Oxidation of 5-Hydroxymethylfurfural into 2,5-Diformylfuran on Alkali Doped Ru/C Catalysts. Electron Properties of Ruthenium Species as Descriptor of Catalytic Activity

Selective aerobic oxidation of 5-hydroxymethylfurfural into 2,5-diformylfuran has been achieved on alkali doped Ru/C catalyst. Optimization of Ru metal nanoparticles, as well as the nature and amount of the alkali dopant have been performed. The results showed that doping the Ru/C catalyst with controlled amount of potassium increases the catalytic activity, 2.5 fold with respect to the non-doped sample. Spectroscopic studies showed that these differences in activity can be attributed to a different oxidation reaction mechanism associated to the presence of electron rich Ru species in the promoted sample that facilitate the dissociation of O2, while prevents the oxidation of the metal. The Ru/C-K doped catalyst resulted very stable against leaching and metal sintering, being possible the reuse over several consecutive runs. Moreover, the catalyst could be successfully applied to the oxidation of different alcohols.

Experimental Reactivity of (MoO3)NO- (N = 1-21) Cluster Anions with C1-C4 Alkanes: A Simple Model to Predict the Reactivity with Methane

Metal oxide clusters with atomic oxygen radical anions are important model systems to study the mechanisms of activating and transforming very stable alkane molecules under ambient conditions. It is extremely challenging to characterize the activation and conversion of methane, the most stable alkane molecule, by metal oxide cluster anions due to the low reactivity of the anionic species. In this study, using a ship-lock type reactor that could be run at relatively high pressure conditions to provide a high number of collisions in ion-molecule reactions, the rate constants of the reactions between (MoO3)NO- (N = 1-21) cluster anions and the light alkanes (C1-C4) were measured under thermal collision conditions. The relationships among the reaction rates of different alkanes were obtained to establish a model to predict the low rate constants with methane from the high rate constants with C2-C4 alkanes. The model was tested by using available experimental results in literature. This study provides a new method to estimate the relatively low reactivity of atomic oxygen radical anions with methane on metal oxide clusters.

A Nano-Autophagy Inhibitor Triggering Reciprocal Feedback Control of Cholesterol Depletion for Solid Tumor Therapy

Solid tumors are characterized by enhanced metabolism of lipid, particularly cholesterol, inspiring the exploration of metabolic therapy through cholesterol oxidase (COD)-mediated cholesterol deprivation. However, the therapeutic efficacy of COD is limited due to the hypoxic tumor microenvironment and the protective autophagy triggered by cholesterol deprivation. Herein, a combination therapy for metabolically treating solid tumors through COD in conjunction with molybdenum oxide nanodots (MONDs), which serve as both potent oxygen generators and autophagy inhibitors, is reported. MONDs convert H2 O2 (arising from COD-mediated cholesterol oxidation) into O2 , which is then recycled by COD to form reciprocal feedback for cholesterol depletion. Concurrently, MONDs can overcome autophagy-induced therapeutic resistance frequently occurring in conventional nutrient deprivation therapy by activating AKT/mTOR pathway phosphorylation. Combination therapy in the xenograft model results in an ≈5-fold increase in therapeutic efficiency as compared with COD treatment alone. This functionally cooperative metabolic coupling strategy holds great promise as a novel polytherapy approach that will benefit patients with solid tumors.

Pyridinic Nitrogen Sites Dominated Coordinative Engineering of Subnanometric Pd Clusters for Efficient Alkynes' Semihydrogenation

Supported metal catalysts have played an important role in optimizing selective semihydrogenation of alkynes for fine chemicals. There into, nitrogen-doped carbons, as a type of promising support materials, have attracted extensive attentions. However, due to the general phenomenon of random doping for nitrogen species in the support, it is still atremendous challenge to finely identify which nitrogen configuration dominates the catalytic property of alkynes' semihydrogenation. Herein, it is reported that uniform mesoporous N-doped carbon spheres derived from mesoporous polypyrrole spheres are used as supports to immobilized subnanometric Pd clusters, which provide a particular platform to research the influence of nitrogen configurations on the alkynes' semihydrogenation. Comprehensive experimental results and density functional theory calculation indicate that pyridinic nitrogen configuration dominates the catalytic behavior of Pd clusters. The high contents of pyridinic nitrogen sites offer abundant coordination sites, which greatly reduces the energy barrier of the rate-determining reaction step and makes Pd clusters own high catalytic activity. The electron effect between pyridinic nitrogen sites and Pd clusters makes the reaction highly selective. Additionally, the good mesostructures also promote the fast transport of substrate. Based on the above, catalyst Pd@PPy-600 exhibits high catalytic activity (99%) and selectivity (96%) for phenylacetylene (C₈ H₆ ) semihydrogenation.

