Detachment ofPseudomonas fluorescens from biofilms on glass surfaces in response to nutrient stress

Physiology, fast and slow: bacterial response to variable resource stoichiometry and dilution rate

Microorganisms grow despite imbalances in the availability of nutrients and energy. The biochemical and elemental adjustments that bacteria employ to sustain growth when these resources are suboptimal are not well understood. We assessed how Pseudomonas putida KT2440 adjusts its physiology at differing dilution rates (to approximate growth rates) in response to carbon (C), nitrogen (N), and phosphorus (P) stress using chemostats. Cellular elemental and biomolecular pools were variable in response to different limiting resources at a slow dilution rate of 0.12 h-1, but these pools were more similar across treatments at a faster rate of 0.48 h-1. At slow dilution rates, limitation by P and C appeared to alter cell growth efficiencies as reflected by changes in cellular C quotas and rates of oxygen consumption, both of which were highest under P- and lowest under C- stress. Underlying these phenotypic changes was differential gene expression of terminal oxidases used for ATP generation that allows for increased energy generation efficiency. In all treatments under fast dilution rates, KT2440 formed aggregates and biofilms, a physiological response that hindered an accurate assessment of growth rate, but which could serve as a mechanism that allows cells to remain in conditions where growth is favorable. Our findings highlight the ways that microorganisms dynamically adjust their physiology under different resource supply conditions, with distinct mechanisms depending on the limiting resource at slow growth and convergence toward an aggregative phenotype with similar compositions under conditions that attempt to force fast growth.

IMPORTANCE

All organisms experience suboptimal growth conditions due to low nutrient and energy availability. Their ability to survive and reproduce under such conditions determines their evolutionary fitness. By imposing suboptimal resource ratios under different dilution rates on the model organism Pseudomonas putida KT2440, we show that this bacterium dynamically adjusts its elemental composition, morphology, pools of biomolecules, and levels of gene expression. By examining the ability of bacteria to respond to C:N:P imbalance, we can begin to understand how stoichiometric flexibility manifests at the cellular level and impacts the flow of energy and elements through ecosystems.

1, 4-naphthoquinone efficiently facilitates the disintegration of pre-existing biofilm of Staphylococcus aureus through eDNA intercalation

1, 4-naphthoquinone, a plant-based quinone derivative, has gained much attention for its effectiveness against several biofilm-linked diseases. The biofilm inhibitory effect of 1, 4-naphthoquinone against Staphylococcus aureus has already been reported in our previous study. We observed that the extracellular DNA (eDNA) could play an important role in holding the structural integrity of the biofilm. Hence, in this study, efforts have been directed to examine the possible interactions between 1, 4-naphthoquinone and DNA. An in silico analysis indicated that 1, 4-naphthoquinone could interact with DNA through intercalation. To validate the same, UV-Vis spectrophotometric analysis was performed in which a hypochromic shift was observed when the said molecule was titrated with calf-thymus DNA (CT-DNA). Thermal denaturation studies revealed a change of 8℃ in the melting temperature (Tm) of CT-DNA when complexed with 1, 4-naphthoquinone. The isothermal calorimetric titration (ITC) assay revealed a spontaneous intercalation between CT-DNA and 1, 4-naphthoquinone with a binding constant of 0.95 ± 0.12 × 108. Furthermore, DNA was run through an agarose gel electrophoresis with a fixed concentration of ethidium bromide and increasing concentrations of 1, 4-naphthoquinone. The result showed that the intensity of ethidium bromide-stained DNA got reduced concomitantly with the gradual increase of 1, 4-naphthoquinone suggesting its intercalating nature. To gain further confidence, the pre-existing biofilm was challenged with ethidium bromide wherein we observed that it could also show biofilm disintegration. Therefore, the results suggested that 1, 4-naphthoquinone could exhibit disintegration of the pre-existing biofilm of Staphylococcus aureus through eDNA intercalation.

Phosphate starvation decouples cell differentiation from DNA replication control in the dimorphic bacterium Caulobacter crescentus

Upon nutrient depletion, bacteria stop proliferating and undergo physiological and morphological changes to ensure their survival. Yet, how these processes are coordinated in response to distinct starvation conditions is poorly understood. Here we compare the cellular responses of Caulobacter crescentus to carbon (C), nitrogen (N) and phosphorus (P) starvation conditions. We find that DNA replication initiation and abundance of the replication initiator DnaA are, under all three starvation conditions, regulated by a common mechanism involving the inhibition of DnaA translation. By contrast, cell differentiation from a motile swarmer cell to a sessile stalked cell is regulated differently under the three starvation conditions. During C and N starvation, production of the signaling molecules (p)ppGpp is required to arrest cell development in the motile swarmer stage. By contrast, our data suggest that low (p)ppGpp levels under P starvation allow P-starved swarmer cells to differentiate into sessile stalked cells. Further, we show that limited DnaA availability, and consequently absence of DNA replication initiation, is the main reason that prevents P-starved stalked cells from completing the cell cycle. Together, our findings demonstrate that C. crescentus decouples cell differentiation from DNA replication initiation under certain starvation conditions, two otherwise intimately coupled processes. We hypothesize that arresting the developmental program either as motile swarmer cells or as sessile stalked cells improves the chances of survival of C. crescentus during the different starvation conditions.

ZIF-8-derived Cu, N co-doped carbon as a bifunctional cathode catalyst for enhanced performance of microbial fuel cell

The development of bifunctional catalysts is an effective way to simultaneously address the slow kinetics of oxygen reduction reaction (ORR) on the cathode and biofilm contamination in the microbial fuel cells (MFC). Cu-N/C@Cu composites were synthesized as bifunctional cathode catalysts for MFC by doping, adsorption, and two calcinations by using Cu-ZIF-8 as the precursor. The higher Cu-N_x content confers excellent ORR catalytic activity to the optimized Cu-N/C@Cu-2 catalyst. The half-wave potential for Cu-N/C@Cu-2 in a neutral solution is 0.67 V vs. RHE, which is close to that of commercial 20% Pt/C (0.70 V vs. RHE). The maximum power density of the MFCs assembled with Cu-N/C@Cu-2 reached 581 ± 13 mW m^-2, which is even better than that using Pt/C (499 ± 13 mW m^-2). Moreover, the results of antimicrobial activity and biomass test show that the higher Cu content made Cu-N/C@Cu-2 effective against the contamination of cathode biofilm. And the 16S rDNA results find that the community structure of the biofilm is favorable for the power production and purification of MFC. This work shows that copper-based materials can be used as potential bifunctional catalysts to promote MFC applications in wastewater treatment.

