Technological applications of chlorophyll a fluorescence for the assessment of environmental pollutants

Impact of Arieş River Contaminants on Algae and Plants

The Arieş River (Western Romania) represents one of the most important affluents of the Mureş River, with great significance in the Mureş Tisza basin. The environmental quality of the Arieş basin is significantly affected by both historic mining activities and contemporary impacts. Thus, an evaluation of the effects of the main contaminants found in water (organochlorine pesticides-OCPs, monocyclic aromatic hydrocarbons-MAHs, polycyclic aromatic hydrocarbons-PAHs, and metals) on cyanobacteria and plants was performed. Among OCPs, hexachlorocyclohexane isomers, dichlorodiphenyltrichloroethane, and derivatives were detected in plants while admissible concentrations were detected in water. Among MAHs, high levels of benzene were detected both in water and in plants. The levels of PAHs exceeded the allowable values in all samples. Increased concentrations of metals in water were found only at Baia de Arieş, but in plants, all metal concentrations were high. The pH, nitrates, nitrites, and phosphates, as well as metals, pesticides, and aromatic hydrocarbons, influenced the physiological characteristics of algae, test plants, and aquatic plants exposed to various compounds dissolved in water. Considering that the Arieş River basin is the site of intense past mining activities, these data provide information about the impact on water quality as a consequence of pollution events.

Differential physiological response of marine and freshwater microalgae to polystyrene microplastics

Effects of microplastics on microalgae have not been compared from different habitat. To answer this question, three marine microalgae species (Chlorella marined, Nannochloropsis oculate, and Phaeodactylum tricornutum) and two freshwater species (Chlorella vulgaris and Tetradesmus obliquus) were selected and exposed to the environment relevant concentrations of polystyrene microplastics. The results indicated that microplastics have a significant concentration effect on the growth of microalgae. The attachment of microalgae to microplastics surface and the aggregation of microalgae with each other were observed. Under exposure of microplastics, the photosynthesis of microalgae was inhibited while the antioxidant system was activated, indicating that microplastics had a negative impact on microalgae. At the end of exposure, the oxidative stress status caused by microplastics in marine microalgae were alleviated, but the antioxidant system of freshwater microalgae was still at high levels, indicating a stress response. In addition, integrated biomarker response (IBR) indicated that the effects of microplastics on freshwater microalgae were severer than marine microalgae, which might relate to their differences in removing reactive oxygen species (ROS) effectively and membrane structure. Our study provides a reliable data for understanding the complex effects of microplastics on microalgae, and especially for comparing the differential effects of microplastics among different microalgae.

Potential Role of Low-Molecular-Weight Dioxolanes as Adjuvants for Glyphosate-Based Herbicides Using Photosystem II as an Early Post-Treatment Determinant

Pesticide use cannot be completely abandoned in modern agriculture. Among agrochemicals, glyphosate is one of the most popular and, at the same time, most divisive herbicide. Since the chemicalization of agriculture is detrimental, various attempts are being made to reduce it. Adjuvants-substances that increase the efficiency of foliar application-can be used to reduce the amount of herbicides used. We propose low-molecular-weight dioxolanes as adjuvants for herbicides. These compounds quickly convert to carbon dioxide and water and do not harm plants. The aim of this study was to evaluate the efficacy of RoundUp^® 360 Plus supported by three potential adjuvants: 2,2-dimethyl-1,3-dioxolane (DMD), 2,2,4-trimethyl-1,3-dioxolane (TMD), and (2,2-dimethyl-1,3-dioxan-4-yl)methanol (DDM), on a common weed species Chenopodium album L., under greenhouse conditions. Chlorophyll a fluorescence parameters and analysis of the polyphasic fluorescence (OJIP) curve, which examines changes in the photochemical efficiency of photosystem II, were used to measure plant sensitivity to glyphosate stress and verified the efficacy achieved by tested formulations. The effective dose (ED) values obtained showed that the weed tested was sensitive to reduced doses of glyphosate, with 720 mg/L needed to achieve 100% effectiveness. Compared to the glyphosate assisted with DMD, TMD, and DDM, ED was reduced by 40%, 50%, and 40%, respectively. The application of all dioxolanes at a concentration equal to 1 vol.% significantly enhanced the herbicide's effect. Our study showed that for C. album there was a correlation between the change in OJIP curve kinetics and the applied dose of glyphosate. By analyzing the discrepancies in the curves, it is possible to show the effect of different herbicide formulations with or without dioxolanes at an early stage of its action, thus minimizing the time for testing new substances as adjuvants.

