Starch gelatinization and its complexity for analysis

Low density methacrylated pea, corn, and tapioca starch covalent cryogels with excellent elasticity and water/oil absorption capacity

Porous starch materials are promising in several applications as renewable natural biomaterials. This study reports an approach combining methacrylation of starch and chemical crosslinked cryogelation to fabricate highly elastic macroporous starch (ST-MA) cryogels with impressed water/oil absorption capacity and wet thermal stability among starch based porous materials. Five different types of starch, including pea, normal corn, high amylose corn, tapioca, and waxy maize starch with different amylose content, have been studied. The methacrylation degree is not related with amylose content. All cryogels exhibited excellent compressive elasticity enduring 90 % deformation without failure and good robustness in cyclic tests. The ST-MA cryogels from pea starch exhibited the highest Young's modulus and compressive strength among five types of starch. These covalent cryogels exhibit high wet-thermal stability and enzymatic hydrolysis stability, while still are biodegradable. The dry ST-MA sponges (2 wt%) showed outstanding liquid absorption capacity, absorbing ~40 folds (g/g) of water or ~ 36 folds (g/g) of oil respectively. All types of starch have similar liquid absorption performance. This study provides a universal approach to fabricate highly elastic covalent starch macroporous materials with impressed liquid absorption capacity and outstanding stability, especially wet-thermal stability, and may expand their applications.

Changes in overall digital structure, starch properties and moisture distribution reveal how the hardness of wheat noodles evolves under different cooking status

To elucidate the relationship between the structural evolution of starch within noodles during cooking and the hardness, the panoramic and local microstructure of cooked noodles were quantitatively analyzed, and the structure of starch in noodles were measured. We found that in the case of starch within cooked noodles with a high degree of swelling, the quantitative analysis of each ring was sufficient to represent the structural differences. Changes occurring in starch inside noodles during cooking were not homogeneous. The structural modifications of starch in the outer ring were greater than in the inner ring along with the extension of cooking time. The main reason responsible for the high hardness was attributed to low swelling degree and high short-range order of starch in the center. Water migration from the periphery to the center of the noodles, which was closely related to the fine structure of amylopectin, determined the state of central starch. Wheat starch with more large amylopectin molecules and more long amylopectin chains could enhance the inhibition of water migration and decrease the swelling degree of starch in the center, in order to endow a high hardness to noodles. These results will be useful for the ingredients selection for the production of noodles with desirable quality. In addition, the analysis method established in this work promoted the realization of quantitative comparison of the cooked noodles microstructure, that is an effective tool to clarify the structural basis of macroscopic quality of noodles.

Physicochemical Characteristics of Porous Starch Obtained by Combined Physical and Enzymatic Methods-Part 2: Potential Application as a Carrier of Gallic Acid

Wettability measurements were performed for aqueous dispersions of native and modified corn, potato, and pea starch granules deposited on glass plates by the thin layer method using test liquids of a different chemical nature (polar water and formamide or non-polar diiodomethane). High values of the determination coefficient R2 confirm that the linear regression model describes the relationship between the wetting time and the square of the penetration distance very well, indicating the linear nature of the Washburn relationship. A change in free energy (enthalpy) during the movement of the liquid in the porous layer was determined for all starches before and after modification in contact with test liquids. Wetting times for polar liquids increased significantly (from 3 to 4 fold), especially for corn starch. The lower the value of the adhesive tension, the easier the wetting process takes place, and consequently, the adsorption process is facilitated. Adhesive tension for polar substances applies to the adsorption of hydrophilic substances, while in the case of apolar substances, adhesive tension applies to the adsorption of hydrophobic substances. For the adsorption of gallic acid on starch, the relationships obtained for polar substances are crucial. The adsorption of gallic acid by forming hydrogen bonds or, more generally, donor-acceptor (acid-base) bonds is definitely higher for corn starch than other starches. Therefore, this starch has the most significant potential for use as a carrier of gallic acid or, more broadly, compounds from the polyphenol group.

Effect of water content on gelatinization functionality of flour from sprouted sorghum

Sorghum starch granules are encapsulated in a rigid protein matrix that prevents the granules from fully swelling and gelatinizing. Sprouting and subsequent drying treatment can affect the gelatinization properties of sorghum starch. This study aimed to evaluate the gelatinization properties of flours from unsprouted (US) and sprouted (S50, S40) sorghum dried at 50 °C (6h) and 40 °C (12h), respectively. Swelling power (Sp), thermal properties (DSC) and 1H molecular mobility and dynamics were evaluated at different water contents (38-91%). Sp increased with increasing water content, with S40 showing the lowest values, probably due to prolonged amylase activity and thus starch breakdown. Sprouting increased gelatinization temperatures; however, these differences disappeared for high water contents (82 and 91%). From a molecular point of view, sprouted samples showed a decrease in protons associated to the rigid protein matrix and starch structures. 1H CPMG results showed the presence of 4 populations at 38% water content. The evolution of the more mobile population with increasing water content supported the assignment of more mobile water fraction to this population. Sprouting decreased the mobility of populations in unheated samples, suggesting an increase in molecular bonds between flour biopolymers and water. After heating, however, increased molecular mobility in S40 indicated the formation of a weaker network between starch, protein, and water at the molecular level. These results suggest that post-sprouting drying treatment influences sorghum gelatinization, with potential modulation by water content. This study contributes to understanding the application of sprouted sorghum in foods with different moisture content.

