Stereospecific Ring‐Opening Metathesis Polymerization of Norbornene Catalyzed by Iron Complexes

Hydrazine-Catalysed Ring-Opening Metathesis Polymerization Of Cyclobutenes

Materials formed by the ring-opening metathesis polymerization (ROMP) of cyclic olefins are highly valued for industrial and academic applications but are difficult to prepare free of metal contaminants. Here we describe a highly efficient metal-free ROMP of cyclobutenes using hydrazine catalysis. Reactions can be initiated via in situ condensation of a [2.2.2]-bicyclic hydrazine catalyst with an aliphatic or aromatic aldehyde initiator. The polymerizations show living characteristics, achieving excellent control over molecular weight, low dispersity values, and high chain-end fidelity. Additionally, the hydrazine can be used in substoichiometric amounts relative to the aldehyde chain-end while maintaining good control over molecular weight and low dispersity values, indicating that a highly efficient chain transfer mechanism is occurring.

Mechanistic Insights into the cis-Selective Catalytic Ring-Opening Metathesis Polymerization

Cis-selective ring-opening metathesis polymerization (ROMP) with the commercial Grubbs "nitrato catalyst" has shown promise for synthesizing stereoregular materials, but it comes with the drawback of losing control over the molecular weight due to the poor initiation rate of the catalyst and the need for stoichiometric ruthenium complex loading. To address these issues, we developed a chain transfer polymerization method that allows for the catalytic synthesis of polymers while controlling the degree of polymerization. This allowed us to produce shorter polymers with exceptional chain-end control. Analysis of the polymers revealed a novel double monomer addition mechanism for this catalyst. MALDI-ToF mass spectrometric measurements showed that when using small monomers like norbornene, the polymer chains contained only odd numbers of monomers. In contrast, the polymerization of norbornene-imide-type monomers shows a major distribution with odd numbers of monomers along with a minor distribution of even numbers. This unique distribution of polymer chain types had not been previously observed in ROMP. We explain this phenomenon by the chiral nature of the catalyst that yields two isomeric catalytic species with dissimilar reactivities toward monomer and chain transfer agents.

Iron Olefin Metathesis: Unlocking Reactivity and Mechanistic Insights

Olefin metathesis catalyzed by iron complexes has garnered substantial interest due to iron's abundance and nontoxicity relative to ruthenium, yet its full potential remains untapped, largely because of the propensity of iron carbenes to undergo cyclopropanation instead of cycloreversion from a metallacycle intermediate. In this report, we elucidate the reactions of [{PC(sp2)P}Fe(L)(N2)], ([PC(sp2)P] = bis[2-(diisopropylphosphino)phenyl]methylene) with strained olefins, unveiling their capability to yield metathesis-related products. Our investigations led to the isolation of a structurally characterized metallacyclobutane during the reaction with norbornadiene derivatives, ultimately leading to a ring-opened iron alkylidene. These findings provide compelling evidence that iron complexes adhere to the Chauvin olefin metathesis mechanism.

Deconstruction of Polymers through Olefin Metathesis

The consumption of synthetic polymers has ballooned; so has the amount of post-consumer waste generated. The current polymer economy, however, is largely linear with most of the post-consumer waste being either landfilled or incinerated. The lack of recycling, together with the sizable carbon footprint of the polymer industry, has led to major negative environmental impacts. Over the past few years, chemical recycling technologies have gained significant traction as a possible technological route to tackle these challenges. In this regard, olefin metathesis, with its versatility and ease of operation, has emerged as an attractive tool. Here, we discuss the developments in olefin-metathesis-based chemical recycling technologies, including the development of new materials and the application of olefin metathesis to the recycling of commercial materials. We delve into structure-reactivity relationships in the context of polymerization-depolymerization behavior, how experimental conditions influence deconstruction outcomes, and the reaction pathways underlying these approaches. We also look at the current hurdles in adopting these technologies and relevant future directions for the field.

