Mechanoresponsive Luminescent Molecular Assemblies: An Emerging Class of Materials

Terminal halogen-containing rod-like liquid crystals: Synthesis, self-assembly, photophysical and mechanochromism properties

Five series of cyanostilbene-based rod-like liquid crystals containing one different terminal atom (H, F, Cl, Br and I) at one end and one terminal aliphatic chain with different numbers of carbon atoms at the other end were reported by Suzuki coupling and Knoevenagel reactions. The influence of terminal halogen atoms and terminal chain length on the self-assembly, AIE behavior, temperature-dependent emission and mechanochromism behavior was explored by POM, DSC, XRD, SEM, absorption spectra and emission spectra. All the compounds are enantiotropic liquid crystals. The lowest non-halogen substituted homologue exhibited solo N phase, but the higher non-halogen substituted homologues exhibited mesogenic transition from SmA phase to N phase upon rising temperature. All the lowest halogen substituted homologues exhibited mesogenic transition from SmA phase to N phase upon rising temperature and all the higher homologues only exhibited SmA. The distinct mesogenic phase transition could be attributed to the intermolecular interaction produced by terminal halogen and the rigidity of the terminal aliphatic chain. All the non-halogen substituted compounds and halogen substituted compounds with smaller terminal halogen atom (F, Cl and Br atom) exhibited AIE behaviors, whereas the iodinated compounds exhibited extremely weak emission in solution and aggregated states due to the heavy atoms effect. These compounds also exhibited distinct solid-state emission with blue or cyan fluorescence, which could be quenched by increasing temperature. The reversible mechanochromism behavior was also achieved in all the compounds. The mechanical force induced quench in emission in non-halogen substituted compounds and halogen substituted compounds with smaller terminal halogen atom (F, Cl and Br atom), whereas enhancement in iodinated compounds. The reversible mechanochromism behavior endowed these compounds with potential applications in rewritable paper and anti-counterfeiting. The interesting properties in these liquid crystals would be attributed to the balance of the halogen-halogen interactions, heavy atom effect, steric-hindrance effect and chain length. These investigations would be helpful to understand the relationship between chemical structures and properties.

Dual-Stimuli-Responsive Turn-On Luminescence of Chiral Bisimidazolyl BINOL Dimethyl Ether Crystals

Stimuli-responsive organic luminescent crystals have attracted significant attention in recent years for their potential in sensor and memory applications. While turn-on luminescence is superior in detection sensitivity compared with turn-off luminescence, the development of organic crystals that exhibit turn-on luminescence in response to multiple stimuli remains a significant challenge. Herein, the crystals of chiral bisimidazolyl 1,1'-bi-2-naphthol (BINOL) dimethyl ether have exhibited a dual-stimuli-responsive turn-on luminescence based on two distinct mechanisms. In the crystalline state, luminescence was substantially quenched by the intermolecular hydrogen bonds between the imidazole rings. Mechanical stimulation induced a transition to a blue-violet-emissive amorphous state. In contrast, thermal stimulation produced an orange luminescence, attributed to excited-state intramolecular proton transfer (ESIPT) luminescence from thermally demethylated products. Furthermore, the thermally induced state exhibited circularly polarized luminescence (CPL), marking a rare instance of stimuli-responsive turn-on CPL in a solid-state system. This study provides new insights into environmental and structural factors for solid-state luminescent properties and advances the design guidelines for multifunctional luminescent sensors.

Cascading responses of stimuli-responsive materials

Responsiveness to stimuli is important in daily life: natural biological activity is governed by continuous stimulus responsiveness. The design of stimuli-responsive materials is required for the development of advanced sensing systems. Although fully controlled stimuli-responsive systems have been constructed in nature, artificial systems remain a challenge. Conventional stimuli-responsive materials show direct responsiveness to an applied stimulus (Stimulus 1), with structural changes in their molecules and organized states. This feature article focuses on cascading responses as a new concept for integrating stimuli-responsive material design. In cascading responses, an original stimulus (Stimulus 1) is converted into other stimuli (Stimulus 2, 3, …, N) through successive conversions. Stimulus N provides the eventual output response. Integration of multiple stimuli-responsive materials is required to achieve cascading responses. Although cascade, domino, and tandem chemical reactions have been reported at the molecular level, they are not used for materials with higher organized structures. In this article, we introduce functional carriers and sensors based on cascading responses as model cases. The concept of cascading responses enables the achievement of transscale responsivity and sensitivity, which are not directly induced by the original stimulus or its responsive material, for the development of advanced dynamic functional materials.

The effects of alkyl substitution on the aggregation of π-conjugated dyes: spectroscopic study and modelling

A family of dithienosilole-based dyes with alternating donor and acceptor conjugated groups, decorated with linear or branched alkyl chains at different positions on the backbone, have been obtained and investigated in different aggregation states. These dyes are characterized by almost panchromatic absorption and by near-IR emission, with good quantum yields in a variety of solvents with different polarity. We demonstrate that the nature and position of the alkyl substituents strongly govern the self-assembly of the dyes, whose packing is also sensitive to external stimuli, such as grinding and water addition. Thanks to computational results and theoretical modelling, we are able to interpret the results based on two possible preferential packings, characterized by distinct spectroscopic behaviour, whose abundance can be tuned according to the nature and position of the alkyl chains, as well as via external stimuli.

Piezofluorochromism in Covalent Organic Frameworks: Pressure-Induced Emission Enhancement and Blue-Shifted Emission

Achieving enhanced or blue-shifted emission from piezochromic materials remains a major challenge. Covalent organic frameworks (COFs) are promising candidates for the development of piezochromic materials owing to their dynamic structures and adjustable optical properties, where the emission behaviors are not solely determined by the functional groups, but are also greatly influenced by the specific geometric arrangement. Nevertheless, this area remains relatively understudied. In this study, a successful synthesis of a series of bicarbazole-based COFs with varying topologies, dimensions, and linkages was conducted, followed by an investigation of their structural and emission properties under hydrostatic pressure generated by a diamond anvil cell. Consequently, these COFs exhibited distinct piezochromic behaviors, particularly a remarkable pressure-induced emission enhancement (PIEE) phenomenon with a 16-fold increase in fluorescence intensity from three-dimensional COFs, surpassing the performance of CPMs and most organic small molecules with PIEE behavior. On the contrary, three two-dimensional COFs with flexible structures exhibited rare blue-shifted emission, whereas the variants with rigid and conjugated structures showed common red-shifted and reduced emission. Mechanism research further revealed that these different piezochromic behaviors were primarily determined by interlayer distance and interaction. This study represents the first systematic exploration of the structures and emission properties of COFs through pressure-treated engineering and provides a new perspective on the design of piezochromic materials.

Isothermal Phase Transitions in Liquid Crystals Driven by Dynamic Covalent Chemistry

The dynamic nature of calamitic liquid crystals is exploited to perform isothermal phase transitions driven by dynamic covalent chemistry. For this purpose, nematic (N) arrays based on aldehyde 1 were treated with different amines (A-E) in an on-surface process, which resulted in different isothermal phase transitions. These phase transformations were caused by in situ imination reactions and are dependent on the nature of the added amine. Transitions from the N to crystal (1A, 1E), isotropic (1B), and smectic (Sm) (1C, 1D) phases were achieved, while the resulting materials feature thermotropic liquid crystal behavior. A sequential transformation from the N 1 to the Sm 1C and then to the N 1B was achieved by coupling an imination to a transimination processes and adjusting the temperature. All of these processes were well characterized by microscopic, spectroscopic, and X-ray techniques, unlocking not only the constitutional but also the structural aspects of the phase transitions. This work provides new insights into designing constitutionally and structurally adaptable liquid crystal systems, paving the way toward the conception of programable evolutive pathways and adaptive materials.

