1
|
Aleemardani M, Solouk A, Akbari S, Moeini M. A hydrogel-fiber-hydrogel composite scaffold based on silk fibroin with the dual-delivery of oxygen and quercetin. Biotechnol Bioeng 2023; 120:297-311. [PMID: 36224726 DOI: 10.1002/bit.28259] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/11/2022] [Revised: 09/04/2022] [Accepted: 10/08/2022] [Indexed: 11/10/2022]
Abstract
Supplying sufficient oxygen within the scaffolds is one of the essential hindrances in tissue engineering that can be resolved by oxygen-generating biomaterials (OGBs). Two main issues related to OGBs are controlling oxygenation and reactive oxygen species (ROS). To address these concerns, we developed a composite scaffold entailing three layers (hydrogel-electrospun fibers-hydrogel) with antioxidant and antibacterial properties. The fibers, the middle layer, reinforced the composite structure, enhancing the mechanical strength from 4.27 ± 0.15 to 8.27 ± 0.25 kPa; also, this layer is made of calcium peroxide and silk fibroin (SF) through electrospinning, which enables oxygen delivery. The first and third layers are physical SF hydrogels to control oxygen release, containing quercetin (Q), a nonenzymatic antioxidant. This composite scaffold resulted in almost more than 40 mmHg of oxygen release for at least 13 days, and compared with similar studies is in a high range. Here, Q was used for the first time for an OGB to scavenge the possible ROS. Q delivery not only led to antioxidant activity but also stabilized oxygen release and enhanced cell viability. Based on the given results, this composite scaffold can be introduced as a safe and controllable oxygen supplier, which is promising for tissue engineering applications, particularly for bone.
Collapse
Affiliation(s)
- Mina Aleemardani
- Biomaterials and Tissue Engineering Group, Department of Materials Science and Engineering, Kroto Research Institute, The University of Sheffield, Sheffield, UK
| | - Atefeh Solouk
- Biomedical Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
| | - Somaye Akbari
- Department of Textile Engineering, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
| | - Mohammad Moeini
- Biomedical Engineering Department, Amirkabir University of Technology (Tehran Polytechnic), Tehran, Iran
| |
Collapse
|
2
|
Hyaluronic Acid in Biomedical Fields: New Trends from Chemistry to Biomaterial Applications. Int J Mol Sci 2022; 23:ijms232214372. [PMID: 36430855 PMCID: PMC9695447 DOI: 10.3390/ijms232214372] [Citation(s) in RCA: 13] [Impact Index Per Article: 6.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/26/2022] [Revised: 11/15/2022] [Accepted: 11/17/2022] [Indexed: 11/22/2022] Open
Abstract
The aim of this review is to give an updated perspective about the methods for chemical modifications of hyaluronic acid (HA) toward the development of new applications in medical devices and material engineering. After a brief introduction on chemical, structural and biological features of this important natural polysaccharide, the most important methods for chemical and physical modifications are disclosed, discussing both on the formation of new covalent bonds and the interaction with other natural polysaccharides. These strategies are of paramount importance in the production of new medical devices and materials with improved properties. In particular, the use of HA in the development of new materials by means of additive manufacturing techniques as electro fluid dynamics, i.e., electrospinning for micro to nanofibres, and three-dimensional bioprinting is also discussed.
Collapse
|
3
|
Braťka P, Fenclová T, Hlinková J, Uherková L, Šebová E, Hefka Blahnová V, Hedvičáková V, Žižková R, Litvinec A, Trč T, Rosina J, Filová E. The Preparation and Biological Testing of Novel Wound Dressings with an Encapsulated Antibacterial and Antioxidant Substance. NANOMATERIALS (BASEL, SWITZERLAND) 2022; 12:3824. [PMID: 36364600 PMCID: PMC9656126 DOI: 10.3390/nano12213824] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 10/10/2022] [Revised: 10/25/2022] [Accepted: 10/26/2022] [Indexed: 06/16/2023]
Abstract
Chronic wounds represent a significant socio-economic problem, and the improvement of their healing is therefore an essential issue. This paper describes the preparation and biological properties of a novel functionalized nanofiber wound dressing consisting of a polycaprolactone nanofiber carrier modified by a drug delivery system, based on the lipid particles formed by 1-tetradecanol and encapsulated gentamicin and tocopherol acetate. The cytotoxicity of extracts was tested using a metabolic activity assay, and the antibacterial properties of the extracts were tested in vitro on the bacterial strains Staphylococcus aureus and Pseudomonas aeruginosa. The effect of the wound dressing on chronic wound healing was subsequently tested using a mouse model. Fourteen days after surgery, the groups treated by the examined wound cover showed a lower granulation, reepithelization, and inflammation score compared to both the uninfected groups, a lower dermis organization compared to the control, a higher scar thickness compared to the other groups, and a higher thickness of hypodermis and bacteria score compared to both the uninfected groups. This work demonstrates the basic parameters of the safety (biocompatibility) and performance (effect on healing) of the dressing as a medical device and indicates the feasibility of the concept of its preparation in outpatient conditions using a suitable functionalization device.
Collapse
Affiliation(s)
- Petr Braťka
- Faculty of Biomedical Engineering, Czech Technical University, Náměstí Sítná 3105, 27201 Kladno, Czech Republic
- Grade Medical s.r.o., Náměstí Sítná 3105, 27201 Kladno, Czech Republic
| | - Taťána Fenclová
- Grade Medical s.r.o., Náměstí Sítná 3105, 27201 Kladno, Czech Republic
| | - Jana Hlinková
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Lenka Uherková
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Eva Šebová
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Veronika Hefka Blahnová
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Věra Hedvičáková
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Radmila Žižková
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Andrej Litvinec
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| | - Tomáš Trč
- Grade Medical s.r.o., Náměstí Sítná 3105, 27201 Kladno, Czech Republic
| | - Jozef Rosina
- Faculty of Biomedical Engineering, Czech Technical University, Náměstí Sítná 3105, 27201 Kladno, Czech Republic
| | - Eva Filová
- Department of Tissue Engineering, Institute of Experimental Medicine of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
| |
Collapse
|
4
|
Polydopamine-Coated Poly-Lactic Acid Aerogels as Scaffolds for Tissue Engineering Applications. MOLECULES (BASEL, SWITZERLAND) 2022; 27:molecules27072137. [PMID: 35408538 PMCID: PMC9000627 DOI: 10.3390/molecules27072137] [Citation(s) in RCA: 6] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 03/01/2022] [Revised: 03/17/2022] [Accepted: 03/23/2022] [Indexed: 11/17/2022]
Abstract
Poly-L-lactic acid (PLLA) aerogel-based scaffolds were obtained from physical PLLA gels containing cyclopentanone (CPO) or methyl benzoate (BzOMe) molecules. An innovative single step method of solvent extraction, using supercritical CO2, was used to achieve cylindrical monolithic aerogels. The pore distribution and size, analyzed by SEM microscopy, were found to be related to the crystalline forms present in the physical nodes that hold the gels together, the stable α’-form and the metastable co-crystalline ε-form, detected in the PLLA/BzOMe and PLLA/CPO aerogels, respectively. A higher mechanical compressive strength was found for the PLLA/CPO aerogels, which exhibit a more homogenous porosity. In vitro biocompatibility tests also indicated that monolithic PLLA/CPO aerogels exhibited greater cell viability than PLLA/BzOMe aerogels. An improved biocompatibility of PLLA/CPO monolithic aerogels was finally observed by coating the surface of the aerogels with polydopamine (PDA) obtained by the in situ polymerization of dopamine (DA). The synergistic effect of biodegradable polyester (PLLA) and the biomimetic interface (PDA) makes this new 3D porous scaffold, with porosity and mechanical properties that are tunable based on the solvent used in the preparation process, attractive for tissue engineering applications.
