Biodegradation of perfluorinated compounds

Per- and polyfluoroalkyl substances (PFAS) as contaminants in groundwater resources - A comprehensive review of subsurface transport processes

Per- and polyfluorinated alkyl substances (PFAS) are persistent contaminants in the environment. An increased awareness of adverse health effects related to PFAS has further led to stricter regulations for several of these substances in e.g. drinking water in many countries. Groundwater constitutes an important source of raw water for drinking water production. A thorough understanding of PFAS subsurface fate and transport mechanisms leading to contamination of groundwater resources is therefore essential for management of raw water resources. A review of scientific literature on the subject of processes affecting subsurface PFAS fate and transport was carried out. This article compiles the current knowledge of such processes, mainly focusing on perfluoroalkyl acids (PFAA), in soil- and groundwater systems. Further, a compilation of data on transport parameters such as solubility and distribution coefficients, as well as, insight gained and conclusions drawn from the reviewed material are presented. As the use of certain fire-fighting foams has been identified as the major source of groundwater contamination in many countries, research related to this type of pollution source has been given extra focus. Uptake of PFAS in biota is outside the scope of this review. The review showed a large spread in the magnitude of distribution coefficients and solubility for individual PFAS. Also, it is clear that the influence of multiple factors makes site-specific evaluation of distribution coefficients valuable. This article aims at giving the reader a comprehensive overview of the subject, and providing a base for further work.

Are Geotextiles Silent Contributors of Ultrashort Chain PFASs to the Environment?

We investigated the presence of per- and poly fluoroalkyl substances (PFASs) in woven and nonwoven polypropylene geotextiles and four nonwoven polyester geotextiles commonly used in modern geosynthetic composite lining systems for waste containment facilities such as landfills. Targeted analysis for 23 environmentally significant PFAS molecules and methods for examining "PFAS total" concentrations were utilized to assess their occurrence in geotextiles. This analysis showed that most geotextile specimens evaluated in the current investigation contained the ultrashort chain PFAS compound pentafluoropropionic acid (PFPrA). While the concentrations ranged from nondetectable to 10.84 μg/g, the average measured concentrations of PFPrA were higher in polypropylene than in polyester geotextiles. "PFAS total" parameters comprising total fluorine (TF) and total oxidizable precursors (TOPs) indicate that no significant precursor mass nor untargeted intermediates were present in geotextiles. Therefore, this study identified geotextiles as a possible source of ultrashort PFASs in engineered lined waste containment facilities, which may contribute to the overall PFAS total concentrations in leachates or liquors they are in contact with. The findings reported for the first time herein may lead to further implications on the fate and migration of PFASs in geosynthetic composite liners, as previously unidentified concentrations, particularly of ultrashort-chain PFASs, may impact the extent of PFAS migration through and attenuation by constituents of geosynthetic composite liner systems. Given the widespread use of geotextiles in various engineering activities, these findings may have other unknown impacts. The significance of these findings needs to be further elucidated by more extensive studies with larger geotextile sample sizes to allow broader, generalized conclusions to be drawn.

Electron-bifurcation and fluoride efflux systems in Acetobacterium spp. drive defluorination of perfluorinated unsaturated carboxylic acids

Enzymatic cleavage of C-F bonds in per- and polyfluoroalkyl substances (PFAS) is largely unknown but avidly sought to promote systems biology for PFAS bioremediation. Here, we report the reductive defluorination of α, β-unsaturated per- and polyfluorocarboxylic acids by Acetobacterium spp. Two critical molecular features in Acetobacterium species enabling reductive defluorination are (i) a functional fluoride efflux transporter (CrcB) and (ii) an electron-bifurcating caffeate reduction pathway (CarABCDE). The fluoride transporter was required for detoxification of released fluoride. Car enzymes were implicated in defluorination by the following evidence: (i) only Acetobacterium spp. with car genes catalyzed defluorination; (ii) caffeate and PFAS competed in vivo ; (iii) models from the X-ray structure of the electron-bifurcating reductase (CarC) positioned the PFAS substrate optimally for reductive defluorination; (iv) products identified by 19 F-NMR and high-resolution mass spectrometry were consistent with the model. Defluorination biomarkers identified here were found in wastewater treatment plant metagenomes on six continents.

Non-Fluorine Oil Repellency: How Low the Intrinsic Wetting Threshold Can Be for Roughness-Induced Contact Angle Amplification?

Surface chemistries for realizing oil repellency are mostly based on perfluoro compounds (PFCs) owing to their low surface energy. However, PFCs are not sustainable because of their persistent and bioaccumulative properties, and their usage, even short-chain ones, has begun to be phased out. To date, studies on non-fluorine oil repellency have been extremely rare, and the obtained oil repellency has been limited. Here, we report the non-fluorine oil repellency of a coating prepared on a tightly woven plain-weave fabric through hydrolysis and polycondensation of difunctional chlorosilane. The coated fabric exhibited a contact angle of 119.0° for castor oil and 81.4° for hexadecane, as well as a contact angle of 51.9° for decane with a surface tension as low as γ_LV = 23.5 mN m^-1. According to the standard ISO 14419:2010, oil repellency was rated Grade 6. The solid surface tension of the coating was calculated to be γ_SV = 22.1 mN m^-1. Through the test of the difference in contact angles between rough and smooth surfaces, the intrinsic wetting threshold (θ_IWT) for such a surface chemistry was determined to be ranging from 8.9 to 14.5°. A study on the effects of surface morphologies suggests that the realization of an oil-repellency rating of 6 and a θ_IWT as low as 8.9-14.5° strongly depends on the roughness topographies. We hope that this study will be useful for the design─and our understanding─of non-fluorine oil repellency for applications including stain-resistant textiles and grease-resistant food packaging.

A Lipid-Inspired Highly Adhesive Interface for Durable Superhydrophobicity in Wet Environments and Stable Jumping Droplet Condensation

Creating thin (<100 nm) hydrophobic coatings that are durable in wet conditions remains challenging. Although the dropwise condensation of steam on thin hydrophobic coatings can enhance condensation heat transfer by 1000%, these coatings easily delaminate. Designing interfaces with high adhesion while maintaining a nanoscale coating thickness is key to overcoming this challenge. In nature, cell membranes face this same challenge where nanometer-thick lipid bilayers achieve high adhesion in wet environments to maintain integrity. Nature ensures this adhesion by forming a lipid interface having two nonpolar surfaces, demonstrating high physicochemical resistance to biofluids attempting to open the interface. Here, developing an artificial lipid-like interface that utilizes fluorine-carbon molecular chains can achieve durable nanometric hydrophobic coatings. The application of our approach to create a superhydrophobic material shows high stability during jumping-droplet-enhanced condensation as quantified from a continual one-year steam condensation experiment. The jumping-droplet condensation enhanced condensation heat transfer coefficient up to 400% on tube samples when compared to filmwise condensation on bare copper. Our bioinspired materials design principle can be followed to develop many durable hydrophobic surfaces using alternate substrate-coating pairs, providing stable hydrophobicity or superhydrophobicity to a plethora of applications.

