Current Trends in In Vitro Modeling to Mimic Cellular Crosstalk in Periodontal Tissue

PTX3 promotes cementum formation and cementoblast differentiation via HA/ITGB1/FAK/YAP1 signaling pathway

Cementum is a vital component of periodontium, yet its regeneration remains a challenge. Pentraxin 3 (PTX3) is a multifunctional glycoprotein involved in extracellular matrix remodeling and bone metabolism regulation. However, the role of PTX3 in cementum formation and cementoblast differentiation has not been elucidated. In this study, we initially observed an increase in PTX3 expression during cementum formation and cementoblast differentiation. Then, overexpression of PTX3 significantly enhanced the differentiation ability of cementoblasts. While conversely, PTX3 knockdown exerted an inhibitory effect. Moreover, in Ptx3-deficient mice, we found that cementum formation was hampered. Furthermore, we confirmed the presence of PTX3 within the hyaluronan (HA) matrix, thereby activating the ITGB1/FAK/YAP1 signaling pathway. Notably, inhibiting any component of this signaling pathway partially reduced the ability of PTX3 to promote cementoblast differentiation. In conclusion, our study indicated that PTX3 promotes cementum formation and cementoblast differentiation, which is partially dependent on the HA/ITGB1/FAK/YAP1 signaling pathway. This research will contribute to our understanding of cementum regeneration after destruction.

Engineered 3D Periodontal Ligament Model with Magnetic Tensile Loading

In vitro models are invaluable tools for deconstructing the biological complexity of the periodontal ligament (PDL). Model systems that closely reproduce the 3-dimensional (3D) configuration of cell-cell and cell-matrix interactions in native tissue can deliver physiologically relevant insights. However, 3D models of the PDL that incorporate mechanical loading are currently lacking. Hence, we developed a model where periodontal tissue constructs (PTCs) are made by casting PDL cells in a collagen gel suspended between a pair of slender, silicone posts for magnetic tensile loading. Specifically, one of the posts was rigid and the other was flexible with a magnet embedded in its tip so that PTCs could be subjected to tensile loading with an external magnet. Additionally, the deflection of the flexible post could be used to measure the contractile force of PDL cells in the PTCs. Prior to tensile loading, second harmonics generation analysis of collagen fibers in PTCs revealed that incorporation of PDL cells resulted in collagen remodeling. Biomechanical testing of PTCs by tensile loading revealed an elastic response at 4 h, permanent deformation by 1 d, and creep elongation by 1 wk. Subsequently, contractile forces of PDL cells were substantially lower for PTCs under tensile loading. Immunofluorescence analysis revealed that tensile loading caused PDL cells to increase in number, express higher levels of F-actin and α-smooth muscle actin, and become aligned to the tensile axis. Second harmonics generation analysis indicated that collagen fibers in PTCs progressively remodeled over time with tensile loading. Gene expression analysis also confirmed tension-mediated upregulation of the F-actin/Rho pathway and osteogenic genes. Our model is novel in demonstrating the mechanobiological behavior that results in cell-mediated remodeling of the PDL tissue in a 3D context. Hence, it can be a valuable tool to develop therapeutics for periodontitis, periodontal regeneration, and orthodontics.

Modeling of the brain-lung axis using organoids in traumatic brain injury: an updated review

Clinical outcome after traumatic brain injury (TBI) is closely associated conditions of other organs, especially lungs as well as degree of brain injury. Even if there is no direct lung damage, severe brain injury can enhance sympathetic tones on blood vessels and vascular resistance, resulting in neurogenic pulmonary edema. Conversely, lung damage can worsen brain damage by dysregulating immunity. These findings suggest the importance of brain-lung axis interactions in TBI. However, little research has been conducted on the topic. An advanced disease model using stem cell technology may be an alternative for investigating the brain and lungs simultaneously but separately, as they can be potential candidates for improving the clinical outcomes of TBI.In this review, we describe the importance of brain-lung axis interactions in TBI by focusing on the concepts and reproducibility of brain and lung organoids in vitro. We also summarize recent research using pluripotent stem cell-derived brain organoids and their preclinical applications in various brain disease conditions and explore how they mimic the brain-lung axis. Reviewing the current status and discussing the limitations and potential perspectives in organoid research may offer a better understanding of pathophysiological interactions between the brain and lung after TBI.

