Unusually Large Young's Moduli of Amino Acid Molecular Crystals

Molded, Solid-State Biomolecular Assemblies with Programmable Electromechanical Properties

Piezoelectric and ferroelectric technologies are currently dominated by perovskite-based ceramics, not only due to their impressive figures of merit, but due to their versatility in size and shape. This allows the dimensions of, for example, lead zirconium titanate and potassium sodium niobate, to be tailored to the needs of thousands of applications across the automotive, medical device, and consumer electronics industries. In this Letter, we significantly advance the performance and customization of biomolecular crystal (nontoxic, biocompatible amino acids, viz., trans-4-hydroxy-L-proline, L-alanine, hydrates of L-arginine and L-asparagine, and γ-glycine) assemblies by growing them as molded, substrate-free piezoelectric elements. This methodology allows for electromechanical properties to be embedded in these assemblies by fine-tuning the chemistry of the biomolecules and thus the functional properties of the single crystal space group. Here, we report the piezoelectric, mechanical, thermal, and structural properties of these amino acid-based polycrystalline actuators. This versatile, low-cost, low-temperature growth method opens up the path to phase in biomolecular piezoelectrics as high-performance, eco-friendly alternatives to ceramics.

Going beyond the Ordered Bulk: A Perspective on the Use of the Cambridge Structural Database for Predictive Materials Design

When Olga Kennard founded the Cambridge Crystallographic Data Centre in 1965, the Cambridge Structural Database was a pioneering attempt to collect scientific data in a standard format. Since then, it has evolved into an indispensable resource in contemporary molecular materials science, with over 1.25 million structures and comprehensive software tools for searching, visualizing and analyzing the data. In this perspective, we discuss the use of the CSD and CCDC tools to address the multiscale challenge of predictive materials design. We provide an overview of the core capabilities of the CSD and CCDC software and demonstrate their application to a range of materials design problems with recent case studies drawn from topical research areas, focusing in particular on the use of data mining and machine learning techniques. We also identify several challenges that can be addressed with existing capabilities or through new capabilities with varying levels of development effort.

The Dimensionality of Hydrogen Bond Networks Induces Diverse Physical Properties of Peptide Crystals

Short peptides are attractive building blocks for the fabrication of self-assembled materials with significant biological, chemical, and physical properties. The microscopic and macroscopic properties of assemblies are usually closely related to the dimensionality of formed hydrogen bond networks. Here, two completely different supramolecular architectures connected by distinct hydrogen bond networks were obtained by simply adding a hydroxyl group to switch from cyclo-tryptophan-alanine (cyclo-WA) to cyclo-tryptophan-serine (cyclo-WS). While hydroxyl-bearing cyclo-WS molecules provided an additional hydrogen bond donor that links to adjacent molecules, forming a rigid three-dimensional network, cyclo-WA arranged into a water-mediated zipper-like structure with a softer two-dimensional layer template. This subtle alteration resulted in a 14-fold enhancement of Young's modulus values in cyclo-WS compared to cyclo-WA. Both cyclo-dipeptides exhibit biocompatibility, high fluorescence, and piezoelectricity. The demonstrated role of dimensionality of hydrogen bond networks opens new avenues for rational design of materials with precise morphologies and customizable properties for bioelectronic applications.

Surface Engineering of the Mechanical Properties of Molecular Crystals via an Atomistic Model for Computing the Facet Stress Response of Solids

Dynamic molecular crystals are an emerging class of crystalline materials that can respond to mechanical stress by dissipating internal strain in a number of ways. Given the serendipitous nature of the discovery of such crystals, progress in the field requires advances in computational methods for the accurate and high-throughput computation of the nanomechanical properties of crystals on specific facets which are exposed to mechanical stress. Here, we develop and apply a new atomistic model for computing the surface elastic moduli of crystals on any set of facets of interest using dispersion-corrected density functional theory (DFT-D) methods. The model was benchmarked against a total of 24 reported nanoindentation measurements from a diverse set of molecular crystals and was found to be generally reliable. Using only the experimental crystal structure of the dietary supplement, L-aspartic acid, the model was subsequently applied under blind test conditions, to correctly predict the growth morphology, facet and nanomechanical properties of L-aspartic acid to within the accuracy of the measured elastic stiffness of the crystal, 24.53±0.56 GPa. This work paves the way for the computational design and experimental realization of other functional molecular crystals with tailor-made mechanical properties.

