UV-Induced Tetrazole-Thiol Reaction for Polymer Conjugation and Surface Functionalization

Bioorthogonally activated probes for precise fluorescence imaging

Over the past two decades, bioorthogonal chemistry has undergone a remarkable development, challenging traditional assumptions in biology and medicine. Recent advancements in the design of probes tailored for bioorthogonal applications have met the increasing demand for precise imaging, facilitating the exploration of complex biological systems. These state-of-the-art probes enable highly sensitive, low background, in situ imaging of biological species and events within live organisms, achieving resolutions comparable to the size of the biomolecule under investigation. This review provides a comprehensive examination of various categories of bioorthogonally activated in situ fluorescent labels. It highlights the intricate design and benefits of bioorthogonal chemistry for precise in situ imaging, while also discussing future prospects in this rapidly evolving field.

Fluorescent Nanoassembly of Tetrazole-Based Dyes with Amphoteric Surfactants: Investigation of Cyanide Sensing and Antitubercular Activity

Tetrazole-based easily synthesizable fluorogenic probes have been developed that can form self-assembled nanostructures in the aqueous medium. Though the compounds could achieve detection of cyanide ions in apolar solvents, such as, THF, significant interference was observed from other basic anions, such as F-, AcO-, H2PO4-, etc. On the other hand, a highly specific response was observed for CN- ions in the aqueous medium. However, the sensitivity was so poor that it could hardly be useful for real-life sample analysis. Interestingly, the co-assembly of such probe molecules with hydroxyethyl-anchored amphoteric surfactants could drastically improve the sensitivity toward CN- ions in water without dampening their excellent selectivity. Also, it was observed that the degree of fluorescence response for CN- ions depends on the nature of the polyaromatic scaffolds (naphthyl vs anthracenyl), the nature of the surfactant assembly (micelle vs vesicle), etc. The mechanistic investigation indicates the hydrogen bonding interaction between the tetrazole -NH group and cyanide ions in the aqueous medium, which can effectively change the electronics of the tetrazole unit, resulting in alteration in the extent of charge transfer interaction. Then, the biocompatible composite materials (dye-surfactant assemblies at different ratios) were tested for antituberculosis activity. Fortunately, in a few cases, the compositions were found to be as effective as the commercially available antituberculosis drug, ethambutol.

Photoresponsive Emulsion-Templated Porous Materials via Orthogonal Photoclick Chemistry

The functionalization of emulsion-templated porous polymers (polyHIPEs) utilizing modern and efficient chemistries is an important avenue for tailoring the properties of these scaffolds for specific and specialized applications. Herein, tetrazole photoclick chemistry is utilized for the efficient functionalization of polyHIPEs synthesized from various monomer systems and polymerization chemistries. Using both radical polymerization and thiol-ene polymerization, polyHIPEs with well-defined, interconnected open-cell morphologies are synthesized with tetrazole concentrations ranging from 0 to 5 w/v %, with the pore diameters ranging from 3 to 24 μm. Analyzed by fluorescence spectroscopy, FTIR spectroscopy, and confocal microscopy, spatially controlled functionalization to generate photopatterned fluorescent polyHIPEs is demonstrated via the reaction with residual acrylate and thiol groups. In addition, the scaffolds can be readily functionalized with external dipolarophiles such as acrylates to incorporate a functionality onto the polyHIPE surface. With many functional tetrazoles also reported in the literature, a PEG-tetrazole is also used to explore the photoinduced functionalization of polyHIPEs possessing tunable ratios of thiol and acrylate groups, and the effect on fluorescence, wettability, and biocompatibility is analyzed. Overall, the reaction is shown to be a broadly applicable tool for polyHIPE functionalization with many avenues for further development toward specific applications.

Surface Modification, Topographic Design and Applications of Superhydrophobic Systems

Superhydrophobic surfaces with expanded wetting behaviors, like tunable adhesion, hybrid surface hydrophobicity and smart hydrophobic switching have attracted increasing attention due to their broad applications. Herein, the construction methods, mechanisms and advanced applications of special superhydrophobicity are reviewed, and hydro/superhydrophobic modifications are categorized and discussed based on their surface chemistry, and topographic design. The formation and maintenance of special superhydrophobicity in the metastable state are also examined and explored. In addition, particular attention is paid to the use of special wettability in various applications, such as membrane distillation, droplet-based electricity generators and anti-fogging surfaces. Finally, the challenges for practical applications and future research directions are discussed.

