Pickering Emulsion Catalysis: Interfacial Chemistry, Catalyst Design, Challenges, and Perspectives

Highly efficient enzymatic enrichment of n-3 polyunsaturated fatty acid glycerides via interfacial biocatalysis in Pickering emulsions

A novel Pickering interfacial biocatalysis (PIB) system has been, for the first time, successfully applied for the enzymatic selective hydrolysis of algae oils and fish oils to enrich n-3 PUFAs glycerides. Lipase AY 400SD was identified and adsorbed on hydrophobic hollow core-shell silica nanoparticles, resulting in the formation of the immobilized enzyme AY 400SD@HMSS-C18. The biocatalyst was employed as an emulsifier to stabilize the water-in-oil Pickering emulsion, resulting in the successful construction of the PIB system. The newly developed PIB system resulted in a notable enhancement of the n-3 PUFAs content of the six oils, with a mean increase ranging from 9.17 % to 23.09 %, and with the recovery rate of n-3 PUFAs exceeded 90 %. The platform demonstrated to be stable and recyclable. The present research illustrated that the PIB has the potential to be a viable alternative for the purpose of enhancing the content of n-3 PUFAs in glycerides.

Small Ligand-Involved Pickering Droplet Interface Controls Reaction Selectivity of Metal Catalysts

Developing efficient methods to improve catalytic selectivity, particularly without sacrificing catalytic activity, is of paramount significance for chemical synthesis. In this work, we report a small ligand-involved Pickering droplet interface as a brand-new strategy to effectively regulate reaction selectivity of metal catalysts. It was found that small ligands such as polar arenes could engineer the surface structure of Pt catalysts that were assembled at Pickering droplet interfaces. Due to the strong hydrogen-bonding interactions with water, the polar arenes preferentially adsorbed with the water adlayer that covered Pt surfaces, forming water-mediated metal-organic interfaces on the Pickering emulsion droplets. Such an interface system displayed a significantly enhanced p-vinylaniline selectivity from 8.7 to 94.2% with an unreduced conversion in p-nitrostyrene hydrogenation. The selectivity was found to follow a negatively linear correlation with the bond length of the interfacial hydrogen bonds. Theoretical calculations revealed that the small arene ligands could closely array at the interface, which modulated the adsorption patterns of reactant/product molecules to prevent the C═C group from approaching Pt surfaces without suppressing their accessibility toward reactant molecules. Such a remarkable interfacial steric effect contributed to the efficient control of the hydrogenation selectivity. Our work provides an innovative strategy to modulate the surface structure of metal catalysts, opening a new venue to tune catalytic selectivity.

A novel pH-responsive emulsion system stabilized by nanocelluloses modified with a rosin-based charge-reversible surfactant

Nanocelluloses as a natural polysaccharide nanoparticle are widely used in preparing Pickering emulsions, but less involved in stimuli-responsive Pickering emulsions, due to complicated covalent modification. In this study, a novel pH-responsive emulsion system was prepared using nanocellulose hydrophobized in situ with a unique pH-responsive surfactant (MPAA) derived from rosin. The headgroup charge of MPAA could be reversibly switched between a cationic form (MPAAH) and an anionic form (MPAANa) via adjusting pH, both of which had excellent water solubility. In acidic condition (pH 4.0), the negatively charged nanocellulose could be hydrophobized in situ by absorbing the cationic MPAAH, and stable and high-viscosity Pickering emulsion gels were obtained. In alkaline condition (pH 10.0), the nanocellulose dispersed in aqueous phase and formed thick aqueous lamellae with negative charge, preventing the flocculation and coalescence of the negatively charged droplets, and oil-in-dispersion emulsions with smaller droplet size and low viscosity were formed. The corresponding properties, such as droplet size, stability, and viscosity could be easily controlled by changing pH. Importantly, MPAA and nanocellulose could be separated and reused multiple times. The work proposed an effective method to achieve multiple recycling and reuse of emulsifiers, showing good economic benefits and potential sustainable applications.

Cationic Ring-Opening Polymerization-Induced Self-Assembly (CROPISA) of 2-Oxazolines: From Block Copolymers to One-Step Gradient Copolymer Nanoparticles

In recent years, polymerization-induced self-assembly (PISA) has emerged as a powerful method for the straightforward synthesis of polymer nanoparticles at high concentration. In this study, we describe for the first time the synthesis of poly(2-oxazoline) nanoparticles by dispersion cationic ring-opening polymerization-induced self-assembly (CROPISA) in n-dodecane. Specifically, a n-dodecane-soluble aliphatic poly(2-(3-ethylheptyl)-2-oxazoline) (PEHOx) block was chain-extended with poly(2-phenyl-2-oxazoline) (PPhOx). While the PhOx monomer is soluble in n-dodecane, its polymerization leads to n-dodecane-insoluble PPhOx, which leads to in situ self-assembly of the formed PEHOx-b-PPhOx copolymers. The polymerization kinetics and micellization upon second block formation were studied, and diverse nanoparticle dispersions were prepared, featuring varying block lengths and polymer concentrations, leading to dispersions with distinctive morphologies and physical properties. Finally, we developed a single-step protocol for the synthesis of polymer nanoparticles directly from monomers via gradient copolymerization CROPISA, which exploits the significantly greater reactivity of EHOx compared to that of PhOx during the statistical copolymerization of both monomers. Notably, this approach provides access to formulations with monomer compositions otherwise unattainable through the block copolymerization method. Given the synthetic versatility and application potential of poly(2-oxazolines), the developed CROPISA method can pave the way for advanced nanomaterials with favorable properties as demonstrated by using the obtained nanoparticles for stabilization of Pickering emulsions.

Pickering Emulsions as Catalytic Systems in Food Applications

Enzyme catalysis is important in food processing, such as in baking, dairy, and fiber processing and beverages. A recent advancement in catalysis is the development of Pickering emulsions as enzymatic catalytic systems; however, the use of Pickering emulsions (PEs) as catalytic systems in foods remains largely underdeveloped. Challenges exist that inhibit the widespread adoption of PEs as catalytic systems in foods. These limitations include the limited food-grade solid particle stabilizers, their poor dual wettability, and the potential effects of surface modifications of the solid particles on the stability and efficiency of the PEs. In this Review, the two types of PE catalysis (Pickering-assisted catalysis and Pickering interfacial catalysis), their formation, and some of their applications in the food industry are presented. In addition, the proposed solutions and strategies to improve the PE catalyst design are introduced. An outlook on how the field of PE catalysis will progress is briefly highlighted.

Regioselective functionalization of cellulose nanomaterial for advanced application

Cellulose nanomaterials (CNMs) with their remarkable properties and abundant natural sources have emerged as a versatile platform for material science. However, their widespread adoption to develop novel applications often hinges on precise control over their surface chemistry. Regioselective functionalization, i.e., the ability to modify specific hydroxy groups on the cellulose backbone or aldehyde reducing end group (REG), offers unparalleled control on their surface chemistry. This review highlights the exciting developments in regioselective functionalization of CNMs and their impacts on structure-property relationships. Key factors that influence regioselectivity are examined and exciting applications of regioselectively functionalized CNMs are reviewed. This review also highlights the need for efficient, large-scale regioselective functionalization techniques and identifies key areas for future research.