Is Mn(I) More Promising Than Fe(II)-A Comparison of Mn vs Fe Complexes for Olefin Metathesis

Olefin metathesis is one of the most significant transformations in organic chemistry and is an excellent example for efficient homogeneous catalysis. Although most currently used catalysts are primarily based on 4d and 5d metals, cycloaddition and cycloreversion reactions can also be attributed to first-row transition metals, such as Fe. Surprisingly, the potential of Mn(I)-based catalysts for olefin metathesis has been unexplored despite their prominence in homogeneous catalysis and their diagonal relationship to Ru(II). In the present study, we have investigated the prospective capabilities of Mn complexes for cycloaddition and reversion reactions using density functional theory. Therefore, we have initially compared the literature known iron model systems and their isoelectronic Mn counterparts regarding their reactivity and electronic structure. Next, we constructed potential Mn complexes derived from synthetically accessible species, including carbonyl ligands and obeying octahedral geometry. Based on thermodynamic parameters and the calculation of electronic descriptors, we were able to validate the isodiagonal relationship. Our study serves as guidance for the experimental chemist.

N-(2-(Diphenylphosphino)ethyl)-2-alkyl-5,6,7,8-tetrahydro-quinolin-8-amines iron(ii) complexes: structural diversity and the ring opening polymerization of ε-caprolactone

A series of N-(2-(diphenylphosphino)ethyl)-2-alkyl-5,6,7,8-tetrahydroquinolin-8-amines was prepared and used in individually reacting with iron chloride under nitrogen atmosphere to form their iron(ii) complexes Fe1-Fe6. All compounds were characterized using FT-IR spectroscopy and elemental analyses, the organic compounds were confirmed with NMR measurements, and the iron complexes were submitted to single-crystal X-ray diffraction, revealing Fe1, Fe2, Fe4, Fe5, and Fe6 as either mono- or di-nuclear forms. Forming a binary system in situ with two equivalents of LiCH2SiMe3, all iron complexes Fe1-Fe6 efficiently initiated the ring opening polymerization of ε-caprolactone, achieving the TOF up to 8.8 × 103 h-1. More importantly, the resultant polycaprolactone (PCL) possessed high molecular weights with the Mn range of 9.21-24.3 × 104 g mol-1, being a rare case of the iron(ii) catalyst in producing PCL with such high molecular weight. The 1H NMR and MALDI-TOF investigations demonstrated that the PCLs were linear features capped with a methoxy group or CH2SiMe3 or cyclic structure that varied with the molar ratio of [ε-CL]/Fe.

Sequestration of Ruthenium Residues via Efficient Fluorous-enyne Termination

The creation of polymers without metal contamination remains a significant challenge for metathesis-based polymerization techniques and has complicated applications in biomedical and electronic applications. This communication reports a new approach for the removal of ruthenium byproducts through the design of an enyne terminator for metathesis polymerization that contains a fluorous tag. Upon reaction of a living polymer chain with the enyne, the ruthenium center is captured as a stable sulfur-chelated complex that can be efficiently removed after a single filtration through a fluorous cartridge. Levels of ruthenium residues as determined by ICP-MS were found to depend on the monomer structure, eluting solvent, and the degree of polymerization targeted. Ruthenium residues were minimized to low ppm levels (4-75 ppm) for most samples examined and also led to the improved thermal stability of the final materials. This represents the most efficient single method for removal of ruthenium residues from metathesis polymerization products.

Stabilization of propene molybdenum and tungsten half-sandwich complexes by intramolecular coordination of a thioether function

This study reports the stabilizing effect of an intramolecularly coordinated thioether function in propene complexes of the general formula [{η5:κS-C5H4(CH2)2SR}M(CO)2(η2-C2H3Me)][BF4] (M = Mo, W; R = Et, Ph). They are formed by protonation of allyl analogues [{η5-C5H4(CH2)2SR}M(CO)2(η3-C3H5)] by tetrafluoroboric acid in non-coordinating solvents. In contrast to analogues with unsubstituted Cp ligands, these propene complexes are isolable in a pure form and characterized by NMR spectroscopy. The molybdenum compounds are stable at low temperature and the propene ligand can easily be exchanged by thioethers or acetonitrile. Several representatives of the reaction products were characterized by X-ray structure analysis. The stabilization effect in tungsten complexes [{η5:κS-C5H4(CH2)2SR}W(CO)2(η2-C2H3Me)][BF4] (R = Et, Ph) was unusually high. The compounds are long-term stable at room temperature and do not undergo ligand exchange reactions even with strong chelators such as 1,10-phenanthroline. The molecular structure of the tungsten propene complex was confirmed by X-ray diffraction analysis on a single crystal.

