Efficient Aggregation-Induced Emission Manipulated by Polymer Host Materials

Multi-step FRET systems based on discrete supramolecular assemblies

Fluorescence resonance energy transfer (FRET) from the excited state of the donor to the ground state of the acceptor is one of the most important fluorescence mechanisms and has wide applications in light-harvesting systems, light-mediated therapy, bioimaging, optoelectronic devices, and information security fields. The phenomenon of sequential energy transfer in natural photosynthetic systems provides great inspiration for scientists to make full use of light energy. In recent years, discrete supramolecular assemblies (DSAs) have been successively constructed to incorporate donor and multiple acceptors, and to achieve multi-step FRET between them. This perspective describes recent advances in the fabrication and application of DSAs with multi-step FRET. These DSAs are categorized based on the non-covalent scaffolds, such as amphiphilic nanoparticles, host-guest assemblies, metal-coordination scaffolds, and biomolecular scaffolds. This perspective will also outline opportunities and future challenges in this research area.

Supramolecular Assembly Based on Calix(4)arene and Aggregation-Induced Emission Photosensitizer for Phototherapy of Drug-Resistant Bacteria and Skin Flap Transplantation

Photodynamic therapy as a burgeoning and non-invasive theranostic technique has drawn great attention in the field of antibacterial treatment but often encounters undesired phototoxicity of photosensitizers during systemic circulation. Herein, a supramolecular substitution strategy is proposed for phototherapy of drug-resistant bacteria and skin flap repair by using macrocyclic p-sulfonatocalix(4)arene (SC4A) as a host, and two cationic aggregation-induced emission luminogens (AIEgens), namely TPE-QAS and TPE-2QAS, bearing quaternary ammonium group(s) as guests. Through host-guest assembly, the obtained complex exhibits obvious blue fluorescence in the solution due to the restriction of free motion of AIEgens and drastically inhibits efficient type I ROS generation. Then, upon the addition of another guest 4,4'-benzidine dihydrochloride, TPE-QAS can be competitively replaced from the cavity of SC4A to restore its pristine ROS efficiency and photoactivity in aqueous solution. The dissociative TPE-QAS shows a high bacterial binding ability with an efficient treatment for methicillin-resistant Staphylococcus aureus (MRSA) in dark and light irradiation. Meanwhile, it also exhibits an improved survival rate for MRSA-infected skin flap transplantation and largely accelerates the healing process. Thus, such cascaded host-guest assembly is an ideal platform for phototheranostics research.

Pillararene-Based Supramolecular Polymers for Adsorption and Separation

Supramolecular polymers have attracted increasing attention in recent years due to their perfect combination of supramolecular chemistry and traditional polymer chemistry. The design and synthesis of macrocycles have driven the rapid development of supramolecular chemistry and polymer science. Pillar[n]arenes, a new generation of macrocyclic compounds possessing unique pillar-shaped structures, nano-sized cavities, multi-functionalized groups, and excellent host-guest complexation abilities, are promising candidates to construct supramolecular polymer materials with enhanced properties and functionalities. This review summarizes recent progress in the design and synthesis of pillararene-based supramolecular polymers (PSPs) and illustrates their diverse applications as adsorption and separation materials. All performances are evaluated and analyzed in terms of efficiency, selectivity, and recyclability. Typically, PSPs can be categorized into three typical types according to their topologies, including linear, cross-linked, and hybrid structures. The advances made in the area of functional supramolecular polymeric adsorbents formed by new pillararene derivatives are also described in detail. Finally, the remaining challenges and future perspectives of PSPs for separation-based materials science are discussed. This review will inspire researchers in different fields and stimulate creative designs of supramolecular polymeric materials based on pillararenes and other macrocycles for effective adsorption and separation of a variety of targets.

Aggregation-Induced Emission via the Restriction of the Intramolecular Vibration Mechanism of Pinacol Lanthanide Complexes

Pinacol lanthanide complexes PyraLn (Ln = Dy and Tb) with the restriction of intramolecular vibration were obtained for the first time via an in situ solvothermal coordination-catalyzed tandem reaction using cheap and simple starting materials, thereby avoiding complex, time-consuming, and expensive conventional organic synthesis strategies. A high-resolution electrospray ionization mass spectrometry (HRESI-MS) analysis confirmed the stability of PyraLn in an organic solution. The formation process of PyraLn was monitored in detail using time-dependent HRESI-MS, which allowed for proposing a mechanism for the formation of pinacol complexes via in situ tandem reactions under one-pot coordination-catalyzed conditions. The PyraLn complexes constructed using a pinacol ligand with a butterfly configuration exhibited distinct aggregation-induced emission (AIE) behavior, with the αAIE value as high as 60.42 according to the AIE titration curve. In addition, the PyraLn complexes in the aggregated state exhibit a rapid photoresponse to various 3d metal ions with low detection limits. These findings provide fast, facile, and high-yield access to dynamic, smart lanthanide complex emissions with bright emission and facilitate the rational construction of molecular machines for artificial intelligence.

Construction of an efficient artificial light-harvesting system based on hyperbranched polyethyleneimine and improvement of photocatalytic performance

An artificial light-harvesting system (ALHS) was developed in aqueous solution by employing the electrostatic co-assembly of a tetraphenylethylene derivative modified with two sulfonate groups (TPE-BSBO) and hyperbranched polyethyleneimine (PEI) as the energy donors, and 4,7-bis(2-thienyl)-2,1,3-benzothiadiazole (DBT) as the energy acceptors. The ALHS exhibits not only high efficiency in energy transfer and conversion but also a significant enhancement in the generation of reactive oxygen species (ROS), especially superoxide anion radicals (O2˙-), facilitating its utilization in photocatalytic oxidation reactions.

