Mixed Ionic-Electronic Conduction, a Multifunctional Property in Organic Conductors

Tuning direct-written terahertz metadevices with organic mixed ion-electron conductors

In the past decade, organic mixed ion-electron conductors have been successfully adopted in innovative bioelectronic, neuromorphic, and electro-optical technologies, as well as in multiple energy harvesting and printed electronics applications. However, despite the intense research efforts devoted to these materials, organic mixed conductors have not yet found application in electronic/photonic devices operating in key regions of the electromagnetic spectrum, such as the microwave (>5 GHz) and terahertz (0.1-10 THz) ranges. A possible reason for this technological gap is the widespread notion that organic electronic materials are unsuitable for high-frequency applications. In this work, we demonstrate for the first time the utility of high-performance polymer mixed conductors as electro-active tuning layers in reconfigurable terahertz metasurfaces, achieving modulation performances comparable with state-of-the-art inorganic and 2D semiconductors. Through time-domain terahertz spectroscopy, we show that the large conductivity modulations of these polymers, until now probed only at very low frequencies, are effectively preserved in the terahertz range, leading to optimal metadevice reconfigurability. Finally, we leverage the unique processability of organic materials to develop fully direct-written electrically tuneable metasurfaces onto both rigid and flexible substrates, opening new opportunities for the mass-scale realization of flexible and light-weight terahertz optics with unique mechanical characteristics and environmental footprint.

Molecular Ordering Manipulation in Fused Oligomeric Mixed Conductors for High-Performance n-Type Organic Electrochemical Transistors

Advanced n-type organic electrochemical transistors (OECTs) play an important part in bioelectronics, facilitating the booming of complementary circuits-based biosensors. This necessitates the utilization of both n-type and p-type organic mixed ionic-electronic conductors (OMIECs) exhibiting a balanced performance. However, the observed subpar electron charge transport ability in most n-type OMIECs presents a significant challenge to the overall functionality of the circuits. In response to this issue, we achieve high-performance OMIECs by leveraging a series of fused electron-deficient monodisperse oligomers with mixed alkyl and glycol chains. Through molecular ordering manipulation by optimizing of their alkyl side chains, we attained a record-breaking OECT electron mobility of 0.62 cm2/(V s) and μC* of 63.2 F/(cm V s) for bgTNR-3DT with symmetrical alkyl chains. Notably, the bgTNR-3DT film also exhibits the highest structural ordering, smallest energetic disorder, and the lowest trap density among the series, potentially explaining its ideal charge transport property. Additionally, we demonstrate an organic inverter incorporating bgTNR-3DT OECTs with a gain above 30, showcasing the material's potential for constructing organic circuits. Our findings underscore the indispensable role of alkyl chain optimization in the evolution of prospective high performance OMIECs for constructing advanced organic complementary circuits.

Tuning the Electronic Properties of Bridged Dithienyl-, Difuryl-, Dipyrrolyl-Vinylene as Precursors of Small-Bandgap Conjugated Polymer

Optoelectronic properties of linear π-conjugated polymers/oligomers are of great importance for the fabrication of organic photonic and electronic devices. To this end, the π-conjugated polymers/oligomers need to meet both optoelectronic and key structural properties in order to fulfill their implementation as active components. In particular, they need to possess low bandgap and high thermal, conformational, and photochemical stabilities. So far, several strategies have been developed to attain such requirements including the covalent and non-covalent rigidification concepts of the π-conjugated systems. On the basis of these findings, we describe herein the theoretical studies of novel series of covalently bridged derivatives demonstrating the benefits of the strategy. Comparison of these derivatives with compounds previously described in the literature highlights enhanced optoelectronic properties and behaviors that would be beneficial for the construction and development of new linear π-conjugated polymers.

