Naturally Rolled-Up C/Si/C Trilayer Nanomembranes as Stable Anodes for Lithium-Ion Batteries with Remarkable Cycling Performance

Multilevel design and construction in nanomembrane rolling for three-dimensional angle-sensitive photodetection

Releasing pre-strained two-dimensional nanomembranes to assemble on-chip three-dimensional devices is crucial for upcoming advanced electronic and optoelectronic applications. However, the release process is affected by many unclear factors, hindering the transition from laboratory to industrial applications. Here, we propose a quasistatic multilevel finite element modeling to assemble three-dimensional structures from two-dimensional nanomembranes and offer verification results by various bilayer nanomembranes. Take Si/Cr nanomembrane as an example, we confirm that the three-dimensional structural formation is governed by both the minimum energy state and the geometric constraints imposed by the edges of the sacrificial layer. Large-scale, high-yield fabrication of three-dimensional structures is achieved, and two distinct three-dimensional structures are assembled from the same precursor. Six types of three-dimensional Si/Cr photodetectors are then prepared to resolve the incident angle of light with a deep neural network model, opening up possibilities for the design and manufacturing methods of More-than-Moore-era devices.

Mechanically-Guided 3D Assembly for Architected Flexible Electronics

Architected flexible electronic devices with rationally designed 3D geometries have found essential applications in biology, medicine, therapeutics, sensing/imaging, energy, robotics, and daily healthcare. Mechanically-guided 3D assembly methods, exploiting mechanics principles of materials and structures to transform planar electronic devices fabricated using mature semiconductor techniques into 3D architected ones, are promising routes to such architected flexible electronic devices. Here, we comprehensively review mechanically-guided 3D assembly methods for architected flexible electronics. Mainstream methods of mechanically-guided 3D assembly are classified and discussed on the basis of their fundamental deformation modes (i.e., rolling, folding, curving, and buckling). Diverse 3D interconnects and device forms are then summarized, which correspond to the two key components of an architected flexible electronic device. Afterward, structure-induced functionalities are highlighted to provide guidelines for function-driven structural designs of flexible electronics, followed by a collective summary of their resulting applications. Finally, conclusions and outlooks are given, covering routes to achieve extreme deformations and dimensions, inverse design methods, and encapsulation strategies of architected 3D flexible electronics, as well as perspectives on future applications.

Molecular Electronics: Creating and Bridging Molecular Junctions and Promoting Its Commercialization

Molecular electronics is driven by the dream of expanding Moore's law to the molecular level for next-generation electronics through incorporating individual or ensemble molecules into electronic circuits. For nearly 50 years, numerous efforts have been made to explore the intrinsic properties of molecules and develop diverse fascinating molecular electronic devices with the desired functionalities. The flourishing of molecular electronics is inseparable from the development of various elegant methodologies for creating nanogap electrodes and bridging the nanogap with molecules. This review first focuses on the techniques for making lateral and vertical nanogap electrodes by breaking, narrowing, and fixed modes, and highlights their capabilities, applications, merits, and shortcomings. After summarizing the approaches of growing single molecules or molecular layers on the electrodes, the methods of constructing a complete molecular circuit are comprehensively grouped into three categories: 1) directly bridging one-molecule-electrode component with another electrode, 2) physically bridging two-molecule-electrode components, and 3) chemically bridging two-molecule-electrode components. Finally, the current state of molecular circuit integration and commercialization is discussed and perspectives are provided, hoping to encourage the community to accelerate the realization of fully scalable molecular electronics for a new era of integrated microsystems and applications.

A Review on Mechanochemistry: Approaching Advanced Energy Materials with Greener Force

Mechanochemistry with solvent-free and environmentally friendly characteristics is one of the most promising alternatives to traditional liquid-phase-based reactions, demonstrating epoch-making significance in the realization of different types of chemistry. Mechanochemistry utilizes mechanical energy to promote physical and chemical transformations to design complex molecules and nanostructured materials, encourage dispersion and recombination of multiphase components, and accelerate reaction rates and efficiencies via highly reactive surfaces. In particular, mechanochemistry deserves special attention because it is capable of endowing energy materials with unique characteristics and properties. Herein, the latest advances and progress in mechanochemistry for the preparation and modification of energy materials are reviewed. An outline of the basic knowledge, methods, and characteristics of different mechanochemical strategies is presented, distinguishing this review from most mechanochemistry reviews that only focus on ball-milling. Next, this outline is followed by a detailed and insightful discussion of mechanochemistry-involved energy conversion and storage applications. The discussion comprehensively covers aspects of energy transformations from mechanical/optical/chemical energy to electrical energy. Finally, next-generation advanced energy materials are proposed. This review is intended to bring mechanochemistry to the frontline and guide this burgeoning field of interdisciplinary research for developing advanced energy materials with greener mechanical force.