Frontiers of molecular crystal structure prediction for pharmaceuticals and functional organic materials

The reliability of organic molecular crystal structure prediction has improved tremendously in recent years. Crystal structure predictions for small, mostly rigid molecules are quickly becoming routine. Structure predictions for larger, highly flexible molecules are more challenging, but their crystal structures can also now be predicted with increasing rates of success. These advances are ushering in a new era where crystal structure prediction drives the experimental discovery of new solid forms. After briefly discussing the computational methods that enable successful crystal structure prediction, this perspective presents case studies from the literature that demonstrate how state-of-the-art crystal structure prediction can transform how scientists approach problems involving the organic solid state. Applications to pharmaceuticals, porous organic materials, photomechanical crystals, organic semi-conductors, and nuclear magnetic resonance crystallography are included. Finally, efforts to improve our understanding of which predicted crystal structures can actually be produced experimentally and other outstanding challenges are discussed.

Precise Design of Molecular Ferroelectrics with High TC and Tunable Band Gap by Molecular Modification

Molecular ferroelectric materials are widely applied in piezoelectric converters, non-volatile memorizers, and photovoltaic devices due to their advantages of adjustable structure, lightweight, easy processing, and environmental friendliness. However, designing multifunctional molecular ferroelectrics with excellent properties has always been a great challenge. Herein, a multiaxial molecular ferroelectric is successfully designed by modifying the quasi-spherical cation dabco with CuBr₂ to obtain halogenated [Bretdabco]CuBr₄ (Bretdabco = N-bromoethyl-N'-diazabicyclo [2.2.2]octane), which crystallizes in polar point groups (C₆). Typical ferroelectric behaviors featured by the P-E hysteresis loop and switched ferroelectric domain are exhibited. Notably, the molecular ferroelectric shows a high T_C of 460 K, which is rare in the field and could greatly expand the application range of this material. In addition, the band gap is adjustable through the regulation of halogen. Both the UV absorption spectra and theoretical calculations indicate that the molecular ferroelectrics belong to a direct band gap (2.14 eV) semiconductor. This tunable and narrow band gap semiconductor molecular ferroelectric material with high T_C can be utilized more effectively in the study of optoelectronics and sensors, including piezoelectric energy harvesters. This research may provide a promising approach for the development of multiaxial molecular ferroelectrics with a tiny band gap and high T_C.

Physicochemical Principles of Adhesion Mechanisms in the Brain

The brain functions through neuronal circuits and networks that are synaptically connected. This type of connection can exist due to physical forces that interact to stabilize local contacts in the brain. Adhesion is a fundamental physical phenomenon that allows different layers, phases, and tissues to connect. Similarly, synaptic connections are stabilized by specialized adhesion proteins. This review discusses the basic physical and chemical properties of adhesion. Cell adhesion molecules (CAMs) such as cadherins, integrins, selectins, and immunoglobulin family of cell adhesion molecules (IgSF) will be discussed, and their role in physiological and pathological brain function. Finally, the role of CAMs at the synapse will be described. In addition, methods for studying adhesion in the brain will be presented.

Identification of biomolecule-based electronic materials from a first-principles study of aliphatic amino acids

Biomolecule-based electronic materials can enable health innovations by virtue of their intrinsic bioactivity and physical properties. However, the ultra-wide bandgap and limited piezoelectric properties of most biomaterials prevent them from reaching their full potential. Herein, the electronic structures and electromechanical properties of aliphatic amino acid crystals are investigated based on density functional theory. L-Met is found to be a wide bandgap p-type semiconductor, and the much-reduced bandgap of 2.88 eV is ascribed to the sulphur atoms in L-Met. L-Leu has a shear piezoelectric voltage constant of 2.706 V mN^-1 that is over an order of magnitude higher than that of lead zirconate titanate, and good toughness and ductility are also revealed in L-Leu from mechanical property investigations. This study illustrates a computational approach to find smart and multifunctional biomaterials and inspire their growth and applications.

Racemic Amino Acid Assembly Enables Supramolecular β-Sheet Transition with Property Modulations

Amino acids are the most simplistic bio-building blocks and perform a variety of functions in metabolic activities. Increasing publications report that amino acid-based superstructures present amyloid-like characteristics, arising from their supramolecular β-sheet secondary structures driven by hydrogen-bonding-connected supramolecular β-strands, which are formed by head-to-tail hydrogen bonds between terminal amino and carboxyl groups of the adjacent residues. Therefore, the establishment of the structure-function relationships is critical for exploring the properties and applications of amino acid assemblies. Among the naturally encoded self-assembling amino acids, tyrosine (Y)-based superstructures have been found to show diverse properties and functions including high rigidity, promoting melanin formations, mood regulations, and preventing anxiety, thus showing promising potential as next-generation functional biomaterials for biomedical and bio-machine interface applications. However, the development of Y-based organizations of functional features is severely limited due to the intrinsic difficulty of modulating the energetically stable supramolecular β-sheet structures. Herein, we report that by the racemic assembly of l-Y and d-Y, the supramolecular secondary structures are modulated from the antiparallel β-sheets in the enantiomeric assemblies to the parallel ones in the racemate counterparts, thus leading to higher degrees of freedom, which finally induce distinct organization kinetics and modulation of the physicochemical properties including the optical shifts, elastic softening, and the piezoelectric outputs of the superstructures.