Collapse
|
5
|
Neto MD, Stoppa A, Neto MA, Oliveira FJ, Gomes MC, Boccaccini AR, Levkin PA, Oliveira MB, Mano JF. Fabrication of Quasi-2D Shape-Tailored Microparticles using Wettability Contrast-Based Platforms. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2021; 33:e2007695. [PMID: 33644949 DOI: 10.1002/adma.202007695] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/11/2020] [Revised: 01/04/2021] [Indexed: 06/12/2023]
Abstract
The ability to fabricate materials with ultrathin architectures enables the breakthrough of low-dimensional structures with high surface area that showcase distinctive properties from their bulk counterparts. They are exploited in a wide range of fields, including energy harvesting, catalysis, and biomedicine. Despite such versatility, the fine tuning of the lateral dimensions and geometry of these structures remains challenging. Prepatterned platforms gain significant attention as enabling technologies to process materials with highly controlled shapes and dimensions. Herein, different nanometer-thick particles of various lateral sizes and geometries (e.g., squares, circles, triangles, hexagons) are processed with high precision and definition, taking advantage of the wettability contrast of oleophilic-oleophobic patterned surfaces. Quasi-2D polymeric microparticles with high shape- and size-fidelity can be retrieved as freestanding objects in a single step. These structures show cell-mediated pliability, and their integration in gravity-enforced human adipose-derived stem cell spheroids leads to an enhanced metabolic activity and a modulated secretion of proangiogenic factors.
Collapse
Affiliation(s)
- Mafalda D Neto
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, 3810-193, Portugal
| | - Aukha Stoppa
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, 3810-193, Portugal
- Institute of Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nuremberg, Erlangen, 91058, Germany
| | - Miguel A Neto
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, 3810-193, Portugal
| | - Filipe J Oliveira
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, 3810-193, Portugal
| | - Maria C Gomes
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, 3810-193, Portugal
| | - Aldo R Boccaccini
- Institute of Biomaterials, Department of Materials Science and Engineering, University of Erlangen-Nuremberg, Erlangen, 91058, Germany
| | - Pavel A Levkin
- Karlsruhe Institute of Technology, Institute of Biological and Chemical Systems (IBCS-FMS), Hermann-von-Helmholtz Pl.1, Eggenstein-Leopoldshafen, 76344, Germany
| | - Mariana B Oliveira
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, 3810-193, Portugal
| | - João F Mano
- Department of Chemistry, CICECO - Aveiro Institute of Materials, University of Aveiro, Campus Universitário de Santiago, Aveiro, 3810-193, Portugal
| |
Collapse
|
6
|
Zavan B, Gardin C, Guarino V, Rocca T, Cruz Maya I, Zanotti F, Ferroni L, Brunello G, Chachques JC, Ambrosio L, Gasbarro V. Electrospun PCL-Based Vascular Grafts: In Vitro Tests. NANOMATERIALS 2021; 11:nano11030751. [PMID: 33809791 PMCID: PMC8002398 DOI: 10.3390/nano11030751] [Citation(s) in RCA: 18] [Impact Index Per Article: 6.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 01/21/2021] [Revised: 02/17/2021] [Accepted: 03/03/2021] [Indexed: 12/18/2022]
Abstract
BACKGROUND Electrospun fibers have attracted a lot of attention from researchers due to their several characteristics, such as a very thin diameter, three-dimensional topography, large surface area, flexible surface, good mechanical characteristics, suitable for widespread applications. Indeed, electro-spinning offers many benefits, such as great surface-to-volume ratio, adjustable porosity, and the ability of imitating the tissue extra-cellular matrix. METHODS we processed Poly ε-caprolactone (PCL) via electrospinning for the production of bilayered tubular scaffolds for vascular tissue engineering application. Endothelial cells and fibroblasts were seeded into the two side of the scaffolds: endothelial cells onto the inner side composed of PCL/Gelatin fibers able to mimic the inner surface of the vessels, and fibroblasts onto the outer side only exposing PCL fibers. Extracellular matrix production and organization has been performed by means of classical immunofluorescence against collagen type I fibers, Scanning Electron-Microscopy (SEM) has been performed in order to evaluated ultrastructural morphology, gene expression by means gene expression has been performed to evaluate the phenotype of endothelial cells and fibroblasts. RESULTS AND CONCLUSION results confirmed that both cells population are able to conserve their phenotype colonizing the surface supporting the hypothesis that PCL scaffolds based on electrospun fibers should be a good candidate for vascular surgery.
Collapse
Affiliation(s)
- Barbara Zavan
- GVM Care & Research, Maria Cecilia Hospital, 48033 Cotignola, Italy; (C.G.); (L.F.)
- Translational Medicine Department, University of Ferrara, 44123 Ferrara, Italy;
- Correspondence:
| | - Chiara Gardin
- GVM Care & Research, Maria Cecilia Hospital, 48033 Cotignola, Italy; (C.G.); (L.F.)
| | - Vincenzo Guarino
- Institute of Polymers, Composites, and Biomaterials, National Research Council of Italy, Mostra d’Oltremare, Pad.20, V.le J.F.Kennedy 54, 80125 Naples, Italy; (V.G.); (I.C.M.); (L.A.)
| | - Tiberio Rocca
- Division of Internal Medicine, St. Anna Hospital, 44123 Ferrara, Italy; (T.R.); (V.G.)
| | - Iriczalli Cruz Maya
- Institute of Polymers, Composites, and Biomaterials, National Research Council of Italy, Mostra d’Oltremare, Pad.20, V.le J.F.Kennedy 54, 80125 Naples, Italy; (V.G.); (I.C.M.); (L.A.)
| | - Federica Zanotti
- Translational Medicine Department, University of Ferrara, 44123 Ferrara, Italy;
| | - Letizia Ferroni
- GVM Care & Research, Maria Cecilia Hospital, 48033 Cotignola, Italy; (C.G.); (L.F.)
| | - Giulia Brunello
- Department of Neurosciences, Dentistry Section, University of Padova, Via Giustiniani 2, 35128 Padova, Italy;
| | - Juan-Carlos Chachques
- Laboratory of Biosurgical Research (Alain Carpentier Foundation), Pompidu Hospital, University Paris Descartes, 75015 Paris, France;
| | - Luigi Ambrosio
- Institute of Polymers, Composites, and Biomaterials, National Research Council of Italy, Mostra d’Oltremare, Pad.20, V.le J.F.Kennedy 54, 80125 Naples, Italy; (V.G.); (I.C.M.); (L.A.)
| | - Vincenzo Gasbarro
- Division of Internal Medicine, St. Anna Hospital, 44123 Ferrara, Italy; (T.R.); (V.G.)
- Department of Medical Sciences, Ferrara University, 44123 Ferrara, Italy
| |
Collapse
|
7
|
Structural and functional properties of astrocytes on PCL based electrospun fibres. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2021; 118:111363. [DOI: 10.1016/j.msec.2020.111363] [Citation(s) in RCA: 14] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/25/2020] [Revised: 07/03/2020] [Accepted: 08/03/2020] [Indexed: 01/18/2023]
|
8
|
Comparative Study on Protein-Rich Electrospun Fibers for in Vitro Applications. Polymers (Basel) 2020; 12:polym12081671. [PMID: 32727080 PMCID: PMC7463886 DOI: 10.3390/polym12081671] [Citation(s) in RCA: 14] [Impact Index Per Article: 3.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/26/2020] [Revised: 07/23/2020] [Accepted: 07/24/2020] [Indexed: 11/16/2022] Open
Abstract
Electrospinning is the leading technology to fabricate fibrous scaffolds that mimic the architecture of the extracellular matrix of natural tissues. In order to improve the biological response, a consolidated trend involves the blending of synthetic polymers with natural proteins to form protein-rich fibers that include selected biochemical cues able to more actively support in vitro cell interaction. In this study, we compared protein-rich fibers fabricated via electrospinning by the blending of poly ε-caprolactone (PCL) with three different proteins, i.e., gelatin, zein, and keratin, respectively. We demonstrated that the peculiar features of the proteins used significantly influence the morphological properties, in terms of fiber size and distribution. Moreover, keratin drastically enhances the fiber hydrophilicity (water contact angle equal to 44.3° ± 3.9°) with positive effects on cell interaction, as confirmed by the higher proliferation of human mesenchymal stem cells (hMSC) until 7 days. By contrast, gelatin and zein not equally contribute to the fiber wettability (water contact angles equal to 95.2° ± 1.2° and 76.3° ± 4.0°, respectively) due to morphological constraints, i.e., broader fiber diameter distribution ascribable to the non-homogeneous presence of the protein along the fibers, or chemical constrains, i.e., large amount of non-polar amino acids. According to in vitro experimental studies, which included SEM and confocal microscopy analyses and vitality assay, we concluded that keratin is the most promising protein to be combined with PCL for the fabrication of biologically instructive fibers for in vitro applications.