Synthesis of polynorbornadienes by ring-opening metathesis polymerization and their saturated derivatives bearing various ester groups and carboxyl groups

Various symmetric and non-symmetric polynorbornadienes having a variety of ester groups and carboxyl groups were synthesized by ring-opening metathesis polymerization (ROMP) with Grubbs' third generation catalyst (G3 or [Ru]-III catalyst) in a controlled living manner from half-esters prepared by the selective monohydrolysis of symmetric diesters that we previously reported. The half-esters thus obtained can be directly submitted to ROMP with the G3 catalyst, leading to mostly the trans structure and narrow polydispersity indexes. The subsequent hydrogenation yielded saturated polymers, improving the thermostabilities according to the T ⁵ _d results. Our selective monohydrolysis reactions combined with ROMP initiated by the G3 catalyst have proven to be an efficient tool for the production of a variety of homopolymers with well-controlled structures in a living manner.

Iron-Catalyzed Olefin Metathesis: Recent Theoretical and Experimental Advances

The "metathesis reaction" is a straightforward and often metal-catalyzed chemical reaction that transforms two hydrocarbon molecules to two new hydrocarbons by exchange of molecular fragments. Alkane, alkene and alkyne metathesis have become an important tool in synthetic chemistry and have provided access to complex organic structures. Since the discovery of industrial olefin metathesis in the 1960s, many modifications have been reported; thus, increasing scope and improving reaction selectivity. Olefin metathesis catalysts based on high-valent group six elements or Ru(IV) have been developed and improved through ligand modifications. In addition, significant effort was invested to realize olefin metathesis with a non-toxic, bio-compatible and one of the most abundant elements in the earth's crust; namely, iron. First evidences suggest that low-valent Fe(II) complexes are active in olefin metathesis. Although the latter has not been unambiguously established, this review summarizes the key advances in the field and aims to guide through the challenges.

Metal-Free Ring-Opening Metathesis Polymerization with Hydrazonium Initiators

The ring-opening metathesis polymerization (ROMP) of cyclopropenes using hydrazonium initiators is described. The initiators, which are formed by the condensation of 2,3-diazabicyclo[2.2.2]octane and an aldehyde, polymerize cyclopropene monomers by a sequence of [3+2] cycloaddition and cycloreversion reactions. This process generates short chain polyolefins (M_n ≤9.4 kg mol^-1 ) with relatively low dispersities (Đ≤1.4). The optimized conditions showed efficiency comparable to that achieved with Grubbs' 2^nd generation catalyst for the polymerization of 3-methyl-3-phenylcyclopropene. A positive correlation between monomer to initiator ratio and degree of polymerization was revealed through NMR spectroscopy.

Review on the Use of Heavy Metal Deposits from Water Treatment Waste towards Catalytic Chemical Syntheses

The toxicity and persistence of heavy metals has become a serious problem for humans. These heavy metals accumulate mainly in wastewater from various industries' discharged effluents. The recent trends in research are now focused not only on the removal efficiency of toxic metal particles, but also on their effective reuse as catalysts. This review discusses the types of heavy metals obtained from wastewater and their recovery through commonly practiced physico-chemical pathways. In addition, it covers the advantages of the new system for capturing heavy metals from wastewater, as compared to older conventional technologies. The discussion also includes the various structural aspects of trapping systems and their hypothesized mechanistic approaches to immobilization and further rejuvenation of catalysts. Finally, it concludes with the challenges and future prospects of this research to help protect the ecosystem.

