Validation of a generic quantitative (1)H NMR method for natural products analysis

DESIGNER fraction concept unmasks minor bioactive constituents in red clover (Trifolium pratense L.)

In botanical extracts, highly abundant constituents can mask or dilute the effects of other, and often, more relevant biologically active compounds. To facilitate the rational chemical and biological assessment of these natural products with wide usage in human health, we introduced the DESIGNER approach of Depleting and Enriching Selective Ingredients to Generate Normalized Extract Resources. The present study applied this concept to clinical Red Clover Extract (RCE) and combined phytochemical and biological methodology to help rationalize the utility of RCE supplements for symptom management in postmenopausal women. Previous work has demonstrated that RCE reduces estrogen detoxification pathways in breast cancer cells (MCF-7) and, thus, may serve to negatively affect estrogen metabolism-induced chemical carcinogenesis. Clinical RCE contains ca. 30% of biochanin A and formononetin, which potentially mask activities of less abundant compounds. These two isoflavonoids are aryl hydrocarbon receptor (AhR) agonists that activate P450 1A1, responsible for estrogen detoxification, and P450 1B1, producing genotoxic estrogen metabolites in female breast cells. Clinical RCE also contains the potent phytoestrogen, genistein, that downregulates P450 1A1, thereby reducing estrogen detoxification. To identify less abundant bioactive constituents, countercurrent separation (CCS) of a clinical RCE yielded selective lipophilic to hydrophilic metabolites in six enriched DESIGNER fractions (DFs 01-06). Unlike solid-phase chromatography, CCS prevented any potential loss of minor constituents or residual complexity (RC) and enabled the polarity-based enrichment of certain constituents. Systematic analysis of estrogen detoxification pathways (ERα-degradation, AhR activation, CYP1A1/CYP1B1 induction and activity) of the DFs uncovered masked bioactivity of minor/less abundant constituents including irilone. These data will allow the optimization of RCE with respect to estrogen detoxification properties. The DFs revealed distinct biological activities between less abundant bioactives. The present results can inspire future carefully designed extracts with phytochemical profiles that are optimized to increase in estrogen detoxification pathways and, thereby, promote resilience in women with high-risk for breast cancer. The DESIGNER approach helps to establish links between complex chemical makeup, botanical safety and possible efficacy parameters, yields candidate DFs for (pre)clinical studies, and reveals the contribution of minor phytoconstituents to the overall safety and bioactivity of botanicals, such as resilience promoting activities relevant to women's health.

Application of the Analytical Procedure Lifecycle Concept to a Quantitative 1H NMR Method for Total Dammarane-Type Saponins

Dammarane-type saponins (DTSs) exist in various medicinal plants, which are a class of active ingredients with effects on improving myocardial ischemia and immunomodulation. In this study, a quantitative ¹H NMR method of total DTSs in herbal medicines was developed based on the analytical procedure lifecycle. In the first stage (analytical procedure design), the Ishikawa diagram and failure mode effects and criticality analysis were used to conduct risk identification and risk ranking. Plackett-Burman design and central composite design were used to screen and optimize critical analytical procedure parameter. Then, the method operable design region was obtained through modeling. In the second stage (analytical procedure performance qualification), the performance of methodological indexes was investigated based on analytical quality by design. As examples of continued procedure performance verification, the method was successfully applied to determine the total DTSs in herbal pharmaceutical preparations and botanical extracts. As a general analytical method to quantify total DTSs in medicinal plants or pharmaceutical preparations, the developed method provides a new quality control strategy for various products containing dammarane-type saponin.

Characterization of Calculus bovis by principal component analysis assisted qHNMR profiling to distinguish nefarious frauds

A new approach is developed for the reliable classification of Calculus bovis along with the identification of willfully contaminated C. bovis species and the quantification of unclaimed adulterants. Guided by a principal component analysis, NMR data mining achieved a near-holistic chemical characterization of three types of authenticated C. bovis, including natural C. bovis (NCB), in vitro cultured C. bovis (Ivt-CCB), and artificial C. bovis (ACB). In addition, species-specific markers used for quality evaluation and species classification were confirmed. That is, the content of taurine in NCB is near negligible, while choline and hyodeoxycholic acid are characteristic for identifying Ivt-CCB and ACB, respectively. Besides, the peak shapes and chemical shifts of H₂-25 of glycocholic acid could assist in the recognition of the origins of C. bovis. Based on these discoveries, a set of commercial NCB samples, macroscopically identified as problematic species, was examined with deliberately added sugars and outliers discovered. Absolute quantification of the identified sugars was realized by qHNMR using a single, nonidentical internal calibrant (IC). This study represents the first systematic study of C. bovis metabolomics via an NMR-driven methodology, which advances the toolbox for quality control of TCM and provides a more definitive reference point for future chemical and biological studies of C. bovis as a valuable materia medica.

Stability of valeriana-type iridoid glycosides from rhizomes of Nardostachys jatamansi and their protection against H2O2-induced oxidative stress in SH-SY5Y cells

Nardostachys jatamansi is close to Valerian in consideration of their same psychoactive effects, such as sedation and neuroprotection. Valeriana-type iridoids are major active components of Valerian, but few valeriana-type iridoids have been isolated from N. jatamansi. Iridoid-targeting chemical investigation of the rhizomes of N. jatamansi resulted in the isolation of seven valeriana-type iridoid glycosides, four of which are previously undescribed. Their structures were determined through NMR spectroscopy, high-resolution mass spectrometry, and optical rotation experiments. In addition, the inaccurate configurations of patrinalloside and 6″-acetylpatrinalloside from previous reports were corrected. These compounds, unstable due to alcoholic solvents, were more stable in the mixtures than in purified forms, as monitored by the qNMR method, supporting the use of natural products as mixtures. Furthermore, the isolates, as well as crude and solvent partition extracts, were found to have a protective effect against hydrogen-peroxide-induced toxicity in human neuroblastoma cells, as confirmed by assays for cell viability and antioxidation. These findings suggest the potential therapeutic application of the valeriana-type iridoid glycosides isolated herein with improved biochemical stability.

