Novel fluorogenic substrates for assaying retroviral proteases by resonance energy transfer

Evaluation of "norpeptides" as potential inhibitors of HIV-proteases

Peptide mimics of substrates for HIV-proteases were prepared. These "norpeptides" are identical to a fragment of the HIV-polyprotein except that a crucial scissile bond was deleted, and an alpha,beta-disubstituted amino acid spans the P1 and P1 site. Thus all four stereoisomers of Leu psi[]Ala (i.e. H2NCH(CH2iPr)CH(Me)CO2H, 1) were incorporated into Ac-Ala-Arg-Val-Leu psi[]Ala-Glu-Ala-NH2 (all other residues being L-amino acids), and tested with respect to inhibition of HIV-1 and HIV-2 proteases.

Use of steady state kinetic methods to elucidate the kinetic and chemical mechanisms of retroviral proteases

Despite the current plethora of structural data of HIV-1 protease and the availability of potent inhibitors, whose structures are based in part on the presumed mechanism of action of this enzyme, our actual understanding of its chemical mechanism has been until now based largely on the precedents of the mammalian and fungal aspartic proteases and static three-dimensional data. The available steady state kinetic data of the protease, as reviewed here, constitute a first step in a detailed description of the mechanism of the enzyme to complement the structural data.

Synthetic approaches to continuous assays of retroviral proteases

This chapter has described a number of approaches for continuous assay of retroviral proteases using either chromogenic or fluorogenic synthetic substrates. The significant progress in this area has been catalyzed by the intense interest in HIV protease as a therapeutic target, but these versatile methods will be used widely in future for studies of many other proteases.

Assay methods for retroviral proteases

A variety of assay methods for retroviral proteases have been developed in response to different experimental requirements, such as initial identification of a protease, subsequent enzymatic characterization, and high-capacity automated screening of potential inhibitors. This chapter has reviewed a number of these methods above; most have been closely tailored to match specific experimental requirements, and some of them are described in greater detail in other chapters in this volume. They include analysis of polyprotein cleavage using SDS-PAGE, analysis of the determinants of substrate cleavage using either chromogenic peptides or reversed-phase HPLC for product separation after cleavage of unmodified peptides, and the design and utilization of quenched fluoregenic peptides for use in continuous assay.

Stability of dimeric retroviral proteases

The determination of dimer stabilities for the retroviral proteases has proved more challenging than anticipated, but it is a tractable problem when careful attention is made to potential interferences. For investigations of retroviral proteases not yet characterized, the fundamentally rigorous sedimentation equilibrium and other biophysical techniques may yet provide useful Kd values. They are preferable to the indirect methods emphasized in this chapter but nevertheless should be coupled with basic considerations such as recovery of activity at the end of an experiment and the relevance of values obtained to other situations. In the likely event that nanomolar Kd values are encountered in new investigations, the assay techniques provide the most readily available methods for many laboratories. Because these methods are sensitive to anything that affects enzyme activity, the use of complementary methods to verify dimerization constants is imperative. Inactivating reactions not due to monomer formation should be explored, and the potential impact of those reactions on the constants being measured should be estimated. Most of the Kd and dimerization rate data available for retroviral proteases are obtained with the HIV-1 protease, with each investigator choosing methods and solvent conditions different from the others. The confusing diversity of results should be the impetus for a direct comparison of methods for the identification of the sources of differences. If more comprehensive and rigorous measures of the kinetics and thermodynamics of subunit aggregation are obtained, they might be coupled with the large volume of detailed structural data accumulating for this class of protein to provide insights into more general problems of protein-folding chemistry.

Rapid, sensitive and efficient HPLC assays for HIV-1 proteinase

The proteinase encoded by human immunodeficiency virus type 1 (HIV-1) cleaves peptide substrates of sequences derived from processing sites in HIV-1 gag-pol polypeptide. Based on this cleavage, assays that utilize HPLC to measure activity of HIV-1 proteinase are reported herein. In the assay first described, a baseline separation of unlabeled substrate and products is achieved with a run time of 10 min and UV detection. Enzyme concentrations as low as 1 nM, which is the lowest reported for an assay employing underivatized peptide substrate, are attained. Even more powerful, versatile and sensitive, a second method that takes advantage of a peptide substrate labeled at its N-terminus with the fluorescein derivative is described as well. Because of the fluorescein label, this method offers several superior features, including very fast analysis of substrate and product in less than 3 min and fluorescence detection which provides essentially total freedom from interference. Synthesis of fluorescein-labeled peptide substrate is accomplished by solid-phase peptide synthesis.

