Poly(β-Amino Esters): Synthesis, Formulations, and Their Biomedical Applications

Role of Hydrophobic Modification in Spermine-Based Poly(β-amino ester)s for siRNA Delivery and Their Spray-Dried Powders for Inhalation and Improved Storage

After RNAi was first discovered over 20 years ago, siRNA-based therapeutics are finally becoming reality. However, the delivery of siRNA has remained a challenge. In our previous research, we found that spermine-based poly(β-amino ester)s are very promising for siRNA delivery. However, the role of hydrophobic modification in siRNA delivery of spermine-based poly(β-amino ester)s is not fully understood yet. In the current work, we synthesized spermine-based poly(β-amino ester)s with different percentages of oleylamine side chains, named P(SpOABAE). The chemical structures of the polymers were characterized by 1H NMR. The polymers showed efficient siRNA encapsulation determined by SYBR Gold assays. The hydrodynamic diameters of the P(SpOABAE) polyplexes from charge ratio N/P 1 to 20 were 30-100 nm except for aggregation phenomena observed at N/P 3. Morphology of the polyplexes was visualized by atomic force microscopy, and cellular uptake was determined by flow cytometry in H1299 cells, where all the polyplexes showed significantly higher cellular uptake than hyperbranched polyethylenimine (25 kDa). The most hydrophobic P(SpOABAE) polyplexes were able to achieve more than 90% GFP knockdown in H1299/eGFP cells. The fact that gene silencing efficacy increased with hydrophobicity but cellular uptake was affected by both charge and hydrophobic interactions highlights the importance of endosomal escape. For pulmonary administration and improved storage stability, the polyplexes were spray-dried. Results confirmed the maintained siRNA activity after storage for 3 months at room temperature, indicating potential for dry powder inhalation.

Homologous-targeting biomimetic nanoparticles co-loaded with melittin and a photosensitizer for the combination therapy of triple negative breast cancer

Melittin (Mel) is considered a promising candidate drug for the treatment of triple negative breast cancer (TNBC) due to its various antitumor effects. However, its clinical application is hampered by notable limitations, including hemolytic activity, rapid clearance, and a lack of tumor selectivity. Here, we designed novel biomimetic nanoparticles based on homologous tumor cell membranes and poly(lactic-co-glycolic acid) (PLGA)/poly(beta-aminoester) (PBAE), denoted MDM@TPP, which efficiently coloaded the cytolytic peptide Mel and the photosensitizer mTHPC. Both in vitro and in vivo, the MDM@TPP nanoparticles effectively mitigated the acute toxicity of melittin and exhibited strong TNBC targeting ability due to the homologous targeting effect of the tumor cell membrane. Under laser irradiation, the MDM@TPP nanoparticles showed excellent photodynamic performance and thus accelerated the release of Mel by disrupting cell membrane integrity. Moreover, Mel combined with photodynamic therapy (PDT) can synergistically kill tumor cells and induce significant immunogenic cell death, thereby stimulating the maturation of dendritic cells (DCs). In 4T1 tumor-bearing mice, MDM@TPP nanoparticles effectively inhibited the growth and metastasis of primary tumors and finally prevented tumor recurrence by improving the immune response.

Recent Progress in Nucleic Acid Pulmonary Delivery toward Overcoming Physiological Barriers and Improving Transfection Efficiency

Pulmonary delivery of therapeutic agents has been considered the desirable administration route for local lung disease treatment. As the latest generation of therapeutic agents, nucleic acid has been gradually developed as gene therapy for local diseases such as asthma, chronic obstructive pulmonary diseases, and lung fibrosis. The features of nucleic acid, specific physiological structure, and pathophysiological barriers of the respiratory tract have strongly affected the delivery efficiency and pulmonary bioavailability of nucleic acid, directly related to the treatment outcomes. The development of pharmaceutics and material science provides the potential for highly effective pulmonary medicine delivery. In this review, the key factors and barriers are first introduced that affect the pulmonary delivery and bioavailability of nucleic acids. The advanced inhaled materials for nucleic acid delivery are further summarized. The recent progress of platform designs for improving the pulmonary delivery efficiency of nucleic acids and their therapeutic outcomes have been systematically analyzed, with the application and the perspectives of advanced vectors for pulmonary gene delivery.

Zwitterionic Strategy to Stabilize Self-Immolative Polymer Nanoarchitecture under Physiological pH for Drug Delivery In Vitro and In Vivo

The major bottleneck in using polymer nanovectors for biomedical application, particularly those based on self-immolative poly(amino ester) (PAE), lies in their uncontrolled autodegradation at physiological pH before they can reach the intended target. Here, an elegant triblock-copolymer strategy is designed to stabilize the unstable PAE chains via zwitterionic interactions under physiological pH (pH 7.4) and precisely program their enzyme-responsive biodegradation specifically within the intracellular compartments, ensuring targeted delivery of the cargoes. To achieve this goal, biodegradable polycaprolactone (PCL) platform is chosen, and structure-engineered several di- and triblock architectures to arrive the precise macromolecular geometry. The hydrophobic-PCL core and hydrophilic anionic-PCL block at the periphery shield PAEs against autodegradation, thereby ensuring stability under physiological pH in PBS, FBS, cell culture medium and bloodstream. The clinical anticancer drug doxorubicin and deep-tissue penetrable near-infrared IR-780 biomarker is encapsulated to study their biological actions by in vitro live cancer cells and in vivo bioimaging in live animals. These zwitterions are biocompatible, nonhemolytic, and real-time in vitro live-cell confocal studies have confirmed their internalization and enzymatic biodegradation in the endo-lysosomal compartments to deliver the payload. In vivo bioimaging establishes their prolonged blood circulation for over 72 h, and the biodistribution analysis reveals the accumulation of nanoparticles predominantly in the excretory organs.

Enhancing gene transfection of poly(β-amino ester)s through modulation of amphiphilicity and chain sequence

Poly(β-amino ester)s (PAEs) have emerged as a type of highly safe and efficient non-viral DNA delivery vectors. However, the influence of amphiphilicity and chain sequence on DNA transfection efficiency and safety profile remain largely unexplored. In this study, four PAEs with distinct amphiphilicity and chain sequences were synthesized. Results show that both amphiphilicity and chain sequence significantly affect the DNA binding and condensation ability of PAEs, as well as size, zeta potential and cellular uptake of PAE/DNA polyplexes. PAEs with different amphiphilicity and chain sequence exhibit cell type-dependent transfection capabilities: in human bladder transitional cell carcinoma (UM-UC-3), hydrophilic PAE (P-Philic) and amphiphilic PAE random copolymer (R-Amphilic) exhibit relatively higher gene transfection efficiency, while in human bladder epithelial immortalized cells (SV-HUC-1), hydrophobic PAE (P-Phobic), R-Amphilic, and amphiphilic PAE block copolymer (B-Amphilic) demonstrate higher transfection capability. Regardless of cell types, amphiphilic PAE block copolymer (B-Amphilic) always exhibits much lower gene transfection efficiency. In addition, in human colon cancer cells (HCT-116), P-Philic and R-Amphilic achieved superior gene transfection efficiency at high and low polymer/DNA weight ratios, respectively. Importantly, R-Amphilic can effectively deliver the gene encoding tumor necrosis factor-related apoptosis-inducing ligand (TRAIL) to human chondrosarcoma cells SW1353 to induce their apoptosis, highlighting its potential application in cancer gene therapy. This study not only establishes a new paradigm for enhancing the gene transfection efficiency of PAEs by modulating their amphiphilicity and chain sequence but also identifies R-Amphilic as a potential candidate for the effective delivery of TRAIL gene in cancer gene therapy.

