CH Bond Functionalization: Emerging Synthetic Tools for Natural Products and Pharmaceuticals

Direct photocatalytic C-H functionalization mediated by a molybdenum dioxo complex

Direct photocatalytic C-H activation mediated by MoO2Cl2(bpy-tBu), a unique photoactive metal OXO, is presented. The limiting step, reoxidation to the Mo dioxo, is evaluated and proposed to occur via a key Cl- loss event. Photocatalyst degradation occurs upon substitution of bpy-tBu with H2O generated during catalysis.

Reactions of cyclonickelated complexes with hydroxylamines and TEMPO˙: isolation of new TEMPOH adducts of Ni(II) and their reactivities with nucleophiles and oxidants

This contribution describes a study on the reactivities of the complexes [{κP,κC-(i-Pr)2PO-Ar}Ni(μ-Br)]2, 1a-d (Ar: C6H4, a; 3-Cl-C6H3, b; 3-OMe-C6H3, c; 4-OMe-napthalenyl, d), with hydroxylamines in the presence of TEMPO˙ (TEMPO˙ = (2,2,6,6-tetramethylpiperidinyl-1-yl)oxyl). The results of this study showed that treating 1a-d with a mixture of Et2NOH and TEMPO˙ did not afford the desired oxidation-induced functionalization of the Ni-aryl moiety in 1a-d, giving instead the corresponding κO-TEMPOH adducts [{κP,κC-(i-Pr)2PO-Ar}Ni(Br)(κO-TEMPOH)], 3a-d (TEMPOH = N-hydroxy-2,2,6,6-tetramethylpiperidine). The TEMPOH moiety in these zwitterionic compounds 3 can be displaced by a large excess of acetonitrile (MeCN), 10 equiv. of morpholine, or 1-2 equivalents of imidazole. Although these reactions have given the authenticated products [{κP,κC-(i-Pr)2PO-C6H4}Ni(Br)(NCMe)], 4a, [{κP,κC-(i-Pr)2PO-C6H4}Ni(Br)(morpholine)], 5a, and [{κP,κC-(i-Pr)2PO-C6H4}Ni(imidazole)2]Br, 6a, a few other products were also detected by NMR, indicating that the observed reactivities are far more complex than simple substitution of the TEMPOH moiety. Similarly, treating 3a with AgOC(O)CF3 results in the isolation of [{κP,κC-(i-Pr)2PO-C6H4}Ni{OC(O)CF3}(κO-TEMPOH)], 7a, arising from the substitution of the bromo ligand, whereas spectroscopic evidence suggests further reactivity, possibly including displacement of TEMPOH and oxidative decomposition.

Iron-Catalyzed Photoredox Alcohol α-C-H Alkylation and Tandem Intramolecular Cyclization: Facile Access to Multisubstituted 2,3-Dihydrofurans and γ-Butyrolactones

Multisubstituted furans occupy a pivotal position within the realms of synthetic chemistry and pharmacological science due to their distinctive chemical configurations and inherent properties. We herein introduce a tandem difunctionalization protocol of alcohols for the efficient synthesis of multisubstituted 2,3-dihydrofurans and γ-butyrolactones through the combination of photocatalysis and iron catalysis under mild conditions. Photoredox alcohol α-C(sp3)-H activation and Pinner-type intramolecular cyclization are two key processes. This method features significant convenience, economic benefits, and environmental friendliness.

Thiobenzoic Acid-Catalyzed Cα-H Cross Coupling of Benzyl Alcohols with α-Ketoacid Derivatives

The C-H alkylation of benzyl alcohols with α-ketoacid derivatives was achieved in the presence of thiobenzoic acid with or without Ru or Ir photoredox catalysts. The thiobenzoic acid serves as a photoexcited single-electron reducing reagent and a hydrogen atom transfer catalyst, while addition of the metal photoredox catalyst assists the electron transfer and improves the reaction efficiency. Various functional groups were tolerant of the reaction conditions, and sterically hindered diols were produced in good to high yield.

Palladium nanoparticles for the synthesis of phenanthridinones and benzo[c]chromenes via C-H activation reaction

In the present work, derivatives of phenanthridine-6(5H)-ones and benzo[c]chromenes were efficiently prepared through an intramolecular C-H bond functionalization reaction catalyzed by photochemically synthesized Pd-PVP nanoparticles. The heterocycles were obtained via intramolecular arylation of the corresponding N-methyl-N-aryl-2-halobenzamide or aryl-(2-halo)benzyl ethers using K2CO3 as base in a mixture of H2O : DMA as solvent without additives or ligands. High yields of the heterocyclic compounds were achieved (up to 95%) using a moderately low catalyst loading (1-5 mol%) under an air atmosphere at 100 °C. The reaction exhibited very good tolerance to diverse functional groups (OMe, Me, t Bu, Ph, OCF3, CF3, F, Cl, -CN, Naph), and both bromine and iodine substrates showed great reactivity. Finally, the in vitro antiproliferative activity of phenanthridine-6(5H)-ones and benzo[c]chromenes was evaluated against six human solid tumor cell lines. The more active compounds exhibit activity in the low micromolar range. 1-Isopropyl-4-methyl-6H-benzo[c]chromene was identified as the best compound with promising values of activity (GI50 range 3.9-8.6 μM). Thus, the benzochromene core was highlighted as a novel organic building block to prepare potential antitumor agents.

Rh(III)-Catalyzed C-H Activation/Annulation for the Construction of Quinolizinones and Indolizines

A catalytic-condition-controlled synthesis strategy was reported to build quinolizinone and indolizine derivatives from the easily available enamide and triazole substrates with high regioselectivity and good functional group tolerance. More especially, this transformation has successfully fulfilled a C-H bond activation of terminal olefin from enamides followed by a [3 + 3] and a [2 + 3] cyclization cascade under different catalytic conditions, respectively, to provide two kinds of potentially biologically active heterocyclic scaffolds with a ring-junction nitrogen atom. Mechanistically, the methoxyamine formyl group serves as either a traceless directing group (DG) or an oxidizing DG via the C-N and C-C cleavage in this protocol.