Bioremediation of Perfluoroalkyl Substances (PFAS) by Anaerobic Digestion: Effect of PFAS on Different Trophic Groups and Methane Production Accelerated by Carbon Materials

Per- and polyfluoroalkyl substances (PFAS) are recalcitrant pollutants which tend to persist in soils and aquatic environments and their remediation is among the most challenging with respect to organic pollutants. Anaerobic digestion (AD) supplemented with low amounts of carbon materials (CM), acting as electron drivers, has proved to be an efficient process for the removal of organic compounds from wastewater. This work explores the impact of PFAS on different trophic groups in anaerobic communities, and the effect of carbon nanotubes (CNT), activated carbon (AC), and oxidized AC (AC-HNO₃), as electron shuttles on the anaerobic bioremoval of these compounds, based on CH₄ production. The inhibition of the specific methanogenic activity (SMA) exerted by perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), at a concentration of 0.1 mg L⁻¹, was below 10% for acetoclastic and below 15%, for acetogenic communities. Hydrogenotrophic methanogens were not affected by the presence of PFAS. All CM reduced the negative impact of PFAS on the CH₄ production rate, but AC was the best. Moreover, the methanization percentage (MP) of sewage sludge (SS) increased 41% in the presence of PFOS (1.2 g L⁻¹) and AC. In addition, AC fostered an increase of 11% in the MP of SS+PFOS, relative to the condition without AC. AC promoted detoxification of PFOA- and PFOS-treated samples by 51% and 35%, respectively, as assessed by Vibrio fischeri assays, demonstrating the advantage of bringing AD and CM together for PFAS remediation.

Experimental insights into anodic oxidation of hexafluoropropylene oxide dimer acid (GenX) on boron-doped diamond anodes

GenX is the trade name of the ammonium salt of hexafluoropropylene oxide dimer acid (HFPO-DA) and is used as a replacement for the banned perfluorooctanoic acid (PFOA). However, recent studies have found GenX to be more toxic than PFOA. This work deals with the electrochemical degradation of HFPO-DA using boron-doped diamond anodes. For the first time, an experimental study was conducted to investigate the influence of sulfate concentration and other operating parameters on HFPO-DA degradation. Results demonstrated that sulfate radicals were ineffective in HFPO-DA degradation due to steric hindrance by -CF₃ branch. Direct electron transfer was found as the rate-determining step. By comparing degradation of HFPO-DA with that of PFOA, it was observed that the steric hindrance by -CF₃ branch in HFPO-DA decreased the rate of electron transfer from the carboxyl head group even though its defluorination rate was faster. Conclusively, a degradation pathway is proposed in which HFPO-DA mineralizes to CO₂ and F- via formation of three intermediates.

Per- and Polyfluoroalkyl Substances (PFAS) in Integrated Crop-Livestock Systems: Environmental Exposure and Human Health Risks

Per- and polyfluoroalkyl substances (PFAS) are highly persistent synthetic organic contaminants that can cause serious human health concerns such as obesity, liver damage, kidney cancer, hypertension, immunotoxicity and other human health issues. Integrated crop–livestock systems combine agricultural crop production with milk and/or meat production and processing. Key sources of PFAS in these systems include firefighting foams near military bases, wastewater sludge and industrial discharge. Per- and polyfluoroalkyl substances regularly move from soils to nearby surface water and/or groundwater because of their high mobility and persistence. Irrigating crops or managing livestock for milk and meat production using adjacent waters can be detrimental to human health. The presence of PFAS in both groundwater and milk have been reported in dairy production states (e.g., Wisconsin and New Mexico) across the United States. Although there is a limit of 70 parts per trillion of PFAS in drinking water by the U.S. EPA, there are not yet regional screening guidelines for conducting risk assessments of livestock watering as well as the soil and plant matrix. This systematic review includes (i) the sources, impacts and challenges of PFAS in integrated crop–livestock systems, (ii) safety measures and protocols for sampling soil, water and plants for determining PFAS concentration in exposed integrated crop–livestock systems and (iii) the assessment, measurement and evaluation of human health risks related to PFAS exposure.

Bioremediation of Per- and Poly-Fluoroalkyl Substances (PFAS) by Synechocystis sp. PCC 6803: A Chassis for a Synthetic Biology Approach

One of the main concerns in industrialized countries is represented by per- and poly-fluoroalkyl substances (PFAS), persistent contaminants hardly to be dealt with by conventional wastewater treatment processes. Phyco-remediation was proposed as a green alternative method to treat wastewater. Synechocystis sp. PCC6803 is a unicellular photosynthetic organism candidate for bioremediation approaches based on synthetic biology, as it is able to survive in a wide range of polluted waters. In this work, we assessed the possibility of applying Synechocystis in PFAS-enriched waters, which was never reported in the previous literature. Respirometry was applied to evaluate short-term toxicity of perfluorooctanoic acid (PFOA) and perfluorooctane sulfonate (PFOS), which did not affect growth up to 0.5 and 4 mg L-1, respectively. Continuous and batch systems were used to assess the long-term effects, and no toxicity was highlighted for both compounds at quite high concentration (1 mg L-1). A partial removal was observed for PFOS and PFOA, (88% and 37%, with removal rates of about 0.15 and 0.36 mg L-1 d-1, respectively). Measurements in fractionated biomass suggested a role for Synechocystis in the sequestration of PFAS: PFOS is mainly internalized in the cell, while PFOA is somehow transformed by still unknown pathways. A preliminary bioinformatic search gave hints on transporters and enzymes possibly involved in such sequestration/transformation processes, opening the route to metabolic engineering in the perspective application of this cyanobacterium as a new phyco-remediation tool, based on synthetic biology.

Addressing Urgent Questions for PFAS in the 21st Century

Despite decades of research on per- and polyfluoroalkyl substances (PFAS), fundamental obstacles remain to addressing worldwide contamination by these chemicals and their associated impacts on environmental quality and health. Here, we propose six urgent questions relevant to science, technology, and policy that must be tackled to address the "PFAS problem": (1) What are the global production volumes of PFAS, and where are PFAS used? (2) Where are the unknown PFAS hotspots in the environment? (3) How can we make measuring PFAS globally accessible? (4) How can we safely manage PFAS-containing waste? (5) How do we understand and describe the health effects of PFAS exposure? (6) Who pays the costs of PFAS contamination? The importance of each question and barriers to progress are briefly described, and several potential paths forward are proposed. Given the diversity of PFAS and their uses, the extreme persistence of most PFAS, the striking ongoing lack of fundamental information, and the inequity of the health and environmental impacts from PFAS contamination, there is a need for scientific and regulatory communities to work together, with cooperation from PFAS-related industries, to fill in critical data gaps and protect human health and the environment.

Ultra-thin self-healing vitrimer coatings for durable hydrophobicity

Durable hydrophobic materials have attracted considerable interest in the last century. Currently, the most popular strategy to achieve hydrophobic coating durability is through the combination of a perfluoro-compound with a mechanically robust matrix to form a composite for coating protection. The matrix structure is typically large (thicker than 10 μm), difficult to scale to arbitrary materials, and incompatible with applications requiring nanoscale thickness such as heat transfer, water harvesting, and desalination. Here, we demonstrate durable hydrophobicity and superhydrophobicity with nanoscale-thick, perfluorinated compound-free polydimethylsiloxane vitrimers that are self-healing due to the exchange of network strands. The polydimethylsiloxane vitrimer thin film maintains excellent hydrophobicity and optical transparency after scratching, cutting, and indenting. We show that the polydimethylsiloxane vitrimer thin film can be deposited through scalable dip-coating on a variety of substrates. In contrast to previous work achieving thick durable hydrophobic coatings by passively stacking protective structures, this work presents a pathway to achieving ultra-thin (thinner than 100 nm) durable hydrophobic films.

