Hypsochromic Shift of Multiple-Resonance-Induced Thermally Activated Delayed Fluorescence by Oxygen Atom Incorporation

Donor-modified asymmetric N/B/O multi-resonance TADF emitters for high-performance deep-blue OLEDs with the BT.2020 color gamut

Multi-resonance thermally activated delayed fluorescence (MR-TADF) materials of polycyclic heteroaromatics are attractive narrowband emitters in wide-color-gamut organic light-emitting diodes (OLEDs). However, deep-blue MR-TADF emitters with CIE coordinates fulfilling the BT.2020 standard and high efficiency still remain a significant challenge. Herein, two novel emitters NBO-mSAF and NBO-pSAF were developed by incorporating an electron donor, 10H-spiro[acridine-9,9'-fluorene] (SAF), at the para-position of the oxygen atom and the para-position of the boron atom in the nitrogen/boron/oxygen (N/B/O) ternary doped asymmetric MR skeleton. With appropriate electron-donating capacity and rigid spiro-structure, SAF was selected as the donor so that the long-range charge transfer triplet state (3LRCT) is induced to accelerate the reverse intersystem crossing (RISC) process, while the 1LRCT aligns higher than the short-range CT state (1SRCT) of the N/B/O core to retain the MR characters. As a result, these optimized emitters exhibit deep-blue TADF with narrow spectra and a high RISC rate constant of 3.4 × 105 s-1. In hyperfluorescence OLEDs with a TADF emitter DMAC-DPS as the sensitizer and PPF as the host, NBO-mSAF and NBO-pSAF achieved maximum external quantum efficiencies (EQEmax) of 26.7% and 25.2%. Interestingly, improved performance was realized in a traditional device configuration with a single bipolar host 26DCzPPy but without any sensitizer, where NBO-mSAF realized a higher EQEmax of 29.5% and CIE (0.128, 0.114), and NBO-pSAF exhibited an EQEmax of 20.5% and CIE of (0.147, 0.048). Narrow full width at half maximum (FWHM) values of 26-28 nm were achieved in both devices. Among all the deep-blue N/B/O type MR-TADF emitters with CIEx ≤ 0.15 and CIEy ≤ 0.12 ever reported so far, NBO-mSAF exhibited a highest EQEmax of 29.5%, which is even higher than those obtained with sensitizers, while the CIEy = 0.048 of the NBO-pSAF device is close to the standard blue (0.046) according to BT.2020, with a decent EQE of 20%.

Design of Thermally Activated Delayed Fluorescence Materials: Transition from Carbonyl to Amide-Based Acceptor

Benzophenone skeletons containing a carbonyl unit (O=C) have been widely used as electron acceptors in the thermally activated delayed fluorescence (TADF) materials. Herein, we present a novel molecular design concept for TADF materials by transitioning from a carbonyl to an amide (O=C-N) skeleton as the acceptor. The amide unit, compared to its carbonyl counterpart, offers a more stable electronic configuration. Leveraging this insight, we have developed a series of high-performance TADF molecules based on benzoyl carbazole and carbazoline acceptors. These molecules exhibit exceptionally small singlet-triplet energy gaps and pronounced aggregation-enhanced emission properties, achieving photoluminescence quantum yields in neat films as high as 99 %. Consequently, these materials serve as efficient emitters in non-doped organic light-eimtting diodes (OLEDs), reaching a maximum quantum efficiency (EQEmax) of up to 26.0 %, significantly higher than the 17.0 % obtained with benzophenone acceptor-based TADF molecules. Additionally, they have been used as TADF hosts in narrowband red fluorescent OLEDs, setting a record-high EQEmax of 22.4 %.

π-Extension of a Multiple Resonance Core: Double Helical and Heptagon-Embedded Nanographenes

Multiple resonance (MR) boron-nitrogen doped polycyclic aromatic hydrocarbons (BN-PAHs) have shown compelling thermally activated delayed fluorescence (TADF), surpassing those of their hydrocarbon analogues. However, the structural variety of π-extended BN-PAHs remains narrow. In this study, we synthesized three double helical BN-doped nanographenes (BN-NGs), 2 a-2 c, and three heptagon-embedded BN-NGs, 1 a-1 c, by π-extension of the MR core. During the formation of 2 a, a nanographene with one heptagon (1 a) was obtained, whereas further dehydrocyclization of the [6]helicene units within 2 b and 2 c led to heptagon structures, yielding other two BN-NGs containing double heptagons (1 b and 1 c). These BN-NGs (2 a-2 c and 1 a-1 c) showed pronounced redshifts of 100-190 nm compared to the parent MR core, while preserving the TADF characteristics and prolonging the delayed fluorescence lifetime to the millisecond level. Furthermore, the integration of a heptagon ring into 1 a-1 c expanded the conjugation, reduced the oxidation potentials, and yielded a more flexible framework compared to those of 2 a-2 c. The enantiomers of 2 a-2 c, 1 a, and 1 c were resolved and their chiroptical properties were studied. Notably, 1 a and 1 c exhibited increased chiroptical dissymmetry factors.

Nitrogen-Embedding Strategy for Short-Range Charge Transfer Excited States and Efficient Narrowband Deep-Blue Organic Light Emitting Diodes

The development of deep-blue organic light-emitting diodes (OLEDs) featuring high efficiency and narrowband emission is of great importance for ultrahigh-definition displays with wide color gamut. Herein, based on the nitrogen-embedding strategy for modifying the short range charge transfer excited state energies of multi-resonance (MR) thermally activated delayed fluorescence (TADF) emitters, we introduce one or two nitrogen atoms into the central benzene ring of a versatile boron-embedded 1,3-bis(carbazol-9-yl)benzene skeleton. This approach resulted in the stabilization of the highest occupied molecular orbital energy levels and the formation of intramolecular hydrogen bonds, and thus systematic hypsochromic shifts and narrowing spectra. In toluene solution, two heterocyclic-based MR-TADF molecules, Py-BN and Pm-BN, exhibit deep-blue emissions with high photoluminescence quantum yields of 93 % and 94 %, and narrow full width at half maximum of 14 and 13 nm, respectively. A deep-blue hyperfluorescent OLED based on Py-BN exhibited a maximum external quantum efficiency of 27.7 % and desired color purity with Commission Internationale de L'Eclairage (CIE) coordinates of (0.150, 0.052). These results demonstrate the significant potential for the development of deep blue narrowband MR-TADF emitters.

Theoretical uncovering of the chalcogen element regulated ESDPT behaviors for 2,5-bis(2-benzoxazolyl)-hydroquinone derivatives

Inspired by the captivating allure of exquisitely regulated characteristics exhibited by 2-(2-hydroxyphenyl)-benzoxazole and its derivatives in the realms of photochemistry and photophysics, our current endeavor primarily revolves around delving into the intricacies of photo-induced excited state reactions for derivatives of 2,5-bis(2-benzoxazolyl)-hydroquinone (BBHQ). Given the significant impact of chalcogen element doping, herein we predominantly focus on exploring the excited state behaviors of BBHQ-OO, BBHQ-SS, and BBHQ-SeSe fluorophores. Our simulations, resulting from variations in geometry and vertical excitation charge reorganization, reveal atomic-electronegativity-dependent hydrogen bonding interactions and charge recombination induced by photoexcitation that can significantly enhance the excited state intramolecular double proton transfer (ESDPT) reaction for BBHQ-OO, BBHQ-SS, and BBHQ-SeSe fluorophores. By constructing potential energy surfaces (PESs) and identifying transition states (TS), we unveil the ultrafast stepwise ESDPT mechanism due to the low potential barriers. Additionally, by employing heterosubstituted BBHQ-OS and BBHQ-OSe compounds, we rigorously validate the stepwise ESDPT mechanism regulated by chalcogen atomic electronegativity. We sincerely anticipate that the modulation of solvent polarity on excited state behaviors will pave the way for groundbreaking advancements in luminescent materials.

