Spin-Orbit Torque Switching in an All-Van der Waals Heterostructure

Spin Transport Modulation of 2D Fe3O4 Nanosheets Driven by Verwey Phase Transition

Realizing spin transport between heavy metal and two-dimensional (2D) magnetic materials at high Curie temperature (TC) is crucial to advanced spintronic information storage technology. Here, environmentally stable 2D nonlayered Fe3O4 nanosheets are successfully synthesized using a reproducible process and found that they exhibit vortex magnetic domains at room temperature. A Verwey phase transition temperature (TV) of ≈110 K is identified for ≈3 nm thick nanosheet through Raman characterization and spin Hall device measurement of the Pt/Fe3O4 bilayer. The anisotropic magnetoresistance ratio decreases near TV, while both the spin Hall magnetoresistance ratio and spin mixing conductance (Gr) increase at TV. As the temperature approaches 112 K, the anomalous Hall effect ratio tends to become zero. The maximum Gr reaches ≈5 × 1015 Ω-1m-2 due to the clean and flat interface between Pt and 2D nanosheet. The observed spin transport behavior in Pt/Fe3O4 spin Hall devices indicates that 2D Fe3O4 nanosheets possess potential for high-power micro spintronic storage devices applications.

Integrated Artificial Neural Network with Trainable Activation Function Enabled by Topological Insulator-Based Spin-Orbit Torque Devices

Nonvolatile memristors offer a salient platform for artificial neural network (ANN), yet the integration of different function and algorithm blocks into one hardware system remains challenging. Here we demonstrate the brain-like synaptic (SOT-S) and neuronal (SOT-N) functions in the Bi2Te3/CrTe2 heterostructure-based spin-orbit torque (SOT) device. The SOT-S unit exhibits highly linear and symmetrical long-term potentiation/depression process, resulting in a fast-training of the MNIST data set with the classification accuracy above 90%. Meanwhile, the Sigmoid-shape transition curve inherited in the SOT-N cell replaces the software-based activation function block, hence reducing the system complexity. On this basis, we employ a serial-connected, voltage-mode sensing ANN architecture to enhance the vector-matrix multiplication signal strength with low reading error of 0.61% while simplifying the peripheral circuitry. Furthermore, the trainable activation function of SOT-N enables the implementation of the Batch Normalization algorithm and activation operation within one clock cycle, which bring about improved on/off-chip training performance close to the ideal baseline.

Field-Free Spin-Orbit Torque Switching in Janus Chromium Dichalcogenides

We predict a very large spin-orbit torque (SOT) capability of magnetic chromium-based transition-metal dichalcogenide (TMD) monolayers in their Janus forms CrXTe, with X = S, Se. The structural inversion symmetry breaking, inherent to Janus structures is responsible for a large SOT response generated by giant Rashba splitting, equivalent to that obtained by applying a transverse electric field of ∼100 V nm-1 in non-Janus CrTe2, completely out of experimental reach. By performing transport simulations on carefully derived Wannier tight-binding models, Janus systems are found to exhibit an SOT performance comparable to the most efficient two-dimensional materials, while additionally allowing for field-free perpendicular magnetization switching, due to their reduced in-plane symmetry. Altogether, our findings evidence that magnetic Janus TMDs stand as suitable candidates for ultimate SOT-MRAM devices in an ultracompact self-induced SOT scheme.

First-Principles Simulation and Materials Screening for Spin-Orbit Torque in 2D van der Waals Heterostructures

Recent advancements in spin-orbit torque (SOT) technology in two-dimensional van der Waals (2D vdW) materials have not only pushed spintronic devices to their atomic limits but have also unveiled unconventional torques and novel spin-switching mechanisms. The vast diversity of SOT observed in numerous 2D vdW materials necessitates a screening strategy to identify optimal materials for torque device performance. However, such a strategy has yet to be established. To address this critical issue, a combination of density functional theory and non-equilibrium Green's function is employed to calculate the SOT in various 2D vdW bilayer heterostructures. This leads to the discovery of three high SOT systems: WTe2/CrSe2, MoTe2/VS2, and NbSe2/CrSe2. Furthermore, a figure of merit that allows for rapid and efficient estimation of SOT is proposed, enabling high-throughput screening of optimal materials and devices for SOT applications in the future.