Perfluoroalkylated Substances (PFAS) Associated with Microplastics in a Lake Environment

The presence of both microplastics and per- and polyfluoroalkyl substances (PFAS) is ubiquitous in the environment. The ecological impacts associated with their presence are still poorly understood, however, these contaminants are extremely persistent. Although plastic in the environment can concentrate pollutants, factors such as the type of plastic and duration of environmental exposure as it relates to the degree of adsorption have received far less attention. To address these knowledge gaps, experiments were carried out that examined the interactions of PFAS and microplastics in the field and in a controlled environment. For field experiments, we measured the abundance of PFAS on different polymer types of microplastics that were deployed in a lake for 1 month and 3 months. Based on these results, a controlled experiment was conducted to assess the adsorption properties of microplastics in the absence of associated inorganic and organic matter. The adsorption of PFAS was much greater on the field-incubated plastic than what was observed in the laboratory with plastic and water alone, 24 to 259 times versus one-seventh to one-fourth times background levels. These results suggest that adsorption of PFAS by microplastics is greatly enhanced by the presence of inorganic and/or organic matter associated with these materials in the environment, and could present an environmental hazard for aquatic biota.

Cross-Linking Strategies for Fluorine-Containing Polymer Coatings for Durable Resistant Water- and Oil-Repellency

Functional coatings for application on surfaces are of growing interest. Especially in the textile industry, durable water and oil repellent finishes are of special demand for implementation in the outdoor sector, but also as safety-protection clothes against oil or chemicals. Such oil and chemical repellent textiles can be achieved by coating surfaces with fluoropolymers. As many concerns exist regarding (per)fluorinated polymers due to their high persistence and accumulation capacity in the environment, a durable and resistant coating is essential also during the washing processes of textiles. Within the present study, different strategies are examined for a durable resistant cross-linking of a novel fluoropolymer on the surface of fibers. The monomer 2-((1,1,2-trifluoro-2-(perfluoropropoxy)ethyl)thio)ethyl acrylate, whose fluorinated side-chain is degradable by treatment with ozone, was used for this purpose. The polymers were synthesized via free radical polymerization in emulsion, and different amounts of cross-linking reagents were copolymerized. The final polymer dispersions were applied to cellulose fibers and the cross-linking was induced thermally or by irradiation with UV-light. In order to investigate the cross-linking efficiency, tensile elongation studies were carried out. In addition, multiple washing processes of the fibers were performed and the polymer loss during washing, as well as the effects on oil and water repellency were investigated. The cross-linking strategy paves the way to a durable fluoropolymer-based functional coating and the polymers are expected to provide a promising and sustainable alternative to functional coatings.

Challenges and Current Status of the Biological Treatment of PFAS-Contaminated Soils

Per- and polyfluoroalkyl substances (PFAS) are Synthetic Organic Compounds (SOCs) which are of current concern as they are linked to a myriad of adverse health effects in mammals. They can be found in drinking water, rivers, groundwater, wastewater, household dust, and soils. In this review, the current challenge and status of bioremediation of PFAs in soils was examined. While several technologies to remove PFAS from soil have been developed, including adsorption, filtration, thermal treatment, chemical oxidation/reduction and soil washing, these methods are expensive, impractical for in situ treatment, use high pressures and temperatures, with most resulting in toxic waste. Biodegradation has the potential to form the basis of a cost-effective, large scale in situ remediation strategy for PFAS removal from soils. Both fungal and bacterial strains have been isolated that are capable of degrading PFAS; however, to date, information regarding the mechanisms of degradation of PFAS is limited. Through the application of new technologies in microbial ecology, such as stable isotope probing, metagenomics, transcriptomics, and metabolomics there is the potential to examine and identify the biodegradation of PFAS, a process which will underpin the development of any robust PFAS bioremediation technology.

Pseudomonas sp. Strain 273 Degrades Fluorinated Alkanes

Fluorinated organic compounds have emerged as environmental constituents of concern. We demonstrate that the alkane degrader Pseudomonas sp. strain 273 utilizes terminally monofluorinated C₇-C₁₀ alkanes and 1,10-difluorodecane (DFD) as the sole carbon and energy sources in the presence of oxygen. Strain 273 degraded 1-fluorodecane (FD) (5.97 ± 0.22 mM, nominal) and DFD (5.62 ± 0.13 mM, nominal) within 7 days of incubation, and 92.7 ± 3.8 and 90.1 ± 1.9% of the theoretical maximum amounts of fluorine were recovered as inorganic fluoride, respectively. With n-decane, strain 273 attained (3.24 ± 0.14) × 10⁷ cells per μmol of carbon consumed, while lower biomass yields of (2.48 ± 0.15) × 10⁷ and (1.62 ± 0.23) × 10⁷ cells were measured with FD or DFD as electron donors, respectively. The organism coupled decanol and decanoate oxidation to denitrification, but the utilization of (fluoro)alkanes was strictly oxygen-dependent, presumably because the initial attack on the terminal carbon requires oxygen. Fluorohexanoate was detected as an intermediate in cultures grown with FD or DFD, suggesting that the initial attack on the fluoroalkanes can occur on the terminal methyl or fluoromethyl groups. The findings indicate that specialized bacteria such as Pseudomonas sp. strain 273 can break carbon-fluorine bonds most likely with oxygenolytic enzyme systems and that terminally monofluorinated alkanes are susceptible to microbial degradation. The findings have implications for the fate of components associated with aqueous film-forming foam (AFFF) mixtures.

Reductive Defluorination and Mechanochemical Decomposition of Per- and Polyfluoroalkyl Substances (PFASs): From Present Knowledge to Future Remediation Concepts

Over the past two decades, per- and polyfluoroalkyl substances (PFASs) have emerged as worldwide environmental contaminants, calling out for sophisticated treatment, decomposition and remediation strategies. In order to mineralize PFAS pollutants, the incineration of contaminated material is a state-of-the-art process, but more cost-effective and sustainable technologies are inevitable for the future. Within this review, various methods for the reductive defluorination of PFASs were inspected. In addition to this, the role of mechanochemistry is highlighted with regard to its major potential in reductive defluorination reactions and degradation of pollutants. In order to get a comprehensive understanding of the involved reactions, their mechanistic pathways are pointed out. Comparisons between existing PFAS decomposition reactions and reductive approaches are discussed in detail, regarding their applicability in possible remediation processes. This article provides a solid overview of the most recent research methods and offers guidelines for future research directions.

Long-term investigation on the removal of perfluoroalkyl substances in a full-scale drinking water treatment plant in the Veneto Region, Italy

Drinking water contamination by perfluoroalkyl and polyfluoroalkyl substances (PFASs) is an issue of relatively recent concern. The literature indicates that anion exchange resins and granular activated carbon (GAC) are suitable technologies for removing these compounds. While several laboratory-scale and pilot-scale experiments have been conducted to study activated carbon adsorption/desorption mechanisms of a number of PFASs, little data on full-scale plants are available. This work examines a real case of groundwater contamination by PFASs in an area of approximately 200 km². The performance of the main drinking water treatment plant in the area (flowrate = 30,000 m³/d; 100,000 people served), which is equipped with GAC filters, was analysed. Approximately 17,000 analytical data points from a working period of five years were processed. Perfluorobutyric acid (PFBA) was the first compound to attain breakthrough, followed by perfluoropentanoic acid, perfluorohexanoic acid, perfluorobutanesulfonic acid, and perfluorooctanoic acid (PFOA). The adsorption capacity and treated bed volumes at complete breakthrough (saturation) were calculated, and ranged from 1.71 g/t and 7100 (PFBA) to 24.6 g/t and 50,900 (PFOA), with the total organic carbon concentration in the groundwater ranging from <0.1 to 0.5 mg/L. The overall adsorption capacity was approximately 40 g of total PFASs/t. The breakthrough behaviour of PFASs was correlated with the CF chain length, the type of hydrophilic head (either carboxyl or sulfonic), and the n-octanol/water partition coefficients logP and logD. The results corroborate the findings of previously published bench-scale and pilot-scale experiments.