Post cross-linked ROS-responsive poly(β-amino ester)-plasmid polyplex NPs for gene therapy of EBV-associated nasopharyngeal carcinoma

Nasopharyngeal carcinoma (NPC) is one of the most common tumors in South China and Southeast Asia and is thought to be associated with Epstein-Barr virus (EBV) infection. Downregulation of latent membrane protein 1 (LMP1) encoded by EBV can reduce the expression of NF-κB and PI3K, induce apoptosis, and inhibit the growth of EBV-related NPC. For targeted cleavage of the Lmp1 oncogene via the CRISPR/Cas9 gene editing system, a post cross-linked ROS-responsive poly(β-amino ester) (PBAE) polymeric vector was developed for the delivery of CRISPR/Cas9 plasmids both in vitro and in vivo. After composition optimization, the resultant polymer-plasmid polyplex nanoparticles (NPs) showed a diameter of ∼230 nm and a zeta potential of 22.3 mV with good stability. Compared with the non-cross-linked system, the cross-linked NPs exhibited efficient and quick cell uptake, higher transfection efficiency in EBV-positive C666-1 cells (53.5% vs. 40.6%), more efficient gene editing ability against the Mucin2 model gene (Muc2) (17.9% vs. 15.4%) and Lmp1 (8.5% vs. 5.6%), and lower intracellular reactive oxygen species (ROS) levels. The NPs achieved good tumor penetration and tumor growth inhibition in the C666-1 xenograft tumor model via Lmp1 cleavage, indicating their potential for gene therapy of EBV-related NPC.

Backbone cationized highly branched poly(β-amino ester)s as enhanced delivery vectors in non-viral gene therapy

Gene therapy holds great potential for treating Lung Cystic Fibrosis (CF) which is a fatal hereditary condition arising from mutations in the CF transmembrane conductance regulator (CFTR) gene, resulting in dysfunctional CFTR protein. However, the advancement and clinical application of CF gene therapy systems have been hindered due to the absence of a highly efficient delivery vector. In this work, we introduce a new generation of highly branched poly(β-amino ester) (HPAE) gene delivery vectors for CF treatment. Building upon the classical chemical composition of HPAE, a novel backbone cationization strategy was developed to incorporate additional functional amine groups into HPAE without altering their branching degree. By carefully adjusting the type, proportion, and backbone distribution of the added cationic groups, a series of highly effective HPAE gene delivery vectors were successfully constructed for CF disease gene therapy. In vitro assessment results showed that the backbone cationized HPAEs with randomly distributed 10% proportion of 1-(3-aminopropyl)-4-methylpiperazine (E7) amine groups exhibited superior transfection performance than their counterparts. Furthermore, the top-performed backbone cationized HPAEs, when loaded with therapeutic plasmids, successfully reinstated CFTR protein expression in the CFBE41o- disease model, achieving levels 20-23 times higher than that of normal human bronchial epithelial (HBE) cells. Their therapeutic effectiveness significantly surpassed that of the currently advanced commercial vectors, Xfect and Lipofectamine 3000.

Redox-Responsive Polymeric Nanoparticle for Nucleic Acid Delivery and Cancer Therapy: Progress, Opportunities, and Challenges

Cancer development and progression of cancer are closely associated with the activation of oncogenes and loss of tumor suppressor genes. Nucleic acid drugs (e.g., siRNA, mRNA, and DNA) are widely used for cancer therapy due to their specific ability to regulate the expression of any cancer-associated genes. However, nucleic acid drugs are negatively charged biomacromolecules that are susceptible to serum nucleases and cannot cross cell membrane. Therefore, specific delivery tools are required to facilitate the intracellular delivery of nucleic acid drugs. In the past few decades, a variety of nanoparticles (NPs) are designed and developed for nucleic acid delivery and cancer therapy. In particular, the polymeric NPs in response to the abnormal redox status in cancer cells have garnered much more attention as their potential in redox-triggered nanostructure dissociation and rapid intracellular release of nucleic acid drugs. In this review, the important genes or signaling pathways regulating the abnormal redox status in cancer cells are briefly introduced and the recent development of redox-responsive NPs for nucleic acid delivery and cancer therapy is systemically summarized. The future development of NPs-mediated nucleic acid delivery and their challenges in clinical translation are also discussed.

Ciprofloxacin Poly(β-amino ester) Conjugates Enhance Antibiofilm Activity and Slow the Development of Resistance

To tackle the emerging antibiotic resistance crisis, novel antimicrobial approaches are urgently needed. Bacterial biofilms are a particular concern in this context as they are responsible for over 80% of bacterial infections and are inherently more recalcitrant toward antimicrobial treatments. The high tolerance of biofilms to conventional antibiotics has been attributed to several factors, including reduced drug diffusion through the dense exopolymeric matrix and the upregulation of antimicrobial resistance machinery with successful biofilm eradication requiring prolonged high doses of multidrug treatments. A promising approach to tackle bacterial infections involves the use of polymer drug conjugates, shown to improve upon free drug toxicity and bioavailability, enhance drug penetration through the thick biofilm matrix, and evade common resistance mechanisms. In the following study, we conjugated the antibiotic ciprofloxacin (CIP) to a small library of biodegradable and biocompatible poly(β-amino ester) (PBAE) polymers with varying central amine functionality. The suitability of the polymers as antibiotic conjugates was then verified in a series of assays including testing of efficacy and resistance response in planktonic Gram-positive and Gram-negative bacteria and the reduction of viability in mono- and multispecies biofilm models. The most active polymer within the prepared PBAE-CIP library was shown to achieve an over 2-fold increase in the reduction of biofilm viability in a Pseudomonas aeruginosa monospecies biofilm and superior elimination of all the species present within the multispecies biofilm model. Hence, we demonstrate that CIP conjugation to PBAEs can be employed to achieve improved antibiotic efficacy against clinically relevant biofilm models.

Designing a green poly(β-amino ester) for the delivery of nicotinamide drugs with biological activities and conducting a DFT investigation

The environmentally friendly polymerization process was carried out using microwave irradiation without additional solvents or catalysts to produce poly(β-amino ester) (PβAE) which served as a drug delivery system. PβAE was synthesized through Michael addition polymerization of 1,4-butane diol diacrylate and piperazine. Swelling and biodegradation studies were conducted in various solvents and phosphate-buffered saline (PBS, pH 7.4) at 37 °C to evaluate the properties of the polymeric gel. The PβAE matrix demonstrated solubility enhancement for hydrophobic antimicrobial and antitumor-active nicotinamide derivatives (TEINH, APTAT, and MOAPM), controlling their release over 10 days in (PBS). The successful formation of free and loaded PβAE with nicotinamide active materials was confirmed by spectroscopic analysis including Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Optimization and physical descriptor determination via the DFT/B3LYP-631(G) basis set were performed to aid in the biological evaluation of these compounds with elucidation of their physical and chemical interaction between poly(β-amino ester) and nicotinamide drugs.