Collapse
|
9
|
Arabiyat AS, Becerra-Bayona S, Kamaldinov T, Munoz-Pinto DJ, Hahn MS. Hydrogel Properties May Influence Mesenchymal Stem Cell Lineage Progression Through Modulating GAPDH Activity. REGENERATIVE ENGINEERING AND TRANSLATIONAL MEDICINE 2020. [DOI: 10.1007/s40883-020-00164-0] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/27/2022]
|
10
|
Guida P, Piscitelli E, Marrese M, Martino V, Cirillo V, Guarino V, Angeli E, Cocola C, Pelucchi P, Repetto L, Firpo G, Karnavas T, Gotte M, Gritzapis A, D'Albore M, Repetto D, Pezzuoli D, Missitzis I, Porta G, Bertalot G, Bellipanni G, Zucchi I, Ambrosio L, Valbusa U, Reinbold RA. Integrating Microstructured Electrospun Scaffolds in an Open Microfluidic System for in Vitro Studies of Human Patient-Derived Primary Cells. ACS Biomater Sci Eng 2020; 6:3649-3663. [PMID: 33463182 DOI: 10.1021/acsbiomaterials.0c00352] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
Abstract
Recent studies have suggested that microenvironmental stimuli play a significant role in regulating cellular proliferation and migration, as well as in modulating self-renewal and differentiation processes of mammary cells with stem cell (SCs) properties. Recent advances in micro/nanotechnology and biomaterial synthesis/engineering currently enable the fabrication of innovative tissue culture platforms suitable for maintenance and differentiation of SCs in vitro. Here, we report the design and fabrication of an open microfluidic device (OMD) integrating removable poly(ε-caprolactone) (PCL) based electrospun scaffolds, and we demonstrate that the OMD allows investigation of the behavior of human cells during in vitro culture in real time. Electrospun scaffolds with modified surface topography and chemistry can influence attachment, proliferation, and differentiation of mammary SCs and epigenetic mechanisms that maintain luminal cell identity as a function of specific morphological or biochemical cues imparted by tailor-made fiber post-treatments. Meanwhile, the OMD architecture allows control of cell seeding and culture conditions to collect more accurate and informative in vitro assays. In perspective, integrated systems could be tailor-made to mimic specific physiological conditions of the local microenvironment and then analyze the response from screening specific drugs for more effective diagnostics, long-term prognostics, and disease intervention in personalized medicine.
Collapse
Affiliation(s)
- Patrizia Guida
- Department of Physics, University of Genoa, via Dodecaneso 33, 16146 Genoa, Italy
| | - Eleonora Piscitelli
- Institute of Biomedical Technologies, National Research Council of Italy, via F.lli Cervi 93, 20090 Segrate, Milan, Italy
| | - Marica Marrese
- Institute of Composite and Biomedical Materials, National Research Council of Italy, Mostra D'Oltremare, Pad. 20, viale Kennedy 54, 80125 Naples, Italy
| | - Valentina Martino
- Institute of Biomedical Technologies, National Research Council of Italy, via F.lli Cervi 93, 20090 Segrate, Milan, Italy
| | - Valentina Cirillo
- Institute of Composite and Biomedical Materials, National Research Council of Italy, Mostra D'Oltremare, Pad. 20, viale Kennedy 54, 80125 Naples, Italy
| | - Vincenzo Guarino
- Institute for Polymers, Composites & Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, viale Kennedy 54, 80125 Naples, Italy
| | - Elena Angeli
- Department of Physics, University of Genoa, via Dodecaneso 33, 16146 Genoa, Italy
| | - Cinzia Cocola
- Institute of Biomedical Technologies, National Research Council of Italy, via F.lli Cervi 93, 20090 Segrate, Milan, Italy.,Consorzio Italbiotech, via Fantoli 15/16, 20138 Milan, Italy
| | - Paride Pelucchi
- Institute of Biomedical Technologies, National Research Council of Italy, via F.lli Cervi 93, 20090 Segrate, Milan, Italy
| | - Luca Repetto
- Department of Physics, University of Genoa, via Dodecaneso 33, 16146 Genoa, Italy
| | - Giuseppe Firpo
- Department of Physics, University of Genoa, via Dodecaneso 33, 16146 Genoa, Italy
| | - Theodoros Karnavas
- Columbia University, Department of Genetics & Development, New York, 10032 United States
| | - Martin Gotte
- Department of Gynecology and Obstetrics, Münster University Hospital, 48149 Münster, Germany
| | - Angelos Gritzapis
- Department of Breast Cancer Surgery, Hospital "Agios Savvas", Leoforos Alexandras Avenue, 171, 11522 Athens, Greece
| | - Marietta D'Albore
- Institute of Composite and Biomedical Materials, National Research Council of Italy, Mostra D'Oltremare, Pad. 20, viale Kennedy 54, 80125 Naples, Italy
| | - Diego Repetto
- Department of Physics, University of Genoa, via Dodecaneso 33, 16146 Genoa, Italy
| | - Denise Pezzuoli
- Department of Physics, University of Genoa, via Dodecaneso 33, 16146 Genoa, Italy
| | - Ioannis Missitzis
- Department of Breast Cancer Surgery, Hospital "Agios Savvas", Leoforos Alexandras Avenue, 171, 11522 Athens, Greece
| | - Giovanni Porta
- Department of Medicine and Surgery, University of Insubria, Varese, Italy
| | - Giovanni Bertalot
- IEO, European Institute of Oncology IRCCS, via G Ripamonti, 435, 20141 Milan, Italy
| | - Gianfranco Bellipanni
- Center for Biotechnology, Sbarro Institute for Research and Molecular Medicine and Department of Biology, Temple University, Philadelphia 19122, United States
| | - Ileana Zucchi
- Institute of Biomedical Technologies, National Research Council of Italy, via F.lli Cervi 93, 20090 Segrate, Milan, Italy
| | - Luigi Ambrosio
- Institute for Polymers, Composites & Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, viale Kennedy 54, 80125 Naples, Italy
| | - Ugo Valbusa
- Department of Physics, University of Genoa, via Dodecaneso 33, 16146 Genoa, Italy
| | - Rolland A Reinbold
- Institute of Biomedical Technologies, National Research Council of Italy, via F.lli Cervi 93, 20090 Segrate, Milan, Italy
| |
Collapse
|
11
|
Zuppolini S, Cruz-Maya I, Guarino V, Borriello A. Optimization of Polydopamine Coatings onto Poly-ε-Caprolactone Electrospun Fibers for the Fabrication of Bio-Electroconductive Interfaces. J Funct Biomater 2020; 11:E19. [PMID: 32192126 PMCID: PMC7151565 DOI: 10.3390/jfb11010019] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/07/2020] [Revised: 03/12/2020] [Accepted: 03/13/2020] [Indexed: 01/28/2023] Open
Abstract
In recent years, mussel adhesive proteins have attracted much attention because they can form strong adhesive interface interactions with various substrates in a wet environment. Inspired by their catechol- and amine-based molecular structure, polydopamine (PDA), a dopamine derived synthetic eumelanin polymer, was recognized as a suitable bio-interface coating. PDA was successfully used to improve adhesion due to the availability of copious functional groups for covalently immobilizing biomolecules and anchoring reactive species and ions. Recently, it has been demonstrated that PDA and its derivatives can be successfully used for the surface modification of implants interfaces to modulate in vitro cellular responses in order to enhance the in vivo functionality of biomedical implants (i.e., prosthesis). Herein, we propose the development of multifunctional scaffolds based on polyε-caprolactone (PCL) electrospun fibers coated with PDA via electro fluid dynamic methods, by optimizing polymerization/oxidation reactions capable of driving PDA self-assembly, and, ultimately, investigating the effects on cell response. Morphological analyses have confirmed the possibility to obtain different surface topographies as a function of the coating process while in vitro studies proved the ability of PDA coating to interact with cells no compromising in vitro viability. In perspective, in vitro conductive properties of fibers will be further investigated in order to validate their promising use as bioconductive interfaces for tissue engineering applications.
