Synthesis and characterization of biogenic selenium nanoparticles with antimicrobial properties made by Staphylococcus aureus, methicillin-resistant Staphylococcus aureus (MRSA), Escherichia coli, and Pseudomonas aeruginosa

Alhidary I, Dai S, Israr M, Ullah Khan R. Evaluation of biological selenium nanoparticles on growth performance, histopathology of vital organs and genotoxicity in Japanese quails (coturnix coturnix japonica)

Research on the effects of selenium nanoparticles (Se-NPs), particularly in Japanese quails, is lacking, especially regarding the potential for DNA damage. Therefore, this study aimed to investigate the impact of administering 0.2 and 0.4 mg/kg of Se-NPs on the growth performance, DNA integrity, and histopathological alterations of the liver, lung, kidney, and heart in quails. A total of 480 one-day-old Japanese quails were divided into three experimental groups as follows: Group 1 served as the control and received only basic feed, while Group 2 and 3 received 0.2 mg/kg and 0.4 mg/kg of Se-NPs via oral gavage. Our results suggested that, birds fed with Se-NPs at both levels significantly (p < .01) reduced feed intake, however, weight gain was significantly (p < .01) increased in quails supplemented with 0.2 mg/kg. Similarly, feed conversion ratio (FCR) was significantly (p < .01) reduced in group supplemented with 0.2 mg/kg Se-NPs. White blood cells increased significantly (P0.01) in 0.4 mg/kg while haemoglobin and red cell distribution width decreased (p < .01) in the same group. Both treatment regimens resulted in DNA damage and histopathological alterations; however, the adverse effects were more prominent in the group receiving the higher dose of 0.4 mg/kg. These findings indicate that the lower dose of 0.2 mg/kg may have beneficial effects on growth. However, the higher dose of 0.4 mg/kg not only negatively impacts growth but also leads to histopathological alterations in major organs of the body and DNA damage as well.

Polygonum bistorta Linn. as a green source for synthesis of biocompatible selenium nanoparticles with potent antimicrobial and antioxidant properties

Here, we report for the first time, green-synthesized selenium nanoparticles (SeNPs) using pharmacologically potent herb of Polygonum bistorta Linn. for multiple biomedical applications. In the study, a facile and an eco-friendly approach is utilized for synthesis of SeNPs using an aqueous roots extract of P. bistorta Linn. followed by extensive characterization via Fourier transform infrared spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Energy Dispersive X-Ray (EDX) analysis. The XRD and FTIR data determine the phase composition and successful capping of plant extract onto the surface of NPs while SEM and TEM micrographic examination reveals the elliptical and spherical morphology of the particles with a mean size of 69 ± 23 nm. After comprehensive characterization, the NPs are investigated for antifungal, antibacterial, antileishmanial, antioxidant, and biocompatibility properties. The study reveals that Polygonum bistorta Linn. synthesized SeNPs exhibit significant antibacterial and antifungal activities with Staphylococcus aureus and Fusarium oxysporum inducing the highest zone of inhibition of 14 ± 1.0 mm and 20 ± 1.2 mm, respectively at the concentration of 40 mg/mL. The NPs are also found to have antiparasitic potential against promastigote and amastigote forms of Leishmania tropica. Furthermore, the NPs are discovered to have excellent potential in neutralizing harmful free radicals thus exhibiting considerable antioxidant potential. Most importantly, Polygonum bistorta Linn. synthesized SeNPs showed substantial compatibility against blood cells in vitro studies, which signifies the nontoxic nature of the NPs. The study thus concludes that medicinally important Polygonum bistorta Linn. roots can be utilized as an eco-friendly, sustainable, and green source for the synthesis of pharmacologically potent selenium nanoparticles.

In vitro assessment of the effect of magnetic fields on efficacy of biosynthesized selenium nanoparticles by Alborzia kermanshahica

Cyanobacteria represent a rich resource of a wide array of unique bioactive compounds that are proving to be potent sources of anticancer drugs. Selenium nanoparticles (SeNPs) have shown an increasing potential as major therapeutic platforms and led to the production of higher levels of ROS that can present desirable anticancer properties. Chitosan-SeNPs have also presented antitumor properties against hepatic cancer cell lines, especially the Cht-NP (Chitosan-NPs), promoting ROS generation and mitochondria dysfunction. It is proposed that magnetic fields can add new dimensions to nanoparticle applications. Hence, in this study, the biosynthesis of SeNPs using Alborzia kermanshahica and chitosan (CS) as stabilizers has been developed. The SeNPs synthesis was performed at different cyanobacterial cultivation conditions, including control (without magnetic field) and magnetic fields of 30 mT and 60 mT. The SeNPs were characterized by uv-visible spectroscopy, Fourier-transform infrared spectroscopy (FT-IR), Dynamic light scattering (DLS), zeta potential, and TEM. In addition, the antibacterial activity, inhibition of bacterial growth, minimum inhibitory concentration (MIC), and minimum bactericidal concentration (MBC), as well as the antifungal activity and cytotoxicity of SeNPs, were performed. The results of uv-visible spectrometry, DLS, and zeta potential showed that 60 mT had the highest value regarding the adsorption, size, and stabilization in compared to the control. FTIR spectroscopy results showed consistent spectra, but the increased intensity of peaks indicates an increase in bond number after exposure to 30 mT and 60 mT. The results of the antibacterial activity and the inhibition zone diameter of synthesized nanoparticles showed that Staphylococcus aureus was more sensitive to nanoparticles produced under 60 mT. Se-NPs produced by Alborzia kermanshahica cultured under a 60 mT magnetic field exhibit potent antimicrobial and anticancer properties, making them a promising natural agent for use in the pharmaceutical and biomedical industries.

The Prevalence, Epidemiological, and Molecular Characterization of Methicillin-Resistant Staphylococcus aureus (MRSA) in Macau (2017-2022)

Macau, recognized as a global tourism hub and the world's most densely populated region, provides a unique environment conducive to methicillin-resistant Staphylococcus aureus (MRSA) transmission in healthcare and community settings, posing a significant public health concern both locally and globally. The epidemiology and molecular characteristics of MRSA in the distinct city of Macau remain largely unelucidated. This five-year longitudinal study (2017-2022) examined the local prevalence and molecular typing of MRSA in Macau, with future MRSA type distribution predicted through ARIMA modeling. We subsequently analyzed the epidemiological characteristics of MRSA, including specimen source, clinical department, collection year, season, patient age, sex, and the annual number of tourists. Comprehensive antibiotic resistance profiles of the strains were also assessed. Of 504 clinically isolated S. aureus strains, 183 (36.3%) were identified as MRSA by the cefoxitin disk diffusion method and validated through multi-locus sequence typing (MLST). The MRSA detection rate showed an upward trend, increasing from 30.1% in 2017 to 45.7% in 2022. SCCmec type IV was predominant (28.9%), followed by types II (25.4%), III (22.1%), and V (22.1%). The primary sources of MRSA isolates were sputum (39.2%) and secretions (25.6%). Older age emerged as a risk factor for MRSA infection, whereas no significant associations were found with seasonal variations, gender, or the annual number of tourists. Despite displaying universal resistance to cefoxitin, oxacillin, and benzylpenicillin, MRSA isolates in Macau remained fully sensitive to vancomycin, tigecycline, quinupristin, nitrofurantoin, and linezolid. Continuous surveillance and analysis of MRSA distribution in Macau could provide invaluable insights for the effective management of MRSA prevention and control measures within healthcare settings.