Controlled growth of a high selectivity interface for seawater electrolysis

Overall seawater electrolysis is an important direction for the development of hydrogen energy conversion. The key issues include how to achieve high selectivity, activity, and stability in seawater electrolysis reactions. In this report, the heterostructures of graphdiyne-RhO_x-graphdiyne (GDY/RhO_x/GDY) were constructed by in situ-controlled growth of GDY on RhO_x nanocrystals. A double layer interface of sp-hybridized carbon-oxide-Rhodium (sp-C∼O-Rh) was formed in this system. The microstructures at the interface are composed of active sites of sp-C∼O-Rh. The obvious electron-withdrawing surface enhances the catalytic activity with orders of magnitude, while the GDY outer of the metal oxides guarantees the stability. The electron-donating and withdrawing sp-C∼O-Rh structures enhance the catalytic activity, achieving high-performance overall seawater electrolysis with very small cell voltages of 1.42 and 1.52 V at large current densities of 10 and 500 mA cm^-2 at room temperatures and ambient pressures, respectively. The compositional and structural superiority of the GDY-derived sp-C-metal-oxide active center offers great opportunities to engineer tunable redox properties and catalytic performance for seawater electrolysis and beyond. This is a typical successful example of the rational design of catalytic systems.

Visible and NIR Light Assistance of the N2 Reduction to NH3 Catalyzed by Cs-promoted Ru Nanoparticles Supported on Strontium Titanate

NH₃ production accounts for more than 1% of the total CO₂ emissions and is considered one of the most energy-intensive industrial processes currently (T > 400 °C and P > 80 bars). The development of atmospheric-pressure N₂ fixation to NH₃ under mild conditions is attracting much attention, especially using additional renewable energy sources. Herein, efficient photothermal NH₃ evolution in continuous flow upon visible and NIR light irradiation at near 1 Sun power using Cs-decorated strontium titanate-supported Ru nanoparticles is reported. Notably, for the optimal photocatalytic composition, a constant NH₃ rate near 3500 μmol_NH3 g_catalyst^–1 h^–1 was achieved for 120 h reactions, being among the highest values reported at atmospheric pressure under 1 Sun irradiation.

Modulating the Chemical Microenvironment of Pt Nanoparticles within Ultrathin Nanosheets of Isoreticular MOFs for Enhanced Catalytic Activity

The catalytic activity of metal nanoparticles (MNPs) embedded in metal-organic frameworks (MOFs) is affected by the electronic interactions between MNPs and MOFs. In this report, we fabricate a series of ultrathin nanosheets of isoreticular MOFs (NMOFs) with different metal nodes as supports and successfully encapsulate Pt NPs within these NMOFs, affording Pt@NMOF-Co, Pt@NMOF-Ni₁Co₁, Pt@NMOF-Ni₃Co₁, and Pt@NMOF-Ni nanocomposites. The microchemical environment on the surface of Pt NPs can be modulated by varying the metal nodes of NMOFs. The catalytic activity of the nanocomposites toward liquid-phase hydrogenation of 1-hexene shows obvious difference, in which Pt@NMOF-Ni possesses the highest activity followed by Pt@NMOF-Ni₃Co₁, Pt@NMOF-Ni₁Co₁, and Pt@NMOF-Co in a decreasing order of activity. Obviously, increasing gradually the amount of Ni²⁺ nodes in the carriers can improve the catalytic activity. The difference of catalytic activity of the nanocomposites might originate from the distinct electron interactions between Pt NPs and NMOFs, as ascertained by X-ray photoelectron spectroscopy spectrum and density functional theory calculations. This work provides a rare example that the catalytic activity of MNPs could be controlled by accurately regulating the microchemical environment using ultrathin NMOFs as supports.

Surface ligands enhance the catalytic activity of supported Au nanoparticles for the aerobic α-oxidation of amines to amides

The catalytic aerobic α-oxidation of amines in water is an atom economic and green alternative to current methods of amide synthesis. The reaction uses O2 as terminal oxidant, avoids hazardous...

Direct deoxygenation of active allylic alcohols via metal-free catalysis

Direct metal-free deoxygenation of highly active allylic alcohols catalyzed by a Brønsted acid was achieved, which avoids tedious reaction steps and eliminates metal contamination. By examining a series of Brønsted...