An Efficient Bifunctional Core-Shell ZIF-90@ZIF-67 Composite as a Stable Pickering Interfacial Catalyst for the Deacetalization-Knoevenagel Tandem Reaction

Exploiting advanced solid particles is crucial to the construction of Pickering emulsions catalysis. Recently, metal-organic frameworks (MOFs) have been used as ideal emulsifiers stabilizing Pickering emulsions for interfacial catalysis. Although Pickering emulsions stabilized by core-shell MOFs have significant importance in practical studies, to date there have been very limited reports on this topic. Herein, ZIF-90@ZIF-67, a core-shell material with simultaneous acid-base bifunctionality, was synthesized by seeded epitaxial growth. It was firstly applied as an emulsifier in Pickering emulsions to catalyze the deacetalization-Knoevenagel tandem reaction, which exhibited excellent catalytic properties and achieved extremely high yields. Additionally, ZIF-90@ZIF-67 showed high stability and remained well repeatable after five cycles. This work provides a platform for the design of structurally and functionally diverse MOF-based Pickering emulsions interfacial catalysis.

Liquid-nano-liquid interface-oriented anisotropic encapsulation

Emulsion interface engineering has been widely employed for the synthesis of nanomaterials with various morphologies. However, the instability of the liquid-liquid interface and uncertain interfacial interactions impose significant limitations on controllable fabrications. Here, we developed a liquid-nano-liquid interface-oriented anisotropic encapsulation strategy for fabricating asymmetric nanohybrids. Specifically, functional nanoparticles such as magnetic nanoparticles, lanthanide fluorescent nanoparticles, and Au nanorods were anisotropically encapsulated by mesoporous polydopamine (mPDA). In this emulsion system, the wetting behavior of functional nanoparticles at the water/oil interface could be manipulated by the stabilizer of the emulsion (surfactant), leading to the anisotropic assembly of mPDA shell and resulting in various nanostructures, including core-shell, yolk-shell with small opening, ball-in-bowl, and multipetal structures. Due to their structural asymmetry, inherent magnetic properties, and photothermal properties, the ball-in-bowl structured Fe3O4@SiO2&mPDA nanohybrids, serving as proof of concept for nanomotors, demonstrated effective penetration of bacterial biofilm and promotion of infected wound healing. Overall, our approach offers a different perspective for designing morphologically controllable asymmetric structures based on liquid-nano-liquid interface in microemulsion systems that hold great potential for establishing innovative functional nanomaterials.

Synthesis of a Cholesterol Derivative and Its Application in Gel Emulsion Preparation

As a small-molecule gelator used as a stabilizer in gel emulsions, it has numerous advantages, such as low dosage, independence from phase ratios, and ease of control. In this study, a cholesterol derivative (CSA) was designed and synthesized to be used as a stabilizer for gel emulsions. Gelation experiments demonstrated that this small molecule could gelate various organic solvents, including linear alkanes, toluene, isoamyl alcohol, and acetone. Based on these gelation experiments, a series of gel emulsions were prepared with water as the dispersed phase and an organic solvent immiscible with water as the continuous phase. Finally, the gelation behavior of the gelator/water/toluene and gelator/water/cyclohexane systems was investigated, exploring the effects of different systems and varying water content within the same system on the structure and stability of the gel emulsions. Studies have shown that the gel emulsion prepared from the gelator/water/toluene system exhibits superior stability, likely due to the molecular self-assembly behavior of this cholesterol derivative exhibited in the water/toluene biphasic system. The research results provide a basis for using gel emulsions as templates to prepare porous materials and adjust their internal structure, ultimately laying a solid foundation for applying these porous materials in fields such as adsorption and catalysis.

Multifunctional composite film of curcumin Pickering emulsion stabilized by lignocellulose nanofibrils isolated from bamboo shoot shells for monitoring shrimp freshness

Concerns about food safety and environmental impact from chemical surfactants have prompted interest in natural lignocellulosic materials as alternatives. In this study, we combined hydrated deep eutectic solvent (DES) pretreatment with ultrasound treatment to prepare lignocellulosic nanofibrils (LCNF) from bamboo shoot shells with appropriate surface properties for stabilizing Pickering emulsions. The pretreatment intensity effectively modulated the surface characteristics of LCNF, achieving desirable wettability through lignin retention and in-situ esterification. The resulting LCNF/curcumin Pickering emulsion (CPE) demonstrated curcumin protection and pH-responsive color changes, while the ensuing CPE/PVA composite film exhibited ultraviolet shielding, mechanical strength, oxygen barrier, and antioxidant properties. Furthermore, the CPE/PVA film showed promise as a real-time indicator for monitoring shrimp freshness, maintaining sensitivity to spoilage even after six months of storage. These findings advance the advancement of green LCNF technologies, providing eco-friendly solutions for valorizing bamboo shoot shells and enhancing the application of LCNF in Pickering emulsions.

Natural shellac-based microcapsules as lipase carriers for recyclable efficient Pickering interfacial biocatalysis

Enzyme is an important class of catalyst. However, the efficiency of enzyme-catalyzed reactions is constrained by the limited contact between the enzyme and its substrate. In this study, to overcome this challenge, lipase-loaded microcapsules were prepared from natural shellac and nanoparticles using the emulsion template method. These microcapsules can perform dual roles as stabilizers and enzyme carriers to construct a water-in-oil Pickering interfacial biocatalytic system. The results showed that the hydrolytic conversion of the microcapsules could reach 90% within 20 min, which was significantly higher than that of the traditional biphasic system. The catalytic activity was influenced by the oil-to-water volume ratio and the microcapsule content. The microcapsules remained highly catalytic efficiency even after storage for three months or seven cycles of reuse. These microcapsules were prepared without the use of any cross-linkers or harsh solvents. This green and efficient catalytic system has great application prospects in the food industry.

Catalytic applications of organic-inorganic hybrid porous materials

Organic-inorganic hybrid porous materials (OIHMs) inherit the unique properties from both organic and inorganic components, and the flexibility in the incorporation of functional groups renders the OIHMs an ideal platform for the construction of catalytic materials with multiple active sites. The preparation of OIHMs with precise locations of organic-inorganic components and tunable structures is one of the important topics for the catalytic application of OIHMs, but it is still very challenging. In this feature article, we describe our work related to the preparation of OIHMs via confining active sites in the nanostructure and a layer-by-layer assembly method and their applications in acid-base catalysis, catalytic hydrogenation and photocatalysis with a focus on the elucidation of the synergistic effects of different active sites and the unique properties of OIHMs in catalysis.