Porous Amorphous Silicon Hollow Nanoboxes Coated with Reduced Graphene Oxide as Stable Anodes for Sodium-Ion Batteries

Amorphous silicon (a-Si), due to its satisfactory theoretical capacity, moderate discharge potential, and abundant reserves, is treated as one of the most prospective materials for the anode of sodium-ion batteries (SIBs). However, the slow Na⁺ diffusion kinetics, poor electrical conductivity, and rupture-prone structures of a-Si restrict its further development. In this work, a composite (a-Si@rGO) consisting of porous amorphous silicon hollow nanoboxes (a-Si HNBs) and reduced graphene oxide (rGO) is prepared. The a-Si HNBs are synthesized through "sodiothermic reduction" of silica hollow nanoboxes at a relatively low temperature, and the rGO is covered on the surface of the a-Si HNBs by electrostatic interaction. The as-synthesized composite anode applying in SIBs exhibits a high initial discharge capacity of 681.6 mAh g^-1 at 100 mA g^-1, great stability over 2000 cycles at 800 mA g^-1, and superior rate performance (261.2, 176.8, 130.3, 98.4, and 73.3 mAh g^-1 at 100, 400, 800, 1500, and 3000 mA g^-1, respectively). The excellent electrochemical properties are ascribed to synergistic action of the porous hollow nanostructure of a-Si and the rGO coating. This research not only offers an innovative synthetic means for the development of a-Si in various fields but also provides a practicable idea for the design of other alloy-type anodes.

Dual structure engineering of SiOx-acrylic yarn derived carbon nanofiber based foldable Si anodes for low-cost lithium-ion batteries

Silicon (Si) is attracted much attention due to its outstanding theoretical capacity (4200 mAh/g) as the anode of lithium-ion batteries (LIBs). However, the large volume change and low electron/ion conductivity during the charge and discharge process limit the electrochemical performance of Si-based anodes. Here we demonstrate a foldable acrylic yarn-based composite carbon nanofiber embedded by Si@SiO_x particles (Si@SiO_x-CACNFs) as the anode material. Since the amorphous SiO_x and carbon (C) coating on the outside of the Si particles can provide a double buffer for volume expansion while reducing the contact between the Si core and the electrolyte to form a thin and stable solid electrolyte interface (SEI) film. Simultaneous in-situ electrochemical impedance spectroscopy (in-situ EIS) and galvanostatic intermittent titration technique (GITT) tests show that SiO_x and C have higher ion/electron transport rates, and in addition, using acrylic fiber yarn and Zn(Ac)₂ as raw materials reduces the manufacturing cost and enhanced mechanical properties. Therefore, the half-cell can achieve a high initial Coulombic efficiency (ICE) of 82.3% and a reversible capacity of 1358.2 mAh/g after 180 cycles. It can return to its original shape and remain intact after four consecutive folds, and the soft-pack full battery can also light up LED lights under different bending conditions.

Mg2SiO4/Si-Coated Disproportionated SiO Composite Anodes with High Initial Coulombic Efficiency for Lithium Ion Batteries

Silicon monoxide (SiO) is considered as one of the most promising anode material candidates for next-generation high-energy-density lithium ion batteries (LIBs) due to its high specific capacity and relatively lower volume expansion than that of Si. However, a large number of irreversible products are formed during the first charging and discharging process, resulting in a low initial Coulombic efficiency (ICE) of SiO. Herein, we report an economical and convenient method to increase the ICE of SiO without sacrificing its specific capacity by a solid reaction between magnesium silicide (Mg₂Si) and micron-sized SiO. The reaction product (named MSO) exhibits a unique core-shell structure with uniformly distributed Mg₂SiO₄ and Si as the shell and disproportionated SiO as the core. MSO exhibits a superior ICE and a high reversible capacity of 81.7% and 1306.1 mAh g^-1, respectively, which can be further increased to 88.7% and 1446.4 mAh g^-1 after carbon coating, and improved cyclic stability compared to bare SiO. This work provides a simple yet effective strategy to address the low ICE issue of SiO anode materials to promote the practical application of SiO.

Electromechanically reconfigurable optical nano-kirigami

Kirigami, with facile and automated fashion of three-dimensional (3D) transformations, offers an unconventional approach for realizing cutting-edge optical nano-electromechanical systems. Here, we demonstrate an on-chip and electromechanically reconfigurable nano-kirigami with optical functionalities. The nano-electromechanical system is built on an Au/SiO₂/Si substrate and operated via attractive electrostatic forces between the top gold nanostructure and bottom silicon substrate. Large-range nano-kirigami like 3D deformations are clearly observed and reversibly engineered, with scalable pitch size down to 0.975 μm. Broadband nonresonant and narrowband resonant optical reconfigurations are achieved at visible and near-infrared wavelengths, respectively, with a high modulation contrast up to 494%. On-chip modulation of optical helicity is further demonstrated in submicron nano-kirigami at near-infrared wavelengths. Such small-size and high-contrast reconfigurable optical nano-kirigami provides advanced methodologies and platforms for versatile on-chip manipulation of light at nanoscale.

