydrogel, enabling it to effectively eliminate MRSA and accelerate the healing of antibiotic-resistant bacterial-infected wounds in a remarkably short period (10 days). This modification not only facilitates wound closure and fur generation, but also mitigates systemic inflammation, thereby effectively impeding the spread of MRSA to the lungs. Taken together, Fe-ALG hydrogel is a promising therapeutic material for treating wound infections by Staphylococcus aureus, especially by antibiotic-resistant strains like MRSA.

Electric-field assisted cascade reactions to create alginate/carboxymethyl chitosan composite hydrogels with gradient architecture and reconfigurable mechanical properties

Rational designs of polysaccharide-based hydrogels with organ-like three-dimensional architecture provide a great possibility for addressing the shortages of allograft tissues and organs. However, spatial-temporal control over structure in bulk hydrogel and acquire satisfied mechanical properties remain an intrinsic challenge to achieve. Here, we show how electric-field assisted molecular self-assembly can be coupled to a directional reaction-diffusion (RD) process to produce macroscopic hydrogel in a controllable manner. The electrical energy input was not only to generate complex molecule gradients and initiate the molecular self-assembly, but also to guide/facilitate the RD processes for the gel rapid growth via a cascade construction interaction. The hydrogel mechanical properties can be tuned and enhanced by using an interpenetrating biopolymer network and multiple ionic crosslinkers, leading to a wide-range of mechanical modulus to match with biological organs or tissues. We demonstrate diverse 3D macroscopic hydrogels can be easily prepared via field-assisted directional reaction-diffusion and specific joint interactions. The humility-triggered dissipation of functional gradients and antibacterial performance confirm that the hydrogels can serve as an optically variable soft device for wound management. Therefore, this work provides a general approach toward the rational fabrication of soft hydrogels with controlled architectures and functionality for advanced biomedical systems.

Visualizing mitochondrial ATP fluctuations in single cells during photodynamic therapy by In-Situ SERS three-dimensional imaging

An ultrasensitive strategy for in-situ visual monitoring of ATP in a single living tumor cell during mitochondria-targeted photodynamic therapy (PDT) process with high spatiotemporal resolution was proposed using surface-enhanced Raman scattering (SERS) 3D imaging technique. The nanostructures consisting of Au-Ag2S Janus nanoparticles functionalized with both Au nanoparticles linked by a DNA chain and a mitochondrial-targeting peptide (JMDA NPs) were deliberately employed to target mitochondria. The JMDA NPs exhibit excellent SERS activity and remarkable antitumor activity. The quantization of ATP relies on the intensity of the SERS probes bonded to the DNA, which shows a strong correlation with the generated hot spot between the Janus and the Au. Consequently, spatiotemporally controlled monitoring of ATP in the mitochondria of single living cells during the PDT process was achieved. Additionally, the JMDA NPs demonstrated remarkable capability for mitochondria-targeted PDT, providing significant antitumor effects and superior therapeutic safety both in vitro and in vivo. Our work presents an effective JMDA NPs-based SERS imaging strategy for in-situ and real-time 3D visualization of intracellular ATP in living tumor cells during the mitochondria-targeted PDT process, which enables significant information on the time point of PDT treatment and is beneficial to precious PDT applications in tumor therapy.

Smart nanozymes coupled with dynamic magnet field and laser exposures for cancer therapy

Developing nanozymes for cancer therapy has attracted great attention from researchers. However, enzymes-loaded magnetic particles triggered by both a low-frequency vibrating magnetic field (VMF) and laser for inhibiting tumor growth have never been reported. Herein, we developed a magnetic nanozyme with 3D flower-like nanostructures for cancer therapy. Specifically, the flower-like nanozymes exposed to a VMF could efficiently damage the mitochondrial membrane and cell structure, and inhibit tumor growth through magneto-mechanical force. In parallel, magnetic nanozymes in a weak acid environment containing glucose could generate abundant hydrogen peroxide through glucose oxidase-catalyzed oxidation of glucose, and further significantly promote the Fenton reaction. Interestingly, both glucose oxidase- and Fenton-based catalytic reactions were significantly promoted by the VMF exposure. Flower-like magnetic nanospheres upon a near-infrared laser irradiation could also damage cancer cells and tumor tissues through photothermal effect. The cell-killing efficiency of magnetic nanozymes triggered by the VMF or laser significantly increased in comparison with that of nanozymes without exposures. Mouse tumors grown after injection with magnetic nanozymes was inhibited in a significant way or the tumors disappeared after exposure to a VMF and laser due to the synergistic effect of four major stimuli, viz., magneto-mechanical force, photothermal conversion, improved Fenton reaction, and intratumoral glucose consumption-based starvation effect. This is a great platform that may be suitable for treating many solid tumors.

