Protein folding kinetics by combined use of rapid mixing techniques and NMR observation of individual amide protons

DMSO-Quenched H/D-Exchange 2D NMR Spectroscopy and Its Applications in Protein Science

Hydrogen/deuterium (H/D) exchange combined with two-dimensional (2D) NMR spectroscopy has been widely used for studying the structure, stability, and dynamics of proteins. When we apply the H/D-exchange method to investigate non-native states of proteins such as equilibrium and kinetic folding intermediates, H/D-exchange quenching techniques are indispensable, because the exchange reaction is usually too fast to follow by 2D NMR. In this article, we will describe the dimethylsulfoxide (DMSO)-quenched H/D-exchange method and its applications in protein science. In this method, the H/D-exchange buffer is replaced by an aprotic DMSO solution, which quenches the exchange reaction. We have improved the DMSO-quenched method by using spin desalting columns, which are used for medium exchange from the H/D-exchange buffer to the DMSO solution. This improvement has allowed us to monitor the H/D exchange of proteins at a high concentration of salts or denaturants. We describe methodological details of the improved DMSO-quenched method and present a case study using the improved method on the H/D-exchange behavior of unfolded human ubiquitin in 6 M guanidinium chloride.

The anatomy of unfolding of Yfh1 is revealed by site-specific fold stability analysis measured by 2D NMR spectroscopy

Most techniques allow detection of protein unfolding either by following the behaviour of single reporters or as an averaged all-or-none process. We recently added 2D NMR spectroscopy to the well-established techniques able to obtain information on the process of unfolding using resonances of residues in the hydrophobic core of a protein. Here, we questioned whether an analysis of the individual stability curves from each resonance could provide additional site-specific information. We used the Yfh1 protein that has the unique feature to undergo both cold and heat denaturation at temperatures above water freezing at low ionic strength. We show that stability curves inconsistent with the average NMR curve from hydrophobic core residues mainly comprise exposed outliers that do nevertheless provide precious information. By monitoring both cold and heat denaturation of individual residues we gain knowledge on the process of cold denaturation and convincingly demonstrate that the two unfolding processes are intrinsically different.

Complex Folding Landscape of Apomyoglobin at Acidic pH Revealed by Ultrafast Kinetic Analysis of Core Mutants

Under mildly acidic conditions (pH 4-4.5) apomyoglobin (apoMb) adopts a partially structured equilibrium state ( M-state) that structurally resembles a kinetic intermediate encountered at a late stage of folding to the native structure at neutral pH. We have previously reported that the M-state is formed rapidly (<1 ms) via a multistate process and thus offers a unique opportunity for exploring early stages of folding by both experimental and computational techniques. In order to gain structural insight into intermediates and barriers at the residue level, we studied the folding/unfolding kinetics of 12 apoMb mutants at pH 4.2 using fluorescence-detected ultrafast mixing techniques. Global analysis of the submillisecond folding/unfolding kinetics vs urea concentration for each variant, based on a sequential four-state mechanism ( U ⇔ I ⇔ L ⇔ M), allowed us to determine elementary rate constants and their dependence on urea concentration for most transitions. Comparison of the free energy diagrams constructed from the kinetic data of the mutants with that of wild-type apoMb yielded quantitative information on the effects of mutations on the free energy (ΔΔ G) of both intermediates and the first two kinetic barriers encountered during folding. Truncation of conserved aliphatic side chains on helices A, G, and H gives rise to a stepwise increase in ΔΔ G as the protein advances from U toward M, consistent with progressive stabilization of native-like contacts within the primary core of apoMb. Helix-helix contacts in the primary core contribute little to the first folding barrier ( U ⇔ I) and thus are not required for folding initiation but are critical for the stability of the late intermediate, L, and the M-state. Alanine substitution of hydrophobic residues at more peripheral helix-helix contact sites of the native structure, which are still absent or unstable in the M-state, shows both positive (destabilizing) and negative (stabilizing) ΔΔ G, indicating that non-native contacts are formed initially and weakened or lost as a result of subsequent structural rearrangement steps.

Measurement and Characterization of Hydrogen-Deuterium Exchange Chemistry Using Relaxation Dispersion NMR Spectroscopy

One-dimensional heteronuclear relaxation dispersion NMR spectroscopy at ¹³C natural abundance successfully characterized the dynamics of the hydrogen-deuterium exchange reaction occurring at the N^ε position in l-arginine by monitoring C^δ in varying amounts of D₂O. A small equilibrium isotope effect was observed and quantified, corresponding to ΔG = -0.14 kcal mol^-1. A bimolecular rate constant of k_D = 5.1 × 10⁹ s^-1 M^-1 was determined from the pH*-dependence of k_ex (where pH* is the direct electrode reading of pH in 10% D₂O and k_ex is the nuclear spin exchange rate constant), consistent with diffusion-controlled kinetics. The measurement of ΔG serves to bridge the millisecond time scale lifetimes of the detectable positively charged arginine species with the nanosecond time scale lifetime of the nonobservable low-populated neutral arginine intermediate species, thus allowing for characterization of the equilibrium lifetimes of the various arginine species in solution as a function of fractional solvent deuterium content. Despite the system being in fast exchange on the chemical shift time scale, the magnitude of the secondary isotope shift due to the exchange reaction at N^ε was accurately measured to be 0.12 ppm directly from curve-fitting D₂O-dependent dispersion data collected at a single static field strength. These results indicate that relaxation dispersion NMR spectroscopy is a robust and general method for studying base-catalyzed hydrogen-deuterium exchange chemistry at equilibrium.

