Self‐healing Polyol/Borax Hydrogels: Fabrications, Properties and Applications

Highly Biocompatible Antibacterial Hydrogel for Wearable Sensing of Macro and Microscale Human Body Motions

Flexible electronics, like electronic skin (e-skin), rely on stretchable conductive materials that integrate diverse components to enhance mechanical, electrical, and interfacial properties. However, poor biocompatibility, bacterial infections, and limited compatibility of functional additives within polymer matrices hinder healthcare sensors' performance. This study addresses these challenges by developing an antibacterial hydrogel using polyvinyl alcohol (PVA), konjac glucomannan (KGM), borax (B), and flower-shaped silver nanoparticles (F-AgNPs), referred as PKB/F-AgNPs hydrogel. The developed hydrogel forms a hierarchical network structure, with a tensile strength of 96 kPa, 83% self-healing efficiency within 60 minutes, and 128% cell viability in Cell Counting Kit-8 (CCK-8) assays, indicating excellent biocompatibility. It also shows strong antibacterial efficacy against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). Blue light irradiation enhances its antibacterial activity by 1.3-fold for E. coli and 2.2-fold for S. aureus. The hydrogel's antibacterial effectiveness is assessed by monitoring changes in electrical conductivity, providing a cost-effective alternative to traditional microbial culture assays. The PKB/F-AgNPs hydrogel's flexibility and electrical conductivity enable it to function as strain sensors for detecting body movements and facial expressions. This antibacterial hydrogel underscores its potential for future human-machine interfaces and wearable electronics.

Effects of the Amylose/Amylopectin Ratio of Starch on Borax-Crosslinked Hydrogels

Herein, we simultaneously prepared borax-crosslinked starch-based hydrogels with enhanced mechanical properties and self-healing ability via a simple one-pot method. The focus of this work is to study the effects of the amylose/amylopectin ratio of starch on the grafting reactions and the performance of the resulting borax-crosslinked hydrogels. An increase in the amylose/ amylopectin ratio increased the gel fraction and grafting ratio but decreased the swelling ratio and pore diameter. Compared with hydrogels prepared from low-amylose starches, hydrogels prepared from high-amylose starches showed pronouncedly increased network strength, and the maximum storage modulus increased by 8.54 times because unbranched amylose offered more hydroxyl groups to form dynamic borate ester bonds with borate ions and intermolecular hydrogen bonds, leading to an enhanced crosslink density. In addition, all the hydrogels exhibited a uniformly interconnected network structure. Furthermore, owing to the dynamic borate ester bonds and hydrogen bonds, the hydrogel exhibited excellent recovery behavior under continuous step strain, and it also showed thermal responsiveness.

Self-healing, antioxidant, and antibacterial Bletilla striata polysaccharide-tannic acid dual dynamic crosslinked hydrogels for tissue adhesion and rapid hemostasis

Biomaterials capable of achieving effective sealing and hemostasis at moist wounds are in high demand in the clinical management of acute hemorrhage. Bletilla striata polysaccharide (BSP), a natural polysaccharide renowned for its hemostatic properties, holds promising applications in biomedical fields. In this study, a dual-dynamic-bonds crosslinked hydrogel was synthesized via a facile one-pot method utilizing poly(vinyl alcohol) (PVA)-borax as a matrix system, followed by the incorporation of BSP and tannic acid (TA). Chemical borate ester bonds formed around borax, coupled with multiple physical hydrogen bonds between BSP and other components, enhanced the mechanical properties and rapid self-healing capabilities. The catechol moieties in TA endowed the hydrogel with excellent adhesive strength of 30.2 kPa on the surface of wet tissues and facilitated easy removal without residue. Benefiting from the synergistic effect of TA and the preservation of the intrinsic properties of BSP, the hydrogel exhibited outstanding biocompatibility, antibacterial, and antioxidant properties. Moreover, it effectively halted acute bleeding within 31.3 s, resulting in blood loss of 15.6 % of that of the untreated group. As a superior hemostatic adhesive, the hydrogel in this study is poised to offer a novel solution for addressing future acute hemorrhage, wound healing, and other biomedical applications.