Multi-Level Switching of Spin-Torque Ferromagnetic Resonance in 2D Magnetite

2D magnetic materials hold substantial promise in information storage and neuromorphic device applications. However, achieving a 2D material with high Curie temperature (TC), environmental stability, and multi-level magnetic states remains a challenge. This is particularly relevant for spintronic devices, which require multi-level resistance states to enhance memory density and fulfil low power consumption and multi-functionality. Here, the synthesis of 2D non-layered triangular and hexagonal magnetite (Fe3O4) nanosheets are proposed with high TC and environmental stability, and demonstrate that the ultrathin triangular nanosheets show broad antiphase boundaries (bAPBs) and sharp antiphase boundaries (sAPBs), which induce multiple spin precession modes and multi-level resistance. Conversely, the hexagonal nanosheets display slip bands with sAPBs associated with pinning effects, resulting in magnetic-field-driven spin texture reversal reminiscent of "0" and "1" switching signals. In support of the micromagnetic simulation, direct explanation is offer to the variation in multi-level resistance under a microwave field, which is ascribed to the multi-spin texture magnetization structure and the randomly distributed APBs within the material. These novel 2D magnetite nanosheets with unique spin textures and spin dynamics provide an exciting platform for constructing real multi-level storage devices catering to emerging information storage and neuromorphic computing requirements.

Field-Free Spin-Orbit Torque Magnetization Switching in a Single-Phase Ferromagnetic and Spin Hall Oxide

Current-induced spin-orbit torque (SOT) offers substantial promise for the development of low-power, nonvolatile magnetic memory. Recently, a single-phase material concurrently exhibiting magnetism and the spin Hall effect has emerged as a scientifically and technologically interesting platform for realizing efficient and compact SOT systems. Here, we demonstrate external-magnetic-field-free switching of perpendicular magnetization in a single-phase ferromagnetic and spin Hall oxide SrRuO3. We delicately altered the local lattices of the top and bottom surface layers of SrRuO3, while retaining a quasi-homogeneous, single-crystalline nature of the SrRuO3 bulk. This leads to unbalanced spin Hall effects between the top and bottom layers, enabling net SOT performance within single-layer ferromagnetic SrRuO3. Notably, our SrRuO3 exhibits the highest SOT efficiency and lowest power consumption among all known single-layer systems under field-free conditions. Our method of artificially manipulating the local atomic structures will pave the way for advances in spin-orbitronics and the exploration of new SOT materials.

Field-Free Manipulation of Two-Dimensional Ferromagnet CrTe2 by Spin-Orbit Torques

Electrical manipulation of magnetic states in two-dimensional ferromagnetic systems is crucial in information storage and low-dimensional spintronics. Spin-orbit torque presents a rapid and energy-efficient method for electrical control of the magnetization. In this letter, we demonstrate a wafer-scale spin-orbit torque switching of two-dimensional ferromagnetic states. Using molecular beam epitaxy, we fabricate two-dimensional heterostructures composed of low crystal-symmetry WTe2 and ferromagnet CrTe2 with perpendicular anisotropy. By utilizing out-of-plane spins generated from WTe2, we achieve field-free switching of the CrTe2 perpendicular magnetization. The threshold switching current density in CrTe2/WTe2 is 1.2 × 106 A/cm2, 20 times smaller than that of the CrTe2/Pt control sample even with an external magnetic field. In addition, the switching behavior can be modulated by external magnetic fields and crystal symmetry. Our findings demonstrate a controllable and all-electric manipulation of perpendicular magnetization in a two-dimensional ferromagnet, representing a significant advancement toward the practical implementation of low-dimensional spintronic devices.

Current-induced domain wall motion in a van der Waals ferromagnet Fe3GeTe2

The manipulation of spin textures by spin currents is of fundamental and technological interest. A particularly interesting system is the 2D van der Waals ferromagnet Fe3GeTe2, in which Néel-type skyrmions have recently been observed. The origin of these chiral spin textures is of considerable interest. Recently, it was proposed that these derive from defects in the structure that lower the symmetry and allow for a bulk vector Dzyaloshinsky-Moriya interaction. Here, we demonstrate current-induced domain wall motion in Fe3GeTe2 flakes, in which the maximum domain wall velocity is an order of magnitude higher than those reported in previous studies. In heterostructures with Pt or W layers on top of the Fe3GeTe2 flakes, domain walls can be moved via a combination of spin transfer and spin-orbit torques. The competition between these torques leads to a change in the direction of domain wall motion with increasing magnitude of the injected current.

Highly Efficient Room-Temperature Spin-Orbit-Torque Switching in a Van der Waals Heterostructure of Topological Insulator and Ferromagnet

All-Van der Waals (vdW)-material-based heterostructures with atomically sharp interfaces offer a versatile platform for high-performing spintronic functionalities at room temperature. One of the key components is vdW topological insulators (TIs), which can produce a strong spin-orbit-torque (SOT) through the spin-momentum locking of their topological surface state (TSS). However, the relatively low conductance of the TSS introduces a current leakage problem through the bulk states of the TI or the adjacent ferromagnetic metal layers, reducing the interfacial charge-to-spin conversion efficiency (qICS). Here, a vdW heterostructure is used consisting of atomically-thin layers of a bulk-insulating TI Sn-doped Bi1.1Sb0.9Te2S1 and a room-temperature ferromagnet Fe3GaTe2, to enhance the relative current ratio on the TSS up to ≈20%. The resulting qICS reaches ≈1.65 nm-1 and the critical current density Jc ≈0.9 × 106 Acm-2 at 300 K, surpassing the performance of TI-based and heavy-metal-based SOT devices. These findings demonstrate that an all-vdW heterostructure with thickness optimization offers a promising platform for efficient current-controlled magnetization switching at room temperature.

