Nanoparticulate biopolymers deliver insulin orally eliciting pharmacological response

Colostrum insulin supplementation to neonatal Holstein bulls affects small intestinal histomorphology, mRNA expression, and enzymatic activity with minor influences on peripheral metabolism

The objectives of this study were to evaluate how varying colostral insulin concentrations influenced small intestinal development and peripheral metabolism in neonatal Holstein bulls. Insulin was supplemented to approximately 5× (70.0 μg/L; n = 16) or 10× (149.7 μg/L; n = 16) the basal colostrum insulin (12.9 μg/L; BI, n = 16) concentration to maintain equivalent macronutrient intake (crude fat: 4.1 ± 0.06%; crude protein: 11.7 ± 0.05%; and lactose: 1.9 ± 0.01%) among treatments. Colostrum was fed at 2, 14, and 26 h postnatal and blood metabolites and insulin concentration were measured at 0, 30, 60, 90, 120, 180, 240, 360, 480, and 600 min postprandial respective to the first and second colostrum meal. At 30 h postnatal, a subset of calves (n = 8/treatment) were killed to excise the gastrointestinal and visceral tissues. Gastrointestinal and visceral gross morphology and dry matter and small intestinal histomorphology, gene expression, and carbohydrase activity were assessed. Insulin supplementation tended to linearly reduce the glucose clearance rate following the first meal, whereas after the second meal, supplementation linearly increased the rate of glucose absorption and nonesterified fatty acid clearance rate, decreased the time to maximum glucose concentrations, and decreased the time to reach minimum nonesterified fatty acid concentrations. Additionally, insulin clearance rate was linearly increased by insulin supplementation following the second colostrum feeding. However, there were no overall differences between treatments in the concentrations of glucose, nonesterified fatty acids, or insulin in plasma or serum. With respect to macroscopic intestinal development, dry rumen tissue mass linearly decreased when insulin was supplemented in colostrum, and supplementation linearly increased duodenal dry tissue density (g dry matter/cm) while tending to increase duodenal dry tissue weight. Increasing the colostrum insulin concentration improved small intestinal histomorphological development in the distal small intestine, as ileal villi height and mucosal-serosal surface area index were increased by supplementing insulin. Lactase enzymatic activity linearly increased in the proximal jejunum while ileal isomaltase activity linearly decreased with insulin supplementation. These data indicate that changes in colostrum insulin concentrations rapidly affect gastrointestinal growth prioritization and carbohydrase activity. The changes in gastrointestinal ontology result in minor changes in postprandial metabolite availability and clearance.

Oral insulin delivery: Barriers, strategies, and formulation approaches: A comprehensive review

Diabetes Mellitus is characterized by a hyperglycemic condition which can either be caused by the destruction of the beta cells or by the resistance developed against insulin in the cells. Insulin is a peptide hormone that regulates the metabolism of carbohydrates, proteins, and fats. Type 1 Diabetes Mellitus needs the use of Insulin for efficient management. However invasive methods of administration may lead to reduced adherence by the patients. Hence there is a need for a non-invasive method of administration. Oral Insulin has several merits over the conventional method including patient compliance, and reduced cost, and it also mimics endogenous insulin and hence reaches the liver by the portal vein at a higher concentration and thereby showing improved efficiency. However oral Insulin must pass through several barriers in the gastrointestinal tract. Some strategies that could be utilized to bypass these barriers include the use of permeation enhancers, absorption enhancers, use of suitable polymers, use of suitable carriers, and other agents. Several formulation types have been explored for the oral delivery of Insulin like hydrogels, capsules, tablets, and patches which have been described briefly by the article. A lot of attempts have been made for developing oral insulin delivery however none of them have been commercialized due to numerous shortcomings. Currently, there are several formulations from the companies that are still in the clinical phase, the success or failure of some is yet to be seen in the future.

Chitosan/Albumin Coating Factorial Optimization of Alginate/Dextran Sulfate Cores for Oral Delivery of Insulin