A Reactive Superhydrophobic Platform for Living Photolithography

Superhydrophobic surfaces with regional functions have widespread applications in biotechnology, diagnostic applications, and micro-chemical synthesis and analysis. However, owing to their chemical inertness, superhydrophobic surfaces with chemical reactivity are difficult to achieve. Superhydrophobic surfaces that can be further modified with varied densities and expanded species of the functional moieties are not readily available. In this study, a single-step approach to achieve a reactive superhydrophobic surface is reported, on which chemical grafting of a library of molecules can be carried out through surface-initiated atom-transfer radical addition or surface-initiated atom-transfer radical polymerization. The excellent spatial and temporal controllability of these chemical processes under visible light enables us to take advantage of programmed liquid-crystal-display (LCD) or Digital Light Processing (DLP) photolithography systems to effortlessly regulate the location, density, and species of the functional molecules on the reactive superhydrophobic surface. The distinctive properties of this surface will provide new insight into intelligent superhydrophobic material development and practical applications, such as aqueous/oil microdroplets array, multi-anti-counterfeiting labels and integrated microfluidic reactors with enzymes for chemical logic learning.

Role of chemistry in bio-inspired liquid wettability

Chemistry and topography are the two distinct available tools for customizing different bio-inspired liquid wettability including superhydrophobicity, superamphiphobicity, underwater superoleophobicity, underwater superoleophilicity, and liquid infused slippery property. In nature, various living species possessing super and special liquid wettability inherently comprises of distinctly patterned surface topography decorated with low/high surface energy. Inspired from the topographically diverse natural species, the variation in surface topography has been the dominant approach for constructing bio-inspired antiwetting interfaces. However, recently, the modulation of chemistry has emerged as a facile route for the controlled tailoring of a wide range of bio-inspired liquid wettability. This review article aims to summarize the various reports published over the years that has elaborated the distinctive importance of both chemistry and topography in imparting and modulating various bio-inspired wettability. Moreover, this article outlines some obvious advantages of chemical modulation approach over topographical variation. For example, the strategic use of the chemical approach has allowed the facile, simultaneous, and independent tailoring of both liquid wettability and other relevant physical properties. We have also discussed the design of different antiwetting patterned and stimuli-responsive interfaces following the strategic and precise alteration of chemistry for various prospective applications.

Charting the Chemical and Mechanistic Scope of Light-Triggered Protein Ligation

The creation of discrete, covalent bonds between a protein and a functional molecule like a drug, fluorophore, or radiolabeled complex is essential for making state-of-the-art tools that find applications in basic science and clinical medicine. Photochemistry offers a unique set of reactive groups that hold potential for the synthesis of protein conjugates. Previous studies have demonstrated that photoactivatable desferrioxamine B (DFO) derivatives featuring a para-substituted aryl azide (ArN₃) can be used to produce viable zirconium-89-radiolabeled monoclonal antibodies (⁸⁹Zr-mAbs) for applications in noninvasive diagnostic positron emission tomography (PET) imaging of cancers. Here, we report on the synthesis, ⁸⁹Zr-radiochemistry, and light-triggered photoradiosynthesis of ⁸⁹Zr-labeled human serum albumin (HSA) using a series of 14 different photoactivatable DFO derivatives. The photoactive groups explore a range of substituted, and isomeric ArN₃ reagents, as well as derivatives of benzophenone, a para-substituted trifluoromethyl phenyl diazirine, and a tetrazole species. For the compounds studied, efficient photochemical activation occurs inside the UVA-to-visible region of the electromagnetic spectrum (∼365-450 nm) and the photochemical reactions with HSA in water were complete within 15 min under ambient conditions. Under standardized experimental conditions, photoradiosynthesis with compounds 1-14 produced the corresponding ⁸⁹ZrDFO-PEG₃-HSA conjugates with decay-corrected isolated radiochemical yields between 18.1 ± 1.8% and 62.3 ± 3.6%. Extensive density functional theory (DFT) calculations were used to explore the reaction mechanisms and chemoselectivity of the light-induced bimolecular conjugation of compounds 1-14 to protein. The photoactivatable DFO-derivatives operate by at least five distinct mechanisms, each producing a different type of bioconjugate bond. Overall, the experimental and computational work presented here confirms that photochemistry is a viable option for making diverse, functionalized protein conjugates.

Lights on 2,5-diaryl tetrazoles: applications and limits of a versatile photoclick reaction

Recently, photoclick chemistry emerged as a powerful tool employed in several research fields, from medicinal chemistry and biology to material sciences. The growing interest in this type of chemical process is justified by the possibility to produce complex molecular systems using mild reaction conditions. However, the elevated spatio-temporal control offered by photoclick chemistry is highly intriguing, as it expands the range of applications. In this context, the light-triggered reaction of 2,5-diaryl tetrazoles with dipolarophiles emerged for its interesting features: excellent stability of the substrates, fast reaction kinetic, and the formation of a highly fluorescent product, fundamental for sensing applications. In the last years, 2,5-diaryl tetrazoles have been extensively employed, especially for bioorthogonal ligations, to label biomolecules and nucleic acids. In this review, we summarized recent applications of this interesting photoclick reaction, with a particular focus on biological fields. Moreover, we described the main limits that affect this system and current strategies proposed to overcome these issues. The general discussion here presented could prompt further optimization of the process and pave the way for the development of new original structures and innovative applications.