Perfluorobutane sulfonate exposure disrupted human placental cytotrophoblast cell proliferation and invasion involving in dysregulating preeclampsia related genes

We reported that maternal PFBS, an emerging pollutant, exposure is positively associated with preeclampsia which can result from aberrant trophoblasts invasion and subsequent placental ischemia. In this study, we investigated the effects of PFBS on trophoblasts proliferation/invasion and signaling pathways. We exposed a human trophoblast line, HTR8/SVneo, to PFBS. Cell viability, proliferation, and cell cycle were evaluated by the MTS assay, Ki-67 staining, and flow cytometry, respectively. We assessed cell migration and invasion with live-cell imaging-based migration assay and matrigel invasion assay, respectively. Signaling pathways were examined by Western blot, RNA-seq, and qPCR. PFBS exposure interrupted cell proliferation and invasion in a dose-dependent manner. PFBS (100 μM) did not cause cell death but instead significant cell proliferation without cell cycle disruption. PFBS (10 and 100 μM) decreased cell migration and invasion, while PFBS (0.1 μM) significantly increased cell invasion but not migration. Further, RNA-seq analysis identified dysregulated HIF-1α target genes that are relevant to cell proliferation/invasion and preeclampsia, while Western Blot data showed the activation of HIF-1α, but not Notch, ERK1/2, (PI3K)AKT, and P38 pathways. PBFS exposure altered trophoblast cell proliferation/invasion which might be mediated by preeclampsia-related genes, suggesting a possible association between prenatal PFBS exposure and adverse placentation.

Carbon-fluorine bond cleavage mediated by metalloenzymes

Fluorochemicals are a widely distributed class of compounds and have been utilized across a wide range of industries for decades. Given the environmental toxicity and adverse health threats of some fluorochemicals, the development of new methods for their decomposition is significant to public health. However, the carbon-fluorine (C-F) bond is among the most chemically robust bonds; consequently, the degradation of fluorinated hydrocarbons is exceptionally difficult. Here, metalloenzymes that catalyze the cleavage of this chemically challenging bond are reviewed. These enzymes include histidine-ligated heme-dependent dehaloperoxidase and tyrosine hydroxylase, thiolate-ligated heme-dependent cytochrome P450, and four nonheme oxygenases, namely, tetrahydrobiopterin-dependent aromatic amino acid hydroxylase, 2-oxoglutarate-dependent hydroxylase, Rieske dioxygenase, and thiol dioxygenase. While much of the literature regarding the aforementioned enzymes highlights their ability to catalyze C-H bond activation and functionalization, in many cases, the C-F bond cleavage has been shown to occur on fluorinated substrates. A copper-dependent laccase-mediated system representing an unnatural radical defluorination approach is also described. Detailed discussions on the structure-function relationships and catalytic mechanisms provide insights into biocatalytic defluorination, which may inspire drug design considerations and environmental remediation of halogenated contaminants.

The phase out of and restrictions on per-and polyfluoroalkyl substances: Time for a rethink

Industrial manufacture boom in the past decades had resulted in the release of new chemicals to the environment. A group of manmade chemicals called per-and polyfluoroalkyl substances (PFASs) are among these chemicals that have gained traction in recent years which are used in myriad consumer and industrial products worldwide. Since some PFASs are persistent, bioaccumulative, and toxic in nature, series of programs and regulatory initiatives have been introduced to end their production; and gradually replacing them with short chain alternatives. However, concerns have been expressed in the scientific literature about the characteristics and effects of some of these short chain alternatives on environmental and living systems. Here, we suggest that professional scientific bodies should be part of the review process of alternatives short chain PFASs, owing to their immeasurable contribution to knowledge and understanding of these chemicals. Per and poly fluoroalkyl substances are understudied and poorly regulated in developing countries. Therefore, in order for these countries to contribute meaningfully to the global regulatory initiatives on PFASs, transfer of technology and capacity building must be explicitly considered, given the developed competencies, technical expertise and skills that are required for evidence-based policy development and implementation. Furthermore, the issue of transparency of the production and use of PFASs which some companies consider as confidential business information (CBI) must be closely paid attention to by regulators. Confidential business information if not properly addressed may undermine regulatory and risk reduction measures as it may limit most of the relevant information pertaining to PFASs.

On the Ability of Perfluorohexane Sulfonate (PFHxS) Bioaccumulation by Two Pseudomonas sp. Strains Isolated from PFAS-Contaminated Environmental Matrices

PFASs (perfluoroalkyl and polyfluoroalkyl substances) are highly fluorinated, aliphatic, synthetic compounds with high thermal and chemical stability as well as unique amphiphilic properties which make them ingredients in a range of industrial processes. PFASs have attracted consideration due to their persistence, toxicity and bioaccumulation tendency in the environment. Recently, attention has begun to be addressed to shorter-chain PFASs, such as perfluorohexane sulfonate [PFHxS], apparently less toxic to and more easily eliminated from lab animals. However, short-chain PFASs represent end-products from the transformation of fluorotelomers whose biotic breakdown reactions have not been identified to date. This means that such emergent pollutants will tend to accumulate and persist in ecosystems. Since we are just learning about the interaction between short-chain PFASs and microorganisms, this study reports on the response to PFHxS of two Pseudomonas sp. strains isolated from environmental matrices contaminated by PFASs. The PFHxS bioaccumulation potential of these strains was unveiled by exploiting different physiological conditions as either axenic or mixed cultures under alkanothrofic settings. Moreover, electron microscopy revealed nonorthodox features of the bacterial cells, as a consequence of the stress caused by both organic solvents and PFHxS in the culturing substrate.

Concentration and distribution of per- and polyfluoroalkyl substances (PFAS) in the Asan Lake area of South Korea

Seasonal and spatial variations in per- and polyfluoroalkyl substances (PFAS) concentrations in different environmental media in the Asan Lake area of South Korea were investigated by measuring liquid chromatography-tandem mass spectrometry (LC-MS/MS). The mean concentrations of Σ₁₆ PFAS in the different media were in the ranges of 20.7-98.2 pg/m³ in air, 17.7-467 ng/L in water, 0.04-15.0 ng/g dry weight (dw) in sediments, and not detected (n.d.)-12.9 ng/g dw in soils, and the mean concentrations of Σ₁₉ PFAS in fish ranged from n.d. to 197 ng/g wet weight. The most frequently detected PFAS were perfluorooctanoic acid (PFOA) in air and soils, perfluoropentanoic acid (PFPeA) in water, and perfluorooctane sulfonate (PFOS) in sediment and fish. Long-chain PFAS species dominated over short-chain PFAS in most media samples except for the water phase. Sediment-water partition coefficients (log K_d) and bioaccumulation factors (log BAF) of PFAS were calculated using measured concentrations in water, sediments, and fish. Log K_d of PFAS tended to increase with increasing CF₂ units of PFAS, and perfluorodecanoic acid (PFDA) and PFOS showed the highest log BAF value (> 3.0) in all fish species. These results indicate that longer-chain PFAS, especially PFOS, can be effectively accumulated in biota such as fish.

Defluorination of Perfluorooctanoic Acid (PFOA) and Perfluorooctane Sulfonate (PFOS) by Acidimicrobium sp. Strain A6

Incubations with pure and enrichment cultures of Acidimicrobium sp. strain A6 (A6), an autotroph that oxidizes ammonium to nitrite while reducing ferric iron, were conducted in the presence of PFOA or PFOS at 0.1 mg/L and 100 mg/L. Buildup of fluoride, shorter-chain perfluorinated products, and acetate was observed, as well as a decrease in Fe(III) reduced per ammonium oxidized. Incubations with hydrogen as a sole electron donor also resulted in the defluorination of these PFAS. Removal of up to 60% of PFOA and PFOS was observed during 100 day incubations, while total fluorine (organic plus fluoride) remained constant throughout the incubations. To determine if PFOA/PFOS or some of their degradation products were metabolized, and since no organic carbon source except these PFAS was added, dissolved organic carbon (DOC) was tracked. At concentrations of 100 mg/L, PFOA/PFOS were the main contributors to DOC, which remained constant during the pure A6 culture incubations. Whereas in the A6 enrichment culture, DOC decreased slightly with time, indicating that as defluorination of PFOS/PFOA occurred, some of the products were being metabolized by heterotrophs present in this culture. Results show that A6 can defluorinate PFOA/PFOS while reducing iron, using ammonium or hydrogen as the electron donor.