Large out-of-plane spin-orbit torque in topological Weyl semimetal TaIrTe4

The unique electronic properties of topological quantum materials, such as protected surface states and exotic quasiparticles, can provide an out-of-plane spin-polarized current needed for external field-free magnetization switching of magnets with perpendicular magnetic anisotropy. Conventional spin-orbit torque (SOT) materials provide only an in-plane spin-polarized current, and recently explored materials with lower crystal symmetries provide very low out-of-plane spin-polarized current components, which are not suitable for energy-efficient SOT applications. Here, we demonstrate a large out-of-plane damping-like SOT at room temperature using the topological Weyl semimetal candidate TaIrTe4 with a lower crystal symmetry. We performed spin-torque ferromagnetic resonance (STFMR) and second harmonic Hall measurements on devices based on TaIrTe4/Ni80Fe20 heterostructures and observed a large out-of-plane damping-like SOT efficiency. The out-of-plane spin Hall conductivity is estimated to be (4.05 ± 0.23)×104 (ℏ ⁄ 2e) (Ωm)-1, which is an order of magnitude higher than the reported values in other materials.

Direct Observation of Room-Temperature Magnetic Skyrmion Motion Driven by Ultra-Low Current Density in Van Der Waals Ferromagnets

The recent discovery of room-temperature ferromagnetism in 2D van der Waals (vdW) materials, such as Fe3GaTe2 (FGaT), has garnered significant interest in offering a robust platform for 2D spintronic applications. Various fundamental operations essential for the realization of 2D spintronics devices are experimentally confirmed using these materials at room temperature, such as current-induced magnetization switching or tunneling magnetoresistance. Nevertheless, the potential applications of magnetic skyrmions in FGaT systems at room temperature remain unexplored. In this work, the current-induced generation of magnetic skyrmions in FGaT flakes employing high-resolution magnetic transmission soft X-ray microscopy is introduced, supported by a feasible mechanism based on thermal effects. Furthermore, direct observation of the current-induced magnetic skyrmion motion at room temperature in FGaT flakes is presented with ultra-low threshold current density. This work highlights the potential of FGaT as a foundation for room-temperature-operating 2D skyrmion device applications.

Field-free deterministic switching of all-van der Waals spin-orbit torque system above room temperature

Two-dimensional van der Waals (vdW) magnetic materials hold promise for the development of high-density, energy-efficient spintronic devices for memory and computation. Recent breakthroughs in material discoveries and spin-orbit torque control of vdW ferromagnets have opened a path for integration of vdW magnets in commercial spintronic devices. However, a solution for field-free electric control of perpendicular magnetic anisotropy (PMA) vdW magnets at room temperatures, essential for building compact and thermally stable spintronic devices, is still missing. Here, we report a solution for the field-free, deterministic, and nonvolatile switching of a PMA vdW ferromagnet, Fe3GaTe2, above room temperature (up to 320 K). We use the unconventional out-of-plane anti-damping torque from an adjacent WTe2 layer to enable such switching with a low current density of 2.23 × 106 A cm-2. This study exemplifies the efficacy of low-symmetry vdW materials for spin-orbit torque control of vdW ferromagnets and provides an all-vdW solution for the next generation of scalable and energy-efficient spintronic devices.

Room-Temperature, Current-Induced Magnetization Self-Switching in A Van Der Waals Ferromagnet

2D layered materials with broken inversion symmetry are being extensively pursued as  spin source layers to realize high-efficiency magnetic switching. Such low-symmetry layered systems are, however, scarce. In addition, most layered magnets with perpendicular magnetic anisotropy show a low Curie temperature. Here, the experimental observation of spin-orbit torque magnetization self-switching at room temperature in a layered polar ferromagnetic metal, Fe2.5 Co2.5 GeTe2 is reported. The spin-orbit torque is generated from the broken inversion symmetry along the c-axis of the crystal. These results provide a direct pathway toward applicable 2D spintronic devices.

