High levels of multiple metal resistance and its correlation to antibiotic resistance in environmental isolates of Acinetobacter

Heavy metal resistance of marine bacteria on the sediments of the Black Sea

The Black Sea is unfortunately globally established as a highly polluted sea, with contaminants from various sources polluting its marine sediments. This study aimed at analyzing heavy metal resistance levels by heterotrophic bacteria colonizing marine sediments across Black Sea shores within Turkey. Twenty-nine bacterial samples from marine sediments were investigated through exposure to sixteen heavy metal salts using the microdilution method. The minimum inhibitory concentration values for bacterial colonies within such marine sediment samples ranged from <0.97 mM/L to >1000 mM/L. Trough and peak minimum inhibitory concentration values were determined at <0.17 mg/mL and > 331 mg/mL. Peak tolerated and peak toxic heavy metals were identified as iron and cadmium, respectively. Resistance ratios were also obtained in this study. Bacillus wiedmannii was identified as the most resistant bacterial population when exposed to heavy metal salts. This study shows occurrence of heavy metal resistant bacteria within Black Sea sediments.

Isolation and characterization of chromium (VI) tolerant bacteria from tannery effluents

BACKGROUND

The tannery industry is a potent environment polluting agent worldwide. Chromium (VI) is a major heavy metal in tannery effluents and their accumulation in soil and water is a serious environmental problem. This study investigates the capacity of indigenous bacteria isolated from tannery effluents for tolerance to chromium (VI).

METHODS

The chromium tolerance of isolates assessed through both agar dilution and broth microdilution methods. Isolates were identified by morphological and biochemical analysis. The tolerance of isolates to cadmium, nickel, lead, and vanadium and also their multidrug-resistant (MDR) profile were determined. Then the top isolate was characterized via 16S rRNA sequencing and its growth temperature and pH were optimized. Finally, the kinetic of chromium biosorption and chromium removal efficiency was determined using a Nutrient broth medium and wastewater containing 20 mg/L chromium, respectively.

RESULTS

Of 32 screened chromium tolerant isolates, 14 isolates with higher chromium tolerance were selected for further study. 78.57% of isolates represented simultaneous MDR and Multi Heavy Metal tolerance (MHMT) phenotypes and MDR indices of 0.2-1 indicating their source from niches with high antibiotic contamination. However, there was no significant correlation between MDR and MHMT phenotypes among isolates. The top isolate was identified as Lactococcus lactis and showed optimal growth at pH 6 and 25 °C. The maximum chromium biosorption occurred at the end of the exponential phase upon optimized conditions and the approximate chromium removal efficiency of 52.5% was obtained.

CONCLUSION

The isolated bacteria specifically L. lactis after more evaluations, may show the potential for bioremediation of chromium from tannery effluents.

Co-selective Pressure of Cadmium and Doxycycline on the Antibiotic and Heavy Metal Resistance Genes in Ditch Wetlands

Abuse of heavy metals and antibiotics results in the dissemination of metal resistance genes (MRGs) and antibiotic resistance genes (ARGs). Ditch wetlands are important sinks for heavy metals and antibiotics. The relationships between bacterial communities and MRG/ARG dissemination under dual stresses of heavy metals and antibiotics remain unclear. The responses of MRGs and ARGs to the co-selective pressure of cadmium (Cd) and doxycycline (DC) in ditch wetlands were investigated after 7-day and 84-day exposures. In ecological ditches, residual rates of Cd and DC varied from 0.4 to –5.73% and 0 to –0.61%, respectively. The greatest total relative abundance of ARGs was observed in the Cd 5 mg L^–1 + DC 50 mg L^–1 group. A significant level of DC (50 mg L^–1) significantly reduced the total relative abundances of MRGs at a concentration of 5 mg L^–1 Cd stress. Redundancy analysis indicated that Cd and DC had strong positive effects on most ARGs and MRGs after a 7-day exposure. Meanwhile, the class 1 integron gene (intI1) exhibited strong positive correlations with most ARGs and cadmium resistance genes (czcA) after an 84-day exposure. Network analysis showed that Acinetobacter and Pseudomonas were the potential dominant host genera for ARGs and MRGs, and tetracycline resistance genes (tetA), czcA, and intI1 shared the same potential host bacteria Trichococcus after an 84-day exposure.

Heavy metals multi-tolerant Bradyrhizobium isolated from mercury mining region in Algeria

Heavy metals accumulation in the environment has led to a decrease in the capacity of ecosystems to sustain life as human, animal and plant health is threatened. To remedy this problem, rhizoremediation has been suggested as a solution. Legumes and rhizobia symbiotic association has captivated attention due to its involvement in the restoration of heavy-metal-contaminated sites. Thus, the aim of this study was to isolate and characterize the strains nodulating Calicotome spinosa plant that naturally occurred in two Algerian mercury mines. Fifty-four bacterial strains were isolated, then grouped into sixteen distinct BOX-PCR patterns and were genetically identified as belonging to the Bradyrhizobium genus. The studied strains were able to induce nodules on Retama monosperma, R. reatam, Lupinus albus, while no nodulation was observed in Glycine max, their symbiotic capacity was confirmed by amplifying the nodC gene. The phylogenetic analysis based on the nodC has grouped this Bradyrhizobium strains to either symbiovar genistearum or retamae. The isolates revealed diversity in terms of NaCl; pH tolerance, and phosphate solubilization. Production of siderophores was negative for these strains. All the isolated Bradyrhizobium were tolerant to both Zn and Pb in contrast they were sensitive to Cu and Cd. Interestingly, 43% of strains were tolerant to high Hg levels. Hence, some strains displayed multiple tolerances to heavy metals. Therefore, this is the first time we identify Bradyrhizobium strains originating from a North African mercury mine. This study could help to select mercury and other heavy metal-tolerant rhizobia showing an interesting potential to be used as inoculants to remediate the heavy metal soil accumulation.

Plasmids encode niche-specific traits in Lactobacillaceae

Species belonging to the family Lactobacillaceae are found in highly diverse environments and play an important role in fermented foods and probiotic products. Many of these species have been individually reported to harbour plasmids that encode important genes. In this study, we performed comparative genomic analysis of publicly available data for 512 plasmids from 282 strains represented by 51 species of this family and correlated the genomic features of plasmids with the ecological niches in which these species are found. Two-thirds of the species had at least one plasmid-harbouring strain. Plasmid abundance and GC content were significantly lower in vertebrate-adapted species as compared to nomadic and free-living species. Hierarchical clustering highlighted the distinct nature of plasmids from the nomadic and free-living species than those from the vertebrate-adapted species. EggNOG-assisted functional annotation revealed that genes associated with transposition, conjugation, DNA repair and recombination, exopolysaccharide production, metal ion transport, toxin–antitoxin system, and stress tolerance were significantly enriched on the plasmids of the nomadic and in some cases nomadic and free-living species. On the other hand, genes related to anaerobic metabolism, ABC transporters and the major facilitator superfamily were overrepresented on the plasmids of the vertebrate-adapted species. These genomic signatures correlate with the comparatively nutrient-depleted, stressful and dynamic environments of nomadic and free-living species and nutrient-rich and anaerobic environments of vertebrate-adapted species. Thus, these results indicate the contribution of the plasmids in the adaptation of lactobacilli to their respective habitats. This study also underlines the potential application of these plasmids in improving the technological and probiotic properties of lactic acid bacteria.