The Alginate and Motility Regulator AmrZ is Essential for the Regulation of the Dispersion Response by Pseudomonas aeruginosa Biofilms

Dispersion is an active process exhibited by Pseudomonas aeruginosa during the late stages of biofilm development or in response to various cues, including nitric oxide and glutamate. Upon cue sensing, biofilm cells employ enzymes that actively degrade the extracellular matrix, thereby allowing individual cells to become liberated. While the mechanism by which P. aeruginosa senses and relays dispersion cues has been characterized, little is known about how dispersion cue sensing mechanisms result in matrix degradation. Considering that the alginate and motility regulator AmrZ has been reported to regulate genes that play a role in dispersion, including those affecting virulence, c-di-GMP levels, Pel and Psl abundance, and motility, we asked whether AmrZ contributes to the regulation of dispersion. amrZ was found to be significantly increased in transcript abundance under dispersion-inducing conditions, with the inactivation of amrZ impairing dispersion by P. aeruginosa biofilms in response to glutamate and nitric oxide. While the overexpression of genes encoding matrix-degrading enzymes pelA, pslG, and/or endA resulted in the dispersion of wild-type biofilms, similar conditions failed to disperse biofilms formed by dtamrZ. Likewise, the inactivation of amrZ abrogated the hyperdispersive phenotype of PAO1/pJN-bdlA_G31A biofilms, with dtamrZ-impaired dispersion being independent of the expression, production, and activation of BdlA. Instead, dispersion was found to require the AmrZ-target genes napB and PA1891. Our findings indicate that AmrZ is essential for the regulation of dispersion by P. aeruginosa biofilms, functions downstream of BdlA postdispersion cue sensing, and regulates the expression of genes contributing to biofilm matrix degradation as well as napB and PA1891. IMPORTANCE In P. aeruginosa, biofilm dispersion has been well-characterized with respect to dispersion cue perception, matrix degradation, and the consequences of dispersion. While the intracellular signaling molecule c-di-GMP has been linked to many of the phenotypic changes ascribed to dispersion, including the modulation of motility and matrix production, little is known about the regulatory mechanisms leading to matrix degradation and cells actively leaving the biofilm. In this study, we report for the first time an essential role of the transcriptional regulator AmrZ and two AmrZ-dependent genes, napB, and PA1891, in the dispersion response, thereby linking dispersion cue sensing via BdlA to the regulation of matrix degradation and to the ultimate liberation of bacterial cells from the biofilm.

Effect of disinfectant exposure and starvation treatment on the detachment of simulated drinking water biofilms

Biofilms were one of the main habitats of microbes in the drinking water distribution system. The variation of environmental conditions can lead to the detachment of biofilms and the deterioration of water quality. In this study, the effects of disinfectant exposure and starvation treatment on the detachment of biofilms were investigated. The results showed that detaching rate increased with the concentration of chloramine in the inlet water and 1.0 mg/L of chloramine led to the largest detached biomass. The starvation treatment resulted in less biofilm biomass but the detaching rates of treated biofilms were higher than those without starvation. The 16S rRNA sequencing results showed that detached and stubborn biofilms had a significant difference in microbial diversity and richness. The microbial community composition of the two types of biofilm showed the difference in the abundance of Nitrospira, Bryobacter, Hyphomicrobium, and Pedomicrobium. Chloramine exposure did not have a significant impact on the microbial community while the starvation treatment led to a higher abundance of chemolithotrophs bacteria. Metagenomic results indicated that detached biofilms had higher abundances of ARGs and starvation treatment could enrich the ARGs. The results of this research could provide the knowledge of biofilm sloughing and help understand the health risk of antibiotic resistance in drinking water.

Biofouling control: the impact of biofilm dispersal and membrane flushing

Pure culture studies have shown that biofilm dispersal can be triggered if the nutrient supply is discontinued by stopping the flow. Stimulating biofilm dispersal in this manner would provide a sustainable manner to control unwanted biofilm growth in industrial settings, for instance on synthetic membranes used to purify water. The response of multispecies biofilms to nutrient limitation has not been thoroughly studied. To assess biomass dispersal during nutrient limitation it is common practise to flush the biofilm after a stop-period. Hence, flow-stop-induced biomass removal could occur as a response to nutrient limitation followed by mechanical removal due to biofilm flushing (e.g. biofilm detachment). Here, we investigated the feasibility to reduce membrane biofouling by stopping the flow and flushing the membrane. Using a membrane fouling simulator, biomass removal from synthetic membranes after different stop-periods was determined, as well as biomass removal at different cross flow velocities. Biomass removal from membrane surfaces depended on the nutrient limiting period and on the flow velocity during the biofilm flush. When flushed at a low flow velocity (0.1 m.s^-1), the duration of the stop-period had a large effect on the biomass removal rate, but when the flow velocity was increased to 0.2 m.s^-1, the length of the stop period became less considerable. The flow velocity during membrane flushing has an effect on the bacterial community that colonized the membranes afterwards. Repetition of the stop-period and biofilm flushing after three repetitive biofouling cycles led to a stable bacterial community. The increase in bacterial community stability coincided with a decrease in cleaning effectivity to restore membrane performance. This shows that membrane cleaning comes at the costs of a more stable bacterial community that is increasingly difficult to remove.

Insight into c-di-GMP Regulation in Anammox Aggregation in Response to Alternating Feed Loadings

Substrate concentrations generally fluctuate in wastewaters. However, how anammox biomass behaves to overcome the stress of alternating feed loadings remains unclear. Here, we combined long-term reactor operation, batch tests, 16S rRNA transcript sequencing, and metabolomics analysis to investigate the aggregation of anammox biomass under the regulation of c-di-GMP, a key second messenger, in response to alternating feed loadings. We demonstrated that the aggregation process was significantly faster under alternating loadings and was significantly correlated with higher levels of c-di-GMP and extracellular polymeric substances (EPS) production. The increase in c-di-GMP was positively correlated with a higher relative transcript expression level in the c-di-GMP pathway-dependent community. The targeted metabolomics results indicated that the increased production of fructose 6-phosphate and UDP-N-acetyl-d-glucosamine, the precursor substances for the synthesis of exopolysaccharides, was induced by higher levels of c-di-GMP. Consequently, the granulation process was accelerated via EPS production. Higher levels of intracellular hydrophobic amino acids were also positively correlated with increased extracellular protein levels, considering the significant increase in peptides under alternating loadings. On the basis of our findings, we believe that c-di-GMP regulation and EPS production of the anammox biomass are important mechanisms to enhance its tolerance against unfavorable feed stress. These results highlight the role of c-di-GMP in anammox biomass as it works to survive in unfavorable niches.

Biofilm dispersal: multiple elaborate strategies for dissemination of bacteria with unique properties

In most environments, microorganisms evolve in a sessile mode of growth, designated as biofilm, which is characterized by cells embedded in a self-produced extracellular matrix. Although a biofilm is commonly described as a "cozy house" where resident bacteria are protected from aggression, bacteria are able to break their biofilm bonds and escape to colonize new environments. This regulated process is observed in a wide variety of species; it is referred to as biofilm dispersal, and is triggered in response to various environmental and biological signals. The first part of this review reports the main regulatory mechanisms and effectors involved in biofilm dispersal. There is some evidence that dispersal is a necessary step between the persistence of bacteria inside biofilm and their dissemination. In the second part, an overview of the main methods used so far to study the dispersal process and to harvest dispersed bacteria was provided. Then focus was on the properties of the biofilm-dispersed bacteria and the fundamental role of the dispersal process in pathogen dissemination within a host organism. In light of the current body of knowledge, it was suggested that dispersal acts as a potent means of disseminating bacteria with enhanced colonization properties in the surrounding environment.

