Enhancement of extracellular electron transfer and bioelectricity output by synthetic porin

Bridging the biochemistry lecture and laboratory courses: Construction and application of the "Innovative Experimental Design" module

Both lecture and laboratory courses of biochemistry are important professional courses for undergraduates with biology related majors. Course optimization and update is crucial but challenging, especially for the laboratory course. Although taught separately, here we showed a strategy to bridge the two courses and promote the improvement of both. In addition to knowledge teaching, we implanted the "Innovative Experimental Design" module in the lecture course in which students were required to design and present their own experimental ideas. After evaluation by the faculty group, the best idea was supported for further experimental test. Here we described the preliminary experiments and optimization procedures about the idea of microbial fuel cells. This experiment is ready to be included into the laboratory course program in spring 2023.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Membrane engineering of Escherichia coli based on "Building bridges" and "Digging tunnels" to improve electro-fermentation of succinate

Succinate is the end product of anaerobic metabolism of Escherichia coli, and its over-production needs abundant reducing force. Electro-fermentation (EF) is a novel biotechnology to steer and control fermentative processes by supplying extra electrons. However, E.coli is a non-electroactive strain which needs the support of electron shuttle in EF. Here, membrane engineering strategies of "Building bridges" via screening direct electron transport pathway and "Digging tunnels" via screening membrane porins were developed to improve the transmembrane transport of electron during the cathodic electro-fermentation (CEF). As a result, the total electron quantity during electro-fermentation was increased from 1.21 mmol to 7.90 mmol, and succinate yield was increased by 23.3% when these strategies simultaneously were applied to the succinate candidate E. coli Suc260. Hence, this study provides a reference mode for designing and constructing non-electroactive bacteria for electro-fermentation of reductive metabolites.

Advances in mechanisms and engineering of electroactive biofilms

Electroactive biofilms (EABs) are electroactive microorganisms (EAMs) encased in conductive polymers that are secreted by EAMs and formed by the accumulation and cross-linking of extracellular polysaccharides, proteins, nucleic acids, lipids, and other components. EABs are present in the form of multicellular aggregates and play a crucial role in bioelectrochemical systems (BESs) for diverse applications, including biosensors, microbial fuel cells for renewable bioelectricity production and remediation of wastewaters, and microbial electrosynthesis of valuable chemicals. However, naturally occurred EABs are severely limited owing to their low electrical conductivity that seriously restrict the electron transfer efficiency and practical applications. In the recent decade, synthetic biology strategies have been adopted to elucidate the regulatory mechanisms of EABs, and to enhance the formation and electrical conductivity of EABs. Based on the formation of EABs and extracellular electron transfer (EET) mechanisms, the synthetic biology-based engineering strategies of EABs are summarized and reviewed as follows: (i) Engineering the structural components of EABs, including strengthening the synthesis and secretion of structural elements such as polysaccharides, eDNA, and structural proteins, to improve the formation of biofilms; (ii) Enhancing the electron transfer efficiency of EAMs, including optimizing the distribution of c-type cytochromes and conducting nanowire assembly to promote contact-based EET, and enhancing electron shuttles' biosynthesis and secretion to promote shuttle-mediated EET; (iii) Incorporating intracellular signaling molecules in EAMs, including quorum sensing systems, secondary messenger systems, and global regulatory systems, to increase the electron transfer flux in EABs. This review lays a foundation for the design and construction of EABs for diverse BES applications.

Biomass-Derived Carbon Anode for High-Performance Microbial Fuel Cells

: Although microbial fuel cells (MFCs) have been developed over the past decade, they still have a low power production bottleneck for practical engineering due to the ineffective interfacial bioelectrochemical reaction between exoelectrogens and anode surfaces using traditional carbonaceous materials. Constructing anodes from biomass is an effective strategy to tackle the current challenges and improve the efficiency of MFCs. The advantage features of these materials come from the well-decorated aspect with an enriched functional group, the turbostratic nature, and porous structure, which is important to promote the electrocatalytic behavior of anodes in MFCs. In this review article, the three designs of biomass-derived carbon anodes based on their final products (i.e., biomass-derived nanocomposite carbons for anode surface modification, biomass-derived free-standing three-dimensional carbon anodes, and biomass-derived carbons for hybrid structured anodes) are highlighted. Next, the most frequently obtained carbon anode morphologies, characterizations, and the carbonization processes of biomass-derived MFC anodes were systematically reviewed. To conclude, the drawbacks and prospects for biomass-derived carbon anodes are suggested.

Engineered cytochrome fused extracellular matrix enabled efficient extracellular electron transfer and improved performance of microbial fuel cell

Microbial fuel cell (MFC) was a promising technology for energy harvesting from wastewater. However, inefficient bacterial extracellular electron transfer (EET) limited the performance as well as the applications of MFC. Here, a new strategy to reinforce the EET by engineering synthetic extracellular matrix (ECM) with cytochrome fused curli was developed. By genetically fusing a minimal cytochrome domain (MCD) with the curli protein CsgA and heterogeneously expressing in model exoelectrogen of Shewanella oneidensis MR-1, the cytochrome fused electroactive curli network was successfully constructed and assembled. Interestingly, the strain with the MCD fused synthetic ECM delivered about 2.4 times and 2.0 times higher voltage and power density output than these of wild type MR-1 in MFC. More impressively, electrochemical analysis suggested that this synthetic ECM not only introduced cytochrome of MCD, but also attracted more self-secreted electrochemically active substances, which might facilitate the EET and improve the MFC performance. This work demonstrated the possibility to manipulation the EET with ECM engineering, which opened up new path for exoelectrogen design and engineering.

