Near-Infrared Materials: The Turning Point of Organic Photovoltaics

Understanding photochemical degradation mechanisms in photoactive layer materials for organic solar cells

Over the past decades, the field of organic solar cells (OSCs) has witnessed a significant evolution in materials chemistry, which has resulted in a remarkable enhancement of device performance, achieving efficiencies of over 19%. The photoactive layer materials in OSCs play a crucial role in light absorption, charge generation, transport and stability. To facilitate the scale-up of OSCs, it is imperative to address the photostability of these electron acceptor and donor materials, as their photochemical degradation process remains a challenge during the photo-to-electric conversion. In this review, we present an overview of the development of electron acceptor and donor materials, emphasizing the crucial aspects of their chemical stability behavior that are linked to the photostability of OSCs. Throughout each section, we highlight the photochemical degradation pathways for electron acceptor and donor materials, and their link to device degradation. We also discuss the existing interdisciplinary challenges and obstacles that impede the development of photostable materials. Finally, we offer insights into strategies aimed at enhancing photochemical stability and discuss future directions for developing photostable photo-active layers, facilitating the commercialization of OSCs.

White-light activatable organic NIR-II luminescence nanomaterials for imaging-guided surgery

While second near-infrared (NIR-II) fluorescence imaging is a promising tool for real-time surveillance of surgical operations, the previously reported organic NIR-II luminescent materials for in vivo imaging are predominantly activated by expensive lasers or X-ray with high power and poor illumination homogeneity, which significantly limits their clinical applications. Here we report a white-light activatable NIR-II organic imaging agent by taking advantages of the strong intramolecular/intermolecular D-A interactions of conjugated Y6CT molecules in nanoparticles (Y6CT-NPs), with the brightness of as high as 13315.1, which is over two times that of the brightest laser-activated NIR-II organic contrast agents reported thus far. Upon white-light activation, Y6CT-NPs can achieve not only in vivo imaging of hepatic ischemia reperfusion, but also real-time monitoring of kidney transplantation surgery. During the surgery, identification of the renal vasculature, post-reconstruction assessment of renal allograft vascular integrity, and blood supply analysis of the ureter can be vividly depicted by using Y6CT-NPs with high signal-to-noise ratios upon clinical laparoscopic LED white-light activation. Our work provides efficient molecular design guidelines towards white-light activatable imaging agent and highlights an opportunity for precision imaging theranostics.

Colorless Near-Infrared Absorbing Dyes Based on B-N Fused Donor-Acceptor-Donor π-Conjugated Molecules for Organic Phototransistors

The introduction of a colorless function to organic electronic devices allows responses to light in the near-infrared (NIR) region and is expected to broaden the applications of these devices. However, the development of a colorless NIR dye remains a challenge due to the lack of a rational molecular design for controlling electronic transitions. In this study, to suppress the π-π* transitions in the visible region, polycyclic donor-acceptor-donor π-conjugated molecules with boron bridges (Py-FNTz-B and IP-FNTz-B) are designed and synthesized, which contain pyrrole or indenopyrrole as donor units with fluorinated naphthobisthiadiazole (FNTz) as an acceptor unit. The pyrrole end-capped Py-FNTz-B shows an absorption band in the NIR region without distinct visible-light absorption, which has led to the establishment of colorless characteristics. The indenopyrrole end-capped IP-FNTz-B shows a narrow optical energy gap of 0.87 eV in films. Time-resolved microwave conductance and field-effect transistors demonstrate the semiconducting characteristics of these molecules, and Py-FNTz-B-based devices function as NIR phototransistors. Theoretical analyses indicate that the combination of a polyene-like electronic structure with orbital symmetry is important to obtain NIR wavelength-selective absorption. This study suggests that a molecular design based on electronic structures can be effective in the development of colorless NIR-absorbing dyes for organic electronics.

Ultranarrow-bandgap small-molecule acceptor enables sensitive SWIR detection and dynamic upconversion imaging

Short-wavelength infrared (SWIR) light detection plays a key role in modern technologies. Emerging solution-processed organic semiconductors are promising for cost-effective, flexible, and large-area SWIR organic photodiodes (OPDs). However, the spectral responsivity (R) and specific detectivity (D*) of SWIR OPDs are restricted by insufficient exciton dissociation and high noise current. In this work, we synthesized an SWIR small molecule with a spectral coverage of 0.3 to 1.3 micrometers peaking at 1100 nanometers. The photodiode, with optimized exciton dissociation, charge injection, and SWIR transmittance, achieves a record high R of 0.53 ampere per watt and D* of 1.71 × 1013 Jones at 1110 nanometers under zero bias. The D* at 1 to 1.2 micrometers surpasses that of the uncooled commercial InGaAs photodiode. Furthermore, large-area semitransparent all-organic upconversion devices integrating the SWIR photodiode realized static and dynamic SWIR-to-visible imaging, along with excellent upconversion efficiency and spatial resolution. This work provides alternative insights for developing sensitive organic SWIR detection.

Plasmonic Near-Infrared-Response S-Scheme ZnO/CuInS2 Photocatalyst for H2O2 Production Coupled with Glycerin Oxidation

Solar fuel synthesis is intriguing because solar energy is abundant and this method compensates for its intermittency. However, most photocatalysts can only absorb UV-to-visible light, while near-infrared (NIR) light remains unexploited. Surprisingly, the charge transfer between ZnO and CuInS2 quantum dots (QDs) can transform a NIR-inactive ZnO into a NIR-active composite. This strong response is attributed to the increased concentration of free charge carriers in the p-type semiconductor at the interface after the charge migration between ZnO and CuInS2, enhancing the localized surface plasmon resonance (LSPR) effect and the NIR response of CuInS2. As a paradigm, this ZnO/CuInS2 heterojunction is used for H2O2 production coupled with glycerin oxidation and demonstrates supreme performance, corroborating the importance of NIR response and efficient charge transfer. Mechanistic studies through contact potential difference (CPD), Hall effect test, and finite element method (FEM) calculation allow for the direct correlation between the NIR response and charge transfer. This approach bypasses the general light response issues, thereby stepping forward to the ambitious goal of harnessing the entire solar spectrum.

Metalla-Carbaporphyrinoids Consisting of an Acyclic N-Confused Tetrapyrrole Analogue Served as Stable Near-Infrared-II Dyes

We present herein the synthesis of novel pseudo-metalla-carbaporphyrinoid species (1M: M=Pd and Pt) achieved through the inner coordination of palladium(II) and platinum(II) with an acyclic N-confused tetrapyrrin analogue. Despite their tetrapyrrole frameworks being small, akin to well-known porphyrins, these species exhibit an unusually narrow HOMO-LUMO gap, resulting in an unprecedentedly low-energy absorption in the second near-infrared (NIR-II) region. Density functional theory (DFT) calculations revealed unique dπ-pπ-conjugated electronic structures involving the metal dπ-ligand pπ hybridized molecular orbitals of 1M. Magnetic circular dichroism (MCD) spectroscopy confirmed distinct electronic structures. Remarkably, the complexes feature an open-metal coordination site in the peripheral NN dipyrrin site, forming hetero-metal complexes (1Pd-BF2 and 1Pt-BF2) through boron difluoride complexation. The resulting hetero metalla-carbaporphyrinoid species displayed further redshifted NIR-II absorption, highly efficient photothermal conversion efficiencies (η; 62-65 %), and exceptional photostability. Despite the challenges associated with the theoretical and experimental assessment of dπ-pπ-conjugated metalla-aromaticity in relatively larger (more than 18π electrons) polycyclic ring systems, these organometallic planar tetrapyrrole systems could serve as potential molecular platforms for aromaticity-relevant NIR-II dyes.