Mechanically Reinforced Localized Structure Design to Stabilize Solid-Electrolyte Interface of the Composited Electrode of Si Nanoparticles and TiO2 Nanotubes

Silicon anode with extremely high theoretical specific capacity (≈4200 mAh g^-1 ), experiences huge volume changes during Li-ion insertion and extraction, causing mechanical fracture of Si particles and the growth of a solid-electrolyte interface (SEI), which results in a rapid capacity fading of Si electrodes. Herein, a mechanically reinforced localized structure is designed for carbon-coated Si nanoparticles (C@Si) via elongated TiO₂ nanotubes networks toward stabilizing Si electrode via alleviating mechanical strain and stabilizing the SEI layer. Benefited from the rational localized structure design, the carbon-coated Si nanoparticles/TiO₂ nanotubes composited electrode (C@Si/TiNT) exhibits an ideal electrode thickness swelling, which is lower than 1% after the first cycle and increases to about 6.6% even after 1600 cycles. While for traditional C@Si/carbon nanotube composited electrode, the initial swelling ratio is about 16.7% and reaches ≈190% after 1600 cycles. As a result, the C@Si/TiNT electrode exhibits an outstanding capacity of 1510 mAh g^-1 at 0.1 A g^-1 with high rate capability and long-time cycling performance with 95% capacity retention after 1600 cycles. The rational design on mechanically reinforced localized structure for silicon electrode will provide a versatile platform to solve the current bottlenecks for other alloyed-type electrode materials with large volume expansion toward practical applications.

Large-Scale Electric-Field Confined Silicon with Optimized Charge-Transfer Kinetics and Structural Stability for High-Rate Lithium-Ion Batteries

The stereospecific design of the interface effects can optimize the electron/Li-ion migration kinetics for energy-storage materials. In this study, an electric field was introduced to silicon-based materials (C-SiO_x@Si/rGO) through the rational construction of multi-heterostructures. This was achieved by manipulating the physicochemical properties at the atomic level of advanced Li-ion batteries (LIBs). The experimental and density functional theory calculations showed that the unbalanced charge distribution generated a large potential difference, which in turn induced a large-scale electric-field response with a boosted interfacial charge transfer in the composite. The as-prepared C-SiO_x@Si/rGO anode showed advanced rate capability (i.e., 1579.0 and 906.5 mAh g^-1 at 1000 and 8000 mA g^-1, respectively) when the migration paths of the Li-ion/electrons hierarchically optimized the large electric field. Furthermore, the C-SiO_x@Si/rGO composite with a high SiO_x@Si mass ratio (73.5 wt %) demonstrated a significantly enhanced structural stability with a 40% volume expansion. Additionally, when coupled with the LiNi_0.8Co_0.1Mn_0.1O₂ (NCM) cathode, the NCM//C-SiO_x@Si/rGO full cell delivers superior Li-ion storage properties with high reversible capacities of 157.6 and 101.4 mAh g^-1 at 500 and 4000 mA g^-1, respectively. Therefore, the electric-field introduction using optimized electrochemical reaction kinetics can assist in the construction of other high-performance LIB materials.

Kirigami/origami: unfolding the new regime of advanced 3D microfabrication/nanofabrication with "folding"

Advanced kirigami/origami provides an automated technique for modulating the mechanical, electrical, magnetic and optical properties of existing materials, with remarkable flexibility, diversity, functionality, generality, and reconfigurability. In this paper, we review the latest progress in kirigami/origami on the microscale/nanoscale as a new platform for advanced 3D microfabrication/nanofabrication. Various stimuli of kirigami/origami, including capillary forces, residual stress, mechanical stress, responsive forces, and focussed-ion-beam irradiation-induced stress, are introduced in the microscale/nanoscale region. These stimuli enable direct 2D-to-3D transformations through folding, bending, and twisting of microstructures/nanostructures, with which the occupied spatial volume can vary by several orders of magnitude compared to the 2D precursors. As an instant and direct method, ion-beam irradiation-based tree-type and close-loop nano-kirigami is highlighted in particular. The progress in microscale/nanoscale kirigami/origami for reshaping the emerging 2D materials, as well as the potential for biological, optical and reconfigurable applications, is briefly discussed. With the unprecedented physical characteristics and applicable functionalities generated by kirigami/origami, a wide range of applications in the fields of optics, physics, biology, chemistry and engineering can be envisioned.

3D Self-Assembled Microelectronic Devices: Concepts, Materials, Applications

Modern microelectronic systems and their components are essentially 3D devices that have become smaller and lighter in order to improve performance and reduce costs. To maintain this trend, novel materials and technologies are required that provide more structural freedom in 3D over conventional microelectronics, as well as easier parallel fabrication routes while maintaining compatability with existing manufacturing methods. Self-assembly of initially planar membranes into complex 3D architectures offers a wealth of opportunities to accommodate thin-film microelectronic functionalities in devices and systems possessing improved performance and higher integration density. Existing work in this field, with a focus on components constructed from 3D self-assembly, is reviewed, and an outlook on their application potential in tomorrow's microelectronics world is provided.