Sustained Biotic-Abiotic Hybrids Methanogenesis Enabled Using Metal-Free Black Phosphorus/Carbon Nitride

Biotic-abiotic hybrid systems (BAHs) constructed by integrating biological methanogens with photocatalysts offer novel approaches for the effective solar-driven conversion of CO2 to CH4, providing significant inspiration for achieving carbon neutrality and alleviating the energy crisis. As metal photocatalysts would cause photocorrosion that damages microbial cells and lead to system imbalance. Therefore, exploring suitable metal-free photocatalysts is of particular importance in the search for more efficient and sustainable BAHs to improve the actual operability and applicability. Herein, black phosphorus/carbon nitride (BPCNx) as an alternative metal-free heterostructure was combined with Methanosarcina barkeri (M. barkeri) to construct M. barkeri-BPCNx hybrid systems, and their cyclic methanogenesis performance was investigated. Our results demonstrated that BPCNx promotes the separation of photogenerated charges and enhances the quantum yield, providing a sustained energy source for the cyclically driven M. barkeri reduction of CO2 to CH4 under visible light. Our system achieved a total CH4 yield of 1087.45 ± 29.14 μmol gcat–1 after three cycles, 1.96 times higher than that of M. barkeri-Ni@CdS. M. barkeri-BPCNx overcame the defects of the metal photocatalyst and kept cell permeability, achieving cyclic stability and effectively maintaining the activity of M. barkeri. These results highlight the viable role of BPCNx as a metal-free photocatalysts in the construction of BAHs for the sustained and efficient methanation of CO2, which is conducive to the development of an environmentally-friendly, low-cost, and efficient strategy for the conversion of CO2 to CH4.

Improved membrane permeability with cetyltrimethylammonium bromide (CTAB) addition for enhanced bidirectional transport of substrate and electron shuttles

The effects of membrane permeability on extracellular electron transfer (EET) and performance of microbial fuel cell (MFC) need to be explored. In this work, cetyltrimethylammonium bromide (CTAB) was chosen to enhance the current generation and bidirectional transport of substrate and electron shuttles by tailoring the cell membrane permeability. Specifically, the peak currents of biofilms treated with CTAB especially at 200 μM were obviously higher than the control biofilm with no CTAB, and the riboflavin mediated electron transfer was promoted prominently. Biomass and viability analyses showed that an appropriate concentration of CTAB had almost no adverse effect on the cell viability of biofilm and could increase the biomass of biofilm. Measurements of the extracellular activity of alkaline phosphatase and UV-vis absorption confirmed the increased membrane permeability and the promoted efficiency of substrates transported into cells. This contribution paves the key step for facilitating EET process by adjusting membrane permeability through CTAB or other surfactants addition.

Electronic control of redox reactions inside Escherichia coli using a genetic module

Microorganisms regulate the redox state of different biomolecules to precisely control biological processes. These processes can be modulated by electrochemically coupling intracellular biomolecules to an external electrode, but current approaches afford only limited control and specificity. Here we describe specific electrochemical control of the reduction of intracellular biomolecules in Escherichia coli through introduction of a heterologous electron transfer pathway. E. coli expressing cymAmtrCAB from Shewanella oneidensis MR-1 consumed electrons directly from a cathode when fumarate or nitrate, both intracellular electron acceptors, were present. The fumarate-triggered current consumption occurred only when fumarate reductase was present, indicating all the electrons passed through this enzyme. Moreover, CymAMtrCAB-expressing E. coli used current to stoichiometrically reduce nitrate. Thus, our work introduces a modular genetic tool to reduce a specific intracellular redox molecule with an electrode, opening the possibility of electronically controlling biological processes such as biosynthesis and growth in any microorganism.

Synergistic effect of carbon starvation and exogenous redox mediators on corrosion of X70 pipeline steel induced by Desulfovibrio singaporenus

In microbiologically influenced corrosion (MIC) induced by sulfate-reducing bacteria (SRB), the electrons released from iron were transferred via extracellular electron transfer (EET) to the inner cells. Electron mediators and carbon starvation have also been found to promote steel corrosion. This study aimed to investigate the synergistic effects of electron mediators and carbon starvation on MIC and their effect on biofilm catalytic activity. The results demonstrated that the weight losses of X70 steel were 0.68 and 1.03 mg/cm² in 100% and 10% carbon source (CS) SRB solution, respectively. The addition of riboflavin and cytochrome c increased the corrosion rate by 1.76 and 1.87 times, respectively, in the 100% CS SRB medium compared to the medium without exogenous redox mediators. For the 10% CS SRB medium, the corrosion rate increased by 1.40 and 1.89 times, respectively, when riboflavin and cytochrome c were added. The addition of riboflavin and cytochrome c also enhanced the biocatalytic activity of the SRB biofilm in both the 100% and 10% CS SRB media.