Oil-water interfaces of Pickering emulsions: microhabitats for living cell biocatalysis

Based on the size of bacterial cells and bacterial surface hydrophobicity, some bacteria meet the requirements of Pickering particles to stabilize Pickering emulsions. Here, we discuss the oil-water interfaces of bacteria-stabilized Pickering emulsions as microhabitats for microbial metabolism of oil-soluble chemicals. The correlation between living bacteria-stabilized Pickering emulsions and microhabitats of living bacteria at oil-water interfaces offers a new perspective to study bioprocess engineering at the mesoscale between the cell and reactor scales, which not only provides novel parameters to optimize the bioprocess engineering, but also unravels the paradox of some natural phenomena related to living cell biocatalysis.

CO2/N2 Triggered Aqueous Recyclable Surfactants for Biphasic Catalytic Reactions in the Pickering Emulsions

The utilization of Pickering emulsions in interfacial catalysis offers a promising environmental platform for biphasic reactions. However, complicated surface coating or chemical grafting methods are always required to prepare the surface-active catalysts for the Pickering emulsions, since most of them are commercially unavailable. Here, we report CO2-switchable Pickering emulsions for biphasic reactions, in which Pd@Al2O3 nanoparticles are in situ modified by a CO2/N2 responsive surfactant. Compared with the chemical grafted methods, the in situ formed Pickering interfacial catalysts avoid complex chemical modification. Furthermore, efficient demulsification and separation of the oil phase and the products without surfactant contaminations can be achieved by CO2 trigger. The Pickering interfacial catalysis system can also be reformed after the aqueous phase containing the catalyst nanoparticles, and the surfactant is recycled and reused. The strategy is universal for nitrobenzene reductions and alcohol oxidations, providing a convenient and green method for the preparation of Pickering catalysts with commercially available nanoparticles, efficient emulsion separation, and recovery of the catalyst nanoparticles and emulsifiers in various two-phase organic reactions.

3D printing of Pickering emulsions, Pickering foams and capillary suspensions - A review of stabilization, rheology and applications

Pickering emulsions and foams as well as capillary suspensions are becoming increasingly more popular as inks for 3D printing. However, a lack of understanding of the bulk rheological properties needed for their application in 3D printing is potentially stifling growth in the area, hence the timeliness of this review. Herein, we review the stability and bulk rheology of these materials as well as the applications of their 3D-printed products. By highlighting how the bulk rheology is tuned, and specifically the inks storage modulus, yield stress and critical balance between the two, we present a rheological performance map showing regions where good prints and slumps are observed thus providing clear guidance for future ink formulations. To further advance this field, we also suggest standard experimental protocols for characterizing the bulk rheology of the three types of ink: capillary suspension, Pickering emulsion and Pickering foam for 3D printing by direct ink writing.

Amphiphilic Nanogels as Versatile Stabilizers for Pickering Emulsions

Pickering emulsions (PEs) are stabilized by particles at the water/oil interface and exhibit superior long-term stability compared to emulsions with molecular surfactants. Among colloidal stabilizers, nano/microgels facilitate emulsification and can introduce stimuli responsiveness. While increasing their hydrophobicity is connected to phase inversion from oil-in-water (O/W) to water-in-oil (W/O) emulsions, a predictive model to relate this phase inversion to the molecular structure of the nano/microgel network remains missing. Addressing this challenge, we developed a library of amphiphilic nanogels (ANGs) that enable adjusting their hydrophobicity while maintaining similar colloidal structures. This enabled us to systematically investigate the influence of network hydrophobicity on emulsion stabilization. We found that W/O emulsions are preferred with increasing ANG hydrophobicity, oil polarity, and oil/water ratio. For nonpolar oils, increasing emulsification temperature enabled the formation of W/O PEs that are metastable at room temperature. We connected this behavior to interfacial ANG adsorption kinetics and quantified ANG deformation and swelling in both phases via atomic force microscopy. Importantly, we developed a quantitative method to predict phase inversion by the difference in Flory-Huggins parameters between ANGs with water and oil (χwater - χoil). Overall, this study provides crucial structure-property relations to assist the design of nano/microgels for advanced PEs.

Interfacial Effects of Catalysis in Pickering Emulsions

Liquid-liquid or gas-liquid interfaces are ubiquitous in nature and in industrial production. Understanding the unique effects arising from the asymmetric interfaces and controlling the catalytic reactions are frontiers of physical chemistry. However, our understanding of the reactivity and selectivity at the interfaces remains scant. Pickering emulsions are emerging as a stable biphasic reaction system, which provides a new opportunity for clarifying the inherent features responsible for prominent interfacial reactivity or selectivity. This Perspective tentatively discusses the unique effects of interfacial adsorption, hydrogen bonding of water molecules, and strong electric field at the interfaces. Additionally, it highlights key insights into the fundamental mechanisms of reaction kinetic and thermodynamic alterations, molecular orientations, and the spontaneous generation of reactive species at the interfaces through representative examples. Finally, we delineate the current challenges and propose future research directions. The perspectives advanced herein may serve as valuable guidance for the design of efficient interfacial catalytic systems.

Pickering Emulsions Biocatalysis: Recent Developments and Emerging Trends

Biocatalysis within biphasic systems is gaining significant attention in the field of synthetic chemistry, primarily for its ability to solve the problem of incompatible solubilities between biocatalysts and organic compounds. By forming an emulsion from these two-phase systems, a larger surface area is created, which greatly improves the mass transfer of substrates to the biocatalysts. Among the various types of emulsions, Pickering emulsions stand out due to their excellent stability, compatibility with biological substances, and the ease with which they can be formed and separated. This makes them ideal for reusing both the emulsifiers and the biocatalysts. This review explores the latest developments in biocatalysis using Pickering emulsions. It covers the structural features, methods of creation, innovations in flow biocatalysis, and the role of interfaces in these processes. Additionally, the challenges and future directions are discussed in combining chemical and biological catalysts within Pickering emulsion frameworks to advance synthetic methodologies.

Nanoparticle Surfactants at Complex Emulsion Interfaces

Using nanoparticle surfactants to stabilize the liquid-liquid interface has attracted significant attention for developing all-liquid constructs including emulsions and liquid devices. Here, an efficient strategy is demonstrated to stabilize complex emulsions that consist of multiphase droplets by using the co-assembly between the cellulose nanocrystal and amine-functionalized polystyrene. Cellulose nanocrystal surfactants (CNCSs) form and assembly in situ at the specified area of emulsion interface, showing a unique pH responsiveness due to their dynamic nature and allowing the reconfiguration of complex emulsion from encapsulated to Janus structures. Such complex emulsions can be further used as the templates to fabricate polymeric particles with hollow, semi-spherical, and spherical shapes on large scale. These findings establish a promising platform for designing intelligent soft matter that can be used in microreactors, sensors, and anisotropic materials.