Ultrafast structural molecular dynamics investigated with 2D infrared spectroscopy methods

Ultrafast, multi-dimensional infrared (IR) spectroscopy has been advanced in recent years to a versatile analytical tool with a broad range of applications to elucidate molecular structure on ultrafast timescales, and it can be used for samples in a many different environments. Following a short and general introduction on the benefits of 2D IR spectroscopy, the first part of this chapter contains a brief discussion on basic descriptions and conceptual considerations of 2D IR spectroscopy. Outstanding classical applications of 2D IR are used afterwards to highlight the strengths and basic applicability of the method. This includes the identification of vibrational coupling in molecules, characterization of spectral diffusion dynamics, chemical exchange of chemical bond formation and breaking, as well as dynamics of intra- and intermolecular energy transfer for molecules in bulk solution and thin films. In the second part, several important, recently developed variants and new applications of 2D IR spectroscopy are introduced. These methods focus on (i) applications to molecules under two- and three-dimensional confinement, (ii) the combination of 2D IR with electrochemistry, (iii) ultrafast 2D IR in conjunction with diffraction-limited microscopy, (iv) several variants of non-equilibrium 2D IR spectroscopy such as transient 2D IR and 3D IR, and (v) extensions of the pump and probe spectral regions for multi-dimensional vibrational spectroscopy towards mixed vibrational-electronic spectroscopies. In light of these examples, the important open scientific and conceptual questions with regard to intra- and intermolecular dynamics are highlighted. Such questions can be tackled with the existing arsenal of experimental variants of 2D IR spectroscopy to promote the understanding of fundamentally new aspects in chemistry, biology and materials science. The final part of the chapter introduces several concepts of currently performed technical developments, which aim at exploiting 2D IR spectroscopy as an analytical tool. Such developments embrace the combination of 2D IR spectroscopy and plasmonic spectroscopy for ultrasensitive analytics, merging 2D IR spectroscopy with ultra-high-resolution microscopy (nanoscopy), future variants of transient 2D IR methods, or 2D IR in conjunction with microfluidics. It is expected that these techniques will allow for groundbreaking research in many new areas of natural sciences.

Early Folding Events, Local Interactions, and Conservation of Protein Backbone Rigidity

Protein folding is in its early stages largely determined by the protein sequence and complex local interactions between amino acids, resulting in lower energy conformations that provide the context for further folding into the native state. We compiled a comprehensive data set of early folding residues based on pulsed labeling hydrogen deuterium exchange experiments. These early folding residues have corresponding higher backbone rigidity as predicted by DynaMine from sequence, an effect also present when accounting for the secondary structures in the folded protein. We then show that the amino acids involved in early folding events are not more conserved than others, but rather, early folding fragments and the secondary structure elements they are part of show a clear trend toward conserving a rigid backbone. We therefore propose that backbone rigidity is a fundamental physical feature conserved by proteins that can provide important insights into their folding mechanisms and stability.

Untangling the Influence of a Protein Knot on Folding

Entanglement and knots occur across all aspects of the physical world. Despite the common belief that knots are too complicated for incorporation into proteins, knots have been identified in the native fold of a growing number of proteins. The discovery of proteins with this unique backbone characteristic has challenged the preconceptions about the complexity of biological structures, as well as current folding theories. Given the intricacies of the knotted geometry, the interplay between a protein's fold, structure, and function is of particular interest. Interestingly, for most of these proteins, the knotted region appears critical both in folding and function, although full understanding of these contributions is still incomplete. Here, we experimentally reveal the impact of the knot on the landscape, the origin of the bistable nature of the knotted protein, and broaden the view of knot formation as uniquely decoupled from folding.

Quenched Hydrogen Exchange NMR of Amyloid Fibrils

Amyloid fibrils are associated with a number of human diseases. These aggregatively misfolded intermolecular β-sheet assemblies constitute some of the most challenging targets in structural biology because to their complexity, size, and insolubility. Here, protocols and controls are described for experiments designed to study hydrogen-bonding in amyloid fibrils indirectly, by transferring information about amide proton occupancy in the fibrils to the dimethyl sulfoxide-denatured state. Since the denatured state is amenable to solution NMR spectroscopy, the method can provide residue-level-resolution data on hydrogen exchange for the monomers that make up the fibrils.

Start2Fold: a database of hydrogen/deuterium exchange data on protein folding and stability

Proteins fulfil a wide range of tasks in cells; understanding how they fold into complex three-dimensional (3D) structures and how these structures remain stable while retaining sufficient dynamics for functionality is essential for the interpretation of overall protein behaviour. Since the 1950's, solvent exchange-based methods have been the most powerful experimental means to obtain information on the folding and stability of proteins. Considerable expertise and care were required to obtain the resulting datasets, which, despite their importance and intrinsic value, have never been collected, curated and classified. Start2Fold is an openly accessible database (http://start2fold.eu) of carefully curated hydrogen/deuterium exchange (HDX) data extracted from the literature that is open for new submissions from the community. The database entries contain (i) information on the proteins investigated and the underlying experimental procedures and (ii) the classification of the residues based on their exchange protection levels, also allowing for the instant visualization of the relevant residue groups on the 3D structures of the corresponding proteins. By providing a clear hierarchical framework for the easy sharing, comparison and (re-)interpretation of HDX data, Start2Fold intends to promote a better understanding of how the protein sequence encodes folding and structure as well as the development of new computational methods predicting protein folding and stability.

Analytical Aspects of Hydrogen Exchange Mass Spectrometry

This article reviews the analytical aspects of measuring hydrogen exchange by mass spectrometry (HX MS). We describe the nature of analytical selectivity in hydrogen exchange, then review the analytical tools required to accomplish fragmentation, separation, and the mass spectrometry measurements under restrictive exchange quench conditions. In contrast to analytical quantitation that relies on measurements of peak intensity or area, quantitation in HX MS depends on measuring a mass change with respect to an undeuterated or deuterated control, resulting in a value between zero and the maximum amount of deuterium that can be incorporated. Reliable quantitation is a function of experimental fidelity and to achieve high measurement reproducibility, a large number of experimental variables must be controlled during sample preparation and analysis. The method also reports on important qualitative aspects of the sample, including conformational heterogeneity and population dynamics.