Recent advances in the improvement of bi-directional electron transfer between abiotic/biotic interfaces in electron-assisted biosynthesis system

As an important biosynthesis technology, electron-assisted biosynthesis (EABS) system can utilize exogenous electrons to regulate the metabolic network of microorganisms, realizing the biosynthesis of high value-added chemicals and CO₂ fixation. Electrons play crucial roles as the energy carriers in the EABS process. In fact, efficient interfacial electron transfer (ET) is the decisive factor to realize the rapid energy exchange, thus stimulating the biosynthesis of target metabolic products. However, due to the interfacial resistance of ET between the abiotic solid electrode and biotic microbial cells, the low efficiency of interfacial ET has become a major bottleneck, further limiting the practical application of EABS system. As the cell membrane is insulated, even the cell membrane embedded electron conduit (no matter cytochromes or channel protein for shuttle transferring) to increase the cell membrane conductivity, the ET between membrane electron conduit and electrode surface is kinetically restricted. In this review, the pathway of bi-directional interfacial ET in EABS system was summarized. Furthermore, we reviewed representative milestones and advances in both the anode outward interfacial ET (from organism to electrode) and cathode inward interfacial ET (from electrode to organism). Here, new insights from the perspectives of material science and synthetic biology were also proposed, which were expected to provide some innovative opinions and ideas for the following in-depth studies.

Quorum sensing shaped microbial consortia and enhanced hydrogen recovery from waste activated sludge electro-fermentation on basis of free nitrous acid treatment

In this study, the feasibility of free nitrous acid (FNA) pretreatment coupled with quorum sensing (QS) was investigated to enhance hydrogen recovery from waste activated sludge (WAS) via electro-fermentation (EF). 3-oxo-hexanoyl-homoserine lactone (3OC6-HSL), as the signal molecule, was only added in the first three cycles of sludge inoculation at the phase of microbial electrolysis cells (MECs) startup. Results showed that QS combined FNA (AHL-FMEC) enabled highest hydrogen yield and current (4.3 mg/g VSS and 4.5 mA), while that generated from sole FNA/QS treated WAS (FMEC/AHL-RMEC) were only 3.5/3.0 mg/g VSS and 1.5/1.5 mA, respectively. Fourier transform infrared (FT-IR) spectra illustrated the effective conversion of organics in AHL-FMEC, the utilization efficiencies of proteins and carbohydrates achieved to 75.0% and 79.7%, respectively. Besides, the internal resistance decreased from 34.5 Ω (FMEC) to 22.9 Ω (AHL-RMEC), further to 18.0 Ω, indicating the promoted bioelectrochemical activity of electroactive bacteria (EAB) in AHL-FMEC. Correspondingly, both EAB (21.7%), e.g., Geobacter (9.3%) and Pseudomonas (3.2%) and anaerobic fermentation bacteria (AFB, 28.6%), e.g., Proteiniclasticum (14.2%) and Petrimonas (3.6%) enriched to peaks in AHL-FMEC. Moreover, molecular ecological network (MEN) analysis revealed the underling relationships among AFB, EAB and homo-acetogen in EF system, suggesting the possible cooperative QS has been constructed. The results obtained in this study may provide a new insight for efficient hydrogen recovery from electro-fermentation of WAS.

A staged representation electrochemical stimulated strategy to regulate intracellular reducing power for improving succinate production by Escherichia coli AFP111

BACKGROUND

Escherichia coli AFP111 was previously engineered for succinate production by eliminating byproducts of synthesis pathways. Still, the succinate yield is limited due to the insufficient NADH supplement, when fed with glucose. Microbial electrolysis cell (MEC) allows microorganisms to perform unbalanced fermentation by establishing polarized cathode interaction.

METHODS AND RESULTS

In this study, a cathode electrode was used as an additional electron donor to improve succinate synthesis by E. coli AFP111. In MEC with -0.65 V (vs. Ag/AgCl) poised on cathode electrode, 95.72% electrons were transferred into cells via neutral red (NR), and the ratio of NADH/NAD⁺ increased by 2.5-fold. Meanwhile, compared with the control experiment, the value of oxidation-reduction potential (ORP) changed from -240 to -265 mV in MEC, which was beneficial for NADH generation. During two-stage fermentation (no potential growth stage followed by electric stimulation) in MEC, succinate yield was increased by 29.09% (the final yield was 0.71 g g^-1 ), and glucose consumption rate was enhanced by 36.22%. In addition, the carbon flux was pumped to succinate and pyruvate metabolism was enhanced.

CONCLUSION AND IMPLICATIONS

Staged representation of electrochemical stimulated strategy is effective for succinate producing in engineered E. coli by regulating intracellular reducing power, which provides a new concept for producing reduced metabolite in unbalanced fermentation.

