Asymmetrically substituted benzene-1,3,5-tricarboxamides: self-assembly and odd-even effects in the solid state and in dilute solution

Influence of Polymer Side Chain Size and Backbone Length on the Self-Assembly of Supramolecular Polymer Bottlebrushes

Hydrogen bonds are a versatile tool for creating fibrous, bottlebrush-like assemblies of polymeric building blocks. However, a delicate balance of forces exists between the steric repulsion of the polymer chains and these directed supramolecular forces. In this work we have systematically investigated the influence of structural parameters of the attached polymers on the assembly behaviour of benzene trisurea (BTU) and benzene tris(phenylalanine) (BTP) conjugates in water. Polymers with increasing main chain lengths and different side chain sizes were prepared by reversible addition-fragmentation chain-transfer (RAFT) polymerization of hydroxyethyl acrylate (HEA), tri(ethylene glycol) methyl ether acrylate (TEGA) and oligo(ethylene glycol) methyl ether acrylate (OEGA). The resulting structures were analyzed using small angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). Both BTU and BTP formed fibres with PHEA attached, but a transition to spherical morphologies was observed at degrees of polymerisation (DP) of 70 and above. Overall, the main chain length appeared to be a dominating factor in inducing morphology transitions. Increasing the side chain size generally had a similar effect but mainly impeded any aggregation as is the case of POEGA. Interestingly, BTP conjugates still formed fibres, suggesting that the stronger intermolecular interactions can compensate partially for the steric repulsion.

Ferro- and ferrielectricity and negative piezoelectricity in thioamide-based supramolecular organic discotics

Amide-based discotic supramolecular organic materials are of interest for fundamental understanding of cooperative self-assembly and collective dipole switching mechanisms as well as for practically relevant ferroelectric and piezoelectric properties. Here, we show how replacing amides (dipole moment of ∼3.5 D) with thioamides (∼5.1 D) as dipolar moieties in the archetypal C₃-symmetric discotic molecule BTA leads to ferroelectric materials with a higher remnant polarization and lower coercive field. The thioamide-based materials also demonstrate a rare negative piezoelectricity and a previously predicted, yet never experimentally observed, polarization reversal via asymmetric intermediate states, that is, ferrielectric switching.

Interplay Between Hydrogen Bonding and Electron Transfer in Mixed Valence Assemblies of Triarylamine Trisamides

Hydrogen-bonding interactions are assumed to play a critical role in the long-range transport of light or charge recently observed in supramolecular assemblies of C₃ -symmetrical discotic molecules. Herein, the structure of mixed valence assemblies formed by irradiating triarylamine trisamide (TATA) molecules was determined by multifarious techniques under various conditions with the aim of probing the interplay between the hydrogen bonding network and the rate of electron transport in different states (solution, gel, film). Irradiation was performed under initial states that vary by the degree of association of TATA monomers through hydrogen bonds. Firstly, a significant shift of the N-H and C=O stretching frequencies was observed by FTIR upon irradiation thus revealing an overlooked signature of TATA⋅+ species and interacting mixed valence aggregates. Secondly, gels and films both mostly consist of hydrogen-bonded TATA polymers but their EPR spectra recorded at 293 K reveal very different behaviors: localized electrons in the gels versus fully delocalized electrons in the films. Hydrogen bonding thus appears as a necessary but not sufficient condition to get fast electron transfer rates and a packing of the TATA monomers particularly suitable for charge transport is assumed to exist in the solid state. Finally, defects in the hydrogen bonding network are detected upon increasing the number of radical species in the mixed valence assemblies present in the film state without impeding the delocalization of the unpaired electrons. A delicate balance between hydrogen bonds and packing is thus necessary to get supramolecular polarons in mixed valence TATA assemblies.

En Route to Stabilized Compact Conformations of Single-Chain Polymeric Nanoparticles in Complex Media

Precise control over the folding pathways of polypeptides using a combination of noncovalent and covalent interactions has evolved into a wide range of functional proteins with a perfectly defined 3D conformation. Inspired hereby, we develop a series of amphiphilic copolymers designed to form compact, stable, and structured single-chain polymeric nanoparticles (SCPNs) of defined size, even in competitive conditions. The SCPNs are formed through a combination of noncovalent interactions (hydrophobic and hydrogen-bonding interactions) and covalent intramolecular cross-linking using a light-induced [2 + 2] cycloaddition. By comparing different self-assembly pathways of the nanoparticles, we show that, like for proteins in nature, the order of events matters. When covalent cross-links are formed prior to the folding via hydrophobic and supramolecular interactions, larger particles with less structured interiors are formed. In contrast, when the copolymers first fold via hydrophobic and hydrogen-bonding interactions into compact conformations, followed by covalent cross-links, good control over the size of the SCPNs and microstructure of the hydrophobic interior is achieved. Such a structured SCPN can stabilize the solvatochromic dye benzene-1,3,5-tricarboxamide-Nile Red via molecular recognition for short periods of time in complex media, while showing slow exchange dynamics with the surrounding complex media at longer time scales. The SCPNs show good biocompatibility with cells and can carry cargo into the lysosomal compartments of the cells. Our study highlights the importance of control over the folding pathway in the design of stable SCPNs, which is an important step forward in their application as noncovalent drug or catalyst carriers in biological settings.

