Ionic Hydrogel for Efficient and Scalable Moisture-Electric Generation

Moisture-Electric Generators Working in Subzero Environments Based on Laser-Engraved Hygroscopic Hydrogel Arrays

Moisture-electric generators (MEGs) generate power by adsorbing water from the air. However, their performance at low temperatures is hindered due to icing. In the present work, MEG arrays are developed by laser engraving techniques and a modulated low-temperature hydrogel as the absorbent material. LTH effectively captures moisture and maintains ion dissociation and migration even at subzero temperatures. Based on the double electric layer pseudocapacitance model, the oscillating circuit theory is introduced to explain the effects of moisture absorption, evaporation, and ion migration on the output current of the MEG, and the circuit calculations are matched with the experimental results. Molecular dynamics simulations indicate that LTH's low-temperature stability results from preferential hydrogen bonding between glycerol molecules and H2O, which disrupts H2O-H2O hydrogen bonds and slows water crystallization. A single MEG unit (0.25 cm2) can produce up to ∼0.8 V and ∼21.2 μW/cm2 at room temperature, and at -35 °C with 16% RH, it generates ∼0.58 V and ∼14.35 μA. MEG realizes the following applications: MEG successfully drives electronic devices in snow; arrays of 16 MEGs can power portable electronics, and 384 MEGs can achieve up to 210 V; MEG absorbs moisture in water and drives LEDs by blowing up; MEG has a flexible wearable nature; MEG is used for respiratory monitoring and photoelectric sensors.

Recent Advances in Self-Powered Sensors Based on Ionic Hydrogels

After years of research and development, flexible sensors are gradually evolving from the traditional "electronic" paradigm to the "ionic" dimension. Smart flexible sensors derived from the concept of ion transport are gradually emerging in the flexible electronics. In particular, ionic hydrogels have increasingly become the focus of research on flexible sensors as a result of their tunable conductivity, flexibility, biocompatibility, and self-healable capabilities. Nevertheless, the majority of existing sensors based on ionic hydrogels still mainly rely on external power sources, which greatly restrict the dexterity and convenience of their applications. Advances in energy harvesting technologies offer substantial potential toward engineering self-powered sensors. This article reviews in detail the self-powered mechanisms of ionic hydrogel self-powered sensors (IHSSs), including piezoelectric, triboelectric, ionic diode, moist-electric, thermoelectric, potentiometric transduction, and hybrid modes. At the same time, structural engineering related to device and material characteristics is discussed. Additionally, the relevant applications of IHSS toward wearable electronics, human-machine interaction, environmental monitoring, and medical diagnostics are further reviewed. Lastly, the challenges and prospective advancement of IHSS are outlined.

A self-sustained moist-electric generator with enhanced energy density and longevity through a bilayer approach

Although MEG is being developed as a green renewable energy technology, there remains significant room for improvement in self-sustained power supply, generation duration, and energy density. In this study, we present a self-sustained, high-performance MEG device with a bilayer structure. The lower hydrogel layer incorporates graphene oxide (GO) and carbon nanotubes (CNTs) as the active materials, whereas the upper aerogel layer is comprised of pyrrole-modified graphene oxide (PGO). This design generates a dual-gradient structure (ion density gradient and relative humidity gradient), enabling continuous power generation from the intrinsic moisture in the hydrogel. The device can operate for up to 16 days without external water and extend its operation to 45 days with added moisture. Remarkably, encapsulating this MEG maintains its high performance output even after nearly three months. The short-circuit current of MEG reaches 1695 μA, with an energy density of 809.2 μW h cm-2, which is considerably higher than those reported in previous studies on MEG. This work highlights a promising approach for long-term, self-sustained power generation, with potential applications in environmental sensing and low-power devices.

Solvent induced method for preparation of multi-advantage carrageenan films

Carrageenan has good film-forming characteristics, but it is difficult to simultaneously improve its multiple performances, such as water-resistance, light transmittance and thermal stability. In this study, multi-advantage composite films were prepared by iota-carrageenan and quaternary ammonium surfactants according to solvent induced method. The weight change, FTIR and thermogravimetric analyses of the films before and after solvent inducement indicated that the inorganic counterions of iota-carrageenan were replaced by quaternary ammonium ions. By increasing surfactant content, the charge interaction with iota-carrageenan was enhanced and a new sharp peak appeared in the X-ray diffraction plots. Physical properties such as film thickness, water-resistance, water vapor transmission rate, and mechanical strength in various states were all related to the content of surfactants. In actual application, composite film with the highest waterproof property was able to maintain original state in water at 95 °C for >1.5 h. Meanwhile, composite films can be a water-induced generator with excellent self-charging and stable power output properties. A comparative study of the film transparency in terms of components and surface morphology was carried out. High light transmission, coupled with lower degradation rate in soil, suggests that these films are suitable for use as agricultural greenhouses and mulch films.

Moisture-based green energy harvesting over 600 hours via photocatalysis-enhanced hydrovoltaic effect

Harvesting the energy from the interaction between hygroscopic materials and atmospheric water can generate green and clean energy. However, the ion diffusion process of moisture-induced dissociation leads to the disappearance of the ion concentration gradient gradually, and there is still a lack of moisture-based power generation devices with truly continuous operation, especially the duration of the current output still needs to be extended. Here, we propose a design for reconstructing the ion concentration gradient by coupling photocatalytic hydrogen evolution reaction with hydrovoltaic effect, to report a moisture-enabled electric generator (MEG) with continuous current output. We show that the introduction of the photocatalytic layer not only absorbs light energy to greatly increase the power generation of the MEG (500% power density enhancement), but more importantly, the photocatalytic hydrogen evolution process consumes the pre-stacked ions to restore the ion concentration gradient, allowing the MEG to continuously output current for more than 600 hours, which is 1 to 2 orders of magnitude higher than the great majority of existed MEGs in terms of the current output duration.

High-Performance and Anti-Freezing Moisture-Electric Generator Combining Ion-Exchange Membrane and Ionic Hydrogel

Moisture-electric generators (MEGs), which convert moisture chemical potential energy into electrical power, are attracting increasing attention as clean energy harvesting and conversion technologies. However, existing devices suffer from inadequate moisture trapping, intermittent electric output, suboptimal performance at low relative humidity (RH), and limited ion separation efficiency. This study designs an ionic hydrogel MEG capable of continuously generating energy with enhanced selective ion transport and sustained ion-to-electron current conversion at low RH by integrating an ion-exchange membrane (IEM-MEG). A single IEM-MEG exhibits a maximum open-circuit voltage (VOC) of 0.815 V and a short-circuit current (ISC) of 101 µA at 80% RH. Even at a low RH of 10%, a stable VOC of 0.43 V and ISC of 11 µA can be generated. Moreover, the antifreeze performance of the device is improved by adding LiCl, which significantly expands its operational range in low-temperature environments. Finally, a simple series-parallel connection of six IEM-MEGs can yield an enhanced VOC of 4.8 V and a ISC of ≈0.6 mA, and the scalable units can directly power commercial electronics. This study provides new insights into the design of MEGs that will advance the development of green energy conversion technologies in the future.