TiO2 photoexcitation promoted horizontal transfer of resistance genes mediated by phage transduction

Environmental pollution caused by antibiotic resistance genes (ARGs) has attracted wide concerns, and various approaches have been proposed to control ARGs dissemination. TiO₂ photoexcitation under UV irradiation has been used for such a purpose. But the actual UV intensity is insufficient to trigger the production of reactive oxygen species (ROS) in the aqueous environment. Thus, it is interesting to know how mild photoexcitation of TiO₂ with low-intensity UV affects the horizontal transfer of ARGs. In this work, the impact of TiO₂ photoexcitation on the transductant efficiency of constructed filamentous phage gM13 to its host Escherichia coli TG1 was investigated. Although individual treatment with nano-TiO₂ and UV irradiation both improved the phage infection, TiO₂ photoexcitation exhibited a clear synergistic promotion effect. However, excessive UV irradiation resulted in a decrease in transductant formation, implying severe oxidative damage to the phage and bacterial cells. Extracellular ROS produced by moderate photoexcitation of TiO₂ could increase the outer membrane permeability, which facilitated phage infection. The increase in pili synthesis induced by intracellular ROS provided more sites for phage recognition and invasion in the presence of TiO₂ photoexcitation, which contributed to the transduction process. Our work provides a novel insight into the impact of TiO₂ photoexcitation on ARGs diffusion and is helpful for better understanding non-toxic environmental effect of nanomaterials.

Recent advances on biomass-fueled microbial fuel cell

Biomass is one of the most abundant renewable energy resources on the earth, which is also considered as one of the most promising alternatives to traditional fuel energy. In recent years, microbial fuel cell (MFC) which can directly convert the chemical energy from organic compounds into electric energy has been developed. By using MFC, biomass energy could be directly harvested with the form of electricity, the most convenient, wide-spread, and clean energy. Therefore, MFC was considered as another promising way to harness the sustainable energies in biomass and added new dimension to the biomass energy industry. In this review, the pretreatment methods for biomass towards electricity harvesting with MFC, and the microorganisms utilized in biomass-fueled MFC were summarized. Further, strategies for improving the performance of biomass-fueled MFC as well as future perspectives were highlighted.

Microbial fuel cell-assisted utilization of glycerol for succinate production by mutant of Actinobacillus succinogenes

BACKGROUND

The global production of glycerol is increasing year by year since the demands of biodiesel is rising. It is benefit for high-yield succinate synthesis due to its high reducing property. A. succinogenes, a succinate-producing candidate, cannot grow on glycerol anaerobically, as it needs a terminal electron acceptor to maintain the balance of intracellular NADH and NAD⁺. Microbial fuel cell (MFC) has been widely used to release extra intracellular electrons. However, A. succinogenes is a non-electroactive strain which need the support of electron shuttle in MFC, and pervious research showed that acid-tolerant A. succinogenes has higher content of unsaturated fatty acids, which may be beneficial for the transmembrane transport of lipophilic electron shuttle.

RESULTS

MFC-assisted succinate production was evaluated using neutral red as an electron shuttle to recover the glycerol utilization. First, an acid-tolerant mutant JF1315 was selected by atmospheric and room temperature plasma (ARTP) mutagenesis aiming to improve transmembrane transport of neutral red (NR). Additionally, MFC was established to increase the ratio of oxidized NR to reduced NR. By combining these two strategies, ability of JF1315 for glycerol utilization was significantly enhanced, and 23.92 g/L succinate was accumulated with a yield of 0.88 g/g from around 30 g/L initial glycerol, along with an output voltage above 300 mV.

CONCLUSIONS

A novel MFC-assisted system was established to improve glycerol utilization by A. succinogenes for succinate and electricity production, making this system as a platform for chemicals production and electrical supply simultaneously.

Microbial extracellular electron transfer and strategies for engineering electroactive microorganisms

Electroactive microorganisms (EAMs) are ubiquitous in nature and have attracted considerable attention as they can be used for energy recovery and environmental remediation via their extracellular electron transfer (EET) capabilities. Although the EET mechanisms of Shewanella and Geobacter have been rigorously investigated and are well characterized, much less is known about the EET mechanisms of other microorganisms. For EAMs, efficient EET is crucial for the sustainable economic development of bioelectrochemical systems (BESs). Currently, the low efficiency of EET remains a key factor in limiting the development of BESs. In this review, we focus on the EET mechanisms of different microorganisms, (i.e., bacteria, fungi, and archaea). In addition, we describe in detail three engineering strategies for improving the EET ability of EAMs: (1) enhancing transmembrane electron transport via cytochrome protein channels; (2) accelerating electron transport via electron shuttle synthesis and transmission; and (3) promoting the microbe-electrode interface reaction via regulating biofilm formation. At the end of this review, we look to the future, with an emphasis on the cross-disciplinary integration of systems biology and synthetic biology to build high-performance EAM systems.

A copper-specific microbial fuel cell biosensor based on riboflavin biosynthesis of engineered Escherichia coli

Copper pollution poses a serious threat to the aquatic environment; however, in situ analytical methods for copper monitoring are still scarce. In the current study, Escherichia coli Rosetta was genetically modified to express OprF and ribB with promoter P_t7 and P_cusC , respectively, which could synthesize porin and senses Cu²⁺ to produce riboflavin. The cell membrane permeability of this engineered strain was increased and its riboflavin production (1.45-3.56 μM) was positively correlated to Cu²⁺ (0-0.5 mM). The biosynthetic strain was then employed in microbial fuel cell (MFC) based biosensor. Under optimal operating parameters of pH 7.1 and 37°C, the maximum voltage (248, 295, 333, 352, and 407 mV) of the constructed MFC biosensor showed a linear correlation with Cu²⁺ concentration (0.1, 0.2, 0.3, 0.4, 0.5 mM, respectively; R²  = 0.977). The continuous mode testing demonstrated that the MFC biosensor specifically senses Cu²⁺ with calculated detection limit of 28 μM, which conforms to the common Cu²⁺ safety standard (32 μM). The results obtained with the developed biosensor system were consistent with the existing analytical methods such as colorimetry, flame atomic absorption spectrometry, and inductively coupled plasma optical emission spectrometry. In conclusion, this MFC-based biosensor overcomes the signal conversion and transmission problems of conventional approaches, providing a fast and economic analytical alternative for in situ monitoring of Cu²⁺ in water.

