Metal-Organic Framework (MOF)-Based Materials as Heterogeneous Catalysts for C-H Bond Activation

Continuous-Flow Catalysis Using Phosphine-Metal Complexes on Porous Polymers: Designing Ligands, Pores, and Reactors

Continuous-flow syntheses using immobilized catalysts can offer efficient chemical processes with easy separation and purification. Porous polymers have gained significant interests for their applications to catalytic systems in the field of organic chemistry. The porous polymers are recognized for their large surface area, high chemical stability, facile modulation of surface chemistry, and cost-effectiveness. It is crucial to immobilize transition-metal catalysts due to their difficult separation and high toxicity. Supported phosphine ligands represent a noteworthy system for the effective immobilization of metal catalysts and modulation of catalytic properties. Researchers have been actively pursuing strategies involving phosphine-metal complexes supported on porous polymers, aiming for high activities, durabilities, selectivities, and applicability to continuous-flow systems. This review provides a concise overview of phosphine-metal complexes supported on porous polymers for continuous-flow catalytic reactions. Polymer catalysts are categorized based on pore sizes, including micro-, meso-, and macroporous polymers. The characteristics of these porous polymers are explored concerning their efficiency in immobilized catalysis and continuous-flow systems.

Construction of Indium(III)-Organic Framework Based on a Flexible Cyclotriphosphazene-Derived Hexacarboxylate as a Reusable Green Catalyst for the Synthesis of Bioactive Aza-Heterocycles

The constant demand for eco-friendly methods of synthesizing complex organic compounds inspired researchers to design and develop modern, highly efficient heterogeneous catalytic systems. Herein, In-HCPCP metal-organic framework (SRMIST-1), a heterogeneous Lewis acid catalyst containing less toxic indium and eco-friendly robust cyclotriphosphazene and exhibiting notable chemical and thermal stability, durable catalytic activity, and exceptional reusability was produced through the reaction between indium(III) nitrate hydrate and hexakis(4-carboxylatophenoxy)-cyclotriphosphazene. In the SRMIST-1 structure, secondary building units {InO7} are assembled by a connection of η2- and η1-carboxylic oxo atoms from different HCPCP ligands, forming a three-dimensional network. The occurrence of regularly distributed In(III) sites in SRMIST-1 confers superior reactivity on the catalyst toward the synthesis of 2,3-dihydroquinazolin-4(1H)-ones and 3,4-dihydro-2H-1,2,4-benzothiadiazine-1,1-dioxides by the cyclization reaction of 2-aminobenzamides and 2-aminobenzenesulphonamides with aldehydes under optimized reaction conditions, respectively. The notable features of this method include broad functional group compatibility, low catalyst loading (1-5 mol %), mild reaction conditions, easy workup procedures, good to excellent reaction yields, ethanol as a green solvent, reusability of the catalyst (five cycles), and economic attractiveness, which is mainly due to sustainability of SRMIST-1 as a reusable green catalyst. Our findings demonstrate that the highly reactive and reusable green catalyst finds widespread applications in medicinal chemistry.

Production of eco friendly DME fuel over sonochemically synthesized UiO66 catalyst

The ultrasound-assisted preparation of UiO-66 was carried out at T = 80-220 °C, and the catalytic performances were evaluated in methanol conversion. Also, physicochemical properties were assessed by XRD, SEM, PSD, FTIR, N2 adsorption-desorption, TG-DTG, and NH3-TPD analysis. The characterization proved that increasing the synthesis temperature positively affected the crystallinity, specific surface area, thermal stability, and acidity of the catalysts. Besides, the catalysts' performance was investigated in the methanol conversion reaction (T = 350-450 °C, P = 1 atm, and WHSV = 5 h-1), leading to the DME (Dimethyl Ether) production. Rising reaction temperature increased the methanol conversion and DME yield. The synthesized sample at 220 °C had the best properties and performance with conversion and yield of about 38% and 51%, respectively. The stability test for the UiO-66-220 (University of Oslo 66) catalyst was performed at 450 °C for 12 h, and the activity remained stable for about 5 h. Furthermore, the used catalyst was characterized via XRD and TG analysis.