Determination of Total Sennosides and Sennosides A, B, and A1 in Senna Leaflets, Pods, and Tablets by Two-Dimensional qNMR

In the present work, a two-dimensional qNMR method for the determination of sennosides was established. Using band-selective HSQC and the cross correlations of the characteristic 10-10' bonds, we quantified the total amount of the value-determining dianthranoids in five minutes, thus, rendering the method not only fast, but also specific and stability indicating. The validation of the method revealed excellent accuracy (recovery rates of 98.5 to 103%), precision (RSD values of 3.1%), and repeatability (2.2%) and demonstrated the potential of 2D qNMR in the quality control of medicinal plants. In a second method, the use of 2D qNMR for the single analysis of sennosides A, B, and A1 was evaluated with acceptable measurement times (31 min), accuracy (93.8%), and repeatability (5.4% and 5.6%) for the two major purgatives sennoside A and B. However, the precision for sennoside B and A1 was not satisfactory, mainly due to the low resolution of the HSQC signals of the two compounds.

Quantitative 1HNMR Spectroscopy: Analysis of Zinc Gluconate in Utozinc® Tablets, a Mixture of Zinc Gluconate and Vitamin C

BACKGROUND

Zinc is an essential metal for humans and plays key roles in several biological events such as immunity, allergy, growth, and inflammation. The deficiency in zinc causes an increased infection rate with pathogens. Organo-zincates such as zinc gluconate are known for better absorption compared with their inorganic zinc salts. Its role in enhancing the immune system has driven a huge demand for organo-zinc supplements and in the treatment protocol of coronavirus disease, the causative agent of the COVID-19 pandemic.

OBJECTIVE

Herein, we report on a quantitative analysis of zinc gluconate in the authentic form in presence of vitamin C, and the method was applied to their dosage form (Utozinc® tablets). The method is simple, accurate, and validated according to ICH guidelines.

METHOD

Quantification of zinc gluconate formulated with vitamin C (Utozinc tablets) using Q-1HNMR. Maleic acid and deuterium oxide were used as internal standards and solvents, respectively.

RESULTS

The linearity range, the limit of detection and quantification, stability, precision, and accuracy, were validated. The validation of the method within five concentration levels (from 10 to 50 mg/0.5 mL D2O) afforded a limit of detection of 4.58 mg/mL, a quantification limit of 15.27 mg/mL, and excellent linearity.

CONCLUSIONS

The method proposed in the present study is simple, fast, nondestructive, and accurate. Zinc gluconate quantification values obtained by the Q-1HNMR method were found to show an acceptable correlation with those obtained by the thin-layer chromatographic technique.

HIGHLIGHTS

The method was successfully applied to Utozinc tablets, and the results were compared with the reported reference pharmacopeial method. The salt exchange between maleic acid (IS) and zinc gluconate was tested by noticing the change in the chemical shift of IS and zinc gluconate.

Quantitative profiling of comprehensive composition in compound herbal injections: An NMR approach applied on Shenmai injection

INTRODUCTION

Compound herbal injections (CHIs) can be regarded as a significant innovation in the modernisation of herbal medicine. Therefore, improving the quality control level of CHIs has always been an active research topic in traditional herbal medicine.

OBJECTIVES

In this study, Shenmai injection was used as a representative sample for investigating the ability of proton nuclear magnetic resonance (¹ H NMR) in the quality evaluation of CHIs.

METHODS

A quantitative ¹ H NMR method was developed to simultaneously determine the contents of total ginsenosides, polysorbate 80, and 20 primary metabolites in Shenmai injection. Multivariate statistical analysis was combined to compare differences between samples from different manufacturers.

RESULTS

It was found that the combined measurement uncertainty of each component is less than 1.61%, which demonstrates the reliability of the method. Furthermore, the components determined by this method account for up to 92.64% of the total solids, which is an unprecedented success in the analysis of Shenmai injection. In the end, the method was applied to the quality comparison of Shenmai injection from six manufacturers. The results showed that the differences among the samples from the six manufacturers were reflected in multiple types of components.

CONCLUSION

This study fully demonstrates the superiority of the quantitative ¹ H NMR method in comprehensive composition profiling of CHIs, which is conducive to improving the quality control level of Shenmai injection. Further, the present study can be used as a reference study for the research on the quality and safety of CHIs.

Monitoring protein unfolding transitions by NMR-spectroscopy

NMR-spectroscopy has certain unique advantages for recording unfolding transitions of proteins compared e.g. to optical methods. It enables per-residue monitoring and separate detection of the folded and unfolded state as well as possible equilibrium intermediates. This allows a detailed view on the state and cooperativity of folding of the protein of interest and the correct interpretation of subsequent experiments. Here we summarize in detail practical and theoretical aspects of such experiments. Certain pitfalls can be avoided, and meaningful simplification can be made during the analysis. Especially a good understanding of the NMR exchange regime and relaxation properties of the system of interest is beneficial. We show by a global analysis of signals of the folded and unfolded state of GB1 how accurate values of unfolding can be extracted and what limits different NMR detection and unfolding methods. E.g. commonly used exchangeable amides can lead to a systematic under determination of the thermodynamic protein stability. We give several perspectives of how to deal with more complex proteins and how the knowledge about protein stability at residue resolution helps to understand protein properties under crowding conditions, during phase separation and under high pressure.

NMR technique and methodology in botanical health product analysis and quality control

Botanicals have played an important role in maintaining human health and well-being throughout history. During the past few decades in particular, the use of botanical health products has gained more popularity. Whereas, quality, safety and efficacy concerns have continuously been critical issues due to the intrinsic chemical complexity of botanicals. Chemical analytical technologies play an imperative role in addressing these issues. Nuclear magnetic resonance (NMR) spectroscopy has proven to be a powerful and useful tool for the investigation of botanical health products. In this review, NMR techniques and methodologies that have been successfully applied to the research and development of botanical health products in all stages, from plants to products, are discussed and summarized. Furthermore, applications of NMR together with other analytical techniques in a variety of domains of botanical health products investigation, such as plant species differentiation, adulteration detection, and bio-activity evaluation, are discussed and illustrated with typical examples. This article provides an overview of the potential uses of NMR techniques and methodologies in an attempt to further promote their recognition and utilization in the field of botanical health products analysis and quality control.