Crosslinking of Epoxidized Natural Rubber with Borax for Self-Healing and Self-Repairing Properties: pH Dependence

Epoxidized natural rubber (ENR) crosslinked using borax, which exhibits self-healing and self-repairing properties, is successfully developed. The crosslink formation of ENR by using borax under neutral and alkaline conditions is investigated. Fourier transform infrared spectroscopy (FTIR) shows that the borate-ester bond is formed in ENR prepared under both neutral and alkaline conditions, whereas boron nuclear magnetic resonance (11 B-NMR) results exhibit that the ENR prepared under alkaline conditions more actively forms crosslink networks with borax. Moreover, the crosslink density and gel content increase significantly with the presence of borax in alkaline conditions. The crosslink density and gel content of ENR with 10 phr borax are higher by 155% and 36%, respectively, than those of neat ENR. Furthermore, the formation of the crosslinking ENR by borax enhances self-healing and self-repairing properties. The healing efficiency significantly increases from 1.09% to 85.90%, when ENR is developed under alkaline conditions with 30 phr borax. These results represent the first successful demonstration of the efficient use of borax as a crosslinker in ENR, which exhibits its promising self-healing and self-repairing properties under atmospheric conditions without the need for external stimuli. The ENR prepared in this work holds great promise for various self-healing rubber applications.

Recent advances in self-healing polyurethane based on dynamic covalent bonds combined with other self-healing methods

To meet more application requirements, improving mechanical properties and self-healing efficiency has become the focus of current research on self-healing PU. The competitive relationship between self-healing ability and mechanical properties cannot be avoided by a single self-healing method. To address this problem, a growing number of studies have combined dynamic covalent bonding with other self-healing methods to construct the PU structure. This review summarizes recent studies on PU materials that combine typical dynamic covalent bonds with other self-healing methods. It mainly includes four parts: hydrogen bonding, metal coordination bonding, nanofillers combined with dynamic covalent bonding and multiple dynamic covalent bond bonding. The advantages and disadvantages of different self-healing methods and their significant role in improving self-healing ability and mechanical properties in PU networks are analyzed. At the same time, the possible challenges and research directions of self-healing PU materials in the future are discussed.

Self-healing, EMI shielding, and antibacterial properties of recyclable cellulose liquid metal hydrogel sensor

Flexible hydrogels are promising materials for the preparation of artificial intelligence electronics and wearable devices. Introducing a rigid conductive material into the hydrogels can improve their electrical conductivities. However, it may have poor interfacial compatibility with the flexible hydrogel matrix. Therefore, we prepared a hydrogel containing flexible and highly ductile liquid metal (LM). The hydrogel can be used as a strain sensor to monitor human motion. The hydrogel showed many properties (i.e., recyclability, EMI shielding properties (33.14 dB), antibacterial (100 %), strain sensitivity (gauge factor = 2.92), and self-healing) that cannot be achieved simultaneously by a single hydrogel. Furthermore, the recycling of LM and their application to hydrogel-based EMI shielding materials have not been investigated previously. Due to its excellent properties, the prepared flexible hydrogel has great potential for applications in artificial intelligence, personal healthcare, and wearable devices.

Using liquefied biomass hydrogel to mitigate salinity in salt-affected soils

Salinity affects over 33% of irrigated farmland globally. Developing a low-cost, safe, and effective material as a soil salinity mitigation option would be of significant importance. This study proposed to synthesize a hydrogel using liquefied biomass from sugarcane bagasse, polyvinyl alcohol, and sodium tetraborate decahydrate. The effectiveness of the produced hydrogel in mitigating soil salinity was evaluated based on an incubation experiment at two salinity levels (5 and 10 dS m^-1). The experiment was conducted by mixing liquefied hydrogel with soil at four application rates (0, 1, 2, and 3% w/w) with three replications. Porewater and soil samples were tested for pH and electrical conductivity (EC). Soil samples were also analyzed for selected cations and anions. The results demonstrated that hydrogel significantly reduced porewater EC at both 5 and 10 dS m^-1 salt solutions. In addition, hydrogel reduced Cl^-, P, Ca²⁺, and Al³⁺ concentrations in soil samples with maximum reductions observed from 3% hydrogel treatment. However, pH of porewater showed a consistent increase with hydrogel application. The application of hydrogel also increased NH₄-N at high salt level. Overall, hydrogel has shown promising results in reducing soil salinity and could potentially be used as a soil amendment for saline soils.

