Green Processing of Lignocellulosic Biomass and Its Derivatives in Deep Eutectic Solvents

High-Value Utilization of Cellulose: Intriguing and Important Effects of Hydrogen Bonding Interactions─A Mini-Review

Cellulose has been widely used in papermaking, textile, and chemical industries due to its diverse sources, environmental friendliness, and renewability. Recently, much more attention has been paid to converting cellulose into high-value-added products. Therefore, the extraction of nanocellulose, the dissolution of cellulose, and their applications are some of the most important research topics currently. However, cellulose's dense hydrogen bond network poses challenges for efficient extraction and dissolution, limiting its potential for functional material development. This review discusses the mechanisms of hydrogen bond disruption and weak interactions during nanocellulose extraction and cellulose dissolution. Key challenges and future research directions are highlighted, emphasizing developing efficient, ecofriendly, and cost-effective methods. Additionally, this review provides theoretical insights for constructing high-performance cellulose-based materials.

Deep eutectic solvent (TMAH·5H2O/Urea) with low viscosity for cellulose dissolution at room temperature

A deep eutectic solvent (DES) formulated with tetramethylammonium hydroxide pentahydrate /urea (TMAH·5H2O/Urea) was designed for the first time to dissolve cellulose at room temperature. The optimized system, characterized by a 1:3 M ratio, demonstrates the capability to dissolve approximately 7.5 wt% cellulose, boasting a high degree of polymerization (DP = 526). Notably, both the pure DES and 4.0 wt% cellulose/TMAH·5H2O/Urea mixtures manifests low viscosity, establishing its potential as an effective spinning aid in fiber manufacturing. The structural analyses shows that the cellulose crystal type shifts from type I to type II form, accompanied by a reduction in both crystallinity and DP. A pivotal aspect of this research involves determining Kamlet-Taft parameters for TMAH·5H2O/Urea-DES with different molar ratios. The results reveal these solvate DESs exhibit the high hydrogen bond basicity, which enables them to easily form hydrogen bonds with hydroxyl groups of cellulose and demonstrate good cellulose solubility. In conclusion, this solvent system presents notable advantages, including straightforward synthesis procedures, low viscosity, and well cellulose solubility, paving the way for new approaches and techniques in cellulose utilization.

Exploring the versatility of biodegradable biomass aerogels: In-depth evaluation of Firmiana simplex bark microfibers depolymerized by deep eutectic solvent

In this study, we investigated the use of deep eutectic solvents (DESs) at different molar ratios and temperatures as a green and efficient approach for microfibers (MFs) extraction. Our approach entailed the utilization of Firmiana simplex bark (FSB) fibers, enabling the production of different dimensions of FSB microfibers (FSBMFs) by combining DES pretreatment and mechanical disintegration technique. The proposed practice demonstrates the simplicity and effectiveness of the method. The morphology of the prepared microfibers was studied using the Scanning electron microscopic (SEM) technique. Additionally, the results revealed that the chemical and mechanical treatments did not significantly alter the well-preserved cellulose structure of microfibers, and a crystallinity index of 56.6 % for FSB fibers and 63.8 % for FSBMFs was observed by X-ray diffraction (XRD) analysis. Furthermore, using the freeze-drying technique, FSBMFs in water solutions produced effective aerogels for air purification application. In comparison to commercial mask (CM), FSBMF aerogels' superior hierarchical cellular architectures allowed them to attain excellent filtration efficiencies of 94.48 % (PM10) and 91.51 % (PM2.5) as well as excellent degradation properties were analyzed. The findings show that FSBMFs can be extracted from Firmiana simplex bark, a natural cellulose-rich material, using DES for environmentally friendly aerogel preparation and applications.

Bioactive composite films with improved antioxidant and barrier properties prepared from sodium alginate and deep eutectic solvent treated distillers' grains

In this work, a straightforward approach utilizing distillers' grains (DG) waste and sodium alginate (SA) was developed to prepare functional and bioactive packaging films. Deep eutectic solvents (DESs) were initially synthesized from choline chloride (CO), betaine (BO), glycerol (GO), and oxalic acid. Composite films were then prepared from DES-treated DG slurry and SA at different ratios. Characterization and analysis revealed that adding 75 % CO-treated DG slurry reduced the water vapor permeability (WVP) by over 66 % compared to that of the SA film. Composite films containing CO/BO-treated DG slurry had an ultraviolet light barrier rate exceeding 99 %, while those with 75 % DES-treated DG slurry demonstrated excellent antioxidant activity, with a 2,2'-azino-bis-(3-ethylbenzthiazoline-6-sulfonic acid) (ABTS) free radical scavenging rate of 80.14 %-88.35 %, representing a 322.45 %-365.73 % increase compared to that of the pure SA film. These composite films also exhibited favorable mechanical properties (31.58 MPa, 5.53 % EB), thermal stability, and biodegradability, extending the shelf life of grapes by 1.8 times. In conclusion, bioactive composite films derived from DES-treated DG are expected to replace petroleum-based plastics, enhancing sustainable biomass use and environmental responsibility.

Voronoi Tessellation as a Tool for Predicting the Formation of Deep Eutectic Solvents

Deep eutectic solvents (DESs) have attracted increasing attention in recent years due to their broad applicability in different fields, but their computer-aided discovery, which avoids a time-consuming trial-and-error investigation, is still lagging. In this paper, a set of nine DESs, composed of choline chloride as a hydrogen-bond acceptor and nine functionalized phenols as hydrogen bond donors, is simulated by using classical molecular dynamics to investigate the possible formation of a DES. The tool of the Voronoi tessellation analysis is employed for producing an intuitive and straightforward representation of the degree of mixing between the different components of the solutions, therefore permitting the definition of a metric quantifying the propensity of the components to produce a uniform solution. The computational findings agree with the experimental results, thus confirming that the Voronoi tessellation analysis can act as a lightweight yet powerful approach for the high-throughput screening of mixtures in the optics of the new DES design.

