Green Formation of Robust Supraparticles for Cargo Protection and Hazards Control in Natural Environments

Benchmarking the Humidity-Dependent Mechanical Response of (Nano)fibrillated Cellulose and Dissolved Polysaccharides as Sustainable Sand Amendments

Soil quality is one of the main limiting factor in the development of the food sector in arid areas, mainly due to its poor mechanics and lack of water retention. Soil's organic carbon is nearly absent in arid soils, though it is important for water and nutrient transport, to soil mechanics, to prevent erosion, and as a long-term carbon sink. In this study, we evaluate the potential benefits that are brought to inert sand by the incorporation of a range of, mainly, cellulosic networks in their polymeric or structured (fiber) forms, analogously to those found in healthy soils. We explore the impact of a wide range of nonfood polysaccharide-based amendments, including pulp fibers, nanocellulose, cellulose derivatives, and other readily available polysaccharide structures derived from arthropods (chitosan) or fruit peels (pectin) residues. A practical methodology is presented to form sand-polymer composites, which are evaluated for their soil mechanics as a function of humidity and the dynamics of their response to water. The mechanics are correlated to the network of polymers formed within the pores of the sandy soil, as observed by electron microscopy. The response to water is correlated to both the features of the network and the individual polysaccharides' physicochemical features. We expect this work to provide a rapid and reproducible methodology to benchmark sustainable organic amendments for arid soils.

Sodium alginate-carboxymethyl chitosan hydrogels loaded with difenoconazole for pH-responsive release to control wheat crown rot

Increasing concern about environmental pollution has driven the development of controlled release formulations for agrochemicals. Due to the advantages of degradability and responsiveness to environmental stimuli, polysaccharide-based hydrogel is an ideal carrier for agrochemicals controlled release. In this study, a method-easy polysaccharide hydrogel for controlled release of difenoconazole (DZ) was prepared with sodium alginate (SA) and carboxymethyl chitosan (CMCS). Due to its three-dimensional crosslinked mesh structure, the prepared hydrogels (CSDZ) showed an agrochemical load capacity of 9.03 % and an encapsulation efficiency of 68.64 %. The release rate is faster in alkaline solution, followed by neutral solution, and slowest in an acid environment, which is consistent with the swelling behavior. Furthermore, leaching studies showed that CSDZ hydrogels have excellent protective properties for encapsulated agrochemicals. Compared with technical DZ, the results of in vitro and pot antifungal testing showed that CSDZ had a better control effect against wheat crown rot (Fusarium pseudograminearum). Safety assessment studies indicated that CSDZ hydrogels exhibit good biocompatibility on nontargeted organisms (Daphnia magna, zebrafish and Eisenia fetida) and wheat. This study aims to provide a potentially promising approach for the preparation and application of biocompatible polysaccharide-based hydrogels for agrochemical-controlled release in sustainable disease management.

Amphiphilicity-Driven Small Alcohols Regulate the Flexibility of Pesticide-Loaded Microcapsules for Better Foliar Adhesion and Utilization

The foliar loss of pesticides causes serious utilization decline and environmental risk. On the basis of biomimetics, pesticide-loaded microcapsules (MCs) with spontaneous deformation on foliar micro/nanostructures, like the snail suction cup, are prepared by interfacial polymerization. By controlling the usage or types of small alcohols in the MC preparation system, the flexibility of MCs is tunable. Through the investigation of emulsions and MC structures, we discover that the migration and distribution of small alcohols driven by amphiphilicity affect the process of interfacial polymerization between polyethylene glycol and 4,4-methylenediphenyl diisocyanate. By hydrophobic modification of the polymer and competition for oil monomers of small alcohols, the thickness and compactness of shells are reduced, whereas the density of the core is increased. As a result of the regulation in structures, the flexibility of MCs is improved significantly. In particularly, the MCs-N-pentanol (0.1 mol kg^-1) with the best flexibility show strong scouring resistance on varied foliar structures, sustained release property on the air/solid interface, and persistent control effect against foliar diseases. The pesticide-loaded soft MCs provide an effective way to improve pesticide foliar utilization.