Supramolecular Chiral Assembly of Symmetric Molecules with an Extended Conjugated Core

C3-symmetric molecules carrying a conjugated diacetylene (DA) core are found to self-assemble into well-defined supramolecular fibers with enhanced supramolecular chirality in both organic and aqueous solutions. The conjugated core affords these amphiphiles characteristic fluorescence properties, which can be quenched partially due to the aggregation. Integration of the C3-symmetry with the conjugation provides these novel molecules strong aggregation tendency through solvent-mediated π-π stacking with preferential supramolecular chirality, which is predominately related to steric hindrance from their dipeptide pendants. Highly uniform supramolecular fibers of P and M handedness with thickness consistent in the dimensions of individual C3 molecules are obtained. The increase of concentrations induces these fibers to wrap together to form supramolecular fibrous bundles. Topochemical polymerization of the DA moieties can transform these supramolecular fibers into stable covalent polymers. We therefore believe that self-assembly of these C3-symmetric molecules with extended conjugated DA cores provides new prospects for the construction of supramolecular helical fibers through enhanced π-π stacking and creates a convenient strategy to furnish covalent chiral polymers of hierarchical structures through supramolecular assembly.

A supramolecular and liquid crystalline water-based alignment medium based on azobenzene-substituted 1,3,5-benzenetricarboxamides

A supramolecular, lyotropic liquid crystalline alignment medium based on an azobenzene-containing 1,3,5-benzenetricarboxamide (BTA) building block is described and investigated. As we demonstrate, this water-based system is suitable for the investigation of various water-soluble analytes and allows for a scaling of alignment strength through variation of temperature. Additionally, alignment is shown to reversibly collapse above a certain temperature, yielding an isotropic solution. This collapse allows for isotropic reference measurements, which are typically needed in addition to those in an anisotropic environment, to be performed using the same sample just by varying the temperature. The medium described thus provides easy access to anisotropic NMR observables and simplifies structure elucidation techniques based thereon.

Functional Mesostructured Electrospun Polymer Nonwovens with Supramolecular Nanofibers

Functional, hierarchically mesostructured nonwovens are of fundamental importance because complex fiber morphologies increase the active surface area and functionality allowing for the effective immobilization of metal nanoparticles. Such complex functional fiber morphologies clearly widen the property profile and enable the preparation of more efficient and selective filter media. Here, we demonstrate the realization of hierarchically mesostructured nonwovens with barbed wire-like morphology by combining electrospun polystyrene fibers, decorated with patchy worm-like micelles, with solution-processed supramolecular short fibers composed of 1,3,5-benzenetricarboxamides with peripheral N,N-diisopropylaminoethyl substituents. The worm-like micelles with a patchy microphase-separated corona were prepared by crystallization-driven self-assembly of a polyethylene based triblock terpolymer and deposited on top of the polystyrene fibers by coaxial electrospinning. The micelles were designed in a way that their patches promote the directed self-assembly of the 1,3,5-benzenetricarboxamide and the fixation of the supramolecular nanofibers on the supporting polystyrene fibers. Functionality of the mesostructured nonwoven is provided by the peripheral N,N-diisopropylaminoethyl substituents of the 1,3,5-benzenetricarboxamide and proven by the effective immobilization of individual palladium nanoparticles on the supramolecular nanofibers. The preparation of hierarchically mesostructured nonwovens and their shown functionality demonstrate that such systems are attractive candidates to be used for example in filtration, selective separation and heterogenous catalysis. This article is protected by copyright. All rights reserved.

Elucidating the Supramolecular Copolymerization of N- and C-Centered Benzene-1,3,5-Tricarboxamides: The Role of Parallel and Antiparallel Packing of Amide Groups in the Copolymer Microstructure

An in-depth study of the supramolecular copolymerization behavior of N- and C-centered benzene-1,3,5-tricarboxamides (N- and C-BTAs) has been conducted in methylcyclohexane and in the solid state. The connectivity of the amide groups in the BTAs differs, and mixing N- and C-BTAs results in supramolecular copolymers with a blocky microstructure in solution. The blocky microstructure results from the formation of weaker and less organized, antiparallel hydrogen bonds between N- and C-BTAs. In methylcyclohexane, the helical threefold hydrogen-bonding network present in C- and N-BTAs is retained in the mixtures. In the solid state, in contrast, the hydrogen bonds of pure BTAs as well as their mixtures organize in a sheet-like pattern, and in the mixtures long-range order is lost. Drop-casting to kinetically trap the solution microstructures shows that C-BTAs retain the helical hydrogen bonds, but N-BTAs immediately adopt the sheet-like pattern, a direct consequence of the lower stabilization energy of the helical hydrogen bonds. In the copolymers, the stability of the helical aggregates depends on the copolymer composition, and helical aggregates are only preserved when a high amount of C-BTAs is present. The method outlined here is generally applicable to elucidate the copolymerization behavior of supramolecular monomers both in solution as well as in the solid state.

Hierarchical lyotropic liquid crystalline behaviors of supramolecular polymers influenced by alkyl chain branching

The peripheral chain branching in monomeric structures influences the hierarchical supramolecular assembly and lyotropic liquid crystalline properties.

