Ratiometric Photoacoustic Molecular Imaging for Methylmercury Detection in Living Subjects

Cavitation-on-a-Chip Enabled Size-Specific Liposomal Drugs for Selective Pharmacokinetics and Pharmacodynamics

The size of liposomal drugs has been demonstrated to strongly correlate with their pharmacokinetics and pharmacodynamics. While the microfluidic method successfully achieves the production of liposomes with well-controlled sizes across various buffer/lipid flow rate ratio (FRR) settings, any adjustments to the FRR inevitably influence the concentration, encapsulation efficiency (EE), and stability of liposomal drugs. Here we describe a controllable cavitation-on-a-chip (CCC) strategy that facilitates the precise regulation of liposomal drug size at any desired FRR. The CCC-enabled size-specific liposomes exhibited striking differences in uptake and biodistribution behaviors, thereby demonstrating distinct antitumor efficacy in both tumor-bearing animal and melanoma patient-derived organoid (PDO) models. Intriguingly, as the liposome size decreased to approximately 80 nm, the preferential accumulation of liposomal drugs in the liver transitioned to a predominant enrichment in the kidneys. These findings underscore the considerable potential of our CCC approach in influencing the pharmacokinetics and pharmacodynamics of liposomal nanomedicines.

Discovering a New Drug Against Acute Kidney Injury by Using a Tailored Photoacoustic Imaging Probe

Acute kidney injury (AKI) has become an increasing concern for patients due to the widespread clinical use of nephrotoxic drugs. Currently, the early diagnosis of AKI is still challenging and the available therapeutic drugs cannot meet the clinical demand. Herein, this work has investigated the key redox couple involved in AKI and develops a tailored photoacoustic (PA) imaging probe (AB-DiOH) which can reversibly respond to hypochlorite (ClO-)/glutathione (GSH) with high specificity and sensitivity. This probe enables the real-time monitoring of AKI by noninvasive PA imaging, with better detection sensitivity than the blood test. Furthermore, this probe is utilized for screening nephroprotective drugs among natural products. For the first time, astragalin is discovered to be a potential new drug for the treatment of AKI. After oral administration, astragalin can be efficiently absorbed by the animal body, alleviate kidney injury, and meanwhile induce no damage to other normal tissues. The treatment mechanism of astragalin has also been revealed to be the simultaneous inhibition of oxidative stress, ferroptosis, and cuproposis. The developed PA imaging probe and the discovered drug candidate provide a promising new tool and strategy for the early diagnosis and effective treatment of AKI.

A NIR-II Photoacoustic/NIR-IIa Fluorescent Probe for Targeted Imaging of Glioma under NIR-II Excitation

Fluorescence and photoacoustic (PA) imaging in the second near-infrared (NIR-II, 1000-1700 nm) window has garnered massive interest owing to high maximum permissible exposure of light, reduced autofluorescence, and improved deep penetration. However, active targeted NIR-II photoacoustic/NIR-IIa fluorescence imaging of glioma under NIR-II excitation has been seldom reported, which is partly ascribable to the lack of suitable materials. In this study, a small-molecule-based αvβ3-targeted NIR-II photoacoustic/NIR-IIa fluorescent probe IR-32p was generated and subsequently evaluated in U87MG tumor-bearing mice excited with NIR-I and NIR-II light. Exceptional dual-modal imaging properties such as good tumor uptake, high targeting specificity, and high tumor contrast were achieved in an orthotopic glioma model under 1020/1064 nm excitation, exhibiting a superior imaging depth of glioma through the skull. Our study introduces an outstanding dual-modal contrast agent with NIR-II absorption and confirms the superiority of NIR-II excitation over NIR-I in in vivo NIR-II/PA imaging.

Activatable Probes for Ratiometric Imaging of Endogenous Biomarkers In Vivo

Dynamic variations in the concentration and abnormal distribution of endogenous biomarkers are strongly associated with multiple physiological and pathological states. Therefore, it is crucial to design imaging systems capable of real-time detection of dynamic changes in biomarkers for the accurate diagnosis and effective treatment of diseases. Recently, ratiometric imaging has emerged as a widely used technique for sensing and imaging of biomarkers due to its advantage of circumventing the limitations inherent to conventional intensity-dependent signal readout methods while also providing built-in self-calibration for signal correction. Here, the recent progress of ratiometric probes and their applications in sensing and imaging of biomarkers are outlined. Ratiometric probes are classified according to their imaging mechanisms, and ratiometric photoacoustic imaging, ratiometric optical imaging including photoluminescence imaging and self-luminescence imaging, ratiometric magnetic resonance imaging, and dual-modal ratiometric imaging are discussed. The applications of ratiometric probes in the sensing and imaging of biomarkers such as pH, reactive oxygen species (ROS), reactive nitrogen species (RNS), glutathione (GSH), gas molecules, enzymes, metal ions, and hypoxia are discussed in detail. Additionally, this Review presents an overview of challenges faced in this field along with future research directions.