Machine learning-driven shortening the screening process towards high-performance nitrogen reduction reaction electrocatalysts with four-step screening strategy

The urgent need to prepare clean energy by environmentally friendly and efficient methods, which has led to widespread attention on electrocatalytic nitrogen reduction reaction (NRR) for ammonia production. At present, single atom catalytic nitrogen reduction has become the earliest promising method for industrial production due to its high atomic utilization rate, high selectivity, high controllability, and high stability. However, how to quickly screen catalysts with high catalytic efficiency and selectivity in single-atom catalysts (SACs) remains a challenge. Herein, the 29 SACs are constructed from C6N2 nanosheets doped with transition metals (TM@C6N2), which are analyzed for stability, adsorption performance, NRR catalytic activity, electronic properties, and competitiveness using first-principles calculations. The results show that Mo@C6N2 and Re@C6N2 exhibit the most outstanding catalytic performances, with limiting potentials (UL) of -0.29 and -0.31 V, respectively, in the solvent model. Machine learning is used to derive descriptors from the intrinsic features to predict the free energy changes for the potential-determining step. The importance of features is calculated, with the first ionisation energy (IE1) being the most significant influencing factor. Based on the guidance of machine learning and considering that IE1 is related to the ability of metal atoms to donate electrons, a four-step screening strategy using the Integrated Crystal Orbital Hamilton Populations (ICOHP) to screen catalysts instead of the traditional five-step screening not only improves the screening efficiency but also obtains completely consistent screening results. This work presents a new approach to predicting the catalytic performance of SACs and provides new insights into the influence of intrinsic properties on catalytic activity.

Nano-photosensitizers with gallic acid-involved Fe-O-Cu "electronic storage station" bridging ligand-to-metal charge transfer for efficient catalytic theranostics

NH2-MIL-88B (Fe) (MOF) is a promising photocatalytic material for antitumor therapy because of its distinctive electronic structure. However, inadequate separation of photo-generated electrons and slow reaction rate in low/high-valence iron (Fe) cycles limit their clinical application. In the present study, "electronic storage station" as a ligand-to-metal charge transfer bridge bond was constructed to inhibit recombination of electron/hole under 650 nm laser irradiation. Cupric (Cu) ions and gallic acid (GA) were self-assembled into a MOF (denoted as CGMOF) to create an FeO(GA)Cu bridge bond. GA, characterized by robust electron delocalization and abundant electron-donating groups, significantly enhances electron transfer efficiency for photodynamic therapy (PDT). CGMOF can respond to endogenous glutathione and release cuprous ions, accelerating the iron ion/ferrous ion cycles for chemodynamic therapy (CDT). The released Fe species can serve as T2-weighted magnetic resonance imaging contrast. Extended X-ray absorption fine structure spectra confirmed the presence of GA-containing FeOCu bonds in CGMOF. Furthermore, a series of photo-electrochemical tests confirmed that the formation of FeO(GA)Cu bond prominently elevated the redox capacity and increased the carrier density of CGMOF by 2.74-fold compared to that of MOF. In addition, cinnamaldehyde was grafted onto CGMOF for tumor-responsive hydrogen peroxide self-supply. Concurrently, hyaluronic acid was surface-modified to achieve the targeted delivery of nano-photosensitizers. In summary, this study presents an innovative approach for engineering Fe-based metal-organic frameworks for synergetic PDT/CDT applications.

CaF2 nanoparticles enabling LiF-dominated solid electrolyte interphase for dendrite-free and ultra-stable lithium metal batteries

The uncontrollable growth of Li dendrites and severe interfacial parasitic reactions on the Li anode are the primary obstacles to the practical application of lithium (Li) metal batteries. Effective artificial solid electrolyte interphase is capable of regulating uniform Li deposition and isolateing Li from electrolyte, thereby eliminating parasitic reactions. Herein, we rationally design a uniform LiF-dominated solid electrolyte interphase through an in-situ reaction between CaF2 nanoparticles and the Li anode, which allows dendrite-free Li deposition and restrains interfacial deterioration. Accordingly, the protective Li electrode demonstrated exceptional stability, sustaining over 6000 h at a current density of 2 mA cm-2 in symmetric cells and attaining over 1000 cycles with a low capacity decay rate of 0.015 % per cycle in coupling with LiFePO4 cathodes.

Dynamic light scattering unveils stochastic degradation in large-pore mesoporous silica nanoparticles

Mesoporous Silica Nanoparticles (MSNs) have been increasingly investigated as versatile drug delivery carriers. A particular challenge for the systemic use of MSNs lies in the control of their degradation, which has not been fully understood until now. We implemented standard dynamic light scattering (DLS) experiments and introduced a novel DLS technique in a confocal volume to track the dynamics of large-pore MSN degradation in situ. This unique DLS technique, which involves a small observation volume, was chosen for its ability to count particle by particle during the degradation process, a method that has not been commonly used in nanoparticle research. The experiments were performed in different media compositions at low particle concentrations, below the silica solubility limit. MSNs with large conical pores were prepared and studied as they offer the possibility to incorporate and release large-sized biomolecules. Large-pore MSNs followed a singular degradation mechanism following a stochastic-like behavior, a finding that challenges the common idea that all nanoparticles (NPs) degrade similarly and homogeneously over time. We showed that some NPs are observed intact over a prolonged period while most other NPs have already vanished or been transformed into swollen NPs. Thus, a heterogeneous degradation process occurs, while the total concentration of NPs undergoes an exponential decay. These large conical pores MSNs will be utilized as reliable biomolecule nanocarriers by predicting the factors underlying the NP hydrolytic stability.

Withdrawn: Low ice adhesion on soft surfaces: Elasticity or lubrication effects?

This article has been withdrawn at the request of the author(s) and/or editor. The Publisher apologizes for any inconvenience this may cause. The full Elsevier Policy on Article Withdrawal can be found at https://www.elsevier.com/about/policies/article-withdrawal.