Pseudo-symmetrical difluoroketones. Highly potent and specific inhibitors of HIV-1 protease

A series of novel, pseudo-symmetrical difluoroketones which are highly potent inhibitors of the HIV-1 protease (IC50 = 1.55-0.02 nM) were synthesized. These compounds also possess good antiviral activity by inhibition of the cytopathic effect of HIV-13B in MT-4 cells in vitro.

Allelic discrimination by nick-translation PCR with fluorogenic probes

Nick-translation PCR was performed with fluorogenic probes. Two probes were used: one complementary to a sequence containing the F508 codon of the normal human cystic fibrosis (CF) gene (wt DNA) and one complementary to a sequence containing the delta F508 three base pair deletion (mut DNA). Each probe contained a unique and spectrally resolvable fluorescent indicator dye at the 5' end and a common quencher dye attached to the seventh nucleotide from the 5' end. The F508/delta F508 site was located between the indicator and quencher. The probes were added at the start of a PCR containing mut DNA, wt DNA or heterozygous DNA and were degraded during thermal cycling. Although both probes were degraded, each probe generated fluorescence from its indicator dye only when the sequence between the indicator and quencher dyes was perfectly complementary to target. The identify of the target DNA could be determined from the post-PCR fluorescence emission spectrum.

Sensitive, hydrosoluble, macromolecular fluorogenic substrates for human immunodeficiency virus 1 proteinase

Hydrosoluble macromolecular fluorogenic substrates specific for the human immunodeficiency virus 1 (HIV-1) proteinase have been prepared. The fluoresceinyl peptide Ftc-epsilon-Ahx-Ser-Phe-Asn-Phe-Pro-Gln-Ile-Thr-(Gly)n, corresponding to the first cleavage site of HIV-1 gag-pol native precursor was linked to a water-soluble neutral (Lys)n derivative. The epsilon-aminohexanoyl residue (epsilon-Ahx) and the glycyl sequence were added in order to improve the stability of the substrate and the accessibility of the cleavage site to the HIV-1 proteinase respectively. This macro-molecular peptidic-substrate conjugate is significantly more water-soluble than the free peptide itself on a substrate molar concentration basis. The assay is based on the quantitative precipitation of the polymeric material by adding propan-2-ol whereas the fluorescent peptide moiety released upon proteolysis remains soluble in the supernatant. The proteinase activity is assessed by measuring the fluorescence of the supernatant. This assay allows the detection of a few fmol of HIV-1 proteinase, even in the presence of cell culture media, plasma or cell lysate and it gives accurate results within a large proteinase concentration range. The hydrosoluble macromolecular substrate is also suitable for determining the HIV-1 proteinase activity using 96-well microplates, allowing us to test accurately and rapidly numerous enzyme samples and/or the potency of new proteinase inhibitors.