Accurate detection of perchlorate in epoxy resins via chlorine-35 quantitative quadrupolar NMR (qQNMR)

We present herein the application of a qQNMR method that uses a quadrupolar nucleus such as chlorine-35 for the quantification of perchlorate in epoxy resins.

Investigation of red clover (Trifolium pratense) isoflavonoid residual complexity by off-line CCS-qHNMR

The importance of Trifolium pratense L. as a dietary supplement and its use in traditional medicine prompted the preparation of a thorough metabolite profile. This included the identification and quantitation of principal constituents as well as low abundant metabolites that constitute the residual complexity (RC) of T. pratense bioactives. The purity and RC of isoflavonoid fractions from standardized red clover extract (RCE) was determined using an off-line combination of countercurrent separation (CCS) and two orthogonal analytical methodologies: quantitative ¹H NMR spectroscopy with external calibration (EC-qHNMR) and LC-MS. A single-step hydrostatic CCS methodology (Centrifugal Partition Chromatography [CPC]) was developed that fractionated the isoflavonoids with a hexanes-ethyl acetate-methanol-water (HEMWat) 5.5/4.5/5/5, v/v solvent system (SS) into 75 fractions containing 3 flavonolignans, 2 isoflavonoid glycosides, as well as 17 isoflavonoids and related compounds. All metabolites were identified and quantified by qHNMR spectroscopy. The data led to the creation of a complete isoflavonoid profile to complement the biological evaluation. For example, fraction 69 afforded 90.5% w/w biochanin A (17), with 0.33% w/w of prunetin (16), and 0.76% w/w of maackiain (15) as residual components. Fraction 27 with 89.4% w/w formononetin (13) as the major component had, in addition, a residual complexity consisting of 3.37%, 0.73%, 0.68% w/w of pseudobaptigenin (11), kaempferol (10) and pratensein (8), respectively. Despite the relatively high resolving power of CPC, and not unexpectedly, the chromatographic fractions retained varying degrees of the original metabolomic diversity. Collectively, the extent of metabolomic diversity should be recognized and used to guide the development of isolation strategies, especially when generating samples for bioactivity evaluation. The simultaneous structural and quantitative characterization enabled by qNMR, supported by LC-MS measurements, enables the evaluation of a relatively large number of individual fractions and, thereby, advances both the chemical and biological evaluation of active principles in complex natural products.

Quantitative Quadrupolar NMR (qQNMR) via nitrogen-14 for the accurate control of L-carnitine in food supplements

A qQNMR methodology using nitrogen-14 as the quadrupolar nucleus of choice has been introduced for the first time as a robust and validated method to determine and quantify L-carnitine in food supplements. The quantification has been carried out by the alternative use of a calibration curve or by addition of ammonium chloride as internal standard. The method was validated at seven concentration levels in the range of 5.58-99.26 mM, affording intra- and inter day accuracies lower than 6.84% (expressed in CV), robustness towards temperature and recycle delay, limit of detection (LOD) of 2.48 mM, limit of quantification (LOQ) of 5.58 mM and remarkably with absence of matrix effect.

Research Progress of NMR in Natural Product Quantification

In the fields of medicine and health, traditional high-performance liquid chromatography or UV-visible spectrophotometry is generally used for substance quantification. However, over time, nuclear magnetic resonance spectroscopy (NMR) has gradually become more mature. Nuclear magnetic resonance spectroscopy has certain advantages in the quantitative analysis of substances, such as being nondestructive, having a high flux and short analysis time. Nuclear magnetic resonance spectroscopy has been included in the pharmacopoeiae of various countries. In this paper, the principle of nuclear magnetic resonance spectroscopy and the recent progress in the quantitative study of natural products by NMR are reviewed, and its application in the quantitative study of natural products is proposed. At the same time, the problems of using NMR alone to quantify natural products are summarized and corresponding suggestions are put forward.

Tandem of Countercurrent Separation and qHNMR Enables Gravimetric Analyses: Absolute Quantitation of the Rhodiola rosea Metabolome

Off-line combination of countercurrent separation (CCS) and quantitative ¹H NMR (qHNMR) methodologies enabled the systematic dissection and gravimetric quantification of a chemically complex Rhodiola rosea crude extract (RCE). The loss-free nature and high selectivity of CCS achieved the quantitative discrimination of fatty acids (FAs), sugars, and proanthocyanidins (PACs) from ten other metabolite classes: phenylpropanoids, phenylethanoids, acyclic monoterpenoid glycosides, pinene derived glycosides, benzyl alcohol glycosides, cyanogenic glycosides, flavonoids, gallic acids, methylparabens, and cuminol glycosides. The ability of CCS to remove ("knockout") PACs completely resolved challenges with baselines that plague NMR and UHPLC analyses and produce inaccurate integral and AUC quantitation, respectively. NMR analysis of the non-PAC fractions enabled unambiguous identification of metabolites and their characteristic resonances for subsequent multitarget absolute quantification by qHNMR using a single, nonidentical internal calibrant (IC). An orthogonal LC-MS/MS method validated the gravimetric nature of the CCS-qHNMR analytical tandem. Underlying this LC-based cross-validation, comprehensive phytochemical isolation and characterization established 19 single-compound reference standards that represented all ten metabolite classes. Finally, quantum mechanical ¹H iterative Full Spin Analysis (HiFSA) of each standard provided a blueprint for future structural dereplication, identification, and quantification of Rhodiola marker constituents. The combination of two gravimetric analytical methods, loss-free CCS and IC-qHNMR, realizes the first chemical standardization of a botanical material that comprehensively captures a metabolome and permits absolute quantification.

Measuring the rate of in-vitro drug release from polymeric nanoparticles by 19F solution state NMR spectroscopy

We report what we believe is the first use of ¹⁹F NMR spectroscopy to directly measure in-vitro release (IVR) from polymeric nanoparticles (PNPs). Using ¹⁹F NMR we selectively measured IVR of AZD2811 from PNPs. Due to rapid nuclear relaxation in solid-like environments only AZD2811 in solution is detected, and physical separation from the PNPs isn't required. The NMR approach and ultra-centrifugation/UHPLC were shown to be equivalent. The selectivity of ¹⁹F NMR means it is readily applied to complex IVR media such as recombinant human serum albumin (rHSA).

