Whey protein-okra polysaccharide fraction blend edible films: tensile properties, water vapor permeability and oxygen permeability

Developing active and intelligent biodegradable packaging from food waste and byproducts: A review of sources, properties, film production methods, and their application in food preservation

Food waste and byproducts (FWBP) are a global issue impacting economies, resources, and health. Recycling and utilizing these wastes, due to processing and economic constraints, face various challenges. However, valuable components in food waste inspire efficient solutions like active intelligent packaging. Though research on this is booming, its material selectivity, effectiveness, and commercial viability require further analysis. This paper categorizes FWBP and explores their potential for producing packaging from both animal and plant perspectives. In addition, the preparation/fabrication methods of these films/coatings have also been summarized comprehensively, focusing on the advantages and disadvantages of these methods and their commercial adaptability. Finally, the functions of these films/coatings and their ultimate performance in protecting food (meat, dairy products, fruits, and vegetables) are also reviewed systematically. FWBP provide a variety of methods for the application of edible films, including being made into coatings, films, and fibers for food preservation, or extracting active substances directly or indirectly from them (in the form of encapsulation) and adding them to packaging to endow them with functions such as barrier, antibacterial, antioxidant, and pH response. In addition, the casting method is the most commonly used method for producing edible films, but more film production methods (extrusion, electrospinning, 3D printing) need to be tried to make up for the shortcomings of the current methods. Finally, researchers need to conduct more in-depth research on various active compounds from FWBP to achieve better application effects and commercial adaptability.

A novel polysaccharide/zein conjugate as an alternative green plastic

The flax seed cake is a waste product from flax oil extraction. Adding value to this wasted material aligns with the concept of circularity. In this study, we explored zein protein conjugation with flax mucilage for packaging material development. Although both flax mucilage and zein have excellent film-forming properties, they lack the required mechanical properties for industrial processing and are sensitive to high humidity. We present a simple and non-toxic one-pot method for developing the novel flax mucilage/zein conjugate. Where the flax mucilage undergoes oxidation to form aldehyde groups, which then react with zein's amino groups in a glycation process. The conjugates were analyzed using different techniques. The flax mucilage conjugate had a water-holding capacity of 87-62%. Increasing the zein content improved the surface smoothness of the films. On the other hand, higher levels of zein led to a significant decrease in film solubility (p < 0.05). The flax mucilage conjugate exhibited thermoplastic and elastic properties; revealing Young's modulus of 1-3 GPa, glass transition temperature between 49 °C and 103 °C and excellent processability with various industrial techniques. Showing its potential as a sustainable alternative to traditional plastics.

Development of pullulan-based nanocomposite films reinforced with starch nanocrystals for the preservation of fresh beef

BACKGROUND

Incorporation of polysaccharide-based nanofillers is an effective strategy to fabricate bio-nanocomposite films with preferable mechanical, barrier, and surface hydrophobicity properties compared to pure biopolymer films. The objective of this research is to investigate the influence of starch nanocrystals obtained from native (NSNC) and waxy rice starch (WSNC) on the physical-chemical properties of pullulan-based nanocomposite films and their preservation performance on fresh beef.

RESULTS

Continuous SNCs network structure was observed for pullulan-10% SNCs nanocomposite films, whereas the percolation network of SNCs was destroyed and became no longer continuous with increasing SNCs concentration up to 20% in pullulan films. Among the tested films, pullulan-10% SNCs films showed the highest TS values, lowest WVP and OTR values, due to the formation of percolating SNCs network in pullulan matrix. It is noteworthy that the WVP and OTR values of pullulan-10% WSNC films were significantly lower than that of pullulan-10% NSNC films, probably due to higher hydrophobicity and crystallinity of WSNC compared with NSNC. Beef pieces coated with pullulan-SNCs films had higher L^* and a^* values, lower TVB-N, TBARS, and TVC values during 7 days' storage at 4 °C compared with samples coated with pullulan films.

CONCLUSION

Pullulan-SNCs nanocomposite films, especially pullulan-WSNC films, could be potentially used as a coating material for fresh beef due to their desirable oxygen and water barrier properties. © 2022 Society of Chemical Industry.