Fully Printable Manufacturing of Miniaturized, Highly Integrated, Flexible Evaporation-Driven Electricity Generator Arrays

Harvesting sustainable clean energy from natural water evaporation holds great promise to provide continuous power for portable and wearable electronics. However, poor portability and complex fabrication processes hinder the low-cost and large-scale integration of flexible evaporation-driven electricity generators (FEEGs). Herein, a fully-printed flexible evaporation-driven generator (PFEEG) is developed. Utilizing custom-formulated functional inks, the asymmetric structures, current collectors, and hygroscopic water storage units can be manufactured by a patternable, scalable, and layer-by-layer deposition technique of screen printing. Thus, a PFEEG unit (0.5 cm × 1 cm × 38 µm) can generate a voltage of ≈0.8 V over a wide relative humidity (RH) range from 20% to 90%, and a maximum power density of 1.55 µW cm-2 at 70% RH. An array of 200 PFEEGs connected in series or parallel can produce voltages up to 152.41 V or a current up to 1.02 mA. Furthermore, the scalable PFEEG array can not only be seamlessly connected with the printed flexible circuit but can also be integrated with a humidity sensor and display arrays to form a self-powered printed flexible sensing system. This work presents a practical strategy for continuous power supply of portable and wearable electronics.

A Paper-Based Wearable Moist-Electric Generator for Sustained High-Efficiency Power Output and Enhanced Moisture Capture

Disposable wearable electronics are valuable for diagnostic and healthcare purposes, reducing maintenance needs and enabling broad accessibility. However, integrating a reliable power supply is crucial for their advancement, but conventional power sources present significant challenges. To address that issue, a novel paper-based moist-electric generator is developed that harnesses ambient moisture for power generation. The device features gradients for functional groups and moisture adsorption and architecture of nanostructures within a disposable paper substrate. The nanoporous, gradient-formed spore-based biofilm and asymmetric electrode deposition enable sustained high-efficiency power output. A Janus hydrophobic-hydrophilic paper layer enhances moisture harvesting, ensuring effective operation even in low-humidity environments. This research reveals that the water adsorption gradient is crucial for performance under high humidity, whereas the functional group gradient is dominant under low humidity. The device delivers consistent performance across diverse conditions and flexibly conforms to various surfaces, making it ideal for wearable applications. Its eco-friendly, cost-effective, and disposable nature makes it a viable solution for widespread use with minimal environmental effects. This innovative approach overcomes the limitations of traditional power sources for wearable electronics, offering a sustainable solution for future disposable wearables. It significantly enhances personalized medicine through improved health monitoring and diagnostics.

Ionically assembled hemostatic powders with rapid self-gelation, strong acid resistance, and on-demand removability for upper gastrointestinal bleeding

Upper gastrointestinal bleeding (UGIB) is bleeding in the upper part of the gastrointestinal tract with an acidic and dynamic environment that limits the application of conventional hemostatic materials. This study focuses on the development of N-[(2-hydroxy-3-trimethylammonium) propyl] chitosan chloride/phytic acid (HTCC/PA, HP) powders with fast hemostatic capability and strong acid resistance, for potential applications in managing UGIB. Upon contact with liquids within 5 seconds, HP powders rapidly transform into hydrogels, forming ionic networks through electrostatic interactions. The ionic crosslinking process facilitates the HP powders with high blood absorption (3.4 times of self-weight), sufficient tissue adhesion (5.2 and 6.1 kPa on porcine skin and stomach, respectively), and hemostasis (within 15 seconds for in vitro clotting). Interestingly, the PA imparts the HP powders with strong acid resistance (69.8% mass remaining after 10 days of incubation at pH 1) and on-demand removable sealing while HTCC contributes to fast hemostasis and good wet adhesion. Moreover, the HP powders show good biocompatibility and promote wound healing. Therefore, these characteristics highlight the promising clinical potential of HP powders for effectively managing UGIB.

Water-Triboelectrification-Complemented Moisture Electric Generator

Energy harvesting from ubiquitous natural water vapor based on moisture electric generator (MEG) technology holds great potential to power portable electronics, the Internet of Things, and wireless transmission. However, most devices still encounter challenges of low output, and a single MEG complemented with another form of energy harvesting for achieving high power has seldom been demonstrated. Herein, we report a flexible and efficient hybrid generator capable of harvesting moisture and tribo energies simultaneously, both from the source of water droplets. The moisture electric and triboelectric layers are based on a water-absorbent citric acid (CA)-mediated polyglutamic acid (PGA) hydrogel and porous electret expanded polytetrafluoroethylene (E-PTFE), respectively. Such a waterproof E-PTFE film not only enables efficient triboelectrification with water droplets' contact but also facilitates water vapor to be transferred into the hydrogel layer for moisture electricity generation. A single hybrid generator under water droplets' impact delivers a DC voltage of 0.55 V and a peak current density of 120 μA cm-2 from the MEG, together with a simultaneous AC output voltage of 300 V and a current of 400 μA from the complementary water-based triboelectric generator (TEG) side. Such a hybrid generator can work even under harsh wild environments with 5 °C cold and saltwater impacts. Significantly, an optical alarm and wireless communication system for wild, complex, and emergency scenarios is demonstrated with power from the hybrid generators. This work expands the applications of water-based electricity generation technologies and provides insight into harvesting multiple potential energies in the natural environment with high output.

Recent advances in moisture-induced electricity generation based on wood lignocellulose: Preparation, properties, and applications

Moisture-induced electricity generation (MEG), which can directly harvest electricity from moisture, is considered as an effective strategy for alleviating the growing energy crisis. Recently, tremendous efforts have been devoted to developing MEG active materials from wood lignocellulose (WLC) due to its excellent properties including environmental friendliness, sustainability, and biodegradability. This review comprehensively summarizes the recent advances in MEG based on WLC (wood, cellulose, lignin, and woody biochar), covering its principles, preparation, performances, and applications. In detail, the basic working mechanisms of MEG are discussed, and the natural features of WLC and their significant advantages in the fabrication of MEG active materials are emphasized. Furthermore, the recent advances in WLC-based MEG for harvesting electrical energy from moisture are specifically discussed, together with their potential applications (sensors and power sources). Finally, the main challenges of current WLC-based MEG are presented, as well as the potential solutions or directions to develop highly efficient MEG from WLC.

