Symmetry-Guided Synthesis of Highly Porous Metal-Organic Frameworks with Fluorite Topology

In situ confinement of ultra-small metal nanoparticles in redox-active zirconium MOFs for catalysis

Herein, we successfully fabricated ultra-small metal nanoparticles into two stable Zr-based metal-organic frameworks via in situ redox reactions between triphenylamine and the corresponding metal ions to afford Pd NPs@1 and Pd NPs@2, which exhibit excellent activity and reusability for Suzuki coupling reactions as heterogeneous catalysts.

Metal Ion-Induced Acid Hydrolysis Strategy for the One-Step Synthesis of Tough and Highly Transparent Hydrolyzed Polyacrylamide Hydrogels

Polyacrylamide (PAM) hydrogel is hard to enhance through coordination bonds because amide groups rarely coordinate with metal ions strongly in an aqueous solution. It is known that the aqueous solution of ZrOCl2.8H2O can be strongly acidic depending on its concentration. Consequently, through a facile one-step metal ion-induced acid hydrolysis strategy (MIAHS), tough and highly transparent hydrolyzed PAM physical hydrogels are prepared by using ZrOCl2.8H2O in this work. The formation of the partially hydrolyzed PAM physical hydrogels elucidates that the side reaction of imidization during common acid hydrolysis of PAM can be perfectly overcome because the structure of the Zr(IV) ion and its interaction with amide groups promote selective acidic hydrolysis from amide to carboxyl groups. Compared to most coordination cross-linked hydrogels, which need at least two-step fabrication, the hydrolyzed PAM hydrogel via MIAHS can be obtained by one-step synthesis due to the weak interaction between amide groups and Zr(IV). The obtained PAM hydrogel cross-linked by hydrogen bonds and coordination bond between Zr(IV) and carboxyl is a multibond network (MBN) and can achieve hierarchical energy dissipation, which exhibits excellent mechanical properties (tensile strength of 3.15 MPa, elongation at break of 890%, and toughness of 17.0 MJ m-3), high transparence (transmittance of 95%), and outstanding conductivity (5.6 S m-1) at water content of 80 wt %. The high gauge factor (from 2.24 to 12.8 as the strain increases from 0 to 400%) endows the hydrolyzed PAM hydrogels with promising application as strain sensors. Furthermore, in addition to ZrOCl2.8H2O, the fact that various hydrolyzable compounds of Ti(IV), Zr(IV) Hf(IV), and Sn(IV) can also fabricate tough hydrolyzed PAM hydrogels verifies the universality of MIAHS. Therefore, the simple, efficient, and universal MIAHS will shed new light on preparing functional PAM-based hydrogels.

Metalation of metal-organic frameworks: fundamentals and applications

Metalation of metal-organic frameworks (MOFs) has been developed as a prominent strategy for materials functionalization for pore chemistry modulation and property optimization. By introducing exotic metal ions/complexes/nanoparticles onto/into the parent framework, many metallized MOFs have exhibited significantly improved performance in a wide range of applications. In this review, we focus on the research progress in the metalation of metal-organic frameworks during the last five years, spanning the design principles, synthetic strategies, and potential applications. Based on the crystal engineering principles, a minor change in the MOF composition through metalation would lead to leveraged variation of properties. This review starts from the general strategies established for the incorporation of metal species within MOFs, followed by the design principles to graft the desired functionality while maintaining the porosity of frameworks. Facile metalation has contributed a great number of bespoke materials with excellent performance, and we summarize their applications in gas adsorption and separation, heterogeneous catalysis, detection and sensing, and energy storage and conversion. The underlying mechanisms are also investigated by state-of-the-art techniques and analyzed for gaining insight into the structure-property relationships, which would in turn facilitate the further development of design principles. Finally, the current challenges and opportunities in MOF metalation have been discussed, and the promising future directions for customizing the next-generation advanced materials have been outlined as well.

Topology Prediction of Gas-Separating Metal-Organic Frameworks with Low Symmetry Vertices

Topology serves as a blueprint for the construction of reticular structures such as metal-organic frameworks, especially for those based on building blocks with highly symmetrical shapes. However, it remains a challenge to predict the topology of the frameworks from less symmetrical units, because their corresponding vertex figures are largely deformed from the perfect geometries with no "default" net embedding. Furthermore, vertices involving flexible units may have multiple shape choices, and the competition among their designated topologies makes the structure prediction in large uncertainty. Herein, the deformation index is proposed to characterize the symmetry loss of the vertex figure by comparing it with its ideal geometry. The mathematical index is employed to predict the shapes of two in situ formed Co-based metalloligands (pseudo-tetrahedron and pseudo-square), which further dictate the framework topology (flu and scu) when they are joined with the [Zr6O8]-based cuboid units. The two frameworks with very similar constituents provide an ideal platform to investigate how the pore shapes and interconnectivity influence the gas separation. The net with cylindrical channels outperforms the other with discreate cages in C3H8/C2H6/CH4 separation, benefiting from the facile accessibility of its interaction sites to the guests imposed by the specific framework topology.

Precise Distance Control and Functionality Adjustment of Frustrated Lewis Pairs in Metal-Organic Frameworks

We report the construction of frustrated Lewis pairs (FLPs) in a metal-organic framework (MOF), where both Lewis acid (LA) and Lewis base (LB) are fixed to the backbone. The anchoring of a tritopic organoboron linker as LA and a monotopic linker as LB to separate metal oxide clusters in a tetrahedron geometry allows for the precise control of distance between them. As the type of monotopic LB linker varies, pyridine, phenol, aniline, and benzyl alcohol, a series of 11 FLPs were constructed to give fixed distances of 7.1, 5.5, 5.4, and 4.8 Å, respectively, revealed by 11B-1H solid-state nuclear magnetic resonance spectroscopy. Keeping LA and LB apart by a fixed distance makes it possible to investigate the electrostatic effect by changing the functional groups in the monotopic LB linker, while the LA counterpart remains unaffected. This approach offers new chemical environments of the active site for FLP-induced catalysis.