Collapse
Affiliation(s)
| | | | - Vincenzo Guarino
- Institute for Polymers, Composites and Biomaterials (IPCB)—National Research Council of Italy, V.le Kennedy 54, 80125 Naples, Italy; (S.Z.); (I.C.-M.)
| | - Anna Borriello
- Institute for Polymers, Composites and Biomaterials (IPCB)—National Research Council of Italy, V.le Kennedy 54, 80125 Naples, Italy; (S.Z.); (I.C.-M.)
| |
Collapse
|
12
|
Cruz-Maya I, Guarino V, Almaguer-Flores A, Alvarez-Perez MA, Varesano A, Vineis C. Highly polydisperse keratin rich nanofibers: Scaffold design and in vitro characterization. J Biomed Mater Res A 2019; 107:1803-1813. [PMID: 31004452 DOI: 10.1002/jbm.a.36699] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 12/21/2018] [Revised: 03/11/2019] [Accepted: 04/16/2019] [Indexed: 02/03/2023]
Abstract
The use of bioactive proteins such as keratin has been successfully explored to improve the biological interface of scaffolds with cells during the tissue regeneration. In this work, it is optimized the fabrication of nanofibers combining wool keratin extracted by sulfitolysis, with polycaprolactone (PCL) in order to design bicomponent fibrous matrices able to exert a self-adapting pattern of signals-morphological, chemical, or physical-confined at the single fiber level, to influence cell and bacteria interactions. It is demonstrated that the blending of highly polydisperse keratin with PCL (50:50) improves the stability of the electrospinning process, promoting the formation of nanofibers-144.1 ± 43.9 nm-without the formation of defects (i.e., beads, ribbons) typically recognized in the fabrication of keratin ones. Moreover, keratin drastically increases the fiber hydrophilicity-compared with PCL fiber alone-thus improving the hMSC adhesion and in vitro proliferation until 14 days. Moreover, the growth of bacterial strains (i.e., Escherichia coli and Staphylococcus aureus) seems to be not specifically inhibited by the contribution of keratin, so that the integration of further selected compounds (i.e., metal ions) is suggested to more efficiently fight against bacteria resistance, to make them suitable for the regeneration of different interfaces and soft tissues (i.e., skin and cornea). © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 107A: 1803-1813, 2019.
Collapse
Affiliation(s)
- Iriczalli Cruz-Maya
- IPCB/CNR, Institute of Polymers, Composites and Biomaterials - Consiglio Nazionale delle Ricerche, Mostra D'Oltremare, Pad. 20, V.le J.F. Kennedy 54, 80125, Naples, Italy.,Department of Chemical, Materials and Industrial Production Engineering, University of Naples Federico II, Naples, Italy
| | - Vincenzo Guarino
- IPCB/CNR, Institute of Polymers, Composites and Biomaterials - Consiglio Nazionale delle Ricerche, Mostra D'Oltremare, Pad. 20, V.le J.F. Kennedy 54, 80125, Naples, Italy
| | - Argelia Almaguer-Flores
- Tissue Bioengineering Laboratory, DEPeI, School of Dentistry, Universidad Nacional Autonoma de Mexico (UNAM), Circuito Exterior s/n C.P., 04510, Coyoacán, Mexico, DF, Mexico
| | - Marco A Alvarez-Perez
- Tissue Bioengineering Laboratory, DEPeI, School of Dentistry, Universidad Nacional Autonoma de Mexico (UNAM), Circuito Exterior s/n C.P., 04510, Coyoacán, Mexico, DF, Mexico
| | - Alessio Varesano
- ISMAC/CNR, Institute for Macromolecular Studies - Consiglio Nazionale delle Ricerche, C.so G. Pella 16, Biella, Italy
| | - Claudia Vineis
- ISMAC/CNR, Institute for Macromolecular Studies - Consiglio Nazionale delle Ricerche, C.so G. Pella 16, Biella, Italy
| |
Collapse
|
13
|
Abdul Khodir WKW, Abdul Razak AH, Ng MH, Guarino V, Susanti D. Encapsulation and Characterization of Gentamicin Sulfate in the Collagen Added Electrospun Nanofibers for Skin Regeneration. J Funct Biomater 2018; 9:jfb9020036. [PMID: 29783681 PMCID: PMC6023495 DOI: 10.3390/jfb9020036] [Citation(s) in RCA: 38] [Impact Index Per Article: 6.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/22/2018] [Revised: 04/26/2018] [Accepted: 05/07/2018] [Indexed: 12/31/2022] Open
Abstract
In the current practice, the clinical use of conventional skin substitutes such as autogenous skin grafts have shown several problems, mainly with respect to limited sources and donor site morbidity. In order to overcome these limitations, the use of smart synthetic biomaterials is tremendously diffusing as skin substitutes. Indeed, engineered skin grafts or analogues frequently play an important role in the treatment of chronic skin wounds, by supporting the regeneration of newly formed tissue, and at the same time preventing infections during the long-term treatment. In this context, natural proteins such as collagen—natively present in the skin tissue—embedded in synthetic polymers (i.e., PCL) allow the development of micro-structured matrices able to mimic the functions and to structure of the surrounding extracellular matrix. Moreover, the encapsulation of drugs, such as gentamicin sulfate, also improves the bioactivity of nanofibers, due to the efficient loading and a controlled drug release towards the site of interest. Herein, we have done a preliminary investigation on the capability of gentamicin sulfate, loaded into collagen-added nanofibers, for the controlled release in local infection treatments. Experimental studies have demonstrated that collagen added fibers can be efficaciously used to administrate gentamicin for 72 h without any toxic in vitro response, thus emerging as a valid candidate for the therapeutic treatment of infected wounds.
Collapse
Affiliation(s)
- Wan Khartini Wan Abdul Khodir
- Department of Chemistry, Kulliyyah of Science, International Islamic University of Malaysia Kuantan Campus, Bandar Indera Mahkota, Kuantan 25200, Pahang, Malaysia.
| | - Abdul Hakim Abdul Razak
- Department of Chemistry, Kulliyyah of Science, International Islamic University of Malaysia Kuantan Campus, Bandar Indera Mahkota, Kuantan 25200, Pahang, Malaysia.
| | - Min Hwei Ng
- Tissue Engineering Centre, Universiti Kebangsaan Malaysia Medical Centre, Kuala Lumpur 56000, Malaysia.
| | - Vincenzo Guarino
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, V. le Kennedy 54, 80125 Naples, Italy.
| | - Deny Susanti
- Department of Chemistry, Kulliyyah of Science, International Islamic University of Malaysia Kuantan Campus, Bandar Indera Mahkota, Kuantan 25200, Pahang, Malaysia.
| |
Collapse
|
14
|
Fasolino I, Guarino V, Marrese M, Cirillo V, Vallifuoco M, Tamma ML, Vassallo V, Bracco A, Calise F, Ambrosio L. HepG2 and human healthy hepatocyte in vitro culture and co-culture in PCL electrospun platforms. ACTA ACUST UNITED AC 2017; 13:015017. [PMID: 28901955 DOI: 10.1088/1748-605x/aa8c51] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/11/2022]
Abstract
The discovery of new drugs to treat pathological cells in the case of aggressive liver primary cancer is imposing the identification of high-throughput screening systems to predict the in vivo response of new therapeutic molecules, in order to reduce current use of animals and drug testing costs. Recently, micro/nanostructured scaffolds have been adopted to reproduce the hepatic microenvironment due to their higher similarity to the biological niche with respect to the traditional two-dimensional culture plate, so providing novel in vitro models for reliably understanding molecular mechanisms related to cancer cells activity. Herein, we propose the study of electrospun scaffolds made of polycaprolactone as in vitro model that can mimic the morphological organization of native extracellular matrix and the co-culture of hepatic cell lines-i.e., HepG2, human healthy hepatocytes (HHH). The micro- and nano-scale morphological features of fibers with diameter equal to (3.22 ± 0.42) μm and surface roughness of (17.84 ± 4.43) nm-allow the reproduction of the in vivo scenario influencing the adhesion and proliferation rate of the cultured cells. A much lower proliferation rate is observed for the HepG2 cells compared to the HHH cells, when cultured on the fibrous scaffolds over a time course of 4 weeks. Moreover, results on oxidative stress mechanisms indicate an antioxidant effect of fibers mainly in the case of co-colture, thus suggesting a promising use as new in vitro models to explore alternative therapeutic strategies in hepatocarcinoma treatment.