The Danger Signal Extracellular ATP Is an Inducer of Fusobacterium nucleatum Biofilm Dispersal

Plaque biofilm is the primary etiological agent of periodontal disease. Biofilm formation progresses through multiple developmental stages beginning with bacterial attachment to a surface, followed by development of microcolonies and finally detachment and dispersal from a mature biofilm as free planktonic bacteria. Tissue damage arising from inflammatory response to biofilm is one of the hallmark features of periodontal disease. A consequence of tissue damage is the release of ATP from within the cell into the extracellular space. Extracellular ATP (eATP) is an example of a danger associated molecular pattern (DAMP) employed by mammalian cells to elicit inflammatory and damage healing responses. Although, the roles of eATP as a signaling molecule in multi-cellular organisms have been relatively well studied, exogenous ATP also influences bacteria biofilm formation. Since plaque biofilms are continuously exposed to various stresses including exposure to the host damage factors such as eATP, we hypothesized that eATP, in addition to eliciting inflammation could potentially influence the biofilm lifecycle of periodontal associated bacteria. We found that eATP rather than nutritional factors or oxidative stress induced dispersal of Fusobacterium nucleatum, an organism associated with periodontal disease. eATP induced biofilm dispersal through chelating metal ions present in biofilm. Dispersed F. nucleatum biofilm, regardless of natural or induced dispersal by exogenous ATP, were more adhesive and invasive compared to planktonic or biofilm counterparts, and correspondingly activated significantly more pro-inflammatory cytokine production in infected periodontal fibroblasts. Dispersed F. nucleatum also showed higher expression of fadA, a virulence factor implicated in adhesion and invasion, compared to planktonic or biofilm bacteria. This study revealed for the first time that periodontal bacterium is capable of co-opting eATP, a host danger signaling molecule to detach from biofilms. Our results further showed that dispersed F. nucleatum possessed distinct virulence characteristics compared to their biofilm and planktonic counterparts.

Escaping the biofilm in more than one way: desorption, detachment or dispersion

Biofilm bacteria have developed escape strategies to avoid stresses associated with biofilm growth, respond to changing environmental conditions, and disseminate to new locations. An ever-expanding body of research suggests that cellular release from biofilms is distinct from a simple reversal of attachment and reversion to a planktonic mode of growth, with biofilm dispersion involving sensing of specific cues, regulatory signal transduction, and consequent physiological alterations. However, dispersion is only one of many ways to escape the biofilm mode of growth. The present review is aimed at distinguishing this active and regulated process of dispersion from the passive processes of desorption and detachment by highlighting the regulatory processes and distinct phenotypes specific to dispersed cells.

Optimization of culture conditions for Gardnerella vaginalis biofilm formation

Bacterial vaginosis is the leading vaginal disorder in women in reproductive age. Although bacterial vaginosis is related with presence of a biofilm composed predominantly by Gardnerella vaginalis, there has not been a detailed information addressing the environmental conditions that influence the biofilm formation of this bacterial species. Here, we evaluated the influence of some common culture conditions on G. vaginalis biofilm formation, namely inoculum concentration, incubation period, feeding conditions and culture medium composition. Our results showed that culture conditions strongly influenced G. vaginalis biofilm formation and that biofilm formation was enhanced when starting the culture with a higher inoculum, using a fed-batch system and supplementing the growth medium with maltose.

96-well microtiter plates for biofouling simulation in biomedical settings

Microtiter plates with 96 wells are routinely used in biofilm research mainly because they enable high-throughput assays. These platforms are used in a variety of conditions ranging from static to dynamic operation using different shaking frequencies and orbital diameters. The main goals of this work were to assess the influence of nutrient concentration and flow conditions on biofilm formation by Escherichia coli in microtiter plates and to define the operational conditions to be used in order to simulate relevant biomedical scenarios. Assays were performed in static mode and in incubators with distinct orbital diameters using different concentrations of glucose, peptone and yeast extract. Computational fluid dynamics (CFD) was used to simulate the flow inside the wells for shaking frequencies ranging from 50 to 200 rpm and orbital diameters from 25 to 100 mm. Higher glucose concentrations enhanced adhesion of E. coli in the first 24 h, but variation in peptone and yeast extract concentration had no significant impact on biofilm formation. Numerical simulations indicate that 96-well microtiter plates can be used to simulate a variety of biomedical scenarios if the operating conditions are carefully set.

Biofilms' role in planktonic cell proliferation

The detachment of single cells from biofilms is an intrinsic part of this surface-associated mode of bacterial existence. Pseudomonas sp. strain CT07gfp biofilms, cultivated in microfluidic channels under continuous flow conditions, were subjected to a range of liquid shear stresses (9.42 mPa to 320 mPa). The number of detached planktonic cells was quantified from the effluent at 24-h intervals, while average biofilm thickness and biofilm surface area were determined by confocal laser scanning microscopy and image analysis. Biofilm accumulation proceeded at the highest applied shear stress, while similar rates of planktonic cell detachment was maintained for biofilms of the same age subjected to the range of average shear rates. The conventional view of liquid-mediated shear leading to the passive erosion of single cells from the biofilm surface, disregards the active contribution of attached cell metabolism and growth to the observed detachment rates. As a complement to the conventional conceptual biofilm models, the existence of a biofilm surface-associated zone of planktonic cell proliferation is proposed to highlight the need to expand the traditional perception of biofilms as promoting microbial survival, to include the potential of biofilms to contribute to microbial proliferation.

The impact of culture medium on the development and physiology of biofilms of Pseudomonas fluorescens formed on polyurethane paint

Microbial biofilms cause the deterioration of polymeric coatings such as polyurethanes (PUs). In many cases, microbes have been shown to use the PU as a nutrient source. The interaction between biofilms and nutritive substrata is complex, since both the medium and the substratum can provide nutrients that affect biofilm formation and biodeterioration. Historically, studies of PU biodeterioration have monitored the planktonic cells in the medium surrounding the material, not the biofilm. This study monitored planktonic and biofilm cell counts, and biofilm morphology, in long-term growth experiments conducted with Pseudomonas fluorescens under different nutrient conditions. Nutrients affected planktonic and biofilm cell numbers differently, and neither was representative of the system as a whole. Microscopic examination of the biofilm revealed the presence of intracellular storage granules in biofilms grown in M9 but not yeast extract salts medium. These granules are indicative of nutrient limitation and/or entry into stationary phase, which may impact the biodegradative capability of the biofilm.