Enhancing Drug Delivery Efficacy Through Bilayer Coating of Zirconium-Based Metal-Organic Frameworks: Sustained Release and Improved Chemical Stability and Cellular Uptake for Cancer Therapy

The development of nanoparticle (NP)-based drug carriers has presented an exciting opportunity to address challenges in oncology. Among the 100,000 available possibilities, zirconium-based metal-organic frameworks (MOFs) have emerged as promising candidates in biomedical applications. Zr-MOFs can be easily synthesized as small-size NPs compatible with intravenous injection, whereas the ease of decorating their external surfaces with functional groups allows for targeted treatment. Despite these benefits, Zr-MOFs suffer degradation and aggregation in real, in vivo conditions, whereas the loaded drugs will suffer the burst effect-i.e., the fast release of drugs in less than 48 h. To tackle these issues, we developed a simple but effective bilayer coating strategy in a generic, two-step process. In this work, bilayer-coated MOF NU-901 remained well dispersed in biologically relevant fluids such as buffers and cell growth media. Additionally, the coating enhances the long-term stability of drug-loaded MOFs in water by simultaneously preventing sustained leakage of the drug and aggregation of the MOF particles. We evaluated our materials for the encapsulation and transport of pemetrexed, the standard-of-care chemotherapy in mesothelioma. The bilayer coating allowed for a slowed release of pemetrexed over 7 days, superior to the typical 48 h release found in bare MOFs. This slow release and the related performance were studied in vitro using both A549 lung cancer and 3T mesothelioma cells. Using high-resolution microscopy, we found the successful uptake of bilayer-coated MOFs by the cells with an accumulation in the lysosomes. The pemetrex-loaded NU-901 was indeed cytotoxic to 3T and A549 cancer cells. Finally, we demonstrated the general approach by extending the coating strategy using two additional lipids and four surfactants. This research highlights how a simple yet effective bilayer coating provides new insights into the design of promising MOF-based drug delivery systems.

Recent advances in metal-organic frameworks for stimuli-responsive drug delivery

After entering the human body, drugs for treating diseases, which are prone to delivery and release in an uncontrolled manner, are affected by various factors. Based on this, many researchers utilize various microenvironmental changes encountered during drug delivery to trigger drug release and have proposed stimuli-responsive drug delivery systems. In recent years, metal-organic frameworks (MOFs) have become promising stimuli-responsive agents to release the loaded therapeutic agents at the target site to achieve more precise drug delivery due to their high drug loading, excellent biocompatibility, and high stimuli-responsiveness. The MOF-based stimuli-responsive systems can respond to various stimuli under pathological conditions at the site of the lesion, releasing the loaded therapeutic agent in a controlled manner, and improving the accuracy and safety of drug delivery. Due to the changes in different physical and chemical factors in the pathological process of diseases, the construction of stimuli-responsive systems based on MOFs has become a new direction in drug delivery and controlled release. Based on the background of the rapidly increasing attention to MOFs applied in drug delivery, we aim to review various MOF-based stimuli-responsive drug delivery systems and their response mechanisms to various stimuli. In addition, the current challenges and future perspectives of MOF-based stimuli-responsive drug delivery systems are also discussed in this review.

Postsynthetic Modification of the Nonanuclear Node in a Zirconium Metal-Organic Framework for Photocatalytic Oxidation of Hydrocarbons

Heterogeneous catalysis plays an indispensable role in chemical production and energy conversion. Incorporation of transition metals into metal oxides and zeolites is a common strategy to fine-tune the activity and selectivity of the resulting solid catalysts, as either the active center or promotor. Studying the underlying mechanism is however challenging. Decorating the metal-oxo clusters with transition metals in metal-organic frameworks (MOFs) via postsynthetic modification offers a rational approach to construct well-defined structural models for better understanding of the reaction mechanism. Therefore, it is important to expand the materials scope beyond the currently widely studied zirconium MOFs consisting of Zr6 nodes. In this work, we report the design and synthesis of a new (4,12)-connected Zr-MOF with ith topology that consists of rare Zr9 nodes. FeIII was further incorporated onto the Zr9 nodes of the framework, and the resulting MOF material exhibits significantly enhanced activity and selectivity toward the photocatalytic oxidation of toluene. This work demonstrates a delicate ligand design strategy to control the nuclearity of Zr-oxo clusters, which further dictates the number and binding sites of transition metals and the overall photocatalytic activity toward C-H activation. Our work paves the way for future exploration of the structure-activity study of catalysts using MOFs as the model system.

Unlocking New Topologies in Zr-Based Metal-Organic Frameworks by Combining Linker Flexibility and Building Block Disorder

The outstanding diversity of Zr-based frameworks is inherently linked to the variable coordination geometry of Zr-oxo clusters and the conformational flexibility of the linker, both of which allow for different framework topologies based on the same linker-cluster combination. In addition, intrinsic structural disorder provides a largely unexplored handle to further expand the accessibility of novel metal-organic framework (MOF) structures that can be formed. In this work, we report the concomitant synthesis of three topologically different MOFs based on the same M₆O₄(OH)₄ clusters (M = Zr or Hf) and methane-tetrakis(p-biphenyl-carboxylate) (MTBC) linkers. Two novel structural models are presented based on single-crystal diffraction analysis, namely, cubic c-(4,12)MTBC-M₆ and trigonal tr-(4,12)MTBC-M₆, which comprise 12-coordinated clusters and 4-coordinated tetrahedral linkers. Notably, the cubic phase features a new architecture based on orientational cluster disorder, which is essential for its formation and has been analyzed by a combination of average structure refinements and diffuse scattering analysis from both powder and single-crystal X-ray diffraction data. The trigonal phase also features structure disorder, although involving both linkers and secondary building units. In both phases, remarkable geometrical distortion of the MTBC linkers illustrates how linker flexibility is also essential for their formation and expands the range of achievable topologies in Zr-based MOFs and its analogues.

Zr- and Ti-based metal-organic frameworks: synthesis, structures and catalytic applications

Recently, Zr- and Ti-based metal-organic frameworks (MOFs) have gathered increasing interest in the field of chemistry and materials science, not only for their ordered porous structure, large surface area, and high thermal and chemical stability, but also for their various potential applications. Particularly, the unique features of Zr- and Ti-based MOFs enable them to be a highly versatile platform for catalysis. Although much effort has been devoted to developing Zr- and Ti-based MOF materials, they still suffer from difficulties in targeted synthesis, especially for Ti-based MOFs. In this Feature Article, we discuss the evolution of Zr- and Ti-based MOFs, giving a brief overview of their synthesis and structures. Furthermore, the catalytic uses of Zr- and Ti-based MOF materials in the previous 3-5 years have been highlighted. Finally, perspectives on the Zr- and Ti-based MOF materials are also proposed. This work provides in-depth insight into the advances in Zr- and Ti-based MOFs and boosts their catalytic applications.