A Review of Perfluoroalkyl Acids (PFAAs) in terms of Sources, Applications, Human Exposure, Dietary Intake, Toxicity, Legal Regulation, and Methods of Determination

Per- and polyfluoroalkyl substances (PFASs) are widely distributed across the world and are expected to be of concern to human health and the environment. The review focuses on perfluoroalkyl acids (PFAAs) and, in particular, on the most frequently discussed perfluoroalkyl carboxylic acids (PFCAs) and perfluoroalkane sulfonic acids (PFSAs). In this study, some basic information concerning PFASs is reviewed, focusing mainly on PFAAs (perfluoroalkyl acids). We have made efforts to systemize their division into groups according to chemical structure, describe their basic physicochemical properties, characterize production technologies, and determine potential human exposure routes with particular reference to oral exposure. A variety of possible toxicological effects to human health are also discussed. In response to increasing public concern about the toxicity of PFAAs, an evaluation of dietary intake has been undertaken for two of the most commonly known PFAAs: perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS). As summarized in this study, PFAAs levels need further assessment due to the science-based TWI standards laid down by the EFSA’s CONTAM Panel regarding the risk to human health posed by the presence of perfluorooctane sulfonic acid and perfluorooctanoic acid in food (tolerable weekly intakes of PFOA and PFOS set up to 6 ng·kg−1·bw·week−1 and 13 ng·kg−1·bw·week−1, respectively). Current legislation, relevant legislation on PFAAs levels in food, and the most popular methods of analysis in food matrices are described.

Synthesis of Poly(methyl methacrylate-co-butyl acrylate)/Perfluorosilyl Methacrylate Core-Shell Nanoparticles: Novel Approach for Optimization of Coating Process

In this study, the coating order of two monomers in the shell polymerization process of core-shell nanoparticles was altered to facilitate easy coating and optimize the properties of the coated surface to simplify the additional coating formulation process. To obtain a glass transition temperature suitable for coating, a core was synthesized by the copolymerization of an acryl monomer. A perfluoro monomer and silane monomer were additionally added to synthesize nanoparticles exhibiting both water⁻oil repellency and anchoring properties. In order to realize various surface properties, the nanoparticles underwent surface modification and cellulose fiber was introduced. Through the various data described in this text, the surface properties improved with the order of the introduction of the two monomers.

Degradation of PFOA Substitute: GenX (HFPO-DA Ammonium Salt): Oxidation with UV/Persulfate or Reduction with UV/Sulfite?

Hexafluoropropylene oxide dimer acid (HFPO-DA, ammonium salt with trade name: GenX) has been recently detected in river water worldwide. There are significant concerns about its persistence, and potential adverse effects to the biota. In this study, the degradability of GenX by typical advanced redox technologies (UV/persulfate and UV/sulfate) is investigated. Results demonstrate that <5% GenX is oxidized after 3 h in UV/persulfate system, which is much lower than ∼27% for PFOA. In comparison, GenX can be readily degraded and defluorinated by hydrated electron (e_aq^-) generated by UV/sulfite system. Specifically, GenX is not detectable after 2 h, and >90% of fluoride ion is recovered 6 h later. This is attributed to the accumulation and subsequent degradation of CF₃CF₂COOH and CF₃COOH, which are stable intermediates of GenX degradation. Mechanistic investigations suggest that the etheric bond in the molecule is a favorable attack point for the e_aq^-. Such finding is corroborated by quantum chemical calculations. The side CF₃- at the α-carbon probably acts as an effective barrier that prevents GenX from being cleaved by SO₄^-• or OH• at its most sensible point (i.e. the carboxyl group). This study illustrates that reduction by UV/sulfite might be a promising technology to remove GenX from contaminated water.

Discovery of a Novel Polyfluoroalkyl Benzenesulfonic Acid around Oilfields in Northern China

The existence of more than 3000 per- and polyfluoroalkyl substances (PFASs) on the global market has prompted the identification and hazard characterization of hitherto unknown PFASs. In the present study, a novel PFAS, sodium p-perfluorous nonenoxybenzenesulfonate (OBS), was identified using Orbitrap MS/MS in water samples around a suspected application area, Daqing Oilfield, China. The peak OBS concentration was 3.2 × 10³ ng/L in a sample taken near the oil well with the longest production history in Daqing. The concentrations of OBS and contribution to the sum of PFASs in surface waters displayed considerable variation among the three sampling areas (mean levels at 6.9, 50, and 5.6 × 10² ng/L with mean percentages at 9.8%, 45%, and 69% in the background, new and old oilfield areas respectively) confirming that the density of oil wells and the oil production history are important factors influencing OBS contamination in the studied areas. A preliminary assessment of acute toxicity and environmental fate indicates that OBS exhibits similar toxicity and environmental persistence to perfluorooctanesulfonic acid (PFOS). The widespread occurrence of OBS, in conjunction with its potential hazard properties, underscores the need to further study on the bioaccumulation and potential for human exposure.

PFOS induces proliferation, cell-cycle progression, and malignant phenotype in human breast epithelial cells

Perfluorooctanesulfonic acid (PFOS) is a synthetic fluorosurfactant widely used in the industry and a prominent environmental toxicant. PFOS is persistent, bioaccumulative, and toxic to mammalian species. Growing evidence suggests that PFOS has the potential to interfere with estrogen homeostasis, posing a risk of endocrine-disrupting effects. Recently, concerns about a potential link between PFOS and breast cancer have been raised, but the mechanisms underlying its actions as a potential carcinogen are unknown. By utilizing cell proliferation assays, flow cytometry, immunocytochemistry, and cell migration/invasion assays, we examined the potentially tumorigenic activity of PFOS (100 nM–1 mM) in MCF-10A breast cell line. The results showed that the growth of MCF-10A cells exposed to 1 and 10 µM PFOS was higher compared to that of the control. Mechanistic studies using 10 µM PFOS demonstrated that the compound promotes MCF-10A proliferation through accelerating G₀/G_1-to-S phase transition of the cell cycle after 24, 48, and 72 h of treatment. In addition, PFOS exposure increased CDK4 and decreased p27, p21, and p53 levels in the cells. Importantly, treatment with 10 µM PFOS for 72 h also stimulated MCF-10A cell migration and invasion, illustrating its capability to induce neoplastic transformation of human breast epithelial cells. Our experimental results suggest that exposure to low levels of PFOS might be a potential risk factor in human breast cancer initiation and development.

