Amorphous Intermediate Derivative from ZIF-67 and Its Outstanding Electrocatalytic Activity

Regulating coordination environment in metal-organic Framework@Cuprous oxide Core-Shell catalyst for Promoting electrocatalytic oxygen evolution reaction

As a kind of promising oxygen evolution reaction (OER) catalysts, metal-organic frameworks (MOF) are often constrained by their inherent poor electroconductivity and structural instability. In this study, we developed a mono-dispersed zeolitic imidazolate framework-67@cuprous oxide (ZIF-67@Cu2O) core-shell catalyst via in-situ growth method for highly efficient alkaline OER. The ZIF-67@Cu2O shows an excellent OER activity with a low overpotential of 254 mV at 10 mA cm-2 and Tafel slope of 87.9 mV·dec-1 in 1.0 M KOH. Furthermore, the ZIF-67@Cu2O also shows a high turnover frequency (TOF) of 0.166 s-1 at 1.60  V vs. RHE and long-term stability for 160 h at a high current density of 100 mA cm-2. The unique core-shell structure with the Cu2O core linked with ZIF-67 shell through interfacial di-oxygen bridge improves the structural stability, enhances the charge transfer, and provides more active sites. Moreover, the interfacial coordination structure was regulated from Co-N4 to Co-N2O2 which elevates the valence of Co sites and optimizes the adsorption free energy of oxygen-containing intermediates, thus improving the electrocatalytic OER performance. This work could propose the way for designing novel MOF-based nanomaterials and developing desirable and robust heterogeneous OER catalysts.

High-Valence Co Stabilized by In-Situ Growth of ZIF-67 on NiCo-LDH for Enhanced Performance in Oxygen Evolution Reaction

The application of metal-organic frameworks (MOFs) in the electro-catalysis of heterogeneous structures is limited by the problems of low electrical conductivity and poor mechanical strength due to the complex synthesis process, although their high specific surface area and controllable structure. In this study, a method involving metal precipitation and ligand reaction is used during the electrochemical corrosion of hydroxides/oxy-hydroxides to obtain ZIF-67 in situ. The in situ growth technology not only effectively addresses the bonding strength and material conductivity challenges in the heterostructure between MOFs and the substrate but also enhances the catalyst's surface area and activity. Additionally, the exposure and protection of Co4+ by ZIF-67 contribute to the electrocatalyst's performance, demonstrating a low overpotential (η100) of 293 mV, a Tafel slope of 25.8 mV dec-1, and a charge transfer resistance of 3.9 Ω, with long-term robustness proven in continuous stability test exceeding 75 000 s under the superhigh current density of 500 mA cm-2. This work on binder-free in situ growth of MOFs not only provides relevant theoretical insights and experimental experience for cost-effective and controllable production of MOF-based catalysts but also offers ideas for the development of future electrocatalysts by exploring the exposure and protection of active site using MOFs materials.

Modulating Silver Performance in Electrocatalytic Oxidation of HCHO via SMSI between Ag-Co3O4 Interfaces

The replacement of oxygen evolution reactions with organic molecule oxidation reactions to enable energy-efficient hydrogen production has been a subject of interest. However, further reducing reaction energy consumption and releasing hydrogen from organic molecules continue to pose significant challenges. Herein, a strategy is proposed to produce hydrogen and formic acid from formaldehyde using Ag/Co3O4 interface catalysts at the anode. The key to improving the performance of Ag-based catalysts for formaldehyde oxidation lies in the strong SMSI achieved through the well-designed "spontaneous redox reaction" between Ag and Co3O4 precursors. Nano-sized Ag particles are uniformly dispersed on Co3O4 nanosheets, and electron-deficient Agδ+ are formed by the SMSI between Ag and Co3O4. Ag/Co3O4 demonstrates exceptional formaldehyde oxidation activity at low potentials of 0.32 V versus RHE and 0.65 V versus RHE, achieving current densities of 10 and 100 mA cm-2, respectively. The electrolyzer "Ag/Co3O4||20% Pt/C" achieves over 195% hydrogen efficiency and over 98% formic acid selectivity, maintaining stable operation for 60 hours. This work not only presents a novel approach to precisely modulate Ag particle size and interface electronic structure via SMSI, but also provides a promising approach to efficient and energy-saving hydrogen production and the transformation of harmful formaldehyde.

Stabilizing Ni2+ in Hollow Nano MOF/Polymetallic Phosphides Composites for Enhanced Electrochemical Performance in 3D-Printed Micro-Supercapacitors

Polymetallic phosphides exhibit favorable conductivities. A reasonable design of nano-metal-organic frame (MOF) composite morphologies and in situ introduction of polymetallic phosphides into the framework can effectively improve electrolyte penetration and rapid electron transfer. To address existing challenges, Ni, with a strong coordination ability with N, is introduced to partially replace Co in nano-Co-MOF composite. The hollow nanostructure is stabilized through CoNi bimetallic coordination and low-temperature controllable polymetallic phosphide generation rate. The Ni, Co, and P atoms, generated during reduction, effectively enhance electron transfer rate within the framework. X-ray absorption fine structure (XAFS) characterization results further confirm the existence of Ni-N, Ni-Ni, and Co-Co structures in the nanocomposite. The changes in each component during the charge-discharge process of the electrochemical reactions are investigated using in situ X-ray diffraction (XRD). Theoretical calculations further confirm that P can effectively improve conductivity. VZNPGC//MXene MSCs, constructed with active materials derived from the hollow nano MOF composites synthesized through the Ni2+ stabilization strategy, demonstrate a specific capacitance of 1184 mF cm-2, along with an energy density of 236.75 µWh cm-2 (power density of 0.14 mW cm-2). This approach introduces a new direction for the synthesis of highly conductive nano-MOF composites.