Ultrafast hydrogen exchange reveals specific structural events during the initial stages of folding of cytochrome c

Many proteins undergo a sharp decrease in chain dimensions during early stages of folding, prior to the rate-limiting step in folding. However, it remains unclear whether compact states are the result of specific folding events or a general hydrophobic collapse of the poly peptide chain driven by the change in solvent conditions. To address this fundamental question, we extended the temporal resolution of NMR-detected H/D exchange labeling experiments into the microsecond regime by adopting a microfluidics approach. By observing the competition between H/D exchange and folding as a function of labeling pH, coupled with direct measurement of exchange rates in the unfolded state, we were able to monitor hydrogen-bond formation for over 50 individual backbone NH groups within the initial 140 microseconds of folding of horse cytochrome c. Clusters of solvent-shielded amide protons were observed in two α-helical segments in the C-terminal half of the protein, while the N-terminal helix remained largely unstructured, suggesting that proximity in the primary structure is a major factor in promoting helix formation and association at early stages of folding, while the entropically more costly long-range contacts between the N- and C-terminal helices are established only during later stages. Our findings clearly indicate that the initial chain condensation in cytochrome c is driven by specific interactions among a subset of α-helical segments rather than a general hydrophobic collapse.

Nonuniform chain collapse during early stages of staphylococcal nuclease folding detected by fluorescence resonance energy transfer and ultrarapid mixing methods

The development of tertiary structure during folding of staphylococcal nuclease (SNase) was studied by time-resolved fluorescence resonance energy transfer measured using continuous- and stopped-flow techniques. Variants of this two-domain protein containing intradomain and interdomain fluorescence donor/acceptor pairs (Trp and Cys-linked fluorophore or quencher) were prepared to probe the intradomain and interdomain structural evolution accompanying SNase folding. The intra-domain donor/acceptor pairs are within the β-barrel domain (Trp27/Cys64 and Trp27/Cys97) and the interdomain pair is between the α-helical domain and the β-barrel domain (Trp140/Cys64). Time-resolved energy transfer efficiency accompanying folding and unfolding at different urea concentrations was measured over a time range from 30 μs to ≈ 10 s. Information on average donor/acceptor distances at different stages of the folding process was obtained by using a quantitative kinetic modeling approach. The average distance for the donor/acceptor pairs in the β-barrel domain decreases to nearly native values whereas that of the interdomain donor/acceptor pairs remains unchanged in the earliest intermediate (<500 μs of refolding). This indicates a rapid nonuniform collapse resulting in an ensemble of heterogeneous conformations in which the central region of the β-barrel domain is well developed while the C-terminal α-helical domain remains disordered. The distance between Trp140 and Cys64 decreases to native values on the 100-ms time scale, indicating that the α-helical domain docks onto the preformed β-barrel at a late stage of the folding. In addition, the unfolded state is found to be more compact under native conditions, suggesting that changes in solvent conditions may induce a nonspecific hydrophobic collapse.

Stepwise protein folding at near amino acid resolution by hydrogen exchange and mass spectrometry

The kinetic folding of ribonuclease H was studied by hydrogen exchange (HX) pulse labeling with analysis by an advanced fragment separation mass spectrometry technology. The results show that folding proceeds through distinct intermediates in a stepwise pathway that sequentially incorporates cooperative native-like structural elements to build the native protein. Each step is seen as a concerted transition of one or more segments from an HX-unprotected to an HX-protected state. Deconvolution of the data to near amino acid resolution shows that each step corresponds to the folding of a secondary structural element of the native protein, termed a "foldon." Each folded segment is retained through subsequent steps of foldon addition, revealing a stepwise buildup of the native structure via a single dominant pathway. Analysis of the pertinent literature suggests that this model is consistent with experimental results for many proteins and some current theoretical results. Two biophysical principles appear to dictate this behavior. The principle of cooperativity determines the central role of native-like foldon units. An interaction principle termed "sequential stabilization" based on native-like interfoldon interactions orders the pathway.

Hydrogen exchange mass spectrometry: are we out of the quicksand?

Although the use of hydrogen exchange (HX) mass spectrometry (MS) to study proteins and protein conformation is now over 20 years old, the perception lingers that it still has "issues." Is this method, in fact, still in the quicksand with many remaining obstacles to overcome? We do not think so. This critical insight addresses the "issues" and explores several broad questions including, have the limitations of HX MS been surmounted and has HX MS achieved "indispensable" status in the pantheon of protein structural analysis tools.

Spatial proximity between the VPAC1 receptor and the amino terminus of agonist and antagonist peptides reveals distinct sites of interaction

Vasoactive intestinal peptide (VIP) plays a major role in pathophysiology. Our previous studies demonstrated that the VIP sequence 6-28 interacts with the N-terminal ectodomain (N-ted) of its receptor, VPAC1. Probes for VIP and receptor antagonist PG97-269 were synthesized with a photolabile residue/Bpa at various positions and used to explore spatial proximity with VPAC1. PG97-269 probes with Bpa at position 0, 6, and 24 behaved as high-affinity receptor antagonists (K(i)=12, 9, and 7 nM, respectively). Photolabeling experiments revealed that the [Bpa(0)]-VIP probe was in physical contact with VPAC1 Q(135), while [Bpa(0)]-PG97-269 was covalently bound to G(62) residue of N-ted, indicating different binding sites. In contrast, photolabeling with [Bpa(6)]- and [Bpa(24)]-PG97-269 showed that the distal domains of PG97-269 interacted with N-ted, as we previously showed for VIP. Substitution with alanine of the K(143), T(144), and T(147) residues located in the first transmembrane domain of VPAC1 induced a loss of receptor affinity (IC(50)=1035, 874, and 2070 nM, respectively), and pharmacological studies using VIP2-28 indicated that these three residues play an important role in VPAC1 interaction with the first histidine residue of VIP. These data demonstrate that VIP and PG97-269 bind to distinct domains of VPAC1.