Collapse
Affiliation(s)
- I Fasolino
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, V. le Kennedy 54, I-80125, Naples, Italy
| | | | | | | | | | | | | | | | | | | |
Collapse
|
15
|
Marrese M, Guarino V, Fasolino I, Cirillo V, Ambrosio L. Degradation and early in vitro activity of healthy hepatocytes onto bicomponent electrospun fibers. INT J POLYM MATER PO 2017. [DOI: 10.1080/00914037.2017.1405347] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
Affiliation(s)
- Marica Marrese
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| | - Vincenzo Guarino
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| | - Ines Fasolino
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| | - Valentina Cirillo
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| | - Luigi Ambrosio
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Naples, Italy
| |
Collapse
|
16
|
Papa A, Guarino V, Cirillo V, Oliviero O, Ambrosio L. Optimization of Bicomponent Electrospun Fibers for Therapeutic Use: Post-Treatments to Improve Chemical and Biological Stability. J Funct Biomater 2017; 8:jfb8040047. [PMID: 29035303 PMCID: PMC5748554 DOI: 10.3390/jfb8040047] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/19/2017] [Revised: 10/10/2017] [Accepted: 10/10/2017] [Indexed: 11/16/2022] Open
Abstract
Bicomponent electrospun nanofibers based on the combination of synthetic (i.e., aliphatic polyesters such as polycaprolactone (PCL)) and natural proteins (i.e., gelatin) have been extensively investigated as temporary platforms to instruct cells by the release of molecular/pharmaceutical signals for the regeneration of several tissues. Here, water soluble proteins (i.e., gelatin), strictly embedded to PCL, act as carriers of bioactive molecules, thus improving bioavailability and supporting cell activities during in vitro regeneration. However, these proteins are rapidly digested by enzymes, locally produced by many different cell types, both in vitro and in vivo, with significant drawbacks in the control of molecular release. Hence, we have investigated three post-processing strategies based on the use of different crosslinking agents-(1-ethyl-3-(3-dimethylaminopropyl)carbodiimide hydrochloride) (EDC), glyceraldehyde (GC), and 1,4-butanediol diglycidyl ether (BDDGE)-to delay the dissolution time of gelatin macromolecules from bicomponent fibers. All of the qualitative (i.e., SEM, TGA) and quantitative (i.e., Trinitrobenzene sulfonate (TNBS) and bicinchoninic acid (BCA) assays) morphological/chemical analyses as well as biocompatibility assays indicate that EDC crosslinking improves the chemical stability of bicomponent fibers at 37 °C and provides a more efficient encapsulation and controlled sustained release of drug, thus resulting in the best post-treatment to design bio-inspired fibrous platforms for the extended in vitro release of drugs.
Collapse
Affiliation(s)
- Antonio Papa
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, V. le Kennedy 54, 80125 Naples, Italy.
- IMAST Scarl, P.za Bovio 22, 80133 Naples, Italy.
| | - Vincenzo Guarino
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, V. le Kennedy 54, 80125 Naples, Italy.
| | - Valentina Cirillo
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, V. le Kennedy 54, 80125 Naples, Italy.
| | - Olimpia Oliviero
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, V. le Kennedy 54, 80125 Naples, Italy.
| | - Luigi Ambrosio
- Institute for Polymers, Composites and Biomaterials, National Research Council of Italy, Mostra d'Oltremare, Pad. 20, V. le Kennedy 54, 80125 Naples, Italy.
| |
Collapse
|
17
|
Marrese M, Guarino V, Ambrosio L. Atomic Force Microscopy: A Powerful Tool to Address Scaffold Design in Tissue Engineering. J Funct Biomater 2017; 8:E7. [PMID: 28208801 PMCID: PMC5371880 DOI: 10.3390/jfb8010007] [Citation(s) in RCA: 61] [Impact Index Per Article: 8.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/04/2016] [Revised: 02/07/2017] [Accepted: 02/08/2017] [Indexed: 11/16/2022] Open
Abstract
Functional polymers currently represent a basic component of a large range of biological and biomedical applications including molecular release, tissue engineering, bio-sensing and medical imaging. Advancements in these fields are driven by the use of a wide set of biodegradable polymers with controlled physical and bio-interactive properties. In this context, microscopy techniques such as Atomic Force Microscopy (AFM) are emerging as fundamental tools to deeply investigate morphology and structural properties at micro and sub-micrometric scale, in order to evaluate the in time relationship between physicochemical properties of biomaterials and biological response. In particular, AFM is not only a mere tool for screening surface topography, but may offer a significant contribution to understand surface and interface properties, thus concurring to the optimization of biomaterials performance, processes, physical and chemical properties at the micro and nanoscale. This is possible by capitalizing the recent discoveries in nanotechnologies applied to soft matter such as atomic force spectroscopy to measure surface forces through force curves. By tip-sample local interactions, several information can be collected such as elasticity, viscoelasticity, surface charge densities and wettability. This paper overviews recent developments in AFM technology and imaging techniques by remarking differences in operational modes, the implementation of advanced tools and their current application in biomaterials science, in terms of characterization of polymeric devices in different forms (i.e., fibres, films or particles).
Collapse
Affiliation(s)
- Marica Marrese
- Faculty of Sciences, Biophotonics and Medical Imaging group and Laser Lab, VU University Amsterdam, De Boelelaan 1081 HV Amsterdam, The Netherlands.
| | - Vincenzo Guarino
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le Kennedy 54, Pad 20, Mostra d'Oltremare, Naples 80125, Italy.
| | - Luigi Ambrosio
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le Kennedy 54, Pad 20, Mostra d'Oltremare, Naples 80125, Italy.