Alternative Assisted Extraction Methods of Phenolic Compounds Using NaDESs

A renewed understanding of eco-friendly principles is moving the industrial sector toward a shift in the utilization of less harmful solvents as a main strategy to improve manufacturing. Green analytical chemistry (GAC) has definitely paved the way for this transition by presenting green solvents to a larger audience. Among the most promising, surely DESs (deep eutectic solvents), NaDESs (natural deep eutectic solvents), HDESs (hydrophobic deep eutectic solvents), and HNaDESs (hydrophobic natural deep eutectic solvents), with their unique features, manifest a wide-range of applications, including their use as a means for the extraction of small bioactive compounds. In examining recent advancements, in this review, we want to focus our attention on some of the most interesting and novel 'solvent-free' extraction techniques, such as microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) in relation to the possibility of better exploiting DESs and NaDESs as plausible extracting solvents of the phenolic compounds (PCs) present in different matrices from olive oil components, such as virgin olive pomace, olive leaves and twigs, virgin and extra virgin olive oil (VOO and EVOO, respectively), and olive cake and olive mill wastewaters (OMWW). Therefore, the status of DESs and NaDESs is shown in terms of their nature, efficacy and selectivity in the extraction of bioactive phytochemicals such as secoiridoids, lignans, phenolic acids and alcohols. Related studies on experimental design and processes' optimization of the most promising DESs/NaDESs are also reviewed. In this framework, an extensive list of relevant works found in the literature is described to consider DESs/NaDESs as a suitable alternative to petrochemicals in cosmetics, pharmaceutical, or food applications.

Novel supramolecular deep eutectic solvent pretreatment for obtaining fluorescent lignin and promoting biomass pyrolytic saccharification

In this study, β-CD was used as a receptor to prepare three novel SDES, which were used to pretreat corn stalks for obtaining fluorescent lignin and promoting biomass pyrolytic saccharification. It was found that GA-residue had a high cellulose retention ratio (94.63%) and the highest lignin removal ratio (61.78%). Besides, the yield of carbohydrates in bio-oil was increased from 0.63% to 49.37%, and fluorescent lignin was prepared for explosion detection, fluorescent film, and information encryption. It was confirmed that the weak interaction between β-CD and HBDs or dimer was mainly performed by hydrogen bond and van der Waals force. The minimum frontier orbital energy difference ΔEU (0.1976 a.u.) and high binding energy (-5456.71 kJ/mol) between molecules were calculated by DFT. Moreover, the mechanism of biomass pretreatment was explored. The green and efficient SDES developed in this study were of great significance for biomass pretreatment and efficient utilization of components.

Application of cellulose to chromatographic media: Cellulose dissolution, and media fabrication and derivatization

As the cornerstone of chromatographic technology, the development of high-performance chromatographic media is a crucial means to enhance the purification efficiency of biological macromolecules. Cellulose is a popular biological separation medium due to its abundant hydroxyl group on the surface, easy modification and, weak non-specific adsorption. In this paper, the development of cellulosic solvent systems, typical preparation methods of cellulosic chromatographic media, and the enhancement of chromatographic properties of cellulosic chromatographic media by polymeric ligand grafting strategies and their mechanism of action are reviewed. Ultimately, based on the current research status, a promising outlook for the preparation of high-performance cellulose-based chromatographic media was presented.

Dissolution mechanism of cellulose in a benzyltriethylammonium/urea deep eutectic solvent (DES): DFT-quantum modeling, molecular dynamics and experimental investigation

In this paper, a benzyltriethylammonium/urea DES was investigated as a new green and eco-friendly medium for the progress of organic chemical reactions, particularly the dissolution and the functionalization of cellulose. In this regard, the viscosity-average molecular weight of cellulose (M̄w) during the dissolution/regeneration process was investigated, showing no significant degradation of the polymer chains. Moreover, X-ray diffraction patterns indicated that the cellulose dissolution process in the BTEAB/urea DES decreased the crystallinity index from 87% to 75%, and there was no effect on type I cellulose polymorphism. However, a drastic impact of the cosolvents (water and DMSO) on the melting point of the DES was observed. Besides, to understand the evolution of cellulose-DES interactions, the formation mechanism of the system was studied in terms of H-bond density and radial distribution function (RDF) using molecular dynamics modeling. Furthermore, density functional theory (DFT) was used to evaluate the topological characteristics of the polymeric system such as potential energy density (PED), laplacian electron density (LED), energy density, and kinetic energy density (KED) at bond critical points (BCPs) between the cellulose and the DES. The quantum theory of atoms in molecules (AIM), Bader's quantum theory (BQT), and reduced density gradient (RDG) scatter plots have been exploited to estimate and locate non-covalent interactions (NCIs). The results revealed that the dissolution process is attributed to the physical interactions, mainly the strong H-bond interactions.

Molecular Guide for Selecting Green Deep Eutectic Solvents with High Monosaccharide Solubility for Food Applications

Monosaccharides play a vital role in the human diet due to their interesting biological activity and functional properties. Conventionally, sugars are extracted using volatile organic solvents (VOCs). Deep eutectic solvents (DESs) have recently emerged as a new green alternative to VOCs. Nonetheless, the selection criterion of an appropriate DES for a specific application is a very difficult task due to the designer nature of these solvents and the theoretically infinite number of combinations of their constituents and compositions. This paper presents a framework for screening a large number of DES constituents for monosaccharide extraction application using COSMO-RS. The framework employs the activity coefficients at infinite dilution (γ_i^∞) as a measure of glucose and fructose solubility. Moreover, the toxicity analysis of the constituents is considered to ensure that selected constituents are safe to work with. Finally, the obtained viscosity predictions were used to select DESs that are not transport-limited. To provide more insights into which functional groups are responsible for more effective monosaccharide extraction, a structure-solubility analysis was carried out. Based on an analysis of 212 DES constituents, the top-performing hydrogen bond acceptors were found to be carnitine, betaine, and choline chloride, while the top-performing hydrogen bond donors were oxalic acid, ethanolamine, and citric acid. A research initiative was presented in this paper to develop robust computational frameworks for selecting optimal DESs for a given application to develop an effective DES design strategy that can aid in the development of novel processes using DESs.