Rajput V, Kumar Singh R, Guo Y, Kosolapov A, Usova E, Varduny T, Chalenko E, Yadronova O, Dmitriev P, Zaruba T. Chlorophyll fluorometry in evaluating photosynthetic performance: key limitations, possibilities, perspectives and alternatives

Non-destructive methods for the assessment of photosynthetic parameters of plants are widely applied to evaluate rapidly the photosynthetic performance, plant health, and shifts in plant productivity induced by environmental and cultivation conditions. Most of these methods are based on measurements of chlorophyll fluorescence kinetics, particularly on pulse modulation (PAM) fluorometry. In this paper, fluorescence methods are critically discussed in regard to some their possibilities and limitations inherent to vascular plants and microalgae. Attention is paid to the potential errors related to the underestimation of thylakoidal cyclic electron transport and anoxygenic photosynthesis. PAM-methods are also observed considering the color-addressed measurements. Photoacoustic methods are discussed as an alternative and supplement to fluorometry. Novel Fourier modifications of PAM-fluorometry and photoacoustics are noted as tools allowing simultaneous application of a dual or multi frequency measuring light for one sample.

Rapid and Sensitive Detection of Water Toxicity Based on Photosynthetic Inhibition Effect

To achieve rapid and sensitive detection of the toxicity of pollutants in the aquatic environment, a photosynthetic inhibition method with microalgae as the test organism and photosynthetic fluorescence parameters as the test endpoint was proposed. In this study, eight environmental pollutants were selected to act on the tested organism, Chlorella pyrenoidosa, including herbicides (diuron, atrazine), fungicides (fuberidazole), organic chemical raw materials (phenanthrene, phenol, p-benzoquinone), disinfectants (trichloroacetonitrile uric acid), and disinfection by-products (trichloroacetonitrile). The results showed that, in addition to specific PSII inhibitors (diuretic and atrazine), other types of pollutants could also quickly affect the photosynthetic system. The photosynthetic fluorescence parameters (Fv/Fm, Yield, α, and rP) could be used to detect the effects of pollutants on the photosynthetic system. Although the decay rate of the photosynthetic fluorescence parameters corresponding to the different pollutants was different, 1 h could be used as an appropriate toxicity exposure time. Moreover, the lowest respondent concentrations of photosynthetic fluorescence parameters to diuron, atrazine, fuberidazole, phenanthrene, P-benzoquinone, phenol, trichloroacetonitrile uric acid, and trichloroacetonitrile were 2 μg·L⁻¹, 5 μg·L⁻¹, 0.05 mg·L⁻¹, 2 μg·L⁻¹, 1.0 mg·L⁻¹, 0.4 g·L⁻¹, 0.1 mg·L⁻¹, and 2.0 mg·L⁻¹, respectively. Finally, diuron, atrazine, fuberidazole, and phenanthrene were selected for a comparison of their photosynthetic inhibition and growth inhibition. The results suggested that photosynthetic inhibition could overcome the time dependence of growth inhibition and shorten the toxic exposure time from more than 24 h to less than 1 h, or even a few minutes, while, the sensitivity of the toxicity test was not weakened. This study indicates that the photosynthetic inhibition method could be used for rapid detection of the toxicity of water pollutants and that algae fluorescence provides convenient access to toxicity data.

Whole cell microalgal-cyanobacterial array biosensor for monitoring Cd, Cr and Zn in aquatic systems

Bioavailable content of metals in aquatic systems has become critical in assessing the toxic effect of metals accumulating in the environment. Considering the need for rapid measurements, an optical microalgal-cyanobacterial array biosensor was developed using two strains of microalgae, Mesotaenium sp. and a strain of cyanobacteria Synechococcus sp. to detect Cd²⁺, Cr⁶⁺ and Zn²⁺ in aquatic systems. Microalgal and cyanobacterial cells were immobilized in a 96-well microplate using sol-gel method using silica. Optimum operational conditions for the biosensor array such as exposure time, storage stability, pH, and multiple metal effect were tested. A 10 min exposure time yielded optimum fluorescence values. Metal toxicity increased with decreasing pH, resulting in low relative fluorescence (%) and decreased with increasing pH, resulting in higher relative fluorescence (%). The optimum storage time for biosensor strains were 4 weeks for microalgal cultures and 8 weeks for cyanobacterial culture, at 4 °C storage temperature. The metal mixtures showed less effect on the inhibition of relative fluorescence (%) of microalgal/cyanobacterial cultures, displaying an antagonistic behavior among the metals tested. As a single unit, this photosynthetic array biosensor will be a valuable tool in detecting multi-metals in aquatic systems.