Visible-Light-Induced Phenoxyl Radical-based Metal-Organic Framework for Selective Photooxidation of Sulfides

Phenoxyl radicals originating from phenols through oxidation or photoinduction are relatively stable and exhibit mild oxidative activity, which endows them with the potential for photocatalysis. Herein, a stable and recyclable metal-organic framework Zr-MOF-OH constructed of a binaphthol derivative ligand has been synthesized and functions as an efficient heterogeneous photocatalyst. Zr-MOF-OH shows fairly good catalytic activity and substrate compatibility toward the selective oxidation of sulfides to sulfoxides under visible light irradiation. Such irradiation of Zr-MOF-OH converts the phenolic hydroxyl groups of the binaphthol derivative ligand to phenoxyl radicals through excited state intramolecular proton transfer, and the excited state photocatalyst triggers the single-electron oxidation of the sulfide. No reactive oxygen species are produced in the photocatalytic process, and triplet O₂ directly participates in the reaction, endowing Zr-MOF-OH with wide substrate compatibility and high selectivity, which also proposes a promising pathway for the direct activation of substrates via phenoxyl radicals.

Sr(II) and Ba(II) Alkaline Earth Metal-Organic Frameworks (AE-MOFs) for Selective Gas Adsorption, Energy Storage, and Environmental Application

Two new alkaline earth metal-organic frameworks (AE-MOFs) containing Sr(II) (UPJS-15) or Ba(II) (UPJS-16) cations and extended tetrahedral linker (MTA) were synthesized and characterized in detail (UPJS stands for University of Pavol Jozef Safarik). Single-crystal X-ray analysis (SC-XRD) revealed that the materials are isostructural and, in their frameworks, one-dimensional channels are present with the size of ~11 × 10 Ų. The activation process of the compounds was studied by the combination of in situ heating infrared spectroscopy (IR), thermal analysis (TA) and in situ high-energy powder X-ray diffraction (HE-PXRD), which confirmed the stability of compounds after desolvation. The prepared compounds were investigated as adsorbents of different gases (Ar, N₂, CO₂, and H₂). Nitrogen and argon adsorption measurements showed that UPJS-15 has S_BET area of 1321 m² g^-1 (Ar) / 1250 m² g^-1 (N₂), and UPJS-16 does not adsorb mentioned gases. From the environmental application, the materials were studied as CO₂ adsorbents, and both compounds adsorb CO₂ with a maximum capacity of 22.4 wt.% @ 0 °C; 14.7 wt.% @ 20 °C and 101 kPa for UPJS-15 and 11.5 wt.% @ 0°C; 8.4 wt.% @ 20 °C and 101 kPa for UPJS-16. According to IAST calculations, UPJS-16 shows high selectivity (50 for CO₂/N₂ 10:90 mixture and 455 for CO₂/N₂ 50:50 mixture) and can be applied as CO₂ adsorbent from the atmosphere even at low pressures. The increased affinity of materials for CO₂ was also studied by DFT modelling, which revealed that the primary adsorption sites are coordinatively unsaturated sites on metal ions, azo bonds, and phenyl rings within the MTA linker. Regarding energy storage, the materials were studied as hydrogen adsorbents, but the materials showed low H₂ adsorption properties: 0.19 wt.% for UPJS-15 and 0.04 wt.% for UPJS-16 @ -196 °C and 101 kPa. The enhanced CO₂/H₂ selectivity could be used to scavenge carbon dioxide from hydrogen in WGS and DSR reactions. The second method of applying samples in the area of energy storage was the use of UPJS-15 as an additive in a lithium-sulfur battery. Cyclic performance at a cycling rate of 0.2 C showed an initial discharge capacity of 337 mAh g^-1, which decreased smoothly to 235 mAh g^-1 after 100 charge/discharge cycles.

Zr-Based Metal-Organic Frameworks with Phosphoric Acids for the Photo-Oxidation of Sulfides

Heterogeneous Brønsted acidic catalysts such as phosphoric acids are the conventional activators for organic transformations. However, the photocatalytic performance of these catalysts is still rarely explored. Herein, a novel Zr-based metal-organic framework Zr-MOF-P with phosphoric acids as a heterogeneous photocatalyst has been fabricated, which shows high selectivity and reactivity towards the photo-oxidation of sulfides under white light illumination. A mechanism study indicates that the selective oxygenation of sulfides occurs with triplet oxygen rather than common reactive oxygen species (ROS). When Zr-MOF-P is irradiated, the hydroxyl group of phosphoric acid is converted into oxygen radical, which takes an electron from the sulfides, and then the activated substrates react with the triplet oxygen to form sulfoxides, avoiding the destruction of the catalysts and endowing the reaction with high substrate compatibility and fine recyclability.

Recent developments in MOF and MOF based composite as potential adsorbents for removal of aqueous environmental contaminants

With the growth of globalization which has been the primary cause of water pollution, it is utmost necessary for us living being to have access to clean water for the purpose of drinking, washing and various other useful applications. With the purpose of future security and to restore our ecological balance, it is essential to give much significance towards the removal of unwanted toxic contaminants from our water resources. In this regard adsorptive removal of toxic pollutants from wastewater with porous adsorbent is regarded as one of the most promising way for water decontamination process. Metal organic frameworks (MOFs) comprising of uniformly arranged pores, abundant active sites and containing an easily tunable structure has aroused as a promising material for adsorbent to remove the unwanted contaminants from water sources. The adsorption of pollutants by the different MOFs surface are driven by various interactions including π-π, acid-base, electrostatic and H-bonding etc. On the other hand, the removal of various contaminants by MOFs is influenced by various factors including pH, temperature and initial concentration. In this review we will specifically discuss the adsorptive removal of different organic and inorganic pollutants present in our water systems with the use of MOFs as adsorbent along with the various factors and interaction mechanism manipulating the adsorption behaviour.

