Voltage-induced payload release and wettability control on TiO2 and TiO2 nanotubes

Customizing Wettability of Defect-Rich CeO2/TiO2 Nanotube Arrays for Humidity-Resistant, Ultrafast, and Sensitive Ammonia Response

In all their applications, gas sensors should satisfy several requirements, including low cost, reduced energy consumption, fast response/recovery, high sensitivity, and reliability in a broad humidity range. Unfortunately, the fast response/recovery and sensing reliability under high humidity conditions are often still missing, especially those working at room temperature. In this study, a humidity-resistant gas sensor with an ultrafast response/recovery rate was designed by integrating a defect-rich semiconducting sensing interface and a self-assembled monolayer (SAM) with controllable wettability. As a proof-of-concept application, ammonia (NH3), one of the atmospheric and indoor pollutants, was selected as the target gas. The decoration of interconnected defective CeO2 nanowires on spaced TiO2 nanotube arrays (NTAs) provided superior NH3 sensing performances. Moreover, we showed that manipulating the functional end group of SAMs is an efficient and simple method to adjust the wettability, by which 86% sensitivity retention with an ultrafast response (within 5 s) and a low limit of detection (45 ppb) were achieved even at 75% relative humidity and room temperature. This work provides a new route toward the comprehensive design and application of metal oxide semiconductors for trace gas monitoring under harsh conditions, such as those of agricultural, environmental, and industrial fields.

Efficient Electrochemical Oxidation of Chloramphenicol by Novel Reduced TiO2 Nanotube Array Anodes: Kinetics, Reaction Parameters, Degradation Pathway and Biotoxicity Forecast

The key component of electrochemical advanced oxidation technology are high-efficiency anodes, and highly efficient and simple-to-prepare materials have generated a lot of interest. In this study, novel self-supported Ti³⁺-doped titanium dioxide nanotube arrays (R-TNTs) anodes were successfully prepared by a two-step anodic oxidation and straightforward electrochemical reduction technique. The electrochemical reduction self-doping treatment produced more Ti³⁺ sites with stronger absorption in the UV-vis region, a band gap reduction from 2.86 to 2.48 ev, and a significant increase in electron transport rate. The electrochemical degradation effect of R-TNTs electrode on chloramphenicol (CAP) simulated wastewater was investigated. At pH = 5, current density of 8 mA cm^-2, electrolyte concentration of 0.1 M sodium sulfate (Na₂SO₄), initial CAP concentration of 10 mg L^-1, CAP degradation efficiency exceeded 95% after 40 min. In addition, molecular probe experiments and electron paramagnetic resonance (EPR) tests revealed that the active species were mainly •OH and SO₄^-, among which •OH played a major role. The CAP degradation intermediates were discovered using high-performance liquid chromatography-mass spectrometry (HPLC-MS), and three possible degradation mechanisms were postulated. In cycling experiments, the R-TNTs anode demonstrated good stability. The R-TNTs prepared in this paper were an anode electrocatalytic material with high catalytic activity and stability, which could provide a new approach for the preparation of electrochemical anode materials for difficult-to-degrade organic compounds.

Plasmon-Mediated Peroxidase-like Activity on an Asymmetric Nanotube Architecture for Rapid Visual Detection of Bacteria

Rapid and sensitive detection of bacteria from a complex real media remains a challenge. Herein, we report a visual bacterial sensing assay with excellent specificity, anti-interference ability, and sensitivity based on a surface plasmon resonance (SPR)-enhanced peroxidase (POD) mimetic. The POD mimetic based on Pt nanoparticles (NPs) asymmetrically decorated on Au/TiO₂ magnetic nanotubes (Au/Pt/MTNTs) is designed by combining the intrinsic photocatalytic activity of TiO₂ and the limited transport depth of light. It is revealed that the localized surface plasmon resonance (LSPR) effect of the asymmetric nanotubes is more effective in facilitating the generation of hot electrons, which are subsequently transferred to Pt and MTNTs, thus greatly promoting the catalytic performance. Using Staphylococcus aureus (S. aureus) as a model of Gram-positive bacteria, the dependence of the colorimetric reaction on the active sites of the POD mimetic is used for the sensing of target bacteria. Owing to the specific recognition between S. aureus and peptide, the fluorescein isothiocyanate (FITC) labeled peptide probes are captured by S. aureus and removed from the Au/Pt/MTNTs, leading to the recovery of POD-like activity and fluorescence emission of S. aureus. Particularly, benefiting from the Au-SPR effect and the magnetic feature of the Au/Pt/MTNTs, the recovery of catalytic activity induced an improved colorimetric assay with a wider linear response for S. aureus qualification and a detection limit of four cells, as well as satisfactory selectivity and feasibility for application in real samples. The plasmon-enhanced POD activity would provide a simple-yet-effective approach to achieve a colorimetric bioassay with high efficiency and sensitivity. This asymmetric design can also be utilized to engineer nanozymes in colorimetric assays for the specific detection of biotoxins, biomarkers, and cancer cells.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Activation and characterization of environmental catalysts in plasma-catalysis: Status and challenges