Graphical abstract

Enhanced catalysis through structurally modified hybrid 2-D boron nitride nanosheets comprising of complexed 2-hydroxy-4-methoxybenzophenone motif

Tuning the structural architecture of the pristine two dimensional hexagonal boron nitride (h-BN) nanosheets through rational surface engineering have proven advantageous in the fabrication of competent catalytic materials. Inspired by the performance of h-BN based nanomaterials in expediting key organic transformations, we channelized our research efforts towards engineering the inherent surface properties of the exclusively stacked h-BN nanosheets through the incorporation of a novel competent copper complex of a bidentate chelating ligand 2-hydroxy-4-methoxybenzophenone (BP). Delightfully, this hybrid nanomaterial worked exceptionally well in boosting the [3 + 2] cycloaddition reaction of azide and nitriles, providing a facile access to a diverse variety of highly bioactive tetrazole motifs. A deep insight into the morphology of the covalently crafted h-BN signified the structural integrity of the exfoliated h-BN@OH nanosheets that exhibited lamellar like structures possessing smooth edges and flat surface. This interesting morphology could also be envisioned to augment the catalysis by allowing the desired surface area for the reactants and thus tailoring their activity. The work paves the way towards rational design of h-BN based nanomaterials and adjusting their catalytic potential by the use of suitable complexes for promoting sustainable catalysis, especially in view of the fact that till date only a very few h-BN nanosheets based catalysts have been devised.

A low-cost self-dispersing method of droplet array generation enabled by a simple reusable mask for bioanalysis and bioassays

Discontinuous dewetting is an attractive technique that can produce droplet array of specific volume, geometry and at predefined location on a substrate. Droplet array has great potential in bioanalysis such as high-throughput live cell screening, digital PCR, and drug candidates. Here, we propose a self-dispersing droplet array generation method, which has advantages of low cost, simple operation, and easy large-area production ability. Droplet array of specific volumes was generated on a polymethyl methacrylate (PMMA) substrate using a simple reusable polyimide (PI) adhesive mask. Experiment shows that the generated droplet array can be used to successfully capture single particles which obeys Poisson distribution in a high-throughput manner. Furthermore, a droplet-array sandwiching chip was created based on the self-dispersion method for rapid detection of human serum albumin (HSA) at wide range of 183-11,712 μg/mL with low reagent consumption of 2.2 μL, demonstrating its potential applications in convenient high-throughput bioanalysis and bioassays.

Passerini Multicomponent Reactions Enabling Self-Reporting Photosensitive Tetrazole Polymers

We introduce the synthesis of photosensitive tetrazole monomers via Passerini multicomponent reactions (MCRs). We exploit the MCR's tolerance toward various functional groups under mild, catalyst-free conditions in a one-pot reaction setup to generate tetrazole-containing monomers featuring a methacrylic moiety, which enables their subsequent reversible addition-fragmentation chain transfer (RAFT) polymerization. By employing tetrazoles with either a 4-methoxy phenyl or a pyrene substituent, further modifications of the polymers in a wavelength-orthogonal, self-reporting fashion upon irradiation with either UV or visible light become possible.

Photoclick Chemistry: A Bright Idea

At its basic conceptualization, photoclick chemistry embodies a collection of click reactions that are performed via the application of light. The emergence of this concept has had diverse impact over a broad range of chemical and biological research due to the spatiotemporal control, high selectivity, and excellent product yields afforded by the combination of light and click chemistry. While the reactions designated as "photoclick" have many important features in common, each has its own particular combination of advantages and shortcomings. A more extensive realization of the potential of this chemistry requires a broader understanding of the physical and chemical characteristics of the specific reactions. This review discusses the features of the most frequently employed photoclick reactions reported in the literature: photomediated azide-alkyne cycloadditions, other 1,3-dipolarcycloadditions, Diels-Alder and inverse electron demand Diels-Alder additions, radical alternating addition chain transfer additions, and nucleophilic additions. Applications of these reactions in a variety of chemical syntheses, materials chemistry, and biological contexts are surveyed, with particular attention paid to the respective strengths and limitations of each reaction and how that reaction benefits from its combination with light. Finally, challenges to broader employment of these reactions are discussed, along with strategies and opportunities to mitigate such obstacles.