2D Photonic Colloidal Liquid Crystals Composed of Self-Assembled Rod-Shaped Particles

Photonic crystals, characterized by their periodic structures, have been extensively studied for their ability to manipulate light. Typically, the development of 2D photonic crystals requires either sophisticated equipment or precise orientation of spherical nanoparticles. However, liquid-crystalline (LC) materials offer a promising alternative, facilitating the formation of periodic structures without the need for complex manipulation. Despite this advantage, the development of 2D photonic periodic structures using LC materials is limited to a few colloidal nanodisk liquid crystals. Herein, 2D photonic colloidal liquid crystals composed of biomineral-based nanorods and water is reported. The soft photonic materials with 2D structure by self-assembled LC colloidal nanorods are unique and a new class of photonic materials different from conventional solid 2D photonic materials. These colloids exhibit bright structural colors with high reflectance (>50%) and significant angular dependency. The structural colors are adjusted by controlling the concentration and size of the LC colloidal nanorods. Furthermore, mechanochromic hydrogel thin films with 2D photonic structure are developed. The hydrogels exhibit reversible mechanochromic properties with angular dependency, which can be used for an advanced stimuli responsible sensor.

C3-Symmetric Luminescent Diketone with Amido-Linkage as a Polymorphic Fluorescence Emitter

The study introduces a novel C3-symmetric β-diketone compound, BTA-D3, and its monomeric counterpart, D, with a focus on their synthetic procedure, photophysical properties and aggregation behavior. Both compounds exhibit characteristic absorption and weak fluorescence in solution, with BTA-D3 displaying higher absorption coefficients due to its larger number of diketone units. Density Functional Theory (DFT) calculations suggest increased co-planarity of diketone groups in BTA-D3. A significant finding is the Aggregation-Induced Emission (AIE) property of BTA-D3, as its fluorescence intensity increases dramatically when exposed to specific solvent ratios. The AIE behavior is attributed to intermolecular excitonic interaction between BTA-D3 molecules in self-organized aggregates. We also studied fluorescence anisotropy of BTA-D3 and D. Despite its larger size, BTA-D3 showed reduced anisotropy values because of efficient intramolecular energy migration among three diketone units. Furthermore, BTA-D3 demonstrates unique polymorphism, yielding different emission colors and structures depending on the solvent used. A unique approach is presented for promoting the growth of self-organized aggregate structures via solvent evaporation, leading to distinct fluorescence properties. This research contributes to the understanding of C3-symmetric structural molecules and provides insights into strategies for controlling molecular alignment to achieve diverse fluorescence coloration in molecular materials.

Aggregation/Crystallization-Induced Emission in Naphthyridine-Based Carbazolyl-Modified Donor-Acceptor Boron Dyes Tunable by Fluorine Atoms

Four donor-acceptor boron difluoride complexes based on the carbazole electron donor and the [1,3,5,2]oxadiazaborinino[3,4-a][1,8]naphthyridine acceptor were designed, synthesized, and systematically spectroscopically investigated in solutions, in dye-doped polymer films, and in the solid states. The dyes exhibit an intense blue to red solid-state emission with photoluminescence quantum yields of up to 59 % in pure dye samples and 86 % in poly(methyl methacrylate) films. All boron complexes show aggregation-induced emission and reversible mechanofluorochromism. The optical properties of these dyes and their solid state luminescence can be tuned by substitution pattern, i. e., the substituents at the naphthyridine unit. Exchange of CH3- for CF3-groups does not only increase the intramolecular charge transfer character, but also provides a crystallization-induced emission enhancement.

Grinding-Induced Water Solubility Exhibited by Mechanochromic Luminescent Supramolecular Fibers

Most mechanochromic luminescent compounds are crystalline and highly hydrophobic; however, mechanochromic luminescent molecular assemblies comprising amphiphilic molecules have rarely been explored. This study investigated mechanochromic luminescent supramolecular fibers composed of dumbbell-shaped 9,10-bis(phenylethynyl)anthracene-based amphiphiles without any tetraethylene glycol (TEG) substituents or with two TEG substituents. Both amphiphiles formed water-insoluble supramolecular fibers via linear hydrogen bond formation. Both compounds acquired water solubility when solid samples composed of supramolecular fibers are ground. Grinding induces the conversion of 1D supramolecular fibers into micellar assemblies where fluorophores can form excimers, thereby resulting in a large redshift in the fluorescence spectra. Excimer emission from the ground amphiphile without TEG chains is retained after dissolution in water. The micelles are stable in water because hydrophilic dendrons surround the hydrophobic luminophores. By contrast, when water is added to a ground amphiphile having TEG substituents, fragmented supramolecular fibers with the same molecular arrangement as the initial supramolecular fibers are observed, because fragmented fibers are thermodynamically preferable to micelles as the hydrophobic arrays of fluorophores are covered with hydrophilic TEG chains. This leads to the recovery of the initial fluorescent properties for the latter amphiphile. These supramolecular fibers can be used as practical mechanosensors to detect forces at the mesoscale.

Mechanochromic aromatic hydrocarbons that bear one simple substituent

Structurally simple aromatic hydrocarbons that possess only one isocyano group show luminescent mechanochromism. The structural isomers of these aromatic hydrocarbons exhibit blue- and red-shifted emission bands upon mechanical stress. Their low molecular weight enables their sublimation under mild conditions.

Mechanochromic polymer blends made with an excimer-forming telechelic sensor molecule

The ability to monitor mechanical stresses and strains in polymers via an optical signal enables the investigation of deformation processes in such materials and is technologically useful for sensing damage and failure in critical components. We show here that this can be achieved by simply blending polymers of interest with a small amount of a mechanochromic luminescent additive (Py-PEB) that can be accessed in one step by end-functionalizing a telechelic poly(ethylene-co-butylene) (PEB) with excimer-forming pyrenes. Py-PEB is poorly miscible with polar polymers, such as poly(ε-caprolactone) and poly(urethane), so that blends undergo microphase separation even at low additive concentrations (0.1-1 wt%), and the emission is excimer-dominated. Upon deformation, the ratio of excimer-to-monomer emission intensity decreases in response to the applied stress or strain. The approach appears to be generalizable, although experiments with poly(isoprene) show that it is not universal and that the (in)solubility of the additive in the polymer must be carefully tuned.

Mechanoresponsive Flexible Crystals

Flexible crystals have gained significant attention owing to their remarkable pliability, plasticity, and adaptability, making them highly popular in various research and application fields. The main challenges in developing flexible crystals lie in the rational design, preparation, and performance optimization of such crystals. Therefore, a comprehensive understanding of the fundamental origins of crystal flexibility is crucial for establishing evaluation criteria and design principles. This Perspective offers a retrospective analysis of the development of flexible crystals over the past two decades. It summarizes the elastic standards and possible plastic bending mechanisms tailored to diverse flexible crystals and analyzes the assessment of their theoretical basis and applicability. Meanwhile, the compatibility between crystal elasticity and plasticity has been discussed, unveiling the immense prospects of elastic/plastic crystals for applications in biomedicine, flexible electronic devices, and flexible optics. Furthermore, this Perspective presents state-of-the-art experimental avenues and analysis methods for investigating molecular interactions in molecular crystals, which is vital for the future exploration of the mechanisms of crystal flexibility.