Ionic Hydrogel-Based Moisture Electric Generators for Underwater Electronics

Ubiquitous moisture is of particular interest for sustainable power generation and self-powered electronics. However, current moisture electric generators (MEGs) can only harvest moisture energy in the air, which tremendously limits the energy harvesting efficiency and practical application scenarios. Herein, the operationality of MEG from air to underwater environment, through a sandwiched engineered-hydrogel device with an additional waterproof breathable membrane layer allowing water vapor exchange while preventing liquid water penetration, is expanded. Underwater environment, the device can spontaneously deliver a voltage of 0.55 V and a current density of 130 µA cm-2 due to the efficient ion separation assisted by negative ions confinement in hydrogel networks. The output can be maintained even under harsh underwater environment with 10% salt concentration, 1 m s-1 disturbing flow, as well as >40 kPa hydraulic pressure. The engineered hydrogel used for MEG also exhibits excellent self-healing ability, flexibility, and biocompatibility. As the first demonstration of practical applications in self-powered underwater electronics, the MEG device is successfully powering a wireless emitter for remote communication in water. This new type of MEG offers an innovative route for harvesting moisture energy underwater and holds promise in the creation of a new range of innovative electronic devices for marine Internet-of-Things.

Multi-Template-Guided Synthesis of High-Dimensional Molecular Assemblies for Humidity Gradient-Based Power Generators

Systematically orchestrating fundamental building blocks into intricate high-dimensional molecular assemblies at molecular level is imperative for multifunctionality integration. However, this remains a formidable task in crystal engineering due to the dynamic nature of inorganic building blocks. Herein, we develop a multi-template-guided strategy to control building blocks. The coordination modes of ligands and the spatial hindrance of anionic templates are pivotal in dictating the overall structures. Flexible multi-dentate linkers selectively promote the formation of oligomeric assembly ([TeO3(Mo2O2S2)3O2(OH)(C5O2H7)3]4- {TeMo6}) into tetrahedral cages ([(TeO3)4(Mo2O2S2)12(OH)12(C9H9O4P)6]8- {Te4Mo24} and [(AsO4)4(Mo2O2S2)12(OH)12(C9H9O6)4]12- {As4Mo24}), while steric hindrance from anionic templates further assists in assembling cages into an open quadruply twisted Möbius nanobelt ([(C6H5O3P)8(Mo2O2S2)24(OH)24(C8H10O4)12]16- {P8Mo48}). Among these structures, the hydrophilic-hydrophobic hybrid cage {Te4Mo24} emerges as an exemplary molecular model for proton conduction and serves as a prototype for humidity gradient-based power generators (HGPGs). The Te4Mo24-PVDF-based HGPG (PVDF=Poly(vinylidene fluoride)) exhibits notable stability and power generation, yielding an open-circuit voltage of 0.51 V and a current density of 77.8 nA cm-2 at room temperature and 90 % relative humidity (RH). Further insights into the interactions between water molecules and microscale molecules within the generator are achieved through molecular dynamics simulations. This endeavor unveils a universal strategy for synthesizing multifunctional integration molecules.

Ambient Moisture-Driven Self-Powered Iontophoresis Patch for Enhanced Transdermal Drug Delivery

Iontophoretic transdermal drug delivery (TDD) devices are known to enhance the transdermal transport of drugs. However, conventional transdermal iontophoretic devices require external power sources, wired connections, or mechanical parts, which reduce the comfort level for patients during extended use. In this work, a self-powered, wearable transdermal iontophoretic patch (TIP) is proposed by harvesting ambient humidity for energy generation, enabling controlled TDD. This patch primarily uses moist-electric generators (MEGs) as its power source, thus obviating the need for complex power management modules and mechanical components. A single MEG unit can produce an open-circuit voltage of 0.80 V and a short-circuit current of 11.65 µA under the condition of 80% relative humidity. Amplification of the electrical output is feasible by connecting multiple generator units in series and parallel, facilitating the powering of certain commercial electronic devices. Subsequently, the MEG array is integrated with the TDD circuit to create the wearable TIP. After 20 min of application, the depth of drug penetration through the skin is observed to increase threefold. The effective promotion effect of TIP on the transdermal delivery of ionized drugs is corroborated by simulations and experiments. This wearable TIP offers a simple, noninvasive solution for TDD.

High-performance, breathable and flame-retardant moist-electric generator based on asymmetrical nanofiber membrane assembly

Moist-electric generators (MEGs), which are capable of spontaneously generating energy from ubiquitous moisture, are considered as a potential power supply candidate for wearable electronics. However, the application of the MEGs in the wearable field is still challenging due to the low electric output and the lack of wearable attributes such as breathability and flame retardancy. Herein, we demonstrated a wearable MEG with high power-output, breathability and flame retardancy, which was fabricated by designing an asymmetrical nanofiber assembly using hydrophilic polyvinyl alcohol/phytic acid (PVA/PA) and hydrophobic polyvinylidene difluoride (PVDF) nanofiber membranes. Owing to the synergistic effects of strong water absorption, enhanced ion release and numerous micro-nano transport channels, a single MEG of 1 cm2 could constantly generate high direct-current (DC) power, i.e., a voltage of 1.0 V, a current of 15.5 μA, and a power density of 3.0 μW cm-2, outperforming other reported nanofiber-based MEGs. More importantly, the asymmetric nanofiber structure ensured the moisture circulation inside MEG and thus produced a sustained voltage output for 7 days without any deterioration. The MEG also showed good flexibility, air/moisture permeability and flame retardancy, which give it necessary wearable attributes. Furthermore, large-scale integration of MEG units could be readily realized to fabricate a power source device for driving different portable electronics, while the moisture sensitivity made the MEG well used for sensing applications (e.g., respiration monitoring, fire warning).

Elastomeric Ionic Hydrogel-Based Flexible Moisture-Electric Generator for Next-Generation Wearable Electronics

Rapid consumption of traditional energy resources creates utmost research interest in developing self-sufficient electrical devices to progress next-generation electronics to a level up. To address the global energy crisis, moisture-electric generators (MEGs) are proving to be an emerging technology in this field, capable of powering wearable electronics by harvesting energy from abundantly available ambient moisture without any requirement for external/additional energy. Recent advances in MEGs generally utilize an inorganic, metal, or petroleum-based polymeric material as an active material, which may produce sufficient current but lacks the flexibility and stretchability required for wearable electronics. Herein, we prepared an elastomer-based ionic hydrogel as an active material, and an MEG was fabricated by placing the ionic hydrogel on a PET sheet with two copper tapes on both sides of the hydrogel. The preparation of the hydrogel was thoroughly optimized and characterized in terms of spectroscopic analysis, swelling, water retention, and mechanical and rheological studies. The highly stretchable (350%) fabricated MEG is capable of producing a short-circuit current (JSC) of 16.1 μA/cm2, an open-circuit voltage (VOC) of 0.24 V, and a power density of 3.86 μW/cm2. The synergistic effect of the ion concentration gradient and the redox reaction on electrodes can be considered MEG's working principle. Apart from the current generation, this device is also used as a self-powered electronic sensor to monitor different physical activities by measuring breathing patterns. This prepared device is also capable of sensing the proximity of a hand. Therefore, our low-cost, easily fabricable, sustainable MEG device can be a potential aspirant for next-generation self-powered wearable electronics in healthcare applications.