Elevating the upconversion performance of a multiple resonance thermally activated delayed fluorescence emitter via an embedded azepine approach

Multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters hold promise for efficient organic light-emitting diodes (OLEDs) and wide gamut displays. An azepine donor is introduced into the boron-nitrogen system for the first time. The highly twisted conformation of a seven-ring embedded new molecule, TAzBN, increases the intermolecular distances, suppressing self-aggregation emission quenching. Meanwhile, the azepine donor is crucial to achieve a narrow singlet-triplet gap (0.03 eV) as well as boost the reverse intersystem crossing (RISC) rate to 8.50 × 105 s-1. It is noteworthy that TAzBN demonstrates an impressive photoluminescence quantum yield of 94%. In addition, its nonsensitized OLED displayed a remarkable external quantum efficiency (EQEmax) with values peaking at 27.3%, and an EQE of 21.4% at 500 cd m-2. This finding shows that when TAzBN is used at a high concentration of 10 wt%, its device maintains efficiency even at higher brightness levels, highlighting TAzBN's resistance to aggregation quenching. Furthermore, TAzBN enantiomers showed circularly polarized photoluminescence characteristics with dissymmetry factors |g PL| of up to 1.07 × 10-3 in doped films. The curved heptagonal geometry opens an avenue to design the MR-TADF emitters with fast spin-flip and chiroptical properties.

Stepwise Toward Pure Blue Organic Light-Emitting Diodes by Synergetically Locking and Shielding Carbonyl/Nitrogen-Based MR-TADF Emitters

Deep-blue multi-resonance (MR) emitters with stable and narrow full-width-at-half-maximum (FWHM) are of great importance for widening the color gamut of organic light-emitting diodes (OLEDs). However, most planar MR emitters are vulnerable to intermolecular interactions from both the host and guest, causing spectral broadening and exciton quenching in thin films. Their emission in the solid state is environmentally sensitive, and the color purity is often inferior to that in solutions. Herein, a molecular design strategy is presented that simultaneously narrows the FWHM and suppresses intermolecular interactions by combining intramolecular locking and peripheral shielding within a carbonyl/nitrogen-based MR core. Intramolecularly locking carbonyl/nitrogen-based bears narrower emission of 2,10-dimethyl-12,12-diphenyl-4H-benzo[9,1]quinolizino[3,4,5,6,7-defg]acridine-4,8(12H)-dione in solution and further with peripheral-shielding groups, deep-blue emitter (12,12-diphenyl-2,10-bis(9-phenyl-9H-fluoren-9-yl)-4H-benzo[9,1]quinolizino[3,4,5,6,7-defg]acridine-4,8(12H)-dione, DPQAO-F) exhibits ultra-pure emission with narrow FWHM (c.a., 24 nm) with minimal variations (∆FWHM ≤ 3 nm) from solution to thin films over a wide doping range. An OLED based on DPQAO-F presents a maximum external quantum efficiency (EQEmax) of 19.9% and color index of (0.134, 0.118). Furthermore, the hyper-device of DPQAO-F exhibits a record-high EQEmax of 32.7% in the deep-blue region, representing the first example of carbonyl/nitrogen-based OLED that can concurrently achieve narrow bandwidth in the deep-blue region and a high electroluminescent efficiency surpassing 30%.

Efficient Deep-Blue Multiple-Resonance Emitters Based on Azepine-Decorated ν-DABNA for CIEy below 0.06

Ultrapure deep-blue emitters are in high demand for organic light-emitting diodes (OLEDs). Although color coordinates serve as straightforward parameters for assessing color purity, precise control over the maximum wavelength and full-width at half-maximum is necessary to optimize OLED performance, including luminance efficiency and luminous efficacy. Multiple-resonance (MR) emitters are promising candidates for achieving ideal luminescence properties; consequently, a wide variety of MR frameworks have been developed. However, most of these emitters experience a wavelength displacement from the ideal color, which limits their practical applicability. Therefore, a molecular design that is compatible with MR emitters for modulating their energy levels and color output is particularly valuable. Here, it is demonstrated that the azepine donor unit induces an appropriate blue-shift in the emission maximum while maintaining efficient MR characteristics, including high photoluminescence quantum yield, narrow emission, and a fast reverse intersystem crossing rate. OLEDs using newly developed MR emitters based on the ν-DABNA framework simultaneously exhibit a high quantum efficiency of ≈30%, luminous efficacy of ≈20 lm W-1, exceptional color purity with Commission Internationale de l'Éclairage coordinates as low as (0.14, 0.06), and notably high operational stability. These results demonstrate unprecedentedly high levels compared with those observed in previously reported deep-blue emitters.

Quantitative prediction of rate constants and its application to organic emitters

Many phenomena in nature consist of multiple elementary processes. If we can predict all the rate constants of respective processes quantitatively, we can comprehensively predict and understand various phenomena. Here, we report that it is possible to quantitatively predict all related rate constants and quantum yields without conducting experiments, using multiple-resonance thermally activated delayed fluorescence (MR-TADF) as an example. MR-TADFs are excellent emitters because of its narrow emission, high luminescence efficiency, and chemical stability, but they have one drawback: slow reverse intersystem crossing (RISC), leading to efficiency roll-off and reduced device lifetime. Here, we show a quantum chemical calculation method for quantitatively obtaining all the rate constants and quantum yields. This study reveals a strategy to improve RISC without compromising other important factors: radiative decay rate constants, photoluminescence quantum yields, and emission linewidths. Our method can be applied in a wide range of research fields, providing comprehensive understanding of the mechanism including the time evolution of excitons.

Accelerating Intersystem Crossing in Multiresonance Thermally Activated Delayed Fluorescence Emitters via Long-Range Charge Transfer

Multiresonance thermally activated delayed fluorescence (MR-TADF) emitters are excellent candidates for high-performance organic light-emitting diodes (OLEDs) due to their narrowband emission properties. However, the inherent mechanism of regulating the rate of intersystem crossing (ISC) is ambiguous in certain MR-TADF skeletons. Herein, we propose a mechanism of accelerating ISC in B/S-based MR-TADF emitters by peripheral modifications of electron-donating groups (EDGs) without affecting the narrowband emission property. The long-range charge transfer (LRCT) stems from the introduced EDG leading to high-lying singlet and triplet excited states. The ISC process is accelerated by the enhanced spin-orbital coupling (SOC) between the singlet short-range charge transfer (SRCT) and triplet LRCT manifolds. Meanwhile, the narrowband emission derived from the MR-type SRCT state is well retained as expected in the peripherally modified MR-TADF emitters. This work reveals the regulation mechanism of photophysical properties by high-lying LRCT excited states and provides a significant theoretical basis for modulating the rate of ISC in the further design of MR-TADF materials.