Periodontal ligament and alveolar bone remodeling during long orthodontic tooth movement analyzed by a novel user-independent 3D-methodology

The structural process of bone and periodontal ligament (PDL) remodeling during long-term orthodontic tooth movement (OTM) has not been satisfactorily described yet. Although the mechanism of bone changes in the directly affected alveolar bone has been deeply investigated, detailed knowledge about specific mechanism of PDL remodeling and its interaction with alveolar bone during OTM is missing. This work aims to provide an accurate and user-independent analysis of the alveolar bone and PDL remodeling following a prolonged OTM treatment in mice. Orthodontic forces were applied using a Ni-Ti coil-spring in a split-mouth mice model. After 5 weeks both sides of maxillae were scanned by high-resolution micro-CT. Following a precise tooth movement estimation, an extensive 3D analysis of the alveolar bone adjacent to the first molar were performed to estimate the morphological and compositional parameters. Additionally, changes of PDL were characterized by using a novel 3D model approach. Bone loss and thinning, higher connectivity as well as lower bone mineral density were found in both studied regions. Also, a non-uniformly widened PDL with increased thickness was observed. The extended and novel methodology in this study provides a comprehensive insight about the alveolar bone and PDL remodeling process after a long-duration OTM.

Personalized 3D-Printed Scaffolds with Multiple Bioactivities for Bioroot Regeneration

Recent advances in 3D printing offer a prospective avenue for producing transplantable human tissues with complex geometries; however, the appropriate 3D-printed scaffolds possessing the biological compatibility for tooth regeneration remain unidentified. This study proposes a personalized scaffold of multiple bioactivities, including induction of stem cell proliferation and differentiation, biomimetic mineralization, and angiogenesis. A brand-new bioink system comprising a biocompatible and biodegradable polymer is developed and reinforced with extracellular matrix generated from dentin tissue (treated dentin matrix, TDM). Adding TDM optimizes physical properties including microstructure, hydrophilicity, and mechanical strength of the scaffolds. Proteomics analysis reveals that the released proteins of the 3D-printed TDM scaffolds relate to multiple biological processes and interact closely with each other. Additionally, 3D-printed TDM scaffolds establish a favorable microenvironment for cell attachment, proliferation, and differentiation in vitro. The 3D-printed TDM scaffolds are proangiogenic and facilitate whole-thickness vascularization of the graft in a subcutaneous model. Notably, the personalized TDM scaffold combined with dental follicle cells mimics the anatomy and physiology of the native tooth root three months after in situ transplantation in beagles. The remarkable in vitro and in vivo outcomes suggest that the 3D-printed TDM scaffolds have multiple bioactivities and immense clinical potential for tooth-loss therapy.

A New Way to Model Periodontitis in Laboratory Animals

The prevalence of periodontal diseases is increasing, tends to increase with age and is considered as one of the main causes of tooth loss. To assess the effectiveness of new methods of treatment of periodontal diseases, studies on laboratory animals can be promising.

THE AIM OF THE STUDY

to develop a new method of accelerated modeling of experimental periodontitis on laboratory animals.

MATERIAL AND METHODS

The study was carried out on 22 female rats. A wire ligature was applied to the cervical area of the incisors of the animals in an eight-shaped manner. Plaque obtained from a patient with periodontitis was placed under the wire, and nicotine and ethyl alcohol solutions were injected under the gingival mucosa. A complex index has been proposed to assess inflammation. At the end of the experiment the animals were euthanized, their jaws were dissected into dentoalveolar blocks and further descriptive histologic analysis was performed.

RESULTS

On the second day the gingiva of the rats acquired a cyanotic-pink color, on the fourth day the consistency of the gingiva became friable, mobility appeared in the lower incisors. Complex index of inflammation in animals of the main group: before the study-9, on the 7th day-195. Gingival preparations showed signs of exudative inflammation. In alveolar processes-irreversible resorption of bone structures. The difference of indicators in animals before and after the experiment was statistically significant (p < 0.05).