Quantitative quadrupolar NMR (qQNMR) using nitrogen-14 for the determination of choline in complex matrixes

NMR offers the unique potential to selectively excite the chosen nuclei avoiding in an extraordinary way the matrix effect. Quantitative Nitrogen-14 NMR (¹⁴N qNMR) spectroscopy has been introduced for the first time as a robust and validated method to determine choline in a variety of matrixes including quinoa grains, instant coffee and food supplements. A study about the ion pairing of choline bitartrate in aqueous solution by means of diffusion PGSE, NOESY and HOESY NMR have been also provided. Validation of the method within eight concentrations levels (from 1.58 to 79.0 mM) afforded a limit of detection of 400 μg/mL (1.58 mM), a quantification limit of 1000 μg/mL (3.95 mM), excellent linearity (R² higher than 0.999), intra-/inter-day precisions lower than 1.24% (CV), recoveries of 93.5%-102.5%, and complete absence of matrix effect. The fast and reliable quantification of choline together with the accuracy and simplicity of this new approach make it useful in the development of analytical procedures that could dramatically affect traditional analysis.

Auto-hydrolysis of red clover as "green" approach to (iso)flavonoid enriched products

Optimal parameters for the auto-hydrolysis of (iso)flavone glycosides to aglycones in ground Trifolium pratense L. plant material were established as a "green" method for the production of a reproducible red clover extract (RCE). The process utilized 72-h fermentation in DI water at 25 and 37 °C. The aglycones obtained at 25 °C, as determined by UHPLC-UV and quantitative ¹H NMR (qHNMR), increased significantly in the auto-hydrolyzed (ARCE) (6.2-6.7% w/w biochanin A 1, 6.1-9.9% formononetin 2) vs a control ethanol (ERCE) extract (0.24% 1, 0.26% 2). After macerating ARCE with 1:1 (v/v) diethyl ether/hexanes (ARCE-d/h), 1 and 2 increased to 13.1-16.7% and 14.9-18.4% w, respectively, through depletion of fatty components. The final extracts showed chemical profiles similar to that of a previous clinical RCE. Biological standardization revealed that the enriched ARCE-d/h extracts produced the strongest estrogenic activity in ERα positive endometrial cells (Ishikawa cells), followed by the precursor ARCE. The glycoside-rich ERCE showed no estrogenic activity. The estrogenicity of ARCE-d/h was similar to that of the clinical RCE. The lower potency of the ARCE compared to the prior clinical RCE indicated that substantial amounts of fatty acids/matter likely reduce the estrogenicity of crude hydrolyzed preparations. The in vitro dynamic residual complexity of the conversion of biochanin A to genistein was evaluated by LC-MS-MS. The outcomes help advance translational research with red clover and other (iso)flavone-rich botanicals by inspiring the preparation of (iso)flavone aglycone-enriched extracts for the exploration of new in vitro and ex vivo bioactivities that are unachievable with genuine, glycoside-containing extracts.

Accurate and Precise External Calibration Enhances the Versatility of Quantitative NMR (qNMR)

Quantitative ¹H nuclear magnetic resonance (qHNMR) is a highly regarded analytical methodology for purity determination as it balances metrological rigor, practicality, and versatility well. While ideal for intrinsically mass-limited samples, external calibration (EC) qHNMR is overshadowed by the prevalence of internal calibration and perceived rather than real practical limitations. To overcome this hurdle, this study applied the principle of reciprocity, certified reference materials (caffeine as analyte, dimethyl sulfone as calibrant), and a systematic evaluation of data acquisition workflows to extract key factors for the achievement of accuracy and precision in EC-qHNMR. Automatic calibration of the 90° pulse width (90 PW) formed the foundation for the principle of reciprocity and used optimized nutation experiments, showing good agreement with values derived from manual high-precision measurement of 360 PW. Employing the automatic 90 PW calibration, EC-qHNMR with automatic vs manual tuning and matching (T&M) yielded the certified purity value within 1% error. The timing of T&M (before vs after shimming) turned out to be critically important: sufficient time is required to achieve full-temperature equilibrium relative to thermal gradients in the air inside the probe and the sample. Achievable accuracy across different NMR solvents varies with differences in thermal conductivity and leads to 2% or greater errors. With matching solvents, the demonstrated accuracy of ∼1.0% underscores the feasibility of EC-qHNMR as a highly practical research tool.

Quantitative Chemical Profiling of Commercial Glyceride Excipients via 1H NMR Spectroscopy

Glycerides are the main components of oils, and fats, used in formulated products in the food and cosmetic industry as well as in the pharmaceutical product industry. However, there is limited literature available on the analysis of the chemical composition of glycerides. The lack of a suitable analytical method for complete chemical profiling of glycerides is one of the bottlenecks in understanding and controlling the change in chemical composition during processing, formulation, and storage. Thus, the aim of the present study is to develop a calibration-free quantitative proton nuclear magnetic resonance (qHNMR) method for the simultaneous quantification of different components of glycerides. The qHNMR method was developed for the quantification of mono-, di-, and triglycerides; their positional isomers; free fatty acids; and glycerol content. The accuracy, precision, and robustness of the developed method were evaluated and were found suitable for the quantitative analysis of five batches of marketed excipient. The study demonstrates the potential of qHNMR method for the quantification of different components of glycerides in various marketed products. The method has the ability to identify the variability of glycerides among different batches and suppliers in terms of chemical composition and also to discern the changes during storage.