Photo-Controlled Nano-Supramolecular Size and Reversible Luminescent Behaviors Based on Cucurbit[7]uril Cascaded Assembly

Supramolecular luminescent material with switchable behavior and photo-induced aggregation with emission enhancement is a current research hot spot. Herein, a size-tunable nano-supramolecular assembly with reversible photoluminescent behavior was constructed by noncovalent polymerization of diarylethene-bridged bis(coumarin) derivative (DAE-CO), cucurbit[7]uril (CB[7]), and β-cyclodextrin-grafted hyaluronic acid (HACD). Benefiting from the macrocyclic confinement effect, the guest molecule DAE-CO was included into the cavity of CB[7] to give enhanced fluorescence emission of the resulting DAE-CO⊂CB[7]2 with longer lifetime at 432 nm to 1.43 ns, thereby further enhancing fluorescence output and lifetime (1.46 ns) when further assembled with HACD, compared with the free DAE-CO (0.95 ns). In addition, DAE-CO, DAE-CO⊂CB[7]2, and DAE-CO⊂CB[7]2&HACD all possessed characteristics of aggregation-induced emission and reversible photo-switched structural interconversion, exhibiting an obvious photophysical activation phenomenon of self-aggregation into larger nanoparticles with increase in fluorescence emission intensity, lifetime, and size after irradiation, which could be increased step by step with the alternating irradiation of 254 nm (5 min) or >600 nm (30 s) repeated 7 times. These supramolecular assemblies were successfully used in the tumor cells' targeted imaging and anti-counterfeiting because of the capability of HACD for recognizing specific receptors overexpressed on the surface of tumor cells and the excellent photo-regulated switch ability of DAE-CO, providing an approach of constructing photo-induced emission-enhanced luminescent materials.

Smart organic materials based on macrocycle hosts

Innovative design of smart organic materials is of great importance for the advancement of modern technology. Macrocycle hosts, possessing cyclic skeletons, intrinsic cavities, and specific guest binding properties, have demonstrated pronounced potential for the elaborate fabrication of a variety of functional organic materials with smart stimuli-responsive characteristics. In this tutorial review, we outline the current development of smart organic materials based on macrocycle hosts as key building blocks, focusing on the design principles and functional mechanisms of the tailored systems. Three main types of macrocycle-based smart organic materials are exemplified as follows according to the distinct forms of construction patterns: (1) supramolecular polymeric materials and nanoassemblies; (2) adaptive molecular crystals; (3) smart porous organic materials. The responsive performances of macrocycle-containing smart materials in versatile aspects, including mechanically adaptive polymers, soft optoelectronic devices, data encryption, drug delivery systems, artificial transmembrane channels, crystalline-state gas adsorption/separation, and fluorescence sensing, are illustrated by discussing the representative studies as paradigms, where the roles of macrocycles in these systems are highlighted. We also provide in the conclusion part the perspectives and remaining challenges in this burgeoning field.

Host-Guest Complexes of Pillar[5]arene as Components for Supramolecular Light-Harvesting Systems with Tunable Fluorescence

A guest molecule containing a short alkyl spacer between the tetraphenylethylene group and the methylpyridinium group was designed and synthesized. After complexation with a water-soluble pillar[5]arene, the resulting host-guest complex can further self-assemble into fluorescence-emitting nanoparticles in water. By loading a commercially available dye Rhodamine 6G into the nanoparticles, an efficient artificial light-harvesting system with high donor/acceptor ratios (>400/1) was successfully constructed. The obtained systems show considerable antenna effects with values of more than 10 times. The system also exhibits tunable fluorescence emission behavior and can be used as a fluorescent ink for information encryption.

Impact of polymer chain packing and crystallization on the emission behavior of curcumin-embedded poly(L-lactide)s

The development of biodegradable and biocompatible fluorescent materials with tunable emission in the solid state has become increasingly relevant for smart packaging and biomedical applications. Molecular packing and conformations play a critical role in tuning the solid-state photophysical properties of fluorescent materials. In this work, tunable emission of bioactive curcumin was achieved through the manipulation of the crystallization conditions and the polymorphic form of covalently linked poly(L-lactide) in the curcumin-embedded poly(L-lactide) (curcumin-PLLA). In the melt-crystallized curcumin-PLLA, with the increase in the isothermal crystallization temperature, a bathochromic shift in the fluorescence of curcumin-PLLA was observed due to the change in the intramolecular conjugation length of curcumin. The change in the isothermal crystallization temperature of curcumin-PLLA resulted in the rotation of the terminal phenyl rings of curcumin with respect to the central keto-enol group due to the covalently linked helical PLLA chains. In addition, solvent-induced single crystals and a gel of curcumin-PLLA were prepared and the influence of the polymorphic form of PLLA on the emission behavior of curcumin-PLLA was investigated. The results suggest that the polymer chain packing, crystallization conditions, morphology, and polymorphic form could play an influential role in dictating the fluorescence properties of fluorophore-embedded polymers.