Hydrovoltaic Effects from Mechanical-Electric Coupling at the Water-Solid Interface

The natural water cycle on the Earth carries an enormous amount of energy as thirty-five percent of solar energy reaching the Earth's surface goes into water. However, only a very marginal part of the contained energy, mostly kinetic energy of large volume bulk water, is harvested by hydroelectric power plants. Natural processes in the water cycle, such as rainfall, water evaporation, and moisture adsorption, are widespread but have remained underexploited in the past due to the lack of appropriate technologies. In the past decade, the emergence of hydrovoltaic technology has provided ever-increasing opportunities to extend the technical capability for energy harvesting from the water cycle. Featuring electricity generation from mechanical-electric coupling at the water-solid interface, hydrovoltaic technology embraces almost all dynamic processes associated with water, including raining, waving, flowing, evaporating, and moisture adsorbing. This versatility in dealing with various forms of water and associated energy renders hydrovoltaic technology a solution for fossil fuel-caused environmental problems. Here, we review the current progress of hydrovoltaic energy harvesting from water motion, evaporation, and ambient moisture. Device configuration, energy conversion mechanism mediated by mechanical-electric coupling at various water-solid interfaces, as well as materials selection and functionalization are discussed. Useful strategies guided by established mechanisms for device optimization are then covered. Finally, we provide an outlook on this emerging field and outline the challenges of improving output performance toward potential practical applications.

Zero-Biased Bionic Fingertip E-Skin with Multimodal Tactile Perception and Artificial Intelligence for Augmented Touch Awareness

Electronic skins (E-Skins) are crucial for future robotics and wearable devices to interact with and perceive the real world. Prior research faces challenges in achieving comprehensive tactile perception and versatile functionality while keeping system simplicity for lack of multimodal sensing capability in a single sensor. Two kinds of tactile sensors, transient voltage artificial neuron (TVAN) and sustained potential artificial neuron (SPAN), featuring self-generated zero-biased signals are developed to realize synergistic sensing of multimodal information (vibration, material, texture, pressure, and temperature) in a single device instead of complex sensor arrays. Simultaneously, machine learning with feature fusion is applied to fully decode their output information and compensate for the inevitable instability of applied force, speed, etc, in real applications. Integrating TVAN and SPAN, the formed E-Skin achieves holistic touch awareness in only a single unit. It can thoroughly perceive an object through a simple touch without strictly controlled testing conditions, realize the capability to discern surface roughness from 0.8 to 1600 µm, hardness from 6HA to 85HD, and correctly distinguish 16 objects with temperature variance from 0 to 80 °C. The E-skin also features a simple and scalable fabrication process, which can be integrated into various devices for broad applications.

Wetting Behavior-Induced Interfacial transmission of Energy and Signal: Materials, Mechanisms, and Applications

Wetting behaviors can significantly affect the transport of energy and signal (E&S) through vapor, solid, and liquid interfaces, which has prompted increased interest in interfacial science and technology. E&S transmission can be achieved using electricity, light, and heat, which often accompany and interact with each other. Over the past decade, their distinctive transport phenomena during wetting processes have made significant contributions to various domains. However, few studies have analyzed the intricate relationship between wetting behavior and E&S transport. This review summarizes and discusses the mechanisms of electrical, light, and heat transmission at wetting interfaces to elucidate their respective scientific issues, technical characteristics, challenges, commonalities, and potential for technological convergence. The materials, structures, and devices involved in E&S transportation are also analyzed. Particularly, harnessing synergistic advantages in practical applications and constructing advanced, multifunctional, and highly efficient smart systems based on wetted interfaces is the aim to provide strategies.

Research Progress and Emerging Directions in Stimulus Electro-Responsive Polymer Materials

Stimulus electro-responsive polymer materials can reversibly change their physical or chemical properties under various external stimuli such as temperature, light, force, humidity, pH, and magnetic fields. This review introduces typical conventional stimulus electro-responsive polymer materials and extensively explores novel directions in the field, including multi-stimuli electro-responsive polymer materials and humidity electro-responsive polymer materials pioneered by our research group. Despite significant advancements in stimulus electro-responsive polymer materials, ongoing research focuses on enhancing their efficiency, lifespan, and production costs. Interdisciplinary collaboration and advanced technologies promise to broaden the application scope of these materials, particularly in medical and environmental protection fields, ultimately benefiting society.

Moisture Power Generation: From Material Selection to Device Structure Optimization

Moisture power generation (MPG) technology, producing clean and sustainable energy from a humid environment, has drawn significant attention and research efforts in recent years as a means of easing the energy crisis. Despite the rapid progress, MPG technology still faces numerous challenges with the most significant one being the low power-generating performance of individual MPG devices. In this review, we introduce the background and underlying principles of MPG technology while thoroughly explaining how the selection of suitable materials (carbons, polymers, inorganic salts, etc.) and the optimization of the device structure (pore structure, moisture gradient structure, functional group gradient structure, and electrode structure) can address the existing and anticipated challenges. Furthermore, this review highlights the major scientific and engineering hurdles on the way to advancing MPG technology and offers potential insights for the development of high-performance MPG systems.

Radiative cooling assisted self-sustaining and highly efficient moisture energy harvesting

Harvesting electricity from ubiquitous water vapor represents a promising route to alleviate the energy crisis. However, existing studies rarely comprehensively consider the impact of natural environmental fluctuations on electrical output. Here, we demonstrate a bilayer polymer enabling self-sustaining and highly efficient moisture-electric generation from the hydrological cycle by establishing a stable internal directed water/ion flow through thermal exchange with the ambient environment. Specifically, the radiative cooling effect of the hydrophobic top layer prevents the excessive daytime evaporation from solar absorption while accelerating nighttime moisture sorption. The introduction of LiCl into the bottom hygroscopic ionic hydrogel enhances moisture sorption capacity and facilitates ion transport, thus ensuring efficient energy conversion. A single device unit (1 cm2) can continuously generate a voltage of ~0.88 V and a current of ~306 μA, delivering a maximum power density of ~51 μW cm-2 at 25 °C and 70% relative humidity (RH). The device has been demonstrated to operate steadily outdoors for continuous 6 days.