CONCLUSION

The new experimental model of periodontitis is reproduced in a short period of time, provides intensive development of inflammation, leads to disruption of the integrity of epithelial and connective tissue attachment, destruction of alveolar bone.

Transformative Materials to Create 3D Functional Human Tissue Models In Vitro in a Reproducible Manner

Recreating human tissues and organs in the petri dish to establish models as tools in biomedical sciences has gained momentum. These models can provide insight into mechanisms of human physiology, disease onset, and progression, and improve drug target validation, as well as the development of new medical therapeutics. Transformative materials play an important role in this evolution, as they can be programmed to direct cell behavior and fate by controlling the activity of bioactive molecules and material properties. Using nature as an inspiration, scientists are creating materials that incorporate specific biological processes observed during human organogenesis and tissue regeneration. This article presents the reader with state-of-the-art developments in the field of in vitro tissue engineering and the challenges related to the design, production, and translation of these transformative materials. Advances regarding (stem) cell sources, expansion, and differentiation, and how novel responsive materials, automated and large-scale fabrication processes, culture conditions, in situ monitoring systems, and computer simulations are required to create functional human tissue models that are relevant and efficient for drug discovery, are described. This paper illustrates how these different technologies need to converge to generate in vitro life-like human tissue models that provide a platform to answer health-based scientific questions.

Dissecting specific Wnt components governing osteogenic differentiation potential by human periodontal ligament stem cells through interleukin-6

Periodontal ligament stem cells (PDLSCs) play a significant role on periodontal tissue and alveolar bone homeostasis. During inflammation, interleukin (IL)-6 serves as one of key cytokine players controlling tissue reaction as well as alveolar bone tissue remodeling. It is believed that periodontal tissue inflammation causes periodontium degradation, especially alveolar bone. However, in this study, we show that an inflammatory mediator, IL-6, may serve another direction on alveolar bone homeostasis during inflammatory condition. We found that, IL-6 at 10 and 20 ng/mL was not cytotoxic and dose-dependently exerted beneficial effects on osteogenic differentiation of human PDLSCs (hPDLSCs), as demonstrated by increased alkaline phosphatase activity, mRNA expression of osteogenic markers, and matrix mineralization. The presence of physiological and inflammatory level of IL-6, the osteogenic differentiation potential by hPDLSCs was enhanced by several possible mechanisms including transforming growth factor (TGF), Wnt, and Notch pathways. After in-depth and thorough exploration, we found that Wnt pathway serves as key regulator controlling osteogenic differentiation by hPDLSCs amid the IL-6 presentation. Surprisingly, apart from other mesenchymal stem cells, distinct Wnt components are employed by hPDLSCs, and both canonical and non-canonical Wnt pathways are triggered by different mechanisms. Further validation by gene silencing, treatment with recombinant Wnt ligands, and β-catenin stabilization/translocation confirmed that IL-6 governed the canonical Wnt/β-catenin pathway via either WNT2B or WNT10B and employed WNT5A to activate the non-canonical Wnt pathway. These findings fulfill the homeostasis pathway governing periodontal tissue and alveolar bone regeneration and may serve for further therapeutic regimen design for restoring the tissues.

The Contribution of the Nrf2/ARE System to Mechanotransduction in Musculoskeletal and Periodontal Tissues

Mechanosensing plays an essential role in maintaining tissue functions. Across the human body, several tissues (i.e., striated muscles, bones, tendons, ligaments, as well as cartilage) require mechanical loading to exert their physiological functions. Contrary, mechanical unloading triggers pathological remodeling of these tissues and, consequently, human body dysfunctions. At the cellular level, both mechanical loading and unloading regulate a wide spectrum of cellular pathways. Among those, pathways regulated by oxidants such as reactive oxygen species (ROS) represent an essential node critically controlling tissue organization and function. Hence, a sensitive balance between the generation and elimination of oxidants keeps them within a physiological range. Here, the Nuclear Factor-E2-related factor 2/Antioxidant response element (Nrf2/ARE) system plays an essential role as it constitutes the major cellular regulation against exogenous and endogenous oxidative stresses. Dysregulations of this system advance, i.a., liver, neurodegenerative, and cancer diseases. Herein, we extend our comprehension of the Nrf2 system to the aforementioned mechanically sensitive tissues to explore its role in their physiology and pathology. We demonstrate the relevance of it for the tissues' functionality and highlight the imperative to further explore the Nrf2 system to understand the physiology and pathology of mechanically sensitive tissues in the context of redox biology.