Applications of peptide-functionalized or unfunctionalized selenium nanoparticles for the passivation of SARS-CoV-2 variants and the respiratory syncytial virus (RSV)

The SARS-CoV-2 Omicron subvariants BA.4, BA. 5 and XBB are currently causing a COVID resurgence due to their increased spreading and infectivity. These latest subvariants have been shown to be somewhat resistant to the most common vaccines even with the third dose. Moreover, it has been well documented that when patients stop taking some commercial therapies (such as Paxlovid), COVID from these variants may return and may even be more contagious. Herein, we tested unfunctionalized and functionalized selenium (Se) nanoparticles with three novel peptides (NapFFTLUFLTUTEKKKK, NapFFMLUFLMUMEKKKK, and NapFFSAVLQSGFKKKK) previously shown by themselves to passivate the Omicron SARS-CoV-2 BA.4, BA.5 and XBB variants. Se is a natural element in our diet and is well known to boost the immune system, thus, providing a complementary approach to viral infections. NapFFMLUFLMUMEKKKK showed a stronger inhibition ability at 98 % for Omicron BA.4 % and 96 % for Omicron BA.5 after just 15 min in vitro. Two types of Se nanoparticles (those made chemically or biogenically by cells) were tested to passivate the new SARS-CoV-2 XBB variant. Results showed that the combination of any peptide and using either type of Se NP, the Omicron subvariant XBB was inhibited by 100 % after just 15 min in vitro. Interestingly, the use of Se NPs alone outperformed the peptides in terms of XBB passivation. Also, in order to determine a mechanism of action, functionalizing Se nanoparticles with the NapFFSAVLQSGFKKKK peptide showed a high binding ability toward the chemotrypsin-like cysteine protease (SARS CoV-2 3CLpro). Further, as a demonstration of their versatility, these functionalized peptides also passivated the Respiratory Syncytial Virus (RSV). NapFFTLUFLTUTEKKKK and NapFFMLUFLMUMEKKKK showed in silico interactions with the fusion glycoprotein of RSV prompting in vitro RSV pseudo virus testing. Compared to the conventionally precipitated synthetic Se nanoparticles, in vitro results showed that biogenic Se functionalized with the peptides enhanced the inhibition RSV to 100 % after just 15 min of incubation. NapFFTLUFLTUTEKKKK and NapFFMLUFLMUMEKKKK also showed no potential genotoxicity or carcinogenic effects. The peptides showed good gastro-intestinal (GI) tract absorption and bioavailability as predicted using the partition coefficient (QP logPo/w), and high-water solubility as detected by QPlogS. According to these promising results, functionalizing biogenic Se nanoparticles with these novel peptides should be further studied in vivo for the improved diagnosis, prevention, and treatment of SARS-CoV-2, RSV, and other respiratory virus infections.

Triple Cross-linked Dynamic Responsive Hydrogel Loaded with Selenium Nanoparticles for Modulating the Inflammatory Microenvironment via PI3K/Akt/NF-κB and MAPK Signaling Pathways

Modulating the inflammatory microenvironment can inhibit the process of inflammatory diseases (IDs). A tri-cross-linked inflammatory microenvironment-responsive hydrogel with ideal mechanical properties achieves triggerable and sustained drug delivery and regulates the inflammatory microenvironment. Here, this study develops an inflammatory microenvironment-responsive hydrogel (OD-PP@SeNPs) composed of phenylboronic acid grafted polylysine (PP), oxidized dextran (OD), and selenium nanoparticles (SeNPs). The introduction of SeNPs as initiators and nano-fillers into the hydrogel results in extra cross-linking of the polymer network through hydrogen bonding. Based on Schiff base bonds, Phenylboronate ester bonds, and hydrogen bonds, a reactive oxygen species (ROS)/pH dual responsive hydrogel with a triple-network is achieved. The hydrogel has injectable, self-healing, adhesion, outstanding flexibility, suitable swelling capacity, optimal biodegradability, excellent stimuli-responsive active substance release performance, and prominent biocompatibility. Most importantly, the hydrogel with ROS scavenging and pH-regulating ability protects cells from oxidative stress and induces macrophages into M2 polarization to reduce inflammatory cytokines through PI3K/AKT/NF-κB and MAPK pathways, exerting anti-inflammatory effects and reshaping the inflammatory microenvironment, thereby effectively treating typical IDs, including S. aureus infected wound and rheumatoid arthritis in rats. In conclusion, this dynamically responsive injectable hydrogel with a triple-network structure provides an effective strategy to treat IDs, holding great promise in clinical application.

Antimicrobial and anti-viral effects of selenium nanoparticles and selenoprotein based strategies: COVID-19 and beyond

Deficiency of selenium (Se) has been described in a significant number of COVID-19 patients having a higher incidence of mortality, which makes it a pertinent issue to be addressed clinically for effective management of the COVID-19 pandemic. Se nanoparticles (SeNPs) provide a unique option for managing the havoc caused by the COVID-19 pandemic. SeNPs possess promising anti-inflammatory and anti-fibrotic effects by virtue of their nuclear factor kappa-light-chain-stimulator of activated B cells (NFκB), mitogen-activated protein kinase (MAPKs), and transforming growth factor-beta (TGF-β) modulatory activity. In addition, SeNPs possess remarkable immunomodulatory effects, making them a suitable option for supplementation with a much lower risk of toxicity compared to their elemental counterpart. Further, SeNPs have been shown to curtail viral and microbial infections, thus, making it a novel means to halt viral growth. In addition, it can be administered in the form of aerosol spray, direct injection, or infused thin-film transdermal patches to reduce the spread of this highly contagious viral infection. Moreover, a considerable decrease in the expression of selenoprotein along with enhanced expression of IL-6 in COVID-19 suggests a potential association among selenoprotein expression and COVID-19. In this review, we highlight the unique antimicrobial and antiviral properties of SeNPs and the immunomodulatory potential of selenoproteins. We provide the rationale behind their potentially interesting properties and further exploration in the context of microbial and viral infections. Further, the importance of selenoproteins and their role in maintaining a successful immune response along with their association to Se status is summarized.

Biosynthesis of selenium nanoparticles by lactic acid bacteria and areas of their possible applications

Lactic acid bacteria, being generally recognized as safe, are the preferred choice among other microbial producers of selenium nanoparticles. For successful production of SeNPs, it is necessary to take into account the physiological properties of the bacterium used as a biotransformer of inorganic forms of selenium in Se⁰. The antimicrobial and antioxidant activity of SeNPs allows to use them in the form of pure nanoparticles or biomass of lactic acid bacteria enriched with selenium in preparation of food, in agriculture, aquaculture, medicine, veterinary, and manufacturing of packing materials for food products. To attract attention to the promising new directions of lactic acid bacteria applications and to accelerate their implementation, the examples of the use of SeNPs synthesized by lactic acid bacteria in the mentioned above areas of human activity are described.

Nanofabrication of cobalt-tellurium using Allium sativum extract and its protective efficacy against H2O2-induced oxidative damage in HaCaT cells

Allium sativum (A. sativum)is well known for its therapeutic and culinary uses. Because of their high medicinal properties, the clove extract was selected to synthesize cobalt-tellurium nanoparticles. The aim of the study was to evaluate the protective activity of the nanofabricated cobalt-tellurium using A. sativum (Co-Tel-As-NPs) against H₂O₂-induced oxidative damage in HaCaT cells. Synthesized Co-Tel-As-NPs were analyzed using UV-Visible spectroscopy, FT-IR, EDAX, XRD, DLS, and SEM. Various concentrations of Co-Tel-As-NPs were used as a pretreatment on HaCaT cells before H₂O₂ was added. Then, the cell viability and mitochondrial damage were compared between pretreated and untreated control cells using an array of assays (MTT, LDH, DAPI, MMP, and TEM), and the intracellular ROS, NO, and antioxidant enzyme production were examined. In the present research, Co-Tel-As-NPs at different concentrations (0.5, 1.0, 2.0, and 4.0μg/mL) were tested for toxicity using HaCaT cells. Furthermore, the effect of H₂O₂ on the viability of HaCaT cells was evaluated using the MTT assay for Co-Tel-As-NPs. Among those, Co-Tel-As-NPs at 4.0 μg/mL showed notable protection; with the same treatment, cell viability was discovered to be 91% and LDH leakage was also significantly decreased. Additionally, the measurement of mitochondrial membrane potential was significantly decreased by Co-Tel-As-NPs pretreatment against H₂O₂. The recovery of the condensed and fragmented nuclei brought about by the action of Co-Tel-As-NPs was identified using DAPI staining. TEM examination of the HaCaT cells revealed that the Co-Tel-As-NPs had a therapeutic effect against H₂O₂ keratinocyte damage.