Endophytic bacteria stimulate mercury phytoremediation by modulating its bioaccumulation and volatilization

The quantification, efficiency, and possible mechanisms of mercury phytoremediation by endophytic bacteria are poorly understood. Here we selected 8 out of 34 previously isolated endophytic bacterial strains with a broad resistance profile to metals and 11 antibiotics: Acinetobacter baumannii BacI43, Bacillus sp. BacI34, Enterobacter sp. BacI14, Klebsiella pneumoniae BacI20, Pantoea sp. BacI23, Pseudomonas sp. BacI7, Pseudomonas sp. BacI38, and Serratia marcescens BacI56. Except for Klebsiella pneumoniae BacI20, the other seven bacterial strains promoted maize growth on a mercury-contaminated substrate. Acinetobacter baumannii BacI43 and Bacillus sp. BacI34 increased total dry biomass by approximately 47%. The bacteria assisted mercury remediation by decreasing the metal amount in the substrate, possibly by promoting its volatilization. The plants inoculated with Serratia marcescens BacI56 and Pseudomonas sp. BacI38 increased mercury volatilization to 47.16% and 62.42%, respectively. Except for Bacillus sp. BacI34 and Pantoea sp. BacI23, the other six bacterial strains favored mercury bioaccumulation in plant tissues. Endophytic bacteria-assisted phytoremediation contributed to reduce the substrate toxicity assessed in different model organisms. The endophytic bacterial strains selected herein are potential candidates for assisted phytoremediation that shall help reduce environmental toxicity of mercury-contaminated soils.

Green Synthesis of AuNPs by Acinetobacter sp. GWRVA25: Optimization, Characterization, and Its Antioxidant Activity

Bacteriogenic synthesis of metal nanoparticles is ecofriendly and greatly influenced by physico-chemical reaction parameters with respect to shape and size. Thus, present work aimed to synthesize and optimization of bacteriogenic gold nanoparticles (AuNPs) and study their antioxidant activity. Acinetobacter sp. cells were able to synthesize AuNPs, when challenged with tetra-chloroauric acid (HAuCl₄). By physicochemical optimization, maximum synthesis was obtained with 72 h old culture using 2.1 × 10⁹ CFU/ml cell density. Whereas, pH-7 is suitable for AuNPs synthesis. HAuCl₄ concentration (0.5 mM) enhanced the formation of monodispersed and spherical nanoparticles (15 ± 10 nm). At 37°C temperature, Acinetobacter sp. released nanoparticles in supernatant. From characterization, AuNPs were found to be crystalline in nature with negative surface charge. AuNPs showed up to 86% different radical scavenging ability, exhibiting antioxidant activity. In conclusion, spherical AuNPs can be synthesized using Acinetobacter sp. through physicochemical optimization. This is the first report of antioxidant activity exhibited by monodispersed bacteriogenic AuNPs synthesized using Acinetobacter sp.

Heavy Metal Toxicity in Armed Conflicts Potentiates AMR in A. baumannii by Selecting for Antibiotic and Heavy Metal Co-resistance Mechanisms

Acinetobacter baumannii has become increasingly resistant to leading antimicrobial agents since the 1970s. Increased resistance appears linked to armed conflicts, notably since widespread media stories amplified clinical reports in the wake of the American invasion of Iraq in 2003. Antimicrobial resistance is usually assumed to arise through selection pressure exerted by antimicrobial treatment, particularly where treatment is inadequate, as in the case of low dosing, substandard antimicrobial agents, or shortened treatment course. Recently attention has focused on an emerging pathogen, multi-drug resistant A. baumannii (MDRAb). MDRAb gained media attention after being identified in American soldiers returning from Iraq and treated in US military facilities, where it was termed "Iraqibacter." However, MDRAb is strongly associated in the literature with war injuries that are heavily contaminated by both environmental debris and shrapnel from weapons. Both may harbor substantial amounts of toxic heavy metals. Interestingly, heavy metals are known to also select for antimicrobial resistance. In this review we highlight the potential causes of antimicrobial resistance by heavy metals, with a focus on its emergence in A. baumanni in war zones.

First isolation of carbapenem-resistant Acinetobacter beijerinckii from an environmental sample

The emergence of opportunistic Acinetobacter spp. in healthcare settings poses a significant threat to public health. The major reasons for nosocomial spread of these species are their abilities to develop and transfer drug resistance against various classes of antibiotics. Considering that Acinetobacter spp. are ubiquitous in nature, can utilize several carbon sources, and reach humans via various pathways, our aim was to obtain information about the environmental strains of this genus. Our first step was to develop and test a multistep isolation procedure based on traditional scientific methods. Antibiotic resistance patterns of the isolated strains were determined, as susceptibility to 12 antibiotics of 7 classes was tested by MIC Test Strip method. Altogether 366 samples (groundwater, surface water, and soil) of 24 sites were investigated and a collection of 37 Acinetobacter isolates was obtained. Among others, clinically important human pathogen Acinetobacter spp., such as A. baumannii, A. johnsonii, and A. gyllenbergii were identified. Three environmental strains were determined as multidrug-resistant including a carbapenem-resistant, hemolytic Acinetobacter beijerinckii strain isolated from a hydrocarbon-contaminated groundwater sample. In summary, it has been found that the applied multistep isolation procedure is applicable to isolate various species of Acinetobacter genus. Based on the antibiotic resistance assay, we can conclude that environmental representatives of Acinetobacter spp. are able to develop multidrug resistance, but at a lower rate than their clinical counterparts.

Antimicrobial resistance due to the content of potentially toxic metals in soil and fertilizing products

Potentially toxic metals (PTM), along with PTM-resistant bacteria and PTM-resistance genes, may be introduced into soil and water through sewage systems, direct excretion, land application of biosolids (organic matter recycled from sewage, especially for use in agriculture) or animal manures as fertilizers, and irrigation with wastewater or treated effluents. In this review article, we have evaluated whether the content of arsenic (As), cadmium (Cd), chromium (CrIII + CrVI), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni), and zinc (Zn) in soil and fertilizing products play a role in the development, spreading, and persistence of bacterial resistance to these elements, as well as cross- or co-resistance to antimicrobial agents. Several of the articles included in this review reported the development of resistance against PTM in both sewage and manure. Although PTM like As, Hg, Co, Cd, Pb, and Ni may be present in the fertilizing products, the concentration may be low since they occur due to pollution. In contrast, trace metals like Cu and Zn are actively added to animal feed in many countries. In several studies, several different bacterial species were shown to have a reduced susceptibility towards several PTM, simultaneously. However, neither the source of resistant bacteria nor the minimum co-selective concentration (MCC) for resistance induction are known. Co- or cross-resistance against highly important antimicrobials and critically important antimicrobials were identified in some of the bacterial isolates. This suggest that there is a genetic linkage or direct genetic causality between genetic determinants to these widely divergent antimicrobials, and metal resistance. Data regarding the routes and frequencies of transmission of AMR from bacteria of environmental origin to bacteria of animal and human origin were sparse. Due to the lack of such data, it is difficult to estimate the probability of development, transmission, and persistence of PTM resistance. Abbreviations: PTM: potentially toxic metals; AMR: antimicrobial resistance; ARG: antimicrobial resistance gene; MCC: minimum co-selective concentration; MDR: multidrug resistance; ARB: antimicrobial resistant bacteria; HGT: horizontal gene transfer; MIC: minimum inhibitory concentration.