The design of nanoparticle formulations composed of biopolymers, that govern the physicochemical properties of orally delivered insulin, relies on improving insulin stability and absorption through the intestinal mucosa while protecting it from harsh conditions in the gastrointestinal (GI) tract. Chitosan/polyethylene glycol (PEG) and albumin coating of alginate/dextran sulfate hydrogel cores are presented as a multilayer complex protecting insulin within the nanoparticle. This study aims to optimize a nanoparticle formulation by assessing the relationship between design parameters and experimental data using response surface methodology through a 3-factor 3-level optimization Box–Behnken design. While the selected independent variables were the concentrations of PEG, chitosan and albumin, the dependent variables were particle size, polydispersity index (PDI), zeta potential, and insulin release. Experimental results showed a nanoparticle size ranging from 313 to 585 nm, with PDI from 0.17 to 0.39 and zeta potential ranging from −29 to −44 mV. Insulin bioactivity was maintained in simulated GI media with over 45% cumulative release after 180 min in a simulated intestinal medium. Based on the experimental responses and according to the criteria of desirability on the experimental region’s constraints, solutions of 0.03% PEG, 0.047% chitosan and 1.20% albumin provide an optimum nanoparticle formulation for insulin oral delivery.

The Effects of Chitosan-PEG Nanoparticles Based on Channa striata Protein Hydrolyzate on Decreasing Diabetes Mellitus in Diabetic Rats

Background

Channa striata has several good nutrients, including 70% protein, 20% albumin, complete amino acids, zinc, selenium, and iron. However, no study has investigated the chitosan-PEG nanoparticles based on Channa striata protein hydrolyzate. This study's purpose was to determine the role of 10% Channa striata protein hydrolyzate, chitosan-PEG 4000 nanoparticles, and chitosan-PEG 6000 nanoparticles in reducing diabetes mellitus in diabetic rats.

Method

A randomized pretest-posttest control group design was used, with male Sprague-Dawley rats being divided into five groups: STZ, acarbose, hydrolyzate, chitosan-PEG 4000 nanoparticles, and chitosan-PEG 6000 nanoparticles. Diabetes was induced by a single injection of streptozotocin at 1 ml in each formulation. Blood glucose levels were analyzed using a glucometer 7, 14, and 21 days after treatment. The CHOD-PAP method was used to analyze the lipid profile. Pancreas and liver histology analyses were carried out using a microscope.

Results

The formulation of 10% Channa striata protein hydrolyzate and PEG 6000 was the most effective in lowering blood glucose concentrations, and the response was close to the acarbose result. The glucose concentration decreased after daily oral administration of chitosan-PEG nanoparticles for 21 days. The plasma cholesterol, triglycerides, LDL, and HDL concentrations were lower in treated than in untreated diabetic rats.

Conclusion

This study concluded that the formulation of 10% Channa striata protein hydrolyzate and chitosan-PEG 6000 nanoparticles was more effective than acarbose.

Engineering Nano- and Microparticles as Oral Delivery Vehicles to Promote Intestinal Lymphatic Drug Transport

Targeted oral delivery of a drug via the intestinal lymphatic system (ILS) has the advantages of protecting against hepatic first-pass metabolism of the drug and improving its pharmacokinetic performance. It is also a promising route for the oral delivery of vaccines and therapeutic agents to induce mucosal immune responses and treat lymphatic diseases, respectively. This article describes the anatomical structures and physiological characteristics of the ILS, with an emphasis on enterocytes and microfold (M) cells, which are the main gateways for the transport of particulate delivery vehicles across the intestinal epithelium into the lymphatics. A comprehensive overview of recent advances in the rational engineering of particulate vehicles, along with the challenges and opportunities that they present for improving ILS drug delivery, is provided, and the mechanisms by which such vehicles target and transport through enterocytes or M cells are discussed. The use of naturally sourced materials, such as yeast microcapsules and their derived polymeric β-glucans, as novel ILS-targeting delivery vehicles is also reviewed. Such use is the focus of an emerging field of research. Their potential use in the oral delivery of nucleic acids, such as mRNA vaccines, is proposed.

Oral insulin delivery: utopia, currently possible or a near reality?

Diabetes is still one of the main diseases worldwide due to its high incidence, prevalence and, unfortunately, very high mortality. Type 1 diabetes (and in some other types) is generally controlled by exogenous insulin. Several attempts of oral insulin administration to humans have been done so far. Some of them achieved interesting results, but it seems to exist a barrier to transpose these studies into clinical trials. A broad perspective about the oral insulin and approaches will be addressed. Representative (not all) examples of innovation are herein described, and they should represent a step forward to achieve the main goal: to orally deliver insulin and improve the life quality of millions of patients.