Simple synthesis of peanut shell-like MoCoFe-HO@CoMo-LDH for efficient alkaline oxygen evolution reaction

Due to the depletion of fossil energy on earth, it is crucial to develop resource rich and efficient non-precious metal electrocatalysts for oxygen evolution reaction (OER). Herein, we synthesized an efficient and economical electrocatalyst using a simple self-assembly strategy. Firstly, rod-shaped MIL-88A was synthesized by hydrothermal method. Then, the surface of MIL-88A was functionalized and encapsulated in zeolitic imidazolate framework-67 (ZIF-67) by hydrothermal method. The combination of MIL-88A and ZIF-67 resulted in a slight ion-exchange reaction between Co2+ and the surface of MIL-88A to generate CoFe-LDH@ZIF-67 core-shell structure. Afterwards, in the presence of Mo6+, ZIF-67 was converted into CoMo-nanocages through ion-exchange reactions, forming a core-shell structure of MoCoFe hydr (oxy) oxide@CoMo-LDH (MoCoFe-HO@CoMo-LDH). Due to the advantages of core-shell structure and composition, this material exhibits excellent OER characteristics, with a small Tafel slope (45.11 mV dec-1) and low overpotential (324 mV) at 10 mA cm-2. It exhibits good stability in alkaline media. This research work provides a novel approach for the development of efficient and economical non-precious metal electrocatalysts.

Activation of peroxymonosulfate with ZIF-67-derived Co/N-doped porous carbon nanocubes for the degradation of Congo red dye

In this study, porous carbon nanocubes encapsulated magnetic metallic Co nanoparticles (denoted as Co@N-PCNC) was prepared via pyrolyzing ZIF-67 nanocubes precursor at 600 °C and characterized by various technologies. It was used to activate peroxymonosulfate (PMS) to degrade Congo red (CR) dye efficiently. Over 98.45% of 50 mg L-1 CR was degraded using 0.033 mM PMS activated by 75 mg L-1 Co@N-PCNC within 12 min. The free radical quenching experiments were performed to reveal the nature of the reactive oxygen species radicals generated throughout the catalytic oxidation of CR. The effects of common inorganic anions and the water matrix on CR removal were studied. Moreover, the results of the kinetic study revealed the suitability of the pseudo-first-order and Langmuir-Hinshelwood kinetic models for illustrating CR degradation using the Co@N-PCNC/PMS system. Ultimately, the Co@N-PCNC displayed good operational stability, and after five cycles, the CR removal rate can still maintain over 90% after 12 min.

Graphene and MOF Assembly: Enhanced Fabrication and Functional Derivative via MOF Amorphization

The integration of graphene and metal-organic frameworks (MOFs) has numerous implications across various domains, but fabricating such assemblies is often complicated and time-consuming. Herein, a one-step preparation of graphene-MOF assembly is presented by directly impregnating vertical graphene (VG) arrays into the zeolitic imidazolate framework (ZIF) precursors under ambient conditions. This approach can effectively assemble multiple ZIFs, including ZIF-7, ZIF-8, and ZIF-67, resulting in their uniform dispersion on the VG with adjustable sizes and shapes. Hydrogen defects on the VG surface are critical in inducing such high-efficiency ZIF assembly, acting as the reactive sites to interact with the ZIF precursors and facilitate their crystallisation. The versatility of VG-ZIF-67 assembly is further demonstrated by exploring the process of MOF amorphization. Surprisingly, this process leads to an amorphous thin-film coating formed on VG (named VG-IL-amZIF-67), which preserves the short-range molecular bonds of crystalline ZIF-67 while sacrificing the long-range order. Such a unique film-on-graphene architecture maintains the essential characteristics and functionalities of ZIF-67 within a disordered arrangement, making it well-suited for electrocatalysis. In electrochemical oxygen reduction, VG-IL-amZIF-67 exhibits exceptional activity, selectivity, and stability to produce H2O2 in acid media.

Rational Design of a Necklace-like ZIF-67/Poly(vinylidene fluoride) Electrospun Nanofiber Hybrid Membrane for Simultaneous Removal of PM0.3 and SO2

Growing concerns over poor air quality, especially in urban and industrial regions, have led to increased global demands for advanced air-purification technologies. However, the stability and airborne pollutant control abilities of the available air-purification materials under diverse environmental conditions are limited. Thus, the advanced development of filtration materials that can effectively control different types of pollutants, such as particulate matter (PM) and gaseous pollutants, simultaneously has attracted attention. The zeolitic imidazolate framework (ZIF), a type of porous metal-organic framework (MOF), is a promising material for capturing weakly acidic toxic gases such as SO2 owing to its excellent adsorption performance and high thermal and chemical stability. In this study, we successfully developed an ultrastable necklace-like multifunctional hybrid membrane via the cetyltrimethylammonium bromide-assisted in situ growth of zeolitic imidazolate framework (ZIF)-67 crystals on electrospun Co2+-doped poly(vinylidene fluoride) nanofibers (70 nm) that can be used in different moisture environments to achieve sustainable air-filtration performance. The hybrid nanocomposite membrane demonstrated excellent performance for the simultaneous control of intractable fine PM0.3 (filtration efficiency, 99.461%) and SO2 (adsorption capacity, 1476.5 mg g-1) under different humidity conditions. This study contributes to the optimal synergistic integration of the advanced metal-organic framework (MOF)-nanofiber nanocomposite membranes and can guide the rational design and conceptualization of a facile and novel membrane for various applications in the environmental science and energy fields.

Amorphous amEu-NH2BDC and amTb-NH2BDC as ratio fluorescence probes for smartphone-integrated naked eye detection of bacillus anthracis biomarker

The abnormal concentration of anthrax spore biomarker 2,6-pyridinedicarboxylic acid (2,6-DPA) will seriously affect public health. Therefore, a sensitive and rapid assay for 2,6-DPA monitoring is of vital importance. In this work, novel nano-sized amorphous Eu-NH2BDC (amEu-NH2BDC) and amorphous Tb-NH2BDC (amTb-NH2BDC) metal organic frameworks are prepared by adjusting the ratio of metal and ligand, respectively. Both of them exhibit highly sensitive and selective ratiometric fluorescence detection for 2,6-DPA with wider linear range and lower detection limit in aqueous solutions and human serum. Attributed to the coordination effect of 2,6-DPA in triggering the characteristic fluorescence emissions of Eu3+or Tb3+ by replacing coordinated solvent molecules, as evidenced by ultraviolet-visible spectroscopy, the fluorescence lifetimes analysis, thermal gravimetric analysis, Fourier-transform infrared spectroscopy, density functional theory (DFT) simulations and X-ray photoelectron spectroscopy. In addition, the amEu-NH2BDC or amTb-NH2BDC loaded paper-based microsensors are constructed for real-time and sensitive detection of 2,6-DPA and coupled with a smartphone-assisted visual portable device.