A review of synthesis, fabrication, and emerging biomedical applications of metal-organic frameworks

The overwhelming potential of porous coordination polymers (PCP), also known as Metal-Organic Frameworks (MOFs), especially their nanostructures for various biomedical applications, have made these materials worth investigating for more applications and uses. MOFs unique structure has enabled them for most applications, particularly in biomedical and healthcare. A number of very informative review papers are available on the biomedical applications of MOFs for the reader's convenience. However, many of those reviews focus mainly on drug delivery applications, and no significant work has been reported on other MOFs for biomedical applications. This review aims to present a compact and highly informative global assessment of the recent developments in biomedical applications (excluding drug-delivery) of MOFs along with critical analysis. Researchers have recently adopted both synthetic and post-synthetic routes for the fabrication and modification of MOFs that have been discussed and analyzed. A critical review of the latest reports on the significant and exotic area of bio-sensing capabilities and applications of MOFs has been given in this study. In addition, other essential applications of MOFs, including photothermal therapy, photodynamic therapy, and antimicrobial activities, are also included. These recently grown emergent techniques and cancer treatment options have gained attention and require further investigations to achieve fruitful outcomes. MOF's role in these applications has been thoroughly discussed, along with future challenges and valuable suggestions for the research community that will help meet future demands.

Structure Tuning of Hafnium Metal–Organic Frameworks through a Mixed Solvent Approach

The recent development of water-stable metal–organic frameworks (MOFs) has significantly broadened the application scope of this emerging type of porous material. Structure tuning of hafnium MOFs is less studied compared with zirconium MOFs. In this work, we report the synthesis of a mesoporous hafnium MOF, csq-MOF-1, through finely tuning the solvent mixture ratio. The successful synthesis of csq-MOF-1 also relies on the linker flexibility as linker bending and a symmetry decrease were observed in this framework as compared to its structural isomer NPF-300 (Hf). The mesoporous feature and permanent porosity were determined by the N2 adsorption at 77 K. Such a hierarchical pore feature is expected to enable a variety of applications through encapsulation of large functional molecules. The synthetic strategy of utilizing a mixed solvent and flexible linker is expected to inspire the development of new hafnium MOFs with diverse topological structures.

Recent Advances in MOF-Based Adsorbents for Dye Removal from the Aquatic Environment

The adsorptive removal of dyes from industrial wastewater using commercially available adsorbents is not significantly efficient. Metal–organic frameworks (MOFs) offer outstanding properties which can boost the separation performance over current commercial adsorbents and hence, these materials represent a milestone in improving treatment methods for dye removal from water. Accordingly, in this paper, the recent studies in the modification of MOF structures in dye removal from the aquatic environment have been discussed. This study aims to elaborate on the synthetic strategies applied to improve the adsorption efficiency and to discuss the major adsorption mechanisms as well as the most influential parameters in the adsorptive removal of dyes using MOFs. More particularly, the advanced separation performance of MOF-based adsorbents will be comprehensively explained. The introduction of various functional groups and nanomaterials, such as amine functional groups, magnetic nanoparticles, and carbon-based materials such as graphene oxide and CNT, onto the MOFs can alter the removal efficiency of MOF-based adsorbents through enhancing the water stability, dispersion in water, interactions between the MOF structure and the contaminant, and the adsorption capacity. Finally, we summarize the challenges experienced by MOF-based materials for dye removal from water and propose future research outlooks to be considered.

Photo/Electrochromic Dual Responsive Behavior of a Cage-like Zr(IV)-Viologen Metal-Organic Polyhedron (MOP)

Stable stimulus-responsive materials are highly desirable due to their widespread potential applications and growing demand in recent decades. Despite the fact that viologen derivatives have long been known as excellent photochromic and electrochromic materials, the development of stable viologen-based multifunctional smart materials with short coloration times remains an exciting topic. To obtain photochromic and electrochromic dual responsive materials, embedding the viologen ligand into a robust metal oxide cluster to increase its stability and sensitivity is an effective strategy. Herein, a viologen-based metal-organic polyhedron (MOP) {[Zr₆L₃(μ₃-O)₂(μ₂-OH)₆Cp₆]·8Cl·CH₃OH·DMF} [Zr-MOP-1; H₂L·2Cl = 1,1'-bis(4-carboxyphenyl)-4,4'-bipyridinium dichloride, and Cp = η⁵-C₅H₅] was successfully prepared and characterized. It consists of trinuclear Zr-oxygen secondary building units and exhibits reversible photochromic and electrochromic dual responsive behaviors. As expected, the designed robust viologen-based nanocage with a V₂E₃ (V = vertex, and E = edge) topology can maintain its stability and rapid photo/electrochromic behaviors with an obvious reversible change in color from purple (brown) to green, mainly due to the enclosed cluster structure and the abundant free viologen radicals that originate from the effective Cl → N and O → N electron transfers. Spectroelectrochemistry and theoretical calculations of this Zr-MOP were also performed to verify the chromic mechanism.

Syntheses, structures, and luminescence properties of five new coordination polymers based on 3-carboxy-1-(3′-carboxybenzyl)-2-oxidopyridinium and neutral ligands

Five CPs have been synthesized by a new semi-rigid dicarboxyl ligand and neutral ligands under hydrothermal conditions, and their luminescent sensing experiments for different small molecules/ions were studied in detail.

Symmetry-Guided Synthesis of N,N'-Bicarbazole and Porphyrin-Based Mixed-Ligand Metal-Organic Frameworks: Light Harvesting and Energy Transfer

In the past decades, many attempts have been made to mimic the energy transfer (EnT) in photosynthesis, a key process occurring in nature that is of fundamental significance in solar fuels and sustainable energy. Metal-organic frameworks (MOFs), an emerging class of porous crystalline materials self-assembled from organic linkers and metal or metal cluster nodes, offer an ideal platform for the exploration of directional EnT phenomena. However, placing energy donor and acceptor moieties within the same framework with an atomistic precision appears to be a major synthesis challenge. In this work, we report the design and synthesis of a highly porous and photoactive N,N'-bicarbazole- and porphyrin-based mixed-ligand MOF, namely, NPF-500-H₂TCPP (NPF = Nebraska porous framework; H₂TCPP = meso-tetrakis(4-carboxyphenyl)porphyrin), where the secondary ligand H₂TCPP is incorporated precisely through the open metal sites of the equatorial plane of the octahedron cage resulting from the underlying (4,8) connected network of NPF-500. The efficient EnT process from N,N'-bicarbazole to porphyrin in NPF-500-H₂TCPP was captured by time-resolved spectroscopy and exemplified by photocatalytic oxidation of thioanisole. These results demonstrate not only the capability of NPF-500 as the scaffold to precisely arrange the donor-acceptor assembly for the EnT process but also the potential to directly utilize the EnT process for photocatalytic applications.