Methine initiated polypropylene-based disposable face masks aging validated by micromechanical properties loss of atomic force microscopy

The contagious coronavirus disease-2019 pandemic has led to an increasing number of disposable face masks (DFMs) abandoned in the environment, when they are exposed to the air condition, the broken of chemical bond induced aging is inevitably occurred which meantime would cause a drastic decrease of the mechanical flexibility. However, the understanding of between chemical bond change related to aging and its micromechanical loss is limited due to the lack of refined techniques. Herein, the atomic force microscopy (AFM) technique was firstly used to observe the aging process induced by methine of the polypropylene-based DFMs. By comparing the micromechanical properties loss, the influences of humidity and light density on the DFM aging were systematically studied in the early 72 h, and it revealed that the increasing scissions number of the easiest attacked methine (C^t-H) can gradually decrease the micromechanical properties of the polypropylene (PP)-based DFM. Furthermore, the results are also validated by the in- situ FTIR and XPS analysis. This work discloses that an aging process can be initially estimated with the micromechanical changes observed by AFM, which offers fundamental data to manage this important emerging plastic pollution during COVID-19 pandemic.

Rational Design of Biological Crystals with Enhanced Physical Properties by Hydrogen Bonding Interactions

Hydrogen bonds are non-covalent interactions and essential for assembling supermolecules into ordered structures in biological systems, endowing crystals with fascinating physical properties, and inspiring the construction of eco-friendly electromechanical devices. However, the interplay between hydrogen bonding and the physical properties is not fully understood at the molecular level. Herein, we demonstrate that the physical property of biological crystals with double-layer structures could be enhanced by rationally controlling hydrogen bonding interactions between amino and carboxyl groups. Different hydrogen bonding interactions result in various thermal, mechanical, electronic, and piezoelectric properties. In particular, the weak interaction between O and H atoms contributes to low mechanical strength that permits important ion displacement under stress, giving rise to a strong piezoelectric response. This study not only reveals the correlation between the hydrogen bonding and physical properties in double-layer structures of biological crystals but also demonstrates the potential of these crystals as functional biomaterials for high-performance energy-harvesting devices. Theoretical calculations and experimental verifications in this work provide new insights into the rational design of biomaterials with desirable physical properties for bioelectrical devices by modulating intermolecular interactions.

Engineering of Pyroelectric Crystals Decoupled from Piezoelectricity as Illustrated by Doped α‐Glycine

Design of pyroelectric crystals decoupled from piezoelectricity is not only a topic of scientific curiosity but also demonstrates effects in principle that have the potential to be technologically advantageous. Here we report a new method for the design of such materials. Thus, the co-doping of centrosymmetric crystals with tailor-made guest molecules, as illustrated by the doping of α-glycine with different amino acids (Threonine, Alanine and Serine). The polarization of those crystals displays two distinct contributions, one arising from the difference in dipole moments between guest and host and the other from the displacement of host molecules from their symmetry-related positions. These contributions exhibit different temperature dependences and response to mechanical deformation. Thus, providing a proof of concept for the ability to design pyroelectric materials with reduced piezoelectric coefficient (d₂₂ ) to a minimal value, below the resolution limit of the method (<0.005 pm/V).

An extended macroindentation method for determining the hardness of poorly compressible materials

Indentation hardness, H, is an important mechanical property that quantifies the resistance to deformation by a material. For pharmaceutical powders, H can be determined using a macroindentation method, provided they can form intact tablets suitable for testing. This work demonstrates a method for determining the hardness of problematic materials that cannot form suitable tablets for macroindentation. The method entails predicting the hardness of a given powder at zero porosity (H₀) from those of microcrystalline cellulose and its binary mixture with the test compound using a power law mixing rule based on weight fraction. This method was found suitable for 13 binary mixtures. In addition, the H₀ values derived by this method could capture changes due to different particle sizes of sucrose and sodium chloride. Furthermore, the derived H₀ reasonably agreed with the single crystal indentation hardness of a set of 16 crystals when accounting for the effect of indentation condition and structural anisotropy. The mixture method thus extends the use of macroindentation for predicting indentation hardness of powders that cannot form intact tablets and, hence, their plasticity.