Cucurbit[8]uril-based water-dispersible assemblies with enhanced optoacoustic performance for multispectral optoacoustic imaging

Organic small-molecule contrast agents have attracted considerable attention in the field of multispectral optoacoustic imaging, but their weak optoacoustic performance resulted from relatively low extinction coefficient and poor water solubility restrains their widespread applications. Herein, we address these limitations by constructing supramolecular assemblies based on cucurbit[8]uril (CB[8]). Two dixanthene-based chromophores (DXP and DXBTZ) are synthesized as the model guest compounds, and then included in CB[8] to prepare host-guest complexes. The obtained DXP-CB[8] and DXBTZ-CB[8] display red-shifted and increased absorption as well as decreased fluorescence, thereby leading to a substantial enhancement in optoacoustic performance. Biological application potential of DXBTZ-CB[8] is investigated after co-assembly with chondroitin sulfate A (CSA). Benefiting from the excellent optoacoustic property of DXBTZ-CB[8] and the CD44-targeting feature of CSA, the formulated DXBTZ-CB[8]/CSA can effectively detect and diagnose subcutaneous tumors, orthotopic bladder tumors, lymphatic metastasis of tumors and ischemia/reperfusion-induced acute kidney injury in mouse models with multispectral optoacoustic imaging.

Recent Advances in Contrast-Enhanced Photoacoustic Imaging: Overcoming the Physical and Practical Challenges

For decades now, photoacoustic imaging (PAI) has been investigated to realize its potential as a niche biomedical imaging modality. Despite its highly desirable optical contrast and ultrasonic spatiotemporal resolution, PAI is challenged by such physical limitations as a low signal-to-noise ratio (SNR), diminished image contrast due to strong optical attenuation, and a lower-bound on spatial resolution in deep tissue. In addition, contrast-enhanced PAI has faced practical limitations such as insufficient cell-specific targeting due to low delivery efficiency and difficulties in developing clinically translatable agents. Identifying these limitations is essential to the continuing expansion of the field, and substantial advances in developing contrast-enhancing agents, complemented by high-performance image acquisition systems, have synergistically dealt with the challenges of conventional PAI. This review covers the past four years of research on pushing the physical and practical challenges of PAI in terms of SNR/contrast, spatial resolution, targeted delivery, and clinical application. Promising strategies for dealing with each challenge are reviewed in detail, and future research directions for next generation contrast-enhanced PAI are discussed.

Photoacoustic Imaging Probes for Theranostic Applications

Photoacoustic imaging (PAI), an emerging biomedical imaging technology, capitalizes on a wide range of endogenous chromophores and exogenous contrast agents to offer detailed information related to the functional and molecular content of diseased biological tissues. Compared with traditional imaging technologies, PAI offers outstanding advantages, such as a higher spatial resolution, deeper penetrability in biological tissues, and improved imaging contrast. Based on nanomaterials and small molecular organic dyes, a huge number of contrast agents have recently been developed as PAI probes for disease diagnosis and treatment. Herein, we report the recent advances in the development of nanomaterials and organic dye-based PAI probes. The current challenges in the field and future research directions for the designing and fabrication of PAI probes are proposed.

Biomedical Photoacoustic Imaging for Molecular Detection and Disease Diagnosis: "Always-On" and "Turn-On" Probes

Photoacoustic (PA) imaging is a nonionizing, noninvasive imaging technique that combines optical and ultrasonic imaging modalities to provide images with excellent contrast, spatial resolution, and penetration depth. Exogenous PA contrast agents are created to increase the sensitivity and specificity of PA imaging and to offer diagnostic information for illnesses. The existing PA contrast agents are categorized into two groups in this review: "always-on" and "turn-on," based on their ability to be triggered by target molecules. The present state of these probes, their merits and limitations, and their future development, is explored.

Chemical Design of Activatable Photoacoustic Probes for Precise Biomedical Applications

Photoacoustic (PA) imaging technology, a three-dimensional hybrid imaging modality that integrates the advantage of optical and acoustic imaging, has great application prospects in molecular imaging due to its high imaging depth and resolution. To endow PA imaging with the ability for real-time molecular visualization and precise biomedical diagnosis, numerous activatable molecular PA probes which can specifically alter their PA intensities upon reacting with the targets or biological events of interest have been developed. This review highlights the recent developments of activatable PA probes for precise biomedical applications including molecular detection of the biotargets and imaging of the biological events. First, the generation mechanism of PA signals will be given, followed by a brief introduction to contrast agents used for PA probe design. Then we will particularly summarize the general design principles for the alteration of PA signals and activatable strategies for developing precise PA probes. Furthermore, we will give a detailed discussion of activatable PA probes in molecular detection and biomedical imaging applications in living systems. At last, the current challenges and outlooks of future PA probes will be discussed. We hope that this review will stimulate new ideas to explore the potentials of activatable PA probes for precise biomedical applications in the future.

Advanced NIR ratiometric probes for intravital biomedical imaging

Near-infrared (NIR) fluorescence imaging technology (NIR-I region, 650-950 nm and NIR-II region, 1000-1700 nm), with deeper tissue penetration and less disturbance from auto-fluorescence than that in visible region (400-650 nm), is playing a more and more extensive role in the field of biomedical imaging. With the development of precise medicine, intelligent NIR fluorescent probes have been meticulously designed to provide more sensitive, specific and accurate feedback on detection. Especially, recently developed ratiometric fluorescent probes have been devoted to quantify physiological and pathological parameters with a combination of responsive fluorescence changes and self-calibration. Herein, we systemically introduced the construction strategies of NIR ratiometric fluorescent probes and their applications in biological imagingin vivo, such as molecular detection, pH and temperature measurement, drug delivery monitoring and treatment evaluation. We further summarized possible optimization on the design of ratiometric probes for quantitative analysis with NIR fluorescence, and prospected the broader optical applications of ratiometric probes in life science and clinical translation.