Development of Au-Pd@UiO-66-on-ZIF-L/CC as a self-supported electrochemical sensor for in situ monitoring of cellular hydrogen peroxide

Integrating metal-organic frameworks (MOFs) of different components or structures together and exploiting them as electrochemical sensors for electrochemical sensing has aroused great interest. Furthermore, the incorporation of noble metals with MOFs is conducive to the improvement of catalytic performance. In this work, Pd@UiO-66-on-ZIF-L nanomaterials were successfully synthesised onto a self-supported flexible carbon cloth (Pd@UiO-66-on-ZIF-L/CC) through a novel strategy called MOF-on-MOF. Then, Au nanoparticles were electrodeposited onto Pd@UiO-66-on-ZIF-L/CC to obtain Au-Pd@UiO-66-on-ZIF-L/CC, which can serve as an excellent electrocatalyst for the reduction of hydrogen peroxide (H₂O₂). The obtained flower-like Pd@UiO-66-on-ZIF-L/CC hybrid MOF changes the structure of the monomeric MOF alone and adds more attachment sites. The synergy of the bimetals greatly improved the catalytic performance of the as-developed sensor. Electrochemical experiment results show that the proposed sensor based on Au-Pd@UiO-66-on-ZIF-L/CC has an extended linear range from 1 μM to 19.6 mM with a sensitivity of 390 μA mM^-1 cm^-2, and a low limit of detection (LOD) of 21.2 nM (S/N = 3). Moreover, it has good anti-interference, reproducibility, repeatability and excellent stability. Furthermore, the real-time in situ detection of H₂O₂ secreted from human adenocarcinomic alveolar basal epithelial cells (A549 cells) was achieved by culturing cells on Au-Pd@UiO-66-on-ZIF-L/CC, which indicates the potential of the sensor for applications in cancer pathology. Both the synthesis strategy and the sensor design provide new methods and ideas for the production of ultrasensitive H₂O₂ electrochemical sensors.

Evolution of 14-Connected Zr6 Secondary Building Units through Postsynthetic Linker Incorporation

Two new zirconium MOFs, WSU-6 and WSU-7, were synthesized through postsynthetic modifications. In both cases, linker insertion was conducted on a MOF consisting of eight-connected (8-c) Zr6 cluster and four-connected (4-c) ETTC linker, WSU-5, which possesses the uncommon 4, 8-c scu-c topology. The insertion of 1, 4-benzenedicarboxylate into the MOF formed the new 4, 12-c mjh topology, WSU-6. Interestingly, when 2, 6-naphthalenedicarboxylate was inserted, WSU-7 can be formed, which possesses a new 4, 14-c jkz topology. WSU-7 contains very rare 14-c Zr6 secondary building units (SBUs) and is the first MOF to have a Zr6 SBUs with connectivity greater than 12. The three Zr-MOFs were structurally characterized, and the photoluminescence properties of the materials were also studied.

Chiral Fluorescent Metal-Organic Framework with a Pentanuclear Copper Cluster as an Efficient Luminescent Probe for Dy3+ Ion and Cyano Compounds

Luminescent probes have been used for the detection of various heavy metals and toxic compounds. A novel sensor with excellent sensitivity and selectivity is in high demand. Herein, we designed and synthesized a three-dimensional copper-organic framework of "pcu" α-Po primitive cubic topology with a Schläfli symbol of {4.4.4.4.4.4.4.4.4.4.4.4.*.*.*}. By taking advantage of metal clusters and a triazole ligand as the metal-organic framework (MOF) components, the newly obtained MOF is stable in various environments and can be potentially used as the sensor. Remarkably, this MOF-based sensor shows high sensitivity and selectivity toward a dysprosium ion (Dy³⁺) in a multiple-lanthanide mixed solution. Besides, it exhibits luminescent quenching toward various cyano compounds. This chiral cluster-based network provides a potential luminescent probe for various inorganic and organic compounds with high sensitivity and selectivity.

Ultrastable Zirconium-Based Cationic Metal-Organic Frameworks for Perrhenate Removal from Wastewater

The effective removal of radioactive ⁹⁹TcO₄^- anion from nuclear wastewater remains a very difficult unsolved problem. Functional adsorbent materials with high stability, anion-exchange capacity, excellent selectivity, and recyclability are much needed to solve this problem. In this work, we designed two stable cationic metal-organic frameworks (MOFs)-Zr-tcbp-Me and Zr-tcpp-Me-for possible use as adsorbent materials to remove ⁹⁹TcO₄^-. Both compounds were synthesized by solvothermal reactions of the tetracarboxylate ligand with zirconium salt, followed by postsynthetic modification (N-methylation). The crystallinity of both zirconium-based MOFs can be well retained under harsh conditions, and they exhibit high adsorption capacity and selectivity toward ReO₄^- anion, a nonradioactive analogue of ⁹⁹TcO₄^-. Zr-tcbp-Me and Zr-tcpp-Me demonstrate the highest framework stability toward acidity among all previously reported cationic MOFs that have been tested for perrhenate removal from wastewater.

Dual functions of pH-sensitive cation Zr-MOF for 5-Fu: large drug-loading capacity and high-sensitivity fluorescence detection

Nanomaterials, as carriers of small molecular drugs, have been a focal point in recent years. In this work, a carbazolyl functionalized metal-organic framework, UiO-67-CDC, was successfully synthesized employing the ligand 9H-carbazole-2,7-dicarboxylic acid (9H-2,7-CDC). Postsynthetic approaches targeted the cationization and replacement of the Lewis base carbazole site with two methyl groups, resulting in the positively charged skeleton, which has proven to be a promising carrier for the anticancer drug 5-fluorouracil (5-Fu). The prepared cationic framework UiO-67-CDC-(CH3)2 showed moderately high surface area, hierarchical pore structures, and positive surface characteristics, which effectively and selectivity encapsulated the electron-rich 5-Fu molecules through electrostatic attraction, with a relatively high loading of up to 56.5% (wt%). The drug delivery in simulated blood environment (pH = 7.4) exhibited a more effective release, demonstrating a physiological pH-responsive sustained release. Significantly, the electron-deficient Zr-MOF itself, as a kind of high-sensitivity fluorescence detector, has a unique fluorescence "turn-on" effect with 5-Fu. These results pave the way towards designing surface-engineered MOF materials of interest in drug delivery and fluorescent sensing applications.