Phytochemical Screening, Nutritional Value, Anti-Diabetic, Anti-Cancer, and Anti-Bacterial Assessment of Aqueous Extract from Abelmoschus esculentus Pods

Known for its high nutritional and medicinal value, okra (Abelmoschus esculentus) is commonly used for replacing plasma and expanding blood volume in humans. It is a major economic crop cultivated in tropical and subtropical regions worldwide. The present study aimed to investigate and evaluate the nutritional properties and prospective applications of the consumable parts of okra. The total ash content (mineral content), carbohydrate, crude fiber, fat, protein, and moisture fractions of okra pod aqueous extract were determined. The results show that okra aqueous extract contained 84.670–87.650% moisture, 1.514–1.197% ash, 7.857–8.261% carbohydrate, 2.367–3.410% crude protein, and 6.781–8.314% crude fiber. Okra was determined to have high nutritional value, with γ-tocopherol and α-tocopherol contents about 2.67 mg/100 g and 1.62 mg/100 g, respectively. High-performance liquid chromatography (HPLC) was performed to determine the sugars present in okra aqueous extract. The water-soluble polysaccharide content was 10.22–16.45 g/100 g. The tested aqueous extract was a rich source of total phenolic compounds in gallic acid equivalents (288.2–3426.2 mg/100 g), chlorophyll a (3.53 mg/100), chlorophyll b (2.43 mg/100), and carotenoids (1.3 mg/100 g). The detected minerals were Ca, Mg, Cu, Zn, Fe, K, Na, and Mn. Atomic absorption spectrometry analysis of these ashed minerals was performed. In addition to the nutritional benefits, okra pods exhibited antimicrobial, anticancer, and antioxidant properties. The aqueous extract was found to be potentially active against bacterial strains of Staphylococcus aureus (MIC value = 21.8 mg/mL), Escherichia coli (MIC value = 18.7 mg/mL), Bacillus cereus (MIC value = 20.7 mg/mL), and Klebsiella pneumoniae (MIC value = 20.2 mg/mL). Okra aqueous extract exhibited inhibitory activity against α-amylase (IC50 = 120 µg/mL) and α-glucosidase (IC50 = 115 µg/mL). The okra extract exhibited high anticancer activity, concentration-dependent and with an IC50 value of about 158.3 mg/mL. The results indicated that okra pods have nutritional and medicinal properties and, hence, can be used as a functional food and broad-spectrum nutraceutical supplement.

Structure and in vitro bioactive properties of O/W emulsions generated with fava bean protein hydrolysates

The use of plant-derived proteins in the generation of food products is gaining popularity as an alternative to proteins of animal origin. This study described the emulsifying and bioactive properties of fava bean protein hydrolysates (FBH) generated at low and high degree of hydrolysis (DH), i.e., FBH₈ (low DH: 8.4 ± 0.3) and FBH₂₁₀ (high DH: 15.6 ± 0.7) when adjusted to three different pHs (3.0, 5.0 and 8.0). Overall, FBH₈, had more favourable emulsifying properties compared to the FBH_210. The emulsion generated with FBH₈ at pH 8.0 also had the highest antioxidant activity when measured by the oxygen radical absorbance capacity (ORAC) and ferric reducing antioxidant power (FRAP) assays with values of 1108.6 ± 3.8 and 1159.9 ± 20.5 μmol Trolox Eq·g^-1 emulsion, respectively. The antioxidant activity of the emulsions, in most cases, remained unchanged following in vitro simulated gastrointestinal digestion. Both the FBH₈ and FBH₂₁₀ emulsions following in vitro simulated gastrointestinal digestion were able to inhibit the activities of dipeptidyl peptidase-IV (DPP-IV) and angiotensin converting enzyme (ACE) with ∼45% and 65% inhibition, respectively. These results indicated that hydrolysates from fava bean may find use for the generation of bioactive emulsions.

Konjac glucomannan-based composite films fabricated in the presence of carnauba wax emulsion: hydrophobicity, mechanical and microstructural properties evaluation

Despite the excellent characteristics of carnauba wax (CW), hydrophobicity in particular, its complementary effect on the enhancement of konjac glucomannan (KGM) films remains poorly documented. KGM is a promising food bio-packaging material with excellent film-forming abilities, which could be improved further through modification of its hydrophilic nature using CW. In this study, emulsified composite films (KW) of KGM incorporated with varied CW concentration levels (0%, 4%, 8%, 12%, 16% and 20% w/w) were successfully prepared by solvent casting method. Increasing CW in KW films significantly improved the hydrophobicity, barrier and mechanical properties. The recorded improvements in functional properties relative to KGM films include fivefold solubility reduction, twofold contact angle and strength increment, as well as significant increase in stretch (61%) and decrease in water vapour transmission rate (48%). Microstructure analyses using scanning electron microscopy demonstrated remarkable improvements in cohesiveness, smoothness and homogeneity in KW aggregates with higher CW concentrations. Generally, our findings reveal the potential use of KW films as food packaging material which could reduce the availability of unsafe and environmentally unfriendly food packages in the market.

Characterization of Active Edible Films based on Citral Essential Oil, Alginate and Pectin

Thermal, structural and physico-chemical properties of different composite edible films based on alginate and pectin with the addition of citral essential oil (citral EO) as an agent to improve barrier properties, were investigated. The obtained films were clear and transparent, with a yellow hue that increased with citral EO addition. All the films displayed good thermal stability up to 160 °C, with a slight improvement observed by increasing the amount of citral EO in the composites. Gas transmission rate (GTR) strongly depended on the polymer structure, gas type and temperature, with improvement in barrier performance for composite samples. Also, citral EO did not exert any weakening action on the tensile behavior. On the contrary, an increase of the elastic modulus and of the tensile strength was observed. Lastly, water contact angle measurements demonstrated the dependence of the film wettability on the content of citral EO.