Glucose starvation-induced dispersal of Pseudomonas aeruginosa biofilms is cAMP and energy dependent

Carbon starvation has been shown to induce a massive dispersal event in biofilms of the opportunistic pathogen Pseudomonas aeruginosa; however, the molecular pathways controlling this dispersal response remain unknown. We quantified changes in the proteome of P. aeruginosa PAO1 biofilm and planktonic cells during glucose starvation by differential peptide-fingerprint mass-spectrometry (iTRAQ). In addition, we monitored dispersal photometrically, as a decrease in turbidity/opacity of biofilms pre-grown and starved in continuous flow-cells, in order to evaluate treatments (e.g. inhibitors CCCP, arsenate, chloramphenicol, L-serine hydroxamate) and key mutants altered in biofilm development and dispersal (e.g. nirS, vfr, bdlA, rpoS, lasRrhlR, Pf4-bacteriophage and cyaA). In wild-type biofilms, dispersal started within five minutes of glucose starvation, was maximal after 2 h, and up to 60% of the original biomass had dispersed after 24 h of starvation. The changes in protein synthesis were generally not more than two fold and indicated that more than 100 proteins belonging to various classes, including carbon and energy metabolism, stress adaptation, and motility, were differentially expressed. For the different treatments, only the proton-ionophore CCCP or arsenate, an inhibitor of ATP synthesis, prevented dispersal of the biofilms. For the different mutants tested, only cyaA, the synthase of the intracellular second messenger cAMP, failed to disperse; complementation of the cyaA mutation restored the wild-type phenotype. Hence, the pathway for carbon starvation-induced biofilm dispersal in P. aeruginosa PAO1 involves ATP production via direct ATP synthesis and proton-motive force dependent step(s) and is mediated through cAMP, which is likely to control the activity of proteins involved in remodeling biofilm cells in preparation for planktonic survival.

Should we stay or should we go: mechanisms and ecological consequences for biofilm dispersal

In most environments, bacteria reside primarily in biofilms, which are social consortia of cells that are embedded in an extracellular matrix and undergo developmental programmes resulting in a predictable biofilm 'life cycle'. Recent research on many different bacterial species has now shown that the final stage in this life cycle includes the production and release of differentiated dispersal cells. The formation of these cells and their eventual dispersal is initiated through diverse and remarkably sophisticated mechanisms, suggesting that there are strong evolutionary pressures for dispersal from an otherwise largely sessile biofilm. The evolutionary aspect of biofilm dispersal is now being explored through the integration of molecular microbiology with eukaryotic ecological and evolutionary theory, which provides a broad conceptual framework for the diversity of specific mechanisms underlying biofilm dispersal. Here, we review recent progress in this emerging field and suggest that the merging of detailed molecular mechanisms with ecological theory will significantly advance our understanding of biofilm biology and ecology.

Cell surface attachment structures contribute to biofilm formation and xylem colonization by Erwinia amylovora

Biofilm formation plays a critical role in the pathogenesis of Erwinia amylovora and the systemic invasion of plant hosts. The functional role of the exopolysaccharides amylovoran and levan in pathogenesis and biofilm formation has been evaluated. However, the role of biofilm formation, independent of exopolysaccharide production, in pathogenesis and movement within plants has not been studied previously. Evaluation of the role of attachment in E. amylovora biofilm formation and virulence was examined through the analysis of deletion mutants lacking genes encoding structures postulated to function in attachment to surfaces or in cellular aggregation. The genes and gene clusters studied were selected based on in silico analyses. Microscopic analyses and quantitative assays demonstrated that attachment structures such as fimbriae and pili are involved in the attachment of E. amylovora to surfaces and are necessary for the production of mature biofilms. A time course assay indicated that type I fimbriae function earlier in attachment, while type IV pilus structures appear to function later in attachment. Our results indicate that multiple attachment structures are needed for mature biofilm formation and full virulence and that biofilm formation facilitates entry and is necessary for the buildup of large populations of E. amylovora cells in xylem tissue.

Energy-dependent stability of Shewanella oneidensis MR-1 biofilms

Stability and resistance to dissolution are key features of microbial biofilms. How these macroscopic properties are determined by the physiological state of individual biofilm cells in their local physical-chemical and cellular environment is largely unknown. In order to obtain molecular and energetic insight into biofilm stability, we investigated whether maintenance of biofilm stability is an energy-dependent process and whether transcription and/or translation is required for biofilm dissolution. We found that in 12-hour-old Shewanella oneidensis MR-1 biofilms, a reduction in cellular ATP concentration, induced either by oxygen deprivation or by addition of the inhibitor of oxidative phosphorylation carbonyl cyanide m-chlorophenylhydrazone (CCCP), dinitrophenol (DNP), or CN(-), resulted in massive dissolution. In 60-hour-old biofilms, the extent of uncoupler-induced cell loss was strongly attenuated, indicating that the integrity of older biofilms is maintained by means other than those operating in younger biofilms. In experiments with 12-hour-old biofilms, the transcriptional and translational inhibitors rifampin, tetracycline, and erythromycin were found to be ineffective in preventing energy starvation-induced detachment, suggesting that neither transcription nor translation is required for this process. Biofilms of Vibrio cholerae were also induced to dissolve upon CCCP addition to an extent similar to that in S. oneidensis. However, Pseudomonas aeruginosa and P. putida biofilms remained insensitive to CCCP addition. Collectively, our data show that metabolic energy is directly or indirectly required for maintaining cell attachment, and this may represent a common but not ubiquitous mechanism for stability of microbial biofilms.

Flow cell hydrodynamics and their effects on E. coli biofilm formation under different nutrient conditions and turbulent flow

Biofilm formation is a major factor in the growth and spread of both desirable and undesirable bacteria as well as in fouling and corrosion. In order to simulate biofilm formation in industrial settings a flow cell system coupled to a recirculating tank was used to study the effect of a high (550 mg glucose l⁻¹) and a low (150 mg glucose l⁻¹) nutrient concentration on the relative growth of planktonic and attached biofilm cells of Escherichia coli JM109(DE3). Biofilms were obtained under turbulent flow (a Reynolds number of 6000) and the hydrodynamic conditions of the flow cell were simulated by using computational fluid dynamics. Under these conditions, the flow cell was subjected to wall shear stresses of 0.6 Pa and an average flow velocity of 0.4 m s⁻¹ was reached. The system was validated by studying flow development on the flow cell and the applicability of chemostat model assumptions. Full development of the flow was assessed by analysis of velocity profiles and by monitoring the maximum and average wall shear stresses. The validity of the chemostat model assumptions was performed through residence time analysis and identification of biofilm forming areas. These latter results were obtained through wall shear stress analysis of the system and also by assessment of the free energy of interaction between E. coli and the surfaces. The results show that when the system was fed with a high nutrient concentration, planktonic cell growth was favored. Additionally, the results confirm that biofilms adapt their architecture in order to cope with the hydrodynamic conditions and nutrient availability. These results suggest that until a certain thickness was reached nutrient availability dictated biofilm architecture but when that critical thickness was exceeded mechanical resistance to shear stress (ie biofilm cohesion) became more important.