Applications of micromixing technology

This review presents an application of micromixer technologies, which have driven a number of critical research trends over the past few decades, particularly for chemical and biological fields. Micromixer technologies in this review are categorized according to their applications: (1) chemical applications, including chemical synthesis, polymerization, and extraction; (2) biological applications, including DNA analysis, biological screening enzyme assays, protein folding; and (3) detection/analysis of chemical or biochemical content combined with NMR, FTIR, or Raman spectroscopies. In the chemical application, crystallization, extraction, polymerization, and organic synthesis have been reported, not only for laboratory studies, but also for industrial applications. Microscale techniques are used in chemical synthesis to develop microreactors. In clinical medicine and biological studies, microfluidic systems have been widely applied to the identification of biochemical products, diagnosis, drug discovery, and investigation of disease symptoms. The biological and biochemical applications also include enzyme assays, biological screening assays, cell lysis, protein folding, and biological analytical assays. Nondestructive analytical/detection methods have yielded a number of benefits to chemical and biochemical processes. In this chapter, we introduce analytical methods those are frequently integrated into micromixing technologies, such as NMR, FT-IR, and Raman spectroscopies. From the study of micromixers, we discovered that the Re number and mixing time depends on the specific application, and we clustered micromixers in various applications according to the Re number and mixing performance (mixing time). We expect that this clustering will be helpful in designing of micromixers for specific applications.

Folding trajectories of human dihydrofolate reductase inside the GroEL GroES chaperonin cavity and free in solution

The chaperonin GroEL binds non-native polypeptides in an open ring via hydrophobic contacts and then, after ATP and GroES binding to the same ring as polypeptide, mediates productive folding in the now hydrophilic, encapsulated cis chamber. The nature of the folding reaction in the cis cavity remains poorly understood. In particular, it is unclear whether polypeptides take the same route to the native state in this cavity as they do when folding spontaneously free in solution. Here, we have addressed this question by using NMR measurements of the time course of acquisition of amide proton exchange protection of human dihydrofolate reductase (DHFR) during folding in the presence of methotrexate and ATP either free in solution or inside the stable cavity formed between a single ring variant of GroEL, SR1, and GroES. Recovery of DHFR refolded by the SR1/GroES-mediated reaction is 2-fold higher than in the spontaneous reaction. Nevertheless, DHFR folding was found to proceed by the same trajectories inside the cis folding chamber and free in solution. These observations are consistent with the description of the chaperonin chamber as an "Anfinsen cage" where polypeptide folding is determined solely by the amino acid sequence, as it is in solution. However, if misfolding occurs in the confinement of the chaperonin cavity, the polypeptide chain cannot undergo aggregation but rather finds its way back to a productive pathway in a manner that cannot be accomplished in solution, resulting in the observed high overall recovery.

Six years of protein structure determination by NMR spectroscopy: what have we learned?

Nuclear magnetic resonance (NMR) spectroscopy in solution is a second technique, in addition to X-ray diffraction in single crystals, for the determination of three-dimensional protein structures at atomic resolution. Structures of proteins derived by NMR have now been with us for six years, and here I entertain the following question: what information have we gained that would not be available if X-ray crystallography were still the only method for protein structure determination? Answers include that NMR structures are available of proteins that have not been crystallized, that the two techniques afford different insights into internal mobility of proteins, and that one gets different views of protein hydration and hence the molecular surface when using NMR spectroscopy or X-ray diffraction.

NMR spectroscopy and protein folding: studies of lysozyme and alpha-lactalbumin

The description of the folding process for any protein has as a principal objective the characterization of the structural changes that occur during the transition from a disordered state to a highly ordered state. It is now generally accepted that folding occurs via some pathway or pathways which can be described in terms of intermediate, partially folded states. Three complementary strategies have emerged for obtaining structural information about intermediate states. The first involves characterization of species generated transiently during refolding of denatured proteins, either in real time or by means of trapping experiments. The second involves the study of those partially folded states, such as the increasingly recognized molten globule state, which are stable under equilibrium conditions. The third strategy involves the design and study of peptide models of folding intermediates. NMR spectroscopy, because of its ability to provide information at the molecular level about protein structure and dynamics in solution, plays a crucial role in each of these strategies. We describe results from our own studies of lysozyme and alpha-lactalbumin to illustrate the scope and potential of NMR spectroscopy in studies of protein folding.

Folding kinetics of staphylococcal nuclease studied by tryptophan engineering and rapid mixing methods

To monitor the development of tertiary structural contacts during folding, a unique tryptophan residue was introduced at seven partially buried locations (residues 15, 27, 61, 76, 91, 102 and 121) of a tryptophan-free variant of staphylococcal nuclease (P47G/P117G/H124L/W140H). Thermal unfolding measurements by circular dichroism indicate that the variants are destabilized, but maintain the ability to fold into a native-like structure. For the variants with Trp at positions 15, 27 and 61, the intrinsic fluorescence is significantly quenched in the native state due to close contact with polar side-chains that act as intramolecular quenchers. All other variants exhibit enhanced fluorescence under native conditions consistent with burial of the tryptophan residues in an apolar environment. The kinetics of folding was observed by continuous and stopped-flow fluorescence measurements over refolding times ranging from 100 micros to 10 s. The folding kinetics of all variants is quantitatively described by a mechanism involving a major pathway with a series of intermediate states and a minor parallel channel. The engineered tryptophan residues in the beta-barrel and the N-terminal part of the alpha-helical domain become partially shielded from the solvent at an early stage (<1 ms), indicating that this region undergoes a rapid collapse. For some variants, a major increase in fluorescence coincides with the rate-limiting step of folding on the 100 ms time scale, indicating that these tryptophan residues are buried only during the late stages of folding. Other variants exhibit a transient increase in fluorescence during the 10 ms phase followed by a decrease during the rate-limiting phase. These observations are consistent with burial of these probes in a collapsed, but loosely packed intermediate, followed by the rate-limiting formation of the densely packed native core, which brings the tryptophan residues into close contact with intramolecular quenchers.