Heterogeneous MIL-88A on MIL-88B hybrid: A promising eco-friendly hybrid from green synthesis to dual application (Adsorption and photocatalysis) in tetracycline and dyes removal

Herein, the green synthesis of heterogeneous dual functional MIL88A-on-MIL88B hybrids (MIL: Materials InstituteLavoisier) with different amounts of MIL88B compared to MIL88A, including 1:2, 1:1, and 2:1, has been carried out. The photocatalytic degradation of tetracycline and adsorption of tetracycline and dyes (Direct Red 80, Direct Red 23, Acid Blue 92, and Reactive Orange 14) were investigated. Although the ratio of MIL88A-on-MIL88B (1:1) hybrid displayed the best activity, there is a slight difference in the photocatalytic performance of the other mass ratios studied. The result revealed that after 70 min of forming MIL88A on MIL88B, the best pollutant removal performance is obtained. During the limited synthesis time, the lopsided growth of MIL88A on the MIL88B surface limits the formation of sufficient functional groups and new pores between MIL88B as the substrate and MIL88A, which are effective and decisive in the performance. In the photocatalytic studies, the synthesized composite had good compatibility with the zero-order kinetics, and hydroxyl radicals were recognized as the most active species in the photocatalytic reaction. In the adsorption process, the MIL88A-on-MIL88A composite followed pseudo-second-order kinetics and the Langmuir isotherm. Besides, mechanisms such as π-π interaction/stacking, hydrogen bonding, and π-metal interaction were proposed for the pollutant adsorption process.

In Situ Growth of MOF-303 Membranes onto Porous Anodic Aluminum Oxide Substrates for Harvesting Salinity-Gradient Energy

As an emerging metal-organic framework (MOF) material in recent years, the MOF-303 membrane has shown great potential applications in seawater desalination, dehydration, and atmospheric water harvesting. Herein, we report on a dense and uniform MOF-303 membrane fabricated by a facile in situ hydrothermal synthesis approach in the presence of an anodized aluminum oxide (AAO) channel membrane acting as the only Al source and substrate. Interestingly, the MOF-303 isomer can be obtained due to an insufficient amount of organic ligand caused by the less hydrophilic and larger pore size of the AAO substrate. The MOF-based composite membranes possessed surface-charge-governed ionic transport behavior. Moreover, the MOF-303/AAO membrane yielded an output power density of 1.87 W/m2 under a 50-fold KCl concentration gradient. Under a 50-fold gradient of artificial seawater and river water, a maximum power density of 1.46 W/m2 can be obtained. After 30 days of stability testing, the composite membrane still maintained the power output, and the power density was higher than 1.20 W/m2. This work provides a facile and effective strategy for constructing Al-based MOF composite membranes and boosts their applications in harvesting salinity-gradient energy.

Recent advances in the chemistry and applications of fluorinated metal-organic frameworks (F-MOFs)

Metal-organic frameworks are a class of porous crystalline materials based on the ordered connection of metal centers or metal clusters by organic linkers with comprehensive functionalities. The interest in these materials is rapidly moving towards their application in industry and real life. In this context, cheap and sustainable synthetic strategies of MOFs with tailored structures and functions are nowadays a topic widely studied from different points of view. In this review, fluorinated MOFs (F-MOFs) and their applications are investigated. The principal aim is to provide an overview of the structural features and the main application of MOFs containing fluorine atoms both as anionic units or as coordinating elements of more complex inorganic units and, therefore, directly linked to the structural metals or as part of fluorinated linkers used in the synthesis of MOFs. Herein we present a review of F-MOFs reported in the recent literature compared to benchmark compounds published over the last 10 years. The compounds are discussed in terms of their structure and properties according to the aforementioned classification, with an insight into the different chemical nature of the bonds. The application fields of F-MOFs, especially in sustainability related issues, such as harmful gas sorption and separation, will also be discussed. F-MOFs are compounds containing fluorine atoms in their framework and they can be based on: (a) fluorinated metallic or semi-metallic anionic clusters or: (b) fluorinated organic linkers or (c) eventually containing both the building blocks. The nature of a covalent C-F bond in terms of length, charge separation and dipole moment sensibly differs from that of a partly ionic M-F (M = metal) one so that the two classes of materials (points a and b) have different properties and they find various application fields. The study shows how the insertion of polar M-F and C-F bonds in the MOF structure may confer several advantages in terms of interaction with gaseous molecules and the compounds can find application in gas sorption and separation. In addition, hydrophobicity tends to increase compared to non-fluorinated analogues, resulting in an overall improvement in moisture stability.