Purification and Characterization of an Active Principle, Lawsone, Responsible for the Plasmid Curing Activity of Plumbago zeylanica Root Extracts

Plasmid curing is the process of obviating the plasmid encoded functions such as antibiotic resistance, virulence, degradation of aromatic compounds, etc. in bacteria. Several plasmid curing agents have been reported in literature, however, no plasmid curing agent can eliminate all plasmids from different hosts. Hence, there is always a need for novel plasmid curing agents that can be effectively used for reversal of plasmid encoded functions such as virulence, antibiotic resistance, etc. In the present study, an active principle responsible for the plasmid curing activity was purified from roots of Plumbago zeylanica by bioassay guided fractionation and identified as 2-hydroxy-1,4-naphthoquinone (lawsone), on the basis of spectral and analytical data such as NMR, GCMS, FTIR. Plasmid curing activity of lawsone was observed against reference as well as wild plasmids (pBR322, pRK2013, R136, pUPI281, and pUPI282) residing in a range of hosts. Curing of plasmid was confirmed by agarose gel electrophoresis. MICs of antibiotics against A. baumannii A24 (pUPI281) and E. coli (pRK2013) decreased significantly in presence of lawsone suggesting synergy between lawsone and antibiotics. Lawsone also inhibited transfer of plasmid pRK2013 to E. coli either by transformation or conjugation. Viability assays (MTT) revealed that lawsone was not toxic to mammalian cells. Thus, the present investigation has revealed lawsone as an effective plasmid curing agent capable of suppressing development and spread of antibiotic resistance. Further, lawsone has important application in basic research to identify phenotypes encoded by the plasmids in plasmid curing experiments. To the best of our knowledge this is the first report of plasmid curing activity of lawsone isolated from roots of P. zeylanica.

Augmented antibiotic resistance associated with cadmium induced alterations in Salmonella enterica serovar Typhi

In view of the reports on co-selection of metal and antibiotic resistance, recently we have reported that increased cadmium accumulation in Salmonella Typhi Ty2 leads to increased antibiotic resistance. In continuation, the present study was carried to substantiate this association in clinical isolates. Interestingly, the levels of cadmium were found to be more in the clinical isolates which co-related with their antibiotic sensitivity/resistance pattern. On cadmium accumulation, antibiotic(s) sensitive isolates were rendered resistant and the resistant isolates were rendered more resistant as per their minimum inhibitory concentration(s). Further, after subjecting the pathogen to cadmium accumulation, alterations occurring in the cells were assessed. Transgenerational cadmium exposure led to changes in growth response, morphology, proteome, elevated antioxidants other than SOD, increased biofilm formation, decreased intracellular macrophage killing coupled with upregulation of genes encoding metallothionein and metal transporters. Thus, these results indicate that cadmium, if acquired from the environment, being non-degradable can exert a long-lasting selective pressure on Salmonella in the host which may display antibiotic resistance later on, as a result of co-selection. Therefore, appropriate strategies need to be developed to inhibit such an enduring pressure of heavy metals, as these represent one of the factors for the emerging antibiotic resistance in pathogens.

Heavy Metal Resistance Genes Are Associated with blaNDM-1- and blaCTX-M-15-Carrying Enterobacteriaceae

The occurrence of heavy metal resistance genes in multiresistant Enterobacteriaceae possessing bla_NDM-1 or bla_CTX-M-15 genes was examined by PCR and pulsed-field gel electrophoresis with S1 nuclease. Compared with clinical susceptible isolates (10.0% to 30.0%), the pcoA, merA, silC, and arsA genes occurred with higher frequencies in bla_NDM-1-positive (48.8% to 71.8%) and bla_CTX-M-15-positive (19.4% to 52.8%) isolates, and they were mostly located on plasmids. Given the high association of metal resistance genes with multidrug-resistant Enterobacteriaceae, increased vigilance needs to be taken with the use of heavy metals in hospitals and the environment.

Lignin peroxidase mediated silver nanoparticle synthesis in Acinetobacter sp

Metals present in environment render the bacteria to attain certain resistance machinery to survive, one of which is transformation of metal ions to nano forms. Various enzymes and proteins have been suggested to play significant role in synthesis of silver nanoparticles (AgNPs) in bacteria. In present study, we have purified lignin peroxidase from secreted enzyme extract of Acinetobacter sp. employing diethyl aminoethyl cellulose ion exchange and Biogel P-150 gel filtration column chromatography. The purified fraction has a specific activity of 1.571 U/mg with substrate n-propanol and 6.5-fold purification. The tetrameric enzyme, with molecular weight of 99 kDa, consisted of dimers of two polypetides of 23.9 and 24.6 kDa as revealed by native and SDS-PAGE. On exposure to purified enzyme, spherical polydispersed AgNPs of ~ 50 nm were obtained as observed under transmission electron microscope. Optimum activity of the purified enzyme was obtained at pH 2 and 60 °C with n-propanol as substrate. This is the first report describing the reduction of extracellular silver ions by lignin peroxidase purified from Acinetobacter sp.

A new insight to adsorption and accumulation of high lead concentration by exopolymer and whole cells of lead-resistant bacterium Acinetobacter junii L. Pb1 isolated from coal mine dump

A lead-resistant bacterial strain was isolated from coal mine dump and identified as Acinetobacter junii Pb1 on basis of 16S rRNA (ribosomal ribonucleic acid) gene sequencing. The minimum inhibitory concentration of lead for the strain was 16,000 mg l^-1 and it showed antibiotic and multi metal resistance. In aqueous culture, at an initial lead (Pb(II)) concentration of 100 and 500 mg l^-1, lead adsorption and accumulation by the isolate was 100 and 60%, at pH 7 at 30 °C after 48 and 120 h, respectively. The two fractions of exopolysaccharide (EPS), loosely associated EPS (laEPS) and bound EPS (bEPS), and whole cells (devoid of EPS) showed high binding affinity towards Pb(II). The binding affinity of laEPS towards Pb(II) (1071 mg Pb g^-1) was three times higher than that of bEPS (321.5 mg Pb g^-1) and 6.5 times higher than that of whole cells (165 mg Pb g^-1). The binding affinity of EPS and whole cells with Pb(II), reported in the current study, is considerably higher as compared to that reported in the literature, till date. SEM analysis, showed an increase in thickness of cells on exposure to Pb(II) and TEM analysis, revealed its accumulation (interior of cell) and its adsorption (with the external cell surface). The isolate was also found to be positive for indole acetic acid (IAA) and 1-aminocyclopropane-1-carboxylate (ACC) deaminase production which helps in promoting plant growth. Thus, this study provides a new understanding towards Pb(II) uptake by A. junii Pb1, highlighting its potential on the restoration of Pb(II) contaminated repositories.