Recent Advances on Electrospun Nanofibers for Periodontal Regeneration

Periodontitis is an inflammatory infection caused by bacterial plaque accumulation that affects the periodontal tissues. Current treatments lack bioactive signals to induce tissue repair and coordinated regeneration of the periodontium, thus alternative strategies are needed to improve clinical outcomes. Electrospun nanofibers present high porosity and surface area and are able to mimic the natural extracellular matrix, which modulates cell attachment, migration, proliferation, and differentiation. Recently, several electrospun nanofibrous membranes have been fabricated with antibacterial, anti-inflammatory, and osteogenic properties, showing promising results for periodontal regeneration. Thus, this review aims to provide an overview of the current state of the art of these nanofibrous scaffolds in periodontal regeneration strategies. First, we describe the periodontal tissues and periodontitis, as well as the currently available treatments. Next, periodontal tissue engineering (TE) strategies, as promising alternatives to the current treatments, are addressed. Electrospinning is briefly explained, the characteristics of electrospun nanofibrous scaffolds are highlighted, and a detailed overview of electrospun nanofibers applied to periodontal TE is provided. Finally, current limitations and possible future developments of electrospun nanofibrous scaffolds for periodontitis treatment are also discussed.

Oral cavity-derived stem cells and preclinical models of jaw-bone defects for bone tissue engineering

BACKGROUND

Jaw-bone defects caused by various diseases lead to aesthetic and functional complications, which can seriously affect the life quality of patients. Current treatments cannot fully meet the needs of reconstruction of jaw-bone defects. Thus, the research and application of bone tissue engineering are a "hot topic." As seed cells for engineering of jaw-bone tissue, oral cavity-derived stem cells have been explored and used widely. Models of jaw-bone defect are excellent tools for the study of bone defect repair in vivo. Different types of bone defect repair require different stem cells and bone defect models. This review aimed to better understand the research status of oral and maxillofacial bone regeneration.

MAIN TEXT

Data were gathered from PubMed searches and references from relevant studies using the search phrases "bone" AND ("PDLSC" OR "DPSC" OR "SCAP" OR "GMSC" OR "SHED" OR "DFSC" OR "ABMSC" OR "TGPC"); ("jaw" OR "alveolar") AND "bone defect." We screened studies that focus on "bone formation of oral cavity-derived stem cells" and "jaw bone defect models," and reviewed the advantages and disadvantages of oral cavity-derived stem cells and preclinical model of jaw-bone defect models.

CONCLUSION

The type of cell and animal model should be selected according to the specific research purpose and disease type. This review can provide a foundation for the selection of oral cavity-derived stem cells and defect models in tissue engineering of the jaw bone.

Substrate Stiffness Regulates the Proliferation and Apoptosis of Periodontal Ligament Cells through Integrin-Linked Kinase ILK

The hallmark of orthodontic tooth movement (OTM) is time-consuming during clinical treatments. The acceleration of OTM through modulating proliferation and apoptosis of periodontal ligament cells (PDLCs) possesses the potential application in clinical treatments. Here, we established an in vitro model with a graded increase in substrate stiffness to investigate the underlying mechanism of proliferation and apoptosis of PDLCs. The role of the integrin-linked kinase (ILK) in response to substrate stiffness was investigated by the depletion model of PDLCs. We found that the proliferation and apoptosis of PDLCs show a stiffness-dependent property with stiffer substrates favoring increased bias at the transcript level. Depleting integrin-linked kinase diluted the correlation between PDLCs behaviors and substrate stiffness. Our results suggest that ILK plays a significant role in modulating PDLC proliferation and apoptosis and can serve as a potential target for accelerating OTM.