Leaf application of 24-epibrassinolide mitigates cadmium toxicity in young Eucalyptus urophylla plants by modulating leaf anatomy and gas exchange

Cadmium (Cd2+) soil pollution is a global environmental problem caused by the high toxicity of Cd. 24-Epibrassinolide (EBR) is a biodegradable plant steroid involved in response modulation to biotic and abiotic stresses. The aim of this study was to evaluate if the leaf-application of EBR improves the gas exchange and possible repercussions on leaf anatomy in young Eucalyptus urophylla plants exposed to Cd toxicity. The experiment involved six treatments, which included three Cd concentrations (0, 450, and 900 μM) and two EBR concentrations (0 and 100 nM, described as - EBR and + EBR, respectively). Plants exposed to Cd toxicity suffered decreases in leaf anatomical and gas exchange parameters. However, the plants treated with EBR + 900 μM Cd showed an increase of 46%, 40%, and 54% in the net photosynthetic rate, water-use efficiency, and instantaneous carboxylation efficiency, respectively. The EBR application-induced improvements in gas exchange parameters, causing beneficial effects on the photosynthetic apparatus, mainly the effective quantum yield of photosystem II (PSII) photochemistry and electron transport rate. Furthermore, this steroid mitigated the effect of Cd toxicity on leaf anatomical variables, more specifically palisade and spongy parenchyma, which are intrinsically related to stomatal density, and stimulated the net photosynthetic rate of plants.

Binding Properties of Photosynthetic Herbicides with the QB Site of the D1 Protein in Plant Photosystem II: A Combined Functional and Molecular Docking Study

Photosystem II (PSII) is a multi-subunit enzymatic complex embedded in the thylakoid membranes responsible for the primary photosynthetic reactions vital for plants. Many herbicides used for weed control inhibit PSII by interfering with the photosynthetic electron transport at the level of the D1 protein, through competition with the native plastoquinone for the Q_B site. Molecular details of the interaction of these herbicides in the D1 Q_B site remain to be elucidated in plants. Here, we investigated the inhibitory effect on plant PSII of the PSII-inhibiting herbicides diuron, metobromuron, bentazon, terbuthylazine and metribuzin. We combined analysis of OJIP chlorophyll fluorescence kinetics and PSII activity assays performed on thylakoid membranes isolated from pea plants with molecular docking using the high-resolution PSII structure recently solved from the same plant. Both approaches showed for terbuthylazine, metribuzin and diuron the highest affinity for the D1 Q_B site, with the latter two molecules forming hydrogen bonds with His215. Conversely, they revealed for bentazon the lowest PSII inhibitory effect accompanied by a general lack of specificity for the Q_B site and for metobromuron an intermediate behavior. These results represent valuable information for future design of more selective herbicides with enhanced Q_B binding affinities to be effective in reduced amounts.

Assessment of cytotoxicity biomarkers on the microalga Chlamydomonas reinhardtii exposed to emerging and priority pollutants

Contamination of aquatic ecosystems linked to anthropogenic activity is currently a major concern; therefore, ecotoxicological studies are needed to assess its effect on organisms. The main objective of this study was to investigate the effects of different pollutants on microalgae in search of sensitive biomarkers that can promote a common cytotoxic response regardless of the contaminant. Cultures of the freshwater microalga Chlamydomonas reinhardtii were exposed for 24 h to four chemicals, three emerging pollutants (benzophenone-3, bisphenol A and oxytetracycline) and one priority substance (atrazine). A cytometric panel was carried out to assess toxicity biomarkers including cellular growth, inherent cell properties, viability, vitality, cytoplasmic membrane potential and ROS levels. Lipid peroxidation, photosynthetic efficiency and transcriptional responses of photosynthesis- and oxidative stress-related genes using RT-qPCR were also studied. Some toxicity responses showed a similar pattern; a decrease in growth rate, vitality and photosynthetic efficiency and an increase in autofluorescence and in the number of cells with depolarised cytoplasmic membrane and were found for all chemicals tested. However, ATZ and OTC provoked a decrease in cell size, whereas BP-3 and BPA caused an increase in cell size, intracellular complexity and ROS levels and a decrease in cell viability. Assayed pollutants generally promoted an overexpression of genes related to cellular antioxidant defence system and a subexpression of photosynthesis-related genes. In addition to the traditional growth endpoint, cell vitality, autofluorescence and gene expression of catalase, glutathione peroxidase and Fe-superoxide dismutase were significantly affected for all chemicals tested, showing a common cytotoxic response. Among the tested substances, BP-3 provoked the strongest cytotoxic alterations on this microalga, pointing out that some emerging contaminants could be more harmful to organisms than priority pollutants.