Hollow-structure engineering of a silicon–carbon anode for ultra-stable lithium-ion batteries

Hollow silicon nanotubes were successfully synthesized in situ on a carbon substrate, which effectively accommodate the volume expansion of silicon and exhibit ultra-stable performance as the anode of lithium-ion batteries.

Electro-mechanically controlled assembly of reconfigurable 3D mesostructures and electronic devices based on dielectric elastomer platforms

The manufacture of 3D mesostructures is receiving rapidly increasing attention, because of the fundamental significance and practical applications across wide-ranging areas. The recently developed approach of buckling-guided assembly allows deterministic formation of complex 3D mesostructures in a broad set of functional materials, with feature sizes spanning nanoscale to centimeter-scale. Previous studies mostly exploited mechanically controlled assembly platforms using elastomer substrates, which limits the capabilities to achieve on-demand local assembly, and to reshape assembled mesostructures into distinct 3D configurations. This work introduces a set of design concepts and assembly strategies to utilize dielectric elastomer actuators as powerful platforms for the electro-mechanically controlled 3D assembly. Capabilities of sequential, local loading with desired strain distributions allow access to precisely tailored 3D mesostructures that can be reshaped into distinct geometries, as demonstrated by experimental and theoretical studies of ∼30 examples. A reconfigurable inductive–capacitive radio-frequency circuit consisting of morphable 3D capacitors serves as an application example.

Transformation of 2D Planes into 3D Soft and Flexible Structures with Embedded Electrical Functionality

Three-dimensional (3D) structures composed of flexible and soft materials have been in demand for implantable biomedical devices. However, the fabrication of 3D structures using microelectromechanical system (MEMS) techniques has limitations in terms of the materials and the scale of the structures. Here, a technique to selectively bond polydimethylsiloxane (PDMS) and parylene-C by plasma treatment is reported, with which two-dimensional structures that are fabricated using MEMS techniques are turned into 3D structures by the inflation of selectively non-bonded patterns. The bonding strength and the bonding mechanism were analyzed by mechanical tests and chemical analyses, respectively. We fabricated soft and flexible 3D structures with various patterns and dimensions, even with embedded electrical functions, including light emitting diodes and electrocorticogram electrodes. Based on these results, the flexible, soft, and MEMS-capable 3D structures that are obtained by the developed selective bonding technique are promising for applications in a wide range of biomedical applications.

Micro/Nanoscale 3D Assembly by Rolling, Folding, Curving, and Buckling Approaches

The miniaturization of electronics has been an important topic of study for several decades. The established roadmaps following Moore's Law have encountered bottlenecks in recent years, as planar processing techniques are already close to their physical limits. To bypass some of the intrinsic challenges of planar technologies, more and more efforts have been devoted to the development of 3D electronics, through either direct 3D fabrication or indirect 3D assembly. Recent research efforts into direct 3D fabrication have focused on the development of 3D transistor technologies and 3D heterogeneous integration schemes, but these technologies are typically constrained by the accessible range of sophisticated 3D geometries and the complexity of the fabrication processes. As an alternative route, 3D assembly methods make full use of mature planar technologies to form predefined 2D precursor structures in the desired materials and sizes, which are then transformed into targeted 3D mesostructures by mechanical deformation. The latest progress in the area of micro/nanoscale 3D assembly, covering the various classes of methods through rolling, folding, curving, and buckling assembly, is discussed, focusing on the design concepts, principles, and applications of different methods, followed by an outlook on the remaining challenges and open opportunities.

Single-Nanostructured Electrochemical Detection for Intrinsic Mechanism of Energy Storage: Progress and Prospect

Energy storage appliances are active by means of accompanying components for renewable energy resources that play a significant role in the advanced world. To further improve the electrochemical properties of the lithium-ion batteries (LIBs), sodium-ion batteries (SIBs), and lithium-sulfur (Li-S) batteries, the electrochemical detection of the intrinsic mechanisms and dynamics of electrodes in batteries is required to guide the rational design of electrodes. Thus, several researches have conducted in situ investigations and real-time observations of electrode evolution, ion diffusion pathways, and side reactions during battery operation at the nanoscale, which are proven to be extremely insightful. However, the in situ cells are required to be compatible for electrochemical tests and are therefore often challenging to operate. In the past few years, tremendous progresses have been made with novel and more advanced in situ electrochemical detection methods for mechanism studies, especially single-nanostructured electrodes. Herein, a comprehensive review of in situ techniques based on single-nanostructured electrodes for studying electrodes changes in LIBs, SIBs, and Li-S batteries, including structure evolution, phase transition, interface formation, and the ion diffusion pathway is provided, which is instructive and meaningful for the optimization of battery systems.