Hollow CoP-FeP cubes decorating carbon nanotubes heterostructural electrocatalyst for enhancing the bidirectional conversion of polysulfides in advanced lithium-sulfur batteries

The sluggish redox reaction kinetics and "shuttle effect" of lithium polysulfides (LPSs) impede the advancement of high-performance lithium-sulfur batteries (LSBs). Transition metal phosphides exhibit distinctive polarity, metallic properties, and tunable electron configuration, thereby demonstrating enhanced adsorption and electrocatalytic capabilities towards LPSs. Consequently, they are regarded as exceptional sulfur hosts for LSBs. Moreover, the introduction of a heterogeneous structure can enhance reaction kinetics and expedite the transport of electrons/ions. In this study, a composite of hollow CoP-FeP cubes with heterostructure modified carbon nanotube (CoFeP-CNTs) was fabricated and utilized as sulfur host in advanced LSBs. The presence of carbon nanotubes (CNTs) facilitates enhanced electron and Li+ transport. Meanwhile, the active sites within the heterogeneous interface of CoP-FeP suppress the "shuttle effect" and enhance the conversion kinetics of LPSs. Therefore, the CoFeP-CNTs/S electrode exhibited exceptional cycling stability and demonstrated a capacity attenuation of merely 0.051 % per cycle over 600 cycles at 1C. This study presents a highly effective tactic for synthesizing dual-acting transition metal phosphides with heterostructure, which will play a pivotal role in advancing the development of efficient LSBs.

Graphene-supported MN4 single-atom catalysts for multifunctional electrocatalysis enabled by axial Fe tetramer coordination

Multifunctional electrocatalysts for oxygen reduction reaction (ORR), oxygen evolution reaction (OER), and hydrogen evolution reaction (HER) are crucial for development of the key electrochemical energy storage and conversion devices, for which single-atom catalyst (SAC) has present great promises. Very recently, some experimental works showed that structurally well-defined ultra-small transition-metal clusters (such as Fe and Co tetramers, denoted as Fe4 and Co4, respectively), can efficiently modulate the catalytic behavior of SACs by axial coordination. Herein, taking the graphene-supported MN4 SACs as representatives, we theoretically explored the feasibility of realizing multifunctional SACs for ORR, OER and HER by this novel axial coordination engineering. Through extensive first-principles calculations, from 23 candidates, IrN4 decorated with Fe4 (IrN4/Fe4) is identified as the promising trifunctional catalyst with the theoretical overpotential of 0.43, 0.51 and 0.30 V for OER, ORR and HER, respectively. RhN4/Fe4 and CoN4/Fe4 are recognized as potential OER and ORR bifunctional catalysts. In addition, NiN4/Fe4 exhibits the best ORR activity with an overpotential of 0.30 V, far superior to the pristine NiN4 SAC (0.88 V). Electronic structure analyses reveal that the significantly enhanced ORR/OER activity can be ascribed to the orbital and charge redistribution of Ni/Ir active center, resulting from its electronic interaction with Fe4 cluster. This work could stimulate and guide the rational design of graphene-based multifunctional SACs realized by axial coordination of small TM clusters, and provide insights into the modulation mechanism.

Tailoring vinegar residue-derived all-carbon electrodes for efficient electrocatalytic carbon dioxide reduction to formate through heteroatom doping and defect enrichment

Electrocatalytic carbon dioxide reduction (ECO2R) to formate is the most technically and economically feasible approach to achieve electrochemical CO2 value addition. Here, a few-layer graphene is prepared from vinegar residue. Then a series of heteroatom-doped vertical graphene electrodes (X-rGO, X=P/S/N/B/, NS/NP/NB, NSP/NSB/NPB/NSPB) are prepared. The NS-rGO has improved ECO2R to formate selectivity (Faraday Efficiency (FEHCOO-) = 78.7 %) thanks to the synergistic effect between N and S. Carbon quantum dots (CQDs) are introduced into the electrode, the doped heteroatoms are further removed by high-temperature to form the defects-rich electrode (NS-CQDs-rGO-1100), which has better catalytic performance (FEHCOO-=90 %, stability over 10 h) with electrochemical double layer capacitance of 12.5 mF cm-2. The intrinsic effect of heteroatom doping and defects on the ECO2R activity of the electrodes are explored by density functional theory calculation. This work broadens the field of preparation of graphene and opens the door to the development of cost-effective electrocatalysts for efficient ECO2R.

Biomass-derived multiatom-doped carbon dots for water sensing based on excited state intraparticle proton transfer in organic solvents

The presence of trace water impurities in organic solvents can significantly influence chemical reactions and product quality; thus, the accurate detection of water content in these solvents is a critical requirement for industrial applications. Accordingly, an eco-friendly, effective, and economical sensor for detecting trace quantities of miscible water in organic solvents is required for industrial applications. In this study, we synthesized biomass-derived multi-atom-doped carbon dots (MACDs) as fluorescent probes and employed them for the detection of trace amounts of water impurities in several water-miscible organic solvents. The MACDs exhibited stable dual-color fluorescence emission under ultraviolet light irradiation and red and blue emissions in organic solvents and water. The fluorescence quantum yield was approximately 11 %, which indicates an excited intraparticle proton transfer response due to an increase in the water content within a wide response range from 0 % to 100 % (v/v) in organic solvents. The intensity of the red emission signal at 670 nm gradually decreased with an increase in the water content in the organic solvent. The MACDs could detect water with an instant response time of 55 s, a high sensitivity, and low limits of detection of 0.08 %, 1.36 %, 0.03 %, 0.04 %, 0.12 %, and 0.05 % (v/v) in ethanol, acetonitrile, dimethylformamide, methanol, isopropanol, and tetrahydrofuran, respectively. Hence, biomass-derived MACDs can serve as efficient and eco-friendly water sensors in organic solvents.