Patterns of electrical properties change of heavy metal-organic compound contaminated media in soil-groundwater systems: From laboratory experiments to site application

Differences in electrical properties of media are the basis for determining the type and extent of contamination using geophysical methods. However, differences in heavy metals and organic matter complicate the electrical properties of compound-contaminated media, and existing geophysical methods cannot independently identify compound contamination. Therefore, this study proposes a geophysical detection system that combines electrical resistance tomography (ERT) and induced polarization methods and establishes a solid theory as the basis for the system application through laboratory experiments, model analysis, and site applications. The study reveals that as the organics volume proportion increases, the resistivity and normalized chargeability of contaminated media increased slowly, followed by a rapid increase, and finally reached a stable state. The specific type of compound significantly influences the electrical properties, while the resistivity of different kinds of compound-contaminated media reaches the same maximum value as the organics volume proportion increases. The medium type determines the contaminated media's lower resistivity limit and upper normalized chargeability limit. Additionally, the interplay between heavy metal type, content, and medium complicates the electrical properties of the media, with the compound type exerting a significant impact on resistivity. Archie's law and random forest modeling reveal that the inflection point for resistivity change occurs at 40 % and 80 % organics volume proportions, while the inflection point for normalized chargeability change occurs at 30 % and 70 % organics volume proportions in compound-contaminated media. These inflection points depend on the types of compounds, compositions, proportions, and media, and their importance for the electrical properties of the media changes with the increasing organics volume proportion. Based on the changing patterns of resistivity and normalized chargeability in heavy metal-organic compound contaminated media, the modified geophysical detection system can effectively identify the pollution type and intensity, which provides accurate pollution information to develop effective treatment strategies.

A nonconjugated radical polymer enables bimodal memory and in-sensor computing operation

This study reports intrinsic multimodal memristivity of a nonconjugated radical polymer with ambient stability. Organic memristive devices represent powerful candidates for biorealistic data storage and processing. However, there exists a substantial knowledge gap in realizing the synthetic biorealistic systems capable of effectively emulating the cooperative and multimodal activation processes in biological systems. In addition, conventional organic memristive materials are centered on conjugated small and macromolecules, making them synthetically challenging or difficult to process. In this work, we first describe the intrinsic resistive switching of the radical polymer that resulted in an exceptional state retention of >105 s and on/off ratio of >106. Next, we demonstrate its bimodal cooperative switching, in response to the proton accumulation as a biological input. Last, we expand our system toward an advanced in-sensor computing system. Our research demonstrates a nonconjugated radical polymer with intrinsic memristivity, which is directly applicable to future electronics including data storage, neuromorphics, and in-sensor computing.

Organic Mixed Ionic-Electronic Conductors for Bioelectronic Sensors: Materials and Operation Mechanisms

The field of organic mixed ionic-electronic conductors (OMIECs) has gained significant attention due to their ability to transport both electrons and ions, making them promising candidates for various applications. Initially focused on inorganic materials, the exploration of mixed conduction has expanded to organic materials, especially polymers, owing to their advantages such as solution processability, flexibility, and property tunability. OMIECs, particularly in the form of polymers, possess both electronic and ionic transport functionalities. This review provides an overview of OMIECs in various aspects covering mechanisms of charge transport including electronic transport, ionic transport, and ionic-electronic coupling, as well as conducting/semiconducting conjugated polymers and their applications in organic bioelectronics, including (multi)sensors, neuromorphic devices, and electrochromic devices. OMIECs show promise in organic bioelectronics due to their compatibility with biological systems and the ability to modulate electronic conduction and ionic transport, resembling the principles of biological systems. Organic electrochemical transistors (OECTs) based on OMIECs offer significant potential for bioelectronic applications, responding to external stimuli through modulation of ionic transport. An in-depth review of recent research achievements in organic bioelectronic applications using OMIECs, categorized based on physical and chemical stimuli as well as neuromorphic devices and circuit applications, is presented.

Observing Proton-Electron Mixed Conductivity in Graphdiyne

Mixed conducting materials with both ionic and electronic conductivities have gained prominence in emerging applications. However, exploring material with on-demand ionic and electronic conductivities remains challenging, primarily due to the lack of correlating macroscopic conductivity with atom-scale structure. Here, the correlation of proton-electron conductivity and atom-scale structure in graphdiyne is explored. Precisely adjusting the conjugated diynes and oxygenic functional groups in graphdiyne yields a tunable proton-electron conductivity on the order of 103. In addition, a wet-chemistry lithography technique for uniform preparation of graphdiyne on flexible substrates is provided. Utilizing the proton-electron conductivity and mechanical tolerance of graphdiyne, bimodal flexible devices serving as capacitive switches and resistive sensors are created. As a proof-of-concept, a breath-machine interface for sentence-based communication and self-nursing tasks with an accuracy of 98% is designed. This work represents an important step toward understanding the atom-scale structure-conductivity relationship and extending the applications of mixed conducting materials to assistive technology.