A symmetric inhibitor binds HIV-1 protease asymmetrically

Potential advantages of C2-symmetric inhibitors designed for the symmetric HIV-1 protease include high selectivity, potency, stability, and bioavailability. Pseudo-C2-symmetric monools and C2-symmetric diols, containing central hydroxymethylene and (R,R)-dihydroxyethylene moieties flanked by a variety of hydrophobic P1/P1' side chains, were studied as HIV-1 protease inhibitors. The monools and diols were synthesized in 8-10 steps from D-(+)-arabitol and D-(+)-mannitol, respectively. Monools with ethyl or isobutyl P1/P1' side chains were weak inhibitors of recombinant HIV-1 protease (Ki > 10 microM), while benzyl P1/P1' side chains afforded a moderately potent inhibitor (apparent Ki = 230 nM). Diols were 100-10,000x more potent than analogous monools, and a wider range of P1/P1' side chains led to potent inhibition. Both classes of compounds exhibited lower apparent Ki values under high-salt conditions. Surprisingly, monool and diol HIV-1 protease inhibitors were potent inhibitors of porcine pepsin, a prototypical asymmetric monomeric aspartic protease. These results were evaluated in the context of the pseudosymmetric structure of monomeric aspartic proteases and their evolutionary kinship with the retroviral proteases. The X-ray crystal structure of HIV-1 protease complexed with a symmetric diol was determined at 2.6 A. Contrary to expectations, the diol binds the protease asymmetrically and exhibits 2-fold disorder in the electron density map. Molecular dynamics simulations were conducted beginning with asymmetric and symmetric HIV-1 protease/inhibitor model complexes. A more stable trajectory resulted from the asymmetric complex, in agreement with the observed asymmetric binding mode. A simple four-point model was used to argue more generally that van der Waals and electrostatic force fields can commonly lead to an asymmetric association between symmetric molecules.

Synthesis of specific peptide substrates for HIV-1 proteinase

Two small peptide substrates for HIV-1 proteinase were synthesised. The sequences chosen were basically from that of the gag-pol protein, which is the natural substrate for the proteinase. To protect these peptides from the attack of exopeptidases, the N- and C-termini were suitably protected, which also makes these substrates specific to HIV-proteinase and eliminates the requirement for highly purified enzyme.

Effect of P2' substituents on kinetic constants for hydrolysis by cysteine proteinases

Intramolecularly quenched fluorogenic peptide substrates with the general sequence: DABCYL-Lys-Phe-Gly-Gly-Xxx-Ala-EDANS have been utilized to explore the effect of the hydrophobicity of amino acid side chains in the P2' position on the steady-state kinetic constants for papain catalyzed hydrolysis. The results demonstrate that subsite interactions between the enzyme and the peptide substrate modulate the enzyme specificity by slowing the release of the C-terminal product. This series of substrates can be used to characterize substrate specificity studies of other cysteine proteinases.

High-level expression and purification of mature HIV-1 protease in Escherichia coli under control of the araBAD promoter

A 1.3-kb segment of Escherichia coli DNA containing the regulatory gene, araC, and the promoter of the araBAD operon was amplified by the polymerase chain reaction (PCR) and cloned into pUC18, resulting in plasmid pKB130 that produced the alpha fragment of beta-galactosidase upon addition of L-arabinose (L-ara). A synthetic gene for human immunodeficiency virus (HIV)-1 preprotease was placed downstream of the ara-BAD promoter in pKB130 to create a translational fusion inducible by addition of L-ara. The fusion protein correctly autoprocessed in vivo to yield a mature 99-amino-acid HIV-1 protease, which was found predominantly in inclusion bodies. This material could be refolded to an active form, which was purified to homogeneity. A small fraction of the protease was expressed in vivo as a soluble active form, which allowed the monitoring of expression during fermentation by a rapid and simple whole cell assay employing an HIV-1 protease-specific fluorogenic substrate.

Application of a fluorogenic substrate in the assay of proteolytic activity and in the discovery of a potent inhibitor of Candida albicans aspartic proteinase

A fluorescent method for monitoring the activity of the secreted Candida carboxyl (aspartic) proteinase (EC 3.4.23.6) was developed using a fluorogenic substrate based on resonance energy transfer. The fluorescent assay was used to monitor proteinase production, purification, and inhibition. The Km for the fluorogenic substrate, 4-(4-dimethylaminophenylazo)benzoyl-gamma-aminobutyryl-Ile-His-Pro - Phe-His-Leu-Val-Ile-His-Thr- [5-(2-aminoethyl)amino]naphthalene-1-sulfonic acid, was found to be 4.3 microM at the optimum pH of 4.5. Reaction products were separated by reverse-phase high-performance liquid chromatography and identified by amino acid analysis or by 252Cf plasma desorption mass spectrometry. Cleavage of the fluorogenic substrate was between the histidine-threonine residues, releasing the fluorescent product, threonine-[5-(2-aminoethyl)amino]naphthalene-1-sulfonic acid. Proteolytic activity was expressed as nanomoles of fluorescent product released at 22 degrees C/60 min, pH 4.5, and the release of 0.9 nmol product was equivalent to one hemoglobin proteolytic unit (O.D.A700 increase of 0.100) produced at 37 degrees C/60 min, pH 3.5. The aspartic proteinase inhibitor pepstatin had an IC50 of 27 nM when tested in a dose-response study with the purified enzyme. The apparent Ki for pepstatis was 2.9 nM. Several synthetic inhibitors of the enzymes were identified with IC50's in the nanomolar range. The most potent compound, A70450, was characterized as a fast, tight-binding inhibitor having an IC50 of 1.3 nM and apparent Ki of 0.17 nM.