Microbial electro-fermentation for synthesis of chemicals and biofuels driven by bi-directional extracellular electron transfer

Electroactive bacteria could perform bi-directional extracellular electron transfer (EET) to exchange electrons and energy with extracellular environments, thus playing a central role in microbial electro-fermentation (EF) process. Unbalanced fermentation and microbial electrosynthesis are the main pathways to produce value-added chemicals and biofuels. However, the low efficiency of the bi-directional EET is a dominating bottleneck in these processes. In this review, we firstly demonstrate the main bi-directional EET mechanisms during EF, including the direct EET and the shuttle-mediated EET. Then, we review representative milestones and progresses in unbalanced fermentation via anode outward EET and microbial electrosynthesis via inward EET based on these two EET mechanisms in detail. Furthermore, we summarize the main synthetic biology strategies in improving the bi-directional EET and target products synthesis, thus to enhance the efficiencies in unbalanced fermentation and microbial electrosynthesis. Lastly, a perspective on the applications of microbial electro-fermentation is provided.

Genetic engineering for enhanced productivity in bioelectrochemical systems

A shift from petrochemical processes toward a bio-based economy is one of the most advocated developments for a sustainable future. To achieve this will require the biotechnological production of platform chemicals that can be further processed by chemical engineering. Bioelectrochemical systems (BESs) are a novel tool within the biotechnology field. In BESs, microbes serve as biocatalysts for the production of biofuels and value-added compounds, as well as for the production of electricity. Although the general feasibility of bioelectrochemical processes has been demonstrated in recent years, much research has been conducted to develop biocatalysts better suited to meet industrial demands. Initially, mainly natural exoelectrogenic organisms were investigated for their performance in BESs. Driven by possibilities of recent developments in genetic engineering and synthetic biology, the spectrum of microbial catalysts and their versatility (substrate and product range) have expanded significantly. Despite these developments, there is still a tremendous gap between currently achievable space-time yields and current densities on the one hand and the theoretical limits of BESs on the other. It will be necessary to move the performance of the biocatalysts closer to the theoretical possibilities in order to establish viable production routines. This review summarizes the status quo of engineering microbial biocatalysts for anode-applications with high space-time yields. Furthermore, we will address some of the theoretical limitations of these processes exemplarily and discuss which of the present strategies might be combined to achieve highly synergistic effects and, thus, meet industrial demands.

Response-Surface-Optimized and Scaled-Up Microbial Electrosynthesis of Chiral Alcohols

A variety of enzymes can be easily incorporated and overexpressed within Escherichia coli cells by plasmids, making it an ideal chassis for bioelectrosynthesis. It has recently been demonstrated that microbial electrosynthesis (MES) of chiral alcohols is possible by using genetically modified E. coli with plasmid-incorporated and overexpressed enzymes and methyl viologen as mediator for electron transfer. This model system, using NADPH-dependent alcohol dehydrogenase from Lactobacillus brevis to convert acetophenone into (R)-1-phenylethanol, is assessed by using a design of experiment (DoE) approach. Process optimization is achieved with a 2.4-fold increased yield of 94±7 %, a 3.9-fold increased reaction rate of 324±67 μm h-1 , and a coulombic efficiency of up to 68±7 %, while maintaining an excellent enantioselectivity of >99 %. Subsequent scale-up to 1 L by using electrobioreactors under batch and fed-batch conditions increases the titer of (R)-1-phenylethanol to 12.8±2.0 mm and paves the way to further develop E. coli into a universal chassis for MES in a standard biotechnological process environment.

Biosurfactants and Synthetic Surfactants in Bioelectrochemical Systems: A Mini-Review

Bioelectrochemical systems (BESs) are ruled by a complex combination of biological and abiotic factors. The interplay of these factors determines the overall efficiency of BES in generating electricity and treating waste. The recent progress in bioelectrochemistry of BESs and electrobiotechnology exposed an important group of compounds, which have a significant contribution to operation and efficiency: surface-active agents, also termed surfactants. Implementation of the interfacial science led to determining several effects of synthetic and natural surfactants on BESs operation. In high pH, these amphiphilic compounds prevent the cathode electrodes from biodeterioration. Through solubilization, their presence leads to increased catabolism of hydrophobic compounds. They interfere with the surface of the electrodes leading to improved biofilm formation, while affecting its microarchitecture and composition. Furthermore, they may act as quorum sensing activators and induce the synthesis of electron shuttles produced by electroactive bacteria. On the other hand, the bioelectrochemical activity can be tailored for new, improved biosurfactant production processes. Herein, the most recent knowledge on the effects of these promising compounds in BESs is discussed.