Modulating the Energetics of C-H Bond Activation in Methane by Utilizing Metalated Porphyrinic Metal-Organic Frameworks

In recent years, much effort has been directed toward utilizing metal-organic frameworks (MOFs) for activating C-H bonds of light alkanes. The energy demanding steps involved in the catalytic pathway are the formation of metal-oxo species and the subsequent cleavage of the C-H bonds of alkanes. With the intention of exploring the tunability of the activation barriers involved in the catalytic pathway of methane hydroxylation, we have employed density functional theory to model metalated porphyrinic MOFs (MOF-525(M)). We find that the heavier congeners down a particular group have high exothermic oxo-formation enthalpies ΔH_O and hence are associated with low N₂O activation barriers. Independent analyses of activation barriers and structure-activity relationship leads to the conclusion that MOF-525(Ru) and MOF-525(Ir) can act as an effective catalysts for methane hydroxylation. Hence, ΔH_O has been found to act as a guide, in the first place, in choosing the optimum catalyst for methane hydroxylation from a large set of available systems.

Influence of 1-Butene Adsorption on the Dimerization Activity of Single Metal Cations on UiO-66 Nodes

Grafting metal cations to missing linker defect sites in zirconium-based metal-organic frameworks, such as UiO-66, produces a uniquely well-defined and homotopic catalytically active site. We present here the synthesis and characterization of a group of UiO-66-supported metal catalysts, M-UiO-66 (M = Ni, Co, Cu, and Cr), for the catalytic dimerization of alkenes. The hydrogen-deuterium exchange via deuterium oxide adsorption followed by infrared spectroscopy showed that the last molecular water ligand desorbs from the sites after evacuation at 300 °C leading to M(OH)-UiO-66 structures. Adsorption of 1-butene is studied using calorimetry and density functional theory techniques to characterize the interactions of the alkene with metal cation sites that are found active for alkene oligomerization. For the most active Ni-UiO-66, the removal of molecular water from the active site significantly increases the 1-butene adsorption enthalpy and almost doubles the catalytic activity for 1-butene dimerization in comparison to the presence of water ligands. Other M-UiO-66 (M = Co, Cu, and Cr) exhibit 1-3 orders of magnitude lower catalytic activities compared to Ni-UiO-66. The catalytic activities correlate linearly with the Gibbs free energy of 1-butene adsorption. Density functional theory calculations probing the Cossee-Arlman mechanism for all metals support the differences in activity, providing a molecular level understanding of the metal site as the active center for 1-butene dimerization.

Crystalline Metal-Peptide Networks: Structures, Applications, and Future Outlook

Metal-peptide networks (MPNs), which are assembled from short peptides and metal ions, are considered one of the most fascinating metal-organic coordinated architectures because of their unique and complicated structures. Although MPNs have considerable potential for development into versatile materials, they have not been developed for practical applications because of several underlying limitations, such as designability, stability, and modifiability. In this review, we summarise several important milestones in the development of crystalline MPNs and thoroughly analyse their structural features, such as peptide sequence designs, coordination geometries, cross-linking types, and network topologies. In addition, potential applications such as gas adsorption, guest encapsulation, and chiral recognition are introduced. We believe that this review is a useful survey that can provide insights into the development of new MPNs with more sophisticated structures and novel functions.

Metal-organic frameworks incorporating azobenzene-based ligands as a heterogeneous Lewis-acid catalyst for cyanosilylation of imines

In this work, two novel metal-organic frameworks (MOFs) were synthesized by the reaction of azobenzene-based ligands and Zn(NO3)2/CdCO3 under solvothermal conditions with the formula of {[Zn2(abtc)(azpy)(H2O)2]·4H2O} n (1) and {[Cd(abtc)0.5(azpy)0.5(H2O)]·3H2O} n (2) (H4abtc = 3,3',5,5'-azobenzene tetracarboxylic acid, azpy = 4,4'-azobipyridine). According to the single-crystal X-ray diffraction (SC-XRD) analysis, complexes 1 and 2 possessed quite similar structures except for the coordination modes of the central metal nodes attributed to the difference between the cationic radius of Zn(ii) and Cd(ii). The Zn(ii) cations in 1 adopted a distorted seesaw coordination geometry and the coordination between Zn(ii) and organic linkers gave two-dimensional (2D) coordination networks, while the Cd(ii) cations in 2 could also bind with the carboxylate groups from neighboring coordination networks to form a three-dimensional (3D) coordination framework. Furthermore, complexes 1 and 2 showed high catalytic activity as heterogeneous Lewis-acid catalysts towards the cyanosilylation of imines with satisfactory reusability under mild conditions and the similar catalytic performance of 1 and 2 could be attributed to the similarity in their structures. A prudent mechanism has been proposed as well to elucidate the role of complexes 1 and 2 in the catalytic process.