Light-Triggered Click Chemistry

The merging of click chemistry with discrete photochemical processes has led to the creation of a new class of click reactions, collectively known as photoclick chemistry. These light-triggered click reactions allow the synthesis of diverse organic structures in a rapid and precise manner under mild conditions. Because light offers unparalleled spatiotemporal control over the generation of the reactive intermediates, photoclick chemistry has become an indispensable tool for a wide range of spatially addressable applications including surface functionalization, polymer conjugation and cross-linking, and biomolecular labeling in the native cellular environment. Over the past decade, a growing number of photoclick reactions have been developed, especially those based on the 1,3-dipolar cycloadditions and Diels-Alder reactions owing to their excellent reaction kinetics, selectivity, and biocompatibility. This review summarizes the recent advances in the development of photoclick reactions and their applications in chemical biology and materials science. A particular emphasis is placed on the historical contexts and mechanistic insights into each of the selected reactions. The in-depth discussion presented here should stimulate further development of the field, including the design of new photoactivation modalities, the continuous expansion of λ-orthogonal tandem photoclick chemistry, and the innovative use of these unique tools in bioconjugation and nanomaterial synthesis.

Laser Photodissociation Action Spectroscopy for the Wavelength-Dependent Evaluation of Photoligation Reactions

The nitrile imine-mediated tetrazole-ene cycloaddition is a widely used class of photoligation. Optimizing the reaction outcome requires detailed knowledge of the tetrazole photoactivation profile, which can only partially be ascertained from absorption spectroscopy, or otherwise involves laborious reaction monitoring in solution. Photodissociation action spectroscopy (PDAS) combines the advantages of optical spectroscopy and mass spectrometry in that only absorption events resulting in a mass change are recorded, thus revealing the desired wavelength dependence of product formation. Moreover, the sensitivity and selectivity afforded by the mass spectrometer enable reliable assessment of the photodissociation profile even on small amounts of crude material, thus accelerating the design and synthesis of next-generation substrates. Using this workflow, we demonstrate that the photodissociation onset for nitrile imine formation is red-shifted by ca. 50 nm with a novel N-ethylcarbazole derivative relative to a phenyl-substituted archetype. Benchmarked against solution-phase tunable laser experiments and supported by quantum chemical calculations, these discoveries demonstrate that PDAS is a powerful tool for rapidly screening the efficacy of new substrates in the quest toward efficient visible light-triggered ligation for biological applications.

Facile Approach to Conductive Polymer Microelectrodes for Flexible Electronics

Conductive polymers have been intensively investigated as materials for electrodes in flexible electronics due to their favorable biocompatibility and reliable electrochemical stability. Nevertheless, patterning of conductive polymers for the fabrication of devices and in various electronics applications confronts multifarious limitations and challenges. Here, we present a simple but efficient strategy to obtain conductive polymer microelectrodes via utilization of surface-tension-confined liquid patterns. This method shows universality for various oxidizers and conductive polymers, high resolution, stability, and favorable compatibility with different surfaces and materials. The developed method has been demonstrated for creating conductive polymer microelectrodes with a customized reaction process, defined geometry, and flexible substrates. The obtained microelectrodes were assembled into flexible capacitive sensors. Thus, the method realizes a facile approach to conductive polymer microelectrodes for flexible electronics, biomedical applications, human activity monitors, and electronic skin.

Tuning Tetrazole Photochemistry for Protein Ligation and Molecular Imaging

Photochemistry provides a wide range of alternative reagents that hold potential for use in bimolecular functionalisation of proteins. Here, we report the synthesis and characterisation of metal ion binding chelates derivatised with disubstituted tetrazoles for the photoradiochemical labelling of monoclonal antibodies (mAbs). The photophysical properties of tetrazoles featuring extended aromatic systems and auxochromic substituents to tune excitation toward longer wavelengths (365 and 395 nm) were studied. Two photoactivatable chelates based on desferrioxamine B (DFO) and the aza-macrocycle NODAGA were functionalised with a tetrazole and developed for protein labelling with ⁸⁹ Zr, ⁶⁴ Cu and ⁶⁸ Ga radionuclides. DFO-tetrazole (1) was assessed by direct conjugation to formulated trastuzumab and subsequent radiolabelling with ⁸⁹ Zr. Radiochemical studies and cellular-based binding assays demonstrated that the radiotracer remained stable in vitro retained high immunoreactivity. Positron emission tomography (PET) imaging and biodistribution studies were used to measure the tumour specific uptake and pharmacokinetic profile in mice bearing SK-OV-3 xenografts. Experiments demonstrate that tetrazole-based photochemistry is a viable approach for the light-induced synthesis of PET radiotracers.