Toward a Comprehensive Global Emission Inventory of C4-C10 Perfluoroalkanesulfonic Acids (PFSAs) and Related Precursors: Focus on the Life Cycle of C8-Based Products and Ongoing Industrial Transition

Here a new global emission inventory of C₄-C₁₀ perfluoroalkanesulfonic acids (PFSAs) from the life cycle of perfluorooctanesulfonyl fluoride (POSF)-based products in 1958-2030 is presented. In particular, we substantially improve and expand the previous frameworks by incorporating missing pieces (e.g., emissions to soil through land treatment, overlooked precursors) and updating parameters (e.g., emission factors, degradation half-lives). In 1958-2015, total direct and indirect emissions of perfluorooctanesulfonic acid (PFOS) are estimated as 1228-4930 tonnes, and emissions of PFOS precursors are estimated as 1230-8738 tonnes and approximately 670 tonnes for x-perfluorooctanesulfonamides/sulfonamido ethanols (xFOSA/Es) and POSF, respectively. Most of these emissions occurred between 1958 and 2002, followed by a substantial decrease. This confirms the positive effect of the ongoing transition to phase out POSF-based products, although this transition may still require substantial time and cause substantial additional releases of PFOS (8-153 tonnes) and xFOSA/Es (4-698 tonnes) in 2016 to 2030. The modeled environmental concentrations obtained by coupling the emission inventory and a global multimedia mass-balance model generally agree well with reported field measurements, suggesting that the inventory captures the actual emissions of PFOS and xFOSA/Es for the time being despite remaining uncertainties. Our analysis of the key uncertainties and open questions of and beyond the inventory shows that, among others, degradation of side-chain fluorinated polymers in the environment and landfills can be a long-term, (potentially) substantial source of PFOS.

Effects of chronic perfluorooctanoic acid (PFOA) at low concentration on morphometrics, gene expression, and fecundity in zebrafish (Danio rerio)

Perfluorooctanoic acid (PFOA) is a persistent, toxic, anthropogenic chemical recalcitrant to biodegradation. Based on previous studies in lower and higher vertebrates, it was hypothesized that chronic, sub-lethal, embryonic exposure to PFOA in zebrafish (Danio rerio) would adversely impact fish development, survival, and fecundity. Zebrafish embryo/sac-fry were water exposed to 2.0 or 0nM PFOA from 3 to 120hpf, and juvenile to adult cohorts were fed spiked food (8 pM) until 6 months. After chronic exposure, PFOA exposed fish were significantly smaller in total weight and length. Gene expression analysis found a significant decrease of transporters slco2b1, slco4a1, slco3a1 and tgfb1a, and a significant increase of slco1d1 expression. PFOA exposed fish produced significantly fewer eggs with reduced viability and developmental stage delay in F₁. Chronic, low-dose exposure of zebrafish to PFOA significantly altered normal development, survival and fecundity and would likely impact wild fish population fitness in watersheds chronically exposed to PFOA.

Sampling and simultaneous determination of volatile per- and polyfluoroalkyl substances in wastewater treatment plant air and water

Volatile per- and polyfluoroalkyl substances (PFASs) are often used as precursors in the synthesis of nonvolatile PFASs. The volatile PFASs, which include the perfluoroalkyl iodides (PFAIs), fluorotelomer iodides (FTIs), fluorotelomer alcohols (FTOHs), fluorotelomer olefins (FTOs), fluorotelomer acrylates (FTACs), and fluorotelomer methacrylates (FTMACs), are often produced starting from the telomerization process. These volatile compounds can be present in the air and water environment and can be transformed into highly persistent perfluoroalkyl carboxylic acids. With the exception of FTOHs, which are well studied, the determination of other volatile PFASs is also of prime importance in studying the sources and fate of PFASs. In this study, a method was developed to determine representative precursor compounds that included PFAIs, FTIs, FTOs, FTACs, and FTMACs in wastewater treatment plant (WWTP) air and water samples. The sampling and sample preparation step involved the use of solid-phase extraction (SPE) cartridges with HLB™ material to enrich the analyte. Gas chromatography with mass spectrometry was employed for the detection and quantification of the analytes. Method validation results showed high linearity and sensitivity in the positive electron ionization-selected ion monitoring mode (+EI-SIM). The absolute instrumental limits of detection were in the range of 0.5 to 2 pg. The method detection limit (MDL) in air was 1 ng/m³ with the exception of the FTACs which could be only be detected at concentrations higher than 40 ng/m³. The MDL in water was 10 ng/L. Direct spiking of the cartridges and analyte introduction by volatilization from the glass surface onto the SPE material had recoveries between 86 and 100%. The volatile PFASs were shown to readily partition into the air rather than into water. Consequently, large losses in the amount of PFASs were observed when these were spiked into the water.

Graphical abstract

Draft Genome Sequence of Perfluorooctane Acid-Degrading Bacterium Pseudomonas parafulva YAB-1

Pseudomonas parafulva YAB-1, isolated from perfluorinated compound-contaminated soil, has the ability to degrade perfluorooctane acid (PFOA) compound. Here, we report the draft genome sequence and annotation of the PFOA-degrading bacterium P. parafulva YAB-1. The data provide the basis to investigate the molecular mechanism of PFOA metabolism.

Selected physicochemical aspects of poly- and perfluoroalkylated substances relevant to performance, environment and sustainability-part one

The elemental characteristics of the fluorine atom tell us that replacing an alkyl chain by a perfluoroalkyl or polyfluorinated chain in a molecule or polymer is consequential. A brief reminder about perfluoroalkyl chains, fluorocarbons and fluorosurfactants is provided. The outstanding, otherwise unattainable physicochemical properties and combinations thereof of poly and perfluoroalkyl substances (PFASs) are outlined, including extreme hydrophobic and lipophobic character; thermal and chemical stability in extreme conditions; remarkable aptitude to self-assemble into sturdy thin repellent protecting films; unique spreading, dispersing, emulsifying, anti-adhesive and levelling, dielectric, piezoelectric and optical properties, leading to numerous industrial and technical uses and consumer products. It was eventually discovered, however, that PFASs with seven or more carbon-long perfluoroalkyl chains had disseminated in air, water, soil and biota worldwide, are persistent in the environment and bioaccumulative in animals and humans, raising serious health and environmental concerns. Further use of long-chain PFASs is environmentally not sustainable. Most leading manufacturers have turned to shorter four to six carbon perfluoroalkyl chain products that are not considered bioaccumulative. However, many of the key performances of PFASs decrease sharply when fluorinated chains become shorter. Fluorosurfactants become less effective and less efficient, provide lesser barrier film stability, etc. On the other hand, they remain as persistent in the environment as their longer chain homologues. Surprisingly little data (with considerable discrepancies) is accessible on the physicochemical properties of the PFASs under examination, a situation that requires consideration and rectification. Such data are needed for understanding the environmental and in vivo behaviour of PFASs. They should help determine which, for which uses, and to what extent, PFASs are environmentally sustainable.

Acute and chronic toxicity of short chained perfluoroalkyl substances to Daphnia magna

The aim of this study was to evaluate the aquatic toxicity of a C4-C6 chemistry based fluoroalkylated polymer and the perfluoroalkyl carboxylic acids, PFBA, PFHxA and PFOA to Daphnia magna. The acute toxicity decreased with decreasing carbon chain length, but the polymer did not show a dose related effect. In a chronic toxicity test performed with PFHxA, mortality was observed at similar concentrations as in the acute toxicity test, indicating that toxicity did not increase with increasing exposure time. Effects on mortality, reproduction and population growth rate occurred at similar concentrations, indicating no specific effect of PFHxA on sublethal endpoints. C4-C6 chemistry is thus less hazardous to daphnids than C7-C8 chemistry. Yet, these compounds are persistent, hard to remove from the environment and production volumes are increasing.