Unimolecular Fragment Coupling: A New Bond-Forming Methodology via the Deletion of Atom(s)

Unimolecular fragment coupling (UFC) is defined as a reaction format, wherein atom(s) located in the middle of a molecule are extruded, and the remaining fragments are coupled. UFC is a potentially powerful strategy that is an alternative to transition-metal-catalyzed cross-coupling because the target chemical bond is formed in an intramolecular fashion, which is inherently beneficial for chemoselectivity and stereoselectivity issues. In this Perspective, we will present an overview of the recent advances in UFC reactions, which encompass those proceeding through the elimination of CO2, CO, SO2, isocyanates, N2, or single atoms primarily via transition metal catalysis.

Rhodium-catalyzed three-component C(sp3)/C(sp2)-H activation enabled by a two-fold directing group strategy

Rh-catalyzed three-component C(sp3)/C(sp2)-H activation has been achieved through a two-directing group strategy. This protocol provides a convenient and efficient pathway for the construction of diverse 8-alkyl quinoline derivatives in one-pot. Furthermore, mechanistic studies revealed that the first C-H amidation was significantly faster than the sequential C-H alkylation.

C(sp3)-H cyclizations of 2-(2-vinyl)phenoxy-tert-anilines

1,5-hydride transfer-triggered cyclization reactions offering a robust method for C(sp3)-C(sp3) coupling and the synthesis of e.g. tetrahydroquinolines have been thoroughly investigated in the literature. Catalysts allowing milder reaction conditions or the development of enantioselective processes were important recent contributions to the field, as well as the studies on subtrates with oxygen or sulfur heteroatoms (besides the originally described nitrogen heterocycles). In a series of studies, we focused on expanded, higher order H-transfers/cyclizations by positioning the interacting substituents on distanced rings. Cyclizations of appropriately functionalized biaryl and fused bicyclic systems led to 7-9 membered rings. In the frame of this research, we set out to study the feasibility of the cyclization and the factors affecting it by in silico methods. The conclusions drawn from computational studies were complemented by cyclization screens on 2-(2-vinyl)phenoxy-tert-anilines and their CH2-expanded analogues, the results of which are presented here. Besides isolating the expected oxazonine products in several cases, we also observed a unique dimer formation, leading to an interesting 5-6-5 ring system.

Discovery of N-X anomeric amides as electrophilic halogenation reagents

Electrophilic halogenation is a widely used tool employed by medicinal chemists to either pre-functionalize molecules for further diversity or incorporate a halogen atom into drugs or drug-like compounds to solve metabolic problems or modulate off-target effects. Current methods to increase the power of halogenation rely on either the invention of new reagents or activating commercially available reagents with various additives such as Lewis or Brønsted acids, Lewis bases and hydrogen-bonding activators. There is a high demand for new reagents that can halogenate otherwise unreactive compounds under mild conditions. Here we report the invention of a class of halogenating reagents based on anomeric amides, taking advantage of the energy stored in the pyramidalized nitrogen of N-X anomeric amides as a driving force. These robust halogenating methods are compatible with a variety of functional groups and heterocycles, as exemplified on over 50 compounds (including 13 gram-scale examples and 1 flow chemistry scale-up).

Remote proton elimination: C-H activation enabled by distal acidification

Generally, the acidity of carbon-hydrogen bonds is most sensitive to functionality just one or two bonds away. Here, we present an approach to the formation of carbon-carbon σ bonds by remote proton elimination, a distinct mode of carbon-hydrogen activation enabled by distal acidification through five carbon-carbon bonds. Application of remote proton elimination to cyclodecyl cations unveiled an appealing method for the synthesis of decalins. The transformation is regioconvergent, proceeds without the need for a directing group or precious metal, and demonstrates exquisite site selectivity. An in-depth computational study illuminated the reaction mechanism. Additionally, we describe the complete stereoisomeric enrichment of the decalin products through epimerization mediated by hydrogen atom transfer.

Asymmetric C-H Dehydrogenative Alkenylation via a Photo-induced Chiral α‑Imino Radical Intermediate

The direct alkenylation with simple alkenes stands out as the most ideal yet challenging strategy for obtaining high-valued desaturated alkanes. Here we present a direct asymmetric dehydrogenative α-C(sp3)-H alkenylation of carbonyls based on synergistic photoredox-cobalt-chiral primary amine catalysis under visible light. The ternary catalytic system enables the direct coupling of β-keto-carbonyls and alkenes through a cooperative radical addition-dehydrogenation process involving a chiral α-imino radical and Co(II)-metalloradical intermediate. A catalytic H-transfer process involving nitrobenzene is engaged to quench in situ generated cobalt hydride species, ensuring a chemoselective alkenylation in good yields and high enantioselectivities.

Mechanochemical C-H Arylation and Alkylation of Indoles Using 3 d Transition Metal and Zero-Valent Magnesium

Although the 3 d transition-metal catalyzed C-H functionalization have been extensively employed to promote the formation of valuable carbon-carbon bonds, the persistent problems, including the use of sensitive Grignard reagents and the rigorous operations (solvent-drying, inert gas protection, metal pre-activation and RMgX addition rate control), still leave great room for further development of sustainable methodologies. Herein, we report a mechanochemical technology toward in-situ preparation of highly sensitive organomagnesium reagents, and thus building two general 3 d transition-metal catalytic platforms that enables regioselective arylation and alkylation of indoles with a wide variety of halides (including those containing post transformable functionalities and heteroaromatic rings). This mechanochemical strategy also brings unique reactivity and high step-economy in producing functionalized N-free indole products.