Highly cross-linked arabinoxylans microspheres as a microbiota-activated carrier for colon-specific insulin delivery

In vivo evaluation of arabinoxylans (AX) microspheres showed to protect insulin from degradation in the upper gastrointestinal tract and carrier insulin to colon. Insulin-loaded AX microspheres (50 UI/kg) decreased blood glucose level by 39% in diabetic rats with a maximum effect at 18 h post-administration, indicating that insulin remains bioactive. The continuous administration (4 days) of insulin-loaded AX microspheres improved the polyuria and increased the production of short-chain fatty acids, as well as Bifidobacterium and Bacteroides in diabetic rats compared to untreated diabetic rats. AX microspheres are a potential microbiota-activated carrier for colon-specific drug delivery and could be useful as a complementary treatment for diabetes.

Polysaccharide nanoparticles for oral controlled drug delivery: the role of drug-polymer and interpolymer interactions

Introduction: The oral route still represents the most popular way of administering drugs; nowadays oral administration faces new challenges, in particular with regards to the delivery of APIs that are poorly absorbed and sensitive to degradation such as macromolecules and biotechnological drugs. Nanoparticles are promising tools for the efficient delivery of these drugs to the gastrointestinal tract. Areas covered:Approaches and techniques for the formulation of drugs, with particular focus on the preparation of polysaccharide nanoparticles obtained by non-covalent interactions. Expert opinion:Polysaccharide-based nanoparticulate systems offer the opportunity to address some of the issues posed by biotechnological drugs, as well as by small molecules, with problems of stability/intestinal absorption, by exploiting the capability of the polymer to establish non-covalent bonds with functional groups in the chemical structure of the API. This area of research will continue to grow, provided that these drug delivery technologies will efficaciously be translated into systems that can be manufactured on a large scale under GMP conditions. Industrial scale-up represents the biggest obstacle to overcome in view of the transformation of very promising results obtained on lab scale into medicinal products. To do that, an effort toward the simplification of the process and technologies is necessary.

How Can Biomolecules Improve Mucoadhesion of Oral Insulin? A Comprehensive Insight using Ex-Vivo, In Silico, and In Vivo Models

Currently, insulin can only be administered through the subcutaneous route. Due to the flaws associated with this route, it is of interest to orally deliver this drug. However, insulin delivered orally has several barriers to overcome as it is degraded by the stomach’s low pH, enzymatic content, and poor absorption in the gastrointestinal tract. Polymers with marine source like chitosan are commonly used in nanotechnology and drug delivery due to their biocompatibility and special features. This work focuses on the preparation and characterization of mucoadhesive insulin-loaded polymeric nanoparticles. Results showed a suitable mean size for oral administration (<600 nm by dynamic laser scattering), spherical shape, encapsulation efficiency (59.8%), and high recovery yield (80.6%). Circular dichroism spectroscopy demonstrated that protein retained its secondary structure after encapsulation. Moreover, the mucoadhesive potential of the nanoparticles was assessed in silico and the results, corroborated with ex-vivo experiments, showed that using chitosan strongly increases mucoadhesion. Besides, in vitro and in vivo safety assessment of the final formulation were performed, showing no toxicity. Lastly, the insulin-loaded nanoparticles were effective in reducing diabetic rats’ glycemia. Overall, the coating of insulin-loaded nanoparticles with chitosan represents a potentially safe and promising approach to protect insulin and enhance peroral delivery.

Nanotechnology in Insulin Delivery for Management of Diabetes

Diabetes is a group of diseases characterized by hyperglycemia and originating from the deficiency or resistance to insulin, or both. Ultimately, the most effective treatment for patients with diabetes involves subcutaneous injections of insulin. However, this route of administration is often painful and inconvenient, as most patients will have to selfadminister it at least twice a day for the rest of their lives. Also, infection, insulin precipitation, and either lipoatrophy or lipohypertrophy are frequently observed at the site of injection. To date, several alternative routes of insulin administration have been explored, including nasal, pulmonary and oral. Although the delivery of insulin is an ideal route for diabetic patients, several limitations have to be overcome such as the rapid degradation of insulin in gastric fluid and low oral bioavailability. Numerous strategies have been carried out to improve these limited parameters such as the use of enzyme inhibitors, absorption enhancers, mucoadhesive polymers and chemical modification for receptor-mediated absorption. Also, insulin-loaded nanocarriers bypass several physiological barriers. This current review focuses on the various barriers existing in the delivery of insulin through the oral route and the strategies undertaken so far to overcome those obstacles using nanocarriers as a potential vehicle of insulin.