Columnar Aggregates of Azobenzene Stars: Exploring Intermolecular Interactions, Structure, and Stability in Atomistic Simulations

We present a simulation study of supramolecular aggregates formed by three-arm azobenzene (Azo) stars with a benzene-1,3,5-tricarboxamide (BTA) core in water. Previous experimental works by other research groups demonstrate that such Azo stars assemble into needle-like structures with light-responsive properties. Disregarding the response to light, we intend to characterize the equilibrium state of this system on the molecular scale. In particular, we aim to develop a thorough understanding of the binding mechanism between the molecules and analyze the structural properties of columnar stacks of Azo stars. Our study employs fully atomistic molecular dynamics (MD) simulations to model pre-assembled aggregates with various sizes and arrangements in water. In our detailed approach, we decompose the binding energies of the aggregates into the contributions due to the different types of non-covalent interactions and the contributions of the functional groups in the Azo stars. Initially, we investigate the origin and strength of the non-covalent interactions within a stacked dimer. Based on these findings, three arrangements of longer columnar stacks are prepared and equilibrated. We confirm that the binding energies of the stacks are mainly composed of π-π interactions between the conjugated parts of the molecules and hydrogen bonds formed between the stacked BTA cores. Our study quantifies the strength of these interactions and shows that the π-π interactions, especially between the Azo moieties, dominate the binding energies. We clarify that hydrogen bonds, which are predominant in BTA stacks, have only secondary energetic contributions in stacks of Azo stars but remain necessary stabilizers. Both types of interactions, π-π stacking and H-bonds, are required to maintain the columnar arrangement of the aggregates.

Crystal Engineering of Supramolecular 1,4-Benzene Bisamides by Side-Chain Modification - Towards Tuneable Anisotropic Morphologies and Surfaces

Benzene bisamides are promising building blocks for supramolecular nano-objects. Their functionality depends on morphology and surface properties. However, a direct link between surface properties and molecular structure itself is missing for this material class. Here, we investigate this interplay for two series of 1,4-benzene bisamides with symmetric and asymmetric peripheral substitution. We elucidated the crystal structures, determined the nano-object morphologies and derived the wetting behaviour of the preferentially exposed surfaces. The crystal structures were solved by combining single-crystal and powder X-ray diffraction, solid-state NMR spectroscopy and computational modelling. Bulky side groups, here t-butyl groups, serve as a structure-directing motif into a packing pattern, which favours the formation of thin platelets. The use of slim peripheral groups on both sides, in our case linear perfluorinated, alkyl chains, self-assemble the benzene bisamides into a second packing pattern which leads to ribbon-like nano-objects. For both packing types, the preferentially exposed surfaces consist of the ends of the peripheral groups. Asymmetric substitution with bulky and slim groups leads to an ordered alternating arrangement of the groups exposed to the surface. This allows the hydrophobicity of the surfaces to be gradually altered. We thus identified two leitmotifs for molecular packings of benzene bisamides providing the missing link between the molecular structure, the anisotropic morphologies and adjustable surface properties of the supramolecular nano-objects.

Ion polarisation-assisted hydrogen-bonded ferroelectrics in liquid crystalline domains

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal. The introduction of simple M⁺X⁻ salts such as Na⁺PF₆⁻ and K⁺I⁻ into the ionic channel of 1 enhanced the ionic conductivity of the Col_h phase of the M⁺·(1)·X⁻ salts, with the highest ionic conductivity reaching ∼10⁻⁶ S cm⁻¹ for K⁺·(1)·I⁻ and Na⁺·(1)·PF₆⁻ at 460 K, which was approximately 5 orders of magnitude higher than that of 1. The introduction of non-ferroelectric 1 into the ferroelectric N,N′,N′′-tri(tetradecyl)-1,3,5-benzenetricarboxamide (3BC) elicited a ferroelectric response from the mixed Col_h phase of (3BC)_x(1)_1−x with x = 0.9 and 0.8. The further doping of M⁺X⁻ into the ferroelectric Col_h phase of (3BC)_0.9(1)_0.1 enhanced the ferroelectric polarisation assisted by ion displacement in the half-filled ionic channel for the vacant dibenzo[18]crown-6 of (3BC)_0.9[(M⁺)_0.5·(1)·(X⁻)_0.5]_0.1.

An alkylamide-substituted (−NHCOC₁₀H₂₁) hydrogen-bonded dibenzo[18]crown-6 derivative (1) was prepared to stabilise the ionic channel structure in a discotic hexagonal columnar (Col_h) liquid crystal.

Computational prediction of the supramolecular self-assembling properties of organic molecules: the role of conformational flexibility of amide moieties

Two families of organic molecules with different backbones have been considered. The first family is based on a macrolactam-like unit that is constrained in a particular conformation. The second family is composed by a substituted central phenyl that allows a larger mobility for its substituents. They have however a common feature, three amide moieties (within the cycle for the macrolactam-like molecule and as substituents for the phenyl) that permit hydrogen bonding when molecules are stacked. In this study we propose a computational protocol to unravel the ability of the different families to self-assemble into organic nanotubes. Starting from the monomer and going towards larger assemblies like dimers, trimers, and pentamers we applied the different protocols to rationalize the behavior of the different assemblies. Both structures and thermodynamics were investigated to give a complete picture of the process. Thanks to the combination of a quantum mechanics approach and molecular dynamics simulations along with the use of tailored tools (non covalent interaction visualization) and techniques (umbrella sampling), we have been able to differentiate the two families and highlight the best candidate for self-assembling purposes.

Higher-order interfiber interactions in the self-assembly of benzene-1,3,5-tricarboxamide-based peptides in water

Mimicking the complexity of biological systems with synthetic supramolecular materials requires a deep understanding of the relationship between the structure of the molecule and its self-assembly pattern. Herein, we report a series of water-soluble benzene-1,3,5-tricarboxamide-based di- and tripeptide derivatives modified with small non-bulky terminal amine salt to induce self-assembly into twisted one-dimensional higher-order nanofibers. The morphology of nanofibers strongly depends on the nature, order, and quantity of amino acids in the short peptide fragments and vary from simple cylindrical to complex helical. From observations of several fiber-splitting events, we detected interfiber interactions that always occur in a pairwise manner, which implies that the C3 symmetry of benzene-1,3,5-tricarboxamide-based molecules in higher-order fibers becomes gradually distorted, thus facilitating hydrophobic contact interactions between fibrils. The proposed mechanism of self-assembly through hydrophobic contact allowed the successful design of a compound with pH-responsive morphology, and may find use in the future development of complex hierarchical architectures with controlled functionality.