Acoustics at the nanoscale (nanoacoustics): A comprehensive literature review.: Part II: Nanoacoustics for biomedical imaging and therapy

In the past decade, acoustics at the nanoscale (i.e., nanoacoustics) has evolved rapidly with continuous and substantial expansion of capabilities and refinement of techniques. Motivated by research innovations in the last decade, for the first time, recent advancements of acoustics-associated nanomaterials/nanostructures and nanodevices for different applications are outlined in this comprehensive review, which is written in two parts. As part II of this two-part review, this paper concentrates on nanoacoustics in biomedical imaging and therapy applications, including molecular ultrasound imaging, photoacoustic imaging, ultrasound-mediated drug delivery and therapy, and photoacoustic drug delivery and therapy. Firstly, the recent developments of nanosized ultrasound and photoacoustic contrast agents as well as their various imaging applications are examined. Secondly, different types of nanomaterials/nanostructures as nanocarriers for ultrasound and photoacoustic therapies are discussed. Finally, a discussion of challenges and future research directions are provided for nanoacoustics in medical imaging and therapy.

A H2O2-activatable nanoprobe for diagnosing interstitial cystitis and liver ischemia-reperfusion injury via multispectral optoacoustic tomography and NIR-II fluorescent imaging

Developing high-quality NIR-II fluorophores (emission in 1000-1700 nm) for in vivo imaging is of great significance. Benzothiadiazole-core fluorophores are an important class of NIR-II dyes, yet ongoing limitations such as aggregation-caused quenching in aqueous milieu and non-activatable response are still major obstacles for their biological applications. Here, we devise an activatable nanoprobe to address these limitations. A molecular probe named BTPE-NO₂ is synthesized by linking a benzothiadiazole core with two tetraphenylene groups serving as hydrophobic molecular rotors, followed by incorporating two nitrophenyloxoacetamide units at both ends of the core as recognition moieties and fluorescence quenchers. An FDA-approved amphiphilic polymer Pluronic F127 is then employed to encapsulate the molecular BTPE-NO₂ to render the nanoprobe BTPE-NO₂@F127. The pathological levels of H₂O₂ in the disease sites cleave the nitrophenyloxoacetamide groups and activate the probe, thereby generating strong fluorescent emission (950~1200 nm) and ultrasound signal for multi-mode imaging of inflammatory diseases. The nanoprobe can therefore function as a robust tool for detecting and imaging the disease sites with NIR-II fluorescent and multispectral optoacoustic tomography (MSOT) imaging. Moreover, the three-dimensional MSOT images can be obtained for visualizing and locating the disease foci.

3D Printed Integrated Multi-Layer Microfluidic Chips for Ultra-High Volumetric Throughput Nanoliposome Preparation

Although microfluidic approaches for liposomes preparation have been developed, fabricating microfluidic devices remains expensive and time-consuming. Also, owing to the traditional layout of microchannels, the volumetric throughput of microfluidics has been greatly limited. Herein an ultra-high volumetric throughput nanoliposome preparation method using 3D printed microfluidic chips is presented. A high-resolution projection micro stereolithography (PμSL) 3D printer is applied to produce microfluidic chips with critical dimensions of 400 µm. The microchannels of the microfluidic chip adopt a three-layer layout, achieving the total flow rate (TFR) up to 474 ml min⁻¹, which is remarkably higher than those in the reported literature. The liposome size can be as small as 80 nm. The state of flows in microchannels and the effect of turbulence on liposome formation are explored. The experimental results demonstrate that the 3D printed integrated microfluidic chip enables ultra-high volumetric throughput nanoliposome preparation and can control size efficiently, which has great potential in targeting drug delivery systems.

Rotating the C-N Bond in a Coumarin-Pyridine-Based Sensor for Pattern Recognition of Versatile Metal Ions

A cross-reactive sensor array is powerful for high-throughput discrimination of various kinds of metal ions. However, the construction of a multicomponent sensor array is always time-consuming and cost-ineffective. Herein, a practical four-component X1-based sensor array (X1SA) was obtained by simply dissolving a single dye molecule X1 in respective solvents such as methanol, ethanol, dimethyl sulfoxide, and acetonitrile. In this design, X1 exhibits strong solvatochromic fluorescence properties via an excited-state intramolecular proton transfer and intramolecular charge transfer combined mechanism. Moreover, rotation of the C-N bond between the pyridine and coumarin units in X1 enabled it to coordinate with metal ions through different binding modes, which acted as an additional dimension of the sensor array. Inspired by this C-N bond rotation strategy, X1SA was determined to be powerful in discriminating 20 kinds of metal ions in both phosphate-buffered saline and 5% serum media in a range of 0.1-100 μM. In addition, the sensor array was also successfully applied in differentiating similar and mixed metal ions such as Fe³⁺/Fe²⁺, Cd²⁺/Hg²⁺, and Sn²⁺/Pb²⁺ in serum samples, which is meaningful for investigating the biological roles of iron and early diagnosis of related metal poisoning accidents.

A General Approach to Convert Hemicyanine Dyes into Highly Optimized Photoacoustic Scaffolds for Analyte Sensing*

Most photoacoustic (PA) imaging agents are based on the repurposing of existing fluorescent dye platforms that exhibit non-optimal properties for PA applications. Herein, we introduce PA-HD, a new dye scaffold optimized for PA probe development that features a 4.8-fold increase in sensitivity and a red-shift of the λabs from 690 nm to 745 nm to enable ratiometric imaging. Computational modeling was used to elucidate the origin of these enhanced properties. To demonstrate the generalizability of our remodeling efforts, we developed three probes for β-galactosidase activity (PA-HD-Gal), nitroreductase activity (PA-HD-NTR), and H2 O2 (PA-HD-H2 O2 ). We generated two cancer models to evaluate PA-HD-Gal and PA-HD-NTR. We employed a murine model of Alzheimer's disease to test PA-HD-H2 O2 . There, we observed a PA signal increase at 735 nm of 1.79±0.20-fold relative to background, indicating the presence of oxidative stress. These results were confirmed via ratiometric calibration, which was not possible using the parent HD platform.