Methane Activation by (MoO3 )5 O- Cluster Anions: The Importance of Orbital Orientation

The reactivity of the molybdenum oxide cluster anion (MoO₃ )₅ O^- , bearing an unpaired electron at a bridging oxygen atom (O_b ^.- ), towards methane under thermal collision conditions has been studied by mass spectrometry and density functional theory calculations. This reaction follows the mechanism of hydrogen atom transfer (HAT) and is facilitated by the O_b ^.- radical center. The reactivity of (MoO₃ )₅ O^- can be traced back to the appropriate orientation of the lowest unoccupied molecular orbitals (LUMO) that is essentially the 2p orbital of the O_b ^.- atom. This study not only makes up the blank of thermal methane activation by the O_b ^.- radical on negatively charged clusters but also yields new insights into methane activation by the atomic oxygen radical anions.

Nanoparticles Supported on Sub-Nanometer Oxide Films: Scaling Model Systems to Bulk Materials

Ultrathin layers of oxides deposited on atomically flat metal surfaces have been shown to significantly influence the electronic structure of the underlying metal, which in turn alters the catalytic performance. Upscaling of the specifically designed architectures as required for technical utilization of the effect has yet not been achieved. Here, we apply liquid crystalline phases of fluorohectorite nanosheets to fabricate such architectures in bulk. Synthetic sodium fluorohectorite, a layered silicate, when immersed into water spontaneously and repulsively swells to produce nematic suspensions of individual negatively charged nanosheets separated to more than 60 nm, while retaining parallel orientation. Into these galleries oppositely charged palladium nanoparticles were intercalated whereupon the galleries collapse. Individual and separated Pd nanoparticles were thus captured and sandwiched between nanosheets. As suggested by the model systems, the resulting catalyst performed better in the oxidation of carbon monoxide than the same Pd nanoparticles supported on external surfaces of hectorite or on a conventional Al2 O3 support. XPS confirmed a shift of Pd 3d electrons to higher energies upon coverage of Pd nanoparticles with nanosheets to which we attribute the improved catalytic performance. DFT calculations showed increasing positive charge on Pd weakened CO adsorption and this way damped CO poisoning.

Nanopartikel auf subnanometer dünnen oxidischen Filmen: Skalierung von Modellsystemen

Durch die Abscheidung von ultradünnen Oxidschichten auf atomar‐flachen Metalloberflächen konnte die elektronische Struktur des Metalls und hierdurch dessen katalytische Aktivität beeinflusst werden. Die Skalierung dieser Architekturen für eine technische Nutzbarkeit war bisher aber kaum möglich. Durch die Verwendung einer flüssigkristallinen Phase aus Fluorhectorit‐Nanoschichten, können wir solche Architekturen in skalierbarem Maßstab imitieren. Synthetischer Natriumfluorhectorit (NaHec) quillt spontan und repulsiv in Wasser zu einer nematischen flüssigkristallinen Phase aus individuellen Nanoschichten. Diese tragen eine permanente negative Schichtladung, sodass selbst bei einer Separation von über 60 nm eine parallele Anordnung der Schichten behalten wird. Zwischen diesen Nanoschichten können Palladium‐Nanopartikel mit entgegengesetzter Ladung eingelagert werden, wodurch die nematische Phase kollabiert und separierte Nanopartikel zwischen den Schichten fixiert werden. Die Aktivität zur CO‐Oxidation des so entstandenen Katalysators war höher als z. B. die der gleichen Nanopartikel auf konventionellem Al2O3 oder der externen Oberfläche von NaHec. Durch Röntgenphotoelektronenspektroskopie konnte eine Verschiebung der Pd‐3d‐Elektronen zu höheren Bindungsenergien beobachtet werden, womit die erhöhte Aktivität erklärt werden kann. Berechnungen zeigten, dass mit erhöhter positiver Ladung des Pd die Adsorptionsstärke von CO erniedrigt und damit auch die Vergiftung durch CO vermindert wird.

Lattice-Refined Transition-Metal Oxides via Ball Milling for Boosted Catalytic Oxidation Performance

Surface oxygen vacancy can greatly affect the properties of transition-metal oxides. However, engineering oxygen vacancy-abundant transition-metal oxides with high specific surface area (SSA) remains challenging. At present, the generation of oxygen vacancies in metal oxides is time-consuming and less environmentally friendly by chemical leaching methods that usually require additional waste treatment. Herein, a series of oxygen vacancy-abundant transition-metal oxides with high SSA are constructed via a lattice refining strategy. This strategy is realized by urea-assisted ball milling pyrolysis and is green, efficient, and universal. The oxygen vacancies promote the mobility of oxygen, leading to a boosted catalytic oxidation performance of aromatic sulfides. Such a strategy provides an efficient approach to manufacturing oxygen vacancies on transition-metal oxides, which may be beneficial for various related applications as an effective catalytic material.