Recent advances in total synthesis of protoberberine and chiral tetrahydroberberine alkaloids

Covering: Up to 2024Due to the widespread distribution of protoberberine alkaloids (PBs) and tetrahydroberberine alkaloids (THPBs) in nature, coupled with their myriad unique physiological activities, they have garnered considerable attention from medical practitioners. Over the past few decades, synthetic chemists have devised various total synthesis methods to attain these structures, continually expanding reaction pathways to achieve more efficient synthetic strategies. Simultaneously, the chiral construction of THPBs has become a focal point. In this comprehensive review, we categorically summarized the developmental trajectory of the total synthesis of these alkaloids based on the core closure strategies of protoberberine and tetrahydroberberine.

When is an Imine Directing Group a Transient Imine Directing Group in C-H Functionalization?

'Transient' C-H functionalization has emerged in recent years to describe the use of a dynamic linkage, often an imine, to direct cyclometallation and subsequent functionalization. As the field continues to grow in popularity, we consider the features that make an imine directing group transient. A transient imine should be i) formed dynamically in situ, ii) avoid discrete introduction or cleavage steps, and iii) offer the potential for catalysis in both the directing group and metal. This concept article contrasts transient imines with pioneering early studies of imines as directing groups for the formation of metallacycles and the use of preformed imines in C-H functionalization. Leading developments in the use of catalytic additives to form transient directing groups (as aldehyde or amine) are covered including selected highlights of the most recent examples of catalytic imine directed C-H functionalization with transition metals.

Regioselective synthesis of isoquinolinonediones through remote unactivated C(sp3)-H bonds

Herein, a general strategy for the remote-site-selective cascade addition/cyclization of unactivated C(sp3)-H bonds in free alcohols and sulfonamides to build isoquinolinonedione skeletons is developed. The site selectivity occurs predominantly via a 1,5-hydrogen atom transfer (HAT) process, triggered by heteroatom-centred radicals generated directly under silver catalysis. A broad substrate scope and excellent regio-/chemo-selective control are demonstrated in this method.

Extended Quinolizinium-Fused Corannulene Derivatives: Synthesis and Properties

Reported here is the design and synthesis of a novel class of extended quinolizinium-fused corannulene derivatives with curved geometry. These intriguing molecules were synthesized through a rationally designed synthetic strategy, utilizing double Skraup-Doebner-Von Miller quinoline synthesis and a rhodium-catalyzed C-H activation/annulation (CHAA) as the key steps. Single-crystal X-ray analysis revealed a bowl depth of 1.28-1.50 Å and a unique "windmill-like" shape packing of 12a(2PF6-) due to the curvature and incorporation of two aminium ions. All of the newly reported curved salts exhibit green to orange fluorescence with enhanced quantum yields (Φf = 9-13%) and improved dispersibility compared to the pristine corannulene (Φf = 1%). The reduced optical energy gap and lower energy frontier orbital found by doping extended corannulene systems with nitrogen cations was investigated by UV-vis, fluorescence, and theoretical calculations. Electrochemical measurements reveal a greater electron-accepting behavior compared with that of their pyridine analogues. The successful synthesis, isolation, and evaluation of these curved salts provide a fresh perspective and opportunity for the design of cationic nitrogen-doped curved aromatic hydrocarbon-based materials.

Molecular Design of Naphthalene- and Carbazole-Based Monomers for Regiospecific Synthesis of Poly(arylenevinylene)s via Co-Catalyzed Hydroarylation Polyaddition

This study focuses on the development of regiospecific hydroarylation polyaddition of naphthalene- and carbazole-based monomers with diynes under mild reaction conditions at room temperature. A 1-pyrazole substituent serves as an appropriate directing group for a Co-catalyst to efficiently activate the C-H bonds of generally inactive six-membered aromatic hydrocarbons. The 1-pyrazole groups in 2,6-di(1-pyrazolyl)naphthalene adopt planar conformations and act as directing groups, resulting in a smooth hydroarylation reaction. In contrast, the reaction with 1,5-di(1-pyrazolyl)naphthalene do not proceed. The polyaddition reaction of 2,6-di(1-pyrazolyl)naphthalene selectively proceeds at 3,7-positions under mild reaction conditions at 30 °C, and yields corresponding poly(arylenevinylene) (PAV) with high molecular weight. This molecular design is also applicable to the hydroarylation polyaddition of carbazole; the polyaddition reaction of 9-(2-ethylhexyl)-3,6-di(1-pyrazolyl)carbazole selectively occurred at 2,7-positions. The optical and electronic properties of the synthesized compounds are evaluated. The obtained PAVs serve as an emitting material in organic light-emitting diode (OLED). This study aims to develop a Co-catalyzed hydroarylation polyaddition via C-H activation of generally inactive polyaromatic hydrocarbons (PAHs) under mild conditions.

C(sp3)-C(sp3) Coupling of Cycloalkanes and Alkyl Halides via Dual Photocatalytic Hydrogen Atom Transfer and Nickel Catalysis

Functionalization of C(sp3)-H bonds represents the most straightforward and atom-economical transformation in organic synthesis. An innovative approach integrating photocatalytic hydrogen atom transfer (HAT) and transition metal catalysis has made significant progress in the coupling of α-heterosubstituted C-H bonds with alkyl halides. However, unactivated alkanes were ineffective as a result of the preponderance of byproduct formation. Herein, we demonstrate direct HAT and nickel catalysis in the coupling of cycloalkanes and benzyl bromides/primary alkyl iodides. Additionally, tetrabutylammonium decatungstate (TBADT) was recovered and recycled.