Potential of Zymomonas mobilis as an electricity producer in ethanol production

BACKGROUND

Microbial fuel cell (MFC) convokes microorganism to convert biomass into electricity. However, most well-known electrogenic strains cannot directly use glucose to produce valuable products. Zymomonas mobilis, a promising bacterium for ethanol production, owns special Entner-Doudoroff pathway with less ATP and biomass produced and the low-energy coupling respiration, making Z. mobilis a potential exoelectrogen.

RESULTS

A glucose-consuming MFC is constructed by inoculating Z. mobilis. The electricity with power density 2.0 mW/m² is derived from the difference of oxidation-reduction potential (ORP) between anode and cathode chambers. Besides, two-type electricity generation is observed as glucose-independent process and glucose-dependent process. For the sake of enhancing MFC efficiency, extracellular and intracellular strategies are implemented. Biofilm removal and addition of c-type cytochrome benefit electricity performance and Tween 80 accelerates the electricity generation. Perturbation of cellular redox balance compromises the electricity output, indicating that redox homeostasis is the principal requirement to reach ideal voltage.

CONCLUSION

This study identifies potential feature of electricity activity for Z. mobilis and provides multiple strategies to enhance the electricity output. Therefore, additional electricity generation will benefit the techno-economic viability of the commercial bulk production for biochemicals or biofuels in an efficient and environmentally sustainable manner.

A novel biosensor for zinc detection based on microbial fuel cell system

Microbial fuel cell (MFC) biosensors are self-sustainable device for monitoring of various substrates; however, for heavy metals detection are still scarce. In this study, E. coli BL21 was engineered to express the zntR, ribB, and oprF genes with P_zntA promoter, which could sense zinc (Zn²⁺) for riboflavin and porin production. The engineered strain produced high levels of riboflavin (2.4-3.6 μM) and improved cell membrane permeability, with a positive correlation of Zn²⁺ (0-400 μM). The strain was then employed in MFC biosensor under the following operational parameters: external resistance 1000 Ω, pH 9, and temperature 37 °C for Zn²⁺ sensing. The maximum voltages (160, 183, 260, 292, and 342 mV) of the constructed MFC biosensor have a linear relationship with Zn²⁺ concentrations (0, 100, 200, 300, and 400 μM, respectively) (R² = 0.9777). An Android App was developed for the biosensor system that could sense Zn²⁺ in real-time and in situ. The biosensor was applied to wastewater with different Zn²⁺ concentrations and the results showed that the detection range for Zn²⁺ was 20-100 μM, which covers common Zn²⁺ safety standards. The results obtained with developed MFC biosensor were comparable to conventional methods such as colorimetric, flame atomic absorption spectroscopy (FAAS), and inductively coupled plasma optical emission spectroscopy (ICP-OES). In summary, MFC biosensor with biosynthetic strain is an efficient and affordable system for real-time monitoring and sensing of heavy metals.

Resting Escherichia coli as Chassis for Microbial Electrosynthesis: Production of Chiral Alcohols

Chiral alcohols constitute important building blocks that can be produced enantioselectively by using nicotinamide adenine dinucleotide (phosphate) [NAD(P)H]-dependent oxidoreductases. For NAD(P)H regeneration, electricity delivers the cheapest reduction equivalents. Enzymatic electrosynthesis suffers from cofactor and enzyme instability, whereas microbial electrosynthesis (MES) exploits whole cells. Here, we demonstrate MES by using resting Escherichia coli as biocatalytic chassis for a production platform towards fine chemicals through electric power. This chassis was exemplified for the synthesis of chiral alcohols by using a NADPH-dependent alcohol dehydrogenase from Lactobacillus brevis for synthesis of (R)-1-phenylethanol from acetophenone. The E. coli strain and growth conditions affected the performance. Maximum yields of (39.4±5.7) % at a coulombic efficiency of (50.5±6.0) % with enantiomeric excess >99 % was demonstrated at a rate of (83.5±13.9) μm h^-1 , confirming the potential of MES for synthesis of high-value compounds.

Modular engineering to increase intracellular NAD(H/+) promotes rate of extracellular electron transfer of Shewanella oneidensis

The slow rate of extracellular electron transfer (EET) of electroactive microorganisms remains a primary bottleneck that restricts the practical applications of bioelectrochemical systems. Intracellular NAD(H/⁺) (i.e., the total level of NADH and NAD⁺) is a crucial source of the intracellular electron pool from which intracellular electrons are transferred to extracellular electron acceptors via EET pathways. However, how the total level of intracellular NAD(H/⁺) impacts the EET rate in Shewanella oneidensis has not been established. Here, we use a modular synthetic biology strategy to redirect metabolic flux towards NAD⁺ biosynthesis via three modules: de novo, salvage, and universal biosynthesis modules in S. oneidensis MR-1. The results demonstrate that an increase in intracellular NAD(H/⁺) results in the transfer of more electrons from the increased oxidation of the electron donor to the EET pathways of S. oneidensis, thereby enhancing intracellular electron flux and the EET rate.

A bottleneck for the application of bioelectrochemical systems is the slow rate of extracellular electron transfer. Here the authors use a synthetic biology approach to redirect metabolic flux to NAD⁺ biosynthesis, which enhances the intracellular electron flux and the extracellular electron transfer rate.