Metal-organic frameworks for advanced drug delivery

Metal-organic frameworks (MOFs), comprised of organic ligands and metal ions/metal clusters via coordinative bonds are highly porous, crystalline materials. Their tunable porosity, chemical composition, size and shape, and easy surface functionalization make this large family more and more popular for drug delivery. There is a growing interest over the last decades in the design of engineered MOFs with controlled sizes for a variety of biomedical applications. This article presents an overall review and perspectives of MOFs-based drug delivery systems (DDSs), starting with the MOFs classification adapted for DDSs based on the types of constituting metals and ligands. Then, the synthesis and characterization of MOFs for DDSs are developed, followed by the drug loading strategies, applications, biopharmaceutics and quality control. Importantly, a variety of representative applications of MOFs are detailed from a point of view of applications in pharmaceutics, diseases therapy and advanced DDSs. In particular, the biopharmaceutics and quality control of MOFs-based DDSs are summarized with critical issues to be addressed. Finally, challenges in MOFs development for DDSs are discussed, such as biostability, biosafety, biopharmaceutics and nomenclature.

Construction of Highly Proton-Conductive Zr(IV)-Based Metal-Organic Frameworks From Pyrrolo-pyrrole-Based Linkers with a Rhombic Shape

To date, numerous zirconium cluster-based metal-organic frameworks (Zr-MOFs) with attractive physical properties have been achieved thanks to tailorable organic linkers and versatile Zr clusters. Nevertheless, in comparison with the most-used high-symmetry organic linkers, low-symmetry linkers have rarely been exploited in the construction of Zr-MOFs. Despite challenges in predicting the structure and topology of the MOF, linker desymmetrization presents opportunities for the design of Zr-MOFs with unusual topologies and unexpected functionalities. Herein, we report for the first time the construction of two robust Zr-MOFs (IAM-7 and IAM-8) from two pyrrolo-pyrrole-based low-symmetry tetracarboxylate linkers with a rare rhombic shape. The low symmetry of the linkers arises from the asymmetric pyrrolo-pyrrole core and the varying branch lengths, which play a critical role in the structural diversity between IAM-7 and IAM-8 seen from the structural analysis and lead to hydrophilic channels that contain uncoordinated carboxylate groups in the structure of IAM-7. Furthermore, the proton conductivity of IAM-7 displays a high temperature and humidity dependence where the proton conductivity increases from 2.84 × 10^-8 S cm^-1 at 30 °C and 40% relative humidity (RH) to 1.42 × 10^-2 S cm^-1 at 90 °C and 95% RH, making it among one of the most conductive Zr-MOFs. This work not only enriches the library of Zr-MOFs but also offers a platform for the design of low-symmetry linkers toward the structural diversity or irregularity of MOFs as well as their structure-related properties.

Zinc(ii) and cadmium(ii) amorphous metal-organic frameworks (aMOFs): study of activation process and high-pressure adsorption of greenhouse gases

Two novel amorphous metal-organic frameworks (aMOFs) with chemical composition {[Zn₂(MTA)]·4H₂O·3DMF} _n (UPJS-13) and {[Cd₂(MTA)]·5H₂O·4DMF} _n (UPJS-14) built from Zn(ii) and Cd(ii) ions and extended tetrahedral tetraazo-tetracarboxylic acid (H₄MTA) as a linker were prepared and characterised. Nitrogen adsorption measurements were performed on as-synthesized (AS), ethanol exchanged (EX) and freeze-dried (FD) materials at different activation temperatures of 60, 80, 100, 120, 150 and 200 °C to obtain the best textural properties. The largest surface areas of 830 m² g^-1 for UPJS-13 (FD) and 1057 m² g^-1 for UPJS-14 (FD) were calculated from the nitrogen adsorption isotherms for freeze-dried materials activated at mild activation temperature (80 °C). Subsequently, the prepared compounds were tested as adsorbents of greenhouse gases, carbon dioxide and methane, measured at high pressures. The maximal adsorption capacities were 30.01 wt% CO₂ and 4.84 wt% CH₄ for UPJS-13 (FD) and 24.56 wt% CO₂ and 6.38 wt% CH₄ for UPJS-14 (FD) at 20 bar and 30 °C.

A novel sodium-fluorescent crystal

In this work, a novel sodium-fluorescent crystal (Na-FS) was synthesized from 4-dimethylaminobenzoic acid and sodium hydroxide by one-pot hydrothermal method. The structure and conformation of Na-FS were confirmed by single-crystal X-ray diffraction and scanning electron microscope, and the optical properties were studied by fluorescence spectrometer. The results showed that: Na-FS was a triclinic crystal, space group was P-1, cell parameters a, b and c were 10.5113(3), 15.9198(5) and 15.9560(5) Å, respectively, and the number of independent atoms Z in a structure cell was two. Additionally, Na-FS has a blue fluorescence emission (around 360 nm under excited at the range of 230-300 nm) with great photostability and photobleaching resistance, and the quantum yield of Na-FS is 30.58%.

Tetracycline removal from aqueous solution using zirconium-based metal-organic frameworks (Zr-MOFs) with different pore size and topology: Adsorption isotherm, kinetic and mechanism studies

The adsorptive removal of tetracycline (TC) was studied with three types of zirconium-based metal-organic frameworks (Zr-MOFs), UiO-66, NU-1000 and MOF-525. The adsorption kinetics best fitted with the pseudo-second-order kinetic model and the adsorption equilibrium was rapidly reached within 40 min on UiO-66 and NU-1000, and 120 min on MOF-525. The adsorption isotherms best fitted with Sips model, and the maximum Sips adsorption capacities of TC on UiO-66, NU-1000 and MOF-525 were 145 mg·g^-1, 356 mg·g^-1 and 807 mg·g^-1 respectively, which were much higher than common adsorbents. The X-ray photoelectron spectra measurements and the influence of pH suggested that the π-π interaction played a crucial role during the adsorption. Pore characteristics and topology of MOFs showed great effect on adsorption performance. The cages whose size match well with TC helped MOF-525 to get highest adsorption amount per surface area among MOFs we studied. The proper topology of NU-1000 contributed to its high adsorption rate. River water was also used to confirm the excellent adsorptive performance of these three Zr-MOFs in practical application. These results might aid us to comprehend the adsorption of TC on Zr-MOFs and expand the application of Zr-MOFs in water treatment for removal of emerging contaminants.