Intramolecularly quenched fluorogenic peptide substrates for human renin

Six intramolecularly quenched fluorogenic peptides related to the sequences Phe8 to His13, His6 to His13, and Tyr4 to His13 of the human angiotensinogen, containing o-aminobenzoyl (Abz) and ethylenediamine dinitrophenyl (EDDnp) groups at amino- and carboxyl-terminal amino acids residues, were synthesized by classical solution methods. The Leu-Val is the only bond of all obtained peptides that was hydrolyzed by human renin with different degrees of purity and was resistant to hydrolysis by pig renin and cathepsin D. The hydrolysis of Abz-His-Pro-Phe-His-Leu-Val-Ile-His-EDDnp by human renin was inhibited by a highly specific transition-state analog of angiotensinogen (IC50 = 7.8 x 10(-9) M), described by K. Iizuka et al. (1990, J. Med. Chem. 33, 2707-2714). Therefore, specific and sensitive substrates for the continuous assay of human renin in which as little as 70 microGU of human renin could be detected by Abz-Phe-His-Leu-Val-Ile-His-EDDnp were described. The optimal pHs of hydrolysis of the substrates were in the range 4 to 6.

A genetic system for studying the activity of a proteolytic enzyme

We describe a genetic system for monitoring the activity of a specific proteolytic enzyme by taking advantage of the properties of the yeast transcriptional activator GAL4. The GAL4 protein contains two separable and functionally essential domains: the amino-terminal DNA binding domain and the carboxyl-terminal transcriptional activating domain. We constructed two hybrid proteins by inserting between the DNA binding domain and the activation domain of GAL4 either (i) a self-cleaving protease (3C protease of a picornavirus, coxsackievirus B3) or (ii) a mutant form of the protease that is unable to cleave. We show that, although the hybrid protein containing the mutant protease activates transcription of GAL1-lacZ reporter gene, the hybrid protein bearing the wild-type protease is proteolytically cleaved and fails to activate transcription. Our approach to monitor the proteolytic activity could be used to develop simple genetic systems to study other proteases.

Design and implementation of a particle concentration fluorescence method for the detection of HIV-1 protease inhibitors

A critical step in the replicative cycle of the human immunodeficiency virus HIV-1 involves the proteolytic processing of the polyprotein products Prgag and Prgag-pol that are encoded by the gag and pol genes in the viral genome. Inhibitors of this processing step have the potential to be important therapeutic agents in the management of acquired immunodeficiency syndrome. Current assays for inhibitors of HIV-1 protease are slow, cumbersome, or susceptible to interference by test compounds. An approach to the generation of a rapid, sensitive assay for HIV-1 protease inhibitors that is devoid of interference problems is to use a capture system which allows for isolation of the products from the reaction mixture prior to signal quantitation. In this paper, we describe a novel method for the detection of HIV-1 protease inhibitors utilizing the concept of particle concentration fluorescence. Our approach involves the use of the HIV-1 protease peptide substrate Ser-Gln-Asn-Tyr-Pro-Ile-Val which has been modified to contain a biotin moiety on one side and a fluorescein reporter molecule on the other side of the scissile Tyr-Pro bond. This substrate is efficiently cleaved by the HIV-1 protease and the reaction can be readily quantitated. Known inhibitors of the protease were readily detected using this new assay. In addition, this approach is compatible with existing instrumentation in use for broad screening and is highly sensitive, accurate, and reproducible.