Customizing nano-chitosan for sustainable drug delivery

Chitosan is a natural polymer with acceptable biocompatibility, biodegradability, and mechanical stability; hence, it has been widely appraised for drug and gene delivery applications. However, there has been no comprehensive assessment to tailor-make chitosan cross-linkers of various types and functionalities as well as complex chitosan-based semi- and full-interpenetrating networks for drug delivery systems (DDSs). Herein, various fabrication methods developed for chitosan hydrogels are deliberated, including chitosan crosslinking with and without diverse cross-linkers. Tripolyphosphate, genipin and multi-functional aldehydes, carboxylic acids, and epoxides are common cross-linkers used in developing biomedical chitosan for DDSs. Methods deployed for modifying the properties and performance of chitosan hydrogels, via their composite production (semi- and full-interpenetrating networks), are also cogitated here. In addition, recent advances in the fabrication of advanced chitosan hydrogels for drug delivery applications such as oral drug delivery, transdermal drug delivery, and cancer therapy are discussed. Lastly, thoughts on what is needed for the chitosan field to continue to grow is also debated in this comprehensive review article.

Degradable polyprodrugs: design and therapeutic efficiency

Prodrugs are developed to increase the therapeutic properties of drugs and reduce their side effects. Polyprodrugs emerged as highly efficient prodrugs produced by the polymerization of one or several drug monomers. Polyprodrugs can be gradually degraded to release therapeutic agents. The complete degradation of polyprodrugs is an important factor to guarantee the successful disposal of the drug delivery system from the body. The degradation of polyprodrugs and release rate of the drugs can be controlled by the type of covalent bonds linking the monomer drug units in the polymer structure. Therefore, various types of polyprodrugs have been developed based on polyesters, polyanhydrides, polycarbonates, polyurethanes, polyamides, polyketals, polymetallodrugs, polyphosphazenes, and polyimines. Furthermore, the presence of stimuli-responsive groups, such as redox-responsive linkages (disulfide, boronate ester, metal-complex, and oxalate), pH-responsive linkages (ester, imine, hydrazone, acetal, orthoester, P-O and P-N), light-responsive (metal-complex, o-nitrophenyl groups) and enzyme-responsive linkages (ester, peptides) allow for a selective degradation of the polymer backbone in targeted tumors. We envision that new strategies providing a more efficient synergistic therapy will be developed by combining polyprodrugs with gene delivery segments and targeting moieties.

Crosslinkers for polysaccharides and proteins: Synthesis conditions, mechanisms, and crosslinking efficiency, a review

Polysaccharides and proteins are important macromolecules for developing hydrogels devoted to biomedical applications. Chemical hydrogels offer chemical, mechanical, and dimensional stability than physical hydrogels due to the chemical bonds among the chains mediated by crosslinkers. There are many crosslinkers to synthesize polysaccharides and proteins based on hydrogels. In this review, we revisited the crosslinking reaction mechanisms between synthetic or natural crosslinkers and polysaccharides or proteins. The selected synthetic crosslinkers were glutaraldehyde, carbodiimide, boric acid, sodium trimetaphosphate, N,N'-methylene bisacrylamide, and polycarboxylic acid, whereas the selected natural crosslinkers included transglutaminase, tyrosinase, horseradish peroxidase, laccase, sortase A, genipin, vanillin, tannic acid, and phytic acid. No less important are the reactions involving click chemistry and the macromolecular crosslinkers for polysaccharides and proteins. Literature examples of polysaccharides or proteins crosslinked by the different strategies were presented along with the corresponding highlights. The general mechanism involved in chemical crosslinking mediated by gamma and UV radiation was discussed, with particular attention to materials commonly used in digital light processing. The evaluation of crosslinking efficiency by gravimetric measurements, rheology, and spectroscopic techniques was presented. Finally, we presented the challenges and opportunities to create safe chemical hydrogels for biomedical applications.