Hierarchical Bilayer Polyelectrolyte Ion Paper Conductor for Moisture-Induced Power Generation

Harvesting energy from air water (atmospheric moisture) promises a sustainable self-powered system without any restrictions from specific environmental requirements (e.g., solar cells, hydroelectric, or thermoelectric devices). However, the present moisture-induced power devices traditionally generate intermittent or bursts of energy, especially for much lower current outputs (generally keeping at nA or μA levels) from the ambient environment, typically suffering from inferior ionic conductivity and poor hierarchical structure design for manipulating sustained air water and ion-charge transport. Here, we demonstrate a universal strategy to design a high-performance bilayer polyelectrolyte ion paper conductor for generating continuous electric power from ambient humidity. The generator can produce a continuous voltage of up to 0.74 V and also an exceptional current of 5.63 mA across a single 1.0 mm-thick ion paper conductor. We discover that the sandwiched LiCl-nanocellulose-engineered paper promises an ion-transport junction between the negatively and positively charged bilayer polyelectrolytes for application in MEGs with both high voltage and high current outputs. Moreover, we demonstrated the universality of this bilayer sandwich nanocellulose-salt engineering strategy with other anions and cations, exhibiting similar power generation ability, indicating that it could be the next generation of sustainable MEGs with low cost, easier operation, and high performance.

Photothermally carbonized natural kelp for hydrovoltaic power generation

We have developed an eco-friendly and efficient method for hydrovoltaic power generation through carbonizing natural kelp, a hydrogel with abundant cations. Under ambient conditions, a CO2 laser beam was focused on the top surface of dried kelp, photothermally converting it into porous graphitic carbon (PGC) and reducing dissociable cations by thermal evaporation. Owing to the preservation of the bottom surface, this photothermal process yielded a PGC-hydrogel membrane (PHM) featuring a cation concentration gradient. With the introduction of deionized water to the intact region, the kelp hydrogel retained a considerable volume of water, creating a moist environment for the PGC. The cation concentration gradient facilitated a continuous migration of cations between the PGC and unaltered kelp, generating a voltage of 0.34 V and a current density of 49 μA/cm2. We demonstrated its practical applicability by turning on three light-emitting diodes using an array of eight PHMs.

High-Performance One-Component Epoxy Adhesive Based on the Synergistic Effect of Lignin-Derived Triaryl-Imidazole and Phytic Acid

Latent curing agents are essential in the formulation of one-component epoxy resins, yet they are seldom derived from fully biobased chemicals. In the present work, a fully biobased latent curing agent for epoxy resins (BIMPA) was produced by synthesizing an ionic complex of lignin-derived triaryl-imidazole (BIM) and phytic acid (PA). Benefiting from the synergistic effect of BIM and PA, the one-component epoxy resin, composed of BIMPA and commercially available E51, exhibits a storage stability of over 90 days. Upon heating, the ionic complex undergoes decomposition, liberating the active imidazole to cure the precursor. The resulting epoxy resins exhibited a flexural modulus of 3.09 GPa, a flexural strength of 107.47 MPa, a notched izod impact strength of 2.47 kJ/m3, and a shear strength of 41.02 MPa. The outcome can provide an effective supplement for the development of biobased epoxy resins.

Diverse Applications of Two-Dimensional Correlation Spectroscopy (2D-COS)

This second of the two-part series of a comprehensive survey review provides the diverse applications of two-dimensional correlation spectroscopy (2D-COS) covering different probes, perturbations, and systems in the last two years. Infrared spectroscopy has maintained its top popularity in 2D-COS over the past two years. Fluorescence spectroscopy is the second most frequently used analytical method, which has been heavily applied to the analysis of heavy metal binding, environmental, and solution systems. Various other analytical methods including laser-induced breakdown spectroscopy, dynamic mechanical analysis, differential scanning calorimetry, capillary electrophoresis, seismologic, and so on, have also been reported. In the last two years, concentration, composition, and pH are the main effects of perturbation used in the 2D-COS fields, as well as temperature. Environmental science is especially heavily studied using 2D-COS. This comprehensive survey review shows that 2D-COS undergoes continuous evolution and growth, marked by novel developments and successful applications across diverse scientific fields.

Hydrophilic 1T-WS2 Nanosheet Arrays toward Conductive Textiles for High-Efficient and Continuous Hydroelectric Generation and Storage

Flexible hydroelectric generators (HEGs) are promising self-powered devices that spontaneously derive electrical power from moisture. However, achieving the desired compatibility between a continuous operating voltage and superior current density remains a significant challenge. Herein, a textile-based van der Waals heterostructure is rationally designed between conductive 1T phase tungsten disulfide@carbonized silk (1T-WS2@CSilk) and carbon black@cotton (CB@Cotton) fabrics with an asymmetric distribution of oxygen-containing functional groups, which enhances the proton concentration gradients toward high-performance wearable HEGs. The vertically staggered 1T-WS2 nanosheet arrays on the CSilk fabric provide abundant hydrophilic nanochannels for rapid carrier transport. Furthermore, the moisture-induced primary battery formed between the active aluminum (Al) electrode and the conductive textiles introduces the desired electric field to facilitate charge separation and compensate for the decreased streaming potential. These devices exhibit a power density of 21.6 µW cm-2, an open-circuit voltage (Voc) of 0.65 V sustained for over 10 000 s, and a current density of 0.17 mA cm-2. This performance makes them capable of supplying power to commercial electronics and human respiratory monitoring. This study presents a promising strategy for the refined design of wearable electronics.

Polyelectrolyte Hydrogel-Functionalized Photothermal Sponge Enables Simultaneously Continuous Solar Desalination and Electricity Generation Without Salt Accumulation

Technologies that can simultaneously generate electricity and desalinate seawater are highly attractive and required to meet the increasing global demand for power and clean water. Here, a bifunctional solar evaporator that features continuous electric generation in seawater without salt accumulation is developed by rational design of polyelectrolyte hydrogel-functionalized photothermal sponge. This evaporator not only exhibits an unprecedentedly high water evaporation rate of 3.53 kg m-2 h-1along with 98.6% solar energy conversion efficiency but can also uninterruptedly deliver a voltage output of 0.972 V and a current density of 172.38 µA cm-2 in high-concentration brine over a prolonged period under one sun irradiation. Many common electronic devices can be driven by simply connecting evaporator units in series or in parallel without any other auxiliaries. Different from the previously proposed power generation mechanism, this study reveals that the water-enabled proton concentration fields in intermediate water region can also induce an additional ion electric field in free water region containing solute, to further enhance electricity output. Given the low-cost materials, simple self-regeneration design, scalable fabrication processes, and stable performance, this work offers a promising strategy for addressing the shortages of clean water and sustainable electricity.