New intramolecularly quenched fluorogenic peptide substrates for the study of the kinetic specificity of papain

A series of new substrates for determining the catalytic activity of cysteine proteinases is described. The rate of hydrolysis by papain was monitored by a fluorescence continuous assay based on internal resonance energy transfer using 5-[(2-aminoethyl)amino]naphtalene-1-sulfonic acid (EDANS) and 4-(4-dimethylaminophenylazo)benzoic acid (DABCYL) as fluorescent donor and quenching acceptor, respectively, in peptides with the general structure: DABCYL-Lys-Phe-Gly-Xxx-Ala-Ala-EDANS. The substrates were used to evaluate the effect of amino acid structure in the S1' position on the kinetic parameters for papain catalyzed hydrolysis.

The HIV-1 protease as a therapeutic target for AIDS

HIV produces a small , dimeric aspartyl protease which specifically cleaves the polyprotein precursors encoding the structural proteins and enzymes of the virus. This proteolytic activity is absolutely required for the production of mature, infectious virions and is therefore an attractive target for therapeutic intervention. This review summarizes the strategies and multidisciplinary efforts that have been applied to date to the identification of specific inhibitors of this critical viral enzyme. These inhibitors include rationally designed peptide substrate analogs, compounds conceived from tertiary structure information on the enzyme and natural products. Future directions in the discovery and development of HIV-1 protease inhibitors are also discussed.

Continuous assay of the hydrolytic activity of human immunodeficiency virus-1 protease

A rapid sensitive method for the quantitation in vitro of HIV-1 protease activity has been developed. A fluorogenic compound, N alpha-benzoyl-Arg-Gly-Phe-Pro-MeO-beta-naphthylamide, which contains Phe-Pro, a dipeptide bond recognized by HIV-1 protease, was used as substrate. The substrate was hydrolyzed by HIV-1 protease into a fluorescent naphthylated product (Pro-MeO-beta-naphthylamide). Fluorescence due to the release of Pro-MeO-beta-naphthylamide was measured continuously by spectrofluorometry. This oligopeptide was found to be a good substrate for HIV-1 protease. The Km and kappa cat for the hydrolysis of N alpha-benzoyl-Arg-Gly-Phe-Pro-MeO-beta- naphthylamide by HIV-1 protease were calculated to be 2.0 +/- 0.2 mM and 75 +/- 6 s-1, respectively. These values are comparable with those of other natural substrates of HIV-1 protease. The method is highly sensitive, reproducible, and suited to a variety of applications, including the analysis of large numbers of samples for detailed enzymological studies.

Antiviral and pharmacokinetic properties of C2 symmetric inhibitors of the human immunodeficiency virus type 1 protease

Specific processing of the human immunodeficiency virus (HIV) gag and gag-pol polyprotein gene products by the HIV protease is essential for the production of mature, infections progeny virions. Inhibitors of HIV protease block this maturation and thus prohibit the spread of HIV in vitro. Previously, we reported a series of novel, symmetric inhibitors of HIV protease designed to match the C2 symmetric structure of the active site of the enzyme. In response to the poor aqueous solubility of those lead compounds, we designed a series of analogs with substantially improved (greater than 10(4) fold) solubility. These inhibitors showed anti-HIV activity in H9 and MT4 cells at 0.05 to 10 microM, and in most cases, they were noncytotoxic at concentrations in excess of 100 microM. Further examination of one inhibitor (A-77003) revealed broad-spectrum activity against both HIV types 1 and 2, including azidothymidine-resistant HIV, in a variety of transformed and primary human cell lines. After administration of the inhibitors to rats, short half-lives and, with two notable exceptions, moderate oral bioavailability were observed. Additional pharmacokinetic studies in dogs and monkeys revealed the potential utility of A-77003 as an intravenous anti-HIV agent.