Current-induced switching of a van der Waals ferromagnet at room temperature

Recent discovery of emergent magnetism in van der Waals magnetic materials (vdWMM) has broadened the material space for developing spintronic devices for energy-efficient computation. While there has been appreciable progress in vdWMM discovery, a solution for non-volatile, deterministic switching of vdWMMs at room temperature has been missing, limiting the prospects of their adoption into commercial spintronic devices. Here, we report the first demonstration of current-controlled non-volatile, deterministic magnetization switching in a vdW magnetic material at room temperature. We have achieved spin-orbit torque (SOT) switching of the PMA vdW ferromagnet Fe3GaTe2 using a Pt spin-Hall layer up to 320 K, with a threshold switching current density as low as [Formula: see text]1.69 [Formula: see text] 106 A cm-2 at room temperature. We have also quantitatively estimated the anti-damping-like SOT efficiency of our Fe3GaTe2/Pt bilayer system to be [Formula: see text], using the second harmonic Hall voltage measurement technique. These results mark a crucial step in making vdW magnetic materials a viable choice for the development of scalable, energy-efficient spintronic devices.

Spin-Orbit Torques and Magnetization Switching in (Bi,Sb)2Te3/Fe3GeTe2 Heterostructures Grown by Molecular Beam Epitaxy

Topological insulators (TIs) hold promise for manipulating the magnetization of a ferromagnet (FM) through the spin-orbit torque (SOT) mechanism. However, integrating TIs with conventional FMs often leads to significant device-to-device variations and a broad distribution of SOT magnitudes. In this work, we present a scalable approach to grow a full van der Waals FM/TI heterostructure by molecular beam epitaxy, combining the charge-compensated TI (Bi,Sb)2Te3 with 2D FM Fe3GeTe2 (FGT). Harmonic magnetotransport measurements reveal that the SOT efficiency exhibits a non-monotonic temperature dependence and experiences a substantial enhancement with a reduction of the FGT thickness to 2 monolayers. Our study further demonstrates that the magnetization of ultrathin FGT films can be switched with a current density of Jc ∼ 1010 A/m2, with minimal device-to-device variations compared to previous investigations involving traditional FMs.

Highly Efficient Spin-Orbit Torque Switching in Bi2Se3/Fe3GeTe2 van der Waals Heterostructures

Topological insulators (TIs) have shown promise as a spin-generating layer to switch the magnetization state of ferromagnets via spin-orbit torque (SOT) due to charge-to-spin conversion efficiency of the TI surface states that arises from spin-momentum locking. However, when TIs are interfaced with conventional bulk ferromagnetic metals, the combination of charge transfer and hybridization can potentially destroy the spin texture and hamper the possibility of accessing the TI surface states. Here, we fabricate an all van der Waals (vdW) heterostructure consisting of molecular beam epitaxy grown bulk-insulating Bi2Se3 and exfoliated 2D metallic ferromagnet Fe3GeTe2 (FGT) with perpendicular anisotropy. By detecting the magnetization state of the FGT via anomalous Hall effect and magneto-optical Kerr effect measurements, we determine the critical switching current density for magnetization switching to be Jc ≈ 1.2 × 106 A/cm2, the lowest reported for the switching of a perpendicular anisotropy ferromagnet using Bi2Se3. From second harmonic Hall measurements, we further determine the SOT efficiency (ξDL) to be in the range of 1.8 ± 0.3 and 1.4 ± 0.08 between 5 and 150 K, comparable to the highest values reported for Bi2Se3. Our density functional theory calculations find that the weak interlayer interactions at the Bi2Se3/FGT interface lead to a weakened dipole at the interface and suppress the proximity induced magnetic moment on Bi2Se3. This enables direct access to the TI surface states contributed by the first quintuple layer, where the spins are singly degenerate with significant net in-plane spin polarization. Our results highlight the clear advantage of all-vdW heterostructures with weak interlayer interactions that can enhance SOT efficiency and minimize critical current density, an important step toward realizing next generation low-power nonvolatile memory and spintronic devices.

Recent advances in two-dimensional intrinsic ferromagnetic materials Fe3X(X=Ge and Ga)Te2 and their heterostructures for spintronics

Owing to their atomic thicknesses, atomically flat surfaces, long-range spin textures and captivating physical properties, two-dimensional (2D) magnetic materials, along with their van der Waals heterostructures (vdWHs), have attracted much interest for the development of next-generation spin-based materials and devices. As an emergent family of intrinsic ferromagnetic materials, Fe3X(X=Ge and Ga)Te2 has become a rising star in the fields of condensed matter physics and materials science owing to their high Curie temperature and large perpendicular magnetic anisotropy. Herein, we aim to comprehensively summarize the recent progress on 2D Fe3X(X=Ge and Ga)Te2 and their vdWHs and provide a panorama of their physical properties and underlying mechanisms. First, an overview of Fe3X(X=Ge and Ga)Te2 is presented in terms of crystalline and electronic structures, distinctive physical properties and preparation methods. Subsequently, the engineering of electronic and spintronic properties of Fe3X(X=Ge and Ga)Te2 by diverse means, including strain, gate voltage, substrate and patterning, is surveyed. Then, the latest advances in spintronic devices based on 2D Fe3X(X=Ge and Ga)Te2 vdWHs are discussed and elucidated in detail, including vdWH devices that exploit the exchange bias effect, magnetoresistance effect, spin-orbit torque effect, magnetic proximity effect and Dzyaloshinskii-Moriya interaction. Finally, the future outlook is given in terms of efficient large-scale fabrication, intriguing physics and important technological applications of 2D Fe3X(X=Ge and Ga)Te2 and their vdWHs. Overall, this study provides an overview to support further studies of emergent 2D Fe3X(X=Ge and Ga)Te2 materials and related vdWH devices for basic science and practical applications.