NIR-II Photoacoustic Reporter for Biopsy-Free and Real-Time Assessment of Wilson's Disease

Wilson's disease (WD) is a rare inherited disorder of copper metabolism with pathological copper hyperaccumulation in some vital organs. However, the clinical diagnosis technique of WD is complicated, aggressive, and time-consuming. In this work, a novel ratiometric photoacoustic (PA) imaging nanoprobe in the NIR-II window is developed to achieve noninvasive, rapid, and accurate Cu²⁺ quantitative detection in vitro and in vivo. The nanoprobe consists of Cu²⁺ -responsive IR970 dye and a nonresponsive palladium-coated gold nanorod (AuNR-Pd), achieving a concentration-dependent ratiometric PA₉₇₀ /PA₁₂₆₀ signal change. The urinary Cu²⁺ content is detectable within minutes down to a detection limit of 76 × 10^-9 m. This report acquisition time is several orders of magnitude shorter than those of existing detection approaches requiring complex procedure. Moreover, utilizing the ratiometric PA nanoprobe, PA imaging enables biopsy-free measurement of the liver Cu²⁺ content and visualization of the liver Cu²⁺ biodistribution of WD patient, which avoid the body injury during the clinical Cu²⁺ test using liver biopsy method. The NIR-II ratiometric PA detection method is simple and noninvasive with super precision, celerity, and simplification, which holds great promise as an alternative to liver biopsy for clinical diagnosis of WD.

Activatable Photoacoustic Probe for In Situ Imaging of Endogenous Carbon Monoxide in the Murine Inflammation Model

Photoacoustic (PA) imaging is an emerging biomedical imaging modality that combines the advantages of optical and ultrasound imaging. Carbon monoxide (CO), which is a vital endogenous cell-signaling molecule in the human body, exerts critical physiological functions such as anti-inflammatory, antiapoptotic, and antiproliferative. The imbalance of CO homeostasis is also associated with numerous diseases. Therefore, it is critically important to noninvasively monitor the steady-state changes of CO in vivo. However, the activatable photoacoustic (PA) probes for detecting CO-associated complicated diseases have not yet developed. In this work, we developed the first turn-on PA probe (MTR-CO) to visualize the CO level in the lipopolysaccharide (LPS)-induced acute inflammation murine model through PA imaging technology. MTR-CO is composed of a near-infrared absorption cyanine-like dye (MTR-OH) and allyl formate, showing a 10.2-fold PA signal enhancement at 690 nm upon activation by CO. Furthermore, the results revealed that MTR-CO has high sensitivity, excellent specificity, and good biocompatibility for CO in vivo. MTR-CO was then applied for PA imaging of CO in cells and for monitoring the development of acute inflammation in the murine model by tracking the changes of the CO level. These findings provide a promising strategy for accurately detecting the steady-state changes of CO in living organisms.

Responsive optical probes for deep-tissue imaging: Photoacoustics and second near-infrared fluorescence

Optical imaging has played a vital role in development of biomedicine and image-guided theragnostic. Nevertheless, the clinical translation of optical molecular imaging for deep-tissue visualization is still limited by poor signal-to-background ratio and low penetration depth owing to light scattering and tissue autofluorescence. Hence, to facilitate precise diagnosis and accurate surgery excision in clinical practices, the responsive optical probes (ROPs) are broadly designed for specific reaction with biological analytes or disease biomarkers via chemical/physical interactions for photoacoustic and second near-infrared fluorescence (NIR-II, 900-1700 nm) fluorescence imaging. Herein, the recent advances in the development of ROPs including molecular design principles, activated mechanisms and treatment responses for photoacoustic and NIR-II fluorescence imaging are reviewed. Furthermore, the present challenges and future perspectives of ROPs for deep-tissue imaging are also discussed.

Dual Ratiometric SERS and Photoacoustic Core-Satellite Nanoprobe for Quantitatively Visualizing Hydrogen Peroxide in Inflammation and Cancer

Excessive production of oxidative species alters the normal redox balance and leads to diseases, such as chronic inflammation and cancer. Oxidative species are short-lived species, which makes direct, precise, and real-time measurements difficult. Herein, we report a novel core-satellite gold nanostructure for dual, ratiometric surface-enhanced Raman scattering (SERS) and photoacoustic (PA) imaging to enable the precise detection of inflammation/cancer-related H₂ O₂ . The combination of H₂ O₂ -activated second near-infrared (NIR-II) PA imaging and SERS imaging enables the differentiation between the inflamed region and normal tissue with high accuracy. The mesoporous silica shell of the nanoprobe could be used to deliver drugs to the target area to precisely treat disease. Therefore, this core-satellite nanostructure can not only quantitatively and precisely monitor H₂ O₂ produced in inflammation, tumor, and osteoarthritis in rabbits in real-time, but can also be used to track the progress of the anti-inflammatory treatment in real-time.