Plasma-catalysis has attracted great attentions in environmental/energy-related fields, but the synergetic mechanism still suffers intractable defects. Key issues are that what kind of catalysts are applicable for plasma system, how are they activated in plasma, and how to characterize them in plasma. This review systematically gives a comprehensive summarization of the selection of catalysts and its activation mechanism in plasma, based on the character of plasma, including physical effects containing the enhancement of discharge intensity and adsorption of reactants, and the utilization of plasma-generated active species such as·O, heat, O₃, ultraviolet light and e* . Focus is given to the illumination of the activation mechanisms of catalysts when placed in plasma zone. Subsequently, the novel characterization techniques for catalysts, which may associate properties to performance, are critically overviewed. The challenges and opportunities for the activation and characterizations of catalysts are proposed, and future perspectives are suggested about where the efforts should be made. It is expected that a bridge between catalysts design and character of plasma can be built to shed light on the synergetic mechanism for plasma-catalysis and design of new plasma-catalysis systems.

Unraveling the Surface Hydroxyl Network on In2O3 Nanoparticles with High-Field Ultrafast Magic Angle Spinning Nuclear Magnetic Resonance Spectroscopy

Hydroxyl groups are among the major active surface sites over metal oxides. However, their spectroscopic characterizations have been challenging due to limited resolutions, especially on hydroxyl-rich surfaces where strong hydroxyl networks are present. Here, using nanostructured In₂O₃ as an example, we show significantly enhanced discrimination of the surface hydroxyl groups, owing to the high-resolution ¹H NMR spectra performed at a high magnetic field (18.8 T) and a fast magic angle spinning (MAS) of up to 60 kHz. A total of nine kinds of hydroxyl groups were distinguished and their assignments (μ₁, μ₂, and μ₃) were further identified with the assistance of ¹⁷O NMR. The spatial distribution of these hydroxyl groups was further explored via two-dimensional (2D) ¹H-¹H homonuclear correlation experiments with which the complex surface hydroxyl network was unraveled at the atomic level. Moreover, the quantitative analysis of these hydroxyl groups with such high resolution enables further investigations into the physicochemical property and catalytic performance characterizations (in CO₂ reduction) of these hydroxyl groups. This work provides insightful understanding on the surface structure/property of the In₂O₃ nanoparticles and, importantly, may prompt general applications of high-field ultrafast MAS NMR techniques in the study of hydroxyl-rich surfaces on other metal oxide materials.

Energizing periodic mesoporous organosilica (PMOS) with bismuth and cerium for photo-degrading methylene blue and methyl orange in water

This work reported an efficient catalyst to reduce the organic pollutants by using an energetic periodic mesoporous organosilica (PMOS) supported with bismuth (Bi-PMOS) and cerium (Ce-PMOS). PMOS support was designed through co-condensation of sodium silicate and 3-methacryloxypropyltrimethoxysilane on polysorbate templates. The resultant PMOSs were fabricated with bismuth and cerium oxides to formulate Bi-PMOS and Ce-PMOS, respectively. These materials showed photo-degradations of methylene blue (MB, 74.7% and 41.1% with Bi-PMOS and Ce-PMOS, respectively) and methyl orange (MO, 53.2% and 39.4% with Bi-PMOS and Ce-PMOS, respectively). Such efficient photo-degradations were attributed to the precise doping of metallic nodes of Bi₂ O₃ and CeO₂ on the porous structure of PMOS with high surface area. The results also showed that Bi and Ce were more effective in PMOS support for photo-degradation of dyes as the support provides more lifetime to photo-generated electron-hole pairs than other materials. Moreover, active reusability and high degradation efficiencies of Bi-PMOS and Ce-PMOS proved them better analytical tools to reduce organic pollutants under visible lights. PRACTITIONER POINTS: The oxides of bismuth and cerium have impressive photocatalytic characteristics. New material energizing mesoporous organosilica with bismuth and cerium for photo-degradation of methylene blue and methyl orange in water. The use of an efficient catalyst to reduce the organic pollutants by using an energetic periodic mesoporous organosilica (PMOS) supported with bismuth (Bi-PMOS) and cerium (Ce-PMOS).