Balancing cellular redox metabolism in microbial electrosynthesis and electro fermentation - A chance for metabolic engineering

More and more microbes are discovered that are capable of extracellular electron transfer, a process in which they use external electrodes as electron donors or acceptors for metabolic reactions. This feature can be used to overcome cellular redox limitations and thus optimizing microbial production. The technologies, termed microbial electrosynthesis and electro-fermentation, have the potential to open novel bio-electro production platforms from sustainable energy and carbon sources. However, the performance of reported systems is currently limited by low electron transport rates between microbes and electrodes and our limited ability for targeted engineering of these systems due to remaining knowledge gaps about the underlying fundamental processes. Metabolic engineering offers many opportunities to optimize these processes, for instance by genetic engineering of pathways for electron transfer on the one hand and target product synthesis on the other hand. With this review, we summarize the status quo of knowledge and engineering attempts around chemical production in bio-electrochemical systems from a microbe perspective. Challenges associated with the introduction or enhancement of extracellular electron transfer capabilities into production hosts versus the engineering of target compound synthesis pathways in natural exoelectrogens are discussed. Recent advances of the research community in both directions are examined critically. Further, systems biology approaches, for instance using metabolic modelling, are examined for their potential to provide insight into fundamental processes and to identify targets for metabolic engineering.

Effects of electron acceptors on removal of antibiotic resistant Escherichia coli, resistance genes and class 1 integrons under anaerobic conditions

Anaerobic biotechnologies can effectively remove antibiotic resistant bacteria (ARB) and antibiotic resistance genes (ARGs), but there is a need to better understand the mechanisms. Here we employ bioelectrochemical systems (BES) as a platform to investigate the fate of a native tetracycline and sulfonamide-resistant Escherichia coli strain and its ARGs. The E. coli strain carrying intI1, sulI and tet(E) was isolated from domestic wastewater and dosed into a tubular BES. The BES was first operated as a microbial fuel cell (MFC), with aeration in the cathode, which resulted in enhanced removal of E. coli and ARGs by ~2 log (i.e., order of magnitude) when switched from high current to open circuit operation mode. The BES was then operated as a microbial electrolysis cell (MEC) to exclude the effects of oxygen diffusion, and the removal of E. coli and ARGs during the open circuit configuration was again 1-2 log higher than that at high current mode. Significant correlations of E. coli vs. current (R(2)=0.73) and ARGs vs. E. coli (R(2) ranged from 0.54 to 0.87), and the fact that the BES substrate contained no electron acceptors, implied that the persistence of the E. coli and its ARGs was determined by the availability of indigenous electron acceptors in the BES, i.e., the anode electrode or the electron shuttles generated by the exoelectrogens. Subsequent experiments with pure-culture tetracycline and sulfonamide-resistant E. coli being incubated in a two-chamber MEC and serum bottles demonstrated that the E. coli could survive by respiring anode electrode and/or electron shuttles released by exoelectrogens, and ARGs persisted with their host E. coli.

Enhanced power production from microbial fuel cells with high cell density culture

Improvement of power production in a microbial fuel cell (MFC) with a high cell density culture strategy was developed. By using high cell density culture, the voltage output and power density output of the MFC were enhanced about 0.6 and 1.6 times compared to the control, respectively. Further analysis showed that riboflavin concentration in the MFC was dramatically increased from 0.1 mg/L to 1.2 mg/L by high cell density culture. Moreover, the biofilm formation on the anode surface was significantly enhanced by this new strategy. The increased accumulation of electron shuttle (riboflavin) as well as enhanced biofilm formation contributed to the improvement in anodic electrochemical activity and these factors were the underlying mechanism for MFC performance improvement by high cell density culture. This work demonstrated that high cell density culture would be a simple and practical strategy for MFC manipulation.

Membrane permeabilization by conjugated oligoelectrolytes accelerates whole-cell catalysis

Conjugated oligoelectrolytes (COE) increase outer membrane permeability inEscherichia coli,improve transport of small molecules through the cell envelope and thus accelerate whole-cell catalysis.

Nitrogen doped carbon nanoparticles enhanced extracellular electron transfer for high-performance microbial fuel cells anode

Nitrogen doped carbon nanoparticles (NDCN) were applied to modify the carbon cloth anodes of microbial fuel cells (MFCs) inoculated with Shewanella oneidensis MR-1, one of the most well-studied exoelectrogens. Experimental results demonstrated that the use of NDCN increased anodic absorption of flavins (i.e., the soluble electron mediator secreted by S. oneidensis MR-1), facilitating shuttle-mediated extracellular electron transfer. In addition, we also found that NDCN enabled enhanced contact-based direct electron transfer via outer-membrane c-type cytochromes. Taken together, the performance of MFCs with the NDCN-modified anode was enormously enhanced, delivering a maximum power density 3.5 times' higher than that of the MFCs without the modification of carbon cloth anodes.