Supraparticles as slow-release fertiliser in seedling potential growth of Eucalyptus urograndis and greenhouse gas flux impacts

Slow-release urea fertilisers have been shown to present acceptable values for plant yield and mitigate the harmful effect of soil emission gases. This study synthesises a slow-release fertiliser containing fumed-nanosilica, nanofibrillated cellulose as well as sodium alginate as a urea carrier to analyse the growth parameters of Eucalyptus urograndis seedlings and potential emission of soil gases, N₂O, CH₄, CO₂ and ammonia volatilisation. The developed supraparticles, arranged layered nanoparticle structure, presented a decrease in the normal nitrogen content of urea of 19%, which is attributed to the binding of this element. A good electrostatic interaction between the elements was confirmed by the FTIR with 20% of nitrogen content from its chemical composition and an increase in thermal degradation of the main components when synthesised. The profile of urea release presented to be as first-order with 85% of this compound was released only after 60 days. These characteristics led to statistically increased growth of Eucalyptus seedlings compared to the controls, which improves with higher dosages of urea. Values of biomass and characteristics of the plant were used for principal component analysis which resulted in good cluster formation based on the upward concentration of urea added to the plant. Nevertheless, flux gases were statistically higher for certain time periods on lower urea particle concentration, while increased concentration presented N₂O emissions within standard rates with no significant variation in the other measured gases, which was attributed to the soil microbial targeted consumption. Therefore, this material can be beneficial in the agriculture industry.

Highly Efficient and Controlled Fabrication of Supraparticles by Leidenfrost Phenomenon

Supraparticles (SPs) are agglomerates of smaller particles, which show promising applications in catalysis, sensing, and so forth. Preparation of SPs with controlled sizes, components, and structures in an efficient, scalable, and environmentally friendly way has become an urgent demand for the development of SPs. Herein, a method to fabricate SPs based on the Leidenfrost phenomenon is described. By dropping a nano-/microparticle dispersion on a metal plate at the Leidenfrost temperature (T_LF) or higher, the solvent evaporates quickly, and SPs can be formed within 1 min. To understand the influence of various factors on the properties of SPs, and also to optimize the fabrication of SPs, the effects of metal surface roughness and primary particle concentration on T_LF were carefully observed. Plates with a higher roughness as well as a higher primary particle concentration could trigger a lower T_LF. Combining the regulation of composition and volume of the droplets, SPs with different sizes, compositions, and structures were precisely fabricated. Furthermore, highly porous titanium dioxide (TiO₂) SPs with enhanced photocatalytic performance were fabricated via this method, showing the merits of the method in practical applications. This simple, efficient, and green method provides a new approach for controlled and large-scale fabrication of SPs with various functions.

A pH Dual-Responsive Multifunctional Nanoparticle Based on Mesoporous Silica with Metal-Polymethacrylic Acid Gatekeeper for Improving Plant Protection and Nutrition

Integrating pesticides and mineral elements into a multi-functional stimuli-responsive nanocarrier can have a synergistic effect on protecting plants from pesticides and the supply of nutrients. Herein, a pH dual-responsive multifunctional nanosystem regulated by coordination bonding using bimodal mesoporous silica (BMMs) as a carrier and coordination complexes of ferric ion and polymethacrylic acid (PMAA/Fe³⁺) as the gatekeeper was constructed to deliver prochloraz (Pro) for the smart treatment of wilt disease (Pro@BMMs−PMAA/Fe³⁺). The loading capacity of Pro@BMMs−PMAA/Fe³⁺ nanoparticles (Nps) was 24.0% and the “PMMA/Fe³⁺” complexes deposited on the BMMs surface could effectively protect Pro against photodegradation. The nanoparticles possessed an excellent pH dual-responsive release behavior and better inhibition efficacy against Rhizoctonia solani. Fluorescence tracking experiments showed that Nps could be taken up and transported in fungi and plants, implying that non-systemic pesticides could be successfully delivered into target organisms. Furthermore, BMMS−PMAA/Fe³⁺ nanocarriers could effectively promote the growth of crop seedlings and had no obvious toxicological influence on the cell viability and the growth of bacteria. This study provides a novel strategy for enhancing plant protection against diseases and reducing the risk to the environment.