Hydrogels For Peptide Hormones Delivery: Therapeutic And Tissue Engineering Applications

Peptides are the most abundant biological compounds in the cells that act as enzymes, hormones, structural element, and antibodies. Mostly, peptides have problems to move across the cells because of their size and poor cellular penetration. Therefore, a carrier that could transfer peptides into cells is ideal and would be effective for disease treatment. Until now, plenty of polymers, e.g., polysaccharides, polypeptides, and lipids were used in drug delivery. Hydrogels made from polysaccharides showed significant development in targeted delivery of peptide hormones because of their natural characteristics such as networks, pore sizes, sustainability, and response to external stimuli. The main aim of the present review was therefore, to gather the important usages of the hydrogels as a carrier in peptide hormone delivery and their application in tissue engineering and regenerative medicine.

Role of Nanotechnology in Diabetic Management

BACKGROUND

Diabetes Mellitus (DM) has emerged as an epidemic that has affected millions of people worldwide in the last few decades. Nanotechnology is a discipline that is concerned with material characteristics at nanoscale and offers novel techniques for disease detection, management and prevention.

OBJECTIVE

Diabetes mellitus is an epidemic disease that has affected millions of people globally. Nanotechnology has greatly enhanced the health status by providing non-obtrusive techniques for the management and treatment of diabetic patients.

METHOD

In diabetes research, the nanotechnology has encouraged the advancement of novel glucose monitoring and several modalities for insulin delivery holding possibilities to enhance the personal satisfaction and life quality for diabetic patients.

RESULT

Nanoparticles hold a great potential in the areas of drug delivery and are explored as vehicles for orally administered insulin formulations. Glucose biosensors equipped with nanoscale materials such as Quantum Dots (QDs), Carbon Nanotubes (CNTs), Magnetic Nanoparticles (MNPs) etc. have shown greater sensitivity. Nanotechnology in diabetic research is heading towards the novel techniques which can provide continuous glucose monitoring offering accurate information and improving patient's compliance.

CONCLUSION

The present review addresses the different aspects of nanoparticles and recent patents related to diabetic management based on nanotechnology.

Albumin conjugates and assemblies as versatile bio-functional additives and carriers for biomedical applications

As the most abundant plasma protein, serum albumin has been extensively studied and employed for therapeutic applications. Despite its direct clinical use for the maintenance of blood homeostasis in various medical conditions, this review exclusively summarizes and discusses albumin-based bio-conjugates and assemblies as versatile bio-functional additives and carriers in biomedical applications. As one of the smallest-sized proteins in the human body, albumin is physiochemically stable and biochemically inert. Moreover, albumin is also endowed with abundant specific binding sites for numerous therapeutic compounds, which also endow it with superior bioactivities. Firstly, due to its small size and binding specificity, albumin alone or its derived assemblies can be utilized as competent drug carriers, which can deliver drugs through the enhanced permeability and retention (EPR) effect or actively target lesion sites through binding with gp60 and secreted protein acidic and rich in cysteine (SPARC) in tumor sites. Furthermore, its biochemical stability and inertness make it a safe and biocompatible coating material for use in biomedical applications. Albumin-based surface modifying additives can be used to functionalize both macro substrates (e.g. surfaces of medical devices or implants) and nanoparticle surfaces (e.g. drug carriers and imaging contrast agents). In this review, we elaborate on the synthesis and applications of albumin-based bio-functional coatings and drug carriers, respectively.

Development of a bioadhesive nanoformulation with Glycyrrhiza glabra L. extract against Candida albicans

Glycyrrhiza glabra L. is considered an important source of bioactive compounds. This study aimed at the development of an efficient solution for the treatment of oral candidiasis. Several extracts of Glycyrrhiza glabra L. were prepared using different solvents and their potential in vitro antifungal activity was assessed. Ethanolic extracts showed the most promising results against C. albicans. This extract was incorporated into mucoadhesive nanoparticles (PLA, PLGA and alginate), which were further included in an oral gel, an oral film and a toothpaste, respectively. The results showed that nanoparticles were successfully produced, presenting a mean size among 100-900 nm with high encapsulation efficiency. In vitro studies showed that the most bioadhesive formulation was the oral film with extract-loaded PLGA nanoparticles, followed by the toothpaste with extract-loaded alginate nanoparticles and the oral gel with extract-loaded PLA nanoparticles.

An emerging integration between ionic liquids and nanotechnology: general uses and future prospects in drug delivery

There is a growing need to develop drug-delivery systems that overcome drawbacks such as poor drug solubility/loading/release, systemic side effects and limited stability. Ionic liquids (ILs) offer many advantages and their tailoring represents a valuable tuning tool. Nano-based systems are also prized materials that prevent drug degradation, enhance their transport/distribution and extend their release. Consequently, structures containing ILs and nanoparticles (NPs) have been developed to attain synergistic effects. This overview on the properties of ILs, NPs and of their combined structures, reveals the recent advances in these areas through a review of pertinent literature. The IL-NP structures present enhanced properties and the subsequent performance upgrade proves to be useful in drug delivery, although much is yet to be done.