Force-triggered hypso- and bathochromic bidirectional fluorescence switching beyond 120 nm and its anticounterfeiting applications

Achieving high-contrast tricolor emissive regulation of a single-component molecule using a single type of external stimulus is highly desirable but challenging. In the present study, we report a symmetric acceptor-donor-acceptor (A-D-A)-type aggregation-induced emission-active luminogen, which displays a sequential high-contrast fluorescence switching just by anisotropic mechanical grinding. Specifically, upon light grinding, an orange-yellow-to-blue hypsochromic mechanofluorochromic response with a distinct color contrast (change in the maximum emission wavelength, Δλem,max = 122 nm) is noticed, and the slightly ground solid exhibits a blue-to-red high-contrast (Δλem,max = 185 nm) bathochromic mechanofluorochromic conversion upon vigorous grinding. Thus, using a single luminogen developed here, we can realize wide-range (Δλem,max > 100 nm) hypso- and bathochromic fluorescence mechanochromisms simultaneously. The tricolored mechanofluorochromic phenomenon is attributed to two different morphological transitions involving crystalline-to-crystalline and crystalline-to-amorphous states. Furthermore, three information anticounterfeiting systems are developed using the luminogen presented here.

Imidazole-based solid-state fluorescence switch: Stimuli-responsive emission, mechanochromism and acidochromism

Stimuli modulated fluorescence properties of imidazole-based molecular probe (E)-2-(5,5-dimethyl-3-(4-(1,4,5-triphenyl-1H-imidazole-2-yl)styryl)cyclohex-2-en-1- ylidene)malononitrile (Ph-ISO) in the solid state is presented. Not only did the probe display aggregation induced emission (AIE) activity with intense solid-state fluorescence emission, but also exhibited several repetitive cycles of reversible mechanochromism as well as acidochromism. The solid-state emission is ascribed to the intermolecular interactions in the highly twisted conformation of Ph-ISOviamultiple C-H---N and C-H---π interactions as confirmed by the single crystal X-ray analysis. The applied mechanical stress in the form of grinding results in the transformation of crystalline state to the amorphous state with a red shifted emission band attributed to attaining more planar conformation vs twisted conformation, with extended molecular conjugation. While reversible mechanochromism makes the probe suitable for rewritable papers, the switchable acidochromism is useful for theon-sitemonitoring of pH differences in biological and environmental media.

Effect of Polymer Host on Aggregation-Induced Enhanced Emission of Fluorescent Optical Brighteners

Fluorophores displaying concentration-dependent luminescence are becoming increasingly valuable in stress-sensing, tagging, and dyeing applications, including the quantification of recycled content in plastic packaging. In this work, we investigate the effects of the polymer matrix, dye structure, and crystallinity on aggregation-induced enhanced emission (AIEE). We demonstrate that the aggregation threshold required for successful quantification can be adjusted through modulation of guest-host (dye-polymer) interactions and monitored using an array of fluorescence characterization. Modification of guest-host interactions is realized through choice of host, change of guest, and tuning of the crystallinity of the host system. Increasing the number of guest-host interactions and solubility between guest and host, loosely predicted through the calculation of the solubility parameter, increases the aggregation threshold relative to other low-polarity and low-interacting systems. We demonstrate that issues, such as loading level and cost, associated with high aggregation thresholds, can be circumvented by increasing system crystallinity, improving spectral intensities, and subsequent quantification. These insights explore the fundamental understanding of supramolecular interactions that govern dye-polymer systems.

Stimuli-fluorochromic smart organic materials

Smart materials based on stimuli-fluorochromic π-conjugated solids (SFCSs) have aroused significant interest due to their versatile and exciting properties, leading to advanced applications. In this review, we highlight the recent developments in SFCS-based smart materials, expanding beyond organometallic compounds and light-responsive organic luminescent materials, with a discussion on the design strategies, exciting properties and stimuli-fluorochromic mechanisms along with their potential applications in the exciting fields of encryption, sensors, data storage, display, green printing, etc. The review comprehensively covers single-component and multi-component SFCSs as well as their stimuli-fluorochromic behaviors under external stimuli. We also provide insights into current achievements, limitations, and major challenges as well as future opportunities, aiming to inspire further investigation in this field in the near future. We expect this review to inspire more innovative research on SFCSs and their advanced applications so as to promote further development of smart materials and devices.

Mechanofluorochromic Properties of 1,4-Diphenylanthracene Derivatives with Hypsochromic Shift

Several types of 1,4-diphenylanthracene derivatives 1-4 were prepared, and their photophysical properties were observed in the solid and solution states. Interestingly, the CN-group-substituted 1,4-diphenylanthracene derivative 2 was found to exhibit a higher fluorescence quantum yield (ϕf = 0.71) in the solid state than in the solution state, probably due to the formation of an intermolecular Ar-CN⋯H-Ar hydrogen bond and antiparallel type locked packing structure in the solid state. Furthermore, for some derivatives, an increase in the fluorescence quantum yield was observed in the PMMA film (1 wt%) over both the solid state and the solution state. More interestingly, some of the 1,4-diphenylanthracene derivatives exhibited unusual mechanofluorochromic properties with a "hypsochromic shift" in luminous color depending on the substituents of the phenyl group, and with the derivatives having CF3, OMe, CN, and two F substituents (1d-1f, 2-4) showing a significant luminous color change with a "hypsochromic shift" after grinding. However, no change in the luminous color was observed for the derivatives having H, Me, and one F substituent (1a-1c), and especially for some of the CN-substituted derivatives, a reversible luminous color change with a "hypsochromic shift" was observed, probably due to the formation of an antiparallel type packing structure. These "hypsochromic" anthracene derivatives could probably be utilized as new mechanofluorochromic materials.

Thermally activated delayed fluorescence emitters showing wide-range near-infrared piezochromism and their use in deep-red OLEDs

Organic small molecules exhibiting both thermally activated delayed fluorescence (TADF) and wide-ranging piezochromism (Δλ > 150 nm) in the near-infrared region have rarely been reported in the literature. We present three emitters MeTPA-BQ, tBuTPA-BQ and TPPA-BQ based on a hybrid acceptor, benzo[g]quinoxaline-5,10-dione, that emit via TADF, having photoluminescence quantum yields, ΦPL, of 39-42% at photoluminescence (PL) maxima, λPL, of 625-670 nm in 2 wt% doped films in 4,4'-bis(N-carbazolyl)-1,1'-biphenyl (CBP). Despite their similar chemical structures, the PL properties in the crystalline states of MeTPA-BQ (λem = 735 nm, ΦPL = 2%) and tBuTPA-BQ (λem = 657 nm, ΦPL = 11%) are significantly different. Further, compounds tBuTPA-BQ and TPPA-BQ showed a significant PL shift of ∼98 and ∼165 nm upon grinding of the crystalline samples, respectively. Deep-red organic light-emitting diodes with MeTPA-BQ and tBuTPA-BQ were also fabricated, which showed maximum external quantum efficiencies, EQEmax, of 10.1% (λEL = 650 nm) and 8.5% (λEL = 670 nm), respectively.

Investigation of Mechanochromic Luminescence of Pyrene-based Aggregation-Induced Emission Luminogens: Correlation between Molecular Packing and Luminescence Behavior

To better understand the correlation between molecular structure and optical properties such as aggregation-induced emission (AIE) and mechanochromic luminescence (MCL) emission, two new pyrene-based derivatives with substitutions at the 4- and 5-positions (1HH) and at the 4-, 5-, 9-, and 10-positions (2HH) were designed and synthesized. Cyano groups were introduced at the periphery of the synthesized compounds (1HCN, 1OCN, 1BCN, 2HCN, 2OCN, and 2BCN) to investigate the influence of these groups on the emission properties of the pyrene derivatives both in solution and in the solid state. The fluorescence emission performance of these compounds in water/acetone mixtures was simultaneously studied, revealing outstanding aggregation-induced emission properties. The typical shift in emission maxima to higher values was attributed to J-aggregate formation in the aggregate state. Careful investigation of the crystal structures demonstrated abundant and intense intermolecular interactions, such as C-H…π and C-H…N hydrogen bonds, contributing to the remarkable mechanochromic luminescence performance of these compounds. The MCL properties of all the compounds were investigated using powder X-ray diffraction, and the remarkable mechanochromic properties were attributed to J-aggregate phenomena in the solid state. These results provide valuable insights into the structure-property relationship of organic MCL materials, guiding the design of efficient organic MCL materials.