Hierarchical C/SiO x /TiO2 ultrathin nanobelts as anode materials for advanced lithium ion batteries

TiO₂-based nanomaterials are demonstrated to be a promising candidate for next generation lithium ion batteries due to their stable performance and easy preparation. However, their inherent low capacity impedes their wide application compared to commercial carbon nanomaterials. Here we present a unique in situ grafting-graphitization method to achieve a ternary nanocomposite of C/SiO _x /TiO₂ ultrathin nanobelts with a core-shell heterostructure. The obtained ternary nanocomposite integrates the merits of high specific capacity of SiO _x , the excellent mechanical stability of graphite-like carbon and the high reactivity of TiO₂. Cyclic voltammetric curves and cycling performance manifest the optimal ternary nanocomposite and deliver a very high initial specific capacity of ∼1196 mA h g^-1 with both good rate capability (∼200 mA h g^-1 up to 10 C) and especially enhanced cycle stability. Our work demonstrates that building hierarchical core-shell heterostructures is an effective strategy to improve capacity and cycling performance in other composite anodes for electrochemical energy storage materials.

Nano-kirigami with giant optical chirality

Kirigami enables versatile shape transformation from two-dimensional (2D) precursors to 3D architectures with simplified fabrication complexity and unconventional structural geometries. We demonstrate a one-step and on-site nano-kirigami method that avoids the prescribed multistep procedures in traditional mesoscopic kirigami or origami techniques. The nano-kirigami is readily implemented by in situ cutting and buckling a suspended gold film with programmed ion beam irradiation. By using the topography-guided stress equilibrium, rich 3D shape transformation such as buckling, rotation, and twisting of nanostructures is precisely achieved, which can be predicted by our mechanical modeling. Benefiting from the nanoscale 3D twisting features, giant optical chirality is achieved in an intuitively designed 3D pinwheel-like structure, in strong contrast to the achiral 2D precursor without nano-kirigami. The demonstrated nano-kirigami, as well as the exotic 3D nanostructures, could be adopted in broad nanofabrication platforms and could open up new possibilities for the exploration of functional micro-/nanophotonic and mechanical devices.

Hybrid nanomembrane-based capacitors for the determination of the dielectric constant of semiconducting molecular ensembles

Considerable advances in the field of molecular electronics have been achieved over the recent years. One persistent challenge, however, is the exploitation of the electronic properties of molecules fully integrated into devices. Typically, the molecular electronic properties are investigated using sophisticated techniques incompatible with a practical device technology, such as the scanning tunneling microscopy. The incorporation of molecular materials in devices is not a trivial task as the typical dimensions of electrical contacts are much larger than the molecular ones. To tackle this issue, we report on hybrid capacitors using mechanically-compliant nanomembranes to encapsulate ultrathin molecular ensembles for the investigation of molecular dielectric properties. As the prototype material, copper (II) phthalocyanine (CuPc) has been chosen as information on its dielectric constant (k _CuPc) at the molecular scale is missing. Here, hybrid nanomembrane-based capacitors containing metallic nanomembranes, insulating Al₂O₃ layers, and the CuPc molecular ensembles have been fabricated and evaluated. The Al₂O₃ is used to prevent short circuits through the capacitor plates as the molecular layer is considerably thin (<30 nm). From the electrical measurements of devices with molecular layers of different thicknesses, the CuPc dielectric constant has been reliably determined (k _CuPc = 4.5 ± 0.5). These values suggest a mild contribution of the molecular orientation on the CuPc dielectric properties. The reported nanomembrane-based capacitor is a viable strategy for the dielectric characterization of ultrathin molecular ensembles integrated into a practical, real device technology.

Reaction-Ball-Milling-Driven Surface Coating Strategy to Suppress Pulverization of Microparticle Si Anodes

In this work, we report a novel reaction-ball-milling surface coating strategy to suppress the pulverization of microparticle Si anodes upon lithiation/delithiation. By energetically milling the partially prelithiated microparticle Si in a CO₂ atmosphere, a multicomponent amorphous layer composed of SiO _x, C, SiC, and Li₂SiO₃ is successfully coated on the surface of Si microparticles. The coating level strongly depends on the milling reaction duration, and the 12 h milled prelithiated Si microparticles (BM12h) under a pressure of 3 bar of CO₂ exhibit a good conformal coating with 1.006 g cm^-3 of tap density. The presence of SiC remarkably enhances the mechanical properties of the SiO _x/C coating matrix with an approximately 4-fold increase in the elastic modulus and the hardness values, which effectively alleviates the global volume expansion of the Si microparticles upon lithiation. Simultaneously, the existence of Li₂SiO₃ insures the Li-ion conductivity of the coating layer. Moreover, the SEI film formed on the electrode surface maintains relatively stable upon cycling due to the remarkably suppressed crack and pulverization of particles. These processes work together to allow the BM12h sample to offer much better cycling stability, as its reversible capacity remains at 1439 mAh g^-1 at 100 mA g^-1 after 100 cycles, which is nearly 4 times that of the pristine Si microparticles (381 mAh g^-1). This work opens up new opportunities for the practical applications of micrometer-scale Si anodes.