| |
Collapse
|
18
|
Altobelli R, Guarino V, Ambrosio L. Micro- and nanocarriers by electrofludodynamic technologies for cell and molecular therapies. Process Biochem 2016. [DOI: 10.1016/j.procbio.2016.09.002] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Submit a Manuscript] [Subscribe] [Scholar Register] [Indexed: 02/06/2023]
|
19
|
Guarino V, Ambrosio L. Electrofluidodynamics: exploring a new toolbox to design biomaterials for tissue regeneration and degeneration. Nanomedicine (Lond) 2016; 11:1515-8. [DOI: 10.2217/nnm-2016-0108] [Citation(s) in RCA: 23] [Impact Index Per Article: 2.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Affiliation(s)
- Vincenzo Guarino
- Institute for Polymers, Composites & Biomaterials, National Research Council of Italy, V.le Kennedy 54, 80125, Naples, Italy
| | - Luigi Ambrosio
- Department of Chemical Sciences & Materials Technology, National Research Council of Italy, P.le A. Moro, 7, 00185, Rome, Italy
| |
Collapse
|
20
|
Salerno A, Guarino V, Oliviero O, Ambrosio L, Domingo C. Bio-safe processing of polylactic-co-caprolactone and polylactic acid blends to fabricate fibrous porous scaffolds for in vitro mesenchymal stem cells adhesion and proliferation. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2016; 63:512-21. [PMID: 27040246 DOI: 10.1016/j.msec.2016.03.018] [Citation(s) in RCA: 15] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Received: 06/19/2015] [Revised: 02/09/2016] [Accepted: 03/06/2016] [Indexed: 10/22/2022]
Abstract
In this study, the design and fabrication of porous scaffolds, made of blends of polylactic-co-caprolactone (PLC) and polylactic acid (PLA) polymers, for tissue engineering applications is reported. The scaffolds are prepared by means of a bio-safe thermally induced phase separation (TIPS) approach with or without the addition of NaCl particles used as particulate porogen. The scaffolds are characterized to assess their crystalline structure, morphology and mechanical properties, and the texture of the pores and the pore size distribution. Moreover, in vitro human mesenchymal stem cells (hMSCs) culture tests have been carried out to demonstrate the biocompatibility of the scaffolds. The results of this study demonstrate that all of the scaffold materials processed by means of TIPS process are semi-crystalline. Furthermore, the blend composition affected polymer crystallization and, in turn, the nano and macro-structural properties of the scaffolds. Indeed, neat PLC and neat PLA crystallize into globular and randomly arranged sub micro-size scale fibrous conformations, respectively. Concomitantly, the addition of NaCl particles during the fabrication route allows for the creation of an interconnected network of large pores inside the primary structure while resulted in a significant decrease of scaffolds mechanical response. Finally, the results of cell culture tests demonstrate that both the micro and macro-structure of the scaffold affect the in vitro hMSCs adhesion and proliferation.
Collapse
Affiliation(s)
- Aurelio Salerno
- Centre for Advanced Biomaterials for Health Care, Istituto Italiano di Tecnologia, Largo Barsanti e Matteucci 53, 80125 Napoli, Italy; Institute of Materials Science of Barcelona (ICMAB-CSIC), Campus de la UAB s/n, Bellaterra 08193, Spain.
| | - Vincenzo Guarino
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le Kennedy 54, Pad 20, Mostra d'Oltremare, 80125 Naples, Italy
| | - Olimpia Oliviero
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le Kennedy 54, Pad 20, Mostra d'Oltremare, 80125 Naples, Italy
| | - Luigi Ambrosio
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le Kennedy 54, Pad 20, Mostra d'Oltremare, 80125 Naples, Italy
| | - Concepción Domingo
- Institute of Materials Science of Barcelona (ICMAB-CSIC), Campus de la UAB s/n, Bellaterra 08193, Spain
| |
Collapse
|
21
|
Guarino V, Cirillo V, Ambrosio L. Bicomponent electrospun scaffolds to design extracellular matrix tissue analogs. Expert Rev Med Devices 2015; 13:83-102. [PMID: 26619260 DOI: 10.1586/17434440.2016.1126505] [Citation(s) in RCA: 35] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/01/2023]
Abstract
In the last decade, bicomponent fibers have been proposed to fabricate bio-inspired systems for tissue repair, regenerative medicine, medical healthcare and clinical applications. In comparison with monocomponent fibers, key advantage concerns their ability of self-adapting to the physiological conditions through an extended pattern of signals--morphological, chemical and physical ones--confined at the single fiber level. Hydrophobic/hydrophilic phases may be variously organized by tuneable processing modes (i.e., blending, core/shell, interweaving) thus offering different benefits in terms of biological activity, fluid sorption and molecular transport properties (first generation). The possibility to efficiently graft cell-adhesive proteins and peptide sequences onto the fiber surface mediated by spacers or impregnating hydrogels allows to trigger cell late activities by a controlled and sustained release in vitro of specific biomolecules (i.e., morphogens, growth factors). Here, we introduce an overview of current approaches based on bicomponent fiber use as extra cellular matrix analogs with cell-instructive functions and hierarchal organization of living tissues.
Collapse
Affiliation(s)
- Vincenzo Guarino
- a Institute for Polymers, Composites and Biomaterials, Department of Chemical Sciences & Materials Technology , National Research Council of Italy , 80125 Naples , Italy
| | - Valentina Cirillo
- a Institute for Polymers, Composites and Biomaterials, Department of Chemical Sciences & Materials Technology , National Research Council of Italy , 80125 Naples , Italy
| | - Luigi Ambrosio
- a Institute for Polymers, Composites and Biomaterials, Department of Chemical Sciences & Materials Technology , National Research Council of Italy , 80125 Naples , Italy
| |
Collapse
|
22
|
Bracaglia LG, Fisher JP. Extracellular Matrix-Based Biohybrid Materials for Engineering Compliant, Matrix-Dense Tissues. Adv Healthc Mater 2015; 4:2475-87. [PMID: 26227679 DOI: 10.1002/adhm.201500236] [Citation(s) in RCA: 32] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/02/2015] [Revised: 06/23/2015] [Indexed: 12/24/2022]
Abstract
An ideal tissue engineering scaffold should not only promote, but take an active role in, constructive remodeling and formation of site appropriate tissue. Extracellular matrix (ECM)-derived proteins provide unmatched cellular recognition, and therefore influence cellular response towards predicted remodeling behaviors. Materials built with only these proteins, however, can degrade rapidly or begin too weak to substitute for compliant, matrix-dense tissues. The focus of this Progress Report is on biohybrid materials that incorporate polymer components with ECM-derived proteins, to produce a substrate with desired mechanical and degradation properties, as well as actively guide tissue remodeling. Materials are described through four fabrication methods: 1) polymer and ECM-protein fibers woven together, 2) polymer and ECM proteins combined in a bilayer, 3) cell-built ECM on polymer scaffold, and 4) ECM proteins and polymers combined in a single hydrogel. Scaffolds from each fabrication method can achieve characteristics suitable for different types of tissue. In vivo testing has shown progressive remodeling in injury models, and suggests ECM-based biohybrid materials promote a prohealing immune response over single component alternatives. The prohealing immune response is associated with lasting success and long term host maintenance of the implant.
Collapse
Affiliation(s)
- Laura G. Bracaglia
- Fischell Department of Bioengineering; University of Maryland; 3238 Jeong H. Kim Engineering Building College Park MD 20742 USA
| | - John P. Fisher
- Fischell Department of Bioengineering; University of Maryland; 3238 Jeong H. Kim Engineering Building College Park MD 20742 USA
| |
Collapse
|
23
|
Guarino V, Altobelli R, Cirillo V, Cummaro A, Ambrosio L. Additive electrospraying: a route to process electrospun scaffolds for controlled molecular release. POLYM ADVAN TECHNOL 2015. [DOI: 10.1002/pat.3588] [Citation(s) in RCA: 35] [Impact Index Per Article: 3.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Affiliation(s)
- Vincenzo Guarino
- Institute for Polymers, Composites and Biomaterials; Department of Chemical Science and Materials Technology, National Research Council of Italy; V.le Kennedy 54, Mostra D'Oltremare, Pad.20 80125 Naples Italy
- Department of Chemical Sciences and Materials Technology; National Research Council of Italy; 80125 Naples Italy
| | - Rosaria Altobelli
- Institute for Polymers, Composites and Biomaterials; Department of Chemical Science and Materials Technology, National Research Council of Italy; V.le Kennedy 54, Mostra D'Oltremare, Pad.20 80125 Naples Italy
- Department of Chemical Sciences and Materials Technology; National Research Council of Italy; 80125 Naples Italy
| | - Valentina Cirillo
- Institute for Polymers, Composites and Biomaterials; Department of Chemical Science and Materials Technology, National Research Council of Italy; V.le Kennedy 54, Mostra D'Oltremare, Pad.20 80125 Naples Italy
- Department of Chemical Sciences and Materials Technology; National Research Council of Italy; 80125 Naples Italy
| | - Annunziata Cummaro
- Institute for Polymers, Composites and Biomaterials; Department of Chemical Science and Materials Technology, National Research Council of Italy; V.le Kennedy 54, Mostra D'Oltremare, Pad.20 80125 Naples Italy
- Department of Chemical Sciences and Materials Technology; National Research Council of Italy; 80125 Naples Italy
| | - Luigi Ambrosio
- Institute for Polymers, Composites and Biomaterials; Department of Chemical Science and Materials Technology, National Research Council of Italy; V.le Kennedy 54, Mostra D'Oltremare, Pad.20 80125 Naples Italy
- Department of Chemical Sciences and Materials Technology; National Research Council of Italy; 80125 Naples Italy
| |
Collapse
|
24
|
Seo J, Lee JS, Lee K, Kim D, Yang K, Shin S, Mahata C, Jung HB, Lee W, Cho SW, Lee T. Switchable water-adhesive, superhydrophobic palladium-layered silicon nanowires potentiate the angiogenic efficacy of human stem cell spheroids. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2014; 26:7043-50. [PMID: 25183387 DOI: 10.1002/adma.201402273] [Citation(s) in RCA: 33] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/21/2014] [Revised: 07/26/2014] [Indexed: 05/10/2023]
Abstract
A switchable water-adhesive, super-hydrophobic nanowire surface is developed for the formation of functional stem cell spheroids. The sizes of hADSC spheroids are readily controllable on the surface. Our surface increases cell-cell and cell-matrix interaction, which improves viability and paracrine secretion of the spheroids. Accordingly, the hADSC spheroids produced on the surface exhibit significantly enhanced angiogenic efficacy.
