pH stimuli-responsive poly(acrylamide-co -sodium alginate) hydrogels prepared by γ-radiation for improved compressive strength of concrete

The Influence of the Structural Architecture on the Swelling Kinetics and the Network Behavior of Sodium-Alginate-Based Hydrogels Cross-Linked with Ionizing Radiation

The present work discusses the influence of the structural architecture of sodium alginate-co-acrylic acid-poly(ethylene) oxide hydrogels, crosslinked through electron beam (e-beam) radiation processing. The most important properties of the hydrogels were studied in detail to identify a correlation between the architecture of the hydrogels and their properties. Furthermore, the effect of sodium alginate (NaAlg) concentration, the amounts of the polymer blend, and the size of the samples on hydrogel properties were investigated. The results show that the hydrogels cross-linked (0.5% and 1% NaAlg) with 12.5 kGy exhibit improved physicochemical properties. High gel fraction levels (exceeding 83.5-93.7%) were achieved. Smaller hydrogel diameter (7 mm) contributed to a maximum swelling rate and degree of 20.440%. The hydrogel network was dependent on the hydrogels' diameter and the amount of polymer blend used. The hydrogels best suited the first-order rate constants and exhibited a non-Fickian diffusion character with diffusion exponent values greater than 0.5. This study indicates that the cross-linked hydrogel has good properties, particularly because of its high degree of swelling and extensive stability (more than 180 h) in water. These findings show that hydrogels can be effectively applied to the purification of water contaminated with metals, dyes, or even pharmaceuticals, as well as materials with a gradual release of bioactive chemicals and water retention.

Radiation synthesis of sodium alginate/gelatin based ultra-absorbent hydrogel for efficient water and nitrogen management in wheat under drought stress

The main focus of this study was on using radiation to make an ultra-absorbent hydrogel (UAH) from sodium alginate (SA) and gelatin (GL) biopolymers. This UAH can effectively handle water and nitrogen in wheat farming during drought stress. The hydrogel was synthesized by gamma irradiation-induced SA/GL/polyacrylamide crosslinking at 10-40 kGy. Varying SA/GL ratios affected swelling and the gel fraction of SA/GL/PAm hydrogels. The (SA/GL 17/83) hydrogel exhibited a 40.03 g/g swelling degree, while increasing SA content resulted in higher swelling, peaking at 75.5 g/g for (SA/GL 83/17). This indicated a synergistic interaction between SA and GL. The gel fraction also increased from 76.8 to 90.3%, with a higher GL content reflecting increased crosslinking. After multiple hydrolysis cycles, the hydrogel achieved 1293 (g/g) swelling and 36 days of water retention. When applied to wheat (Triticuma estivum) under drought stress, it significantly improved shoot length (18%), root length (43%), shoot fresh weight (49%), and shoot dry weight (51%) under extreme drought. The significant increases in protein and carbohydrate content in both shoots (up to 32% and 19%, respectively) and grains (up to 21% and 24%, respectively), along with the reduction in proline content (up to 38%), demonstrate that ultra-absorbent hydrogel (UAH) effectively enhances nitrogen content, photosynthesis, and overall plant health in wheat under varying drought stress levels. This novel SA/GL-based UAH holds promise for addressing water scarcity and agricultural challenges, offering a sustainable solution for water and nitrogen management under drought stress.

Efficacious adsorption of divalent nickel ions over sodium alginate-g-poly(acrylamide)/hydrolyzed Luffa cylindrica-CoFe2O4 bionanocomposite hydrogel