Studies towards the Enantioselective Synthesis of Cryptowolinol via Pd0-Catalyzed C(sp3)-H Arylation/Parallel Kinetic Resolution

We report a model study towards the enantioselective synthesis of the dibenzopyrrocoline alkaloid (-)-cryptowolinol. The key step involves a challenging enantioselective Pd0-catalyzed C(sp3)-H arylation performed with a chiral NHC ligand, which proceeds via parallel kinetic resolution (PKR). A very efficient PKR process was achieved on a deoxygenated model substrate and was successfully transposed to a potential intermediate en route to (-)-cryptowolinol.

Synthesis of Highly Substituted Aminotetrahydropyrans Enabled by Stereospecific Multivector C-H Functionalization

Highly substituted aminotetrahydropyrans were synthesized via sequential C-H functionalizations. The process was initiated with a Pd(II)-catalyzed stereoselective γ-methylene C-H arylation of aminotetrahydropyran, followed by α-alkylation or arylation of the corresponding primary amine. The initial γ-C-H (hetero)arylation was compatible with a range of aryl iodides containing various substituents and provided the corresponding products in moderate to good yields. The subsequent α-alkylation or arylation of the isolated arylated products proceeded with high diastereoselectivity to afford value-added disubstituted aminotetrahydropyrans.

Tandem Reactions of Electrophilic Indoles toward Indolizines and Their Subsequent Transformations through Pd(II)-Mediated C-H Functionalization to Access Polyring-Fused N-Heterocycles

A simple and efficient synthetic approach for generating a library of structurally novel indolizines has been developed via sequential 1,3-dipolar cycloaddition-ring opening processes. Using this methodology, a series of indolizines bearing different substituents were made in moderate to good yields. The presence of two functionalizable C-H bonds in these indolizine motifs makes them attractive for accessing fused indolizine scaffolds. In this line, we have introduced palladium-mediated site-selective C-H functionalizations, where the N-center and the two C-H centers of the indolizine moiety can be readily functionalized to generate fused N-heterocycles. Utilizing a Pd-mediated dual C-H activation of 5-benzoyl-substituted indolizine afforded 6H-indeno-indolizine, and a tetracene, viz., indolizino[2,1-b]indoles, was produced in the same substrate by the Pd-catalyzed selective C-H amination in the presence of oxygen.

Explainable Graph Neural Networks with Data Augmentation for Predicting pKa of C-H Acids

The pKa of C-H acids is an important parameter in the fields of organic synthesis, drug discovery, and materials science. However, the prediction of pKa is still a great challenge due to the limit of experimental data and the lack of chemical insight. Here, a new model for predicting the pKa values of C-H acids is proposed on the basis of graph neural networks (GNNs) and data augmentation. A message passing unit (MPU) was used to extract the topological and target-related information from the molecular graph data, and a readout layer was utilized to retrieve the information on the ionization site C atom. The retrieved information then was adopted to predict pKa by a fully connected network. Furthermore, to increase the diversity of the training data, a knowledge-infused data augmentation technique was established by replacing the H atoms in a molecule with substituents exhibiting different electronic effects. The MPU was pretrained with the augmented data. The efficacy of data augmentation was confirmed by visualizing the distribution of compounds with different substituents and by classifying compounds. The explainability of the model was studied by examining the change of pKa values when a specific atom was masked. This explainability was used to identify the key substituents for pKa. The model was evaluated on two data sets from the iBonD database. Dataset1 includes the experimental pKa values of C-H acids measured in DMSO, while dataset2 comprises the pKa values measured in water. The results show that the knowledge-infused data augmentation technique greatly improves the predictive accuracy of the model, especially when the number of samples is small.

Enantioselective Divergent Syntheses of Diterpenoid Pyrones

Capitalizing a synergy between late-stage C(sp3)-H alkynylation and a series of transition metal-catalyzed alkyne functionalization reactions, we reported herein enantioselective divergent synthesis of 10 diterpenoid pyrones within 14-16 steps starting from chiral pool enoxolone, including the first enantioselective synthesis of higginsianins A, B, D, E, and metarhizin C. Our synthesis also highlights an unprecedented biomimetic oxidative rearrangement of α-pyrone into 3(2H)-furanone, as well as applications of Echavarren C(sp3)-H alkynylation reaction and Toste chiral counterion-mediated Au-catalyzed intramolecular allene hydroalkoxylation in natural product synthesis.

Iodide-umpolung catalytic system for non-traditional amide coupling from nitroalkanes and amines

An N-iodosuccinimide (NIS) catalyst was developed for use in the non-traditional synthesis of amide derivatives from nitroalkanes and amines. In contrast to traditional oxidative catalysis, this catalytic system involves reversing the polarities of two catalytic components (umpolung) by means of a hypervalent iodine reagent. A variety of functional groups were tolerated in the reaction, suggesting that they have the potential for use in other types of oxidative catalytic reactions.

Trialkoxysilane-Induced Iridium-Catalyzed para-Selective C-H Bond Borylation of Arenes

An ideal approach for the construction of aryl boron compounds is to selectively replace a C-H bond in arenes with a C-B bond, and controlling regioselectivity is one of the most challenging aspects of these transformations. Herein, we report an iridium-catalyzed trialkoxysilane protecting group-assisted regioselective C-H borylation of arenes, including derivatives of benzaldehydes, acetophenones, benzoic acids, benzyl alcohols, phenols, aryl silanes, benzyl silanes, and multi-functionalized aromatic rings are all well tolerated and gave the para -selective C-H borylation products in a short time without the requirement of inert gases atmosphere. The site-selective C-H borylation can be adjustable by installing the developed trialkoxysilane protecting group on different functional groups on one aromatic ring. Importantly, the preparation process of the trialkoxychlorosilane is efficient and scalable. Mechanistic and computational studies reveal that the steric hindrance of the trialkoxysilane protecting group plays a key role in dictating the para-selectivity.