Peptide Coassembly to Enhance Piezoelectricity for Energy Harvesting

The discovery of piezoelectricity in self-assembled peptide nanostructures opens an avenue to a new regime of piezoelectric materials and enables the fundamental investigation of electromechanical coupling in biomaterials. However, strategies for fabricating peptides with desired properties are still lacking. We find that a peptide-based coassembly process effectively controls the properties of peptide nanomaterials and demonstrates their application potential in nanogenerators. The composing peptides and their concentration influence the morphology, molecular property, and physical property of coassembled crystals. Compared with self-assembled diphenylalanine peptides, the coassembled peptides of diphenylalanine and phenylalanine-tryptophan show a 38% increase in piezoelectric coefficient, and the resulting harvesting device shows nearly a 3-fold increase in open-circuit voltage outputs.

Global Analysis of the Mechanical Properties of Organic Crystals

Organic crystals, although widely studied, have not been considered nascent candidate materials in the engineering design. Here we summarize the reported mechanical properties of organic crystals reported over the past three decades, and we establish a global mechanical property profile that can be used to predict and identify mechanically robust organic crystals. Being composed of light elements, organic crystals populate a narrow region in the mechanical property-density space between soft, disordered organic materials and stiff, ordered materials. Two subsets of extraordinarily stiff and hard organic crystalline materials were identified and rationalized by the normalized number density, strength and directionality of their intermolecular interactions. We conclude that the future light-weight, soft, all-organic components in devices should capitalize on the combination of long-range structural order and softness as the greatest asset of organic single crystals.

Thermo-Induced Single-Crystal-to-Single-Crystal Transformations and Photo-Induced [2+2] Cycloaddition Reactions in Polymorphs of Chalcone-Based Molecular Crystals: Multi-Stimuli Responsive Actuators

The polymorphs of 2ClChMe-4 in Form I (ribbon-like crystal) and Form II (block-like crystal) were prepared, and they exhibited curling/flipping and expansion upon heating on account of single-crystal-to-single-crystal transformations. The irreversible phase transformations occurred separately at 53.2 °C and 57.8 °C for the crystals in Form I and Form II, during which the molecular conformation of 2ClChMe-4 changed and the molecules slipped along the (100) plane. Movement at the molecular level resulted in changes of cell parameters, which in turn led to macroscopic motions of the crystals upon heating. Additionally, the ribbon-like crystals of 2ClChMe-4 showed photo-induced bending driven by [2+2] cycloaddition. Accordingly, an actuator showing reversible bending behavior was fabricated triggered by light and heat successively. Like biomimetic self-actuators, such multi-stimuli mechanical responsive molecular crystals might have potential applications in soft robots, artificial muscles and microfluidic systems.

A Piezoelectric Ionic Cocrystal of Glycine and Sulfamic Acid

Cocrystallization of two or more molecular compounds can dramatically change the physicochemical properties of a functional molecule without the need for chemical modification. For example, coformers can enhance the mechanical stability, processability, and solubility of pharmaceutical compounds to enable better medicines. Here, we demonstrate that amino acid cocrystals can enhance functional electromechanical properties in simple, sustainable materials as exemplified by glycine and sulfamic acid. These coformers crystallize independently in centrosymmetric space groups when they are grown as single-component crystals but form a noncentrosymmetric, electromechanically active ionic cocrystal when they are crystallized together. The piezoelectricity of the cocrystal is characterized using techniques tailored to overcome the challenges associated with measuring the electromechanical properties of soft (organic) crystals. The piezoelectric tensor of the cocrystal is mapped using density functional theory (DFT) computer models, and the predicted single-crystal longitudinal response of 2 pC/N is verified using second-harmonic generation (SHG) and piezoresponse force microscopy (PFM). The experimental measurements are facilitated by polycrystalline film growth that allows for macroscopic and nanoscale quantification of the longitudinal out-of-plane response, which is in the range exploited in piezoelectric technologies made from quartz, aluminum nitride, and zinc oxide. The large-area polycrystalline film retains a damped response of ≥0.2 pC/N, indicating the potential for application of such inexpensive and eco-friendly amino acid-based cocrystal coatings in, for example, autonomous ambient-powered devices in edge computing.

Understanding the unusual stiffness of hydrophobic dipeptide crystals

The hydrophobic diphenylalanine peptide crystal is known to be unusually stiff, with an experimental Young's modulus in the range of 19-27 GPa. Here it is shown by means of density functional theory calculations that phenylalanine-leucine, leucine-phenylalanine, alanine-valine, valine-alanine and valine-valine hydrophobic dipeptide crystals are also unusually stiff, with Young's moduli in the range of 19.7-33.3 GPa. To further our understanding of the origin of that unusual stiffness, a linear correlation is established between Young's modulus and the strength and orientation of the hydrogen bond network developed along the crystals, showing that stiffness in these materials is primarily dictated by hydrogen bonding.