Unique and outstanding catalytic behavior of a novel MOF@COF composite as an emerging and powerful catalyst in the preparation of 2,3-dihydroquinazolin-4(1H)-one derivatives

The creation of an emerging porous structure using the hybridization of UiO-66-NH2-MOF, a zirconium-based metal-organic framework (MOF), with a covalent organic framework (COF) based on terephthaldehyde and melamine (UiO-66-NH2-MOF@COF), was assessed using SEM, XRD, EDX/mapping, FT-IR, BET, and TGA analyses. Using the obtained composite as a potential recoverable heterogeneous nanocatalyst, different aldehydes were condensed with isatoic anhydride and anilines or ammonium acetate under solvent-free conditions to create derivatives of 2,3-dihydroquinazolin-4(1H)-one. Examining the catalytic capabilities of the designed UiO-66-NH2-MOF@COF to efficiently produce 2,3-dihydroquinazolin-4(1H)-ones was a standout activity. Low catalyst loading, simple set-up, outstanding yields, and catalyst recoverability are all benefits of this research.

Co3 O4 Quantum Dots Intercalation Liquid-Crystal Ordered-Layered-Structure Optimizing the Performance of 3D-Printing Micro-Supercapacitors

The effects of near surface or surface mechanisms on electrochemical performance (lower specific capacitance density) hinders the development of 3D printed micro supercapacitors (MSCs). The reasonable internal structural characteristics of printed electrodes and the appropriate intercalation material can effectively compensate for the effects of surface or near-surface mechanisms. In this study, a layered structure is constructed inside an electrode using an ink with liquid-crystal characteristics, and the pore structure and oxidation active sites of the layered electrode are optimized by controlling the amount of Co3 O4 -quantum dots (Co3 O4 QDs). The Co3 O4 QDs are distributed in the pores of the electrode surface, and the insertion of Co3 O4 QDs can effectively compensate for the limitations of surface or near-surface mechanisms, thus effectively improving the pseudocapacitive characteristics of the 3D-printed MSCs. The 3D printed MSC exhibits a high area capacitance (306.13 mF cm-2 ) and energy density (34.44 µWh cm-2 at a power density of 0.108 mW cm-2 ). Therefore, selecting the appropriate materials to construct printable electrode structures and effectively adjusting material ratios for efficient 3D printing are expected to provide feasible solutions for the construction of various high-energy storage systems such as MSCs.

Recent Progress in MOF-Based Electrochemical Sensors for Non-Enzymatic Glucose Detection

In recent years, substantial advancements have been made in the development of enzyme-free glucose sensors utilizing pristine metal-organic frameworks (MOFs) and their combinations. This paper provides a comprehensive exploration of various MOF-based glucose sensors, encompassing monometallic MOF sensors as well as multi-metal MOF combinations. These approaches demonstrate improved glucose detection capabilities, facilitated by the augmented surface area and availability of active sites within the MOF structures. Furthermore, the paper delves into the application of MOF complexes and derivatives in enzyme-free glucose sensing. Derivatives incorporating carbon or metal components, such as carbon cloth synthesis, rGO-MOF composites, and core-shell structures incorporating noble metals, exhibit enhanced electrochemical performance. Additionally, the integration of MOFs with foams or biomolecules, such as porphyrins, enhances the electrocatalytic properties for glucose detection. Finally, this paper concludes with an outlook on the future development prospects of enzyme-free glucose MOF sensors.

Layered bimetallic hydroxide nanocage assembled on MnO2 nanotubes: A hierarchical porous sugar gourd-like electrocatalyst for the sensitive detection of hydrogen peroxide in food

Hydrogen peroxide is used widely as a disinfection or bleaching additive during processing in the food industry. However, excessive residues of hydrogen peroxide in food have serious human health implications. In the present study, a novel electrochemical sensing electrode (MnO₂/ZIF-67@LDH) with hierarchical porous sugar gourd-like structure was fabricated through a multi-step hydrothermal method using ZIF as the precursor. The unique porous nanocage structure of the sensing electrode provided multidimensional charge transfer channels and accelerated the electron transfer rate. As a hydrogen peroxide sensor, the electrode had two detection linear ranges of 1×10^-3-4 mmol L^-1 and 4-8 mmol L^-1, and the detection limit was 0.26 µmol L^-1. The MnO₂/ZIF-67@LDH sensor was also applied to determine the content of hydrogen peroxide in actual food samples of juice and milk, and satisfactory recovery were achieved. The present study provides a novel and effective design strategy for the construction of electrochemical sensing electrodes.

In Situ Fabrication of Silver Peroxide Hybrid Ultrathin Co-Based Metal-Organic Frameworks for Enhanced Chemodynamic Antibacterial Therapy

Bacterial-induced infectious diseases have always caused an unavoidable problem and lead to an increasing threat to human health. Hence, there is an urgent need for effective antibacterial strategies to treat infectious diseases. Current methods are often ineffective and require large amounts of hydrogen peroxide (H₂O₂), with harmful effects on normal healthy tissue. Chemodynamic therapy (CDT) provides an ideal infection microenvironment (IME)-activated paradigm to tackle bacterial-related diseases. To take full advantage of the specificity of IME and enhanced CDT for wounds with bacterial infection, we have designed an intelligent antibacterial system that exploits nanocatalytic ZIF-67@Ag₂O₂ nanosheets. In this system, silver peroxide nanoparticles (Ag₂O₂ NPs) were grown on ultrathin zeolitic imidazolate framework-67 (ZIF-67) nanosheets by in situ oxidation, and then, ZIF-67@Ag₂O₂ nanosheets with the ability to self-generate H₂O₂ were triggered by the mildly acidic environment of IME. Lamellar ZIF-67 nanosheets were shown to rapidly degrade and release Co²⁺, allowing the conversion of less reactive H₂O₂ into the highly toxic reactive oxygen species hydroxyl radicals (^•OH) for enhanced CDT antibacterial properties. In vivo results revealed that the ZIF-67@Ag₂O₂ nanosheet system exhibits excellent antibacterial performance against both Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria. The proposed hybrid strategy demonstrates a promising therapeutic strategy to enable antibacterial agents with IME-responsive nanocatalytic activity to circumvent antibiotic resistance against bacterial infections.