Water-soluble phosphate-pillar[5]arene (WPP5)-based artificial light-harvesting system for photocatalytic cross-coupling dehydrogenation

A novel water-soluble phosphate-pillar[5]arene (WPP5)-based artificial light-harvesting system (LHS) was successfully fabricated through the supramolecular assembly of phenyl-pyridyl-acrylonitrile derivative (PBT), WPP5, and organic pigment Eosin Y (ESY). Initially, after host-guest interaction, WPP5 could bind well with PBT and form WPP5 ⊃ PBT complexes in water, which further assembled into WPP5 ⊃ PBT nanoparticles. WPP5 ⊃ PBT nanoparticles performed an outstanding aggregation-induced emission (AIE) capability because of the J-aggregates of PBT in WPP5 ⊃ PBT nanoparticles, which were appropriate as fluorescence resonance energy transfer (FRET) donors for artificial light-harvesting. Moreover, due to the emission region of WPP5 ⊃ PBT overlapped well with the UV-Vis absorption of ESY, the energy of WPP5 ⊃ PBT (donor) could be significantly transferred to ESY (acceptor) via FRET process in WPP5 ⊃ PBT-ESY nanoparticles. Notably, the antenna effect (AE_{WPP5⊃PBT-ESY}) of WPP5 ⊃ PBT-ESY LHS was determined to be 30.3, which was much higher than that of recent artificial LHSs for photocatalytic cross-coupling dehydrogenation (CCD) reactions, suggesting a potential application in photocatalytic reaction. Furthermore, through the energy transfer from PBT to ESY, the absolute fluorescence quantum yields performed a remarkable increase from 14.4% (for WPP5 ⊃ PBT) to 35.7% (for WPP5 ⊃ PBT-ESY), further confirming their FRET processes in WPP5 ⊃ PBT-ESY LHS. Subsequently, in order to output the harvested energy for catalytic reactions, WPP5 ⊃ PBT-ESY LHSs were used as photosensitizers to catalyze the CCD reaction of benzothiazole and diphenylphosphine oxide. Compared to free ESY group (21%), a significant cross-coupling yield of 75% in WPP5 ⊃ PBT-ESY LHS was observed, because more UV region energy of PBT was transferred to ESY for CCD reaction, which suggested more potential in improving the catalytic activity of organic pigment photosensitizers in aqueous systems.

Efficient detection of L-aspartic acid and L-glutamic acid by self-assembled fluorescent microparticles with AIE and FRET activities

Amino acids play an important role in the formation of proteins, enzymes, hormones and peptides in animals. Moreover, aspartic acid and glutamic acid have a critical impact on the central nervous system as excitatory neurotransmitters. Here, we report the highly selective detection of L-glutamic acid (L-Glu) and L-aspartic acid (L-Asp) using fluorescent microparticles constructed by the combination of aggregation-induced emission and self-assembly-induced Förster resonance energy transfer.

Self-assembled supramolecular artificial light-harvesting nanosystems: construction, modulation, and applications

Artificial light-harvesting systems, an elegant way to capture, transfer and utilize solar energy, have attracted great attention in recent years. As the primary step of natural photosynthesis, the principle of light-harvesting systems has been intensively investigated, which is further employed for artificial construction of such systems. Supramolecular self-assembly is one of the feasible methods for building artificial light-harvesting systems, which also offers an advantageous pathway for improving light-harvesting efficiency. Many artificial light-harvesting systems based on supramolecular self-assembly have been successfully constructed at the nanoscale with extremely high donor/acceptor ratios, energy transfer efficiency and the antenna effect, which manifests that self-assembled supramolecular nanosystems are indeed a viable way for constructing efficient light-harvesting systems. Non-covalent interactions of supramolecular self-assembly provide diverse approaches to improve the efficiency of artificial light-harvesting systems. In this review, we summarize the recent advances in artificial light-harvesting systems based on self-assembled supramolecular nanosystems. The construction, modulation, and applications of self-assembled supramolecular light-harvesting systems are presented, and the corresponding mechanisms, research prospects and challenges are also briefly highlighted and discussed.

Construction of artificial light-harvesting systems based on a variety of polyelectrolyte materials and application in photocatalysis

In the present work, we designed and synthesized a cationic cyano-substituted p-phenylenevinylene derivative (PPTA), which can form supramolecular assemblies through electrostatic interaction with a type of polyelectrolyte material anionic guar gum (GP5A). A polyelectrolyte-based artificial light-harvesting system (LHS) was constructed by selecting a fluorescent dye sulforhodamine 101 (SR101) that matched its energy level as an energy acceptor. The energy harvested by the acceptors was used in the aqueous phase cross dehydrogenation coupling (CDC) reaction with a yield of up to 87%. In addition, the general applicability of polyelectrolyte materials to build artificial LHS was demonstrated by three other polyelectrolyte materials sodium polyphenylene sulfonate (RSS), sodium carboxymethyl cellulose (CMC), and sodium polyacrylate (PAAS), in which the CDC reaction was also carried out by these three LHSs and obtained high yields. This work not only provides a new method to construct LHSs by using polyelectrolyte materials, but also provides a beneficial exploration for further applying the energy harvested in LHSs to the field of photocatalysis in an aqueous solution.

Fluorescent Nanoassemblies in Water Exhibiting Tunable LCST Behavior and Responsive Light Harvesting Ability

Responsive fluorescent nanomaterials have been received considerable attention in recent years. In this work, a bola-type amphiphilic molecule, CSO, was synthesized which contains a hydrophobic cyanostilbene core and hydrophilic oligo(ethylene glycol) (OEG) coils at both sides. The cyanostilbene group is aggregation-induced emission (AIE) active, while the OEG coils are thermo-responsive. As a result, the CSO molecules can self-assemble into blue-fluorescent nanoassemblies with lower critical solution temperature (LCST) behavior in aqueous media. It is noteworthy that the LCST behavior can be reversibly regulated with changes in concentration and the introduction of K⁺ . Intriguingly, fluorescence of CSO assembly shows a blue-shift upon heating. Finally, by employing CSO as a light capturing antenna and energy donor, an artificial light harvesting system with tunable emission and thermo-responsive characteristics was fabricated. This study not only demonstrates an integrated approach to create responsive fluorescent nanomaterials, but also shows great potential for producing luminescent materials and mimicking photosynthesis in nature.