Construction of an Asymmetric Porphyrinic Zirconium Metal-Organic Framework through Ionic Postchiral Modification

Herein, one kind of neutral chiral zirconium metal-organic framework (Zr-MOF) was reported from the porphyrinic MOF (PMOF) family with a metallolinker (Mn^III-porphyrin) as the achiral polytopic linker [free base tetrakis(4-carboxyphenyl)porphyrin] and chiral anions. Achiral Zr-MOF was chiralized through the exchange of primitive anions with new chiral organic anions (postsynthetic exchange). This chiral functional porphyrinic MOF (CPMOF) was characterized by several techniques such as powder X-ray diffraction, Fourier transform infrared spectroscopy, ultraviolet-visible spectroscopy, ¹H NMR, energy-dispersive X-ray spectroscopy, scanning electron microscopy, and Brunauer-Emmett-Teller measurements. In the resulting structure, there are two active metal sites as Lewis acid centers (Zr and Mn) and chiral species as Brønsted acid sites along with their cooperation as nucleophiles. This CPMOF shows considerable bimodal porosity with high surface area and stability. Additionally, its ability was investigated in asymmetric catalyses of prochiral substrates. Interactions between framework chiral species and prochiral substrates have large impacts on the catalytic ability and chirality induction. This chiral catalyst proceeded asymmetric epoxidation and CO₂ fixation reactions at lower pressure with high enantioselectivity due to Lewis acids and chiral auxiliary nucleophiles without significant loss of activity up to the sixth step of consecutive cycles of reusability. Observations revealed that chiralization of Zr-MOF could happen by a succinct strategy that can be a convenient method to design chiral MOFs.

Crystal engineering of coordination polymers using flexible tetracarboxylate linkers with embedded cyclohexyldiamine cores

Flexible amine-functionalised tetracarboxylate ligands with different length arms generate a large variety of coordination polymers which notably lack topological consistency.

Highly Stable Zr(IV)-Based Metal-Organic Frameworks for Chiral Separation in Reversed-Phase Liquid Chromatography

Separation of racemic mixtures is of great importance and interest in chemistry and pharmacology. Porous materials including metal-organic frameworks (MOFs) have been widely explored as chiral stationary phases (CSPs) in chiral resolution. However, it remains a challenge to develop new CSPs for reversed-phase high-performance liquid chromatography (RP-HPLC), which is the most popular chromatographic mode and accounts for over 90% of all separations. Here we demonstrated for the first time that highly stable Zr-based MOFs can be efficient CSPs for RP-HPLC. By elaborately designing and synthesizing three tetracarboxylate ligands of enantiopure 1,1'-biphenyl-20-crown-6, we prepared three chiral porous Zr(IV)-MOFs with the framework formula [Zr₆O₄(OH)₈(H₂O)₄(L)₂]. They share the same flu topological structure but channels of different sizes and display excellent tolerance to water, acid, and base. Chiral crown ether moieties are periodically aligned within the framework channels, allowing for stereoselective recognition of guest molecules via supramolecular interactions. Under acidic aqueous eluent conditions, the Zr-MOF-packed HPLC columns provide high resolution, selectivity, and durability for the separation of a variety of model racemates, including unprotected and protected amino acids and N-containing drugs, which are comparable to or even superior to several commercial chiral columns for HPLC separation. DFT calculations suggest that the Zr-MOF provides a confined microenvironment for chiral crown ethers that dictates the separation selectivity.

Structural Diversity of Zirconium Metal-Organic Frameworks and Effect on Adsorption of Toxic Chemicals

While linkers with various conformations pose challenges in the design and prediction of metal-organic framework (MOF) structures, they ultimately provide great opportunities for the discovery of novel structures thereby enriching structural diversity. Tetratopic carboxylate linkers, for example, have been widely used in the formation of Zr-based MOFs due to the ability to target diverse topologies, providing a promising platform to explore their mechanisms of formation. However, it remains a challenge to control the resulting structures when considering the complex assembly of linkers with unpredicted conformations and diverse Zr₆ node connectivities. Herein, we systematically explore how solvents and modulators employed during synthesis influence the resulting topologies of Zr-MOFs, choosing H₄TCPB-Br₂ (1,4-dibromo-2,3,5,6-tetrakis(4-carboxyphenyl)benzene) as a representative tetratopic carboxylate linker. By modulating the reaction conditions, the conformations of the linker and the connectivities of the Zr₆ node can be simultaneously tuned, resulting in four types of structures: a new topology (NU-500), she (NU-600), scu (NU-906), and csq (NU-1008). Importantly, we have synthesized the first 5-connected Zr₆ node to date with the (4,4,4,5)-connected framework, NU-500. We subsequently performed detailed structural analyses to uncover the relationship between the structures and topologies of these MOFs and demonstrated the crucial role that the flexible linker played to access varied structures by different degrees of linker deformation. Due to a variety of pore structures ranging from micropores to hierarchical micropores and mesopores, the resulting MOFs show drastically different behaviors for the adsorption of n-hexane and dynamic adsorption of 2-chloroethyl ethyl sulfide (CEES) under dry and humid conditions.

Prodrug-Loaded Zirconium Carbide Nanosheets as a Novel Biophotonic Nanoplatform for Effective Treatment of Cancer

Conventional chemotherapy and photothermal therapy (PTT) face many major challenges, including systemic toxicity, low bioavailability, ineffective tissue penetration, chemotherapy/hyperthermia-induced inflammation, and tumor angiogenesis. A versatile nanomedicine offers an exciting opportunity to circumvent the abovementioned limitations for their successful translation into clinical practice. Here, a promising biophotonic nanoplatform is developed based on the zirconium carbide (ZrC) nanosheet as a deep PTT-photosensitizer and on-demand designed anticancer prodrug SN38-Nif, which is released and activated by photothermia and tumor-overexpressed esterase. In vitro and in vivo experimental evidence shows the potent anticancer effects of the integrated ZrC@prodrug biophotonic nanoplatform by specifically targeting malignant cells, chemotherapy/hyperthermia-induced tumor inflammation, and angiogenesis. In mouse models, the ZrC@prodrug system markedly inhibits tumor recurrence, metastasis, inflammation and angiogenesis. The findings unravel a promising biophotonic strategy for precision treatment of cancer.