Ethanol-Induced Ni2+ -Intercalated Cobalt Organic Frameworks on Vanadium Pentoxide for Synergistically Enhancing the Performance of 3D-Printed Micro-Supercapacitors

The synthesis of metal-organic framework (MOF) nanocomposites with high energy density and excellent mechanical strength is limited by the degree of lattice matching and crystal surface structure. In this study, dodecahedral ZIF-67 is synthesized uniformly on vanadium pentoxide nanowires. The influence of the coordination mode on the surface of ZIF-67 in ethanol is also investigated. Benefitting from the different coordination abilities of Ni²⁺ , Co²⁺ , and N atoms, spatially separated surface-active sites are created through metal-ion exchange. Furthermore, the incompatibility between the d⁸ electronic configuration of Ni²⁺ and the three-dimensional (3D) structure of ZIF-67 afforded the synthesis of hollow structures by controlling the amount of Ni doping. The formation of NiCo-MOF@CoOOH@V₂ O₅ nanocomposites is confirmed using X-ray absorption fine structure analysis. The high performance of the obtained composite is illustrated by fabricating a 3D-printed micro-supercapacitor, exhibiting a high area specific capacitance of 585 mF cm^-2 and energy density of 159.23 µWh cm^-2 (at power density = 0.34 mW cm^-2 ). The solvent/coordination tuning strategy demonstrated in this study provides a new direction for the synthesis of high-performance nanomaterials for electrochemical energy storage applications.

Enhancing Hydrogen Sulfide Detection at Room Temperature Using ZIF-67-Chitosan Membrane

Developing new materials for energy and environment-related applications is a critical research field. In this context, organic and metal-organic framework (MOF) materials are a promising solution for sensing hazardous gases and saving energy. Herein, a flexible membrane of the zeolitic imidazole framework (ZIF-67) mixed with a conductivity-controlled chitosan polymer was fabricated for detecting hydrogen sulfide (H₂S) gas at room temperature (RT). The developed sensing device remarkably enhances the detection signal of 15 ppm of H₂S gas at RT (23 °C). The response recorded is significantly higher than previously reported values. The optimization of the membrane doping percentage achieved exemplary results with respect to long-term stability, repeatability, and selectivity of the target gas among an array of several gases. The fabricated gas sensor has a fast response and a recovery time of 39 s and 142 s, respectively, for 15 ppm of H₂S gas at RT. While the developed sensing device operates at RT and uses low bias voltage (0.5 V), the requirement for an additional heating element has been eliminated and the necessity for external energy is minimized. These novel features of the developed sensing device could be utilized for the real-time detection of harmful gases for a healthy and clean environment.

In Situ Reconstructed Mo-doped Amorphous FeOOH Boosts the Oxygen Evolution Reaction

Developing a fast and highly active oxygen evolution reaction (OER) catalyst to change energy kinetics technology is essential for making clean energy. Herein, we prepare three-dimensional (3D) hollow Mo-doped amorphous FeOOH (Mo-FeOOH) based on the precatalyst MoS₂ /FeC₂ O₄ via in situ reconstruction strategy. Mo-FeOOH exhibits promising OER performance. Specifically, it has an overpotential of 285 mV and a durability of 15 h at 10 mA cm^-2 . Characterizations indicate that Mo was included inside the FeOOH lattice, and it not only modifies the electronic energy levels of FeOOH but also effectively raises the inherent activity of FeOOH for OER. Additionally, in situ Raman analysis indicates that FeC₂ O₄ gradually transforms into the FeOOH active site throughout the OER process. This study provides ideas for designing in situ reconstruction strategies to prepare heteroatom doping catalysts for high electrochemical activity.

Promotion of Au nanoparticles on carbon frameworks for alkali-free aerobic oxidation of benzyl alcohol

We synthesized a series of modified Co-ZIF-67 materials with tunable morphology to support fine Au nanoparticles for the alkali-free aerobic oxidation of benzyl alcohol. Structure promotion was performed using Stöber silica as a hard template, which was subsequently removed by NaOH etching before gold immobilization. The texture structure of Au/(Si)C was greatly improved with increasing surface area and volume. CoOx was simultaneously introduced into the carbon shell from the Co-ZIF-67 precursor, which consequently facilitated the specific Au-support interaction via bimetallic synergy. XRD, XPS, and TEM images demonstrated the redispersion of both Au and CoOx as well as the electronic delivery between metals. Analysis of the chemical and surface composition suggested a surface rich in Auδ+ with abundant lattice oxygen contributed by CoOx in the final Au/(Si)C, which improved the transformation rate of benzyl alcohol even in an alkali-free condition. Au/(Si)C with finely dispersed Au particles showed excellent catalytic performance in the alkali-free environment, with 89.3% benzyl conversion and 74.5% benzaldehyde yield under very mild conditions.

Microorganisms@aMIL-125 (Ti): An Amorphous Metal-Organic Framework Induced by Microorganisms and Their Applications

Amorphous metal-organic framework (aMOF)-based materials have attracted considerable attention as an emerging class of nanomaterials. Herein, novel microorganisms@aMIL-125 (Ti) composites including yeast@aMIL-125 (Ti), PCC 6803@aMIL-125 (Ti), and Escherichia coli@aMIL-125 (Ti) composites were respectively synthesized by self-assembling aMOFs on the microorganisms' surface. The functional groups on the microorganisms' surface induced structural defects and participated in the formation of aMIL-125 (Ti) composites. Finally, the application of microorganisms@aMIL-125 (Ti) composites for the removal of glyphosate from aqueous solution was selected as a model reaction to illustrate their potential for environmental protection. The present method is not only economical but also has other advantages including ease of operation, environmentally friendly assay, and high adsorption. The maximum adsorption capacity of aMIL-125 (Ti) was 1096.25 mg g^-1, which was 1.74 times that of crystalline MIL-125 (Ti). Therefore, the microorganisms@aMOFs composites will have broad application prospects in energy storage, drug delivery, catalysis, adsorbing toxic substances, sensing, encapsulating and delivering enzymes, and in other fields.