Biogenic selenium nanoparticles with antifungal activity against the wood-rotting fungus Oligoporus pelliculosus

Selenium nanoparticles (SeNPs) have antimicrobial and antifungal activity. SeNPs using Se resistant bacteria is a low cost and eco-friendly technology. Fungal contamination of wood during drying is one of the main causes of economic losses in the wood industry. The bacterium Delftia sp. 5 resistance to Se and its ability to produce SeNPs able to inhibit the growth of the wood brown-rotting fungus Oligoporus pelliculosus was analyzed. The strain showed an optimal SeNPs production when selenite concentration was 160 mg L ^-1. The SeNPs were spherical with an average size 192.33 ± 8.6 nm and a zeta potential of -41.4 ± 1.3 nm. The SeNPs produced by Delftia sp. 5 (33.6 ± 0.1 mg L ^-1 Se) inhibited the growth of O. pelliculosus in agar plates and in Nothofagus pumilio (Lenga) wood samples. Delftia sp. 5 SeNPs could be used for embedding lenga wood prior to drying for preventing the growth of the deteriorating fungi O. pelliculosus.

Evaluation of the antimicrobial mechanism of biogenic selenium nanoparticles against Pseudomonas fluorescens

Selenium nanoparticles (SeNPs) can be biosynthesized by most Lactic acid bacteria thereby converting toxic sodium into SeNPs. However, few studies have reported the antimicrobial activity of biogenic SeNPs against Pseudomonas fluorescens which are the main species of psychrotrophic bacteria in raw milk. This study reported the synthesis and characterization of SeNPs from Lactobacillus casei ZK-AS 1.1482, and the antimicrobial mechanism against P. fluorescens ATCC 13525. The synthesized SeNPs were amorphous with sizes ranging from 52 to 103 nm. Fourier transform infrared spectroscopy (FT-IR) spectra showed the presence of proteins, polysaccharides, and lipids on the surface of particles, which evidently stabilized the SeNPs structure and morphology. Energy-dispersive X-ray (EDX) analysis revealed that the nanoparticles contained selenium. In addition, the minimal inhibitory concentration (MIC) of SeNPs against P. fluorescens ATCC 13525 was 0.1 mg ml^-1 and the biofilm inhibition rate was 43.52 ± 0.26%. SeNPs decreased the number of living bacteria observed by confocal laser scanning microscopy (CLSM). Meanwhile, after SeNPs treatment, the intracellular adenosine triphosphate (ATP) concentration and antioxidant enzyme activity decreased, the content of reactive oxygen species (ROS) and the malondialdehyde (MDA) content increased, and lipid peroxidation intensified. Real-time fluorescence quantitative PCR (RT-qPCR) assay showed that the expression of flgA, luxR, lapD, MCP, cheA, c-di-GMP, phoB, and pstC gene were down-regulated after SeNPs treatment. The rfbC and DegT/DnrJ/EryC1/StrS gene were significantly up-regulated, indicating that SeNPs could destroy the integrity of cell membrane and thus play an antimicrobial role. Biogenic SeNPs are expected to be developed as an efficient and novel antimicrobial agent for application in the food industry.

Biogenic Selenium Nanoparticles in Biomedical Sciences: Properties, Current Trends, Novel Opportunities and Emerging Challenges in Theranostic Nanomedicine

Selenium is an important dietary supplement and an essential trace element incorporated into selenoproteins with growth-modulating properties and cytotoxic mechanisms of action. However, different compounds of selenium usually possess a narrow nutritional or therapeutic window with a low degree of absorption and delicate safety margins, depending on the dose and the chemical form in which they are provided to the organism. Hence, selenium nanoparticles (SeNPs) are emerging as a novel therapeutic and diagnostic platform with decreased toxicity and the capacity to enhance the biological properties of Se-based compounds. Consistent with the exciting possibilities offered by nanotechnology in the diagnosis, treatment, and prevention of diseases, SeNPs are useful tools in current biomedical research with exceptional benefits as potential therapeutics, with enhanced bioavailability, improved targeting, and effectiveness against oxidative stress and inflammation-mediated disorders. In view of the need for developing eco-friendly, inexpensive, simple, and high-throughput biomedical agents that can also ally with theranostic purposes and exhibit negligible side effects, biogenic SeNPs are receiving special attention. The present manuscript aims to be a reference in its kind by providing the readership with a thorough and comprehensive review that emphasizes the current, yet expanding, possibilities offered by biogenic SeNPs in the biomedical field and the promise they hold among selenium-derived products to, eventually, elicit future developments. First, the present review recalls the physiological importance of selenium as an oligo-element and introduces the unique biological, physicochemical, optoelectronic, and catalytic properties of Se nanomaterials. Then, it addresses the significance of nanosizing on pharmacological activity (pharmacokinetics and pharmacodynamics) and cellular interactions of SeNPs. Importantly, it discusses in detail the role of biosynthesized SeNPs as innovative theranostic agents for personalized nanomedicine-based therapies. Finally, this review explores the role of biogenic SeNPs in the ongoing context of the SARS-CoV-2 pandemic and presents key prospects in translational nanomedicine.

Synthesis and characterization of Se doped Fe3O4 nanoparticles for catalytic and biological properties

In this study, Se-doped Fe₃O₄ with antibacterial properties was synthesized using by a coprecipitation method. The chemistry and morphology of the Se doped Fe₃O₄ nanocomposite were characterized by energy-dispersive X-ray spectroscopy, field-emission scanning electron microscopy, X-ray diffraction, vibrating sample magnetometry, and Brunauer-Emmett-Teller spectroscopy. The antibacterial activity of the Fe₃O₄/Se nanocomposite was examined against G⁺ (Gram-positive) and G^- (Gram-negative) bacteria, in the order Staphylococcus aureus, Staphylococcus saprophyticus, Pseudomonas aeruginosa, Klebsiella pneumonia, and Escherichia coli, which are the most harmful and dangerous bacteria. Fe₃O₄/Se, as a heterogeneous catalyst, was successfully applied to the synthesis of pyrazolopyridine and its derivatives via a one-pot four-component reaction of ethyl acetoacetate, hydrazine hydrate, ammonium acetate, and various aromatic aldehydes. Fe₃O₄/Se was easily separated from the bacteria-containing solution using a magnet. Its admissible magnetic properties, crystalline structure, antibacterial activity, mild reaction conditions, and green synthesis are specific features that have led to the recommendation of the use of Fe₃O₄/Se in the water treatment field and medical applications. Direct Se doping of Fe₃O₄ was successfully realized without additional complicated procedures.

Treatments of Mycobacterium tuberculosis and Toxoplasma gondii with Selenium Nanoparticles

Toxoplasma gondii and Mycobacterium tuberculosis are pathogens that are harmful to humans. When these diseases interact in humans, the result is typically fatal to the public health. Several investigations on the relationship between M. tuberculosis and T. gondii infections have found that there is a strong correlation between them with each infection having a reciprocal effect on the other. TB may contribute to the reactivation of innate toxoplasmosis or enhance susceptibility to a new infection, and toxoplasma co-infection may worsen the severity of pulmonary tuberculosis. As a consequence, there is an earnest and urgent necessity to generate novel therapeutics that can subdue these challenges. Selenium nanostructures' compelling properties have been shown to be a successful treatment for Mycobacterium TB and Toxoplasma gondii. Despite the fact that selenium (Se) offers many health advantages for people, it also has a narrow therapeutic window; therefore, consuming too much of either inorganic or organic compounds based on selenium can be hazardous. Compared to both inorganic and organic Se, Se nanoparticles (SeNPs) are less hazardous. They are biocompatible and excellent in selectively targeting specific cells. As a consequence, this review conducted a summary of the efficacy of biogenic Se NPs in the treatment of tuberculosis (TB) and toxoplasmosis. Mycobacterium tuberculosis, Toxoplasma gondii, and their co-infection were all briefly described.