Superstable Wet Foams and Lightweight Solid Composites from Nanocellulose and Hydrophobic Particles

Colloids are suitable options to replace surfactants in the formation of multiphase systems while simultaneously achieving performance benefits. We introduce synergetic combination of colloids for the interfacial stabilization of complex fluids that can be converted into lightweight materials. The strong interactions between high aspect ratio and hydrophilic fibrillated cellulose (CNF) with low aspect ratio hydrophobic particles afford superstable Pickering foams. The foams were used as a scaffolding precursor of porous, solid materials. Compared to foams stabilized by the hydrophobic particles alone, the introduction of CNF significantly increased the foamability (by up to 350%) and foam lifetime. These effects are ascribed to the fibrillar network formed by CNF. The CNF solid fraction regulated the interparticle interactions in the wet foam, delaying or preventing drainage, coarsening, and bubble coalescence. Upon drying, such a complex fluid was transformed into lightweight and strong architectures, which displayed properties that depended on the surface energy of the CNF precursor. We show that CNF combined with hydrophobic particles universally forms superstable complex fluids that can be used as a processing route to synthesize strong composites and lightweight structures.

Recent Advances on Lignocellulosic-Based Nanopesticides for Agricultural Applications

Controlled release systems of agrochemicals have been developed in recent years. However, the design of intelligent nanocarriers that can be manufactured with renewable and low-cost materials is still a challenge for agricultural applications. Lignocellulosic building blocks (cellulose, lignin, and hemicellulose) are ideal candidates to manufacture ecofriendly nanocarriers given their low-cost, abundancy and sustainability. Complexity and heterogeneity of biopolymers have posed challenges in the development of nanocarriers; however, the current engineering toolbox for biopolymer modification has increased remarkably, which enables better control over their properties and tuned interactions with cargoes and plant tissues. In this mini-review, we explore recent advances on lignocellulosic-based nanocarriers for the controlled release of agrochemicals. We also offer a critical discussion regarding the future challenges of potential bio-based nanocarrier for sustainable agricultural development.

Controlling supraparticle shape and structure by tuning colloidal interactions

HYPOTHESIS

Assembly of colloids in drying colloidal suspensions on superhydrophobic surface is influenced by the colloidal interactions, which determine the shape and interior structure of the assembled supraparticle. The introduction of salt (electrolyte) into the assembly system is expected to influence the colloid interactions and packing during the evaporation process. Hence, both the outer shape and internal structure of supraparticles should be controlled by varying salt concentrations.

EXPERIMENTS

Suspensions of electrostatically stabilized polystyrene particles with specified salt concentrations were chosen as model systems to conduct the evaporation on a superhydrophobic surface. A systematic study was performed by regulating the concentration and valency of salt. The morphology and interior of supraparticles were carefully characterized with electron scanning microscopy, while the colloidal interaction was established using colloidal probe atomic force microscopy.

FINDINGS

Supraparticles displayed a spherical-to-nonspherical shape change due to the addition of salts. The extent of crystallization depended on salt concentration. These changes in shape and structure were correlated with salt-dependent single colloid interaction forces, which were not previously investigated in detail in radially symmetric evaporation geometry. Our findings are crucial for understanding assembly behavior during the drying process and offer guidance for preparing complex supraparticles to meet specific applications requirement.

Regioselective and water-assisted surface esterification of never-dried cellulose: nanofibers with adjustable surface energy

A new regioselective route is introduced for surface modification of biological colloids in the presence of water. Taking the case of cellulose nanofibers (CNFs), we demonstrate a site-specific (93% selective) reaction between the primary surface hydroxyl groups (C6-OH) of cellulose and acyl imidazoles. CNFs bearing C6-acetyl and C6-isobutyryl groups, with a degree of substitution of up to 1 mmol g-1 are obtained upon surface esterification, affording CNFs of adjustable surface energy. The morphological and structural features of the nanofibers remain largely unaffected, but the regioselective surface reactions enable tailoring of their interfacial interactions, as demonstrated in oil/water Pickering emulsions. Our method precludes the need for drying or exchange with organic solvents for surface esterification, otherwise needed in the synthesis of esterified colloids and polysaccharides. Moreover, the method is well suited for application at high-solid content, opening the possibility for implementation in reactive extrusion and compounding. The proposed acylation is introduced as a sustainable approach that benefits from the presence of water and affords a high chemical substitution selectivity.