NIR-II Absorption/Fluorescence of D-A π-Conjugated Polymers Composed of Strong Electron Acceptors Based on Boron-Fused Azobenzene Complexes

Luminescence in the second near-infrared (NIR-II, 1,000-1,700 nm) window is beneficial especially for deep tissue imaging and optical sensors because of intrinsic high permeability through various media. Strong electron-acceptors with low-lying lowest unoccupied molecular orbital (LUMO) energy levels are a crucial unit for donor-acceptor (D-A) π-conjugated polymers (CPs) with the NIR-II emission property, however, limited kinds of molecular skeletons are still available. Herein, D-A CPs involving fluorinated boron-fused azobenzene complexes (BAz) with enhanced electron-accepting properties are reported. Combination of fluorination at the azobenzene ligand and trifluoromethylation at the boron can effectively lower the LUMO energy level down to -4.42 eV, which is much lower than those of conventional strong electron-acceptors. The synthesized series of CPs showed excellent absorption/fluorescence property in solution over a wide NIR range including NIR-II. Furthermore, owing to the inherent solid-state emissive property of the BAz skeleton, obvious NIR-II fluorescence from the film (up to λFL=1213 nm) and the nanoparticle in water (λFL=1036 nm, brightness=up to 29 cm-1 M-1) were observed, proposing that our materials are applicable for developing next-generation of NIR-II luminescent materials.

Achieving Smart Photochromics Using Water-Processable, High-Contrast, Oxygen-Sensing, and Photoactuating Thiazolothiazole-Embedded Polymer Films

Water-soluble dipyridinium thiazolo[5,4-d]thiazole (TTz) compounds are incorporated into inexpensive poly(vinyl alcohol) (PVA)/borax films and exhibit fast (<1 s), high-contrast photochromism, photofluorochromism, and oxygen sensing. Under illumination, the films change from clear/yellow TTz2+ to purple TTz•+ and then blue TTz0. The contrast and speed of the photochromism are dependent on the polymer matrix redox properties and the concentration of TTz2+. The photoreduced films exhibit strong, near-infrared light (1000-1500 nm) absorbances in addition to visible color changes. Spectroscopic ellipsometry was used to establish the complex dielectric function for the TTz2+ and TTz0 states. Incorporating non-photochromic dyes yields yellow-to-green and pink-to-purple photochromism. Additionally, when illuminated, reversible photoactuation occurs, causing mechanical contraction in the TTz-embedded films. The blue film returns to its colorless state via exposure to O2, making the films able to sense oxygen and leak direction for smart packaging. These films show potential for use in self-tinting smart windows, eyeglasses, displays, erasable memory devices, fiber optic communication, and oxygen sensing.

Extension of nature's NIR-I chromophore into the NIR-II region

The development of chromophores that absorb in the near-infrared (NIR) region beyond 1000 nm underpins numerous applications in medical and energy sciences, yet also presents substantial challenges to molecular design and chemical synthesis. Here, the core bacteriochlorin chromophore of nature's NIR absorbers, bacteriochlorophylls, has been adapted and tailored by annulation in an effort to achieve absorption in the NIR-II region. The resulting bacteriochlorin, Phen2,1-BC, contains two annulated naphthalene groups spanning meso,β-positions of the bacteriochlorin and the 1,2-positions of the naphthalene. Phen2,1-BC was prepared via a new synthetic route. Phen2,1-BC is an isomer of previously examined Phen-BC, which differs only in attachment via the 1,8-positions of the naphthalene. Despite identical π-systems, the two bacteriochlorins have distinct spectroscopic and photophysical features. Phen-BC has long-wavelength absorption maximum (912 nm), oscillator strength (1.0), and S1 excited-state lifetime (150 ps) much different than Phen2,1-BC (1292 nm, 0.23, and 0.4 ps, respectively). These two molecules and an analogue with intermediate characteristics bearing annulated phenyl rings have unexpected properties relative to those of non-annulated counterparts. Understanding the distinctions requires extending concepts beyond the four-orbital-model description of tetrapyrrole spectroscopic features. In particular, a reduction in symmetry resulting from annulation results in electronic mixing of x- and y-polarized transitions/states, as well as vibronic coupling that together reduce oscillator strength of the long-wavelength absorption manifold and shorten the S1 excited-state lifetime. Collectively, the results suggest a heuristic for the molecular design of tetrapyrrole chromophores for deep penetration into the relatively unutilized NIR-II region.

Opportunities and challenges in perovskite-organic thin-film tandem solar cells

Efficiency is paramount in enhancing the performance and cost-effectiveness of solar cells. Recent advancements in single-junction perovskite solar cells (PSCs) have yielded an impressive efficiency of 26.1%, nearing their theoretical limit. Meanwhile, multi-junction tandem solar cells exhibit a remarkable efficiency potential exceeding 42%, surpassing the 33% limit of single-junction cells, thereby opening avenues for ultra-high-efficiency solar cells. Tandem solar cells (TSCs) represent a groundbreaking photovoltaic technology, offering high efficiency, low cost, and a simple fabrication process. Among various TSCs, perovskite-organic TSCs (PO TSCs) are particularly promising due to their ability to leverage the complementary strengths of PSCs and organic solar cells (OSCs). PO TSCs are poised to outperform existing TSCs in terms of device performance, manufacturing cost, and diverse applications. The introduction of Y6-series non-fullerene acceptors (NFAs) over the past three years has significantly advanced the development of OSCs, leading to remarkable progress in PO TSCs. This paper commences by elucidating the advantages and potential of OSCs as bottom sub-cells in PO TSCs, followed by an in-depth review of mainstream interconnection layer (ICL) design. It then addresses key challenges in wide bandgap PSCs, including phase segregation, photovoltage loss, energy loss, and long-term stability. The paper concludes by examining critical factors influencing the future development of PO TSCs.

Sensitive Organic Photodetectors With Spectral Response up to 1.3 µm Using a Quinoidal Molecular Semiconductor

Detecting short-wavelength infrared (SWIR) light has underpinned several emerging technologies. However, the development of highly sensitive organic photodetectors (OPDs) operating in the SWIR region is hindered by their poor external quantum efficiencies (EQEs) and high dark currents. Herein, the development of high-sensitivity SWIR-OPDs with an efficient photoelectric response extending up to 1.3 µm is reported. These OPDs utilize a new ultralow-bandgap molecular semiconductor featuring a quinoidal tricyclic electron-deficient central unit and multiple non-covalent conformation locks. The SWIR-OPD achieves an unprecedented EQE of 26% under zero bias and an even more impressive EQE of up to 41% under a -4 V bias at 1.10 µm, effectively pushing the detection limit of silicon photodetectors. Additionally, the low energetic disorder and trap density in the active layer lead to significant suppression of thermal-generation carriers and dark current, resulting in excellent detectivity (Dsh *) exceeding 1013 Jones from 0.50 to 1.21 µm and surpassing 1012 Jones even at 1.30 µm under zero bias, marking the highest achievements for OPDs beyond the silicon limit to date. Validation with photoplethysmography measurements, a spectrometer prototype in the 0.35-1.25 µm range, and image capture under 1.20 µm irradiation demonstrate the extensive applications of this SWIR-OPD.