Processing follows function: pushing the formation of self-assembled monolayers to high-throughput compatible time scales

Self-assembled monolayers (SAMs) of organic molecules can be used to tune interface energetics and thereby improve charge carrier injection at metal-semiconductor contacts. We investigate the compatibility of SAM formation with high-throughput processing techniques. Therefore, we examine the quality of SAMs, in terms of work function shift and chemical composition as measured with photoelectron and infrared spectroscopy and in dependency on molecular exposure during SAM formation. The functionality of the SAMs is determined by the performance increase of organic field-effect transistors upon SAM treatment of the source/drain contacts. This combined analytical and device-based approach enables us to minimize the necessary formation times via an optimization of the deposition conditions. Our findings demonstrate that SAMs composed of partially fluorinated alkanethiols can be prepared in ambient atmosphere from ethanol solution using immersion times as short as 5 s and still exhibit almost full charge injection functionality if process parameters are chosen carefully. This renders solution-processed SAMs compatible with high-throughput solution-based deposition techniques.

Chronic effects of PFOA and PFOS on sexual reproduction of freshwater rotifer Brachionus calyciflorus

Rotifers play an important role in the dynamics of freshwater and coastal marine ecosystems, and are also important tools for assessing toxicity in aquatic environments. In this study, the effects of perfluorooctane sulfonate (PFOS) and perfluorooctanoic acid (PFOA) on the population growth rate and resting egg production of rotifer Brachionus calyciflorus were investigated. Reproductive bioassays indicated that PFOS increased the rotifer population growth rate at the concentration ⩽2.0 mg L(-1), and inhibited it at higher concentrations. For PFOA, the inhibition of population growth rate was observed when the concentration was greater than 4.0 mg L(-1). Exposure to PFOS (0.25 mg L(-1)) or PFOA (2.0 mg L(-1)) increased the mictic ratios of unexposed rotifer offspring. Population variation and increased mictic ratios were likely the two major factors leading to decline of resting egg production. The resting eggs formed under exposure to PFOA/PFOS in the range of 0.125-2.0 mg L(-1) showed higher hatching percentages in the control medium than that without PFOA/PFOS exposure. When the resting eggs were formed in the control medium and incubated in media with different levels of PFOA/PFOS, higher hatching percentages were induced by PFOS but lower hatching percentages induced by PFOA. The effects on the hatching rate of resting eggs with PFOA/PFOS exposure during the hatching period were greater than those with exposure during resting egg formation period, and the effect of PFOS was greater than that of PFOA. Both PFOA and PFOS exhibited slight effect on the hatching pattern.

Perfluorinated compounds affect the function of sex hormone receptors

Perfluorinated compounds (PFCs) are a large group of chemicals used in different industrial and commercial applications. Studies have suggested the potential of some PFCs to disrupt endocrine homeostasis, increasing the risk of adverse health effects. This study aimed to elucidate mechanisms behind PFC interference with steroid hormone receptor functions. Seven PFCs [perfluorohexane sulfonate (PFHxS), perfluorooctane sulfonate (PFOS), perfluorooctanoate (PFOA), perfluorononanoate (PFNA), perfluorodecanoate (PFDA), perfluoroundecanoate (PFUnA), and perfluorododecanoate (PFDoA)] were analyzed in vitro for their potential to affect estrogen receptor (ER) and androgen receptor (AR) transactivity as well as aromatase enzyme activity. The PFCs were assessed as single compounds and in an equimolar mixture. PFHxS, PFOS and PFOA significantly induced the ER transactivity, whereas PFHxS, PFOS, PFOA, PFNA and PFDA significantly antagonized the AR activity in a concentration-dependent manner. Moreover, PFDA weakly decreased the aromatase activity at a high test concentration. A mixture effect more than additive was observed on AR function. We conclude that five of the seven PFCs possess the potential in vitro to interfere with the function of the ER and/or the AR. The observed mixture effect emphasizes the importance of considering the combined action of PFCs in future studies to assess related health risks.

Fast determination of perfluorocompounds in packaging by focused ultrasound solid-liquid extraction and liquid chromatography coupled to quadrupole-time of flight mass spectrometry

A focused ultrasound solid-liquid extraction (FUSLE) and liquid chromatography (HPLC) coupled to quadrupole-time of flight mass spectrometry (QTOF-MS/MS) based method is proposed to determine six perfluorocarboxylic acids (PFCA) and perfluorooctane sulfonate (PFOS) in food-contact packaging. FUSLE, a simple, inexpensive and fast extraction technique, has been carried out with just 8mL of ethanol in one cycle of only 10s. The whole method presented good repeatability and intermediate precision, with RSDs below 11% and 15%, respectively; limits of detection, with values between 0.5ng/g and 2.2ng/g, and successful recovery values, around 100% in all cases. The developed method has been validated and applied to the analysis of real food-contact packaging samples. FUSLE results have been compared to those obtained with pressurized liquid extraction (PLE) and no significant differences between them have been found. PFAA were detected in all the packaging samples analyzed, in a concentration range between 4ng/g and 29ng/g, being PFHpA (perfluoroheptanoic acid) the most abundant of them.

Alterations in differentially expressed genes after repeated exposure to perfluorooctanoate and perfluorooctanesulfonate in liver of Oryzias latipes

Perfluorooctanoate (PFOA) and perfluorooctanesulfonate (PFOS) are considered biologically toxic due to their persistence in the environment. The effects of repeated exposure to these compounds on differentially expressed genes (DEGs) were investigated in liver of the medaka, Oryzias latipes. In this study, seven genes-except for cytochrome P450 3A (CYP450 3A)-were identified as DEGs that were downregulated in response to 15- and 30 days exposures to PFOA and/or PFOS. Four DEGs (c-type lysozyme, EF-1β, complement component C3-1, and NADH dehydrogenase subunit 1) returned to basal levels after 15 days of recovery after 30 days of exposure to the compounds. In contrast, three DEGs (transferrin, alcohol dehydrogenase class VI, and CYP450 3A) were still upregulated by PFOS after 15 days of recovery. In addition, the effect of PFOS showed more accumulation after 15 days of recovery than PFOA. These data suggest that PFOS accumulates more in tissue than PFOA and causes high cellular toxicity by way of suppression of the genes encoding transferrin and alcohol dehydrogenase class VI, whereas there is upregulation of cytochrome P450 3A.

Occurrence and fate of perfluorinated compounds in sewage sludge from Spain and Germany

Perfluorinated compounds (PFCs) are persistent and bioaccumulative organic compounds used as additives in many industrial products. After use, these compounds enter wastewater treatment plants (WWTP) and long-chain PFCs are primarily accumulated in sludge. The aim of this study was to determine the occurrence and behavior of five PFCs in sludge from 15 WWTP from Spain and Germany that receive both urban and industrial wastes. The PFCs studied were perfluorooctanesulfonate (PFOS), perfluorohexanesulfonate (PFHxS), perfluorobutanesulfonate (PFBS), perfluorooctanoic acid (PFOA), and perfluorononanoic acid (PFNA). One gram of freeze-dried, sieved, and homogenized sludge was extracted using an ultrasonic bath with methanol and glacial acetic acid. After that, the extract was recovered and evaporated to dryness with a TurboVap and then 1 mL of acetonitrile was added and the extract was cleaned up with black carbon. Liquid chromatography coupled to mass spectrometry operated in selected reaction monitoring was used to determine target compounds. Quality parameters are provided for the set of compounds studied. PFCs were detected in all samples. In Spanish sludge, ∑PFC ranged from 0.28 to 5.20 ng/g dry weight (dw) with prevalence of PFOS, while in German sludge, ∑PFC ranged from 20.7 to 38.6 ng/g dw and PFBS was the dominant compound. As a next step, the evolution of PFC concentrations within the sludge treatment steps (primary sludge, anaerobic digested sludge, and centrifuged sludge) was evaluated and differences among levels and patterns were observed and were attributed to the influent water quality and treatment used. Finally, we estimated the amount of PFCs discharged via sludge in order to determine the potential impact to the environment according to different sludge usage practices in the two regions investigated. This manuscript provided an intra-European overview of PFC distribution in sludge. Levels and compound distribution depend on the WWTP sampled. This study demonstrates that PFCs are persistent to sludge treatment and the loads in sludge may pose a future environmental risk, if not controlled.