Pepper-Mediated Green Synthesis of Selenium and Tellurium Nanoparticles with Antibacterial and Anticancer Potential

The production of nanoparticles for biomedical applications (namely with antimicrobial and anticancer properties) has been significantly hampered using traditional physicochemical approaches, which often produce nanostructures with poor biocompatibility properties requiring post-synthesis functionalization to implement features that such biomedical applications require. As an alternative, green nanotechnology and the synthesis of environmentally friendly nanomaterials have been gaining attention over the last few decades, using living organisms or biomolecules derived from them, as the main raw materials to produce cost-effective, environmentally friendly, and ready-to-be-used nanomaterials. In this article and building upon previous knowledge, we have designed and implemented the synthesis of selenium and tellurium nanoparticles using extracts from fresh jalapeño and habanero peppers. After characterization, in this study, the nanoparticles were tested for both their antimicrobial and anticancer features against isolates of antibiotic-resistant bacterial strains and skin cancer cell lines, respectively. The nanosystems produced nanoparticles via a fast, eco-friendly, and cost-effective method showing different antimicrobial profiles between elements. While selenium nanoparticles lacked an antimicrobial effect at the concentrations tested, those made of tellurium produced a significant antibacterial effect even at the lowest concentration tested. These effects were correlated when the nanoparticles were tested for their cytocompatibility and anticancer properties. While selenium nanoparticles were biocompatible and had a dose-dependent anticancer effect, tellurium-based nanoparticles lacked such biocompatibility while exerting a powerful anti-cancer effect. Further, this study demonstrated a suitable mechanism of action for killing bacteria and cancer cells involving reactive oxygen species (ROS) generation. In summary, this study introduces a new green nanomedicine synthesis approach to create novel selenium and tellurium nanoparticles with attractive properties for numerous biomedical applications.

Metal nanoparticles against multi-drug-resistance bacteria

Antimicrobial-resistant (AMR) bacterial infections remain a significant public health concern. The situation is exacerbated by the rapid development of bacterial resistance to currently available antimicrobials. Metal nanoparticles represent a new perspective in treating AMR due to their unique mechanisms, such as disrupting bacterial cell membrane potential and integrity, biofilm inhibition, reactive oxygen species (ROS) formation, enhancing host immune responses, and inhibiting RNA and protein synthesis by inducing intracellular processes. Metal nanoparticles (MNPs) properties such as size, shape, surface functionalization, surface charges, and co-encapsulated drug delivery capability all play a role in determining their potential against multidrug-resistant bacterial infections. Silver, gold, zinc oxide, selenium, copper, cobalt, and iron oxide nanoparticles have recently been studied extensively against multidrug-resistant bacterial infections. This review aims to provide insight into the size, shape, surface properties, and co-encapsulation of various MNPs in managing multidrug-resistant bacterial infections.

Synthesis of pH-responsive dimethylglycine surface-modified branched lipids for targeted delivery of antibiotics

The rampant antimicrobial resistance crisis calls for efficient and targeted drug delivery of antibiotics at the infectious site. Hence, this study aimed to synthesize a pH-responsive dimethylglycine surface-modified branched lipid (DMGSAD-lipid). The structure of the synthesized lipid was fully confirmed. The lipid polymer hybrid nanoparticles (LPHNPs) were formulated using the solvent evaporation method and characterised. Two LPHNPs (VCM_HS15_LPHNPs and VCM_RH40_LPHNPs) were formulated and characterised for size, polydispersity index (PDI), and zeta potential (ZP). Atomistic molecular dynamics simulations revealed that both the systems self-assembled to form energetically stable aggregates. The ZP of RH40_VCM_LPHNPs changed from 0.55 ± 0.14-9.44 ± 0.33 Vm, whereas for SH15_VCM_LPHNPs, ZP changed from - 1.55 ± 0.184 Vm to 9.83 ± 0.52 Vm at pH 7.4 and 6.0, respectively. The encapsulation efficiencies of VCM were above 40% while the drug release was faster at acidic pH when compared to pH 7.4. The antibacterial activity of LPHNPs against MRSA was eight-fold better in MICs at pH 6.0, compared to 7.4, when compared to bare VCM-treated specimens. The study confirms that pH-responsive LPHNPs have the potential for enhancing the treatment of bacterial infections and other diseases characterised by acidic conditions at the target site.

Selenium-based nanomaterials for biosensing applications

The unique chemical and physical features of nanomaterials make them ideal for developing new and better sensing devices, particularly biosensors. Various types of nanoparticles, including metal, oxide, and semiconductor nanostructures, have been utilized to manufacture biosensors, and each kind of nanoparticle plays a unique role in the sensing system. Nanoparticles provide critical roles such as immobilizing biomolecules, catalyzing electrochemical processes, enhancing electron transport between electrode surfaces and proteins, identifying biomolecules, and even functioning as the reactant for the catalytic reaction. Among all the potential nanosystems to be used in biosensors, selenium nanoparticle (SeNP) features have sparked a growing interest in their use in bridging biological recognition events and signal transduction, as well as in developing biosensing devices with novel applications for identification, quantification, and study of different analytes of biological relevance. The optical, physical, and chemical characteristics of differently shaped SeNPs opened up a world of possibilities for developing biosensors of biomedical interest. The outstanding biocompatibility, conductivity, catalytic characteristics, high surface-to-volume ratio, and high density of SeNPs have enabled their widespread use in developing electrochemical biosensors with superior analytical performance compared to other designs of biosensors. This review summarizes recent and ongoing advances, current challenges, and future research perspectives on real-world applications of Se-based nanobiosensors to detect biologically relevant analytes such as hydrogen peroxide, heavy metals, or glucose. Due to the superior properties and multifunctionality of Se-NPs biosensors, these structures can open up considerable new horizons in the future of healthcare and medicine.

Recent Advances of Silver-Based Coordination Polymers on Antibacterial Applications

With the continuous evolution of bacteria and the constant use of traditional antibiotics, the emergence of drug-resistant bacteria and super viruses has attracted worldwide attention. Antimicrobial therapy has become the most popular and important research field at present. Coordination Polymer (CP) and/or metal-organic framework (MOF) platforms have the advantages of a high biocompatibility, biodegradability, and non-toxicity, have a great antibacterial potential and have been widely used in antibacterial treatment. This paper reviewed the mechanism and antibacterial effect of three typical MOFs (pure Ag-MOFs, hybrid Ag-MOFs, and Ag-containing-polymer @MOFs) in silver-based coordination polymers. At the same time, the existing shortcomings and future views are briefly discussed. The study on the antibacterial efficacy and mechanism of Ag-MOFs can provide a better basis for its clinical application and, meanwhile, open up a novel strategy for the preparation of more advanced Ag-contained materials with antibacterial characteristics.

Green Orange Peel-Mediated Bioinspired Synthesis of Nanoselenium and Its Antibacterial Activity against Methicillin-Resistant Staphylococcus aureus

In this study, green orange peel (GOP) was feasibly evidenced in preparing selenium nanoparticles (SeNPs). Acting as reducing agents, polyphenolic compounds were extracted from GOP at the optimal extraction conditions (at 70 °C for 1.5 h, mass ratio of dried orange peel/distilled water of 5/100). The formation of SeNPs was observed at the wavelength range of 250-300 nm by ultraviolet-visible spectroscopy (UV-vis), and their highest yield could be reached at the following conditions: volume ratio of extract/selenious acid solution (V _Ext/V _Se) of 40/10, synthesis duration of 4 h, selenious acid concentration (C _Se) of 80 mM, and reaction temperature of 120 °C. The highly crystalline structure of SeNPs in the hexagonal phase was characterized by powder X-ray diffraction (XRD) with a lattice parameter of 4.3 Å; meanwhile, their spheres with an average crystal size of 18.3 nm were estimated by high-resolution transmission electron microscope (HR-TEM). The rationale of bioreducing agents extracted from green orange peel for the formation of SeNPs was also recognized by Fourier-transform infrared spectroscopy (FT-IR). The antibacterial investigation of the SeNP sample was assessed against antibiotic-resistant bacteria, typically methicillin-resistant Staphylococcus aureus (MRSA), by executing the zone of inhibition and the minimum inhibitory concentration (MIC) tests. The SeNP sample demonstrated excellent antibacterial activity with an average diameter of inhibition zones of 20.0 ± 0.7 mm and an MIC of 4.94 μg/L. A comparison of the physicochemical properties of SeNPs synthesized from GOP extract by the hydrothermal method with SeNP products from other green reducing agents and other methods as well as its antibacterial activity compared with other nanoparticles and some antibiotics was conducted to highlight the superiority of GOP-mediated green-synthesized SeNPs.