Existing Ni2+ heavy metal ions in an aqueous medium are highly hazardous for living organisms and humans. Therefore, designing low-cost adsorbents with enhanced effectiveness is essential for removing nickel ions to safeguard public health. In this study, a novel green nanocomposite hydrogel was synthesized through the free radical solution and bulk polymerization method, and its capability to remove divalent nickel ions from aqueous media was examined. The bionanocomposite hydrogel named as SA-g-poly(AAm)/HL-CoFe2O4 was produced by grafting polyacrylamide (AAm) onto sodium alginate (SA) in the presence of a magnetic composite recognized as HL-CoFe2O4, where HL represents hydrolyzed Luffa Cylindrica. By employing FT-IR, XRD, VSM, SEM, EDX-Map, BET, DLS, HPLC, and TGA techniques, morphological evaluation and characterization of the adsorbents were carried out. The performance of the adsorption process was studied under varying operational conditions including pH, temperature, contact duration, initial concentration of pollutant ions, and adsorbent dosage. HPLC analysis proved the non-toxic structure of the bionanocomposite hydrogel. The number of unreacted acrylamide monomers within the hydrogel matrix was measured at 20.82 mg/kg. The optimum conditions was discovered to be pH = 6, room temperature, adsorbent dosage of 1 of g.L-1, initial Ni2+ concentration of 10 mg.L-1, and contact time of 100 min, and the maximum adsorption efficiency at optimal state was calculated as 70.09, 90.25, and 93.83 % for SA-g-poly (AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples, respectively. Langmuir isotherm model was in good agreement with the experimental data and the maximum adsorption capacity of SA-g-poly(AAm), SA-g-poly(AAm)/HL, and SA-g-poly(AAm)/HL-CoFe2O4 samples was calculated to be 31.37, 43.15, and 45.19 mg.g-1, respectively. The adsorption process, according to kinetic studies, follows a pseudo-second-order kinetic model. Investigations on thermodynamics also demonstrated that the process is exothermic and spontaneous. Exploring the interference effect of co-existing ions showed that the adsorption efficiency has decreased with concentration enhancement of Ca2+ and Na+ cations in aqueous medium. Furthermore, the adsorption/desorption assessments revealed that after 8 consecutive cycles, there had been no noticeable decline in the adsorption effectiveness. Finally, actual wastewater treatment outcomes demonstrated that the bionanocomposite hydrogel successfully removes heavy metal pollutants from shipbuilding industry effluent. Therefore, the findings revealed that the newly fabricated bionanocomposite hydrogel is an efficient, cost-effective, easy-separable, and green adsorbent that could be potentially utilized to remove divalent nickel ions from wastewater.

Fabrication of environmentally safe antifouling coatings using nano-MnO2/cellulose nanofiber composite with BED/GMA irradiated by electron beam

Marine biofouling, undesirable growth of organisms on submerged surfaces, poses significant challenges in various industries and marine applications. The development of environmentally safe antifouling coatings employing nano-MnO2/cellulose nanofiber (CNF) composite with bisphenol A epoxy diacrylate/glycidyl methacrylate (BED/GMA) irradiated by electron beam (T1) has been achieved in the current work. The physico-chemical characteristics of the fabricated coatings have been studied using Fourier transforms infrared spectroscopy, scanning electron microscope, water contact angle, and X-ray diffraction. The efficacy of T1 formulation and pure BED/GMA polymer (T2) in inhibiting biofouling formation was investigated in seawater of Alexandria Eastern Harbour by examining biofilm development morphologically and biochemically. In addition, regular analyses of seawater physicochemical parameters were conducted monthly throughout study. Results provide valuable information on coating performance as well as the complex interactions between coatings, biofilms, and environmental factors. The T1 formulation exhibited strong anti-fouling and anticorrosion properties over 2 months. However, after four months of immersion, all coated steel surfaces, including T1, T2, and T0, were heavily covered with macro-fouling, including tubeworms, barnacles, and algae. Biochemical analysis of extracellular polymeric substances (EPS) showed statistically significant variations in carbohydrates content between the coated surfaces. The T1 formulation showed decreased protein and carbohydrate content in EPS fractions after 14 days of immersion indicating less biofouling. Moreover, elemental analysis showed that carbon, oxygen, and iron were the predominant elements in the biofilm. Other elements such as sodium, silicon, chloride, and calcium were in lower concentrations. T2 and T0 surfaces revealed higher calcium levels and the appearance of sulphur peaks if compared with T1 surface. Diatoms and bacteria were detected on T1, T2, and T0 surfaces. The observed warming of seawater and nutrient-rich conditions were found to promote the growth of fouling organisms, emphasizing the importance of considering environmental factors in biofouling management strategies.