Mechanistic insights into 2,4-D photoelectrocatalytic removal from water with TiO2 nanotubes under dark and solar light irradiation

Removal of recalcitrant pollutants from water is a major challenge, to which the photoelectrocatalytic processes may be a solution. Applied potential plays a key role in the photocatalytic activity of the semiconductor. This paper investigated the effect of applied potential on the photoelectrocatalytic oxidation of 2,4-Dichlorophenoxyacetic acid (2,4-D) with TiO₂ nanotubular anodes under solar light irradiation. The process was investigated at constant potentials in different regions of the polarization curve: the ohmic region, the saturation region and in the region of the Schottky barrier breakdown. PEC tests were performed in aqueous solutions of 2,4-D, and in the presence of methanol or formic acid, as scavengers of OH^• radicals and holes. Results showed the main mechanism is oxidation by OH^• radicals from water oxidation, while runs with hole scavenger revealed a second mechanism of direct oxidation by holes photogenerated at the electrode surface, with high removal rates due to current doubling effect.

Advancing of titanium medical implants by surface engineering: recent progress and challenges

Introduction:Titanium (Ti) and their alloys are used as main implant materials in orthopedics and dentistry for decades having superior mechanical properties, chemical stability and biocompatibility. Their rejections due lack of biointegration and bacterial infection are concerning with considerable healthcare costs and impacts on patients. To address these limitations, conventional Ti implants need improvements where the use of surface nanoengineering approaches and the development of a new generation of implants are recognized as promising strategies.Areas covered:This review presents an overview of recent progress on the application of surface engineering methods to advance Ti implants enable to address their key limitations. Several promising surface engineering strategies are presented and critically discussed to generate advanced surface properties and nano-topographies (tubular, porous, pillars) able not only to improve their biointegration, antibacterial performances, but also to provide multiple functions such as drug delivery, therapy, sensing, communication and health monitoring underpinning the development of new generation and smart medical implants.Expert opinion:Recent advances in cell biology, materials science, nanotechnology and additive manufacturing has progressively influencing improvements of conventional Ti implants toward the development of the next generation of implants with improved performances and multifunctionality. Current research and development are in early stage, but progressing with promising results and examples of moving into in-vivo studies an translation into real applications.

NIR Light-Driven Photocatalysis on Amphiphilic TiO2 Nanotubes for Controllable Drug Release

Titanium dioxide (TiO₂) nanomaterials have attracted much interest in life science and biological fields because of their excellent photocatalytic activity and good biocompatibility. However, owing to its wide band gap, photocatalysis of TiO₂ can be only triggered by UV light. The limited transparent depth of UV light and the generated reactive oxygen species (ROSs) cause inflammation response of skin tissue, thus posing two major challenges in the photocatalytic application of TiO₂-based materials in drug delivery and other biotechnology fields. Here, we propose an upconversion-related strategy to enable the photocatalytic activity of TiO₂ nanotubes in near-infrared light and apply the system as a controllable drug delivery platform. More importantly, the ROS-induced cytotoxicity and the preleaching of payloads are significantly reduced on the as-proposed amphiphilic TiO₂ nanotubes. The hydrophobic monolayers are served as a "cap" to provide protection for ROS-induced inflammation and long-term storability. This amphiphilic drug delivery system broadens the potential applications of TiO₂-based nanomaterials in biomedicine.