Relationship between antibiotic resistance genes and metals in residential soil samples from Western Australia

Increasing drug-resistant infections have drawn research interest towards examining environmental bacteria and the discovery that many factors, including elevated metal conditions, contribute to proliferation of antibiotic resistance (AR). This study examined 90 garden soils from Western Australia to evaluate predictions of antibiotic resistance genes from total metal conditions by comparing the concentrations of 12 metals and 13 genes related to tetracycline, beta-lactam and sulphonamide resistance. Relationships existed between metals and genes, but trends varied. All metals, except Se and Co, were related to at least one AR gene in terms of absolute gene numbers, but only Al, Mn and Pb were associated with a higher percentage of soil bacteria exhibiting resistance, which is a possible indicator of population selection. Correlations improved when multiple factors were considered simultaneously in a multiple linear regression model, suggesting the possibility of additive effects occurring. Soil-metal concentrations must be considered when determining risks of AR in the environment and the proliferation of resistance.

Copper Resistance of the Emerging Pathogen Acinetobacter baumannii

Acinetobacter baumannii is an important emerging pathogen that is capable of causing many types of severe infection, especially in immunocompromised hosts. Since A. baumannii can rapidly acquire antibiotic resistance genes, many infections are on the verge of being untreatable, and novel therapies are desperately needed. To investigate the potential utility of copper-based antibacterial strategies against Acinetobacter infections, we characterized copper resistance in a panel of recent clinical A. baumannii isolates. Exposure to increasing concentrations of copper in liquid culture and on solid surfaces resulted in dose-dependent and strain-dependent effects; levels of copper resistance varied broadly across isolates, possibly resulting from identified genotypic variation among strains. Examination of the growth-phase-dependent effect of copper on A. baumannii revealed that resistance to copper increased dramatically in stationary phase. Moreover, A. baumannii biofilms were more resistant to copper than planktonic cells but were still susceptible to copper toxicity. Exposure of bacteria to subinhibitory concentrations of copper allowed them to better adapt to and grow in high concentrations of copper; this copper tolerance response is likely achieved via increased expression of copper resistance mechanisms. Indeed, genomic analysis revealed numerous putative copper resistance proteins that share amino acid homology to known proteins in Escherichia coli and Pseudomonas aeruginosa Transcriptional analysis revealed significant upregulation of these putative copper resistance genes following brief copper exposure. Future characterization of copper resistance mechanisms may aid in the search for novel antibiotics against Acinetobacter and other highly antibiotic-resistant pathogens.

IMPORTANCE

Acinetobacter baumannii causes many types of severe nosocomial infections; unfortunately, some isolates have acquired resistance to almost every available antibiotic, and treatment options are incredibly limited. Copper is an essential nutrient but becomes toxic at high concentrations. The inherent antimicrobial properties of copper give it potential for use in novel therapeutics against drug-resistant pathogens. We show that A. baumannii clinical isolates are sensitive to copper in vitro, both in liquid and on solid metal surfaces. Since bacterial resistance to copper is mediated though mechanisms of efflux and detoxification, we identified genes encoding putative copper-related proteins in A. baumannii and showed that expression of some of these genes is regulated by the copper concentration. We propose that the antimicrobial effects of copper may be beneficial in the development of future therapeutics that target multidrug-resistant bacteria.

Bacteriagenic silver nanoparticles: synthesis, mechanism, and applications

Silver nanoparticles (AgNPs) have received tremendous attention due to their significant antimicrobial properties. Large numbers of reports are available on the physical, chemical, and biological syntheses of colloidal AgNPs. Since there is a great need to develop ecofriendly and sustainable methods, biological systems like bacteria, fungi, and plants are being employed to synthesize these nanoparticles. The present review focuses specifically on bacteria-mediated synthesis of AgNPs, its mechanism, and applications. Bacterial synthesis of extra- and intracellular AgNPs has been reported using biomass, supernatant, cell-free extract, and derived components. The extracellular mode of synthesis is preferred over the intracellular mode owing to easy recovery of nanoparticles. Silver-resistant genes, c-type cytochromes, peptides, cellular enzymes like nitrate reductase, and reducing cofactors play significant roles in AgNP synthesis in bacteria. Organic materials released by bacteria act as natural capping and stabilizing agents for AgNPs, thereby preventing their aggregation and providing stability for a longer time. Regulation over reaction conditions has been suggested to control the morphology, dispersion, and yield of nanoparticles. Bacterial AgNPs have anticancer and antioxidant properties. Moreover, the antimicrobial activity of AgNPs in combination with antibiotics signifies their importance in combating the multidrug-resistant pathogenic microorganisms. Multiple microbicidal mechanisms exhibited by AgNPs, depending upon their size and shape, make them very promising as novel nanoantibiotics.

Heavy-metal resistance in Gram-negative bacteria isolated from Kongsfjord, Arctic

Isolation and characterization of heterotrophic Gram-negative bacteria was carried out from the sediment and water samples collected from Kongsfjord, Arctic. In this study, the potential of Arctic bacteria to tolerate heavy metals that are of ecological significance to the Arctic (selenium (Se), mercury (Hg), cadmium (Cd), copper (Cu), lead (Pb), and zinc (Zn)) was investigated. Quantitative assay of 130 isolates by means of plate diffusion and tube dilution methods was carried out by incorporation of different concentrations of metals. Growth in Se and Pb at a concentration of 3000 μg/L was significantly lower (P≤0.0001) than at 2000 μg/L. The minimum inhibitory concentration for Cd and Hg was 50 μg/L (P≤0.0001, F=264.23 and P≤0.0001, F=291.08, respectively) even though in the tube dilution test, Hg-containing tubes showed much less growth, revealing its superior toxicity to Cd. Thus, the level of toxicity of heavy metals was found to be in the order of Hg>Cd>Cu>Zn>Pb>Se. Multiple-metal-resistant isolates were investigated for their resistance against antibiotics, and a positive correlation was observed between antibiotic and metal resistance for all the isolates tested. The resistant organisms thus observed might influence the organic and inorganic cycles in the Arctic and affect the ecosystem.