Photocaged Cell-Permeable Ubiquitin Probe for Temporal Profiling of Deubiquitinating Enzymes

Photocaged cell-permeable ubiquitin probe holds promise in profiling the activity of cellular deubiquitinating enzymes (DUBs) with the much needed temporal control. Here we report a new photocaged cell-permeable ubiquitin probe that undergoes photoactivation upon 365 nm UV treatment and enables intracellular deubiquitinating enzyme profiling. We used a semisynthetic approach to generate modular ubiquitin-based probe containing a tetrazole-derived warhead at the C-terminus of ubiquitin and employed a cyclic polyarginine cell-penetrating peptide (cR₁₀) conjugated to the N-terminus of ubiquitin via a disulfide linkage to deliver the probe into live cells. Upon 365 nm UV irradiation, the tetrazole group is converted to a nitrilimine intermediate in situ, which reacts with nearby nucleophilic cysteine residue from the DUB active site. The new photocaged cell-permeable probe showed good reactivity toward purified DUBs, including USP2, UCHL1, and UCHL3, upon photoirradiation. The Ub-tetrazole probe was also assessed in HeLa cell lysate and showed robust labeling only upon photoactivation. We further carried out protein profiling in intact HeLa cells using the new photocaged cell-permeable ubiquitin probe and identified DUBs captured by the probe using label-free quantitative (LFQ) mass spectrometry. Importantly, the photocaged cell-permeable ubiquitin probe captured DUBs specifically in respective G1/S and G2/M phases in synchronized HeLa cells. Moreover, using this probe DUBs were profiled at different time points following the release of HeLa cells from G1/S phase. Our results showed that photocaged cell-permeable probe represents a valuable new tool for achieving a better understanding of the cellular functions of DUBs.

A Comprehensive Review of the Covalent Immobilization of Biomolecules onto Electrospun Nanofibers

Biomolecule immobilization has attracted the attention of various fields such as fine chemistry and biomedicine for their use in several applications such as wastewater, immunosensors, biofuels, et cetera. The performance of immobilized biomolecules depends on the substrate and the immobilization method utilized. Electrospun nanofibers act as an excellent substrate for immobilization due to their large surface area to volume ratio and interconnectivity. While biomolecules can be immobilized using adsorption and encapsulation, covalent immobilization offers a way to permanently fix the material to the fiber surface resulting in high efficiency, good specificity, and excellent stability. This review aims to highlight the various covalent immobilization techniques being utilized and their benefits and drawbacks. These methods typically fall into two categories: (1) direct immobilization and (2) use of crosslinkers. Direct immobilization techniques are usually simple and utilize the strong electrophilic functional groups on the nanofiber. While crosslinkers are used as an intermediary between the nanofiber substrate and the biomolecule, with some crosslinkers being present in the final product and others simply facilitating the reactions. We aim to provide an explanation of each immobilization technique, biomolecules commonly paired with said technique and the benefit of immobilization over the free biomolecule.

Enzyme- or light-triggered cyclopropenes for bioorthogonal ligation

Since first reported at the beginning of the 21st century, bioorthogonal reactions have become powerful tools for investigating biological systems. Here, we review several classic and current bioorthogonal reactions, including the Staudinger-Bertozzi ligation, strain-promoted azide-alkyne cycloaddition (SPAAC), 1,3-dipolar cycloaddition, and tetrazine-alkene ligation. We discuss the capabilities and limitations of the subset of current bioorthogonal reactions that can be "turned on" by exposure to light or an enzyme. Finally, we focus on our recently developed turn-on cyclopropenes, which can be activated for reaction with tetrazines by exposure to light or enzymes, like nitroreductase, depending on the modular reaction caging group appended to the cyclopropene. We discuss the caged cyclopropene's molecular design and synthesis, and we discuss experiments to evaluate and verify reactivity both in vitro and in vivo.

Near-infrared light controlled fluorogenic labeling of glycoengineered sialic acids in vivo with upconverting photoclick nanoprobe

Sialic acid serves as an important determinant for profiling cell activities in diverse biological and pathological processes. The precise control of sialic acid labeling to visualize its biological pathways under endogenous conditions is significant but still challenging due to the lack of reliable methods. Herein, we developed an effective strategy to spatiotemporally label thesialic acids with a near-infrared (NIR) light activated upconverting nanoprobe (Tz-UCNP). With this photoclickable nanoprobe and a stable N-alkene-d-mannosamine (Ac4ManNIPFA), metabolically synthesized alkene sialic acids on the cell surface were labeled and imaged in real time through fluorogenic cycloaddition. More importantly, we achieved spatially selective visualization of sialic acids in specific tumor tissues of the mice under NIR light activation in a spatially controlled manner. This in situ controllable labeling strategy thus enables the metabolic labeling of specific sialic acids in complex biological systems.