A validated 1H-NMR method for quantitative analysis of DOTAP lipid in nanoliposomes containing soluble Leishmania antigen

Leishmaniasis is a serious health problem that needs a suitable vaccine delivery system to control the disease. Cationic lipids such as 1, 2-dioleoyl-3-trimethylammonium-propane (DOTAP) have been widely used in nanoliposomes' formulation to deliver antigen and adjuvant at the same time to induce protection against Leishmaniasis. Therefore, it is necessary to accurately quantify DOTAP concentration in the formulation and biological materials. Due to the poor UV absorbance of DOTAP, the use of the conventional HPLC-UV method was impossible. Currently, an evaporative light scattering detector (ELSD) or MS/MS detector in conjunction with HPLC is used to quantify DOTAP. These methods have several disadvantages, including time- consuming during extraction procedure and decrease or/and even remove some components of the formulation. According to the advantages of the quantitative ¹H Nuclear Magnetic Resonance (¹H-NMR) spectroscopic method, a free extraction approach was developed to the assay of DOTAP in nanoliposomes containing Leishmania antigens. This method was carried out based on the relative ratio of signal integration of DOTAP [CH₂ (CH₂-CH = CH-CH₂)] in δ 2 ppm to a definite amount of an internal standard called dimethyl sulfone (DMSO₂). The q¹H-NMR method showed good precision (intra-day RSD = 1.8 % and inter-day RSD = 2.5 %), linearity (in the ranges of 1.3-7.8 mg. mL^-1 with correlation coefficients at 1), repeatability (RSD ≤ 2.39 %), and stability (RSD ≤ 2.32 %) for the quantification of the DOTAP without any extraction method. Considering all the experiments conducted in this study, NMR can be a feasible alternative to other traditional techniques for the simultaneous quantification of lipids in liposome formulations.

Differentiation of Actaea species by NMR metabolomics analysis

The ¹H NMR spectra of crude extracts from a total of 33 Actaea samples were acquired and analyzed for their species- and plant part-specific metabolomic characteristics by identifying fingerprint resonances via visual observation as well as a chemometric approach using principal component analysis (PCA). The main study subjects were the roots/rhizomes and aerial parts of three American species, Actaea racemosa (AR), Actaea podocarpa (AP) and Actaea cordifolia (AC). AP exhibited an already visually distinct chemical profile from those of the other two species. The species-characteristic resonances were identified as analytical chemotaxonomic markers. AR and AC exhibited visually similar ¹H NMR spectral profiles that required statistical analysis for differentiation. Several characteristic peaks and peak patterns were identified for each group of samples. Together with the three American Actaea species, the characteristics of the ¹H NMR spectra of Asian species are also discussed. A statistical analysis method using PCA was employed to provide the metabolomic profile for visually minor but analytically significant chemotaxonomic differences. PCA scores allowed differentiation between the three American Actaea species, as well as the ability to differentiate between the various plant parts (aboveground vs. roots/rhizomes).

Classification of Flavonoid Metabolomes via Data Mining and Quantification of Hydroxyl NMR Signals

Utilizing the distinct HMBC cross-peak patterns of lower-field range (LFR; 11.80-14.20 ppm) hydroxyl singlets, presented NMR methodology characterizes flavonoid metabolomes both qualitatively and quantitatively. It enables simultaneous classification of the structural types of 5-OH flavonoids and biogenetically related 2'-OH chalcones, as well as quantification of individual metabolites from 1H NMR spectra, even in complex mixtures. Initially, metabolite-specific LFR 1D 1H and 2D HMBC patterns were established via literature mining and experimental data interpretation, demonstrating that LFR HMBC patterns encode the different structural types of 5-OH flavonoids/2'-OH chalcones. Taking advantage of the simplistic multiplicity of the H,H-uncoupled LFR 5-/2'-OH singlets, individual metabolites could subsequently be quantified by peak fitting quantitative 1H NMR (PF-qHNMR). Metabolomic analysis of enriched fractions from three medicinal licorice (Glycyrrhiza) species established proof-of-concept for distinguishing three major structural types and eight subtypes in biomedical applications. The method identified 15 G. uralensis (GU) phenols from the six possible subtypes of 5,7-diOH (iso)flav(an)ones with 6-, 8-, and nonprenyl substitution, including the new 6-prenyl-licoisoflavanone (1) and two previously unknown compounds (4 and 7). Relative (100%) qNMR established quantitative metabolome patterns suitable for species discrimination and plant metabolite studies. Absolute qNMR with combined external and internal (solvent) calibration (ECIC) identified and quantified 158 GU metabolites. HMBC-supported qHNMR analysis of flavonoid metabolomes ("flavonomics") empowers the exploration of structure-abundance-activity relationships of designated bioactivity. Its ability to identify and quantify numerous metabolites simultaneously and without identical reference materials opens new avenues for natural product discovery and botanical quality control and can be adopted to other flavonoid- and chalcone-containing taxa.

1 H-NMR and GC for detection of adulteration in commercial essential oils of Cymbopogon ssp

INTRODUCTION

Essential oils of Cymbopogon nardus and C. winterianus have fungicidal, bactericidal, and insect repellent activities. In addition, they are components of fragrances, cosmetics, and household products. The growing demand for essential oils has intensified adulteration practices of such products.

OBJECTIVES

To evaluate the authenticity and quality of citronella commercial essential oils based on chemical composition [by gas chromatography mass spectrometry (GC-MS)] and the contents of its major constituents [by ¹ H-NMR, and gas chromatography with a flame ionisation detector using internal standardisation (GC-IS)].

MATERIALS AND METHODS

The chemical composition of essential oil was determined by GC-MS. Major components were quantified by ¹ H-NMR and the results compared to those obtained by GC-IS.

RESULTS

The adulteration of oils was verified by GC and ¹ H-NMR. In the pure oils, the results obtained by ¹ H-NMR were similar to those obtained by GC-IS for most of the oils. However, in adulterated oils, signal overlap prevented the quantification of citronellol and geraniol by NMR. Importantly, due to dilution with dipropylene glycol it was not possible to quantify citronellal using ¹ H-NMR. However, for both pure and adulterated oils, GC-IS method proved successful in quantifying notable constituents.

CONCLUSION

All the methods used proved efficient in detecting adulteration. However, whilst GC-IS provided quantification of constituents of interest, both in pure and adulterated oils, their quantification by NMR was only possible in non-adulterated samples. None of the oils evaluated presented a composition within the threshold established by British Pharmacopoeia quality standards.

Purity determination of a new antifungal drug candidate using quantitative 1 H NMR spectroscopy: Method validation and comparison of calibration approaches

Quantitative nuclear magnetic resonance (qNMR) is an analytical technique that offers numerous advantages in pharmaceutical applications including minimum sample preparation and rapid data collection times with no need for response factor corrections, being a powerful tool for assaying drug content in both drug discovery and early drug development. In the present work, we have applied qNMR, using both the internal standard and the electronic reference to access in vivo concentrations 2 calibration methods, to assess the purity of RI76, a novel antifungal drug candidate. NMR acquisition and processing parameters were optimized in order to obtain spectra with intense, well-resolved signals of completely relaxed nuclei. The analytical method was validated following current guidelines, demonstrating selectivity, linearity, accuracy, precision, and robustness. The calibration approaches were statistically compared, and no significant difference was observed when comparing the obtained results and their dispersion in terms of relative standard deviation. The proposed qNMR method may, therefore, be used for both qualitative and quantitative assessments of RI76 in early drug development and for characterization of this compound.