What We have Learnt from PM6:Y6

Over the past three years, remarkable advancements in organic solar cells (OSCs) have emerged, propelled by the introduction of Y6-an innovative A-DA'D-A type small molecule non-fullerene acceptor (NFA). This review provides a critical discussion of the current knowledge about the structural and physical properties of the PM6:Y6 material combination in relation to its photovoltaic performance. The design principles of PM6 and Y6 are discussed, covering charge transfer, transport, and recombination mechanisms. Then, the authors delve into blend morphology and degradation mechanisms before considering commercialization. The current state of the art is presented, while also discussing unresolved contentious issues, such as the blend energetics, the pathways of free charge generation, and the role of triplet states in recombination. As such, this review aims to provide a comprehensive understanding of the PM6:Y6 material combination and its potential for further development in the field of organic solar cells. By addressing both the successes and challenges associated with this system, this review contributes to the ongoing research efforts toward achieving more efficient and stable organic solar cells.

Invariant Charge Carrier Dynamics Using a Non-Planar Non-Fullerene Acceptor across Multiple Processing Solvents

Conventional non-fullerene acceptors (NFAs) typically have planar structures that can enable improved electron mobility and produce more efficient organic photovoltaic devices. A relatively simple A-D-A'-D-A type NFA specifically designed to match with poly(3-hexylthiophene-2,5-diyl) (P3HT) for green-absorbing agrivoltaic applications has been examined using a variety of techniques: microsecond transient absorption spectroscopy, atomic force microscopy, and photoluminescence. Relatively invariant charge carrier decay dynamics are observed in the blend films across a variety of processing solvents. Raman spectroscopy in conjunction with computational studies reveals that this NFA is non-planar and that multiple conformations are present in films, while preserving the crystalline nature of P3HT. The non-planarity of the NFA therefore creates a dispersive acceptor environment, irrespective of processing solvent, and this leads to the observed relative invariance in charge carrier decay dynamics and high tolerance to morphological variation. The findings presented in this work highlight the potential of non-planar materials as acceptors in organic photovoltaic devices.

Organic Optoelectronic Materials: A Rising Star of Bioimaging and Phototherapy

Recently, many organic optoelectronic materials (OOMs), especially those used in organic light-emitting diodes (OLEDs), organic solar cells (OSCs), and organic field-effect transistors (OFETs), are explored for biomedical applications including imaging and photoexcited therapies. In this review, recently developed OOMs for fluorescence imaging, photoacoustic imaging, photothermal therapy, and photodynamic therapy, are summarized. Relationships between their molecular structures, nanoaggregation structures, photophysical mechanisms, and properties for various biomedical applications are discussed. Mainly four kinds of OOMs are covered: thermally activated delayed fluorescence materials in OLEDs, conjugated small molecules and polymers in OSCs, and charge-transfer complexes in OFETs. Based on the OOMs unique optical properties, including excitation light wavelength and exciton dynamics, they are respectively exploited for suitable biomedical applications. This review is intended to serve as a bridge between researchers in the area of organic optoelectronic devices and those in the area of biomedical applications. Moreover, it provides guidance for selecting or modifying OOMs for high-performance biomedical uses. Current challenges and future perspectives of OOMs are also discussed with the hope of inspiring further development of OOMs for efficient biomedical applications.

Shortwave Infrared Organic Photodiodes Realized by Polaron Engineering

A novel approach for developing shortwave IR (SWIR) organic photodiodes (OPDs) using doped polymers is presented. SWIR OPDs are challenging to produce because of the limitations in extending the absorption of conjugated molecules and the high dark currents of SWIR-absorbing materials. Herein, it is shown that the conversion of bound polarons to free polarons by light energy can be utilized as an SWIR photodetection mechanism. To maximize the bound-polaron density and bound-to-free polaron ratio of the doped polymer film, the doping process is engineered and dopant molecules are diffused into the crystalline domain of the polymer matrix and a direct correlation between the bound-to-free polaron ratio and device performance is confirmed. The optimized double-doped SWIR OPD exhibits a high external quantum efficiency of 77 100% and specific detectivity of 1.11 × 1011 Jones against SWIR. These findings demonstrate the application potential of polarons as alternatives for Frenkel excitons in SWIR OPDs.

Structure-based screening of sp2 hybridized small donor bridges as donor: acceptor switches for optical and photovoltaic applications: DFT way

CONTEXT

This research aims to investigate the potential of pyrazine-based small donor moieties as donor-acceptor switches for optical and photovoltaic applications. The designed organic dyes have a high light harvesting efficiency (LHE) and can potentially generate significant electrical energy.

METHODS

The study focuses on understanding the structural and electronic properties of these dyes through the analysis of dihedral angles, bond lengths, and energies of frontier molecular orbitals The UV-Vis spectroscopy parameters of the designed organic dyes revealed their absorption characteristics, including transition energies, wavelengths (λmax), and oscillator strengths (f). The photovoltaic properties of the developed organic dyes show a range of values: a range of 0.95-0.99 for LHE and a range of 1.77-33.02 W for maximum power output (Pmax) with the highest value for dye DDP5. For their stabilization energies, their natural bond orbitals had values ranging from 0.56 to 128.48 kcal/mol, their E(j)E(i) values from 0.22 to 1.29 a.u, and their Fi,j values from 0.024 to 0.213 kcal/mol. Out of all dyes, the DDP5 produced highest push-pull effect and can be good choice for further studies. The design of these novel organic materials for effective and economical solar energy conversion will be aided by evaluating the potential of 5,10-diphenyl-5,10-dihydrophenazine as a donor moiety and determining the structure-property correlations controlling the photovoltaic performance of the compounds.

Solution Processed Semi-Transparent Organic Solar Cells Over 50% Visible Transmittance Enabled by Silver Nanowire Electrode with Sandwich Structure

Photovoltaic windows with easy installation for the power supply of household appliances have long been a desire of energy researchers. However, due to the lack of top electrodes that offer both high transparency and low sheet resistance, the development of high-transparency photovoltaic windows for indoor lighting scenarios has lagged significantly behind photovoltaic windows where privacy issues are involved. Addressing this issue, this work develops a solution-processable transparent top electrode using sandwich structure silver nanowires, realizing high transparency in semi-transparent organic solar cells. The wettability and conducting properties of the electrode are improved by a modified hole-transport layer named HP. The semi-transparent solar cell exhibits good see-through properties at a high average visible transmittance of 50.8%, with power conversion efficiency of 7.34%, and light utilization efficiency of 3.73%, which is the highest without optical modulations. Moreover, flexible devices based on the above-mentioned architecture also show excellent mechanical tolerance compared with Ag electrode counterparts, which retains 94.5% of their original efficiency after 1500 bending cycles. This work provides a valuable approach for fabricating solution-processed high transparency organic solar cells, which is essential in future applications in building integrated photovoltaics.