Characterization and Fungal Inhibition Activity of Siderophore from Wheat Rhizosphere Associated Acinetobacter calcoaceticus Strain HIRFA32

Acinetobacter calcoaceticus HIRFA32 from wheat rhizosphere produced catecholate type of siderophore with optimum siderophore (ca. 92 % siderophore units) in succinic acid medium without FeSO4 at 28 °C and 24 h of incubation. HPLC purified siderophore appeared as pale yellow crystals with molecular weight [M(+1)] m/z 347.18 estimated by LCMS. The structure elucidated by (1)H NMR, (13)C NMR, HMQC, HMBC, NOESY and decoupling studies, revealed that siderophore composed of 2,3-dihydroxybenzoic acid with hydroxyhistamine and threonine as amino acid subunits. In vitro study demonstrated siderophore mediated mycelium growth inhibition (ca. 46.87 ± 0.5 %) of Fusarium oxysporum. This study accounts to first report on biosynthesis of acinetobactin-like siderophore by the rhizospheric strain of A. calcoaceticus and its significance in inhibition of F. oxysporum.

Quantification of polyketide synthase genes in tropical urban soils using real-time PCR

Polyketide synthases (PKSs) catalyze the biosynthesis of polyketides and may contribute to the natural production of antibiotics and pose selective pressure for the development of antibiotic resistant bacteria in the environment. Although conventional PCR have been developed to detect the presence of PKS genes, no previous studies have been done to quantify the abundance of PKS genes in environmental samples. In this study, two sets of degenerate real-time PCR (qPCR) primers (PKS1-F/PKS1-R, PKS2-F/PKS2-R) with high specificity and sensitivity were developed to quantify PKS type I and type II genes. These primers were subsequently used to quantify PKS genes in tropical urban soils, and both PKS genes were widely detected in all soil samples. The absolute abundance of PKS type I ranged from 1.7×10(6) to 4.7×10(6) copies per gram of soil and the absolute abundance of PKS type II genes ranged from 2.4×10(5) to 1.5×10(6) per gram of soil, and the abundance of PKS type I gene was consistently higher than that of PKS type II gene. The relative abundance of PKS type I gene was positively correlated with that of PKS type II gene (p<0.01). Regression analyses indicate that PKS gene abundance was negatively correlated with environmental factors, such as selected antibiotics, sulfate, and metals (p<0.05), but was not correlated with land use type. The studies on the correlation between environmental factors and PKS genes could provide useful information to understand natural production of antibiotics and its associated environmental risks.

Rapid efficient synthesis and characterization of silver, gold, and bimetallic nanoparticles from the medicinal plant Plumbago zeylanica and their application in biofilm control

BACKGROUND

Nanoparticles (NPs) have gained significance in medical fields due to their high surface-area-to-volume ratio. In this study, we synthesized NPs from a medicinally important plant - Plumbago zeylanica.

MATERIALS AND METHODS

Aqueous root extract of P. zeylanica (PZRE) was analyzed for the presence of flavonoids, sugars, and organic acids using high-performance thin-layer chromatography (HPTLC), gas chromatography-time of flight-mass spectrometry (GC-TOF-MS), and biochemical methods. The silver NPs (AgNPs), gold NPs (AuNPs), and bimetallic NPs (AgAuNPs) were synthesized from root extract and characterized using ultraviolet-visible spectra, X-ray diffraction (XRD), energy-dispersive spectrometry (EDS), transmission electron microscopy (TEM), and dynamic light scattering (DLS). The effects of these NPs on Acinetobacter baumannii, Staphylococcus aureus, and Escherichia coli biofilms were studied using quantitative biofilm inhibition and disruption assays, as well as using fluorescence, scanning electron microscopy, and atomic force microscopy.

RESULTS

PZRE showed the presence of phenolics, such as plumbagin, and flavonoids, in addition to citric acid, sucrose, glucose, fructose, and starch, using HPTLC, GC-TOF-MS, and quantitative analysis. Bioreduction of silver nitrate (AgNO₃) and chloroauric acid (HAuCl₄) were confirmed at absorbances of 440 nm (AgNPs), 570 nm (AuNPs), and 540 nm (AgAuNPs), respectively. The maximum rate of synthesis at 50°C was achieved with 5 mM AgNO₃ within 4.5 hours for AgNPs; and with 0.7 mM HAuCl4 within 5 hours for AuNPs. The synthesis of AgAuNPs, which completed within 90 minutes with 0.7 mM AgNO₃ and HAuCl₄, was found to be the fastest. Fourier-transform infrared spectroscopy confirmed bioreduction, while EDS and XRD patterns confirmed purity and the crystalline nature of the NPs, respectively. TEM micrographs and DLS showed about 60 nm monodispersed Ag nanospheres, 20-30 nm Au nanospheres adhering to form Au nanotriangles, and about 90 nm hexagonal blunt-ended AgAuNPs. These NPs also showed antimicrobial and antibiofilm activity against E. coli, A. baumannii, S. aureus, and a mixed culture of A. baumannii and S. aureus. AgNPs inhibited biofilm in the range of 96%-99% and AgAuNPs from 93% to 98% in single-culture biofilms. AuNPs also showed biofilm inhibition, with the highest of 98% in S. aureus. AgNPs also showed good biofilm disruption, with the highest of 88% in A. baumannii.

CONCLUSION

This is the first report on rapid and efficient synthesis of AgNPs, AuNPs and AgAuNPs from P. zeylanica and their effect on quantitative inhibition and disruption of bacterial biofilms.

Multiple antibiotic resistances in metal tolerant E. coli from hospital waste water

Study of antibiotic resistance was done among the metal tolerant E. coli isolates from hospital wastewater at Lucknow city. Metal tolerance was determined in terms of visible growth on metal amended plates at their varying concentrations. MICs were also determined among all metal tolerant E. coli isolates. All the isolates showed their MIC in between 100-2000 µg/ml while maximum isolates demonstrated their MICs at 400, 800 and 1600 µg/ml against all the metal tested. 23.07% of the isolates showed their MIC at 2000 µg/ml against Ni(3+). Multiple antibiotic resistances were recorded among all the metal resistant E.coli isolates. A high level of resistance was observed against Methicillin (86.53%) followed by penicillin (73.07%), Cephradin (57.69%), Rifampicin (34.61%), Erythromycin (26.92%), Nalidixic acids (25%), Chloramphenicol (3.84%) and least to Gentamycine (1.92%). Streptomycin was recorded most effective against E.coli isolates among the entire antibiotic tested. Antimicrobial resistance observed among the bacteria from the aquatic system contaminated with hospital wastes may be threatful for the environment and public health both.

Synthesis, optimization, and characterization of silver nanoparticles from Acinetobacter calcoaceticus and their enhanced antibacterial activity when combined with antibiotics

Background

The development of nontoxic methods of synthesizing nanoparticles is a major step in nanotechnology to allow their application in nanomedicine. The present study aims to biosynthesize silver nanoparticles (AgNPs) using a cell-free extract of Acinetobacter spp. and evaluate their antibacterial activity.

Methods

Eighteen strains of Acinetobacter were screened for AgNP synthesis. AgNPs were characterized using various techniques. Reaction parameters were optimized, and their effect on the morphology of AgNPs was studied. The synergistic potential of AgNPs on 14 antibiotics against seven pathogens was determined by disc-diffusion, broth-microdilution, and minimum bactericidal concentration assays. The efficacy of AgNPs was evaluated as per the minimum inhibitory concentration (MIC) breakpoints of the Clinical and Laboratory Standards Institute (CLSI) guidelines.