Stimulus-Responsive Gas Marbles as an Amphibious Carrier for Gaseous Materials

Gas marbles are a new family of particle-stabilized soft dispersed system with a soap bubble-like air-in-water-in-air structure. Herein, stimulus-responsive character is successfully introduced to a gas marble system for the first time using polymer particles carrying a poly(tertiary amine methacrylate) (pKa ≈7) steric stabilizer on their surfaces as a particulate stabilizer. The gas marbles exhibited long-term stability when transferred onto the planar surface of liquid water, provided that the solution pH of the subphase is basic and neutral. In contrast, the use of acidic solutions led to immediate disintegration of the gas marbles, resulting in release of the inner gas. The critical minimum solution pH required for long-term gas marble stability correlates closely with the known pKa value for the poly(tertiary amine methacrylate) stabilizer. It also demonstrates amphibious motions of the gas marbles.

Chemical and engineering bases for green H2O2 production and related oxidation and ammoximation of olefins and analogues

Plastics, fibers and rubber are three mainstream synthetic materials that are essential to our daily lives and contribute significantly to the quality of our lives. The production of the monomers of these synthetic polymers usually involves oxidation or ammoximation reactions of olefins and analogues. However, the utilization of C, O and N atoms in current industrial processes is <80%, which represents the most environmentally polluting processes for the production of basic chemicals. Through innovation and integration of catalytic materials, new reaction pathways, and reaction engineering, the Research Institute of Petroleum Processing, Sinopec Co., Ltd. (RIPP) and its collaborators have developed unique H2O2-centered oxidation/ammoximation technologies for olefins and analogues, which has resulted in a ¥500 billion emerging industry and driven trillions of ¥s' worth of downstream industries. The chemical and engineering bases of the production technologies mainly involve the integration of slurry-bed reactors and microsphere catalysts to enhance H2O2 production, H2O2 propylene/chloropropylene epoxidation for the production of propylene oxide/epichlorohydrin, and integration of H2O2 cyclohexanone ammoximation and membrane separation to innovate the caprolactam production process. This review briefly summarizes the whole process from the acquisition of scientific knowledge to the formation of an industrial production technology by RIPP. Moreover, the scientific frontiers of H2O2 production and related oxidation/ammoximation processes of olefins and analogues are reviewed, and new technological growth points are envisaged, with the aim of maintaining China's standing as a leader in the development of the science and technologies of H2O2 production and utilization.

Ultrasound-assisted intensification of Pickering interfacial biocatalysis preparation of vitamin A aliphatic esters

A novel approach to ultrasound-assisted Pickering interfacial biocatalysis (PIB) has been proposed and implemented for the efficient enzymatic transesterification production of vitamin A fatty acid esters. This is the first instance of exploiting the synergistic effect of ultrasound and the bifunctional modification of enzyme supports to accelerate biocatalytic performance in PIB systems. The optimal conditions were determined to be ultrasound power of 70 W, on/off time of 5 s/5 s, substrate molar ratio of 1:1, enzyme addition of 2 %, and a volume ratio of n-hexane to PBS of 3:1, a temperature of 40 °C, and a time of 30 min. The application of ultrasound technology not only improved lipase activity but also allowed for a reduction in emulsion droplet size to enhance interfacial mass transfer.Bifunctional modification of silica-based supports enhanced stability of immobilized enzymes by increasing hydrogen bonding while maintaining the active interface microenvironment. Compared with a non-ultrasound-assisted PIB system stabilized by mono-modified immobilized enzyme particles, the catalytic efficacy (CE) of the novel system reached 8.18 mmol g-1 min-1, which was enhanced by 3.33-fold, while the interfacial area was found to have increased by 17.5-fold. The results facilitated the conversion of vitamin A palmitate (VAP), vitamin A oleate (VAO), vitamin A linoleate (VAL), and vitamin A linolenate (VALn), with conversion rates of approximately 98.2 %, 97.4 %, 96.1 %, and 94.7 %, respectively. This represents the most efficient example that has been reported to our knowledge. Furthermore, the system demonstrated improved reusability, with a conversion rate of 62.1 % maintained even after 10 cycles. The findings presented in this paper provide valuable insights into an efficient and conveniently promising protocol for the development of PIB systems.

Enhanced Photobiocatalytic Cascades at Pickering Droplet Interfaces

Developing new methods to engineer photobiocatalytic reactions is of utmost significance for artificial photosynthesis, but it remains a grand challenge due to the intrinsic incompatibility of biocatalysts with photocatalysts. In this work, photocatalysts and enzymes were spatially colocalized at Pickering droplet interfaces, where the reaction microenvironment and the spatial distance between two distinct catalysts were exquisitely regulated to achieve unprecedented photobiocatalytic cascade reactions. As proof of the concept, ultrathin graphitic carbon nitride nanosheets loaded with Au nanoparticles were precisely positioned in the outer interfacial layer of Pickering oil droplets to produce H2O2 under light irradiation, while enzymes were exactly placed in the inner interfacial layer to catalyze the subsequent biocatalytic oxidation reactions using in situ formed H2O2 as an oxidant. In the alkene epoxidation and thioether oxidation, our interfacial photobiocatalytic cascades showed a 2.0-5.8-fold higher overall reaction efficiency than the photobiocatalytic cascades in the bulk water phase. It was demonstrated that spatial localization of the photocatalyst and the enzyme at Pickering oil droplet interfaces not only provided their respective preferable reaction environments and intimate proximity for rapid H2O2 transport but also protected the enzyme from oxidative inactivation caused by the photogenerated species. These remarkable interfacial effects contributed to the significantly enhanced photobiocatalytic cascading efficiency. Our work presents an innovative photobiocatalytic reaction system with manifold benefits, providing a cutting-edge platform for solar-driven chemical transformations via photobiocatalysis.

Nano-based drug delivery systems for active ingredients from traditional Chinese medicine: Harnessing the power of nanotechnology

Introduction: Traditional Chinese medicine (TCM) is gaining worldwide popularity as a complementary and alternative medicine. The isolation and characterization of active ingredients from TCM has become optional strategies for drug development. In order to overcome the inherent limitations of these natural products such as poor water solubility and low bioavailability, the combination of nanotechnology with TCM has been explored. Taking advantage of the benefits offered by the nanoscale, various drug delivery systems have been designed to enhance the efficacy of TCM in the treatment and prevention of diseases. Methods: The manuscript aims to present years of research dedicated to the application of nanotechnology in the field of TCM. Results: The manuscript discusses the formulation, characteristics and therapeutic effects of nano-TCM. Additionally, the formation of carrier-free nanomedicines through self-assembly between active ingredients of TCM is summarized. Finally, the paper discusses the safety behind the application of nano-TCM and proposes potential research directions. Discussion: Despite some achievements, the safety of nano-TCM still need special attention. Furthermore, exploring the substance basis of TCM formulas from the perspective of nanotechnology may provide direction for elucidating the scientific intension of TCM formulas.