Precision-Engineered Medium-Sized Molecular Host and Emitter for Ensuring Consistent Performance in Solution-Processed Narrowband OLEDs

In this study, two novel multiple resonance (MR) emitters, DtCzBN and Cy-DtCzBN, were designed based on the well-known BCzBN structure and synthesized for narrowband solution-processed organic light-emitting diodes (OLEDs). Cy-DtCzBN possesses a dimeric V-shaped structure formed by coupling two individual DtCzBN units via a nonconjugated cyclohexane linker. When compared with DtCzBN, Cy-DtCzBN, as a medium-sized molecule, was found to maintain the optical and photophysical properties of the corresponding monomeric unit, DtCzBN, but exhibits high thermal stability, excellent solubility, and good film-forming ability. Additionally, solution-processed OLEDs were fabricated by using two sets of molecules: one set of small molecular hosts and emitters (i.e., mCP and DtCzBN) and the other set of medium-sized molecular hosts and emitters (i.e., Cy-mCP and Cy-DtCzBN). Notably, devices using medium-sized molecular hosts and emitters exhibited similar optical and photophysical properties but showed significantly improved reproducibility and thermal stability compared with those based on small molecular hosts and emitters. Our current study provides some insights into molecular design strategies for thermally stable hosts and emitters, which are highly suitable for solution-processed OLEDs.

Highly efficient multi-resonance thermally activated delayed fluorescence material toward a BT.2020 deep-blue emitter

An ultrapure deep-blue multi-resonance-induced thermally activated delayed fluorescence material (DOB2-DABNA-A) is designed and synthesized. Benefiting from a fully resonating extended helical π-conjugated system, this compound has a small ΔEST value of 3.6 meV and sufficient spin-orbit coupling to exhibit a high-rate constant for reverse intersystem crossing (kRISC = 1.1 × 106 s-1). Furthermore, an organic light-emitting diode employing DOB2-DABNA-A as an emitter is fabricated; it exhibits ultrapure deep-blue emission at 452 nm with a small full width at half maximum of 24 nm, corresponding to Commission Internationale de l'Éclairage (CIE) coordinates of (0.145, 0.049). The high kRISC value reduces the efficiency roll-off, resulting in a high external quantum efficiency (EQE) of 21.6% at 1000 cd m-2.

Suppression of Dexter transfer by covalent encapsulation for efficient matrix-free narrowband deep blue hyperfluorescent OLEDs

Hyperfluorescence shows great promise for the next generation of commercially feasible blue organic light-emitting diodes, for which eliminating the Dexter transfer to terminal emitter triplet states is key to efficiency and stability. Current devices rely on high-gap matrices to prevent Dexter transfer, which unfortunately leads to overly complex devices from a fabrication standpoint. Here we introduce a molecular design where ultranarrowband blue emitters are covalently encapsulated by insulating alkylene straps. Organic light-emitting diodes with simple emissive layers consisting of pristine thermally activated delayed fluorescence hosts doped with encapsulated terminal emitters exhibit negligible external quantum efficiency drops compared with non-doped devices, enabling a maximum external quantum efficiency of 21.5%. To explain the high efficiency in the absence of high-gap matrices, we turn to transient absorption spectroscopy. It is directly observed that Dexter transfer from a pristine thermally activated delayed fluorescence sensitizer host can be substantially reduced by an encapsulated terminal emitter, opening the door to highly efficient 'matrix-free' blue hyperfluorescence.

pH-dependent complex formation with TAR RNA and DNA: application towards logic gates

Nucleic acid-based logic gates have shown great potential in biotechnology, medicine as well as diagnostics. Herein, we have constructed pH-responsive logic devices by utilizing HIV-1 TAR hairpins in combination with a thiazole peptide that exhibits turn-on fluorescence upon interacting with TAR RNA or DNA. Based on this, INHIBIT-AND and YES-INHIBIT-AND logic gates were constructed in parallel. The pH alteration leads to conformational changes of the hairpin structure, enabling the construction of a multi-reset reusable logic system which could be developed for in vitro sensing of the HIV-1 viral RNA.

A figure of merit for efficiency roll-off in TADF-based organic LEDs

Organic light-emitting diodes (OLEDs) are a revolutionary light-emitting display technology that has been successfully commercialized in mobile phones and televisions1,2. The injected charges form both singlet and triplet excitons, and for high efficiency it is important to enable triplets as well as singlets to emit light. At present, materials that harvest triplets by thermally activated delayed fluorescence (TADF) are a very active field of research as an alternative to phosphorescent emitters that usually use heavy metal atoms3,4. Although excellent progress has been made, in most TADF OLEDs there is a severe decrease of efficiency as the drive current is increased, known as efficiency roll-off. So far, much of the literature suggests that efficiency roll-off should be reduced by minimizing the energy difference between singlet and triplet excited states (ΔEST) to maximize the rate of conversion of triplets to singlets by means of reverse intersystem crossing (kRISC)5-20. We analyse the efficiency roll-off in a wide range of TADF OLEDs and find that neither of these parameters fully accounts for the reported efficiency roll-off. By considering the dynamic equilibrium between singlets and triplets in TADF materials, we propose a figure of merit for materials design to reduce efficiency roll-off and discuss its correlation with reported data of TADF OLEDs. Our new figure of merit will guide the design and development of TADF materials that can reduce efficiency roll-off. It will help improve the efficiency of TADF OLEDs at realistic display operating conditions and expand the use of TADF materials to applications that require high brightness, such as lighting, augmented reality and lasing.

Regulated stepwise ESDPT mechanism associated with chalcogen substitutions in BDIBD derivatives

Inspired by the brilliant photochemical and photophysical properties of organic molecules containing chalcogenide substitutions that could be potentially applied across various disciplines, in this work, the effects of the atomic electronegativity of chalcogens (O, S, and Se) on hydrogen bond interactions and excited state proton transfer (ESPT) are mainly focused. We present characteristic oxygen-hydroxybenzazole-substituted 2,5-bis(4,5-diphenyl-1H-imidazol-2-yl)benzene-1,4-diol (BDIBD) derivatives that contain intramolecular double hydrogen bonds. The main objective of this study was to explore in detail the influence of the change of chalcogen atomic electronegativity on dual hydrogen bond interaction and ESPT behavior. By comparing the structural changes and infrared (IR) vibrational spectra of BDIBD derivative (BDIBD-O, BDIBD-S and BDIBD-Se) fluorophores in S0 and S1 states, combined with the preliminary detection of hydrogen bond interaction via the core-valence bifurcation (CVB) index and predicted hydrogen bonding energy (EHB), we conclude that dual hydrogen bonds should be strengthened in the S1 state, which is favorable for the occurrence of ESPT reactions. The charge recombination behavior of hydrogen bonds, induced by photoexcitation, further illustrates this point. By constructing potential energy surfaces (PESs) based on restrictive optimization and by searching the transition state (TS) structure, we finally elucidate stepwise excited-state double proton transfer (ESDPT). Specifically, we confirm that a change in atomic electronegativity has a regulatory effect on the ESDPT behavior in BDIBD derivatives, that is, lower atomic electronegativity is more conducive to stepwise ESDPT.