Liver-targeted nanoparticles delivering nitric oxide reduce portal hypertension in cirrhotic rats

Nitric oxide (NO) is a small vasodilator playing a key role in the pathogenesis of portal hypertension. Here, we assessed the potential therapeutic effect of a NO donor targeted to the liver by poly(beta-amino ester) nanoparticles (pBAE NPs) in experimental cirrhosis. Retinol-functionalized NO donor pBAE NPs (Ret pBAE NPs) were synthetized with the aim of actively targeting the liver. Administration of Ret pBAE NPs resulted in uptake and transfection by the liver and spleen. NPs were not found in other organs or the systemic circulation. Treatment with NO donor Ret pBAE NPs (30 mg/ kg body weight) significantly decreased aspartate aminotransferase, lactate dehydrogenase and portal pressure (9.75 ± 0.64 mmHg) compared to control NPs (13.4 ± 0.53 mmHg) in cirrhotic rats. There were no effects on mean arterial pressure and cardiac output. Liver-targeted NO donor NPs reduced collagen fibers and steatosis, activation of hepatic stellate cells and mRNA expression of profibrogenic and proinflammatory genes. Finally, Ret pBAE NPs displayed efficient transfection in human liver slices. Overall, liver-specific NO donor NPs effectively target the liver and mitigated inflammation and portal hypertension in cirrhotic rats. The use of Ret pBAE may prove to be an effective therapeutic strategy to treat advanced liver disease.

Fabrication of poly(β-amino ester) and hyaluronic acid based pH responsive nanocomplex as an antibiotic release system

World Health Organization (WHO) warns about antimicrobial resistance (AMR) considered as the most serious threats to global health, food security, and development. There are various efforts for elimination of this serious issue. These efforts include education of individuals, new policies, development of new antimicrobials and new materials for effective delivery. Novel drug delivery systems with ability of local and on-demand delivery are one of the promising approaches for prevention of AMR. In this regard, a pH-responsive antibiotic delivery system based on pH-responsive poly(β-amino ester) (PBAE) and enzyme responsive hyaluronic acid (HA). The polymeric nanocomplexes were obtained via electrostatic complexation of PBAE and HA in the presence of a model antibiotics, colistin and vancomycin. The particle sizes at pH 7.4 were determined in the range of 131-730 nm and 120-400 nm by DLS and STEM, respectively. When pH was switched from 7.4 to 5.5, the hydrodynamic diameter increased 2.5-32 fold. The drug release performances were tested using FITC-labeled antibiotics via fluorescence spectroscopy. The nanocomplexes released the drugs more at pH 5.5 compared to pH 7.4. Antibacterial activity of the system was evaluated on various bacteria. The nanocomplex loaded with the antibiotics exhibited significantly greater efficacy against E. coli and S. aureus.

TPGS-b-PBAE Copolymer-Based Polyplex Nanoparticles for Gene Delivery and Transfection In Vivo and In Vitro

Poly (β-amino ester) (PBAE) is an exceptional non-viral vector that is widely used in gene delivery, owing to its exceptional biocompatibility, easy synthesis, and cost-effectiveness. However, it carries a high surface positive charge that may cause cytotoxicity. Therefore, hydrophilic d-α-tocopherol polyethylene glycol succinate (TPGS) was copolymerised with PBAE to increase the biocompatibility and to decrease the potential cytotoxicity of the cationic polymer-DNA plasmid polyplex nanoparticles (NPs) formed through electrostatic forces between the polymer and DNA. TPGS-b-PBAE (TBP) copolymers with varying feeding molar ratios were synthesised to obtain products of different molecular weights. Their gene transfection efficiency was subsequently evaluated in HEK 293T cells using green fluorescent protein plasmid (GFP) as the model because free GFP is unable to easily pass through the cell membrane and then express as a protein. The particle size, ζ-potential, and morphology of the TBP2-GFP polyplex NPs were characterised, and plasmid incorporation was confirmed through gel retardation assays. The TBP2-GFP polyplex NPs effectively transfected multiple cells with low cytotoxicity, including HEK 293T, HeLa, Me180, SiHa, SCC-7 and C666-1 cells. We constructed a MUC2 (Mucin2)-targeting CRISPR/cas9 gene editing system in HEK 293T cells, with gene disruption supported by oligodeoxynucleotide (ODN) insertion in vitro. Additionally, we developed an LMP1 (latent membrane protein 1)-targeting CRISPR/cas9 gene editing system in LMP1-overexpressing SCC7 cells, which was designed to cleave fragments expressing the LMP1 protein (related to Epstein-Barr virus infection) and thus to inhibit the growth of the cells in vivo. As evidenced by in vitro and in vivo experiments, this system has great potential for gene therapy applications.

Hydroxyl-rich branched polycations for nucleic acid delivery

Recently, nucleic acid delivery has become an amazing route for the treatment of various malignant diseases, and polycationic vectors are attracting more and more attention among gene vectors. However, conventional polycationic vectors still face many obstacles in nucleic acid delivery, such as significant cytotoxicity, high protein absorption behavior, and unsatisfactory blood compatibility caused by a high positive charge density. To solve these problems, the fabrication of hydroxyl-rich branched polycationic vectors has been proposed. For the synthesis of hydroxyl-rich branched polycations, a one-pot method is considered as the preferred method due to its simple preparation process. In this review, typical one-pot methods for fabricating hydroxyl-rich polycations are presented. In particular, amine-epoxide ring-opening polymerization as a novel approach is mainly introduced. In addition, various therapeutic scenarios of hydroxyl-rich branched polycations via one-pot fabrication are also generalized. We believe that this review will motivate the optimized design of hydroxyl-rich branched polycations for potential nucleic acid delivery and their bio-applications.

Engineering Degradation Rate of Polyphosphazene-Based Layer-by-Layer Polymer Coatings

Degradable layer-by-layer (LbL) polymeric coatings have distinct advantages over traditional biomedical coatings due to their precision of assembly, versatile inclusion of bioactive molecules, and conformality to the complex architectures of implantable devices. However, controlling the degradation rate while achieving biocompatibility has remained a challenge. This work employs polyphosphazenes as promising candidates for film assembly due to their inherent biocompatibility, tunability of chemical composition, and the buffering capability of degradation products. The degradation of pyrrolidone-functionalized polyphosphazenes was monitored in solution, complexes and LbL coatings (with tannic acid), providing the first to our knowledge comparison of solution-state degradation to solid-state LbL degradation. In all cases, the rate of degradation accelerated in acidic conditions. Importantly, the tunability of the degradation rate of polyphosphazene-based LbL films was achieved by varying film assembly conditions. Specifically, by slightly increasing the ionization of tannic acid (near neutral pH), we introduce electrostatic "defects" to the hydrogen-bonded pairs that accelerate film degradation. Finally, we show that replacing the pyrrolidone side group with a carboxylic acid moiety greatly reduces the degradation rate of the LbL coatings. In practical applications, these coatings have the versatility to serve as biocompatible platforms for various biomedical applications and controlled release systems.