Network interpenetrating slow-release nitrogen fertilizer based on carrageenan and urea: A new low-cost water and fertilizer regulation carrier

Modern agriculture presents new requirements of low cost, high water retention and degradability for superabsorbent and slow-release fertilizers. In this study, carrageenan (CG), acrylic acid (AA), N, N '-methylene diacrylamide (MBA), urea and ammonium persulfate (APS) were used as raw materials. A kind of high water absorption, water retention, nitrogen slow release and biodegradable carrageenan superabsorbent (CG-SA) was prepared by grafting copolymerization. The optimal CG-SA was obtained with a water absorption rate of 680.45 g/g by orthogonal L18(3)7 experiments and single-factor experiments. The water absorption behavior of CG-SA in deionized water and salt solution were studied. The CG-SA was characterized before and after degradation by FTIR, SEM. The nitrogen release behavior and kinetic characteristics of CG-SA were investigated. In addition, CG-SA degraded 58.33 % and 64.35 % in soil at 25 °C and 35 °C after 28 days. All the results indicated that the low-cost and degradable CG-SA can achieve simultaneous slow release of water and nutrients, which is expected to be widely used as a new water-fertilizer integration technology in arid and poor areas.

Preparation of Cell-Loaded Microbeads as Stable and Injectable Delivery Platforms for Tissue Engineering

Cell transplants in therapeutic studies do not preserve their long-term function inside the donor body. In mesenchymal stem cell (MSC) transplants, transplanted cells disperse through the body and are prone to degradation by immune cells after the transplant process. Various strategies, such as usage of the immunosuppressive drugs to eliminate allograft rejection, are designed to increase the efficiency of cell therapy. Another strategy is the construction of biomimetic encapsulates using polymeric materials, which isolate stem cells and protect them from environmental effects. In this study, fibroblasts (L929) and MSCs were investigated for their improved viability and functionality once encapsulated inside the alginate microbeads under in vitro conditions for up to 12 days of incubation. Thus, uniform and injectable (<200 µm) cell-loaded microbeads were constructed by the electrostatically assisted spraying technique. Results showed that both L929 and MSCs cells continue their metabolic activity inside the microbeads during the incubation periods. Glucose consumption and lactic acid production levels of both cell lines were consistently observed. The released cell number on day 12 was found to be increased compared to day 0. Protein expression levels of both groups increased every day with the expected doubling rate. Hence, this strategy with a simple yet clever design to encapsulate either MSCs or L929 cells might outstand as a potential cell delivery platform for cell therapy-based tissue engineering.

Multifunctional Oxidized Succinoglycan/Poly(N-isopropylacrylamide-co-acrylamide) Hydrogels for Drug Delivery

We prepared the self-healing and temperature/pH-responsive hydrogels using oxidized succinoglycan (OSG) and a poly (N-isopropyl acrylamide-co-acrylamide) [P(NIPAM-AM)] copolymer. OSG was synthesized by periodate oxidation of succinoglycan (SG) isolated directly from soil microorganisms, Sinorhizobium meliloti Rm1021. The OSG/P(NIPAM-AM) hydrogels were obtained by introducing OSG into P(NIPAM-AM) networks. The chemical structure and physical properties of these hydrogels were characterized by ATR-FTIR, XRD, TGA, and FE-SEM. The OSG/P(NIPAM-AM) hydrogels showed improved elasticity, increased thermal stability, new self-healing ability, and 4-fold enhanced tensile strength compared with the P(NIPAM-AM) hydrogels. Furthermore, the 5-FU-loaded OSG/P(NIPAM-AM) hydrogels exhibited effective temperature/pH-responsive drug release. Cytotoxicity experiments showed that the OSG/P(NIPAM-AM) hydrogels were non-toxic, suggesting that OSG/P(NIPAM-AM) hydrogels could have the potential for biomedical applications, such as stimuli-responsive drug delivery systems, wound healing, smart scaffolds, and tissue engineering.