Can natural polymers assist in delivering insulin orally?

Diabetes mellitus is one of the most grave and lethal non communicable diseases. Insulin is normally used to medicate diabetes. Due to bioavailability issues, the most regular route of administration is through injection, which may pose compliance problems to treatment. The oral administration thus appears as a suitable alternative, but with several important problems. Low stability of insulin in the gastrointestinal tract and low intestinal permeation are some of the issues. Encapsulation of insulin into polymer-based particles emerges as a plausible strategy. Different encapsulation approaches and polymers have been used in this regard. Polymers with different characteristics from natural or synthetic origin have been assessed to attain this goal, with natural polymers being preferable. Natural polymers studied so far include chitosan, alginate, carrageenan, starch, pectin, casein, tragacanth, dextran, carrageenan, gelatine and cyclodextrin. While some promising knowledge and results have been gained, a polymeric-based particle system to deliver insulin orally has not been introduced onto the market yet. In this review, effectiveness of different natural polymer materials developed so far along with fabrication techniques are evaluated.

Oral delivery of diabetes peptides - Comparing standard formulations incorporating functional excipients and nanotechnologies in the translational context

While some orally delivered diabetes peptides are moving to late development with standard formulations incorporating functional excipients, the demonstration of the value of nanotechnology in clinic is still at an early stage. The goal of this review is to compare these two drug delivery approaches from a physico-chemical and a biopharmaceutical standpoint in an attempt to define how nanotechnology-based products can be differentiated from standard oral dosage forms for oral bioavailability of diabetes peptides. Points to consider in a translational approach are outlined to seize the opportunities offered by a better understanding of both the intestinal barrier and of nano-carriers designed for oral delivery.

Dual chitosan/albumin-coated alginate/dextran sulfate nanoparticles for enhanced oral delivery of insulin

The potential of nanoparticles (NPs) to overcome the barriers for oral delivery of protein drugs have led to the development of platforms capable of improving their bioavailability. However, despite the progresses in drug delivery technologies, the success of oral delivery of insulin remains elusive and the disclosure of insulin mechanisms of absorption remains to be clarified. To overcome multiple barriers faced by oral insulin and to enhance the insulin permeability across the intestinal epithelium, here insulin-loaded alginate/dextran sulfate (ADS)-NPs were formulated and dual-coated with chitosan (CS) and albumin (ALB). The nanosystem was characterized by its pH-sensitivity and mucoadhesivity, which enabled to prevent 70% of in vitro insulin release in simulated gastric conditions and allowed a sustained insulin release following the passage to simulated intestinal conditions. The pH and time-dependent morphology of the NPs was correlated to the release and permeation profile of insulin. Dual CS/ALB coating of the ADS-NPs demonstrated augmented intestinal interactions with the intestinal cells in comparison to the uncoated-NPs, resulting in a higher permeability of insulin across Caco-2/HT29-MTX/Raji B cell monolayers. The permeability of the insulin-loaded ALB-NPs was reduced after the temperature was decreased and after co-incubation with chlorpromazine, suggesting an active insulin transport by clathrin-mediated endocytosis. Moreover, the permeability inhibition with the pre-treatment with sodium chlorate suggested that the interaction between glycocalix and the NPs was critical for insulin permeation. Overall, the developed nanosystem has clinical potential for the oral delivery of insulin and therapy of type 1 diabetes mellitus.

Impact of the in vitro gastrointestinal passage of biopolymer-based nanoparticles on insulin absorption

Behavior of insulin-loaded biopolymer-based nanoparticles upon passage through the gastrointestinal tract. Intestinal pH triggered insulin release from nanoparticles, allowing its permeability through cell-based engineered intestinal models.

Nanoparticle based insulin delivery system: the next generation efficient therapy for Type 1 diabetes

Diabetic cases have increased rapidly in recent years throughout the world. Currently, for type-1 diabetes mellitus (T1DM), multiple daily insulin (MDI) injections is the most popular treatment throughout the world. At this juncture, researchers are trying to develop different insulin delivery systems, especially through oral and pulmonary route using nanocarrier based delivery system. This next generation efficient therapy for T1DM may help to improve the quality of life of diabetic patients who routinely employ insulin by the subcutaneous route. In this paper, we have depicted various next generation nanocarrier based insulin delivery systems such as chitosan-insulin nanoparticles, PLGA-insulin nanoparticles, dextran-insulin nanoparticles, polyalkylcyanoacrylated-insulin nanoparticles and solid lipid-insulin nanoparticles. Modulation of these insulin nanocarriers may lead to successful oral or pulmonary insulin nanoformulations in future clinical settings. Therefore, applications and limitations of these nanoparticles in delivering insulin to the targeted site have been thoroughly discussed.