Novel biosynthesis of tellurium nanoparticles and investigation of their activity against common pathogenic bacteria

Objectives

Tellurium has received substantial attention for its remarkable properties. This study performed in vitro and in vivo testing of the antibacterial action of tellurium nanoparticles biosynthesized in actinomycetes against methicillin-resistant Staphylococcus aureus (MRSA), a common blood bacterial pathogen.

Methods

Nine actinomycete isolates were tested for their potential to reduce potassium tellurite (K₂TeO₃) and form tellurium nanoparticles (TeNPs). The most efficient actinomycete isolate in producing Tellerium nanoparticles was identified through molecular protocols. The generated TeNPs were characterized using UV, TEM, EDX, XRD and FTIR. The bacterial species implicated in bloodstream infections were detected at El Hussein Hospital. Bacterial identification and antibiotic susceptibility testing were performed using Vitek 2. An animal infection model was used to test the efficacy of the produced TeNPs against the most commonly isolated methicillin-resistant S. aureus using survival assays, colony counting, cytokine assessment and biochemical testing.

Results

The most efficient actinomycete isolate was identified as Streptomyces graminisoli and given the accession number (OL773539). The mean particle size of the produced TeNPs was 21.4 nm, and rods and rosette forms were observed. Methicillin-resistant S. aureus (MRSA) was the main bacterium (60%) causing blood stream infections, and was followed by Escherichia coli (25%) and Klebsiella pneumoniae (15%). The produced TeNPs were tested against MRSA, the bacterium most frequently isolated from blood, and showed a promising action inhibition zone of 24 ± 0.7 mm and an MIC of 50 μg/ml. An animal infection model indicated the promise of TeNPs alone or in combination with standard drugs to combat MRSA in a rat intravenous infection model.

Conclusion

TeNPs combined with vancomycin have successive impact to combat bacteremia for further verification of results.

Biogenic synthesis of selenium and tellurium nanoparticles by marine bacteria and their biological activity

Selenium (SeNPs) and tellurium nanoparticles (TeNPs) were synthesized by green technology using the three new bacterial marine isolates (strains PL 2476, AF 2469 and G 2451). Isolates were classified as Pseudoalteromonas shioyasakiensis according to 16S rRNA sequence analysis, morphological characteristics, and biochemical reactions. The bioreduction processes of isolates were studied in comparison with the previously described Alteromonas macleodii (strain 2328). All strains exhibited significant tolerance to selenite and tellurite up to 1000 µg/mL. A comparative analysis of the bioreduction processes of the isolates demonstrated that the strains have a high rate of reduction processes. Characterization of biogenic red SeNPs and black TeNPs using scanning electron microscopy (SEM), EDX analysis, Dynamic Light Scattering, and micro-Raman Spectroscopy revealed that all the isolates form stable spherical selenium and tellurium nanoparticles whose size as well as elemental composition depend on the producer strain. Nanoparticles of the smallest size (up to 100 nm) were observed only for strain PL 2476. Biogenic SeNPs and TeNPs were also characterized and tested for their antimicrobial, antifouling and cytotoxic activities. Significant antimicrobial activity was shown for nanoparticles at relatively high concentrations (500 and 1000 µg/mL), with the antimicrobial activity of TeNPs being more significant than SeNPs. In contrast, against cell cultures (breast cancer cells (SkBr3) and human dermal fibroblasts (HDF) SeNPs showed greater toxicity than tellurium nanoparticles. Studies have demonstrated the high antifouling effectiveness of selenium and tellurium nanoparticles when introduced into self-polishing coatings. According to the results obtained, the use of SeNPs and TeNPs as antifouling additives can reduce the concentration of leachable biocides used in coatings, reducing the pressure on the environment.

Microbial Mediated Synthesis of Zinc Oxide Nanoparticles, Characterization and Multifaceted Applications

Nanoparticles have gained considerable importance compared to bulk counterparts due to their unique properties. Due to their high surface to volume ratio and high reactivity, metallic and metal-oxide nanostructures have shown great potential applications. Among them, zinc oxide nanoparticles (ZnONPs) have gained tremendous attention attributed to their unique properties such as low toxicity, biocompatibility, simplicity, easy fabrication, and environmental friendly. Remarkably, ZnONPs exhibit optical, physical, antimicrobial, anticancer, anti-inflammatory and wound healing properties. These nanoparticles have been applied in various fields such as in biomedicine, biosensors, electronics, food, cosmetic industries, textile, agriculture and environment. The synthesis of ZnONPs can be performed by chemical, physical and biological methods. Although the chemical and physical methods suffer from some disadvantages such as the involvement of high temperature and pressure conditions, high cost and not environmentally friendly, the green synthesis of ZnONPs offers a promising substitute to these conventional methods. On that account, the microbial mediated synthesis of ZnONPs is clean, eco-friendly, nontoxic and biocompatible method. This paper reviews the microbial synthesis of ZnONPs, parameters used for the optimization process and their physicochemical properties. The potential applications of ZnONPs in biomedical, agricultural and environmental fields as well as their toxic aspects on human beings and animals have been reviewed.

Antimicrobial potential and osteoblastic cell growth on electrochemically modified titanium surfaces with nanotubes and selenium or silver incorporation

Titanium nanotube surfaces containing silver, zinc, and copper have shown antimicrobial effects without decreasing osteoblastic cell growth. In this in-vitro study we present first results on the biological evaluation of surface modifications by incorporating selenium and silver compounds into titanium-dioxide (TiO₂) nanotubes by electrochemical deposition. TiO₂-nanotubes (TNT) and Phosphate-doped TNT (pTNT) were grown on the surface of Ti6Al4V discs by anodization. Hydroxyapatite (HA), selenium (Se) and silver (Ag) compounds were incorporated by electrochemical deposition. Colony forming units of Staphylococcus epidermidis (DSM 3269) were significantly decreased in SepTNT (0.97 ± 0.18 × 10⁶ CFU/mL), SepTNT-HA (1.2 ± 0.39 × 10⁶ CFU/mL), AgpTNT (1.36 ± 0.42 × 10⁶ CFU/mL) and Ag₂SepTNT (0.999 ± 0.12 × 10⁶ CFU/mL) compared to the non-modified control (2.2 ± 0.21 × 10⁶ CFU/mL). Bacterial adhesion was calculated by measuring the covered area after fluorescence staining. Adhesion was lower in SepTNT (37.93 ± 12%; P = 0.004), pTNT (47.3 ± 6.3%, P = 0.04), AgpTNT (24.9 ± 1.8%; P < 0.001) and Ag₂SepTNT (14.9 ± 4.9%; P < 0.001) compared to the non-modified control (73.7 ± 11%). Biofilm formation and the growth of osteoblastic cells (MG-63) was observed by using Crystal Violet staining. Biofilm formation was reduced in SepTNT (22 ± 3%, P = 0.02) and Ag₂SepTNT discs (23 ± 11%, P = 0.02) compared to the non-modified control (54 ± 8%). In comparison with the non-modified control the modified SepTNT-HA and pTNT surfaces showed a significant higher covered area with osteoblastic MG-63-cells. Scanning electron microscope (SEM) images confirmed findings regarding bacterial and osteoblastic cell growth. These findings show a potential synergistic effect by combining selenium and silver with titanium nanotubes.

Improving selenium accumulation in broilers using Escherichia coli Nissle 1917 with surface-displayed selenite reductase SerV01

Selenium levels have a critical impact on livestock and poultry, and selenium nanoparticles (SeNPs) have shown significant efficiency in supplementation. This study identified a high-efficiency selenite reductase, SerV01, in Staphylococcus aureus LZ-01, which can convert Se₂O₃^2- to SeNPs. Subsequently, SerV01 was introduced into the intestines of the broilers using the surface display-engineered E. coli Nissle 1917 (EcN). The results showed that the engineered bacteria (EcN-IS) significantly increased the selenium content by 0.87 mg kg^-1, 0.52 mg kg^-1, and 6.10 mg L^-1 in the liver, breast muscle, and serum, respectively. With SeNPs + EcN-IS treatment, glutathione peroxidase and thioredoxin reductase levels reached 0.7536 ± 0.03176 U μL^-1 protein and 2.463 ± 0.1685 U μL^-1 protein, respectively. With the modified probiotics, the proportion of beneficial intestinal flora increased, with Lactobacillus and Propionibacterium accounting for 75.85% and 0.19%. This technology provides a novel idea to facilitate the exploitation of selenium in broiler diets and improve antioxidant capability.