Bioactive Edible Sodium Alginate Films Incorporated with Tannic Acid as Antimicrobial and Antioxidative Food Packaging

Currently, biodegradable and functional food packaging materials have attracted more and more attention due to their potential advantages. Biopolymers are one of the promising materials used to produce biodegradable food packaging films, and sodium alginate (SA) is one of the most used polysaccharides. In this work, we explored a novel edible sodium alginate (SA)/tannic acid (TA) film as biodegradable active food packaging material. The impact of TA concentration on the UV light blocking ability, transparency, water vapor barrier ability, mechanical strength, antioxidant, and antimicrobial activity of the SA-TA films was comprehensively investigated. Fourier transform infrared spectroscopy results revealed that strong hydrogen bonding was the main intermolecular interaction between SA and TA. As TA concentration in the films increased, the water vapor permeability (WVP) decreased from 1.24 × 10^-6 to 0.54 × 10^-6 g/m/h/Pa, the DPPH radical scavenging activity increased from 0.008% to 89.02%. Moreover, the incorporation of TA effectively blocked UV light and elevated antimicrobial activity against Escherichia coli. Overall, the SA films with TA exhibited better water vapor barrier ability, remarkable UV-light barrier ability and antioxidant activity while showing a slight decrease in light transmittance. These results indicated the potential application of TA as a functional additive agent for developing multifunctional food packaging materials.

Application of Nano-Inspired Scaffolds-Based Biopolymer Hydrogel for Bone and Periodontal Tissue Regeneration

This review's objectives are to provide an overview of the various kinds of biopolymer hydrogels that are currently used for bone tissue and periodontal tissue regeneration, to list the advantages and disadvantages of using them, to assess how well they might be used for nanoscale fabrication and biofunctionalization, and to describe their production processes and processes for functionalization with active biomolecules. They are applied in conjunction with other materials (such as microparticles (MPs) and nanoparticles (NPs)) and other novel techniques to replicate physiological bone generation more faithfully. Enhancing the biocompatibility of hydrogels created from blends of natural and synthetic biopolymers can result in the creation of the best scaffold match to the extracellular matrix (ECM) for bone and periodontal tissue regeneration. Additionally, adding various nanoparticles can increase the scaffold hydrogel stability and provide a number of biological effects. In this review, the research study of polysaccharide hydrogel as a scaffold will be critical in creating valuable materials for effective bone tissue regeneration, with a future impact predicted in repairing bone defects.

Application of Carrier Materials in Self-Healing Cement-Based Materials Based on Microbial-Induced Mineralization

Microbially induced calcium carbonate precipitation (MICP) technology has attracted widespread research attention owing to its application in crack healing for cement-based materials in an intelligent and environmentally friendly manner. However, the high internal alkalinity, low nutrient content, and dense structure of cement-based materials have restricted its application in self-healing cement-based materials. Various carrier materials have been widely used for the immobilization of microorganisms in recent years. Carrier materials have significantly increased the ability of microorganisms to withstand extreme conditions (high temperature, high alkali, etc.) and have provided new ideas for the compatibility of microorganisms with cement-based materials. In this study, the basic principles of microbial self-healing technology in cement-based materials and microbial immobilization methods and the influencing factors are introduced, followed by a review of the research progress and application effects of different types of carrier materials, such as aggregate, low-alkali cementitious materials, organic materials, and microcapsules. Finally, the current problems and promising development directions of microbial carrier materials are summarized to provide useful references for the future development of microbial carriers and self-healing cement-based materials.

Jammed Micro-Flake Hydrogel for Four-Dimensional Living Cell Bioprinting

4D bioprinting is promising to build cell-laden constructs (bioconstructs) with complex geometries and functions for tissue/organ regeneration applications. The development of hydrogel-based 4D bioinks, especially those allowing living cell printing, with easy preparation, defined composition, and controlled physical properties is critically important for 4D bioprinting. Here, a single-component jammed micro-flake hydrogel (MFH) system with heterogeneous size distribution, which differs from the conventional granular microgel, has been developed as a new cell-laden bioink for 4D bioprinting. This jammed cytocompatible MFH features scalable production and straightforward composition with shear-thinning, shear-yielding, and rapid self-healing properties. As such, it can be smoothly printed into stable 3D bioconstructs, which can be further cross-linked to form a gradient in cross-linking density when a photoinitiator and a UV absorber are incorporated. After being subject to shape morphing, a variety of complex bioconstructs with well-defined configurations and high cell viability are obtained. Based on this system, 4D cartilage-like tissue formation is demonstrated as a proof-of-concept. The establishment of this versatile new 4D bioink system may open up a number of applications in tissue engineering.