An insight into predictive parameters of tablet capping by machine learning and multivariate tools

Capping is the frequently observed mechanical defect in tablets arising from the sub-optimal selection of the formulation composition and their robustness of response toward process parameters. Hence, overcoming capping propensity based on the understanding of suitable process and material parameters is of utmost importance to expedite drug product development. In the present work, 26 diverse formulations were characterized at commercial tableting condition to identify key tablet properties influencing capping propensity, and a predictive model based on threshold properties was established using machine learning and multivariate tools. It was found that both the compaction parameters (i.e., compaction pressure, radial stress transmission characteristics, and Poisson's ratio), and the material properties, (i.e., brittleness, yield strength, particle bonding strength and elastic recovery) strongly dictate the capping propensity of a tablet. In addition, ratio of elastic modulus in the orthogonal direction in a tablet and its variation with porosity were notable quantitative metrics of capping occurrence.

A semi-empirical model for estimation of flaw size in internally defective tablets

Capping is a mechanical defect in tablets, which is attributed to multiple factors including intrinsic material properties and tableting conditions. A suitable non-destructive approach using acoustically derived elastic modulus has showed distinctive features between a defective tablet and a defect-free tablet. In this work, a semi-empirical model was developed to estimate flaw size in an internally defective tablet from the relationship among elastic modulus, tablet density, and time of flight (acoustic wave to traverse through the tablet). The model was found fundamentally consistent where the derived flaw size showed clear dependence on powder mechanical properties of seven diverse formulations studied. Furthermore, the flaw size was reasonably correlated with the internal tablet microstructure illustrated by X-ray micro-tomography findings, both qualitatively and quantitatively. This model could thus be efficiently implemented for risk-based evaluation of internal defects in visibly intact tablets to ensure robustness of drug products.

Mechanically robust amino acid crystals as fiber-optic transducers and wide bandpass filters for optical communication in the near-infrared

Organic crystals are emerging as mechanically compliant, light-weight and chemically versatile alternatives to the commonly used silica and polymer waveguides. However, the previously reported organic crystals were shown to be able to transmit visible light, whereas actual implementation in telecommunication devices requires transparency in the near-infrared spectral range. Here we demonstrate that single crystals of the amino acid L-threonine could be used as optical waveguides and filters with high mechanical and thermal robustness for transduction of signals in the telecommunications range. On their (00\documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$\bar 1$$\end{document}1¯) face, crystals of this material have an extraordinarily high Young’s modulus (40.95 ± 1.03 GPa) and hardness (1.98 ± 0.11 GPa) for an organic crystal. First-principles density functional theory calculations, used in conjunction with analysis of the energy frameworks to correlate the structure with the anisotropy in the Young’s modulus, showed that the high stiffness arises as a consequence of the strong charge-assisted hydrogen bonds between the zwitterions. The crystals have low optical loss in the O, E, S and C bands of the spectrum (1250−1600 nm), while they effectively block infrared light below 1200 nm. This property favors these and possibly other related organic crystals as all-organic fiber-optic waveguides and filters for transduction of information.

Fiber-optics based on organic crystals could have potential for unique telecommunications applications but typically transmit visible wavelengths. Here the authors present mechanically robust organic crystals with favourable optical properties across the main telecommunication bands in the near-infrared.

Effect of dehydration pathway on the surface properties of molecular crystals

Atomic force microscopy was used to determine roughness, elastic modulus and work function after thermally-induced and solvent-induced dehydration. These properties correlated with electric charging to provide insight into behaviour of bulk powders.

Elastic anisotropy of mechanically responsive molecular solids

Unique mechanical properties in molecular solids arise from a specific combination of structure and interaction anisotropy. Powder Brillouin light scattering offers new insight into the latter contribution to test current models for mechanical design.

Probing anisotropic mechanical behaviour in carbamazepine form III

Nanoindentation measurements in single crystals of carbamazepine form III show that the (020) face is stiffer and harder than the (002) and (101) faces. AFM imaging and molecular simulations reveal that the (020) plane is the most likely slip plane.

Impact of polymorphism on mechanical properties of molecular crystals: a study of p-amino and p-nitro benzoic acid with nanoindentation

We report on nanoindentation data for two pairs of polymorphic compounds of p-aminobenzoic acid (pABA) and p-nitrobenzoic acid (pNBA) and compare it with existing data in the literature. We also explore on a new parameter, s-PBC, as a tool to estimate hardness.