Real-Time Quantification of Cartilage Degeneration by GAG-Targeted Cationic Nanoparticles for Efficient Therapeutic Monitoring in Living Mice

One of the characterizations of degenerative cartilage disease is the progressive loss of glycosaminoglycans (GAGs). The real-time imaging method to quantify GAGs is of great significance for the biochemical analysis of cartilage and diagnosis and therapeutic monitoring of cartilage degeneration in vivo. To this end, a cationic photoacoustic (PA) contrast agent, poly-l-lysine melanin nanoparticles (PLL-MNPs), specifically targeting anionic GAGs was developed in this study to investigate whether it can image cartilage degeneration. PLL-MNP assessed GAG depletion by Chondroitinase ABC in vitro rat cartilage and intact ex vivo mouse knee joint. A papain-induced cartilage degenerative mice model was used for in vivo photoacoustic imaging (PAI). Oral cartilage supplement glucosamine sulfate was intragastrically administered for mice cartilage repair and the therapeutic efficacy was monitored by PLL-MNP-enhanced PAI. Histologic findings were used to further confirm PAI results. In vitro results revealed that the PLL-MNPs not only had a high binding ability with GAGs but also sensitively monitored GAG content changes by PAI. The PA signal was gradually weakened along with the depletion of GAGs in cartilage. Particularly, PLL-MNPs depicted the cartilage structure and the distribution of GAGs was demonstrated in PA images in ex vivo joints. Compared with the normal joint, a lower signal intensity was detected from degenerative joint at 3 weeks after papain injection, suggesting an early diagnosis of cartilage lesion by PLL-MNPs. Importantly, this PA-enhanced nanoprobe was suitable for monitoring in vivo efficacy of glucosamine sulfate, which effectively blocked cartilage degradation in a high dose manner. In vivo imaging findings correlated well with histological examinations. PLL-MNPs provided sensitive visualization of cartilage degeneration and promising monitoring of therapeutic response in living subjects.

A dual-round signal amplification strategy for colorimetric/photoacoustic/fluorescence triple read-out detection of prostate specific antigen

The detection of prostate specific antigen (PSA) is extremely important for the early diagnosis of prostate cancer. Herein, we report a dual-round signal amplification strategy for colorimetric/fluorescence/photoacoustic triple read-out detection of PSA using a silica coated Au@Ag core-shell nanorod (denoted Au@Ag@SiO2) based enzyme-linked immunosorbent assay (ELISA) system. In the presence of PSA, monoclonal primary antihuman PSA antibody (Ab1) captured PSA and was subsequently recognized by the secondary antihuman PSA detection antibody (Ab2) which was conjugated with glucose oxidase (GOx) functionalized magnetic beads (MBs) for signal amplification, then GOx catalyses the addition of glucose to generate hydrogen peroxide that etches the silver layer in Au@Ag@SiO2, thus producing abundant Ag+ to realize the second signal amplification. With the degradation of the silver layer, an obvious color change (green-to-pink) of the Au@Ag@SiO2 solution could be observed by the naked eye and its surface plasmon resonance (SPR) absorption had a red-shift, enhancing photoacoustic signal read-out at 780 nm. Additionally, the released Ag+ was caught by a Ag+-fluorescent probe (Ag+-FP) for enhanced fluorescence signal read-out. These results suggested that this ELISA system achieves a triple read-out detection of PSA. This work provides a promising strategy for multiple read-out detection of biomarkers, which has great potential in clinical diagnosis.

Design Strategies of Photoacoustic Molecular Probes

Photoacoustic (PA) probes have been developed very quickly and applied in broad areas in recent years. Most of them are constructed based on organic dyes with intrinsic near-infrared (NIR) absorption properties. To increase PA contrast and improve imaging resolution and the sensitivity of detection, various methods for the design of PA probes have been developed. This minireview mainly focuses on the development and design strategies of activatable small-molecule PA probes in four aspects: reaction-cleavage, metal ion chelation, photoswitch, and protonation-deprotonation. It highlights some key points of designing PA probes corresponding to their properties and applications. The challenges and perspectives for small-molecule PA probes are also discussed.

Tuning molecular aggregation to achieve highly bright AIE dots for NIR-II fluorescence imaging and NIR-I photoacoustic imaging

Currently, bright aggregation-induced emission luminogens (AIEgens) with high photoluminescence quantum yields (PLQYs) in the NIR-II region are still limited, and thus an efficient strategy to enhance NIR-II fluorescence performance through tuning molecular aggregation is proposed here. The synthesized donor-acceptor tailored AIEgen (DTPA-TBZ) not only exhibits an excellent absorptivity in the NIR-I region, but also good fluorescence signals in the NIR-II region with an emission extending to 1200 nm. Benefiting from such improved intramolecular restriction and aggregation, a significant absolute PLQY value of 8.98% was obtained in solid DTPA-TBZ. Encouragingly, the resulting AIE dots also exhibit a high relative PLQY of up to 11.1% with IR 26 as the reference (PLQY = 0.5%). Finally, the AIE dots were applied in high performance NIR-II fluorescence imaging and NIR-I photoacoustic (PA) imaging: visualization of abdominal vessels, hind limb vasculature, and cerebral vessels with high signal to background ratios was performed via NIR-II imaging; Moreover, PA imaging has also been performed to clearly observe tumors in vivo. These results demonstrate that by finely tuning molecular aggregation in DTPA-TBZ, a good NIR-I absorptivity and a highly emissive fluorescence in the NIR-II region can be achieved simultaneously, finally resulting in a promising dual-modal imaging platform for real-world applications to achieve precise cancer diagnostics.