Eco-Friendly Methods for Extraction and Modification of Cellulose: An Overview

Cellulose is the most abundant renewable polymer on Earth and can be obtained from several different sources, such as trees, grass, or biomass residues. However, one of the issues is that not all the fractionation processes are eco-friendly and are essentially based on cooking the lignocellulose feedstock in a harsh chemical mixture, such as NaOH + Na₂S, and water, to break loose fibers. In the last few years, new sustainable fractionation processes have been developed that enable the obtaining of cellulose fibers in a more eco-friendly way. As a raw material, cellulose's use is widely known and established in many areas. Additionally, its products/derivatives are recognized to have a far better environmental impact than fossil-based materials. Examples are textiles and packaging, where forest-based fibers may contribute to renewable and biodegradable substitutes for common synthetic materials and plastics. In this review, some of the main structural characteristics and properties of cellulose, recent green extraction methods/strategies, chemical modification, and applications of cellulose derivatives are discussed.

Ionic liquid recovery and recycling via electrodialysis in biomass processing: An economical assessment

Extravagant price and lack of high-efficiency recovery technology limited scale-up utilization of ionic liquids. Ionic liquids recovery with electrodialysis-based techniques has caught wide concern due to membrane-based characteristic. Economical assessment for electrodialysis-based ionic liquid recovery and recycling in biomass processing was performed by determining influence of equipment-related and financial-related factors with sensitivity analysis for each factor. Overall recovery cost of 1-ethyl-3-methylimidazolium acetate, choline acetate, 1-butyl-3-methylimidazolium hydrogen sulphate and 1-ethyl-3-methylimidazolium hydrogen sulfate varied within 0.75-1.96 $/Kg, 0.99-3.00 $/Kg, 1.37-2.74 $/Kg and 1.15-2.89 $/Kg when factors changed within investigated range. Fold of membrane cost, factor of membrane stack cost, factor of auxiliary equipment cost, factor of annual maintenance cost and annual interest rate of loan were positively related with recovery cost. While percentage of annual elapsed time and loan period were negatively correlated with recovery cost. Economical assessment confirmed economic efficiency of electrodialysis for ionic liquids recovery and recycling in biomass processing.

Deep Eutectic Solvents for Biotechnology Applications

Deep eutectic solvents (DESs) are an alternative to traditional organic solvents and ionic liquids and meet the requirements of "green" chemistry. They are easy to prepare using low-cost constituents, are non-toxic and biodegradable. The review analyzes literature on the use of DES in various fields of biotechnology, provides data on the types of DESs, methods for their preparation, and properties. The main areas of using DESs in biotechnology include extraction of physiologically active substances from natural resources, pretreatment of lignocellulosic biomass to improve enzymatic hydrolysis of cellulose, production of bioplastics, as well as a reaction medium for biocatalytic reactions. The aim of this review is to summarize available information on the use of new solvents for biotechnological purposes.

Critical Assessment of the Sustainability of Deep Eutectic Solvents: A Case Study on Six Choline Chloride-Based Mixtures

An outline of the advantages, in terms of sustainability, of Deep Eutectic Solvents (DESs) is provided, by analyzing some of the most popular DESs, obtained by the combination of choline chloride, as a hydrogen bond acceptor, and six hydrogen bond donors. The analysis is articulated into four main issues related to sustainability, which are recurrently mentioned in the literature, but are often taken for granted without any further critical elaboration, as the prominent green features of DESs: their low toxicity, good biodegradability, renewable sourcing, and low cost. This contribution is intended to provide a more tangible, evidence-based evaluation of the actual green credentials of the considered DESs, to reinforce or question their supposed sustainability, also in mutual comparison with one another.

Controllable recovery and recycling of carboxylic acid-polyalcohol deep eutectic solvent for biomass pretreatment with electronically-controlled chemical methodology

Pretreatment of lignocellulosic biomass using deep eutectic solvent (DES) has been demonstrated environmental and valid. Co-existing of donor and acceptor of hydrogen bond makes DES composition more complicated than traditional solvents, which limits their further scale-up utilization. Advances in biomass pretreatment using green solvent DES should excogitate efficient methodology for DES recycling. Electronically-controlled chemical methodology was first put forward to resolve recovery and recycling issue of DES lactic acid-ethylene glycol after biomass pretreatment. The methodology worked based on selectively migrating of lactate Lac^- and reserving of ethylene glycol using BP-A-BP bipolar membrane electrodialysis (BMED). Impact of primary factors on DES recovery was carefully studied. Lowest energy consumption for specific DES recovery reached 10.4 kw·h/kg and highest DES recovery rate approached 97.6 %. Cognition acquired from this research indicated a promising and efficient strategy for carboxylic acid-polyalcohol DES recovery with novel electronically-controlled chemical methodology.

A review on potential of green solvents in hydrothermal liquefaction (HTL) of lignin

One of the greatest challenges in biorefinery is to reduce biomass' recalcitrance and enable valorization of lignin into higher value compounds. Likewise, green solvents and hydrothermal liquefaction (HTL) with feasible economic viability, functionality, and environmental sustainability have been widely introduced in extraction and conversion of lignin. This review starts with the underscore of disadvantages and limitations of conventional pretreatment approaches and role of green solvents in lignin extraction. Subsequently, the effect of process parameters along with the reaction mechanisms and kinetics on conversion of lignin through HTL were comprehensively reviewed. The limitations of green solvents in extraction and HTL of lignin from biomass were discussed based on the current advancements of the field and future research scopes were also proposed. More details info on HTL of biomass derived lignin which avoid the energy-intensive drying procedures are crucial for the accelerated development and deployment of the advanced lignin biorefinery.

Microwave-assisted deep eutectic solvents/dimethyl sulfoxide system for efficient valorization of sugar bagasse waste into platform chemicals: A biorefinery approach for circular bioeconomy

The exploitation of lignocellulosic biomass (LB) such as sugar bagasse waste in biorefineries is the most cost-effective and favourable sustainable approach to producing essential platform chemicals, materials, and energy environmentally benignly. Herein, a microwave-mediated deep eutectic solvents (DESs)/dimethyl sulfoxide (DMSO) system for efficiently processing LB waste into platform chemicals was proposed thereof. Under optimized appropriate diverse parameters such as solvent varieties, catalyst dosage, DMSO addition, reaction time and temperature, the proposed catalytic system (i.e., microwave mediated DESs/DMSO system) has demonstrated significant yields of 5-hydroxymethylfurfural (5-HMF), furfural (FF) and levulinic acid (LevA) of 31.29 %, 28.38 % and 35.65 %, respectively. These favourable results were obtained at the reaction temperature of 140 °C for 40 min. The anticipated catalytic system's activation energy (Ea) was found to be 29.11 kJ/mol. Hence, a practical, inexpensive and sustainable process with the potential of high-value platform chemicals, explicitly for a sustainable strategy in a circular bioeconomy was proposed.