Investigation of the Amide Linkages on Cooperative Supramolecular Polymerization of Organoplatinum(II) Complexes

Cooperative supramolecular polymerization of π-conjugated compounds into one-dimensional nanostructures has received tremendous attentions in recent years. It is commonly achieved by incorporating amide linkages into the monomeric structures, which provide hydrogen bonds for intermolecular non-covalent complexation. Herein, the effect of amide linkages is elaborately studied, by comparing supramolecular polymerization behaviors of two structurally similar monomers with the same platinum(II) acetylide cores. As compared to the N-phenyl benzamide linkages, N-[(1S)-1-phenylethyl] benzamide linkages give rise to effective chirality transfer behaviors due to the closer distances between the chiral units and the platinum(II) acetylide core. They also provide stronger intermolecular hydrogen bonding strength, which consequently brings higher thermo-stability and enhanced gelation capability for the resulting supramolecular polymers. Supramolecular polymerization is further strengthened by varying the monomers from monotopic to ditopic structures. Hence, with the judicious modulation of structural parameters, the current study opens up new avenues for the rational design of supramolecular polymeric systems.

Experimental and computational diagnosis of the fluxional nature of a benzene-1,3,5-tricarboxamide-based hydrogen-bonded dimer

Precise characterization of the hydrogen bond network present in discrete self-assemblies of benzene-1,3,5-tricarboxamide monomers derived from amino-esters (ester BTAs) is crucial for the construction of elaborated functional co-assemblies. For all ester BTA dimeric structures previously reported, ester carbonyls in the side chain acted as hydrogen bond acceptors, yielding well-defined dimers stabilized by six hydrogen bonds. The ester BTA monomer derived from glycine (BTA Gly) shows a markedly different self-assembly behaviour. We report herein a combined experimental and computational investigation aimed at determining the nature of the dimeric species formed by BTA Gly. Two distinct dimeric structures were characterized by single-crystal X-ray diffraction measurements. Likewise, a range of spectroscopic and scattering techniques as well as molecular modelling were employed to diagnose the nature of dynamic dimeric structures in toluene. Our results unambiguously establish that both ester and amide carbonyls are involved in the hydrogen bond network of the discrete dimeric species formed by BTA Gly. The participation of roughly 4.5 ester carbonyls and 1.5 amide carbonyls per dimer as determined by FT-IR spectroscopy implies that several conformations coexist in solution. Moreover, NMR analysis and modelling data reveal rapid interconversion between these different conformers leading to a symmetric structure on the NMR timescale. Rapid hydrogen bond shuffling between conformers having three (three), two (four), one (five) and zero (six) amide carbonyl groups (ester carbonyl groups, respectively) as hydrogen bond acceptors is proposed to explain the magnetic equivalence of the amide N-H on the NMR timescale. When compared to other ester BTA derivatives in which only ester carbonyls act as hydrogen bond acceptors, the fluxional behaviour of the hydrogen-bonded dimers of BTA Gly likely originates from a larger range of energetically favorable conformations accessible through rotation of the BTA side chains.

Competition between chiral solvents and chiral monomers in the helical bias of supramolecular polymers

Solute-solvent interactions are key for the assembly and proper functioning of biomacromolecules and play important roles in many fields of organic and polymer chemistry. Despite numerous reports describing the effects of (chiral) solvents on helical conformations of (supramolecular) polymers, the combination of chiral solvents and chiral monomers is unexplored. Here we report diastereomeric differences in the supramolecular polymerization of enantiomers of chiral triphenylene-2,6,10-tricarboxamides in chiral chlorinated solvents. Competition between the preferences induced by the stereocentres of the assembled monomers and those present in the solvent molecules results in unforeseen temperature-dependent solvation effects. By combining experiments and mathematical modelling, we show that the observed differences between enantiomers originate from the combined additive entropic effects of stereocentres present in the monomer and in the solvent. Remarkably, copolymerizations show that the chiral solvent can bias the copolymer helicity and thereby overrule the helical preference of the monomers. Our results highlight the importance of cumulative solvation effects in supramolecular polymerizations.

Theoretical and Experimental Insights into the Self-Assembly and Ion Response Mechanisms of Tripodal Quinolinamido-Based Supramolecular Organogels

The exploration and understanding of self-assembly and stimuli-responsive mechanisms of supramolecular systems are of fundamental importance for researchers to plan syntheses reasonably. Herein, the self-assembly and ions responsive mechanisms of a tripodal quinolinamido-based supramolecular organogel (TBT-gel) were investigated through experiments and theoretical calculations including independent gradient model (IGM), localized orbitals locator (LOL) and hole-electron theory. According to these studies, the self-assembly mechanism of TBT-gel was based on strong threefold H-bonding and π-π interactions, which induced the TBT forming helical, one-dimensional supramolecular polymer. After addition of Fe³⁺ into the TBT-gel, the one-dimensional supramolecular polymer had been crosslinked by the Fe³⁺ through coordination interaction and formed a metallogel (TBT-Fe-gel). Interestingly, the TBT-gel showed selective fluorescent response for Fe³⁺ and F^- based on a competitive coordination mechanism. Moreover, the study on fluorescence responsive mechanism of TBT-gel for Fe³⁺ and F^- implied the ICT mode governs both the electron excitation and de-excitation processes. The calculated results were in agreement with the corresponding experimental results. Notably, the quantum chemical calculations provided a deep understanding and visualized presentation of the assembly and stimuli-responsive mechanisms.