LRP6/filamentous-actin signaling facilitates osteogenic commitment in mechanically induced periodontal ligament stem cells

BACKGROUND

Mechanotransduction mechanisms whereby periodontal ligament stem cells (PDLSCs) translate mechanical stress into biochemical signals and thereby trigger osteogenic programs necessary for alveolar bone remodeling are being deciphered. Low-density lipoprotein receptor-related protein 6 (LRP6), a Wnt transmembrane receptor, has been qualified as a key monitor for mechanical cues. However, the role of LRP6 in the mechanotransduction of mechanically induced PDLSCs remains obscure.

METHODS

The Tension System and tooth movement model were established to determine the expression profile of LRP6. The loss-of-function assay was used to investigate the role of LRP6 on force-regulated osteogenic commitment in PDLSCs. The ability of osteogenic differentiation and proliferation was estimated by alkaline phosphatase (ALP) staining, ALP activity assay, western blotting, quantitative real-time PCR (qRT-PCR), and immunofluorescence. Crystalline violet staining was used to visualize cell morphological change. Western blotting, qRT-PCR, and phalloidin staining were adopted to affirm filamentous actin (F-actin) alteration. YAP nucleoplasmic localization was assessed by immunofluorescence and western blotting. YAP transcriptional response was evaluated by qRT-PCR. Cytochalasin D was used to determine the effects of F-actin on osteogenic commitment and YAP switch behavior in mechanically induced PDLSCs.

RESULTS

LRP6 was robustly activated in mechanically induced PDLSCs and PDL tissues. LRP6 deficiency impeded force-dependent osteogenic differentiation and proliferation in PDLSCs. Intriguingly, LRP6 loss caused cell morphological aberration, F-actin dynamics disruption, YAP nucleoplasmic relocation, and subsequent YAP inactivation. Moreover, disrupted F-actin dynamics inhibited osteogenic differentiation, proliferation, YAP nuclear translocation, and YAP activation in mechanically induced PDLSCs.

CONCLUSIONS

We identified that LRP6 in PDLSCs acted as the mechanosensor regulating mechanical stress-inducible osteogenic commitment via the F-actin/YAP cascade. Targeting LRP6 for controlling alveolar bone remodeling may be a prospective therapy to attenuate relapse of orthodontic treatment.

[68Ga]Ga-Pentixafor and Sodium [18F]Fluoride PET Can Non-Invasively Identify and Monitor the Dynamics of Orthodontic Tooth Movement in Mouse Model

The cellular and molecular mechanisms of orthodontic tooth movement (OTM) are not yet fully understood, partly due to the lack of dynamical datasets within the same subject. Inflammation and calcification are two main processes during OTM. Given the high sensitivity and specificity of [⁶⁸Ga]Ga-Pentixafor and Sodium [¹⁸F]Fluoride (Na[¹⁸F]F) for inflammation and calcification, respectively, the aim of this study is to assess their ability to identify and monitor the dynamics of OTM in an established mouse model. To monitor the processes during OTM in real time, animals were scanned using a small animal PET/CT during week 1, 3, and 5 post-implantation, with [⁶⁸Ga]Ga-Pentixafor and Na[¹⁸F]F. Both tracers showed an increased uptake in the region of interest compared to the control. For [⁶⁸Ga]Ga-Pentixafor, an increased uptake was observed within the 5-week trial, suggesting the continuous presence of inflammatory markers. Na[¹⁸F]F showed an increased uptake during the trial, indicating an intensification of bone remodelling. Interim and end-of-experiment histological assessments visualised increased amounts of chemokine receptor CXCR4 and TRAP-positive cells in the periodontal ligament on the compression side. This approach establishes the first in vivo model for periodontal remodelling during OTM, which efficiently detects and monitors the intricate dynamics of periodontal ligament.