6:2 fluorotelomer sulfonate aerobic biotransformation in activated sludge of waste water treatment plants

The aerobic biotransformation of 6:2 FTS salt [F(CF2)6CH2CH2SO3- K+] was determined in closed bottles for 90d in diluted activated sludge from three waste water treatment plants (WWTPs) to compare its biotransformation potential with that of 6:2 FTOH [F(CF2)6CH2CH2OH]. The 6:2 FTS biotransformation was relatively slow, with 63.7% remaining at day 90 and all observed transformation products together accounting for 6.3% of the initial 6:2 FTS applied. The overall mass balance (6:2 FTS plus observed transformation products) at day 90 in live and sterile treatments averaged 70% and 94%, respectively. At day 90, the stable transformation products observed were 5:3 acid [F(CF2)5CH2CH2COOH, 0.12%], PFBA [F(CF2)3COOH, 0.14%], PFPeA [F(CF2)4COOH, 1.5%], and PFHxA [F(CF2)5COOH 1.1%]. In addition, 5:2 ketone [F(CF2)5C(O)CH3] and 5:2 sFTOH [F(CF2)5CH(OH)CH3] together accounted for 3.4% at day 90. The yield of all the stable transformation products noted above (2.9%) was 19 times lower than that of 6:2 FTOH in aerobic soil. Thus 6:2 FTS is not likely to be a major source of PFCAs and polyfluorinated acids in WWTPs. 6:2 FTOH, 6:2 FTA [F(CF2)6CH2COOH], and PFHpA [F(CF2)6COOH] were not observed during the 90-d incubation. 6:2 FTS primary biotransformation bypassed 6:2 FTOH to form 6:2 FTUA [F(CF2)5CF=CHCOOH], which was subsequently degraded via pathways similar to 6:2 FTOH biotransformation. A substantial fraction of initially dosed 6:2 FTS (24%) may be irreversibly bound to diluted activated sludge catalyzed by microbial enzymes. The relatively slow 6:2 FTS degradation in activated sludge may be due to microbial aerobic de-sulfonation of 6:2 FTS, required for 6:2 FTS further biotransformation, being a rate-limiting step in microorganisms of activated sludge in WWTPs.

Perfluorooctane sulfonate (PFOS) induces reactive oxygen species (ROS) production in human microvascular endothelial cells: role in endothelial permeability

Perfluorooctane sulfonate (PFOS) is a member of the perfluoroalkyl acids (PFAA) containing an eight-carbon backbone. PFOS is a man-made chemical with carbon-fluorine bonds that are among the strongest in organic chemistry, and PFOS is widely used in industry. Human occupational and environmental exposure to PFOS occurs globally. PFOS is non-biodegradable and is persistent in the human body and environment. In this study, data demonstrated that exposure of human microvascular endothelial cells (HMVEC) to PFOS induced the production of reactive oxygen species (ROS) at both high and low concentrations. Morphologically, it was found that exposure to PFOS induced actin filament remodeling and endothelial permeability changes in HMVEC. Furthermore, data demonstrated that the production of ROS plays a regulatory role in PFOS-induced actin filament remodeling and the increase in endothelial permeability. Our results indicate that the generation of ROS may play a role in PFOS-induced aberrations of the endothelial permeability barrier. The results generated from this study may provide a new insight into the potential adverse effects of PFOS exposure on humans at the cellular level.

A review on progress in QSPR studies for surfactants

This paper presents a review on recent progress in quantitative structure-property relationship (QSPR) studies of surfactants and applications of various molecular descriptors. QSPR studies on critical micelle concentration (cmc) and surface tension (γ) of surfactants are introduced. Studies on charge distribution in ionic surfactants by quantum chemical calculations and its effects on the structures and properties of the colloids of surfactants are also reviewed. The trends of QSPR studies on cloud point (for nonionic surfactants), biodegradation potential and some other properties of surfactants are evaluated.

Biodegradation of fluorinated alkyl substances

The incorporation of fluorine into organic molecules entails both positive and adverse effects. Although fluorine imparts positive and unique properties such as water-and oil-repellency and chemical stability, adverse effects often pervade members of this compound class. A striking property of long perfluoroalkyl chains is their very pronounced environmental persistence. The present review is the first one designed to summarize recent accomplishments in the field of biodegradation of fluorine-containing surfactants, their metabolites, and structural analogs. The pronounced scientific and public interest in these chemicals has given impetus to undertake numerous degradation studies to assess the sources and origins of different fluorinated analog chemical known to exist in the environment. It was shown that biodegradation plays an important role in understanding how fluorinated substances reach the environment and, once they do, what their fate is. Today, PFOS and PFOA are ubiquitously detected as environmental contaminants. Their prominence as contaminants is mainly due to their extreme persistence, which is linked to their perfluoroalkyl chain length. It appears that desulfonation of a highly fluorinated surfactants can be achieved if an α-situated H atom, in relation to the sulfonate group, is present, at least under sulfur-limiting conditions. Molecules that are less heavily fluorinated can show very complex metabolic behavior, as is the case for fluorotelomer alcohols. These compounds are degraded via different but simultaneous pathways, which produce different stable metabolites, one of which is the respective perfluoroalkanoate (8:2-FTOH is transformed to PFOA). Preliminary screening tests indicate that fluorinated functional groups, such as the trifluoromethoxy group and the p-(trifluoromethyl)phenoxy group, may be useful implementations in novel, environmentally benign fluorosurfactants. More specifically, trifluoromethoxy groups constitute a substitute for those that have been used in the past; this functionality is degradable when it appears in structures that are normally subject to biodegradation. Other compounds tested did not meet this criterion. Interdisciplinary investigations on fluorinated surfactants are still very much needed and will certainly continue during the next many years. For instance, the role of fluorinated polymers in contributing small fluorinated molecules to the environmental burden still has not been fully understood.

Perfluoroalkyl sulfonic and carboxylic acids: a critical review of physicochemical properties, levels and patterns in waters and wastewaters, and treatment methods

Perfluorinated acids (PFAs) are an emerging class of environmental contaminants present in various environmental and biological matrices. Two major PFA subclasses are the perfluorinated sulfonic acids (PFSAs) and carboxylic acids (PFCAs). The physicochemical properties and partitioning behavior for the linear PFA members are poorly understood and widely debated. Even less is known about the numerous branched congeners with varying perfluoroalkyl chain lengths, leading to confounding issues around attempts to constrain the properties of PFAs. Current computational methods are not adequate for reliable multimedia modeling efforts and risk assessments. These compounds are widely present in surface, ground, marine, and drinking waters at concentrations that vary from pg L(-1) to microg L(-1). Concentration gradients of up to several orders of magnitude are observed in all types of aquatic systems and reflect proximity to known industrial sources concentrated near populated regions. Some wastewaters contain PFAs at mg L(-1) to low g L(-1) levels, or up to 10 orders of magnitude higher than present in more pristine receiving waters. With the exception of trifluoroacetic acid, which is thought to have both significant natural and anthropogenic sources, all PFSAs and PFCAs are believed to arise from human activities. Filtration and sorption technologies offer the most promising existing removal methods for PFAs in aqueous waste streams, although sonochemical approaches hold promise. Additional studies need to be conducted to better define opportunities from evaporative, extractive, thermal, advanced oxidative, direct and catalyzed photochemical, reductive, and biodegradation methods. Most PFA treatment methods exhibit slow kinetic profiles, hindering their direct application in conventional low hydraulic residence time systems.