Development of acid-resistant alginate/trimethyl chitosan nanoparticles containing cationic β-cyclodextrin polymers for insulin oral delivery

In this study, the use of trimethylchitosan (TMC), by higher solubility in comparison with chitosan, in alginate/chitosan nanoparticles containing cationic β-cyclodextrin polymers (CPβCDs) has been studied, with the aim of increasing insulin uptake by nanoparticles. Firstly, TMCs were synthesized by iodomethane, and CPβCDs were synthesized within a one-step polycondensation reaction using choline chloride (CC) and epichlorohydrine (EP). Insulin-CβCDPs complex was prepared by mixing 1:1 portion of insulin and CPβCDs solutions. Then, nanoparticles prepared in a three-step procedure based on the iono-tropic pregelation method. Nanoparticles screened using experimental design and Placket Burman methodology to obtain minimum size and polydispercity index (pdI) and the highest entrapment efficiency (EE). CPβCDs and TMC solution concentration and pH and alginate and calcium chloride solution concentrations are found as the significant parameters on size, PdI, and EE. The nanoparticles with proper physicochemical properties were obtained; the size, PdI, and EE% of optimized nanoparticles were reported as 150.82 ± 21 nm, 0.362 ± 0.036, and 93.2% ± 4.1, respectively. The cumulative insulin release in intestinal condition achieved was 50.2% during 6 h. By SEM imaging, separate, spherical, and nonaggregated nanoparticles were found. In the cytotoxicity studies on Caco-2 cell culture, no significant cytotoxicity was observed in 5 h of incubation, but after 24 h of incubation, viability was decreased to 50% in 0.5 mμ of TMC concentration. Permeability studies across Caco-2 cells had been carried out, and permeability achieved in 240 min was 8.41 ± 0.39%, which shows noticeable increase in comparison with chitosan nanoparticles. Thus, according to the results, the optimized nanoparticles can be used as a new insulin oral delivery system.

Preparation methods of alginate nanoparticles

This article reviews available methods for the formation of alginate nano-aggregates, nanocapsules and nanospheres. Primarily, alginate nanoparticles are being prepared by two methods. In the "complexation method", complex formation on the interface of an oil droplet is used to form alginate nanocapsules, and complex formation in an aqueous solution is used to form alginate nano-aggregates. In a second method w/o emulsification coupled with gelation of the alginate emulsion droplet can be used to form alginate nanospheres. We review advantages and disadvantages of these methods, and give an overview of the properties of the alginate particles produced with these methods.

Particle designs for the stabilization and controlled-delivery of protein drugs by biopolymers: a case study on insulin

Natural biopolymers have attracted considerable interest for the development of delivery systems for protein drugs owing to their biocompatibility, non-toxicity, renewability and mild processing conditions. This paper offers an overview of the current status and future perspectives of particle designs using biopolymers for the stabilization and controlled-delivery of a model protein drug--insulin. We first describe the design criteria for polymeric encapsulation and subsequently classify the basic principles of particle fabrication as well as the existing particle designs for oral insulin encapsulation. The performances of these existing particle designs in terms of insulin stability and in vitro release behavior in acidic and alkaline media, as well as their in vivo performance are compared and reviewed. This review forms the basis for future works on the optimization of particle design and material formulation for the development of an improved oral delivery system for protein drugs.

Nanolayer encapsulation of insulin-chitosan complexes improves efficiency of oral insulin delivery

Current oral insulin formulations reported in the literature are often associated with an unpredictable burst release of insulin in the intestine, which may increase the risk for problematic hypoglycemia. The aim of the study was to develop a solution based on a nanolayer encapsulation of insulin-chitosan complexes to afford sustained release after oral administration. Chitosan/heparin multilayer coatings were deposited onto insulin-chitosan microparticulate cores in the presence of poly(ethylene) glycol (PEG) in the precipitating and coating solutions. The addition of PEG improved insulin loading and minimized an undesirable loss of the protein resulting from redissolution. Nanolayer encapsulation and the formation of complexes enabled a superior loading capacity of insulin (>90%), as well as enhanced stability and 74% decreased solubility at acid pH in vitro, compared with nonencapsulated insulin. The capsulated insulin administered by oral gavage lowered fasting blood glucose levels by up to 50% in a sustained and dose-dependent manner and reduced postprandial glycemia in streptozotocin-induced diabetic mice without causing hypoglycemia. Nanolayer encapsulation reduced the possibility of rapid and erratic falls of blood glucose levels in animals. This technique represents a promising strategy to promote the intestinal absorption efficiency and release behavior of the hormone, potentially enabling an efficient and safe route for oral insulin delivery of insulin in diabetes management.