Results

Only A. calcoaceticus LRVP54 produced AgNPs within 24 hours. Monodisperse spherical nanoparticles of 8–12 nm were obtained with 0.7 mM silver nitrate at 70°C. During optimization, a blue-shift in ultraviolet-visible spectra was seen. X-ray diffraction data and lattice fringes (d =0.23 nm) observed under high-resolution transmission electron microscope confirmed the crystallinity of AgNPs. These AgNPs were found to be more effective against Gram-negative compared with Gram-positive microorganisms. Overall, AgNPs showed the highest synergy with vancomycin in the disc-diffusion assay. For Enterobacter aerogenes, a 3.8-fold increase in inhibition zone area was observed after the addition of AgNPs with vancomycin. Reduction in MIC and minimum bactericidal concentration was observed on exposure of AgNPs with antibiotics. Interestingly, multidrug-resistant A. baumannii was highly sensitized in the presence of AgNPs and became susceptible to antibiotics except cephalosporins. Similarly, the vancomycin-resistant strain of Streptococcus mutans was also found to be susceptible to antibiotic treatment when AgNPs were added. These biogenic AgNPs showed significant synergistic activity on the β-lactam class of antibiotics.

Conclusion

This is the first report of synthesis of AgNPs using A. calcoaceticus LRVP54 and their significant synergistic activity with antibiotics resulting in increased susceptibility of multidrug-resistant bacteria evaluated as per MIC breakpoints of the CLSI standard.

Biofilm formation by Acinetobacter baumannii strains isolated from urinary tract infection and urinary catheters

Fifty Acinetobacter isolates were obtained from urinary tract infections and urinary catheter samples. Analytical profile index assays identified 47 isolates as Acinetobacter baumannii and three as Acinetobacter lwoffii. Six A. baumannii isolates (A1-A6) displayed hydrophobicity indices >70%. Twenty isolates exhibited lectin activity. Biofilm formation by these isolates was compared with those with low hydrophobicity index values (A45-A50). Biofilms on different surfaces were confirmed by light microscopy, epifluorescence microscopy and by obtaining scanning electron microscope images. Biofilm production was maximal at 30 °C, pH 7.0 in a medium with 5.0 g L(-1) NaCl, and its efficiency was reduced on urinary catheter surfaces at sub-minimum inhibitory concentration concentrations of colistin. Plasmid-mediated antibiotic resistance was observed in selected isolates of A. baumannii and experiments of conjugation and transformation showed the occurrence of gene transfer. Plasmid curing was used to examine the function of plasmids. Five plasmids of A. baumannii A3 were cured but no differences were observed between wild-type and plasmid-cured strains with respect to the biofilm formation capabilities. The prevalence of A. baumannii strains with biofilm mode of growth could explain their ability to persist in clinical environments and their role in device-related infections.

Megacities as sources for pathogenic bacteria in rivers and their fate downstream

Poor sanitation, poor treatments of waste water, as well as catastrophic floods introduce pathogenic bacteria into rivers, infecting and killing many people. The goal of clean water for everyone has to be achieved with a still growing human population and their rapid concentration in large cities, often megacities. How long introduced pathogens survive in rivers and what their niches are remain poorly known but essential to control water-borne diseases in megacities. Biofilms are often niches for various pathogens because they possess high resistances against environmental stress. They also facilitate gene transfers of antibiotic resistance genes which become an increasing health problem. Beside biofilms, amoebae are carriers of pathogenic bacteria and niches for their survival. An overview about our current understanding of the fate and niches of pathogens in rivers, the multitude of microbial community interactions, and the impact of severe flooding, a prerequisite to control pathogens in polluted rivers, is given.

Ecology and evolution of antibiotic resistance

The evolution of bacterial pathogens towards antibiotic resistance is not just a relevant problem for human health, but a fascinating example of evolution that can be studied in real time as well. Although most antibiotics are natural compounds produced by environmental microbiota, exposure of bacterial populations to high concentrations of these compounds as the consequence of their introduction for human therapy (and later on for farming) a few decades ago is a very recent situation in evolutionary terms. Resistance genes are originated in environmental bacteria, where they have evolved for millions of years to play different functions that include detoxification, signal trafficking or metabolic functions among others. However, as the consequence of the strong selective pressure exerted by antimicrobials at clinical settings, farms and antibiotic-contaminated natural ecosystems, the selective forces driving the evolution of these potential resistance determinants have changed in the last few decades. Natural ecosystems contain a large number of potential resistance genes; nevertheless, just a few of them are currently present in gene-transfer units and disseminated among pathogens. Along the review, the processes implied in this situation and the consequences for the future evolution of resistance and the environmental microbiota are discussed.

Microbial diversity of boron-rich volcanic hot springs of St. Lucia, Lesser Antilles

The volcanic Sulphur Springs, St. Lucia, present an extreme environment due to high temperatures, low pH values, and high concentrations of sulfate and boron. St. Lucia offers some unique geochemical characteristics that may shape the microbial communities within the Sulphur Springs area. We chose six pools representing a range of geochemical characteristics for detailed microbial community analyses. Chemical concentrations varied greatly between sites. Microbial diversity was analyzed using 16S rRNA gene clone library analyses. With the exception of one pool with relatively low concentrations of dissolved ions, microbial diversity was very low, with Aquificales sequences dominating bacterial communities at most pools. The archaeal component of all pools was almost exclusively Acidianus spp. and did not vary between sites with different chemical characteristics. In the pool with the highest boron and sulfate concentrations, only archaeal sequences were detected. Compared with other sulfur springs such as those at Yellowstone, the microbial diversity at St. Lucia is very different, but it is similar to that at the nearby Lesser Antilles island of Montserrat. While high elemental concentrations seem to be related to differences in bacterial diversity here, similarities with other Lesser Antilles sites suggest that there may be a biogeographical component as well.

Antiplasmid activity of 1'-acetoxychavicol acetate from Alpinia galanga against multi-drug resistant bacteria

ETHNOPHARMACOLOGICAL RELEVANCE

Alpinia galanga (L.) Swartz is traditionally used in the treatment of various ailments across India, China, and Southeast Asian countries. In India it is a reputed drug in indigenous system of medicine and largely used as antibacterial and antiseptic. In southern India the rhizomes has been used as a domestic remedy against bacterial infections.

AIM OF THE STUDY

To identify a potential antiplasmid compound from Alpinia galanga against multi-drug resistant bacteria.

MATERIALS AND METHODS

The crude rhizome extract of Alpinia galanga was prepared in acetone. Antibacterial activity was checked by MIC and antiplasmid activity was checked by SIC. The principal compound responsible for the antiplasmid activity, in the crude extract, was identified by bioassay guided fractionation using hexane-acetone. Antibiotic resistance profile of plasmid harboring strains and plasmid cured strains was determined by disc diffusion method.