Hierarchical Structures Composed of Cu(OH)2 Nanograss within Directional Microporous Cu for Glucose Sensing

Cu(OH)₂ nanomaterials are widely investigated for non-enzymatic glucose sensors due to their low-cost and excellent performance. Cu(OH)₂ nanomaterials usually grow on substrates to form sensor electrodes. Reported works mainly focus on structure adjusting of the Cu(OH)₂ nanostructures, while the optimization of substrates is still lacking. In the present work, directional porous Cu (DPC) was applied as the substrate for the growth of Cu(OH)₂ nanograss (NG), and hierarchical structures of Cu(OH)₂@DPC were prepared by alkaline oxidation. The morphology and microstructure evolution of the prepared hierarchical structures was investigated, and the non-enzymatic glucose sensing performance was evaluated. Cu(OH)₂@DPC exhibits enhanced comprehensive non-enzymatic glucose sensing performance compared to the reported ones, which may benefit from both the effective adsorption of the Cu(OH)₂ NG with a relatively high surface area and the high solute exchange of the DPC by a channel effect. This work provides new insights into the further improvement of the non-enzymatic glucose sensing performance of Cu(OH)₂ nanostructures by optimizing the substrate structure.

Enhanced Mechanical Stability and Proton Conductivity Performance from the Dense Mn(II)-Metal-Organic Framework to Porous Mn(II)-Fe(III)-Metal-Organic Framework

Postsynthetic modification (PSM) of the metal-organic framework (MOF) has been demonstrated to be an effective strategy to enhance performance. In this particular work, the anion framework Mn-MOF {[Mn₃O(H₂O)₃(HTC)]^2-} (HTC^6- = (5'-(3,5-dicarboxyphenyl)-[1,1':3',1″-terphenyl]-3,3″,5,5″-tetracarboxylate] was obtained, and NH₂(CH₃)₂⁺ ions were filled within the pores to balance the charge. In order to release the internal pores of Mn-MOF, the trivalent Fe(III) was introduced instead of Mn(II) nodes, resulting in the porous Mn_1-xFe_x-MOF, and the NH₂(CH₃)₂⁺ ions were simultaneously deported from the pores. The content of Fe(III) in Mn_1-xFe_x-MOF was highly dependent on the concentration of Fe(III) solution, and the maximum could be up to Mn_0.05Fe_0.95-MOF with a BET surface area of 1209.457 m² g^-1. Compared to the amorphization of dense Mn-MOF at 0.8 GPa in a diamond anvil cell, the mechanical stability of porous Mn_0.05Fe_0.95-MOF has been dramatically enhanced, and the framework integrity could be maintained up to 16.5 GPa. The proton conductivity for the Mn_1-xFe_x-MOF series was also investigated, where Mn_0.93Fe_0.07-MOF showed the best performance of 1.47 × 10^-2 S cm^-1 under 70 °C and 98% RH due to the onset of reversed charge from the anionic framework to cationic framework and the formation of the most compact hydrogen bonding net. This work has not only provided an example for the PSM strategy but also illustrated that the versatile functionalities of MOF materials were mainly ascribed to the tunable porosity.

Riemannian Surface on Carbon Anodes Enables Li-Ion Storage at -35 °C

Since sluggish Li⁺ desolvation leads to severe capacity degradation of carbon anodes at subzero temperatures, it is urgently desired to modulate electron configurations of surface carbon atoms toward high capacity for Li-ion batteries. Herein, a carbon-based anode material (O-DF) was strategically synthesized to construct the Riemannian surface with a positive curvature, which exhibits a high reversible capacity of 624 mAh g^-1 with an 85.9% capacity retention at 0.1 A g^-1 as the temperature drops to -20 °C. Even if the temperature drops to -35 °C, the reversible capacity is still effectively retained at 160 mAh g^-1 after 200 cycles. Various characterizations and theoretical calculations reveal that the Riemannian surface effectively tunes the low-temperature sluggish Li⁺ desolvation of the interfacial chemistry via locally accumulated charges of non-coplanar sp ^x (2 < x < 3) hybridized orbitals to reduce the rate-determining step of the energy barrier for the charge-transfer process. Ex-situ measurements further confirm that the sp ^x -hybridized orbitals of the pentagonal defect sites should denote more negative charges to solvated Li⁺ adsorbed on the Riemannian surface to form stronger Li-C coordinate bonds for Li⁺ desolvation, which not only enhances Li-adsorption on the curved surface but also results in more Li⁺ insertion in an extremely cold environment.

Hollow Structured Transition Metal Phosphates and Their Applications

Hollow nanostructures of transition metal phosphate are of immense interest in the existing and evolving areas of technology, due to their high surface area, presence of hollow void, and easy tuning of compositions and dimensions. Emerging synthesis methods such as template-free methods, hard-templating, and soft-templating are discussed in this review. Applications of these hollow metal phosphates dominate in energy storage and conversions, with specific advantages as supercapacitor materials. Other applications, including drug delivery, water splitting, catalysis, and adsorption, are reviewed. Finally, additional perspectives on the progress of these nanostructures, and their existing challenges related to the current synthesis routes are covered. Therefore, with the strategic modifications of the unique properties of these hollow metal phosphates, broader application requirements are fulfilled.