Mechanical Compression by Simulating Orthodontic Tooth Movement in an In Vitro Model Modulates Phosphorylation of AKT and MAPKs via TLR4 in Human Periodontal Ligament Cells

Mechanical compression simulating orthodontic tooth movement in in vitro models induces pro-inflammatory cytokine expression in periodontal ligament (PDL) cells. Our previous work shows that TLR4 is involved in this process. Here, primary PDL cells are isolated and characterized to better understand the cell signaling downstream of key molecules involved in the process of sterile inflammation via TLR4. The TLR4 monoclonal blocking antibody significantly reverses the upregulation of phospho-AKT, caused by compressive force, to levels comparable to controls by inhibition of TLR4. Phospho-ERK and phospho-p38 are also modulated in the short term via TLR4. Additionally, moderate compressive forces of 2 g/cm², a gold standard for static compressive mechanical stimulation, are not able to induce translocation of Nf-kB and phospho-ERK into the nucleus. Accordingly, we demonstrated for the first time that TLR4 is also one of the triggers for signal transduction under compressive force. The TLR4, one of the pattern recognition receptors, is involved through its specific molecular structures on damaged cells during mechanical stress. Our findings provide the basis for further research on TLR4 in the modulation of sterile inflammation during orthodontic therapy and periodontal remodeling.

Challenges and tissue engineering strategies of periodontal guided tissue regeneration

Periodontitis is a chronic infectious oral disease with a high prevalence rate in the world, and is a major cause of tooth loss. Nowadays, people have realized that the local microenvironment that includes proteins, cytokines, and extracellular matrix has a key influence on the functions of host immune cells and periodontal ligament stem cells during a chronic infectious disease such as periodontitis. The above pathological process of periodontitis will lead to a defect of periodontal tissues. Through the application of biomaterials, biological agents, and stem cells therapy, guided tissue regeneration (GTR) makes it possible to reconstruct healthy periodontal ligament tissue after local inflammation control. To date, substantial advances have been made in periodontal guided tissue regeneration. However, the process of periodontal remodeling experiences complex microenvironment changes, and currently periodontium regeneration still remains to be a challenging feat. In this review, we summarized the main challenges in each stage of periodontal regeneration, and try to put forward appropriate biomaterial treatment mechanisms or potential tissue engineering strategies that provide a theoretical basis for periodontal tissue engineering regeneration research.

Shear Stress Enhances the Paracrine-Mediated Immunoregulatory Function of Human Periodontal Ligament Stem Cells via the ERK Signalling Pathway

Relevant immunomodulatory effects have been proposed following allogeneic cell-based therapy with human periodontal ligament stem cells (hPDLSCs). This study aimed to examine the influence of shear stress on the immunosuppressive capacity of hPDLSCs. Cells were subjected to shear stress at different magnitudes (0.5, 5 and 10 dyn/cm2). The expression of immunosuppressive markers was evaluated in shear stress-induced hPDLSCs using qRT-PCR, western blot, enzyme activity and enzyme-linked immunosorbent assays. The effects of a shear stress-derived condition medium (SS-CM) on T cell proliferation were examined using a resazurin assay. Treg differentiation was investigated using qRT-PCR and flow cytometry analysis. Our results revealed that shear stress increased mRNA expression of IDO and COX2 but not TGF-β1 and IFN-γ. IDO activity, kynurenine and active TGF-β1 increased in SS-CM when compared to the non-shear stress-derived conditioned medium (CTL-CM). The amount of kynurenine in SS-CM was reduced in the presence of cycloheximide and ERK inhibitor. Subsequently, T cell proliferation decreased in SS-CM compared to CTL-CM. Treg differentiation was promoted in SS-CM, indicated by FOXP3, IL-10 expression and CD4+CD25hiCD127lo/− subpopulation. In conclusion, shear stress promotes kynurenine production through ERK signalling in hPDLSC, leading to the inhibition of T cell proliferation and the promotion of Treg cell differentiation.

Novel In Situ-Cross-Linked Electrospun Gelatin/Hydroxyapatite Nonwoven Scaffolds Prove Suitable for Periodontal Tissue Engineering