Covalently bridged pillararene-based polymers: structures, synthesis, and applications

Covalently bridged pillararene-based polymers (CBPPs) are a special class of macrocycle-based polymers in which multiple pillararene monomers are attached to the polymer structures by covalent bonds. Owing to the unique molecular structures including the connection components or the spatial structures, CBPPs have become increasingly popular in applications ranging from environmental science to biomedical science. In this review, CBPPs are divided into three types (linear polymers, grafted polymers, and cross-linked polymers) according to their structural characteristics and described from the perspective of synthesis methods comprehensively. In addition, the applications of CBPPs are presented, including selective adsorption and separation, fluorescence sensing and detection, construction of supramolecular gels, anticancer drug delivery, artificial light-harvesting, catalysis, and others. Finally, the current challenging issues and comprehensive prospects of CBPPs are discussed.

Multistep sequence-controlled supramolecular polymerization by the combination of multiple self-assembly motifs

The precise sequence control of polymer chain is an important research topic of polymer chemistry. Although some methods such as iterative synthesis and supramolecular polymerization have been developed to fabricate sequence-controllable polymer, it is still a great challenge to consecutively prepare multiple supramolecular polymers with different sequence structures. In this work, through the reasonable utilization of assembly motifs, we integrated multiple host-guest recognitions and metal coordination interactions to prepare different sequence-controlled supramolecular polymers by a multistep assembly strategy. This research provides inspiration for the design and preparation of supramolecular polymers with different sequence structures.

Artificial supramolecular light-harvesting systems based on a pyrene derivative for photochemical catalysis

A supramolecular polymer based on NPyP and CB[8] was constructed via host–guest interactions with the AIE effect for artificial light-harvesting energy transfer and photocatalysis.

Green Synthesis of Near-Infrared Plasmonic Gold Nanostructures by Pomegranate Extract and Their Supramolecular Assembling with Chemo- and Photo-Therapeutics

Au nanostructures exhibiting a localized surface plasmon resonance in the near-infrared spectral window are obtained in a single, green step at room temperature by pomegranate extract in the presence of a highly biocompatible β-cyclodextrin branched polymer, without the need of preformed seeds, external reducing and sacrificial agents, and conventional surfactants. The polymeric component makes the Au nanostructures dispersible in water, stable for weeks and permits their supramolecular assembling with the chemotherapeutic sorafenib and a nitric oxide (NO) photodonor (NOPD), chosen as representative for chemo- and photo-therapeutics. Irradiation of the plasmonic Au nanostructures in the therapeutic window with 808 nm laser light results in a good photothermal response, which (i) is not affected by the presence of either the chemo- or the phototherapeutic guests and (ii) does not lead to their photoinduced decomposition. Besides, irradiation of the hybrid Au nanoassembly with the highly biocompatible green light results in the NO release from the NOPD with efficiency similar to that observed for the free guest. Preliminary biological experiments against Hep-G2 hepatocarcinoma cell lines are also reported.

Non-Covalent Dimer as Donor Chromophore for Constructing Artificial Light-Harvesting System in Water

Dynamic emissive materials in aqueous media have received much attention owing to their ease of preparation, tunable luminescence and environmental friendliness. However, hydrophobic fluorophores usually suffer from aggregation-caused quenching in water. In this work, we constructed an artificial light-harvesting system by using a non-covalent aggregation-induced emission dimer as antenna and energy donor. The dimer is quadruple hydrogen bonded from a ureidopyrimidinone derivative (M) containing a tetraphenylethylene group. The dispersed nano-assemblies based on the dimer in aqueous media were fabricated with the help of surfactant. By loading a hydrophobic acceptor molecule DBT into the nano-assemblies, man-made light-harvesting nanoparticles were fabricated, showing considerable energy transfer efficiency and a relatively high antenna effect. Additionally, the fluorescence color of the system can be gradually tuned by varying the content of the acceptors. This study provides a general way for the construction of an aqueous light-harvesting system based on a supramolecular dimer, which is important for potential application in luminescent materials.

Noncovalent Polymerization-Activated Ultrastrong Near-Infrared Room-Temperature Phosphorescence Energy Transfer Assembly in Aqueous Solution

Noncovalent macrocycle-confined supramolecular purely organic room-temperature phosphorescence (RTP) is a current research hotspot. Herein, a high-efficiency noncovalent polymerization-activated near-infrared (NIR)-emissive RTP-harvesting system in aqueous solution based on the stepwise confinement of cucurbit[7]uril (CB[7]) and β-cyclodextrin-grafted hyaluronic acid (HACD), is reported. Compared with the dodecyl-chain-bridged 6-bromoisoquinoline derivative (G), the dumbbell-shaped assembly G⊂CB[7] presents an appeared complexation-induced RTP signal at 540 nm via the first confinement of CB[7]. Subsequently, benefitting from the stepwise confinement encapsulation of the β-cyclodextrin cavity, the subsequent noncovalent polymerization of the binary G⊂CB[7] assembly enabled by HACD can contribute to the further-enhanced RTP emission intensity approximately eight times in addition to an increased lifetime from 59.0 µs to 0.581 ms. Moreover, upon doping a small amount of two types of organic dyes, Nile blue or tetrakis(4-sulfophenyl)porphyrin as an acceptor into the supramolecular confinement assembly G⊂CB[7] @ HACD, efficient RTP energy transfer occurs accompanied by a long-lived NIR-emitting performance (680 and 710 nm) with a high donor/acceptor ratio. Intriguingly, the prepared RTP-harvesting system is successfully applied for targeted NIR imaging of living tumor cells by utilizing the targeting ability of hyaluronic acid, which provides a new strategy to create advanced water-soluble NIR phosphorescent materials.