ZIF-X (8, 67) based nanostructures for gas-sensing applications

ZIF-8 and ZIF-67 are the most investigated zeolitic imidazolate frameworks (ZIFs) materials that have aroused enormous scientific interests in numerous areas of application including electrochemistry, gas storage, separation, and sensors by reason of their fascinating structural properties. Recently, there is a rapidly growing demand for chemical gas sensors for the detection of various analytes in widespread applications including environmental pollution monitoring, clinical analysis, wastewater analysis, industrial applications, food quality, consumer products, and automobiles. In general, the key to the development of superior gas sensors is exploring innovative sensing materials. ZIF-X (8, 67) based nanostructures have demonstrated great potential as ideal sensing materials for high-performance sensing applications. In this review, the general properties and applications of ZIF-X (8, 67) including gas storage and gas adsorption are first summarized, and then the recent progress of ZIF-X (8, 67) based nanostructures for gas-sensing applications and the structure-property correlations are summarized and analyzed.

Mixture Phases Engineering of PtFe Nanofoams for Efficient Hydrogen Evolution

Phase engineering is a promising but challenging approach to construct PtFe-based catalysts with efficient hydrogen evolution reaction (HER) performance. Herein, the authors successfully synthesize PtFe nanofoams with face center cubic (fcc) phase, with simple cubic crystalline (scc) phase and with the mixture phases of fcc and scc phases (PtFe-mix) by hydrogen-assisted calcination for the first time. By benchmarking the HER activity, PtFe-mix exhibits excellent activity in 1.0 m KOH, requiring an overpotential of 28 mV to achieve 10 mA cm^-2 , which is better than the commercial Pt/C (34 mV). PtFe-mix also possesses remarkable stability up to 24 h. Density functional theory calculations further verify that PtFe-mix shows a more suitable d-band center and lower energy barrier for the initial water dissociation, facilitating the HER process. This work provides a meaningful strategy to design PtFe-based catalysts with efficient activity for hydrogen evolution.

Environmental decomposition and remodeled phytotoxicity of framework-based nanomaterials

Zeolitic imidazole frameworks (ZIFs) have attracted a considerable amount of attention for use in environmental applications (e.g., pollutant adsorption and photocatalysis in water treatments). The environmental stability and toxicity of ZIFs are key prerequisites for their practical applications, but information about these factors is largely lacking. The present work finds that pristine ZIFs (ZIF-8 and ZIF-67) photodegrade from frame structures into two-dimensional nanosheets and are oxidized to zinc carbonate (ZIF-8) and Co₃O₄ (ZIF-67) under visible-light irradiation. The photoinduced electrons, holes and free radicals promote dissolution of the metal cores and organic ligands, leading to collapse of the frame structure. The photodegradation of ZIF-8 alleviates developmental inhibition, oxidative stress, plasmolysis, and photosynthetic toxicity, while the photodegradation of ZIF-67 aggravates nanotoxicity. The integration of metabolomics and transcriptomics analysis reveals that unsaturated fatty acid biosynthesis and metal ion-binding transcription contribute to the altered toxicity of ZIF photodegradation. These findings highlight the roles of photodegradation in structural transformation and alteration of the toxicity of ZIFs, alarming the study of pristine metal-organic frameworks (MOFs).

Comparison of a 2D/3D imidazole-based MOF and its application as a non-enzymatic electrochemical sensor for the detection of uric acid

Two dimensional microplate of W-ZIF-67 promotes a high catalytic activity for non-enzymatic electrochemical uric acid detection.

High-Performance Capacitive Deionization and Killing Microorganism in Surface-Water by ZIF-9 Derived Carbon Composites

The protection and regeneration of the water environment is currently one of the most critical concerns for the sustainable development of human society. To solve the water crisis, the use of capacitive deionization (CDI) technology to extract fresh-water that is suitable for human consumption from abundant surface-water is a feasible solution. In this work, a cobalt benzimidazole frameworks (ZIF-9) derived carbon composites with a unique quasi-microcubic morphology is synthesized and used the as-prepared materials as an electrode material for the CDI. Interestingly, the ZIF-9 derived carbon composites exhibit an impressive desalination capacity of 55.4 mg g^-1 and can be reused. Measurements in surface-water (Beijing-Hangzhou Grand Canal, Slender West Lake, Initial rainwater, Rain water) show that this CDI technology based on ZIF-9 derived carbon composites not only has a strong adsorption effect on metal ions but also can remarkably kill microorganisms. The results show that the technology can effectively kill bacteria (Escherichia coli and Bacillus) and algae with 95% and 91.7% inhibition rates, respectively. This work provides a valuable example for the use of metal-organic framework-derived carbon composites as high-performance electrode materials of CDI and opens a new direction for promoting the application of CDI in surface-water.

Synthesis of truncated octahedral zinc-doped manganese hexacyanoferrates and low-temperature calcination activation for lithium-ion battery

Owing to their open three-dimensional framework structure, Prussian blue analogues (PBAs) have attracted increasing interest as anode materials for future lithium-ion batteries (LIBs). However, some disadvantages, such as inferior stability and short cycle life, hinder its utilization significantly. Hence, we develop a simple method to prepare a unique truncated octahedral ZnMnFe-PBA with exposed {111} crystal facets. The doping of Zn into Mn-based PBA enhances structural stability and improves the electronic conductivity. Meanwhile, low-temperature calcination not only improves the electrochemical activity but also preserves the porosity to enable mass transfer. When the ratio of Mn:Zn is 90:10 and the calcination temperature is 100 °C, sample Z10-100 displays high capacity and excellent cycle life (∼510.6 mA h g^-1 at 0.1 A g^-1, 168.9 mA h g^-1 after 5000 cycles at 1.0 A g^-1 with 99.9% capacity retention). The significant improvements in cycle stability and cycle life are attributable to transition metal ion doping and effective low-temperature calcination activation, which provide a facile approach for the synthesis of low-cost and efficient electrode materials.