Insights into Theranostic Properties of Titanium Dioxide for Nanomedicine

Titanium dioxide (TiO2) nanostructures exhibit a broad range of theranostic properties that make them attractive for biomedical applications. TiO2 nanostructures promise to improve current theranostic strategies by leveraging the enhanced quantum confinement, thermal conversion, specific surface area, and surface activity. This review highlights certain important aspects of fabrication strategies, which are employed to generate multifunctional TiO2 nanostructures, while outlining post-fabrication techniques with an emphasis on their suitability for nanomedicine. The biodistribution, toxicity, biocompatibility, cellular adhesion, and endocytosis of these nanostructures, when exposed to biological microenvironments, are examined in regard to their geometry, size, and surface chemistry. The final section focuses on recent biomedical applications of TiO2 nanostructures, specifically evaluating therapeutic delivery, photodynamic and sonodynamic therapy, bioimaging, biosensing, tissue regeneration, as well as chronic wound healing.

Visible light driven CuBi2O4/Bi2MoO6 p-n heterojunction with enhanced photocatalytic inactivation of E. coli and mechanism insight

Here, a novel CuBi₂O₄/Bi₂MoO₆ (CBO/BMO) p-n heterojunction was fabricated and exhibited markedly improved photocatalytic inactivation capacity of E. coli cells under visible light excitation (λ > 420 nm) compared with pure CuBi₂O₄ and Bi₂MoO₆. The CBO/BMO-0.5 hybrid displayed the highest photoinactivation ability which could completely inactivate the E. coli cellswithin 4 h. The mechanism of photocatalytic disinfection towards E. coli of CBO/BMO heterojunctions was attributed to the disruption of cell-membrane, leakage and damage of cellular content including total protein and DNA as verified with SEM, fluorescence-base dead/live stain, sodium dodecyl sulfate polyacrylamide gel electropheresis (SDS-PAGE) and agarose gel electrophoresis (AGE). Additionally, the scavenge experiments showed that the reactive species h⁺, e^- and •O_2^-play the predominant role in the photocatalytic system of CBO/BMO hybrids. The improved photocatalytic activity of CBO/BMO composites was mainly attributed to the promotion of spatial separation and migration rate of photoproduced electron-hole pairs, enhancement of visible light absorption and more generation of reactive species (•O₂^-) on the interface of catalyst and water which was demonstrated by nitroblue tetrazolium (NBT) and EPR. Our work indicated that construction of CuBi₂O₄/Bi₂MoO₆ p-n heterostructure photocatalyst is a promising environmental friendly alternative method to deal with the biohazards of pathogenic microorganisms.

Electrochemical Engineering of Nanoporous Materials for Photocatalysis: Fundamentals, Advances, and Perspectives

Photocatalysis comprises a variety of light-driven processes in which solar energy is converted into green chemical energy to drive reactions such as water splitting for hydrogen energy generation, degradation of environmental pollutants, CO2 reduction and NH3 production. Electrochemically engineered nanoporous materials are attractive photocatalyst platforms for a plethora of applications due to their large effective surface area, highly controllable and tuneable light-harvesting capabilities, efficient charge carrier separation and enhanced diffusion of reactive species. Such tailor-made nanoporous substrates with rational chemical and structural designs provide new exciting opportunities to develop advanced optical semiconductor structures capable of performing precise and versatile control over light–matter interactions to harness electromagnetic waves with unprecedented high efficiency and selectivity for photocatalysis. This review introduces fundamental developments and recent advances of electrochemically engineered nanoporous materials and their application as platforms for photocatalysis, with a final prospective outlook about this dynamic field.

Engineered titanium implants for localized drug delivery: recent advances and perspectives of Titania nanotubes arrays

INTRODUCTION

Therapeutics delivery to bones to treat skeletal diseases or prevent postsurgical infections is challenging due to complex and solid bone structure that limits blood supply and diffusion of therapeutics administered by systemic routes to reach effective concentration. Titanium (Ti) and their alloys are employed as mainstream implant materials in orthopedics and dentistry; having superior mechanical/biocompatibility properties which could provide an alternative solution to address this problem.

AREAS COVERED

This review presents an overview of recent development of Ti drug-releasing implants, with emphasis on nanoengineered Titania nanotubes (TNTs) structures, for solving key problems to improve implants osseointegration, overcome inflammation and infection together with providing localized drug delivery (LDD) for bone diseases including cancer. Critical analysis of the advantages/disadvantages of developed concepts is discussed, their drug loading/releasing performances and specific applications.