Priming with Nanoscale Materials for Boosting Abiotic Stress Tolerance in Crop Plants

Seed priming is a cost-effective, practical, environmental, and farmer-friendly method to improve seed germination that can potentially increase the growth and yield of plants. The priming process enhances various physiological and biochemical mechanisms of defense and empowers the seeds or seedlings to overcome different environmental stresses. However, under critical circumstances, plants are hindered from absorbing specific chemical priming reagents owing to their larger size, molecular structure, or lack of carriers. Therefore, nanoscale materials having exceptional physiochemical properties and a large surface/volume ratio are expected to be better absorbed by the seeds/seedlings as priming agents in comparison to bulk chemicals and can trigger enhanced molecular interactions at the cellular level. Further, the flexibility in altering the surface chemical properties of the nanomaterials can facilitate better interaction with the seeds/seedlings while inhibiting the wastage of priming agents. In this review, we have systematically discussed the potentiality of various nanostructured materials as priming agents in alleviating the adverse effects of various abiotic stresses, viz., drought, salinity, high temperature, cold temperature, and heavy metals, by studying the growth parameters and physiological and biochemical response of various crop plants subjected to these stress conditions. Also, we have highlighted the molecular mechanism and activation of genes involved in enabling abiotic stress tolerance in plants after being primed with nanostructured materials.

Stimuli-responsive Ca-alginate-based photothermal system with enhanced foliar adhesion for controlled pesticide release

For minimizing volatilization and leaching of pesticides, and enhancing their residence time on crop surfaces, we synthesized and characterized a novel intelligent pesticide delivery system. Therein, imidacloprid (IMI) was adsorbed by polydopamine modified kaolin (PK) with high adsorption property through hydrogen bonds. Ca-alginate was used as a structural matrix of the system and a protective shell to hinder the pesticide burst release from PK, and endowed the system with unique pH-sensitive property for IMI release. The amino silicone oil (ASO) coating could bind with the waxy layer of crop leaves by the theory of "similarity-intermiscibility", which increased the adhesion of composite on crop leaves. Moreover, by the excellent light-sensitive property of detonation nanodiamond (DND) and temperature-responsive performance of poly(N-isopropylacrylamide) (PNIPAm), the release of IMI from the functional system could be adjusted by sunlight. Besides, the composite displayed high control efficacy. This novel composite can promote the targeting ability and utilization efficiency of pesticides, thus having a huge potential application prospect in agriculture.

Lignin-Based Porous Supraparticles for Carbon Capture

Multiscale carbon supraparticles (SPs) are synthesized by soft-templating lignin nano- and microbeads bound with cellulose nanofibrils (CNFs). The interparticle connectivity and nanoscale network in the SPs are studied after oxidative thermostabilization of the lignin/CNF constructs. The carbon SPs are formed by controlled sintering during carbonization and develop high mechanical strength (58 N·mm^-3) and surface area (1152 m²·g^-1). Given their features, the carbon SPs offer hierarchical access to adsorption sites that are well suited for CO₂ capture (77 mg CO₂·g^-1), while presenting a relatively low pressure drop (∼33 kPa·m^-1 calculated for a packed fixed-bed column). The introduced lignin-derived SPs address the limitations associated with mass transport (diffusion of adsorbates within channels) and kinetics of systems that are otherwise based on nanoparticles. Moreover, the carbon SPs do not require doping with heteroatoms (as tested for N) for effective CO₂ uptake (at 1 bar CO₂ and 40 °C) and are suitable for regeneration, following multiple adsorption/desorption cycles. Overall, we demonstrate porous SP carbon systems of low cost (precursor, fabrication, and processing) and superior activity (gas sorption and capture).