Room-Temperature van der Waals Ferromagnet Switching by Spin-Orbit Torques

The emerging wide varieties of the van der Waals (vdW) magnets with atomically thin and smooth interfaces hold great promise for next-generation spintronic devices. However, due to the lower Curie temperature of the vdW ferromagnets than room temperature, electrically manipulating its magnetization at room temperature has not been realized. In this work, it is demonstrated that the perpendicular magnetization of the vdW ferromagnet Fe3 GaTe2 can be effectively switched at room temperature in the Fe3 GaTe2 /Pt bilayer by spin-orbit torques (SOTs) with a relatively low current density of 1.3 × 107 A cm-2 . Moreover, the high SOT efficiency of ξDL ≈ 0.28 is quantitatively determined by harmonic measurements, which is higher than those in Pt-based heavy metal/conventional ferromagnet devices. The findings of room-temperature vdW ferromagnet switching by SOTs provide a significant basis for the development of vdW-ferromagnet-based spintronic applications.

Room-temperature orbit-transfer torque enabling van der Waals magnetoresistive memories

The non-volatile magnetoresistive random access memory (MRAM) is believed to facilitate emerging applications, such as in-memory computing, neuromorphic computing and stochastic computing. Two-dimensional (2D) materials and their van der Waals heterostructures promote the development of MRAM technology, due to their atomically smooth interfaces and tunable physical properties. Here we report the all-2D magnetoresistive memories featuring all-electrical data reading and writing at room temperature based on WTe2/Fe3GaTe2/BN/Fe3GaTe2 heterostructures. The data reading process relies on the tunnel magnetoresistance of Fe3GaTe2/BN/Fe3GaTe2. The data writing is achieved through current induced polarization of orbital magnetic moments in WTe2, which exert torques on Fe3GaTe2, known as the orbit-transfer torque (OTT) effect. In contrast to the conventional reliance on spin moments in spin-transfer torque and spin-orbit torque, the OTT effect leverages the natural out-of-plane orbital moments, facilitating field-free perpendicular magnetization switching through interface currents. Our results indicate that the emerging OTT-MRAM is promising for low-power, high-performance memory applications.

Interplay between Local Moment and Itinerant Magnetism in the Layered Metallic Antiferromagnet TaFe1.14Te3

Two-dimensional antiferromagnets have garnered considerable interest for the next generation of functional spintronics. However, many bulk materials from which two-dimensional antiferromagnets are isolated are limited by their air sensitivity, low ordering temperatures, and insulating transport properties. TaFe1+yTe3 aims to address these challenges with increased air stability, metallic transport, and robust antiferromagnetism. Here, we synthesize TaFe1+yTe3 (y = 0.14), identify its structural, magnetic, and electronic properties, and elucidate the relationships between them. Axial-dependent high-field magnetization measurements on TaFe1.14Te3 reveal saturation magnetic fields ranging between 27 and 30 T with saturation magnetic moments of 2.05-2.12 μB. Magnetotransport measurements confirm that TaFe1.14Te3 is metallic with strong coupling between magnetic order and electronic transport. Angle-resolved photoemission spectroscopy measurements across the magnetic transition uncover a complex interplay between itinerant electrons and local magnetic moments that drives the magnetic transition. We demonstrate the ability to isolate few-layer sheets of TaFe1.14Te3, establishing TaFe1.14Te3 as a potential platform for two-dimensional spintronics.

Room temperature field-free switching of perpendicular magnetization through spin-orbit torque originating from low-symmetry type II Weyl semimetal

Spin-orbit torque (SOT) is a promising strategy to deterministically switch the perpendicular magnetization, but usually requires an in-plane magnetic field for breaking the mirror symmetry, which is not suitable for most advanced industrial applications. Van der Waals (vdW) materials with low crystalline symmetry and topological band structures, e.g., Weyl semimetals (WSMs), potentially serve as an outstanding system that may simultaneously realize field-free switching and high energy efficiency. Yet, the demonstration of these superiorities at room temperature has not been realized. Here, we achieve a field-free switching of perpendicular magnetization by using a layered type II WSM, TaIrTe4, in a TaIrTe4/Ti/CoFeB system at room temperature with the critical switching current density ~2.4 × 106 A cm-2. The field-free switching is ascribed to the out-of-plane SOT allowed by the low crystal symmetry. Our work suggests that using low-symmetry materials to generate SOT is a promising route for the manipulation of perpendicular magnetization at room temperature.