Water-soluble macromolecular fluorogenic substrates for assaying proteinases: determination of pancreatic elastase activity

Water-soluble macromolecular fluorogenic substrates were synthesized in order to develop an easy specific proteinase assay. The validity of this method was tested with porcine pancreatic elastase by using its specific peptidic substrate Ala-Ala-Pro-Ala linked to a hydrosoluble polymer. The octapeptidic sequence FTC-epsilon Aca-Ala-Ala-Pro-Ala-Gly-Gly-Gly was linked to a water-soluble and neutral poly-L-lysine derivative. The aminocaproyl residue and the triglycyl sequence were added in order to improve the stability of the substrate, and the accessibility of the specific sequence Ala-Ala-Pro-Ala to elastase, respectively. The assay is based on the quantitative precipitation of the polymeric substrate in isopropanol while the released soluble fluorescent peptidic moiety is fluorometrically titrated in the supernatant.

Characterization of recombinant human renin: kinetics, pH-stability, and peptidomimetic inhibitor binding

The kinetic behavior and pH-stability of recombinant human renin was analyzed using a new fluorogenic substrate based on the normal P6-P3' renin cleavage sequence in human angiotensinogen. The design of this fluorogenic substrate makes possible, for the first time, direct monitoring of the kinetics of proteolytic conversion of prorenin to renin. The pH-stability profile for renin, measured with the substrate at 25 degrees C, indicated a broad plateau of stability between pH 6.0 and 10.0. Analysis of the pH-activity profile of renin for the substrate indicated a minimum Km (approximately 1.8 microM) at pH approximately 7.4 and a maximum Vm between pH 7.4 and 8.0. The thermodynamics of the binding of a novel, soluble, peptidomimetic inhibitor to renin indicated it is possible to retain the tight-binding characteristics and enthalpy contributions to binding of larger peptide-derived inhibitors, while reducing inhibitor size and entropic contributions to binding. A novel derivative of the fluorogenic substrate, containing a 3-methyl histidine substitution at the P2 site, was used to test the recent hypothesis that renin functions by virtue of substrate-directed catalysis.

Adaptation of the plasma renin radioimmunoassay for use with HIV-1 protease

We have demonstrated the use of a radioimmunoassay to quantitate the peptidolytic activity of human immunodeficiency virus, type 1 (HIV-1) protease using a tetradecapeptide substrate of porcine renin, Asp-Arg-Val-Tyr-Ile-His-Pro-Phe-His-Leu-Leu-Val-Tyr-Ser. HIV-1 protease catalyzes cleavage of this substrate at the same Leu-Leu bond as does porcine renin, resulting in the formation of authentic angiotensin-I. The angiotensin-I product is then detected by use of a commercially available renin plasma assay kit, which constitutes the basis of the RIA. The radioimmunoassay provides detection of the protease-catalyzed formation of angiotensin-I at picomolar concentrations in vitro. We demonstrate the use of this assay in determining IC50 values for two HIV-1 protease inhibitors present in cell culture media and in standard assay buffer. An example of the potential development of this assay for the quantitation of these inhibitors present in ex vivo plasma samples is also presented.

Anthranilamide and nitrotyrosine as a donor-acceptor pair in internally quenched fluorescent substrates for endopeptidases: multicolumn peptide synthesis of enzyme substrates for subtilisin Carlsberg and pepsin

The preparations of N alpha-Fmoc-3-nitro-L-tyrosine and N-Boc-anthranilic acid Dhbt ester and their application to parallel multiple column solid-phase peptide synthesis is described. A series of peptide substrates containing an anthraniloyl group at the amino terminus and a 3-nitrotyrosyl residue close to the carboxyl terminus have been synthesized. The fluorescence of the anthraniloyl group, intramolecularly quenched by the 3-nitrotyrosine, increases with cleavage of peptide bonds situated between the two groups. The quenching mechanism is of the long-range resonance energy transfer type and long peptide substrates were constructed and used for kinetic measurement on subtilisin Carlsberg and pepsin. Complete quenching was observed even with more than 20 A between the centers of the chromophores, and substrates with up to 50 A between the chromophores were synthesized. The importance of long substrates for optimal enzymatic activity was demonstrated.

Development of synthetic peptide substrates for the poliovirus 3C proteinase

Picornaviruses, such as polio, translate their entire genome as a single polyprotein which must be proteolytically processed to produce the mature viral proteins. A majority of these cleavages are catalyzed by the virus-encoded cysteine proteinase, 3C. We report here the design and synthesis of a series of oligopeptide substrates, based upon native 3C cleavage sites, for an HPLC assay of poliovirus 3C proteinase activity. A similar series of peptides based upon human rhinovirus 3C cleavage sites was also examined. The enzyme shows a marked preference for those peptides with a proline in the P'2 position. A quenched fluorescent substrate suitable for continuous assay of 3C proteinase activity was also synthesized. Both the HPLC assay and the fluorescence assay were used to evaluate a number of potential 3C proteinase inhibitors.