Conformational analysis of dynorphin A (1-13) using hydrogen-deuterium exchange and tandem mass spectrometry

Trifluoroethanol (TFE)-induced conformational changes in dynorphin A (1-13) were investigated using charge-state distribution (CSD) and hydrogen-deuterium exchange (HDX), combined with electrospray ionization (ESI) mass spectrometry (MS). Individual amino acids involved in secondary structural elements were identified by collision-induced dissociation-tandem mass spectrometry (MS/MS). It was observed that dynorphin A (1-13) largely exists in an unfolded conformation and a folded structure in increasing concentrations of TFE. In 50% TFE, it forms an alpha-helix that encompasses residues 1-9 and remains flexible from residues 10 to 13.

The folding pathway of T4 lysozyme: an on-pathway hidden folding intermediate

T4 lysozyme has two easily distinguishable but energetically coupled domains: the N and C-terminal domains. In earlier studies, an amide hydrogen/deuterium exchange pulse-labeling experiment detected a stable submillisecond intermediate that accumulates before the rate-limiting transition state. It involves the formation of structures in both the N and C-terminal regions. However, a native-state hydrogen exchange experiment subsequently detected an equilibrium intermediate that only involves the formation of the C-terminal domain. Here, using stopped-flow circular dichroism and fluorescence, amide hydrogen exchange-folding competition, and protein engineering methods, we re-examined the folding pathway of T4-lysozyme. We found no evidence for the existence of a stable folding intermediate before the rate-limiting transition state at neutral pH. In addition, using native-state hydrogen exchange-directed protein engineering, we created a mimic of the equilibrium intermediate. We found that the intermediate mimic folds with the same rate as the wild-type protein, suggesting that the equilibrium intermediate is an on-pathway intermediate that exists after the rate-limiting transition state.

Low-Temperature Studies of Encapsulated Proteins

Water-soluble proteins encapsulated within reverse micelles may be studied under a variety of conditions, including low temperature and a wide range of buffer conditions. Direct high-resolution detection of information relating to protein folding intermediates and pathways can be monitored by low-temperature solution NMR. Ubiquitin encapsulated within AOT reverse micelles was studied using multidimensional multinuclear solution NMR to determine the relationship between protein structure, temperature, and ionic strength. Ubiquitin resonances were monitored by 15N HSQC NMR experiments at varying temperatures and salt concentrations. Our results indicate that the structure of the encapsulated protein at low temperature experiences perturbation arising from two major influences, which are reverse micelle-protein interactions and low-temperature effects (e.g., cold denaturation). These two effects are impossible to distinguish under conditions of low ionic strength. Elevated concentrations of nondenaturing salt solutions defeat the effects of reverse micelle-protein interactions and reveal low-temperature protein unfolding. High ionic strength shielding stabilizes the reverse micelle at low temperatures, which reduces the electrostatic interaction between the protein and reverse micelle surfaces, allowing the phenomenon of cold denaturation to be explored.

Structural characterization of methionine and leucine enkephalins by hydrogen/deuterium exchange and electrospray ionization tandem mass spectrometry

Conformational changes in two endogenous opioid active pentapeptides methionine enkephalin (Met-enk) and leucine enkephalin (Leu-enk) induced by trifluoroethanol (TFE) were identified using hydrogen/deuterium exchange (HDX), coupled with electrospray ionization (ESI) mass spectrometry. The exchange features in individual amino acid residues were characterized by acquiring tandem mass spectra of the deuterated peptides. The exact identity of the labile hydrogens involved in HDX reveals that the monomer forms of both peptides adopt an unfolded conformation in aqueous solvent, but prefer the 5-->2 beta-turn secondary structure under the membrane-mimetic environment. The ESI mass spectra of Met-enk and Leu-enk also reveal that the dimer structure of these peptides coexists with the monomer conformation. The extent of the dimer structure is dependent on the peptide concentration and nature of the solvent. The non-polar solvents facilitate the dimer formation.

Probing protein conformation with a minimal photochemical reagent

3H-diazirine (3H-DZN), a photoreactive gas similar in size to water, was used to probe the topography of the surface and inner space of proteins. On photolysis 3H-DZN generates 3H-methylene carbene, which reacts unselectively with its molecular cage, inserting even into C-H bonds. Labeling of bovine alpha-lactalbumin (alpha-LA, MW: 14,200) with 1 mM (3)H-DZN yielded 0.0041 mol CH2/mol of protein, in agreement with the expectation for an unspecific surface-labeling phenomenon. The cooperative urea-induced unfolding of alpha-LA, as monitored by the extent of 3H-methylene labeling, agrees with that measured by circular dichroism spectroscopy in the far and near ultraviolet regions. At 8 M urea, the unfolded state U was labeled 25-30% more than the native state N primarily because of the increase in the accessible surface area (ASA) of the protein occurring upon unfolding. However, this result lies below the approximately 100% increment expected from theoretical estimates of ASA of state U. Among other factors, most likely the existence of a residual structure in U, that involves helices H2 and H4 of the alpha subdomain, might account for this fact, as shown by a comparative analysis of peptide labeling patterns of N and U samples. In this paper, we demonstrate the usefulness of the 3H-methylene labeling method to monitor conformational transitions and map solvent accessibility along the polypeptide sequence, thus opening the possibility of outlining structural features of nonnative states (i.e., denatured states, molten globule). We anticipate that this technique also would help to identify ligand binding and oligomerization sites in proteins.