Solution-state mechanochromic luminescence of Pt(ii)-complexes displayed within micellar aromatic capsules

Mechanochromic luminescence (MCL) is an intrinsic phenomenon in the solid state and thus has been hardly observed in solution so far. Here we report that arylethynyl Pt(ii)-complexes with an NCN-pincer ligand are efficiently encapsulated by micellar aromatic capsules in water, through a simple grinding protocol with bent amphiphiles. When a bent pentamethylbenzene-based amphiphile is employed as an optimized capsule component, the resultant host-guest composite, with an average diameter of ∼4 nm, is obtained in water at room temperature. Notably, the nanocomposite displays strong red emission (Φ = 33%, λmax = 700 nm) derived from MCL via intermolecular Pt(ii)⋯Pt(ii) interactions even under aerobic aqueous conditions, in sharp contrast to the free Pt(ii)-complex with weak green emission (Φ = 4%, λmax = 500 nm) in CH2Cl2. Moreover, enhancement of the solution-state MCL (up to Φ = 48%) can be achieved by coencapsulation of the Pt(ii)-complexes with carbazole derivatives by the capsule in water. This study provides the first example of "solution-state" mechanochromic luminescence, capable of facilely tuning its intensity and wavelength, among the intensive studies of various solid-state MCL reported previously.

Stimuli-Responsive Properties on a Bisbenzofuropyrazine Core: Mechanochromism and Concentration-Controlled Vapochromism

Stimulus-responsive organic materials with luminescence switching properties have attracted considerable attention for their practical applications in sensing, security, and display devices. In this paper, bent-type bisbenzofuropyrazine derivatives, Bent-H and Bent-sBu, with good solubilities were synthesized, and their physical and optical properties were investigated in detail. Bent-H gave three crystalline polymorphs, and they showed different luminescence properties depending on their crystal packing structures. In addition, Bent-H exhibited mechanochromic luminescence in spite of its rigid skeleton. Bent-sBu exhibited unique concentration-dependent vapochromic luminescence. Ground Bent-sBu was converted to blue-emissive, green-emissive, and green-emissive high-viscosity solution states at low, moderate, and high concentrations of CHCl3 vapor, respectively. This finding represents a concentration-dependent multi-phase transition with an organic solvent, which is of potent interest for application in sensing systems.

Hydrosilane/Organoiodine Coupling-Enabled Studies of Organosilane Physical Properties

ConspectusThis Account summarizes recent developments in metal-mediated coupling reactions between hydrosilanes and aryl iodides in the presence of Pd(P(t-Bu)3)2 and base. Alkylated organosilanes are obtained when Pt(P(t-Bu)3)2 and a base are employed in reactions between hydrosilanes and aliphatic iodides. These transformations show unusual reactivity compared to the typical behavior of hydrosilanes toward organoiodides in the presence of PdCl2 or PtCl2, and they proceed in high yields under mild conditions. In addition, the reaction demonstrates (1) high functional group tolerances, (2) stepwise introduction of substituents onto silicon atoms from secondary silanes, and (3) transformation without cleavage of weak Si-Si σ bonds in the molecules.This transformation can serve as a powerful tool for the synthesis of functional organosilicon compounds. The advantage is the flexibility in the molecular structure due to the large size compared to carbon. These compounds have relatively sparse packing in the crystalline state, unlike π-conjugated molecules, which induce dense π-π interactions. Consequently, they have significantly different physical properties in solution and in the solid state. Among them, aromatic disilanes and oligosilanes are important substance groups, because the conjugated chain within these molecules expands due to σ-π interaction between Si-Si σ bond and π orbital of aromatic ring. σ-π Conjugation is most efficient when the dihedral angle between the aromatic ring and the Si-Si bond is 90°, resulting in the overlap of σ orbital and π orbital. The conformational structure, packing, and physical properties of these compounds can change in tandem in response to external stimuli through a crystal phase transition. The interlocking changes in structure and physical properties are reversible, easily returning to their original state with different external stimulus. This account covers several important aspects, including solid-state emission with high fluorescence intensity, aggregation-induced emission (AIE) in water-THF system, mechanochromic fluorescence, organic light emitting diode (OLED), second harmonic generation (SHG) and thermosalient phenomena.This reaction can synthesize optically active tertiary and quaternary silanes by the enantioselective arylation of secondary silanes with aryl iodides using a palladium catalyst modified with a TADDOL-derived amide phosphoric acid ester as a chiral ligand. These optically active compounds can be used as useful circularly polarized luminescence (CPL) materials due to their strong luminescence intensity (Φ) and luminescence dissymmetry factor (glum) attributed to the chiral silicon atom. The efficient synthesis of sila-pharmaceuticals using this method as a key step is also described.The technique enables the design and synthesis of various silicon-containing bioactive substances and medical chemicals. Through the synthesis of organosilane compounds using this method, it is anticipated that the development of functional organic silanes will accelerate their practical applications in a wide range of fields.

Solid-State Solvent-Independent Excited-State Intramolecular Proton Transfer in a Coordination Polymer and Its Temperature Dependence

Increasing demand for futuristic switches and sensors around the world has created an intense interest in smart materials, which can show a rapid but feature-dependent change in the physical properties in the presence of external stimuli. Hitherto such changes in the photophysical property of materials, specifically in the solid state, are projected for the use of smart on-off switches. Materials having an external-stimuli-responsive change in the photophysical properties like excited-state intramolecular proton transfer (ESIPT) can also be utilized for these purposes. Although the event of solid-state ESIPT is not new in the domain of material chemistry, especially for organic molecules, it was never observed for coordination polymers (CPs). Previous instances of ESIPT in CPs have necessitated the presence of a solvent as a suspension medium, driving a solvent-assisted ESIPT phenomenon. However, the emergence of a solvent-independent ESIPT-enabled CP presents unique advantages. The well-defined periodic arrangement ensures reliable property variations, while the robust coordination bonds between the metal nodes and ligands provide durability in harsh environments. Addressing this gap, we present the first ever solid-state, solvent-free, and solvent-independent ESIPT-active CP. Remarkably, this CP exhibits temperature-dependent ESIPT on-off behavior, demonstrating its potential as a cutting-edge material in the field of smart switches and sensors.