Strategies to deliver peptide drugs to the brain

Neurological diseases such as neurodegeneration, pain, psychiatric disorders, stroke, and brain cancers would greatly benefit from the use of highly potent and specific peptide pharmaceuticals. Peptides are especially desirable because of their low inherent toxicity. The presence of the blood brain barrier (BBB), their short duration of action, and their need for parenteral administration limits their clinical use. However, over the past decade there have been significant advances in delivering peptides to the central nervous system. Angiopep peptides developed by Angiochem (Montreal, Canada), transferrin antibodies developed by ArmaGen (Santa Monica, USA), and cell penetrating peptides have all shown promise in delivering therapeutic peptides across the BBB after intravenous administration. Noninvasive methods of delivering peptides to the brain include the use of chitosan amphiphile nanoparticles for oral delivery and nose to brain strategies. The uptake of the chitosan amphiphile nanoparticles by the gastrointestinal epithelium is important for oral peptide delivery. Finally protecting peptides from plasma degradation is integral to the success of most of these peptide delivery strategies.

Calcium binding-mediated sustained release of minocycline from hydrophilic multilayer coatings targeting infection and inflammation

Infection and inflammation are common complications that seriously affect the functionality and longevity of implanted medical implants. Systemic administration of antibiotics and anti-inflammatory drugs often cannot achieve sufficient local concentration to be effective, and elicits serious side effects. Local delivery of therapeutics from drug-eluting coatings presents a promising solution. However, hydrophobic and thick coatings are commonly used to ensure sufficient drug loading and sustained release, which may limit tissue integration and tissue device communications. A calcium-mediated drug delivery mechanism was developed and characterized in this study. This novel mechanism allows controlled, sustained release of minocycline, an effective antibiotic and anti-inflammatory drug, from nanoscale thin hydrophilic polyelectrolyte multilayers for over 35 days at physiologically relevant concentrations. pH-responsive minocycline release was observed as the chelation between minocycline and Ca(2+) is less stable at acidic pH, enabling 'smart' drug delivery in response to infection and/or inflammation-induced tissue acidosis. The release kinetics of minocycline can be controlled by varying initial loading, Ca(2+) concentration, and Ca(2+) incorporation into different layers, enabling facile development of implant coatings with versatile release kinetics. This drug delivery platform can potentially be used for releasing any drug that has high Ca(2+) binding affinity, enabling its use in a variety of biomedical applications.

Intestinal receptor targeting for peptide delivery: an expert's personal perspective on reasons for failure and new opportunities

The technology has been available more than 25 years that would enable the oral delivery of vaccines, proteins and peptides, thus avoiding the need for injection. To this day, injection is still the mode of delivery, yet not the main mode of choice. This review focuses on several of the potential modes for oral delivery of peptides, proteins and vaccines. Additionally, the review will provide the reader with an insight into the problems and potential solutions for several of these modes of oral delivery of peptides and proteins.

Polymer-based oral peptide nanomedicines

Oral peptide delivery has been one of the major challenges of pharmaceutical sciences as it could lead to a great improvement of classical therapies, such as insulin, alongside making an important number of new therapies feasible. Successful oral delivery needs to fulfill two key tasks: to protect the macromolecules from degradation in the GI tract and to shuttle them across the intestinal epithelium in a safe and efficient fashion. Over the last decade, there have been numerous approaches based on the chemical modification of peptides and on the use of permeation enhancers, enzyme inhibitors and drug-delivery systems. Among the approaches developed to overcome these restrictions, the design of nanocarriers seems to be a particularly promising approach. This article is an overview on the state of the art of oral-peptide formulation strategies, with special attention to insulin delivery and the use of polymeric nanocarriers as delivery systems.