Fabrication and Optimization of Pickering Emulsion Stabilized by Lignin Nanoparticles for Curcumin Encapsulation

To develop reversible pH-responsive emulsifiers of natural origin, alkali lignin (AL) was used to develop oil-in-water Pickering emulsions. AL was first modified to synthesize quaternized alkali lignin (QAL), which displayed pH-responsive properties and demonstrated solubility in both acidic and alkaline solutions. In contrast, QAL exhibited insolubility and formed particles in neutral solutions, thereby making it a suitable candidate for utilization as an emulsifier in doubly pH-responsive Pickering emulsions. At pH 5-9, the emulsions were stable. Above or below this pH range, the system demulsifies, resulting in a reversible Pickering emulsifier with two pH-controlled transitions. On the basis of this pH-dependent behavior, lignin-based Pickering emulsions (LPE) could be subjected to several cycles of emulsification-demulsification by alternating the pH of the aqueous phase between basic and acidic, while the droplet size and storage stability were maintained. Curcumin was used as a drug model to study the loading/release behavior of LPE, finding that 50.08% of curcumin could be encapsulated in LPE. The in vitro release of curcumin was pH-dependent. In addition, LPE exhibited an outstanding protective effect against the ultraviolet-induced degradation of curcumin.

Synergistic Effect of Asphaltene, Resin, and Wax Improving the Emulsification and Interfacial Properties of a High-Phase-Inversion Thin Oil

Nowadays, high-phase-inversion in situ emulsification technology has shown great potential in enhancing oil recovery from high-water-cut thin-oil reservoirs. However, emulsification characteristics, interfacial properties, and the mechanism of high phase inversion have not been systematically described. In this study, an emulsification experiment was conducted to investigate the effects of shear time, shear rate, and temperature on the phase inversion of thin oil. Furthermore, the influence of resin and wax on the dispersion of asphaltene was studied through microscopic morphology analysis. Interfacial tension measurement and interfacial viscoelasticity analysis were carried out to determine the interaction characteristics of asphaltene, resin, and wax at the interface. The results showed that, at 50 °C, the phase-inversion point of thin oil reached as high as 75%, and even at 60 °C, it remained at 70%. The shear time and shear rate did not affect the phase-inversion point of thin oil, while an increase in temperature led to a decrease in the phase-inversion point. Moreover, compared to the 20% phase-inversion point of base oil, the phase-inversion point increased with different proportions of asphaltene, resin, and wax. Particularly, at the ratio of asphaltene/resin/wax = 1:5:9, the phase-inversion point reached as high as 80%, indicating the optimal state. In this proportion, asphaltene aggregates exhibited the smallest and most uniform size, best dispersion, lower interfacial tension, and higher interfacial modulus. These findings provide reference and guidance for further enhancing oil recovery in medium-to-high-water-cut thin-oil reservoirs.

Pickering emulsion biocatalysis: Bridging interfacial design with enzymatic reactions

Non-homogeneous enzyme-catalyzed systems are more widely used than homogeneous systems. Distinguished from the conventional biphasic approach, Pickering emulsion stabilized by ultrafine solid particles opens up an innovative platform for biocatalysis. Their vast specific surface area significantly enhances enzyme-substrate interactions, dramatically increasing catalytic efficiency. This review comprehensively explores various aspects of Pickering emulsion biocatalysis, provides insights into the multiple types and mechanisms of its catalysis, and offers strategies for material design, enzyme immobilization, emulsion formation control, and reactor design. Characterization methods are summarized for the determination of drop size, emulsion type, interface morphology, and emulsion potential. Furthermore, recent reports on the design of stimuli-responsive reaction systems are reviewed, enabling the simple control of demulsification. Moreover, the review explores applications of Pickering emulsion in single-step, cascade, and continuous flow reactions and outlines the challenges and future directions for the field. Overall, we provide a review focusing on Pickering emulsions catalysis, which can draw the attention of researchers in the field of catalytic system design, further empowering next-generation bioprocessing.

Electrochemical oxidation of concentrated benzyl alcohol to high-purity benzaldehyde via superwetting organic-solid-water interfaces

Organic electrosynthesis in aqueous media is presently hampered by the poor solubility of many organic reactants and thus low purity of liquid products in electrolytes. Using the electrooxidation of benzyl alcohol (BA) as a model reaction, we present a "sandwich-type" organic-solid-water (OSW) system, consisting of BA organic phase, KOH aqueous electrolyte, and porous anodes with Janus-like superwettability. The system allows independent diffusion of BA molecules from the organic phase to electrocatalytic active sites, enabling efficient electrooxidation of high-concentration BA to benzaldehyde (97% Faradaic efficiency at ~180 mA cm-2) with substantially reduced ohmic loss compared to conventional solid-liquid systems. The confined organic-water boundary within the electrode channels suppresses the interdiffusion of molecules and ions into the counterphase, thus preventing the hydration and overoxidation of benzaldehyde during long-term electrocatalysis. As a result, the direct production of high-purity benzaldehyde (91.7%) is achieved in a flow cell, showcasing the effectiveness of electrocatalysis over OSW interfaces for the one-step synthesis of high-purity organic compounds.

TEMPO-Grafted Polystyrene/Polymethacrylate Organosiloxane Janus Nanohybrids as Efficient Pickering Interfacial Catalyst for Selective Aerobic Oxidation of Cinnamyl Alcohol

The novel 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) groups immobilized on functional polymers or nanoparticles emerged as potential Pickering interfacial catalysts (PICs) for effective catalysis in biphasic systems. In this study, a snowman-shaped Janus-structured polymer with TEMPO-anchored nanohybrid particles (SM-JPP-TEMPO) was prepared and employed as a potential PIC in the Anelli-Montanari system for the selective oxidation of alcohol. The amphiphilic character of SM-JPP-TEMPO particles plays a dual role as an emulsifier and catalyst in the Pickering emulsion. As a result, it enables smaller droplets (102 μm) at the water-in-oil (W/O) interface and reduces the interfacial tension from 26.58 to 17.38 mN/m, which improves the stability of the Pickering emulsion system. This constructed Pickering emulsion microreactor offers a larger interface contact area and shortens the mass transfer distance of the substrate of cinnamyl alcohol, which significantly enhances the catalytic conversion at the Anelli-Montanari oxidation system, thus achieving remarkable conversion efficiency of (92.3%) with excellent selectivity (99%) in static (stirring-free) condition. It was found that the Janus nanohybrid catalyst (SM-JPP-TEMPO) enhanced 1.29-fold catalytic efficiency compared to the TEMPO grafted spherical polystyrene nanoparticle (PS-NPs-TEMPO) catalyst (72%). Moreover, after seven consecutive cycles, the Janus nanocatalyst (SM-JPP-TEMPO) maintained the conversion significantly. Hence, these results collectively highlight that the amphiphilic SM-JPP-TEMPO catalyst provides an efficient and eco-friendly strategy for the intensification of liquid-liquid biphasic reaction systems for potential applications in industries.