Two colours of light drive PET–RAFT photoligation

By fusing the realms of photopolymerisation and photoligation, our contribution exploits two orthogonal wavelengths of visible light to readily synthesise and functionalise well defined polymers from a unique dual functionality RAFT agent.

Clickable cellulosic surfaces for peptide-based bioassays

The use of peptides in paper-based analytics is a highly appealing field, yet it suffers from severe limitations. This is mostly due to the loss of effective target recognition properties of this relatively small probes upon nonspecific adsorption onto cellulose substrates. Here we address this issue by introducing a simple polymer-based strategy to obtain clickable cellulose surfaces, that we exploited for the chemoselective bioconjugation of peptide bioprobes. Our method largely outperformed standard adsorption-based immobilization strategy in a challenging, real case immunoassay, namely the diagnostic discrimination of Zika + individuals from healthy controls. Of note, the clickable polymeric coating not only allows efficient peptides bioconjugation, but it provides favorable anti-fouling properties to the cellulosic support. We envisage our strategy to broaden the repertoire of cellulosic materials manipulation and promote a renewed interest in peptide-based paper bioassays.

Fluorogenic "Photoclick" Labeling and Imaging of DNA with Coumarin-Fused Tetrazole in Vivo

Photoclickable fluorogenic probes will enable visualization of specific biomolecules with precise spatiotemporal control in their native environment. However, the fluorogenic tagging of DNA with current photocontrolled clickable probes is still challenging. Herein, we demonstrated the fast (19.5 ± 2.5 M^-1 s^-1) fluorogenic labeling and imaging of DNA in vitro and in vivo with rationally designed coumarin-fused tetrazoles under UV LED photoirradiation. With a water-soluble, nuclear-specific coumarin-fused tetrazole (CTz-SO₃), the metabolically synthesized DNA in cultured cells was effectively labeled and visualized, without fixation, via "photoclick" reaction. Moreover, the photoclickable CTz-SO₃ enabled real-time, spatially controlled imaging of DNA in live zebrafish.

Spatially-Resolved Multiple Metallopolymer Surfaces by Photolithography

A tetrazole-based photoligation protocol for the spatially-resolved encoding of various defined metallopolymers onto solid surfaces is introduced. By using this approach, fabrication of bi- and trifunctional metallopolymer surfaces with different metal combinations were achieved. Specifically, α-ω-functional copolymers containing bipyridine as well as triphenylphosphine ligands were synthesized through reversible addition-fragmentation chain transfer (RAFT) polymerization, and subsequently metal loaded to afford metallopolymers of the widely-used metals gold, palladium, and platinum. Spatially-resolved surface attachment was achieved by means of a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC) based photoligation protocol, exploiting tethered tetrazoles and metallopolymers equipped with a maleimide chain terminus. Metallopolymer coated surfaces with three different metals were prepared and characterized by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and spatially-resolved X-ray photoelectron spectroscopy (XPS) mapping, supporting the preserved chemical composition of the surface-bound metallopolymers. The established photochemical technology platform for arbitrary spatially-resolved metallopolymer surface designs enables the patterning of multiple metallopolymers onto solid substrates. This allows for the assembly of designer metallopolymer substrates.

Finely Tunable Surface Wettability by Two-Dimensional Molecular Manipulation

Local molecular environment governs material interface properties, especially the substrate's exposing behavior and overall functionality expression. Although current techniques can provide efficient surface property modification, challenges in molecule spatial distribution and composition controls limited the generation of homogeneous and finely tunable molecular environment. In this study, Au-thiolate rupturing operation in chemical lift-off lithography (CLL) is used to manipulate the substrate interface molecular environment. The creation of randomly distributed artificial self-assembled monolayer defects generates vacancies for substrate property modification through back-insertion of molecules with opposite functionalities. Surface wettability adjustment is utilized as an example, where well-controllable molecule distribution provides finely tunable substrate affinity toward liquids with different physical properties. The distinct property difference between two surface regions assists microdroplet formation when liquids flow through, not only water solution but also low-surface-tension organic liquids. These microdroplet arrays become a template to guide material assembly in its formation process and act as pH-sensitive platforms for high-throughput detection. Furthermore, the tunability of the molecular pattern in this approach helps minimize the coffee-ring effect and the sweet-spot issue in matrix-assisted laser desorption/ionization mass spectrometry. Two-dimensional molecular manipulation in the CLL operation, therefore, holds the capability toward controlling homogeneous material surface property and toward exhibiting behavior adjustments.