Poly-beta-amino-ester licofelone conjugates development for osteoarthritis treatment

Disease-modifying osteoarthritis drugs (DMOADs) are a new therapeutic class for osteoarthritis (OA) prevention or inhibition of the disease development. Unfortunately, none of the DMOADs have been clinically approved due to their poor therapeutic performances in clinical trials. The joint environment has played a role in this process by limiting the amount of drug effectively delivered as well as the time that the drug stays within the joint space. The current study aimed to improve the delivery of the DMOADs into cartilage tissue by increasing uptake and retention time of the DMOADs within the tissue. Licofelone was used a model DMOAD due to its significant therapeutic effect against OA progression as shown in the recent phase III clinical trial. For this purpose licofelone was covalently conjugated to the two different A16 and A87 poly-beta-amino-ester (PBAEs) polymers taking advantage of their hydrolysable, cytocompatible, and cationic nature. We have shown cartilage uptake of the licofelone-PBAE conjugates increased 18 times and retention in tissues was prolonged by 37 times compared to the equivalent dose of the free licofelone. Additionally, these licofelone conjugates showed no detrimental effect on the chondrocyte viability. In conclusion, the cationic A87 and A16 PBAE polymers increased the amount of licofelone within the cartilage, which could potentially enhance the therapeutic effect and pharmacokinetic performance of this drug and other DMOADs clinically.

Adhesive, Flexible, and Fast Degradable 3D-Printed Wound Dressings with a Simple Composition

3D printing technology has revolutionized the field of wound dressings, offering tailored solutions with mechanical support to facilitate wound closure. In addition to personalization, the intricate nature of the wound healing process requires wound dressing materials with diverse properties, such as moisturization, flexibility, adhesion, anti-oxidation and degradability. Unfortunately, current materials used in digital light processing (DLP) 3D printing have been inadequate in meeting these crucial criteria. This study introduces a novel DLP resin that is biocompatible and consists of only three commonly employed non-toxic compounds in biomaterials, that is, dopamine, poly(ethylene glycol) diacrylate, and N-vinylpyrrolidone. Simple as it is, this material system fulfills all essential functions for effective wound healing. Unlike most DLP resins that are non-degradable and rigid, this material exhibits tunable and rapid degradation kinetics, allowing for complete hydrolysis within a few hours. Furthermore, the high flexibility enables conformal application of complex dressings in challenging areas such as finger joints. Using a difficult-to-heal wound model, the manifold positive effects on wound healing in vivo, including granulation tissue formation, inflammation regulation, and vascularization are substantiated. The simplicity and versatility of this material make it a promising option for personalized wound care, holding significant potential for future translation.

Fluorinated amphiphilic Poly(β-Amino ester) nanoparticle for highly efficient and specific delivery of nucleic acids to the Lung capillary endothelium

Endothelial cell dysfunction occurs in a variety of acute and chronic pulmonary diseases including pulmonary hypertension, viral and bacterial pneumonia, bronchopulmonary dysplasia, and congenital lung diseases such as alveolar capillary dysplasia with misalignment of pulmonary veins (ACDMPV). To correct endothelial dysfunction, there is a critical need for the development of nanoparticle systems that can deliver drugs and nucleic acids to endothelial cells with high efficiency and precision. While several nanoparticle delivery systems targeting endothelial cells have been recently developed, none of them are specific to lung endothelial cells without targeting other organs in the body. In the present study, we successfully solved this problem by developing non-toxic poly(β-amino) ester (PBAE) nanoparticles with specific structure design and fluorinated modification for high efficiency and specific delivery of nucleic acids to the pulmonary endothelial cells. After intravenous administration, the PBAE nanoparticles were capable of delivering non-integrating DNA plasmids to lung microvascular endothelial cells but not to other lung cell types. IVIS whole body imaging and flow cytometry demonstrated that DNA plasmid were functional in the lung endothelial cells but not in endothelial cells of other organs. Fluorination of PBAE was required for lung endothelial cell-specific targeting. Hematologic analysis and liver and kidney metabolic panels demonstrated the lack of toxicity in experimental mice. Thus, fluorinated PBAE nanoparticles can be an ideal vehicle for gene therapy targeting lung microvascular endothelium in pulmonary vascular disorders.

A biomimetic phototherapeutic nanoagent based on bacterial double-layered membrane vesicles for comprehensive treatment of oral squamous cell carcinoma

As one of the most common malignancies, oral squamous cell carcinoma (OSCC) with high rates of invasiveness and metastasis threatens people's health worldwide, while traditional therapeutic approaches have not met the requirement of its cure. Phototherapies including photothermal therapy (PTT) and photodynamic therapy (PDT) have shown great potential for OSCC treatment due to their noninvasiveness or minimal invasiveness, high selectivity and little tolerance. However, PTT or PDT alone makes it difficult to eradicate OSCC and prevent its metastasis and recurrence. Here, double-layered membrane vesicles (DMVs) were extracted from attenuated Porphyromonas gingivalis, one of the most common pathogens inside the oral region, and served as an immune adjuvant to develop a biomimetic phototherapeutic nanoagent named PBAE/IR780@DMV for OSCC treatment via combining dual PTT/PDT and robust antitumor immunity. To obtain PBAE/IR780@DMV, poly(β-amino) ester (PBAE) was used as a carrier material to prepare the nanoparticles for loading IR780, a widely known photosensitizer possessing both PTT and PDT capabilities, followed by surface wrapping with DMVs. Upon 808 nm laser irradiation, PBAE/IR780@DMV exerted strong antitumor effects against OSCC both in vitro and in vivo, via combining PTT/PDT and specific immune responses triggered by tumor-associated antigens and DMVs. Altogether, this study provides a promising biomimetic phototherapeutic nanoagent for comprehensive treatment of OSCC.

Advances in CAR-Engineered Immune Cell Generation: Engineering Approaches and Sourcing Strategies

Chimeric antigen receptor T-cell (CAR-T) therapy has emerged as a highly efficacious treatment modality for refractory and relapsed hematopoietic malignancies in recent years. Furthermore, CAR technologies for cancer immunotherapy have expanded from CAR-T to CAR-natural killer cell (CAR-NK), CAR-cytokine-induced killer cell (CAR-CIK), and CAR-macrophage (CAR-MΦ) therapy. Nevertheless, the high cost and complex manufacturing processes of ex vivo generation of autologous CAR products have hampered broader application. There is an urgent need to develop an efficient and economical paradigm shift for exploring new sourcing strategies and engineering approaches toward generating CAR-engineered immune cells to benefit cancer patients. Currently, researchers are actively investigating various strategies to optimize the preparation and sourcing of these potent immunotherapeutic agents. In this work, the latest research progress is summarized. Perspectives on the future of CAR-engineered immune cell manufacturing are provided, and the engineering approaches, and diverse sources used for their development are focused upon.

Hybrid Poly(β-amino ester) Triblock Copolymers Utilizing a RAFT Polymerization Grafting-From Methodology

The biocompatibility, biodegradability, and responsiveness of poly(β-amino esters) (PBAEs) has led to their widespread use as biomaterials for drug and gene delivery. Nonetheless, the step-growth polymerization mechanism that yields PBAEs limits the scope for their structural optimization toward specific applications because of limited monomer choice and end-group modifications. Moreover, to date the post-synthetic functionalization of PBAEs has relied on grafting-to approaches, challenged by the need for efficient polymer-polymer coupling and potentially difficult post-conjugation purification. Here a novel grafting-from approach to grow reversible addition-fragmentation chain transfer (RAFT) polymers from a PBAE scaffold is described. This is achieved through PBAE conversion into a macromolecular chain transfer agent through a multistep capping procedure, followed by RAFT polymerization with a range of monomers to produce PBAE-RAFT hybrid triblock copolymers. Following successful synthesis, the potential biological applications of these ABA triblock copolymers are illustrated through assembly into polymeric micelles and encapsulation of a model hydrophobic drug, followed by successful nanoparticle (NP) uptake in breast cancer cells. The findings demonstrate this novel synthetic methodology can expand the scope of PBAEs as biomaterials.