Mechanoluminescence, thermoluminescence, optically stimulated luminescence and photoluminescence in SrAl2O4:Eu micro- and nanophosphors: effect of particle size and annealing in different atmospheres

SrAl2O4:Eu in microcrystalline form was prepared by a combustion method. The formation of the material in a single phase was confirmed by XRD analysis. The material was crushed and sieved to get particles with different particle size ranges. It was further ball milled for 1-7 days to get particles in the nanosize ranges. The broadening of the XRD peaks of the phosphor material in nanocrystalline form was used to determine average particle sizes. The shapes and sizes of these particles could also be seen in FESEM images. The materials thus obtained were annealed in reducing (10% H2 in Ar) and oxidizing (in air) atmospheres at different temperatures for 1.0 h. The increase in the mechanoluminescence (ML) intensity on annealing in a reducing atmosphere at different temperatures and decrease on annealing in an oxidizing atmosphere could be attributed to redox reactions. This was further confirmed by PL measurements. Mechanoluminescence (ML), thermoluminescence (TL), and optically stimulated luminescence (OSL) of the materials were studied. In all three cases (i.e., ML, TL, and OSL), the intensities are found to decrease with the particle size. A large shift of approximately 20 °C in the main peak of TL glow curves of micro- and nanocrystalline materials shows a widening of the band gap due to the particle size effect. A decrease in piezoelectric constant (d33) and field (F V m-1) with particle size was also observed. The present systematic study of particle size effect (over a wide range of particle sizes) on ML has great importance from a technological and application point of view for developing stress sensors.

cis/trans-[Pt(C∧N)(C≡CR)(CNBut)] Isomers: Synthesis, Photophysical, DFT Studies, and Chemosensory Behavior

cis/trans Isomerism can be a crucial factor for photophysical properties. Here, we report the synthesis and optical properties of a series of trans- and cis-alkynyl/isocyanide cycloplatinated compounds [Pt(C^∧N)(C≡CR)(CNBu^t)] [R = C₆H₄-4-OMe 1, 3-C₄H₃S 2; C^∧N = 2-(2,4-difluorophenyl)pyridine (dfppy) (a), 4-(2-pyridyl)benzaldehyde (ppy-CHO) (b)]. The trans-forms do not isomerize thermally in MeCN solution to the cis forms, but upon photochemical irradiation in this medium at 298 K, a variable isomerization to the cis forms was observed. This behavior is in good agreement with the theoretically calculated energy values. The trans/cis configuration, the identity of the cyclometalated, and the alkynyl ligand influence on the absorption and emission properties of the complexes in solution, polystyrene (PS) films, and solid state are reported. All complexes are efficient triplet emitters in all media (except for trans-1a and trans-2a in CH₂Cl₂ solution at 298 K), with emission wavelengths depending mainly on the cyclometalated ligand in the region 473-490 nm (dfppy), 510-550 (ppy-CHO), and quantum yields (ϕ) ranging from 18.5 to 40.7% in PS films. The combined photophysical data and time-dependent density functional theory calculations (TD-DFT) at the excited-state T₁ geometry reveal triplet excited states of ³L'LCT (C≡CR → C^∧N)/³IL (C^∧N) character with minor ³MLCT contribution. The dfppy (a) complexes show a greater tendency to aggregate in rigid media than the ppy-CHO (b) and the cis with respect to the trans, showing red-shifted structureless bands of ³MMLCT and/or excimer-like nature. Interestingly, trans-1a,2a and cis-1a,2a undergo significant changes in the ultraviolet (UV) and emission spectra with Hg²⁺ ions enabling their use for sensing of Hg²⁺ ions in solution. This is clearly shown by the hypsochromic shift and substantial decrease of the low-energy absorption band and an increase of the intensity of the emission in the MeCN solution upon the addition of a solution of Hg(ClO₄)₂ (1:5 molar ratio). Job's plot analysis estimated a 1:1 stoichiometry in the complexation mode of Hg²⁺ by trans-2a. The binding constant (log K) calculated for this system from absorption titration data resulted to be 2.56, and the limit of the detection (LOD) was 6.54 × 10^-7 M.

A highly sensitive friction-imaging device based on cascading stimuli responsiveness

Imaging and measurement of friction forces are required in a variety of fields. If the friction forces originating from the motions of professionals are quantitatively analyzed, the data can be applied to a motion-copying system by a robot. However, weak friction forces have not been visualized and quantified using conventional sensing materials and devices because of their low sensitivity. Here we present a highly sensitive friction-imaging device based on the cascading responses of stimuli-responsive materials, namely polydiacetylene (PDA) and dry liquid (DL). Weak friction forces disrupt the DL, which is composed of liquid droplets surrounded by solid particles. The outflowing liquid under chemical stress changes the color of PDA. The cascading responses enable colorimetric imaging and measurement of weak friction forces in the range of 0.006-0.080 N. Furthermore, the device visualizes the force distribution of handwriting in calligraphy depending on the individual characteristics of an expert, a practician, and a beginner. A high-sensitivity friction-imaging device can be used to understand various motions.

Photoinduced crystal melting with luminescence evolution based on conformational isomerisation

The phenomenon of crystal melting by light irradiation, known as photo-induced crystal-to-liquid transition (PCLT), can dramatically change material properties with high spatiotemporal resolution. However, the diversity of compounds exhibiting PCLT is severely limited, which hampers further functionalisation of PCLT-active materials and the fundamental understandings of PCLT. Here, we report on heteroaromatic 1,2-diketones as the new class of PCLT-active compounds, whose PCLT is based on conformational isomerisation. In particular, one of the diketones demonstrates luminescence evolution prior to crystal melting. Thus, the diketone crystal exhibits dynamic multistep changes in the luminescence colour and intensity during continuous ultraviolet irradiation. This luminescence evolution can be ascribed to the sequential PCLT processes of crystal loosening and conformational isomerisation before macroscopic melting. Single-crystal X-ray structural analysis, thermal analysis, and theoretical calculations of two PCLT-active and one inactive diketones revealed weaker intermolecular interactions for the PCLT-active crystals. In particular, we observed a characteristic packing motif for the PCLT-active crystals, consisting of an ordered layer of diketone core and a disordered layer of triisopropylsilyl moieties. Our results demonstrate the integration of photofunction with PCLT, provide fundamental insights into the melting process of molecular crystals, and will diversify the molecular design of PCLT-active materials beyond classical photochromic scaffolds such as azobenzenes.

Liquid-solid phase regulating excited-state intramolecular proton transfer process of HBT-d-NO2: A QM/MM study

The excited-state intramolecular proton transfer process of 2-(1,3-benzothiazol-2-yl)-4-[2-(4-nitrophenyl)ethynyl]phenol (HBT-d-NO₂) in the different surrounding environment is investigated using density functional theory (DFT) and time-dependent density functional theory (TDDFT). The optimized molecular structure provides convincing evidence that the intramolecular hydrogen bond is strengthened in the first excited (S₁) state. The frontier molecular orbitals observed the HBT-d-NO₂ exists obvious intramolecular charge translate phenomenon. The results of the potential energy curve show that HBT-d-NO₂ is difficult to undergo proton transfer in the ground (S₀) state due to the high energy barrier, while it becomes easier in the S₁ state in both liquid and solid phases. By comparison, the energy barrier of ESIPT in the solid phase is higher than that in the liquid phase. We can conclude that the solid phase effectively hinders the ESIPT process compared with that the liquid phase. In this work, we illustrate the influence of liquid and solid phases on the intramolecular proton transfer process, which could promote further developments in biomedical and fluorophore applications.

Multi-Stimuli-Responsive Amphiphilic Pyridinium Salt and Its Application in the Visualization of Level 3 Details in Latent Fingerprints

Organic luminescent materials that can simultaneously achieve multimode mechanochromism and its water-vapor-induced recovery are desirable for practical applications but rarely reported. Herein, an amphiphilic compound, 4-(9H-carbazol-9-yl)-1-(2-hydroxyethyl)pyridin-1-ium bromide (CPAB), is designed by integrating a lipophilic aromatic unit and hydrophilic end in the molecular architecture. Self-recovered mechanochromism from brown to cyan is observed upon mechanical grinding in air. Comprehensive research by X-ray diffraction, infrared spectroscopy, and single-crystal analysis reveals that the photoluminescence switch originates from the variation in intermolecular hydrogen bonds and molecular packing mode. The amphiphilic nature of CPAB allows water molecules to enter the crystalline lattice, forming two polymorphs of the crystalline phase, namely CPAB-D and CPAB-W. The hydrosoluble CPAB exhibits excellent capability in probing the level 3 details of fingerprints because its lipophilic part can target the fatty acid residues of fingerprints, leading to strong aggregation-induced fluorescence. The research may inspire the design of latent fingerprint developers and application in forensics/anti-counterfeiting.