Selenium (Se) recovery for technological applications from environmental matrices based on biotic and abiotic mechanisms

Selenium (Se) is an essential element with application in manufacturing from food to medical industries. Water contamination by Se is of concern due to anthropogenic activities. Recently, Se remediation has received increasing attention. Hence, different types of remediation techniques are listed in this work, and their potential for Se recovery is evaluated. Sorption, co-precipitation, coagulation and precipitation are effective for low-cost Se removal. In photocatalytic, zero-valent iron and electrochemical systems, the above mechanisms occur with reduction as an immobilization and detoxification process. In combination with magnetic separation, the above techniques are promising for Se recovery. Biological Se oxyanions reduction has been widely recognized as a cost-effective method for Se remediation, simultaneously generating biosynthetic Se nanoparticles (BioSeNPs). Increasing the extracellular production of BioSeNPs and controlling their morphology will benefit its recovery. However, the mechanism of the microbial production of BioSeNPs is not well understood. Se containing products from both microbial reduction and abiotic methods need to be refined to obtain pure Se. Eco-friendly and cost-effective Se refinery methods need to be developed. Overall, this review offers insight into the necessity of shifting attention from Se remediation to Se recovery.

Composition-Dependent Cytotoxic and Antibacterial Activity of Biopolymer-Capped Ag/Au Bimetallic Nanoparticles against Melanoma and Multidrug-Resistant Pathogens

Nanostructured silver (Ag) and gold (Au) are widely known to be potent biocidal and cytotoxic agents as well as biocompatible nanomaterials. It has been recently reported that combining both metals in a specific chemical composition causes a significant enhancement in their antibacterial activity against antibiotic-resistant bacterial strains, as well as in their anticancer effects, while preserving cytocompatibility properties. In this work, Ag/Au bimetallic nanoparticles over a complete atomic chemical composition range were prepared at 10 at% through a green, highly reproducible, and simple approach using starch as a unique reducing and capping agent. The noble metal nanosystems were thoroughly characterized by different analytical techniques, including UV-visible and FT-IR spectroscopies, XRD, TEM/EDS, XPS and ICP-MS. Moreover, absorption spectra simulations for representative colloidal Ag/Au-NP samples were conducted using FDTD modelling. The antibacterial properties of the bimetallic nanoparticles were determined against multidrug-resistant Escherichia coli and methicillin-resistant Staphylococcus aureus, showing a clear dose-dependent inhibition even at the lowest concentration tested (5 µg/mL). Cytocompatibility assays showed a medium range of toxicity at low and intermediate concentrations (5 and 10 µg/mL), while triggering an anticancer behavior, even at the lowest concentration tested, in a process involving reactive oxygen species production per the nanoparticle Au:Ag ratio. In this manner, this study provides promising evidence that the presently fabricated Ag/Au-NPs should be further studied for a wide range of antibacterial and anticancer applications.

Biosynthesis of Nano-Selenium and Its Impact on Germination of Wheat under Salt Stress for Sustainable Production

Selenium and its derivatives have been found capable of excellent biological responses. However, the element in its bulk form has low bioavailability and increased toxicity, meaning the production of effective forms with sustainable methods has become urgent. Several microorganisms, including fungi, bacteria and yeast, as well as higher plants, are capable of biosynthesizing nanoparticles such as nano-selenium (nano-Se), which has wide applications in medicine, agriculture and industry. Thus, the biosynthesis of nano-Se using some bacterial species was the main target of this study. The production of nano-Se and the monitoring of its impact on the wheat germination of seeds under salt stress (i.e., 50, 100, and 150 mM NaCl) was also evaluated in the current study. The ameliorative role of nano-Se doses (i.e., 50, 75, and 100 mg L−1) in the germination of wheat seeds under salt stress was also investigated. Based on sodium selenite tolerance and reducing selenite to elemental Se-NPs, the most effective isolate (TAH) was selected for identification using the 16S rRNA gene sequence, which belonged to Bacillus cereus TAH. The final germination percent, mean germination time, vigor index and germination rate index were improved by 25, 25, 39.4 and 11%, respectively, under 15 mM sodium chloride concentration when 100 mg L−1 nano-selenium was used. On the other hand, the results obtained from a gnotobiotic sand system reveal that with treatment with 100 mg L−1 nano-selenium under high Ec values of 14 ds m−1, the vegetative growth parameters of shoot length, root length, fresh weight and dry weight were improved by 22.8, 24.9, 19.2 and 20%, respectively, over untreated controls. The data obtained from this study reveal that the use of nano-selenium produced by Bacillus cereus offers improved wheat seed germination under a salt-affected environment.

Inhibition of Quorum Sensing and Virulence Factors of Pseudomonas aeruginosa by Biologically Synthesized Gold and Selenium Nanoparticles

The development of microbial resistance requires a novel approach to control microbial infection. This study implies the microbial synthesis of nanometals and assessment of their antivirulent activity against Pseudomonas aeruginosa. Streptomyces isolate S91 was isolated from soil with substantial ability for growth at high salts concentrations. The cell-free supernatant of S91was utilized for the synthesis of Au-NPs and Se-NPs. The 16S rRNA sequence analysis of Streptomyces S91 revealed that S91 had a high similarity (98.82%) to Streptomyces olivaceous. The biosynthesized Au-NPs and Se-NPs were characterized using a UV-Vis spectrophotometer, dynamic light scattering, transmission electron microscopy, energy dispersive X-ray diffraction and Fourier-transform infrared spectroscopy. The quorum sensing inhibitory (QSI) potential of Au-NPs and Se-NPs and the antivirulence activity was examined against P. aeruginosa. The QSI potential was confirmed using RT-PCR. The synthesized Au-NPs and Se-NPs were monodispersed spherical shapes with particle size of 12.2 and 67.98 nm, respectively. Au-NPs and Se-NPs eliminated QS in P. aeruginosa at a concentration range of 2.3-18.5 µg/mL for Au-NPs and 2.3-592 µg/mL for Se-NPs. In addition, Au-NPs and Se-NPs significantly inhibited QS-related virulence factors, such as pyocyanin, protease and, elastase in P. aeruginosa. At the molecular level, Au-NPs and Se-NPs significantly suppressed the relative expression of QS genes and toxins. Hence, the biosynthesized Au-NPS and Se-NPS could be substantial inhibitors of QS and virulence traits of P. aeruginosa.

Enhanced lipid accumulation in microalgae through nanoparticle-mediated approach, for biodiesel production: A mini-review

Nanoparticle application in microalgae for enhanced lipid production is an ongoing work that leads towards the contribution in biodiesel production. During this decade, metal nanoparticles are constantly being reported to have numerous applications in diverse fields, because of their unique optical, electrical, and magnetic properties. They can interact with the biomolecules of cells and thereby alters cellular metabolisms, which in turn reflects their ability to regulate some primary or secondary metabolic pathways. Nanoparticles derived from metals like Fe, Cu, and Se are taking part in redox processes and their presence in many enzymes may modulate algal metabolisms. Besides by upregulating or downregulating the expression of several genes, nanoparticle exposure can alter gene expressions in many organisms. In microalgae such as Chlorella vulgaris, C. pyrenoidosa, Scenedesmus obliquus, S. rubescens, Trachydiscus minut u s, Parachlorella kessleri, and Tetraselmis suecica; metal nanoparticle exposure in different environmental conditions have impacts on various physiological or molecular changes, thereby increasing the growth rate, biomass and lipid production. The present mini-review gives an insight into the various advantages and a future outlook on the application of nanoparticles in microalgae for biofuel production. Also, it can be proposed that nanoparticles could be useful in blocking or deactivating the AGPase enzyme (involved in the glucose to starch conversion pathway), binding to its active site, thereby increasing lipid production in microalgae that could be utilized for enhanced biodiesel production.