Density functional theory predictions of the mechanical properties of crystalline materials

The DFT-predicted mechanical properties of crystalline materials are crucial knowledge for their screening, design, and exploitation.

Surface Piezoelectricity and Pyroelectricity in Centrosymmetric Materials: A Case of α-Glycine

Surface pyroelectricity and piezoelectricity induced by water incorporation during growth in α-glycine were investigated. Using the periodic temperature change technique, we have determined the thickness (~280 µm) of the near surface layer (NSL) and its pyroelectric coefficient (160 pC/(K × cm²) at 23 °C) independently. The thickness of NSL remains nearly constant till 60 °C and the pyroelectric effect vanishes abruptly by 70 °C. The piezoelectric effect, 0.1 pm/V at 23 °C measured with an interferometer, followed the same temperature dependence as the pyroelectric effect. Abrupt disappearance of both effects at 70 °C is irreversible and suggests that water incorporation to α-glycine forms a well defined near surface phase, which is different form α-glycine because it is polar but it too close to α-glycine to be distinguished by X-ray diffraction (XRD). The secondary pyroelectric effect was found to be <14% of the total, which is unexpectedly small for a material with a large thermal expansion coefficient. This implies that water incorporation infers minimal distortions in the host lattice. This finding suggests a path for the control of the piezoelectric and pyroelectric effects of the crystals using stereospecific incorporation of the guest molecules.

Tabletability Flip - Role of Bonding Area and Bonding Strength Interplay

Predicting tableting performance of mixtures from that of individual components is of practical importance for achieving efficient and robust tablet design. It has been commonly assumed that a solid form exhibiting better tabletability will result in better tabletability when formulated. However, we show that the rank order of tabletability between two powders can flip when mixed with another powder, a phenomenon termed tabletability flip. Using three examples, we show that the tabletability flip upon mixing with microcrystalline cellulose is activated by the switch of the dominating factor in the bonding area (BA) and bonding strength (BS) interplay that determines tablet tensile strength. A mechanistic understanding of this phenomenon can significantly improve the accuracy of predicted tableting performance of mixtures from that of individual powders.

Global Performance Indices for Dynamic Crystals as Organic Thermal Actuators

Crystal adaptronics is an emergent materials science discipline at the intersection of solid-state chemistry and mechanical engineering that explores the dynamic nature of mechanically reconfigurable, motile, and explosive crystals. Adaptive molecular crystals bring to materials science a qualitatively new set of properties that associate long-range structural order with softness and mechanical compliance. However, the full potential of this class of materials remains underexplored and they have not been considered as materials of choice in an engineer's toolbox. A set of general performance metrics that can be used for quantification of the performance of these prospective dynamic materials as micro- and macroactuators is presented. The indices are calculated on two selected representatives of thermosalient solids-materials that undergo rapid martensitic transitions accompanied with macroscopic locomotion. Benchmarking of their performance against extensive set of data for the existing actuator classes and visualization using materials property charts uncover the hidden potential and advantages of dynamic crystals, while they also reveal their drawbacks for actual application as actuators. Altogether the results indicate that, if the challenges with fabrication and implementation in devices are overcome, adaptive molecular crystals can have far-reaching implications for emerging fields such as smart microelectronics and soft microrobotics.

Investigating the solid-state assembly of pharmaceutically-relevant N,N-dimethyl-O-thiocarbamates in the absence of labile hydrogen bonds

There are many active pharmaceutical ingredients that lack N–H, O–H and S–H hydrogen-bond donor functional groups.

The landscape of mechanical properties of molecular crystals

An analysis of compiled literature nanoindentation contact hardness (H_c) and elastic modulus (E) values of molecular crystals revealed a wide range of mechanical properties (0.001–1.80 GPa for H_c and 0.27–46.8 GPa for E).

Piezoelectric Peptide and Metabolite Materials

Piezoelectric materials are important for many physical and electronic devices. Although many piezoelectric ceramics exhibit good piezoelectricity, they often show poor compatibility with biological systems that limits their biomedical applications. Piezoelectric peptide and metabolite materials benefit from their intrinsic biocompatibility, degradability, and convenient biofunctionalization and are promising candidates for biological and medical applications. Herein, we provide an account of the recent progress of research works on piezoelectric peptide and metabolite materials. This review focuses on the growth mechanism of peptide and metabolite micro- and nanomaterials. The influence of self-assembly processes on their piezoelectricity is discussed. Peptide and metabolite materials demonstrate not only outstanding piezoelectric properties but also unique electronic, optical, and physical properties, enabling their applications in nanogenerators, sensors, and optical waveguiding devices.