Quinolinium-Based Fluorescent Probes for Dynamic pH Monitoring in Aqueous Media at High pH Using Fluorescence Lifetime Imaging

Spatiotemporal pH imaging using fluorescence lifetime imaging microscopy (FLIM) is an excellent technique for investigating dynamic (electro)chemical processes. However, probes that are responsive at high pH values are not available. Here, we describe the development and application of dedicated pH probes based on the 1-methyl-7-amino-quinolinium fluorophore. The high fluorescence lifetime and quantum yield, the high (photo)stability, and the inherent water solubility make the quinolinium fluorophore well suited for the development of FLIM probes. Due to the flexible fluorophore-spacer-receptor architecture, probe lifetimes are tunable in the pH range between 5.5 and 11. An additional fluorescence lifetime response, at tunable pH values between 11 and 13, is achieved by deprotonation of the aromatic amine at the quinolinium core. Probe lifetimes are hardly affected by temperature and the presence of most inorganic ions, thus making FLIM imaging highly reliable and convenient. At 0.1 mM probe concentrations, imaging at rates of 3 images per second, at a resolution of 4 μm, while measuring pH values up to 12 is achieved. This enables the pH imaging of dynamic electrochemical processes involving chemical reactions and mass transport.

15N CP/MAS NMR as a Tool for the Mechanistic Study of Mechanical Stimuli-Responsive Materials: Evidence for the Conformational Change of an Emissive Dimethylacridane Derivative

Mechanochromic luminescent molecules are currently attracting considerable attention because of their promising technological applications, but understanding their mechanism of action is challenging and is thus hindering our deeper understanding of these materials. The conformational change of 9,9'-dimethyl-9,10-dihydroacridane derivative 1 was examined using solid-state ¹⁵N nuclear magnetic resonance (NMR) spectroscopic techniques without using a specifically ¹⁵N-labeled compound. A difference between the two conformers was clearly observed in the measurements and was assigned to the ⟨pl⟩ and ⟨bf⟩ spatial structures. The results were supported by quantum chemical calculations on ¹⁵N NMR chemical shifts of each isomer. The technique presented here can clearly identify the structural changes caused by crushing a powder sample. Such structural changes are difficult to determine using X-ray diffraction (XRD) measurements.

Scissor-like Au4Cu2 Cluster with Phosphorescent Mechanochromism and Thermochromism

Reaction of [Au(tht)2](ClO4) (tht = tetrahydrothiophene), [Cu(CH3CN)4](ClO4), 3,6-di-tert-butyl-1,8-diethynyl-9H-carbazole (H3decz), and bis(2-diphenylphosphinophenyl)ether (POP) in the presence of triethylamine (NEt3) gave the cluster complex Au4Cu2(decz)2(POP)2 as yellow crystals. As revealed by X-ray crystallography, the Au4Cu2 cluster exhibits scissor-like structure sustained by two decz and two POP ligands and stabilized by Au-Cu and Au-Au interactions. The Au4Cu2 cluster shows bright yellow to orange photoluminescence upon irradiation at >300 nm, arising from 3[π (decz)→5d (Au)] 3LMCT (ligand-to-metal charge transfer) and 3[π→π* (decz)] 3IL (intraligand) triplet states as revealed by theoretical and computational studies. When it is mechanically ground, reversible phosphorescence conversion from yellow to red is observed owing to more compact molecular packing and thus stronger intermetallic interaction. Variable-temperature luminescence studies reveal that it displays distinct red-shifts of the emission whether the temperature is elevated or lowered from ambient temperature, suggestive of exceptional thermochromic phosphorescence characteristics.

Self-Assembled Encapsulation of CuX2- (X = Br, Cl) in a Gold Phosphine Box-like Cavity with Metallophilic Au-Cu Interactions

Synthetic routes to the crystallization of two new box-like complexes, [Au6(Triphos)4(CuBr2)](OTf)5·(CH2Cl2)3·(CH3OH)3·(H2O)4 (1) and [Au6(Triphos)4 (CuCl2)](PF6)5·(CH2Cl2)4 (2) (triphos = bis(2-diphenylphosphinoethyl)phenylphosphine), have been developed. The two centrosymmetric cationic complexes have been structurally characterized through single-crystal X-ray diffraction and shown to contain a CuX2- (X = Br or Cl) unit suspended between two Au(I) centers without the involvement of bridging ligands. These colorless crystals display green luminescence (λem = 527 nm) for (1) and teal luminescence (λem = 464 nm) for (2). Computational results document the metallophilic interactions that are involved in positioning the Cu(I) center between the two Au(I) ions and in the luminescence.

Donor-π-Acceptor-Type Fluorinated Tolane Containing a Semifluoroalkoxy Chain as a Condensed-Phase Luminophore

Photoluminescent liquid-crystalline (PLLC) molecules, which can easily tune the PL behavior through the crystal (Cry)-LC phase transition, have attracted significant attention. Previously, we have demonstrated that the incorporation of a semifluoroalkoxy chain into π-conjugated mesogen is a promising approach for developing PLLC molecules with PL and SmA LC characteristics. We focused on the LC and PL characteristics of the molecules induced by the semifluoroalkoxy chain and fluorinated tolanes in the condensed phase. In this study, we developed cyano- or ethoxycarbonyl-terminated donor-π-acceptor-type fluorinated tolanes containing a semifluoroalkoxy flexible chain. The cyano-terminated fluorinated tolanes exhibited intense light-blue photoluminescence in the crystalline phase and did not exhibit any LC phase. In contrast, blue photoluminescence in the ethoxycarbonyl-terminated analogs was slightly weak; however, they exhibited Cry-SmA phase transition during the heating and cooling processes. The PL intensity of the ethoxycarbonyl-terminated fluorinated tolanes significantly decreased in the SmA phase; however, their PL colors changed during the Cry-SmA phase transition. This indicates that the developed tolanes are promising temperature-dependent PL materials, such as PL thermosensors or PL thermometers.

Thermo-Induced Bathochromic Emission in Columnar Discotic Liquid Crystals Realized by Intramolecular Planarization

Most organic thermochromic fluorescent materials exhibit thermo-induced hypsochromic emission due to the formation of excimers in ordered molecular solids; however, it is still a challenge to endow them with bathochromic emission despite its significance in making up the field of thermochromism. Here, a thermo-induced bathochromic emission in columnar discotic liquid crystals is reported realized by intramolecular planarization of the mesogenic fluorophores. A three-armed discotic molecule of dialkylamino-tricyanotristyrylbenzene was synthesized, which preferred to twist out of the core plane to accommodate ordered molecular stacking in hexagonal columnar mesophases, giving rise to bright green monomer emission. However, intramolecular planarization of the mesogenic fluorophores occurred in isotropic liquid increasing the conjugation length, and as a result led to thermo-induced bathochromic emission from green to yellow light. This work reports a new concept in the thermochromic field and provides a novel strategy to achieve fluorescence tuning from intramolecular actions.