EXPERT OPINION

LDD to bones can address many disorders and postsurgical conditions such as inflammation, implants rejection and infection. To this end, TNTs-Ti implants represent a potential promise for the development of new generation of multifunctional implants with drug release functions. Even this concept is extensively explored recently, there is a strong need for more preclinical studies using animal models to confirm the long-term safety and stability of TNTs-Ti implants for real-life medical applications.

Catalyst-Doped Anodic TiO2 Nanotubes: Binder-Free Electrodes for (Photo)Electrochemical Reactions

Nanotubes of the transition metal oxide, TiO2, prepared by electrochemical anodization have been investigated and utilized in many fields because of their specific physical and chemical properties. However, the usage of bare anodic TiO2 nanotubes in (photo)electrochemical reactions is limited by their higher charge transfer resistance and higher bandgaps than those of semiconductor or metal catalysts. In this review, we describe several techniques for doping TiO2 nanotubes with suitable catalysts or active materials to overcome the insulating properties of TiO2 and enhance its charge transfer reaction, and we suggest anodization parameters for the formation of TiO2 nanotubes. We then focus on the (photo)electrochemistry and photocatalysis-related applications of catalyst-doped anodic TiO2 nanotubes grown on Ti foil, including water electrolysis, photocatalysis, and solar cells. We also discuss key examples of the effects of doping and the resulting improvements in the efficiency of doped TiO2 electrodes for the desired (photo)electrochemical reactions.

Polyacrylamide exotemplate-assisted synthesis of hierarchically porous nanostructured TiO2 macrobeads for efficient photodegradation of organic dyes and microbes

Nano/microscale TiO2 materials and their composites have reached the pinnacle of their photocatalytic performances to destroy persistent organic pollutants and waterborne microorganisms, but their practical applications are limited by the drawbacks associated with their stability, leaching, processing and separation. To overcome these shortcomings, we have prepared hierarchically porous nanostructured TiO2 macrobeads via an exotemplating or nanocasting strategy by infiltrating the TiO2 sol into the emulsion-templated porous polyacrylamide scaffold followed by its gelation, drying and calcination. The nanoscale TiO2 building units tailor the shape of the porous polymeric network after calcination thereby retaining the macroscale morphology of polymer beads after template removal. A novel combination of the hierarchical macroporosity, orderly crystalline anatase nature, nanoscale feature and good surface area revealed by the relevant characterization tools makes these TiO2 scaffolds particularly effective for superior degradation of methylene blue with the enhanced rate constant and efficient disinfection of E. coli and S. aureus under UV light. The macrosize and mechanical stability of these purely TiO2 beaded architectures have several potential advantages over conventional TiO2 nanocomposites and slurry systems to address the inherent bottlenecks of secondary contamination, difficult operation and energy-intensive post-recovery processes that are indeed deemed to be the barriers to develop practically useful water treatment technologies.

Deep Oxidation of NO by a Hybrid System of Plasma-N-Type Semiconductors: High-Energy Electron-Activated "Pseudo Photocatalysis" Behavior

A "pseudo photocatalysis" process, being initiated between plasma and N-type semiconductors in the absence of light, was investigated for NO removal for the first time via dynamic probing of reaction processes by FT-IR spectra. It was demonstrated that N-type semiconductor catalysts could be activated to produce electron-hole (e^--h⁺) pairs by the collision of high-energy electrons (e*) from plasma. Due to the synergy of plasma and N-type semiconductors, major changes were noted in the conversion pathways and products. NO can be directly converted to NO₂^- and NO₃^- instead of toxic NO₂, owing to the formation of O₂^- and ·OH present in catalysts. New species like O₃ or ·O may be generated from the interaction between catalyst-induced species and radicals in plasma at a higher SIE, leading to deep oxidation of existing NO₂ to N₂O₅. Experiments with added trapping agents confirmed the contribution of e^- and h⁺ from catalysts. A series of possible reactions were proposed to describe reaction pathways and the mechanism of this synergistic effect. We established a novel system and realized an e*-activated "pseudo photocatalysis" behavior, facilitating the deep degradation of NO. We expect that this new strategy would provide a new idea for in-depth analysis of plasma-activated catalysis phenomenon.