Effects of different extrusion temperatures on the physicochemical properties, edible quality and digestive attributes of multigrain reconstituted rice

Multigrain reconstituted rice, as a nutritious and convenient staple, holds considerable promise for the food industry. Furthermore, highland barley, corn, and other coarse cereals are distinguished by their low glycemic index (GI), rendering them effective in mitigating postprandial blood glucose levels, thereby underscoring their beneficial physiological impact. This study investigated the impact of extrusion temperature on the physicochemical properties, edible quality, and digestibility of multigrain reconstituted rice. The morphology revealed that starch particles that are not fully gelatinized in multigrain reconstituted rice are observed at an extrusion temperature range of 60 °C-90 °C. As the extrusion temperature increased, the degree of gelatinization (DG) increased, while the contents of water, protein, total starch, and amylopectin decreased substantially. Concurrently, the relative crystallinity, orderliness of starch, and heat absorption enthalpy (ΔH) decreased significantly, and water absorption (WAI) and water solubility (WSI) increased markedly. Regarding edible quality, sensory evaluation displayed an initial increase followed by a decrease. In terms of digestibility, the estimated glycemic index (eGI) increased from 61.10 to 70.81, and the GI increased from 60.41 to 75.33. In addition, the DG was significantly correlated with both eGI (r = 0.886**) and GI (r = 0.947**). The results indicated that the ideal extrusion temperature for multigrain reconstituted rice was 90 °C. The findings underscored the pivotal role of optimal extrusion temperatures in the production of multigrain reconstituted rice, which features low GI and high nutritional quality.

Influence of Temperatures on Physicochemical Properties and Structural Features of Tamarind Seed Polysaccharide

Due to the high content of impurities such as proteins in tamarind seed polysaccharide (TSP), they must be separated and purified before it can be used. TSP can disperse in cold water, but a solution can only be obtained by heating the mixture. Therefore, it is important to understand the dispersion and dissolution process of TSP at different temperatures to expand the application of TSP. In this study, pasting behavior and rheological properties as a function of temperature were characterized in comparison with potato starch (PS), and their relationship with TSP molecular features and microstructure was revealed. Pasting behavior showed that TSP had higher peak viscosity and stronger thermal stability than PS. Rheological properties exhibited that G' and G'' of TSP gradually increased with the increase in temperature, without exhibiting typical starch gelatinization behavior. The crystalline or amorphous structure of TSP and starch was disrupted under different temperature treatment conditions. The SEM results show that TSP particles directly transformed into fragments with the temperature increase, while PS granules first expanded and then broken down into fragments. Therefore, TSP and PS underwent different dispersion mechanisms during the dissolution process: As the temperature gradually increased, TSP possibly underwent a straightforward dispersion and was then dissolved in aqueous solution, while PS granules initially expanded, followed by disintegration and dispersion.

Enhancing Gluten Network Formation and Bread-Making Performance of Wheat Flour Using Wheat Bran Aqueous Extract

Wheat bran possesses diverse nutritional and functional properties. In this study, wheat bran aqueous extract (WBE) was produced and thoroughly characterized as a functional ingredient and improver for bakery application. The WBE contained 50.3% total carbohydrate, 24.5% protein, 13.0% ash, 6.7% soluble fiber, 2.9% insoluble fiber, and 0.5% β-glucan. Notably, adding 7.5% WBE significantly increased the bread-specific volume to 4.84 cm3/g, compared with the control of 4.18 cm3/g. Adding WBE also resulted in a remarkable improvement in dough properties. The WBE-enriched dough showed increased peak, setback, breakdown, and final viscosities, along with higher storage and loss modulus. Scanning electron microscopy analysis further revealed that the WBE promoted the aggregation of protein and starch within the dough. The extractable gliadin to glutenin ratio increased with 5 and 7.5% WBE additions, compared with the control and 2.5% WBE addition. WBE did not significantly alter the starch gelatinization temperature or dough extension properties. These findings demonstrate that the inclusion of WBE in wheat flour is a promising approach for producing high-quality bread that is enriched with dietary fiber and protein.

"Development and characterization of edible films based on starch isolated from different Colombian potato varieties"

This work reports on the extraction and characterization of the behavior of starch from residues of several potato varieties (Criolla, Sabanera and Pastusa) of Colombian origin from the Andean region using different techniques and the evaluation of the effect of citric acid (CA) on the grain morphology. Additionally, films were produced with each one of the extracted starches and glycerol. Pastusa variety starch shows a higher granule size than the other varieties and Pastusa starch shows lower amylose content compared to Sabanera and Criolla. Criolla and Pastusa starches exhibit more thermal stability than Sabanera starch. Starch-glycerol films were also produced using the cast solving method. The films were mechanically analyzed by tensile test and the barrier properties were assessed by water vapor permeability (WVP). The tensile strength of the films varied in the 2.0-2.4 MPa range, while the elongation at break was comprised between 25 and 32 %. With regard to water vapor permeability, the obtained values fall within the 4-7 × 10-10 g m-1 s-1 Pa-1 range. It was observed that the thickness of the films and the protein content affected water vapor permeability, increasing this value at higher levels of thickness.