Recent Advances in Edible Polymer Based Hydrogels as a Sustainable Alternative to Conventional Polymers

The over increasing demand of eco-friendly materials to counter various problems, such as environmental issues, economics, sustainability, biodegradability, and biocompatibility, open up new fields of research highly focusing on nature-based products. Edible polymer based materials mainly consisting of polysaccharides, proteins, and lipids could be a prospective contender to handle such problems. Hydrogels based on edible polymer offer many valuable properties compared to their synthetic counterparts. Edible polymers can contribute to the reduction of environmental contamination, advance recyclability, provide sustainability, and thereby increase its applicability along with providing environmentally benign products. This review is highly emphasizing on toward the development of hydrogels from edible polymer, their classification, properties, chemical modification, and their potential applications. The application of edible polymer hydrogels covers many areas including the food industry, agricultural applications, drug delivery to tissue engineering in the biomedical field and provide more safe and attractive products in the pharmaceutical, agricultural, and environmental fields, etc.

Effect of replacement of corn starch by whey protein isolate in biodegradable film blends obtained by extrusion

The aim of this study was to evaluate the effect of replacing corn starch by whey protein isolated (WPI) in biodegradable polymer blends developed by extrusion. X-ray diffraction showed the presence of a Vh-type crystalline arrangement. The films were homogeneous, indicating strong interfacial adhesion between the protein and the thermoplastic starch matrix (TPS) as observed in scanning electron microscopy. The addition of WPI on TPS matrix promoted an increase in the thermal stability of the materials. It was observed 58.5% decrease in the water vapor permeability. The effect of corn starch substitution by WPI on mechanical properties resulted in a more resistant and less flexible film when compared the TPS film. The addition of WPI caused greenish yellow color and less transparent films. The substitution of corn starch by WPI made it possible to obtain polymer blends with improved properties and represents an innovation for application as a packaging material.

Characterization of a starfish gelatin film containing vanillin and its application in the packaging of crab stick

To explore the use of starfish gelatin (SFG) films as a biodegradable material, SFG from starfish was extracted and used as a film material. In addition, to provide antimicrobial activity and enhanced flavor of SFG films, vanillin was incorporated. As the concentration of vanillin increased, the tensile strength of the films increased and water vapor permeability decreased. With regard to the structural characteristics of SFG films containing vanillin, the microstructure of the SFG films was not affected by the addition of vanillin. In addition, the SFG films containing vanillin exhibited antimicrobial activity against Listeria monocytogenes. As the application of the SFG films, crab sticks were packed with SFG films containing 0.05% vanillin. During storage, the populations of L. monocytogenes inoculated on crab sticks wrapped with SFG films containing vanillin were lower than those on the control sample, suggesting that SFG films containing vanillin can be useful in active food packaging.

Development of crayfish bio-based plastic materials processed by small-scale injection moulding

BACKGROUND

Protein has been investigated as a source for biodegradable polymeric materials. This work evaluates the development of plastic materials based on crayfish and glycerol blends, processed by injection moulding, as a fully biodegradable alternative to conventional polymer-based plastics. The effect of different additives, namely sodium sulfite or bisulfite as reducing agents, urea as denaturing agent and L-cysteine as cross-linking agent, is also analysed.

RESULTS

The incorporation of any additive always yields an increase in energy efficiency at the mixing stage, but its effect on the mechanical properties of the bioplastics is not so clear, and even dampened. The additive developing a greater effect is L-cysteine, showing higher Young's modulus values and exhibiting a remnant thermosetting potential. Thus, processing at higher temperature yields a remarkable increase in extensibility.

CONCLUSION

This work illustrates the feasibility of crayfish-based green biodegradable plastics, thereby contributing to the search for potential value-added applications for this by-product.

Effect of okra cell wall and polysaccharide on physical properties and stability of ice cream

Stabilizers are used in ice cream to increase mix viscosity, promote smooth texture, and improve frozen stability. In this study, the effects of varying concentrations (0.00%, 0.15%, 0.30%, and 0.45%) of okra cell wall (OKW) and its corresponding water-soluble polysaccharide (OKP) on the physical characteristics of ice cream were determined. Ice cream mix viscosity was measured as well as overrun, meltdown, and consumer acceptability. Ice recrystallization was determined after ice cream was subjected to temperature cycling in the range of -10 to -20 °C for 10 cycles. Mix viscosity increased significantly as the concentrations of OKW and OKP increased. The addition of either OKW or OKP at 0.15% to 0.45% significantly improved the melting resistance of ice cream. OKW and OKP at 0.15% did not affect sensory perception score for flavor, texture, and overall liking of the ice cream. OKW and OKP (0.15%) reduced ice crystal growth to 107% and 87%, respectively, as compared to 132% for the control (0.00%). Thus, our results suggested the potential use of OKW and OKP at 0.15% as a stabilizer to control ice cream quality and retard ice recrystallization. OKP, however, at 0.15% exhibited greater effect on viscosity increase and on ice recrystallization inhibition than OKW.