A simple, safe and easily accessible polyvinyl alcohol hydrogel for wound cleaning

Acute wounds are often contaminated by some kind of filth, and fluids are usually used to wash away the dirt, but the force of the fluid may cause secondary injury at the wound site or even increase the risk of infection. Hydrogels have several advantages over liquid scouring since they are less intense, more portable, and easier to control. In this study, poly(vinyl alcohol) was used to prepared a series of hydrogels, which were tested in terms of their properties and abilities to clean simulated dirty wounds. Simulated dirt and bacterial (Serratia marcescens) adhesion experiments demonstrated that they could effectively adhere to a certain amount of dirt or bacteria to achieve the purpose of wound cleaning. In addition to the bacterial adhesion, the antibacterial experiments also proved that the hydrogels have a certain inhibitory effect on the proliferation of E.coli and S.aureus. The hydrogels could change shape freely and exhibited excellent biocompatibility, ductility, and self-healing capabilities, which increase their service life and make them more suitable for treating wounds or acting as protection buffers. Based on all these characteristics, the developed hydrogel may be a potentially valuable material for wound cleaning.

Polysaccharide-based electroconductive hydrogels: Structure, properties and biomedical applications

Architecting an appropriate platform for biomedical applications requires setting a balance between simplicity and complexity. Polysaccharides (PSAs) play essential roles in our life in food resources, structural materials, and energy storage capacitors. Moreover, the diversity and abundance of PSAs have made them an indispensable part of food ingredients and cosmetics. PSA-based hydrogels have been extensively reviewed in biomedical applications. These hydrogels can be designed in different forms to show optimum performance. For instance, electroactive PSA-based hydrogels respond under an electric stimulus. Such performance can be served in stimulus drug release and determining cell fate. This review classifies and discusses the structure, properties, and applications of the most important polysaccharide-based electroactive hydrogels (agarose, alginate, chitosan, cellulose, and dextran) in medicine, focusing on their usage in tissue engineering, flexible electronics, and drug delivery applications.

Irreversible and Self-Healing Electrically Conductive Hydrogels Made of Bio-Based Polymers

Electrically conductive materials that are fabricated based on natural polymers have seen significant interest in numerous applications, especially when advanced properties such as self-healing are introduced. In this article review, the hydrogels that are based on natural polymers containing electrically conductive medium were covered, while both irreversible and reversible cross-links are presented. Among the conductive media, a special focus was put on conductive polymers, such as polyaniline, polypyrrole, polyacetylene, and polythiophenes, which can be potentially synthesized from renewable resources. Preparation methods of the conductive irreversible hydrogels that are based on these conductive polymers were reported observing their electrical conductivity values by Siemens per centimeter (S/cm). Additionally, the self-healing systems that were already applied or applicable in electrically conductive hydrogels that are based on natural polymers were presented and classified based on non-covalent or covalent cross-links. The real-time healing, mechanical stability, and electrically conductive values were highlighted.

Crystalline polysaccharides: A review

The biodegradability and mechanical properties of polysaccharides are dependent on their architecture (linear or branched) as well as their crystallinity (size of crystals and crystallinity percent). The amount of crystalline zones in the polysaccharide significantly governs their ultimate properties and applications (from packaging to biomedicine). Although synthesis, characterization, and properties of polysaccharides have been the subject of several review papers, the effects of crystallization kinetics and crystalline domains on the properties and application have not been comprehensively addressed. This review places focus on different aspects of crystallization of polysaccharides as well as applications of crystalline polysaccharides. Crystallization of cellulose, chitin, chitosan, and starch, as the main members of this family, were discussed. Then, application of the aforementioned crystalline polysaccharides and nano-polysaccharides as well as their physical and chemical interactions were overviewed. This review attempts to provide a complete picture of crystallization-property relationship in polysaccharides.