4D biofabrication via instantly generated graded hydrogel scaffolds

Formation of graded biomaterials to render shape-morphing scaffolds for 4D biofabrication holds great promise in fabrication of complex structures and the recapitulation of critical dynamics for tissue/organ regeneration. Here we describe a facile generation of an adjustable and robust gradient using a single- or multi-material one-step fabrication strategy for 4D biofabrication. By simply photocrosslinking a mixed solution of a photocrosslinkable polymer macromer, photoinitiator (PI), UV absorber and live cells, a cell-laden gradient hydrogel with pre-programmable deformation can be generated. Gradient formation was demonstrated in various polymers including poly(ethylene glycol) (PEG), alginate, and gelatin derivatives using various UV absorbers that present overlap in UV spectrum with that of the PI UV absorbance spectrum. Moreover, this simple and effective method was used as a universal platform to integrate with other hydrogel-engineering techniques such as photomask-aided microfabrication, photo-patterning, ion-transfer printing, and 3D bioprinting to fabricate more advanced cell-laden scaffold structures. Lastly, proof-of-concept 4D tissue engineering was demonstrated in a study of 4D bone-like tissue formation. The strategy's simplicity along with its versatility paves a new way in solving the hurdle of achieving temporal shape changes in cell-laden single-component hydrogel scaffolds and may expedite the development of 4D biofabricated constructs for biological applications.

pH-Triggered, Synbiotic Hydrogel Beads for In Vivo Therapy of Iron Deficiency Anemia and Reduced Inflammatory Response

Iron deficiency anemia (IDA) is the most common nutritional disorder worldwide nearly affecting two billion people. The efficacies of conventional oral iron supplements are mixed, intravenous iron administration acquaintances with finite but crucial risks. Usually, only 5-20% iron is absorbed in the duodenum while the remaining fraction reaches the colon, affecting the gut microbes and can significantly impact intestinal inflammatory responses. Therefore, administration of gut bacterial modulators such as probiotics, prebiotics, and any other dietary molecules that can stimulate healthy gut bacteria can enhance iron absorption without any adverse side effects. In this study, we have prepared an iron supplement to avoid the side effects of conventional oral iron supplements. The formulation includes co-encapsulation of iron with anti-inflammatory probiotic bacteria within alginate/starch hydrogels (B + I-Dex (H)), which has been demonstrated to be efficient in mitigating IDA in vivo. As intestinal pH increases, the pore size of hydrogel increases due to ionic interactions and thus releases the encapsulated bacteria and iron. The field emission scanning electron microscopy (FESEM) analysis confirmed the porous structure of hydrogel beads, and in vitro release studies showed a sustained release of iron and bacteria at intestinal pH. The hydrogel was found to be nontoxic and biocompatible in Caco2 cell lines. The formulation showed efficient in vitro and in vivo iron bioavailability in Fe depletion-repletion studies. B + I-Dex (H) was observed to generate less inflammatory response than FeSO₄ or nonencapsulated iron dextran (I-Dex) in vivo. We entrust that this duly functional hydrogel formulation could be further utilized or modified for the development of oral therapeutics for IDA.

Synthesis and Evaluation of AlgNa-g-Poly(QCL-co-HEMA) Hydrogels as Platform for Chondrocyte Proliferation and Controlled Release of Betamethasone

