Nanomaterial-enabled Rapid Detection of Water Contaminants

An ionic liquid-modified PEDOT/Ti3C2TX based molecularly imprinted electrochemical sensor for pico-molar sensitive detection of L-Tryptophan in milk

L-Tryptophan (L-Trp) is essential for the human body and can only be obtained externally. It is important to develop a method to efficiently detect L-Trp in food. In this work, ionic liquid (IL) modified poly(3,4-ethylendioxythiophene)/ Titanium carbide (PEDOT/Ti3C2TX) was used as a substrate material to improve detection sensitivity. Molecular imprinted polymers (MIP) film for specific recognition of L-Trp was fabricated on the surface of modified electrodes using electrochemical polymerization. The monitoring results showed that the molecularly imprinted electrochemical sensors (MIECS) exhibited good linearity ranges (10-6 - 0.1 μM and 0.1-100 μM) with a low detection limit (LOD) of 2.09 × 10-7 μM. In addition, the MIECS exhibited remarkable stability, reproducibility, and immunity to interference. A good recovery (93.54-99.59%) was demonstrated in the detection of milk. The sensor was expected to be developed as a highly selective and sensitive portable assay, and applied to the detection of L-Trp in food.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

A Semi-Automatic Environmental Monitoring Device for Mercury and Cobalt Ion Detection

A syringe-based, semi-automatic environmental monitoring device is developed for on-site detection of harmful heavy metal ions in water. This portable device consists of a spring-embedded syringe and a polydimethylsiloxane (PDMS) membrane-based flow regulator for semi-automatic fix-and-release fluidic valve actuation, and a paper-based analytical device (PAD) with two kinds of gold nanoclusters (AuNCs) for sensitive Hg2+ and Co2+ ion detection, respectively. The thickness of the elastic PDMS membrane can be adjusted to stabilize and modulate the flow rates generated by the pushing force provided by the spring attached to the plunger. Also, different spring constants can drastically alter the response time. People of all ages can extract the fix-volume sample solutions and then release them to automatically complete the detection process, ensuring high reliability and repeatability. The PAD comprises two layers of modified paper, and each layer is immobilized with bovine serum albumin-capped gold nanoclusters (R-AuNCs) and glutathione-capped gold clusters (G-AuNCs), respectively. The ligands functionalized on the surface of the AuNCs not only can fine-tune the optical properties of the nanoclusters but also enable specific and simultaneous detection of Hg2+ and Co2+ ions via metallophilic Au+ -Hg2+ interaction and the Co2+ -thiol complexation effect, respectively. The feasibility of the device for detecting heavy metal ions at low concentrations in various environmental water samples is demonstrated. The Hg2+ and Co2+ ions can be seen simultaneously within 20 min with detection limits as low as 1.76 nm and 0.27 µm, respectively, lower than those of the regulatory restrictions on water by the US Environmental Protection Agency and the European Union. we expect this sensitive, selective, portable, and easy-to-use device to be valid for on-site multiple heavy metal ion pollution screenings in resource-constrained settings.

A rapid total bacterial count method using gold nanoparticles conjugated with an aptamer for water quality assessment

Total bacterial count is a routine parameter in microbial safety assessment used in many fields, such as drinking water and industrial water testing. The current gold standard method for counting bacteria is the plate culture method (or heterotrophic plate count) that requires a microbiology laboratory and a long turnover time of at least 24 hours. To tackle these shortcomings, we developed a rapid total bacterial count method that relies on gold nanoparticles (AuNPs) conjugated with affinity ligands to stain bacterial cells captured on a syringe filter. Two affinity ligands were exploited, i.e. a DNA aptamer (AB2) and a lectin Griffonia simplicifolia II (GSII) that recognize bacterial cell wall commonalities, i.e. peptidoglycan and its amino sugars. Upon proper formulation with addition of a surfactant, the AB2 conjugated AuNPs (AB2-AuNPs) can selectively stain bacterial cells captured on the filter membrane with a higher sensitivity than GSII-AuNPs. Measuring the staining intensity using an in-house-built handheld detector allowed us to correlate its intensity reading with the total number of bacterial units present. This bacteria quantification method, referred to as "Filter-and-Stain", had an efficient turnover time of 20 min suggesting its potential usage for rapid on-site applications. Additionally, the detection sensitivity provided by the AB2-AuNP nanoreagent offered a limit of detection as low as 100 CFU mL-1. We have demonstrated the use of the AB2-AuNPs for detection of bacteria from environmental water samples.