Folic Acid-Modified Cyclodextrin Multivalent Supramolecular Assembly for Photodynamic Therapy

The construction of supramolecular multivalent assemblies with unique photoluminescence behaviors and biological functions has become a research hot spot recently in the biomaterial field. Herein, we report an adaptive supramolecular assembly via a multivalent co-assembly strategy prepared in two stages by using an adamantane-connected pyrenyl pyridinium derivative (APA2), sulfonated aluminum phthalocyanine (PcS), and folic acid-modified β-cyclodextrin (FA-CD) for efficient dual-organelle targeted photodynamic cancer cell ablation. Benefiting from π-π and electrostatic interactions, APA2 and PcS could first assemble into non-fluorescent irregular nanoaggregates because of the heterodimer aggregation-induced quenching and then secondarily assemble with FA-CD to afford targeted spherical nanoparticles (NPs) with an average diameter of around 50 nm, which could be specifically taken up by HeLa cancer cells through endocytosis in comparison with 293T normal cells. Intriguingly, such multivalent NPs could adaptively disaggregate in an intracellular physiological environment of cancer cells and further respectively and selectively accumulate in mitochondria and lysosomes, which not only displayed near-infrared two-organelle localization in situ but also aroused efficient singlet oxygen generation under light irradiation to effectively eliminate cancer cells up to 99%. This supramolecular multivalent assembly with an adaptive feature in a specific cancer cell environment provides a feasible strategy for precise organelle-targeted imaging and an efficiently synergetic photodynamic effect in situ for cancer cell ablation.

Förster Resonance Energy Transfer in Luminescent Solar Concentrators

Luminescent solar concentrators (LSCs) are an emerging technology to collect and channel light from a large absorption area into a smaller one. They are a complementary technology for traditional solar photovoltaics (PV), particularly suitable for application in urban or indoor environments where their custom colors and form factors, and performance under diffuse light conditions may be advantageous. Förster resonance energy transfer (FRET) has emerged as a valuable approach to overcome some of the intrinsic limitations of conventional single lumophore LSCs, such as reabsorption or reduced quantum efficiency. This review outlines the potential of FRET to boost LSC performance, using highlights from the literature to illustrate the key criteria that must be considered when designing an FRET-LSC, including both the photophysical requirements of the FRET lumophores and their interaction with the host material. Based on these criteria, a list of design guidelines intended to aid researchers when they approach the design of a new FRET-LSC system is presented. By highlighting the unanswered questions in this field, the authors aim to demonstrate the potential of FRET-LSCs for both conventional solar-harvesting and emerging LSC-inspired technologies and hope to encourage participation from a diverse researcher base to address this exciting challenge.

"On/Off" Switchable Sequential Light-Harvesting Systems Based on Controllable Protein Nanosheets for Regulation of Photocatalysis

A controllable protein nanostructures-based "On/Off" switchable artificial light-harvesting system (LHS) with sequential multistep energy transfer and photocatalysis was reported herein for mimicking the natural LHS in both structure and function. Single-layered protein nanosheets were first constructed via a reversible covalent self-assembly strategy using cricoid stable protein one (SP1) as building blocks to realize an ordered arrangement of pigments. Fluorescent chromophores like carbon dots (CDs) can be precisely distributed on the protein nanosheets superficially via electrostatic interactions and make the ratio between donors and acceptors adjustable. After being anchored with a photocatalysis center (eosin-5-isothiocyanate, EY), the constructed LHS could sequentially transfer energy between two kinds of chromophores (CD1 and CD2), and further transfer to EY center with a high efficiency of 84%. Interestingly, the Förster resonance energy transfer (FRET) process of our LHS could be reversibly "On/Off" switched by the redox regulated assembly and disassembly of SP1 building blocks. Moreover, the LHS has been further proved to promote the yield of a model cross-coupling hydrogen evolution reaction and regulate the process of the reaction with the FRET process "On/Off" state.

A Fluorescent Linear Conjugated Polymer Constructed from Pillararene and Anthracene

Over the past few years, conjugated polymers (CPs) have aroused much attention owing to their rigid conjugated structures, which can perform well in light harvesting and energy transfer and offer great potential in materials chemistry. In this article, we fabricate a new luminescent linear CP p(P[5](OTf)₂-co-9,10-dea) via the Sonogashira coupling of 9,10-diethynylanthracene and trifluoromethanesulfonic anhydride (OTf) modified pillar[5]arene, generating enhanced yellow-green fluorescence emission at around 552 nm. The reaction condition was screened to get a deeper understanding of this polymerization approach, resulting in an excellent yield as high as 92% ultimately. Besides the optical properties, self-assembly behaviors of the CP in low/high concentrations were studied, where interesting adjustable morphologies from tube to sheet were observed. In addition, the fluorescence performance and structural architecture can be disturbed by the host–guest reorganization between the host CP and the guest adiponitrile, suggesting great potential of this CP material in the field of sensing and detection.