Organoboron-based multiple-resonance emitters: synthesis, structure-property correlations, and prospects

Boron-based multiple-resonance (MR) emitters exhibit the advantages of narrowband emission, high absolute photoluminescence quantum yield, thermally activated delayed fluorescence (TADF), and sufficient stability during the operation of organic light-emitting diodes (OLEDs). Thus, such MR emitters have been widely applied as blue emitters in triplet-triplet-annihilation-driven fluorescent devices used in smartphones and televisions. Moreover, they hold great promise as TADF or terminal emitters in TADF-assisted fluorescence or phosphor-sensitised fluorescent OLEDs. Herein we comprehensively review organoboron-based MR emitters based on their synthetic strategies, clarify structure-photophysical property correlations, and provide design guidelines and future development prospects.

The Blue Problem: OLED Stability and Degradation Mechanisms

OLED technology has revolutionized the display industry and is promising for lighting. Despite its maturity, there remain outstanding device and materials challenges to address. Particularly, achieving stable and highly efficient blue OLEDs is still proving to be difficult; the vast array of degradation mechanisms at play, coupled with the precise balance of device parameters needed for blue high-performance OLEDs, creates a unique set of challenges in the quest for a suitably stable yet high-performance device. Here, we discuss recent progress in the understanding of device degradation pathways and provide an overview of possible strategies to increase device lifetimes without a significant efficiency trade-off. Only careful consideration of all variables that go into OLED development, from the choice of materials to a deep understanding of which degradation mechanisms need to be suppressed for the particular structure, can lead to a meaningful positive change toward commercializable blue devices.

Recent progress in multi-resonance thermally activated delayed fluorescence emitters with an efficient reverse intersystem crossing process

Multi-resonance thermally activated delayed fluorescence (MR-TADF) emitters have become an active research topic at the forefront of organic light-emitting diodes (OLEDs) owing to their excellent photophysical properties such as high efficiency and narrow emission characteristics. However, MR-TADF materials always exhibit slow reverse intersystem crossing rates (kRISC) due to the large energy gap and small spin-orbit coupling values between singlet and triplet excited states. In order to optimize the RISC process, strategies such as heavy-atom-integration, metal perturbation, π-conjugation extension and peripheral decoration of donor/acceptor units have been proposed to construct efficient MR-TADF materials for high-performance OLEDs. This article provides an overview of the recent progress in MR-TADF emitters with an efficient RISC process, focusing on the structure-activity relationship between the molecular structure, optoelectronic feature, and OLED performance. Finally, the potential challenges and future prospects of MR-TADF materials are discussed to gain a more comprehensive understanding of the opportunities for efficient narrowband OLEDs.

Double charge transfer processes enable a green multiple resonance-induced thermally activated delayed fluorescence emitter for an efficient narrowband OLED

Benefitting from short-range charge transfer (SR-CT) and through-space charge transfer (TSCT) effects, an efficient green narrowband emitter, BNDCN, was developed. Owing to the synergistic effect of double CT processes, a BNDCN-based organic light-emitting diode showed a high external quantum efficiency of 32.3%.

Carbazole-Decorated Organoboron Emitters with Low-Lying HOMO Levels for Solution-Processed Narrowband Blue Hyperfluorescence OLED Devices

The hyperfluorescence has drawn great attention in achieving efficient narrowband emitting devices based on multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters. However, achieving efficient solution-processed pure blue hyperfluorescence devices is still a challenge, due to the unbalanced charge transport and serious exciton quenching caused by that the holes are easily trapped on the high-lying HOMO (the highest occupied molecular orbital) level of traditional diphenylamine-decorated emitters. Here, we developed two narrowband blue organoboron emitters with low-lying HOMO levels by decorating the MR-TADF core with weakly electron-donating carbazoles, which could suppress the hole trapping effect by reducing the hole traps between host and MR-TADF emitter from deep (0.40 eV) to shallow (0.14/0.20 eV) ones for facilitating hole transport and exciton formation, as well as avoiding exciton quenching. And the large dihedral angle between the carbazole and MR-TADF core makes the carbazole act as a steric hindrance to inhibit molecular aggregation. Accordingly, the optimized solution-processed pure blue hyperfluorescence devices simultaneously realize record external quantum efficiency of 29.2 %, narrowband emission with a full-width at half-maximum of 16.6 nm, and pure blue color with CIE coordinates of (0.139, 0.189), which is the best result for the solution-processed organic light-emitting diodes based on MR-TADF emitters.

B-N/B-O Contained Heterocycles as Fusion Locker in Multi-Resonance Frameworks towards Highly-efficient and Stable Ultra-Narrowband Emission

Fusing condensed aromatics into multi-resonance (MR) frameworks has been an exquisite strategy to modulate the optoelectronic properties, which, however, always sacrifices the small full width at half maxima (FWHM). Herein, we strategically embed B-N/B-O contained heterocycles as fusion locker into classical MR prototypes, which could enlarge the π-extension and alleviate the steric repulsion for an enhanced planar skeleton to suppress the high-frequency stretching/ scissoring vibrations for ultra-narrowband emissions. Sky-blue emitters with extremely small FWHMs of 17-18 nm are thereafter obtained for the targeted emitters, decreased by (1.4-1.9)-fold compared with the prototypes. Benefiting from their high photoluminescence quantum yields of >90 % and fast radiative decay rates of >108  s-1 , one of those emitters shows a high maximum external quantum efficiency of 31.9 % in sensitized devices, which remains 25.8 % at a practical luminance of 1,000 cd m-2 with a small FWHM of merely 19 nm. Notably a long operation half-lifetime of 1,278 h is also recorded for the same device, representing one of the longest lifetimes among sky-blue devices based on MR emitters.

Naphthalene-Embedded Multi-Resonance Emitters Enabling Efficient Narrow Emissive Blue OLEDs

Great achievements have been made in the development of organic light-emitting diodes in recent decades. However, achieving high color purity for blue emitters remains a challenge. In this study, we have designed and synthesized three naphthalene (NA)-embedded multi-resonance (MR) emitters, named SNA, SNB and SNB1, based on N-B-O frameworks with isomer variations for finely adjusting the photophysical properties. These emitters show tunable blue emission with emission peaks of 450-470 nm. Small full width of half maximum (FWHM) of 25-29 nm are achieved in these emitters, indicating the well maintaining of molecular rigidity and MR effect with NA extension. Such design also ensures a fast radiative decay. However, no obvious delayed fluorescence is observed in all three emitters due to the relatively large energy differences between the first singlet and triplet excited states. Both SNA and SNB enable high electroluminescent (EL) performance in doped devices with external quantum efficiency (EQE) of 7.2 and 7.9 %, respectively. When applying the sensitized strategy, devices based on SNA and SNB show huge improvement with EQE of 29.3 and 29.1 %. More importantly, SNB with twist geometry enables stable EL spectra with almost unchanged FWHM under different doping concentrations. This work demonstrates the potential of NA extension design in constructing narrowband emissive blue emitters.