Changes in the pasting and rheological properties of wheat, corn, water caltrop and lotus rhizome starches by the addition of Annona montana mucilage

Annona montana mucilage (AMM) is a novel mucilage with unique but limited information. This study investigated the effects of AMM addition on the pasting and rheological properties of wheat starch (WS), corn starch (CS), water caltrop starch (WCS), and lotus rhizome starch (LRS). The addition of AMM generally increased the pasting temperature and peak viscosity, but reduced the setback value of all starches to varying degrees, and the initiation of viscosity-increase for cereal starch/AMM systems during pasting occurred at lower temperatures, accompanied with a distinctive two-stage swelling process as well as lower peak and final hot paste viscosity at 50 °C. AMM significantly increased the pseudoplasticity and entanglement of the systems to varying degrees (LRS > WS > WCS > CS). Under a constant shear rate of 50 s-1, the consistency level was found to fall in honey-like for cereal starch/AMM groups, and honey-like to extremely thick levels for WCS and LRS/AMM groups. Except for the WCS/AMM systems, the storage and loss modulus as well as tan increased with increasing AMM concentration. Short-term retrogradation of starch at 4 °C was pronouncedly retarded by the addition of AMM for WS, CS and WCS groups, but was less affected for LRS group.

Structure and properties of Quercus robur acorn starch extracted by pulsed electric field technology

Pulsed electric field (PEF) technology was used to extract starch from Q. robur flours using low-intensity electric fields (0 and 0.1 kV/cm) and study the impact of PEF on the structure and properties of acorn starch concerning commercial starch. PEF technology is an advantageous method for starch extraction than the aqueous steeping from an industrial perspective since reduces extraction time and allows for continuous processing of larger suspension volumes. PEF technology preserved the amylose and amylopectin contents, hydrogen bonds, and diffraction patterns, as well as the starch native properties. Hence, PEF could be used to obtain native starches, but future studies should verify its economic viability. Acorn starches have lower damaged starch content, gelatinization temperatures, enthalpies, improved pseudoplastic behavior, reduced in-vitro digestibility, and lower resistance to deformation compared to commercial corn starch. The higher solubility and swelling power of acorn starches up to 80 °C make them a suitable food additive in fermented yogurt and milk products and thus help to value acorn and acorn starches. Hence, acorns can be used to obtain native starches, a food ingredient with a wide range of food and non-food usage, using PEF.

Modification of Acorn Starch Structure and Properties by High Hydrostatic Pressure

Despite being rich in starch, over half of acorn production is undervalued. High hydrostatic pressure was used to modify the properties of Q. pyrenaica (0.1 and 460 MPa for 20 min) and Q. robur (0.1 and 333 MPa for 17.4 min) acorn starches to obtain high-valued ingredients. Pressure significantly altered the span distribution and heterogeneity of the acorn starch granules depending on the species, but their morphology was unaffected. Pressurization increased the amylose/amylopectin ratio and damaged starch contents, but the effect was more prominent in Q. pyrenaica than in Q. robur. However, the polymorphism, relative crystallinity, gelatinization temperatures, and enthalpies were preserved. The pressure effect on the starch properties depended on the property and species. The solubility, swelling power, and acorn gels' resistance towards deformation for both species decreased after pressurization. For Q. pyrenaica starch, the in vitro digestibility increased, but the pseudoplastic behavior decreased after pressurization. No differences were seen for Q. robur. Regarding the commercial starch, acorn starches had lower gelatinization temperatures and enthalpies, lower in vitro digestibility, lower resistance towards deformation, superior pseudoplastic behavior, and overall higher solubility and swelling power until 80 °C. This encourages the usage of acorn starches as a new food ingredient.

Tremella Polysaccharide Has Potential to Retard Wheat Starch Gel System Retrogradation and Mechanism Research

This study investigated the effects of adding different concentrations of TP (tremella polysaccharide) on the water distribution, rheological, thermal, microstructure, and retrogradation properties of WS (wheat starch) gels. The results showed that the starch aging increased during storage, and the addition of TP reduced the rate of change of the elastic modulus of the starch gel and delayed the short-term aging of WS. In the same storage period, the hardness value of the gel decreased and the texture became softer with the increase in the mass fraction of TP. TP increased the T0 (starting temperature) of the system and decreased the enthalpy of retrogradation (ΔHr). No new groups were formed after the retrogradation of the compound system, the hydrogen bonding force increased with the increase in polysaccharide, and the relative crystallinity and the degree of ordering of the system decreased. The addition of TP increased the content of bound water and immobile water, decreased the content of free water, and increased the gel water-holding capacity, indicating that it could effectively inhibit the long-term retrogradation of WS. The findings provide new theoretical insights for the production of starch-based foods.