Reactive Extrusion Printing for Simultaneous Crystallization-Deposition of Metal-Organic Framework Films

Reactive extrusion printing (REP) is demonstrated as an approach to simultaneously crystallize and deposit films of the metal-organic framework (MOF) Cu3 btc2 (btc=1,3,5-benzenetricarboxylate), also known as HKUST-1. The technique co-delivers inks of the copper(II) acetate and H3 btc starting materials directly on-surface and on-location for rapid nucleation into films at room temperature. The films were analyzed using PXRD, profilometry, SEM and thermal analysis techniques and confirmed high-quality Cu3 btc2 films are produced in low-dispersity interconnected nanoparticulate form. The porosity was examined using gas adsorption which showed REP gives Cu3 btc2 films with open interconnected pore structures, demonstrating the method bestows features that traditional synthesis does not. REP is a technique that opens the field to time-efficient large-scale fabrication of MOF interfaces and should find use in a wide variety of coating application settings.

Metal Nanoparticles as Sustainable Tools for C-N Bond Formation via C-H Activation

The design of highly active metal nanoparticles to be employed as efficient heterogeneous catalysts is a key tool for the construction of complex organic molecules and the minimization of their environmental costs. The formation of novel C-N bonds via C-H activation is an effective atom-economical strategy to access high value materials in pharmaceuticals, polymers, and natural product production. In this contribution, the literature of the last ten years on the use of metal nanoparticles in the processes involving direct C-N bond formation will be discussed. Where possible, a discussion on the role and influence of the support used for the immobilization and/or the metal chosen is reported. Particular attention was given to the description of the experiments performed to elucidate the active mechanism.

Dimensional Reduction of Lewis Acidic Metal-Organic Frameworks for Multicomponent Reactions

Owing to hindered diffusions, the application of porous catalytic materials has been limited to relatively simple organic transformations with small substrates. Herein we report a dimensional reduction strategy to construct a two-dimensional metal-organic framework (MOF), Zr₆OTf-BTB, with 96% accessible Lewis acidic sites as probed by the bulky Lewis base pivalonitrile. With nearly free substrate accessibility, Zr₆OTf-BTB outperformed two three-dimensional MOF counterparts of similar Lewis acidity (Zr₆OTf-BPDC and Zr₆OTf-BTC) in catalyzing sterically hindered multicomponent reactions (MCRs) for the construction of tetrahydroquinoline and aziridine carboxylate derivatives with high turnover numbers (TONs). Zr₆OTf-BTB was also superior to the homogeneous benchmark Sc(OTf)₃ with nearly 14 times higher TON and 9 times longer catalyst lifetime. Furthermore, the topology-activity relationships in these Zr-based Lewis acidic MOFs were rationalized by comparing their Lewis acidity, numbers of Lewis acidic sites, and sterically accessible Lewis acidic sites. Zr₆OTf-BTB was successfully used to construct several bioactive molecules via MCRs with excellent efficiency. This dimensional reduction strategy should allow the development of other MOF catalysts for synthetically useful and complicated organic transformations.

Catalytic C-H Bond Activation and Knoevenagel Condensation Using Pyridine-2,3-Dicarboxylate-Based Metal-Organic Frameworks

Three 1D coordination polymers (CPs) [M(pdca)(H2O)2] n (M = Zn, Cd, and Co; 1-3), and a 3D coordination framework {[(CH3)2NH2][CuK(2,3-pdca)(pa)(NO3)2]} n (4) (2,3-pdca = pyridine-2,3-dicarboxylate and pa = picolinic acid), have been synthesized adopting a solvothermal reaction strategy. The CPs have been thoroughly characterized using various spectral techniques, that is, elemental analyses, FT-IR, TGA, DSC, UV/vis, and luminescence. Structural information on 1-4 was obtained by PXRD and X-ray single-crystal analyses, whereas morphological insights were attained through FESEM, AFM, EDX, HRTEM, and BET surface area analyses. Roughness parameters were calculated from AFM analysis, whereas dimensions of small domains and interplanar spacing were defined with the aid of HRTEM. CPs 1-3 are 1D isostructural networks, whereas 4 is a 3D framework. Moreover, 1-4 display moderate luminescence at rt. In addition, 1-4 have been applied as economic and efficient porous catalysts for the Knoevenagel condensation reaction and C-H bond activation under mild conditions with good yields (95-98 and 97-99%), respectively. Notably, 1-3 can be reused up to seven cycles, whereas 4 can be reused up to five catalytic cycles with retained catalytic efficiency. Relative catalytic efficacy toward the Knoevenagel condensation reaction follows in the order 2 > 1 > 3 > 4, whereas 2 > 4 > 1 > 3 for C-H activation. The present result demonstrates synthetic, structural, optical, morphological, and catalytic aspects of 1-4.