Neoteric Advances in Oxygen Bridged Triaryl Boron-based Delayed Fluorescent Materials for Organic Light Emitting Diodes

Since their first demonstration, thermally activated delayed fluorescence (TADF) materials have been emerged as the most promising emitters because of their promising applications in optoelectronics, typified by organic light-emitting diodes (OLEDs). In which, the rigid oxygen bridged boron acceptor-featured (DOBNA) emitters have gained tremendous impetus for OLEDs, which is ascribed to their excellent external quantum efficiency (EQE). However, these materials often displayed severe efficiency roll-off and poor operational stability. Therefore, there needs to be a comprehensive understanding of the aspect of the molecular design and structure-property relationship. To the best of our knowledge, there is no detailed review on the structure-function outlook of DOBNA-based emitters emphasizing the effect of the nature of donor units, their number density, and substitution pattern on the physicochemical properties, excited state dynamics and OLED performance were reported. To fill this gap, herein we presented the recent advancements in DOBNA-based acceptor featured TADF materials by classifying them into several subgroups based on the molecular design i. e. donor-acceptor (D-A), D-A-D, A-D-A, and multi-resonant TADF (MR-TADF) emitters. The detailed design concepts, along with their respective physicochemical and OLED performances were summarized. Finally, the prospective of this class of materials in forthcoming OLED displays is also discussed.

Integrating the atomically separated frontier molecular orbital distribution of two multiple resonance frameworks through a single bond for high-efficiency narrowband emission

Atomically separated frontier molecular orbital (FMO) distribution plays a crucial role in achieving narrowband emissions for multiple resonance (MR)-type thermally activated delayed fluorescence emitters. Directly peripherally decorating a MR framework with donor or acceptor groups is a common strategy for developing MR emitters. However, this approach always induces bonding features and thus spectral broadening as a side effect. How direct donor/acceptor decoration enhances atomic FMO separation while avoiding bonding features has not been explored. For this aim, two MR derivatives are synthesized by integrating two MR frameworks at different sites. Following resonance alignment, DOBNA-m-CzBN avoids breaking nonbonding FMO features at the single connecting bond and shows enhanced MR characteristics, with a sharp emission at 491 nm and a full width at half maximum (FWHM) of 24 nm/118 meV. Conversely, DOBNA-p-CzBN emerges as a bonding feature due to its continuous π-conjugation extension, with a broadened FWHM of 26 nm/132 meV peaking at 497 nm. Impressively, both emitters exhibit outstanding external quantum efficiencies of 37.8-38.6% in organic light-emitting diodes (OLEDs), demonstrating improved performance with rigid acceptor decoration. Distinctly, the electroluminescence of DOBNA-m-CzBN shows a narrower FWHM than that of DOBNA-p-CzBN. This work for the first time reports the enhancement of atomic FMO separation for MR emitters via peripheral decoration through a single bond and provides a more comprehensive illustration for further development of MR emitters.

RGB Thermally Activated Delayed Fluorescence Emitters for Organic Light-Emitting Diodes toward Realizing the BT.2020 Standard

With the surging demand for ultra-high-resolution displays, the International Telecommunication Union (ITU) announce the next-generation color gamut standard, named ITU-R Recommendation BT.2020, which not only sets a seductive but challenging milestone for display technologies but also urges researchers to recognize the importance of color coordinates. Organic light-emitting diodes (OLEDs) are an important display technology in current daily life, but they face challenges in approaching the BT.2020 standard. Thermally activated delayed fluorescence (TADF) emitters have bright prospects in OLEDs because they possess 100% theoretical exciton utilization. Thus, the development of TADF emitters emitting primary red (R), green (R), and blue (B) emission is of great significance. Here, a comprehensive overview of the latest advancements in TADF emitters that exhibit Commission Internationale de l'Éclairage (CIE) coordinates surpassing the National Television System Committee (NTSC) and approaching BT.2020 standards is presented. Rational strategies for molecular designs, as well as the resulting photophysical properties and OLED performances, are discussed to elucidate the underlying mechanisms for shifting the CIE coordinates of both donor-acceptor and multiple resonance (MR) typed TADF emitters toward the BT.2020 standard. Finally, the challenges in realization of the wide-color-gamut BT.2020 standard and the prospects for this research area are provided.

High-performance blue OLED using multiresonance thermally activated delayed fluorescence host materials containing silicon atoms

We report three highly efficient multiresonance thermally activated delayed fluorescence blue-emitter host materials that include 5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracene (DOBNA) and tetraphenylsilyl groups. The host materials doped with the conventional N7,N7,N13,N13,5,9,11,15-octaphenyl-5,9,11,15-tetrahydro-5,9,11,15-tetraaza-19b,20b-diboradinaphtho[3,2,1-de:1',2',3'-jk]pentacene-7,13-diamine (ν-DABNA) blue emitter exhibit a high photoluminescence quantum yield greater than 0.82, a high horizontal orientation greater than 88%, and a short photoluminescence decay time of 0.96-1.93 μs. Among devices fabricated using six synthesized compounds, the device with (4-(2,12-di-tert-butyl-5,9-dioxa-13b-boranaphtho[3,2,1-de]anthracen-7-yl)phenyl)triphenylsilane (TDBA-Si) shows high external quantum efficiency values of 36.2/35.0/31.3% at maximum luminance/500 cd m-2/1,000 cd m-2. This high performance is attributed to fast energy transfer from the host to the dopant. Other factors possibly contributing to the high performance are a T1 excited-state contribution, inhibition of aggregation by the bulky tetraphenylsilyl groups, high horizontal orientation, and high thermal stability. We achieve a high efficiency greater than 30% and a small roll-off value of 4.9% at 1,000 cd m-2 using the TDBA-Si host material.

Color Stable Deep Blue Multi-Resonance Organic Emitters with Narrow Emission and High Efficiency

The development of highly efficient and deep blue emitters satisfying the color specification of the commercial products has been a challenging hurdle in the organic light-emitting diodes (OLEDs). Here, deep blue OLEDs with a narrow emission spectrum with good color stability and spin-vibronic coupling assisted thermally activated delayed fluorescence are reported using a novel multi-resonance (MR) emitter built on a pure organic-based molecular platform of fused indolo[3,2,1-jk]carbazole structure. Two emitters derived from 2,5,11,14-tetrakis(1,1-dimethylethyl)indolo[3,2,1-jk]indolo[1',2',3':1,7]indolo[3,2-b]carbazole (tBisICz) core are synthesized as the MR type thermally activated delayed fluorescence emitters realizing a very narrow emission spectrum with a full-width-at-half-maximum (FWHM) of 16 nm with suppressed broadening at high doping concentration. The tBisICz core is substituted with a diphenylamine or 9-phenylcarbazole blocking group to manage the intermolecular interaction for high efficiency and narrow emission. The deep blue OLEDs achieve high external quantum efficiency (EQE) of 24.9%, small FWHM of 19 nm, and deep blue color coordinate of (0.16, 0.04) with good color stability with increase in doping concentration. To the authors' knowledge, the EQE in this work is one of the highest values reported for the deep blue OLEDs that achieve the BT.2020 standard.