Biofilm dispersal: mechanisms, clinical implications, and potential therapeutic uses

Like all sessile organisms, surface-attached communities of bacteria known as biofilms must release and disperse cells into the environment to colonize new sites. For many pathogenic bacteria, biofilm dispersal plays an important role in the transmission of bacteria from environmental reservoirs to human hosts, in horizontal and vertical cross-host transmission, and in the exacerbation and spread of infection within a host. The molecular mechanisms of bacterial biofilm dispersal are only beginning to be elucidated. Biofilm dispersal is a promising area of research that may lead to the development of novel agents that inhibit biofilm formation or promote biofilm cell detachment. Such agents may be useful for the prevention and treatment of biofilms in a variety of industrial and clinical settings. This review describes the current status of research on biofilm dispersal, with an emphasis on studies aimed to characterize dispersal mechanisms, and to identify environmental cues and inter- and intracellular signals that regulate the dispersal process. The clinical implications of biofilm dispersal and the potential therapeutic applications of some of the most recent findings will also be discussed.

Characterization of starvation-induced dispersion in Pseudomonas putida biofilms: genetic elements and molecular mechanisms

Pseudomonas putida OUS82 biofilm dispersal was previously shown to be dependent on the gene PP0164 (here designated lapG). Sequence and structural analysis has suggested that the LapG geneproduct belongs to a family of cysteine proteinases that function in the modification of bacterial surface proteins. We provide evidence that LapG is involved in P. putida OUS82 biofilm dispersal through modification of the outer membrane-associated protein LapA. While the P. putida lapG mutant formed more biofilm than the wild-type, P. putida lapA and P. putida lapAG mutants displayed decreased surface adhesion and were deficient in subsequent biofilm formation, suggesting that LapG affects LapA, and that the LapA protein functions both as a surface adhesin and as a biofilm matrix component. Lowering of the intracellular c-di-GMP level via induction of an EAL domain protein led to dispersal of P. putida wild-type biofilm but did not disperse P. putida lapG biofilm, indicating that LapG exerts its activity on LapA in response to a decrease in the intracellular c-di-GMP level. In addition, evidence is provided that associated to LapA a cellulase-degradable exopolysaccharide is part of the P. putida biofilm matrix.

Pseudomonas aeruginosa PAO1 preferentially grows as aggregates in liquid batch cultures and disperses upon starvation

In both natural and artificial environments, bacteria predominantly grow in biofilms, and bacteria often disperse from biofilms as freely suspended single-cells. In the present study, the formation and dispersal of planktonic cellular aggregates, or ‘suspended biofilms’, by Pseudomonas aeruginosa in liquid batch cultures were closely examined, and compared to biofilm formation on a matrix of polyester (PE) fibers as solid surface in batch cultures. Plankton samples were analyzed by laser-diffraction particle-size scanning (LDA) and microscopy of aggregates. Interestingly, LDA indicated that up to 90% of the total planktonic biomass consisted of cellular aggregates in the size range of 10–400 µm in diameter during the growth phase, as opposed to individual cells. In cultures with PE surfaces, P. aeruginosa preferred to grow in biofilms, as opposed to planktonicly. However, upon carbon, nitrogen or oxygen limitation, the planktonic aggregates and PE-attached biofilms dispersed into single cells, resulting in an increase in optical density (OD) independent of cellular growth. During growth, planktonic aggregates and PE-attached biofilms contained densely packed viable cells and extracellular DNA (eDNA), and starvation resulted in a loss of viable cells, and an increase in dead cells and eDNA. Furthermore, a release of metabolites and infective bacteriophage into the culture supernatant, and a marked decrease in intracellular concentration of the second messenger cyclic di-GMP, was observed in dispersing cultures. Thus, what traditionally has been described as planktonic, individual cell cultures of P. aeruginosa, are in fact suspended biofilms, and such aggregates have behaviors and responses (e.g. dispersal) similar to surface associated biofilms. In addition, we suggest that this planktonic biofilm model system can provide the basis for a detailed analysis of the synchronized biofilm life cycle of P. aeruginosa.

Influence of starvation time on formation and stability of aerobic granules in sequencing batch reactors

Three sequencing batch reactors, R1, R2 and R3, with a 1.5-h, 4-h and 8-h cycle time, respectively, were used to cultivate aerobic granules with the same synthetic wastewater containing 1000 mg l(-1) COD. As the initial COD concentrations in the cycles were the same, three different cycle times led to three different starvation times in repeated cycles of the three reactors. It was found that 63 cycles were needed to form granules with the longest starvation time in R3 while it took 256 cycles in R1 with the shortest starvation time. However, as far as the formation time was concerned, granules were formed on day 16 with 1.5-h cycle time while on day 21 with 8-h cycle time, which indicated that a shorter cycle time with a shorter starvation time speeded up the granulation. This was mainly due to the stronger hydraulic selection pressure at shorter cycle time. However, it was found that granules formed with cycle time of 1.5h were unstable. Fluffy granules with poor settling ability were observed in R1 in the 4th month, which led to the collapse of R1 after 160-day of operation. Granules in R2 and R3 showed good stability during the long-term operation. Therefore, a reasonable starvation time was necessary to maintain the long-term stability of aerobic granules.

In situ monitoring of the nascent Pseudomonas fluorescens biofilm response to variations in the dissolved organic carbon level in low-nutrient water by attenuated total reflectance-Fourier transform infrared spectroscopy

Drinking water quality management requires early warning tools which enable water supply companies to detect quickly and to forecast degradation of the microbial quality of drinking water during its transport throughout distribution systems. This study evaluated the feasibility of assessing, in real time, drinking water biostability by monitoring in situ the evolution of the attenuated total reflectance-Fourier transform infrared (ATR-FTIR) fingerprint of a nascent reference biofilm exposed to water being tested. For this purpose, the responses of nascent Pseudomonas fluorescens biofilms to variations in the dissolved organic carbon (DOC) level in tap water were monitored in situ and in real time by ATR-FTIR spectroscopy. Nascent P. fluorescens biofilms consisting of a monolayer of bacteria were formed on the germanium crystal of an ATR flowthrough cell by pumping bacterial suspensions in Luria-Bertani (LB) medium through the cell. Then they were exposed to a continuous flow of dechlorinated sterile tap water supplemented with appropriate amounts of sterile LB medium to obtain DOC concentrations ranging from 1.5 to 11.8 mg/liter. The time evolution of infrared bands related to proteins, polysaccharides, and nucleic acids clearly showed that changes in the DOC concentration resulted in changes in the nascent biofilm ATR-FTIR fingerprint within 2 h after exposure of the biofilm to the water being tested. The initial bacterial attachment, biofilm detachment, and regrowth kinetics determined from changes in the areas of bands associated with proteins and polysaccharides were directly dependent on the DOC level. Furthermore, they were consistent with bacterial adhesion or growth kinetic models and extracellular polymeric substance overproduction or starvation-dependent detachment mechanisms.