Chalcogenopheno[3,2-b]pyrrole-Containing Donor-Acceptor-Donor Organic Semiconducting Small Molecules for Organic Field-Effect Transistors

A group of chalcogenopheno[3,2-b]pyrroles, including thieno[3,2-b]pyrrole (TP), furo[3,2-b]pyrrole (FP), and selenopheno[3,2-b]pyrrole (SeP), and thieno[3,2-b]thiophene (TT) electron-donating units were coupled with a thiophene-flanked diketopyrrolo[3,4-c]pyrrole (ThDPP) acceptor to generate four donor-acceptor-donor (D-A-D) semiconducting small molecules (ThDPP-TT, ThDPP-FP, ThDPP-TP, and ThDPP-SeP). This study systematically investigated the differences between chalcogenopheno[3,2-b]pyrroles and TT. From the characterizations, chalcogenopheno[3,2-b]pyrrole-containing molecules showed lower band gaps and binding-energy cold crystallization behavior. The enthalpies of cold crystallization were correlated with the weight of the chalcogen in ThDPP-FP, ThDPP-TP, and ThDPP-SeP, which were evaluated as intermolecular chalcogen-bond interactions between chalcogen and pyrrole nitrogen in chalcogenopheno[3,2-b]pyrroles. A stronger chalcogen bond interaction resulted in stronger self-aggregation in thin films with thermal treatment, which resulted in a polycrystalline structure in chalcogenopheno[3,2-b]pyrrole-containing molecules. For the application in an organic field-effect transistor, all four molecules showed good performance with the highest hole mobilities as 6.33 × 10-3 cm2 V-1 s-1 for ThDPP-TT, 2.08 × 10-2 cm2 V-1 s-1 for ThDPP-FP, 1.87 × 10-2 cm2 V-1 s-1 for ThDPP-TP, and 6.32 × 10-3 cm2 V-1 s-1 for ThDPP-SeP, and the change of mobility is well correlated to the root-mean-square roughness of the thin films. Overall, all the chalcogenopheno[3,2-b]pyrrole-containing molecules showed lower band gaps, polymorphism, and better charge transport properties compared to TT-containing molecules, which motivates replacing TT with chalcogenopheno[3,2-b]pyrroles in conjugated polymers, non-fullerene small molecular acceptors, and narrow-band-gap donors.

Exploration of NIR Squaraine Contrast Agents Containing Various Heterocycles: Synthesis, Optical Properties and Applications

Squaraine dye is a popular class of contrast near-infrared (NIR) dyes. Squaraine dyes have shown the ability to be modified with various heterocycles. The indole moiety is the most notable heterocycle incorporated in squaraine dyes. A tremendous amount of work has gone into developing indole-based squaraine dyes and determining their applications. The optical properties of squaraine dyes containing an indole moiety facilitate high quantum yields and molar absorptivity, but the absorbance maxima is capped near 700 nm. This is the major limitation of indole-based squaraine dyes. In comparison, other heterocycles with larger conjugated systems such as quinoline and perimidine have demonstrated promising optical properties and immense potential for modifications, albeit with limited development. Quinoline- and perimidine-based squaraine dyes have molar extinction coefficients over 100,000 M-1 cm-1 and absorbances over 800 nm. This report will look at indole-, quinoline-, and perimidine-based squaraine dyes. Due to the sheer number of reported dyes, the search for indole-based squaraine dyes has been limited to reports from the past five years (2018-2023). For quinoline- and perimidine-based squaraine dyes, a holistic search was performed to analyze the optical properties and applications, due to the abovementioned limitation. This report will evaluate the three different classes of squaraines: indole-, quinoline-, and perimidine-based, to evaluate their optical properties and applications, with the goal of encouraging the exploration of other heterocycles for use in squaraine dyes.

Building Block Engineering toward Realizing High-Performance Electrochromic Materials and Glucose Biosensing Platform

The molecular engineering of conjugated systems has proven to be an effective method for understanding structure-property relationships toward the advancement of optoelectronic properties and biosensing characteristics. Herein, a series of three thieno[3,4-c]pyrrole-4,6-dione (TPD)-based conjugated monomers, modified with electron-rich selenophene, 3,4-ethylenedioxythiophene (EDOT), or both building blocks (Se-TPD, EDOT-TPD, and EDOT-Se-TPD), were synthesized using Stille cross-coupling and electrochemically polymerized, and their electrochromic properties and applications in a glucose biosensing platform were explored. The influence of structural modification on electrochemical, electronic, optical, and biosensing properties was systematically investigated. The results showed that the cyclic voltammograms of EDOT-containing materials displayed a high charge capacity over a wide range of scan rates representing a quick charge propagation, making them appropriate materials for high-performance supercapacitor devices. UV-Vis studies revealed that EDOT-based materials presented wide-range absorptions, and thus low optical band gaps. These two EDOT-modified materials also exhibited superior optical contrasts and fast switching times, and further displayed multi-color properties in their neutral and fully oxidized states, enabling them to be promising materials for constructing advanced electrochromic devices. In the context of biosensing applications, a selenophene-containing polymer showed markedly lower performance, specifically in signal intensity and stability, which was attributed to the improper localization of biomolecules on the polymer surface. Overall, we demonstrated that relatively small changes in the structure had a significant impact on both optoelectronic and biosensing properties for TPD-based donor-acceptor polymers.

Investigating the Effects of Donors and Alkyne Spacer on the Properties of Donor-Acceptor-Donor Xanthene-Based Dyes

NIR dyes have become popular for many applications, including biosensing and imaging. For this reason, the molecular switch mechanism of the xanthene dyes makes them useful for in vivo detection and imaging of bioanalytes. Our group has been designing NIR xanthene-based dyes by the donor-acceptor-donor approach; however, the equilibrium between their opened and closed forms varies depending on the donors and spacer. We synthesized donor-acceptor-donor NIR xanthene-based dyes with an alkyne spacer via the Sonogashira coupling reaction to investigate the effects of the alkyne spacer and the donors on the maximum absorption wavelength and the molecular switching (ring opening) process of the dyes. We evaluated the strength and nature of the donors and the presence and absence of the alkyne spacer on the properties of the dyes. It was shown that the alkyne spacer extended the conjugation of the dyes, leading to absorption wavelengths of longer values compared with the dyes without the alkyne group. In addition, strong charge transfer donors shifted the absorption wavelength towards the NIR region, while donors with strong π-donation resulted in xanthene dyes with a smaller equilibrium constant. DFT/TDDFT calculations corroborated the experimental data in most of the cases. Dye 2 containing the N,N-dimethylaniline group gave contrary results and is being further investigated.