Germinated Bambara groundnut (Vigna subterranea) flour as an ingredient in wheat bread: Physicochemical, nutritional, and sensory properties of bread

Wheat flour (WF) was substituted with germinated Bambara groundnut (Vigna subterranea) flour (GBF) at different proportions (5%, 10%, 15%, 20%, 25%, and 30%) and used in the preparation of bread. The dough mixing, pasting, and gelatinization properties of the blends were evaluated as well as the nutritional quality, in vitro starch digestibility, phytochemical constituents, antioxidant potential, color, texture, and sensory properties of breads. All the wheat dough containing GBF had higher water absorption capacity, gelatinization temperatures, dough development time, low peak, and setback viscosities. The composite breads had significantly higher dietary fiber, minerals, protein digestibility, corrected amino acid scores, resistant starch, slowly digestible starch, total phenolics, total flavonoids, and antioxidant activities and caused significant reduction in rapidly digestible starch content. The addition of up to 15% GBF had no significant impact on the specific volume of wheat bread. Substitution of WF with GBF influenced color and texture properties of bread. Wheat bread supplemented with 20% GBF had significantly higher scores in taste, aroma, and overall acceptability. This study demonstrated the potential of GBF as a functional ingredient in bread making. PRACTICAL APPLICATION: This study provides a suitable possibility of partial substitution of wheat flour with germinated Bambara groundnut, to develop functional and acceptable bread. The dough mixing and pasting results in this study would add to knowledge on the dough handling characteristics as there is limited information regarding the mixing properties of wheat dough with germinated Bambara groundnut.

Starch-based controlled release fertilizers: A review

Starch, as a widely available renewable resource, has the potential to be used in the production of controlled-release fertilizers (CRFs) that support sustainable agriculture. These CRFs can be formed by incorporating nutrients through coating or absorption, or by chemically modifying the starch to enhance its ability to carry and interact with nutrients. This review examines the various methods of creating starch-based CRFs, including coating, chemical modification, and grafting with other polymers. In addition, the mechanisms of controlled release in starch-based CRFs are discussed. Overall, the potential benefits of using starch-based CRFs in terms of resource efficiency and environmental protection are highlighted.

Strain-dependent assessment of dough's polymer structure and functionality during the baking process

During the baking process, the functionality of the heterogeneous dough matrix changes as the composing polymers experience conformational transition processes. The thermally induced structural changes affect the involvement and functionality of the polymers in the dough matrix. With the main hypothesis being that different types and magnitudes of strain exerted during the measurement would provide information on different structural levels and interactions, SAOS rheology in multiwave mode and large deformation extensional rheometry were applied to two microstructurally different systems. The functionality of the two systems, a highly connected standard wheat dough (φ ≈ 1.1) and an aerated, yeasted wheat dough (φ ≈ 2.3), depicting limited connectivity and strength of interactions, was accessed under different deformations and types of strains. Applying SAOS rheology, starch functionality prevailed on the behavior of the dough matrix. In contrast, gluten functionality prevailed the large deformation behavior. Using an inline fermentation and baking LSF technique, the heat-induced gluten polymerization was shown to increase strain hardening behavior above 70°C. In the aerated system, the strain hardening effect became already evident under small deformation testing, as the expansion of gas cells caused a pre-expansion of the gluten strands. The expanded dough matrix of yeasted dough was further shown to be substantially subjected to degradation once the network reached beyond its maximal gas holding capacity. Using this approach, the combined impact of yeast fermentation and thermal treatment on the strain hardening behavior of wheat dough was revealed for the first time by LSF. Furthermore, the rheological properties were successfully linked to oven rise behavior: a decreasing connectivity combined with the initiation of strain hardening by fast extension processes occurring in the yeasted dough matrix during the final baking phase was linked to limited oven rise functionality prematurely around 60°C.

Individual or mixing extrusion of Tartary buckwheat and adzuki bean: Effect on quality properties and starch digestibility of instant powder

Introduction

Tartary buckwheat and adzuki bean, which are classified as coarse grain, has attracted increasing attention as potential functional ingredient or food source because of their high levels of bioactive components and various health benefits.

Methods

This work investigated the effect of two different extrusion modes including individual extrusion and mixing extrusion on the phytochemical compositions, physicochemical properties and in vitro starch digestibility of instant powder which consists mainly of Tartary buckwheat and adzuki bean flour.

Results

Compared to mixing extrusion, instant powder obtained with individual extrusion retained higher levels of protein, resistant starch, polyphenols, flavonoids and lower gelatinization degree and estimated glycemic index. The α-glucosidase inhibitory activity (35.45%) of the instant powder obtained with individual extrusion was stronger than that obtained with mixing extrusion (26.58%). Lower levels of digestibility (39.65%) and slower digestion rate coefficient (0.25 min^-1) were observed in the instant powder obtained with individual extrusion than in mixing extrusion (50.40%, 0.40 min^-1) by logarithm-of-slope analysis. Moreover, two extrusion modes had no significant impact on the sensory quality of instant powder. Correlation analysis showed that the flavonoids were significantly correlated with physicochemical properties and starch digestibility of the instant powder.

Discussion

These findings suggest that the instant powder obtained with individual extrusion could be used as an ideal functional food resource with anti-diabetic potential.