Periodontal diseases affect millions of people worldwide and can result in tooth loss. Regenerative treatment options for clinical use are thus needed. We aimed at developing new nonwoven-based scaffolds for periodontal tissue engineering. Nonwovens of 16% gelatin/5% hydroxyapatite were produced by electrospinning and in situ glyoxal cross-linking. In a subset of scaffolds, additional porosity was incorporated via extractable polyethylene glycol fibers. Cell colonization and penetration by human mesenchymal stem cells (hMSCs), periodontal ligament fibroblasts (PDLFs), or cocultures of both were visualized by scanning electron microscopy and 4′,6-diamidin-2-phenylindole (DAPI) staining. Metabolic activity was assessed via Alamar Blue^® staining. Cell type and differentiation were analyzed by immunocytochemical staining of Oct4, osteopontin, and periostin. The electrospun nonwovens were efficiently populated by both hMSCs and PDLFs, while scaffolds with additional porosity harbored significantly more cells. The metabolic activity was higher for cocultures of hMSCs and PDLFs, or for PDLF-seeded scaffolds. Periostin and osteopontin expression was more pronounced in cocultures of hMSCs and PDLFs, whereas Oct4 staining was limited to hMSCs. These novel in situ-cross-linked electrospun nonwoven scaffolds allow for efficient adhesion and survival of hMSCs and PDLFs. Coordinated expression of differentiation markers was observed, which rendered this platform an interesting candidate for periodontal tissue engineering.

Outside the limits of bacterial viability: postbiotics in the management of periodontitis

Periodontitis is a major cause of tooth loss in adults worldwide and is caused by an unbalanced oral microbiota in a susceptible host, ultimately leading to tissue breakdown and bone loss. Traditionally, the treatment for periodontitis is scaling and root planing; however, some cases require adjuvant therapy, such as antibiotics administration or surgery. Various factors are involved in the pathogenesis and interact in an unpredictable way, increasing the complexity of the disease and making it difficult to manage. In this context, the administration of probiotics aimed at resolving bacterial dysbiosis and the associated dysregulation of the immune system has been employed in clinical trials with encouraging results. However, the use of viable microorganisms is not risk-free, and immunocompromised patients may develop adverse effects. Therefore, the use of inactivated microbial cells, cell fractions, or soluble products and metabolites of probiotics, known as postbiotics, has gained increasing attention. In this commentary, we present the current literature assessing the impact of postbiotics on the growth and metabolism of periodontal pathogens, as well as on the progression of periodontitis in rodents and humans. We also discuss the limitations of the available data and what the scientific community should consider in order to transfer this innovative therapeutic modality from the bench to the bedside.

Sclerostin in Periodontal Ligament: Homeostatic Regulator in Biophysical Force-Induced Tooth Movement

AIM

This study elucidates the role of sclerostin in periodontal ligament (PDL) as a homeostatic regulator in biophysical force-induced tooth movement (BFTM).

MATERIALS AND METHODS

BFTM was performed in rats, followed by microarray, immunofluorescence, in situ hybridization, and real-time PCR for detection and identification of the molecules. The periodontal space was analyzed via micro-computed tomography. Effects on osteoclastogenesis and bone resorption were evaluated in mouse bone marrow-derived cells. In vitro human PDL cells were subjected to biophysical forces.

RESULTS

In the absence of BFTM, sclerostin was hardly detected in the periodontium except the PDL and alveolar bone in the furcation region and apex of the molar roots. However, sclerostin was upregulated in the PDL in vivo by adaptable force, which induced typical transfiguration without changes in periodontal space as well as in vitro PDL cells under compression and tension. In contrast, the sclerostin level was unaffected by heavy force, which caused severe degeneration of the PDL and narrowed periodontal space. Sclerostin inhibited osteoclastogenesis and bone resorption, which corroborates the accelerated tooth movement by the heavy force.

CONCLUSIONS

Sclerostin in PDL may be a key homeostatic molecule in the periodontium and a biological target for the therapeutic modulation of BFTM. This article is protected by copyright. All rights reserved.