Potent HIV-1 protease inhibitors with antiviral activities in vitro

A series of novel difluoroketones with low molecular weight (less than 600 m.u.) and which are potent inhibitors of the HIV-1 protease (IC50 = 1.0 to 21 nM) were synthesized. These compounds also exhibited antiviral activity by inhibition of the cytopathic effect of HIV-1(3)B in MT-4 cells in vitro.

Assay of HIV-1 proteinase: a colorimetric method using small peptide substrates

A colorimetric assay for HIV proteinase using small protected peptide substrates is described. Substrates are cleaved to release N-terminal prolyl peptides which react with isatin to form a blue product which is measured spectrophotometrically. The assay is suitable for use with pure enzyme or crude extracts derived from genetically engineered Escherichia coli.

A high throughput assay for inhibitors of HIV-1 protease. Screening of microbial metabolites

A novel method for discovery of HIV-1 protease inhibitors in complex biological samples has been developed. The assay is based on two specific reagents: a recombinant protein constituted by a portion of the HIV-1 Gag polyprotein comprising the p17-p24 cleavage site, fused to E. coli beta-galactosidase, and a monoclonal antibody which binds the fusion protein in the Gag region. Binding occurs only if the fusion protein has not been cleaved by the HIV-1 protease. The assay has been adapted for the screening of large numbers of samples in standard 96-well microtiter plates. Using this method about 12000 microbial fermentation broths have been tested and several HIV-1 protease inhibitory activities have been detected. One of these has been studied in detail.

Light-directed, spatially addressable parallel chemical synthesis

Solid-phase chemistry, photolabile protecting groups, and photolithography have been combined to achieve light-directed, spatially addressable parallel chemical synthesis to yield a highly diverse set of chemical products. Binary masking, one of many possible combinatorial synthesis strategies, yields 2n compounds in n chemical steps. An array of 1024 peptides was synthesized in ten steps, and its interaction with a monoclonal antibody was assayed by epifluorescence microscopy. High-density arrays formed by light-directed synthesis are potentially rich sources of chemical diversity for discovering new ligands that bind to biological receptors and for elucidating principles governing molecular interactions. The generality of this approach is illustrated by the light-directed synthesis of a dinucleotide. Spatially directed synthesis of complex compounds could also be used for microfabrication of devices.

beta-Galactosidase containing a human immunodeficiency virus protease cleavage site is cleaved and inactivated by human immunodeficiency virus protease

A "cleavage cassette" specifying a decapeptide human immunodeficiency virus (HIV) protease cleavage site was introduced into six different locations of beta-galactosidase (beta-D-galactoside galactohydrolase, EC 3.2.1.23) in Escherichia coli. Four of these constructs retained beta-galactosidase activity despite the insertion of the cleavage cassette. Of these four constructs, one was cleaved by HIV protease, resulting in the inactivation of beta-galactosidase both in vivo and in vitro. This cleavage was inhibited by pepstatin A, a known inhibitor of HIV protease. Thus, beta-galactosidase has been converted into an easily assayed substrate for HIV protease. An analogous construct of beta-galactosidase containing a polio protease cleavage site was cleaved likewise by polio protease, suggesting that this system may be generic for monitoring cleavage by a variety of proteases.