Dithiothreitol-functionalized perovskite-based visual sensing array capable of distinguishing food oils

At present, the combination of fingerprint recognition methods and environmentally friendly and economical analytical instruments is becoming increasingly important in the food industry. Herein, a dithiothreitol (DTT)-functionalized CsPbBr3-based colorimetric sensor array is developed for qualitatively differentiating multiple food oils. In this sensor array composition, two types of iodides (octadecylammonium iodide (ODAI) and ZnI2) are used as recognition elements, and CsPbBr3 is used as a signal probe for the sensor array. Different food oils oxidize iodides differently, resulting in different amounts of remaining iodides. Halogen ion exchange occurs between the remaining iodides and CsPbBr3, leading to different colors observed under ultraviolet light, enabling a unique fingerprint for each food oil. A total of five food oils exhibit their unique colorimetric array's response patterns and were successfully differentiated by linear discriminant analysis (LDA), realizing 100% classification accuracy.

Enhancing tumor endothelial permeability using MUC18-targeted gold nanorods and mild hyperthermia

The Enhanced Permeability and Retention (EPR) effect, an elevated accumulation of drugs and nanoparticles in tumors versus in normal tissues, is a widely used concept in the field of cancer therapy. It assumes that the vasculature of solid tumors would possess abnormal, leaky endothelial cell barriers, allowing easy access of intravenous-delivered drugs and nanoparticles to tumor regions. However, the EPR effect is not always effective owing to the heterogeneity of tumor endothelium over time, location, and species. Herein, we introduce a unique nanoparticle-based approach, using MUC18-targeted gold nanorods coupled with mild hyperthermia, to specifically enhance tumor endothelial permeability. This improves the efficacy of traditional cancer therapy including photothermal therapy and anticancer drug delivery by increasing the transport of photo-absorbers and drugs across the tumor endothelium. Using single cell imaging tools and classic analytical approaches in molecular biology, we demonstrate that MUC18-targeted gold nanorods and mild hyperthermia enlarge the intercellular gaps of tumor endothelium by inducing circumferential actin remodeling, stress fiber formation, and cell contraction of adjacent endothelial cells. Considering MUC18 is overexpressed on a variety of tumor endothelium and cancer cells, this approach paves a new avenue to improve the efficacy of cancer therapy by actively enhancing the tumor endothelial permeability.

Cu2S/C@NiMnCe-layered double hydroxide with core-shell rods array structure as the cathode for high performance supercapacitors

The selection of highly efficient materials and the construction of advantageous structures are essential for realizing high-performance electrode materials. In this paper, electrode material Cu2S/C@NiMnCe-LDH/CF with excellent morphology and high performance has been successfully designed and prepared by simple hydrothermal and calcination techniques. First, ZIF-67 is loaded on the outer layer of Cu2S rods to obtain core-shell structured Cu2S@ZIF-67 rods, whose ZIF-67 MOF shell is carbonized to obtain Cu2S@C rods. Then, NiMnCe-LDH are epitaxially loaded on the outer layer of Cu2S@C to obtain Cu2S/C@NiMnCe-LDH rods. At a current density of 2 mA cm-2, Cu2S/C@NiMnCe-LDH/CF exhibits an area capacitance of 5176.4 mF cm-2. The mass capacitance and the energy density of the Cu2S/C@NiMnCe-LDH/CF//AC asymmetric supercapacitor (ASC) reach 150.82F g-1 at a sweep rate of 0.8 A/g and 53.62 Wh kg-1 at a power density of 639.99 W kg-1, respectively. Meanwhile, after 8000 electrochemical cycles, the specific capacitance of Cu2S/C@NiMnCe-LDH/CF//AC still has a retention rate of 86.32 %, which proves its excellent cycling stability. These results demonstrate a new strategy for the preparation of novel core-shell structured Cu2S/C@NiMnCe-LDH/CF nanocomposite material for electrode materials of energy storage devices with superb performance.

Dual-crosslinked reduced graphene oxide/polyimide aerogels possessing regulable superelasticity, fatigue resistance, and rigidity for thermal insulation and flame retardant protection in harsh conditions