High-efficiency recovery and regeneration of choline-polyol deep eutectic solvent for biorefinery via bipolar membrane electrodialysis and ultrafiltration

Deep eutectic solvents (DES) have been widely studied for interesting solvent properties in resources utilization and green conversion of energy. Complex composition of DES and lack of recovery techniques restricts their further scale-up application. Exploring efficient recovery and regeneration methodology of DES in biorefinery could be beneficial for low-carbon circular bioeconomy. Recovery and regeneration of choline-polyol DES (choline chloride-ethylene glycol, ChCl-EG) after biomass pretreatment was studied using bipolar membrane electrodialysis (BMED) with ultrafiltration (UF). UF-BMED treatment worked based on the interception of macromolecular degradation products in pretreatment liquor and regional recovery of Ch⁺, Cl^- with EG. Influence of major parameters on DES recovery performance was studied with emphasis. Maximum recovery ratio of DES reached 97.4% and minimum specific energy consumption of DES recovery approached 6.0 kW·h/kg. Cognition gained from this research revealed an efficient technique for DES recycling after biorefinery.

Deep Eutectic Liquids as Tailorable Extraction Solvents: A Review of Opportunities and Challenges

Deep Eutectic Liquids (DELs) fall among the rapidly evolving discoveries of the 21st century, and these liquids are considered as alternative solvents to toxic and volatile organic liquids. Nevertheless, the emerging trend regarding the use of DELs in every field of physical and biological sciences, a lot of ambiguities and misconceptions exist about their formation, mechanism, and efficiencies observed or projected. A review of available technical data makes it obvious that these liquids have the potential to revolutionize the underdeveloped areas of analytical chemistry particularly the extraction/enrichment of analytes. To ensure the green and sustainable use of DELs, the researchers need to have a thorough understanding of DELs, their classification, chemistry, the nature and strength of molecular entanglements, and their tailorable features. Many researchers have declared these liquids recyclable but more attentive trials are needed to develop an authentic and straightforward DELs recycling methodology. The present review covers sound background knowledge and expert opinions about the technical definition of DELs, their classification, formation, recyclability, and tailorable features for their application as extraction solvent/sorbent in analytical chemistry.

Systematic review on lignin valorization in the agro-food system: From sources to applications

Lignocellulosic biomass is the most abundant renewable resource on earth and currently most of this biomass is considered a low-value waste. Specifically, lignin is an underrated bioresource that is mostly burned for energy production and few value-added products have been created. Since the agro-food industry produces large amounts of wastes that can be potential sources of high-quality lignin, scientific efforts should be directed to this industry. Thus, this review provides a systematic overview of the trends and evolution of research on agro-food system-derived lignin (from 2010 to 2020), including the extraction of lignin from various agro-food sources and emergent applications of lignin in the agro-food chain. Crops with the highest average production/year (n = 26) were selected as potential lignin sources. The extraction process efficiency (yield) and lignin purity were used as indicators of the raw material potential. Overall, it is notable that research interest on agro-food lignin has increased exponentially over the years, both as source (567%) and application (128%). Wheat, sugarcane, and maize are the most studied sources and are the ones that render the highest lignin yields. As for the extraction methods used, alkaline and organosolv methods are the most employed (∼50%). The main reported applications are related to lignin incorporation in polymers (∼55%) and as antioxidant (∼24%). Studies on agro-food system-derived lignin is of most importance since there are numerous possible sources that are yet to be fully valorized and many promising applications that need to be further developed.

Deep eutectic solvents as promising pretreatment agents for sustainable lignocellulosic biorefineries: A review

Increasing reliance on non-renewable fuels has shifted research attention to environmentally friendly and sustainable energy sources.The inherently recalcitrant nature of lignocellulosic biomass (LCB) makes downstream processing of the bioprocess challenging. Deep eutectic solvents (DESs) are popular and inexpensive green liquids found effective for LCB valorisation. DESs have negligible vapor-pressure and are non-flammable, recyclable, cost-economic, and thermochemically stable. This review provides a detailed overview on the DESs types, properties and their role in effective delignification and enzymatic digestibility of polysaccharides for cost-effective conversion of LCB into biofuels and bioproducts. The conglomeration of DESs with assistive pretreatment techniques can augment the process of biomass deconstruction. The current challenges in upscaling the DESs-based pretreatment technology up to commercial scale is summarized, with possible solutions and future directions. These insights would fill the knowledge-gaps to towards development of lignocellulosic biorefineries and to address the global energy crisis and environment issues.

Effect of alkaline and deep eutectic solvents pretreatments on the recovery of lignin with antioxidant activity from grape stalks

Grape stalks are lignocellulosic residues that can be valorized through the extraction of lignin - an underutilized biopolymer with high potential. Two lignin extraction methods, alkaline and deep eutectic solvents (DES), were studied, and experimental designs were carried out to obtain the best extraction conditions. The defined parameters for alkaline extraction allowed the recovery of ~48 % of lignin with low purity that was further improved with an autohydrolysis pretreatment (~79 % purity; ~32 % yield). Optimum parameters of DES method rendered high purity lignin (~90 %) without the need of a pretreatment and with a better yield (50.2 % (±2.3)) than the alkaline method. Both lignin fractions presented high antioxidant activities, being close to the antioxidant capacity of BHT for DPPH scavenging. Structural analysis proved the presence of lignin in both alkaline and DES samples with similar morphology. Overall, DES method was more efficient in the extraction of lignin from grape stalks besides its greener and sustainable nature. This work is uses DES to extract lignin from this biomass while comparing it with a commonly classical method, proving that grape stalks can be used to extract lignin with a sustainable and efficient method rendering a final ingredient with value-added properties.