Porphyrin Derivative Nanoformulations for Therapy and Antiparasitic Agents

Porphyrins and analogous macrocycles exhibit interesting photochemical, catalytic, and luminescence properties demonstrating high potential in the treatment of several diseases. Among them can be highlighted the possibility of application in photodynamic therapy and antimicrobial/antiparasitic PDT, for example, of malaria parasite. However, the low efficiency generally associated with their low solubility in water and bioavailability have precluded biomedical applications. Nanotechnology can provide efficient strategies to enhance bioavailability and incorporate targeted delivery properties to conventional pharmaceuticals, enhancing the effectiveness and reducing the toxicity, thus improving the adhesion to the treatment. In this way, those limitations can be overcome by using two main strategies: (1) Incorporation of hydrophilic substituents into the macrocycle ring while controlling the interaction with biological systems and (2) by including them in nanocarriers and delivery nanosystems. This review will focus on antiparasitic drugs based on porphyrin derivatives developed according to these two strategies, considering their vast and increasing applications befitting the multiple roles of these compounds in nature.

Effects of traditional Chinese medicine residue on plant growth and soil properties: a case study with maize (Zea mays L.)

Traditional Chinese medicine residue (TCMR) is the solid substances remaining after the extraction of pharmaceutical ingredients from medicinal plant materials, which include abundant soil nutrients. However, TCMR is nearly lost as domestic garbage, which not only occupies a large amount of land but also leads to the waste of resource, as well as causing the eco-environment potential pollution. Therefore, we implemented this study to assess whether TCMR could be used as an organic fertilizer in agricultural practices for realizing waste resource utilization, improving soil fertility, and enhancing plant growth. The results showed that (1) application of TCMR could improve soil fertility, particularly in enhancing the soil contents of SOM, TN, NaOH-N, NaHCO₃-P, and HNO₃-K; (2) the higher application ratios of TCMR (0.8-1.0%) that increased the soil EC values would cause the risk of soil secondary salinization; (3) the lower application ratios of TCMR (0.2-0.6%) has a better positive effect on improved the maize seedlings' physiological parameters and photosynthetic performance than the higher application ratios; (4) although application of TCMR lead to the heavy metal (Cr, Pb, Cd, As, and Hg) content increased in soil, there was no ecology risk under below 0.8% application ratio, compared with the China soil risk control standards, geo-accumulation index (I_geo), and pollution load index (PLI). Thus, TCMR could potentially be used as an organic fertilizer in agricultural practices. This approach is an effective strategy not only for achieving TCMR disposal but also for realizing waste resource utilization, as well as for improving soil fertility and plant growth.

24-Epibrassinolide application in plants: An implication for improving drought stress tolerance in plants

Drought stress is one of most dramatic abiotic stresses, reduces crop yield significantly. Application of hormones proved as an effective drought stress ameliorating approach. 24-Epibrassinolide (EBL), an active by-product from brassinolide biosynthesis increases drought stress tolerance in plants significantly. EBL application enhances plant growth and development under drought stress by acting as signalling compound in different physiological processes. This article discussed potential role of 24-epibrassinolide application and drought tolerance in plants. Briefly, EBL sustains or improves plant growth and yield by enhancing carbon assimilation rate, maintaining a balance between ROS and antioxidants and also plays important role in solute accumulation and water relations. Furthermore, we also compared different EBL application methods and concluded that seed priming and foliar application are more productive as compared with root application method. In conclusion, EBL is very impressive phyto-hormone, which can ameliorate drought stress induced detrimental effects in plants.

Toxicity assessment of molybdenum slag as a mineral fertilizer: A case study with pakchoi (Brassica chinensis L.)