Engineering Lignin Nanomicroparticles for the Antiphotolysis and Controlled Release of the Plant Growth Regulator Abscisic Acid

Lignin is the most abundant aromatic biopolymer in nature and is a major byproduct from the paper industry. The unlocking of lignin's potential for high-value applications has gained increasing attention in recent years. In this study, alkali lignin (AL), with a rigid conjugated structure and amphiphilic property, was used as a sustainable and eco-friendly encapsulation material for the protection and controlled release of photosensitive abscisic acid (ABA), an important and widely used plant growth regulator. Cetyltrimethylammonium bromide (CTAB) was used to induce the formation of AL-CTAB nanomicroparticles by self-assembly. The size and morphology of AL-CTAB particles were modified by changing the AL concentration and the dispersion agent. AL (0.3 M) dissolved in tetrahydrofuran could form a uniform size (300 nm) of particles with a regular spherical structure. Subsequently, ABA was loaded on the prepared nanomicroparticles to synthesize the capsule formulation of ABA@AL-CTAB. The controlled-release behavior and the antiphotolysis performance as well as the thermal stability of ABA@AL-CTAB were proved to be superior. Lasting inhibition of Arabidopsis and rice seed germination by ABA@AL-CTAB under light irradiations implied protection of ABA from photolysis. In addition, ABA@AL-CTAB could effectively regulate plant stomata, thereby increasing plant drought resistance. Overall, lignin is suitable for the preparation of agrochemical formulations with excellent controlled release and antiphotolysis performances.

Tuning the Porosity of Supraparticles

Supraparticles consisting of nano- or microparticles have potential applications as, for example, photonic crystals, drug carriers, or heterogeneous catalysts. To avoid the use of solvent or processing liquid, one can make supraparticles by evaporating droplets of aqueous suspensions from super-liquid-repellent surfaces. Herein, a method to adjust the porosity of supraparticles is described; a high porosity is desired, for example, in catalysis. To prepare highly porous TiO₂ supraparticles, polymer nanoparticles are co-dispersed in the suspension. Supraparticles are formed through evaporation of aqueous suspension droplets on superamphiphobic surfaces followed by calcination of the sacrificial polymer particles. The increase of porosity of up to 92% resulted in enhanced photocatalytic activity while maintaining sufficient mechanical stability.

Lignin Particles for Multifunctional Membranes, Antioxidative Microfiltration, Patterning, and 3D Structuring

We introduce a new type of particle-based membrane based on the combination of lignin particles (LPs) and cellulose nanofibrils (CNF), the latter of which are introduced in small volume fractions to act as networking and adhesive agents. The synergies that are inherent to lignin and cellulose in plants are re-engineered to render materials with low surface energy (contact angle measurements) and can be rendered water-resistant with the aid of wet-strength agents (WSAs). Importantly, they are most suitable for antioxidative separation (ABTS^•+ radical inhibition): membranes with uniform porous structures (air permeability and capillary flow porosimetry) allow effluent oxidation at 95 mL/cm², demonstrating, for the first time, the use of unmodified lignin particles in flexible membranes for active microfiltration. Moreover, the membranes are found to be nonfouling (protein adhesion and activity rate). The inherent properties of lignin, including UV radiation blocking capacity (UV transmittance analysis) and reduced surface energy, are further exploited in the development of tailorable and self-standing architectures that are almost entirely comprised of nonbonding LP (solids content as high as 92 w/w%). Despite such composition, the materials develop high toughness (oscillatory dynamic mechanical analysis), owing to the addition of minor amounts of CNF. Multifunctional materials based on thin films (casting), 3D structures (molding), and patterned geometries (extrusion deposition) are developed as a demonstration of the potential use of lignin particles as precursors of new material generation. Remarkably, our observations hold for spherical LPs since a much poorer performance was observed after using amorphous powder, indicating the role of size and shape in related applications.