Aqueous-Natural Deep Eutectic Solvent-Enhanced 5-Hydroxymethylfurfural Production from Glucose, Starch, and Food Wastes

5-Hydroxymethylfurfural (HMF) has been regarded as an essential building block for synthesizing chemicals and biofuels, but the direct conversion of biomass to HMF is still a critical challenge. In this study, a cheap and green aqueous-natural deep eutectic solvent (A-NADES) was used to efficiently produce HMF from various carbohydrates, with a low amount of SnCl₄ as the catalyst. High HMF yields of 64.3, 64.0, 61.3, and 54.5 % were obtained from glucose, starch, rice waste, and bread waste at 130 °C in the A-NADES/MIBK (methyl isobutyl ketone) biphasic system, respectively. Mechanistic study results revealed that the water in A-NADES was the key factor in facilitating the conversion of Sn atom existent forms and promoted the HMF production. The choline chloride in NADES stabilized the HMF product with the cooperation of extraction solvent MIBK and inhibited the side reactions of HMF. This study investigated the multiple interaction functions of A-NADES to feedstocks and proposed a practical application of novel solvents to facilitate biomass and food waste conversion with a green method.

Advances of Ionic Liquids and Deep Eutectic Solvents in Green Processes of Biomass-Derived 5-Hydroxymethylfurfural

5-Hydroxymethylfurfural (HMF) is identified as an important bio-based platform chemical to bridge petroleum-based and biomass-based resources. It can be obtained through dehydration of various carbohydrates as well as converted to value-added fuels and chemicals. As designer solvents, ionic liquids (ILs) and deep eutectic solvents (DESs) have been widely used in catalytic transformation of biomass derivatives to various chemicals. This Review summarizes recent progress in experimental and theoretical studies on dehydration of carbohydrates such as fructose, glucose, sucrose, cellobiose, chitosan, cellulose, inulin, and even raw biomass to generate HMF using ILs and DESs as catalysts/cocatalysts and/or solvents/cosolvents. It also gives an overview of IL and DES-involved catalytic transformation of HMF to downstream products via oxidation, reduction, esterification, decarboxylation, and so forth. Challenges and prospects of ILs and DESs are also proposed for further production of HMF and HMF derivatives from biomass in green and sustainable processes.

An integrated deep eutectic solvent-ionic liquid-metal catalyst system for lignin and 5-hydroxymethylfurfural production from lignocellulosic biomass: Technoeconomic analysis

There is an increasing interest in deep eutectic solvent (DES) and ionic liquid (IL) for lignin and 5-hydroxymethylfurfural (HMF) production from lignocellulosic biomass, but their economic costs raise great concerns. In this study, the effects of DES (ZnCl₂-lactic acid)/IL([EMIM]Cl)/metal catalysts (CuCl₂-CrCl₂) recycling time, acetone/water washing volume, HMF yield, and production capacity on total capital investment, annual operating cost, and net present value (NPV) of the refinery were elucidated. Results showed that annual operating cost was highly associated with DES/IL/metal catalysts recycling time as it determined raw materials cost. The HMF MSP of $16453/MT for the base case (ZnCl₂/lactic acid recycling 5 times, acetone/water washing 5 volumes, CuCl₂-CrCl₂-[EMIM]Cl recycling 10 times, HMF yield of 55%, and production capacity of 100 MT/h) was achieved with an IRR of 10%. Sensitivity analysis identified the unit costs of lactic acid and [EMIM]Cl as the dominant contributors to the HMF MSP.

Structural elucidation and targeted valorization of poplar lignin from the synergistic hydrothermal-deep eutectic solvent pretreatment

Elucidating the structural variations of lignin during the pretreatment is very important for lignin valorization. Herein, poplar wood was pretreated with an integrated process, which was composed of AlCl₃-catalyzed hydrothermal pretreatment (HTP, 130-150 °C, 1.0 h) and mild deep-eutectic solvents (DES, 100 °C, 10 min) delignification for recycling lignin fractions. Confocal Raman Microscopy (CRM) was developed to visually monitor the delignification process during the HTP-DES pretreatment. NMR characterizations (2D-HSQC and ³¹P NMR) and elemental analysis demonstrated that the lignin fractions had undergone the following structural changes, such as dehydration, depolymerization, condensation. Molecular weights (GPC), microstructure (SEM and TEM), and antioxidant activity (DPPH analysis) of the lignins revealed that the DES delignification resulted in homogeneous lignin fragments (1.32 < PDI < 1.58) and facilitated the rapid assemblage of lignin nanoparticles (LNPs) with controllable nanoscale sizes (30-210 nm) and excellent antioxidant activity. These findings will enhance the understanding of structural transformations of the lignin during the integrated process and maximize the lignin valorization in a current biorefinery process.

Efficient fractionation of woody biomass hemicelluloses using cholinium amino acids-based deep eutectic solvents and their aqueous mixtures

Novel and green cholinium amino acids-based deep eutectic solvents (DESs) and their aqueous mixtures were synthesized and employed in deconstructing poplar for hemicellulose fractionation. The effects of water content in DESs on hemicellulose dissociation and structural features were comprehensively investigated, along with the reusability of DESs for treatment. The integration of water into DESs could facilitate hemicellulose fractionation, and the cholinium lysine: urea with 5 wt% water (CL: U-5) demonstrated the best performance with a hemicellulose yield of 59.2%. Further structure analysis revealed that hemicelluloses with various branching degrees and molecular weights were obtained with varying water content of DESs. Furthermore, the CL: U-5 had recyclability and reusability with a 40.5% hemicellulose yield obtained after reused three times. The novel and eco-friendly cholinium amino acids-based DESs treatment provides an effective and sustainable strategy for hemicellulose fractionation from woody biomass.