Recent advances in Rh(I)-catalyzed enantioselective C-H functionalization

Chiral carbon-carbon (C-C) and carbon-heteroatom (C-X) bonds are pervasive and very essential in natural products, bioactive molecules, and functional materials, and their catalytic construction has emerged as one of the hottest research fields in synthetic organic chemistry. The last decade has witnessed vigorous progress in Rh(I)-catalyzed asymmetric C-H functionalization as a complement to Rh(II) and Rh(III) catalysis. This review aims to provide the most comprehensive and up-to-date summary covering the recent advances in Rh(I)-catalyzed C-H activation for asymmetric functionalization. In addition to the development of diverse reactions, chiral ligand design and mechanistic investigation (inner-sphere mechanism, outer-sphere mechanism, and 1,4-Rh migration) will also be highlighted.

Engineering Hydroxylase Activity, Selectivity, and Stability for a Scalable Concise Synthesis of a Key Intermediate to Belzutifan

Biocatalytic oxidations are an emerging technology for selective C-H bond activation. While promising for a range of selective oxidations, practical use of enzymes catalyzing aerobic hydroxylation is presently limited by their substrate scope and stability under industrially relevant conditions. Here, we report the engineering and practical application of a non-heme iron and α-ketoglutarate-dependent dioxygenase for the direct stereo- and regio-selective hydroxylation of a non-native fluoroindanone en route to the oncology treatment belzutifan, replacing a five-step chemical synthesis with a direct enantioselective hydroxylation. Mechanistic studies indicated that formation of the desired product was limited by enzyme stability and product overoxidation, with these properties subsequently improved by directed evolution, yielding a biocatalyst capable of >15,000 total turnovers. Highlighting the industrial utility of this biocatalyst, the high-yielding, green, and efficient oxidation was demonstrated at kilogram scale for the synthesis of belzutifan.

Csp2-H functionalization of phenols: an effective access route to valuable materials via Csp2-C bond formation

In the vast majority of top-selling pharmaceutical and industrial products, phenolic structural motifs are highly prevalent. Non-functionalized simple phenols serve as building blocks in the synthesis of value-added chemicals. It is worth mentioning that lignin, being the largest renewable biomass source of aromatic building blocks in nature, mainly consists of phenolic units, which enable the production of structurally diverse phenols. Given their remarkable applicability in the chemical value chain, many efforts have been devoted to increasing the molecular complexity of the phenolic scaffold. Among the key techniques, direct functionalization of Csp2-H is a powerful tool, enabling the construction of new Csp2-C bonds in an economical and atomic manner. Herein we present and summarize the large plethora of direct Csp2-H functionalization methods that enables scaffold diversification of simple, unprotected phenols, leading to the formation of new Csp2-C bonds. In this review article, we intend to summarize the contributions that appeared in the literature mainly in the last 5 years dealing with the functionalization of unprotected phenols, both catalytic and non-catalytic. Our goal is to highlight the key findings and the ongoing challenges in the stimulating and growing research dedicated to the development of new protocols for the valorization of phenols.

Enantioselective functionalization of unactivated C(sp3)-H bonds through copper-catalyzed diyne cyclization by kinetic resolution

Site- and stereoselective C-H functionalization is highly challenging in the synthetic chemistry community. Although the chemistry of vinyl cations has been vigorously studied in C(sp3)-H functionalization reactions, the catalytic enantioselective C(sp3)-H functionalization based on vinyl cations, especially for an unactivated C(sp3)-H bond, has scarcely explored. Here, we report an asymmetric copper-catalyzed tandem diyne cyclization/unactivated C(sp3)-H insertion reaction via a kinetic resolution, affording both chiral polycyclic pyrroles and diynes with generally excellent enantioselectivities and excellent selectivity factors (up to 750). Importantly, this reaction demonstrates a metal-catalyzed enantioselective unactivated C(sp3)-H functionalization via vinyl cation and constitutes a kinetic resolution reaction based on diyne cyclization. Theoretical calculations further support the mechanism of vinyl cation-involved C(sp3)-H insertion reaction and elucidate the origin of enantioselectivity.

Recent advancement in the synthesis of isothiocyanates

Isothiocyanates exhibit various biological characteristics, including antimicrobial, anti-inflammatory, and anticancer properties. Their significance extends to synthetic chemistry, where they serve as valuable platforms for versatile transformations. Consequently, they have attracted the attention of biologists and chemists. This review summarizes recent advancements in the synthesis of isothiocyanates. Access to a variety of starting materials is important to prepare isothiocyanates with diverse structures. This review categorizes synthetic methods into three types based on the starting materials and functional groups: (i) type A, derived from primary amines; (ii) type B, derived from other nitrogen functional groups; and (iii) type C, derived from non-nitrogen groups. Recent trends in synthetic methods have revealed the prevalence of type-A reactions derived from primary amines. However, type B reactions have rarely been reported. Notably, over the past four years, there has been a notable increase in type C reactions, indicating a growing interest in non-nitrogen-derived isothiocyanates. Overall, this review not only outlines the advancements in the synthesis of isothiocyanates but also highlights trends in the methodology.