Mechanically rigid supramolecular assemblies formed from an Fmoc-guanine conjugated peptide nucleic acid

The variety and complexity of DNA-based structures make them attractive candidates for nanotechnology, yet insufficient stability and mechanical rigidity, compared to polyamide-based molecules, limit their application. Here, we combine the advantages of polyamide materials and the structural patterns inspired by nucleic-acids to generate a mechanically rigid fluorenylmethyloxycarbonyl (Fmoc)-guanine peptide nucleic acid (PNA) conjugate with diverse morphology and photoluminescent properties. The assembly possesses a unique atomic structure, with each guanine head of one molecule hydrogen bonded to the Fmoc carbonyl tail of another molecule, generating a non-planar cyclic quartet arrangement. This structure exhibits an average stiffness of 69.6 ± 6.8 N m-1 and Young's modulus of 17.8 ± 2.5 GPa, higher than any previously reported nucleic acid derived structure. This data suggests that the unique cation-free "basket" formed by the Fmoc-G-PNA conjugate can serve as an attractive component for the design of new materials based on PNA self-assembly for nanotechnology applications.

Mechanically interlocked architecture aids an ultra-stiff and ultra-hard elastically bendable cocrystal

Molecular crystals are not known to be as stiff as metals, composites and ceramics. Here we report an exceptional mechanical stiffness and high hardness in a known elastically bendable organic cocrystal [caffeine (CAF), 4-chloro-3-nitrobenzoic acid (CNB) and methanol (1:1:1)] which is comparable to certain low-density metals. Spatially resolved atomic level studies reveal that the mechanically interlocked weak hydrogen bond networks which are separated by dispersive interactions give rise to these mechanical properties. Upon bending, the crystals significantly conserve the overall energy by efficient redistribution of stress while perturbations in hydrogen bonds are compensated by strengthened π-stacking. Furthermore we report a remarkable stiffening and hardening in the elastically bent crystal. Hence, mechanically interlocked architectures provide an unexplored route to reach new mechanical limits and adaptability in organic crystals. This proof of concept inspires the design of light-weight, stiff crystalline organics with potential to rival certain inorganics, which currently seem inconceivable.

A large anisotropic plasticity of L-leucinium hydrogen maleate preserved at cryogenic temperatures

L-Leucinium hydrogen maleate crystals are very plastic at ambient conditions. Here it is shown that this plasticity is preserved at least down to 77 K. The structural changes in the temperature range 293-100 K were followed in order to rationalize the large anisotropic plasticity in this compound. To the best of our knowledge, this is the first reported example of an organic compound remaining so plastic at cryogenic conditions.

The Sheaths of Methanospirillum Are Made of a New Type of Amyloid Protein

The genera Methanospirillum and Methanosaeta contain species of anaerobic archaea that grow and divide within proteinaceous tubular sheaths that protect them from environmental stressors. The sheaths of Methanosaeta thermophila PT are composed of the 60.9 kDa major sheath protein MspA. In this study we show that sheaths purified from Methanospirillum hungatei JF-1 are regularly striated tubular structures with amyloid-like properties similar to those of M. thermophila PT. Depolymerizing the sheaths from M. hungatei JF-1 allowed us to identify a 40.6 kDa protein (WP_011449234.1) that shares 23% sequence similarity to MspA from M. thermophila PT (ABK14853.1), indicating that they might be distant homologs. The genome of M. hungatei JF-1 encodes six homologs of the identified MspA protein. Several homologs also exist in the related strains Methanospirillum stamsii Pt1 (7 homologs, 28–66% sequence identity), M. lacunae Ki8-1 C (15 homologs, 29–60% sequence identity) and Methanolinea tarda NOBI-1 (2 homologs, 31% sequence identity). The MspA protein discovered here could accordingly represent a more widely found sheath protein than the MspA from M. thermophila PT, which currently has no homologs in the NCBI Reference Sequence database (RefSeq).

Deconstructing collagen piezoelectricity using alanine-hydroxyproline-glycine building blocks

Collagen piezoelectricity has been the focus of a large number of experimental and theoretical studies for over fifty years. Less is known about the piezoelectric properties of its building blocks, in particular but not limited to, proline and hydroxyproline. Spurred by the recent upsurge of interest in piezoelectricity in organic crystals including our own report of unprecedentedly high piezoelectricity in amino acid glycine, we predict and measure the piezoelectric properties of collagen subcomponents in single crystalline forms and the collagen-like alanine-hydroxyproline-glycine trimer peptide. We map the modulation of piezoelectric charge constants in collagen building blocks as the crystal symmetry is lowered and the molecule size increases, finding strong evidence for amino acid-level barcoding of collagen piezoelectricity that can in turn be tuned using very simple chemistry. The simple addition of an -OH group can increase piezoelectric constants by up to two orders of magnitude (d25 = 25 ± 5 pC N-1) as measured in Y-cut hydroxyproline crystals. The value is similar to that obtained from thermoelectrically poled commercial polyvinylidene di fluoride (PVDF) films. Overall, our findings support a simple block by block approach in which first principles calculations can guide the understanding and re-engineering of piezoelectric biomolecules.