Efficient fractionation of bamboo residue by autohydrolysis and deep eutectic solvents pretreatment

Bamboo processing residue, which is rich in parenchyma cells, was treated as huge waste in bamboo processing industry, such as reassemble bamboo and bamboo flooring. Herein, autohydrolysis and rapid different deep eutectic solvents (DES) delignification strategy were consecutively performed to remove hemicelluloses and lignin from bamboo processing residue. The xylooligosaccharides (XOS) with high yield (34.35%) was achieved in the autohydrolysis process. Results showed that alkaline DES pretreatment resulted in the highest glucose yield (88.22%) and relatively high delignification rate (83.75%) as well as well-preserved lignin structures. However, the lignin fractions obtained under acidic DES conditions were tending to assemble into lignin nanoparticles (LNPs) and having excellent antioxidant activity as compared to those obtained from alkaline DES system. In brief, the combination of autohydrolysis and rapid DES delignification can achieve orientated fractionation of the components from the industrialized bamboo.

Highly efficient conversion of sunflower stalk-hydrolysate to furfural by sunflower stalk residue-derived carbonaceous solid acid in deep eutectic solvent/organic solvent system

Sunflower stalk was utilized as a source of raw material and catalyst for furfural production, and efficient conversion of xylose-rich hydrolysate into furfural was developed in an aqueous deep eutectic solvent/organic solvent medium by carbonaceous solid acid catalyst SO₄^2-/SnO₂-SSXR. The structural characteristics of SO₄^2-/SnO₂-SSXR was characterized by Brunauer-Emmett-Teller (BET), Scanning Electron Microscopy (SEM), Fourier-transform Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD), Pyridine Adsorption Fourier-transform Infrared (Py-IR) and Raman. Under the optimum catalytic conditions, furfural (110.1 mM) yield reached 82.6% in a ChCl-MAA/toluene medium at 180 °C in 15 min by 3.6 wt% SO₄^2-/SnO₂-SSXR. Additionally, quite importantly, SO₄^2-/SnO₂-SSXR, ChCl-MAA and toluene had good recyclability for furfural production. The potential catalytic path of xylose dehydration into furfural was proposed by co-catalysis with SO₄^2-/SnO₂-SSXR and ChCl-MAA. This study revealed high potential sustainable application of furfural production.

The ability of deep eutectic solvent systems to extract bioactive compounds from apple pomace

The objective of this study was to examine the bioactivity of extracts from apple pomace obtained by non-conventional green extraction methods (DES systems). Bioactivity was antioxidant capacity and ability to stimulate insulin secretion from pancreatic beta-cells. The antioxidant capacity of extracts was examined using the DPPH and the FRAP assay. Impact of the extracts on cell viability and insulin secretion were examined using the BRIN-BD11 cell line. ChCl:EG(1:4) extracts resulted in high antioxidant capacity in the DPPH assay (80.1% inhibition versus 11.3%). Extracts obtained from the classical systems demonstrated an ability to promote insulin secretion significantly higher than the positive control, p < 0.05. ChCl:EG(1:4) extracts stimulated insulin secretion to a lesser extent. Overall, the data provides evidence for the potential of DES systems to extract bioactive compounds from apple pomace that have relevance for metabolic health. Further optimisation of the extraction procedures should be tailored to the desired bioactive properties.

Deep eutectic solvent with bifunctional Brønsted-Lewis acids for highly efficient lignocellulose fractionation

Green and low cost deep eutectic solvents (DESs) are promising to replace the solid acids and ionic liquids in biomass fractionation process. To enhance the lignocellulose pretreatment efficiency, an acidic DES that composed of Brønsted acid (ZnCl₂) as hydrogen bond acceptor and Lewis acid (lactic acid) as hydrogen bond donator was designed. This bifunctional DES was used for the extraction of lignin from poplar sawdust. Under the optimal pretreatment condition, the ZnCl₂-lactic acid DES could recover 95.2 wt% of lignin with a purity of 92.1%. The recovered lignin demonstrated a low polydispersity of 1.67 and small amount of β-aryl-ethers. Moreover, the acidic DES had a good recyclability and reusability. Such performance was attributed to the presence of bifunctional acid sites, which help selectively cleave lignin-carbohydrate complex linkages. The acidity and polarity of Brønsted acid can be modulated by the Lewis acid, thus synergistically promote the lignin extraction and production.

Novel, recyclable Brønsted acidic deep eutectic solvent for mild fractionation of hemicelluloses

Acidic deep eutectic solvents (DESs) are promising media for lignin valorization and cellulose conversion due to their good ability in efficient deconstruction of plant cell wall. However, hemicellulose extraction from lignocellulose using acidic DESs remains a challenge. Herein, novel and green Brønsted acidic DESs (BDESs) were synthesized from natural organic acids and common polyols and successively adopted to deconstruct corncob for mild fractionation of hemicelluloses. Oxalic acid (OA)-based BDESs were preferred for corncob processing due to the high solubility of xylan. The results revealed that the suitable acidity of DESs and mild temperature effectively avoided the over-degradation of hemicelluloses. The chemical composition and structural features of the recovered hemicelluloses were investigated systematically. Moreover, after ethylene glycol (EG)-OA BDES was recycled and reused three times, the extraction still resulted in a satisfactory hemicellulose yield. The novel and eco-friendly processing offers a practical and sustainable route for hemicellulose extraction in acidic condition.

Enhancing enzymatic digestibility of bamboo residues using a three-constituent deep eutectic solvent pretreatment

A three-constituent deep eutectic solvent (3c-DES) pretreatment with choline chloride-oxalic acid-ethylene glycol was applied to examine its effectiveness on bamboo residues. The 3c-DES pretreatment can remove 91.09% xylan and significantly improved the 72 h hydrolysis yield of D. sinicus by 6.3 and 1.7 times as compared with the liquid hot water and two-constituent deep eutectic solvent (2c-DES) pretreatment. The introduction of ethylene glycol (EG) into choline chloride (ChCl)/ oxalic acid (OA) decreased the content of surface lignin and the condensation of lignin, which contributed to the increase of hydrophilic nature and cellulose accessibility in substrates. Moreover, higher glucose (85.72%) and xylose (91.05%) yields of 3c-DES pretreated bamboo were achieved with the addition of Tween 80. The 3c-DES system provides an alternative approach for the development of efficient bamboo pretreatment, and had broad space for bamboo biorefinery in southern China.