16-Mer ferritin-like protein templated gold nanoclusters for bioimaging detection of methylmercury in the brain of living mice

Methylmercury (MeHg⁺) as one of the most potent neurotoxins is mainly accumulated in brain, so in vivo imaging detection of MeHg⁺ in brain is of crucial importance. Herein, we reported a photoluminescent nanosensor for MeHg⁺ detection in brain by integrating the bioimaging of gold nanoclusters (Au NCs), the fluorescence of Au NCs quenched by MeHg⁺, and the brain targeting feature of our recently constructed 16-mer shell-like protein (7A). First, Au NCs with 7A as a biotemplate (7A-Au NCs) by a facile and green method in water are fabricated for the first time, the fluorescence of which (∼650 nm) can be quenched by MeHg⁺ in a dose-dependent manner in vitro. Second, the as-prepared 7A-Au NCs are not only suitable for bioimaging of BBB endothelial cells, but also are an effective probe for bioimaging MeHg⁺ detection in a brain-specific manner. These findings open a door for MeHg⁺ detection in the brain of living subjects.

Peptide-modulated self-assembly as a versatile strategy for tumor supramolecular nanotheranostics

Advances in supramolecular self-assembly have promoted the development of theranostics, the combination of both therapeutic and diagnostic functions in a single nanoplatform, which is closely associated with antitumor applications and has shown promising potential in personalized medicine. Peptide-modulated self-assembly serves as a versatile strategy for tumor supramolecular nanotheranostics possessing controllability, programmability, functionality and biosafety, thus promoting the translation of nanotheranostics from bench to bedside. In this review, we will focus on the self-assembly of peptide-photosensitizers and peptide-drugs as well as multicomponent cooperative self-assembly for the fabrication of nanotheranostics that integrate diagnosis and therapeutics for antitumor applications. Emphasis will be placed on building block design, interaction strategies and the potential relationships between their structures and properties, aiming to increase understanding of the critical role of peptide-modulated self-assembly in advancing antitumor supramolecular nanotheranostics.

A Versatile Theranostic Nanoemulsion for Architecture-Dependent Multimodal Imaging and Dually Augmented Photodynamic Therapy

To design a clinically translatable nanomedicine for photodynamic theranostics, the ingredients should be carefully considered. A high content of nanocarriers may cause extra toxicity in metabolism, and multiple theranostic agents would complicate the preparation process. These issues would be of less concern if the nanocarrier itself has most of the theranostic functions. In this work, a poly(ethylene glycol)-boron dipyrromethene amphiphile (PEG-F₅₄ -BODIPY) with 54 fluorine-19 (¹⁹ F) is synthesized and employed to emulsify perfluorohexane (PFH) into a theranostic nanoemulsion (PFH@PEG-F₅₄ -BODIPY). The as-prepared PFH@PEG-F₅₄ -BODIPY can perform architecture-dependent fluorescence/photoacoustic/¹⁹ F magnetic resonance multimodal imaging, providing more information about the in vivo structure evolution of nanomedicine. Importantly, this nanoemulsion significantly enhances the therapeutic effect of BODIPY through both the high oxygen dissolving capability and less self-quenching of BODIPY molecules. More interestingly, PFH@PEG-F₅₄ -BODIPY shows high level of tumor accumulation and long tumor retention time, allowing a repeated light irradiation after a single-dose intravenous injection. The "all-in-one" photodynamic theranostic nanoemulsion has simple composition, remarkable theranostic efficacy, and novel treatment pattern, and thus presents an intriguing avenue to developing clinically translatable theranostic agents.

A conjugated-polymer-based ratiometric nanoprobe for evaluating in-vivo hepatotoxicity induced by herbal medicine via MSOT imaging

Herbal medicines are widely used around the world, while some of them are associated with adverse effects like herb-induced liver injury due to oxidative/nitrosative stress resulted from hepatically-generated ROS/RNS. It is of significance to accurately evaluate herbal-medicine-induced hepatotoxicity, since it would help provide effective monitoring method of the safety of herbal remedies. Herein we designed a ratiometric nanoprobe for in vivo imaging hepatic injury induced by herbal medicine (polygonum multiflorum, PM) via specifically responding to NO generated in liver by PM, and with MSOT imaging the precise location of liver injury can be identified. The liposomal nanoprobe consists of a responsive dye (IX-2NH₂) which could specifically respond to NO and the diketopyrrolopyrrole-based conjugated polymer (DPP-TT) as the internal reference. Thus we can realize ratiometric optoacoustic detection of herbal-medicine-induced liver injury with 3D information in mouse model in a noninvasive way.

Cancer Cell Membrane Camouflaged Nanoprobe for Catalytic Ratiometric Photoacoustic Imaging of MicroRNA in Living Mice

Herein, a cancer cell (MCF-7 cell) membrane-encapsulated dendritic mesoporous silica nanoparticle simultaneously functionalized with DNA-photoacoustic (DNA-PA) probes and glutathione (GSH)-responsive DNA fuel strands for PA imaging of tumor-related miRNA in living mice with signal amplification ability is developed. It is demonstrated that one target miRNA can trigger disassembly of multiple PA fluorophore probes from the quencher with the aid of GSH-responsive DNA fuel strands via the entropy-driven process, resulting remarkable amplified change of PA signal ratio. Using oncogenic miRNA-21 as a model, a linear relationship between miRNA-21 concentrations and PA ratio in a dynamic range from 10 × 10^-12 m to 100 × 10^-9 m and a limit of detection down to 11.69 × 10^-12 m are established. The accurate PA signal observation related to miRNA-21s in the tumor area in living mice is demonstrated, and the PA signal ratio increases significantly via the injection of miRNA-21. It is anticipated that the catalytic ratiometric PA imaging system can be applied to an array of molecular detection in living system by rational detection probe design.