Achieving Controlled Biomolecule-Biomaterial Conjugation

The conjugation of biomolecules can impart materials with the bioactivity necessary to modulate specific cell behaviors. While the biological roles of particular polypeptide, oligonucleotide, and glycan structures have been extensively reviewed, along with the influence of attachment on material structure and function, the key role played by the conjugation strategy in determining activity is often overlooked. In this review, we focus on the chemistry of biomolecule conjugation and provide a comprehensive overview of the key strategies for achieving controlled biomaterial functionalization. No universal method exists to provide optimal attachment, and here we will discuss both the relative advantages and disadvantages of each technique. In doing so, we highlight the importance of carefully considering the impact and suitability of a particular technique during biomaterial design.

Sustainable Generation of Ni(OH)2 Nanoparticles for the Green Synthesis of 5-Substituted 1H-Tetrazoles: A Competent Turn on Fluorescence Sensing of H2O2

A mutually correlated green protocol has been devised that originates from a sustainable production of β-Ni(OH)₂ nanoparticles which is used for an efficient catalytic synthesis of versatile substituted tetrazoles, under mild reaction conditions in water via a simple, one-pot, eco-friendly method. The synthesis is followed by derivatization into a highly fluorescence active compound 9-(4-(5-(quinolin-2-yl)-1H-tetrazol-1-yl)phenyl)-9H-carbazole that can be used at tracer concentrations (0.1 μM) to detect as well as quantify hydrogen peroxide down to 2 μM concentration. The nanocatalyst was synthesized by a simple, proficient, and cost-effective methodology and characterized thoroughly by UV-vis absorption and Fourier transform infrared spectra, N₂ adsorption/desorption, high resolution transmission electron microscopy, powder X-ray diffraction pattern, field emission scanning electron microscopy, and thermogravimetric analysis. Broad substrate scope, easy handling, higher efficiency, low cost, and reusability of the catalyst are some of the important features of this heterogeneous catalytic system. The strong analytical performance of the resultant derivative in low-level quantification of potentially hazardous hydrogen peroxide is the key success of the overall green synthesis procedure reported here.

Droplet Microarrays: From Surface Patterning to High-Throughput Applications

High-throughput screening of live cells and chemical reactions in isolated droplets is an important and growing method in areas ranging from studies of gene functions and the search for new drug candidates, to performing combinatorial chemical reactions. Compared with microfluidics and well plates, the facile fabrication, high density, and open structure endow droplet microarrays on planar surfaces with great potential in the development of next-generation miniaturized platforms for high-throughput applications. Surfaces with special wettability have served as substrates to generate and/or address droplets microarrays. Here, the formation of droplet microarrays with designed geometry on chemically prepatterned surfaces is briefly described and some of the newer and emerging applications of these microarrays that are currently being explored are highlighted. Next, some of the available technologies used to add (bio-)chemical libraries to each droplet in parallel are introduced. Current challenges and future prospects that would benefit from using such droplet microarrays are also discussed.

Interface Engineering via Photopolymerization-Induced Phase Separation for Flexible UV-Responsive Phototransistors

Interface engineering has been recognized to be substantially critical for achieving efficient charge separation, charge carrier transport, and enhanced device performance in emerging optoelectronics. Nevertheless, precise control of the interface structure using current techniques remains a formidable challenge. Herein, we demonstrate a facile and versatile protocol wherein in situ thiol-ene click photopolymerization-induced phase separation is implemented for constructing heterojunction semiconductor interfaces. This approach generates continuous mountainlike heterojunction interfaces that favor efficient exciton dissociation at the interface while providing a continuous conductive area for hole transport above the interface. This facile low-temperature paradigm presents good adaptability to both rigid and flexible substrates, offering high-performance UV-responsive phototransistors with a normalized detectivity up to 6.3 × 10¹⁴ cm Hz^1/2 W^-1 (also called jones). Control experiments based on ex situ photopolymerization and in situ thermal polymerization are also implemented to demonstrate the superiority of this novel paradigm.

Surface Functionalization with Carboxylic Acids by Photochemical Microcontact Printing and Tetrazole Chemistry

In this paper, we show that carboxylic acid-functionalized molecules can be patterned by photochemical microcontact printing on tetrazole-terminated self-assembled monolayers. Upon irradiation, tetrazoles eliminate nitrogen to form highly reactive nitrile imines, which can be ligated with several different nucleophiles, carboxylic acids being the most reactive. As a proof of concept, we immobilized trifluoroacetic acid to monitor the reaction with X-ray photoelectron spectroscopy. Moreover, we also immobilized peptides and fabricated carbohydrate-lectin as well as biotin-streptavidin microarrays using this method. Surface-patterning was demonstrated by fluorescence microscopy and time-of-flight secondary ion mass spectrometry.