High-performance delignification of invasive tree species wood with ionic liquid and deep eutectic solvent for the production of cellulose-based polyelectrolytes

An efficient and eco-friendly process for lignocellulosic biomass fractionation is essential for the production of high value-added bioproducts from biomass. The present work aimed to obtain cellulose-rich materials from the wood of an invasive tree species (Acacia dealbata) using an appropriate choice of ionic liquids (ILs) and deep eutectic solvents (DESs), and of the processing conditions, for the subsequent production of cationic wood-based polyelectrolytes. In the pretreatment step, the 1-butyl-3-methylimidazolium methyl sulfate (IL) + H2O and choline chloride + imidazole (DES) systems demonstrated a remarkable ability to remove lignin from acacia, reaching up to 92.4 and 90.2% of delignification, respectively. However, the DES pretreatment revealed to be more selective for lignin removal with lower cellulose losses (less than 15%) than the IL treatment (up to 30%) and less cellulose depolymerization. The hemicellulose was also removed but in a lesser extent with the DES treatment. Both systems could provide treated materials with a very high cellulose content (≥89%). Afterwards, cationic polyelectrolytes having a considerable content of quaternary ammonium groups (up to 3.6 mmol g-1) were obtained directly from the IL- and DES-pretreated woods. The treated woods, when used as raw materials for cationization reaction, allow to synthesize water-soluble polyelectrolytes with potential to be applied in wastewater treatment, pharmaceutical or cosmetic products.

New benzyltriethylammonium/urea deep eutectic solvent: Quantum calculation and application to hyrdoxylethylcellulose modification

In this paper, a new deep eutectic solvent (DES) has been successfully synthesized that is based on benzyltriethylammonium bromide as a hydrogen bond acceptor (HBA) and urea as a hydrogen bond donor (HBD). However, its usability in modifying cellulose derivatives, especially acylating hydroxyethylcellulose (HEC) was investigated. The chemical modification (acetylation) of HEC was carried out in BTEAB/urea DES system without any additional conventional solvent or catalyst. However, the proposed structure of acetylated HEC (HECA) was confirmed according to the structural spectra analyses FTIR-ATR, ¹H, ¹³C, and APT-NMR. The crystalline behavior of acetylated and unmodified HEC in the DES system has been evaluated using XRD patterns, where the thermal stability was evaluated basing on the TD-TGA thermograms. Hence, SEM images and EDX spectra were recorded to prove the changes that are expected at the morphological level and elemental profile. Yet, the nanometric sheets aspect was observed. The Functional Density Theory (DFT) was investigated as a useful computational tool to understand mechanism and donor-acceptor interactions. The topological parameters (electron density Laplacian, kinetic energy density, potential energy density, and energy density) at the bond critical points (BCP), between TBEAB and urea, are deducted according to Quantum Bader's theory, and Atoms-in-molecules (AIM). The non-covalent interactions and steric effect in the DES system were studied using the reduced density gradient isosurface (RDG). Theoretical and computational calculations revealed that the H-bonds and the electrostatic coexist, as predominant interactions in the BTEAB-based DES resulting chemical structure, and mechanism formation. The physical interactions between the component entities of DES lead to a new equilibrium that is more stable than that of HBA and HBD in their separate states.

Synthesis of Green Deep Eutectic Solvents for Pretreatment Wheat Straw: Enhance the Solubility of Typical Lignocellulose

Deep eutectic solvents (DESs), a novel and environmentally-friendly solvent, have high potential for biomass pretreatment due to its advantages of low cost, low toxicity, strong solubility, excellent selectivity and biocompatibility. Two types of DES (binary and ternary) were synthesized and characterized, and optimized ternary DES was selected to pretreat wheat straw for enhancement of the solubility of lignocellulose. Moreover, enzymatic hydrolysis was tested to verify the performance of pretreatment. In addition, the changes in surface morphology, structure and crystallinity of wheat straw pretreated by DES were analyzed to reveal the pretreatment mechanism. Experimental results indicated that viscosity exhibited little difference in different types of DESs, and a declining trend as the temperature increases in same DES. The ternary DES pretreatment efficiently enhanced the solubility of typical lignocellulose, with the optimal removal rate of lignin at approximately 69.46%. Furthermore, the total sugar concentration of the residue was about 5.1 times more than that of untreated wheat straw after the pretreated samples were hydrolyzed by the cellulase for 24 h, indicating that DES has the unique ability to selectively extract lignin and hemicellulose from wheat straw while retaining cellulose, and thus enhanced the solubility of lignocellulose. The scanning electron microscope (SEM) observation and X-ray diffraction (XRD) determination showed that the surface of wheat straw suffered from serious erosion and the crystallinity index of wheat straw increased after DES5 pretreatment. Therefore, DES cleaves the covalent bond between lignin and cellulose and hemicellulose, and reduces the intractability of lignin resulting in the lignin dissolution. It suggests that DES can be used as a promising and biocompatible pretreatment way for the cost-effective conversion of lignocellulose biomass into biofuels.

Progress on chemical modification of cellulose in “green” solvents

Chemical modification of cellulose in "green" solvents.

Short-time deep eutectic solvents pretreatment enhanced production of fermentable sugars and tailored lignin nanoparticles from abaca

Deep eutectic solvents (DES) pretreatment is a promising approach to decrease "biomass recalcitrance" and boost the cellulose bioconversion as well as lignin valorization. In this study, a short-time DES pretreatment strategy was performed to enhance the production of high-yield fermentable sugars and tailored lignin nanoparticles (LNPs) from abaca. The glucose yield reached 92.4% under the optimal pretreatment condition (110 °C, 30 min), which was dramatically increased in comparison with that (9.5%) of control abaca. Simultaneously, nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) techniques indicated that the removed and regenerated DES lignin fractions displayed depolymerized structures and have relatively low molecular weight with relatively homogeneous morphology and narrow size distribution. Transmission electron microscope (TEM) analysis indicated that these lignin fractions are LNPs and the size of the optimal LNPs fraction is ranged from 30 nm to 50 nm. Moreover, all the DES lignin exhibited excellent antioxidant activities as compared to the commercial antioxidant butylated hydroxytoluene (BHT), which can be used as a promising natural antioxidant in industry. In short, this study demonstrated that the short-time DES pretreatment will improve the enzymatic digestibility and facilitate the controllable production and valorization of LNPs from abaca biomass, which will further promote the economic and overall benefits of biorefinery.