Acceptor Engineering Produces Ultrafast Nonradiative Decay in NIR-II Aza-BODIPY Nanoparticles for Efficient Osteosarcoma Photothermal Therapy via Concurrent Apoptosis and Pyroptosis

Small-molecule photothermal agents (PTAs) with intense second near-infrared (NIR-II, 1,000 to 1,700 nm) absorption and high photothermal conversion efficiencies (PCEs) are promising candidates for treating deep-seated tumors such as osteosarcoma. To date, the development of small-molecule NIR-II PTAs has largely relied on fabricating donor-acceptor-donor (D-A-D/D') structures and limited success has been achieved. Herein, through acceptor engineering, a donor-acceptor-acceptor (D-A-A')-structured NIR-II aza-boron-dipyrromethene (aza-BODIPY) PTA (SW8) was readily developed for the 1,064-nm laser-mediated phototheranostic treatment of osteosarcoma. Changing the donor groups to acceptor groups produced remarkable red-shifts of absorption maximums from first near-infrared (NIR-I) regions (~808 nm) to NIR-II ones (~1,064 nm) for aza-BODIPYs (SW1 to SW8). Furthermore, SW8 self-assembled into nanoparticles (SW8@NPs) with intense NIR-II absorption and an ultrahigh PCE (75%, 1,064 nm). This ultrahigh PCE primarily originated from an additional nonradiative decay pathway, which showed a 100-fold enhanced decay rate compared to that shown by conventional pathways such as internal conversion and vibrational relaxation. Eventually, SW8@NPs performed highly efficient 1,064-nm laser-mediated NIR-II photothermal therapy of osteosarcoma via concurrent apoptosis and pyroptosis. This work not only illustrates a remote approach for treating deep-seated tumors with high spatiotemporal control but also provides a new strategy for building high-performance small-molecule NIR-II PTAs.

Enhanced sub-1 eV detection in organic photodetectors through tuning polymer energetics and microstructure

One of the key challenges facing organic photodiodes (OPDs) is increasing the detection into the infrared region. Organic semiconductor polymers provide a platform for tuning the bandgap and optoelectronic response to go beyond the traditional 1000-nanometer benchmark. In this work, we present a near-infrared (NIR) polymer with absorption up to 1500 nanometers. The polymer-based OPD delivers a high specific detectivity D^* of 1.03 × 10¹⁰ Jones (-2 volts) at 1200 nanometers and a dark current J_d of just 2.3 × 10^-6 ampere per square centimeter at -2 volts. We demonstrate a strong improvement of all OPD metrics in the NIR region compared to previously reported NIR OPD due to the enhanced crystallinity and optimized energy alignment, which leads to reduced charge recombination. The high D^* value in the 1100-to-1300-nanometer region is particularly promising for biosensing applications. We demonstrate the OPD as a pulse oximeter under NIR illumination, delivering heart rate and blood oxygen saturation readings in real time without signal amplification.

Synthesis of Near-Infrared-Absorbing Anionic Heptamethine Cyanine Dyes with Trifluoromethyl Groups

A novel anionic heptamethine cyanine (HMC) dye with two trifluoromethyl groups that selectively absorb near-infrared light is synthesized. When contrasted with previously studied anionic HMC dyes with substituents such as methyl, phenyl, and pentafluorophenyl groups, the trifluoromethylated dye displays a red-shifted maximum absorption wavelength (for instance, 948 nm in CH₂Cl₂) along with enhanced photostability. Furthermore, HMC dyes with broad absorption in the near-infrared region are synthesized by combining a trifluoromethylated anionic HMC dye with a cationic HMC dye as a counterion.

Enantiopure J-Aggregate of Quaterrylene Bisimides for Strong Chiroptical NIR-Response

Chiral polycyclic aromatic hydrocarbons can be tailored for next-generation photonic materials by carefully designing their molecular as well as supramolecular architectures. Hence, excitonic coupling can boost the chiroptical response in extended aggregates but is still challenging to achieve by pure self-assembly. Whereas most reports on these potential materials cover the UV and visible spectral range, systems in the near infrared (NIR) are underdeveloped. We report a new quaterrylene bisimide derivative with a conformationally stable twisted π-backbone enabled by the sterical congestion of a fourfold bay-arylation. Rendering the π-subplanes accessible by small imide substituents allows for a slip-stacked chiral arrangement by kinetic self-assembly in low polarity solvents. The well dispersed solid-state aggregate reveals a sharp optical signature of strong J-type excitonic coupling in both absorption (897 nm) and emission (912 nm) far in the NIR region and reaches absorption dissymmetry factors up to 1.1 × 10^-2. The structural elucidation was achieved by atomic force microscopy and single-crystal X-ray analysis which we combined to derive a structural model of a fourfold stranded enantiopure superhelix. We could deduce that the role of phenyl substituents is not only granting stable axial chirality but also guiding the chromophore into a chiral supramolecular arrangement needed for strong excitonic chirality.

Thin-Film Morphology and Optical Properties of Photoisomerizable Donor-Acceptor Oligothiophenes

It was recently reported that the most popular electron-accepting units introduced to π-conjugated oligomers studied for organic photovoltaic applications are susceptible to unwanted and even destructive photochemical reactions. The consequences of Z/E photoisomerization of the popular 2-(1,1-dicyanomethylene)rhodanine (RCN) unit on the optical and morphological properties of a homologous series of RCN-functionalized oligothiophenes are studied here. Oligomers consisting of one, two, or three thiophene units were studied as pure Z isomers and with E isomer compositions of 25, 53, and 45%, respectively, for Z/E mixtures. Solutions of Z isomers and Z/E mixtures were characterized by UV-vis and photoluminescence spectroscopy, wherein changes to optical properties were evaluated on the basis of E isomer content. X-ray diffraction of thin-film Z/E mixtures reveals crystalline domains of both Z and E forms after thermal annealing for mono- and bithiophene oligomers, with greater interplanar spacing for E crystalline domains than the Z counterparts along the substrate normal direction. The surface morphology viewed by atomic force microscopy also shows fiberlike structures for the E form with a much larger aspect ratio than for the Z domains in the bithiophene oligomer. Optical characterization reveals drastic changes in the solid state upon introduction of the E form for the mono- and bithiophene derivatives, whereas subtle consequences are noted for the terthiophene analogue. Most notably, a 132 nm redshift in maximum absorption occurs for the bithiophene oligomer films containing 53% E isomer compared to the pure Z counterpart. Finally, although solid-state photoisomerization experiments find no evidence of Z → E isomerization in polycrystalline Z films, E → Z isomerization is observed and becomes more restrictive in films with higher crystallinity (i.e., after thermal annealing). This structure-property study, which elucidates the consequences of the RCN configuration on solid-state packing and optical properties, is expected to guide the development of more efficient and stable organic optoelectronic devices.

Resonance-Enhanced Emission Effects toward Dual-State Emissive Bright Red and Near-Infrared Emitters

Resonance-enhanced emission (REE) effect was discovered and lead to a novel dye family of hydrostyryl pyridinium derivatives in our recent work. Herein, the REE effect was employed to design a red and near-infrared dual-state emissive fluorophore family of SW-OH-NO₂ derivatives which were easily synthesized by coupling an electron-withdrawing group (W) onto nitro(hydroxyl)styryl (S-OH-NO₂ ) through a C=C double bond as π-bridge. The deprotonation of a phenolic hydroxyl group promoted by a nitro group and the electron-withdrawing group (W) on the other side of the π-bridge triggered resonance, resulting in significantly red-shifted emission. All the resultant SW-OH-NO₂ compounds showed excellent dual-state emission behavior. Remarkably, hydrostyryl quinolinium (SQ-OH-NO₂ ) is one of the smallest NIR emitter molecular skeleton (λ_em =725 nm, MW<400) and showed dual-state emission characteristics and obvious viscosity-depended fluorescent behaviors. In addition to constructing electron donor-acceptor structures and prolonging π-bridges, the REE effect promises a reliable strategy toward novel fluorophores with small size, long emissive wavelength, and dual-emission characteristics, and importantly, feasible industrial manufactures and applications due to their easy and low-cost synthesis strategy.