A Quadruple-Borylated Multiple-Resonance Emitter with para/meta Heteroatomic Patterns for Narrowband Orange-Red Emission

Hindered by spectral broadening issues with redshifted emission, long-wavelength (e.g., maxima beyond 570 nm) multiple resonance (MR) emitters with full width at half maxima (FWHMs) below 20 nm remain absent. Herein, by strategically embedding diverse boron (B)/nitrogen (N) atomic pairs into a polycyclic aromatic hydrocarbon (PAH) skeleton, we propose a hybrid pattern for the construction of a long-wavelength narrowband MR emitter. The proof-of-concept emitter B4N6-Me realized orange-red emission with an extremely small FWHM of 19 nm (energy unit: 70 meV), representing the narrowest FWHM among all reported long-wavelength MR emitters. Theoretical calculations revealed that the cooperation of the applied para B-π-N and para B-π-B/N-π-N patterns is complementary, which gives rise to both narrowband and redshift characteristics. The corresponding organic light-emitting diode (OLED) employing B4N6-Me achieved state-of-the-art performance, e.g., a narrowband orange-red emission with an FWHM of 27 nm (energy unit: 99 meV), an excellent maximum external quantum efficiency (EQE) of 35.8 %, and ultralow efficiency roll-off (EQE of 28.4 % at 1000 cd m-2 ). This work provides new insights into the further molecular design and synthesis of long-wavelength MR emitters.

Engineering the Macrocyclic Donor Structures towards Deep-Blue Thermally Activated Delayed Fluorescence Emitters

Deep-blue thermally activated delayed fluorescence (TADF) molecules present promising potential in organic light-emitting diodes (OLEDs), especially for display applications. Here, an efficient molecular engineering approach to modifying the donor or acceptor features of the D-π-A-configured TADF molecules for deep-blue emission is reported. By introducing oxygen and sulfone as a bridge unit onto the macrocyclic donor, two emitters, c-ON-MeTRZ and c-NS-MeTRZ, are synthesized and characterized, respectively. The reduced donor strength of c-ON-MeTRZ and c-NS-MeTRZ as compared to that of the model molecule c-NN-MeTRZ leads to blue-shifted emissions with high photoluminescence quantum yields (PLQYs) and retains TADF characters, while the new emitter c-NN-MePym with the most blue-shifted emission only exhibits a pure fluorescent nature because of the electron-accepting feature of pyrimidine that is insufficient for inducing the TADF property. In the presence of macrocyclic donors, these new emitters show high horizontal dipole ratios (Θ_// = 85-89%), which are beneficial for improving the light out-coupling efficiency. Deep-blue TADF OLEDs incorporating c-ON-MeTRZ as an emitter doped in the mCPCN host achieves a high maximum external quantum efficiency (EQE_max) of 30.2% together with 1931 Commission Internationale de I'Eclairage (CIE) coordinates of (0.14, 0.13), while the counter device employing c-NS-MeTRZ as a dopant gives EQE_max of 15.4% and CIE coordinates of (0.14, 0.09). The EQE_max of c-ON-MeTRZ- and c-NS-MeTRZ-based devices can be significantly improved to 34.4 and 29.3%, respectively, with a polar host DPEPO, which stabilizes the charge transfer (CT) S₁ state to give lower ΔE_ST for improving the reverse intersystem crossing process. The efficient TADF character, high PLQYs, and high anisotropic emission dipole ratios work together to render the superior electroluminescence (EL) efficiencies. Based on the detailed characterizations of physical properties, theoretical analyses, and comprehensive study on the corresponding devices, a clear structure-property-performance relationship has been successfully established to verify the effective molecular design strategy of modulating the macrocyclic donor characters for efficient deep-blue TADF emitters.

Toward highly efficient deep-blue OLEDs: Tailoring the multiresonance-induced TADF molecules for suppressed excimer formation and near-unity horizontal dipole ratio

Boron-based compounds exhibiting a multiresonance thermally activated delayed fluorescence are regarded promising as a narrowband blue emitter desired for efficient displays with wide color gamut. However, their planar nature makes them prone to concentration-induced excimer formation that broadens the emission spectrum, making it hard to increase the emitter concentration without raising CIE y coordinate. To overcome this bottleneck, we here propose o-Tol-ν-DABNA-Me, wherein sterically hindered peripheral phenyl groups are introduced to reduce intermolecular interactions, leading to excimer formation and thus making the pure narrowband emission character far less sensitive to concentration. With this approach, we demonstrate deep-blue OLEDs with y of 0.12 and full width at half maximum of 18 nm, with maximum external quantum efficiency (EQE) of ca. 33%. Adopting a hyperfluorescent architecture, the OLED performance is further enhanced to EQE of 35.4%, with mitigated efficiency roll-off, illustrating the immense potential of the proposed method for energy-efficient deep-blue OLEDs.

One-Shot Construction of BN-Embedded Heptadecacene Framework Exhibiting Ultra-narrowband Green Thermally Activated Delayed Fluorescence

BN-embedded nonacene, tridecacene, and heptadecacene frameworks were constructed using one-shot quadruple, sextuple, and octuple borylation reactions, respectively. The key to success is the judicious choice of borylating reagents and long-chain alkyl-substituted carbazolyl groups as boron-trapping groups, which suppressed the decrease in HOMO energy and insolubilization associated with borylation. Based on the product yields, each electrophilic C-H borylation proceeded in >99% yield, which is the best efficiency reported so far for C-H borylation reactions. Owing to the multiple resonance effects of boron and nitrogen, the prepared acenes exhibited ultra-narrowband green thermally activated delayed fluorescence with full-width at half-maximum of 12-16 nm; moreover, their k_RISC values were in the order of 10⁵ s^-1. We fabricated an organic light-emitting diode by employing the nonacene as an emitter, which exhibited high external quantum efficiency (EQE) of 28.7%. The device also showed a minimum efficiency roll-off with an EQE of 25.8% at 1000 cd m^-2.

Improving the stability and color purity of a BT.2020 blue multiresonance emitter by alleviating hydrogen repulsion

Stable deep blue multiresonance emitters with small full width at half maximum (FWHM) are attractive for wide color-gamut organic light-emitting diodes (OLEDs). However, the steric repulsion from the spatially close hydrogens would twist the multiresonance skeletons, causing spectral broadening and molecular instability issues. Here, we strategically introduce a mesitylboron locking unit into a carbazole-embedded multiresonance model emitter, alleviating the hydrogen repulsions and also strengthening the para-positioned weak carbon-nitrogen bond in anionic states. An emission peaking at 452 nm with an FWHM of merely 14 nm and nearly BT.2020 blue chromaticity coordinates are obtained in toluene, affording a high maximum external quantum efficiency of 33.9% in a sensitizing device. Moreover, an impressive LT97 (time to decay to 97% of the initial luminance) of 178 hours at a constant current density of 12 mA/cm² was achieved in a stable device with a small y coordinate of 0.057, nearly 20 times longer than the model emitter with even a substantially red-shifted emission.