Hotspots and Trends of Layered Double Hydroxide-based Adsorbents for Polluted Water Treatment: Insights from Bibliometric Analysis

The use of layered double hydroxides (LDHs) as adsorbent for water treatment has been gaining relevance in recent years. In this context, this work aimed to map, through a bibliometric study, the extent of research that deals with the theme. The scientific database used was the Web of Science, and the chronology of the search consideredthe period from 1997 to 2022. The bibliometix R-package and VOSviewer software were used in this study. The searches retrieved a total of 663 documents, from 69 countries, distributed among all continents, which China (328), India (51) and Japan (40) were the most productive countries. Important journals in the environmental area and with high impact factor, such as Chemical Engineering Journal (44), Applied Clay Science (38), Journal of Hazardous Materials (35) and Chemosphere (27) most published in the area. The network of keywords used by the authors indicates that the publications retrieved deal mainly with aspects related to the efficiency of (LDHs) in the removal of different pollutants, the composition, the synthesis route and the association with other materials and/or techniques. The result of this study constitutes an important tool for directing future research on the subject.

Review on two-dimensional material-based field-effect transistor biosensors: accomplishments, mechanisms, and perspectives

Field-effect transistor (FET) is regarded as the most promising candidate for the next-generation biosensor, benefiting from the advantages of label-free, easy operation, low cost, easy integration, and direct detection of biomarkers in liquid environments. With the burgeoning advances in nanotechnology and biotechnology, researchers are trying to improve the sensitivity of FET biosensors and broaden their application scenarios from multiple strategies. In order to enable researchers to understand and apply FET biosensors deeply, focusing on the multidisciplinary technical details, the iteration and evolution of FET biosensors are reviewed from exploring the sensing mechanism in detecting biomolecules (research direction 1), the response signal type (research direction 2), the sensing performance optimization (research direction 3), and the integration strategy (research direction 4). Aiming at each research direction, forward perspectives and dialectical evaluations are summarized to enlighten rewarding investigations.

Intense pH Sensitivity Modulation in Carbon Nanotube-Based Field-Effect Transistor by Non-Covalent Polyfluorene Functionalization

We compare the pH sensing performance of non-functionalized carbon nanotubes (CNT) field-effect transistors (p-CNTFET) and CNTFET functionalized with a conjugated polyfluorene polymer (labeled FF-UR) bearing urea-based moieties (f-CNTFET). The devices are electrolyte-gated, PMMA-passivated, 5 µm-channel FETs with unsorted, inkjet-printed single-walled CNT. In phosphate (PBS) and borate (BBS) buffer solutions, the p-CNTFETs exhibit a p-type operation while f-CNTFETs exhibit p-type behavior in BBS and ambipolarity in PBS. The sensitivity to pH is evaluated by measuring the drain current at a gate and drain voltage of -0.8 V. In PBS, p-CNTFETs show a linear, reversible pH response between pH 3 and pH 9 with a sensitivity of 26 ± 2.2%/pH unit; while f-CNTFETs have a much stronger, reversible pH response (373%/pH unit), but only over the range of pH 7 to pH 9. In BBS, both p-CNTFET and f-CNTFET show a linear pH response between pH 5 and 9, with sensitivities of 56%/pH and 96%/pH, respectively. Analysis of the I-V curves as a function of pH suggests that the increased pH sensitivity of f-CNTFET is consistent with interactions of FF-UR with phosphate ions in PBS and boric acid in BBS, with the ratio and charge of the complexed species depending on pH. The complexation affects the efficiency of electrolyte gating and the surface charge around the CNT, both of which modify the I-V response of the CNTFET, leading to the observed current sensitivity as a function of pH. The performances of p-CNTFET in PBS are comparable to the best results in the literature, while the performances of the f-CNTFET far exceed the current state-of-the-art by a factor of four in BBS and more than 10 over a limited range of pH in BBS. This is the first time that a functionalization other than carboxylate moieties has significantly improved the state-of-the-art of pH sensing with CNTFET or CNT chemistors. On the other hand, this study also highlights the challenge of transferring this performance to a real water matrix, where many different species may compete for interactions with FF-UR.

Prospects of Biosensors Based on Functionalized and Nanostructured Solitary Materials: Detection of Viral Infections and Other Risks

Advances in nanotechnology over the past decade have emerged as a substitute for conventional therapies and have facilitated the development of economically viable biosensors. Next-generation biosensors can play a significant role in curbing the spread of various viruses, including HCoV-2, and controlling morbidity and mortality. Pertaining to the impact of the current pandemic, there is a need for point-of-care biosensor-based testing as a detection method to accelerate the detection process. Integrating biosensors with nanostructures could be a substitute for ultrasensitive label-free biosensors to amplify sensing and miniaturization. Notably, next-generation biosensors could expedite the detection process. An elaborate description of various types of functionalized nanomaterials and their synthetic aspects is presented. The utility of the functionalized nanostructured materials for fabricating nanobiosensors to detect several types of viral infections is described in this review. This review also discusses the choice of appropriate nanomaterials, as well as challenges and opportunities in the field of nanobiosensors.