NMR based quantitation of cycloartane triterpenes in black cohosh extracts

The cycloartane triterpene content in the roots/rhizomes (RR) and aerial parts (PX) of Actaea racemosa (AR), A. podocarpa (AP), and A. cordifolia (AC) have been investigated by quantitative ¹H NMR (qHNMR). Thereby, it was demonstrated that qHNMR represents a powerful methodology for the analysis of crude plant extracts as it does not rely on the rarely available identical reference triterpenes. Specifically, the presence of the characteristic C-19 cyclopropane (exo/endo) hydrogen signals made it possible to quantify the less common/not ubiquitously present group of cycloartane triterpenes, directly in extracts. As an example, ARPX and ARRR were shown to contain, 3.8-20.8% ± 8.2% and 7.2-19.3% ± 4.0% of cycloartane triterpenes, respectively. The cycloartane concentration in ACPX and ACRR was 7.5-8.7% ± 0.8% and 13.9-28.5% ± 7.3%, respectively, based on the weight of the extract. AP was shown to contain notably lower amounts of the cycloartane triterpenes as compared to AR and AC in the roots/rhizomes. The content for APPX and APRR was only 2.1-3.3% ± 0.7% and 1.1-4.0% ± 1.5%, respectively. In addition, an example is presented for the identification of specific cycloartanes as marker compounds for AR within crude extracts based on the same qHNMR spectra and 2D NMR methods.

Studying Mass Balance and the Stability of (Z)-Ligustilide from Angelica sinensis Helps to Bridge a Botanical Instability-Bioactivity Chasm

Numerous reports assigning (Z)-ligustilide (1) the role of a major bioactive principle in Apiaceae botanicals are called into question by the recurrent demonstrations of 1 being an unstable, rapidly degrading compound, ultimately leading to dynamic residual complexity. While Angelica sinensis is recognized for its therapeutic value in (peri-)menopausal symptom management, its purported active principle, 1, represents a typical example of the instability-bioactivity chasm of botanicals. To help bridge the gap, this study used both the essential oil and purified 1 obtained from A. sinensis to investigate the factors that influence the chemical transformation of 1, the products formed, and the rationale for monitoring 1 in natural product preparations. Countercurrent separation was used to purify 1 from a supercritical fluid extract of A. sinensis, achieving 93.4% purity in a single step. Subsequent purification by preparative HPLC afforded 1 with a 98.0% purity. Providing a mass balance setting, we monitored chemical changes occurring to highly purified 1 under various conditions and at different time points, in sealed NMR tubes by quantitative 1H NMR (qHNMR). The nondestructive nature of NMR enabled a comprehensive assessment of degradation products. Moreover, in being a mole-based determination, the total intensity (integral) of all NMR signals intrinsically represents the theoretical mass balance within the sample solution. The results demonstrated that 1 is most stable while within the original plant material. Exposure to light had a profound impact on the chemical transformation of 1, leading to the formation of ligustilide dimers and trimers, as verified by both NMR and LC-HRMS studies. Moreover, the results shown for 1, augmented by other recent outcomes, have serious implications for the meaningful biological evaluation of NPs that exhibit instability/reactivity, while having a plethora of "promising" bioactivities reported in the literature and being frequently associated with unsubstantiated health claims.

Dynamics of the isoflavone metabolome of traditional preparations of Trifolium pratense L

ETHNOPHARMACOLOGICAL RELEVANCE

The flowering tops of Trifolium pratense L., popularly known as red clover, are used in ethnic Western and Traditional Chinese medicine, in a variety of preparations, including infusions, decoctions and tinctures. Red clover has been reported to be helpful for treatment of menopausal symptoms, premenstrual syndrome, mastalgia, high cholesterol, and other conditions.

AIMS OF THE STUDY

The aims were to compare the chemical dynamics between traditional preparations of infusions, decoctions, and tinctures, as well as to identify the chemical variability over time in a traditional red clover tincture. For this purpose, eight isoflavone aglycones as well as two glucosides, ononin and sissotrin, were used as marker compounds.

MATERIALS AND METHODS

Quantitative NMR (qHNMR), LC-MS-MS, and UHPLC-UV methods were used to identify and quantitate the major phenolic compounds found within each extract.

RESULTS

Infusions, decoctions and tinctures were shown to produce different chemical profiles. Biochanin A and formononetin were identified and quantified in infusion, decoction, and tinctures of red clover. Both infusion and decoction showed higher concentrations of isoflavonoid glucosides, such as ononin and sissotrin, than 45% ethanolic tinctures. Dynamic chemical variability ("dynamic residual complexity") of the red clover tincture was observed over time (one-month), with biochanin A and formononetin reaching peak concentrations at around six days.

CONCLUSIONS

Insight was gained into why different formulation methods (infusions, decoctions, and tinctures) are traditionally used to treat different health conditions. Moreover, the outcomes show that tinctures, taken over a period of time, are dynamic medicinal formulations that allow for time-controlled release of bioactive compounds.