Control of Catalytic Activity of Nano-Au through Tailoring the Fermi Level of Support

The catalytic properties of nanometals are strongly dependent on their electronic states which, are influenced by the interaction with the supports. However, a precise manipulation of the electronic interaction is lacking, and the nature of the interaction is still ambiguous. Herein, using Au/ZnFe_x Co_{2- x} O₄ (x = 0-2) as a model system with continuously tuned Fermi levels of supports, the electronic structure of the Au catalyst can be precisely controlled by changing the Fermi level of the support, which arises from the charge redistribution between the two phases. A higher Fermi level of ZnFe₂ O₄ support makes nano-Au negatively charged and thus facilitates the oxidation of CO, and in contrast, a lower Fermi level of ZnCo₂ O₄ support makes nano-Au positively charged and is preferential to the oxidation of benzyl alcohol. This work represents a solid step towards exploration of advanced catalysts with deliberate design of electronic structure and catalytic properties.

A hybrid composite of hydroxyapatite and Ca-Al layered double hydroxide supported Au nanoparticles for highly efficient base-free aerobic oxidation of glucose

In this work, a new hybrid composite of hydroxyapatite and Ca-Al layered double hydroxide (HAP-LDH) was successfully assembled via an in situ growth route, by which large quantities of small needle-like HAP crystals in situ grew over the lateral surface of large platelet-like CaAl-LDH particles, and applied to immobilize Au nanoparticles for base-free aerobic glucose oxidation in water to produce gluconic acid using molecular oxygen. A combination of characterization techniques and catalytic experiments revealed that the activity of supported Au catalysts was strongly associated with the composition of supports, and the hybrid HAP-LDH supported one with a Au loading amount of about 0.2 wt% delivered a high gluconic acid yield of >98% under optimal reaction conditions, along with a quite high turnover frequency value of ∼20 225 h-1. High efficiency of the as-formed Au/HAP-LDH was mainly ascribed to cooperation between favorable surface Au species (Au0/Auδ+) and abundant basic sites. Furthermore, the present catalyst also presented good structural stability, because of the novel hybrid three-dimensional nano/microstructure of the HAP-LDH composite support facilitating the stabilization of active Au species and components of the support. The present synthesis strategy of employing a hybrid composite support provides a new way to design stable and high-performance supported metal nanocatalysts for a variety of advanced heterogeneous catalytic processes.

Electronic synergism of pyridinic- and graphitic-nitrogen on N-doped carbons for the oxygen reduction reaction

Prydinic and graphitic nitrogen both contributes to the activity for oxygen reduction reaction (ORR).

Nitrogen-doped carbon materials (NCs) are extensively studied for the oxygen reduction reaction (ORR). However, the nature of active sites of pyridinic nitrogen (N_P) or graphitic nitrogen (N_G) on NCs is still under debate. Herein, we demonstrated that the ORR activity of NCs in alkaline media depended on the electronic synergism between N_P and N_G, rather than any single type of N. We measured the transferable electrons of NCs by absorption spectroscopy using 7′7′8′8-tetracyanoquinodimethane as an electron acceptor. The transferable electron amount of NCs is relevant to either N_P or N_G, leading to the [N_P] : [N_G] ratio as an electron transfer descriptor of NCs in a reverse volcano curve manner across nineteen NCs. The similar dependence of ORR activity on the [N_P] : [N_G] ratio of NCs was also discovered, demonstrating the synergistic effect of N_P and N_G. These results provide a new angle to understand the nature of ORR activity of NCs and optimize the ORR catalyst.

Defect-rich Ni–Ti layered double hydroxide as a highly efficient support for Au nanoparticles in base-free and solvent-free selective oxidation of benzyl alcohol

Defect-rich Ni–Ti layered double hydroxide supported Au nanoparticles exhibited greatly enhanced activity in the oxidation of benzyl alcohol.