HKUST-1 Metal Organic Framework as an Efficient Dual-Function Catalyst: Aziridination and One-Pot Ring-Opening Transformation for Formation of β-Aryl Sulfonamides with C-C, C-N, C-S, and C-O Bonds

Metal-organic frameworks (MOFs) are extensively used in catalysis due to their robust structure, well-defined periodic reaction centers, and high porosity. We report Cu₃(BTC)₂·(H₂O)₃ (HKUST-1) as an efficient heterogeneous catalyst for aziridination of alkene and ring-opening reaction of activated aziridines. Furthermore, we demonstrate that the transfer of a nitrogen group from PhINTs to olefins and its analogue to give aziridines takes place at the coordinatively unsaturated Cu(II) site of Cu₃(BTC)₂-MOF; however, the ring opening of activated aziridines is controlled by the Cu(II) Lewis acid site, and generation of coordinative unsaturation by thermal activation of the MOF is not necessarily important. The key advantage of this catalytic approach is the direct formation of C-C, C-N, C-O, and C-S bonds yielding β-aryl sulfonamide derivatives through a simultaneous aziridination ring-opening reaction of the alkene in one pot using a single catalyst.

Metal-Organic Frameworks in Oxidation Catalysis with Hydrogen Peroxide

In recent years, metal–organic frameworks (MOFs) have received increasing attention as selective oxidation catalysts and supports for their construction. In this short review paper, we survey recent findings concerning use of MOFs in heterogeneous liquid-phase selective oxidation catalysis with the green oxidant–aqueous hydrogen peroxide. MOFs having outstanding thermal and chemical stability, such as Cr(III)-based MIL-101, Ti(IV)-based MIL-125, Zr(IV)-based UiO-66(67), Zn(II)-based ZIF-8, and some others, will be in the main focus of this work. The effects of the metal nature and MOF structure on catalytic activity and oxidation selectivity are analyzed and the mechanisms of hydrogen peroxide activation are discussed. In some cases, we also make an attempt to analyze relationships between liquid-phase adsorption properties of MOFs and peculiarities of their catalytic performance. Attempts of using MOFs as supports for construction of single-site catalysts through their modification with heterometals will be also addressed in relation to the use of such catalysts for activation of H2O2. Special attention is given to the critical issues of catalyst stability and reusability. The scope and limitations of MOF catalysts in H2O2-based selective oxidation are discussed.

Efficient and Selective Visible-Light-Driven Oxidative Coupling of Amines to Imines in Air over CdS@Zr-MOFs

Construction of porous photoactive MOF-based composite systems is regarded as one of the most effective strategies to improve light harvesting, increase the surface area, provide plenty of exposed active sites, and promote the reduction and oxidation abilities of some organic photocatalytic reactions. Herein, we synthesized porous CdS@Zr-MOF photocatalysts based on the representative photocatalyst CdS and crystalline Zr-MOFs, such as MOF-808, NU-1000, and PCN-222, to illustrate their excellent photocatalytic performance for the synthesis of imines in air. The morphology and composition of these photocatalysts were investigated by X-ray powder diffraction (XRD), inductively coupled plasma-atomic emission spectrometry (ICP-AES), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS), indicating their crystallinity, high porosity, and interfacial interaction between constituents. Compared with individual components, these porous CdS@Zr-MOF composites could remarkably promote photocatalytic activity for the oxidative coupling of amines under air and visible-light conditions. The photocatalytic reaction showed broad substrate suitability. More importantly, the conversion yield reached up to 95% for the inactive aliphatic amines, and imines were formed as the single product. The improvement of the photocatalytic performance of CdS@Zr-MOF composites can be mainly ascribed to their high surface areas, more exposed active sites, excellent dispersion of CdS, and special porous photocatalytic systems, which tune the band gap, broaden the light response range, and facilitate the carrier separation.