RESULTS

The crude acetone extract of the rhizomes of Alpinia galanga exhibited antiplasmid activity against Salmonella typhi, Escherichia coli and vancomycin resistant Enterococcus faecalis with an efficiency of 92%, 82% and 8% respectively at 400 microg/ml SIC. The principal compound responsible for the activity was identified as 1'-acetoxychavicol acetate. 1'-Acetoxychavicol acetate demonstrated the ability to cure plasmid encoded antibiotic resistance in various multi-drug resistant bacterial strains of clinical isolates such as Enterococcus faecalis, Salmonella typhi, Pseudomonas aeruginosa, Escherichia coli and Bacillus cereus with curing efficiency of 66%, 75%, 70%, 32% and 6% respectively at SIC of 400-800 microg/ml.

CONCLUSION

1'-Acetoxychavicol acetate mediated R-plasmid curing significantly reduced the minimal inhibitory concentration of antibiotics required to inhibit growth of bacteria, thus making the antibiotic treatment more effective.

Wastewater treatment contributes to selective increase of antibiotic resistance among Acinetobacter spp

The occurrence and spread of multi-drug resistant bacteria is a pressing public health problem. The emergence of bacterial resistance to antibiotics is common in areas where antibiotics are heavily used, and antibiotic-resistant bacteria also increasingly occur in aquatic environments. The purpose of the present study was to evaluate the impact of the wastewater treatment process on the prevalence of antibiotic resistance in Acinetobacter spp. in the wastewater and its receiving water. During two different events (high-temperature, high-flow, 31 degrees C; and low-temperature, low-flow, 8 degrees C), 366 strains of Acinetobacter spp. were isolated from five different sites, three in a wastewater treatment plant (raw influent, second effluent, and final effluent) and two in the receiving body (upstream and downstream of the treated wastewater discharge point). The antibiotic susceptibility phenotypes were determined by the disc-diffusion method for 8 antibiotics, amoxicillin/clavulanic acid (AMC), chloramphenicol (CHL), ciprofloxacin (CIP), colistin (CL), gentamicin (GM), rifampin (RA), sulfisoxazole (SU), and trimethoprim (TMP). The prevalence of antibiotic resistance in Acinetobacter isolates to AMC, CHL, RA, and multi-drug (three antibiotics or more) significantly increased (p<0.01) from the raw influent samples (AMC, 8.7%; CHL, 25.2%; RA, 63.1%; multi-drug, 33.0%) to the final effluent samples (AMC, 37.9%; CHL, 69.0%; RA, 84.5%; multi-drug, 72.4%), and was significantly higher (p<0.05) in the downstream samples (AMC, 25.8%; CHL, 48.4%; RA, 85.5%; multi-drug, 56.5%) than in the upstream samples (AMC, 9.5%; CHL, 27.0%; RA, 65.1%; multi-drug, 28.6%). These results suggest that wastewater treatment process contributes to the selective increase of antibiotic resistant bacteria and the occurrence of multi-drug resistant bacteria in aquatic environments.

The role of natural environments in the evolution of resistance traits in pathogenic bacteria

Antibiotics are among the most valuable compounds used for fighting human diseases. Unfortunately, pathogenic bacteria have evolved towards resistance. One important and frequently forgotten aspect of antibiotics and their resistance genes is that they evolved in non-clinical (natural) environments before the use of antibiotics by humans. Given that the biosphere is mainly formed by micro-organisms, learning the functional role of antibiotics and their resistance elements in nature has relevant implications both for human health and from an ecological perspective. Recent works have suggested that some antibiotics may serve for signalling purposes at the low concentrations probably found in natural ecosystems, whereas some antibiotic resistance genes were originally selected in their hosts for metabolic purposes or for signal trafficking. However, the high concentrations of antibiotics released in specific habitats (for instance, clinical settings) as a consequence of human activity can shift those functional roles. The pollution of natural ecosystems by antibiotics and resistance genes might have consequences for the evolution of the microbiosphere. Whereas antibiotics produce transient and usually local challenges in microbial communities, antibiotic resistance genes present in gene-transfer units can spread in nature with consequences for human health and the evolution of environmental microbiota that are largely ignored.

Antibiotic resistance in bacteria isolated from the deep terrestrial subsurface

Various natural environments have been examined for the presence of antibiotic-resistant bacteria and/or novel resistance mechanisms, but little is known about resistance in the terrestrial deep subsurface. This study examined two deep environments that differ in their known period of isolation from surface environments and the bacteria therein. One hundred fifty-four strains of bacteria were isolated from sediments located 170-259 m below land surface at the US Department of Energy Savannah River Site (SRS) in South Carolina and Hanford Site (HS) in Washington. Analyses of 16S rRNA gene sequences showed that both sets of strains were phylogenetically diverse and could be assigned to several genera in three to four phyla. All of the strains were screened for resistance to 13 antibiotics by plating on selective media and 90% were resistant to at least one antibiotic. Eighty-six percent of the SRS and 62% of the HS strains were resistant to more than one antibiotic. Resistance to nalidixic acid, mupirocin, or ampicillin was noted most frequently. The results indicate that antibiotic resistance is common among subsurface bacteria. The somewhat higher frequencies of resistance and multiple resistance at the SRS may, in part, be due to recent surface influence, such as exposure to antibiotics used in agriculture. However, the HS strains have never been exposed to anthropogenic antibiotics but still had a reasonably high frequency of resistance. Given their long period of isolation from surface influences, it is possible that they possess some novel antibiotic resistance genes and/or resistance mechanisms.

Spatial analysis of antibiotic resistance along metal contaminated streams

The spatial pattern of antibiotic resistance in culturable sediment bacteria from four freshwater streams was examined. Previous research suggests that the prevalence of antibiotic resistance may increase in populations via indirect or coselection from heavy metal contamination. Sample bacteria from each stream were grown in media containing one of four antibiotics-tetracycline, chloramphenicol, kanamycin, and streptomycin-at concentrations greater than the minimum inhibitory concentration, plus a control. Bacteria showed high susceptibilities to the former two antibiotics. We summarized the latter two more prevalent (aminoglycoside) resistance responses and ten metals concentrations per sediment sample, by Principal Components Analysis. Respectively, 63 and 58% of the variability was explained in the first principal component of each variable set. We used these multivariate summary metrics [i.e., first principal component (PC) scores] as input measures for exploring the spatial correlation between antibiotic resistance and metal concentration for each stream sampled. Results show a significant and negative correlation between metals PC scores versus aminoglycoside resistance scores and suggest that selection for metal tolerance among sediment bacteria may influence selection for antibiotic resistance differently in sediments than in the water column. Our most important finding comes from geostatistical cross-variogram analysis, which shows that increasing metal concentration scores are spatially associated with decreasing aminoglycoside resistance scores--a negative correlation, but holds for contaminated streams only. We suspect our field results are influenced by metal bioavailability in the sediments and by a contaminant promoted interaction or "cocktail effect" from complex combinations of pollution mediated selection agents.