Preparation of DESIGNER extracts of red clover (Trifolium pratense L.) by centrifugal partition chromatography

Starting with an isoflavone-rich red clover extract (RCE), this study expands on the DESIGNER approach to Deplete and Enrich Select Ingredients to Generate Normalized Extract Resources using countercurrent separation (CCS) methodology. A hydrostatic CCS (also known as centrifugal partition chromatography, CPC) technique was used to enrich and deplete selected bioactive isoflavones of RCE extracts. In order to efficiently prepare large enough DESIGNER extracts from RCE for biological testing including in vivo assays, it was necessary to choose a balance between resolution and a loading capacity of at least 1 g per separation for the selected solvent system (SS). Adding 3 mL of DMSO to the sample containing equal amounts of upper and lower phases of hexanes-ethyl acetate-methanol-water (HEMWat 5.5/4.5/5/5, v/v) allowed 1 g of RCE to be dissolved in the sample without disrupting the chromatographic resolution of the target isoflavones. CPC experiments using other solubility modifiers, acetone and acetonitrile indicated that these modifiers increase solubility significantly, even better than DMSO, but the separation of target compounds was sufficiently disturbed to be unacceptable for producing the desired DESIGNER extracts. The preparation of DESIGNER extracts was achieved with two sequential CPC separations. The first produced a biochanin A enriched fraction (93.60% w/w) with only small amounts of other isoflavones: 2.30% w/w prunetin, 1.17% w/w formononetin, and 0.12% w/w irilone. Gravimetric investigations of this step demonstrated the high efficiency of CCS technology for full and unbiased sample recovery, confirmed experimentally to be 99.80%. A formononetin enriched fraction from this first separation was re-chromatographed on a more polar HEMWat (4/6/4/6, v/v) SS to produce a formononetin enriched DESIGNER fraction of 94.70% w/w purity. The presence of the minor (iso)flavonoids: 3.16% w/w pseudobaptigenin, 0.39% w/w kaempferol, and 0.31% w/w genistein was also monitored in these fractions. Chromatographic fractions, combined fractions, and DESIGNER extracts were analyzed with quantitative ¹H NMR (qHNMR) spectroscopy which provided purity information, quantitation, and structural identification of the components.

Quantitative NMR analysis of L-Dopa in seeds from two varieties of Mucuna pruriens

INTRODUCTION

L-Dopa, a key neurotransmitter used to treat neural disorders such as Parkinson's disease, is found in the seeds of the genus Mucuna at a sufficient concentration for possible commercial use.

OBJECTIVE

To develop a simple and reliable method to extract L-Dopa from M. pruriens seeds in an aqueous medium and then quantitate this compound using a ¹ H qNMR method (internal standard); and also to evaluate the accuracy and reproducibility of this method with an NMR calibration curve.

METHODOLOGY

The extraction method of L-Dopa from M. pruriens was optimized. The quantitation with single point quantitative NMR (qNMR) and NMR calibration curve was based on the resonance properties of the main functional groups of the L-Dopa molecule, in particular the signals of the three aromatic protons, which were compared with the signal of an internal standard such as syringic acid. The accuracy (precision and trueness) and reproducibility of both NMR techniques were evaluated.

RESULTS

The methods of single point qNMR and NMR calibration curve, applied to the seeds of two M. pruriens varieties, gave very similar L-Dopa contents: 3.0-3.2% and 3.0-3.1%, respectively.

CONCLUSION

The statistical analysis confirmed the accuracy and reproducibility of this single point qNMR method (internal standard) for determining L-Dopa, as well as other commercial preparations of this species, without performing an NMR calibration curve.

Pushing the frontiers: boron-11 NMR as a method for quantitative boron analysis and its application to determine boric acid in commercial biocides

Quantitative boron-11 NMR (11B qNMR) spectroscopy has been introduced for the first time as a method to determine boric acid content in commercial biocides. Validation of the method affords a limit of detection of 0.02% w/w and a limit of quantification of 0.04% w/w, which are low enough to determine boric acid in commercial biocides. Other figures of merit such as linearity (R2 > 0.99), recovery (93.6%-106.2%), intra- and inter-day precision (from 0.7 to 2.0%), uncertainty (3.7 to 4.4%) and matrix effects were also evaluated. This method was successfully applied to determine boric acid in five different commercial biocides in a wide range of concentrations (<0.05 to 10% w/w) providing excellent results when they were compared with those obtained using inductively coupled plasma-mass spectrometry (ICP-MS). The suitability of this method for a fast and reliable quantification of boric acid in commercial biocide preparations has been demonstrated. The absence of the matrix effect allows the application of this validated method for the determination of boric acid in other matrices of diverse composition.

A validated 1H qNMR method for direct and simultaneous quantification of esculin, fraxin and (-)-epicatechin in Hippocastani cortex

A fast and precise qNMR method was developed for quantification of major bioactive constituents in the bark of horse chestnut and dry extracts prepared thereof. The method was optimised using 600 MHz spectrometer, and the final acquisition parameters (90°-pulse, acquisition time - 3.0 s, relaxation delay - 27 s, number of transients - 16) allowed for performing of quantitative experiments in under 15 min. The contents of three analytes were determined using specific ¹H resonances at δ7.45 ppm for esculin, δ5.00 ppm for fraxin, and δ5.94 ppm for (-)-epicatechin. The validation showed good precision (RSD < 1.5%) and accuracy (95-103%), and adequate sensitivity (LODs in the range of 3.3-5.9 µg) of the measurements. The determined levels in commercial samples of Hippocastani cortex were in the range of 25.89-38.94 mg/g dry weight (dw) of the bark for esculin, 12.58-17.13 mg/g dw for fraxin and 10.42-13.96 mg/g dw for (-)-epicatechin, and in the dry extracts prepared thereof 97.02-143.51 mg/g, 45.78-58.92 mg/g and 28.07-46.29 mg/g, respectively. The obtained results were cross-validated by a HPLC-PDA method with the use of a fused-core column, and no statistical differences were found between the results obtained by both methodologies, but with the advantage of higher precision of the qNMR assay. The relevant variability in quantitative composition of the commercial samples emphasise the need to introduce quality control studies in production of preparations containing horse chestnut bark and the developed method was proved suitable for this purpose.

Practical guide for selection of 1 H qNMR acquisition and processing parameters confirmed by automated spectra evaluation

In our recent paper, a new technique for automated spectra integration and quality control of the acquired results in qNMR was developed and validated (Monakhova & Diehl, Magn. Res. Chem. 2017, doi: 10.1002/mrc.4591). The present study is focused on the influence of acquisition and postacquisition parameters on the developed automated routine in particular, and on the quantitative NMR (qNMR) results in general, which has not been undertaken previously in a systematic and automated manner. Results are presented for a number of model mixtures and authentic pharmaceutical products measured on 500- and 600-MHz NMR spectrometers. The influence of the most important acquisition (spectral width, transmitter [frequency] offset, number of scans, and time domain) and processing (size of real spectrum, deconvolution, Gaussian window multiplication, and line broadening) parameters for qNMR was automatically investigated. Moderate modification of the majority of the investigated parameters from default instrument settings within evaluated ranges does not significantly affect the trueness and precision of the qNMR. Lite Gaussian window multiplication resulted in accuracy improvement of the qNMR output and is recommended for routine measurements. In general, given that the acquisition and processing parameters were selected based on the presented guidelines, automated qNMR analysis can be employed for reproducible high-precision concentration measurements in practice.