Selenite bioreduction and biosynthesis of selenium nanoparticles by Bacillus paramycoides SP3 isolated from coal mine overburden leachate

A native strain of Bacillus paramycoides isolated from the leachate of coal mine overburden rocks was investigated for its potential to produce selenium nanoparticles (SeNPs) by biogenic reduction of selenite, one of the most toxic forms of selenium. 16S rDNA sequencing was used to identify the bacterial strain (SP3). The SeNPs were characterized using spectroscopic (UV-Vis absorbance, dynamic light scattering, X-ray diffraction, and Raman), surface charge measurement (zeta potential), and ultramicroscopic (FESEM, EDX, FETEM) analyses. SP3 exhibited extremely high selenite tolerance (1000 mM) and reduced 10 mM selenite under 72 h to produce spherical monodisperse SeNPs with an average size of 149.1 ± 29 nm. FTIR analyses indicated exopolysaccharides coating the surface of SeNPs, which imparted a charge of -29.9 mV (zeta potential). The XRD and Raman spectra revealed the SeNPs to be amorphous. Furthermore, biochemical assays and microscopic studies suggest that selenite was reduced by membrane reductases. This study reports, for the first time, the reduction of selenite and biosynthesis of SeNPs by B. paramycoides, a recently discovered bacterium. The results suggest that B. paramycoides SP3 could be exploited for eco-friendly removal of selenite from contaminated sites with the concomitant biosynthesis of SeNPs.

Platelet membrane-camouflaged silver metal-organic framework drug system against infections caused by methicillin-resistant Staphylococcus aureus

Background

Due to the intelligent survival strategy and self-preservation of methicillin-resistant Staphylococcus aureus (MRSA), many antibiotics are ineffective in treating MRSA infections. Nano-drug delivery systems have emerged as a new method to overcome this barrier. The aim of this study was to construct a novel nano-drug delivery system for the treatment of MRSA infection, and to evaluate the therapeutic effect and biotoxicity of this system. We prepared a nano silver metal-organic framework using 2-methylimidazole as ligand and silver nitrate as ion provider. Vancomycin (Vanc) was loaded with Ag-MOF, and nano-sized platelet vesicles were prepared to encapsulate Ag-MOF-Vanc, thus forming the novel platelet membrane-camouflaged nanoparticles PLT@Ag-MOF-Vanc.

Results

The synthesized Ag-MOF particles had uniform size and shape of radiating corona. The mean nanoparticle size and zeta potential of PLT@Ag-MOF-Vanc were 148 nm and − 25.6 mV, respectively. The encapsulation efficiency (EE) and loading efficiency (LE) of vancomycin were 81.0 and 64.7 %, respectively. PLT@Ag-MOF-Vanc was shown to be a pH-responsive nano-drug delivery system with good biocompatibility. Ag-MOF had a good inhibitory effect on the growth of three common clinical strains (Escherichia coli, Pseudomonas aeruginosa, and S. aureus). PLT@Ag-MOF-Vanc showed better antibacterial activity against common clinical strains in vitro than free vancomycin. PLT@Ag-MOF-Vanc killed MRSA through multiple approaches, including interfering with the metabolism of bacteria, catalyzing reactive oxygen species production, destroying the integrity of cell membrane, and inhibiting biofilm formation. Due to the encapsulation of the platelet membrane, PLT@Ag-MOF-Vanc can bind to the surface of the MRSA bacteria and the sites of MRSA infection. PLT@Ag-MOF-Vanc had a good anti-infective effect in mouse MRSA pneumonia model, which was significantly superior to free vancomycin, and has no obvious toxicity.

Conclusions

PLT@Ag-MOF-Vanc is a novel effective targeted drug delivery system, which is expected to be used safely in anti-infective therapy of MRSA.

Graphic abstract

The Advancing of Selenium Nanoparticles Against Infectious Diseases

Infectious diseases, caused by the direct exposure of cellular or acellular pathogens, are found to be closely associated with multiple inflammation and immune responses, keeping one of the top threats to human health. As an indispensable trace element, Selenium (Se) plays important roles in antioxidant defence and redox state regulation along with a variety of specific metabolic pathways. In recent decades, with the development of novel nanotechnology, Selenium nanoparticles (Se NPs) emerged as a promising agent for biomedical uses due to their low toxicity, degradability and high bioavailability. Taking the advantages of the strong ability to trigger apoptosis or autophagy by regulating reactive oxygen species (ROS), Se NPs have been widely used for direct anticancer treatments and pathogen killing/clearance in host cells. With excellent stability and drug encapsulation capacity, Se NPs are now serving as a kind of powerful nano-carriers for anti-cancer, anti-inflammation and anti-infection treatments. Notably, Se NPs are also found to play critical roles in immunity regulations, such as macrophage and T effector cell activation, which thus provides new possibilities to achieve novel nano-immune synergetic strategy for anti-cancer and anti-infection therapies. In this review, we summarized the progress of preparation methods for Se NPs, followed by the advances of their biological functions and mechanisms for biomedical uses, especially in the field of anti-infection treatments. Moreover, we further provide some prospects of Se NPs in anti-infectious diseases, which would be helpful for facilitating their future research progress for anti-infection therapy.

Antimicrobial Activity of Se-Nanoparticles from Bacterial Biotransformation

Selenium nanoparticles (SeNPs) are gaining importance in the food and medical fields due to their antibacterial properties. The microbial inhibition of these kinds of particles has been tested in a wide range of Gram (+) and Gram (−) pathogenic bacteria. When SeNPs are synthesized by biological methods, they are called biogenic SeNPs, which have a negative charge caused by their interaction between surface and capping layer (bioorganic material), producing their high stability. This review is focused on SeNPs synthesis by bacteria and summarizes the main factors that influence their main characteristics: shape, size and surface charge, considering the bacteria growth conditions for their synthesis. The different mechanisms of antimicrobial activity are revised, and this review describes several biosynthesis hypotheses that have been proposed due to the fact that the biological mechanism of SeNP synthesis is not fully known.

Selenium Nanomaterials to Combat Antimicrobial Resistance

The rise of antimicrobial resistance to antibiotics (AMR) as a healthcare crisis has led to a tremendous social and economic impact, whose damage poses a significant threat to future generations. Current treatments either are less effective or result in further acquired resistance. At the same time, several new antimicrobial discovery approaches are expensive, slow, and relatively poorly equipped for translation into the clinical world. Therefore, the use of nanomaterials is presented as a suitable solution. In particular, this review discusses selenium nanoparticles (SeNPs) as one of the most promising therapeutic agents based in the nanoscale to treat infections effectively. This work summarizes the latest advances in the synthesis of SeNPs and their progress as antimicrobial agents using traditional and biogenic approaches. While physiochemical methods produce consistent nanostructures, along with shortened processing procedures and potential for functionalization of designs, green or biogenic synthesis represents a quick, inexpensive, efficient, and eco-friendly approach with more promise for tunability and versatility. In the end, the clinical translation of SeNPs faces various obstacles, including uncertain in vivo safety profiles and mechanisms of action and unclear regulatory frameworks. Nonetheless, the promise possessed by these metalloid nanostructures, along with other nanoparticles in treating bacterial infections and slowing down the AMR crisis, are worth exploring.

Application of Response Surface Methodology for Optimizing the Therapeutic Activity of ZnO Nanoparticles Biosynthesized from Aspergillus niger

In this study, the biosynthesis of zinc oxide nanoparticles using Aspergillus niger (A/ZnO-NPs) is described. These particles have been characterized by UV-Vis spectrum analysis, X-ray powder diffraction, field emission scanning electron microscopy, and transmission electron microscopy. To use this biosynthesized nanoparticle as an antiproliferative and antimicrobial agent, the IC₅₀ value against the breast cancer cell line and inhibition zone against Escherichia coli were used to optimize the effect of two processing factors including dose of filtrate fungi cell and temperature. The biosynthesized A/ZnO-NPs had an absorbance band at 320 nm and spherical shapes. The mean particles size was 35 nm. RSM (response surface methodology) was utilized to investigate the outcome responses. The Model F-value of 12.21 and 7.29 implies that the model was significant for both responses. The contour plot against inhibition zone for temperature and dose showed that if the dose increases from 3.8 to 17.2 µg/mL, the inhibition zone increases up to 35 mm. As an alternative to chemical and/or physical methods, biosynthesizing zinc oxide NPs through fungi extracts can serve as a more facile and eco-friendly strategy. Additionally, for optimization of the processes, the outcome responses in the biomedical available test can be used in the synthesis of ZnO-NPs that are utilized for large-scale production in various medical applications.