A "Sticky" Mucin-Inspired DNA-Polysaccharide Binder for Silicon and Silicon-Graphite Blended Anodes in Lithium-Ion Batteries

New binder concepts have lately demonstrated improvements in the cycle life of high-capacity silicon anodes. Those binder designs adopt adhesive functional groups to enhance affinity with silicon particles and 3D network conformation to secure electrode integrity. However, homogeneous distribution of silicon particles in the presence of a substantial volumetric content of carbonaceous components (i.e., conductive agent, graphite, etc.) is still difficult to achieve while the binder maintains its desired 3D network. Inspired by mucin, the amphiphilic macromolecular lubricant, secreted on the hydrophobic surface of gastrointestine to interface aqueous serous fluid, here, a renatured DNA-alginate amphiphilic binder for silicon and silicon-graphite blended electrodes is reported. Mimicking mucin's structure comprised of a hydrophobic protein backbone and hydrophilic oligosaccharide branches, the renatured DNA-alginate binder offers amphiphilicity from both components, along with a 3D fractal network structure. The DNA-alginate binder facilitates homogeneous distribution of electrode components in the electrode as well as its enhanced adhesion onto a current collector, leading to improved cyclability in both silicon and silicon-graphite blended electrodes.

Efficient Sodium Storage in Rolled-Up Amorphous Si Nanomembranes

Alloying-type materials are promising anodes for high-performance sodium-ion batteries (SIBs) because of their high capacities and low Na-ion insertion potentials. However, the typical candidates, such as P, Sn, Sb, and Pb, suffer from severe volume changes (≈293-487%) during the electrochemical reactions, leading to inferior cycling performances. Here, a high-rate and ultrastable alloying-type anode based on the rolled-up amorphous Si nanomembranes is demonstrated. The rolled-up amorphous Si nanomembranes show a very small volume change during the sodiation/desodiation processes and deliver an excellent rate capability and ultralong cycle life up to 2000 cycles with 85% capacity retention. The structural evolution and pseudocapacitance contribution are investigated by using the ex situ characterization techniques combined with kinetics analysis. Furthermore, the mechanism of efficient sodium-ion storage in amorphous Si is kinetically analyzed through an illustrative atomic structure with dangling bonds, offering a new perspective on understanding the sodium storage behavior. These results suggest that nanostructured amorphous Si is a promising anode material for high-performance SIBs.

Assembly and Self-Assembly of Nanomembrane Materials-From 2D to 3D

Nanoscience and nanotechnology offer great opportunities and challenges in both fundamental research and practical applications, which require precise control of building blocks with micro/nanoscale resolution in both individual and mass-production ways. The recent and intensive nanotechnology development gives birth to a new focus on nanomembrane materials, which are defined as structures with thickness limited to about one to several hundred nanometers and with much larger (typically at least two orders of magnitude larger, or even macroscopic scale) lateral dimensions. Nanomembranes can be readily processed in an accurate manner and integrated into functional devices and systems. In this Review, a nanotechnology perspective of nanomembranes is provided, with examples of science and applications in semiconductor, metal, insulator, polymer, and composite materials. Assisted assembly of nanomembranes leads to wrinkled/buckled geometries for flexible electronics and stacked structures for applications in photonics and thermoelectrics. Inspired by kirigami/origami, self-assembled 3D structures are constructed via strain engineering. Many advanced materials have begun to be explored in the format of nanomembranes and extend to biomimetic and 2D materials for various applications. Nanomembranes, as a new type of nanomaterials, allow nanotechnology in a controllable and precise way for practical applications and promise great potential for future nanorelated products.

A novel route to prepare N-graphene/SnO2 composite as a high-performance anode for lithium batteries

In this study, we report a simple method to prepare nitrogen-doped graphene, with which a nitrogen-doped graphene/SnO₂ composite was successfully fabricated and employed as a lithium battery anode.