Sensitive photodetection below silicon bandgap using quinoid-capped organic semiconductors

High-sensitivity organic photodetectors (OPDs) with strong near-infrared (NIR) photoresponse have attracted enormous attention due to potential applications in emerging technologies. However, few organic semiconductors have been reported with photoelectric response beyond ~1.1 μm, the detection limit of silicon detectors. Here, we extend the absorption of organic small-molecule semiconductors to below silicon bandgap, and even to 0.77 eV, through introducing the newly designed quinoid-terminals with high Mulliken-electronegativity (5.62 eV). The fabricated photodiode-type NIR OPDs exhibit detectivity (D^*) over 10¹² Jones in 0.41 to 1.2 μm under zero bias with a maximum of 2.9 × 10¹² Jones at 1.02 μm, which is the highest D^* for reported OPDs in photovoltaic-mode with response spectra beyond 1.1 μm. The high D^* in 0.9 to 1.2 μm is comparable to those of commercial InGaAs photodetectors, despite the detection limit of our OPDs is shorter than InGaAs (~1.7 μm). A spectrometer prototype with a wide measurable region (0.4 to 1.25 μm) and NIR imaging under 1.2-μm illumination are demonstrated successfully in OPDs.

Palladium-Catalyzed C2-Selective Oxidative Olefination of Benzo[b]thiophene 1,1-Dioxides with Styrenes and Acrylates

Here, we disclose a novel Pd(II)-catalyzed oxidative Heck reaction of benzo[b]thiophene 1,1-dioxides with styrenes and acrylates. This transformation features broad functional group tolerance and high C2 selectivity. Furthermore, the photoluminescence properties of C-2 alkenylated products have been characterized, which illustrates the potential usefulness of our protocol in constructing π-conjugated fluorescent molecules.

Accurate prediction of 11B NMR chemical shift of BODIPYs via machine learning

In this article, we present the results of developing a model based on an RFR machine learning method using the ISIDA fragment descriptors for predicting the ¹¹B NMR chemical shift of BODIPYs. The model is freely available at https://ochem.eu/article/146458. The model demonstrates the high quality of predicting the ¹¹B NMR chemical shift (RMSE, 5CV (FINALE training set) = 0.40 ppm, RMSE (TEST set) = 0.14 ppm). In addition, we compared the "cost" and the user-friendliness for calculations using the quantum-chemical model with the DFT/GIAO approach. The ¹¹B NMR chemical shift prediction accuracy (RMSE) of the model considered is more than three times higher and tremendously faster than the DFT/GIAO calculations. As a result, we provide a convenient tool and database that we collected for all researchers, that allows them to predict the ¹¹B NMR chemical shift of boron-containing dyes. We believe that the new model will make it easier for researchers to correctly interpret the ¹¹B NMR chemical shifts experimentally determined and to select more optimal conditions to perform an NMR experiment.

Intramolecular charge transfer effect for highly efficient deep red and near infrared thermally activated delayed fluorescence

Thermally activated delayed fluorescence (TADF) materials with emission in the deep red and near infrared (DR/NIR) region are underresearched due to the limited choice of strong donor/acceptor units. The current mainstream strategy for the design of DR/NIR TADFs is to increase the acceptor strength via the introduction of multiple sub-acceptor units, thereby narrowing the bandgap. In this work, the intramolecular charge transfer (ICT) effect was applied for the development of acceptor units to achieve efficient DR/NIR TADFs. The ICT effect within the acceptor unit enhanced the π-electron delocalization, lowered the LUMO and redshifted the emission wavelength. In addition, the fusion of the donor unit into the planar acceptor skeleton rigidified the molecular structure and reduced the non-radiative decay. This proof-of-concept study demonstrated that ICT is an undoubtedly effective strategy for the rational design of efficient DR/NIR TADFs.

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells

Reducing the energy loss of sub-cells is critical for high performance tandem organic solar cells, while it is limited by the severe non-radiative voltage loss via the formation of non-emissive triplet excitons. Herein, we develop an ultra-narrow bandgap acceptor BTPSeV-4F through replacement of terminal thiophene by selenophene in the central fused ring of BTPSV-4F, for constructing efficient tandem organic solar cells. The selenophene substitution further decrease the optical bandgap of BTPSV-4F to 1.17 eV and suppress the formation of triplet exciton in the BTPSV-4F-based devices. The organic solar cells with BTPSeV-4F as acceptor demonstrate a higher power conversion efficiency of 14.2% with a record high short-circuit current density of 30.1 mA cm^-2 and low energy loss of 0.55 eV benefitted from the low non-radiative energy loss due to the suppression of triplet exciton formation. We also develop a high-performance medium bandgap acceptor O1-Br for front cells. By integrating the PM6:O1-Br based front cells with the PTB7-Th:BTPSeV-4F based rear cells, the tandem organic solar cell demonstrates a power conversion efficiency of 19%. The results indicate that the suppression of triplet excitons formation in the near-infrared-absorbing acceptor by molecular design is an effective way to improve the photovoltaic performance of the tandem organic solar cells.

Ultra-Narrowband Near-Infrared Responsive J-Aggregates of Fused Quinoidal Tetracyanoindacenodithiophene

Narrowband photoresponsive molecules are highly coveted in high-resolution imaging, sensing, and monochromatic photodetection, especially those extending into the near-infrared (NIR) spectral range. Here, a new class of J-aggregating materials based on quinoidal indacenodithiophenes (IDTs) that exhibit an ultra-narrowband (full width half maxima of 22 nm) NIR absorption peak centered at 770 nm is reported. The spectral width is readily tuned by the length of the solubilizing alkyl group, with longer chains resulting in significant spectral narrowing. The J-aggregate behavior is confirmed by a combination of excited state lifetime measurements and single-crystal X-ray diffraction measurements. Their utility as electron-transporting materials is demonstrated in both transistor and phototransistor devices, with the latter demonstrating good response at NIR wavelengths (780 nm) over a range of intensities.

Enhancement of NIR-Absorbing Ability of Bis(diarylmethylium)-Type Dicationic Dyes Based on an Ortho-Substitution Strategy

Electrochromic systems capable of switching near-infrared (NIR) absorption are fascinating from the viewpoint of applications in the materials and life sciences. Although 11,11,12,12-tetraaryl-9,10-anthraquinodimethanes (AQDs) with a folded form undergo one-stage two-electron oxidation to produce twisted dicationic dyes exhibiting NIR absorption, there is a need to establish a design strategy that can enhance the NIR-absorbing abilities of the corresponding dicationic dyes. In this study, we designed and synthesized a series of AQD derivatives with various substituents introduced at the ortho-position(s) of the 4-methoxyphenyl group. X-ray and spectroscopic analyses revealed that NIR-absorbing properties can be changed by introduction of the ortho-substituents. Thus, control of the steric and electronic effects of the ortho-substituents on the 4-methoxyphenyl groups was demonstrated to be an effective strategy for fine-tuning of the HOMO and LUMO levels for neutral AQDs and twisted dications, respectively, resulting in the modification of electrochemical and spectroscopic properties under an "ortho-substitution strategy".