Triboelectric Energy Harvesting from Highly Conjugated Fused Aromatic Ladder Structure Under Extreme Environmental Conditions

Practical application of triboelectric nanogenerators (TENGs) has been challenging, particularly, under harsh environmental conditions. This work proposes a novel 3D-fused aromatic ladder (FAL) structure as a tribo-positive material for TENGs, to address these challenges. The 3D-FAL offers a unique materials engineering platform for tailored properties, such as high specific surface area and porosity, good thermal and mechanical stability, and tunable electronic properties. The fabricated 3D-FAL-based TENG reaches a maximum peak power density of 451.2 µW cm-2 at 5 Hz frequency. More importantly, the 3D-FAL-based TENG maintains stable output performance under harsh operating environments, over wide temperature (-45-100 °C) and humidity ranges (8.3-96.7% RH), representing the development of novel FAL for sustainable energy generation under challenging environmental conditions. Furthermore, the 3D-FAL-based TENG proves to be a promising device for a speed monitoring system engaging reconstruction in virtual reality in a snowy environment.

Green moisture-electric generator based on supramolecular hydrogel with tens of milliamp electricity toward practical applications

Moisture-electric generators (MEGs) has emerged as promising green technology to achieve carbon neutrality in next-generation energy suppliers, especially combined with ecofriendly materials. Hitherto, challenges remain for MEGs as direct power source in practical applications due to low and intermittent electric output. Here we design a green MEG with high direct-current electricity by introducing polyvinyl alcohol-sodium alginate-based supramolecular hydrogel as active material. A single unit can generate an improved power density of ca. 0.11 mW cm-2, a milliamp-scale short-circuit current density of ca. 1.31 mA cm-2 and an open-circuit voltage of ca. 1.30 V. Such excellent electricity is mainly attributed to enhanced moisture absorption and remained water gradient to initiate ample ions transport within hydrogel by theoretical calculation and experiments. Notably, an enlarged current of ca. 65 mA is achieved by a parallel-integrated MEG bank. The scalable MEGs can directly power many commercial electronics in real-life scenarios, such as charging smart watch, illuminating a household bulb, driving a digital clock for one month. This work provides new insight into constructing green, high-performance and scalable energy source for Internet-of-Things and wearable applications.

Moisture-Enabled Electricity from Hygroscopic Materials: A New Type of Clean Energy

Water utilization is accompanied with the development of human beings, whereas gaseous moisture is usually regarded as an underexploited resource. The advances of highly efficient hygroscopic materials endow atmospheric water harvesting as an intriguing solution to convert moisture into clean water. The discovery of hygroelectricity, which refers to the charge buildup at a material surface dependent on humidity, and the following moisture-enabled electric generation (MEG) realizes energy conversion and directly outputs electricity. Much progress has been made since then to optimize MEG performance, pushing forward the applications of MEG into a practical level. Herein, the evolvement and development of MEG are systematically summarized in a chronological order. The optimization strategies of MEG are discussed and comprehensively evaluated. Then, the latest applications of MEG are presented, including high-performance powering units and self-powered devices. In the end, a perspective on the future development of MEG is given for inspiring more researchers into this promising area.

Hydrovoltaic Electricity Generator with Hygroscopic Materials: A Review and New Perspective

The global energy crisis caused by the overconsumption of nonrenewable fuels has prompted researchers to develop alternative strategies for producing electrical energy. In this review, a fascinating strategy that simply utilizes water, an abundant natural substance throughout the globe and even in air as moisture, as a power source is introduced. The concept of the hydrovoltaic electricity generator (HEG) proposed herein involves generating an electrical potential gradient by exposing the two ends of the HEG device to dissimilar physicochemical environments, which leads to the production of an electrical current through the active material. HEGs, with a large variety of viable active materials, have much potential for expansion toward diverse applications including permanent and/or emergency power sources. In this review, representative HEGs that generate electricity by the mechanisms of diffusion, streaming, and capacitance as case studies for building a fundamental understanding of the electricity generation process are discussed. In particular, by comparing the use and absence of hygroscopic materials, HEG mechanism studies to establish active material design principles are meticulously elucidated. The review with future perspectives on electrode design using conducting nanomaterials, considerations for high performance device construction, and potential impacts of the HEG technology in improving the livelihoods are reviewed.

A Review of Polymer-Based Environment-Induced Nanogenerators: Power Generation Performance and Polymer Material Manipulations

Natural environment hosts a considerable amount of accessible energy, comprising mechanical, thermal, and chemical potentials. Environment-induced nanogenerators are nanomaterial-based electronic chips that capture environmental energy and convert it into electricity in an environmentally friendly way. Polymers, characterized by their superior flexibility, lightweight, and ease of processing, are considered viable materials. In this paper, a thorough review and comparison of various polymer-based nanogenerators were provided, focusing on their power generation principles, key materials, power density and stability, and performance modulation methods. The latest developed nanogenerators mainly include triboelectric nanogenerators (TriboENG), piezoelectric nanogenerators (PENG), thermoelectric nanogenerators (ThermoENG), osmotic power nanogenerator (OPNG), and moist-electric generators (MENG). Potential practical applications of polymer-based nanogenerator were also summarized. The review found that polymer nanogenerators can harness a variety of energy sources, with the basic power generation mechanism centered on displacement/conduction currents induced by dipole/ion polarization, due to the non-uniform distribution of physical fields within the polymers. The performance enhancement should mainly start from strengthening the ion mobility and positive/negative ion separation in polymer materials. The development of ionic hydrogel and hydrogel matrix composites is promising for future nanogenerators and can also enable multi-energy collaborative power generation. In addition, enhancing the uneven distribution of temperature, concentration, and pressure induced by surrounding environment within polymer materials can also effectively improve output performance. Finally, the challenges faced by polymer-based nanogenerators and directions for future development were prospected.

Modified Wood Fibers Spontaneously Harvest Electricity from Moisture

With the rapid development of modern society, our demand for energy is increasing. And the extensive use of fossil energy has triggered a series of problems such as an energy crisis and environmental pollution. A moisture-enabled electric generator (MEG) is a new type of energy conversion method, which can directly convert the ubiquitous moisture in the air into electrical energy equipment. It has attracted great interest for its renewable and environmentally friendly qualities. At present, most MEGs still have low power density, strong dependence on high humidity, and high cost. Herein, we report the development of a high-efficiency MEG based on a lignocellulosic fiber frame with high-power-density, all-weather, and low-cost characteristics using a simple strategy that optimizes the charge transport channel and ion concentration difference. The MEG devices we manufactured can generate the open-circuit voltage of 0.73 V and the short-circuit current of 360 μA, and the voltage can still reach 0.6 V at less than 30% humidity. It is possible to drive commercial electronic devices such as light-emitting diodes, electronic displays, and electronic calculators by simply connecting several electric generators in series. Biomass-based moisture-enabled electric generation has a low cost, is easy to integrate on a large scale, and is green and pollution-free, providing clean energy for low-humidity or high-electricity-cost areas.