Group IVA Element (Si, Ge, Sn)-Based Alloying/Dealloying Anodes as Negative Electrodes for Full-Cell Lithium-Ion Batteries

To satisfy the increasing energy demands of portable electronics, electric vehicles, and miniaturized energy storage devices, improvements to lithium-ion batteries (LIBs) are required to provide higher energy/power densities and longer cycle lives. Group IVA element (Si, Ge, Sn)-based alloying/dealloying anodes are promising candidates for use as electrodes in next-generation LIBs owing to their extremely high gravimetric and volumetric capacities, low working voltages, and natural abundances. However, due to the violent volume changes that occur during lithium-ion insertion/extraction and the formation of an unstable solid electrolyte interface, the use of Group IVA element-based anodes in commercial LIBs is still a great challenge. Evaluating the electrochemical performance of an anode in a full-cell configuration is a key step in investigating the possible application of the active material in LIBs. In this regard, the recent progress and important approaches to overcoming and alleviating the drawbacks of Group IVA element-based anode materials are reviewed, such as the severe volume variations during cycling and the relatively brittle electrode/electrolyte interface in full-cell LIBs. Finally, perspectives and future challenges in achieving the practical application of Group IVA element-based anodes in high-energy and high-power-density LIB systems are proposed.

Silicene Flowers: A Dual Stabilized Silicon Building Block for High-Performance Lithium Battery Anodes

Nanostructuring is a transformative way to improve the structure stability of high capacity silicon for lithium batteries. Yet, the interface instability issue remains and even propagates in the existing nanostructured silicon building blocks. Here we demonstrate an intrinsically dual stabilized silicon building block, namely silicene flowers, to simultaneously address the structure and interface stability issues. These original Si building blocks as lithium battery anodes exhibit extraordinary combined performance including high gravimetric capacity (2000 mAh g^-1 at 800 mA g^-1), high volumetric capacity (1799 mAh cm^-3), remarkable rate capability (950 mAh g^-1 at 8 A g^-1), and excellent cycling stability (1100 mA h g^-1 at 2000 mA g^-1 over 600 cycles). Paired with a conventional cathode, the fabricated full cells deliver extraordinarily high specific energy and energy density (543 Wh kg_ca^-1 and 1257 Wh L_ca^-1, respectively) based on the cathode and anode, which are 152% and 239% of their commercial counterparts using graphite anodes. Coupled with a simple, cost-effective, scalable synthesis approach, this silicon building block offers a horizon for the development of high-performance batteries.

Mechanically-Guided Deterministic Assembly of 3D Mesostructures Assisted by Residual Stresses

Formation of 3D mesostructures in advanced functional materials is of growing interest due to the widespread envisioned applications of devices that exploit 3D architectures. Mechanically guided assembly based on compressive buckling of 2D precursors represents a promising method, with applicability to a diverse set of geometries and materials, including inorganic semiconductors, metals, polymers, and their heterogeneous combinations. This paper introduces ideas that extend the levels of control and the range of 3D layouts that are achievable in this manner. Here, thin, patterned layers with well-defined residual stresses influence the process of 2D to 3D geometric transformation. Systematic studies through combined analytical modeling, numerical simulations, and experimental observations demonstrate the effectiveness of the proposed strategy through ≈20 example cases with a broad range of complex 3D topologies. The results elucidate the ability of these stressed layers to alter the energy landscape associated with the transformation process and, specifically, the energy barriers that separate different stable modes in the final 3D configurations. A demonstration in a mechanically tunable microbalance illustrates the utility of these ideas in a simple structure designed for mass measurement.

Rice Husk Silica-Derived Nanomaterials for Battery Applications: A Literature Review

Silica-rich rice husk (RH) is an abundant and sustainable agricultural waste. The recovery of value-added products from RH or its ash to explore an economic way for the valorization of agricultural wastes has attracted wide attention. For instance, RH can be converted to biofuels and biochars simultaneously via thermochemical processes. In general, the applications of RH biochars include soil remediation, pollutant removal, silicon battery materials, and so forth. This review concludes recent progress in the synthesis of RH-derived silicon materials for lithium-ion battery (LIB) applications. Silica nanomaterials produced from RH are initially discussed. RH amorphous silica can also be fabricated to crystal silicon used for battery materials via widely used magnesiothermic reduction. However, the RH-derived Si nanoparticles suffer from a low Coulombic efficiency in the initial charge/discharge and limited cycle life as anode materials due to high surface reactions and low thermodynamic stability. The synthesis of Si materials with nano/microhierarchical structure would be an ideal way to improve their electrochemical performances. Embedding nano-Si into 3D conductive matrix is an effective way to improve the structural stability. Among the Si/carbon composite materials, carbon nanotubdes (CNTs) are a promising matrix due to the wired morphology, high electronic conductivity, and robust structure. Additionally, CNTs can easily form 3D cross-linked conducting networks, ensuring effective electron transportation among active particles. Si nanomaterials with microhierarchical structures in which CNTs are tightly intertwined between the RH-derived Si nanoparticles have been proven to be ideal LIB anode materials.

A bio-inspired nanofibrous silicon/carbon composite as an anode material for lithium-ion batteries

A nanofibrous silicon/carbon composite derived from a cellulose substance was fabricated, showing enhanced electrochemical performances as an anode material for lithium-ion batteries.

Si nanorod arrays modified with metal–organic segments as anodes in lithium ion batteries

Metal–organic segments (MOSs) were synthesized to composite with Si nanorod (NR) arrays as electrodes in lithium ion batteries (LIBs).