Homogeneous Distribution of Pt16(C4O4SH5)26 Clusters in ZIF-67 for Efficient Hydrogen Generation and Oxygen Reduction

In recent years, based on the high catalytic activities of metal nanoclusters (MNCs) and the unique porous structure of metal-organic frameworks (MOFs), much work has focused on MOF-confined small MNCs for catalysis applications. However, the commonly used "ship-in-boat" approach is unfeasible for precisely controlling the size and composition of the formed MNCs and meanwhile often causes structural distortion/degradation. On the other hand, the "bottle-around-ship" method usually has the disadvantages that MOFs show uncontrollable self-nucleation outside the MNCs and the stabilizers on the surface of MNCs may greatly reduce their catalytic activities. In this work, monodispersed Pt₁₆(C₄O₄SH₅)₂₆ clusters (Pt₁₆(MSA)₂₆) were first prepared and used as a precursor for the synthesis of Pt(MSA)@ZIF-67 via the typical Co-carboxylate type of linkage at the interface under ambient atmosphere. After encapsulating the Pt clusters in ZIF-67, the protecting ligands were removed under 300 °C to get surface-clean Pt₁₆ clusters confined in ZIF-67 (Pt@ZIF-67). The obtained Pt@ZIF-67 exhibited high catalytic activity for the hydrolysis of ammonia borane that was superior to that of most of the reported noble-metal catalysts. Meanwhile, by annealing the Pt(MSA)@ZIF-67 at 800 °C to form highly conductive graphitic carbon-coated Pt NCs and Co nanoparticles (NPs) (Pt/Co@NC), the obtained composite showed high catalytic activity for the oxygen reduction reaction (ORR). The formed Pt/Co@NC showed 9.6 times higher ORR mass activity (at 0.8 V) than Pt/C. This work provides a strategy to fabricate highly dispersed and stable metal clusters confined in the porous matrix for catalysis and shows that highly porous MOFs have promising catalysis applications by combining them with other active components.

ZIF-67-based catalysts for oxygen evolution reaction

As a new type of crystalline porous material, the imidazole zeolite framework (ZIF) has attracted widespread attention due to its ultra-high surface area, large pore volume, and unique advantage of easy functionalization. Developing different methods to control the shape and composition of ZIF is very important for its practical application as catalyst. In recent years, nano-ZIF has been considered an electrode material with excellent oxygen evolution reaction (OER) performance, which provides a new way to research electrolyzed water. This review focuses on the morphological engineering of the original ZIF-67 and its derivatives (core-shell, hollow, and array structures) through doping (cation doping, anion doping, and co-doping), derivative composition engineering (metal oxide, phosphide, sulfide, selenide, and telluride), and the corresponding single-atom catalysis. Besides, combined with DFT calculations, it emphasizes the in-depth understanding of actual active sites and provides insights into the internal mechanism of enhancing the OER and proposes the challenges and prospects of ZIF-67 based electrocatalysts. We summarize the application of ZIF-67 and its derivatives in the OER for the first time, which has significantly guided research in this field.

Photocatalytic and Electrocatalytic Properties of Cu-Loaded ZIF-67-Derivatized Bean Sprout-Like Co-TiO2/Ti Nanostructures

ZIF-derivatized catalysts have shown high potential in catalysis. Herein, bean sprout-like Co-TiO2/Ti nanostructures were first synthesized by thermal treatment at 800 °C under Ar-flow conditions using sacrificial ZIF-67 templated on Ti sheets. It was observed that ZIF-67 on Ti sheets started to thermally decompose at around 350 °C and was converted to the cubic phase Co3O4. The head of the bean sprout structure was observed to be Co3O4, while the stem showed a crystal structure of rutile TiO2 grown from the metallic Ti support. Cu sputter-deposited Co-TiO2/Ti nanostructures were also prepared for photocatalytic and electrocatalytic CO2 reduction performances, as well as electrochemical oxygen reaction (OER). Gas chromatography results after photocatalytic CO2 reduction showed that CH3OH, CO and CH4 were produced as major products with the highest MeOH selectivity of 64% and minor C2 compounds of C2H2, C2H4 and C2H6. For electrocatalytic CO2 reduction, CO, CH4 and C2H4 were meaningfully detected, but H2 was dominantly produced. The amounts were observed to be dependent on the Cu deposition amount. Electrochemical OER performances in 0.1 M KOH electrolyte exhibited onset overpotentials of 330-430 mV (vs. RHE) and Tafel slopes of 117-134 mV/dec that were dependent on Cu-loading thickness. The present unique results provide useful information for synthesis of bean sprout-like Co-TiO2/Ti hybrid nanostructures and their applications to CO2 reduction and electrochemical water splitting in energy and environmental fields.

Zinc(ii) and cadmium(ii) amorphous metal-organic frameworks (aMOFs): study of activation process and high-pressure adsorption of greenhouse gases

Two novel amorphous metal-organic frameworks (aMOFs) with chemical composition {[Zn2(MTA)]·4H2O·3DMF} n (UPJS-13) and {[Cd2(MTA)]·5H2O·4DMF} n (UPJS-14) built from Zn(ii) and Cd(ii) ions and extended tetrahedral tetraazo-tetracarboxylic acid (H4MTA) as a linker were prepared and characterised. Nitrogen adsorption measurements were performed on as-synthesized (AS), ethanol exchanged (EX) and freeze-dried (FD) materials at different activation temperatures of 60, 80, 100, 120, 150 and 200 °C to obtain the best textural properties. The largest surface areas of 830 m2 g-1 for UPJS-13 (FD) and 1057 m2 g-1 for UPJS-14 (FD) were calculated from the nitrogen adsorption isotherms for freeze-dried materials activated at mild activation temperature (80 °C). Subsequently, the prepared compounds were tested as adsorbents of greenhouse gases, carbon dioxide and methane, measured at high pressures. The maximal adsorption capacities were 30.01 wt% CO2 and 4.84 wt% CH4 for UPJS-13 (FD) and 24.56 wt% CO2 and 6.38 wt% CH4 for UPJS-14 (FD) at 20 bar and 30 °C.