A three-component monooxygenase from Rhodococcus wratislaviensis may expand industrial applications of bacterial enzymes

The high-valent iron-oxo species formed in the non-heme diiron enzymes have high oxidative reactivity and catalyze difficult chemical reactions. Although the hydroxylation of inert methyl groups is an industrially promising reaction, utilizing non-heme diiron enzymes as such a biocatalyst has been difficult. Here we show a three-component monooxygenase system for the selective terminal hydroxylation of α-aminoisobutyric acid (Aib) into α-methyl-D-serine. It consists of the hydroxylase component, AibH1H2, and the electron transfer component. Aib hydroxylation is the initial step of Aib catabolism in Rhodococcus wratislaviensis C31-06, which has been fully elucidated through a proteome analysis. The crystal structure analysis revealed that AibH1H2 forms a heterotetramer of two amidohydrolase superfamily proteins, of which AibHm2 is a non-heme diiron protein and functions as a catalytic subunit. The Aib monooxygenase was demonstrated to be a promising biocatalyst that is suitable for bioprocesses in which the inert C–H bond in methyl groups need to be activated.

Makoto Hibi et al. report a novel three-component monooxygenase system in Rhodococcus wratislaviensis. This enzyme catalyzes the activation of an inert C–H bond and may be potentially important as a biocatalyst for industrial applications.

Function-Topology Relationship in the Catalytic Hydrolysis of a Chemical Warfare Simulant in Two Zr-MOFs

Owing to their high surface area, high concentration of active metal sites, and water stability, zirconium(VI)-based metal-organic frameworks (Zr-MOFs) have shown excellent activity in the hydrolysis of organophosphorus nerve agents (OPNs). In this regard, for the first time, two topologically different Zr-MOFs (Zr-fcu-tmuc and Zr-bcu-tmuc, constructed from the same organic and inorganic building blocks; fcu=face-centered cubic, bcu=body-centered cubic) have been rationally chosen to investigate the effect of network topology on the catalytic hydrolysis of the nerve agent simulant, dimethyl 4-nitrophenyl phosphate (DMNP). A remarkable enhancement in the hydrolysis rate of DMNP was observed with Zr-bcu-tmuc, reducing the half-life more than three-fold compared with Zr-fcu-tmuc. Greater accessibility of the active Zr^VI sites in the 8-connected bcu net compared with the 12-connected fcu leads to a faster hydrolysis of DMNP on Zr-bcu-tmuc. Interestingly, the higher activity of Zr-bcu-tmuc was also confirmed by its higher fluorescence sensitivity towards DMNP (limit of detection (LOD)=0.557 μm) compared with Zr-fcu-tmuc (LOD=1.09 μm). The results show that controlling the desired topology of Zr-MOFs is a useful strategy for improving their performance in the detection and catalytic detoxification of OPNs.

Paramagnetic Ionic Liquid/Metal Organic Framework Composites for CO2/CH4 and CO2/N2 Separations

Global warming is arguably the biggest scientific challenge of the twenty-first century and its environmental consequences are already noticeable. To mitigate the emissions of greenhouse gases, particularly of CO₂, there is an urgent need to design materials with improved adsorbent properties. Five different magnetic ionic liquids were impregnated into the metal–organic framework ZIF-8. The composites were produced by a direct-contact method, and their performance as sorbents for gas separation applications was studied. The impact of the ionic liquid anion on the sorption capacity and ideal CO₂/CH₄ and CO₂/N₂ selectivities were studied, focusing on understanding the influence of metal atom and ligand on the adsorbent properties. Reproducible methodology, along with rigorous characterization, were established to assess the impact of the ionic liquid on the performance of the composite materials. Results show that the ionic liquid was well-impregnated, and the ZIF-8 structure was maintained after ionic liquid impregnation. The produced composites were of microporous nature and were thermally stable. CO₂, CH₄, and N₂ adsorption–desorption isotherms were obtained at 303 K and between 0 and 16 bar. The adsorption-desorption data of the composites were compared with that obtained for original ZIF-8. The general trend in composites is that the increased gas uptake per available pore volume compensates the pore volume loss. Adsorption data per unit mass showed that composites have reversible sorption, but inferior gas uptake at all pressure ranges. This is due to the observed total pore volume loss by the ionic liquid pore occupation/blockage. In most cases, composites showed superior selectivity performance at all pressure range. In particular, the composite [C₄MIM]₂[MnCl₄]@ZIF-8 shows a different low-pressure selectivity trend from the original MOF, with a 33% increase in the CO₂/N₂ selectivity at 1 bar and 19% increase in the CO₂/CH₄ selectivity at 10 bar. This material shows potential for use in a post-combustion CO₂ capture application that can contribute to greenhouse gas mitigation.