Cobalt-Doped Black TiO2 Nanotube Array as a Stable Anode for Oxygen Evolution and Electrochemical Wastewater Treatment

TiO₂ has long been recognized as a stable and reusable photocatalyst for water splitting and pollution control. However, it is an inefficient anode material in the absence of photoactivation due to its low electron conductivity. To overcome this limitation, a series of conductive TiO₂ nanotube array electrodes have been developed. Even though nanotube arrays are effective for electrochemical oxidation initially, deactivation is often observed within a few hours. To overcome the problem of deactivation, we have synthesized cobalt-doped Black-TiO₂ nanotube array (Co-Black NTA) electrodes that are stable for more than 200 h of continuous operation in a NaClO₄ electrolyte at 10 mA cm^–2. Using X-ray photoelectron spectroscopy, X-ray absorption spectroscopy, electron paramagnetic resonance spectroscopy, and DFT simulations, we are able to show that bulk oxygen vacancies (O_v) are the primary source of the enhanced conductivity of Co-Black. Cobalt doping both creates and stabilizes surficial oxygen vacancies, O_v, and thus prevents surface passivation. The Co-Black electrodes outperform dimensionally stable IrO₂ anodes (DSA) in the electrolytic oxidation of organic-rich wastewater. Increasing the loading of Co leads to the formation of a CoO_x film on top of Co-Black electrode. The CoO_x/Co-Black composite electrode was found to have a lower OER overpotential (352 mV) in comparison to a DSA IrO₂ (434 mV) electrode and a stability that is greater than 200 h in a 1.0 M KOH electrolyte at a current density of 10 mA cm^–2.

A study on the transfer of photo-excited charge carriers within direct and inverted type-I heterojunctions of CdS and ZnS QDs

Wave function engineering for fast charge carrier separation/slow recombination in reverse type-I core/shell QDs for solar photocatalysis.

Co4N Nanowires: Noble-Metal-Free Peroxidase Mimetic with Excellent Salt- and Temperature-Resistant Abilities

Compared to natural enzymes, nanomaterial-based artificial enzymes have attracted immense attention because of their high stability and cost-effectiveness. In this study, cobalt nitride (Co₄N) as a noble-metal-free artificial enzyme exhibiting highly intrinsic peroxidase-like activity and good stability was reported. Kinetic studies revealed that the resultant Co₄N nanowires (NWs) exhibited a stronger affinity for 3,3',5,5'-tetramethylbenzidine (TMB) and H₂O₂ than HRP. Compared to Co₃O₄ NWs, Co₄N NWs exhibited highly improved catalytic activities, with H₂O₂ exhibiting an apparent K_m approximately 2 orders of magnitude less than that of Co₃O₄. In particular, the peroxidase-like activity of Co₄N was maintained well over a wide range of temperatures and ionic strength. A Co₄N-based method was further developed for the detection of glucose with good sensitivity and reliability. Because of advantages such as easy storage, cost-effectiveness, high sensitivity, and outstanding stability, Co₄N NWs demonstrate the potential for replacing noble-metal-based peroxidase mimetics in a wide range of promising applications.

A Close Look at the Structure of the TiO2-APTES Interface in Hybrid Nanomaterials and Its Degradation Pathway: An Experimental and Theoretical Study

The surface functionalization of TiO₂-based materials with alkylsilanes is attractive in several cutting-edge applications, such as photovoltaics, sensors, and nanocarriers for the controlled release of bioactive molecules. (3-Aminopropyl)triethoxysilane (APTES) is able to self-assemble to form monolayers on TiO₂ surfaces, but its adsorption geometry and solar-induced photodegradation pathways are not well understood. We here employ advanced experimental (XPS, NEXAFS, AFM, HR-TEM, and FT-IR) and theoretical (plane-wave DFT) tools to investigate the preferential interaction mode of APTES on anatase TiO₂. We demonstrate that monomeric APTES chemisorption should proceed through covalent Si-O-Ti bonds. Although dimerization of the silane through Si-O-Si bonds is possible, further polymerization on the surface is scarcely probable. Terminal amino groups are expected to be partially involved in strong charge-assisted hydrogen bonds with surface hydroxyl groups of TiO₂, resulting in a reduced propensity to react with other species. Solar-induced mineralization proceeds through preferential cleavage of the alkyl groups, leading to the rapid loss of the terminal NH₂ moieties, whereas the Si-bearing head of APTES undergoes slower oxidation and remains bound to the surface. The suitability of employing the silane as a linker with other chemical species is discussed in the context of controlled degradation of APTES monolayers for drug release and surface patterning.