Copper ions assisted fluorescent detection of some dithiocarbamates based on nickel nanocluster with aggregation-induced emission enhancement behavior

Pesticide residue contamination has become an urgent issue since it threatens both the natural environment and public health. In this study, a fluorescent method for detecting dithiocarbamate (DTC) compounds was constructed based on novel nickel nanoclusters (Ni NCs) and copper ions (Cu²⁺). The water-soluble fluorescent Ni NCs were synthesized for the first time through a one-pot method using glutathione as stabilizer and ascorbic acid as reducing agent. The as-prepared Ni NCs exhibited a maximum fluorescence emission at 445 nm when excited by 380 nm. And they displayed aggregation-induced emission enhancement when ethylene glycol was introduced into the nanocluster aqueous solution. Based on the Ni NCs, a label-free fluorescence quenching sensor was established for sensitive and selective detection of DTC compounds with the assistance of Cu²⁺. The complex formed by DTC and Cu²⁺ led to fluorescence quenching of Ni NCs through inner filter effect. The sensing method was successfully applied to two typical DTC compounds, thiram and disulfiram, with good linearity over a wide linear range and a low detection limit. Moreover, the proposed approach was capable of thiram detection in real samples, which confirms the potential of this sensing method as a platform for DTC compound detection.

Monitoring the Viral Transmission of SARS-CoV-2 in Still Waterbodies Using a Lanthanide-Doped Carbon Nanoparticle-Based Sensor Array

The latest epidemic of extremely infectious coronavirus disease 2019 (COVID-19) has created a significant public health concern. Despite substantial efforts to contain severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) within a specific location, shortcomings in the surveillance of predominantly asymptomatic infections constrain attempts to identify the epidemiological spread of the virus. Continuous surveillance of wastewater streams, including sewage, offers opportunities to track the spread of SARS-CoV-2, which is believed to be found in fecal waste. To demonstrate the feasibility of SARS-CoV-2 detection in wastewater systems, we herein present a novel facilely constructed fluorescence sensing array based on a panel of three different lanthanide-doped carbon nanoparticles (LnCNPs). The differential fluorescence response pattern due to the counterion-ligand interactions allowed us to employ powerful pattern recognition to effectively detect SARS-CoV-2 and differentiate it from other viruses or bacteria. The sensor results were benchmarked to the gold standard RT-qPCR, and the sensor showed excellent sensitivity (1.5 copies/μL) and a short sample-to-results time of 15 min. This differential response of the sensor array was also explained from the differential mode of binding of the LnCNPs with the surface proteins of the studied bacteria and viruses. Therefore, the developed sensor array provides a cost-effective, community diagnostic tool that could be potentially used as a novel epidemiologic surveillance approach to mitigate the spread of COVID-19.

Multi-functional metal-organic frameworks for detection and removal of water pollutions

Water pollutions have caused serious threats to the aquatic environment and human health, it is of great significance to monitor and control their contents in water. Compared with the traditional...

Electrical and Electrochemical Sensors Based on Carbon Nanotubes for the Monitoring of Chemicals in Water-A Review

Carbon nanotubes (CNTs) combine high electrical conductivity with high surface area and chemical stability, which makes them very promising for chemical sensing. While water quality monitoring has particularly strong societal and environmental impacts, a lot of critical sensing needs remain unmet by commercial technologies. In the present review, we show across 20 water monitoring analytes and 90 references that carbon nanotube-based electrochemical sensors, chemistors and field-effect transistors (chemFET) can meet these needs. A set of 126 additional references provide context and supporting information. After introducing water quality monitoring challenges, the general operation and fabrication principles of CNT water quality sensors are summarized. They are sorted by target analytes (pH, micronutrients and metal ions, nitrogen, hardness, dissolved oxygen, disinfectants, sulfur and miscellaneous) and compared in terms of performances (limit of detection, sensitivity and detection range) and functionalization strategies. For each analyte, the references with best performances are discussed. Overall, the most frequently investigated analytes are H+ (pH) and lead (with 18% of references each), then cadmium (14%) and nitrite (11%). Micronutrients and toxic metals cover 40% of all references. Electrochemical sensors (73%) have been more investigated than chemistors (14%) or FETs (12%). Limits of detection in the ppt range have been reached, for instance Cu(II) detection with a liquid-gated chemFET using SWCNT functionalized with peptide-enhanced polyaniline or Pb(II) detection with stripping voltammetry using MWCNT functionalized with ionic liquid-dithizone based bucky-gel. The large majority of reports address functionalized CNTs (82%) instead of pristine or carboxyl-functionalized CNTs. For analytes where comparison is possible, FET-based and electrochemical transduction yield better performances than chemistors (Cu(II), Hg(II), Ca(II), H2O2); non-functionalized CNTs may yield better performances than functionalized ones (Zn(II), pH and chlorine).