Doping of charge-transfer molecules in cocrystals for the design of materials with novel piezo-activated luminescence

A novel piezo-activated luminescent material with wide range modulation of the luminescence wavelength and a giant intensity enhancement upon compression was prepared using a strategy of molecular doping. The doping of THT molecules into TCNB-perylene cocrystals results in the formation of a weak but pressure-enhanced emission center in the material at ambient pressure. Upon compression, the emissive band from the undoped component TCNB-perylene undergoes a normal red shift and emission quenching, while the weak emission center shows an anomalous blue shift from 615 nm to 574 nm and a giant luminescence enhancement up to 16 GPa. Further theoretical calculations show that doping by THT could modify intermolecular interactions, promote molecular deformation, and importantly, inject electrons into the host TCNB-perylene upon compression, which contributes to the novel piezochromic luminescence behavior. Based on this finding, we further propose a universal approach to design and regulate the piezo-activated luminescence of materials by using other similar dopants.

Cationic Zinc(II) Complexes with Carbazole-Type Counter-Anions: Intracomplex Donor/Acceptor Pairs Affording Exciplexes with Thermally Activated Delayed Fluorescence

Two cationic zinc(II) complexes with carbazole-type counter-anions, namely, [Zn(tpy)₂]²⁺[CAZ-p-BF₃^-]₂ (Zn-p) and [Zn(tpy)₂]²⁺[CAZ-o-BF₃^-]₂ (Zn-o), have been designed and synthesized, where tpy is 2,2':6',2″-terpyridine, CAZ-p-BF₃^- is 4-((9H-carbazol-9-yl)phenyl)trifluoroborate, and CAZ-o-BF₃^- is (2-(9H-carbazol-9-yl)phenyl)trifluoroborate. The complex cation [Zn(tpy)₂]²⁺ (as the acceptor) and the carbazole-type counter-anion CAZ-p-BF₃^- or CAZ-o-BF₃^- (as the donor) form an intracomplex donor/acceptor pair. Single-crystal structures reveal that compared to Zn-p, Zn-o exhibits a stronger π-π stacking interaction between the carbazole group (as the donor unit) of the counter-anion and the tpy ligand (as the acceptor unit) of [Zn(tpy)₂]²⁺ because of the different anchoring position of the BF₃^- anion in the counter-anion. In a doped film, Zn-p and Zn-o afford an isolated exciplex formed between the carbazole group and the tpy ligand within the single complex, which gives green-yellow emission with a thermally activated delayed fluorescence (TADF) feature. In crystalline states, Zn-p and Zn-o afford exciplexes with blue emission centered at 468 nm and green-blue emission centered at 508 nm, respectively. The Zn-p crystalline sample shows a relatively large singlet-triplet energy gap (ΔE_ST) (0.33 eV) and no TADF, whereas the Zn-o crystalline sample exhibits a small ΔE_ST (0.06 eV) and distinct TADF, with a reverse intersystem crossing rate at 3.3 × 10⁵ s^-1. Zn-p and Zn-o both exhibit intriguing mechanochromic luminescence, with largely red-shifted (by over 70 nm) emission and modulated TADF properties upon mechanically grinding the crystalline samples. The work demonstrates that donor/acceptor pairs affording exciplexes can be formed within cationic metal complexes using counter-anions with donor nature, which opens a new avenue toward photo-active metal complexes with rich photophysical properties.

Reentrant 2D Nanostructured Liquid Crystals by Competition between Molecular Packing and Conformation: Potential Design for Multistep Switching of Ionic Conductivity

Reentrant phenomena in soft matter and biosystems have attracted considerable attention because their properties are closely related to high functionality. Here, we report a combined experimental and computational study on the self-assembly and reentrant behavior of a single-component thermotropic smectic liquid crystal toward the realization of dynamically functional materials. We have designed and synthesized a mesogenic molecule consisting of an alicyclic trans,trans-bicyclohexyl mesogen and a polar cyclic carbonate group connected by a flexible tetra(oxyethylene) spacer. The molecule exhibits an unprecedented sequence of layered smectic phases, in the order: smectic A-smectic B-reentrant smectic A. Electron density profiles and large-scale molecular dynamics simulations indicate that competition between the stacking of bicyclohexyl mesogens and the conformational flexibility of tetra(oxyethylene) chains induces this unusual reentrant behavior. Ion-conductive reentrant liquid-crystalline materials have been developed, which undergo the multistep conductivity changes in response to temperature. The reentrant liquid crystals have potential as new mesogenic materials exhibiting switching functions.

High-contrast reversible multiple color-tunable solid luminescent ionic polymers for dynamic multilevel anti-counterfeiting

Dynamic color-tunable luminescent materials, which possess huge potential applications in advanced multilevel luminescence anti-counterfeiting, are of considerable interest. However, it remains challenging to develop simple high-contrast reversible multiple (triple or more than triple) color-tunable high-efficiency solid luminescent materials with low cost, facile synthesis, and good processability. Herein, by simply grafting charged multi-color AIEgen-based chromophores into polymers, a series of high-efficiency multiple color-tunable luminescent single ionic polymers are constructed through tuning feed ratios, counter anions and reaction solvents. Remarkably, some ionic polymers can not only achieve rare high-contrast reversible multiple color-tunable emission in solid states in response to different solvent stimuli, but also could realize excitation-dependent color-tunable emission. To the best of our knowledge, such charming multiple (triple or more than triple) color-tunable solid polymers responding to multiple external stimuli are still rare. Based on comparative studies of emission spectra, excitation spectra and fluorescence lifetimes before and after swelling, it could be inferred that solvent stimuli could induce microstructure changes of these ionic polymers and then change the aggregated-states of their corresponding AIE-active emission centers. Moreover, the different solvent stimuli could induce to produce different degrees of microstructure changes, resulting in their unique multiple color-tunable emission. More significantly, these smart color-tunable ionic polymers show great promise for applications in dynamic multilevel (three-level or even more than three-level) anti-counterfeiting.

Solvates of a dianisyl-substituted donor–acceptor-type benzothiadiazole: mechanochromic, vapochromic, and acid-responsive multicolor luminescence

Solvates of a donor–acceptor-type fluorophore exhibited multicolor luminescence that can respond to mechanical stimuli, solvent and acid vapors.

Control of Fluorescence of Organic Dyes in the Solid-State by Supramolecular Interactions

Fluorescent organic dyes play an essential role in the creation of new "smart" materials. Fragments and functional groups capable of free rotation around single bonds can significantly change the fluorescent organic dye's electronic structure under analyte effects, phase state transitions, or changes in temperature, pressure, and media polarity. Dependencies between steric and electronic structures become highly important in transition from a solution to a solid-state. Such transitions are accompanied by a significant increase in the dye molecular structure's rigidity due to supramolecular associates' formation such as H-bonding, π···π and dipole-dipole interactions. Among those supramolecular effects, H-bonding interactions, first of all, lead to significant molecular packing changes between loose or rigid structures, thus affecting the fluorescent dye's electronic states' energy and configuration, its fluorescent signal's position and intensity. All the functional groups and heteroatoms that are met in the organic dyes seem to be involved in the control of fluorescence via H-bonding: C-H···N, C-H···π, S = O···H-C, P = O···H, C-H···O, NH···N, C - H···C, C - H···Se, N-H···O, C - H···F, C-F···H. Effects of molecular packing of fluorescent organic dyes are successfully used in developing mechano-, piezo-, thermo- fluorochromes materials for their applications in the optical recording of information, sensors, security items, memory elements, organic light-emitting diodes (OLEDs) technologies.

Mechanical Force-Induced Blue-Shifted and Enhanced Emission for AIEgens

Mechanochromic (MC) luminescence of organic molecules has been emerging as a promising smart material for optical recording and memory devices. At the same time, pressure-induced blue-shifted and enhanced luminescence are rarely reported now. Herein, a series of cyanostilbene-based AIEgens with different substituents were synthesized to evaluate the influence of morphology transformation and push-pull electronic effect on the MC luminescence. Among these luminophores, compound 1 with one cyano group and diethylamino group was more susceptible to mechanical stimuli and obtained blue-shifted and enhanced fluorescence in response to anisotropic grinding. Powder X-ray diffraction patterns indicated that the MC behaviors were ascribed to the solid-state morphology transition from crystal-to-crystal. Analysis of crystal structures revealed that loose molecular packing is a key factor for high high-contrast MC luminescence. The smart molecular design, together with the excellent performance, verified that luminophores with twisted structures are ideal candidates for MC luminogens.