Polyimide (PI) aerogels have various applications in aerospace, national defense, military industry, and rail transit equipment. This paper reports a series of ultra-lightweight, high elasticity, high strength, low thermal conductivity, and high flame retardant rGO/PI nanocomposite aerogels prepared by the ice templating method. The effects of freezing processes (unidirectional freezing and random freezing), chemical composition, and environmental temperature (-196-200 °C) on the morphology, mechanical, and thermal properties of the aerogels were systematically studied. The results indicated that unidirectional aerogels exhibit anisotropic mechanical properties and thermal performance. Compression in the horizontal direction showed high elasticity, high fatigue resistance, and superior thermal insulation. Meanwhile, in the vertical direction, it demonstrated high strength (PI-G-9 reaching 14 MPa). After 10,000 cycles of compression in the horizontal direction (at 50 % strain), the unidirectional PI-G-5 aerogel still retains 90.32 % height retention, and 78.5 % stress retention, and exhibited a low stable energy loss coefficient (22.11 %). It also possessed a low thermal conductivity (32.8 mW m-1 K-1) and demonstrated good thermal insulation performance by sustaining at 200 °C for 30 min. Interestingly, the elasticity of the aerogels was enhanced with decreasing temperatures, achieving a height recovery rate of up to 100 % when compressed in liquid nitrogen. More importantly, the rGO/PI aerogels could be utilized over a wide temperature range (-196-200 °C) and had a high limiting oxygen index (LOI) ranging from 43.3 to 48.1 %. Therefore, this work may provide a viable approach for designing thermal insulation and flame-retardant protective materials with excellent mechanical properties that are suitable for harsh environments.

Fabrication of edible nanocellulose chitosan bi-component film based on a novel "swell-permeate" approach

The fabrication of multi-component film with colloidal particles could be inconvenient. A novel "swell-permeate" (SP) strategy was proposed to form homogeneous multi-component films. The SP strategy allows colloidal particles to fit into the polymer network by stretching the polymer chains assisted by water. We demonstrated the strategy by creating films with polysaccharide substrates as β-cyclodextrin grafted chitosan (CS) with nanocellulose. The addition of nanocellulose significantly increased the mechanical properties and the barrier performance of the films. The size of nanocellulose particles in affecting mechanical properties was investigated by applying different length of cellulose nanocrystal (CNC), the longer of which, due to denser physical entanglements, showed a better increase to the film in the elastic modulus and tensile strength to 4.54-fold and 5.71-fold, respectively. The films were also loaded with ethyl-p-coumarate (EpCA) and had an enhanced performance in anti-microbial for Altenaria alternata, Salmonella typhi, and Escherichia coli. The anti-oxidative property was increased as well, and both effects were valid both in vitro and in ready-to-eat apples. The strategy provides a practical and convenient method for fabricating colloidal particle containing films, and the novel idea of "swell-permeate" is potentially regarded as a new solution to the challenge of ready-to-eat food quality maintenance.

Starch/ionic liquid/hydrophobic association hydrogel with high stretchability, fatigue resistance, self-recovery and conductivity for sensitive wireless wearable sensors

Conductive hydrogels have been widely used in wearable electronics due to their flexible, conductive and adjustable properties. With ever-growing demand for sustainable and biocompatible sensing materials, biopolymer-based hydrogels have drawn significant attention. Among them, starch-based hydrogels have a great potential for wearable electronics. However, it remains challenging to develop multifunctional starch-based hydrogels with high stretchability, good conductivity, excellent durability and high sensitivity. Herein, amylopectin and ionic liquid were introduced into a hydrophobic association hydrogel to endow it with versatility. Benefiting from the synergistic effect of amylopectin and ionic liquid, the hydrogel exhibited excellent mechanical properties (the elongation of 2540 % with a Young's modulus of 12.0 kPa and a toughness of 1.3 MJ·m-3), self-recovery, good electrical properties (a conductivity of 1.8 S·m-1 and electrical self-healing), high sensitivity (gauge factor up to 26.85) and excellent durability (5850 cycles). The above properties of the hydrogel were closely correlated to its internal structure from hydrophobic association, H-bonding and electrostatic interaction, and can be regulated by changing the component contents. A wireless wearable sensor based on the hydrogel realized accurate and stable monitoring of joint motions and expression changes. This work demonstrates a kind of promising biopolymer-based materials as candidates for high-performance flexible wearable sensors.

Gas evolution in self-extinguishing and insulative nanopolysaccharide-based hybrid foams

Lightweight, energy-efficient materials in building construction typically include polymeric and composite foams. However, these materials pose significant fire hazards due to their high combustibility and toxic gas emissions, including carbon monoxide and hydrogen cyanide. This study delves into the latter aspects by comparing hybrid systems based on nanofiber-reinforced silica-based Pickering foams with a synthetic reference (polyurethane foams). The extent and dynamics of fire retardancy and toxic gas evolution were assessed, and the results revealed the benefits of combining the thermal insulation of silica with the structural strength of biobased nanofibers, the latter of which included anionic and phosphorylated cellulose as well as chitin nanofibers. We demonstrate that the nanofiber-reinforced silica-based Pickering foams are thermal insulative and provide both fire safety and energy efficiency. The results set the basis for the practical design of hybrid foams to advance environmental sustainability goals by reducing energy consumption in built environments.