Flexible Screen-Printed Electrochemical Sensors Functionalized with Electrodeposited Copper for Nitrate Detection in Water

Nitrate (NO₃ ^-) contamination is becoming a major concern due to the negative effects of an excessive NO₃ ^- presence in water which can have detrimental effects on human health. Sensitive, real-time, low-cost, and portable measurement systems able to detect extremely low concentrations of NO₃ ^- in water are thus becoming extremely important. In this work, we present a novel method to realize a low-cost and easy to fabricate amperometric sensor capable of detecting small concentrations of NO₃ ^- in real water samples. The novel fabrication technique combines printing of a silver (Ag) working electrode with subsequent modification of the electrode with electrodeposited copper (Cu) nanoclusters. The process was tuned in order to reach optimized sensor response, with a high catalytic activity toward electroreduction of NO₃ ^- (sensitivity: 19.578 μA/mM), as well as a low limit of detection (LOD: 0.207 nM or 0.012 μg/L) and a good dynamic linear concentration range (0.05 to 5 mM or 31 to 310 mg/L). The sensors were tested against possible interference analytes (NO₂ ^-, Cl^-, SO₄ ^2-, HCO₃ ^-, CH₃COO^-, Fe²⁺, Fe³⁺, Mn²⁺, Na⁺, and Cu²⁺) yielding only negligible effects [maximum standard deviation (SD) was 3.9 μA]. The proposed sensors were also used to detect NO₃ ^- in real samples, including tap and river water, through the standard addition method, and the results were compared with the outcomes of high-performance liquid chromatography (HPLC). Temperature stability (maximum SD 3.09 μA), stability over time (maximum SD 3.69 μA), reproducibility (maximum SD 3.20 μA), and repeatability (maximum two-time useable) of this sensor were also investigated.

Spatiotemporal dynamics of nanowire growth in a microfluidic reactor

Co-integration of nanomaterials into microdevices poses several technological challenges and presents numerous scientific opportunities that have been addressed in this paper by integrating zinc oxide nanowires (ZnO-NWs) into a microfluidic chamber. In addition to the applications of these combined materials, this work focuses on the study of the growth dynamics and uniformity of nanomaterials in a tiny microfluidic reactor environment. A unique experimental platform was built through the integration of a noninvasive optical characterization technique with the microfluidic reactor. This platform allowed the unprecedented demonstration of time-resolved and spatially resolved monitoring of the in situ growth of NWs, in which the chemicals were continuously fed into the microfluidic reactor. The platform was also used to assess the uniformity of NWs grown quickly in a 10-mm-wide microchamber, which was intentionally chosen to be 20 times wider than those used in previous attempts because it can accommodate applications requiring a large surface of interaction while still taking advantage of submillimeter height. Further observations included the effects of varying the flow rate on the NW diameter and length in addition to a synergetic effect of continuous renewal of the growth solution and the confined environment of the chemical reaction.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Electrochemical detection of heavy metal ions in water

Heavy metal ions are one of the main sources of water pollution. Most heavy metal ions are carcinogens that pose a threat to both ecological balance and human health. With the increasing demand for heavy metal detection, electrochemical detection is favorable due to its high sensitivity and efficiency. Here, after discussing the pollution sources and toxicities of Hg(ii), Cd(ii), As(iii), Pb(ii), UO₂(ii), Tl(i), Cr(vi), Ag(i), and Cu(ii), we review a variety of recent electrochemical methods for detecting heavy metal ions. Compared with traditional methods, electrochemical methods are portable, fast, and cost-effective, and they can be adapted to various on-site inspection sites. Our review shows that the electrochemical detection of heavy metal ions is a very promising strategy that has attracted widespread attention and can be applied in agriculture, life science, clinical diagnosis, and analysis.