Large quantities of molybdenum (Mo) slag are generated as a by-product during mining and smelting, which not only occupy huge stretches of arable land and natural habitats but also threaten the local ecosystem and environment. How to recycle this Mo slag is becoming an urgent issue. Here, we reported the toxicity assessment of Mo slag as a mineral fertilizer for slag recycling in agricultural practices. The results showed the following: (1) Lower rates of slag (1.0%, 2.5%, and 5.0%) fertilization, especially 5.0% slag, increased the activities of antioxidant enzymes (superoxide dismutase, catalase, and peroxidase), the contents of chlorophyll, and both the maximum quantum yield and quantum efficiency of photosystem II; decreased the content of malondialdehyde and the non-photochemical quenching of photosystem II; and eventually increased the height, leaf area, and biomass of pakchoi seedlings; (2) Higher rates (7.5% and 10.0%) of Mo slag application resulted in a reduction in the aforementioned physiological and morphological parameters (except for peroxidase activity) of pakchoi seedlings; and (3) Although fertilization with 5.0% slag increased the accumulation of the non-essential elements arsenic (As), lead (Pb), and cadmium (Cd) in pakchoi seedlings, their contents were still lower than the maximum levels of the Codex Alimentarius Commission, European Union, and standards of China. From the perspectives of plant nutrition and food safety, our results showed that Mo slag fertilization at rates lower than 5.0% can be applied as a mineral fertilizer for pakchoi grown on calcareous soils.

Chlorine toxicity to Navicula pelliculosa and Achnanthes spp. in a flow-through system: The use of immobilised microalgae and variable chlorophyll fluorescence

Chlorination is a widely used antifouling method for freshwater and marine applications. Chlorine added to seawater reacts to form oxidants that are toxic to biofouling organisms. Further, the oxidants that result are short-lived, but may nevertheless affect non-target species in waterbodies receiving the antifouling effluent. This study evaluated the toxicity of chlorinated seawater (e.g. following sodium hypochlorite addition) on two different species of marine benthic diatoms (Achnanthes spp., and Navicula pelliculosa), which are representative of microphytobenthos communities - an important component in coastal habitats that may be exposed to chlorinated seawater. To evaluate the growth inhibition over a 72 h period, algae were immobilised in alginate beads and exposed to different levels of chlorination in a flow through system. Growth rates and physiological condition of the microalgae were evaluated using a Fast Repetition Rate fluorometer (FRRf). To determine whether alginate influenced the sensitivity of algal response, studies were also conducted in a static test system (without renewal of test solutions) using both free cells and immobilised cells with initial chlorine added to achieve a similar range of concentrations as those used in the flow-through study. Within the first hour of the exposure period there was an indication that, for both species, the free algal cells in the static system were more sensitive to exposure to chlorinated seawater than were alginate-immobilised cells in the flow through system. Immobilised cells in a static system with a single addition of chlorine were also less sensitive to chlorination than free algal cells. However, for periods of 24 h or more due to decay of TRO in the static system the exposure of immobilised algae in the flow through system had a greater impact and hence lower effect concentrations. For the flow-through studies Achnanthes spp. was the most sensitive after 72 h exposure with a potential no effect concentration EC₁₀ value of 0.02 mg l^-1 as Cl₂ equivalents expressed as total residual oxidants (TRO) compared 0.04 mg l^-1 TRO for N. pelliculosa. Immobilisation of algal cells in alginate was found to be an effective means of determining the impact of chlorination and is likely to be effective for other non-persistent substances. Based on the data produced, the extent and significance of ecological effects of chlorination upon algal species typical of microphytobenthos are likely to be limited providing discharges comply with a maximum allowable concentration of 0.01 mg l^-1 TRO at the edge of an agreed mixing zone.

Probing Contaminant-Induced Alterations in Chlorophyll Fluorescence by AC-Dielectrophoresis-Based 2D-Algal Array

The investigation of contaminant impact on algae requires rapid and reliable cell collection and optical detection. The capability of alternative current (AC) dielectrophoresis (DEP) collection of whole cell arrays with combined fluorescence microscopy detection to follow the alterations of chlorophyll fluorescence during environmental contaminant exposure was explored. The application of an AC-field of 100 V cm^-1, 100 Hz for 30 min to capture and immobilize the cells of green alga Chlamydomonas reinhardtii in two-dimensional (2D) arrays does not induce changes in chlorophyll fluorescence. The results demonstrate that DEP-based 2D-arrays allow non-invasive detection of chlorophyll fluorescence change upon exposure to high concentrations of copper oxide nanoparticles and ionic copper. These results were in agreement with data obtained by flow cytometry used as a comparative method. The tool was also applied to follow the effect of a number of ubiquitous contaminants such as inorganic mercury, methylmercury, and diuron. However, a statistically significant short-term effect was observed only for mercury. Overall, DEP-based 2D-arrays of algal cells with fluorescence detection appear to be suitable for stain-free probing the effects on the photosynthetic microorganisms in highly polluted environment.