Polyphenol-Metal Ion Redox-Induced Gelation System for Constructing Plant Protein Adhesives with Excellent Fluidity and Cold-Pressing Adhesion

Soy protein (SP) adhesives can resolve several problems with aldehyde-based adhesives, including formaldehyde release and excessive dependence on petroleum-based materials. Nevertheless, their development is hindered by the lack of balance between fluidity and high cold-pressing adhesive strength. A dynamically cross-linked SP adhesive with excellent fluidity and cold-pressing adhesion was developed in this study based on the polyphenol-metal ion redox-induced gelation system. SP was blended with acrylamide (AM), ammonium persulfate (APS), and the tannic acid (TA)-Fe³⁺ complex to prepare an adhesive gel precursor with good fluidity. In situ gelation of SP adhesive was then achieved via AM polymerization, as initiated by redox between TA and Fe³⁺. As expected, the prepared adhesive gel exhibited outstanding cold-pressing bonding strength (650 kPa) to the veneers compared to the neat SP adhesive, which has almost no cold-pressing bonding strength to the veneers. The TA-Fe³⁺ complex induced an in situ gelation system, which endowed the SP adhesive with strong cohesion; the topological entanglement of the adhesive gel in the veneers contributed to tight interfacial combinations. The TA-Fe³⁺ complex served not only as an accelerator of SP adhesive gelation but also as a "cross-linking core" for the cross-link SP adhesive system. The prepared SP-based adhesive also exhibited outstanding hot-pressing bonding strength and mildew resistance. The proposed polyphenol-metal ion-induced in situ gelation strategy may provide a new approach for developing advanced vegetable protein adhesives to replace aldehyde adhesives.

Double dynamic hydrogels formed by wormlike surfactant micelles and cross-linked polymer

HYPOTHESIS

Interpenetrating networks consisting of a polymer network with dynamic cross-links and a supramolecular network allow obtaining hydrogels with significantly enhanced mechanical properties.

EXPERIMENTS

Binary hydrogels composed of a dynamically cross-linked poly(vinyl alcohol) (PVA) network and a transient network of entangled highly charged mixed wormlike micelles (WLMs) of surfactants (potassium oleate and n-octyltrimethylammonium bromide) were prepared and studied by rheometry, SANS, USANS, cryo-TEM, and NMR spectroscopy.

FINDINGS

Binary hydrogels show significantly enhanced rheological properties (a 3400-fold higher viscosity and 27-fold higher plateau modulus) as compared to their components taken separately. This is due to the microphase separation leading to local concentrating of PVA and WLMs providing larger number of polymer-polymer contacts for cross-linking and longer WLMs with more entanglements. Such materials are very promising for the application in many areas, ranging from enhanced oil recovery to biomedical uses.

Rapid self-healing and self-adhesive chitosan-based hydrogels by host-guest interaction and dynamic covalent bond as flexible sensor

A sensor used to monitor tissue deformation requires good flexibility, stretchability, self-adhesion, cyto-compatibility, and antibacterial property. Here, we prepared hydrogel sensor based on O-carboxymethyl chitosan (O-CMCS) and poly(vinyl alcohol) (PVA) for monitoring human and organ motions. Based on the host-guest complexing of poly(β-cyclodextrin) with diamantane, a cross-linker containing multiple aldehyde groups was prepared for cross-linking with O-CMCS through Schiff base linkages. Borax was used as the second cross-linker to cross-link PVA through dynamic borate ester bonds. Carbon nanotubes (CNTs) were added into the hydrogels to improve their electrical conductivity and mechanical properties. The obtained hydrogel exhibited rapid self-healing ability with healing efficiency as high as 97%-103% (in 15 s), good adhesion to human skin and wet organ, good antibacterial property, cyto-compatibility, and stretchability. Furthermore, the hydrogel sensor can monitor the respiratory movement of porcine lungs and the beating of rat hearts.

Development of Hydrogels with Self-Healing Properties for Delivery of Bioactive Agents

Hydrogels are an important class of soft materials that find use in bioactive agent delivery. Because of their high water content, hydrogels generally show poor mechanical strength. Long-term wear and tear in physiological conditions may lead to damage in the hydrogel structure during the delivery of bioactive agents. This results in burst and uncontrolled agent release. One strategy to solve this problem is to incorporate self-healing properties into a hydrogel so that the hydrogel can heal fractures automatically to restore original mechanical properties. The objectives of this article are to revisit the latest advances in the design of self-healing hydrogel-based carriers and to offer insights into further research to translate these carriers from the laboratory to real applications.