Native state EX2 and EX1 hydrogen exchange of Escherichia coli CspA, a small beta-sheet protein

Escherichia coli CspA is a small all-beta-sheet protein that folds fast (tau = 4 ms) via an apparent two-state mechanism. Our previous studies have shown that a large aromatic cluster on the surface of the protein participates in the rate-limiting step of folding and thus may be part of the folding nucleus of this protein. To obtain a more detailed picture of molecular events at the peptide backbone during unfolding and folding of CspA, we used native state hydrogen exchange and nuclear magnetic resonance spectroscopy (NMR). The experiments with native CspA were performed over a range of pH values from low pH, where exchange is governed by a rapid equilibrium before chemical exchange (EX2 exchange), to high pH, where exchange is dictated by the rate of unfolding (EX1 exchange). Rates of folding and unfolding were determined for 11 residues. The distribution of rates of folding within the structure of CspA suggests that hairpin turns, including one near the aromatic cluster, may nucleate the folding of CspA.

Early formation of a beta hairpin during folding of staphylococcal nuclease H124L as detected by pulsed hydrogen exchange

Pulsed hydrogen exchange methods were used to follow the formation of structure during the refolding of acid-denatured staphylococcal nuclease containing a stabilizing Leu substitution at position 124 (H124L SNase). The protection of more than 60 backbone amide protons in uniformly (15)N-labeled H124L SNase was monitored as a function of refolding time by heteronuclear two-dimensional NMR spectroscopy. As found in previous studies of staphylococcal nuclease, partial protection was observed for a subset of amide protons even at the earliest folding time point (10 msec). Protection indicative of marginally stable hydrogen-bonded structure in an early folding intermediate was observed at over 30 amide positions located primarily in the beta-barrel and to a lesser degree in the alpha-helical domain of H124L SNase. To further characterize the folding intermediate, protection factors for individual amide sites were measured by varying the pH of the labeling pulse at a fixed refolding time of 16 msec. Protection factors >5.0 were observed only for amide positions in a beta-hairpin formed by strands 2 and 3 of the beta-barrel domain and a single site near the C-terminus. The results indicate that formation of stable hydrogen-bonded structure in a core region of the beta-sheet is among the earliest structural events in the folding of SNase and may serve as a nucleation site for further structure formation.

Studies of biomolecular conformations and conformational dynamics by mass spectrometry

In the post-genomic era, a wealth of structural information has been amassed for proteins from NMR and crystallography. However, static protein structures alone are not a sufficient description: knowledge of the dynamic nature of proteins is essential to understand their wide range of functions and behavior during the life cycle from synthesis to degradation. Furthermore, few proteins have the ability to act alone in the crowded cellular environment. Assemblies of multiple proteins governed by complex signaling pathways are often required for the tasks of target recognition, binding, transport, and function. Mass spectrometry has emerged over the past several years as a powerful tool to address many of these questions. Recent improvements in "soft" ionization techniques have enabled researchers to study proteins and biomolecular complexes, both directly and indirectly. Likewise, continuous improvements in instrumental design in recent years have resulted in a dramatic expansion of the m/z range and resolution, enabling observation of large multi-protein assemblies whose structures are retained in the gas phase. In this article, we discuss some of the mass spectrometric techniques applied to investigate the nature of the conformations and dynamical properties that govern protein function.

Origin of apparent fast and non-exponential kinetics of lysozyme folding measured in pulsed hydrogen exchange experiments

Folding of lysozyme at pH 5.2 is a complex processes. After rapid collapse (<1 ms) kinetic partitioning into a slow and fast folding pathway occurs. The fast pathway leads directly to the native structure (N), whereas the slow pathway goes through a partially folded intermediate (I(1)) with native-like secondary structure in the alpha-domain. This mechanism is in agreement with data from a large number of spectroscopic probes, from changes in the radius of gyration and from measurements on the time-course of the populations of the different species. Results from pulsed hydrogen exchange experiments, in contrast, revealed that the secondary structure of I(1) and of N is formed significantly faster than changes in spectroscopic properties occur and showed large variations in the protection kinetics of individual amide sites. We investigated the molecular origin of the rapid amide protection by quantitatively simulating all kinetic processes during the pulse-labeling experiments. Absorbance and fluorescence-detected folding kinetics showed that the early events in lysozyme folding are accelerated under exchange conditions (pH 9.2) and that a change in folding mechanism occurs due to the transient population of an additional intermediate (I(2)). This leads to kinetic competition between exchange and folding during the exchange pulse and to incomplete labeling of amide sites with slow intrinsic exchange rates. As a result, apparently faster and non-exponential kinetics of amide protection are measured in the labeling experiments. Our results further suggest that collapsed lysozyme (C) and I(1) have five and ten-times reduced free exchange rates, respectively, due to limited solvent accessibility.