Sensing photosynthetic herbicides in an electrochemical flow cell

Specific inhibitory reactions of herbicides with photosynthetic reaction centers bound to working electrodes were monitored in a conventional electrochemical cell and a newly designed microfluidic electrochemical flow cell. In both cases, the bacterial reaction centers were bound to a transparent conductive metal oxide, indium-tin-oxide, electrode through carbon nanotubes. In the conventional cell, photocurrent densities of up to a few μA/cm² could be measured routinely. The photocurrent could be blocked by the photosynthetic inhibitor terbutryn (I ₅₀ = 0.38 ± 0.14 μM) and o-phenanthroline (I ₅₀ = 63.9 ± 12.2 μM). The microfluidic flow cell device enabled us to reduce the sample volume and to simplify the electrode arrangement. The useful area of the electrodes remained the same (ca. 2 cm²), similar to the classical electrochemical cell; however, the size of the cell was reduced considerably. The microfluidic flow control enabled us monitoring in real time the binding/unbinding of the inhibitor and cofactor molecules at the secondary quinone site.

Culture density influence on the photosynthetic efficiency of microalgae growing under different spectral compositions of light

A density in algal suspension causes a significant change in the intensity and spectral composition of light reaching individual cells. Measurements of chlorophyll fluorescence allow us to observe any general changes in the bioenergetic status of photosynthesis. The aim of the study was to determine the effect of cultivation density on the PSII photochemical efficiency of three species of algae (Chlorella vulgaris, Botryococcus braunii and Chlorella emersonii), each with a different rate of growth - high, medium and low - respectively. The cell density of algae in suspension differentiated through the cultivation time (2, 4, and 8days) and the spectral composition of light. The results showed that the density of cultivation led to change in the photosynthetic apparatus of algae. The differences described between each day of cultivation (2, 4, and 8) in the kinetics of chlorophyll a fluorescence intensity in cells of the algal strains under study probably resulted from the different phases of growth of these cultures. In addition the results showed the beneficial effect of far red light on the photosynthetic apparatus and the growth of biomass in investigated algal strains.

Brassinosteroids improve photosystem II efficiency, gas exchange, antioxidant enzymes and growth of cowpea plants exposed to water deficit

Water deficit is considered the main abiotic stress that limits agricultural production worldwide. Brassinosteroids (BRs) are natural substances that play roles in plant tolerance against abiotic stresses, including water deficit. This research aims to determine whether BRs can mitigate the negative effects caused by water deficiency, revealing how BRs act and their possible contribution to increased tolerance of cowpea plants to water deficit. The experiment was a factorial design with the factors completely randomised, with two water conditions (control and water deficit) and three levels of brassinosteroids (0, 50 and 100 nM 24-epibrassinolide; EBR is an active BRs). Plants sprayed with 100 nM EBR under the water deficit presented significant increases in ΦPSII, qP and ETR compared with plants subjected to the water deficit without EBR. With respect to gas exchange, PN, E and gs exhibited significant reductions after water deficit, but application of 100 nM EBR caused increases in these variables of 96, 24 and 33%, respectively, compared to the water deficit + 0 nM EBR treatment. To antioxidant enzymes, EBR resulted in increases in SOD, CAT, APX and POX, indicating that EBR acts on the antioxidant system, reducing cell damage. The water deficit caused significant reductions in Chl a, Chl b and total Chl, while plants sprayed with 100 nM EBR showed significant increases of 26, 58 and 33% in Chl a, Chl b and total Chl, respectively. This study revealed that EBR improves photosystem II efficiency, inducing increases in ΦPSII, qP and ETR. This substance also mitigated the negative effects on gas exchange and growth induced by the water deficit. Increases in SOD, CAT, APX and POX of plants treated with EBR indicate that this steroid clearly increased the tolerance to the water deficit, reducing reactive oxygen species, cell damage, and maintaining the photosynthetic pigments. Additionally, 100 nM EBR resulted in a better dose-response of cowpea plants exposed to the water deficit.