Evaluation of fatty acid and amino acid compositions in okra (Abelmoschus esculentus) grown in different geographical locations

Okra has different uses as a food and a remedy in traditional medicine. Since it produces many seeds, distribution of the plant is also quite easy. Although seed oil yield is low (4.7%), since the linoleic acid composition of the seed oil is quiet high (67.5%), it can still be used as a source of (UNSAT) unsaturated fatty acids. In this study, samples of okra grown in four different locations were analyzed to measure fatty acid and amino acid compositions. The content of the lipid extraction ranged from 4.34% to 4.52% on a dry weight basis. Quantitatively, the main okra fatty acids were palmitic acid (29.18–43.26%), linoleic acid (32.22–43.07%), linolenic acid (6.79–12.34%), stearic acid (6.36–7.73%), oleic acid (4.31–6.98%), arachidic acid (ND–3.48%), margaric acid (1.44–2.16%), pentadecylic acid (0.63–0.92%), and myristic acid (0.21–0.49%). Aspartic acid, proline, and glutamic acids were the main amino acids in okra pods, while cysteine and tyrosine were the minor amino acids. Statistical methods revealed how the fatty acid and amino acid contents in okra may be affected by the sampling location.

Preparation and characterization of mucilage polysaccharide for biomedical applications

In the present investigation, the polysaccharide/mucilage from waste of Abelmoscus esculentus by modification in hot extraction using two different solvents (Acetone, Methanol) were extracted, characterized and further compared with seaweed polysaccharide for their potential applications. The percentage yield, emulsifying capacity and swelling index of this mucilage were determined. The macro algae and okra waste, gave high % yield (22.2% and 8.6% respectively) and good emulsifying capacity (EC%=52.38% and 54.76% respectively) with acetone, compared to methanol (11.3% and 0.28%; EC%=50%) (PH=7) while swelling index was greater with methanol than acetone extracts respectively. The infrared (I.R.) spectrum of the samples was recorded to investigate the chemical structure of mucilage. Thermal analysis of the mucilage was done with TGA (Thermal Gravimetric Analyzer) and DSC (Differential Scanning Calorimeter) which showed both okra and algal polysaccharide were thermostable hydrogels.

Whey protein film with oxygen scavenging function by incorporation of ascorbic acid

Residual O(2) in a package headspace can be removed by an O(2)-absorbing sachet, which can be harmful if swallowed by the consumer, or by a chemically-active plastic packaging film, which is difficult to recycle. An edible, O(2)-absorbing film would avoid these disadvantages. The objective of our research was to assess the O(2)-scavenging potential of an edible whey protein isolate (WPI) film incorporating ascorbic acid (AA). AA at 0.05, 0.1, or 0.2 M was added to 5% (w/w) heat-denatured WPI film-forming solutions with WPI : glycerol (Gly) ratio of 1: 1.00, 1: 0.80, or 1: 0.67. The pH of solutions was then adjusted to 3.5 (below pK(a1) of AA), to stabilize AA against oxidation, before film casting. The mechanical properties, O(2) permeabilities, and thermal transitions of films were measured. Activation of the O(2)-scavenging function of the AA-incorporated films was accomplished by adjustment of the films to pH ≥ 7. O(2)-scavenging ability of AA-incorporated WPI films was determined by measuring residual O(2) in the headspace of a high-barrier container. Incorporation of AA into WPI film decreased film tensile strength and further reduced O(2) permeability at each WPI : Gly ratio. AA-containing films adjusted to pH ≥ 7 demonstrated O(2) absorption proportional to AA content, consistent with theoretical O(2)-scavenging capacity. Thermal transition measurements indicated that AA was involved in WPI structural modification and decreased the degradation temperature of WPI-based film. The demonstrated O(2)-scavenging function, improved O(2) barrier and acceptable mechanical properties of AA-incorporated films indicate potential commercial usefulness.

PRACTICAL APPLICATION

Ascorbic acid-incorporated whey protein film with oxygen scavenging function can be used to extend shelf lives of a wide variety of oxygen-sensitive products by eliminating headspace oxygen as well as oxygen permeating through the packaging wall over time. Edible oxygen-scavenger film has the advantages of avoiding both accidental consumption and nonrecyclability of conventional oxygen scavenger systems.