Observation of the closing of individual hydrogen bonds during TFE-induced helix formation in a peptide

Helix formation of an S-peptide analog, comprising the first 20 residues of Ribonuclease A and two additional N-terminal residues, was studied by measuring hydrogen bond (H-bond) (h3)J(NC') scalar couplings as a function of 2,2,2-trifluoroethanol (TFE) concentration. The (h3)J(NC') couplings give direct evidence for the closing of individual backbone N-H***O = C H-bonds during the TFE-induced formation of secondary structure. Whereas no (h3)J(NC') correlations could be detected without TFE, alpha-helical (i,i +4) H-bond correlations were observed for the amides of residues A5 to M15 in the presence of TFE. The analysis of individual coupling constants indicates that alpha-helix formation starts at the center of the S-peptide around residue E11 and proceeds gradually from there to both peptide ends as the TFE concentration is increased. At 60% to 90% TFE, well-formed alpha-helical H-bonds were observed for the amides hydrogens of residues K9 to Q13, whereas H-bonds of residues T5 to A8, H14, and M15 are affected by fraying. No intramolecular backbone H-bonds are present at and beyond the putative helix stop signal D16. As the (h3)J(NC') constants represent ensemble averages and the dependence of (h3)J(NC') on H-bond lengths is very steep, the size of the individual (h3)J(NC') coupling constants can be used as a measure for the population of a closed H-bond. These individual populations are in agreement with results derived from the Lifson-Roig theory for coil-to-helix transitions. The present work shows that the closing of individual H-bonds during TFE-induced helix formation can be monitored by changes in the size of H-bond scalar couplings.

Protein folding intermediates and pathways studied by hydrogen exchange

In order to solve the immensely difficult protein-folding problem, it will be necessary to characterize the barriers that slow folding and the intermediate structures that promote it. Although protein-folding intermediates are not accessible to the usual structural studies, hydrogen exchange (HX) methods have been able to detect and characterize intermediates in both kinetic and equilibrium modes--as transient kinetic folding intermediates on a subsecond time scale, as labile equilibrium molten globule intermediates under destabilizing conditions, and as infinitesimally populated intermediates in the high free-energy folding landscape under native conditions. Available results consistently indicate that protein-folding landscapes are dominated by a small number of discrete, metastable, native-like partially unfolded forms (PUFs). The PUFs appear to be produced, one from another, by the unfolding and refolding of the protein's intrinsically cooperative secondary structural elements, which can spontaneously create stepwise unfolding and refolding pathways. Kinetic experiments identify three kinds of barrier processes: (a) an initial intrinsic search-nucleation-collapse process that prepares the chain for intermediate formation by pinning it into a condensed coarsely native-like topology; (b) smaller search-dependent barriers that put the secondary structural units into place; and (c) optional error-dependent misfold-reorganization barriers that can cause slow folding, intermediate accumulation, and folding heterogeneity. These conclusions provide a coherent explanation for the grossly disparate folding behavior of different globular proteins in terms of distinct folding pathways.

Methylene as a possible universal footprinting reagent that will include hydrophobic surface areas: overview and feasibility: properties of diazirine as a precursor

Methylene is one of, if not the, most reactive organic chemical known. It has a very low specificity, which makes it essentially useless for synthesis, but suggests a possible role in protein footprinting with special importance in labeling solvent accessible nonpolar areas, identifying ligand binding sites, and outlining interaction areas on protomers that form homo or hetero oligomers in cellular assemblies. The singlet species is easily and conveniently formed by photolysis of diazirine. The reactions of interest are insertion into C-H bonds and addition to multiple bonds, both forming strong covalent bonds and stable compounds. Reaction with proteins and peptides is reported even in aqueous solutions where the vast majority of the reagent is used up in forming methanol. Species containing up to 5 to 10 extra :CH2 groups are easily detected by electrospray mass spectroscopy. In a mixture of a 14 Kd protein and a noninteracting 1.7 Kd peptide, the distribution of mass peaks in the electrospray spectra was close to that expected from random modification of the estimated solvent accessible area for the two molecules. For analysis at the single residue level, quantitation at labeling levels of one 13CH2 group per 10 to 20 kDa of protein appears to be possible with isotope ratio mass spectroscopy. In the absence of reactive solvents, photolysis of diazirine produces oily polymeric species that contain one or two nitrogen atoms, but not more, and are water soluble.

Characterization of intermolecular beta-sheet peptides by mass spectrometry and hydrogen isotope exchange

The self-assembly of beta-sheet peptide domains resulting in the formation of fibrillar aggregates (amyloids) is a feature of various neurodegenerative disorders. In order to evaluate mass spectrometric methods for the characterization of intermolecular beta-sheet structures the hydrogen/deuterium exchange behaviour of model peptides DPKGDPKG-(VT)(n)-GKGDPKPD-amide (n = 3,4,5,6,7,8), (VT)(n)-peptides, composed of a central beta-sheet-forming domain and N- and C-terminal nonstructured octapeptide sequences, was measured by electrospray ionization mass spectrometry (ESI-MS) and matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS). The kinetic analysis of the hydrogen/deuterium exchange (HX) shows that intermolecular beta-sheet structures contain slowly exchanging protons (k </=0.001 1/min). Localization of beta-sheet domains was achieved by monitoring the hydrogen exchange of peptide fragments generated via collision-induced dissociation (CID) or post source decay (PSD). The hydrogen exchange kinetics and the beta-sheet domains determined by ESI- and MALDI-MS were found to correlate with the length and stability of the beta-structure domain of the (VT)(n)-peptides.

Methods for exploring early events in protein folding

Progress in understanding dynamic aspects of protein folding relies on the continuing development of methods for obtaining more detailed structural information on the transient conformational ensembles that often appear within microseconds of initiating refolding. Advances in rapid mixing and other time-resolved spectroscopic methods have made it possible to explore some of the earliest stages of folding, including the initial formation of compact states, which is determined by the presence of a sequence-specific kinetic barrier, as well as the 'downhill' folding kinetics after the rate-limiting barrier has been crossed.