Zeolitic Pickering Emulsifier with Intrinsic Amphiphilicity

The formation of oil-in-water Pickering emulsions stabilized by lamellar zeolite MWW (International Zeolite Association, three-letters code) emulsifier without surface grafting is investigated. The crucial emulsification factors are the oligolayer morphology and amphiphilicity developed upon acidic treatment (NH4+ exchange/calcination, HNO3 treatment). In contrast with the readily available/abundant hydrophilic ≡Si-OH group in layer MWW, the lipophilicity generated by strong acid sites is another key to the success of emulsification. Hydrocarbon-strong acid site interaction is long known in petrochemistry and superacid research. However, to the best of our knowledge, this interaction was first introduced to gain lipophilicity in emulsion formation. Finally, the Pd-loaded acidic form of the MWW zeolite successfully stabilized the toluene/H2O emulsion system. The biphasic interfacial nitroarene hydrogenation demonstrated excellent catalytic performance. Overall, this work provided not only a new kind of intrinsic solid to emulsify the organic-aqueous biphase system but also a new mechanism to generate lipophilicity. Both are important for the applications and designs of Pickering emulsion materials.

Amphiphilic Covalent Organic Framework Nanoparticles for Pickering Emulsion Catalysis with Size Selectivity

Exploiting advanced amphiphilic solid catalysts is crucial to the development of Pickering emulsion catalysis. Herein, covalent organic framework (COF) nanoparticles constructed with highly hydrophobic monomers as linkers were found to show superior amphiphilicity and they were then developed as a new class of solid emulsifiers for Pickering emulsion catalysis. Employing amphiphilic COFs as solid emulsifiers, Pickering emulsions with controllable emulsion type and droplet sizes were obtained. COF materials have also been demonstrated to serve as porous surface coatings to replace traditional surface modifications for stabilizing Pickering emulsions. After implanting Pd nanoparticles into amphiphilic COFs, the obtained catalyst displayed a 3.9 times higher catalytic efficiency than traditional amphiphilic solid catalysts with surface modifications in the biphasic oxidation reaction of alcohols. Such an enhanced activity was resulted from the high surface area and regular porous structure of COFs. More importantly, because of their tunable pore diameters, Pickering emulsion catalysis with remarkable size selectivity was achieved. This work is the first example that COFs were applied in Pickering emulsion catalysis, providing a platform for exploring new frontiers of Pickering emulsion catalysis.

Pd NP-loaded covalent organic framework for pH-switched Pickering emulsion catalytic dechlorination

Quinoline carboxylic acid-linked and Pd nanoparticle (NP)-loaded COF nanospheres were constructed via a three-component one-pot Doebner reaction and post-synthetic metalation. The obtained Pd@DhaTAPB-COOH solid stabilizer can greatly promote the pH-switched recyclable Pickering interfacial dechlorination reaction, which sheds light on the bright future of smart Pickering emulsion catalysis.

Polyoxometalate-loaded hyper-crosslinked nanoparticles as a Pickering interfacial catalyst for solvent-free epoxidation of allyl chloride under static conditions

Epoxidation of allyl chloride and hydrogen peroxide (H2O2) carried out in heterogeneous catalytic systems suffer from poor reaction efficiency due to their heavy mass transfer resistance present at the liquid-liquid interface. Pickering interfacial catalysis (PIC) provides an elegant solution by involving the design of amphiphilic heterogeneous catalysts, which can act as emulsifiers simultaneously. In this study, interface-active polyoxometalate-loaded hyper-crosslinked nanoparticles (HCNPs) were designed. The structural properties of materials were characterized in detail by elemental analysis, Zeta potential, ICP-OES, SEM, TEM, BET, FT-IR, TGA, and XPS. The prepared nanoparticles can build efficient W/O PIC systems with allyl chloride and H2O2. Systematic experiments indicate that catalysts' surface properties, catalyst dosage, and water/oil volume ratio significantly affect the PIC system's catalytic activity and emulsion properties. Moreover, this PIC system maintains high stability after the reaction and can be reused for at least 8 cycles. Excitingly, these interface-active HCNPs can also efficiently promote allyl chloride epoxidation in the absence of solvent and external stirring, illustrating that this approach holds great potential for developing catalytic systems suitable for multiphase reactions.

Enzymatic Synthesis of Structured Lipids Enriched with Medium- and Long-Chain Triacylglycerols via Pickering Emulsion-Assisted Interfacial Catalysis: A Preliminary Exploration

Medium- and long-chain triacylglycerol (MLCT), as a novel functional lipid, is valuable due to its special nutritional properties. Its low content in natural resources and inefficient synthesis during preparation have limited its practical applications. In this study, we developed an effective Pickering emulsion interfacial catalysis system (PE system) for the enzymatic synthesis of MLCT by trans-esterification. Lipase NS 40086 served simultaneously as a catalyst and a solid emulsifier to stabilize the Pickering emulsion. Benefitting from the sufficient oil-water interface, the obtained PE system exhibited outstanding catalytic efficiency, achieving 77.5% of MLCT content within 30 min, 26% higher than that of a water-free system. The Km value (0.259 mM) and activation energy (14.45 kJ mol-1) were 6.8-fold and 1.6-fold lower than those of the water-free system, respectively. The kinetic parameters as well as the molecular dynamics simulation and the tunnel analysis implied that the oil-water interface enhanced the binding between substrate and lipase and thus boosted catalytic efficiency. The conformational changes in the lipase were further explored by FT-IR. This method could give a novel strategy for enhancing lipase activity and the design of efficient catalytic systems to produce added-value lipids. This work will open a new methodology for the enzymatic synthesis of structured lipids.

Surfactants Influencing the Biocatalytic Performance of Natural Alkane-Degrading Bacteria via Interfacial Biocatalysis in Pickering Emulsions

Setting superhydrophobic Mycobacterium sp. as an example, the hydrophobic bacteria acting as demulsifying agents of surfactant-stabilized conventional emulsions, vice versa, the synergistic/antagonistic influence of nonionic surfactants (Tween 80 or Span 80) on the stability of the bacteria-stabilized Pickering emulsions was investigated. At the same time, the activated/suppression effect of nonionic surfactants on microbial degradation of tetradecane, which exhibited a dose-response relationship, was also found. The hydrophobic bacteria acting as demulsifying agents and the suppression influence of nonionic surfactants on the biocatalytic performance (indexing as biomass) of natural alkane-degrading bacteria, believed to be totally separated concepts previously, are for the first time found to be closely related to in situ surface modification of bacteria with nonionic surfactants. During the degradation of tetradecane by Mycobacterium sp. in the presence of nonionic surfactants, demulsification due to the bacteria acting as demulsifying agents and interfacial biocatalysis in the bacteria-stabilized Pickering emulsions are involved, which provides useful information to select optimal dispersants for marine oil spills.

Opportunities and Challenges of Metal-Organic Framework Micro/Nano Reactors for Cascade Reactions

Building bridges among different types of catalysts to construct cascades is a highly worthwhile pursuit, such as chemo-, bio-, and chemo-bio cascade reactions. Cascade reactions can improve the reaction efficiency and selectivity while reducing steps of separation and purification, thereby promoting the development of "green chemistry". However, compatibility issues in cascade reactions pose significant constraints on the development of this field, particularly concerning the compatibility of diverse catalyst types, reaction conditions, and reaction rates. Metal-organic framework micro/nano reactors (MOF-MNRs) are porous crystalline materials formed by the self-assembly coordination of metal sites and organic ligands, possessing a periodic network structure. Due to the uniform pore size with the capability of controlling selective transfer of substances as well as protecting active substances and the organic-inorganic parts providing reactive microenvironment, MOF-MNRs have attracted significant attention in cascade reactions in recent years. In this Perspective, we first discuss how to address compatibility issues in cascade reactions using MOF-MNRs, including structural design and synthetic strategies. Then we summarize the research progress on MOF-MNRs in various cascade reactions. Finally, we analyze the challenges facing MOF-MNRs and potential breakthrough directions and opportunities for the future.