Photoacoustic Imaging: Contrast Agents and Their Biomedical Applications

Photoacoustic (PA) imaging as a fast-developing imaging technique has great potential in biomedical and clinical applications. It is a noninvasive imaging modality that depends on the light-absorption coefficient of the imaged tissue and the injected PA-imaging contrast agents. Furthermore, PA imaging provides superb contrast, super spatial resolution, and high penetrability and sensitivity to tissue functional characteristics by detecting the acoustic wave to construct PA images. In recent years, a series of PA-imaging contrast agents are developed to improve the PA-imaging performance in biomedical applications. Here, recent progress of PA contrast agents and their biomedical applications are outlined. PA contrast agents are classified according to their components and function, and gold nanocrystals, gold-nanocrystal assembly, transition-metal chalcogenides/MXene-based nanomaterials, carbon-based nanomaterials, other inorganic imaging agents, small organic molecules, semiconducting polymer nanoparticles, and nonlinear PA-imaging contrast agents are discussed. The applications of PA contrast agents as biosensors (in the sensing of metal ions, pH, enzymes, temperature, hypoxia, reactive oxygen species, and reactive nitrogen species) and in bioimaging (lymph nodes, vasculature, tumors, and brain tissue) are discussed in detail. Finally, an outlook on the future research and investigation of PA-imaging contrast agents and their significance in biomedical research is presented.

In Vivo Chemoselective Photoacoustic Imaging of Copper(II) in Plant and Animal Subjects

The detection of Cu2+ in living plants and animals is of great importance for environment monitoring and disease diagnosis. Here, a near-infrared (NIR) turn-on photoacoustic (PA) probe (denoted as LET-2) is developed for Cu2+ detection in living subjects, such as soybean sprouts and mice. The absorbance band of LET-2 shifts from 625 to 715 nm after the interaction with Cu2+ , thus producing strong PA signal output at 715 nm (PA715 ) as an indicator. The PA715 value is increased as a function of the concentration of Cu2+ (0 × 10-6 -20 × 10-6 m), with a calculated limit of detection of 10.8 × 10-9 m. More importantly, both in vitro and in vivo studies in soybean sprouts and mice indicate that the as-prepared LET-2 PA probe is highly sensitive and selective for Cu2+ detection. These findings provide a solution for in vivo detection of metal ions by using chemoselective PA probes.

Ratiometric Photoacoustic Nanoprobe for Bioimaging of Cu2

Aberrant copper contents implicate numerous diseases including Alzheimer's disease and Wilson's disease. Conventional copper detection technologies are difficult to offer non-invasive and accurate deep tissue detection of copper. Here, we report a photoacoustic (PA) nanoprobe (NRh-IR-NMs) for ratiometric PA imaging of Cu²⁺. The nanoprobe consists of a selective Cu²⁺-responsive probe (NRh) as the indicator and a nonresponsive dye (IR) as the internal reference. In the presence of Cu²⁺, a selective Cu²⁺-induced structure change of NRh would take place, resulting in the increase of PA signal intensity increment at 716 nm (ΔPA716). However, the ΔPA834 which attributes to IR shows negligible change. Therefore, the ratiometric PA signal (ΔPA716/ΔPA834) could be used as an indicator for Cu²⁺ detection. This ratiometric PA detection method offers a noninvasive technology with high selectivity and tissue penetration depth, which is a promising tool for deep-tissue detection of Cu²⁺ in living organisms.

A small-molecule probe for ratiometric photoacoustic imaging of hydrogen sulfide in living mice

A small molecule ratiometric photoacoustic probe was developed for real-time monitoring of hydrogen sulfide in living mice.

Stimuli-Responsive Nanotheranostics for Real-Time Monitoring Drug Release by Photoacoustic Imaging

Molecular photoacoustic imaging (PA) is a promising technology to understand tumor pathology and guide precision therapeutics. Despite the capability of activatable PA probes to image tumor-specific biomarkers, limitations in their molecular structure hamper them from effective drug delivery and the drug release monitoring. Herein, we developed a perylene diimide (PDI) based theranostic platform that provides noninvasive PA imaging signals to monitor tumor-specific pH-responsive drug release.

Methods: we first designed and synthesized an acid-responsive amine-substituted PDI derivative. The pH sensitive properties of the PDI was demonstrated by density functional theory (DFT) calculations, UV-vis experiments and PA studies. The theranostic platform (THPDINs) was fabricated by self-assembly of the acid-responsive PDI, a pH irrelevant IR825 dye, and anti-cancer drug doxorubicin (DOX). The PA properties in various pH environment, drug delivery, cytotoxicity, cell uptake, ratiometric PA imaging and anti-tumor efficacy of the THPDINs were investigated in vitro and in vivo by using U87MG glioma cell line and U87MG tumor model.

Results: We found that our designed PDI was sensitive to the tumor specific pH environment, reflected by absorbance shift, PA intensity and aggregation morphology changes in aqueous solution. The as-synthesized pH sensitive PDI acted as a molecular switch in the THPDINs, in which the switch can be triggered in the mild acidic tumor microenvironment to accelerate DOX release. Meanwhile, the DOX release could be monitored by ratiometric PA imaging.

Conclusions: We developed a multifunctional PDI based theranostic platform for noninvasive real-time ratiometric PA imaging of tumor acidic pH and monitoring of drug release in living mice simultaneously. This strategy will shed light on the development of smart activatable theranostic nanoplatforms and will significantly advance the application of PA theranostics in biology and medicine.