Ckip-1 Mediates P. gingivalis-Suppressed Cementoblast Mineralization

Porphyromonas gingivalis is responsible for the destruction of cementum in patients with periodontitis and periapical periodontitis. However, research about the effects of P. gingivalis on cementoblast mineralization and the underlying mechanism is still lacking. Casein kinase 2 interacting protein 1 (Ckip-1) is a scaffold protein that interacts with various proteins and signals to regulate different cell functions, such as cell morphology, apoptosis, and differentiation. In this study, we verified the suppressive effects of P. gingivalis and lipopolysaccharide (Pg-LPS) on OCCM-30 mineralization. We also showed that Ckip-1 gradually decreased during OCCM-30 mineralization but increased with the aggravation of Pg-induced inflammation. However, it remained unchanged when cells were stimulated with Pg-LPS, regardless of the concentration and incubation time. Then, more cellular cementum and enhanced Osterix expression were observed in Ckip-1 knockout mice when compared with the wild-type mice. Meanwhile, Ckip-1 silencing significantly enhanced cementoblast mineralization with or without P. gingivalis-associated inflammation. The trend was opposite when Ckip-1 was overexpressed. Finally, we found that the p38, Akt, and Wnt pathways were activated, while the Erk1/2 pathway was inhibited when Ckip-1 was silenced. The opposite results were also observed in the Ckip-1 overexpression group. Furthermore, we proved that cell mineralization was weakened when p38, Akt inhibitors were applied and strengthened when the Erk1/2 pathway was inhibited. In summary, Ckip-1 is upregulated underP. gingivalis-induced inflammation and negatively regulates cementoblast mineralization partially through mitogen-activated protein kinases and Akt signaling pathways, which may contribute to the restoration of cementum destroyed by P. gingivalis.

Consensus report of the joint workshop of the Italian Society of Diabetology, Italian Society of Periodontology and Implantology, Italian Association of Clinical Diabetologists (SID-SIdP-AMD)

Periodontitis has been defined as the Sixth complication of Diabetes Mellitus. Since both diabetes mellitus and periodontitis have a high prevalence in the general population, the Italian Society of Diabetology, the Italian Society of Periodontology and Implantology and the Italian Association of Clinical Diabetologists revised the present scientific literature in the present consensus report. A bi-directional interaction was demonstrated: Patients affected by type 1 and type 2 diabetes have a higher prevalence of periodontitis than the general population, due to several metabolic factors (e.g. chronic hyperglycemia, autoimmunity, dietary and life-style factors); similarly, periodontitis predisposes to type 2 diabetes mellitus mainly via the increase of systemic cytokines release. Conversely, improvement of metabolic control of diabetic patients delay the progression of periodontitis as well as periodontitis treatment reduces glycosylated hemoglobin levels in blood. Due to the bi-directional causal interaction between periodontitis and diabetes mellitus, a strict collaboration among dentists and diabetologists is required and strongly recommended. The inter-societies consensus proposes specific flow-diagrams to improve the treatment of patients and management of the general population regarding the issue of periodontitis and diabetes.

What do we know about the mechanisms of action of probiotics on factors involved in the pathogenesis of periodontitis? A scoping review of in vitro studies

OBJECTIVE

Probiotics are increasingly used in oral prevention and treatment conditions, but little is known about their abilities. The aim of this review is to clarify, summarize and disseminate current knowledge about the mode of action of in vitro probiotics on factors involved in the pathogenesis of periodontitis.

METHOD

2495 articles were identified in three databases (Medline, Web of Science, SpringerLink) and 26 studies included in this scoping review.

RESULTS

Twenty-three probiotic species were identified, the majority of which were Lactobacilli or Bifidobacteria. Lactobacillus rhamnosus (30.8 %) and Lactobacillus reuteri (42.3 %) were found to be the two predominantly studied probiotic species and three main mechanisms of action of probiotics could be classified as: (i) modulation of the immuno-inflammatory response, (ii) direct actions of probiotics on periodontopathogens by adhesion or nutritive competitions and/or the secretion of antimicrobial molecules and (iii) indirect actions through environmental modifications. A combination of several probiotic strains seems to be beneficial via synergistic action amplifying the functions of each strain used. However, heterogeneity of the methodologies and probiotic species included in studies leads us to consider the following avenues for future research: (i) implementation of standardized periodontal models as close as possible to in vivo periodontal conditions to identify the functions of each strain for appropriate medication, (ii) updating data about interactions within oral biofilms to identify new candidates and to predict then analyze their behavior within these biofilms.

CONCLUSION

Probiotics may have their place in the response to inter-individual variability in periodontitis, provided that the choice of the probiotic strain or combination of them will be personalized and optimal for each patient.