Potent gene delivery from fluorinated poly(β-amino ester) in adhesive and suspension difficult-to-transfect cells for apoptosis and ferroptosis

Tremendous efforts have been made to improve polymeric property in gene delivery performances, especially when obstacle of transferring gene construct into difficult-to-transfect cells occurs. Innovations in the area of fluorination and fluorinated compounds with biomedical potential in medicinal chemistry are believed to assist in the development of new therapeutics. Fluorine modified polymers have shown to navigate the gene transfection cellular barriers and promoted the transfection outcomes. Gene transfer into some liver cancer cells and human leukemia cells has always been a challenge. Here, by facile incorporation of a fluorine containing amine monomer, 1H,1H-undecafluorohexylamine, fluorinated poly(β-amino ester) (FPAE) was synthesized to significantly improve the transfection performance, achieving high transfection efficiency of 87% and 55% in two representative difficult-to-transfect cells, HepG2 and Molt-4, which were cultured in adhesive and suspension condition, respectively. However, the potency of Lipofectamine 3000 was very limited. More importantly, functional studies revealed that FPAE can dramatically outperform Lipofectamine 3000 in delivering Bcl-xL and PKCβII to either provide the protection against apoptosis or promote the ferroptosis in HepG2 cells. This work facilitates gene therapies by overcoming biological barriers for targeting difficult-to-transfect cells and disease models when medically necessary.

Elucidating the Effect of Amine Charge State on Poly(β-amino ester) Degradation Using Permanently Charged Analogs

With synthetic ease and tunable degradation lifetimes, poly(β-amino ester)s (PBAEs) have found use in increasingly diverse applications, from gene therapy to thermosets. Protonatable amines in each repeating unit impart pH-dependent solution behavior and lifetimes, with acidic conditions favoring solubility, yet slowing hydrolysis. Due in part to these interconnected phenomena governing pH-dependent PBAE degradation, predictive degradation models, which would enable user-defined lifetimes, remain elusive. To separate the effects of charge state and solution pH on PBAE degradation, we synthesized poly(β-quaternary ammonium ester)s (PBQAEs), which differ from their parent PBAEs only by an additional methyl group, generating polymers with pH-independent cationic charge. Like PBAEs, PBQAE hydrolysis accelerates with increasing pH, although at a given pH, PBAE degradation outpaces PBQAE degradation. This difference is more pronounced in basic solutions, suggesting that deprotonated PBAE amines accelerate hydrolysis, providing an additional tuning parameter to PBAE lifetime and informing the degradation of PBAEs and other pH-responsive polymers.

Synthesis and application of spermine-based amphiphilic poly(β-amino ester)s for siRNA delivery

Small interfering RNA (siRNA) can trigger RNA interference (RNAi) to therapeutically silence disease-related genes in human cells. The approval of siRNA therapeutics by the FDA in recent years generated a new hope in novel and efficient siRNA therapeutics. However, their therapeutic application is still limited by the lack of safe and efficient transfection vehicles. In this study, we successfully synthesized a novel amphiphilic poly(β-amino ester) based on the polyamine spermine, hydrophobic decylamine and 1,4-butanediol diacrylate, which was characterized by 1H NMR spectroscopy and size exclusion chromatography (SEC, Mn = 6000 Da). The polymer encapsulated siRNA quantitatively from N/P 5 on as assessed by fluorescence intercalation while maintaining optimal polyplex sizes and zeta potentials. Biocompatibility and cellular delivery efficacy were also higher than those of the commonly used cationic, hyperbranched polymer polyethylenimine (PEI, 25 kDa). Optimized formulations mediated around 90% gene silencing in enhanced green fluorescence protein expressing H1299 cells (H1299-eGFP) as determined by flow cytometry. These results suggest that spermine-based, amphiphilic poly(β-amino ester)s are very promising candidates for efficient siRNA delivery.

Vaginal Drug Delivery Systems to Control Microbe-Associated Infections

The vagina has been regarded as a crucial route for drug delivery. Despite the wide range of available vaginal dosage forms for vaginal infection control, poor drug absorptivity remains a significant challenge due to various biological barriers in the vagina, such as mucus, epithelium, immune systems, and others. To overcome these barriers, different types of vaginal drug delivery systems (VDDSs), with outstanding mucoadhesive, mucus-penetrating properties, have been designed to enhance the absorptivity of vagina-administered agents in the past decades. In this Review, we introduce a general understanding of vaginal administration, its biological barriers, the commonly used VDDSs, such as nanoparticles and hydrogels, and their applications in controlling microbe-associated vaginal infections. Additionally, further challenges and concerns regarding the design of VDDSs will be discussed.

Enhancing the Gene Transfection of Poly(β-amino ester)/DNA Polyplexes by Modular Manipulation of Amphiphilicity

Poly(β-amino ester)s (PAEs) have been widely developed for gene delivery, and hydrophobic modification can further enhance their gene transfection efficiency. However, systematic manipulation of amphiphilicity of PAEs through copolymerization with hydrophobic monomers is time-consuming and, to some extent, uncontrollable. Here, a modular strategy is developed to manipulate the amphiphilicity of the PAE/DNA polyplexes. A hydrophobic polymer (DD-C12-122) and a hydrophilic polymer (DD-90-122) are synthesized separately and used as a hydrophobic module and a hydrophilic module, respectively. The amphiphilicity of polyplexes could be manipulated by changing the ratio of the hydrophobic module and hydrophilic module. Using the modular strategy, the PAE/DNA polyplexes with the highest gene transfection efficiency and safety profile as well as possible mechanisms are identified. The modular strategy provides a novel way to engineer the hydrophobicity of PAEs to improve their gene transfection and can be easily generalized and potentially extended to other polymeric gene delivery systems.

Comprehensively Optimizing Fenton Reaction Factors for Antitumor Chemodynamic Therapy by Charge-Reversal Theranostics

Chemodynamic therapy (CDT) is a highly tumor-specific treatment, while its efficacy is compromised by the intratumoral Fenton reaction efficiency, which is determined by the following reaction factors, including the availability of Fenton ions (e.g., Fe2+), the amount of H2O2, and the degree of acidity. Synchronous optimization of these factors is a big challenge for efficient CDT. Herein, a strategy of comprehensively optimizing Fenton reaction factors was developed for traceable multistage augmented CDT by charge-reversal theranostics. The customized pH-responsive poly(ethylene)glycol-poly(β-amino esters) (PEG-PAE) micelle (PM) was prepared as the carrier. Glucose oxidase (GOx), Fe2+, and pH-responsive second near-infrared (NIR-II) LET-1052 probe were coloaded by PM to obtain the final theranostics. The activity of metastable Fe2+ remained by the unsaturated coordination with PEG-PAE. Then tumor accumulation and exposure of Fe2+ were achieved by charge-reversal cationization of PEG-PAE, which was further enhanced by a GOx catalysis-triggered pH decrease. Together with the abundant H2O2 generation and pH decrease through GOx catalysis, the limiting factors of the Fenton reaction were comprehensively optimized, achieving the enhanced CDT both in vitro and in vivo. These findings provide a strategy for comprehensively optimizing intratumoral Fenton reaction factors to overcome the intrinsic drawbacks of current CDT.