Hydrogels obtained from combining different polymers are an interesting strategy for developing controlled release system platforms and tissue engineering scaffolds. In this study, the applicability of sodium alginate-g-(QCL-co-HEMA) hydrogels for these biomedical applications was evaluated. Hydrogels were synthesized by free-radical polymerization using a different concentration of the components. The hydrogels were characterized by Fourier transform-infrared spectroscopy, scanning electron microscopy, and a swelling degree. Betamethasone release as well as the in vitro cytocompatibility with chondrocytes and fibroblast cells were also evaluated. Scanning electron microscopy confirmed the porous surface morphology of the hydrogels in all cases. The swelling percent was determined at a different pH and was observed to be pH-sensitive. The controlled release behavior of betamethasone from the matrices was investigated in PBS media (pH = 7.4) and the drug was released in a controlled manner for up to 8 h. Human chondrocytes and fibroblasts were cultured on the hydrogels. The MTS assay showed that almost all hydrogels are cytocompatibles and an increase of proliferation in both cell types after one week of incubation was observed by the Live/Dead^® assay. These results demonstrate that these hydrogels are attractive materials for pharmaceutical and biomedical applications due to their characteristics, their release kinetics, and biocompatibility.

Alginate enriched with phytic acid for hydrogels preparation

Alginate hydrogels are extremely versatile and flexible biomaterials, with an enormous potential for bio-applications use. Their similarity with extracellular matrix is a key factor in their performance for cell and tissue regeneration. In this study superabsorbent high porous hydrogels based on sodium alginate physical crosslinked with a natural crosslinker compound namely phytic acid were prepared and evaluated from the viewpoint of their specific properties. The resulting hydrogels obtained with different ratios between alginate and phytic acid were characterized by Fourier transform infrared spectroscopy technique, scanning electron microscopy, XRD measurements, swelling tests in physiological environment, and thermal analysis by using a simultaneous TG/FT-IR/MS system. There are put into evidence the differences in physico-chemical properties of the hydrogels in relation with their composition, which endows them tunable properties and versatility.

Preparation of internally-crosslinked alginate microspheres: Optimization of process parameters and study of pH-responsive behaviors

In this study, the effects of various parameters of the water-in-oil emulsification/internal gelation method on the properties of calcium-alginate microparticles were evaluated and optimized. Results showed that the spherical-shaped microparticles with the highest circularity and high production yield can be produced by alginate solution with a concentration of 2 wt.%, calcium carbonate/alginate ratio of 10/1 (w/w), water/oil volume ratio of 1/20, emulsifier concentration of 5 % (v/v), and emulsification speed of 1000 rpm. Two model drugs including simvastatin lactone and simvastatin β-hydroxyacid were loaded into the microspheres with promising encapsulation efficiencies of 73 % and 69 %, respectively. The microspheres showed a pH-responsive swelling behavior with a percentage of 10.60 %, 352.65 %, 690.03 %, and 1211.46 % at the pH values of 2.0, 4.5, 7.4, and 8.5, respectively. The microspheres showed an increasing trend of release rate in direct proportion to pH. These findings would be useful for therapeutic applications which need pH-responsive drug carriers.

An Ultrastable Na-Zn Solid-State Hybrid Battery Enabled by a Robust Dual-Cross-linked Polymer Electrolyte

This work proposes a dual-cross-linked gel solid electrolyte (SE), here defined as Zn-re-inforced sodium alginate-polyacrylamide SE (Zn-reinforced SA-PAM SE), in which Na⁺ and Zn²⁺ coexist. The SE shows a high conductivity of 19.74 mS cm^-1. Compared to the pure PAM gel, the tensile strength and compressive strength of Zn-reinforced SA-PAM SE are significantly enhanced to be 674.28 kPa and 16.29 MPa, respectively, because of the strengthening mechanism of Zn²⁺ cross-linked SA. Based on such a robust electrolyte, a novel hybrid cell is developed by involving Na_0.5FeFe(CN)₆-carbon nanotube composites (PB@CNT) as the Na⁺ intercalation-type cathode and metallic Zn as the plating anode. The hybrid cell shows an extremely high stability for 10,000 cycles with a record little capacity loss of 0.0027% per cycle, as Zn-reinforced SA-PAM SE successfully inhibits free water molecules from occupying low-spinning metallic sites (Fe-C) in Na_0.5FeFe(CN)₆. Ex situ X-ray photoelectron spectroscopy reveals that the dissolution of Na_0.5FeFe(CN)₆ is highly reduced by 79.5%. It is further noted that the corrosion and dendrites at the Zn²⁺/Zn plating anode are greatly hindered for the robust electrolyte. This work gives a pathway for the development of new aqueous ion batteries.