In-situ nanozyme catalytic amplification coupled with a universal antibody orientation strategy based electrochemical immunosensor for AD-related biomarker

An in-situ nanozyme signal tag combined with a DNA-mediated universal antibody-oriented strategy was proposed to establish a high-performance immunosensing platform for Alzheimer's disease (AD)-related biomarker detection. Briefly, a Zr-based metal-organic framework (MOF) with peroxidase (POD)-like activity was synthesized to encapsulating the electroactive molecule methylene blue (MB), and subsequently modified with a layer of gold nanoparticles on its surface. This led to the creation of double POD-like activity nanozymes surrounding the MB molecule to form a nanozyme signal tag. A large number of hydroxyl radicals were generated by the nanozyme signal tag with the help of H2O2, which catalyzed MB molecules in situ to achieve efficient signal amplification. Subsequently, a DNA-aptamer-mediated universal antibody-oriented strategy was proposed to enhance the binding efficiency for the antigen (target). Meanwhile, a poly adenine was incorporated at the end of the aptamer, facilitating binding to the gold electrode and providing anti-fouling properties due to the hydrophilicity of the phosphate group. Under optimal conditions, this platform was successfully employed for highly sensitive detection of AD-associated tau protein and BACE1, achieving limits of detection with concentrations of 3.34 fg/mL and 1.67 fg/mL, respectively. It is worth mentioning that in the tau immunosensing mode, 20 clinical samples from volunteers of varying ages were analyzed, revealing significantly higher tau expression levels in the blood samples of elderly volunteers compared to young volunteers. This suggests that the developed strategy holds great promise for early AD diagnosis.

A novel three-dimensional porous Ag/TiO2 hybrid aerogels with high dense hot spot as effective SERS substrate for ultrasensitive detection

This research focuses on preparing a series of new TiO2/Ag hybrid aerogels with varying TiO2 contents, and demonstrates their application as ultrasensitive SERS substrates. The synthesized TiO2/Ag hybrid aerogels exhibited excellent SERS behavior when detecting 4-Mercaptobenzoic acid (4-MBA), and the calculated SERS enhancement factor (EF) was 6.34 × 106. 3D structured aerogels can create more hot spots and adsorption sites, and multiple interband chemical transfer (CT) pathways emerged and enhanced CT efficiency because of the large number of surface oxygen vacancies of meso-TiO2 NPs. Therefore, the synergy of electromagnetic field enhancement and chemical enhancement leads to SERS enhancement. In addition, the composite SERS substrate has high sensitivity, and the detection limit of adsorbed 4-MBA probe molecules reaches 10-11 M. Furthermore, the TiO2/Ag hybrid aerogels demonstrate good reproducibility with minimal standard deviation in terms of SERS signals. In addition, even after standing for 6 months, there is almost no attenuation in the SERS signal intensity, which highlights the excellent stability of this substrate. Therefore, these highly sensitive TiO2/Ag hybrid aerogels SERS substrates have important practical value in environmental monitoring, medical inspection and food supervision.

A surface-enhanced infrared absorption spectroscopy (SEIRA) multivariate approach for atrazine detection

A green, fast and effective multivariate method for the determination of atrazine (ATZ) was developed using conventional infrared equipment furnished with an attenuated total reflectance module (ATR-IR), providing limit of detection (LOD) and limit of quantification (LOQ) in the ranges from 1.9 to 4.6 µg/mL and from 5.6 to 14 µg/mL, respectively. Furthermore, the surface-enhanced infrared absorption (SEIRA) approach was investigated to improve the sensitivity of the measurements and detect ATZ at low concentrations, addressing the compatibility with reference methods. To this end, a substrate formed by silver selenide quantum dots stabilized with mercaptopropionic acid (Ag2Se/MPA), synthesized in aqueous medium by an one-pot synthesis, was used. The spectral data were investigated by univariate and multivariate calibrations, allowing to calculate the enhancement factor (EF) and the multivariate enhancement factor (MEF), respectively. The SEIRA strategy proved to be able to enhance the atrazine signal up to 86-fold, allowing the detection of ATZ at concentrations as low as 0.001 µg/mL.

Simultaneous detection of multiple microRNAs based on fluorescence resonance energy transfer under a single excitation wavelength

MicroRNAs (miRNAs) play a key role in physiological processes, and their dysregulation is closely related to various human diseases. Simultaneous detection of multiple miRNAs is pivotal to cancer diagnosis at an early stage. However, most multicomponent analyses generally involve multiple excitation wavelengths, which are complicated and often challenging to simultaneously acquire multiple detection signals. In this study, a convenient and sensitive sensor was developed to simultaneously detection of multiple miRNAs under a single excitation wavelength through the fluorescence resonance energy transfer between the carbon dots (CDs)/quantum dots (QDs) and graphene oxide (GO). A hybridization chain reaction (HCR) was triggered by miRNA-141 and miRNA-21, resulting in the high sensitivity with a limit of detection (LOD) of 50 pM (3σ/k) for miRNA-141 and 60 pM (3σ/k) for miRNA-21. This simultaneous assay also showed excellent specificity discrimination against the mismatch. Furthermore, our proposed method successfully detected miRNA-21 and miRNA-141 in human serum samples at a same time, indicating its diagnostic potential in a clinical setting.