Control of piezoelectricity in amino acids by supramolecular packing

Piezoelectricity, the linear relationship between stress and induced electrical charge, has attracted recent interest due to its manifestation in biological molecules such as synthetic polypeptides or amino acid crystals, including gamma (γ) glycine. It has also been demonstrated in bone, collagen, elastin and the synthetic bone mineral hydroxyapatite. Piezoelectric coefficients exhibited by these biological materials are generally low, typically in the range of 0.1-10 pm V^-1, limiting technological applications. Guided by quantum mechanical calculations we have measured a high shear piezoelectricity (178 pm V^-1) in the amino acid crystal beta (β) glycine, which is of similar magnitude to barium titanate or lead zirconate titanate. Our calculations show that the high piezoelectric coefficients originate from an efficient packing of the molecules along certain crystallographic planes and directions. The highest predicted piezoelectric voltage constant for β-glycine crystals is 8 V mN^-1, which is an order of magnitude larger than the voltage generated by any currently used ceramic or polymer.

Bioinspired Flexible and Tough Layered Peptide Crystals

One major challenge of functional material fabrication is combining flexibility, strength, and toughness. In several biological and artificial systems, these desired mechanical properties are achieved by hierarchical architectures and various forms of anisotropy, as found in bones and nacre. Here, it is reported that crystals of N-capped diphenylalanine, one of the most studied self-assembling systems in nanotechnology, exhibit well-ordered packing and diffraction of sub-Å resolution, yet display an exceptionally flexible nature. To explore this flexibility, the mechanical properties of individual crystals are evaluated, assisted by density functional theory calculations. High-resolution scanning electron microscopy reveals that the crystals are composed of layered self-assembled structures. The observed combination of strength, toughness, and flexibility can therefore be explained in terms of weak interactions between rigid layers. These crystals represent a novel class of self-assembled layered materials, which can be utilized for various technological applications, where a combination of usually contradictory mechanical properties is desired.

On the origin of the great rigidity of self-assembled diphenylalanine nanotubes

The elastic properties of the nanotubes of self-assembled aromatic dipeptide diphenylalanine are investigated by means of Raman spectroscopy and a mass-in-mass 1D model. Analysis of nanotubes' lattice vibrations reveals the essential contribution of the water in the nanochannel core of the tubes to the Young's modulus and high water mobility along the channel. Direct measurements of the Young's modulus performed by nanoindentation confirm the obtained results.

CrystalExplorer model energies and energy frameworks: extension to metal coordination compounds, organic salts, solvates and open-shell systems

The application domain of accurate and efficient CE-B3LYP and CE-HF model energies for intermolecular interactions in molecular crystals is extended by calibration against density functional results for 1794 molecule/ion pairs extracted from 171 crystal structures. The mean absolute deviation of CE-B3LYP model energies from DFT values is a modest 2.4 kJ mol-1 for pairwise energies that span a range of 3.75 MJ mol-1. The new sets of scale factors determined by fitting to counterpoise-corrected DFT calculations result in minimal changes from previous energy values. Coupled with the use of separate polarizabilities for interactions involving monatomic ions, these model energies can now be applied with confidence to a vast number of molecular crystals. Energy frameworks have been enhanced to represent the destabilizing interactions that are important for molecules with large dipole moments and organic salts. Applications to a variety of molecular crystals are presented in detail to highlight the utility and promise of these tools.

Origin and structure of polar domains in doped molecular crystals

Doping is a primary tool for the modification of the properties of materials. Occlusion of guest molecules in crystals generally reduces their symmetry by the creation of polar domains, which engender polarization and pyroelectricity in the doped crystals. Here we describe a molecular-level determination of the structure of such polar domains, as created by low dopant concentrations (<0.5%). The approach comprises crystal engineering and pyroelectric measurements, together with dispersion-corrected density functional theory and classical molecular dynamics calculations of the doped crystals, using neutron diffraction data of the host at different temperatures. This approach is illustrated using centrosymmetric α-glycine crystals doped with minute amounts of different L-amino acids. The experimentally determined pyroelectric coefficients are explained by the structure and polarization calculations, thus providing strong support for the local and global understanding of how different dopants influence the properties of molecular crystals.