Tetraphenylethylene-embedded pillar[5]arene-based orthogonal self-assembly for efficient photocatalysis in water

Herein, we have designed and fabricated a simple and efficient supramolecular self-assembled nanosystem based on host–guest interactions between water-soluble tetraphenylethylene-embedded pillar[5]arene (m-TPEWP5) and ammonium benzoyl-ʟ-alaninate (G) in an aqueous medium. The obtained assembly of m-TPEWP5 and G showed aggregation-induced emission (AIE) via the blocking of intramolecular phenyl-ring rotations and functioned as an ideal donor. After the loading of eosin Y (EsY) as acceptor on the surface of the assembly of m-TPEWP5 and G, the worm-like nanostructures changed into nanorods, which facilitates a Förster resonance energy transfer (FRET) from the m-TPEWP5 and G assembled donor to the EsY acceptor present in the nanorod assembly. The system comprising m-TPEWP5, G and EsY displayed moderate FRET efficiency (31%) at a 2:1 molar ratio of donor-to-acceptor. Moreover, the obtained supramolecular nanorod assembly could act as a nanoreactor mimicking natural photosynthesis and exhibited a high catalytic efficiency for the photocatalytic dehalogenation reaction of various bromoketone derivatives with good yields in short reaction time in water.

Aggregation-Induced Emission Boosting the Study of Polymer Science

The past one hundred years witness the great development of polymer science. The advancement of polymer science is closely related with the developing of characterization techniques and methods, from viscometry in molecular weight determination to advanced techniques including differential scanning calorimetry, nuclear magnetic resonance and scanning electron microscopy. However, these techniques are normally constrained to tedious sample preparation, high cost, harsh experimental condition, or ex-situ characterization. Fluorescence technology has the merits of high sensitivity and direct visualization. Contrary to conventional aggregation-causing quenching fluorophores, those dyes with aggregation-induced emission characteristic show high emission efficiency in aggregate states. Based on the restriction of intramolecular motions for AIE properties, the AIE materials are very sensitive to the surrounding microenvironments owing to the twisted propeller-like structures and therefore reveal great potentials in polymer's study. The AIE concept has been successfully used in polymer's study and provides us a deeper understanding on polymer structure and properties. In this review, the applications of AIEgens in polymer science for visualizing polymerization, glass transition, dissolution, crystallization, gelation, self-assembly, phase separation, cracking and self-healing were exemplified and summarized. Lastly, the challenges and perspectives in the study of polymer science using AIEgens are addressed. This article is protected by copyright. All rights reserved.

Assembly and Applications of Macrocyclic-Confinement-Derived Supramolecular Organic Luminescent Emissions from Cucurbiturils

Cucurbit[n]urils (Q[n]s or CB[n]s), as a classical of artificial organic macrocyclic hosts, were found to have excellent advantages in the fabricating of tunable and smart organic luminescent materials in aqueous media and the solid state with high emitting efficiency under the rigid pumpkin-shaped structure-derived macrocyclic-confinement effect in recent years. This review aims to give a systematically up-to-date overview of the Q[n]-based supramolecular organic luminescent emissions from the confined spaces triggered host-guest complexes, including the assembly fashions and the mechanisms of the macrocycle-based luminescent complexes, as well as their applications. Finally, challenges and outlook are provided. Since this class of Q[n]-based supramolecular organic luminescent emissions, which have essentially derived from the cavity-dependent confinement effect and the resulting assembly fashions, emerged only a few years ago, we hope this review will provide valuable information for the further development of macrocycle-based light-emitting materials and other related research fields.

Activatable Nanoprobe with Aggregation-Induced Dual Fluorescence and Photoacoustic Signal Enhancement for Tumor Precision Imaging and Radiotherapy

Owing to the high sensitivity and high spatial resolution, fluorescence (FL) imaging has been widely applied for visualizing biological processes. To gain insight into molecular events on deeper tissues, photoacoustic (PA) imaging with better deep-tissue imaging capability can be incorporated to provide complementary visualization and quantitative information on the pathological status. However, the development of activatable imaging probes to achieve both FL and PA signal amplification remains challenging because the enhancement of light absorption in PA imaging often caused the quenching of FL signal. Herein, we first developed a caspase-3 enzyme activatable nanoprobe of a nanogapped gold nanoparticle coated with AIE molecule INT20 and DEVD peptides (AuNNP@DEVD-INT20) for tumor FL and PA imaging and subsequent imaging-guided radiotherapy. The nanoprobe could interact with GSH and caspase-3 enzyme to liberate INT20 molecules, leading to AIE. Simultaneously, the in situ self-assembly of AuNPs was achieved through the cross-linking reaction between the sulfhydryl and the maleimide, resulting in ratiometric PA imaging in tumor. Remarkably, the nanoprobe can generate richful ROS for cancer radiotherapy under X-ray irradiation. The platform not only achieves the aggregation-induced FL and PA signal enhancement but also provides a general strategy for imaging of various biomarkers, eventually benefiting precise cancer therapy.

Highly compressible glass-like supramolecular polymer networks

Supramolecular polymer networks are non-covalently crosslinked soft materials that exhibit unique mechanical features such as self-healing, high toughness and stretchability. Previous studies have focused on optimizing such properties using fast-dissociative crosslinks (that is, for an aqueous system, dissociation rate constant k_d > 10 s^-1). Herein, we describe non-covalent crosslinkers with slow, tuneable dissociation kinetics (k_d < 1 s^-1) that enable high compressibility to supramolecular polymer networks. The resultant glass-like supramolecular networks have compressive strengths up to 100 MPa with no fracture, even when compressed at 93% strain over 12 cycles of compression and relaxation. Notably, these networks show a fast, room-temperature self-recovery (< 120 s), which may be useful for the design of high-performance soft materials. Retarding the dissociation kinetics of non-covalent crosslinks through structural control enables access of such glass-like supramolecular materials, holding substantial promise in applications including soft robotics, tissue engineering and wearable bioelectronics.