Effects of nutrients on biofilm formation and detachment of a Pseudomonas putida strain isolated from a paper machine

The aim of this study was to determine the effect of varying nutrient conditions on biofilm formation of a Pseudomonas putida strain isolated from a paper machine under controlled conditions. Biofilm accumulation, was investigated using a laminar flow cell reactor in a defined mineral medium. Our results indicate that increasing nutrient concentration (from 0.1 to 0.5 gl(-1) glucose, C/N=40, C/P=100) or phosphate concentration (from C/P=200 to C/P=100) increased the rate and extent of biofilm accumulation, however, higher nutrient (1 gl(-1) glucose, C/N=40, C/P=100) or phosphate (C/P=50) concentration reduced biofilm accumulation rate because of a higher detachment. The rate and extent of biofilm accumulation increased with nitrogen concentration (from C/N=90 to C/N=20). Detachment is a key parameter that influences biofilm accumulation since the early stage (2h) of colonisation and strongly depends on nutrient conditions. In practice, controlling nutrient levels may be interesting to reduce biofilm formation in the paper industry.

Characterization of a Pseudomonas putida rough variant evolved in a mixed-species biofilm with Acinetobacter sp. strain C6

Genetic differentiation by natural selection is readily observed among microbial populations, but a more comprehensive understanding of evolutionary forces, genetic causes, and resulting phenotypic advantages is not often sought. Recently, a surface population of Pseudomonas putida bacteria was shown to evolve rapidly by natural selection of better-adapted variants in a mixed-species biofilm consortium (S. K. Hansen, P. B. Rainey, J. A. Haagensen, and S. Molin, Nature 445:533-536, 2007). Adaptation was caused by mutations in a wapH homolog (PP4943) involved in core lipopolysaccharide biosynthesis. Here we investigate further the biofilm physiology and the phenotypic characteristics of the selected P. putida rough colony variants. The coexistence of the P. putida population in a mixed-species biofilm with Acinetobacter sp. strain C6 is dependent on the benzoate excreted from Acinetobacter during the catabolism of benzyl alcohol, the sole carbon source. Examination of biofilm development and the dynamics of the wild-type consortium revealed that the biofilm environment became oxygen limited, possibly with low oxygen concentrations around Acinetobacter microcolonies. In contrast to P. putida wild-type cells, which readily dispersed from the mixed-species biofilm in response to oxygen starvation, the rough variant cells displayed a nondispersal phenotype. However, in monospecies biofilms proliferating on benzoate, the rough variant (like the wild-type population) dispersed in response to oxygen starvation. A key factor explaining this conditional, nondispersal phenotype is likely to be the acquired ability of the rough variant to coaggregate specifically with Acinetobacter cells. We further show that the P. putida rough variant displayed enhanced production of a cellulose-like polymer as a consequence of the mutation in wapH. The resulting phenotypic characteristics of the P. putida rough variant explain its enhanced fitness and ability to form tight structural associations with Acinetobacter microcolonies.

Characterization of temporal protein production in Pseudomonas aeruginosa biofilms

Phenotypic and genetic evidence supporting the notion of biofilm formation as a developmental process is growing. In the present work, we provide additional support for this hypothesis by identifying the onset of accumulation of biofilm-stage specific proteins during Pseudomonas aeruginosa biofilm maturation and by tracking the abundance of these proteins in planktonic and three biofilm developmental stages. The onset of protein production was found to correlate with the progression of biofilms in developmental stages. Protein identification revealed that proteins with similar function grouped within similar protein abundance patterns. Metabolic and housekeeping proteins were found to group within a pattern separate from virulence, antibiotic resistance, and quorum-sensing-related proteins. The latter were produced in a progressive manner, indicating that attendant features that are characteristic of biofilms such as antibiotic resistance and virulence may be part of the biofilm developmental process. Mutations in genes for selected proteins from several protein production patterns were made, and the impact of these mutations on biofilm development was evaluated. The proteins cytochrome c oxidase, a probable chemotaxis transducer, a two-component response regulator, and MexH were produced only in mature and late-stage biofilms. Mutations in the genes encoding these proteins did not confer defects in growth, initial attachment, early biofilm formation, or twitching motility but were observed to arrest biofilm development at the stage of cell cluster formation we call the maturation-1 stage. The results indicated that expression of theses genes was required for the progression of biofilms into three-dimensional structures on abiotic surfaces and the completion of the biofilm developmental cycle. Reverse transcription-PCR analysis confirmed the detectable change in expression of the respective genes ccoO, PA4101, and PA4208. We propose a possible mechanism for the role of these biofilm-specific proteins in biofilm formation.

Characterization of starvation-induced dispersion in Pseudomonas putida biofilms

The biofilm lifestyle, where microbial cells are aggregated because of expression of cell-to-cell interconnecting compounds, is believed to be of paramount importance to microbes in the environment. Because microbes must be able to alternate between sessile and planktonic states, it is anticipated that they must be able to regulate their ability to form biofilm and to dissolve biofilm. We present an investigation of a biofilm dissolution process occurring in flow-chamber-grown Pseudomonas putida biofilms. Local starvation-induced biofilm dissolution appears to be an integrated part of P. putida biofilm development that causes characteristic structural rearrangements. Rapid global dissolution of entire P. putida biofilms was shown to occur in response to carbon starvation. Genetic analysis suggested that the adjacent P. putida genes PP0164 and PP0165 play a role in P. putida biofilm formation and dissolution. PP0164 encodes a putative periplasmic protein of previously unknown function, and PP0164 mutant bacteria are sticky, and unable to reduce their adhesiveness and dissolve their biofilm in response to carbon starvation. PP0165 encodes a putative transmembrane protein containing GGDEF and EAL domains, and PP0165 mutant bacteria are unable to increase their adhesiveness and form biofilm. We suggest that the PP0164 and PP0165 proteins are involved in the regulation of the adhesiveness of the bacteria; the PP0165 protein through c-di-GMP signalling, and the PP0164 protein as a transducer of the signal.