Predictive Catalysis in Olefin Metathesis with Ru-based Catalysts with Annulated C60 Fullerenes in the N-heterocyclic Carbenes

Predictive catalysis must be the tool that does not replace experiments, but acts as a selective agent, so that synthetic strategies of maximum profitability are used in the laboratory in a surgical way. Here, nanotechnology has been used in olefin metathesis from homogeneous Ru-NHC catalysts, specifically annulating a C₆₀ fullerene to the NHC ligand. Based on results with the C₆₀ in the backbone, a sterile change with respect to the catalysis of the metal center, an attempt has been made to bring C₆₀ closer to the metal, by attaching it to one of the two C-N bonds of the imidazole group of the SIMes (1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene) ligand (reference NHC ligand of the 2^nd generation Grubbs catalysts) to increase the steric pressure of C₆₀ in the first sphere of reactivity of the metal. The DFT calculated thermodynamics and the kinetics of SIMes-derived systems show that they are efficient catalysts for olefin metathesis.

Selective Transformation of Norbornadiene into Functionalized Azaheterocycles and β-Amino Esters with Stereo- and Regiocontrol

Novel functionalized azaheterocycles with multiple chiral centers have been accessed from readily available norbornene β-amino acids or β-lactams across a stereocontrolled synthetic route, based on ring-opening metathesis (ROM) of the staring unsaturated bicyclic amino esters, followed by selective cyclization through ring-closing metathesis (RCM). The RCM transformations have been studied under various experimental conditions to assess the scope of conversion, catalyst, yield, and substrate influence. The structure of the starting norbornene β-amino acids predetermined the structure of the new azaheterocycles, and the developed synthetic route took place with the conservation of the configuration of the chiral centers.

Olefin Metathesis by First-Row Transition Metals

Catalytic olefin metathesis based on the second- and third-row transition metals has become one of the most powerful transformations in modern organic chemistry. The shift to first-row metals to produce fine and commodity chemicals would be an important achievement to complement existing methods with inexpensive and greener alternatives. In addition, those systems can offer unusual reactivity based on the unique electronic structure of the base metals. In this Minireview, we summarize the progress of the development of alkylidenes and metallacycles of first-row transition metals from scandium to nickel capable of performing cycloaddition and cycloreversion steps, crucial reactions in olefin metathesis. In addition, we will discuss systems capable of performing olefin metathesis; however, the nature of active species is not yet known.

Stereoselective Diels-Alder Reactions of gem-Diborylalkenes: Toward the Synthesis of gem-Diboron-Based Polymers

Although gem-diborylalkenes are known to be among the most valuable reagents in modern organic synthesis, providing a rapid access to a wide array of transformations, including the construction of C-C and C-heteroatom bonds, their use as dienophile-reactive groups has been rare. Herein we report the Diels-Alder (DA) reaction of (unsymmetrical) gem-diborylalkenes. These reactions provide a general and efficient method for the stereoselective conversion of gem-diborylalkenes to rapidly access 1,1-bisborylcyclohexenes. Using the same DA reaction manifold with borylated-dienes and gem-diborylalkenes, we also developed a concise, highly regioselective synthesis of 1,1,2-tris- and 1,1,3,4-tetrakis(boronates)cyclohexenes, a family of compounds that currently lack efficient synthetic access. Furthermore, DFT calculations provided insight into the underlying factors that control the chemo-, regio-, and stereoselectivity of these DA reactions. This method also provides stereodivergent syntheses of gem-diborylnorbornenes. The utility of the gem-diborylnorbornene building blocks was demonstrated by ring-opening metathesis polymerization (ROMP), providing a highly modular approach to the first synthesis of the gem-diboron-based polymers. Additionally, these polymers have been successfully submitted to postpolymerization modification reactions. Given its simplicity and versatility, we believe that this novel DA and ROMP approach holds great promise for organoboron synthesis as well as organoboron-based polymers and that it will result in more novel transformations in both academic and industrial research.