Unusual catalytic strategy by non-heme Fe(ii)/2-oxoglutarate-dependent aspartyl hydroxylase AspH

Biocatalytic C-H oxidation reactions are of important synthetic utility, provide a sustainable route for selective synthesis of important organic molecules, and are an integral part of fundamental cell processes. The multidomain non-heme Fe(ii)/2-oxoglutarate (2OG) dependent oxygenase AspH catalyzes stereoselective (3R)-hydroxylation of aspartyl- and asparaginyl-residues. Unusually, compared to other 2OG hydroxylases, crystallography has shown that AspH lacks the carboxylate residue of the characteristic two-His-one-Asp/Glu Fe-binding triad. Instead, AspH has a water molecule that coordinates Fe(ii) in the coordination position usually occupied by the Asp/Glu carboxylate. Molecular dynamics (MD) and quantum mechanics/molecular mechanics (QM/MM) studies reveal that the iron coordinating water is stabilized by hydrogen bonding with a second coordination sphere (SCS) carboxylate residue Asp721, an arrangement that helps maintain the six coordinated Fe(ii) distorted octahedral coordination geometry and enable catalysis. AspH catalysis follows a dioxygen activation-hydrogen atom transfer (HAT)-rebound hydroxylation mechanism, unusually exhibiting higher activation energy for rebound hydroxylation than for HAT, indicating that the rebound step may be rate-limiting. The HAT step, along with substrate positioning modulated by the non-covalent interactions with SCS residues (Arg688, Arg686, Lys666, Asp721, and Gln664), are essential in determining stereoselectivity, which likely proceeds with retention of configuration. The tetratricopeptide repeat (TPR) domain of AspH influences substrate binding and manifests dynamic motions during catalysis, an observation of interest with respect to other 2OG oxygenases with TPR domains. The results provide unique insights into how non-heme Fe(ii) oxygenases can effectively catalyze stereoselective hydroxylation using only two enzyme-derived Fe-ligating residues, potentially guiding enzyme engineering for stereoselective biocatalysis, thus advancing the development of non-heme Fe(ii) based biomimetic C-H oxidation catalysts, and supporting the proposal that the 2OG oxygenase superfamily may be larger than once perceived.

Mechanistic Insights into the Origins of Selectivity in a Cu-Catalyzed C-H Amidation Reaction

The catalytic transformation of C-H to C-N bonds offers rapid access to fine chemicals and high-performance materials, but achieving high selectivity from undirected aminations of unactivated C(sp3)-H bonds remains an outstanding challenge. We report the origins of the reactivity and selectivity of a Cu-catalyzed C-H amidation of simple alkanes. Using a combination of experimental and computational mechanistic studies and energy decomposition techniques, we uncover a switch in mechanism from inner-sphere to outer-sphere coupling between alkyl radicals and the active Cu(II) catalyst with increasing substitution of the alkyl radical. The combination of computational predictions and detailed experimental validation shows that simultaneous minimization of both Cu-C covalency and alkyl radical size increases the rate of reductive elimination and that both strongly electron-donating and electron-withdrawing substituents on the catalyst accelerate the selectivity-determining C-N bond formation process as a result of a change in mechanism. These findings offer design principles for the development of improved catalyst scaffolds for radical C-H functionalization reactions.

Cobalt-Catalyzed Enantioselective C-H Carbonylation towards Chiral Isoindolinones

Transition metal-catalyzed enantioselective C-H carbonylation with carbon monoxide, an essential and easily available C1 feedstock, remains challenging. Here, we disclosed an unprecedented enantioselective C-H carbonylation catalyzed by inexpensive and readily available cobalt(II) salt. The reactions proceed efficiently through desymmetrization, kinetic resolution, and parallel kinetic resolution, affording a broad range of chiral isoindolinones in good yields with excellent enantioselectivities (up to 92 % yield and 99 % ee). The synthetic potential of this method was demonstrated by asymmetric synthesis of biological active compounds, such as (S)-PD172938 and (S)-Pazinaclone. The resulting chiral isoindolinones also serve as chiral ligands in cobalt-catalyzed enantioselective C-H annulation with alkynes to construct phosphorus stereocenter.

Ligand-free Pd-catalyzed highly selective arylation of activated and unactivated alkenes via oxidative and reductive heck coupling

In this work, an eco-friendly, green, efficient approach for oxidative and reductive Heck-Mizoroki (HM) reactions was developed, which offered acceptable yields from first-pass experiments. Mono-arylation was achieved without the use of ligands, directing groups, or prefunctionalized alkenes. Considering mild reaction conditions, good functional group compatibility, and great regioselectivity, the method can find broad applications in novel medicine and material development and discovery processes.

Hole-Transporting Materials based on Oligo(hetero)aryls with a Naphthodithiophene Core - Succinct Synthesis by Twofold Direct C-H Olefination

This work demonstrated the first synthetic application of direct C-H olefinations in the step-saving preparation of various hole-transporting materials (HTM) for efficient perovskite solar cells (PSC). Cross-dehydrogenative couplings of naphthodithiophene (NDT) with vinyl arenes under palladium-catalysis facilely generated various new oligo(hetero)aryls with internal alkenes. Reaction conditions were optimized, which gave the product isolated yields of up to 71 % with high (E)-stereoselectivity. These readily accessible NDT core-based small molecules involving olefin as π-spacers displayed immediate power conversion efficiencies of up to 17.2 % without a device oxidation process that is required for the commercially available spiro-OMeTAD and most other existing HTMs while fabricated in corresponding PSC devices.

Cu(II) Promoted C(sp3 )-H Activation in Unactivated Cycloalkanes: Oxo-Alkylation of Styrenes to Synthesize β-Disubstituted Ketones

We report the Cu(II) catalyzed synthesis of β-disubstituted ketones from styrene via oxo-alkylation with unactivated cycloalkanes as the alkylating agent in presence of tert-butylhydroperoxide (TBHP) and 1-methylimidazole as oxidant and base respectively. β-disubstituted ketones are known to be synthesized by using either expensive Ru/Ir complexes, or low-cost metal complexes (e. g., Fe, Mn) with activated species like aldehyde, acid, alcohol, or phthalimide derivatives as the alkylating agent, however, use of unactivated cycloalkanes directly as the alkylating agent remains challenging. A wide range of aliphatic C-H substrates as well as various olefinic arenes and heteroarene (35 substrates including 14 new substrates) are well-tolerated in this method. Hammett analysis shed more light on the substitution effect in the olefinic part on the overall mechanism. Furthermore, the controlled experiments, kinetic isotope effect study, and theoretical calculations (DFT) enable us to gain deeper insight of mechanistic intricacies of this new simple and atom-economic methodology.