Induction of rapid detachment in Shewanella oneidensis MR-1 biofilms

Active detachment of cells from microbial biofilms is a critical yet poorly understood step in biofilm development. We discovered that detachment of cells from biofilms of Shewanella oneidensis MR-1 can be induced by arresting the medium flow in a hydrodynamic biofilm system. Induction of detachment was rapid, and substantial biofilm dispersal started as soon as 5 min after the stop of flow. We developed a confocal laser scanning microscopy-based assay to quantify detachment. The extent of biomass loss was found to be dependent on the time interval of flow stop and on the thickness of the biofilm. Up to 80% of the biomass of 16-h-old biofilms could be induced to detach. High-resolution microscopy studies revealed that detachment was associated with an overall loosening of the biofilm structure and a release of individual cells or small cell clusters. Swimming motility was not required for detachment. Although the loosening of cells from the biofilm structure was observed evenly throughout thin biofilms, the most pronounced detachment in thicker biofilms occurred in regions exposed to the flow of medium, suggesting a metabolic control of detachability. Deconvolution of the factors associated with the stop of medium flow revealed that a sudden decrease in oxygen tension is the predominant trigger for initiating detachment of individual cells. In contrast, carbon limitation did not trigger any substantial detachment, suggesting a physiological link between oxygen sensing or metabolism and detachment. In-frame deletions were introduced into genes encoding the known and putative global transcriptional regulators ArcA, CRP, and EtrA (FNR), which respond to changes in oxygen tension in S. oneidensis MR-1. Biofilms of null mutants in arcA and crp were severely impacted in the stop-of-flow-induced detachment response, suggesting a role for these genes in regulation of detachment. In contrast, an DeltaetrA mutant displayed a variable detachment phenotype. From this genetic evidence we conclude that detachment is a biologically controlled process and that a rapid change in oxygen concentration is a critical factor in detachment and, consequently, in dispersal of S. oneidensis cells from biofilms. Similar mechanisms might also operate in other bacteria.

Alternative sigma factor sigmaB is not essential for listeria monocytogenes surface attachment

Listeria monocytogenes is a foodborne pathogen frequently isolated from the food processing environment. Multiple lines of evidence suggested a possible role for the L. monocytogenes alternative transcription factor sigma B (sigmaB) in surface attachment and biofilm formation. Therefore, through plate count and microscopic techniques, the L. monocytogenes 10403S strain and an otherwise isogenic deltasigB strain were tested for attachment to stainless steel. Analysis of microscopic images revealed that after 72 h at 24 degrees C under static conditions the tested L. monocytogenes strains attached uniformly to surfaces as single cells. Both strains were capable of rapid attachment (i.e., numbers of attached cells were essentially the same after either 5 min or 24 h of incubation). Numbers of attached deltasigB cells were significantly lower than those of the wild-type strain after 48 and 72 h of incubation at 24 degrees C (P = 0.001). Similar numbers of the deltasigB strain attached to stainless steel regardless of temperature (24 or 37 degrees C); however, deltasigB cells attached at higher relative numbers in the presence of 6% NaCl after 48 and 72 h. Furthermore, in the presence of Pseudomonas fluorescens, similarly high numbers of wild-type and deltasigB cells attached to the surfaces, forming mixed biofilms. Our data suggest that sigmaB is not required for initial surface attachment of L. monocytogenes.

Characterization of nutrient-induced dispersion in Pseudomonas aeruginosa PAO1 biofilm

The processes associated with early events in biofilm formation have become a major research focus over the past several years. Events associated with dispersion of cells from late stage biofilms have, however, received little attention. We demonstrate here that dispersal of Pseudomonas aeruginosa PAO1 from biofilms is inducible by a sudden increase in carbon substrate availability. Most efficient at inducing dispersal were sudden increases in availability of succinate > glutamate > glucose that led to approximately 80% reductions in surface-associated biofilm biomass. Nutrient-induced biofilm dispersion was associated with increased expression of flagella (fliC) and correspondingly decreased expression of pilus (pilA) genes in dispersed cells. Changes in gene expression associated with dispersion of P. aeruginosa biofilms were studied by using DNA microarray technology. Results corroborated proteomic data that showed gene expression to be markedly different between biofilms and newly dispersed cells. Gene families that were upregulated in dispersed cells included those for flagellar and ribosomal proteins, kinases, and phage PF1. Within the biofilm, genes encoding a number of denitrification pathways and pilus biosynthesis were also upregulated. Interestingly, nutrient-induced dispersion was associated with an increase in the number of Ser/Thr-phosphorylated proteins within the newly dispersed cells, and inhibition of dephosphorylation reduced the extent of nutrient-induced dispersion. This study is the first to demonstrate that dispersal of P. aeruginosa from biofilms can be induced by the addition of simple carbon sources. This study is also the first to demonstrate that dispersal of P. aeruginosa correlates with a specific dispersal phenotype.

Removal of fish pathogenic bacteria in biological sand filters

Documentation is required to evaluate the use of infiltration systems as an alternative method for removal of fish pathogenic bacteria in wastewater from fish-farms. This study was performed to investigate the removal of bacterial fish pathogens in biological sand filters. A second aim of the study was to evaluate the bacteria used in the study in order to find a suitable model organism for future experiments. Low-strength wastewater from an inland freshwater salmonid farm was intermittently loaded (70 mm/day in 24 doses) to filter columns containing either fine sand (d(10)=0.25) or coarse sand (d(10)=0.86). After a wastewater loading period of 10 weeks, separate sand columns were seeded with Yersinia ruckeri, Pseudomonas fluorescens, Aeromonas hydrophila and Aeromonas salmonicida subsp. salmonicida, respectively, for a period of 30 days. All the bacteria showed the same removal performance during the experiment, with a significantly lower removal in the beginning of the experiment (day 1-7) compared to mid- and late-phase (day 12-30). In mid- and late-phase the removal stabilized at a high level (>99.9%) for all the bacteria. The hydrophobic cell surface properties of the Aeromonads were higher than Ps. fluorescens and Y. ruckeri. This can possibly explain the significantly higher (P<0.05) removal efficiencies seen for A. hydrophila and A. salmonicida subsp. salmonicida compared to Y. ruckeri and Ps. fluorescens. Results were promising with regard to the use of low-cost infiltration systems as an alternative disinfection method for fish-farm wastewater. Following the criteria for a suitable model organism (removal efficiency, detection in filter effluent and die-off in storage tanks), Y. ruckeri was found to be a feasible model organism for use in future experiments.

Novel method for the proteomic investigation of a dairy-associated Bacillus cereus biofilm

The biofilm proteome of a dairy-associated Bacillus cereus strain (B. cereus 5) was investigated. Biofilm biomass of sufficient concentration for 2D-PAGE was obtained by growing the culture in the presence of glass wool. B. cereus 5 readily attached to the glass wool and biofilms formed within 18 h. The biofilm proteome of whole-cell proteins revealed that 10 proteins were synthesized as a result of surface attachment of which four were unique to the biofilm profile. Seven proteins appeared to be absent in the biofilm profile. The altered proteomes indicated that changes took place in the regulation of protein expression when B. cereus 5 cells attached to surfaces.