Recent advances in 2D van der Waals magnets: Detection, modulation, and applications

The emergence of two-dimensional (2D) van der Waals magnets provides an exciting platform for exploring magnetism in the monolayer limit. Exotic quantum phenomena and significant potential for spintronic applications are demonstrated in 2D magnetic crystals and heterostructures, which offer unprecedented possibilities in advanced formation technology with low power and high efficiency. In this review, we summarize recent advances in 2D van der Waals magnetic crystals. We focus mainly on van der Waals materials of truly 2D nature with intrinsic magnetism. The detection methods of 2D magnetic materials are first introduced in detail. Subsequently, the effective strategies to modulate the magnetic behavior of 2D magnets (e.g., Curie temperature, magnetic anisotropy, magnetic exchange interaction) are presented. Then, we list the applications of 2D magnets in the spintronic devices. We also highlight current challenges and broad space for the development of 2D magnets in further studies.

Fe-Intercalation Dominated Ferromagnetism of van der Waals Fe3 GeTe2

Fe3 GeTe2 have proven to be of greatly intrigue. However, the underlying mechanism behind the varying Curie temperature (Tc ) values remains a puzzle. This study explores the atomic structure of Fe3 GeTe2 crystals exhibiting Tc values of 160, 210, and 230 K. The elemental mapping reveals a Fe-intercalation on the interstitial sites within the van der Waals gap of the high-Tc (210 and 230 K) samples, which are observed to have an exchange bias effect by electrical transport measurements, while Fe intercalation or the bias effect is absent in the low-Tc (160 K) samples. First-principles calculations further suggest that the Fe-intercalation layer may be responsible for the local antiferromagnetic coupling that gives rise to the exchange bias effect, and that the interlayer exchange paths greatly contribute to the enhancement of Tc . This discovery of the Fe-intercalation layer elucidates the mechanism behind the hidden antiferromagnetic ordering that underlies the enhancement of Tc in Fe3 GeTe2 .

Room temperature energy-efficient spin-orbit torque switching in two-dimensional van der Waals Fe3GeTe2 induced by topological insulators

Two-dimensional (2D) ferromagnetic materials with unique magnetic properties have great potential for next-generation spintronic devices with high flexibility, easy controllability, and high heretointegrability. However, realizing magnetic switching with low power consumption at room temperature is challenging. Here, we demonstrate the room-temperature spin-orbit torque (SOT) driven magnetization switching in an all-van der Waals (vdW) heterostructure using an optimized epitaxial growth approach. The topological insulator Bi2Te3 not only raises the Curie temperature of Fe3GeTe2 (FGT) through interfacial exchange coupling but also works as a spin current source allowing the FGT to switch at a low current density of ~2.2×106 A/cm2. The SOT efficiency is ~2.69, measured at room temperature. The temperature and thickness-dependent SOT efficiency prove that the larger SOT in our system mainly originates from the nontrivial topological origin of the heterostructure. Our experiments enable an all-vdW SOT structure and provides a solid foundation for the implementation of room-temperature all-vdW spintronic devices in the future.

Proximity-Induced Tunable Magnetic Order at the Interface of All-van der Waals-Layered Heterostructures

Spin-orbit coupling (SOC) plays a crucial role in controlling the spin-charge conversion efficiency, spin torque, and complex magnetic spin structures. In this study, we investigate the interplay between SOC and ferromagnetism in heterostructures of large-SOC and magnetic materials. We highlight the importance of the SOC-proximity effect on magnetic ordering in all-van der Waals-layered heterostructures, specifically Fe3GeTe2(FGT)/monolayer W1-xVxSe2 (x = 0 and 0.05). By increasing the SOC strength, we demonstrate various magnetic orderings induced at the interface of the heterostructure, including spin-flop, spin-flip, and inverted magnetization. Moreover, we show a sharp magnetic switching from antiferromagnetic state to ferromagnetic state in FGT/W0.95V0.05Se2, which is characteristic of the synthetic antiferromagnetic structure. This proof-of-concept result offers the possibility of interface-tailoring spintronics, including two-dimensional magnetoresistive random access memory toggle switching. Our findings provide insight into the design and development of next-generation spintronic devices by exploiting the interplay between SOC and magnetic ordering in all-van der Waals-layered heterostructures.