A Multifunctional, Self-Healing, Self-Adhesive, and Conductive Sodium Alginate/Poly(vinyl alcohol) Composite Hydrogel as a Flexible Strain Sensor

Hydrogel-based wearable devices have attracted tremendous interest due to their potential applications in electronic skins, soft robotics, and sensors. However, it is still a challenge for hydrogel-based wearable devices to be integrated with high conductivity, a self-healing ability, remoldability, self-adhesiveness, good mechanical strength and high stretchability, good biocompatibility, and stimulus-responsiveness. Herein, multifunctional conductive composite hydrogels were fabricated by a simple one-pot method based on poly(vinyl alcohol) (PVA), sodium alginate (SA), and tannic acid (TA) using borax as a cross-linker. The composite hydrogel network was built by borate ester bonds and hydrogen bonds. The obtained hydrogel exhibited pH- and sugar-responsiveness, high stretchability (780% strain), and fast self-healing performance with healing efficiency (HE) as high as 93.56% without any external stimulus. Additionally, the hydrogel displayed considerable conductive behavior and stable changes of resistance with high sensitivity (gauge factor (GF) = 15.98 at a strain of 780%). The hydrogel was further applied as a strain sensor for monitoring large and tiny human motions with durable stability. Significantly, the healed hydrogel also showed good sensing behavior. This work broadens the avenue for the design and preparation of biocompatible polymer-based hydrogels to promote the application of hydrogel sensors with comfortable wearing feel and high sensitivity.

Antimicrobial/Biocompatible Hydrogels Dual-Reinforced by Cellulose as Ultrastretchable and Rapid Self-Healing Wound Dressing

Hydrogels as a wound dressing, integrated with ultrastretchability, rapid self-healing, and excellent antimicrobial activity, are in high demand, particularly for joint skin wound healing. Herein, a multifunctional and ductile composite hydrogel was developed using poly(vinyl alcohol) (PVA)-borax gel as a matrix that was synergized or dual-reinforced with dopamine-grafted oxidized carboxymethyl cellulose (OCMC-DA) and cellulose nanofibers (CNF). Moreover, neomycin (NEO), an aminoglycoside antibiotic with multifunctional groups, was incorporated into the hydrogel network as both an antibacterial agent and a cross-linker. The dynamic reversible borate ester linkages and hydrogen bonds between OCMC-DA, PVA, and CNF, along with dynamic cross-linking imine linkages between NEO and OCMC-DA, endowed the hydrogel with excellent self-healing ability and stretchability (3300%). The as-reinforced networks enhanced the mechanical properties of hydrogels significantly. More remarkably, the composite hydrogel with improved biodegradability and biocompatibility is pH-responsive and effective against a broad spectrum of bacteria, which is attributed to the controllable release of NEO for steady availability of the antibiotic on the wound location. Overall, the antimicrobial hydrogel with rapid self-healing and reliable mechanical properties holds significant promise as dressing material for wound healing.

Basic Approaches to the Design of Intrinsic Self-Healing Polymers for Triboelectric Nanogenerators

Triboelectric nanogenerators (TENGs) as a revolutionary system for harvesting mechanical energy have demonstrated high vitality and great advantage, which open up great prospects for their application in various areas of the society of the future. The past few years have seen exponential growth in many new classes of self-healing polymers (SHPs) for TENGs. This review presents and evaluates the SHP range for TENGs, and also attempts to assess the impact of modern polymer chemistry on the development of advanced materials for TENGs. Among the most widely used SHPs for TENGs, the analysis of non-covalent (hydrogen bond, metal-ligand bond), covalent (imine bond, disulfide bond, borate bond) and multiple bond-based SHPs in TENGs has been performed. Particular attention is paid to the use of SHPs with shape memory as components of TENGs. Finally, the problems and prospects for the development of SHPs for TENGs are outlined.