The recent progress of synergistic supramolecular polymers: preparation, properties and applications

Interactions for forming supramolecular polymers were reviewed together with their unique properties and applications with detailed examples.

Biomimetic hydrogels with spatial- and temporal-controlled chemical cues for tissue engineering

Biomimetic hydrogels have emerged as the most useful tissue engineering scaffold materials. Their versatile chemistry can recapitulate multiple physical and chemical features to integrate cells, scaffolds, and signaling molecules for tissue regeneration. Due to their highly hydrophilic nature hydrogels can recreate nutrient-rich aqueous environments for cells. Soluble regulatory molecules can be incorporated to guide cell proliferation and differentiation. Importantly, the controlled dynamic parameters and spatial distribution of chemical cues in hydrogel scaffolds are critical for cell-cell communication, cell-scaffold interaction, and morphogenesis. Herein, we review biomimetic hydrogels that provide cells with spatiotemporally controlled chemical cues as tissue engineering scaffolds. Specifically, hydrogels with temporally controlled growth factor-release abilities, spatially controlled conjugated bioactive molecules/motifs, and targeting delivery and reload properties for tissue engineering applications are discussed in detail. Examples of hydrogels that possess clinically favorable properties, such as injectability, self-healing ability, stimulus-responsiveness, and pro-remodeling features, are also covered.

Divergent Self-Assembly Pathways to Hierarchically Organized Networks of Isopeptide-Modified Discotics under Kinetic Control

Natural proteins traverse complex free energy landscapes to assemble into hierarchically organized structures, often through stimuli-directed kinetic pathways in response to relevant biological cues. Bioinspired strategies have sought to emulate the complexity, dynamicity, and modularity exhibited in these natural processes with synthetic analogues. However, these efforts are limited by many factors that complicate the rational design and predictable assembly of synthetic constructs, especially in aqueous environments. Herein, a model discotic amphiphile gelator is described that undergoes pathway-dependent structural maturation when exposed to varying application rates of a pH stimulus, investigated by electron microscopy, spectroscopy, and X-ray scattering techniques. Under the direction of a slowly changing pH stimulus, complex hierarchical assemblies result, characterized by mesoscale elongated "superstructure" bundles embedded in a percolated mesh of narrow nanofibers. In contrast, the assembly under a rapidly applied pH stimulus is characterized by homogeneous structures that are reminiscent of the superstructures arising from the more deliberate path, except with significantly reduced scale and concomitantly large increases in bulk rheological properties. This synthetic system bears resemblance to the pathway complexity and hierarchical ordering observed for native structures, such as collagen, and points to fundamental design principles that might be applied toward enhanced control of the properties of supramolecular self-assembly across length scales.

Supramolecular microtubes based on 1,3,5-benzenetricarboxamides prepared by self-assembly upon heating

A series of three 1,3,5-benzenetricarboxamides with peripheral tertiary N,N-dialkyl-ethylamino substituents with different length of the alkyl groups is reported. In particular, the N¹,N³,N⁵-tris[2-(diethylamino)-ethyl]-1,3,5-benzenetricarboxamide exhibits phase separation followed by self-assembly upon heating from aqueous solution into well-defined supramolecular fiber-like structures in the form of microtubes.

Structural Isomerism Effect in Platinum(II) Acetylide-Based Supramolecular Polymers

The self-assembly of π-aromatic organic and organometallic molecules into long-range-ordered supramolecular polymers is dictated by a variety of molecular parameters and external conditions. In this work, structural isomerism, representing one of the potent molecular parameters, has been investigated to modulate the self-assembly behaviors. Two platinum(II) acetylide-based structural isomers, with different N-hexyl substitution positions on the inner benzotriazole core, have been designed. Thanks to the synergistic participation of hydrogen-bonding and π-π-stacking interactions, both platinum(II) acetylide-based compounds are prone to forming supramolecular polymers via a nucleation-elongation cooperative mechanism in apolar media. Thermal hysteresis phenomena are observed for both compounds, suggesting the different supramolecular polymerization pathways upon cooling and heating. Remarkably, in addition to the spectroscopic difference, these two supramolecular polymers display distinct thermostability and rheological moduli, ascribing to different binding enthalpies of the neighboring monomers. Overall, it is evident that a minor variation at the molecular level brings huge differences to the properties of long-range-ordered supramolecular polymers. The current study illustrates the importance of the structural isomerism effect for the rational design of π-functional supramolecular materials.

Photodynamic Control of the Chain Length in Supramolecular Polymers: Switching an Intercalator into a Chain Capper

Supramolecular systems are intrinsically dynamic and sensitive to changes in molecular structure and external conditions. Because of these unique properties, strategies to control polymer length, composition, comonomer sequence, and morphology have to be developed for sufficient control over supramolecular copolymerizations. We designed photoresponsive, mono acyl hydrazone functionalized benzene-1,3,5-tricarboxamide (m-BTA) monomers that play a dual role in the coassembly with achiral alkyl BTAs (a-BTA). In the E isomer form, the chiral m-BTA monomers intercalate into stacks of a-BTA and dictate the chirality of the helices. Photoisomerization to the Z isomer transforms the intercalator into a chain capper, allowing dynamic shortening of chain length in the supramolecular aggregates. We combine optical spectroscopy and light-scattering experiments with theoretical modeling to show the reversible decrease in length when switching from the E to Z isomer of m-BTA in the copolymer with inert a-BTA. With a mass-balance thermodynamic model, we gain additional insights into the composition of copolymers and length distributions of the species over a broad range of concentrations and mixing ratios of a-BTA/m-BTA. Moreover, the model was used to predict the impact of an additive (chain capper and intercalator) on the chain length over a range of concentrations, showing a remarkable amplification of efficiency at high concentrations. By employing a stimuli-responsive comonomer in a mostly inert polymer, we can cooperatively amplify the effect of the switching and obtain photocontrol of polymer length. Moreover, this dynamic decrease in chain length causes a macroscopic gel-to-sol phase transformation of the copolymer gel, although 99.4% of the organogel is inert to the light stimulus.