Recent advances on smart TiO2 nanotube platforms for sustainable drug delivery applications

To address the limitations of traditional drug delivery, TiO2 nanotubes (TNTs) are recognized as a promising material for localized drug delivery systems. With regard to the excellent biocompatibility and physicochemical properties, TNTs prepared by a facile electrochemical anodizing process have been used to fabricate new drug-releasing implants for localized drug delivery. This review discusses the development of TNTs applied in localized drug delivery systems, focusing on several approaches to control drug release, including the regulation of the dimensions of TNTs, modification of internal chemical characteristics, adjusting pore openings by biopolymer coatings, and employing polymeric micelles as drug nanocarriers. Furthermore, rational strategies on external conditions-triggered stimuli-responsive drug release for localized drug delivery systems are highlighted. Finally, the review concludes with the recent advances on TNTs for controlled drug delivery and corresponding prospects in the future.

Aligned metal oxide nanotube arrays: key-aspects of anodic TiO2 nanotube formation and properties

Over the past ten years, self-aligned TiO₂ nanotubes have attracted tremendous scientific and technological interest due to their anticipated impact on energy conversion, environment remediation and biocompatibility. In the present manuscript, we review fundamental principles that govern the self-organized initiation of anodic TiO₂ nanotubes. We start with the fundamental question: why is self-organization taking place? We illustrate the inherent key mechanistic aspects that lead to tube growth in various different morphologies, such as ripple-walled tubes, smooth tubes, stacks and bamboo-type tubes, and importantly the formation of double-walled TiO₂ nanotubes versus single-walled tubes, and the drastic difference in their physical and chemical properties. We show how both double- and single-walled tube layers can be detached from the metallic substrate and exploited for the preparation of robust self-standing membranes. Finally, we show how by selecting specific growth approaches to TiO₂ nanotubes desired functional features can be significantly improved, e.g., enhanced electron mobility, intrinsic doping, or crystallization into pure anatase at high temperatures can be achieved. Finally, we briefly outline the impact of property, modifications and morphology on functional uses of self-organized nanotubes for most important applications.

TiO2 nanotube platforms for smart drug delivery: a review

Titania nanotube (TNT) arrays are recognized as promising materials for localized drug delivery implants because of their excellent properties and facile preparation process. This review highlights the concept of localized drug delivery systems based on TNTs, considering their outstanding biocompatibility in a series of ex vivo and in vivo studies. Considering the safety of TNT implants in the host body, studies of the biocompatibility present significant importance for the clinical application of TNT implants. Toward smart TNT platforms for sustainable drug delivery, several advanced approaches were presented in this review, including controlled release triggered by temperature, light, radiofrequency magnetism, and ultrasonic stimulation. Moreover, TNT implants used in medical therapy have been demonstrated by various examples including dentistry, orthopedic implants, cardiovascular stents, and so on. Finally, a future perspective of TNTs for clinical applications is provided.

Carbon-Decorated TiO2 Nanotube Membranes: A Renewable Nanofilter for Charge-Selective Enrichment of Proteins

In this work, we design a TiO2 nanomembrane (TiNM) that can be used as a nanofilter platform for selective enrichment of specific proteins. After a first use, the photocatalytic properties of TiO2 allow the decomposition of unwanted remnants on the substrate and thus make the platform reusable. To construct this platform, we fabricate a free-standing TiO2 nanotube array and remove the bottom oxide to form a both-end-open TiNM. By pyrolysis of the natural tube wall contamination, the walls become decorated with graphitic carbon patches (C/TiNM). Owing to the large surface area, the amphiphilic nature and the charge-adjustable character, this C/TiNM can be used to extract and enrich hydrophobic charged biomolecules. Using human serum albumin (HSA) as a model protein as well as protein mixtures, we show that the composite membrane exhibits a highly enhanced loading capacity and protein selectivity and is reusable after a short UV treatment.