Coin-sized, fully integrated, and minimally invasive continuous glucose monitoring system based on organic electrochemical transistors

Continuous glucose monitoring systems (CGMs) are critical toward closed-loop diabetes management. The field's progress urges next-generation CGMs with enhanced antinoise ability, reliability, and wearability. Here, we propose a coin-sized, fully integrated, and wearable CGM, achieved by holistically synergizing state-of-the-art interdisciplinary technologies of biosensors, minimally invasive tools, and hydrogels. The proposed CGM consists of three major parts: (i) an emerging biochemical signal amplifier, the organic electrochemical transistor (OECT), improving the signal-to-noise ratio (SNR) beyond traditional electrochemical sensors; (ii) a microneedle array to facilitate subcutaneous glucose sampling with minimized pain; and (iii) a soft hydrogel to stabilize the skin-device interface. Compared to conventional CGMs, the OECT-CGM offers a high antinoise ability, tunable sensitivity and resolution, and comfort wearability, enabling personalized glucose sensing for future precision diabetes health care. Last, we discuss how OECT technology can help push the limit of detection of current wearable electrochemical biosensors, especially when operating in complicated conditions.

Spiers Memorial Lecture: Challenges and prospects in organic photonics and electronics

While a substantial amount of research activity has been conducted in fields related to organic photonics and electronics, including the development of devices such as organic field-effect transistors, organic photovoltaics, and organic light-emitting diodes for applications encompassing organic thermoelectrics, organic batteries, excitonic organic materials for photochemical and optoelectronic applications, and organic thermoelectrics, this perspective review will primarily concentrate on the emerging and rapidly expanding domain of organic bioelectronics and neuromorphics. Here we present the most recent research findings on organic transistors capable of sensing biological biomarkers down at the single-molecule level (i.e., oncoproteins, genomes, etc.) for the early diagnosis of pathological states and to mimic biological synapses, paving the way to neuromorphic applications that surpass the limitations of the traditional von Neumann computing architecture. Both organic bioelectronics and neuromorphics exhibit several challenges but will revolutionize human life, considering the development of artificial synapses to counteract neurodegenerative disorders and the development of ultrasensitive biosensors for the early diagnosis of cancer to prevent its development. Moreover, organic bioelectronics for sensing applications have also triggered the development of several wearable, flexible and stretchable biodevices for continuous biomarker monitoring.

Mixing Insulating Commodity Polymers with Semiconducting n-type Polymers Enables High-Performance Electrochemical Transistors

Diluting organic semiconductors with a host insulating polymer is used to increase the electronic mobility in organic electronic devices, such as thin film transistors, while considerably reducing material costs. In contrast to organic electronics, bioelectronic devices such as the organic electrochemical transistor (OECT) rely on both electronic and ionic mobility for efficient operation, making it challenging to integrate hydrophobic polymers as the predominant blend component. This work shows that diluting the n-type conjugated polymer p(N-T) with high molecular weight polystyrene (10 KDa) leads to OECTs with over three times better mobility-volumetric capacitance product (µC*) with respect to the pristine p(N-T) (from 4.3 to 13.4 F V-1 cm-1 s-1 ) while drastically decreasing the amount of conjugated polymer (six times less). This improvement in µC* is due to a dramatic increase in electronic mobility by two orders of magnitude, from 0.059 to 1.3 cm2 V-1 s-1 for p(N-T):Polystyrene 10 KDa 1:6. Moreover, devices made with this polymer blend show better stability, retaining 77% of the initial drain current after 60 minutes operation in contrast to 12% for pristine p(N-T). These results open a new generation of low-cost organic mixed ionic-electronic conductors where the bulk of the film is made by a commodity polymer.