Sequence-defined l-glutamamide oligomers with pendant supramolecular motifs via iterative synthesis and orthogonal post-functionalization

One of the great challenges in polymer chemistry is to achieve discrete and sequence-defined synthetic polymers that fold in defined conformations and form well-defined three-dimensional structured particles.

Tuning polymer properties of non-covalent crosslinked PDMS by varying supramolecular interaction strength

Linear polydimethylsiloxane (PDMS) is crosslinked by supramolecular grafts to obtain materials with strikingly different mechanical properties by tuning the strength of the non-covalent interactions.

Detailed Approach to Investigate Thermodynamically Controlled Supramolecular Copolymerizations

Elucidating the microstructure of supramolecular copolymers remains challenging, despite the progress in the field of supramolecular polymers. In this work, we present a detailed approach to investigate supramolecular copolymerizations under thermodynamic control. Our approach provides insight into the interactions of different types of monomers and hereby allows elucidating the microstructure of copolymers. We select two monomers that undergo cooperative supramolecular polymerization by way of threefold intermolecular hydrogen bonding in a helical manner, namely, benzene-1,3,5-tricarboxamide (BTA) and benzene-1,3,5-tris(carbothioamide) (thioBTA). Two enantiomeric forms and an achiral analogue of BTA and thioBTA are synthesized and their homo- and copolymerizations are studied using light scattering techniques, infrared, ultraviolet, and circular dichroism spectroscopy. After quantifying the thermodynamic parameters describing the homopolymerizations, we outline a method to follow the self-assembly of thioBTA derivatives in the copolymerization with BTA, which involves monitoring a characteristic spectroscopic signature as a function of temperature and relative concentration. Using modified types of sergeants-and-soldiers and majority-rules experiments, we obtain insights into the degree of aggregation and the net helicity. In addition, we apply a theoretical model of supramolecular copolymerization to substantiate the experimental results. We find that the model describes the two-component system well and allows deriving the hetero-interaction energies. The interactions between the same kinds of monomers (BTA-BTA and thioBTA-thioBTA) are slightly more favorable than those between different monomers (BTA-thioBTA), corresponding to a nearly random copolymerization. Finally, to study the interactions of the monomers at the molecular level, we perform density functional theory-based computations. The results corroborate that the two-component system exhibits a random distribution of the two monomer units along the copolymer chain.

Suppressing depolarization by tail substitution in an organic supramolecular ferroelectric

Despite being very well established in the field of electro-optics, ferroelectric liquid crystals so far lacked interest from a ferroelectric device perspective due to a typically high operating temperature, a modest remnant polarization and/or poor polarization retention. Here, we experimentally demonstrate how simple structural modification of a prototypical ferroelectric liquid-crystal benzene-1,3,5-trisamide (BTA) - introduction of branched-tail substituents - results in materials with a wide operating temperature range and a data retention time of more than 10 years in thin-film solution-processed capacitor devices at room temperature. The observed differences between linear- and branched-tail compounds are analyzed using density functional theory (DFT) and molecular dynamics (MD) simulations. We conclude that morphological factors like improved packing quality and reduced disorder, rather than electrostatic interactions or intra/inter-columnar steric hindrance, underlay the superior properties of the branched-tailed BTAs. Synergistic effects upon blending of compounds with branched and linear side-chains can be used to further improve the materials' characteristics.

Nematic-to-columnar mesophase transition by in situ supramolecular polymerization

Disk- and rod-shaped molecules are incompatible in coassembly, as the former tend to stack one-dimensionally whereas the latter tend to align in parallel. Because this type of incompatibility can be more pronounced in condensed phases, different-shaped molecules generally exclude one another. We report that supramolecular polymerization of a disk-shaped chiral monomer in nematic liquid crystals comprising rod-shaped molecules results in order-increasing mesophase transition into a single mesophase with a core-shell columnar geometry. This liquid crystalline material responds quickly to an applied electric field, resulting in unidirectional columnar ordering. Moreover, it can be modularly customized to be optoelectrically responsive simply by using a photoisomerizable rod-shaped module. The modular strategy allows for cooperative integration of different functions into elaborate dynamic architectures.

Extra hydrogen bonding interactions by peripheral indole groups stabilize benzene-1,3,5-tricarboxamide helical assemblies

Benzene-1,3,5-tricarboxamide monomers derived from alkyl esters of tryptophan (BTA Trp) self-assemble into helices with an inner threefold hydrogen bond network surrounded by a second network involving the indole N-H groups. As a consequence of this extra stabilization of its helical assemblies, BTA Trp forms more viscous solutions than a range of ester and alkyl BTAs.