Recent Advances in TiO2 -Based Nanostructured Surfaces with Controllable Wettability and Adhesion

Bioinspired surfaces with special wettability and adhesion have attracted great interest in both fundamental research and industry applications. Various kinds of special wetting surfaces have been constructed by adjusting the topographical structure and chemical composition. Here, recent progress of the artificial superhydrophobic surfaces with high contrast in solid/liquid adhesion has been reviewed, with a focus on the bioinspired construction and applications of one-dimensional (1D) TiO2-based surfaces. In addition, the significant applications related to artificial super-wetting/antiwetting TiO2-based structure surfaces with controllable adhesion are summarized, e.g., self-cleaning, friction reduction, anti-fogging/icing, microfluidic manipulation, fog/water collection, oil/water separation, anti-bioadhesion, and micro-templates for patterning. Finally, the current challenges and future prospects of this renascent and rapidly developing field, especially with regard to 1D TiO2-based surfaces with special wettability and adhesion, are proposed and discussed.

Carbon-dot-decorated TiO₂ nanotube arrays used for photo/voltage-induced organic pollutant degradation and the inactivation of bacteria

Photoluminescent carbon dots (c-dots) have recently attracted growing interest as a new member of the carbon-nanomaterial family. Here, we report for the first time that c-dot-decorated TiO2 nanotube arrays (c-dot/TiNTs) exhibit highly enhanced abilities regarding photo/voltage-induced organic pollutant degradation and bacterial inactivation. By applying UV irradiation (365 nm) or an electrochemical potential over 3 V (versus Ag/AgCl), an organic dye and a herbicide were efficiently degraded. Moreover, the inactivation of Gram-positive S. aureus and Gram-negative E. coli bacteria was realized on a c-dot/TiNT film. The c-dots were able to absorb light efficiently resulting in multiple exciton generation and also a reduction in the recombination of the e(-)/h(+) pair produced in c-dot/TiNT film during photo/voltage-induced degradation. It was also possible to readily regenerate the surface using ultraviolet light irradiation, leaving the whole film structure undamaged and with high reproducibility and stability.

Graphitic C3 N4 -Sensitized TiO2 Nanotube Layers: A Visible-Light Activated Efficient Metal-Free Antimicrobial Platform

Herein, we use a facile procedure to graft a thin graphitic C3N4 (g-C3N4) layer on aligned TiO2 nanotube arrays (TiNT) by a one-step chemical vapor deposition (CVD) approach. This provides a platform to enhance the visible-light response of TiO2 nanotubes for antimicrobial applications. The formed g-C3N4/TiNT binary nanocomposite exhibits excellent bactericidal efficiency against Escherichia coli (E. coli) as a visible-light activated antibacterial coating, without the use of additional bactericides.

A facile and novel strategy to synthesize reduced TiO₂ nanotubes photoelectrode for photoelectrocatalytic degradation of diclofenac

TiO2 nano-materials have been considered as a versatile candidate for the photoelectrochemical (PECH) applications. In this study, we reported a facile and novel strategy to synthesize reduced TiO2 nanotubes (TiO2 NTs) photoelectrode. The microwave reduction could introduce oxygen vacancy in the lattice of TiO2, while the rapid-production of oxygen vacancy facilitated the generation of impurity level between the forbidden band and greatly enhancement of visible light absorption, thereby resulting in an improved separation efficiency of photogenerated charge carriers and photocatalytic (PC) performance. Additionally, the derived valence band X-ray photoelectron spectroscopy (VBXPS) and photoluminescence (PL) spectra confirmed the existence of oxygen vacancy in the lattice of TiO2 NTs photoelectrode, in which the valence bond maximum (VBM) and charge carriers concentration of reduced TiO2 NTs photoelectrode was determined to be 1.75 eV and 5.36 × 10(19) cm(-3), respectively. Furthermore, the scavenging experiments revealed that ·OH radical was the dominated species for the degradation of diclofenac. The enhanced-visible-light PC mechanism could mainly be attributed to the generation of oxygen vacancy, which can provide not only the visible light absorption capacity but also charge separation efficiency.