Asymmetric α-C(sp3)-H allylic alkylation of primary alkylamines by synergistic Ir/ketone catalysis

Primary alkyl amines are highly reactive in N-nucleophilic reactions with electrophiles. However, their α-C-H bonds are unreactive towards electrophiles due to their extremely low acidity (pKa ~57). Nonetheless, 1,8-diazafluoren-9-one (DFO) can activate primary alkyl amines by increasing the acidity of the α-amino C-H bonds by up to 1044 times. This makes the α-amino C-H bonds acidic enough to be deprotonated under mild conditions. By combining DFO with an iridium catalyst, direct asymmetric α-C-H alkylation of NH2-unprotected primary alkyl amines with allylic carbonates has been achieved. This reaction produces a wide range of chiral homoallylic amines with high enantiopurities. The approach has successfully switched the reactivity between primary alkyl amines and allylic carbonates from intrinsic allylic amination to the α-C-H alkylation, enabling the construction of pharmaceutically significant chiral homoallylic amines from readily available primary alkyl amines in a single step.

Convergent and Efficient Total Synthesis of (+)-Heilonine Enabled by C-H Functionalizations

We report a convergent and efficient total synthesis of the C-nor D-homo steroidal alkaloid (+)-heilonine with a hexacyclic ring system, nine stereocenters, and a trans-hydrindane moiety. Our synthesis features four selective C-H functionalizations to form key C-C bonds and stereocenters, a Stille carbonylative cross-coupling to connect the AB ring system with the DEF ring system, and a Nazarov cyclization to construct the five-membered C ring. These enabling transformations significantly reduced functional group manipulations and delivered (+)-heilonine in 11 or 13 longest linear sequence (LLS) steps.

Discovery of Organic Optoelectronic Materials Powered by Oxidative Ar-H/Ar-H Coupling

Efficient and streamlined synthetic methods that facilitate the rapid build-up of structurally diverse π-conjugated systems are of paramount importance in the quest for organic optoelectronic materials. Among these methods, transition-metal-catalyzed oxidative Ar-H/Ar-H coupling reactions between two (hetero)arenes have emerged as a concise and effective approach for generating a wide array of bi(hetero)aryl and fused heteroaryl structures. This innovative approach bypasses challenges associated with substrate pre-activation processes, thereby allowing for the creation of frameworks that were previously beyond reach using conventional Ar-X/Ar-M coupling reactions. These inherent advantages have ushered in new design patterns for organic optoelectronic molecules that deviate from traditional methods. This ground-breaking approach enables the transcendence of the limitations of repetitive material structures, ultimately leading to the discovery of novel high-performance materials. In this Perspective, we provide an overview of recent advances in the development of organic optoelectronic materials through the utilization of transition-metal-catalyzed oxidative Ar-H/Ar-H coupling reactions. We introduce several notable synthetic strategies in this domain, covering both directed and non-directed oxidative Ar-H/Ar-H coupling strategies, dual chelation-assisted strategy and directed ortho-C-H arylation/cyclization strategy. Additionally, we shed light on the role of oxidative Ar-H/Ar-H coupling reactions in the advancement of high-performance organic optoelectronic materials. Finally, we discuss the current limitations of existing protocols and offer insights into the future prospects for this field.

Photocatalyzed Enantioselective Functionalization of C(sp3)-H Bonds

Owing to its diverse activation processes including single-electron transfer (SET) and hydrogen-atom transfer (HAT), visible-light photocatalysis has emerged as a sustainable and efficient platform for organic synthesis. These processes provide a powerful avenue for the direct functionalization of C(sp3)-H bonds under mild conditions. Over the past decade, there have been remarkable advances in the enantioselective functionalization of the C(sp3)-H bond via photocatalysis combined with conventional asymmetric catalysis. Herein, we summarize the advances in asymmetric C(sp3)-H functionalization involving visible-light photocatalysis and discuss two main pathways in this emerging field: (a) SET-driven carbocation intermediates are followed by stereospecific nucleophile attacks; and (b) photodriven alkyl radical intermediates are further enantioselectively captured by (i) chiral π-SOMOphile reagents, (ii) stereoselective transition-metal complexes, and (iii) another distinct stereoscopic radical species. We aim to summarize key advances in reaction design, catalyst development, and mechanistic understanding, to provide new insights into this rapidly evolving area of research.

Direct Heterocycle C-H Alkenylation via Dual Catalysis Using a Palladacycle Precatalyst: Multifactor Optimization and Scope Exploration Enabled by High-Throughput Experimentation

One of the major challenges in developing catalytic methods for C-C bond formation is the identification of generally applicable reaction conditions, particularly if multiple substrate structural classes are involved. Pd-catalyzed direct arylation reactions are powerful transformations that enable direct functionalization of C-H bonds; however, the corresponding direct alkenylation reactions, using vinyl (pseudo) halide electrophiles, are less well developed. Inspired by process development efforts toward GSK3368715, an investigational active pharmaceutical ingredient, we report that a Pd(II) palladacycle derived from tri-tert-butylphosphine and Pd(OAc)2 is an effective single-component precatalyst for a variety of direct alkenylation reactions. High-throughput experimentation identified optimal solvent/base combinations for a variety of HetAr-H substrate classes undergoing C-H activation without the need for cocatalysts or stoichiometric silver bases (e.g., Ag2CO3). We propose this reaction proceeds via a dual cooperative catalytic mechanism, where in situ-generated Pd(0) supports a canonical Pd(0)/(II) cross-coupling cycle and the palladacycle effects C-H activation via CMD in a redox-neutral cycle. In all, 192 substrate combinations were tested with a hit rate of approximately 40% and 24 isolated examples. Importantly, this method was applied to prepare a key intermediate in the synthesis of GSK3368715 on multigram scale.