High moisture extrusion cooking of meat analogs: A review of mechanisms of protein texturization

High-moisture extrusion cooking (HMEC) is an efficient method for converting proteins and polysaccharides into fibrous structure that is used in the industrial production of meat analogs. The purpose of this review is to systematically evaluate current knowledge regarding the modification of protein structure including denaturation and reassembly upon extrusion processing and to correlate this understanding to the structure of the final products. Although there is no consensus on the relative importance of a certain type of bond on extrudates' structure, literature suggests that, regardless of moisture level, these linkages and interactions give rise to distinctive hierarchical order. Both noncovalent and disulfide bonds contribute to the extrudates' fibrous structure. At high water levels, hydrogen and disulfide bonds play a dominant role in extrudates' texture. The process parameters including cooking temperature, screw speed, and moisture content have significant albeit different levels of impact on the texturization process. Their correlation with the ingredients' physiochemical properties provides a greater insight into the process-structure-function relationship of meat analogs. The tendency of protein and polysaccharide blends to phase separate rather than produce a homogeneous mix is a particularly important aspect that leads to the formation of fibrous layers when extruded. This review shows that systematic studies are required to measure and explain synergistic and competitive interactions between proteins and other ingredients such as carbohydrates with a focus on their incompatibility. The wide range of plant protein source can be utilized in the HMEC process to produce texturized products, including meat analogs.

Thermal and Rheological Properties of Gluten-Free, Starch-Based Model Systems Modified by Hydrocolloids

Obtaining good-quality gluten-free products represents a technological challenge; thus, it is important to understand how and why the addition of hydrocolloids influences the properties of starch-based products. To obtain insight into the physicochemical changes imparted by hydrocolloids on gluten-free dough, we prepared several suspensions with different corn starch/potato starch/hydroxpropyl methyl cellulose/xanthan gum/water ratios. Properties of the prepared samples were determined by differential scanning calorimetry and rheometry. Samples with different corn/potato starch ratios exhibited different thermal properties. Xanthan gum and HPMC (hydroxypropyl methyl cellulose) exhibited a strong influence on the rheological properties of the mixtures since they increased the viscosity and elasticity. HPMC and xanthan gum increased the temperature of starch gelatinization, as well as they increased the viscoelasticity of the starch model system. Although the two hydrocolloids affected the properties of starch mixtures in the same direction, the magnitude of their effects was different. Our results indicate that water availability, which plays a crucial role in the starch gelatinization process, could be modified by adding hydrocolloids such as, hydroxypropyl methyl cellulose and xanthan gum. By adding comparatively small amounts of the studied hydrocolloids to starch, one can achieve similar thermo-mechanical effects by the addition of gluten. Understanding these effects of hydrocolloids could contribute to the development of better quality gluten-free bread with optimized ingredient content.

Physiochemical and thermal characterisation of faba bean starch

The structure and physicochemical properties of starch isolated from the cotyledon and hull of faba beans and from wheat (as reference) were examined using 16 different methods. The amylose content in faba bean cotyledon and hull starch was 32% and 36%, respectively, and that in wheat starch was 21%. The faba bean cotyledon and hull starch were structurally alike both displaying C-polymorphic pattern, a similar degree of branching and similar branch chain length distributions. Wheat starch had a significantly greater prevalence of short amylopectin chains (DP < 12) and a higher degree of branching. Granules in both faba bean starches exhibited surface cracks and were more homogenous in size than the smoother wheat starch granules. Gelatinisation temperature was higher for the faba bean starches, likely as an effect of high amylose content and longer starch chains delaying granular swelling. Cotyledon starch produced pastes with the highest viscosities in all rheological measurements, probably owing to larger granules. Higher prevalence of lipids and resistant starch reduced the viscosity values for hull starch. For all starches, viscosity increased at faster heating rates. During the rheological analyses, the samples were exposed to different instruments, heating rates and temperatures ranges, differing from standard rheological procedures, which could help predict how different processing techniques effect the final starch textures.

Graphical abstract

Heat- and shear-reversible networks in food: A review

While nature behaves like an irreversible network with respect to entropy and time, certain systems in nature exist that are, to some extent, reversible. The property of reversibility imparts unique benefits to systems that possess them, making them suitable for designing self-healing, stimuli-responsive, and smart materials that can be used in widely divergent fields. Reversible networks are currently being exploited for applications in tissue engineering, drug delivery, and soft robotics. They are also being utilized as low-calorie fat mimetics with melt-in-your-mouth textures, as well as being explored as potential scaffolds for three-dimensional (3D) printable food, among other applications. This review aims to gather representative examples of heat- and shear-reversible networks in the food science literature from the last 30 or so years, in other words, reversible food gels made either from linear biopolymers or from colloidal, particulate dispersions, including those that have been modified specifically to induce reversibility. An overview of the network mechanisms involved that impart reversibility, including a discussion of the strength and range of forces involved, will be highlighted. A model that explains why certain networks are thermoreversible while others are shear-reversible, and why others are both, will also be proposed. A fundamental understanding of these mechanisms will prove invaluable when designing reversible networks in the future, making possible the precise control of their properties, thus fostering innovative applications within the food industry and beyond.