Multiresonant TADF materials: triggering the reverse intersystem crossing to alleviate the efficiency roll-off in OLEDs

The hunt for narrow-band emissive pure organic molecules capable of harvesting both singlet and triplet excitons for light emission has garnered enormous attention to promote the advancement of organic light-emitting diodes (OLEDs). Over the past decade, organic thermally activated delayed fluorescence (TADF) materials based on donor (D)/acceptor (A) combinations have been researched for OLEDs in wide color gamut (RGB) regions. However, due to the strong intramolecular charge-transfer (CT) state, they exhibit broad emission with full-width-at-half maximum (FWHM) > 70 nm, which deviates from being detrimental to achieving high color purity for future high-end display electronics such as high-definition TVs and ultra-high-definition TVs (UHDTVs). Recently, the new development in the sub-class of TADF emitters called multi-resonant TADF (MR-TADF) emitters based on boron/nitrogen atoms has attracted much interest in ultra-high definition OLEDs. Consequently, MR-TADF emitters are appeal to their potentiality as promising candidates in fabricating the high-efficient OLEDs due to their numerous advantages such as high photoluminescence quantum yield (PLQY), unprecedented color purity, and narrow bandwidth (FWHM ≤ 40 nm). Until now many MR-TADF materials have been developed for ultra-gamut regions with different design concepts. However, most MR-TADF-OLEDs showed ruthless external quantum efficiency (EQE) roll-off characteristics at high brightness. Such EQE roll-off characteristics were derived mainly from the low reverse intersystem crossing (k_RISC) rate values. This feature article primarily focuses on the design strategies to improve k_RISC for MR-TADF materials with some supportive strategies including extending charge delocalization, heavy atom introduction, multi-donor/acceptor utilization, and a hyperfluorescence system approach. Furthermore, the outlook and prospects for future developments in MR-TADF skeletons are described.

Unlocking the Full Potential of Electron-Acceptor Molecules for Efficient and Stable Hole Injection

Understanding the hole-injection mechanism and improving the hole-injection property are of pivotal importance in the future development of organic optoelectronic devices. Electron-acceptor molecules with high electron affinity (EA) are widely used in electronic applications, such as hole injection and p-doping. Although p-doping has generally been studied in terms of matching the ionization energy (IE) of organic semiconductors with the EA of acceptor molecules, little is known about the effect of the EA of acceptor molecules on the hole-injection property. In this work, the hole-injection mechanism in devices is completely clarified, and a strategy to optimize the hole-injection property of the acceptor molecule is developed. Efficient and stable hole injection is found to be possible even into materials with IEs as high as 5.8 eV by controlling the charged state of an acceptor molecule with an EA of about 5.0 eV. This excellent hole-injection property enables direct hole injection into an emitting layer, realizing a pure blue organic light-emitting diode with an extraordinarily low turn-on voltage of 2.67 V, a power efficiency of 29 lm W^-1 , an external quantum efficiency of 28% and a Commission Internationale de l'Eclairage y coordinate of less than 0.10.

An indolo[3,2,1-jk]carbazole-fused multiple resonance-induced thermally activated delayed fluorescence emitter for an efficient narrowband OLED

By inserting a tricoordinate B atom into an indolo[3,2,1-jk]carbazole precursor, an efficient fused multiple resonance-induced thermally activated delayed fluorescence emitter was prepared, which exhibits a narrowband emission and a considerable reverse intersystem crossing rate. The corresponding organic light-emitting diode displays an external quantum efficiency of 27.2% with a suppressed efficiency roll-off.

Diradical B/N-Doped Polycyclic Hydrocarbons

Heterocyclic diradicaloids with atom-precise control over open-shell nature are promising materials for organic electronics and spintronics. Herein, we disclose quinoidal π-extension of a B/N-heterocycle for generating B/N-type organic diradicaloids. Two quinoidal π-extended B/N-doped polycyclic hydrocarbons that feature fusion of the B/N-heterocycle motif with the antiaromatic s-indacene or dicyclopenta[b,g]naphthalene core were synthesized. This quinoidal π-extension and B/N-heterocycle leads to their open-shell electronic nature, which stands in contrast to the multiple-resonance effect of conventional B/N-type emitters. These B/N-type diradicaloids have modulated (anti)aromaticity and enhanced diradical characters comparing with the all-carbon analogues, as well as intriguing properties, such as magnetic activities, narrow energy gaps and highly red-shifted absorptions. This study thus opens the new space for both of B/N-doped polycyclic π-systems and heterocyclic diradicaloids.

A Deep-Blue-Emitting Heteroatom-Doped MR-TADF Nonacene for High-Performance Organic Light-Emitting Diodes

We present a p- and n-doped nonacene compound, NOBNacene, that represents a rare example of a linearly extended ladder-type multiresonant thermally activated delayed fluorescence (MR-TADF) emitter. This compound shows efficient narrow deep blue emission, with a λPL of 410 nm, full width at half maximum, FWHM, of 38 nm, photoluminescence quantum yield, ΦPL of 71 %, and a delayed lifetime, τd of 1.18 ms in 1.5 wt % TSPO1 thin film. The organic light-emitting diode (OLED) using this compound as the emitter shows a comparable electroluminescence spectrum peaked at 409 nm (FWHM=37 nm) and a maximum external quantum efficiency (EQEmax ) of 8.5 % at Commission Internationale de l'Éclairage (CIE) coordinates of (0.173, 0.055). The EQEmax values were increased to 11.2 % at 3 wt % doping of the emitter within the emissive layer of the device. At this concentration, the electroluminescence spectrum broadened slightly, leading to CIE coordinates of (0.176, 0.068).

Solution-Processable Pure-Red Multiple Resonance-induced Thermally Activated Delayed Fluorescence Emitter for Organic Light-Emitting Diode with External Quantum Efficiency over 20

Developing solution-processable red organic light-emitting diodes (OLEDs) with high color purity and efficiency based on multiple resonance thermally activated delayed fluorescence (MR-TADF) is a formidable challenge. Herein, by introducing auxiliary electron donor and acceptor moieties into the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO) distributed positions of multiple resonance skeleton simultaneously, an effective strategy to obtain red MR-TADF emitters was represented. The proof-of-the-concept molecule BN-R exhibits a narrowband pure-red emission at 624 nm, with a high luminous efficiency of 94 % and a narrow bandwidth of 46 nm. Notably, the fabricated solution-processable pure-red OLED based on BN-R exhibits a state-of-the-art external quantum efficiency over 20 % with the Commission Internationale de I'Éclairage coordinates of (0.663, 0.337) and a long operational lifetime (LT₅₀ ) of 1088 hours at an initial luminance of 1000 cd m^-2 .

Planar Chiral Multiple Resonance Thermally Activated Delayed Fluorescence Materials for Efficient Circularly Polarized Electroluminescence

Chiral boron/nitrogen doped multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters are promising for highly efficient and color-pure circularly polarized organic light-emitting diodes (CP-OLEDs). Herein, we report two pairs of MR-TADF materials (Czp-tBuCzB, Czp-POAB) based on planar chiral paracyclophane with photoluminescence quantum yields of up to 98 %. The enantiomers showed symmetric circularly polarized photoluminescence spectra with dissymmetry factors |g_PL | of up to 1.6×10^-3 in doped films. Meanwhile, the sky-blue CP-OLEDs with (R/S)-Czp-tBuCzB showed an external quantum efficiency of 32.1 % with the narrowest full-width at half-maximum of 24 nm among the reported CP-OLEDs, while the devices with (R/S)-Czp-POAB displayed the first nearly pure green CP electroluminescence with |g_EL | factors at the 10^-3 level. These results demonstrate the incorporation of planar chirality into MR-TADF emitter is a reliable strategy for constructing of efficient CP-OLEDs.