Eight-Membered Palladacycle Intermediate Enabled Synthesis of Cyclic Biarylphosphonates

Transition-metal-catalyzed coupling reactions that involve the direct functionalization of insert C-H bond represent one of the most efficient strategies for forming carbon-carbon bonds. Herein, a palladium-catalyzed intramolecular C-H bond arylation of triaryl phosphates is reported to access seven-membered cyclic biarylphosphonate targets. The reaction is achieved via a unique eight-membered palladacyclic intermediate and shows good functional group compatibility. Meanwhile, the product can be readily converted into other valuable phosphate compounds.

Ring Walking Mediated by Ni-Ni Species as a Vehicle for Enabling Distal C(sp2)-H Functionalization of Aryl Pivalates

Herein, we report the utilization of Ni-Ni species as a manifold for enabling a "ring-walking" event by dynamic translocation of the metal center over the arene backbone. Experimental and computational studies support a translocation occurring via a 1,2-hydride shift. The synthetic applicability of the method is illustrated in a series of C-C bond formations that occur at distal C(sp2)-H sites of simple aryl pivalates.

Combinatorial Ligand Assisted Simultaneous Control of Axial and Central Chirality in Highly Stereoselective C-H Allylation

The significance of stereoselective C-H bond functionalization thrives on its direct application potential to pharmaceuticals or complex chiral molecule synthesis. Complication arises when there are multiple stereogenic elements such as a center and an axis of chirality to control. Over the years cooperative assistance of multiple chiral ligands has been applied to control only chiral centers. In this work, we harness the essence of cooperative ligand approach to control two different stereogenic elements in the same molecule by atroposelective allylation to synthesize axially chiral biaryls from its racemic precursor. The crucial roles played by chiral phosphoric acid and chiral amino acid ligand in concert helped us to obtain one major stereoisomer out of four distinct possibilities.

Rh(III)-catalyzed selective mono- and dual-functionalization/cyclization of 1-aryl-5-aminopyrazoles with iodonium ylides

An efficient Rh(III)-catalyzed selective mono- and dual-C-H bond functionalization/cyclization with iodonium ylide as a single coupling partner was demonstrated, in which fused benzodiazepine skeletons were obtained in excellent yields. This method greatly improved an effective approach to dual C-H unsymmetrical functionalization.

Unlocking regioselective meta-alkylation with epoxides and oxetanes via dynamic kinetic catalyst control

Regioselective arene C-H bond alkylation is a powerful tool in synthetic chemistry, yet subject to many challenges. Herein, we report the meta-C-H bond alkylation of aromatics bearing N-directing groups using (hetero)aromatic epoxides as alkylating agents. This method results in complete regioselectivity on both the arene as well as the epoxide coupling partners, cleaving exclusively the benzylic C-O bond. Oxetanes, which are normally unreactive, also participate as alkylating reagents under the reaction conditions. Our mechanistic studies reveal an unexpected reversible epoxide ring opening process undergoing catalyst-controlled regioselection, as key for the observed high regioselectivities.

Continuous-Flow Enantioselective Hydroacylations under Heterogeneous Chiral Rhodium Catalysts

Transition metal-catalyzed enantioselective C-H bond functionalizations have become efficient methods for the synthesis of complex optically active molecules. Heterogeneous catalysts for this chemistry remain largely unexplored despite the advantages they offer in terms of ease of separation and reuse of catalysts. Herein, we report the development of heterogeneous chiral Rh catalysts for continuous-flow enantioselective hydroacylations. Heterogeneous catalysts could be prepared simply by mixing supports and Rh complexes. The prepared catalysts exhibited excellent activity and enantioselectivity affording optically active ketones in quantitative yields with 99 % ee's. Under the optimized reaction conditions, a turnover number >300 was achieved without the leaching of Rh species. The catalysts exhibited a wide substrate scope and in sequential-flow reactions with other heterogeneous catalysts, the syntheses of biologically active molecules and functional materials were demonstrated.

Methylene C(sp3 )-H Arylation Enables the Stereoselective Synthesis and Structure Revision of Indidene Natural Products

The divergent synthesis of two indane polyketides of the indidene family, namely (±)-indidene A (11 steps, 1.7 %) and (+)-indidene C (13 steps, 1.3 %), is reported. The synthesis of the trans-configured common indane intermediate was enabled by palladium(0)-catalyzed methylene C(sp3 )-H arylation, which was performed in both racemic and enantioselective (e.r. 99 : 1) modes. Further elaboration of this common intermediate by nickel-catalyzed dehydrogenative coupling allowed the rapid installation of the aroyl moiety of (±)-indidene A. In parallel, the biphenyl system of (±)- and (+)-indidene C was constructed by Suzuki-Miyaura coupling. These investigations led us to revise the structures of indidenes B and C.

The Recent Advances in Iron-Catalyzed C(sp3 )-H Functionalization

The use of iron as a core metal in catalysis has become a research topic of interest over the last few decades. The reasons are clear. Iron is the most abundant transition metal on Earth's crust and it is widely distributed across the world. It has been extracted and processed since the dawn of civilization. All these features render iron a noncontaminant, biocompatible, nontoxic, and inexpensive metal and therefore it constitutes the perfect candidate to replace noble metals (rhodium, palladium, platinum, iridium, etc.). Moreover, direct C-H functionalization is one of the most efficient strategies by which to introduce new functional groups into small organic molecules. The majority of organic compounds contain C(sp3 )-H bonds. Given the enormous importance of organic molecules in so many aspects of existence, the utilization and bioactivity of C(sp3 )-H bonds are of the utmost importance. This review sheds light on the substrate scope, selectivity, benefits, and limitations of iron catalysts for direct C(sp3 )-H bond activations. An overview of the use of iron catalysis in C(sp3 )-H activation protocols is summarized herein up to 2022.