Nanocellulose/bioactive glass cryogels as scaffolds for bone regeneration

A major challenge exists in the preparation of scaffolds for bone regeneration, namely, achieving simultaneously bioactivity, biocompatibility, mechanical performance and simple manufacturing. Here, cellulose nanofibrils (CNF) are introduced for the preparation of scaffolds taking advantage of their biocompatibility and ability to form strong 3D porous networks from aqueous suspensions. CNF are made bioactive for bone formation through a simple and scalable strategy that achieves highly interconnected 3D networks. The resultant materials optimally combine morphological and mechanical features and facilitate hydroxyapatite formation while releasing essential ions for in vivo bone repair. The porosity and roughness of the scaffolds favor several cell functions while the ions act in the expression of genes associated with cell differentiation. Ion release is found critical to enhance the production of the bone morphogenetic protein 2 (BMP-2) from cells within the fractured area, thus accelerating the in vivo bone repair. Systemic biocompatibility indicates no negative effects on vital organs such as the liver and kidneys. The results pave the way towards a facile preparation of advanced, high performance CNF-based scaffolds for bone tissue engineering.

Accounting for Substrate Interactions in the Measurement of the Dimensions of Cellulose Nanofibrils

Mechanically fibrillated cellulose nanofibrils (CNFs) have attracted special attention as building blocks for the development of advanced materials and composites. A correlation exists between CNF morphology and the properties of the materials they form. However, this correlation is often evaluated indirectly by process-centered approaches or by accessing a single dimensionality of CNFs adsorbed on solid supports. High-resolution imaging is currently the best approach to describe the morphological features of nanocelluloses; nevertheless, adsorption effects need to be accounted for. For instance, possible deformations of the CNFs arising from capillary forces and interactions with the substrate need to be considered in the determination of their cross-sectional dimensions. By considering soft matter imaging and adsorption effects, we provide evidence of the deformation of CNFs upon casting and drying. We determine a substantial flattening associated with the affinity of CNFs with the substrate corresponding to a highly anisotropic cross-sectional geometry (ellipsoidal) in the dried state. Negative-contrast scanning electron microscopy is also introduced as a new method to assess the dimensions of the CNFs. The images obtained by the latter, a faster imaging method, were correlated with those from atomic force microscopy. The cross-sectional area of the CNF is reconstructed by cross-correlating the widths and heights obtained by the two techniques.

Slow delivery of biocide from nanostructured, microscaled, particles reduces its phytoxicity: A model investigation

Nano-engineered delivery systems have emerged as possible solutions for more efficient pest management in agriculture. Likewise for nanostructured drug delivery systems (DDS) in medicine, the use of biocide delivery systems (BDS) brought concerns on their toxicology on non-targeted organisms. Plants, for instance, are the foundation of the ecosystem, acting as primary actor in the food chain and is associated with the whole biodiversity, being strictly related to human health. This is a very important consideration to fully understand the benefits of using delivery systems for crop protection and production. Herein, a biocide delivery system was prepared by loading nanostructured, microscaled, biogenic silica particles with thymol, a known phytotoxicant. The resulting system contains 120 mg of thymol per gram of silica and displays slow release features. The Allium cepa bioassay was chosen to demonstrate how the toxicity and cellular damages induced by thymol can be significantly reduced through a slow, controlled, release strategy. The lower mobility of the reference particles associated with slow-delivery features reduced the toxicity and cellular damages caused by thymol in the plant genetic model.

Amphiphilic Cellulose Nanocrystals for Enhanced Pickering Emulsion Stabilization

Sulfated cellulose nanocrystals (CNC) with high surface charge density are inadequate for stabilizing oil-water emulsions, which limits their applications as interfacial stabilizers. We performed end-group modification by introducing hydrophobic chains (polystyrene) to CNC. Results showed that the modified CNC are more effective in emulsifying toluene and hexadecane than pristine CNC. Various parameters were investigated, such as concentration of particles, electrolytes, and polarity of solvents on the characteristics of the emulsions. This study provides strategies for the modification of cellulose nanocrystals to yield amphiphilic nanoparticles that enhance the stability of emulsions. Such systems, bearing biocompatible and environmentally friendly characteristics, are attractive for use in a wide range of industries spanning food, biomedicine, pharmaceuticals, cosmetics, and petrochemicals.