Food for Special Medical Purposes and Nutraceuticals for Pain: A Narrative Review

Introduction

The present paper focuses on the possible contribution of food compounds to alleviate symptomatic pains. Chronic pain can more easily be linked to anticipatory signals such as thirst and hunger than it is to sensory perceptions as its chronicity makes it fall under the behavioural category rather than it does senses. In fact, pain often negatively affects one’s normal feeding behavioural patterns, both directly and indirectly, as it is associated with pain or because of its prostrating effects.

Nutritional Compounds for Pain

Several nutraceuticals and Foods for Special Medical Purposes (FSMPs) are reported to have significant pain relief efficacy with multiple antioxidant and anti-inflammatory properties. Apart from the aforementioned properties, amino acids, fatty acids, trace elements and vitamins may have a role in the modulation of pain signals to and within the nervous system.

Conclusion

In our opinion, this review could be of great interest to clinicians, as it offers a complementary perspective in the management of pain. Trials with well-defined patient and symptoms selection and a robust pharmacological design are pivotal points to let these promising compounds become better accepted by the medical community.

Green Synthesis of Selenium and Tellurium Nanoparticles: Current Trends, Biological Properties and Biomedical Applications

The synthesis and assembly of nanoparticles using green technology has been an excellent option in nanotechnology because they are easy to implement, cost-efficient, eco-friendly, risk-free, and amenable to scaling up. They also do not require sophisticated equipment nor well-trained professionals. Bionanotechnology involves various biological systems as suitable nanofactories, including biomolecules, bacteria, fungi, yeasts, and plants. Biologically inspired nanomaterial fabrication approaches have shown great potential to interconnect microbial or plant extract biotechnology and nanotechnology. The present article extensively reviews the eco-friendly production of metalloid nanoparticles, namely made of selenium (SeNPs) and tellurium (TeNPs), using various microorganisms, such as bacteria and fungi, and plants' extracts. It also discusses the methodologies followed by materials scientists and highlights the impact of the experimental sets on the outcomes and shed light on the underlying mechanisms. Moreover, it features the unique properties displayed by these biogenic nanoparticles for a large range of emerging applications in medicine, agriculture, bioengineering, and bioremediation.

A Review on the Synthesis and Functionalization of Gold Nanoparticles as a Drug Delivery Vehicle

Metal nanoparticles are being extensively used in biomedical fields due to their small size-to-volume ratio and extensive thermal stability. Gold nanoparticles (AuNPs) are an obvious choice for biomedical applications due to their amenability of synthesis, stabilization, and functionalization, low toxicity, and ease of detection. In the past few decades, various chemical methods have been used for the synthesis of AuNPs, but recently, newer environment friendly green approaches for the synthesis of AuNPs have gained attention. AuNPs can be conjugated with a number of functionalizing moieties including ligands, therapeutic agents, DNA, amino acids, proteins, peptides, and oligonucleotides. Recently, studies have shown that gold nanoparticles not only infiltrate the blood vessels to reach the site of tumor but also enter inside the organelles, suggesting that they can be employed as effective drug carriers. Moreover, after reaching their target site, gold nanoparticles can release their payload upon an external or internal stimulus. This review focuses on recent advances in various methods of synthesis of AuNPs. In addition, strategies of functionalization and mechanisms of application of AuNPs in drug and bio-macromolecule delivery and release of payloads at target site are comprehensively discussed.

Role of nano-selenium in health and environment

In recent years, researches on selenium nanoparticle have gained more attention due to its important role in many physiological processes. Generally, selenium nanoparticle has a high level of absorption in regular supplementation comparative to selenium. Therefore it is all-important to develop new techniques to elevate the transportation of selenium compounds (selenoproteins, selenoenzymes, etc.) by increasing their bioavailability, bioactivity, and controlled release. SeNPs have special attention regarding their application as food additives and therapeutic agents. Selenium nanoparticle has biomedical and pharmaceutical uses due to its antioxidant, antimicrobial, antidiabetic, and anticancer effects. Selenium nanoparticle is also used to antagonize the toxic effect of chemical and heavy metals. SeNPs are beneficial for the treatment of water and soil contaminated with metals and heavy metals as it has adsorption capability. Selenium nanoparticle is synthesized by the bioreduction of selenium species (sodium selenate, sodium selenite, selenium dioxide, and selenium tetrachloride, etc.) by using bacteria, fungi, plant, and plant extracts, which have given hope for the bioremediation of selenium contaminated water and soils. This article reviews the procedure of selenium nanoparticle synthesis (physical, chemical and biological methods), characterization (UV-vis spectroscopy, transmission electron microscopy, Scanning electron microscopy, electron dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform-infrared spectroscopy, etc.), with the emphasis on its role and application in health and environment.

Biologically active PET/polysaccharide-based nanofibers post-treated with selenium/Tragacanth Gum nanobiocomposites

Polysaccharide-based nanofibers from Tragacanth Gum (TG) and polyethylene terephthalate (PET) were post-treated with selenium nanoparticles (Se NPs) and also stabilized with TG (SeNPs/TG). DLS, FE-SEM, EDX, TEM, and XRD were employed to verify the synthesis of Se NPs. The relatively narrow size distribution of SeNPs/TG showed through TEM and DLS investigations comparing with Se NPs. The Se NPs formation with and without TG was studied with FTIR confirmed the final stabilized solution due to the bonded hydroxyl groups of TG with Se NPs. Also, a relatively higher antioxidant reported on SeNPs/TG at 0.5-5 mg/mL using DPPH scavenging ability. The Se NPs and SeNPs/TG solutions specified remarkable inhibition against Staphylococcus aureus and Candida albicans; however, no significant antibacterial activities observed on the treated nanofibers. Finally, the uniform migration of fibroblast cells in wound healing of the treated nanofibers with SeNPs/TG proved the value of the products in medical applications.

Fungal Bioremediation of Selenium-Contaminated Industrial and Municipal Wastewaters

Selenium (Se) is an essential element for most organisms yet can cause severe negative biological consequences at elevated levels. The oxidized forms of Se, selenate [Se(VI)] and selenite [Se(IV)], are more mobile, toxic, and bioavailable than the reduced forms of Se such as volatile or solid phases. Thus, selenate and selenite pose a greater threat to ecosystems and human health. As current Se remediation technologies have varying efficiencies and costs, novel strategies to remove elevated Se levels from environments impacted by anthropogenic activities are desirable. Some common soil fungi quickly remove Se (IV and VI) from solution by aerobic reduction to solid or volatile forms. Here, we perform bench-scale culture experiments of two Se-reducing Ascomycota to determine their Se removal capacity in growth media conditions containing either Se(IV) or Se(VI) as well as in Se-containing municipal (∼25 μg/L Se) and industrial (∼2000 μg/L Se) wastewaters. Dissolved Se was measured throughout the experiments to assess Se concentration and removal rates. Additionally, solid-associated Se was quantified at the end of each experiment to determine the amount of Se removed to solid phases (e.g., Se(0) nanoparticles, biomass-adsorbed Se, or internal organic selenoproteins). Results show that under optimal conditions, fungi more efficiently remove Se(IV) from solution compared to Se(VI). Additionally, both fungi remove a higher percentage of Se from the filtered municipal wastewater compared to the industrial wastewater, though cultures in industrial wastewater retained a greater amount of solid-associated Se. Additional wastewater experiments were conducted with supplemental carbohydrate- or glycerin-based carbon products and additional nitrogen- and phosphorous-containing nutrients in some cases to enhance fungal growth. Relative to unamended wastewater experiments, supplemental carbohydrates promote Se removal from municipal wastewater but minimally impact industrial wastewater removal. This demonstrates that carbon availability and source impacts fungal Se reduction and removal from solution. Calculations to assess the leaching potential of solid-associated Se from fungal biomass show that wastewater Se release will not exceed regulatory limits. This study highlights the considerable potential for the mycoremediation of Se-contaminated wastewaters.