Synthesis of Magnetic Metal-Organic Frame Material and Its Application in Food Sample Preparation

A variety of contaminants in food is an important aspect affecting food safety. Due to the presence of its trace amounts and the complexity of food matrix, it is very difficult to effectively separate and accurately detect them. The magnetic metal-organic framework (MMOF) composites with different structures and functions provide a new choice for the purification of food matrix and enrichment of trace targets, thus providing a new direction for the development of new technologies in food safety detection with high sensitivity and efficiency. The MOF materials composed of inorganic subunits and organic ligands have the advantages of regular pore structure, large specific surface area and good stability, which have been thoroughly studied in the pretreatment of complex food samples. MMOF materials combined different MOF materials with various magnetic nanoparticles, adding magnetic characteristics to the advantages of MOF materials, which are in terms of material selectivity, biocompatibility, easy operation and repeatability. Combined with solid phase extraction (SPE) technique, MMOF materials have been widely used in the food pretreatment. This article introduced the new preparation strategies of different MMOF materials, systematically summarizes their applications as SPE adsorbents in the pretreatment of food contaminants and analyzes and prospects their future application prospects and development directions.

Remarkable Structural Diversity between Zr/Hf and Rare-Earth MOFs via Ligand Functionalization and the Discovery of Unique (4, 8)-c and (4, 12)-connected Frameworks

Ligand modification in MOFs provides great opportunities not only for the development of functional materials with new or enhanced properties but also for the discovery of novel structures. We report here that a sulfone-functionalized tetrahedral carboxylate-based ligand is capable of directing the formation of new and fascinating MOFs when combined with Zr⁴⁺/Hf⁴⁺ and rare-earth metal cations (RE) with improved gas-sorption properties. In particular, the resulting M-flu-SO₂ (M: Zr, Hf) materials display a new type of the augmented flu-a net, which is different as compared to the flu-a framework formed by the nonfunctionalized tetrahedral ligand. In terms of properties, a remarkable increase in the CO₂ uptake is observed that reaches 76.6% and 61.6% at 273 and 298 K and 1 bar, respectively. When combined with REs, the sulfone-modified linker affords novel MOFs, RE-hpt-MOF-1 (RE: Y³⁺, Ho³⁺, Er³⁺), which displays a fascinating (4, 12)-coordinated hpt net, based on nonanuclear [RE₉(μ₃-Ο)₂(μ₃-ΟΗ)₁₂(-COO)₁₂] clusters that serve as hexagonal prismatic building blocks. In the absence of the sulfone groups, we discovered that the tetrahedral linker directs the formation of new RE-MOFs, RE-ken-MOF-1 (RE: Y³⁺, Ho³⁺, Er³⁺, Yb³⁺), that display an unprecedented (4, 8)-coordinated ken net based on nonanuclear RE₉-clusters, to serve as bicapped trigonal prismatic building units. Successful activation of the representative member Y-ken-MOF-1 reveals a high BET surface area and total pore volume reaching 2621 m² g^-1 and 0.95 cm³ g^-1, respectively. These values are the highest among all RE MOFs based on nonanuclear clusters and some of the highest in the entire RE family of MOFs. The present work uncovers a unique structural diversity existing between Zr/Hf and RE-based MOFs that demonstrates the crucial role of linker design. In addition, the discovery of the new RE-hpt-MOF-1 and RE-ken-MOF-1 families of MOFs highlights the great opportunities existing in RE-MOFs in terms of structural diversity that could lead to novel materials with new properties.

A series of four novel alkaline earth metal-organic frameworks constructed of Ca(ii), Sr(ii), Ba(ii) ions and tetrahedral MTB linker: structural diversity, stability study and low/high-pressure gas adsorption properties

A series of four novel microporous alkaline earth metal–organic frameworks (AE-MOFs) containing methanetetrabenzoate linker (MTB) with composition {[Ca₄(μ₈-MTB)₂]·2DMF·4H₂O}_n (UPJS-6), {[Ca₄(μ₄-O)(μ₈-MTB)_3/2(H₂O)₄]·4DMF·4H₂O}_n (UPJS-7), {[Sr₃(μ₇-MTB)_3/2]·4DMF·7H₂O}_n (UPJS-8) and {[Ba₃(μ₇-MTB)_3/2(H₂O)₆]·2DMF·4H₂O}_n (UPJS-9) (UPJS = University of Pavol Jozef Safarik) have been successfully prepared and characterized. The framework stability and thermal robustness of prepared materials were investigated using thermogravimetric analysis (TGA) and high-energy powder X-ray diffraction (HE-PXRD). MOFs were tested as adsorbents for different gases at various pressures and temperatures. Nitrogen and argon adsorption showed that the activated samples have moderate BET surface areas: 103 m² g⁻¹ (N₂)/126 m² g⁻¹ (Ar) for UPJS-7′′, 320 m² g⁻¹ (N₂)/358 m² g⁻¹ (Ar) for UPJS-9′′ and UPJS-8′′ adsorbs only a limited amount of N₂ and Ar. It should be noted that all prepared compounds adsorb carbon dioxide with storage capacities ranging from 3.9 to 2.4 wt% at 20 °C and 1 atm, and 16.4–13.5 wt% at 30 °C and 20 bar. Methane adsorption isotherms show no adsorption at low pressures and with increasing pressure the storage capacity increases to 4.0–2.9 wt% of CH₄ at 30 °C and 20 bar. Compounds displayed the highest hydrogen uptake of 3.7–1.8 wt% at −196 °C and 800 Torr among MTB containing MOFs.

Four novel microporous alkaline earth metal–organic frameworks (AE-MOFs) containing methanetetrabenzoate linker (MTB): UPJS-6, UPJS-7, UPJS-8 and UPJS-9 have been successfully prepared, characterized and tested as adsorbents for different gases.

Molecular Vises for Precisely Positioning Ligands near Catalytic Metal Centers in Metal-Organic Frameworks

We report the construction of a molecular vise by pairing a tritopic phenylphosphorus(III) linker and a monotopic linker in opposite positions within a metal-organic framework. The angle between these linkers at metal sites is fixed upon changing the functionality in the monotopic linker, while the distance between them is precisely tuned. This distance within the molecular vise is accurately measured by ¹H-³¹P solid-state nuclear magnetic resonance spectroscopy. This unveils the impact of the distance on catalytic performance without interference from electrostatic effects or changes in the angle of the ligand, which is unprecedented in classic organometallic complexes.