Sequential Multiple Borylation Toward an Ultrapure Green Thermally Activated Delayed Fluorescence Material

Multiple-resonance thermally activated delayed fluorescence (MR-TADF) emitters have emerged as an important component of organic light-emitting diodes (OLEDs) because of their narrowband emission and high exciton utilization efficiency. However, the chemical space of MR-TADF emitters remains mostly unexplored because of the lack of suitable synthetic protocols. Herein, we demonstrate a sequential multiple borylation reaction that provides new synthetically accessible chemical space. ω-DABNA, the proof-of-concept material, exhibited narrowband green TADF with a full width at half-maximum of 22 nm and a small singlet-triplet energy gap of 13 meV. The OLED employing it as an emitter exhibited electroluminescence at 512 nm, with Commission International de l'Éclairage coordinates of (0.13, 0.73) and a high external quantum efficiency (EQE) of 31.1%. Moreover, the device showed minimum efficiency roll-off, with an EQE of 29.4% at 1000 cd m^-2.

Wide-range color-tunable polycyclo-heteraborin multi-resonance emitters containing B-N covalent bonds

Boron- and nitrogen (BN)-fused polycyclic aromatic frameworks with amine-directed formation of B-N covalent bonds have the potential to form a new family of facile-synthesis multi-resonance luminophores, which, however, still face imperative challenges in diversifying the molecular design to narrow the emission bandwidth and tune the emission colors. Here, we demonstrate a strategic implementation of B-N bond containing polycyclo-heteraborin multi-resonance emitters with wide-range colors from deep-blue to yellow-green (442-552 nm), small full-width at half-maxima of only 19-28 nm and high photoluminescence efficiencies, by stepwise modifying the basic para B-π-B structures with heteroatoms. The corresponding electroluminescent devices show superior maximum external quantum efficiencies with an exceptional low-efficiency roll-off, retaining 21.0%, 23.6% and 22.1% for the sky-blue, green and yellow-green devices at a high luminance of 5000 cd m^-2, respectively.

Gold(I) Multi-Resonance Thermally Activated Delayed Fluorescent Emitters for Highly Efficient Ultrapure-Green Organic Light-Emitting Diodes

Acceleration of singlet-triplet intersystem crossings (ISC) is instrumental in bolstering triplet exciton harvesting of multi-resonance thermally activated delayed fluorescent (MR-TADF) emitters. This work describes a simple gold(I) coordination strategy to enhance the spin-orbit coupling of green and blue BN(O)-based MR-TADF emitters, which results in a notable increase in rate constants of the spectroscopically observed ISC process to 3×10⁹  s^-1 with nearly unitary ISC quantum yields. Accordingly, the resultant thermally-stable Au^I emitters attained large values of delayed fluorescence radiative rate constant up to 1.3×10⁵ /1.7×10⁵  s^-1 in THF/PMMA film while preserving narrowband emissions (FWHM=30-37 nm) and high emission quantum yields (ca. 0.9). The vapor-deposited ultrapure-green OLEDs fabricated with these Au^I emitters delivered high luminance of up to 2.53×10⁵  cd m^-2 as well as external quantum efficiencies of up to 30.3 % with roll-offs as low as 0.8 % and long device lifetimes (LT₆₀ ) of 1210 h at 1000 cd m^-2 .

Ultra-Narrowband Blue Multi-Resonance Thermally Activated Delayed Fluorescence Materials

Ultra-narrowband blue multi-resonance-induced thermally activated delayed fluorescence (MR-TADF) materials (V-DABNA and V-DABNA-F), consisting of three DABNA subunits possessing phenyl or 2,6-difluorophenyl substituents on the peripheral nitrogen atoms are synthesized by one-shot triple borylation. Benefiting from the inductive effect of fluorine atoms, the emission maximum of V-DABNA-F (464 nm) is blueshifted from that of the parent V-DABNA (481 nm), while maintaining a small full width at half maximum (FWHM, 16 nm) and a high rate constant for reverse intersystem crossing (6.5 × 105 s-1 ). The organic light-emitting diodes (OLEDs) using V-DABNA and V-DABNA-F as emitters are fabricated by vapor deposition and exhibit blue emission at 483 and 468 nm with small FWHMs of 17 and 15 nm, corresponding to Commission Internationale d'Éclairage coordinates of (0.09, 0.27) and (0.12, 0.10), respectively. Both devices achieve high external quantum efficiencies of 26.2% and 26.6% at the maximum with minimum efficiency roll-offs of 0.9% and 3.2%, respectively, even at 1000 cd m-2 , which are record-setting values for blue MR-TADF OLEDs.

Double boron-embedded multiresonant thermally activated delayed fluorescent materials for organic light-emitting diodes

The subclass of multi resonant thermally activated delayed fluorescent emitters (MR-TADF) containing boron atoms has garnered significant attention in the field of organic light emitting diode (OLED) research. Among boron-based MR-TADF emitters, double boron-embedded MR-TADF (DB-MR-TADF) emitters show excellent electroluminescence performances with high photoluminescence quantum yields, narrow band emission, and beneficially small singlet-triplet energy levels in all the full-color gamut regions. This article reviews recent progress in DB-MR-TADF emitters, with particular attention to molecular design concepts, synthetic routes, optoelectronic properties, and OLED performance, giving future prospects for real-world applications.

Selenium-Doped Polycyclic Aromatic Hydrocarbon Multiresonance Emitters with Fast Reverse Intersystem Crossing for Narrowband Blue Emission

Two kinds of boron- (B), selenium- (Se), and nitrogen-doped (N) polycyclic aromatic hydrocarbon (PAH) emitters (Cz-BSeN and DCz-BSeN) with a multiresonance effect are developed for narrowband blue emission by embedding boron as an electron-deficient atom and selenium and nitrogen as electron-donating atoms into a benzo[a]naphtho[1,2,3-hi]aceanthrylene skeleton. It is found that both emitters exhibit strong spin-orbit coupling and fast reverse intersystem crossing (rate constant of 7.5-8.8 × 106 s-1) due to the heavy-atom effect of selenium, which is 2 orders of magnitude faster than its B, N-doped PAH analogue. Meanwhile, compared to parent B, Se, N-doped PAH emitter Cz-BSeN, incorporating carbazole moieties on the para position of the boron atom in DCz-BSeN not only blueshifts the emission by 7 nm without broadening its spectra but also results in an enhanced photoluminescent quantum efficiency of 93% in the doped film. The organic light-emitting diode (OLED) employing DCz-BSeN as emitter revealed narrowband blue emission at 481 nm with a small full-width at half-maximum (fwhm) of 32 nm, as well as a maximum external quantum efficiency of 22.3%, accompanied by alleviated efficiency roll-off compared to its B, N-containing counterpart.