Label-Free, Fast Response, and Simply Operated Silver Ion Detection with a Ti3C2Tx MXene Field-Effect Transistor

Silver (Ag) is a widely used heavy metal, and its oxidation state (Ag⁺) causes serious harm to organisms after bioaccumulation and biomagnification, posing urgent demand for the rapid, efficient, and simply operated Ag⁺ detection techniques. In this work, a fast, portable, and label-free Ag⁺ detection sensor based on a Ti₃C₂T_x MXene field-effect transistor (FET) is reported. The Ti₃C₂T_x MXene works as the sensing element in the FET sensor, which shows excellent sensing performance, i.e., fast response (few seconds) and good sensitivity and selectivity to Ag⁺ without any detection label or probe. Utilizing the visual photograph, transmission electron microscopy image, and Ag elemental mapping analysis, the sensing mechanism of the label-free Ti₃C₂T_x MXene FET sensor is demonstrated to be the in situ reduction of Ag⁺ and the formation of Ag nanoparticles (AgNPs). Moreover, Ag⁺ detection in real samples shows that the proposed FET devices have satisfactory sensing capability for Ag⁺ in tap water and river water. This study puts forward a novel FET strategy for Ag⁺ detection in aqueous systems, which is of essential and inspiring meaning for motivating the potential applications of MXene-based sensor devices in analytical applications and the realization of on-site environmental monitoring.

Nanomaterial-based fluorescent sensors for the detection of lead ions

Lead (Pb) poisoning has been a scourge to the human to pose sighnificant health risks (e.g., organ disorders, carcinogenicity, and genotoxicity) as observed from many different parts of the world, especially in developing countries. The demand for accurate sensors for its detection, especially in environmental media (soil, water, food, etc.) has hence been growing steadily over the years. The potential utility of fluorescent nanosensors as an important analytical tool is recognized due to their astonishing characteristics (e.g., high sensitivity/selectivity, enhanced detection performance, low cost, portability, and rapid on-site detection ability). This review is organized to offer insight into the recent developments in fluorescent nanosensing technology for the detection of lead ions (Pb²⁺). To this end, different types of nanomaterials explored for such applications have been classified and evaluated with respect to performance, especially in terms of sensitivity. This review will help researchers gain a better knowledge on the status and importance of optical nanosensors so as to remediate the contamination of lead and associated problems. The technical challenges and prospects in the development of nanosensing systems for Pb²⁺ are also discussed.

Multienzymes activity of metals and metal oxide nanomaterials: applications from biotechnology to medicine and environmental engineering

With the rapid advancement and progress of nanotechnology, nanomaterials with enzyme-like catalytic activity have fascinated the remarkable attention of researchers, due to their low cost, high operational stability, adjustable catalytic activity, and ease of recycling and reuse. Nanozymes can catalyze the same reactions as performed by enzymes in nature. In contrast the intrinsic shortcomings of natural enzymes such as high manufacturing cost, low operational stability, production complexity, harsh catalytic conditions and difficulties of recycling, did not limit their wide applications. The broad interest in enzymatic nanomaterial relies on their outstanding properties such as stability, high activity, and rigidity to harsh environments, long-term storage and easy preparation, which make them a convenient substitute instead of the native enzyme. These abilities make the nanozymes suitable for multiple applications in sensing and imaging, tissue engineering, environmental protection, satisfactory tumor diagnostic and therapeutic, because of distinguished properties compared with other artificial enzymes such as high biocompatibility, low toxicity, size dependent catalytic activities, large surface area for further bioconjugation or modification and also smart response to external stimuli. This review summarizes and highlights latest progress in applications of metal and metal oxide nanomaterials with enzyme/multienzyme mimicking activities. We cover the applications of sensing, cancer therapy, water treatment and anti-bacterial efficacy. We also put forward the current challenges and prospects in this research area, hoping to extension of this emerging field. In addition to therapeutic potential of nanozymes for disease prevention, their practical effects in diagnostics, to monitor the presence of SARS-CoV-2 and related biomarkers for future pandemics will be predicted.

Biomedical applications of metal–organic framework (MOF)-based nano-enzymes

In the present review, the types and activities of nanometer-sized enzymes are summarized, with recent progress of nanometer-sized enzymes in the field of biomedical detection.

Smartphone-based Fluoride-specific Sensor for Rapid and Affordable Colorimetric Detection and Precise Quantification at Sub-ppm Levels for Field Applications

Higher levels of fluoride (F^-) in groundwater constitute a severe problem that affects more than 200 million people spread over 25 countries. It is essential not only to detect but also to accurately quantify aqueous F^- to ensure safety. The need of the hour is to develop smart water quality testing systems that would be effective in location-based real-time water quality data collection, devoid of professional expertise for handling. We report a cheap, handheld, portable mobile device for colorimetric detection and rapid estimation of F^- in water by the application of the synthesized core-shell nanoparticles (near-cubic ceria@zirconia nanocages) and a chemoresponsive dye (xylenol orange). The nanomaterial has been characterized thoroughly, and the mechanism of sensing has been studied in detail. The sensor system is highly selective toward F^- and shows unprecedented sensitivity in the range of 0.1-5 ppm of F^-, in field water samples, which is the transition regime, where remedial measures may be needed. It addresses multiple issues expressed by indicator-based metal complexes used to determine F^- previously. Consistency in the performance of the sensing material has been tested with synthetic F^- standards, water samples from F^- affected regions, and dental care products like toothpastes and mouthwash using a smartphone attachment and by the naked eye. The sensor performs better than what was reported by prior works on aqueous F^- sensing.