Oral delivery of therapeutic protein/peptide for diabetes--future perspectives

Diabetes is a metabolic disease and is a major cause of mortality and morbidity in epidemic proportions. A type I diabetic patient is dependent on daily injections of insulin, for survival and also to maintain a normal life, which is uncomfortable, painful and also has deleterious effects. Extensive efforts are being made worldwide for developing noninvasive drug delivery systems, especially via oral route. Oral route is the most widely accepted means of administration. However it is not feasible for direct delivery of peptide and protein drugs. To overcome the gastro-intestinal barriers various types of formulations such as polymeric micro/nanoparticles, liposomes, etc. are investigated. In the recent years lot of advances have taken place in developing and understanding the oral peptide delivery systems. Simultaneously, the development and usage of other peptides having anti-diabetic potentials are also considered for diabetes therapy. In this review we are focusing on the advances reported during the past decade in the field of oral insulin delivery along with the possibility of other peptidic incretin hormones such as GLP-1, exendin-4, for diabetes therapy.

Nanotechnology as a promising strategy for alternative routes of insulin delivery

Since its discovery, insulin has been used as highly specific and effective therapeutic protein to treat type 1 diabetes and later was associated to oral antidiabetic agents in the treatment of type 2 diabetes. Generally, insulin is administered parenterally. Although this route is successful, it still has several limitations, such as discomfort, pain, lipodystrophy at the injection sites and peripheral hyperinsulinemia, which may be the cause of side effects and some complications. Thus, alternative routes of administration have been developed, namely, those based on nanotechnologies. Nanoparticles, made of synthetic or natural materials, have been shown to successfully overcome the inherent barriers for insulin stability, degradation, and uptake across the gastrointestinal tract and other mucosal membranes. This review describes some of the many attempts made to develop alternative and more convenient routes for insulin delivery.

A review of the efficacy and safety of nanoparticle-based oral insulin delivery systems

Nanotechnology is providing new and innovative means to detect, diagnose, and treat disease. In this regard, numerous nanoparticle-based approaches have been taken in an effort to develop an effective oral insulin therapy for the treatment of diabetes. This review summarizes efficacy data from studies that have evaluated oral insulin therapies in experimental models. Also provided here is an overview of the limited safety data that have been reported in these studies. To date, the most promising approaches for nanoparticle-based oral insulin therapy appear to involve the incorporation of insulin into complex multilayered nanoparticles that are mucoadhesive, biodegradable, biocompatible, and acid protected and into nanoparticles that are designed to take advantage of the vitamin B(12) uptake pathway. It is anticipated that the continued investigation and optimization of nanoparticle-based formulations for oral delivery of insulin will lead to a much sought-after noninvasive treatment for diabetes. Such investigations also may provide insight into the use of nanoparticle-based formulations for peptide- and protein-based oral treatment of other diseases and for various food-related purposes.

Preparation, statistical optimization, and in vitro characterization of insulin nanoparticles composed of quaternized aromatic derivatives of chitosan

The aim of this study was the preparation, optimization, and in vitro characterization of insulin nanoparticles composed of methylated N-(4-N,N-dimethylaminobenzyl), methylated N-(4-pyridinyl), and methylated N-(benzyl) chitosan. Three types of derivatives were synthesized by the Schiff base reaction followed by quaternization. Nanoparticles were prepared by the polyelectrolyte complexation method. Experimental design D-optimal response surface methodology was used for the optimization of the nanoparticles. Independent variables were pH of polymer solution, concentration ratio of polymer/insulin, and also polymer type. Dependent variables include size, zeta potential, polydispersity index (PdI), and entrapment efficiency (EE%). Optimized nanoparticles were studied morphologically by transmission electron microscopy (TEM), and in vitro release of insulin from nanoparticles were determined under phosphate buffer (pH = 6.8) condition. Although a quadratic model has been chosen to fit the responses for size, PdI, and EE%, the zeta potential of the particles has been best fitted to 2-FI model. The optimized nanoparticles were characterized. The size of the particles were found to be 346, 318, and 289 nm; zeta potentials were 28.5, 27.7, and 22.2 mV; PdI of particles were 0.305, 0.333, and 0.437; and calculated EE% were 70.3%, 84.5%, and 69.2%, for methylated (aminobenzyl), methylated (pyridinyl), and methylated (benzyl) chitosan nanoparticles, respectively. TEM images show separated and non-aggregated nanoparticles with sub-spherical shapes and smooth surfaces. An in vitro release study of the prepared nanoparticles showed that the cumulative percentage of insulin released from the nanoparticles were 47.1%, 38%, and 68.7% for (aminobenzyl), (pyridinyl), and (benzyl) chitosan, respectively, within 300 min.