Production of rayon fibres from cellulosic pulps: State of the art and current developments

The increasing demand for cellulosic fibres is continuously driven by the growing earth population and requirements of the textile industry. The annual cotton production of ca. 25 million tons is no longer enough to meet the market demands. This market gap of cellulosic fibres is progressively filled by regenerated cellulosic fibres derived from the dissolving pulp. The conventional industrial process of viscose production is far from being environmentally friendly due to the use of hazardous reagents. Alternatively, new trends in the production of regenerated fibres are related to the direct dissolution of cellulose in appropriate environmentally sound recyclable solvents, allowing high quality rayon fibres. This article reviews the sources of dissolving pulps used for the production of viscose and its quality parameters related to the performance of viscose production. The prospective cellulose regeneration processes, both commercialized and under development, are reviewed regarding current and future developments in the area.

A synergistic hydrothermal-deep eutectic solvent (DES) pretreatment for rapid fractionation and targeted valorization of hemicelluloses and cellulose from poplar wood

A synergistic pretreatment that realizing effective fractionation and targeted valorization can guarantee the implementability to future biorefinery scenario. In the present study, a stepwise approach using hydrothermal and deep eutectic solvents (DES) pretreatment was developed to preferentially dissociate hemicelluloses and further remove lignin from poplar, while retaining a cellulose-rich substrate that can be easily digested via enzymatic saccharification to obtain glucose. Results showed that the hydrothermal filtrate is mainly composed of xylooligosaccharide (XOS), monosaccharides, byproducts, and xylan-type hemicelluloses, which have homogenous structures and uniform molecular weights distribution as well as excellent antioxidant activity. Subsequent DES pretreatment further removed the lignin barriers, leading to a remarkable increase in the saccharification efficiency from 15.72% to 96.33% under optimum conditions for enzymatic hydrolysis. In short, the integrated pretreatment is effective for dissociating and chemical conversion of poplar wood, which was reasonable to promote the frontier of highly available biorefinery.

Alkaline deep eutectic solvents as novel and effective pretreatment media for hemicellulose dissociation and enzymatic hydrolysis enhancement

In recent years, deep eutectic solvents (DESs) are used for enhancing the enzymatic digestibility and lignin fractionation in pretreatment, while hemicellulosic fraction receives scant attention. Herein, we report a novel approach of applying alkaline deep eutectic solvents (ADESs) for dissociating hemicelluloses from woody biomass. Among these ADESs, choline chloride-monoethanolamine (C-M) was the most efficacious medium for deconstructing the recalcitrant structure of poplar and 63.3% of hemicelluloses was obtained at 80 °C. Structure analysis showed that the ADESs-extracted hemicelluloses retained partial of O-acetyl groups. Different ADESs could be used to obtain hemicelluloses with various degrees of branching. Furthermore, the enzymatic digestibility of cellulose was significantly increased by 6.6 times compared to that of the untreated poplar under the optimum conditions (C-M, 140 °C). This work provides a view on the dissociation behavior of hemicelluloses during ADESs pretreatment, which would be beneficial for devising DESs toward effective fractionation and comprehensive utilization of biomass.

Furfural and 5-Hydroxymethylfurfural Production from Sugar Mixture Using Deep Eutectic Solvent/MIBK System

Choline chloride (ChCl) / glycolic acid (GA) deep eutectic solvent (DES) media with high water content but without any additional catalyst are introduced in furfural and 5-hydroxymethylfurfural (HMF) production. The effects of water content, reaction time, and reaction temperature are investigated with two feedstocks: a glucose/xylose mixture and birch sawdust. Based on the results, 10 equivalent quantities of water (32.9 wt.%) were revealed to be beneficial for conversions without rupturing the DES structure. The optimal reaction conditions were 160 °C and 10 minutes for the sugar mixture and 170 °C and 10 minutes for birch sawdust in a microwave reactor. High furfural yields were achieved, namely 62 % from the sugar mixture and 37.5 % from birch sawdust. HMF yields were low, but since the characterization of the solid residue of sawdust, after DES treatment, was revealed to contain only cellulose (49 %) and lignin (52 %), the treatment could be potentially utilized in a biorefinery concept where the main products are obtained from the cellulose fraction. Extraction of products into the organic phase (methyl isobutyl ketone, MIBK) during the reaction enabled the recycling of the DES phase, and yields remained high for three runs of recycling.

Catalytic Stereoselective Conversion of Biomass-Derived 4'-Methoxypropiophenone to Trans-Anethole with a Bifunctional and Recyclable Hf-Based Polymeric Nanocatalyst

Anethole (AN) is widely used as an odor cleaner in daily necessities, and can also be applied in the fields of food additives, drug synthesis, natural preservatives, and polymeric materials' preparation. Considering environmental and economic benefits, the use of biomass raw materials with non-precious metal catalysts to prepare high-value fine chemicals is a very promising route. Here, we developed an acid-base bifunctional polymeric material (PhP-Hf (1:1.5)) composed of hafnium and phenylphosphonate in a molar ratio of 1:1.5 for catalytic conversion of biomass-derived 4'-methoxypropiophenone (4-MOPP) to AN via cascade Meerwein-Pondorf-Verley (MPV) reduction and dehydration reactions in a single pot. Compared with the traditional catalytic systems that use high-pressure hydrogen as a hydrogen donor, alcohol can be used as a safer and more convenient hydrogen source and solvent. Among the tested alcohols, 2-pentanol was found to be the best candidate in terms of pronounced selectivity. A high AN yield of 98.1% at 99.8% 4-MOPP conversion (TOF: 8.5 h^-1) could be achieved over PhP-Hf (1:1.5) at 220 °C for 2 h. Further exploration of the reaction mechanism revealed that the acid and base sites of PhP-Hf (1:1.5) catalyst synergistically promote the MPV reduction step, while the Brønsted acid species significantly contribute to the subsequent dehydration step. In addition, the PhP-Hf polymeric nanocatalyst can be recycled at least five times, showing great potential in the catalytic conversion of biomass.