Poly(l-lactide)s with tetraphenylethylene: role of polymer chain packing in aggregation-induced emission behavior of tetraphenylethylene

The AIE behavior of tetraphenylethylene in biocompatible poly(l-lactide)s is found to be sensitive to the polymer chain packing, polymer crystal structure, solvent, and temperature.

Pillararene-containing polymers with tunable fluorescence properties based on host-guest interactions

Linear polymers containing pillar[5]arenes as the pendant groups were designed and synthesized via a ring-opening metathesis polymerization. Such polymers could form supramolecular brush polymers and exhibited tunable fluorescence properties based on the host-guest interactions.

Core-Shell Fluorescent Polymeric Particles with Tunable White Light Emission Based on Aggregation Microenvironment Manipulation

White-light emitting polymers (WLEPs) based on aggregation microenvironment-sensitive aggregation-induced emission (AIE) and Förster resonance energy transfer (FRET) have aroused great interest in lighting and optoelectronic devices. Herein, we developed a novel strategy to construct WLEP particles via a stepwise self-stabilized precipitation polymerization of two emission-complementary AIEgens under core-shell engineering, where the AIE characteristics and FRET process of core-shell fluorescent polymeric particles (CS-FPPs) could be modulated by altering aggregation microenvironment under swelling and shrinking of polymers, facilitating the tunable white light emission of CS-FPPs. Furthermore, such tuning could be fast realized in the solid state, thus demonstrating the potential in anti-counterfeiting. This work proved the significance of aggregation microenvironment on emission of luminogens, guiding the development of high-efficiency emission-tunable materials.

The construction of an artificial light-harvesting system with two-step sequential energy transfer based on supramolecular polymers

An artificial light-harvesting system with two-step sequential energy transfer was constructed in aqueous media based on cyano-substituted p-phenylenevinylene derivative (PPTA) and bis-(p-sulfonatocalix[4]arenes) (BSC4) supramolecular polymers formed through host-guest interactions, in which two different fluorescent dyes, eosin Y (EY) and sulforhodamine (SR101), were employed as energy acceptors. The obtained artificial light-harvesting system can achieve an efficient two-step energy transfer process from PPTA-BSC4 to EY and then to SR101 with high energy-transfer efficiencies of up to 36.6% and 40.8%, respectively. More importantly, the harvested energy from the PPTA-BSC4 + EY + SR101 system can be used to promote the dehalogenation of α-bromoacetophenone with a yield of 89% in aqueous solution.

Aggregation-induced emission from silole-based lumophores embedded in organic-inorganic hybrid hosts

Aggregation-induced emitters - or AIEgens - are often symbolised by their photoluminescence enhancement as a result of aggregation in a poor solvent. However, for some applications, it is preferable for the AIE response to be induced in the solid-state. Here, the ability of an organic-inorganic hybrid polymer host to induce the AIE response from embedded silole-based lumophores has been explored. We have focussed on understanding how the incorporation method controls the extent of lumophore aggregation and thus the associated photophysical properties. To achieve this, two sample concentration series have been prepared, based on either the parent AIEgen 1,1-dimethyl-2,3,4,5-tetraphenylsilole (DMTPS) or the silylated analogue (DMTPS-Sil), which were physically doped or covalently grafted, respectively, to dU(600) - a member of the ureasil family of poly(oxyalkylene)/siloxane hybrids. Steady-state and time-resolved photoluminescence measurements, coupled with confocal microscopy studies, revealed that covalent grafting leads to improved dispersibility of the AIEgen, reduced scattering losses, increased photoluminescence quantum yields (up to ca. 40%) and improved chemical stability. Moreover, the ureasil also functions as a photoactive host that undergoes excitation energy transfer to the embedded DMTPS-Sil with an efficiency of almost 70%. This study highlights the potential for designing complex photoluminescent hybrid polymers exhibiting an ehanced AIE response for solid-state optical applications.

Supramolecular Assembly with Aggregation-Induced Emission Property for Sensing and Detection

The fabrication of new supramolecular materials for real-time detection of analytes including ions, organic pollutants, gases, biomolecules, and drugs is of pivotal importance in industrial manufacture, clinical treatment, and environmental remediation. Incorporating fluorescent molecules with distinct aggregation-induced emission (AIE) effects into supramolecular assemblies has received much attention over the past two decades, owing to the remarkable performance of the AIE-active supramolecular materials in sensing and detection. In this minireview, we summarize the recent progress of superior detection systems on the basis of supramolecular assemblies accompanied with AIE features. We envision that this minireview will be helpful and timely for relevant researchers to stimulate new thinking for constructing new AIE-based supramolecular materials with advanced architectures for effective sensing and detection.

Quantitative Förster Resonance Energy Transfer: Efficient Light Harvesting for Sequential Photo-Thermo-Electric Conversion

Light is essential to all life on the earth. Thus, highly efficient light-harvesting systems with the sequential energy transfer process are significant for using solar energy in photosynthesis. For developing an efficient light-harvesting system, a liquid aggregation-induced emission (AIE) dye TPE-EA is obtained, as a donor and solvent, which can light up the aggregation caused quenching (ACQ) Nile Red (NiR, acceptor) to construct a quantitative Förster resonance energy transfer (FRET) system in NiR⊂TPE-EA. Impressively, this FRET pair shows an impressive photothermal effect, producing a peak temperature of 119 °C while excited by UV light, with 37.8% of conversion efficiency. NiR⊂TPE-EA is quite different from most other photothermal materials, which require excitation with long wavelength light (>520 nm). Therefore, NiR⊂TPE-EA firstly converts the solar into thermal energy and then into electric energy to achieve sequential photo-thermo-electric conversion. Such sequential conversion, suitable for being excited by sunlight, is anticipated to unlock new and smart approaches for capturing solar energy.