A technique To quantify the population size and composition of the biofilm component in communities of bacteria in the phyllosphere

The presence of microbial biofilms in the phyllosphere of terrestrial plants has recently been demonstrated, but few techniques to study biofilms associated with living plant tissues are available. Here we report a technique to estimate the proportion of the bacterial population on leaves that is assembled in biofilms and to quantitatively isolate bacteria from the biofilm and nonbiofilm (solitary) components of phyllosphere microbial communities. This technique is based on removal of bacteria from leaves by gentle washing, separation of biofilm and solitary bacteria by filtration, and disintegration of biofilms by ultrasonication. The filters used for this technique were evaluated for their nonspecific retention rates of solitary bacteria and for the efficiency of filtration for different concentrations of solitary bacteria in the presence of biofilms and other particles. The lethality and efficiency of disintegration of the sonication conditions used here were also evaluated. Isolation and quantification of bacteria by this technique is based on use of culture media. However, oligonucleotide probes, sera, or epifluorescent stains could also be used for direct characterization of the biofilm and solitary bacteria in the suspensions generated by this technique. Preliminary results from estimates of biofilm abundance in phyllosphere communities show that bacteria in biofilms constitute between about 10 and 40% of the total bacterial population on broad-leaf endive and parsley leaves.

Nutritional influences on biofilm development

The amounts and types of nutrients in the environment influence the development and final bacterial and chemical composition of biofilms. In oligotrophic environments, organisms respond to nutrient stress by alterations in their cell morphology and cell surfaces, which enhance adherence. Little is known of the responses to stress by bacteria in the animal oral cavity. The environment in the oral cavity is less extreme, and saliva provides a constant source of nutrients. Catabolic cooperation among oral bacteria allow carbon and nitrogen from salivary glycoproteins to be utilized. Modification of growth environments of oral bacteria can influence their cell surfaces and adhesion. Studies in experimental animals have shown that feeding either glucose or sucrose diets or fasting has little effect on the initial stages of development of oral biofilms. However, diet can influence the proportions of different bacterial species later in biofilm development. Studies of competition among populations in communities of oral bacteria in vitro and in vivo have shown the significance of carbon limitation and excess and changes in environmental pH. Relatively few studies have been made of the role of a nitrogen metabolism in bacterial competition in biofilms. In keeping with biofilms in nature, oral biofilms provide a sequestered habitat, where organisms are protected from removal by saliva and where interactions among cells generate a biofilm environment, distinct from that of saliva. Oral biofilms are an essential component in the etiologies of caries and periodontal disease, and understanding the biology of oral biofilms has aided and will continue to aid in the prevention and treatment of these diseases.

Biofilm formation by the enterobacteriaceae: a comparison between salmonella enteritidis, Escherichia coli and a nitrogen-fixing strain of Klebsiella pneumoniae

A simple laboratory reactor, which simulates biofilm formation in pipes, was used to compare biofilm formation by three members of the Enterobacteriaceae, namely, an environmental, nitrogen-fixing strain of Klebsiella pneumoniae, a pathogen, Salmonella enteritidis, and a faecal indicator, Escherichia coli. All three attached to CVCP pipe surfaces in the reactor and formed substantial biofilm populations of over a million bacteria cm-2 within 24 h. These populations increased by approximately 10-fold over the next 48 h. Estimates of the numbers of metabolically active cells and the ratios of viable to direct counts showed that Kl. pneumoniae formed the densest and most metabolically active biofilms, followed by Salm. enteritidis and E. coli, respectively. Nitrogen fixation and polysaccharide production (EPS) by Kl. pneumoniae occurred only in mature biofilms and were of no selective advantage in the initiation of biofilms. Despite producing more EPS the rate of attachment of Salm. enteritidis was lower than for Kl. pneumoniae.

Transport of bacteria through geologic media

A review of the current literature on transport of bacteria through geologic media is presented. The review addresses the major controls on bacterial transport. These controls include the nature of the substratum, the solute, and the bacterial cell. Most knowledge on the transport of bacteria through geologic media has been gained from column studies. There is need for some standardization of approaches, particularly with regard to data collection and controls on factors such as ionic strength and flow velocity. Other systems including glass micromodels have been used in conjunction with microscopy and scanning confocal laser microscopy to examine the controls on transport at the pore scale rather than porous medium scale of column studies. Many inconsistencies exist regarding the effect of the numerous variables that impact bacterial sorption in porous media. These variables include the nature of the substratum (i.e., the presence or absence of coatings), chemical composition of the solute (particularly ionic strength), system hydrodynamics, and bacterial variables such as size, shape, hydrophobicity, and electrostatic charge. Mathematical models based on the advective–dispersion equation have been developed to simulate bacterial transport. Within specific limits, these models can approximate most aspects of bacterial transport; however, they neglect parameters such as growth and behavior of bacteria. There is a need for theoretical development, extensive laboratory investigation, and model development before the goal of prediction of bacterial transport at field scale may be realized.Key words: sorption, advection, dispersion, models, facilitated transport.

Influence of culture conditions on biofilm formation by Escherichia coli O157:H7

Biofilms of Escherichia coli O157:H7 were developed on stainless steel chips in trypticase soy broth (TSB), 1/5 dilution of TSB, 0.1% Bacto peptone (BP) and a minimal salts medium (MSM) supplemented with 0.04% of one of the following carbon sources: glucose, glycerol, lactose, mannose, succinic acid, sodium pyruvate or lactic acid. It was found that biofilms developed faster and a higher number of adherent cells (ca. 10(6) CFU/cm2) were recovered when the organisms were grown in the low nutrient media. Regardless of the carbon source, biofilms developed in MSM consisted of shorter bacterial cells and thicker extracellular matrix (ECM), with glucose as the best substrate for stable biofilm formation. Fewer bacteria in initial attachment, non-hydrophobicity of bacterial cells, lack of ECM formation and easy detachment of the biofilm bacteria may contribute to poor biofilm formation in TSB. ECM is probably important for the stability of biofilms; however, at 10 degrees C and under anaerobic conditions, ECM seems to be unnecessary.

Activity of synchronized cells of a steady-state biofilm recirculated reactor during xenobiotic biodegradation

The maintenance of a steady-state biofilm in a continuous-flow fixed-bed reactor, as a consequence of the reproduction-detachment of cells (an interfacial cell physiology phenomenon of steady-state biofilm) during the biodegradation of 2,4,6-trichlorophenol by Pseudomonas cells, was determined. After cell adhesion on an open-pore glass support, the biofilm was formed in a packed-bed recirculated reactor. After the steady-state biofilm was reached, the mechanisms of the interfacial cell detachment (at the biofilm-liquid interface) were determined. It was established that (i) the hydrophobicity of immobilized sessile cells (parent cells) increased (from 50 to 80%) as the dilution rate increased, while the hydrophobicity of detached suspended cells (daughter cells) remained constant (about 45%); and (ii) the immediately detached suspended cells showed a synchronized growth in about three generations. These results indicate that (i) the immobilized sessile and suspended detached cells grew synchronically at the end and at the beginning of the cell cycle, respectively; and (ii) the hydrophobicity difference of immobilized sessile and suspended detached cells permitted the cells detachment. Therefore, it is probable that independent of shear stress (due to recirculated flow), the synchronized growth and hydrophobicity of cells (which vary during the cell cycle) are the main factors permitting the maintenance of a steady-state xenobiotic-degrading biofilm reactor (in which the overall accumulation of biofilm is determined by the average growth rate of the biofilm cells minus the rate of detachment of cells from the biofilm).