A conductive metal-organic framework photoanode

We report the development of photosensitizing arrays based on conductive metal–organic frameworks (MOFs) that enable light harvesting and efficient charge separation. Zn₂TTFTB (TTFTB = tetrathiafulvalene tetrabenzoate) MOFs are deposited directly onto TiO₂ photoanodes and structurally characterized by pXRD and EXAFS measurements. Photoinduced interfacial charge transfer dynamics are investigated by combining time-resolved THz spectroscopy and quantum dynamics simulations. Sub-600 fs electron injection into TiO₂ is observed for Zn₂TTFTB–TiO₂ and is compared to the corresponding dynamics for TTFTB–TiO₂ analogues that lack the extended MOF architecture. Rapid electron injection from the MOF into TiO₂ is enhanced by facile migration of the hole away from the interfacial region. Holes migrate through strongly coupled HOMO orbitals localized on the tetrathiafulvalene cores of the columnar stacks of the MOF, whereas electrons are less easily transferred through the spiral staircase arrangement of phenyl substituents of the MOF. The reported findings suggest that conductive MOFs could be exploited as novel photosensitizing arrays in applications to slow, and thereby make difficult, photocatalytic reactions such as those required for water-splitting in artificial photosynthesis.

We report the development of photosensitizing arrays based on conductive metal–organic frameworks (MOFs) that enable light harvesting and efficient charge separation.

Electronic Structure Modeling of Metal-Organic Frameworks

Owing to their molecular building blocks, yet highly crystalline nature, metal-organic frameworks (MOFs) sit at the interface between molecule and material. Their diverse structures and compositions enable them to be useful materials as catalysts in heterogeneous reactions, electrical conductors in energy storage and transfer applications, chromophores in photoenabled chemical transformations, and beyond. In all cases, density functional theory (DFT) and higher-level methods for electronic structure determination provide valuable quantitative information about the electronic properties that underpin the functions of these frameworks. However, there are only two general modeling approaches in conventional electronic structure software packages: those that treat materials as extended, periodic solids, and those that treat materials as discrete molecules. Each approach has features and benefits; both have been widely employed to understand the emergent chemistry that arises from the formation of the metal-organic interface. This Review canvases these approaches to date, with emphasis placed on the application of electronic structure theory to explore reactivity and electron transfer using periodic, molecular, and embedded models. This includes (i) computational chemistry considerations such as how functional, k-grid, and other model variables are selected to enable insights into MOF properties, (ii) extended solid models that treat MOFs as materials rather than molecules, (iii) the mechanics of cluster extraction and subsequent chemistry enabled by these molecular models, (iv) catalytic studies using both solids and clusters thereof, and (v) embedded, mixed-method approaches, which simulate a fraction of the material using one level of theory and the remainder of the material using another dissimilar theoretical implementation.

A Woven Supramolecular Metal-Organic Framework Comprising a Ruthenium Bis(terpyridine) Complex and Cucurbit[8]uril: Enhanced Catalytic Activity toward Alcohol Oxidation

The self-assembly of a diamondoid woven supramolecular metal-organic framework wSMOF-1 has been achieved from intertwined [Ru(tpy)₂ ]²⁺ (tpy=2,2',6',2''-terpyridine) complex M1 and cucurbit[8]uril (CB[8]) in water, where the intermolecular dimers formed by the appended aromatic arms of M1 are encapsulated in CB[8]. wSMOF-1 exhibits ordered pore periodicity in both water and the solid state, as confirmed by a combination of ¹ H NMR spectroscopy, UV-vis absorption, isothermal titration calorimetry, dynamic light scattering, small angle X-ray scattering and selected area electron diffraction experiments. The woven framework has a pore aperture of 2.1 nm, which allows for the free access of both secondary and primary alcohols and tert-butyl hydroperoxide (TBHP). Compared with the control molecule [Ru(tpy)₂ ]Cl₂ , the [Ru(tpy)₂ ]²⁺ unit of wSMOF-1 exhibits a remarkably higher heterogeneous catalysis activity for the oxidation of alcohols by TBHP in n-hexane. For the oxidation of 1-phenylethan-1-ol, the yield of acetophenone was increased from 10 % to 95 %.