Spermine-Based Poly(β-amino ester)s for siRNA Delivery against Mutated KRAS in Lung Cancer

Polyethylenimine (PEI) is a highly efficient cationic polymer for nucleic acid delivery, and although it is commonly used in preclinical studies, its clinical application is limited because of concerns regarding its cytotoxicity. Poly(β-amino ester)s are a new group of biodegradable and biocompatible cationic polymers that can be used for siRNA delivery. In this study, we synthesized Boc-protected and deprotected poly(β-amino ester)s, P(BSpBAE) and P(SpBAE), respectively, based on spermine and 1,4-butanediol diacrylate to deliver siRNA. The polymers were synthesized by Michael addition in a step-growth polymerization and characterized via 1H NMR spectroscopy and size-exclusion chromatography (SEC). The polymers can encapsulate siRNA as determined by SYBR gold assays. Both polymers and polyplexes were biocompatible in vitro. Furthermore, the cellular uptake of P(BSpBAE) and P(SpBAE) polyplexes was more efficient than for branched PEI (25 kDa) polyplexes at the same N/P ratios. P(BSpBAE) polyplexes achieved 60% eGFP knockdown in vitro, which indicates that the Boc-protection can improve the siRNA delivery and gene silencing efficiency of PBAEs. P(BSpBAE) polyplexes and P(SpBAE) polyplexes showed different cellular uptake mechanisms, and P(BSpBAE) polyplexes demonstrated decreased endosomal entrapment, which could explain why P(BSpBAE) polyplexes more efficiently mediated gene silencing than P(SpBAE) polyplexes. Furthermore, transfection of an siRNA against mutated KRAS in KRAS-mutated lung cancer cells led to around 35% (P(BspBAE)) to 45% (P(SpBAE)) inhibition of KRAS expression and around 33% (P(SpBAE)) to 55% (P(BspBAE)) decreased motility in a migration assay. These results suggest that the newly developed spermine-based poly(β-amino ester)s are promising materials for therapeutic siRNA delivery.

Branch Unit Distribution Matters for Gene Delivery

As a key nonviral gene therapy vector, poly(β-amino ester) (PAE) has demonstrated great potential for clinical application after two decades of development. However, even after extensive efforts in structural optimizations, including screening chemical composition, molecular weight (MW), terminal groups, and topology, their DNA delivery efficiency still lags behind that of viral vectors. To break through this bottleneck, in this work, a thorough investigation of highly branched PAEs (HPAEs) was conducted to correlate their fundamental internal structure with their gene transfection performance. We show that an essential structural factor, branch unit distribution (BUD), plays an important role for HPAE transfection capability and that HPAEs with a more uniform distribution of branch units display better transfection efficacy. By optimizing BUD, a high-efficiency HPAE that surpasses well-known commercial reagents (e.g., Lipofectamine 3000 (Lipo3000), jetPEI, and Xfect) can be generated. This work opens an avenue for the structural control and molecular design of high-performance PAE gene delivery vectors.

Unravelling the role of individual components in pBAE/polynucleotide polyplexes in the synthesis of tailored carriers for specific applications: on the road to rational formulations

Oligopeptide end-modified poly(β-amino ester)s (OM-pBAEs) offer a means for the effective implementation of gene therapeutics in the near future. A fine-tuning of OM-pBAEs to meet application requirements is achieved by the proportional balance of oligopeptides used and provide gene carriers with high transfection efficacy, low toxicity, precise targeting, biocompatibility, and biodegradability. Understanding the influence and conformation of each building block at molecular and biological levels is therefore pivotal for further development and improvement of these gene carriers. Herein, we unmask the role of individual OM-pBAE components and their conformation in OM-pBAE/polynucleotide nanoparticles using a combination of fluorescence resonance energy transfer, enhanced darkfield spectral microscopy, atomic force microscopy, and microscale thermophoresis. We found that modifying the pBAE backbone with three end-terminal amino acids produces unique mechanical and physical properties for each combination. Higher adhesion properties are seen with arginine and lysine-based hybrid nanoparticles, while histidine provides an advantage in terms of construct stability. Our results shed light on the high potential of OM-pBAEs as gene delivery vehicles and provide insights into the influence of the nature of surface charges and the chemical nature of the pBAE modifications on their paths towards endocytosis, endosomal escape, and transfection.

Poly(β-amino ester) Dual-Drug-Loaded Hydrogels with Antibacterial and Osteogenic Properties for Bone Repair

In this study, we developed a poly(β-amino ester) (PBAE) hydrogel for the double release of vancomycin (VAN) and total flavonoids of Rhizoma Drynariae (TFRD). VAN was covalently bonded to PBAE polymer chains and was released to enhance the antimicrobial effect first. TFRD chitosan (CS) microspheres were physically dispersed in the scaffold, TFRD was released from the microspheres, and osteogenesis was induced subsequently. The scaffold had good porosity (90.12 ± 3.27%), and the cumulative release rate of the two drugs in PBS (pH 7.4) solution exceeded 80%. In vitro antimicrobial assays demonstrated the antibacterial properties of the scaffold against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). Besides these, cell viability assays indicated that the scaffold had good biocompatibility. Moreover, alkaline phosphatase and matrix mineralization were expressed more than in the control group. Overall, cell experiments confirmed that the scaffolds have enhanced osteogenic differentiation capabilities. In conclusion, the dual-drug-loaded scaffold with antibacterial and bone regeneration effects is promising in the field of bone repair.

Improving anti-tumor efficacy of low-dose Vincristine in rhabdomyosarcoma via the combination therapy with FOXM1 inhibitor RCM1

Rhabdomyosarcoma (RMS) is a highly metastatic soft-tissue sarcoma that often develops resistance to current therapies, including vincristine. Since the existing treatments have not significantly improved survival, there is a critical need for new therapeutic approaches for RMS patients. FOXM1, a known oncogene, is highly expressed in RMS, and is associated with the worst prognosis in RMS patients. In the present study, we found that the combination treatment with specific FOXM1 inhibitor RCM1 and low doses of vincristine is more effective in increasing apoptosis and decreasing RMS cell proliferation in vitro compared to single drugs alone. Since RCM1 is highly hydrophobic, we developed innovative nanoparticle delivery system containing poly-beta-amino-esters and folic acid (NP^FA), which efficiently delivers RCM1 to mouse RMS tumors in vivo. The combination of low doses of vincristine together with intravenous administration of NP^FA nanoparticles containing RCM1 effectively reduced RMS tumor volumes, increased tumor cell death and decreased tumor cell proliferation in RMS tumors compared to RCM1 or vincristine alone. The combination therapy was non-toxic as demonstrated by liver metabolic panels using peripheral blood serum. Using RNA-seq of dissected RMS tumors, we identified Chac1 as a uniquely downregulated gene after the combination treatment. Knockdown of Chac1 in RMS cells in vitro recapitulated the effects of the combination therapy. Altogether, combination treatment with low doses of vincristine and nanoparticle delivery of FOXM1 inhibitor RCM1 in a pre-clinical model of RMS has superior anti-tumor effects and decreases CHAC1 while reducing vincristine toxicity.