The functional role of the photosynthetic apparatus in the recovery of Brassica napus plants from pre-emergent metazachlor exposure

Metazachlor is a chloroacetamide herbicide, frequently used in Brassica napus cultivations around the world. Its primary target is the inhibition of very long chain fatty acid biosynthesis. This study included a morphological and physiological screening of hydroponically grown B. napus, exposed to a concentration range of 0, 0.25, 0.50, 0.75 and 1.0kg metazachlor per hectare. The results indicate that within a month after application, growth and development of B. napus are severely affected by low metazachlor doses. At intermediate metazachlor concentrations, loss of phosphorous and potassium from the plant tissues suggests destabilisation of cellular membranes, which may be a direct consequence of metazachlor application. This membrane instability could be indirectly linked with alterations of electron transport and a reduction of carbon assimilation. At increased metazachlor doses of 0.75kga.i.ha(-1), pigment concentrations are strongly reduced. However, chlorophyll fluorescence parameters seem to remain unaffected at metazachlor doses up to 0.75kga.i.ha(-1). At a metazachlor concentration of 1.0kga.i.ha(-1), negative effects are observed on all tested parameters, resulting in limited survival. The results indicate photosynthesis is assured at intermediate metazachlor concentrations for the cost of growth and development. It is clear that photosynthesis plays a key role in the survival strategy of young plants to overcome initially induced chemical stress.

Sensitivity of Four Cyanobacterial Isolates from Tropical Freshwaters to Environmentally Realistic Concentrations of Cr(6+), Cd(2+) and Zn(2.)

Sensitivity of four tropical cyanobacteria viz. Coelosphaerium sp., Synechococcus sp., Oscillatoria sp. and Chroococcus sp. to environmentally relevant concentrations of Cr(6+), Cd(2+) and Zn(2+)was assessed based on fluorescence change as a proxy for growth reduction. At 24 h exposure, the growth reduction inthe cyanobacteria followed the order: Zn(2+) < Cr(6+) ≤ Cd(2+). Of the four cyanobacteria, Synechococcus was the most sensitive for Cr(6+), where as Chroococcus was the most sensitive for Cd(2+)and Zn(2+). Sensitivity was gradually decreased by 96 h implying the acquisition of tolerance by cyanobacteria to heavy metal ions with prolonged exposure.

Environmental risk of combined emerging pollutants in terrestrial environments: chlorophyll a fluorescence analysis

The risk assessment in terrestrial environments has been scarcely studied for mixtures of organic contaminants. To estimate toxicity due to these compounds, an ecotoxicological test may be done with the appropriate organism and biomarker. Photosynthesis is principally performed at photosystem II, and its efficiency is affected by any environmental stress. Consequently, the measure of this efficiency may be a good indicator of toxicity if different parameters are employed, e.g., the quantum efficiency of photosystem II and the photochemical quenching coefficient. We did a series of assays to determine the toxicity of two organic contaminants, ibuprofen and perfluorooctanoic acid, using a higher plant (Sorghum bicolor). The results showed more toxicity for the perfluorinated compound and greater sensibility for the quantum efficiency of photosystem II. Regarding the binary combination, three methods were applied to calculate EC50: combination index, concentration addition, and independent action. Synergistic behavior is the principal toxicological profile for this mix. Therefore, the combination index, which considers interactions among chemicals, gave the best estimation to determine risk indices. We conclude that the inhibition of photosynthesis efficiency can be a useful tool to determine the toxicity of the mixtures of organic pollutants and to estimate ecological risks in terrestrial environments.

Chlorophyll a fluorescence in evaluation of the effect of heavy metal soil contamination on perennial grasses

Chlorophyll a fluorescence gives information about the plant physiological status due to its coupling to the photosynthetic electron transfer chain and to the further biochemical processes. Environmental stresses, which acts synergistically, disturbs the photosynthesis. The OJIP test, elaborated by Strasser and co-workers, enables comparison of the physiological status of plants grown on polluted vs. control areas. The paper shows that the Chl a measurements are very useful tool in evaluating of heavy metal ions influence on perennial grasses, tested as potential phytoremediators. Among 5 cultivars tested, the highest concentration of Cd and Zn ions, not associated with the yield reduction, was detected in the biomass of tall fescue cv. Rahela. Chl a fluorescence interpreted as double normalized curves pointed out Rahela as the outstanding cultivar under the HM ions stress.

Regulation of photosynthetic electron transport and photoinhibition

Photosynthetic organisms and isolated photosystems are of interest for technical applications. In nature, photosynthetic electron transport has to work efficiently in contrasting environments such as shade and full sunlight at noon. Photosynthetic electron transport is regulated on many levels, starting with the energy transfer processes in antenna and ending with how reducing power is ultimately partitioned. This review starts by explaining how light energy can be dissipated or distributed by the various mechanisms of non-photochemical quenching, including thermal dissipation and state transitions, and how these processes influence photoinhibition of photosystem II (PSII). Furthermore, we will highlight the importance of the various alternative electron transport pathways, including the use of oxygen as the terminal electron acceptor and cyclic flow around photosystem I (PSI), the latter which seem particularly relevant to preventing photoinhibition of photosystem I. The control of excitation pressure in combination with the partitioning of reducing power influences the light-dependent formation of reactive oxygen species in PSII and in PSI, which may be a very important consideration to any artificial photosynthetic system or technical device using photosynthetic organisms.