Conjugated Polyelectrolyte Thin Films for Pseudocapacitive Applications

A subclass of organic semiconductors known as conjugated polyelectrolytes (CPEs) is characterized by a conjugated backbone with ionic pendant groups. The water solubility of CPEs typically hinders applications of thin films in aqueous media. Herein, it is reported that films of an anionic CPE, namely CPE-K, drop cast from water produces single-component solid-state pseudocapacitive electrodes that are insoluble in aqueous electrolyte. That X-ray diffraction experiments reveal a more structurally ordered film, relative to the as-obtained powder from chemical synthesis, and dynamic light scattering measurements show an increase in aggregate particle size with increasing [KCl] indicate that CPE-K films are insoluble because of tight interchain contacts and electrostatic screening by the electrolyte. CPE-K film electrodes can maintain 85% of their original capacitance (84 F g-1 ) at 500 A g-1 and exhibit excellent cycling stability, where a capacitance retention of 93% after 100 000 cycles at a current density of 35 A g-1 . These findings demonstrate that it is possible to use initially water soluble ionic-organic materials in aqueous electrolytes, by increasing the electrolyte concentration. This strategy can be applied to the application of conjugated polyelectrolytes in batteries, organic electrochemical transistors, and electrochemical sensors, where fast electron and ion transport are required.

Polymer-Based Thermally Stable Chemiresistive Sensor for Real-Time Monitoring of NO2 Gas Emission

We present a thermally stable, mechanically compliant, and sensitive polymer-based NO2 gas sensor design. Interconnected nanoscale morphology driven from spinodal decomposition between conjugated polymers tethered with polar side chains and thermally stable matrix polymers offers judicious design of NO2-sensitive and thermally tolerant thin films. The resulting chemiresitive sensors exhibit stable NO2 sensing even at 170 °C over 6 h. Controlling the density of polar side chains along conjugated polymer backbone enables optimal design for coupling high NO2 sensitivity, selectivity, and thermal stability of polymer sensors. Lastly, thermally stable films are used to implement chemiresistive sensors onto flexible and heat-resistant substrates and demonstrate a reliable gas sensing response even after 500 bending cycles at 170 °C. Such unprecedented sensor performance as well as environmental stability are promising for real-time monitoring of gas emission from vehicles and industrial chemical processes.

Tunable control of the performance of aqueous-based electrochemical devices by post-polymerization functionalization

Functionalized polymeric mixed ionic-electronic conductors (PMIECs) are highly desired for the development of electrochemical applications, yet are hindered by the limited conventional synthesis techniques. Here, we propose a "graft-onto-polymer" synthesis strategy by post-polymerization functionalization (GOP-PPF) to prepare a family of PMIECs sharing the same backbone while functionalized with varying ethylene glycol (EG) compositions (two, four, and six EG repeating units). Unlike the typical procedure, GOP-PPF uses a nucleophilic aromatic substitution reaction for the facile and versatile attachment of functional units to a pre-synthesized conjugated-polymer precursor. Importantly, these redox-active PMIECs are investigated as a platform for energy storage devices and organic electrochemical transistors (OECTs) in aqueous media. The ion diffusivity, charge mobility and charge-storage capacity can be significantly improved by optimizing the EG composition. Specifically, g2T2-gBT6 containing the highest EG density gives the highest charge-storage capacity exceeding 180 F g-1 among the polymer series, resulting from the improved ion diffusivity. Moreover, g2T2-gBT4 with four EG repeating units exhibits a superior performance compared to its two analogues in OECTs, associated with a high μC* up to 359 F V-1 cm-1 s-1, owing to the optimal balance between ionic-electronic coupling and charge mobility. Through the GOP-PPF, PMIECs can be tailored to access desirable performance metrics at the molecular level.

Simulation of polymeric mixed ionic and electronic conductors with a combined classical and quantum mechanical model

In organic polymeric materials with mixed ionic and electronic conduction (OMIEC), the excess charge in doped polymers is very mobile and the dynamics of the polymer chain cannot be accurately described with a model including only fixed point charges. Ions and polymer are comparatively slower and a methodology to capture the correlated motions of excess charge and ions is currently unavailable. Considering a prototypical interface encountered in this type of materials, we constructed a scheme based on the combination of MD and QM/MM to evaluate the classical dynamics of polymer, water and ions, while allowing the excess charge of the polymer chains to rearrange following the external electrostatic potential. We find that the location of the excess charge varies substantially between chains. The excess charge changes across multiple timescales as a result of fast structural fluctuations and slow rearrangement of the polymeric chains. Our results indicate that such effects are likely important to describe the phenomenology of OMIEC, but additional features should be added to the model to enable the study of processes such as electrochemical doping.