Organic Semiconducting Polymer Nanoparticles for Photoacoustic Labeling and Tracking of Stem Cells in the Second Near-Infrared Window

Photoacoustic (PA) imaging and tracking of stem cells plays an important role in the real-time assessment of cell-based therapies. Nevertheless, the limitations of conventional inorganic PA contrast agents and the narrow range of the excitation wavelength in the first near-infrared (NIR-I) window hamper the applications of PA imaging in living subjects. Herein, we report the design and synthesis of a second near-infrared (NIR-II) absorptive organic semiconducting polymer (OSP)-based nanoprobe (OSPN⁺) for PA imaging and tracking of stem cells. Comparison studies in biological tissue show that NIR-II light excited PA imaging of the OSPN⁺ has significantly higher signal-to-noise ratio than NIR-I light excited PA imaging, thereby demonstrating the superiority of the OSPN⁺ for deep tissue imaging. With good biocompatibility, appropriate size, and optimized surface property, the OSPN⁺ shows enhanced cellular uptake for highly efficient PA labeling of stem cells. In vivo investigations reveal significant NIR-II PA contrast enhancement of the transplanted OSPN⁺-labeled human mesenchymal stem cells by 40.6- and 21.7-fold in subcutaneous and brain imaging, respectively, compared with unlabeled cases. Our work demonstrates a class of OSP-based nanomaterials for NIR-II PA stem cell imaging to facilitate a better understanding and evaluation of stem cell-based therapies.

Gadolinium Metallofullerene-Polypyrrole Nanoparticles for Activatable Dual-Modal Imaging-Guided Photothermal Therapy

Accurate diagnosis of tumor is promising to guide photothermal therapy (PTT) for efficacious tumor ablation with minimal damage to healthy tissues. Here, we report an activatable dual-modal imaging agent, which is based on PEGylated-gadolinium metallofullerene-polypyrrole nanoparticle (PEG-GMF-PPy NP) for imaging-guided PTT. A contrast agent (gadolinium metallofullerene, GMF) with excellent magnetic resonance imaging (MRI) performance and an ultra-pH-responsive polymer (PEG-PC7A) are successively modified to the surface of photothermal agent (PPy NP). The prepared PEG-GMF-PPy NPs show strong absorption in the near-infrared (NIR) region, so they can be utilized for photoacoustic imaging. Furthermore, in a tumor extracellular environment, the PEG-GMF-PPy NPs can achieve pH-enhanced MRI because of the hydrophobic-to-hydrophilic conversion of the PC7A. Upon accurate diagnosis-guided NIR laser irradiation, excellent tumor ablation effect is achieved. The results suggest that the PEG-GMF-PPy NPs are promising agents for activatable imaging-guided PTT.

Recent progress in photoacoustic molecular imaging

By acoustically detecting the optical absorption contrast, photoacoustic (PA) tomography (PAT) has broken the penetration limits of traditional high-resolution optical imaging. Through spectroscopic analysis of the target's optical absorption, PAT can identify a wealth of endogenous and exogenous molecules and thus is inherently capable of molecular imaging with high sensitivity. PAT's molecular sensitivity is uniquely accompanied by non-ionizing radiation, high spatial resolution, and deep penetration in biological tissues, which other optical imaging modalities cannot achieve yet. In this concise review, we summarize the most recent technological advancements in PA molecular imaging and highlight the novel molecular probes specifically made for PAT in deep tissues. We conclude with a brief discussion of the opportunities for future advancements.

Ratiometric photoacoustic nanoprobes for monitoring and imaging of hydrogen sulfide in vivo

Detection and visualization of hydrogen sulphide (H2S) is crucial for understanding its physiological and pathological roles towards human health and diseases, but precisely tracking of H2S in vivo remains challenging due to the limitations of available analytical methods. In this study, we developed a novel ratiometric photoacoustic (PA) nanoprobe for selective detection and imaging of H2S in biological fluids, live cells, brain tissues and animals. The nanoprobe AzHD-LP was fabricated by encapsulation of a newly synthesized H2S-responsive near-infrared (NIR) dye (AzHD) within a liposome (LP). The as-prepared AzHD-LP exhibits a dramatically red-shift response of its absorption peak after reduction reaction of AzHD with H2S: the absorbance of AzHD-LP centered at 600 and 700 nm is decreased and increased, respectively, producing a turn-on ratiometric PA signal in the presence of H2S. Typically, under the excitation of a 532 nm and 700 nm pulsed laser, the selective detection and imaging of H2S was achieved in aqueous solution, living cells and brain tissues of Alzheimer's diseased mice. Moreover, after AzHD-LP conjugated with a tumor-targeting peptide - c(RGDyK) as RGD-AzHD-LP - ratiometric PA mapping of the intratumoral generated H2S in the HCT116 colon tumor-bearing live mice was demonstrated.

Photoacoustic Probes for Molecular Detection: Recent Advances and Perspectives

Photoacoustic (PA) imaging (PAI) is a noninvasive and nonionizing biomedical imaging modality that combines the advantages of optical imaging and ultrasound imaging. Based on PAI, photoacoustic detection (PAD) is an emerging approach that is involved with the interaction between PA probes and analytes resulting in the changes of photoacoustic signals for molecular detection with rich contrast, high resolution, and deep tissue penetration. This Review focuses on the recent development of PA probes in PAD. The following contents will be discussed in detail: 1) the construction of PA probes; 2) the applications and mechanisms of PAD to different types of analytes, including microenvironments, small biomolecules, or metal ions; 3) the challenges and perspectives of PA probes in PAD.