Changes in chlorophyll a fluorescence of glyphosate-tolerant soybean plants induced by glyphosate: in vivo analysis by laser-induced fluorescence spectroscopy

A significant increase in the use of the herbicide glyphosate has generated many questions about its residual accumulation in the environment and possible damage to crops. In this study, changes in chlorophyll a (chl-a) fluorescence induced by glyphosate in three varieties of glyphosate-resistant soybean plants were determined with an in vivo analysis based on a portable laser-induced fluorescence system. Strong suppression of chl-a fluorescence was observed for all plants treated with the herbicide. Moreover, the ratio of the emission bands in the red and far-red regions (685 nm/735 nm) indicates that the application of glyphosate led to chlorophyll degradation. The results also indicated that the use of glyphosate, even at concentrations recommended by the manufacturer, suppressed chl-a fluorescence. In summary, this study shows that fluorescence spectroscopy can detect, in vivo, very early changes in the photosynthetic status of transgenic soybeans treated with this herbicide.

Romero-Troncoso R, Guevara-Gonzalez RG, Millan-Almaraz JR. Instrumentation in developing chlorophyll fluorescence biosensing: a review

Chlorophyll fluorescence can be defined as the red and far-red light emitted by photosynthetic tissue when it is excited by a light source. This is an important phenomenon which permits investigators to obtain important information about the state of health of a photosynthetic sample. This article reviews the current state of the art knowledge regarding the design of new chlorophyll fluorescence sensing systems, providing appropriate information about processes, instrumentation and electronic devices. These types of systems and applications can be created to determine both comfort conditions and current problems within a given subject. The procedure to measure chlorophyll fluorescence is commonly split into two main parts; the first involves chlorophyll excitation, for which there are passive or active methods. The second part of the procedure is to closely measure the chlorophyll fluorescence response with specialized instrumentation systems. Such systems utilize several methods, each with different characteristics regarding to cost, resolution, ease of processing or portability. These methods for the most part include cameras, photodiodes and satellite images.

Rapid effects of diverse toxic water pollutants on chlorophyll a fluorescence: variable responses among freshwater microalgae

Chlorophyll a fluorescence of microalgae is a compelling indicator of toxicity of dissolved water contaminants, because it is easily measured and responds rapidly. While different chl a fluorescence parameters have been examined, most studies have focused on single species and/or a narrow range of toxins. We assessed the utility of one chl a fluorescence parameter, the maximum quantum yield of PSII (F(v)/F(m)), for detecting effects of nine environmental pollutants from a range of toxin classes on 5 commonly found freshwater algal species, as well as the USEPA model species, Pseudokirchneriella subcapitata. F(v)/F(m) declined rapidly over <20 min in response to low concentrations of photosynthesis-specific herbicides Diuron(®) and metribuzin (both <40 nM), atrazine (<460 nM) and terbuthylazine (<400 nM). However, F(v)/F(m) also responded rapidly and in a dose-dependent way to toxins glyphosate (<90 μM), and KCN (<1 mM) which have modes of action not specific to photosynthesis. F(v)/F(m) was insensitive to 30-40 μM insecticides methyl parathion, carbofuran and malathion. Algal species varied in their sensitivity to toxins. No single species was the most sensitive to all nine toxins, but for six toxins to which algal F(v)/F(m) responded significantly, the model species P. subcapitata was less sensitive than other taxa. In terms of suppression of F(v)/F(m) within 80 min, patterns of concentration-dependence differed among toxins; most showed Michaelis-Menten saturation kinetics, with half-saturation constant (K(m)) values for the PSII inhibitors ranging from 0.14 μM for Diuron(®) to 6.6 μM for terbuthylazine, compared with a K(m) of 330 μM for KCN. Percent suppression of F(v)/F(m) by glyphosate increased exponentially with concentration. F(v)/F(m) provides a sensitive and easily-measured parameter for rapid and cost-effective detection of effects of many dissolved toxins. Field-portable fluorometers will facilitate field testing, however distinct responses between different species may complicate net F(v)/F(m) signal from a community.