Collapse
Affiliation(s)
- Jungmok Seo
- Nanobio Device Laboratory, School of Electrical and Electronic Engineering, Yonsei University, 50 Yonsei-ro, Seodaemun-Gu, Seoul, 120-749, Republic of Korea
| | | | | | | | | | | | | | | | | | | | | |
Collapse
|
25
|
Cirillo V, Guarino V, Alvarez-Perez MA, Marrese M, Ambrosio L. Optimization of fully aligned bioactive electrospun fibers for "in vitro" nerve guidance. JOURNAL OF MATERIALS SCIENCE. MATERIALS IN MEDICINE 2014; 25:2323-2332. [PMID: 24737088 DOI: 10.1007/s10856-014-5214-4] [Citation(s) in RCA: 30] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/17/2013] [Accepted: 03/28/2014] [Indexed: 06/03/2023]
Abstract
Complex architecture of natural tissues such as nerves requires the use of multifunctional scaffolds with peculiar topological and biochemical signals able to address cell behavior towards specific events at the cellular (microscale) and macromolecular (nanoscale) level. In this context, the electrospinning technique is useful to generate fiber assemblies having peculiar fiber diameters at the nanoscale and patterned by unidirectional ways, to facilitate neurite extension via contact guidance. Following a bio-mimetic approach, fully aligned polycaprolactone fibers blended with gelatin macromolecules have been fabricated as potential bioactive substrate for nerve regeneration. Morphological and topographic aspects of electrospun fibers assessed by SEM/AFM microscopy supported by image analyses elaboration allow estimating an increase of fully aligned fibers from 5 to 39% as collector rotating rate increases from 1,000 to 3,000 rpm. We verify that fully alignment of fibers positively influences in vitro response of hMSC and PC-12 cells in neurogenic way. Immunostaining images show that the presence of topological defects, i.e., kinks--due to more frequent fiber crossing--in the case of randomly organized fiber assembly concurs to interfere with proper neurite outgrowth. On the contrary, fully aligned fibers without kinks offer a more efficient contact guidance to direct the orientation of nerve cells along the fibers respect to randomly organized ones, promoting a high elongation of neurites at 7 days and the formation of bipolar extensions. So, this confirms that the topological cue of fully alignment of fibers elicits a favorable environment for nerve regeneration.
Collapse
Affiliation(s)
- Valentina Cirillo
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy, V.le Kennedy 54, Pad 20, Mostra d'Oltremare, 80125, Naples, Italy
| | | | | | | | | |
Collapse
|
26
|
Guarino V, Cirillo V, Altobelli R, Ambrosio L. Polymer-based platforms by electric field-assisted techniques for tissue engineering and cancer therapy. Expert Rev Med Devices 2014; 12:113-29. [DOI: 10.1586/17434440.2014.953058] [Citation(s) in RCA: 48] [Impact Index Per Article: 4.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/17/2023]
|
27
|
Cirillo V, Clements BA, Guarino V, Bushman J, Kohn J, Ambrosio L. A comparison of the performance of mono- and bi-component electrospun conduits in a rat sciatic model. Biomaterials 2014; 35:8970-82. [PMID: 25085857 DOI: 10.1016/j.biomaterials.2014.07.010] [Citation(s) in RCA: 49] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/04/2014] [Accepted: 07/10/2014] [Indexed: 12/16/2022]
Abstract
Synthetic nerve conduits represent a promising strategy to enhance functional recovery in peripheral nerve injury repair. However, the efficiency of synthetic nerve conduits is often compromised by the lack of molecular factors to create an enriched microenvironment for nerve regeneration. Here, we investigate the in vivo response of mono (MC) and bi-component (BC) fibrous conduits obtained by processing via electrospinning poly(ε-caprolactone) (PCL) and gelatin solutions. In vitro studies demonstrate that the inclusion of gelatin leads to uniform electrospun fiber size and positively influences the response of Dorsal Root Ganglia (DRGs) neurons as confirmed by the preferential extensions of neurites from DRG bodies. This behavior can be attributed to gelatin as a bioactive cue for the cultured DRG and to the reduced fibers size. However, in vivo studies in rat sciatic nerve defect model show an opposite response: MC conduits stimulate superior nerve regeneration than gelatin containing PCL conduits as confirmed by electrophysiology, muscle weight and histology. The G-ratio, 0.71 ± 0.07 for MC and 0.66 ± 0.05 for autograft, is close to 0.6, the value measured in healthy nerves. In contrast, BC implants elicited a strong host response and infiltrating tissue occluded the conduits preventing the formation of myelinated axons. Therefore, although gelatin promotes in vitro nerve regeneration, we conclude that bi-component electrospun conduits are not satisfactory in vivo due to intrinsic limits to their mechanical performance and degradation kinetics, which are essential to peripheral nerve regeneration in vivo.
Collapse
Affiliation(s)
- Valentina Cirillo
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy (IPCB-CNR), Viale Kennedy 54, Naples 80125, Italy; Department of Chemical, Materials and Industrial Production Engineering (DICMAPI), University of Naples Federico II, P.leTecchio 80, Naples 80125, Italy
| | - Basak A Clements
- New Jersey Center for Biomaterials, Rutgers - The State University of NJ, 145 Bevier Road, Piscataway, NJ 08854, USA
| | - Vincenzo Guarino
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy (IPCB-CNR), Viale Kennedy 54, Naples 80125, Italy.
| | - Jared Bushman
- New Jersey Center for Biomaterials, Rutgers - The State University of NJ, 145 Bevier Road, Piscataway, NJ 08854, USA
| | - Joachim Kohn
- New Jersey Center for Biomaterials, Rutgers - The State University of NJ, 145 Bevier Road, Piscataway, NJ 08854, USA
| | - Luigi Ambrosio
- Institute of Polymers, Composites and Biomaterials, National Research Council of Italy (IPCB-CNR), Viale Kennedy 54, Naples 80125, Italy
| |
Collapse
|
28
|
Xie L, Zhang N, Marsano A, Vunjak-Novakovic G, Zhang Y, Lopez MJ. In vitro mesenchymal trilineage differentiation and extracellular matrix production by adipose and bone marrow derived adult equine multipotent stromal cells on a collagen scaffold. Stem Cell Rev Rep 2014; 9:858-72. [PMID: 23892935 PMCID: PMC3834181 DOI: 10.1007/s12015-013-9456-1] [Citation(s) in RCA: 41] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/16/2022]
Abstract
Directed differentiation of adult multipotent stromal cells (MSC) is critical for effective treatment strategies. This study was designed to evaluate the capability of equine MSC from bone marrow (BMSC) and adipose tissue (ASC) on a type I collagen (COLI) scaffold to undergo chondrogenic, osteogenic and adipogenic differentiation and form extracellular matrix (ECM) in vitro. Following determination of surface antigen expression, MSC were loaded into scaffolds in a perfusion bioreactor and loading efficiency was quantified. Cell-scaffold constructs were assessed after loading and 7, 14 and 21 days of culture in stromal or induction medium. Cell number was determined with DNA content, cell viability and spatial uniformity with confocal laser microscopy and cell phenotype and matrix production with light and scanning electron microscopy and mRNA levels. The MSC were positive for CD29 (>90 %), CD44 (>99 %), and CD105 (>60 %). Loading efficiencies were >70 %. The ASC and BMSC cell numbers on scaffolds were affected by culture in induction medium differently. Viable cells remained uniformly distributed in scaffolds for up to 21 days and could be directed to differentiate or to maintain an MSC phenotype. Micro- and ultrastructure showed lineage-specific cell and ECM changes. Lineage-specific mRNA levels differed between ASC and BMSC with induction and changed with time. Based on these results, equine ASC and BMSC differentiate into chondrogenic, osteogenic and adipogenic lineages and form ECM similarly on COLI scaffolds. The collected data supports the potential for equine MSC-COLI constructs to support diverse equine tissue formation for controlled biological studies.