Bacterial diversity in mine tailings compared by cultivation and cultivation-independent methods and their resistance to lead and cadmium

To examine bacterial community composition in rhizosphere of plants colonizing on mine tailings and phylogenetic differences between subcommunities resistant to different metals, we constructed four clone libraries of 16S rDNA sequences. One was amplified directly from tailing microbial DNA (named as Ci library) and three from cultures on the plates containing of 0.5 mM CdCl(2) (Cd library), 2 mM Pb (NO(3))(2) (Pb library), and without any metals (Cw library). In total, nine bacterial divisions and two unclassified groups were identified from 352 clones of these libraries. Ci clones covered eight divisions, whereas all cultivable clones only covered four divisions. Thus, Ci library provided more phylogenetic diversity than cultivable libraries. However, the microbes represented by the cultivable clones were more similar to previously described bacteria than those represented by Ci clones. All Ci clones were not found in three cultivable libraries. Cd library were exclusively Gram-negative bacteria of Acinetobacter, Ralstonia, Comamonas, and Chryseobacterium. Meanwhile, dominant Gram-positive bacteria in Pb library, Paenibacillus and Bacillus, were also not found in Cd library. Our data indicate that phylogenetic structure was very different from those in acid mine drainage. Meanwhile, tailings harbored phylogenetically distinct subcommunities resistant to Pb and Cd.

Metabolically active microbial communities in uranium-contaminated subsurface sediments

In order to develop effective bioremediation strategies for radionuclide contaminants, the composition and metabolic potential of microbial communities need to be better understood, especially in highly contaminated subsurface sediments for which little cultivation-independent information is available. In this study, we characterized metabolically active and total microbial communities associated with uranium-contaminated subsurface sediments along geochemical gradients. DNA and RNA were extracted and amplified from four sediment-depth intervals representing moderately acidic (pH 3.7) to near-neutral (pH 6.7) conditions. Phylotypes related to Proteobacteria (Alpha-, Beta-, Delta- and Gammaproteobacteria), Bacteroidetes, Actinobacteria, Firmicutes and Planctomycetes were detected in DNA- and RNA-derived clone libraries. Diversity and numerical dominance of phylotypes were observed to correspond to changes in sediment geochemistry and rates of microbial activity, suggesting that geochemical conditions have selected for well-adapted taxa. Sequences closely related to nitrate-reducing bacteria represented 28% and 43% of clones from the total and metabolically active fractions of the microbial community, respectively. This study provides the first detailed analysis of total and metabolically active microbial communities in radionuclide-contaminated subsurface sediments. Our microbial community analysis, in conjunction with rates of microbial activity, points to several groups of nitrate-reducers that appear to be well adapted to environmental conditions common to radionuclide-contaminated sites.

Tolerance and biosorption of copper and zinc by Pseudomonas putida CZ1 isolated from metal-polluted soil

A strain of Pseudomonas sp. CZ1, which was isolated from the rhizosphere of Elsholtzia splendens obtained from the heavy-metal-contaminated soil in the north-central region of the Zhejiang province of China, has been studied for tolerance to copper (Cu) and zinc (Zn) and its capacities for biosorption of these metals. Based on 16S ribosomal DNA sequencing, the microorganism was closely related to Pseudomonas putida. It exhibited high minimal inhibitory concentration values (about 3 mmol Cu.L-1 and 5 mmol Zn.L-1) for metals and antibiotic resistance to ampicillin but not to kanamycin. Based on the results of heavy metal toxicity screening, inhibitory concentrations in solid media were lower than those in liquid media. Moreover, it was found that the toxicity of Cu was higher than that of Zn. Pseudomonas putida CZ1 was capable of removing about 87.2% of Cu and 99.8% of Zn during the active growth cycle, with specific biosorption capacities of 24.2 and 26.0 mg x L-1, respectively. Although at low concentrations, Cu and Zn slightly damage the surface of some cells, P. putida demonstrated high capacities for biosorption of Cu and Zn. Since P. putida CZ1 could grow in the presence of significant concentrations of metals and because of its high metal uptake capacity in aerobic conditions, this bacterium may be potentially applicable in bioreactors or in situ bioremediation of heavy-metal-contaminated aqueous or soil systems.

Co-selection of antibiotic and metal resistance

There is growing concern that metal contamination functions as a selective agent in the proliferation of antibiotic resistance. Documented associations between the types and levels of metal contamination and specific patterns of antibiotic resistance suggest that several mechanisms underlie this co-selection process. These co-selection mechanisms include co-resistance (different resistance determinants present on the same genetic element) and cross-resistance (the same genetic determinant responsible for resistance to antibiotics and metals). Indirect but shared regulatory responses to metal and antibiotic exposure such as biofilm induction also represent potential co-selection mechanisms used by prokaryotes. Metal contamination, therefore, represents a long-standing, widespread and recalcitrant selection pressure with both environmental and clinical importance that potentially contributes to the maintenance and spread of antibiotic resistance factors.

Characterization of a mercury-reducing Bacillus cereus strain isolated from the Pulicat Lake sediments, south east coast of India

Pulicat Lake sediments are often severely polluted with the toxic heavy metal mercury. Several mercury-resistant strains of Bacillus species were isolated from the sediments and all the isolates exhibited broad spectrum resistance (resistance to both organic and inorganic mercuric compounds). Plasmid curing assay showed that all the isolated Bacillus strains carry chromosomally borne mercury resistance. Polymerase chain reaction and southern hybridization analyses using merA and merB3 gene primers/probes showed that five of the isolated Bacillus strains carry sequences similar to known merA and merB3 genes. Results of multiple sequence alignment revealed 99% similarity with merA and merB3 of TnMERI1 (class II transposons). Other mercury resistant Bacillus species lacking homology to these genes were not able to volatilize mercuric chloride, indicating the presence of other modes of resistance to mercuric compounds.

Metal tolerance and biosorption capacity of Bacillus circulans strain EB1

A heavy-metal-resistant bacterium Bacillus sp., strain EB1 was isolated from heavy-metal-contaminated soil in the southeast region of Turkey. Based on 16S ribosomal DNA sequencing, the microorganism was closely related to Bacillus circulans. Minimal inhibitory concentrations of metals (MICs) for the bacterium were determined. Bacillus EB1 exhibited high MIC values for metals and a large spectrum of antibiotic resistance. The order of toxicity of the metals to the bacterium was Cd=Co>Cu>Ni>Zn>Mn in solid media. The effects of increasing metal concentrations to the growth rate were determined in order to obtain precise patterns of resistance in liquid cultures. From the results of heavy metal toxicity, inhibitory concentrations in solid media were higher than those in liquid media. Metal biosorption was determined during the course of growth. B. circulans strain EB1 was capable of removing 90% of Mn, 68% of Zn, 65% of Cu, 45% of Ni and 40% of Co during the active growth cycle with a specific biosorption capacity of 25, 22, 20, 13 and 12 mg/l, respectively. Since Bacillus cells could grow in the presence of significant concentrations of metals and due to high metal biosorption capacity in aerobic conditions, this bacterium may be potentially applicable in in situ bioremediation of heavy-metal-contaminated aqueous systems.