Novel voltammetric tumor necrosis factor-alpha (TNF-α) immunosensor based on gold nanoparticles involved in thiol-functionalized multi-walled carbon nanotubes and bimetallic Ni/Cu-MOFs

TNF-α, as a pro-inflammatory cytokine, regulates some physiological and pathological courses. TNF-α level increases in some important diseases such as cancer, arthritis, and diabetes. In addition, it displays an important function in Alzheimer's and cardiovascular diseases. Herein, a novel, sensitive, and selective voltammetric TNF-α immunosensor was prepared by using gold nanoparticles involved in thiol-functionalized multi-walled carbon nanotubes (AuNPs/S-MWCNTs) as sensor platform and bimetallic Ni/Cu-MOFs as sensor amplification. Firstly, the sensor platform was developed on glassy carbon electrode (GCE) surface by using mixture of thiol-functionalized MWCNTs (S-MWCNTs) and AuNPs. Then, capture TNF-α antibodies were conjugated to sensor platform by amino-gold affinity. After capture TNF-α antibodies' immobilization, a new-type voltammetric TNF-α immunosensor was developed by immune reaction between AuNPs/S-MWCNTs immobilized with primer TNF-α antibodies and bimetallic Ni/Cu-MOFs conjugated with seconder TNF-α antibodies. The prepared TNF-α immunosensor was characterized by transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray diffraction (XRD) method, x-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), thermogravimetric analysis, Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS). A linearity range of 0.01-1.0 pg mL^-1 and a low detection limit of 2.00 fg mL^-1 were also obtained for analytical applications.

A Non-enzymatic Electrochemical Sensor for Glucose Detection Based on Ag@TiO2@ Metal-Organic Framework (ZIF-67) Nanocomposite

This work presents the preparation of an efficient and sensitive glucose sensor for the detection of glucose in an alkaline media. The glucose sensor is composed of a metal organic framework (MOF) composite comprising Ag@TiO₂ nanoparticles. The hybrid of Ag@TiO₂ encapsulated in ZIF-67 was synthesized by the solvothermal method and applied onto a glassy carbon electrode (GCE) for the non-enzymatic sensing of glucose. The porosity of ZIF-67 was favorable for the unhindered diffusion and entrapment of glucose and its cavities served as reaction vessels. The electrochemical behavior of Ag@TiO₂@ZIF-67 showed amplified results when compared with that of Ag@TiO₂ and ZIF-67. Cyclic tests toward the oxidation of glucose has demonstrated excellent stability of a MOF-based hybrid sensor. The sensor based on Ag@TiO₂@ZIF-67 showed high sensitivity of 0.788 μAμM⁻¹cm⁻² with a linear concentration range of 48 μM⁻¹ mM and a response time of 5 s with an excellent detection limit of 0.99 μM (S/N = 3).

Hydrochloric acid corrosion induced bifunctional free-standing NiFe hydroxide nanosheets towards high-performance alkaline seawater splitting

We report a facile route to fabricate free-standing NiFe hydroxides by corrosion engineering as high-performance bifunctional electrocatalysts for seawater splitting. Compared with H2SO4 and HNO3, HCl can promote the dissolution of Ni2+ from NiFe foam and the in situ formation of active NiFe hydroxides due to the strong interaction between Cl- and metal. In situ Raman spectroscopic characterization reveals that HCl corrosion induced NiFe hydroxides (HCl-c-NiFe) can generate oxygen evolution reaction (OER) active NiOOH species at a low potential of 1.4 V vs. reversible hydrogen electrode (RHE) and exhibits equally respectable activity for the hydrogen evolution reaction (HER). During a 1000 h test in an alkaline electrolyte or a 300 h test in an alkaline seawater electrolyte within a two-electrode system at 100 mA cm-2, the cell exhibits outstanding stability and high Cl- tolerance with a low working voltage of 1.62 V, outperforming benchmark Pt/IrO2 and most of the reported bifunctional catalysts.

Enhanced Desalination Performance of Capacitive Deionization Using Nanoporous Carbon Derived from ZIF-67 Metal Organic Frameworks and CNTs

Capacitive deionization (CDI) based on ion electrosorption has recently emerged as a promising desalination technology due to its low energy consumption and environmental friendliness compared to conventional purification technologies. Carbon-based materials, including activated carbon (AC), carbon aerogel, carbon cloth, and carbon fiber, have been mostly used in CDI electrodes due their high surface area, electrochemical stability, and abundance. However, the low electrical conductivity and non-regular pore shape and size distribution of carbon-based electrodes limits the maximization of the salt removal performance of a CDI desalination system using such electrodes. Metal-organic frameworks (MOFs) are novel porous materials with periodic three-dimensional structures consisting of metal center and organic ligands. MOFs have received substantial attention due to their high surface area, adjustable pore size, periodical unsaturated pores of metal center, and high thermal and chemical stabilities. In this study, we have synthesized ZIF-67 using CNTs as a substrate to fully utilize the unique advantages of both MOF and nanocarbon materials. Such synthesis of ZIF-67 carbon nanostructures was confirmed by TEM, SEM, and XRD. The results showed that the 3D-connected ZIF-67 nanostructures bridging by CNTs were successfully prepared. We applied this nanostructured ZIF-67@CNT to CDI electrodes for desalination. We found that the salt removal performance was significantly enhanced by 88% for 30% ZIF-67@CNTs-included electrodes as compared with pristine AC electrodes. This increase in salt removal behavior was analyzed by electrochemical analysis such as cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) measurements, and the results indicate reduced electrical impedance and enhanced electrode capacitance in the presence of ZIF-67@CNTs.

Anchoring ZIF-67 particles on amidoximerized polyacrylonitrile fibers for radionuclide sequestration in wastewater and seawater

Capturing uranium (U(VI)) ions from wastewater and seawater is highly attractive for the environment and clean energy with the increasing deficiency of land sources. Howbeit, the massive volume of water and the ultralow concentration of U(VI) pose a substantial challenge to the industrial application. Accordingly, we have synthesized a novel organic-inorganic hybrid adsorbent through in-situ growing MOF particles on electrospun polyacrylonitrile fibers (PAN) followed by modifing with amidoxime groups to form amidoximed PAN/ZIF-67 (AOPAN/ZIF) hybrid fibers. In such fibers, the N atoms from imidazole and amidoxime can improve the adsorption performance synergistically in a wide pH range, which is favorable for capturing U(VI) under nuclear wastewater and seawater. As a result, the AOPAN/ZIF fibers exhibit high adsorption amount of 498.4 mg g^-1 in U(VI) contaminated aqueous solution at pH 4. Furthermore, the adsorption amount of U(VI) reached 2.03 mg g^-1 in natural seawater after 36 d, which implies that the AOPAN/ZIF fibers may promote the development of U(VI) recovery.