Fluorination Enhances NIR-II Emission and Photothermal Conversion Efficiency of Phototheranostic Agents for Imaging-Guided Cancer Therapy

Phototheranostics with second near-infrared (NIR-II) imaging and photothermal effect have become a burgeoning biotechnology for tumor diagnosis and precise treatment. As important parameters of phototheranostic agents (PTAs), fluorescence quantum yield (QY) and photothermal conversion efficiency (PCE) are usually considered as a pair of contradictions that is difficult to be simultaneously enhanced. Herein, a fluorination strategy for designing A-D-A type PTAs with synchronously improved QY and PCE is proposed. Experimental results show that the molar extinction coefficient (ε), NIR-II QY, and PCE of all fluorinated PTAs nanoparticles (NPs) are definitely improved compared with the chlorinated counterparts. Theoretical calculation results demonstrate that fluorination can maximize the electrostatic potential difference by virtue of the high electronegativity of fluorine, which may increase intra/intermolecular D-A interactions, tighten molecule packing, and further promote the increase of ε, ultimately leading to simultaneously enhanced QY and PCE. In these PTA NPs, FY6-NPs display NIR-II emission extended to 1400 nm with the highest NIR-II QY (4.2%) and PCE (80%). These features make FY6-NPs perform well in high-resolution imaging of vasculature and NIR-II imaging-guided photothermal therapy (PTT) of tumors. This study develops a valuable guideline for constructing NIR-II organic PTAs with high performance.

Simple Solvent Treatment Enabled Improved PEDOT:PSS Performance toward Highly Efficient Binary Organic Solar Cells

PSS is the most popular hole-transporting material (HTM) for conventional structural organic solar cell (OSC) devices, whose performance is of great importance for realizing high power conversion efficiency (PCE). However, its performance in OSC devices has been continuously challenged by various replacing materials and different doping strategies, for better conductivity, work function, and surface property. Here, we report a simple dopant-free method to tune the phase separation of the PEDOT:PSS layer, which results in better charge transport and extraction in devices. Specifically, high PCEs for binary polymer-small-molecule (>18%) and polymer-polymer (>17%) systems are simultaneously achieved. This work engineeringly provides encouraging improvement for OSC device performance with easy modification and scientifically offers insights into tuning the property of the PEDOT:PSS layer.

Balancing the Selective Absorption and Photon-to-Electron Conversion for Semitransparent Organic Photovoltaics with 5.0% Light-Utilization Efficiency

Efficiently converting invisible light while allowing full visible light transmission is key to achieving high-performance semitransparent organic photovoltaics (ST-OPVs). Here, a detailed balance strategy is explored to optimize the ST-OPV via taking both absorption and carrier dynamics into consideration. Based on this principle, comprehensive optimizations are carried out, including a ternary strategy, donor:acceptor blend ratio, thickness, antireflection, etc., to compromise the invisible energy conversion and visible transmission for high-performance ST-OPVs. As a result, the opaque OPV device exhibits a champion power conversion efficiency of 19.35% (certificated 19.07%), and most strikingly, the best ST-OPV shows a remarkably high light-utilization efficiency of 5.0%, where the efficiency and the average visible transmission are 12.95% and 38.67%, respectively. An efficiency of 12.09% is achieved on the upscaled device with an area of 1.05 cm² , demonstrating its promise for large-area fabrication. These results are among the best values for ST-OPVs. Besides, it is demonstrated that the ST-OPV exhibits good infrared light-reflection capability for thermal control. This work provides a rational design of balancing the absorbing selectivity and photon-to-electron conversion for high-performance ST-OPVs, and may pave the way toward the practical application of solar windows.

Optical Control of Tissue Regeneration through Photostimulation of Organic Semiconducting Nanoparticles

Next generation bioengineering strives to identify crucial cues that trigger regeneration of damaged tissues, and to control the cells that execute these programs with biomaterials and devices. Molecular and biophysical mechanisms driving embryogenesis may inspire novel tools to reactivate developmental programs in situ. Here nanoparticles based on conjugated polymers are employed for optical control of regenerating tissues by using an animal with unlimited regenerative potential, the polyp Hydra, as in vivo model, and human keratinocytes as an in vitro model to investigate skin repair. By integrating animal, cellular, molecular, and biochemical approaches, nanoparticles based on poly-3-hexylthiophene (P3HT) are shown able to enhance regeneration kinetics, stem cell proliferation, and biomolecule oxidation levels. Opposite outputs are obtained with PCPDTBT-NPs (Poly[2,6-(4,4-bis-(2-ethylhexyl)-4H-cyclopenta [2,1-b;3,4-b'] dithiophene)-alt-4,7(2,1,3-benzothiadiazole)], causing a beneficial effect on Hydra regeneration but not on the migratory capability of keratinocytes. These results suggest that the artificial modulation of the redox potential in injured tissues may represent a powerful modality to control their regenerative potential. Importantly, the possibility to fine-tuning materials' photocatalytic efficiency may enable a biphasic modulation over a wide dynamic range, which can be exploited to augment the tissue regenerative capacity or inhibit the unlimited potential of cancerous cells in pathological contexts.

Tuning the Properties of Donor-Acceptor and Acceptor-Donor-Acceptor Boron Difluoride Hydrazones via Extended π-Conjugation

Molecular materials with π-conjugated donor-acceptor (D-A) and acceptor-donor-acceptor (A-D-A) electronic structures have received significant attention due to their usage in organic photovoltaic materials, in organic light-emitting diodes, and as biological imaging agents. Boron-containing molecular materials have been explored as electron-accepting units in compounds with D-A and A-D-A properties as they often exhibit unique and tunable optoelectronic and redox properties. Here, we utilize Stille cross-coupling chemistry to prepare a series of compounds with boron difluoride hydrazones (BODIHYs) as acceptors and benzene, thiophene, or 9,9-dihexylfluorene as donors. BODIHYs with D-A and A-D-A properties exhibited multiple reversible redox waves, solid-state emission with photoluminescence quantum yields up to 10%, and aggregation-induced emission (AIE). Optical band gaps (or highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) gaps) determined for these compounds (2.02-2.25 eV) agree well with those determined from cyclic voltammetry experiments (2.05-2.42 eV). The optoelectronic properties described herein are rationalized with density functional theory calculations that support the interpretation of the experimental findings. This work provides a foundation of understanding that will allow for the consideration of D-A and A-D-A BODIHYs to be incorporated into applications (e.g., organic electronics) where fine-tuning of band gaps is required.