Mechanical assembly of complex, 3D mesostructures from releasable multilayers of advanced materials

Capabilities for assembly of three-dimensional (3D) micro/nanostructures in advanced materials have important implications across a broad range of application areas, reaching nearly every class of microsystem technology. Approaches that rely on the controlled, compressive buckling of 2D precursors are promising because of their demonstrated compatibility with the most sophisticated planar technologies, where materials include inorganic semiconductors, polymers, metals, and various heterogeneous combinations, spanning length scales from submicrometer to centimeter dimensions. We introduce a set of fabrication techniques and design concepts that bypass certain constraints set by the underlying physics and geometrical properties of the assembly processes associated with the original versions of these methods. In particular, the use of releasable, multilayer 2D precursors provides access to complex 3D topologies, including dense architectures with nested layouts, controlled points of entanglement, and other previously unobtainable layouts. Furthermore, the simultaneous, coordinated assembly of additional structures can enhance the structural stability and drive the motion of extended features in these systems. The resulting 3D mesostructures, demonstrated in a diverse set of more than 40 different examples with feature sizes from micrometers to centimeters, offer unique possibilities in device design. A 3D spiral inductor for near-field communication represents an example where these ideas enable enhanced quality (Q) factors and broader working angles compared to those of conventional 2D counterparts.

Template Free and Binderless NiO Nanowire Foam for Li-ion Battery Anodes with Long Cycle Life and Ultrahigh Rate Capability

Herein, NiO-decorated Ni nanowires with diameters ca. 30-150 nm derived from Ni wire backbone (ca. 2 μm in diameter) is directly synthesized on commercially available Ni foam as a renovated anode for Li-ion batteries. Excellent stability with capacity 680 mAh g(-1) at 0.5C (1C = 718 mA g(-1)) is achieved after 1000 cycles. Superior rate capability is exhibited by cycling at extremely high current rates, such as 20C and 50C with capacities ca. 164 and 75 mAh g(-1), respectively. The capacity can be recovered back to ca. 430 mAh g(-1) in 2 cycles when lowered to 0.2C and stably cycled for 430 times with capacity 460 mAh g(-1). The NiO nanowire foam anode possesses low equivalent series resistance ca. 3.5 Ω, resulting in superior power performance and low resistive losses. The NiO nanowire foam can be manufactured with bio-friendly chemicals and low temperature processes without any templates, binders and conductive additives, which possesses the potential transferring from lab scale to industrial production.

High-Performance Three-Dimensional Tubular Nanomembrane Sensor for DNA Detection

We report an ultrasensitive label-free DNA biosensor with fully on-chip integrated rolled-up nanomembrane electrodes. The hybridization of complementary DNA strands (avian influenza virus subtype H1N1) is selectively detected down to attomolar concentrations, an unprecedented level for miniaturized sensors without amplification. Impedimetric DNA detection with such a rolled-up biosensor shows 4 orders of magnitude sensitivity improvement over its planar counterpart. Furthermore, it is observed that the impedance response of the proposed device is contrary to the expected behavior due to its particular geometry. To further investigate this difference, a thorough model analysis of the measured signal and the electric field calculation is performed, revealing enhanced electron hopping/tunneling along the DNA chains due to an enriched electric field inside the tube. Likewise, conformational changes of DNA might also contribute to this effect. Accordingly, these highly integrated three-dimensional sensors provide a tool to study electrical properties of DNA under versatile experimental conditions and open a new avenue for novel biosensing applications (i.e., for protein, enzyme detection, or monitoring of cell behavior under in vivo like conditions).

Bimorph Silk Microsheets with Programmable Actuating Behavior: Experimental Analysis and Computer Simulations

Microscaled self-rolling construct sheets from silk protein material have been fabricated, containing a silk bimorph composed of silk ionomers as an active layer and cross-linked silk β-sheet as the passive layer. The programmable morphology was experimentally explored along with a computational simulation to understand the mechanism of shape reconfiguration. The neutron reflectivity shows that the active silk ionomers layer undergoes remarkable swelling (eight times increase in thickness) after deprotonation while the passive silk β-sheet retains constant volume under the same conditions and supports the bimorph construct. This selective swelling within the silk-on-silk bimorph microsheets generates strong interfacial stress between layers and out-of-plane forces, which trigger autonomous self-rolling into various 3D constructs such as cylindrical and helical tubules. The experimental observations and computational modeling confirmed the role of interfacial stresses and allow programming the morphology of the 3D constructs with particular design. We demonstrated that the biaxial stress distribution over the 2D planar films depends upon the lateral dimensions, thickness and the aspect ratio of the microsheets. The results allow the fine-tuning of autonomous shape transformations for the further design of complex micro-origami constructs and the silk based rolling/unrolling structures provide a promising platform for polymer-based biomimetic devices for implant applications.