Nanometal Oxides with Special Surface Physicochemical Properties to Promote Electrochemical Detection of Heavy Metal Ions

Heavy metal ions (HMIs) are one of the major environmental pollution problems currently faced. To monitor and control HMIs, rapid and reliable detection is required. Electrochemical analysis is one of the promising methods for on-site detection and monitoring due to high sensitivity, short response time, etc. Recently, nanometal oxides with special surface physicochemical properties have been widely used as electrode modifiers to enhance sensitivity and selectivity for HMIs detection. In this work, recent advances in the electrochemical detection of HMIs using nanometal oxides, which are attributed to specific crystal facets and phases, surficial defects and vacancies, and oxidation state cycle, are comprehensively summarized and discussed in aspects of synthesis, characterization, electroanalysis application, and mechanism. Moreover, the challenges and opportunities for the development and application of nanometal oxides with functional surface physicochemical properties in electrochemical determination of HMIs are presented.

Colorimetric determination of Pb2+ ions based on surface leaching of Au@Pt nanoparticles as peroxidase mimic

We report the first use of metallic nanozyme as colorimetric probe for Pb²⁺ determination. The method is based on the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanied by a decreased catalytic activity of the metallic nanozyme. To construct this colorimetric determination, the Pt deposition onto the AuNPs was carefully investigated and other experimental factors including kind of substrate and buffer were optimized. With increasing Pb²⁺ concentration, the catalytic activity of the Au@PtNPs decreased gradually. As a result, the blue color at 650 nm from the oxidation of 3,3',5,5'-tetramethylbenzidine by H₂O₂ faded gradually. A determination limit of 3.0 nM Pb²⁺ with a linear range from 20 to 800 nM was obtained. The assay demonstrated negligible response to common metal ions even at elevated concentrations. This colorimetric method was applied to the determination of Pb²⁺ ions spiked in lake water samples, and good recoveries (96.8-105.2%) were obtained. The above results indicate the potential application of metallic nanozymes in developing robust colorimetric assays. Graphical abstract Schematic representation of the surface leaching of Au@PtNP nanozyme by Pb²⁺-S₂O₃^2- ions, accompanying the decreased catalytic activity of the metallic nanozyme.

Fibrous strips decorated with cleavable aggregation-induced emission probes for visual detection of Hg2

The widespread contamination and high poisonousness have created significant concerns and thus demands for facile, rapid and selective monitoring of trace Hg²⁺. Inspired from the unique aggregation-induced emission (AIE) feature, in the current study, novel tetraphenylethylene (TPE) derivatives are prepared containing sulfonic groups for water solubility modulation and carboxyl dithioacetals for Hg²⁺ sensing. The TPE derivatives are grafted on electrospun fiber as test papers to initiate the AIE activities, while the Hg²⁺-specific cleavage of dithioacetal groups leads to the release of TPE derivatives and fluorescence turn-off. The decrease in the fluorescence intensities of fibrous mats could be fitted with Hg²⁺ levels for quantitative analysis, and the fibrous mats turn from green to bluish-green and then to blue in the presence of different Hg²⁺ levels. The limit of detection (LOD) reaches as low as 20 nM Hg²⁺, satisfying the threshold detection in drinking water, and the Hg²⁺ sensing indicates negligible interference from other metal ions and pH variations. The detected Hg²⁺ levels in lake water are consistent with the added amount with a recovery rate of over 98 %. It demonstrates a feasible strategy to integrate Hg²⁺-cleavable AIE probes on fibrous strips for real-time, highly specific and naked-eye detection of trace Hg²⁺.

Developing a toll-like receptor biosensor for Gram-positive bacterial detection and its storage strategies

Conditions to store toll-like receptor2/6 sensors and use them to detect bacterial analytes, including pathogen-associated molecular patterns and bacterial cultures.

Safranin O-functionalized cuboid mesoporous silica material for fluorescent sensing and adsorption of permanganate

A new safranin O-based chelating fluorophore coupled, dual-functionalized organic–inorganic hybrid material has been prepared for simultaneous MnO₄⁻ detection and adsorption in aqueous media and living organisms such as limnodrilus claparedianus and zebrafish.