Preparation of cross-linked supramolecular polymers based on benzo-21-crown-7/secondary ammonium salt host-guest interactions

We found that TC7 not only self-assembles into one-dimensional supramolecular aggregates in chloroform, but also forms cross-linked supramolecular polymers via host-guest complexation between benzo-21-crown-7 and secondary ammonium salts. Compared with one-dimensional linear supramolecular polymers, soft and long viscous fibers were pulled out from a concentrated solution of cross-linked supramolecular polymers as a result of higher viscosity and lower diffusion coefficients.

Molecular modelling of supramolecular one dimensional polymers

Supramolecular polymers exemplify the need to employ several computational techniques to study processes and phenomena occuring at varied length and time scales. Electronic processes, conformational and configurational excitations of small aggregates of chromophoric molecules, solvent effects under realistic thermodynamic conditions and mesoscale morphologies are some of the challenges which demand hierarchical modelling approaches. This review focusses on one-dimensional supramolecular polymers, the mechanism of self-assembly of monomers in polar and non-polar solvents and properties they exhibit. Directions for future work are as well outlined.

Imine-based [2]catenanes in water

We report the efficient condensation of imine-based macrocycles from dialdehyde A and aliphatic diamines B n in pure water. Within the libraries, we identified a family of homologous amphiphilic [2]catenanes, whose self-assembly is primarily driven by the hydrophobic effect. The length and odd-even character of the diamine alkyl linker dictate both the yield and the conformation of the [2]catenanes, whose particular thermodynamic stability further shifts the overall equilibrium in favour of imine condensation. These findings highlight the role played by solvophobic effects in the self-assembly of complex architectures.

Structural water as an essential comonomer in supramolecular polymerization

Although the concept of structural water that is bound inside hydrophobic pockets and helps to stabilize protein structures is well established, water has rarely found a similar role in supramolecular polymers. Water is often used as a solvent for supramolecular polymerization, however without taking the role of a comonomer for the supramolecular polymer structure. We report a low-molecular weight monomer whose supramolecular polymerization is triggered by the incorporation of water. The presence of water molecules as comonomers is essential to the polymerization process. The supramolecular polymeric material exhibits strong adhesion to surfaces, such as glass and paper. It can be used as a water-activated glue, which can be released at higher temperatures and reused many times without losing its performance.

Improving the Folding of Supramolecular Copolymers by Controlling the Assembly Pathway Complexity

A family of amphiphilic, heterograft copolymers containing hydrophilic, hydrophobic, and supramolecular units based on Jeffamine M-1000, dodecylamine, and benzene-1,3,5-tricarboxamide (BTA) motifs, respectively, was prepared via a postfunctionalization approach. The folding of the copolymers in water into nanometer-sized particles was analyzed by a combination of dynamic and static light scattering, circular dichroism spectroscopy, and small-angle neutron scattering. The sample preparation protocol was crucial for obtaining reproducible and consistent results, showing that only full control over the structure and pathway complexity will afford the desired folded structure, a phenomenon similar to protein folding. The results revealed that relatively small changes in the polymer’s graft composition strongly affected the intra- versus intermolecular assembly processes. Depending on the amount of the hydrophobic grafts based on either dodecyl or BTA groups, pronounced behavioral differences were observed for copolymers that comprise similar degrees of hydrophobic content. A high number of BTA grafts (>10%) resulted in the formation of multichain aggregates comprising around six polymer chains. In contrast, for copolymers comprising up to 10% BTA grafts the folding results in nanoparticles that adopt open, sparse conformations and comprise one to two polymer chains. Interestingly, predominantly single-chain polymeric nanoparticles were formed when the copolymer comprised only Jeffamine or Jeffamine and dodecyl grafts. In addition, replacing part of the BTA grafts by hydrophobic dodecyl grafts while keeping the hydrophobic content constant promoted single-chain folding and resulted in the formation of a compact, globular nanoparticle with a more structured interior. Thus, the intra- and intermolecular self-assembly pathways can be directed by carefully tuning the polymer’s hydrophilic–hydrophobic balance in combination with the number of supramolecular grafts.

Cooperativity Scale: A Structure-Mechanism Correlation in the Self-Assembly of Benzene-1,3,5-tricarboxamides

The self-assembly of small and well-defined molecules using noncovalent interactions to generate various nano- and microarchitectures has been extensively studied. Among various architectures, one-dimensional (1-D) nano-objects have garnered significant attention. It has become increasingly evident that a cooperative or nucleation-elongation mechanism of polymerization leads to highly ordered 1-D supramolecular polymers, analogous to shape-persistent biopolymers such as actin. With this in mind, achieving cooperativity in self-assembled structures has been actively pursued with significant success. Only recently, researchers are focusing on the origin of the mechanism at the molecular level in different synthetic systems. Taking a step further, a thorough quantitative structure-mechanism correlation is crucial to control the size, shape, and functions of supramolecular polymers, and this is currently lacking in the literature. Among a plethora of molecules, benzene-1,3,5-tricarboxamides (BTAs) provide a unique combination of important noncovalent interactions such as hydrogen bonding, π-stacking, and hydrophobic interactions, for self-assembly and synthetic ease. Due to the latter, a diverse range of BTA derivatives with all possible structural mutations have been synthesized and studied during the past decade, mainly from our group. With such a large body of experimental results on BTA self-assembly, it is time to embark on a structure-mechanism correlation in this family of molecules, and a first step toward this will form the main focus of this Account. The origin of the cooperative mechanism of self-assembly in BTAs has been ascribed to 3-fold intermolecular hydrogen bonding (HB) between monomers based on density-functional theory (DFT) calculations. The intermolecular hydrogen-bonding interaction forms the central premise of this work, in which we evaluate the effect of different moieties such as alkyl chains, and amino acids, attached to the core amides on the strength of intermolecular HB, which consequently governs the extent of cooperativity (quantified by the cooperativity factor, σ). In addition to this, we evaluate the effect of amide connectivity (C- vs N-centered), the role of solvents, amides vs thioamides, and finally the influence of the benzene vs cyclohexane core on the σ. Remarkably, every subtle structural change in the BTA monomer seems to affect the cooperativity factor in a systematic and rationalizable way. The take home message will be that the cooperativity factor (σ) in the BTA family forms a continuous spectrum from 1 (isodesmic) to <10^-6 (highly cooperative) and it can be tuned based on the appropriate modification of the BTA monomer. We anticipate that these correlations drawn from the BTA series will be applicable to other systems in which HB is the main driving force for cooperativity. Thus, the understanding gained from such correlations on a prototypical self-assembling motif such as BTA will aid in designing more complex systems with distinct functions.