Gigantic Anisotropy of Self-Induced Spin-Orbit Torque in Weyl Ferromagnet Co2MnGa

Spin-orbit torque (SOT) is receiving tremendous attention from both fundamental and application-oriented aspects. Co2MnGa, a Weyl ferromagnet that is in a class of topological quantum materials, possesses cubic-based high structural symmetry, the L21 crystal ordering, which should be incapable of hosting anisotropic SOT in conventional understanding. Here we show the discovery of a gigantic anisotropy of self-induced SOT in Co2MnGa. The magnitude of the SOT is comparable to that of heavy metal/ferromagnet bilayer systems, despite the high inversion symmetry of the Co2MnGa structure. More surprisingly, a sign inversion of the self-induced SOT is observed for different crystal axes. This finding stems from the interplay of the topological nature of the electronic states and their strong modulation by external strain. Our research enriches the understanding of the physics of self-induced SOT and demonstrates a versatile method for tuning SOT efficiencies in a wide range of materials for topological and spintronic devices.

2D Ferroic Materials for Nonvolatile Memory Applications

The emerging nonvolatile memory technologies based on ferroic materials are promising for producing high-speed, low-power, and high-density memory in the field of integrated circuits. Long-range ferroic orders observed in 2D materials have triggered extensive research interest in 2D magnets, 2D ferroelectrics, 2D multiferroics, and their device applications. Devices based on 2D ferroic materials and heterostructures with an atomically smooth interface and ultrathin thickness have exhibited impressive properties and significant potential for developing advanced nonvolatile memory. In this context, a systematic review of emergent 2D ferroic materials is conducted here, emphasizing their recent research on nonvolatile memory applications, with a view to proposing brighter prospects for 2D magnetic materials, 2D ferroelectric materials, 2D multiferroic materials, and their relevant devices.

A Room-Temperature Spin-Valve with van der Waals Ferromagnet Fe5 GeTe2 /Graphene Heterostructure

The discovery of van der Waals (vdW) magnets opened a new paradigm for condensed matter physics and spintronic technologies. However, the operations of active spintronic devices with vdW ferromagnets are limited to cryogenic temperatures, inhibiting their broader practical applications. Here, the robust room-temperature operation of lateral spin-valve devices using the vdW itinerant ferromagnet Fe₅ GeTe₂ in heterostructures with graphene is demonstrated. The room-temperature spintronic properties of Fe₅ GeTe₂ are measured at the interface with graphene with a negative spin polarization. Lateral spin-valve and spin-precession measurements provide unique insights by probing the Fe₅ GeTe₂ /graphene interface spintronic properties via spin-dynamics measurements, revealing multidirectional spin polarization. Density functional theory calculations in conjunction with Monte Carlo simulations reveal significantly canted Fe magnetic moments in Fe₅ GeTe₂ along with the presence of negative spin polarization at the Fe₅ GeTe₂ /graphene interface. These findings open opportunities for vdW interface design and applications of vdW-magnet-based spintronic devices at ambient temperatures.

Spin filters based on two-dimensional materials Co2Si and Cu2Si

Spintronic devices have several advantages compared with conventional electronic devices, including non-volatility, faster data processing speed, higher integration densities, less electric power consumption and so on. However, we still face challenges for efficiently generating and injecting pure spin polarized current. In this work, we utilize two kinds of two-dimensional materials Co2Si and Cu2Si with both lattice match and band match to construct devices and then research their spin filter efficiency. The spin filter efficiency can be improved effectively either by an appropriate gate voltage at Co2Si region, or by series connection. In both cases the filter efficiencies are much larger than two-dimensional prepared Fe3GeTe2spin valve and ferromagnetic metallic chairlike O-graphene-H. Also at a quite small bias, we obtain a comparable spin polarized current as those obtained in Fe3GeTe2spin valve and O-graphene-H obtained at a much larger bias.

All-electrical switching of a topological non-collinear antiferromagnet at room temperature

Non-collinear antiferromagnetic Weyl semimetals, combining the advantages of a zero stray field and ultrafast spin dynamics, as well as a large anomalous Hall effect and the chiral anomaly of Weyl fermions, have attracted extensive interest. However, the all-electrical control of such systems at room temperature, a crucial step toward practical application, has not been reported. Here, using a small writing current density of around 5 × 10⁶ A·cm^-2, we realize the all-electrical current-induced deterministic switching of the non-collinear antiferromagnet Mn₃Sn, with a strong readout signal at room temperature in the Si/SiO₂/Mn₃Sn/AlO_x structure, and without external magnetic field or injected spin current. Our simulations reveal that the switching originates from the current-induced intrinsic non-collinear spin-orbit torques in Mn₃Sn itself. Our findings pave the way for the development of topological antiferromagnetic spintronics.