Phyto-inspired sustainable and high-performance fabric generators via moisture absorption-evaporation cycles

Collecting energy from the ubiquitous water cycle has emerged as a promising technology for power generation. Here, we have developed a sustainable moisture absorption-evaporation cycling fabric (Mac-fabric). On the basis of the cycling unidirectional moisture conduction in the fabric and charge separation induced by the negative charge channel, sustainable constant voltage power generation can be achieved. A single Mac-fabric can achieve a high power output of 0.144 W/m2 (5.76 × 102 W/m3) at 40% relative humidity (RH) and 20°C. By assembling 500 series and 300 parallel units of Mac-fabrics, a large-scale demo achieves 350 V of series voltage and 33.76 mA of parallel current at 25% RH and 20°C. Thousands of Mac-fabric units are sewn into a tent to directly power commercial electronic products such as mobile phones in outdoor environments. The lightweight (300 g/m2) and soft characteristics of the Mac-fabric make it ideal for large-area integration and energy collection in real circumstances.

Bionic artificial skin with a fully implantable wireless tactile sensory system for wound healing and restoring skin tactile function

Tactile function is essential for human life as it enables us to recognize texture and respond to external stimuli, including potential threats with sharp objects that may result in punctures or lacerations. Severe skin damage caused by severe burns, skin cancer, chemical accidents, and industrial accidents damage the structure of the skin tissue as well as the nerve system, resulting in permanent tactile sensory dysfunction, which significantly impacts an individual's daily life. Here, we introduce a fully-implantable wireless powered tactile sensory system embedded artificial skin (WTSA), with stable operation, to restore permanently damaged tactile function and promote wound healing for regenerating severely damaged skin. The fabricated WTSA facilitates (i) replacement of severely damaged tactile sensory with broad biocompatibility, (ii) promoting of skin wound healing and regeneration through collagen and fibrin-based artificial skin (CFAS), and (iii) minimization of foreign body reaction via hydrogel coating on neural interface electrodes. Furthermore, the WTSA shows a stable operation as a sensory system as evidenced by the quantitative analysis of leg movement angle and electromyogram (EMG) signals in response to varying intensities of applied pressures.

Mapping Capillary Infiltration-Induced Potential in Water-Triggered Electric Generator Using an Electrical Probe Integrated Microscope

Power generation from water-triggered capillary action in porous structures has recently geared extensive attention, offering the potential for generating electricity from ubiquitous water evaporation. However, conclusively establishing the nature of electrical generation and charge transfer is extremely challenging arising from the complicated aqueous solid-liquid interfacial phenomenon. Here, an electric probe-integrated microscope is developed to on-line monitor the correlation between water capillary action and potential values at any desired position of an active layer. With a probe spatial resolution reaching up to fifty micrometers, the internal factors prevailing over the potential distribution across the whole wet and dry regions are comprehensively identified. Further, the self-powered sensing capabilities of this integrated system are also demonstrated, including real-time monitoring of wind speed, environmental humidity, ionic strength, and inclination angle of generators. The combination of electric potential and chemical color indicator suggests that charge generation is likely correlated with ion-selective transport in the nanoporous channel during the water infiltration process. And unipolar ions (for instance protons) should be the dominant charge-transfer species. The work reveals the fundamental principles regulating charge generation/transfer during the water-triggered electric generation process.

Electric-Eel-Type Bi-Ionic Gradient Battery

Electric eels generate electricity with a discharge voltage of up to 860 V under ionic gradients, providing a fascinating example to inspire viable and flexible power sources. However, hitherto reported eel-related devices are strictly restricted by complicated fabrication and environmental energy input. Herein, an electric-eel-type bi-ionic gradient battery (BGB) is performed by cationic and anionic polyelectrolyte hydrogels featuring simplified units and self-energy supply. Benefiting from ionic bonds with opposite charges in the polymer chain, bianion gradients as well as ion selective migration pathways are synchronously constructed and integrated units are enabled. As a result, an open-circuit voltage of 0.54 V and a short-circuit current density of 13 μA cm-2 are generated by a BGB unit. Moreover, a voltage output up to 60 V is derived from integrated BGB devices, demonstrating the potential to drive wearable and implantable electronics. In this case, these artificial electric systems could overcome the great challenges of environmentally friendly, biocompatible, low-cost, and soft power sources, providing in-depth insights into the development of clean and sustainable power generation technologies.

A Multifunctional Asymmetric Fabric for Sustained Electricity Generation from Multiple Sources and Simultaneous Solar Steam Generation

Harvesting electrical energy from water and moisture has emerged as a novel ecofriendly energy conversion technology. Herein, a multifunctional asymmetric polyaniline/carbon nanotubes/poly(vinyl alcohol) (APCP) that can produce electric energy from both saline water and moisture and generate fresh water simultaneously is developed. The constructed APCP possesses a negatively charged porous structure that allows continuous generation of protons and ion diffusion through the material, and a hydrophilicity-hydrophobic interface which results in a constant potential difference and sustainable output. A single APCP can maintain stable output for over 130 h and preserve a high voltage of 0.61 V, current of 81 µA, and power density of 82.4 µW cm-3 with 0.15 cm3 unit size in the water-induced electricity generation process. When harvesting moisture energy, the APCP creates dry-wet asymmetries and triggers the spontaneous development of electrical double layer with a current density of 1.25 mA cm-3 , sufficient to power small electronics. A device consisting of four APCP can generate stable electricity of 3.35 V and produce clean water with an evaporation rate of 2.06 kg m-2  h-1 simultaneously. This work provides insights into the fabrication of multifunctional fabrics for multisource energy harvesting and simultaneous solar steam generation.

Ion-Diode-Like Heterojunction for Improving Electricity Generation from Water Droplets by Capillary Infiltration

Water-droplet-based electricity generators are emerging hydrovoltaic technologies that harvest energy from water circulation through strong interactions between water and nanomaterials. However, such devices exhibit poor current performance owing to their unclear driving force (evaporation or infiltration) and undesirable reverse diffusion current. Herein, a water-droplet-based hydrovoltaic electricity generator induced by capillary infiltration with an asymmetric structure composed of a diode-like heterojunction formed by negatively and positively charged materials is fabricated. This device can generate current densities of 160 and 450 µA cm-2 at room temperature and 65 °C, respectively. The heterojunction achieves a rectification ratio of 12, which effectively suppresses the reverse current caused by concentration differences. This results in an improved charge accumulation of ≈60 mC cm-2 in 1000 s, which is three times the value observed in the control device. When the area of the device is increased to 6 cm2 , the current increases linearly to 1 mA, thus demonstrating the scale-up potential of the generator. It has been proven that the streaming potential originates from capillary infiltration, and the presence of ion rectification. The proposed method of constructing ion-diode-like structures provides a new strategy for improving generator performance.