Engineering quorum sensing signaling of Pseudomonas for enhanced wastewater treatment and electricity harvest: A review

Cell-cell communication that enables synchronized population behaviors in microbial communities dictates various biological processes. It is of great interest to unveil the underlying mechanisms of fine-tuning cell-cell communication to achieve environmental and energy applications. Pseudomonas is a ubiquitous microbe in environments that had wide applications in bioremediation and bioenergy generation. The quorum sensing (QS, a generic cell-cell communication mechanism) systems of Pseudomonas underlie the aromatics biodegradation, denitrification and electricity harvest. Here, we reviewed the recent progresses of the genetic strategies in engineering QS circuits to improve efficiency of wastewater treatment and the performance of microbial fuel cells.

Endogenously enhanced biosurfactant production promotes electricity generation from microbial fuel cells

Microbial fuel cell (MFC) is considered as a promising green energy source and energy-saving pollutants treatment technology as it integrates pollutant biodegradation with energy extraction. In this work, a facile approach to enhance endogenous biosurfactant production was developed to improve the electron transfer rate and power output of MFC. By overexpression of rhlA, the key gene responsible for rhamnolipids synthesis, over-production of self-synthesized rhamnolipids from Pseudomonas aeruginosa PAO1 was achieved. Strikingly, the increased rhamnolipids production by rhlA overexpression significantly promoted the extracellular electron transfer of P. aeruginosa by enhancing electron shuttle (pyocyanin) production and increasing bacteria attachment on the anode. As a result, the strain with endogenously enhanced rhamnolipids production delivered 2.5 times higher power density output than that of the parent strain. This work substantiated that the enhancement on endogenous biosurfactant production could be a promising approach for improvement on the electricity output of MFC.

Facilitated extracellular electron transfer of Shewanella loihica PV-4 by antimony-doped tin oxide nanoparticles as active microelectrodes

Dissimilatory metal reducing bacteria are capable of extracellular electron transfer (EET) to insoluble metal oxides as external electron acceptors for their anaerobic respiration, which is recognized as an important energy-conversion process in natural and engineered environments, such as in mineral cycling, bioremediation, and microbial fuel/electrolysis cells. However, the low EET efficiency remains one of the major bottlenecks for its practical application. We report firstly that the microbial current generated by Shewanella loihica PV-4 (S. loihica PV-4) could be greatly improved that is up to ca. 115 fold, by adding antimony-doped tin oxide (ATO) nanoparticles in the electrochemical reactor. The results demonstrate that the biocompatible, electrically conductive ATO nanoparticles acted as active microelectrodes could facilitate the formation of a cells/ATO composite biofilm and the reduction of the outer membrane c-type cytochromes (OM c-Cyts) that are beneficial for the electron transfer from cells to electrode. Meanwhile, a synergistic effect between the participation of OM c-Cyts and the accelerated EET mediated by cell-secreted flavins may play an important role for the enhanced current generation in the presence of ATO nanoparticles. Moreover, it is worth noting that the TCA cycle in S. loihica PV-4 cells is activated by adding ATO nanoparticles, even if the potential is poised at +0.2 V, thereby also improving the EET process. The results presented here may provide a simple and effective strategy to boost the EET of S. loihica PV-4 cells, which is conducive to providing potential applications in bioelectrochemical systems.

Positive regulation of the Shewanella oneidensis OmpS38, a major porin facilitating anaerobic respiration, by Crp and Fur

Major porins are among the most abundant proteins embedded in the outer membrane (OM) of Gram-negative bacteria, playing crucial roles in maintenance of membrane structural integrity and OM permeability. Although many OM proteins (especially c-type cytochromes) in Shewanella oneidensis, a research model for respiratory versatility, have been extensively studied, physiological significance of major porins remains largely unexplored. In this study, we show that OmpS38 and OmpA are two major porins, neither of which is responsive to changes in osmolarity or contributes to the intrinsic resistance to β-lactam antibiotics. However, OmpS38 but not OmpA is largely involved in respiration of non-oxygen electron acceptors. We then provide evidence that expression of ompS38 is transcribed from two promoters, the major of which is favored under anaerobic conditions while the other appears constitutive. The major promoter is under the direct control of Crp, the master regulator dictating respiration. As a result, the increase in the level of OmpS38 correlates with an elevated activity in Crp under anaerobic conditions. In addition, we show that the activity of the major promoter is also affected by Fur, presumably indirectly, the transcription factor for iron-dependent gene expression.

Metabolite-enabled mutualistic interaction between Shewanella oneidensis and Escherichia coli in a co-culture using an electrode as electron acceptor

Mutualistic interactions in planktonic microbial communities have been extensively studied. However, our understanding on mutualistic communities consisting of co-existing planktonic cells and biofilms is limited. Here, we report a planktonic cells-biofilm mutualistic system established by the fermentative bacterium Escherichia coli and the dissimilatory metal-reducing bacterium Shewanella oneidensis in a bioelectrochemical device, where planktonic cells in the anode media interact with the biofilms on the electrode. Our results show that the transfer of formate is the key mechanism in this mutualistic system. More importantly, we demonstrate that the relative distribution of E. coli and S. oneidensis in the liquid media and biofilm is likely driven by their metabolic functions towards an optimum communal metabolism in the bioelectrochemical device. RNA sequencing-based transcriptomic analyses of the interacting organisms in the mutualistic system potentially reveal differential expression of genes involved in extracellular electron transfer pathways in both species in the planktonic cultures and biofilms.