Thiol-polyethylene glycol-folic acid (HS-PEG-FA) induced aggregation of Au@Ag nanoparticles: A SERS and extinction UV-Vis spectroscopy combined study

Plasmonic colloidal nanoparticles (NPs) functionalised with polymers are widely employed in diverse applications, offering advantages demonstrated over non-functionalised NPs such as enhanced colloidal stability or increased biocompatibility. However, functionalisation with polymers does not always increase the stability of the colloidal system. This work explores the intricate relationship between the functionalisation of plasmonic core@shell Au@Ag nanoparticles (NPs) with thiol-polyethylene glycol-folic acid (HS-PEG-FA) polymer chains and the resulting stability and spectral characteristics of Surface-Enhanced Raman Scattering (SERS) nanotags based on these NPs. We demonstrate that varying levels of HS-PEG-FA grafting influence nanotag stability, with a low level of grafting causing aggregation and subsequently affecting the spectral signature of Raman-reporter molecules attached to the surface of the NP. Electrostatic destabilisation is identified as the primary mechanism driving aggregation, impacting the SERS spectrum of Malachite Green isothiocyanate (MGITC) whose spectral shape is different between the aggregated and non-aggregated NPs. The findings provide valuable insights into NPs stability under different conditions, offering essential considerations for the design and optimisation of SERS nanotags in bio-analytical applications, particularly those involving data processing based on spectral shape, such as in multiplex approaches where experimental spectra are decomposed with several reference components.

Study of two-dimensional information writing, reading and error correction at micro/nanoscale based on gold nanosphere arrays

Surface plasmon driven photocatalytic reactions have great potential for information encryption as well as information security. In this paper, explored the detection concentrations of dye molecule Rhodamine6G (R6G) on three substrates, where complete original Raman spectra signals were still obtained at a concentration of 10-8 M. Utilized photosensitive molecules to investigate the photocatalytic characteristics of 4-nitrobenzenethiol (4-NBT) on three substrates. Excitation light at a wavelength of 633 nm enables local photocatalytic for information signals writing, while 785 nm wavelength excitation light combined with two-dimensional Mapping technology is used for information signal reading. Read information signals are often prone to reading errors due to their own lack of resolution or strong interference from back bottom signals, so error correction processing of information signals is essential. Through comparative exploration, it is found that the ratio method can obtain high-precision and high-resolution information signals, and the interference of the background signals were well suppressed. Leveraging the advantages of Raman fingerprint spectra at the micro/nanoscale, it solves the challenge of incomplete information signals presentation at smaller scales. Additionally, through error correction processing of the information signals, high precision and high-resolution information signals are obtained.

Triplex hairpin oligosensor for ultrasensitive determination of miRNA-155 as a cancer marker using Si quantum dots and Au nanoparticles

In this study, a new triplex hairpin oligosensor was developed for the determination of a breast cancer biomarker using silicon quantum dots (Si QD) (λex = 370 nm, λem = 482 nm) as donor and gold nanoparticles (GNP) as an acceptor in a FRET (fluorescence resonance energy transfer) mechanism. In the triplex hairpin oligosensor, a triplex-forming oligonucleotide (TFO) labeled with Si QD and a single-strand DNA labeled with GNP form a hairpin shape with a triplex structure at the hairpin stem. In a turn-on mechanism, the triplex hairpin stem is opened in the presence of sequence-specific miRNA-155 which leads to the release of the Si QD-labeled TFO probe and recovery of the fluorescence signal. About 80 % of the fluorescence intensity of the Si QD-TFO is quenched in the triplex hairpin structure of the oligosensor and in the presence of 800 pM miRNA-155, the fluorescence signal recovered to 57.7 % of its initial value. The LOD of about 10 pM was obtained. The designed triplex-based biosensor can discriminate concentrations of breast cancer biomarkers with high selectivity.

Dimeric and monomeric conformation of SARS-CoV-2 main protease: New technical approaches based on IR radiation

The main proteases Mpro are a group of highly conserved cysteine hydrolases in β-coronaviruses. They have been demonstrated to play an unavoidable role in viral replication, and consequently they have been suggested as key targets for treating coronavirus-caused infectious diseases, mainly from the COVID-19 epidemic. Since the most functional form for Mpro enzymatic activity is associated to its homodimer, compounds inhibiting dimerization should also inhibit catalytic activity. We show how PIR-SEIRA (Plasmonic Internal Reflection-Surface Enhanced InfraRed Absorption) spectroscopy can be a noteworthy technique to study proteins subtle structural variations associated to inhibitor binding. Nanoantennas arrays can selectively confine and enhance electromagnetic field via localized plasmonic resonances, thus promoting ultrasensitive detection of biomolecules in close proximity of nanoantenna arrays and enabling the effective investigation of protein monolayers. By adopting this approach, reflection measurements conducted under back illumination of nanoantennas allow to probe anchored protein monolayers, with minimum contribution of environmental buffer molecules. PIR-SEIRA spectroscopy on Mpro was carried out by ad hoc designed devices, resonating in the spectral region of Amide I and Amide II bands. We evaluated here the structure of anchored monomers and dimers in different buffered environment and in presence of a newly designed Mpro inhibitor. Experimental results show that dimerization is not associated to relevant backbone rearrangements of the protein at secondary structure level, and even if the compound inhibits the dimerization, it is not effective at breaking preformed dimers.

Surface control in the adsorption of tebuthiuron on modified silver surfaces tracked by surface-enhanced Raman scattering spectroscopy

The vibrational assignment of the Raman and surface-enhanced Raman scattering (SERS) spectra of the herbicide tebuthiuron (TBH) was accomplished, which allowed unprecedented propositions for adsorption geometries on the surface of silver nanoparticles (AgNP). Ascribed SERS features allowed suggesting that the adsorption occurred through nitrogen atoms of thiadiazole group, since intense band shift assigned to ring mode was marking of the coordination with the metallic surface. AgNP were treated with different surface modifiers that leaded to substantial changes in TBH adsorption geometries. Spectral changes, as the enhancement of out-of-plane ring modes, were indicative of the presence of tilted thiadiazole geometries in relation to the silver surface. Density Functional Theory (DFT) calculations from TBH molecules, in isolation and in interaction with ten-atom cluster of silver leaded to obtain theoretical spectra that gave support to interpret experimental Raman and SERS spectra.