Polymer-Based Hydrogels Applied in Drug Delivery: An Overview

Polymer-based hydrogels are hydrophilic polymer networks with crosslinks widely applied for drug delivery applications because of their ability to hold large amounts of water and biological fluids and control drug release based on their unique physicochemical properties and biocompatibility. Current trends in the development of hydrogel drug delivery systems involve the release of drugs in response to specific triggers such as pH, temperature, or enzymes for targeted drug delivery and to reduce the potential for systemic toxicity. In addition, developing injectable hydrogel formulations that are easily used and sustain drug release during this extended time is a growing interest. Another emerging trend in hydrogel drug delivery is the synthesis of nano hydrogels and other functional substances for improving targeted drug loading and release efficacy. Following these development trends, advanced hydrogels possessing mechanically improved properties, controlled release rates, and biocompatibility is developing as a focus of the field. More complex drug delivery systems such as multi-drug delivery and combination therapies will be developed based on these advancements. In addition, polymer-based hydrogels are gaining increasing attention in personalized medicine because of their ability to be tailored to a specific patient, for example, drug release rates, drug combinations, target-specific drug delivery, improvement of disease treatment effectiveness, and healthcare cost reduction. Overall, hydrogel application is advancing rapidly, towards more efficient and effective drug delivery systems in the future.

Integrated Moist-Thermoelectric Generator for Efficient Waste Steam Energy Utilization

Industrial waste steam is one of the major sources of global energy losses. Therefore, the collection and conversion of waste steam energy into electricity have aroused great interest. Here, a "two-in-one" strategy is reported that combines thermoelectric and moist-electric generation mechanisms for a highly efficient flexible moist-thermoelectric generator (MTEG). The spontaneous adsorption of water molecules and heat in the polyelectrolyte membrane induces the fast dissociation and diffusion of Na⁺ and H⁺ , resulting in the high electricity generation. Thus, the assembled flexible MTEG generates power with a high open-circuit voltage (V_oc ) of 1.81 V (effective area = 1cm² ) and a power density of up to 4.75±0.4 µW cm^-2 . With efficient integration, a 12-unit MTEG can produce a V_oc of 15.97 V, which is superior to most known TEGs and MEGs. The integrated and flexible MTEGs reported herein provide new insights for harvesting energy from industrial waste steam.

High-Performance, Highly Stretchable, Flexible Moist-Electric Generators via Molecular Engineering of Hydrogels

Harvesting energy from ubiquitous moisture has emerged as a promising technology, offering opportunities to power wearable electronics. However, low current density and inadequate stretching limit their integration into self-powered wearables. Herein, a high-performance, highly stretchable, and flexible moist-electric generator (MEG) is developed via molecular engineering of hydrogels. The molecular engineering involves the impregnation of lithium ions and sulfonic acid groups into the polymer molecular chains to create ion-conductive and stretchable hydrogels. This new strategy fully leverages the molecular structure of polymer chains, circumventing the addition of extra elastomers or conductors. A centimeter-sized hydrogel-based MEG can generate an open-circuit voltage of 0.81 V and a short-circuit current density of up to 480 µA cm^-2 . This current density is more than ten times that of most reported MEGs. Moreover, molecular engineering improves the mechanical properties of hydrogels, resulting in a stretchability of 506%, representing the state-of-the-art level in reported MEGs. Notably, large-scale integration of the high-performance and stretchable MEGs is demonstrated to power wearables with integrated electronics, including respiration monitoring masks, smart helmets, and medical suits. This work provides fresh insights into the design of high-performance and stretchable MEGs, facilitating their application to self-powered wearables and broadening the application scenario.

Humidity-Tolerant Moisture-Driven Energy Generator with MXene Aerogel-Organohydrogel Bilayer

Free-standing and film-type moisture-driven energy generators (MEGs) that harness the preferential interaction of ionized moisture with hydrophilic materials are interesting because of their wearability and portability without needing a water container. However, most such MEGs work in limited humidity conditions, which provide a substantial moisture gradient. Herein, we present a high-performance MEG with sustainable power-production capability in a wide range of environments. The bilayer-based device comprises a negatively surface-charged, hydrophilic MXene (Ti₃C₂T_x) aerogel and polyacrylamide (PAM) ionic hydrogel. The preferential selection on the MXene aerogel of positive charges supplied from the salts and water in the hydrogel is predicted by the first-principle simulation, which results in a high electric output in a wide relative humidity range from 20% to 95%. Furthermore, by replacing the hydrogel with an organohydrogel of PAM that has excellent water retention and structural stability, a device with long-term electricity generation is realized for more than 15 days in a broad temperature range (from -20 to 80 °C). Our MXene aerogel MEGs connected in series supply sufficient power for commercial electronic components in various outdoor environments. Moreover, an MXene aerogel MEG works as a self-powered sensor for recognizing finger bending and facial expression.

A Microwave-Assisted, Solvent-Free Approach for the Versatile Functionalization of Carbon Nanotubes

While the functionalization of carbon nanotubes (CNTs) has attracted extensive interest for a wide range of applications, a facial and versatile strategy remains in demand. Here, we report a microwave-assisted, solvent-free approach to directly functionalize CNTs both in raw form and in arbitrary macroscopic assemblies. Rapid microwave irradiation was applied to generate active sites on the CNTs while not inducing excessive damage to the graphitic network, and a gas-phase deposition afforded controllable grafting for thorough or regioselective functionalization. Using methyl methacrylate (MMA) as a model functional group and a CNT sponge as a model assembly, homogeneous grafting was exhibited by the increased robust hydrophobicity (contact angle increase from 30 to 140°) and improved structural stability (compressive modulus increased by 135%). Therefore, when our MMA-functionalized CNTs served as a solar absorber for saline distillation, high operating stability with a superior water evaporation rate of ∼2.6 kg m^-2 h^-1 was observed. Finally, to highlight the efficacy and versatility of this functionalization approach, we fabricated asymmetrically hydrophobic CNT sponges by regioselective functionalization to serve as a moisture-driven generator, which demonstrated a stable open-circuit voltage of 0.6 mV. This versatile, solvent-free approach can complement conventional solution-based techniques in the design and fabrication of multifunctional nanocarbon-based materials.