Design of Multifunctional Fluorescent Hybrid Materials Based on SiO2 Materials and Core-Shell Fe3 O4 @SiO2 Nanoparticles for Metal Ion Sensing

Hybrid fluorescent materials constructed from organic chelating fluorescent probes and inorganic solid supports by covalent interactions are a special type of hybrid sensing platform that has gained much interest in the context of metal ion sensing applications owing to their excellent advantages, recyclability, and solubility/dispersibility in particular, as compared with single organic fluorescent molecules. In recent decades, SiO₂ materials and core-shell Fe₃ O₄ @SiO₂ nanoparticles have become important inorganic solid materials and have been used as inorganic solid supports to hybridize with organic fluorescent receptors, resulting in multifunctional fluorescent hybrid systems for potential applications in sensing and related research fields. Therefore, recent progress in various fluorescent-group-functionalized SiO₂ materials is reviewed, with a focus on mesoporous silica nanoparticles and core-shell Fe₃ O₄ @SiO₂ nanoparticles, as interesting fluorescent organic-inorganic hybrid materials for sensing applications toward essential and toxic metal ions. Selective examples of other types of silica/silicon materials, such as periodic mesoporous organosilicas, solid SiO₂ nanoparticles, fibrous silica spheres, silica nanowires, silica nanotubes, and silica hollow microspheres, are also mentioned. Finally, relevant perspectives of metal-ion-sensing-oriented silica-fluorescent probe hybrid materials are provided.

Nozzle-Jet-Printed Silver/Graphene Composite-Based Field-Effect Transistor Sensor for Phosphate Ion Detection

High concentration of dissolved phosphate ions is the main responsible factor for eutrophication of natural water bodies. Therefore, detection of phosphate ions is essential for evaluating water eutrophication. There is a need at large-scale production of real-time monitoring technology to detect phosphorus accurately. In this study, facile enzymeless phosphate ion detection is reported using a nozzle-jet-printed silver/reduced graphene oxide (Ag/rGO) composite-based field-effect transistor sensor on flexible and disposable polymer substrates. The sensor exhibits promising results in low concentration as well as real-time phosphate ion detection. The sensor shows excellent performance with a wide linear range of 0.005-6.00 mM, high sensitivity of 62.2 μA/cm²/mM, and low detection limit of 0.2 μM. This facile combined technology readily facilitates the phosphate ion detection with high performance, long-term stability, excellent reproducibility, and good selectivity in the presence of other interfering anions. The sensor fabrication method and phosphate detection technique yield low-cost, user-friendly sensing devices with less analyte consumption, which are easy to fabricate on polymer substrates on a large scale. Besides, the sensor has the capability to sense phosphate ions in real water samples, which makes it applicable in environmental monitoring.

An Anthracene Excimer Fluorescence Probe on Mesoporous Silica for Dual Functions of Detection and Adsorption of Mercury (II) and Copper (II) with Biological In Vivo Applications

Dual functional activity by the same organic-inorganic hybrid material toward selective metal ion detection and its adsorption has drawn more attraction in the field of sensing. However, most of the hybrid materials in the literature are either for sensing studies or adsorption studies. In this manuscript, a fluorescent active hybrid material SiO₂ @PBATPA is synthesized by covalent coupling of anthracene-based chelating ligand N,N'-(propane-1,3-diyl) bis(N-(anthracen-9-ylmethyl)-2-((3-(triethoxysilyl)propyl) amino) acetamide) (PBATPA) within the mesopores of newly synthesized cubic mesoporous silica. The synthetic strategy is designed to form an exclusively intramolecular excimer on a solid surface, which is then used as a sensory tool for selective detection of metal ions through fluorescence quenching by the destruction of excimer upon metal ion binding. The dual functions of sensing and adsorption studies show selectivity toward Hg²⁺ and Cu²⁺ among various metal ions with detection limits of 37 and 6 ppb, respectively, and adsorption capacities of 482 and 246 mg g^-1 , respectively. This material can be used as a sensory cum adsorbent material in real food samples and living organisms such as the brine shrimp Artemia salina without any toxic effects from the material.

A fully integrated passive microfluidic Lab-on-a-Chip for real-time electrochemical detection of ammonium: Sewage applications

The present work reports on the development of a new generation of Lab-on-a-chip (LOC) to perform in-situ and real-time potentiometric measurements in flowing water. The device consisted of two differentiated parts: a poly (dimethylsiloxane) (PDMS) microfluidic structure obtained by soft lithography and a fully integrated chemical sensing platform including four working microelectrodes, two reference microelectrodes and one counter microelectrode for detecting ammonium in a continuous mode. The performance of the device was evaluated following its potentiometric response when analyzing ammonium containing samples. As a key parameter, its time of response was compared to that of a commercially available electrical conductivity sensor used as reference sensor during tests in laboratory using flowing tap water and technical scale using flowing wastewater. As a result, the LOC showed a slope of 55 mV/decade, a limit of detection of 4·10^-5 M and a time of full response between 10 and 12 s. It was demonstrated that the device can provide fast and reliable data at real time when immersed in a laminar flow of water. Moreover, the test of robustness showed that it was still functional after immersion in sewage for at least 15 min. Besides, the LOC reported here can be helpful for a wide variety of flowing-water applications such as aqua culture outlets control, in-situ and continuous analysis of rivers effluents and sea waters monitoring among others.