Bottom-Up Synthesis of Multicompartmentalized Microreactors for Continuous Flow Catalysis

The bottom-up assembly of biomimetic multicompartmentalized microreactors for use in continuous flow catalysis remains a grand challenge because of the structural instability or the absence of liquid microenvironments to host biocatalysts in the existing systems. Here, we address this challenge using a strategy that combines stepwise Pickering emulsification with interface-confined cross-linking. Our strategy allows for the fabrication of robust multicompartmentalized liquid-containing microreactors (MLMs), whose interior architectures can be exquisitely tuned in a bottom-up fashion. With this strategy, enzymes and metal catalysts can be separately confined in distinct subcompartments of MLMs for processing biocatalysis or chemo-enzymatic cascade reactions. As exemplified by the enzyme-catalyzed kinetic resolution of racemic alcohols, our systems exhibit a durability of 2000 h with 99% enantioselectivity. Another Pd-enzyme-cocatalyzed dynamic kinetic resolution of amines further demonstrates the versatility and long-term operational stability of our MLMs in continuous flow cascade catalysis. This study opens up a new way to design efficient biomimetic multicompartmental microreactors for practical applications.

Adding nanoparticles to improve emulsion efficiency and enhance microbial degradation in Pickering emulsions

Interfacial microbial degradation of alkane in Pickering emulsions stabilized by hydrophobic bacterial cells is a new mechanism for microbial degradation of water-insoluble chemicals, where both water-insoluble chemicals in the oil phase and water-soluble nutrients (such as nitrogen and phosphorus) in the water phase are bio-accessible to living microorganisms anchoring onto the oil-water interfaces. In the present work, super-hydrophobic Mycobacterium sp. (contact angle 168.6°) degradation of tetradecane was set up as a model. Addition of fumed SiO2 particles (Aerosil® R974) as a new strategy was developed to enhance tetradecane degradation where the biodegradation rate (based on the accumulated biomass) increased by approximately 80%. The enhanced effect of SiO2 particles on the tetradecane degradation attributed to the synergistic effect of SiO2 particles on the emulsion efficiency of Pickering emulsions stabilized by bacterial cells and then on the enhancement of interfacial microbial degradation in Pickering emulsions. KEY POINTS: • Interfacial microbial degradation in bacterial cells stabilized Pickering emulsions. • Adding fumed SiO2 particles to enhance microbial degradation of tetradecane. • Correlation relationship between emulsion efficiency and interfacial microbial degradation.

Lignin nanoparticles as co-stabilizers and modifiers of nanocellulose-based Pickering emulsions and foams

Nanocellulose is very hydrophilic, preventing interactions with the oil phase in Pickering emulsions. This limitation is herein addressed by incorporating lignin nanoparticles (LNPs) as co-stabilizers of nanocellulose-based Pickering emulsions. LNP addition decreases the oil droplet size and slows creaming at pH 5 and 8 and with increasing LNP content. Emulsification at pH 3 and LNP cationization lead to droplet flocculation and rapid creaming. LNP application for emulsification, prior or simultaneously with nanocellulose, favors stability given the improved interactions with the oil phase. The Pickering emulsions can be freeze-dried, enabling the recovery of a solid macroporous foam that can act as adsorbent for pharmaceutical pollutants. Overall, the properties of nanocellulose-based Pickering emulsions and foams can be tailored by LNP addition. This strategy offers a unique, green approach to stabilize biphasic systems using bio-based nanomaterials without tedious and costly modification procedures.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10570-023-05399-y.

Impact of Processing Parameters on Contactless Emulsification via Corona Discharge

A contactless emulsification method is presented using corona discharge. The corona discharge forms using a pin-to-plate configuration, creating a non-uniform electric field. This results in a simultaneous electrohydrodynamic (EHD) pumping of silicone oil and an electroconvection of water droplets that accelerate and submerge inside the oil, leading to a continuous water-in-oil (W/O) emulsion formation process. The impact of the oil viscosity and corona generating AC and DC electric fields (i.e., voltage and frequency) on the characteristics of the emulsions is studied. The emulsification power consumption using the AC and DC electric fields is calculated and compared to traditional emulsion formation methods. While using the DC electric field results in the formation of uniform emulsions, the AC electric field is readily available and uses less power for the emulsification. This is facile, contactless, and energy-efficient for the continuous formation of W/O emulsions.

Pickering Emulsion Stabilized by β-Cyclodextrin and Cinnamaldehyde/β-Cyclodextrin Composite

A Pickering emulsion was prepared using β-cyclodextrin (β-CD) and a cinnamaldehyde (CA)/β-CD composite as emulsifiers and corn oil, camellia oil, lard oil, and fish oil as oil phases. It was confirmed that Pickering emulsions prepared with β-CD and CA/β-CD had good storage stability. The rheological experiments showed that all emulsions had G' values higher than G″, thus confirming their gel properties. The results of temperature scanning rheology experiments revealed that the Pickering emulsion prepared with β-CD and CA/β-CD composites had high stability, in the range of 20-65 °C. The chewing properties of Pickering emulsions prepared by β-CD and corn oil, camellia oil, lard, and herring oil were 8.02 ± 0.24 N, 7.94 ± 0.16 N, 36.41 ± 1.25 N, and 5.17 ± 0.13 N, respectively. The chewing properties of Pickering emulsions made with the CA/β-CD composite and corn oil, camellia oil, lard, and herring oil were 2.51 ± 0.05 N, 2.56 ± 0.05 N, 22.67 ± 1.70 N, 3.83 ± 0.29 N, respectively. The texture properties confirmed that the CA/β-CD-composite-stabilized-emulsion had superior palatability. After 28 days at 50 °C, malondialdehyde (MDA) was detected in the emulsion. Compared with the β-CD and CA + β-CD emulsion, the CA/β-CD composite emulsion had the lowest content of MDA (182.23 ± 8.93 nmol/kg). The in vitro digestion results showed that the free fatty acid (FFA) release rates of the CA/β-CD composite emulsion (87.49 ± 3.40%) were higher than those of the β-CD emulsion (74.32 ± 2.11%). This strategy provides ideas for expanding the application range of emulsifier particles and developing food-grade Pickering emulsions with antioxidant capacity.