Designing Synthetic Polymers for Nucleic Acid Complexation and Delivery: From Polyplexes to Micelleplexes to Triggered Degradation

Gene delivery as a therapeutic tool continues to advance toward impacting human health, with several gene therapy products receiving FDA approval over the past 5 years. Despite this important progress, the safety and efficacy of gene therapy methodology requires further improvement to ensure that nucleic acid therapeutics reach the desired targets while minimizing adverse effects. Synthetic polymers offer several enticing features as nucleic acid delivery vectors due to their versatile functionalities and architectures and the ability of synthetic chemists to rapidly build large libraries of polymeric candidates equipped for DNA/RNA complexation and transport. Current synthetic designs are pursuing challenging objectives that seek to improve transfection efficiency and, at the same time, mitigate cytotoxicity. This Perspective will describe recent work in polymer-based gene complexation and delivery vectors in which cationic polyelectrolytes are modified synthetically by introduction of additional components─including hydrophobic, hydrophilic, and fluorinated units─as well as embedding of degradable linkages within the macromolecular structure. As will be seen, recent advances employing these emerging design strategies are promising with respect to their excellent biocompatibility and transfection capability, suggesting continued promise of synthetic polymer gene delivery vectors going forward.

Helper-Polymer Based Five-Element Nanoparticles (FNPs) for Lung-Specific mRNA Delivery with Long-Term Stability after Lyophilization

Lipid nanoparticles (LNPs) carrying therapeutic mRNAs hold great promise in treating lung-associated diseases like viral infections, tumors, and genetic disorders. However, because of their thermodynamically unstable nature, traditional LNPs carrying mRNAs need to be stored at low temperatures, which hinders their prevalence. Herein, an efficient lung-specific mRNA delivery platform named five-element nanoparticles (FNPs) is developed in which helper-polymer poly(β-amino esters) (PBAEs) and DOTAP are used in combination. The new strategy endows FNPs with high stability by increasing the charge repulsion between nanoparticles and the binding force of the aliphatic chains within the nanoparticles. The structure-activity relationship (SAR) shows that PBAEs with E1 end-caps, higher degrees of polymerization, and longer alkyl side chains exhibit higher hit rates. Lyophilized FNP formulations can be stably stored at 4 °C for at least 6 months. Overall, a novel delivery platform with high efficiency, specificity, and stability was developed for advancing mRNA-based therapies for lung-associated diseases.

Delivery of Therapeutic miR-148b Mimic via Poly(β Amino Ester) Polyplexes for Post-transcriptional Gene Regulation and Apoptosis of A549 Cells

In this study, we utilized selectively modified, biodegradable polymer-based polyplexes to deliver custom, exogenous miR-148b mimics to induce apoptosis in human lung cancer (A549) cells. The gene regulatory effects of the payload miRNA mimics (miR-148b-3p) were first evaluated through bioinformatic analyses to uncover specific gene targets involved in critical carcinogenic pathways. Hyperbranched poly(β amino ester) polyplexes (hPBAE) loaded with custom miR-148b mimics were then developed for targeted therapy. When evaluated in vitro, these hPBAE-based polyplexes sustained high intracellular uptake, low cytotoxicity, and efficient escape from endosomes to deliver functionally intact miRNA mimics to the cytosol. High-resolution confocal microscopy revealed successful intracellular uptake, cell viability was assessed through qualitative fluorescence microscopy and fluorescence-based DNA quantification, and successful cytosolic delivery of intact miRNA mimics was evaluated using real-time polymerase chain reaction (RT-PCR) to demonstrate target gene knockdown. The hPBAE-miRNA mimic polyplexes were shown to induce apoptosis among A549 cells through direct modulation of intracellular protein expression, targeting multiple potential carcinogenic pathways at the gene level. These results indicated that spatially controlled miR-148b mimic delivery can promote efficient cancer cell death in vitro and may lead to an enhanced therapeutic design for in vivo application.

Effects of Kinetic Chain Length on the Degradation of Poly(β-amino ester)-Based Networks and Use in 3D Printing by Projection Microstereolithography

Poly(β-amino ester)-diacrylates (PBAE-dAs) are promising resins for three-dimensional (3D) printing. This study investigated the degradation of two PBAEs with different chemistries and kinetic chain lengths. PBAE-dA monomers were synthesized from benzhydrazide and poly(ethylene glycol) (A6) or butanediol (B6) diacrylate and then photopolymerized with pentaerythritol tetrakis(3-mercaptopropionate), which formed thiol-polyacrylate kinetic chains. This tetrathiol acts as a cross-linker and chain-transfer agent that controls the polyacrylate kinetic chain length. A6 networks exhibited bulk degradation, while B6 networks exhibited surface degradation, which transitioned to a combined surface and bulk degradation. Increasing the tetrathiol concentration shortened the polyacrylate kinetic chain and time-to-reverse gelation but degradation mode was unaffected. Hydrolysis occurred primarily through the β-amino ester. As network hydrophilicity increased, the slower degrading ester in the thiol-polyacrylate chains contributed to degradation. Overall, this work demonstrates control over network degradation rate, mode of degradation, and time-to-reverse gelation in PBAE networks and their application in 3D printing.

Digitally Programmable Manufacturing of Living Materials Grown from Biowaste

Material manufacturing strategies that use little energy, valorize waste, and result in degradable products are urgently needed. Strategies that transform abundant biomass into functional materials form one approach to these emerging manufacturing techniques. From a biological standpoint, morphogenesis of biological tissues is a "manufacturing" mode without energy-intensive processes, large carbon footprints, and toxic wastes. Inspired by biological morphogenesis, we propose a manufacturing strategy by embedding living Saccharomyces cerevisiae (Baker's yeast) within a synthetic acrylic hydrogel matrix. By culturing the living materials in media derived from bread waste, encapsulated yeast cells can proliferate, resulting in a dramatic dry mass and volume increase of the whole living material. After growth, the final material is up to 96 wt % biomass and 590% larger in volume than the initial object. By digitally programming the cell viability through UV irradiation or photodynamic inactivation, the living materials can form complex user-defined relief surfaces or 3D objects during growth. Ultimately, the grown structures can also be designed to be degradable. The proposed living material manufacturing strategy cultured from biowaste may pave the way for future ecologically friendly manufacturing of materials.

A Unique Core–Shell Structured, Glycol Chitosan-Based Nanoparticle Achieves Cancer-Selective Gene Delivery with Reduced Off-Target Effects

The inherent instability of nucleic acids within serum and the tumor microenvironment necessitates a suitable vehicle for non-viral gene delivery to malignant lesions. A specificity-conferring mechanism is also often needed to mitigate off-target toxicity. In the present study, we report a stable and efficient redox-sensitive nanoparticle system with a unique core–shell structure as a DNA carrier for cancer theranostics. Thiolated polyethylenimine (PEI-SH) is complexed with DNA through electrostatic interactions to form the core, and glycol chitosan-modified with succinimidyl 3-(2-pyridyldithio)propionate (GCS-PDP) is grafted on the surface through a thiolate-disulfide interchange reaction to form the shell. The resulting nanoparticles, GCS-PDP/PEI-SH/DNA nanoparticles (GNPs), exhibit high colloid stability in a simulated physiological environment and redox-responsive DNA release. GNPs not only show a high and redox-responsive cellular uptake, high transfection efficiency, and low cytotoxicity in vitro, but also exhibit selective tumor targeting, with minimal toxicity, in vivo, upon systemic administration. Such a performance positions GNPs as viable candidates for molecular-genetic imaging and theranostic applications.