Molecularly Hybridized Conduction in DPP-Based Donor-Acceptor Copolymers toward High-Performance Iono-Electronics

Iono-electronics, that is, transducing devices able to translate ionic injection into electrical output, continue to demand a variety of mixed ionic-electronic conductors (MIECs). Though polar sidechains are widely used in designing novel polymer MIECs, it remains unclear to chemists how much balance is needed between the two antagonistic modes of transport (ion permeability and electronic charge transport) to yield high-performance materials. Here, the impact of molecularly hybridizing ion permeability and charge mobility in semiconducting polymers on their performance in electrochemical and synaptic transistors is investigated. A series of diketopyrrolopyrrole (DPP)-based copolymers are employed to demonstrate the multifunctionality attained by controlling the density of polar sidechains along the backbone. Notably, efficient electrochemical signal transduction and reliable synaptic plasticity are demonstrated via controlled ion insertion and retention. The newly designed DPP-based copolymers further demonstrate unprecedented thermal tolerance among organic mixed ionic-electronic conductors, a key property in the manufacturing of organic electronics.

Ion Size-Dependent Electrochromism in Air-Stable Napthalenediimide-Based Conjugated Polymers

Conjugated polymers (CPs) that show stable and reversible cation insertion/deinsertion under ambient conditions hold great potential for optoelectronic and energy storage devices. However, n-doped CPs are prone to parasitic reactions upon exposure to moisture or oxygen. This study reports a new family of napthalenediimide (NDI) based conjugated polymers capable of undergoing electrochemical n-type doping in ambient air. By functionalizing the NDI-NDI repeating unit with alternating triethylene glycol and octadecyl side chains, the polymer backbone shows stable electrochemical doping at ambient conditions. We systematically investigate the extent of volumetric doping involving monovalent cations of varying size (Li⁺, Na⁺, tetraethylammonium (TEA⁺)) with electrochemical methods, including cyclic voltammetry, differential pulse voltammetry, spectroelectrochemistry, and electrochemical impedance spectroscopy. We observed that introducing hydrophilic side chains on the polymer backbone improves the local dielectric environment of the backbones and lowers the energetic barrier for ion insertion. Surprisingly, when using Na⁺ electrolyte, the polymer films exhibit higher volumetric doping efficiency, faster-switching kinetics, higher optical contrast, and selective multielectrochromism when compared to Li⁺ or TEA⁺ electrolytes. Using well-tempered metadynamics, we characterize the free energetics of side chain-ion interactions to find that Li⁺ binds more tightly to the glycolated NDI moieties than Na⁺, hindering Li⁺ ion transport, switching kinetics, and limiting the films' doping efficiency.

Engineering Multi-Scale Organization for Biotic and Organic Abiotic Electroactive Systems

Multi-scale organization of molecular and living components is one of the most critical parameters that regulate charge transport in electroactive systems-whether abiotic, biotic, or hybrid interfaces. In this article, an overview of the current state-of-the-art for controlling molecular order, nanoscale assembly, microstructure domains, and macroscale architectures of electroactive organic interfaces used for biomedical applications is provided. Discussed herein are the leading strategies and challenges to date for engineering the multi-scale organization of electroactive organic materials, including biomolecule-based materials, synthetic conjugated molecules, polymers, and their biohybrid analogs. Importantly, this review provides a unique discussion on how the dependence of conduction phenomena on structural organization is observed for electroactive organic materials, as well as for their living counterparts in electrogenic tissues and biotic-abiotic interfaces. Expansion of fabrication capabilities that enable higher resolution and throughput for the engineering of ordered, patterned, and architecture electroactive systems will significantly impact the future of bioelectronic technologies for medical devices, bioinspired harvesting platforms, and in vitro models of electroactive tissues. In summary, this article presents how ordering at multiple scales is important for modulating transport in both the electroactive organic, abiotic, and living components of bioelectronic systems.