Preparation and Emulsifying Properties of Carbon-Based Pickering Emulsifier

Water is increasingly being used as a solvent in place of organic solvent in order to meet the demand for green chemical synthesis. Nevertheless, many of the reaction substrates are organic matter, which have low water solubility, resulting in a low reaction interface and limiting the development of organic-water biphasic systems. A surfactant is typically added to the two-phase system to form an emulsion to increase the contact area between the organic phase and the water. Compared to ordinary emulsion stabilized with the surfactant, Pickering emulsion offers better adhesion resistance, biocompatibility, and environmental friendliness. It possesses unrivaled benefits as an emulsifier and catalyst in a two-phase interfacial catalysis system (PIC). In this study, the amine group (NNDB) was employed to alter the surface of graphene oxide (GO). A stable Pickering emulsion was created by adsorbing GO-NNDB on the toluene–water interface. It was determined that the emulsion system had good stability by analyzing digital photographs and microscope images of droplets at various temperatures, and fluorescence microscopy images of emulsion droplets created by both newly added and recovered emulsifiers. This work provided the groundwork for future applications of Pickering emulsion in interfacial catalysis.

Water-in-Water Emulsions Stabilized by Silica Janus Nanosheets

Water-in-water (w/w) emulsions have been recognized for their broad applications in foods, cosmetics, and biomedical engineering. In this work, silica Janus nanosheets (JNs) with polyacrylic acid (PAA) chains grafted on one surface via crushing functional silica foams, and used silica JNs as Pickering stabilizer to produce stable water-in-water (w/w) emulsions from the aqueous two-phase system (ATPS) containing methacrylic acid (MAA) and NaCl are prepared. The interfacial area of w/w emulsions increases linearly with the concentration of silica JNs, and the interfacial coverage of nanosheets is calculated to be about 98%. After polymerizing w/w emulsions prepared from MAA/NaCl ATPS, it is found that silica JNs are entrapped at the interface of w/w emulsions with the smooth PAA-grafted surface located toward MAA-rich phase due to their specific interaction. These results show that functional silica JNs can be used as a promising amphiphilic Pickering stabilizer to produce well-defined w/w emulsions for numerous application fields.

High Internal Phase Pickering Emulsion Stabilized by Lipase-Coated ZIF-8 Nanoparticles towards Recyclable Biphasic Biocatalyst

High internal phase Pickering emulsion (Pickering HIPE) stabilized by enzyme-decorated metal-organic frameworks (MOFs) nanoparticles is developed for biphasic biocatalysts to enhance lipase catalysis and recycling. Specifically, enzyme decorated nanoparticles are prepared via ZIF-8 physisorption of a model lipase Candida antarctica Lipase B (CALB), named ZIF-8@CALB, to be both Pickering stabilizer and catalytic sites. An oil-in-water (o/w) Pickering HIPE with oil/water volume ratio of 3 could then be fabricated by homogenizing p-nitrophenyl palmitate (p-NPP) n-heptane solution into the ZIF-8@CALB aqueous dispersion. The biocatalytic hydrolysis of p-NPP is conducted by just standing the biphasic system at room temperature. The Pickering HIPE system achieves a product conversion of up to 48.9% within 0.5 h, whereas the p-NPP n-heptane solution system containing free CALB only achieves a stable product conversion of 6.8% for the same time. Moreover, the ZIF@CALB could be recovered by a simple centrifugation at 800 rpm, and then reused in the next cycle. The hydrolysis equilibrium conversion rate of p-NPP keeps over 40% for all 8 cycles, reflecting the high catalytic efficiency and recyclability of the Pickering HIPE. This study provides a new opportunity in designing Enzyme-MOFs-based Pickering interfacial biocatalyst for practical applications.

Boosting Catalytic Selectivity through a Precise Spatial Control of Catalysts at Pickering Droplet Interfaces

Exploration of new methodologies to tune catalytic selectivity is a long-sought goal in catalytic community. In this work, oil-water interfaces of Pickering emulsions are developed to effectively regulate catalytic selectivity of hydrogenation reactions, which was achieved via a precise control of the spatial distribution of metal nanoparticles at the droplet interfaces. It was found that Pd nanoparticles located in the inner interfacial layer of Pickering droplets exhibited a significantly enhanced selectivity for p-chloroaniline (up to 99.6%) in the hydrogenation of p-chloronitrobenzene in comparison to those in the outer interfacial layer (63.6%) in pure water (68.5%) or in pure organic solvents (46.8%). Experimental and theoretical investigations indicated that such a remarkable interfacial microregion-dependent catalytic selectivity was attributed to the microenvironments of the coexistence of water and organic solvent at the droplet interfaces, which could provide unique interfacial hydrogen-bonding interactions and solvation effects so as to alter the adsorption patterns of p-chloronitrobenzene and p-chloroaniline on the Pd nanoparticles, thereby avoiding the unwanted contact of C-Cl bonds with the metal surfaces. Our strategy of precise spatial control of catalysts at liquid-liquid interfaces and the unprecedented interfacial effect reported here not only provide new insights into the liquid-liquid interfacial reactions but also open an avenue to boost catalytic selectivity.

Bacterial Cellulose Nanofibril-Based Pickering Emulsions: Recent Trends and Applications in the Food Industry

The Pickering emulsion stabilized by food-grade colloidal particles has developed rapidly in recent decades and attracts extensive attention for potential applications in the food industry. Bacterial cellulose nanofibrils (BCNFs), as green and sustainable colloidal nanoparticles derived from bacterial cellulose, have various advantages for Pickering emulsion stabilization and applications due to their unique properties, such as good amphiphilicity, a nanoscale fibrous network, a high aspect ratio, low toxicity, excellent biocompatibility, and sustainability. This review provides a comprehensive overview of the recent advances in the Pickering emulsion stabilized by BCNF particles, including the classification, preparation method, and physicochemical properties of diverse BCNF-based particles as Pickering stabilizers, as well as surface modifications with other substances to improve their emulsifying performance and functionality. Additionally, this paper highlights the stabilization mechanisms and provides potential food applications of BCNF-based Pickering emulsions, such as nutrient encapsulation and delivery, edible coatings and films, fat substitutes, etc. Furthermore, the safety issues and future challenges for the development and food-related applications of BCNFs-based Pickering emulsions are also outlined. This work will provide new insights and more ideas on the development and application of nanofibril-based Pickering emulsions for researchers.

Interfacial Assembly and Jamming of Soft Nanoparticle Surfactants into Colloidosomes and Structured Liquids

Nanoparticle surfactant (NPS) offers a powerful strategy to generate all-liquid constructs that integrate the inherent properties of the NPs into 3D architectures. Here, using the co-assembly of fluorescent polymeric nanoparticles and amine-functionalized polyhedral oligomeric silsesquioxane, the assembly and jamming behavior of a new type of NPS at the oil-water interface is uncovered. Unlike "solid" inorganic nanoparticles, "soft" polymeric nanoparticles can reorganize when jammed, leading to a relaxation and deformation of the interfacial assemblies, for example, the 3D printed sugar-coated haw stick-like liquid tubules. With NPS serving as emulsifiers, stable Pickering emulsions are prepared that can be converted into robust colloidosomes with pH responsiveness, showing numerous potential applications for encapsulation and controlled release.