Effects of Wheat Bran Micronization on the Quality of Reconstituted Whole-Wheat Flour and Its Cooked Noodles

The particle size of wheat bran plays an important role in the quality of reconstituted whole-wheat flour and its products. The effects of wheat bran particle size on the quality of reconstituted whole-wheat flour and its cooked noodles were analyzed; the mean particle size (D50) of wheat bran ranged from 26.05 to 46.08 μm. Results show that the decreases in D50 of wheat bran induced the changes in the quality of whole-wheat flour and its noodles. Specifically, the damaged starch content, water absorption, and the solvent retention capacity of sodium carbonate and sucrose of whole-wheat flour increased at various degrees, while pasting viscosity decreased, and the gluten index and SDS-sedimentation volume increased first and then decreased. The cooking yield, cooking loss, and break rate of fresh noodles decreased first and reached a trough at D50 of 26.05 μm, and then increased. The adhesiveness of cooked noodles increased, the score of smoothness, taste, appearance, and color increased to a stable value, but the hardness, springiness, cohesiveness, resilience, firmness score, and elasticity score increased first and then decreased. These turning points of changing trends of indexes mostly occurred when the D50 of wheat bran was 26.51 μm. In conclusion, whole-wheat noodles with wheat bran of D50 of 26.51 μm addition exhibit better cooking, textural, and sensory properties than those with smaller or larger wheat bran. Excessive crushing of wheat bran not only costs highly in terms of energy, but also has a negative impact on the quality of the noodles.

Evaluation of the Physical Stability of Starch-Based Hydrogels Produced by High-Pressure Processing (HPP)

Starch-based hydrogels are natural polymeric structures with high potential interest for food, cosmeceutical, and pharmaceutical applications. In this study, the physical stability of starch-based hydrogels produced via high-pressure processing (HPP) was evaluated using conventional and accelerated methods. For this purpose, conventional stability measurements, namely swelling power, water activity, texture, and organoleptic properties, as well as microbiological analysis of rice, corn, wheat, and tapioca starch hydrogels, were determined at different time intervals during storage at 20 °C. Additionally, to assess the stability of these structures, accelerated tests based on temperature sweep tests and oscillatory rheological measurements, as well as temperature cycling tests, were performed. The experimental results demonstrated that the physical stability of starch-based HPP hydrogels was interdependently affected by the microorganisms’ action and starch retrogradation, leading to both organoleptic and texture modifications with marked reductions in swelling stability and firmness. It was concluded that tapioca starch hydrogels showed the lowest stability upon storage due to higher incidence of microbial spoilage. Accelerated tests allowed the good stability of HPP hydrogels to be predicted, evidencing good network strength and the ability to withstand temperature changes. Modifications of the rheological properties of corn, rice, and wheat hydrogels were only observed above 39 °C and at stress values 3 to 10 times higher than those necessary to modify commercial hydrogels. Moreover, structural changes to hydrogels after cycling tests were similar to those observed after 90 days of conventional storage. Data obtained in this work can be utilized to design specific storage conditions and product improvements. Moreover, the accelerated methods used in this study provided useful information, allowing the physical stability of starch-based hydrogels to be predicted.

Insights into the Potential of Buckwheat Flour Fractions in Wheat Bread Dough

Buckwheat flour fractions with different particle sizes (PS), comprising various concentrations of valuable nutritional components, represent an opportunity to enhance refined wheat bakery products. The aim of this research was to assess the potential of buckwheat flour (BF) fractions (large, L > 300 μm, medium, 180 μm < M < 300 μm and small, S < 180 μm) to substitute refined wheat flour at 0, 5, 10, 15, and 20% in wheat bread dough and to establish the optimal amount for each fraction. The results revealed significant changes during different bread-making stages and on the finished product. A decrease in falling number index, water absorption, starch gelatinization, elastic modulus, and bread hardness with increasing PS was observed. The increase of BF amount led to an increase in dough development time, speed of protein weakening, gel starch stability, alveograph ratio, rheofermentation properties, maximum creep-recovery compliance, and bread hardness. The optimal values for falling number, mixing–heating–cooling dough parameters, dough biaxial extension, rheofermentation, storage and loss moduli, creep-recovery compliance, loaf volume, and bread hardness were obtained depending on PS based on the generation of predictive models. It was established that the best formulations, with respect to dough rheology and bread characteristics, included BF at 9.13% for large, 10.57% for medium, and 10.25% for small PS.

3D Printing of Textured Soft Hybrid Meat Analogues

Meat analogue is a food product mainly made of plant proteins. It is considered to be a sustainable food and has gained a lot of interest in recent years. Hybrid meat is a next generation meat analogue prepared by the co-processing of both plant and animal protein ingredients at different ratios and is considered to be nutritionally superior to the currently available plant-only meat analogues. Three-dimensional (3D) printing technology is becoming increasingly popular in food processing. Three-dimensional food printing involves the modification of food structures, which leads to the creation of soft food. Currently, there is no available research on 3D printing of meat analogues. This study was carried out to create plant and animal protein-based formulations for 3D printing of hybrid meat analogues with soft textures. Pea protein isolate (PPI) and chicken mince were selected as the main plant protein and meat sources, respectively, for 3D printing tests. Then, rheology and forward extrusion tests were carried out on these selected samples to obtain a basic understanding of their potential printability. Afterwards, extrusion-based 3D printing was conducted to print a 3D chicken nugget shape. The addition of 20% chicken mince paste to PPI based paste achieved better printability and fibre structure.