Co-Delivery of p53 Restored and E7 Targeted Nucleic Acids by Poly (Beta-Amino Ester) Complex Nanoparticles for the Treatment of HPV Related Cervical Lesions

The p53 gene has the highest mutation frequency in tumors, and its inactivation can lead to malignant transformation, such as cell cycle arrest and apoptotic inhibition. Persistent high-risk human papillomavirus (HR-HPV) infection is the leading cause of cervical cancer. P53 was inactivated by HPV oncoprotein E6, promoting abnormal cell proliferation and carcinogenesis. To study the treatment of cervical intraepithelial neoplasia (CIN) and cervical cancer by restoring p53 expression and inactivating HPV oncoprotein, and to verify the effectiveness of nano drugs based on nucleic acid delivery in cancer treatment, we developed poly (beta-amino ester)537, to form biocompatible and degradable nanoparticles with plasmids (expressing p53 and targeting E7). In vitro and in vivo experiments show that nanoparticles have low toxicity and high transfection efficiency. Nanoparticles inhibited the growth of xenograft tumors and successfully reversed HPV transgenic mice’s cervical intraepithelial neoplasia. Our work suggests that the restoration of p53 expression and the inactivation of HPV16 E7 are essential for blocking the development of cervical cancer. This study provides new insights into the precise treatment of HPV-related cervical lesions.

Hydrolytically degradable Poly (β-amino ester) resins with tunable degradation for 3D printing by projection micro-stereolithography

Applications of 3D printing that range from temporary medical devices to environmentally responsible manufacturing would benefit from printable resins that yield polymers with controllable material properties and degradation behavior. Towards this goal, poly(β-amino ester) (PBAE)-diacrylate resins were investigated due to the wide range of available chemistries and tunable material properties. PBAE-diacrylate resins were synthesized from hydrophilic and hydrophobic chemistries and with varying electron densities on the ester bond to provide control over degradation. Hydrophilic PBAE-diacrylates led to degradation behaviors characteristic of bulk degradation while hydrophobic PBAE-diacrylates led to degradation behaviors dominated initially by surface degradation and then transitioned to bulk degradation. Depending on chemistry, the crosslinked PBAE-polymers exhibited a range of degradation times under accelerated conditions, from complete mass loss in 90 min to minimal mass loss at 45 days. Patterned features with 55 μm resolution were achieved across all resins, but their fidelity was dependent on PBAE-diacrylate molecular weight, reactivity, and printing parameters. In summary, simple chemical modifications in the PBAE-diacrylate resins coupled with projection microstereolithography enables high resolution 3D printed parts with similar architectures and initial properties, but widely different degradation rates and behaviors.

Complexing the Pre-assembled Brush-like siRNA with Poly(β-amino ester) for Efficient Gene Silencing

Small interfering RNA (siRNA) has been emerging as a highly selective and effective pharmaceutics for treating broad classes of diseases. However, the practical application of siRNA agent is often hampered by its poor crossing of the cellular membrane barrier and ineffective releasing from endosome to cytoplasm, leading to low gene silencing efficacy for clinical purposes. Thus far, cationic lipid and polymer-based vectors have been extensively explored for gene delivery. Yet condensing the rigid and highly negatively charged siRNA duplex to form a stable complex vehicle usually requires a large load of cationic carriers, prone to raising the toxicity issue for delivery. Herein, we develop a simple strategy that can efficiently condense the siRNAs into nanoparticle vehicles for target gene regulation. In this approach, we first employ a DNA-grafted polycaprolactone (DNA-g-PCL) brush as template to organize the small rigid siRNAs into a large brush-like structure (siRNA-brush) through nucleic acid hybridization. Then, the siRNA-brush assembly is condensed by an ionizable and biodegradable polymer (poly(β-amino ester), PBAE) under acidic buffer condition to form a stable nanoparticle for siRNA delivery. Compared to the free siRNAs with poor complexing capability with PBAE, the large brush-like siRNA assemblies with more complicated topological architecture significantly promotes their electrostatic interaction with PBAE, enabling the formation of complexed nanoparticles at low weight ratio of polymer to siRNA. Additionally, PBAE/siRNA-brush complexes exhibit good biocompatibility and stability under physiological condition, as well as enhanced cellular internalization. When equipped with functional siRNAs, the obtained delivery system demonstrates excellent downregulation of target genes both in vitro and in vivo, through which the progression of hypertrophic scars can be retarded with negligible adverse effects in an xenografted mouse model.

Double Networks of Liquid-Crystalline Elastomers with Enhanced Mechanical Strength

Liquid-crystalline elastomers (LCEs) are frequently used in soft actuator development. However, applications are limited because LCEs are prone to mechanical failure when subjected to heavy loads and high temperatures during the working cycle. A mechanically tough LCE system offers larger work capacity and lower failure rate for the actuators. Herein, we adopt the double-network strategy, starting with a siloxane-based exchangeable LCE and developing a series of double-network liquid-crystalline elastomers (DN-LCEs) that are mechanically tougher than the initial elastomer. We incorporate diacrylate reacting monomers to fabricate DN-LCEs, some of which have the breaking stress of 40 MPa. We incorporate thermoplastic polyurethane to fabricate a DN-LCE, achieving an enormous ductility of 90 MJ/m³. We have also attempted to utilize the aza-Michael chemistry to make a DN-LCE that retains high plasticity because of several bond-exchange mechanisms; however, it failed to produce a stable reprocessable LCE system using conventional ester-based reactive mesogens. Each of these DN-LCEs exhibits unique features and characteristics, which are compared and discussed.

Nanoparticles for Diagnosis and Target Therapy in Pediatric Brain Cancers

Pediatric brain tumors represent the most common types of childhood cancer and novel diagnostic and therapeutic solutions are urgently needed. The gold standard treatment option for brain cancers in children, as in adults, is tumor resection followed by radio- and chemotherapy, but with discouraging therapeutic results. In particular, the last two treatments are often associated to significant neurotoxicity in the developing brain of a child, with resulting disabilities such as cognitive problems, neuroendocrine, and neurosensory dysfunctions/deficits. Nanoparticles have been increasingly and thoroughly investigated as they show great promises as diagnostic tools and vectors for gene/drug therapy for pediatric brain cancer due to their ability to cross the blood–brain barrier. In this review we will discuss the developments of nanoparticle-based strategies as novel precision nanomedicine tools for diagnosis and therapy in pediatric brain cancers, with a particular focus on targeting strategies to overcome the main physiological obstacles that are represented by blood–brain barrier.

Polymer-based Non-viral Vectors for Gene Therapy in the Skin

Gene therapy has emerged as a versatile technique with the potential to treat a range of human diseases; however, examples of the topical application of gene therapy as a treatment...