Evolution of Quantitative Measures in NMR: Quantum Mechanical qHNMR Advances Chemical Standardization of a Red Clover (Trifolium pratense) Extract

Chemical standardization, along with morphological and DNA analysis ensures the authenticity and advances the integrity evaluation of botanical preparations. Achievement of a more comprehensive, metabolomic standardization requires simultaneous quantitation of multiple marker compounds. Employing quantitative 1H NMR (qHNMR), this study determined the total isoflavone content (TIfCo; 34.5-36.5% w/w) via multimarker standardization and assessed the stability of a 10-year-old isoflavone-enriched red clover extract (RCE). Eleven markers (nine isoflavones, two flavonols) were targeted simultaneously, and outcomes were compared with LC-based standardization. Two advanced quantitative measures in qHNMR were applied to derive quantities from complex and/or overlapping resonances: a quantum mechanical (QM) method (QM-qHNMR) that employs 1H iterative full spin analysis, and a non-QM method that uses linear peak fitting algorithms (PF-qHNMR). A 10 min UHPLC-UV method provided auxiliary orthogonal quantitation. This is the first systematic evaluation of QM and non-QM deconvolution as qHNMR quantitation measures. It demonstrates that QM-qHNMR can account successfully for the complexity of 1H NMR spectra of individual analytes and how QM-qHNMR can be built for mixtures such as botanical extracts. The contents of the main bioactive markers were in good agreement with earlier HPLC-UV results, demonstrating the chemical stability of the RCE. QM-qHNMR advances chemical standardization by its inherent QM accuracy and the use of universal calibrants, avoiding the impractical need for identical reference materials.

Cycloartane Triterpenes from the Aerial Parts of Actaea racemosa

Investigating the phytochemical equivalence of the aerial parts of Actaea racemosa (syn. Cimicifuga racemosa) relative to the widely used roots/rhizomes, this study provides a perspective for the potential use of renewable ("green") plant parts as a source of black cohosh botanical preparations. In addition to the characterization of Nω-methylserotonin as one representative marker of the Actaea alkaloids, nine cycloartane triterpenes were isolated and characterized, including the two new triterpene glycosides (1S,15R)-1,15,25-trihydroxy-3-O-β-d-xylopyranosyl-acta-(16S,23R,24R)-16,23;16,24-binoxoside (1) and 3-O-α-l-arabinopyranosyl-(1S,24R)-1,24,25-trihydroxy-15-oxo-acta-(16R,23R)-16,23-monoxoside (2). Their structures were elucidated by spectroscopic data interpretation. The relative configuration of 1 was deduced by (1)H iterative full-spin analysis (HiFSA), making it the first example of the complete analysis of the complex (1)H NMR spectrum of a triterpene glycoside. In addition to the new compounds 1 and 2, the aerial plant parts were shown to contain the previously known binoxosides 3, 4, 6, and 7, the monoxoside 8, and the binoxols 5 and 9. Overall, the metabolome of the aerial plant parts consists of a variety of Actaea triterpenes, similar to those found in roots/rhizomes, a tendency toward C-1 and C-7 hydroxylation of the cycloartanol skeleton, a greater abundance of aglycones, and the presence of comparable amounts of Nω-methylserotonin.

Importance of purity evaluation and the potential of quantitative ¹H NMR as a purity assay

In any biomedical and chemical context, a truthful description of chemical constitution requires coverage of both structure and purity. This qualification affects all drug molecules, regardless of development stage (early discovery to approved drug) and source (natural product or synthetic). Purity assessment is particularly critical in discovery programs and whenever chemistry is linked with biological and/or therapeutic outcome. Compared with chromatography and elemental analysis, quantitative NMR (qNMR) uses nearly universal detection and provides a versatile and orthogonal means of purity evaluation. Absolute qNMR with flexible calibration captures analytes that frequently escape detection (water, sorbents). Widely accepted structural NMR workflows require minimal or no adjustments to become practical ¹H qNMR (qHNMR) procedures with simultaneous qualitative and (absolute) quantitative capability. This study reviews underlying concepts, provides a framework for standard qHNMR purity assays, and shows how adequate accuracy and precision are achieved for the intended use of the material.

Species-specific Standardisation of Licorice by Metabolomic Profiling of Flavanones and Chalcones

INTRODUCTION

Major phenolics from licorice roots (Glycyrrhiza sp.) are glycosides of the flavanone liquiritigenin (F) and its 2′-hydroxychalcone isomer, isoliquiritigenin (C). As the F and C contents fluctuate between batches of licorice, both quality control and standardisation of its preparations become complex tasks.

OBJECTIVE

To characterise the F and C metabolome in extracts from Glycyrrhiza glabra L. and Glycyrrhiza uralensis Fisch. ex DC. by addressing their composition in major F–C pairs and defining the total F:C proportion.

MATERIAL AND METHODS

Three types of extracts from DNA-authenticated samples were analysed by a validated UHPLC/UV method to quantify major F and C glycosides. Each extract was characterised by the identity of major F–C pairs and the proportion of Fs among all quantified Fs:Cs.

RESULTS

The F and C compositions and proportions were found to be constant for all extracts from a Glycyrrhiza species. All G. uralensis extracts contained up to 2.5 more Fs than G. glabra extracts. Major F–C pairs were B-ring glycosidated in G. uralensis, and A-/B-ring apiosyl-glucosidated in the G. glabra extracts. The F:C proportion was found to be linked to the glycosidation site: the more B-ring F-C glycosides were present, the higher was the final F:C proportion in the extract. These results enable the chemical differentiation of extracts from G. uralensis and G. glabra, which are characterised by total F:C proportions of 8.37:1.63 and 7.18:2.82, respectively.

CONCLUSION

Extracts from G. glabra and G. uralensis can be differentiated by their respective F and C compositions and proportions, which are both useful for further standardisation of licorice botanicals.