Stability and activity of human immunodeficiency virus protease: comparison of the natural dimer with a homologous, single-chain tethered dimer

A single-chain tethered dimer of human immunodeficiency virus protease (HIV-PR) was produced by expression of a synthetic gene in Escherichia coli. The tethered dimer, which consists of two 99-amino acid HIV-PR subunits linked together by a pentapeptide, was isolated from inclusion bodies and refolded as an active protease with enzymatic properties very similar to those of the natural dimer at pH 5.5. In addition to demonstrating that the tethered dimer is active, we have shown that the tethered dimer is more stable than the natural HIV-PR dimer at pH 7.0. This is attributed to dissociation of the natural HIV-PR dimer, for which a surprisingly high dissociation constant, 5 X 10(-8) M was measured. Furthermore, the tethered dimer offers an opportunity to produce asymmetric dimer mutants and thereby determine the effect of changes in one of the two subunits on protease activity. In one such mutant, a single active-site aspartic residue was changed to a glycine residue. This protein was inactive, consistent with a requirement for an aspartic residue from each subunit to constitute an active site of HIV-PR.

A simple, continuous fluorometric assay for HIV protease

Novel fluorogenic substrates for human immunodeficiency viral protease have been developed based on the principle of fluorescence energy transfer. Starting from a p24/p15 cleavage site-derived hexapeptide substrate. Ac-Thr-Ile-Nle-Nle-Gln-Arg-NH2, incorporation of 2-aminobenzoic acid in place of the acetyl group as the donor and p-NO2-Phe at the P1' position as acceptor gave the intramolecularly quenched fluorogenic substrate. Cleavage of the substrate by HIV protease released the fluorescent N-terminal tripeptide from its close apposition to the quenching nitrobenzyl group, resulting in enhanced fluorescence. An automated assay based on 96-well microtiter plates and a fluorometric plate reader have been developed, which allow high throughput of compounds in the search for HIV protease inhibitors.

Site specific functionalization of oligonucleotides for attaching two different reporter groups

The synthesis of an oligonucleotide functionalized to attach two different reporter groups at specific internucleotide linkages is described. To incorporate the amine specific reporter group the internucleotide linkage is modified to phosphoramidate (N-1-aminoalkyl) and for a thiol specific reporter group the internucleotide linkage is modified to a phosphorothioate diester. The synthetic cycle for introducing the modified internucleotide linkages at specific sites can be carried out using an automated DNA synthesizer. Combination of reporter groups have been attached successfully.

Affinity purification of HIV-1 and HIV-2 proteases from recombinant E. coli strains using pepstatin-agarose

A procedure is described which employs pepstatin-agarose for the affinity purification of either HIV-1 or HIV-2 protease from two similar recombinant E. coli constructs that were developed for the expression of these enzymes. HIV-2 protease was routinely expressed at much higher levels than the HIV-1 enzyme and pepstatin-agarose was the only chromatography step required to isolate pure HIV-2 protease from crude bacterial lysates. A Mono S ionic exchange step following pepstatin-agarose chromatography was sufficient to bring the HIV-1 protease to homogeneity. Purification of either enzyme can be completed in several days yielding homogeneous preparations suitable for crystallization and other physical characterization.

Design, activity, and 2.8 A crystal structure of a C2 symmetric inhibitor complexed to HIV-1 protease

A two-fold (C2) symmetric inhibitor of the protease of human immunodeficiency virus type-1 (HIV-1) has been designed on the basis of the three-dimensional symmetry of the enzyme active site. The symmetric molecule inhibited both protease activity and acute HIV-1 infection in vitro, was at least 10,000-fold more potent against HIV-1 protease than against related enzymes, and appeared to be stable to degradative enzymes. The 2.8 angstrom crystal structure of the inhibitor-enzyme complex demonstrated that the inhibitor binds to the enzyme in a highly symmetric fashion.

Applications of Imaging Spectroscopy in Molecular Biology II. Colony Screening Based on Absorption Spectra

Digital imaging spectroscopy has been used to obtain the grayscale spectrum of colored bacterial colonies directly from petri dishes. Up to 500 individual colony spectra can be simultaneously recorded and processed from a single plate. Spectra can be obtained in the visible to near infrared region (400nm-900nm) with 10nm resolution. Instrument response is normalized through run-time radiometric calibration such that each grayscale spectrum can be converted to the ground-state absorption spectrum of the colony. In this study, mutants of the photosynthetic bacterium Rhodobacter capsulatus have been differentiated by the absorption spectra of their pigment-protein complexes. This imaging technique is applicable to chromogenic systems in which colony and/or media color (e.g. indicator plates) provides a quantitative indicator of gene expression.