Achieving and Understanding of Highly Efficient Ternary Organic Photovoltaics: From Morphology and Energy Loss to Working Mechanism

Ternary strategy, adding an additional donor (D) or acceptor (A) into conventional binary D:A blend, has shown great potential in improving photovoltaic performances of organic photovoltaics (OPVs) for practical applications. Herein, this review is presented on how efficient ternary OPVs are realized from the aspects of morphology, energy loss, and working mechanism. As to morphology, the role of third component on the formation of preferred alloy-like-phase and vertical-phase, which are driven by the miscibility tuning, is discussed. For energy loss, the effect of the third component on the luminescence enhancement and energetic disordering suppression, which lead to favorable increase of voltage, is presented. Regarding working mechanism, dilution effect and relationships between two acceptors or donor/acceptor, which explain the observed device parameters variations, are analyzed. Finally, some future directions concerning ternary OPVs are pointed out. Therefore, this review can provide a comprehensive understanding of working principles and effective routes for high-efficiency ternary systems, advancing the commercialization of OPVs.

Perylene Diimide-Fused Dithiophenepyrroles with Different End Groups as Acceptors for Organic Photovoltaics

In this study, we synthesized four new A-DA'D-A acceptors (where A and D represent acceptor and donor chemical units) incorporating perylene diimide units (A') as their core structures and presenting various modes of halogenation and substitution of the functional groups at their end groups (A). In these acceptors, by fusing dithiophenepyrrole (DTP) moieties (D) to the helical perylene diimide dimer (hPDI) to form fused-hPDI (FhPDI) cores, we could increase the D/A' oscillator strength in the cores and, thus, the intensity of intramolecular charge transfer (ICT), thereby enhancing the intensity of the absorption bands. With four different end group units─IC2F, IC2Cl, IO2F, and IO2Cl─tested, each of these acceptor molecules exhibited different optical characteristics. Among all of these systems, the organic photovoltaic device incorporating the polymer PCE10 blended with the acceptor FhPDI-IC2F (1:1.1 wt %) had the highest power conversion efficiency (PCE) of 9.0%; the optimal PCEs of PCE10:FhPDI-IO2F, PCE10:FhPDI-IO2Cl, and PCE10:FhPDI-IC2Cl (1:1.1 wt %) devices were 5.2, 4.7, and 7.7%, respectively. The relatively high PCE of the PCE10:FhPDI-IC2F device resulted primarily from the higher absorption coefficients of the FhPDI-IC2F acceptor, lower energy loss, and more efficient charge transfer; the FhPDI-IC2F system experienced a lower degree of geminate recombination─as a result of improved delocalization of π-electrons along the acceptor unit─relative to that of the other three acceptors systems. Thus, altering the end groups of multichromophoric PDI units can increase the PCEs of devices incorporating PDI-derived materials and might also be a new pathway for the creation of other valuable fused-ring derivatives.

Fluorinated Perylene-Diimides: Cathode Interlayers Facilitating Carrier Collection for High-Performance Organic Solar Cells

Organic solar cells (OSCs) have experienced rapid progress with the innovation of near-infrared (NIR)-absorbing small-molecular acceptors (SMAs), while the unique electronic properties of the SMAs raise new challenges in relation to cathode engineering for effective electron collection. To address this issue, two fluorinated perylene-diimides (PDIs), PDINN-F and PDINN-2F, are synthesized by a simple fluorination method, for application as cathode interlayer (CIL) materials. The two bay-fluorinated PDI-based CILs possess a lower lowest unoccupied molecular orbital (LUMO) energy level of ≈-4.0 eV, which improves the energy level alignment at the NIR-SMAs (such as BTP-eC9)/CIL for a favorable electron extraction efficiency. The monofluorinated PDINN-F shows higher electron mobility and better improved interfacial compatibility. The PDINN-F-based OSCs with PM6:BTP-eC9 as active layer exhibit an enhanced fill factor and larger short-circuit current density, leading to a high power conversion efficiency (PCE) exceeding 18%. The devices with PDINN-F CIL retain more than 80% of their initial PCE after operating at the maximum power point under continuous illumination for 750 h. This work prescribes a facile, cost-effective, and scalable method for the preparation of stable, high-performance fluorinated CILs, and instilling promise for the NIR-SMAs-based OSCs moving forward.

Conjugated polymers based on metalla-aromatic building blocks

Conjugated polymers usually require strategies to expand the range of wavelengths absorbed and increase solubility. Developing effective strategies to enhance both properties remains challenging. Herein, we report syntheses of conjugated polymers based on a family of metalla-aromatic building blocks via a polymerization method involving consecutive carbyne shuttling processes. The involvement of metal d orbitals in aromatic systems efficiently reduces band gaps and enriches the electron transition pathways of the chromogenic repeat unit. These enable metalla-aromatic conjugated polymers to exhibit broad and strong ultraviolet–visible (UV–Vis) absorption bands. Bulky ligands on the metal suppress π–π stacking of polymer chains and thus increase solubility. These conjugated polymers show robust stability toward light, heat, water, and air. Kinetic studies using NMR experiments and UV–Vis spectroscopy, coupled with the isolation of well-defined model oligomers, revealed the polymerization mechanism.

Efficient Optoelectronic Devices Enabled by Near-Infrared Organic Semiconductors with a Photoresponse beyond 1050 nm

Organic optoelectronic devices exhibit distinctive photoresponse to the near-infrared (NIR) light and show great potential in many fields. However, the optoelectronic properties of the existing devices hardly meet the technical requirements of new applications such as energy conversion and health sensing, thus raising the demand to develop high-performance NIR organic semiconductors. To address this issue, a new NIR material, namely, BFIC, is designed and synthesized by inserting fluorothieno[3,4-b]thiophene (FTT) as a π-bridge. Since the introduction of FTT can extend the conjugation, stabilize the quinoid resonant structure, and enhance the intramolecular charge transfer, BFIC displays a broad and intense absorption in the NIR region, ranging from 700 to 1050 nm. As a result, the organic solar cell based on BFIC and a polymer donor PTB7-Th realizes a power conversion efficiency of 10.38%. The semitransparent organic solar cell (OSC) shows a power conversion efficiency of 6.15%, accompanied by an average visible transmittance of 38.79% due to the selective photoresponse in the NIR range. The organic photodetector based on PTB7-Th:BFIC delivers a broad spectral response ranging from 330 to 1030 nm with a specific detectivity over 10¹³ Jones under the self-powered mode, which is one of the highest detectivities among the broad-band organic photodetectors.

Monitoring Time-Non-Stable Surfaces Using Mobile NIR DLP Spectroscopy

In recent years, Near Infrared (NIR) spectroscopy has increased in popularity and usage for different purposes, including the detection of particular substances, evaluation of food quality, etc. Usually, mobile handheld NIR spectroscopy devices are used on the surfaces of different materials, very often organic ones. The features of these materials change as they age, leading to changes in their spectra. The ageing process often occurs only slowly, i.e., corresponding reflection spectra can be analyzed each hour or at an even longer interval. This paper undertakes the problem of analyzing surfaces of non-stable, rapidly changing materials such as waxes or adhesive materials. To obtain their characteristic spectra, NIR spectroscopy using a Digital Light Projection (DLP) spectrometer was used. Based on earlier experiences and the current state of the art, Artificial Neural Networks (ANNs) were used to process spectral sequences to proceed with an enormous value of spectra gathered during measurements.