Fully degradable protein nanocarriers by orthogonal photoclick tetrazole-ene chemistry for the encapsulation and release

The encapsulation of sensitive drugs into nanocarriers retaining their bioactivity and achieving selective release is a challenging topic in current drug delivery design. Established protocols rely on metal-catalyzed or unspecific reactions to build the (mostly synthetic) vehicles which may inhibit the drug's function. Triggered by light, the mild tetrazole-ene cycloaddition enables us to prepare protein nanocarriers (PNCs) preserving at the same time the bioactivity of the sensitive antitumor and antiviral cargo Resiquimod (R848). This catalyst-free reaction was designed to take place at the interface of aqueous nanodroplets in miniemulsion to produce core-shell PNCs with over 90% encapsulation efficiency and no unwanted drug release over storage for several months. Albumins used herein are major constituents of blood and thus ideal biodegradable natural polymers for the production of such nanocarriers. These protein carriers were taken up by dendritic cells and the intracellular drug release by enzymatic degradation of the protein shell material was proven. Together with the thorough colloidal analysis of the PNCs, their stability in human blood plasma and the detailed protein corona composition, these results underline the high potential of such naturally derived drug delivery vehicles.

Spatially resolved photochemical coding of reversibly anchored cysteine-rich domains

We present a novel methodology to generate recodable surfaces using cysteine-rich domains (CRD) via a combination of photolithography and reversible covalently peptide-driven disulfide formation. Therefore, two 21mer CRD peptide derivatives were synthesized, one bearing an electron deficient fumarate group for immobilization via nitrile imine-ene mediated cycloaddition (NITEC) to a tetrazole-functional surface. Secondly, a bromine moiety is introduced to the CRD for analytic labelling purposes to detect surface encoding. The photolithography is conducted by selectively passivating the surface with a polyethylene glycol (PEG)-fumarate via NITEC using a photomask in a dotted pattern. Consecutively, the CRD-fumarate is immobilized via NITEC adjacent to the PEG-functional areas to the unaffected tetrazole covered surface layer. Subsequently, the CRD-bromide is covalently linked to the CRD-fumarate by forming disulfide bonds under mild reoxidative conditions in a buffer solution. The CRD-bromide is released from the surface upon reduction to recover the prior state of the surface without the bromine marker. The analysis of the CRD precursors is based on electrospray ionization mass spectrometry (ESI-MS). The surface analytics were carried out via time-of-flight secondary ion mass spectrometry (ToF-SIMS), unambiguously verifying the successful immobilization as well as coding and decoding of the CRD-bromide on the surface based on dynamically reversible disulfide bond formation.

Conversion of Arylboronic Acids to Tetrazoles Catalyzed by ONO Pincer-Type Palladium Complex

A convenient synthesis of a library of tetrazoles through a novel and operationally simple protocol effecting the direct conversion of arylboronic acids catalyzed by a new ONO pincer-type Pd(II) complex under mild reaction conditions using the readily available reagents is reported. The palladium complex was reused up to four cycles in an open-flask condition.

Single-Step Fabrication of High-Density Microdroplet Arrays of Low-Surface-Tension Liquids

A facile approach for surface patterning that enables single-step fabrication of high-density arrays of low-surface-tension organic-liquid microdroplets is described. This approach enables miniaturized and parallel high-throughput screenings in organic solvents, formation of homogeneous arrays of hydrophobic nanoparticles, polymer micropads of specific shapes, and polymer microlens arrays.

Photochemical Microcontact Printing by Tetrazole Chemistry

We developed a simple method to pattern self-assembled monolayers of tetrazole triethoxylsilane with a variety of different molecules by photochemical microcontact printing. Under irradiation, tetrazoles form highly reactive nitrile imines, which react with alkenes, alkynes, and thiols. The covalent linkage to the surface could be unambiguously demonstrated by fluorescence microscopy, because the reaction product is fluorescent in contrast to tetrazole. The modified surfaces were further analyzed by X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), atomic force microscopy (AFM), and contact angle goniometry. Protein-repellent micropatterns, a biotin-streptavidin array, and structured polymer brushes could be fabricated with this straightforward method for surface functionalization.

Photo-induced coupling reactions of tetrazoles with carboxylic acids in aqueous solution: application in protein labelling

The coupling reactions of diaryltetrazoles with carboxylic acids under UV irradiation were investigated. Application of these transformations in chemical biology was demonstrated in photo-labelling the proteinogenic carboxylic acids in purified proteins, cell lysates and living cells.