Gold nanoparticles-based multifunctional nanoconjugates for highly sensitive and enzyme-free detection of E.coli K12

Immobilization of proteins on a biocompatible conductive interface is highly desirable for the fabrication of biosensors. In this study, a nanocomposite has been prepared by assembling well-distributed gold nanoparticles (AuNPs) on the surface of a polypyrrole-reduced graphene oxide (PPy-rGO) composite through electrostatic adsorption. This serves as a platform for immobilization of a capture antibody, which was conjugated onto the ferrocene doped polypyrrole-gold nanoparticles (PPy@Fc/AuNPs) composite. The design and performance of the biosensor was tested against detection of a whole-cell bacteria E. coli K12. This nanocomposite has a high surface area, good conductivity and biocompatibility, which is shown to be very suitable for enzyme-free detection of this bacteria. Results show excellent analytical performance with a linear range from 1.0 × 10¹ to 1.0 × 10⁷ CFU mL^-1 and a low detection limit of 10 CFU mL^-1. The sensor has high selectivity, excellent reproducibility, and good stability.

Highly Sensitive and Selective Colorimetric Detection of Methylmercury Based on DNA Functionalized Gold Nanoparticles

A new colorimetric detection of methylmercury (CH₃Hg⁺) was developed, which was based on the surface deposition of Hg enhancing the catalytic activity of gold nanoparticles (AuNPs). The AuNPs were functionalized with a specific DNA strand (H_T7) recognizing CH₃Hg⁺, which was used to capture and separate CH₃Hg⁺ by centrifugation. It was found that the CH₃Hg⁺ reduction resulted in the deposition of Hg onto the surface of AuNPs. As a result, the catalytic activity of the AuNPs toward the chromogenic reaction of 3,3,5,5-tetramethylbenzidine (TMB)-H₂O₂ was remarkably enhanced. Under optimal conditions, a limit of detection of 5.0 nM was obtained for CH₃Hg⁺ with a linear range of 10–200 nM. We demonstrated that the colorimetric method was fairly simple with a low cost and can be conveniently applied to CH₃Hg⁺ detection in environmental samples.

Optofluidic Technology for Water Quality Monitoring

Water quality-related incidents are attracting attention globally as they cause serious diseases and even threaten human lives. The current detection and monitoring methods are inadequate because of their long operation time, high cost, and complex process. In this context, there is an increasing demand for low-cost, multiparameter, real-time, and continuous-monitoring methods at a higher temporal and spatial resolution. Optofluidic water quality sensors have great potential to satisfy this requirement due to their distinctive features including high throughput, small footprint, and low power consumption. This paper reviews the current development of these sensors for heavy metal, organic, and microbial pollution monitoring, which will breed new research ideas and broaden their applications.

Zwitterionic peptide-capped gold nanoparticles for colorimetric detection of Ni2+

Zwitterionic nanoparticles are typically utilized as nanoprobes and delivery vehicles in nanomedicine and therapeutics due to their resistance to interferences. Their high stability also shows great potential to be applied in sensing applications. Here, we report a selective, sensitive and rapid colorimetric sensing of nickel ions (Ni²⁺) using zwitterionic polypeptide, EKEKEKPPPPC (EK)₃, capped gold nanoparticles (AuNP-(EK)₃). By taking advantage of the alternate carboxylic (-COOH)/amine (-NH₂) groups, the zwitterionic peptide can function dually by being able to sense metal ions and maintain colloidal stability. Ni²⁺ can trigger the aggregation of the AuNP-(EK)₃ nanoprobe, which results in a red-to-purple color change of the AuNP-(EK)₃ solution. Our 40 nm AuNP-(EK)₃ nanoprobe can detect Ni²⁺ as low as 34 nM within 15 min with a linear range of 60-160 nM, and is stable in soil, urine and water samples. We demonstrate that the aggregation mechanism of the nanoprobe is due to the interactions between the -NH₂ group of glutamic acid at the N-terminus of the peptide and Ni²⁺, and the aggregation process is reversible. Furthermore, the slight modification of two amino acid sequences at the N-terminus allows the nanoprobe to retain its stability, even in a high ionic strength medium. We believe that by adjusting or extending the peptide sequences, new metal ion selective peptides could be created.