Effect of Zn-Rich Wheat Bran With Different Particle Sizes on the Quality of Steamed Bread

Bran is the main by-product of wheat milling and the part of the grain with the highest Zn content. We investigated the effects of the particle sizes (coarse, D50 = 375.4 ± 12.3 μm; medium, D50 = 122.3 ± 7.1 μm; and fine, D50 = 60.5 ± 4.2 μm) and addition level (5–20%) of Zn-biofortified bran on the quality of flour and Chinese steamed bread. It was studied to determine if the Zn content of steamed bread could be enhanced without deleterious effects on quality. Dough pasting properties, such as peak viscosity, trough viscosity, final viscosity, breakdown, and setback, decreased significantly as the bran addition level was increased from 5 to 20% but did not significantly differ as a result of different bran particle sizes. Bran incorporation significantly increased hardness, gumminess, chewiness, and adhesiveness, whereas the springiness, cohesiveness, and specific volume of steamed bread decreased with the increase in bran addition. The optimal sensory score of steamed bread samples in the control and Zn fertilizer groups were obtained under 5% bran addition resulting in comparable flavor, and texture relative to control. Meanwhile, the Zn content of the steamed bread in the Zn fertilizer group was 40.2 mg/kg, which was 55.8% higher than that in the control group. Results indicated that adding the appropriate particle size and amount of bran would be an effective and practical way to solve the problem of the insufficient Zn content of steamed bread.

Ready to eat shelf-stable brown rice in pouches: effect of moisture content on product's quality and stability

Despite several nutritional benefits of brown rice (BR) its consumption remains limited compared to white rice. Two of the major barriers to its consumption are long cooking time and limited shelf life. However, those two hurdles can be overcome through the development of shelf-stable BR pouches to create new ready-to-eat (RTE) products, a food category that is gaining important market shares. Nevertheless, scarce information is available on the production and shelf-life stability of ready-to-eat BR products. The first objective of this study was the determination of the optimal moisture range to fully cook BR. The second objective was to determine the effect of moisture content and storage time on two fundamental parameters for consumer's acceptance of rice: color and texture. Three RTE BR pouches with moisture contents of 54%, 57% and 60% were produced and texture and color were evaluated after 1 year of storage. Significant changes in hardness and stickiness were reported during long-term storage. Moisture content negatively affected hardness and positively affected stickiness. Furthermore, storage time and moisture showed a significant effect on rice color. The present results provide information that will be useful to design new RTE meals to promote brown rice consumption.

Effect of Esterification Conditions on the Physicochemical Properties of Phosphorylated Potato Starch

The aim of this study was to evaluate the effect of the temperature (15 or 45 °C) and the duration (15–120 min) of the modification process on the selected physicochemical, thermal, and rheological properties of phosphorylated potato starch. The modified starches contained 93.6–98.2 mg P/100 g (dry weight basis, d.w.b.). Phosphorylation caused color changes with a total color difference between the starches below 0.55, but these changes were less than those that were recognizable by the human eye. The thermal analysis showed two opposite processes appearing during the modification: the loosening of the structure (dominant among starches obtained at 15 °C) and the strengthening of the structure (dominant among starches obtained at 45 °C). The higher phosphorylation temperature reduced native starch recovery from 140% to 87–116% and increased the hysteresis loop area from −169 to 1040. All of the pastes made from the modified starches showed a weaker tendency for retrogradation (during 21 days of storage) than native starches. The results of the regression analysis conducted between the properties of the starch pastes obtained at 45 °C indicated that the modification time appeared to be a better indicator of the rate of modification progress than the phosphorus content. The PCA (principal component analysis) results made it possible to distinguish starch phosphates obtained at 15 °C from those obtained at 45 °C and those from natural starch.

Nutritional and Functional Properties of Gluten-Free Flours

This study characterized and compared 13 gluten-free (GF) flours (rice, brown rice, maize, oat, millet, teff, amaranth, buckwheat, quinoa, chickpea, gram, tiger nut, and plantain) for their nutritional and functional properties. For all GF flours investigated, starch was the major component, except for gram, chickpea, and tiger nut flours with lower starch content (<45%), but higher fiber content (8.8–35.4%). The higher amount of calcium, magnesium, zinc, potassium, phosphorus, similar values for iron and lower content of sodium in gram, makes this flour a good alternative to chickpea or other GF flour to develop healthier food products. Amaranth flour had a high protein digestibility, while tiger nut and millet flours were less digestible. Gram, chickpea, quinoa, buckwheat, and oat flours fulfilled amino acids recommendation for daily adult intake showing no limiting amino acid. Total polyphenolic content and antioxidant capacity showed higher values for buckwheat, followed by quinoa and maize flours. Gram, chickpea, maize, and quinoa flours are good candidates to improve health conditions due to lower saturated fatty acid content. The findings of this study provide useful insights into GF flours and may contribute to the development of novel gluten-free products like bread, cookies, or pasta.