Semiconductive microporous hydrogen-bonded organophosphonic acid frameworks

Herein, we report a semiconductive, proton-conductive, microporous hydrogen-bonded organic framework (HOF) derived from phenylphosphonic acid and 5,10,15,20-tetrakis[p-phenylphosphonic acid] porphyrin (GTUB5). The structure of GTUB5 was characterized using single crystal X-ray diffraction. A narrow band gap of 1.56 eV was extracted from a UV-Vis spectrum of pure GTUB5 crystals, in excellent agreement with the 1.65 eV band gap obtained from DFT calculations. The same band gap was also measured for GTUB5 in DMSO. The proton conductivity of GTUB5 was measured to be 3.00 × 10-6 S cm-1 at 75 °C and 75% relative humidity. The surface area was estimated to be 422 m2 g-1 from grand canonical Monte Carlo simulations. XRD showed that GTUB5 is thermally stable under relative humidities of up to 90% at 90 °C. These findings pave the way for a new family of organic, microporous, and semiconducting materials with high surface areas and high thermal stabilities.

Highly Efficient Bifunctional Amide Functionalized Zn and Cd Metal Organic Frameworks for One-Pot Cascade Deacetalization-Knoevenagel Reactions

A pyridine-based amide functionalized tetracarboxylic acid, 5,5'-(pyridine-2, 6-dicarbonyl)bis(azanediyl)}diisophthalic acid (H₄L), was synthesized and its coordination chemistry toward zinc(II) and cadmium(II) ions was studied. The reactions of H₄L with Zn(NO₃)₂.6H₂O and Cd(NO₃)₂.4H₂O led to its full or partial deprotonation, respectively, and the formation of the 2D coordination polymers [Zn₂(L)(H₂O)₄]_n.4n(H₂O) (1) and [Cd₃(HL)₂(DMF)₄]_n.4n(DMF) (2) (DMF = N,N'-dimethylformamide), respectively. They were characterized by elemental analysis, FT-IR, photoluminescence, thermogravimetry, and single-crystal and powder X-ray diffraction. In 1, the L^4- ligand is planar with every carboxylate anion binding a Zn(II) cation and giving rise to a 2D grid with the metals with tetrahedral environments. In 2, the combination of bridging HL^3- and dimethylformamide to form trinuclear Cd(II) clusters engenders secondary building block units and generates a layer-type 2D network with the metals with octahedral and pentagonal bipyramid coordination geometries. The topological analyses of 1 and 2 reveal 2,4-connected and 3,6-connected binodal nets, respectively. On account of the presence of Lewis acid (Zn or Cd centers) as well as basic (uncoordinated pyridine and amide groups) sites, 1 and (to a much lower extent) 2 effectively catalyze the one-pot cascade deacetalization-Knoevenagel condensation reactions under quite mild conditions. They act as heterogeneous catalysts, being easy to recover and recycle without losing activity.

Tools for Prescreening the Most Active Sites on Ir and Rh Clusters toward C-H Bond Cleavage of Ethane: NBO Charges and Wiberg Bond Indexes

B3LYP calculations were carried out to study the insertion of iridium (Ir) and rhodium (Rh) clusters into a C-H bond of ethane, which is often the rate-limiting step of the catalytic cycle of oxidative dehydrogenation of ethane. Our previous research on Ir catalysis correlates the diffusivity of the lowest unoccupied molecular orbital of the Ir clusters and the relative activities of the various catalytic sites. The drawback of this research is that the molecular orbital visualization is qualitative rather than quantitative. Therefore, in this study on C-H bond activation by the Ir and Rh clusters, we conducted analyses of natural bond orbital (NBO) charges and Wiberg bond indexes (WBIs), both of which are not only quantitative but also independent of the basis sets. We found strong correlation between the NBO charges, the WBIs, and the relative activities of the various catalytic sites on the Ir and Rh clusters. Analyses of the NBO charges and the WBIs provide a fast and reliable means of prescreening the most active sites on the Ir and Rh clusters and potentially on other similar transition-metal clusters that activate the C-H bonds of ethane and other light alkanes.