Supramolecular Copolymers: Structure and Composition Revealed by Theoretical Modeling

Supramolecular copolymers, non-covalent analogues of synthetic copolymers, constitute a new and promising class of polymers. In contrast to their covalent counterparts, the details of their mechanism of formation, as well as the factors determining their composition and length, are still poorly understood. Here, the supramolecular copolymerization between two slightly structurally different benzene-1,3,5-tricarboxamide (BTA) monomers functionalized with either oligodimethylsiloxane (oDMSi) or alkyl side chains is unraveled by combining experimental and theoretical approaches. By applying the "sergeant-and-soldiers" approach using circular dichroism (CD) experiments, we are able to obtain detailed insights into the structure and composition of these supramolecular copolymers. Moreover, we observe an unexpected chiral induction upon mixing two independently CD-silent solutions of the achiral (soldier) and chiral (sergeant) monomers. We find that the subtle differences in the chemical structure of the two monomers impact their homopolymerization mechanism: whereas alkyl-BTAs cooperatively self-assemble, oDMSi-BTAs self-assemble in an isodesmic manner. The effect of these mechanistic differences in the supramolecular copolymerization process is investigated as a function of the composition of the two monomers and explicitly rationalized by mathematical modeling. The results show that, at low fractions of oDMSi-BTA sergeants (<10 mol%), the polymerization process is cooperative and the supramolecular helicity is biased toward the helical preference of the sergeant. However, at higher fractions of oDMSi-BTA sergeant (>25 mol%), the isodesmic assembly of the increasing amounts of sergeant becomes more dominant, and different species start to coexist in the copolymerization process. The analysis of the experimental data with a newly developed theoretical model allows us to quantify the thermodynamic parameters, the distribution of different species, and the compositions and stack lengths of the formed supramolecular copolymers existing at various feed ratios of the two monomers.

Unravelling the Pathway Complexity in Conformationally Flexible N-Centered Triarylamine Trisamides

Two families of C3 -symmetrical triarylamine-trisamides comprising a triphenylamine- or a tri(pyrid-2-yl)amine core are presented. Both families self-assemble in apolar solvents via cooperative hydrogen-bonding interactions into helical supramolecular polymers as evidenced by a combination of spectroscopic measurements, and corroborated by DFT calculations. The introduction of a stereocenter in the side chains biases the helical sense of the supramolecular polymers formed. Compared to other C3 -symmetrical compounds, a much richer self-assembly landscape is observed. Temperature-dependent spectroscopy measurements highlight the presence of two self-assembled states of opposite handedness. One state is formed at high temperature from a molecularly dissolved solution via a nucleation-elongation mechanism. The second state is formed below room temperature through a sharp transition from the first assembled state. The change in helicity is proposed to be related to a conformational switch of the triarylamine core due to an equilibrium between a 3:0 and a 2:1 conformation. Thus, within a limited temperature window, a small conformational twist results in an assembled state of opposite helicity.

Solid-Phase Synthesis of Self-Assembling Multivalent π-Conjugated Peptides

We present a completely solid-phase synthetic strategy to create three- and four-fold peptide-appended π-electron molecules, where the multivalent oligopeptide presentation is dictated by the symmetries of reactive handles placed on discotic π-conjugated cores. Carboxylic acid and anhydride groups were viable amidation and imidation partners, respectively, and oligomeric π-electron discotic cores were prepared through Pd-catalyzed cross-couplings. Due to intermolecular hydrogen bonding between the three or four peptide axes, these π-peptide hybrids self-assemble into robust one-dimensional nanostructures with high aspect ratios in aqueous solution. The preparation of these systems via solid-phase methods will be detailed along with their self-assembly properties, as revealed by steady-state spectroscopy and transmission electron microscopy and electrical characterization using field-effect transistor measurements.

Ferroelectric switching and electrochemistry of pyrrole substituted trialkylbenzene-1,3,5-tricarboxamides

We explore a new approach to organic ferroelectric diodes using a benzene‐tricarboxamide (BTA) core connected with C10 alkyl chains to pyrrole groups, which can be polymerized to provide a semiconducting ferroelectric material. The compound possesses a columnar hexagonal liquid crystalline (LC) phase and exhibits ferroelectric switching. At low switching frequencies, an additional process occurs, which leads to a high hysteretic charge density of up to ∼1000 mC/m². Based on its slow rate, the formation of gas bubbles, and the emergence of characteristic polypyrrole absorption bands in the UV–Vis–NIR, the additional process is identified as the oxidative polymerization of pyrrole groups, enabled by the presence of amide groups. Polymerization of the pyrrole groups, which is essential to obtain semiconductivity, is limited to thin layers at the electrodes, amounting to ∼17 nm after cycling for 21 h. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017, 55, 673–683