Backbone coplanarity manipulation via hydrogen bonding to boost the n-type performance of polymeric mixed conductors operating in aqueous electrolyte

The development of high-performance n-type semiconducting polymers remains a significant challenge. Reported here is the construction of a coplanar backbone via intramolecular hydrogen bonds to dramatically enhance the performance of n-type polymeric mixed conductors operating in aqueous electrolyte. Specifically, glycolated naphthalene tetracarboxylicdiimide (gNDI) couples with vinylene and thiophene to give gNDI-V and gNDI-T, respectively. The hydrogen bonding functionalities are fused to the backbone to ensure a more coplanar backbone and much tighter π-π stacking of gNDI-V than gNDI-T, which is evidenced by density functional theory simulations and grazing-incidence wide-angle X-ray scattering. Importantly, these copolymers are fabricated as the active layer of the aqueous-based electrochromic devices and organic electrochemical transistors (OECTs). gNDI-V exhibits a larger electrochromic contrast (ΔT = 30%) and a higher coloration efficiency (1988 cm² C^-1) than gNDI-T owing to its more efficient ionic-electronic coupling. Moreover, gNDI-V gives the highest electron mobility (0.014 cm² V^-1 s^-1) and μC* (2.31 FV^-1 cm^-1 s^-1) reported to date for NDI-based copolymers in OECTs, attributed to the improved thin-film crystallinity and molecular packing promoted by hydrogen bonds. Overall, this work marks a remarkable advance in the n-type polymeric mixed conductors and the hydrogen bond functionalization strategy opens up an avenue to access desirable performance metrics for aqueous-based electrochemical devices.

Organic Mixed Ion-Electron Conductivity in Polymer Hybrid Systems

Recently, organic materials with mixed ion/electron conductivity (OMIEC) have gained significant interest among research communities all over the world. The unique ability to conduct ions and electrons in the same organic material adds to their use in next generation electrochemical, biotechnological, energy generation, energy storage, electrochromic, and sensor devices. Semiconducting conjugated polymers are well-known OMIECs due to their feasibility for both ion and electron transport in the bulk region. In this mini-review, we have shed light on conjugated polymers with ionic pendent groups, block copolymers of electronically and ionic conducting polymers, polymer electrolytes, blends of conjugated polymers with polyelectrolyte/polymer electrolytes; blends of conducting polymer with small organic molecules including conducting polymer-peptide conjugates; and blends of nonconjugated polymers as mixed conducting systems. These systems not only include the well-studied OMEIC systems, but also include some new systems where the OMEIC property has been predicted from the typical current-voltage (I-V) plots. The conduction mechanism of ions and electrons, ion-electron coupling, directionality, and dimensionality of these OMEIC materials are discussed in brief. The different properties of OMEIC materials and their applications in diverse fields like energy, electrochromic, biotechnology, sensing, and so forth are enlightened together with the perspective for future improvement of OMEIC materials.

Conjugated Polymers for Microwave Applications: Untethered Sensing Platforms and Multifunctional Devices

In the past two decades, organic electronic materials have enabled and accelerated a large and diverse set of technologies, from energy-harvesting devices and electromechanical actuators, to flexible and printed (opto)electronic circuitry. Among organic (semi)conductors, organic mixed ion-electronic conductors (OMIECs) are now at the center of renewed interest in organic electronics, as they are key drivers of recent developments in the fields of bioelectronics, energy storage, and neuromorphic computing. However, due to the relatively slow switching dynamics of organic electronics, their application in microwave technology, until recently, has been overlooked. Nonetheless, other unique properties of OMIECs, such as their substantial electrochemical tunability, charge-modulation range, and processability, make this field of use ripe with opportunities. In this work, the use of a series of solution-processed intrinsic OMIECs is demonstrated to actively tune the properties of metamaterial-inspired microwave devices, including an untethered bioelectrochemical sensing platform that requires no external power, and a tunable resonating structure with independent amplitude- and frequency-modulation. These devices showcase the considerable potential of OMIEC-based metadevices in autonomous bioelectronics and reconfigurable microwave optics.