Selective Hydrogenolysis of Glycerol to 1,3-Propanediol: Manipulating the Frustrated Lewis Pairs by Introducing Gold to Pt/WOx

A highly dispersed Au and Pt catalyst supported on WO_x was developed for high performance in the selective hydrogenolysis of glycerol to 1,3-propanediol (1,3-PD) under very mild reaction conditions (81.4 % glycerol conversion, 51.6 % 1,3-PD selectivity at 413 K, 1 MPa H₂ ). The highly dispersed Au decreased the original surface Lewis-acid sites on Pt/WO_x but greatly increased its in situ generated Brønsted-acid sites with the assistance of H₂ through the formation of frustrated Lewis pairs. These in situ formed and spatially separated pairs of H⁺ and H^- function as the active sites in glycerol conversion to 1,3-PD.

Modulation of the catalytic activity of Pt nanoparticles through charge-transfer interactions with metal–organic frameworks

A charge transfer interaction between Pt nanoparticles and MOFs modulated the catalytic activity of Pt for a CO oxidation reaction.

Heterogeneously Catalyzed Hydrothermal Processing of C5-C6 Sugars

Biomass has been long exploited as an anthropogenic energy source; however, the 21st century challenges of energy security and climate change are driving resurgence in its utilization both as a renewable alternative to fossil fuels and as a sustainable carbon feedstock for chemicals production. Deconstruction of cellulose and hemicellulose carbohydrate polymers into their constituent C₅ and C₆ sugars, and subsequent heterogeneously catalyzed transformations, offer the promise of unlocking diverse oxygenates such as furfural, 5-hydroxymethylfurfural, xylitol, sorbitol, mannitol, and gluconic acid as biorefinery platform chemicals. Here, we review recent advances in the design and development of catalysts and processes for C₅-C₆ sugar reforming into chemical intermediates and products, and highlight the challenges of aqueous phase operation and catalyst evaluation, in addition to process considerations such as solvent and reactor selection.

Nearly atomic precise gold nanoclusters on nickel-based layered double hydroxides for extraordinarily efficient aerobic oxidation of alcohols

Nearly atomic precise Au₂₅/Ni_xAl-LDH catalysts obtained via adsorption of Au₂₅Capt₁₈ onto predispersed Ni_xAl-LDH following proper calcination show extraordinary alcohol oxidation property due to ultrafine Au cluster, ordered LDH layer and strong Au₂₅–LDH synergy.

A heterostructured TiO2–C3N4 support for gold catalysts: a superior preferential oxidation of CO in the presence of H2 under visible light irradiation and without visible light irradiation

Introducing C₃N₄ into Au/TiO₂ promotes an increase in the electron densities of Au, resulting in the activation of CO and O₂.

Efficient Synthesis of Amides and Esters from Alcohols under Aerobic Ambient Conditions Catalyzed by a Au/Mesoporous Al2 O3 Nanocatalyst

An efficient heterogeneous Au/mesoporous alumina nanocatalyst has been successfully developed for the synthesis of amides and esters from simple building blocks of readily available alcohols and amines. The processes were simple and were performed at room temperature and atmospheric pressure of O2 to form the desired products with up to 97 % isolated yield. The ability of Au/mesoporous alumina to catalyze these reactions under ambient conditions further enhances the sustainability of these chemical processes. Furthermore, the nanocatalyst was stable to air and water and could be recovered and reused easily. The enhanced catalytic activity of Au/mesoporous alumina might be attributed to the presence of negatively charged Au nanoparticles that could promote oxidation processes as well as the stability of the mesoporous alumina support calcined at a high temperature of 800 °C.

Selective oxidation of n-butanol using gold-palladium supported nanoparticles under base-free conditions

The base-free selective catalytic oxidation of n-butanol by O2 in an aqueous phase has been studied using Au-Pd bimetallic nanoparticles supported on titania. Au-Pd/TiO2 catalysts were prepared by different methods: wet impregnation, physical mixing, deposition-precipitation and sol immobilisation. The sol immobilisation technique, which used polyvinyl alcohol (PVA) as the stabilizing agent, gave the catalyst with the smallest average particle size and the highest stable activity and selectivity towards butyric acid. Increasing the amount of PVA resulted in a decrease in the size of the nanoparticles. However, it also reduced activity by limiting the accessibility of reactants to the active sites. Heating the catalyst to reflux with water at 90 °C for 1 h was the best method to enhance the surface exposure of the nanoparticles without affecting their size, as determined by TEM, X-ray photoelectron spectroscopy and CO chemisorption analysis. This catalyst was not only active and selective towards butyric acid but was also stable under the operating conditions.

Flower-like Au/Ni–Al hydrotalcite with hierarchical pore structure as a multifunctional catalyst for catalytic oxidation of alcohol

Flower-like hierarchical Au/NiAl-LDH catalysts were synthesized for selective oxidation of alcohols.