Collapse
Affiliation(s)
- Lin Xie
- Laboratory for Equine and Comparative Orthopedic Research, Equine Health Studies Program, Department of Veterinary Clinical Sciences, Louisiana State University, Baton Rouge, LA, 70803, USA
| | | | | | | | | | | |
Collapse
|
29
|
Primordium of an artificial Bruch's membrane made of nanofibers for engineering of retinal pigment epithelium cell monolayers. Acta Biomater 2013; 9:9414-22. [PMID: 23917149 DOI: 10.1016/j.actbio.2013.07.029] [Citation(s) in RCA: 83] [Impact Index Per Article: 7.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/25/2013] [Revised: 07/22/2013] [Accepted: 07/24/2013] [Indexed: 01/24/2023]
Abstract
Transplanted retinal pigment epithelium (RPE) cells hold promise for treatment of age-related macular degeneration (AMD) and Stargardt disease (SD), but it is conceivable that the degenerated host Bruch's membrane (BM) as a natural substrate for RPE might not optimally support transplanted cell survival with correct cellular organization. We fabricated novel ultrathin three-dimensional (3-D) nanofibrous membranes from collagen type I and poly(lactic-co-glycolic acid) (PLGA) by an advanced clinical-grade needle-free electrospinning process. The nanofibrillar 3-D networks closely mimicked the fibrillar architecture of the native inner collagenous layer of human BM. Human RPE cells grown on our nanofibrous membranes bore a striking resemblance to native human RPE. They exhibited a correctly orientated monolayer with a polygonal cell shape and abundant sheet-like microvilli on their apical surfaces. RPE cells built tight junctions and expressed RPE65 protein. Flat 2-D PLGA film and cover glass as controls delivered inferior RPE layers. Our nanofibrous membranes may imitate the natural BM to such extent that they allow for the engineering of an in vivo-like human RPE monolayer that maintains the natural biofunctional characteristics. Such ultrathin membranes may provide a promising vehicle for a functional RPE cell monolayer implantation in the subretinal space in patients with AMD or SD.
Collapse
|
30
|
Guarino V, Raucci MG, Ambrosio L. Micro/Nanotexturing and Bioactivation Strategies to Design Composite Scaffolds and ECM-Like Analogues. ACTA ACUST UNITED AC 2013. [DOI: 10.1002/masy.201300074] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Vincenzo Guarino
- Institute of Composite and Biomedical Materials and DSCTM-CNR; P. le Tecchio 80 80125 Naples Italy
| | - Maria Grazia Raucci
- Institute of Composite and Biomedical Materials and DSCTM-CNR; P. le Tecchio 80 80125 Naples Italy
| | - Luigi Ambrosio
- Institute of Composite and Biomedical Materials and DSCTM-CNR; P. le Tecchio 80 80125 Naples Italy
| |
Collapse
|
31
|
Tissue engineering and ureter regeneration: is it possible? Int J Artif Organs 2013; 36:392-405. [PMID: 23645581 DOI: 10.5301/ijao.5000130] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 07/11/2012] [Indexed: 12/11/2022]
Abstract
Large ureter damages are difficult to reconstruct. Current techniques are complicated, difficult to perform, and often associated with failures. The ureter has never been regenerated thus far. Therefore the use of tissue engineering techniques for ureter reconstruction and regeneration seems to be a promising way to resolve these problems. For proper ureter regeneration the following problems must be considered: the physiological aspects of the tissue, the type and shape of the scaffold, the type of cells, and the specific environment (urine).
This review presents tissue engineering achievements in the field of ureter regeneration focusing on the scaffold, the cells, and ureter healing.
Collapse
|
32
|
Alvarez-Perez MA, Guarino V, Cirillo V, Ambrosio L. Basic protocols to investigate hMSC behavior onto electrospun fibers. Methods Mol Biol 2013; 1058:109-117. [PMID: 23700278 DOI: 10.1007/7651_2013_12] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.1] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 06/02/2023]
Abstract
Human mesenchymal stem cells (hMSC) currently represent a major cell resource in the research laboratory, to study differentiated-cell behavior in 3D scaffolds during the regeneration processes. Adhesion and differentiation of stem cells to a specific phenotype are achieved by culturing them in apposite culture media under precise conditions. Meanwhile, hydrolytic degradation of polymeric scaffolds allows implanted cells to synthesize their own extracellular matrix in situ after implantation so that the degeneration of the foreign scaffold is temporally matched by creation of the new innate one. In this context, structural properties and biochemical signals may concur to influence the cell response to the environmental stimuli during the culture. So, it becomes mandatory to introduce robust protocols to treat hMSC alone-before the culture-and in combination with the scaffolds for the next investigation by scanning electron microscopy. Here, we describe the protocols used to manage hMSC before and during the culture in order to obtain more detailed information on cell mechanisms mediated by polymeric scaffolds.
Collapse
Affiliation(s)
- Marco A Alvarez-Perez
- Institute of Composite and Biomedical Materials, National Research Council of Italy, Naples, Italy
| | | | | | | |
Collapse
|
33
|
Dorsal and Ventral Stimuli in Cell–Material Interactions: Effect on Cell Morphology. Biointerphases 2012; 7:39. [DOI: 10.1007/s13758-012-0039-5] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/22/2012] [Accepted: 05/15/2012] [Indexed: 10/28/2022] Open
|
34
|
Design of Bioactive Electrospun Scaffolds for Bone Tissue Engineering. J Appl Biomater Funct Mater 2012; 10:223-8. [DOI: 10.5301/jabfm.2012.10343] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 09/27/2012] [Indexed: 11/20/2022] Open
Abstract
Background This study aimed to produce polycaprolactone (PCL) and PCL/gelatin fibrous scaffolds by electrospinning to engineer functional bone by the careful reproduction of the native microenviroment of the natural tissue. Methods Polymer solutions were processed by electrospinning technique to fabricate 2D and 3D platforms in the form of random flat membranes and bilayered conduits, through the use of collectors – i.e., grounded metal plates and a rotating mandrel, via a 2-step electrospinning process, to produce a bilayered structure. Results The results showed that solvent properties and the integration of gelatin could strongly influence the scaffold features in terms of fiber size scale and homogeneity, thus potentially affecting the final biological response. Moreover, 3D bilayered devices ensured the mechanical stability required to guide the forming bone during the regeneration process. Conclusions Overall, bioactive 2D or 3D electrospun platforms with microstructured and nanostructured properties can be used successfully as extracellular matrix analogues in bone regeneration.
Collapse
|
35
|
In vitromineralization and bone osteogenesis in poly(ε-caprolactone)/gelatin nanofibers. J Biomed Mater Res A 2012; 100:3008-19. [DOI: 10.1002/jbm.a.34233] [Citation(s) in RCA: 48] [Impact Index Per Article: 4.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/13/2012] [Revised: 03/09/2012] [Accepted: 04/23/2012] [Indexed: 11/07/2022]
|