The hydrogen exchange core and protein folding

A database of hydrogen-deuterium exchange results has been compiled for proteins for which there are published rates of out-exchange in the native state, protection against exchange during folding, and out-exchange in partially folded forms. The question of whether the slow exchange core is the folding core (Woodward C, 1993, Trends Biochem Sci 18:359-360) is reexamined in a detailed comparison of the specific amide protons (NHs) and the elements of secondary structure on which they are located. For each pulsed exchange or competition experiment, probe NHs are shown explicitly; the large number and broad distribution of probe NHs support the validity of comparing out-exchange with pulsed-exchange/competition experiments. There is a strong tendency for the same elements of secondary structure to carry NHs most protected in the native state, NHs first protected during folding, and NHs most protected in partially folded species. There is not a one-to-one correspondence of individual NHs. Proteins for which there are published data for native state out-exchange and theta values are also reviewed. The elements of secondary structure containing the slowest exchanging NHs in native proteins tend to contain side chains with high theta values or be connected to a turn/loop with high theta values. A definition for a protein core is proposed, and the implications for protein folding are discussed. Apparently, during folding and in the native state, nonlocal interactions between core sequences are favored more than other possible nonlocal interactions. Other studies of partially folded bovine pancreatic trypsin inhibitor (Barbar E, Barany G, Woodward C, 1995, Biochemistry 34:11423-11434; Barber E, Hare M, Daragan V, Barany G, Woodward C, 1998, Biochemistry 37:7822-7833), suggest that developing cores have site-specific energy barriers between microstates, one disordered, and the other(s) more ordered.

Matrix-assisted laser desorption ionization hydrogen/deuterium exchange studies to probe peptide conformational changes

Hydrogen/deuterium (H/D) exchange chemistry monitored by matrix-assisted laser desorption ionization time-of-flight (MALDI-TOF) mass spectrometry is used to study solution phase conformational changes of bradykinin, alpha-melanocyte stimulating hormone, and melittin as water is added to methanol-d4, acetonitrile, and isopropanol-d8 solutions. The results are interpreted in terms of a preference for the peptides to acquire more compact conformations in organic solvents as compared to the random conformations. Our interpretation is supported by circular dichroism spectra of the peptides in the same solvent systems and by previously published structural data for the peptides. These results demonstrate the utility of MALDI-TOF as a method to monitor the H/D exchange chemistry of peptides and investigations of solution-phase conformations of biomolecules.

1H-nuclear magnetic resonance studies on the conformational changes related to the foaming properties of beta-lactoglobulin

beta-Lactoglobulin (beta-LG) is a whey protein with foaming ability that can be used as a food ingredient. The structural changes that occur during foaming cannot be easily assessed. In combination with deuterium exchange, 1H-NMR allows new insight into the structural features of beta-LG during foaming. beta-Lactoglobulin was dissolved in D2O and forced to foam. During foaming, the amide protons of exposed residues were exchanged for deuterium atoms, which do not appear in the 1H-NMR spectrum. Protein in solutions that had produced unstable foams showed no exchange beyond that found in unfoamed controls, indicating that the structure had remained intact. Protein in solutions that had produced stable foams showed extensive exchange. Protons of both Trp19 and Met107 exchanged with deuterium, indicating that most of the interior had been exposed to solvent. Most of the beta-LG structure was recovered after collapse of the foam. In the early steps of foaming, apparently only random coil or other exposed regions are involved in foam stabilization. More vigorous shear stress forces induce further unfolding of the beta-strands. This unfolding is suggested to be a dynamic, reversible equilibrium between an open and closed conformation of beta-strands that allows not only for interaction of the protein with the air phase but also for some secondary structure to be retained and the original structure to be recovered. Freeze-dry foaming is also discussed.

Amide protection in an early folding intermediate of cytochrome c

BACKGROUND

For many proteins, compact states appear long before the rate-limiting step in the formation of the native structure. A key issue is whether the initial collapse of the chain is driven by random or more specific hydrophobic interactions.

RESULTS

Hydrogen-exchange labeling coupled with NMR was used to monitor the formation of stable hydrogen-bonded and solvent-excluded structure in horse cytochrome c (cyt c). Protection was measured using a hydrogen exchange/folding competition protocol at variable pH and short competition time (2 ms). Protection factors of threefold to eightfold were observed in all three alpha helices of cyt c, whereas other regions showed no significant protection. This suggests that the compact states that are present contain segments of marginally stable hydrogen-bonded structure. When the intermediate(s) are destabilized, only amide protons from Cys14, Ala15 and His18 show significant protection, indicating a region of persistent residual structure near the covalently bound heme group in the unfolded protein. Fluorescence-detected stopped-flow studies showed that the maximum protection factor in the early intermediate is consistent with its unfolding equilibrium constant.

CONCLUSIONS

Together with previous fluorescence and CD results, the observed pattern of amide protection is consistent with the early formation of an alpha-helical core domain in an ensemble of compact states, indicating that efficient folding is facilitated by stepwise acquisition of native structural elements. These specific early interactions are established on the sub-millisecond time scale, prior to the rate-limiting step for folding.

Definition of amide protection factors for early kinetic intermediates in protein folding

Hydrogen-deuterium exchange experiments have been used previously to investigate the structures of well defined states of a given protein. These include the native state, the unfolded state, and any intermediates that can be stably populated at equilibrium. More recently, the hydrogen-deuterium exchange technique has been applied in kinetic labeling experiments to probe the structures of transiently formed intermediates on the kinetic folding pathway of a given protein. From these equilibrium and nonequilibrium studies, protection factors are usually obtained. These protection factors are defined as the ratio of the rate of exchange of a given backbone amide when it is in a fully solvent-exposed state (usually obtained from model peptides) to the rate of exchange of that amide in some state of the protein or in some intermediate on the folding pathway of the protein. This definition is straightforward for the case of equilibrium studies; however, it is less clear-cut for the case of transient kinetic intermediates. To clarify the concept for the case of burst-phase intermediates, we have introduced and mathematically defined two different types of protection factors: one is P struc, which is more related to the structure of the intermediate, and the other is P app, which is more related to the stability of the intermediate. Kinetic hydrogen-deuterium exchange data from disulfide-intact ribonuclease A and from cytochrome c are discussed to explain the use and implications of these two definitions.