Ratiometric fluorescence and smartphone-assisted sensing platform based on dual-emission carbon dots for brilliant blue detection

In this study, an innovative ratiometric fluorescence and smartphone-assisted visual sensing platform based on blue-yellow dual-emission carbon dots (BY-CDs) was constructed for the first time to determine brilliant blue. The BY-CDs was synthesized via a facile one-step hydrothermal process involving propyl gallate and o-phenylenediamine. The synthesized BY-CDs exhibit favorable water solubility and exceptional fluorescence stability. Under excitation at 370 nm, BY-CDs show two distinguishable fluorescence emission bands (458 and 558 nm). Upon addition of brilliant blue, the fluorescence intensity at 558 nm exhibited a significant quenching effect attributed to fluorescence resonance energy transfer (FRET), while the fluorescence intensity at 458 nm was basically unchanged. The prepared BY-CDs can effectively serve as a ratiometric nanosensor for determining brilliant blue with the ratio of fluorescence intensities at 458 and 558 nm (F458/F558) as response signal. In addition, the developed ratiometric fluorescence sensor exhibits a noticeable alteration in color from yellow to green under UV light with a wavelength of 365 nm upon addition of varying concentrations of brilliant blue, which provides the possibility of visual detection of brilliant blue by a smartphone application. Finally, the BY-CDs based dual-mode sensing platform successfully detected brilliant blue in actual food samples and achieved a desirable recovery rate. This study highlights the merits of fast, convenient, economical, real-time, visual, high accuracy, excellent precision, good selectivity and high sensitivity for brilliant blue detection, and paves new paths for the monitoring of brilliant blue in real samples.

Developing a label-free full-range highly selective pH nanobiosensor using a novel high quantum yield pH-responsive activated-protein-protected gold nanocluster prepared by a novel ultrasonication-protein-assisted procedure

A novel, label-free, ultra-selective, reproducible, and reversible pH nanobiosensor was developed for analyzing biofluids, food samples, and real water media utilizing a novel activated-protein-protected gold nanocluster with an ultra-narrow emission band, termed as ABSA-AuNCs. The ABSA-AuNCs were synthesized via a novel ultrasonication-protein-assisted procedure, for the first time, using activated bovine serum albumin as both capping and reducing agents. The ABSA-AuNCs revealed a highly narrow symmetric emission spectrum (λmax = 330.0 nm upon excitation at 312-317 nm), and a highly narrow size distribution of 2.9-3.7 nm along with an enhanced quantum yield of 28.3 %. At present, with a full width at half maximum (FWHM) of 14.0 nm, ABSA-AuNCs have the narrowest bandwidth of fluorescent nanomaterials reported to date. The ABSA-AuNCs were characterized for their stability, size, morphology, crystallinity, structural, and optical properties. The ABSA-AuNCs were found to be appropriate for constructing a label-free ultraselective pH nanobiosensor. A linear range over 2.0-11.0, fast response time of less than 5 s, and long-term stability of 99.7 % after 500 min were achieved. The %RSD for repeatability, intra-day reproducibility, and inter-day reproducibility was found to be 1.4 %, 1.7 %, and 2.3 %, in order, to reveal high repeatable and reproducible results. The selectivity of the pH biosensor was evaluated upon the addition of different interferents, indicating an excellent pH selectivity for the ABSA-AuNCs. Real sample analysis proved the feasibility of the ABSA-AuNCs for accurate, precise, and reliable pH sensing in biofluids (undiluted blood and urine), a variety of food samples, and several real water samples.

J-aggregates of strong electron-donating groups linked Aza-BODIPY adjusting by polypeptide for NIR-II phototheranostics

The commonly employed strategies for engineering second near-infrared (NIR-II) organic phototheranostic agents are based on expanding conjugated backbone length, strengthening donor (D)-acceptor (A) effect, or forming J-aggregates. We constructed the D-A-D' structure by incorporating strong electron-donating methoxy and tetraphenylethene (TPE) moieties on the electron-deficient Aza-BODIPY core, and simultaneously expanded the π-conjugation effect by introducing thiophene groups, to obtain a dye BDP-TPE. Next, the nanoparticles P-TPE were prepared via the assembly of BDP-TPE with amphiphilic polypeptides (mPEG2000-P(Asp)10), and successfully constructed the J-aggregates. The obtained P-TPE exhibited strong absorption and fluorescence with maxima at 808 and 1018 nm, respectively, with a conspicuous absolute quantum yield of 0.241 %. Moreover, P-TPE also showed excellent biocompatibility, and high photothermal conversion efficiency of 61.15 %, and excellent resistance to pH, long-term storage, and photobleaching. In vitro and in vivo experiments revealed that P-TPE exhibited good biocompatibility and effectively achieved NIR-II fluorescence imaging-guided PTT with complete tumor ablation under 808 nm laser irradiation. These results provided good evidence for the use of P-TPE as a NIR-II fluorescence imaging-guided PTT therapeutic agent in vivo.