Integrated Memory Devices Based on 2D Materials

With the advent of the Internet of Things and big data, massive data must be rapidly processed and stored within a short timeframe. This imposes stringent requirements on memory hardware implementation in terms of operation speed, energy consumption, and integration density. To fulfill these demands, 2D materials, which are excellent electronic building blocks, provide numerous possibilities for developing advanced memory device arrays with high performance, smart computing architectures, and desirable downscaling. Over the past few years, 2D-material-based memory-device arrays with different working mechanisms, including defects, filaments, charges, ferroelectricity, and spins, have been increasingly developed. These arrays can be used to implement brain-inspired computing or sensing with extraordinary performance, architectures, and functionalities. Here, recent research into integrated, state-of-the-art memory devices made from 2D materials, as well as their implications for brain-inspired computing are surveyed. The existing challenges at the array level are discussed, and the scope for future research is presented.

Two-Dimensional Van Der Waals Topological Materials: Preparation, Properties, and Device Applications

Over the past decade, 2D van der Waals (vdW) topological materials (TMs), including topological insulators and topological semimetals, which combine atomically flat 2D layers and topologically nontrivial band structures, have attracted increasing attention in condensed-matter physics and materials science. These easily cleavable and integrated TMs provide the ideal platform for exploring topological physics in the 2D limit, where new physical phenomena may emerge, and represent a potential to control and investigate exotic properties and device applications in nanoscale topological phases. However, multifaced efforts are still necessary, which is the prerequisite for the practical application of 2D vdW TMs. Herein, this review focuses on the preparation, properties, and device applications of 2D vdW TMs. First, three common preparation strategies for 2D vdW TMs are summarized, including single crystal exfoliation, chemical vapor deposition, and molecular beam epitaxy. Second, the origin and regulation of various properties of 2D vdW TMs are introduced, involving electronic properties, transport properties, optoelectronic properties, thermoelectricity, ferroelectricity, and magnetism. Third, some device applications of 2D vdW TMs are presented, including field-effect transistors, memories, spintronic devices, and photodetectors. Finally, some significant challenges and opportunities for the practical application of 2D vdW TMs in 2D topological electronics are briefly addressed.

Challenges and opportunities for spintronics based on spin orbit torque

Spintronic devices based on spin orbit torque (SOT) have become the most promising pathway to the next-generation of ultralow-power nonvolatile logic and memory applications. Typical SOT-based spintronic devices consist of two functional materials: a spin source and a magnetic material. Spin source materials possess a strong spin orbit coupling, enabling efficient interconversion between charge and spin current. Magnetic materials are used to process and archive the information via the interaction between the local magnetic moment and the spin current generated from spin source. Considerable efforts have been put into the design of materials and devices in the past decades to realize the electrical control of magnetic switching. However, a number of key challenges still remain to be addressed for the practical application. In this paper, we reviewed the development of a range of novel materials for both the spin source and the magnetic functionalities, particularly the complex oxides and organic spintronic materials. We also discussed and highlighted several key issues, such as the mechanism and manipulation of SOT and the large-scale integration of SOT-based devices, which merit more attention in the future.

Two-dimensional materials prospects for non-volatile spintronic memories

Non-volatile magnetic random-access memories (MRAMs), such as spin-transfer torque MRAM and next-generation spin-orbit torque MRAM, are emerging as key to enabling low-power technologies, which are expected to spread over large markets from embedded memories to the Internet of Things. Concurrently, the development and performances of devices based on two-dimensional van der Waals heterostructures bring ultracompact multilayer compounds with unprecedented material-engineering capabilities. Here we provide an overview of the current developments and challenges in regard to MRAM, and then outline the opportunities that can arise by incorporating two-dimensional material technologies. We highlight the fundamental properties of atomically smooth interfaces, the reduced material intermixing, the crystal symmetries and the proximity effects as the key drivers for possible disruptive improvements for MRAM at advanced technology nodes.

Quantum-Engineered Devices Based on 2D Materials for Next-Generation Information Processing and Storage

As an approximation to the quantum state of solids, the band theory, developed nearly seven decades ago, fostered the advance of modern integrated solid-state electronics, one of the most successful technologies in the history of human civilization. Nonetheless, their rapidly growing energy consumption and accompanied environmental issues call for more energy-efficient electronics and optoelectronics, which necessitate the exploration of more advanced quantum mechanical effects, such as band-to-band tunneling, spin-orbit coupling, spin-valley locking, and quantum entanglement. The emerging 2D layered materials, featured by their exotic electrical, magnetic, optical, and structural properties, provide a revolutionary low-dimensional and manufacture-friendly platform (and many more opportunities) to implement these quantum-engineered devices, compared to the traditional electronic materials system. Here, the progress in quantum-engineered devices is reviewed and the opportunities/challenges of exploiting 2D materials are analyzed to highlight their unique quantum properties that enable novel energy-efficient devices, and useful insights to quantum device engineers and 2D-material scientists are provided.