Morphing pasta and beyond

Morphing structures are often engineered with stresses introduced into a flat sheet by leveraging structural anisotropy or compositional heterogeneity. Here, we identify a simple and universal diffusion-based mechanism to enable a transient morphing effect in structures with parametric surface grooves, which can be realized with a single material and fabricated using low-cost manufacturing methods (e.g., stamping, molding, and casting). We demonstrate from quantitative experiments and multiphysics simulations that parametric surface grooving can induce temporary asynchronous swelling or deswelling and can transform flat objects into designed, three-dimensional shapes. By tuning the grooving pattern, we can achieve both zero (e.g., helices) and nonzero (e.g., saddles) Gaussian curvature geometries. This mechanism allows us to demonstrate approaches that could improve the efficiency of certain food manufacturing processes and facilitate the sustainable packaging of food, for instance, by creating morphing pasta that can be flat-packed to reduce the air space in the packaging.

Impact of wheat bran micronization on dough properties and bread quality: Part I - Bran functionality and dough properties

This study aimed to investigate the effect of wheat bran micronization on its functionality including physicochemical and antioxidant properties, and dough properties. Coarse bran (D₅₀ = 362.3 ± 20.5 μm) was superfine ground to medium (D₅₀ = 60.4 ± 10.1 μm) and superfine (D₅₀ = 11.3 ± 2.6 μm) bran, accompanied with increasing specific surface area and breakdown of aleurone layers. Bran micronization increased its soluble dietary fibre content, ferulic acid liberation, and antioxidant properties including total polyphenol content, ABTS•+ and DPPH• scavenging activities, while decreased its water retention capacity and insoluble dietary fibre content. Moreover, bran micronization impacted dough rheological properties. The dough with superfine bran had higher water absorption and gelatinization temperature, peak viscosity, final viscosity and setback value, lower stability time, resistance to extension, and extensibility than the dough with coarse bran. This dough furthermore exhibited more solid-like properties characterized by decreased loss moduli and frequency dependence (n').

Physicochemical characterization of Amaranth starch insulated by mechanical separations

This work focused on the physicochemical properties of isolated Amaranth starch. Inductively coupled plasma (ICP) showed that amaranth is low-lipid calcium and magnesium source for the human diet. Scanning Electron Microscopy showed that isolated granules are in the range of sub and micro size. DSC starch thermogram showed a gelatinization temperature of 67.9 °C and an enthalpy of 10. 6 J/g suggesting the presence of an ordered crystalline structures. High-resolution X-ray diffraction showed the isolated starch contents nanocrystals with an orthorhombic crystalline structure whose pattern was indexed. The pasting profile showed that this kind of starch has an end cold viscosity as a custard, making it useful for infantile formulations. It does not present dynamic viscosity and would not be a problem when swallowed. A very important finding in this work was that the orthorhombic nanocrystals, after solvation during gelatinization, do not contribute to the apparent viscosity development.

Relevance of genipin networking on rheological, physical, and mechanical properties of starch-based formulations

The small amount of proteins in starch-rich food industry byproducts can be an advantage to crosslink with genipin and tailor the performance of biobased films. In this work, genipin was combined with non- purified starch recovered from industrial potato washing slurries and used for films production. Starch recovered from potato washing slurries contained 0.75% protein, 2 times higher than starch directly obtained from potato and 6 times higher than the commercial one. Starch protein-genipin networks were formed with 0.05% and 0.10% genipin, gelatinized at 75 °C and 95 °C in presence of 30% glycerol. Bluish colored films were obtained in all conditions, with the higher surface roughness (Ra, 1.22 μm), stretchability (elongation, 31%), and hydrophobicity (water contact angle, 127°) for 0.10% genipin and starch gelatinized at 75 °C. Therefore, starch-rich byproducts, when combined with genipin, are promising for surpassing the starch-based films hydrophilicity and mechanical fragilities while providing light barrier properties.

Biotechnology and bioengineering of pullulanase: state of the art and perspectives

Pullulanase (EC 3.2.1.41) is a starch-debranching enzyme in the α-amylase family and specifically cleaves α-1,6-glycosidic linkages in starch-type polysaccharides, such as pullulan, β-limited dextrin, glycogen, and amylopectin. It plays a key role in debranching and hydrolyzing starch completely, thus bring improved product quality, increased productivity, and reduced production cost in producing resistant starch, sugar syrup, and beer. Plenty of researches have been made with respects to the discovery of either thermophilic or mesophilic pullulanases, however, few examples meet the demand of industrial application. This review presents the progress made in the recent years from the first aspect of characteristics of pullulanases. The heterologous expression of pullulanases in different microbial hosts and the methods used to improve the expression effectiveness and the regulation of enzyme production are also described. Then, the function evolution of pullulanases from a protein engineering view is discussed. In addition, the immobilization strategy using novel materials is introduced to improve the recyclability of pullulanases. At the same time, we indicate the trends in the future research to facilitate the industrial application of pullulanases.