Push-Pull Structures Based on 2-Aryl/thienyl Substituted Quinazolin-4(3H)-ones and 4-Cyanoquinazolines

Design and synthesis of 2-(aryl/thiophen-2-yl)quinazolin-4(3H)-ones and 4-cyano-2-arylquinazolines with Et2N-, Ph2N- or carbazol-9-yl- electron donating fragment are described. The key photophysical properties of these compounds have been studied by UV/Vis absorption and fluorescence spectroscopy in solvents of different polarity (toluene and MeCN). 2-(Aryl/thiophen-2-yl)quinazolin-4(3H)-ones show fluorescence in blue-green region in toluene solution with quantum yields up to 89% in the case of 2-(4’-N,N-diphenylamino[1,1’-biphenyl]-4-yl)-quinazolin-4(3H)-one. Moreover, triphenylamino derivative based on quinazolin-4(3H)-one with para-phenylene linker displays the highest quantum yield of 40% in powder. The fluorescence QY of Et2N and Ph2N derivatives decrease when going from toluene to MeCN solution, whereas carbazol-9-yl counterparts demonstrate strengthening of intensity that emphasizes the strong influence of donor fragment nature on photophysical properties. 4-Cyanoquinazolines are less emissive in both solvents, as well as, in solid state. The introduction of cyano group into position 4 leads to orange/red colored powder and dual emission bands. Some molecules demonstrate the increase in emission intensity upon addition of water to MeCN solution. According to frontier molecular orbitals (HOMO, LUMO) calculations, the energy gap of 4-cyanoquinazoline decreases by more than 1 eV compared to quinazolin-4-one, that is consistent with experimental data.

Amphiphilicity-Controlled Polychromatic Emissive Supramolecular Self-Assemblies for Highly Sensitive and Efficient Artificial Light-Harvesting Systems

Dynamic sequential control of photoluminescence by supramolecular approaches has become a great issue in supramolecular chemistry. However, developing a systematic strategy to construct polychromatic photoluminescent supramolecular self-assemblies for improving the efficiency and sensitivity of artificial light-harvesting systems still remains a challenge. Here, a series of amphiphilicity-controlled supramolecular self-assemblies with polychromatic fluorescence based on lower-rim hexyl-modified sulfonatocalix[4]arene (SC4A6) and N-alkyl-modified p-phenylene divinylpyridiniums (PVPn, n = 2-7) as efficient light-harvesting platforms is reported. PVPn shows wide ranges of polychromatic fluorescence by co-assembling with SC4A6, whose emission trends significantly depend on the modified alkyl-chains of PVPn. The formed PVPn-SC4A6 co-assemblies as light-harvesting platforms are extremely sensitive for transferring the energy to two near-infrared emissive acceptors, Nile blue (NiB) and Rhodamine 800. After optimizing the amphiphilicity of PVPn-SC4A6 systems, the PVPn-SC4A6-NiB light-harvesting systems achieve an ultrasensitive working concentration for NiB (2 nm) and an ultrahigh antenna effect up to 91.0. Furthermore, the two different kinds of light-harvesting nanoparticles exhibit good performance on near-infrared imaging in the Golgi apparatus and mitochondria, respectively.

Synthesis of (Tricyanofuran-3-ylmethylene)hydrazinyl thiazole-containing chromophore, study of its photophysical properties, solvatochromism and TD-DFT computations

The chromophore 2-2-(3-cyano-5,5-dimethyl-4-((2-(thiazol-2-yl)hydrazono)methyl)-furan-2(5H)-ylidene)malononitrile (TzHTCF) was prepared by diazo-coupling of diazotized 2-aminothiazole with 3-cyano-2-(dicyanomethylene)-4,5,5-trimethylfuran (TCF). The TzHTCF absorption solvatochromism, in different polarity solvents, offered ΔE_max = +4.74 where the positive sign implied red shift occurrence and the TzHTCF lowest excited state was more polar than its ground one. While, the TzHTCF fluorescence spectrum afforded λ_em , in 416-670 nm range, and was more dependent on the solvent polarity than the absorption λ_max , despite both exhibited red shift by 24 and 254 nm, respectively. To discover the Stokes' shift ( ∆ ν ¯ ) behaviour of TzHTCF derivative, Lippert-Mataga and linear solvation-energy relationship (LSER) formulations have been utilized where the LSER displayed better results than the Lippert-Mataga (R² = 0. 9931). Furthermore, the LSER showed that the absorption and fluorescence solvatochromic behaviours were dependent on the solvent's hydrogen-bond donor (α) and acceptor (β), along with the solvent's polarizability (π*). Moreover, DFT calculations showed that TzHTCF has a planar configuration and its simulated absorption and emission spectra in DMSO revealed that λ_max was primarily originated from HOMO→LUMO and HOMO-1→LUMO transitions, respectively.

Triphenylamine, Carbazole or Tetraphenylethylene-Functionalized Benzothiadiazole Derivatives: Aggregation-Induced Emission (AIE), Solvatochromic and Different Mechanoresponsive Fluorescence Characteristics

The development of mechanochromic fluorophors with high-brightness, solid-state fluorescence is very significant and challenging. Herein, highly solid-state emissive triphenylamine, carbazole and tetraphenylethylene-functionalized benzothiadiazole derivatives were developed. These compounds showed remarkable aggregation-induced emission and solvatochromic fluorescence characteristics. Furthermore, these fluorogenic compounds also displayed different mechanically triggering fluorescence responses.

Mechanofluorochromism of 2-Biarylyl Cinchoninic Acids with High Sensitivity and Large Mechanochromic Shift

In recent years, organic mechanofluorochromism (MFC) materials have attracted wide attention in many fields. However, the exploration of MFC materials with high-contrast, high-sensitivity and high-responsiveness remains a challenge. Herein, a series of MFC materials with 2-biarylyl cinchoninic acid skeleton were successfully established, which are based on interconversion of classical/ frustrated Brönsted pairs. These compounds have the mechanochromic shift of up to 115 nm, as well as the property of stunning sensitivity and multiple responses to external mechanical force stimuli. The luminescence properties can be easily tuned by changing the substituents.

A Series of D-A-D Structured Disilane-Bridged Triads: Structure and Stimuli-Responsive Luminescence Studies

A series of σ-π extended octamethyltetrasilanes, which have phenothiazine, 9,9-dimethyl-9,10-dihydroacridine, or phenoxazine (1, 2, and 3) groups as donor moieties and thienopyrazine or benzothiadiazole (a and b) groups as acceptor fragments, has been prepared, and their optical properties have been studied as an extension of our work. All six compounds exhibited fluorescence in the solid state with maximum wavelengths centered in the range of 400 and 650 nm upon excitation by a UV lamp. Compound 2b showed apparent dual emission behavior in solution, which depends on solvent polarity, and a reversible photoluminescent change under mechanical and thermal stimuli in the solid state. Quantum chemical calculations suggest the contribution of a quasi-axial conformer of the 9,9-dimethyl-9,10-dihydroacridine moiety in 2b to the dual emission in solution and the mechanofluoroluminescence in the solid state, similarly to 1a. These studies provide new insight into the preparation of disilane-bridged triads capable of responding to multiple stimuli.