Polyacrylamide-Based Binary Luminescent Copolymer Materials Exhibit Color-Tunable and Efficient Long-Lived Room Temperature Phosphorescence

Polymer-based pure organic room temperature phosphorescence (RTP) materials have garnered considerable interest, among which RTP systems with prolonged lifetimes and tunable emission colors are promising for applications in sensing, flexible electronics, bioassay, anti-counterfeiting, and data encryption. Herein, facile doping method is reported based on two types of copolymers with benzene/biphenyl-based light-emitting cores as their side chains, whereby the two copolymers are robustly crosslinked via noncovalent interactions including hydrogen bonding and halogen bonding that occur between the light-emitting cores and polyacrylamide backbones. Persistent RTP emission with prolonged lifetime up to 1.9 s and phosphorescence quantum yield as high as 40.1% are obtained in single copolymers, attributed to the conformation restriction of phosphorescent dyes originating from the rigid microenvironment. Furthermore, multicolor phosphorescence signals are observed in the doped binary luminescent copolymer systems that can be effectively regulated by the feed ratio of luminescent cores and irradiation wavelengths. Possible mechanisms for this efficient and long-lived color-tunable RTP system are discussed on the basis of the experimental data and theoretical calculations. In addition, it is also demonstrated that the color-tunable RTP emission of the doped copolymer systems under ambient conditions allows for further exploitation in the application of dynamic information encryption.

Efficient artificial light-harvesting system constructed from supramolecular polymers with AIE property

Supramolecular luminescent materials in water have attracted much interest due to their excellent tunability, multi-color emission, and environment-friendly behavior. However, hydrophobic chromophores are often affected by poor solubility and aggregation-caused quenching effects in aqueous media. Herein, we report a water-phase artificial light-harvesting system based on an AIE-type supramolecular polymer. Specifically, dispersed nanoparticles in water were prepared from an AIE chromophore-bridged ditopic ureidopyrimidinone (M) based supramolecular polymer with the assistance of surfactants. By co-assembling the hydrophobic chromophores NDI as energy acceptor into the nanocarriers, artificial light-harvesting systems (M-NDI) could be successfully constructed, exhibiting efficient energy transfer and high antenna effects. Furthermore, the spectral emission of the system could be continuously tuned with a relatively small number of acceptors. This work develops an efficient supramolecular light-harvesting system in water, which has potential applications in dynamic luminescent materials.

Chemoresponsive Supramolecular Polypseudorotaxanes with Infinite Switching Capability

Chemoresponsive supramolecular systems with infinite switching capability are important for applications in recycled materials and intelligent devices. To attain this objective, here a chemoresponsive polypseudorotaxane is reported on the basis of a bis(p-phenylene)-34-crown-10 macrocycle (H) and a cyano-substituted viologen guest (G). H and G form a [2]pseudorotaxane (H⊃G) both in solution and in the solid state. Upon addition of AgSF₆ , a polypseudorotaxane (denoted as [H⋅G⋅Ag]_n ) forms as synergistically driven by host-guest complexation and metal-coordination interactions. [H⋅G⋅Ag]_n depolymerizes into a [3]pseudorotaxane (denoted as H₂ ⋅G⋅Ag₂ ⋅acetone₂ ) upon addition of H and AgSF₆ , while it reforms with successive addition of G. The transformations between [H⋅G⋅Ag]_n and H₂ ⋅G⋅Ag₂ ⋅acetone₂ can be switched for infinite cycles, superior to the conventional chemoresponsive supramolecular polymeric systems with limited switching capability.

Promoting the Spreading of Droplets on a Superhydrophobic Surface by Supramolecular Amphiphilic Complex-Based Host-Guest Chemistry

The spreading of pesticide droplets on the surface of superhydrophobic plants is an important process, which can prevent the inadequate retention such as bouncing, splashing, and drifting, thereby improving the efficiency of pesticide utilization and reducing soil and groundwater pollution. Herein, we report an approach to fabricate a supramolecular amphiphilic system that significantly contributes to this issue. The hydrophilic amino-pillar[5]arene was synthesized, which could form vesicles with the hydrophobic long-chain guest. This host-guest complex decreased the surface tension, which greatly promotes the spreading of droplets. This study provides a new strategy for prolonging pesticide retention and reducing pesticide loss.

Recyclable Supramolecular Assembly-Induced Emission System for Selective Detection and Efficient Removal of Mercury(II)

An efficient strategy for simultaneously detecting and removing Hg²⁺ from water is vital to address mercury pollution. Herein a supramolecular assembly G⊂H with photoluminescent properties is facilely constructed through the self-assembly of a functional pillar[5]arene bearing two N,N-dimethyldithiocarbamoyl binding sites (H) and an AIE-active tetraphenylethene derivative (G). Remarkably, the fluorescence of G⊂H can be exclusively quenched by Hg²⁺ among the 30 cations due to the formation of non-luminous ground state complex and only L-cysteine can restore fluorescence in the common 20 amino acids. Meanwhile, the probe G⊂H has a considerable thermal and pH stability, a good anti-interference property from various cations, and a satisfactory sensitivity. More importantly, G⊂H exhibits a prominent capability of Hg²⁺ removal with rapid capture rate (within 1 h) and excellent adsorption efficiency (98 %), as well as a highly efficient recyclability without losing any adsorption activity.